LG | LWA3GP3A1 | LG LWA3BP3A1 Owner’s Manual

ROOM AIR
CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WINDOW MOUNTED
For Window AC Domestic Models
P/No- MFL37725109_V3
Room Air Conditioner Owner’s Manual
TABLE OF CONTENTS
FOR YOUR RECORDS
Safety Precautions
Safety Precautions ..................................................3
Write the model and serial number here:
Model #
Operating instructions
Caution while operating Air Conditioner ..................4
About the Controls on the Air Conditioner ...............8
Additional controls and important information........12
Care and Maintenance ..........................................13
Serial #
You can find them on a label on the side of each unit.
Dealer's Name
Date Purchased
n Staple your receipt to this page in the event you need
it to prove date of purchase or for warranty issues.
Installation Instructions
Installation Instructions............................................14
READ THIS MANUAL
Troubleshooting tips
Before You Call for Service.....................................16
10 Easy steps to find AC Tonnage ........................17
Inside you will find many helpful hints on how to use
and maintain your air conditioner properly. Just a little
preventive care on your side can save you a great deal
of time and money over the life of your air conditioner.
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first, you may not need to call
for service at all.
PRECAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Please install your air-conditioner by company
authorised service franchisee / authorised service
and sales dealer.
• The air conditioner is not intended for use by young
children or Infirm without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only,
using only genuine replacement parts.
We recommend usage of voltage stabilizer with
high / low voltage cut off in areas having voltage
fluctuations.
-2-
AC TONNAGE
STABILIZER KVA
(3-STEP STABILIZER)
0.75
1.0
1.5
2.0
3
3
4
5
Safety Precautions
To prevent injury to the user or other people and property damage, the following instructions
must be followed.
n Incorrect operation due to ignorance instruction will cause harm or damage. The seriousness
is classified by the following indications.
WARNING
This symbol indicates the possibility of death or serious injury.
CAUTION
This symbol indicates the possibility of injury or damage to properties only .
n Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
WARNING
Do not turn ON the MCB/Breaker or power under condition of front panel, cabinet,
top cover, control box cover are removed or opened. Otherwise, it may cause fire,
electric shock, explosion or death.
n Installation
Don’t use a power cord, a
plug or a loose socket which
is damaged.
• Otherwise it may cause fire
or electrical shock.
Always plug into a grounded
electrical outlet.
• Otherwise it may cause fire
or electrical shock.
Do not modify or extend the
power cord length.
• Otherwise it may cause electric
shock or fire due to heat generation.
Do not disassemble or modify
products.
Be cautious when unpacking
and installing.
Do not use the power cord near
flammable gas or combustibles
such as gasoline , benzene,
thinner, etc.
• Otherwise it may cause failure
• Sharp. edges may cause
injury
.
• Otherwise it may cause explosion
or fire
and electric shock.
-3-
CAUTION WHILE OPERATING AIR CONDITIONER
n Operation
Do not place heavy object
on the power cord and take
care so that the cord should
not be pressed.
• There is danger of fire or electric
shock.
Do not share the outlet with
other appliances.
Take the power plug out if
necessary, do not touch
it with wet hands.
• Otherwise it may cause electric
• Otherwise it may cause fire
shock or fire due to heat generation. or electrical shock.
Do not place the power cord
near a heater .
Do not allow water to run
into electric parts.
Use a soft cloth to clean.Do
not use wax, thinner , or a
strong detergent.
• Otherwise it may cause fire and
electric shock.
• Otherwise It may cause failure
of machine or electric shock.
• The appearance of the air
conditioner may deteriorate,
change color, or develop surface
flaws.
Unplug the unit if strange
sounds, odors, or smoke
come from it.
• Otherwise it may cause fire and
electric shock accident.
Ventilate the room well when
using this appliance
together with a stove, etc.
Do not open the suction
inlet grille of the product
during operation.
If water enters the product, turn
off the the power switch of the
main body of appliance.Contact
service center after taking the
power-plug out from the socket.
• Otherwise it may cause electrical
shock and failure .
After turn OFF the unit and
circuit breaker than start
cleaning the unit
• An oxygen shortage may occur. • Since the fan rotates at high
speed during operation, it may
cause injury.
-4-
Turn off the main power
switch when not using it for
a long time .
• Prevent accidental startup and
the possibility of injury.
CAUTION WHILE OPERATING AIR CONDITIONER
Do not operate or stop the
unit by inserting or pulling
out the power plug.
Do not damage or use an
unspecified power cord.
• Otherwise it may cause electric
• Otherwise it may cause electric
shock or fire due to heat generation. shock or fire.
Hold the plug by the head
when taking it out.
• Otherwise it may cause electric
shock and damage.
When gas leaks, open the
window for ventilation
before operating the unit.
• Otherwise it may cause
explosion, and fire .
Do not operate with wet
hands or in damp
envir onment.
• Otherwise it may cause electric
shock.
Never touch the metal parts
of the unit when removing
the filter .
• They are sharp and may cause
injury.
CAUTION
n Installation
Install the product so that the noise or hot wind
from the outdoor side of unit may not cause
any damage to the neighbors.
• Otherwise it may cause dispute with the
neighbors.
Keep level parallel in installing the product.
• Otherwise it may cause vibration or water
leakage.
-5-
CAUTION WHILE OPERATING AIR CONDITIONER
n Operation
Do not put a pet or house
plant where it will be
exposed to direct air flow.
• Otherwise it may cause
.
injury
Do not step on the
indoor/outdoor unit and do
not put anything on it.
• Otherwise it may cause an
injury through dropping of the
unit or falling down.
Do not block the inlet or
outlet of air flow.
• Otherwise it may cause product
.
failure
Always insert the filter
securely.
Clean it every two weeks.
• Operation without filters will
cause failure.
Be cautious not to touch the
sharp edges when
installing.
Avoid excessive cooling and
perform ventilation
sometimes.
• Otherwise it may cause injury.
• Otherwise it may do harm to
your health.
-6-
Use a soft cloth to clean. Do
not use wax,thinner,or a
strong detergent.
• The appearance of the air
conditioner may deteriorate,
change color, or develop surface
flaws.
Do not drink water drained
from air conditioner.
• It contains containments and will
make you sick.
Do not insert the hands or
bars through the air inlet or
outlet during operation.
• Otherwise it may cause
personal injury.
vius iqjkus midj.k dk fuiVku ¼bZ&vif’k"V fu;e ds vuqlkj½
Disposal of your old appliance (as per e-waste Rules)
1. When this crossed out wheeled bin symbol is depicted on the product
and its operator’s manual, it means the product is covered by the ewaste Management and Handling Rules , 2011 and are meant to be
recycled, dismantled, refurbished or disposed off.
2. Dos
a. The product is required to be handed over only to the authorized
recycle for disposal.
b. Keep the product in isolated area, after it becomes non-functional/
un-repairable so as to prevent its accidental breakage.
Don’t
a. The product should not be opened by the user himself/herself, but only by authorized
service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/
kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under Environment
(Protection) Act 1986 .
4. Hazards of improper handling or accidental breakage
a. If batteries are disposed incorrectly, it can greatly harm the environment. The chemical
by-products are hazardousT
. he metals and chemicals found in batteries can mix into
soil which may be hazardous to humans, plants and animals. If thrown in fire, they can
cause blast and release toxic gases which may be harmful for health.
b. The refrigerant (R-22) used can be combustible at low pressure. The potential health
effects of over exposure is dizziness, headache and heart irregularities
5.To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this
appliance, please contact Toll Free No.1800-180-9999 for details. All collection centre
and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd. merely
as a facilitator.
For more detailed information , please visit : http://www.lg.com
1- tc bl dkVs x;s ifg;s okys fcu dk fpº+u fdlh midj.k vkSj blds vksisjVj dh
iqfLrdk ds lkFk layXu gksrk gSa rks bldk eryc gS fd bls "bZ&vif'k"V" ¼izca/ku
vkSj gFkkyu½ fu;e 2011 ds vUrxZr lfEefyr fd;k x;k gS] vkSj bls
uohuhdj.k] fo?kVu vkSj fuiVku ds fy, cuk;k x;k gSA
2- djsa&
d& midj.k dks flQZ vf/kd`r iqu% uohuhdj.kdrkZ dks gh fuiVkj.k djus gsrq
gLrkarfjr djsaA
[k& tc midj.k dk;Zjr u gks bls vyx {ks= esa j[kas rkfd midj.k ls gksus okyh
nq?kZVukvks ls cpk tk ldsA
uk djsa&
d& bl midj.k dks Lo;a/[kqn ugha [kksyuk pkfg, ! midj.k dks dsoy vf/kd`r vf/kdkjh ds }kjk gh
[kksyk tkuk pkfg,A
[k&bl midj.k dks iqu% fcØh ds fy, fdlh Hkh dckM+hokyk@Hkaxkj okyk@vukf/kd`r laLFkk dks u nsaA
x& bl midj.k dks fdlh ?kjsyw vif'k"V lkeku ds lkFk feykdj u j[ksaA
?k& midj.k ds cnys gq, ;k vkrafjd iqjtks dks [kqys {ks= esa u j[ksaA
3- ;fn fdlh vukf/kd`r foHkkx ;k O;fDr ds }kjk fuiVkj.k fd;k tkrk gS rks ;g i;kZoj.k ¼lqj{kk½ /kkjk
1986 ds vUrxZr vkrk gSA
4- nq?kZVukxzLr VwV@QwV rFkk vO;ofLFkr j[k&j[kko ls cps A
d& ;fn cSVfj;ksa dk fuiVkj.k v'kq) :i ls dj jgs gaS] rks ;g okrkoj.k dks cgqr uqdlku igqqWpk ldrk
gSaA jklk;fud midj.k [krjukd gksrs gaSA tks jlk;u vkSj /kkrq cSVfj;ksa esa ik, tkrs gaS] bls feV~Vh esa
feykus ij ;g euq";ksa] ikS/kksa vkSj i'kqvksa ds fy, [krjukd gks ldrh gaSA ;fn bls vkx esa Qsadrs gaS rks ;s
foLQksV dj ldrh gaS vkSj ;s tgjhyh xSlsa ns ldrk gS tks LokLF; ds fy, gkfudkjd gaSA
[k& jsÝhtjsaV ¼R-22½ de ncko ij ngu'khy gks ldrh gaS rFkk blls LokLF; ij nqLizHkko iM+ ldrk gS
tSls pDdj vkuk] flj nnZ vkSj g`n; xfr :dukA
5- mijksDr inkFkksZ ds fuiVkju ds fy, utnhdh fuiVkju laLFkku ¼ladh.kZ {ks=½ esa dkWy djsaA vf/kd
tkudkjh ds fy, gekjs Vksy Ýh uEcj 1800-180-9999 ij dkWy djsaA lHkh laxzg.k dsUnz o fid&vi
dh lqfo/kk,a FkMZ&ikVhZ ls tks "LG Electronics India Pvt. Ltd" dks viuh lsok,a iznku dj jgh gksa]
ls djok,aA
vf/kd tkudkjh ds fy, ns[ksa osclkbV % http://www.lg.com
Before Operation
Preparing for Operation
1.
2.
3.
4.
5.
6.
Contact an installation specialist for installation.
Plug in the power plug properly.
Use a dedicated circuit.
Do not use an extension cord.
Do not start/stop operation by plugging/unplugging the power cord.
If the cord/plug is damaged, replace it with only an authorized replacement part.
Usage
1. Being exposed to direct airflow for an extended period of time could be
hazardous to your health. Do not expose occupants, pets, or plants to direct
airflow for extended periods of time.
2. Due to the possibility of oxygen deficiency, ventilate the room when used
together with stoves or other heating devices.
3. Do not use this air conditioner for non-specified special purposes (e .g.
preserving precision devices, food, pets, plants, and art objects). Such usage
could damage the items.
Cleaning and Maintenance
1. Do not touch the metal parts of the unit when removing the filter. Injuries can
occur when handling sharp metal edges .
2. Do not use water to clean inside the air conditioner. Exposure to water can
destroy the insulation, leading to possible electric shock.
3. When cleaning the unit, first make sure that the power and circuit breakers are turned.
off. The fan rotates at a very high speed during operation. There is a
possibility of injury if the unit's power is accidentally triggered on while
cleaning inner parts of the unit.
Service
For repair and maintenance, contact your authorized service dealer.
-7-
*
*
F
F
F
F
The THERMOSTAT / TEMPERATURE is used to maintain the room temperature. The
compressor will cycle ON and OFF to keep the room at the same level of comfort.
When you turn the knob to a higher number (the right side) the indoor air will become
cooler. The temperature is selected by turning the Thermostat/temperature knob to the
desired position.
The 5 or 6 position (the middle position of arc) is a normal setting for average
conditions.
Your Panel may look like any
of below mentioned panels.
3
Mode
Timer
Fan
Cool
Dry
22
On
FAN
SPEED
V
Fan Speed
1
DOWN
AUTO
SWING
1
ON/OFF
Temp
4
Cool
Type 2
1
9
2
FAN
SPEED
SLEEP
TIMER
4
4
TIMER
7
6
MODE
3
SWING
10
TIMER
2
3
ENERGY SAVER AUTO SWING
2( b)
V
V
MODE
TEMP
FAN SPEED
22
Timer
5
UP
5
6
5
Fan
POWER
7
Energy Saver
V
Type 1
2
REMOTE CONTROLLER
6
1
Temp
Power
5
Power
7
1
88
FAN
Mode
2
5
5
1
5
4
ON
Timer
FAN
SPEED
3
AUTO
SWING
4
6
ON/OFF
Timer
Mode
Energy
Saver
Auto
Swing
V
3
1
2
Type 4
8
6
V
Fan Speed
9
Sleep
Temp
Timer
88
FAN
Auto
Swing
POWER
1
TEMP
1
5
FAN SPEED
Type 5
4
7
4
Fan
Speed
On/Off
Energy
Saver
Fan Cool
Dry
Timer
Mode
3
2
MODE
2
AUTO SWING
6
Temp
Power
1
5
2
5
1
Type 6
MODE
2
TEMP
9
6
FAN
SPEED
SLEEP
TIMER
SWING
TIMER
4
10
3
4
5
6
1
-9-
4
2
9
6
3
Mode
5
ON/OFF
1
5
4
3
TEMP
Power
8
Fan Speed
7
COOL
Air
Purifier
Power
Fan Speed
V
ENERGY SAVER
TEMP
Temp
DRY
Type 3
Temp
V
COOL
2
Sleep
Mode
Timer
Auto
Swing
6
Controls
Precaution: The Remote Control unit will not function properly if strong light strikes the sensor
window of the air conditioner or if there are obstacles between the Remote Control
unit and the air conditioner.
1 POWER BUTTON
Operation starts, when this button is pressed and stops when you press the button again.
2 OPERATION MODE SELECTION BUTTON
Select (a)Cool (b)Energy Saver (c)Fan & (d)Dehumidification (dry) with this button. Energy
saver mode-fan stops when compressor stops cooling. Approximately after 3 minutes fan will
turn on to determine if cooling is needed. In Dehumidification (dry) mode, unit will run at low
fan speed only with compressor ‘ON’.
3 ON/OFF TIMER*
Set the time of ON/OFF operation. The timer can be set by the one hour for a maximum of
12 hours. In the first 30 minutes set temperature increases by 1°C and in the next 30 minutes
temperature increases by another 1°C, this temperature then remains till the timer function is
deactivated.
4 FAN SPEED SELECTOR
Select the fan speed in Three steps Low (F1) / Med. (F2) / High (F3)**
5 ROOM TEMPERATURE SETTING BUTTON
Control the room temperature within a range of 16°C to 30°C.
6 AUTO SWING*
The vertical louver swings horizontally by the automatic system and stops when you press the
button again.
7 SIGNAL RECEIVER
8 AIR PURIFIER (For Plasma Model) (Optional)
Used to start or stop plasma purification system.
9 SLEEP BUTTON*
Sleep function can be set by one hour for a maximum of 7 hours. In the first 30 minutes set
temperature increases by 1°C and in the next 30 minutes temperature increases by another
1°C, this temperature then remains till the timer function is deactivated. This is how the
sleep function behaves. The fan speed will change to low speed(F1).
10 OPTIONAL KEY
This button is non-functional key.
*Operation modes may vary in selected models.
**Fan speed in two steps Low (F1) / High (F2) in select models.
10 Mosquito Away* Operation (Optional)
Used to start or stop Mosquito Away operation
Mosquito Away is a device to radiate frequency which mosquitoes don’t like.
1 Press
- To start Mosquito Away function.
•
•
•
•
•
*
2 Press
again to finish
During this operation mosquito away LED (available on unit display panel) will ON.
You can use this function by pressing
without turning the air conditioner ON. (In this case, Fan will be off).
This function can be used with other function like timer.
This function may not be supported depending on the model.
The Mosquito Away performance can be different depending on the customer’s environment.
For detail refer Disclaimer.
AUTO RESTART
In failure of electric power the unit runs as previous setting operation when power returns.
'SLEEP' and ' TIMER ' function cannot operate at same time.
-10-
How to Insert the Batteries
1 Remove the cover from the back of the remote
controller.
Slide the cover according to the arrow direction.
2 Insert the two batteries.
Be sure that the (+) and (-) directions are correct.
Be sure that both batteries are new.
3 Re-attach the cover.
Slide it back into the position.
Do not use rechargeable
batteries, such batteries differ
from standard dry cells in shape,
dimensions, and performance.
Remove the batteries from the
remote controller if the air
conditioner is not going to be
used for an extended length of
time.
REMOTE CONTROLLER
Type 7
Type 8
(e)
Saver
Turbo
Silent
High
Fan
Low
Fan
HIGH COOL
Comfort
Cool
Auto
Swing
Super
Cool
Mode
Temp
2
3
1
4
POWER
1
27°C
LOW COOL
24°C
HIGH FAN
21°C
LOW FAN
18°C
TEMP
3
Auto
Swing
Mode
Temp
ON/OFF
2
3
1
FAN SPEED
4
5
MODE
2
AUTO SWING
4
Controls
Precaution:The Remote Control unit will not function properly if strong light strikes the sensor
window of the air conditioner or if there are obstacles between the Remote Control
unit and the air conditioner.
1
POWER BUTTON
Operation starts, when this button is pressed and stops when you press the button again.
2
MODE
Select (a) Turbo (b) Silent (c) High Fan & (d) Low Fan with this button.
(a) Turbo / High Cool : Switches on compressor and air cooling operation at high fan speed.
(b) Silent / Low Cool : Switches on compressor and air cooling operation at low fan speed.
(c) High Fan : Circulates filtered air at high speed.
(d) Low Fan : Circulates filtered air at low speed.
It is recommended to select 'Silent / Low Cool' for Normal Cooling Operation and select
'Turbo / High Cool' for maximum cooling requirement.
3
TEMP
Controls Room temp. from 18°C to 27°C with step of 3°C.
a) Super Cool / 18°C : 18°C Temperature Setting.
b) Cool / 21°C : 21°C Temperature Setting.
c) Comfort / 24°C : 24°C Temperature Setting.
d) (e) Saver / 27°C : 27°C Temperature Setting.
4
AUTO SWING* (Optional)
The vertical louver swings horizontally by the automatic system and stops when
you press the button again.
5
FAN SPEED
Select fan speed in two steps - High/Low.
-11-
Additional controls and important information.
Vent Control
The vent control is located above the
control knobs.
When set at CLOSE, only the air inside
the room will be circulated and
conditioned. When set at OPEN, some
inside air is exhausted outside.
CLOSE
VENT
OPEN
To open the vent, pull the lever toward you.
To close it, push it in.
Air Direction
The direction of air can be controlled
horizontally or vertically by using the
horizontal louver or vertical louver.
Horizontal Air-Direction
The horizontal air direction is adjusted
by setting the AUTO SWING switch to
the ON position.
Vertical Air-Direction
Fingertip pressure on the bank of horizontal
louvers adjusts the air direction up or down
Parts Information
Learning parts name prior to installation will help you understanding the installation procedure.
1
1. CABINET
2. FRONT GRILLE
3. AIR FILTER
4. AIR INTAKE(INLET GRILLE)
5. AIR DISCHARGE
2
3
4
5
6
15
6. VERTICAL AIR DEFLECTOR
(HORIZONTAL LOUVER)
7. EVAPORATOR
8. HORIZONTAL AIR
DEFLECTOR
(VERTICAL LOUVER)
-12-
9
10
11 12 13 14
7
8
9.
10.
11.
12.
13.
14.
15.
CONTROL BOARD
POWER CORD
COMPRESSOR
BASE PAN
BRACE
CONDENSER
PLASMA FILTER ASSY.
Care and Maintenance
Grille and Case
To clean, use water and a mild detergent. Do not
use bleach or abrasives.
Turn the air conditioner off and remove the plug
from the wall outlet before cleaning.
Air Filter
Ensure the power is off before open the front Grill.
The air filter behind the front grille should be checked and cleaned
at least once every 2 weeks or more often if necessary.
The grille is designed to clean the filter downward.
To remove:
1 Open the inlet grille upward by pulling out the bottom of the
inlet grille. (Refer Fig. 1)
(Fig. 1)
(Fig. 2)
2 Using the tab, pull up slightly on the filter to release it and pull
it down (Fig. 1). Slide out five filter from grill (fig. 2).
3 Clean the filter with warm, soapy water below 40°C (104°F).
4 Rinse and gently shake the water from the filter and let it dry
before replacing it.
CAUTION: DO NOT operate the air conditioner without a filter
because dirt and lint will clog it and reduce
performance.
Drainage
1 In humid weather, excess water may cause the BASE PAN to overflow.
To drain the water, remove the DRAIN CAP
2 To remove the condensed water, you can install the drain pan as below.
1. Take the drain pan which is located in the air discharge.
2. Install the drain pan to the right corner of the cabinet with 4 screws.
3. Connect the drain hose to the outlet located at the bottom of the drain
pan. You can purchase the drain hose or tubing locally to satisfy your
particular needs. (Drain hose is not supplied).
BASE
PAN
BASE
PAN
DRAIN
CAP
DRAIN CAP
CABINET
DRAIN
PAN
SCREW
DRAIN HOSE
Important
Long-off period maintenance
(Optional)
1)If the air conditioner is not going to be used for a long period, run the Air-conditioner with the
setting in FAN Mode only and the fan speed on "HIGH" for about half an hour, to dry the whole
Air-conditioner.
2)After a long off period when you are going to use the air conditioner again, repeat above point
no. 1.
There will possibly be foul smell when the machine is started after a long time (1 week). This is due
to various odours emitted by smoke, foodstuff, cosmetics and others, which sticks to the Air Filter
and Evaporator coil. Hence, clean the Air Filter and the Evaporator before you start the machine
after long time to avoid foul smell.
-13-
Installation Instructions
Select the Best Location
A
To prevent vibration and noise, make sure the unit is installed securely and firmly.
B
C
Install the unit where the sunlight does not shine directly on the unit.
D
There should be no obstacle, such as a fence or wall, within 1000mm from the back of the cabinet because it will prevent
heat radiation of the condenser.
Restriction of outside air will greatly reduce the cooling efficiency of the air conditioner.
Install the unit a little obliquely outward not to leak the condensed water into the room (about 10 ~ 15mm or 1/4
bubble with level).
CAUTION: All side louvers of the cabinet must remain exposed to the outside of the structure.
Top View
Side View
Wall
Ceiling
Over 100 mm
Over 110 mm
Over 1000 mm
Outdoor
Indoor
Over
200 mm
10mm
AC Top
Room AC
Over
200 mm
Position A
Over 1200 mm
Wall
Wall
Wall
Indoor
Floor
Front View
Side View
Unit Width 'A'
Window Width "A"
Wooden frame 45~50mm
15mm
Unit
Height
'B'
About 45mm
Window
Height
"B"
Room AC
Horizontal
Line
-5 ~ +5mm
8~10mm
25mm
About 400~500mm
Wall
CATEGORY
9000 Btu/h
12000 Btu/h
18000 Btu/h
22000 Btu/h
A
470
600
660
660
B
355
380
428
428
Remove the Air Conditioner From the Case
A
Remove the 2 shipping screws from the
back of the case.
B
Remove the 2 screws on each side of the
case. Keep these for later use.
C
Shipping screws
-14-
Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing the case.
Installation Instructions
Install the Air Conditioner in the Case
A
E
Slide the air conditioner into the case.
Reinstall the screws removed earlier on
each side of the case.
Attach the front grille to the case by
inserting the tabs on the grille into the slots
on the front of the case. Push the grille in
until it snaps into place.
Deo-filter*
Screw
Power Cord
Screw
CAUTION: The power cord must be connected to
an independent circuit.
The green/green-yellow wire must be
grounded.
B
Stuff the foam between the unit and the
wall to prevent air and insects from getting
into the room.
When you detach the
front grille from the
case, push the grille
to your rightside and
pull it toward you.
The Foam
C
F
Fix Holder lock with base pan & cabinet
with screw to prevent machine from
sliding out of cabinet from back grill side
(Anti theft locking)
If installer / user will try to open the inlet
grille beyond 90 degree, it will automatically
disassemble and can be easily fitted back.
1: For opening front Inlet
D
2: For closing front Inlet
Inlet to be snap fit into grille assembly as shown in figure 2
* Deo-filter available in selected Models.
Remove Deodorizing filter carefully from the grille, shake
clean it by hand & keep it in sunlight for one hour to
activate it again; once it is choked.
Before installing the front grille, pull out the
vent control lever located above the unit
control knobs, as shown.
** Grille lifting features available in
selected models
G
-15-
To fix the grille with cabinet, screw it
from both sides
Before you call for service...
Normal Operation
You may hear the thermostat click when the compressor cycles on and off.
Water will collect in the base pan during high humidity or on rainy days. The water may overflow
and drip from the outdoor side of the unit.
The fan may run even when the compressor does not.
Hissing Noise- Sound of liquid refrigerant passing through the system.
Abnormal Operation
Problem
Possible Causes
What To Do
The air conditioner is
unplugged.
Make sure the air conditioner plug is pushed
completely into the outlet.
The fuse is blown/circuit
breaker is tripped.
Check the house fuse/circuit breaker box and
replace the fuse or reset the breaker.
Power failure.
If power failure occurs, turn the OPERATION control
to OFF( O ) . When power is restored, wait 3 minutes
to restart the air conditioner to prevent tripping of the
compressor overload.
Airflow is restricted.
Make sure there are no curtains, blinds, or furniture
blocking the front of the air conditioner.
THERMOSTAT control set
too warm.
Turn the THERMOSTAT knob clockwise to a cooler
setting.
The air filter is dirty.
Clean the filter at least after every 2 weeks.
See the operating instructions section.
The room may have been
hot.
When the air conditioner is first turned on you need
to allow time for the room to cool down.
Cold air is escaping.
Check for open furnace, floor registers and cold air
returns.
Set the air conditioner's vent to the closed position.
Cooling coils have iced up.
See Air Conditioner Freezing Up below.
Air conditioner
freezing up
Ice blocks the air flow and
stops the air conditioner
from cooling the room.
Set the OPERATION control at fan or HIGH cool with the
THERMOSTAT at the warmer position or the temperature
at more than 23°C.
AC Operation
is Noisy
Glass pane vibrating.
Glass are to be penned
May be sound of
condensate water.
It is normal (Generally high only)
(To avoid the noise, remove drain side knob & insert drain
pipe for proper drainage)
Installation levelling
not proper.
Get it levelled properly.
Compressor not starting
due to 3 minute delay
internally.
This is normal.
If you restart the air conditioner within 3 minutes after turning it
off a protective device will work to shut it off for 3 minutes.
Air conditioner
does not start
Air conditioner
does not cool as it
should
Unit does not
Cool upon
restart
-16-
10 Easy Steps to find out your AC tonnage
Dear Customer,
Please follow Below mentioned 10 easy steps to find out the AC tonnage required for your room.
Step
1
Parameter
Room Volume (Cubic feet)
upto 1000
1001 ~ 2000
2001 ~ 3000
3001 ~ 4000
Score
Step
2
3
4
5
6
Window Area exposed to sun
(in sq. ft.) - (West facing)
2
upto 10
11 ~ 20
21 ~ 30
1
2
3
7
0
1
2
3
8
Window Area exposed to sun
(in sq. ft.) - (other directions)
3
4
5
upto 10
11 ~ 20
21 ~ 35
36 ~ 50
Wall Area exposed to sun
(in sq. ft.) - (West facing)
100
150
200
300
Wall Area exposed to sun
(in sq. ft.) - (other directions)
100
150
300
500
Score
1~5
6~10
11~17
18~25
1
2
3
4
9
0
1
2
3
10
Parameter
Walls area - not exposed to
sun (in sq. ft.)
100
300
600
1000
No. of persons occupying
room
2
4
6
8
Ceiling area exposed to sun
(in sq. ft.)
200
300
400
Ceiling area if not exposed to
sun (in sq. ft.)
200
300
400
Total Appliance Load (tube
light-40w / Computer75w, CTV - 75 etc.)
100W
250W
500W
Score
0
1
2
3
1
2
3
4
1
2
3
0
1
2
2
3
4
AC recommended
0.75Tr
1.0Tr
1.5Tr
2.0Tr
Score Table
Example : For Room size 15 feet(L) x 12 feet(B) x 10 feet(H) with one window 4 feet x 3 feet exposed to
sun (west) & one wall exposed to sun (east).The room is on First floor with ceiling not exposed to sun.
The no. of persons occupying the room is 4 nos. The appliance load is 2 tube lights, 1 Computer & 1 TV.
Calculate the AC tonnage required.
As per steps given above : room volume : 15*12*10 = 1800 cu. Ft. , window area = 4*3=12 sq.ft.,
Wall area (east) = 15*10=150
Step1 = 3
Step2 = 2
Step3 = 0
Step4 = 0
Step5 = 1
Step6 = 2
Step7 = 2
Step8 = 0
Step9 = 1
Step10= 3
Total score = 14
-17-
1.5T Window AC
(From Score table)
DISCLAIMER
IMPORTANT: Long term effect not tested and mosquitoes may become resistant. Mosquito species used in the
test below may differ from the mosquito species of your region. This product is one of the ways to manage
mosquitoes and not intended to replace other protective devices against mosquitoes.
Test Details:
A:
Tested by International Institute of Biotechnology and Toxicology (IIBAT), India, According to LG internal
testing method.
Test conducted, three times at temperature of 27±2°C and humidity of 60±10%
Test used two chambers size 3.5m x 2.6m x 2.2m, the chamber with the LG air conditioner assumed to be
inside (“inside chamber”) and the chamber without the LG conditioner assumed to be outside
(“outside chamber”).
Cages (25cm3) are placed inside each chamber, connected using netted sleeves to enable the movement
of the mosquitoes from one cage to another.
One person is placed inside the chamber to attract mosquitoes
For each test, 50 lab cultured 3-5 days old mosquitoes were placed in the cage in outside chamber; number
of mosquitoes coming into the cage in inside chamber was counted every 10 minutes for 90 minutes under
2 settings:
Control setting (low fan ON + mosquito repelling ultrasonic OFF)
Treatment setting (low fan ON + mosquito repelling ultrasonic ON)
Test Result:
Found to repel on average 81.1% of Aedes aegypti mosquitoes. Repel rate shows percentage of mosquitoes
prevented from entering the inside chamber after 90 minutes of Treatment setting compared to Control setting.
Represented average of 81.1% derived from 76.9%, 84.6%, 81.8%.
B:
Tested by Intertek, Korea,
According to LG internal testing method.
Test conducted, three times at temperature of 27±2°C and humidity of 60±10%
Test used two chambers size 33m3 and 19m3 connected by a channel made of white sheet, small
chamber assumed to be outside (“outside chamber”) and the large chamber to be inside with the
LG air conditioner (“inside chamber”)
One person is placed inside the inside chamber to attract mosquitoes
For each test, 50 lab cultured 3-5 days old mosquitoes were released into outside chamber; number of
mosquitoes coming into the inside chamber was counted every 10 minutes for 90 minutes under 2 settings:
Control setting (low fan ON + mosquito repelling ultrasonic OFF)
Treatment setting (low fan ON + mosquito repelling ultrasonic ON)
Test Result:
Found to repel on average 72.5% of Aedes aegypti mosquitoes. Repel rate shows percentage of mosquitoes
prevented from entering the inside chamber after 90 minutes of Treatment setting compared to Control setting.
Represented average of 72.5% derived from 73.1%, 64.3%, 80.0%.
Results may vary in other settings, including but not limited to temperature, humidity, location, space, mosquito
species, number of mosquitoes, number of persons, and operation time.
NOTES :
MFL37725109
Regd. Office: LG Electronics India Pvt. Ltd., A Wing (3rd Floor), D-3, District Center, Saket, New Delhi - 110017
Download PDF

advertising