LG | AS35GVGG0 | LG AS35GVGG0 Owner’s Manual

ENGLISH
OWNER’S MANUAL
LG
AIR PURIFIER
Please read this manual carefully before operating your set and
retain it for future reference.
Model name : AS35GVGG0
P/NO : MFL68181318
www.lg.com
2 SAFETY PRECAUTIONS
ENGLISH
SAFETY PRECAUTIONS
The precautions related with the safety shown below are to prevent unexpected hazard and damage through safe and accurate operation of the product.
! WARNING
If not followed, It may cause death or major injury to the user.
! CAUTION
If not followed, it may cause injury to the user or property damage.
! This symbol will alert you to any product detail or operation that could lead to a
safety hazard. Read carefully and follow the instructions to avoid danger.
Installation
• Do not arbitrarily change or extend the power line.
It may cause fire and electric shock.
• When the socket is damaged or loosened, do not use it.
It may cause fire and electric shock.
• Do not arbitrarily disassemble, repair, or modify the product.
It may cause fire and electric shock.
• Do not use the product at the location where moisture or oil are prevailed such as
toilet or bathroom, laundry, etc.
It may cause fire and electric shock.
• When using the multi-socket, do not use several appliances at the same time.
Excessive use of electric power may cause fire and electric shock.
• When gas is leaked, perform the ventilation by opening the window before operating the air purifier.
Otherwise, it may cause the explosion, fire, and burn.
• Do not store or use combustible gas or flammable material near the product.
It may cause fire or product failure.
• If abnormal noise, odor or smoke is coming out from the product, pull out the
power plug and contact the customer care center.
Otherwise, it may cause fire and electric shock.
• Do not place heavy object on the power cord or have power cord squashed under
equipment.
It may cause fire and electric shock.
• Carry out the installation by avoiding direct sunlight, heating appliance, and dampness.
Otherwise, it may cause the electric shock, fire, and failure.
• Do not place fire source near to the product.
It may cause fire.
SAFETY PRECAUTIONS 3
• Insert securely the power plug up to the end of its plug so that it will not be
shaken.
If connection is unstable, it may cause fire.
• Do not arbitrarily change or extend the power line.
It may cause fire and electric shock.
• Do not allow water to be infiltrated into the product.
It may cause fire and electric shock.
• Do not place rug etc. on the power cord.
If heavy object is placed on the rug because the cord is invisible, it may cause fire and
electric shock.
• Do not touch the power plug with wet hand.
It may cause electric shock and injury.
• Do not remove the plug by pulling its power cord section.
It may cause fire and electric shock.
• Do not place obstacles at the air suction port or discharge port of the product.
It may cause the product failure.
• Do not use the product where water can be easily splashed.
It may cause fire or electric shock.
• Do not allow children to climb up the product or arbitrarily touch it.
It may cause failure, injury.
• Do not move the product while it is under operation.
It may cause fire and electric shock or partial damage of the product may occur.
• Do not put hands , glue or metal at the air suction port or discharge port of the
product.
It may cause product damage, injury, or electric shock.
• Do not install the product at the location where excessive industrial oil smoke or
metallic dust is prevailed.
It may cause fire and product failure.
• Do not move the product by grabbing any other parts other than the handle of the
product.
The product may partially be damaged.
• If product repair is required, contact the service center.
Arbitrary disassemble or repair may cause electric shock or fire.
• If the product is flooded, make sure to contact the service center.
There is a risk of electric shock or fire.
• Do not apply any impact on the front panel.
It may cause injury, product damage or electric shock.
• Do not let children or people that are difficult to operate the device safely alone
operate the product.
It may cause injury or electric shock.
• If the power cord is damaged, request for repair to the service technician to prevent any risk.
It may cause fire, electric shock or product failure.
ENGLISH
Operation
4 SAFETY PRECAUTIONS
ENGLISH
! CAUTION
Installation
• When installing near to TV or audio, provide more than 1 m of distance with them.
TV or audio may have malfunction.
• When pulling out the power plug, pull out by grabbing the head of the plug.
Otherwise, it may cause injury or electric shock.
• In kitchen, do not use the product as ventilation fan or hood for range.
The life will be shortened.
• During the cleaning, make sure to stop the product and pull out the power plug.
The fan is rotating at a high speed, and it may cause injury.
• Avoid places near fire, heating appliances, or under direct sunlight.
It may cause fire.
• Do not use the product to remove toxic gas such as carbon monoxide.
It may cause product failure.
• Install the product at the flat location and do not throw it down or give impact.
It may cause product failure.
• Provide distance of more than 1.5 m from lighting appliance and more than around
10 cm from the wall.
Otherwise, it may cause the product discoloration and the cleaning capability may be
deteriorated.
• Use only AC 230 V.
Otherwise, it may cause fire and electric shock.
• Do not install in transportations (vehicle/vessel, etc.).
It may cause failure.
Operation
• Do not use the product for special usages/places such as preservations of
animal/plant, precision equipment, art pieces, etc.
It may cause property damage.
• Do not clean with strong detergents such as solvents, but use soft cloth.
It may cause fire and product deformation.
• If it is not used for a long period of time, pull out the power plug.
Otherwise, it may cause product failure or fire.
• Do not operate with wet hand.
It may cause electric shock.
• Do not climb up or place object on Air Purifier.
It may cause injury by falling or flip over.
• Make sure to insert the Dual Protection Filter, and clean the filter every month.
Otherwise, it may cause shortening of the filter life.
• Be sure to insert all the filters before the use and perform regular cleaning of the
filter.
Otherwise, it may cause product failure.
SAFETY PRECAUTIONS 5
ENGLISH
• Install the product at the flat location and do not throw it down or give impact.
It may cause fire or product failure.
• Do not use the power cord as tied.
Heat generation may cause fire.
• Start cleaning and mending after pulling out the power plug and when the fan
stops rotating.
Otherwise, you may get electric shock or injury.
• Do not use it as a ventilator.
The product life may be shortened.
• Completely dry the Dual Protection Filter in a shadow until there is no moisture
after washing.
Otherwise, It may cause failure.
• Do not insert inflammables inside the product.
It may cause fire or product failure.
• Do not let the moisture emitted from the humidifier directly touch the product.
It may cause electric shock, fire, or product failure.
• Do not open the backside panel while product is in operation.
Fan is rotating, and it has a risk of injury.
6 TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
2 SAFETY PRECAUTIONS
15 INSTALLATION METHOD
15
7 SIMPLE USAGE METHOD
8 NAME OF EACH PART
8
Front
8
Backside
9
Operation indicator part and control part
10
Filter system
11 USAGE METHOD
11
Air cleaning operation
11
Jet clean operation
12
Ionizer operation
12
Auto Restart Function
13
Sleep operation
14
Lock Function
14
Filter Check lamp
How to install the filter before using it
16 CLEANING METHOD
18
How to clean various filters
18
Exterior Cleaning Method
19 STORAGE METHOD
20 TROUBLESHOOTING BEFORE CALLING FOR SERVICE
21 PRODUCT SPECIFICATION
SIMPLE USAGE METHOD 7
Installation Place Selection
Main Unit
• Place for easy power connection (close to socket)
• Place without obstacles interfering with indoor air suction near the inlet.
• Places with horizontal surface and rich air circulation
! WARNING
If Air Purifier is installed in transportations (vehicle/vessel, etc.), there may be a
problem with the product, so do not install in transportations.
Use Air Purifier as follows.
During the cooking of the food with severe odor such as fish, reduce the use of Air
Purifier if possible.
• The oil emitted during the cooking may influence the performance or life of the filter,
and odor may smear into the filter.
When you sleep, maintain at least 1 m from the Air Purifier.
• Air purifier fan speed is not strong, after fallen asleep would feel cold.
Do not place in the corner edge.
• Avoid to install at places surrounded by furniture, appliances etc. or in the edge corner.
Install in the edge corner may cause difficulty to purify indoor air.
ENGLISH
SIMPLE USAGE METHOD
8 NAME OF EACH PART
ENGLISH
NAME OF EACH PART
Front
1. Operation part
2. Cleanliness indicator lamp
It is the lamp indicating the cleanliness of the indoor air. It displays the cleanliness
according to the indoor cleanliness detected by the odor sensor.
Indicator
(Contaminated) Red → Orange → Yellow → Green (Clean)
* After the start of the operation, during the sensor stabilization period (2 minutes),
Indicator lamp glows in white color. After the stabilization, indoor cleanliness is displayed. (The Indicator displayed for each product may be different according to the
initial detection value.)
1
2
Backside
1. Handle
2. Back panel
3. Power cord
4. Sensor part (odor sensor)
5. Air cleaning filter
(Dual Protection Filter + Allergy HEPA
Filter Powered by 3M™ Tech + Triple
Care Filter)
4
1
5
2
3
* Shape of the power cord can be different by country.
NAME OF EACH PART 9
ENGLISH
Operation indicator part and control part
6
1
2
3
1. Power On/OFF Button : It is used to
start and stop the product operation.
2. Speed Button : It controls the wind
amount.
3. Jet Clean Button : It purifies the indoor air more quickly for a certain
time.
4. Ionizer Button : It generates anion to
remove various bacteria in the indoor
air.
5. Sleep Button : It controls wind amount
for good night's sleep. The Cleanliness
indicator and other LEDs will be turned
OFF (except Speed LED).
4
7
5
6. Lock Function : It used to prevent unwanted operation by children or other
causes.
7. Filter Check lamp : When the Filter
Check lamp is turned on, check the
contamination status of the filter, and
if the contamination is severe, clean or
replace the filter
10 NAME OF EACH PART
ENGLISH
Filter system
1
2
1. Dual Protection Filter : It removes big
dusts to prolong the life of the Allergy
HEPA Filter Powered by 3M™ Tech.
2. Allergy HEPA Filter Powered by 3M™
Tech : It removes the fine particles
such as dead tick, pollen, cigarette
smoke (particle), fine dust, mote, animal fur, etc. and performs strong sterilization against the bacteria in the
indoor air.
3. Triple Care Filter : It is a comprehensive deodorization filter that removes
cigarette smoke (odor), residential
waste odor, animal fur odor, NO2 rest
room odor, alkali & acidic odor, and
volatile organic compound (VOCs).
3
• The replacement cycle of the Triple Care
Filter and Allergy HEPA Filter Powered
by 3M™ Tech may be different according to the usage environment.
• During the replacement, filter case is
not enclosed. Do not throw it away.
Triple Care Filter Triple Care Filter case
! NOTE
• If you request filter cleaning to the
service center, we will clean it with a
charge for actual cost.
USAGE METHOD 11
Air cleaning operation
It purifies the indoor air with clean and fresh air.
1. Press Power On/OFF button.
- With the buzzer sound, it starts the operation with the operation mode indicator
LED and Indicator lamp turned on.
2. Push the Speed button to select the desired wind amount.
- You can press Speed to sequentially set automatic → Low → Mid → High → automatic.
- It is set to automatic at the initial operation. (In automatic operation mode, wind
amount is automatically controlled according to the contamination level of the indoor air.)
- After the start of the operation, during the sensor stabilization period (2 minutes),
Indicator lamp glows in white color. After the stabilization, indoor cleanliness is displayed.
Colors according to the cleanliness
(Contaminated) Red → Orange → Yellow → Green (Clean)
Jet clean operation
For a certain time, it purifies the indoor air more quickly.
1. Press Power On/OFF button.
2. Press Jet clean button
- It operates strongly for 30 minutes when the Jet clean function is selected.
- If the Jet clean function is selected during the sleep mode, the sleep mode is disabled.
! NOTE
• This mode does not have auto restart feature.
ENGLISH
USAGE METHOD
12 USAGE METHOD
ENGLISH
Ionizer operation
It emits anion to remove various bacteria.
1. Press Power On/OFF button.
2. Press Ionizer button.
- Every time you press the button, it changes in the order of Ionizer → reset function → Ionizer.
① Ion Cluster
creation by
combination of polarity of
the water
molecules
in the air
② Sterilization
ion surrounds various harmful
material
③ Weak OH
(hydroxyl)
generation
by each
chemical
reaction
④ Reaction of
hydroxyl
(OH) to the
harmful
material
⑤ Clean air
with harmful material
removed
Auto Restart Function
When the power resumes after failure, the product will memorize the previous operation status and restart with the same settings automatically.
USAGE METHOD 13
It provides quiet indoor atmosphere during the sleep.
1. Press Power On/OFF button.
2. Press Sleep button.
- For good night's sleep, the Cleanliness indicator and other LEDs are turned OFF
(except Speed LED).
3. Select Speed in Sleep
- If you press the Sleep button, Fan speed is automatically set as Low for the first 1
hour, and then Speed is controlled according to the Air quality.
- Every time you press Speed button in Sleep, the fan speed changes sequentially.
(Auto → Low → Mid → High → Auto → ***)
4. How to reset Sleep: Press Sleep button one more time.
! NOTE
1. If Ionizer was turned ON before selecting Sleep Mode, the Ionizer LED will glow for
3 Seconds when Speed is changed.
2. Ionizer can be additionally turned ON / OFF during Sleep mode.
3. Pressing Jet Clean disables the Sleep mode.
ENGLISH
Sleep operation
14 USAGE METHOD
ENGLISH
Lock Function
1. Press Power On/OFF button.
2. Press Ionizer button and Sleep button together for 3 seconds.
- When you press any button during Lock Function, the product does not work, but
he buzzer will beep three times.
- You can protect the product from the unwanted operation by children or by other
causes.
- When you reset the function, press Ionizer button and Sleep button together for 3
seconds or longer once again.
- When the product operation button is not working, check the lock indicator in the
operation part, and reset the lock setting.
- If you pull out the power plug in lock setting status, the lock setting is reset.
* In a stopped state, you can set lock/unlock function by pressing Ionizer button and
Sleep button together for 3 seconds.
Filter Check lamp
1. When the Filter Check lamp is turned on, turn off the power of the product in operation by pressing Power On/OFF button, and separate the power plug from the
socket.
2. Open the backside panel of the product to check the filter, and if it is contaminated, clean or replace the filter. For filter cleaning and replacement, refer to page
16.
<Filter Check and initialization method (How to turn off the Filter Check lamp)>
Method 1. Separate the power cord from the socket.
Method 2. Press Jet Clean button and Sleep button together for 3 seconds or longer.
* If it passes 24 hours, Filter Check lamp is automatically turned off, so replace the filter in time.
INSTALLATION METHOD 15
ENGLISH
INSTALLATION METHOD
How to install the filter before
using it
4. Mount the filter with the vinyl packaging removed on the main unit.
Remove vinyl packaging of the filter before using it.
1. Pull and open the backside panel.
5. Mount the filter by matching the
backside panel to the bottom part.
2. Separate the filter from the main
unit.
6. Use the product on a flat place without obstacles.
3. Remove the vinyl packaging of the filter.
Remove
vinyl
! CAUTION
• If the vinyl packaging of the filter is
not removed, air will not come out
from the product.
16 CLEANING METHOD
ENGLISH
CLEANING METHOD
1. If the product is in operation, press
Power On/OFF button to turn off the
power. Separate the power plug from
the socket.
2. Pull the filter handle to separate from
the main unit.
There may be a lot of dust in the filter
net. Before separating the filter set,
move the filter to a place for easy
cleaning.
3. Grab the filter case and pull and separate the filter case while pressing the
orange Dual Protection Filter handle
downward.
* The dust on the Dual Protection Filter
may fall, so place newspaper, etc. underneath it. Clean the Dual Protection Filter with a vacuum cleaner or brush, etc.,
and if the contamination is severe, wash
with water.
Do not force to separate the Dual Protection Filter with a lot of sticking dust,
but wash it after removing the big dust
with home vacuum cleaner first.
- Completely dry the washed Dual Protection Filter in a shadow.
- If it is used without completely drying it,
it may cause odor.
CLEANING METHOD 17
5. Separate the Triple Care Filter. (During the Filter Check)
4. Please separate the Allergy HEPA Filter Powered by 3M™ Tech. (During
the Filter Check)
6. After cleaning and Filter Check, assemble the filter in the reverse order
and insert so that the filter handle is
located at the top of the product.
7. Mount the backside cover by matching to the bottom part.
ENGLISH
* Do not wash Allergy HEPA Filter Powered by 3M™ Tech and Triple Care Filter
with water, but it needs to be replaced
when it is severely contaminated. Be
careful not to have filter touch water
while using the product.
* The Filter Check cycle may be different
according to the usage environment.
18 CLEANING METHOD
ENGLISH
How to clean various filters
Filter types Classification Cleaning cycle
Dual Protection Fil- For washing
ter
About 1
month cycle
cleaning
Allergy
HEPA Filter PowAbout 12
ered by For replace- months cycle
ment
3M™ Tech
replacement
Triple Care
Filter
Cleaning Method
Clean the Dual Protection Filter
with a vacuum cleaner or brush,
etc., and if the contamination is
severe, wash with water.
Refer to
Figure 1
* The replacement cycle for Allergy HEPA
Filter Powered by 3M™ Tech and Triple
Care Filter may be different according to
the usage environment.
• If you need more filters, please contact the LG service center.
①
Exterior Cleaning Method
Soak soft cloth in a warm water, squeeze
it, and wipe the Air Purifier. Especially,
dust may be accumulated near the air
suction inlet. Please clean it periodically.
! CAUTION
• Do not wipe the main unit operation part and display part with alkali detergent.
• Do not wipe the surface of the Air
Purifier using sulphuric acid, hydrochloric acid, or organic solvent
(thinner, lamp oil, etc.) or attach
sticker, etc. on it. It may damage the
surface.
• Wipe with soft cloth during the
cleaning. It may damage the exterior by scratch, etc.
• Do not let water enter the product
during the cleaning. During the
cleaning, make sure to stop the
product and pull out the power
plug. (Make sure to check whether
the fan is moving.)
STORAGE METHOD 19
ENGLISH
STORAGE METHOD
Storage method
If the product is not used for a long period of time, store it in a shadow without
moisture.
After operating the Air Purifier in a
sunny day for 1 hour or more, and
stop the operation by pressing Power
On/OFF button.
Thoroughly clean the Air Purifier main
unit and store it well. When it is stored
for a long period of time, carefully pack
and store with vinyl cover, etc. so that
dust or foreign object may not enter inside the product.
• Wipe with soft cloth during the cleaning. It may damage the exterior by
scratch, etc.
• Store at a cool place avoiding the direct
sunlight.
Pull out the power plug.
Power plug
* Shape of the powercord can be different by country.
Separate the filter from the product,
seal it well with vinyl, etc., and store
at a cool place without direct sunlight.
• If the filter is stored in a moist place in a
rainy season, etc., it causes odor generation.
Do not store at a place with a lot of
moisture or or exposed to direct sunlight.
• It causes odor generation, deformation,
malfunction, etc.
20 TROUBLESHOOTING BEFORE CALLING FOR SERVICE
ENGLISH
TROUBLESHOOTING BEFORE CALLING FOR SERVICE
Symptom
It does not
start at all.
Check
• Isn’t the power plug pulled
out?
• Isn’t the voltage too low?
Actions
– Insert correctly into the socket.
– Check if it is 230 V.
Wind amount • Is the Dual Protection Filter
clogged?
is small and
there is a
• Is dust accumulated on the
noise.
allergy HEPA filter?
– Clean the Dual Protection Filter.
• Is the indoor contamination
severe?
• Is dust accumulated on the
dual protection filter?
• Is dust accumulated on the
Air purificaallergy HEPA filter?
tion does not
•
Isn’t
the usage place too
work well.
wide?
– Ventilate first before usage.
– Replace the allergy HEPA filter.
– Clean the dual protection filter.
– Replace the allergy HEPA filter
– Use the product appropriate for the
usage area. (Avoid places with fluent ventilation such as entrance, window, etc.)
• Are there obstacles nearby? – Please remove obstacles.
• Is the product installed in a – Please change the installation location.
corner?
• Is it used at a place with a lot – The air cleaning function may be deof smoke or odor?
graded where there are a lot of
There is a
smoke or odor. Please use the Air Pustrange odor
rifier after ventilation.
coming out of
air outlet.
• Is there abnormal odor from – Please replace the Triple Care Filter.
the Triple Care Filter?
• Isn’t red light turned on in
There is an
the Indicator lamp?
odor, but the
Indicator lamp
does not
change.
– Indicator lamp indicates the cleanliness through the odor sensor. Odor
sensor may not respond to food odor
since it is a sensor detecting contamination gas. But the odor is removed
by the deodorization filter.
• Doesn’t the color change
– If the quantity of odor is greater than
The Indicator
even if it is moved to a clean
the ability that can be processed by
the Air Purifier, the display may not
lamp is contin- room?
change.
uously on with
red color.
• Did you use spray near the
– Do not use sprays near the Air PuriAir Purifier?
fier.
Button does • Is the lock lamp on the oper- – Push Ionizer & Sleep button for 3
not work well. ation part turned on?
sec. to reset the lock setting.
PRODUCT SPECIFICATION 21
ENGLISH
PRODUCT SPECIFICATION
Depth
Width
Height
The external dimension, design and product standard can change to improve the quality
of the product.
Model Name
AS35GVGG0
Power Supply
230 V ~ 50 Hz
* CADR (m3 / h)
357 (Jet Clean)
282 (High)
Product Size (width x height x depth)
* CADR(Clean Air Delivery Rate)
470 mm x 450 mm x 230 mm
22
ENGLISH
Download PDF

advertising