LG | HSNC096QDA3 | LG HSNC096QDA3 Owner’s Manual

website http://www.lgservice.com
LG
LG
Room Air Conditioner
INSTALLATION MANUAL
IMPORTANT
• Please read this instruction manual completely before
installing the product.
• When the power cord is damaged, replacement should be
performed by authorized personnel only.
• Installation work must be performed in accordance with
the national wiring standards by authorized personnel
only.
• Please retain this installation manual for future reference
after reading it thoroughly.
5
7
8
11
12
14
15
17
2 Installation Manual
Installation Manual 3
4 Installation Manual
5
Installation Manual 5
6 Installation Manual
Installation Manual 7
8 Installation Manual
Installation Manual 9
10 Installation Manual
Installation Manual 11
12 Installation Manual
Installation Manual 13
14 Installation Manual
Installation Manual 15
16 Installation manual
website http://www.lgservice.com
LG
Room Air Conditioner
OWNER'S MANUAL
Prior to installation, this airconditioning unit must be
submitted for approval by the
utility service which provides
electricity (EN 61000-2,
EN 61000-3 Norm).
IMPORTANT
• Please read this owner's manual carefully and thoroughly
before installing and operating your room air conditioner.
• Please retain this owner's manual for future reference after
reading it thoroughly.
ENGLISH
LG
�
2 Owner ‘ s Manual
�
Owner ‘s Manual 3
4 Owner ‘ s Manual
About the remote control on the system
Features of the Remote Control
Signal transmitter
TEMP.
OFF
TIME hr.
OPERATION DISPLAY
Displays the operation conditions.
1
Transmits the signals to the room air
conditioner.
2
1
3
OPERATION MODE SELECTION
BUTTON
Used to select the operation mode.
4
OFF TIMER BUTTON
Used to set the time of stopping operation.
5
START/STOP BUTTON
Operation starts when this button is
pressed, and stops when the button is
pressed again.
6
ROOM TEMPERATURE SETTING
BUTTONS
7
INDOOR FAN SPEED SELECTION
BUTTON
8
JET COOL OPERATION BUTTON
Used to start or stop the speed (speed cooling
operates super high fan speed in cooling mode.)
4
8
2
3
8
5
7
6
AIRFLOW DIRECTION START/STOP
BUTTON
Used to stop or start louver movement and
set the desired up/down airflow direction.
(1) OPERATION MODE
Cooling Mode
Cooling Mode
Healthy Dehumidification Operation
Healthy Dehumidification Operation
(Cooling Model)
Heating Operation
(2) OPERATION PROCEDURE
1st
( Heat pump Model )
Start/Stop Button
TEMP.
Operation Mode Selection
nd Button
2
3 rd
4th
Room Temperature
Setting Button
Indoor Fan Speed
Selection Button
2
4
1
3
Owner ‘s Manual 5
Be
ep
Be
ep
TEMP.
TEMP.
OFF
TIME
hr.
Cooling
TEMP.
OFF
TIME
OFF
hr.
TIME
hr.
Heating
Healthy
Dehumidification ( Heat pump model only)
TEMP.
OFF
TIME
hr.
four
TEMP.
OFF
6 Owner ‘ s Manual
TIME
hr.
- Low , Medium
High and chaos.
The display shows
high fan speed
Heating
( Heat pump only )
TEMP.
TEMP.
OFF
TIME
hr.
Cooling
TEMP.
OFF
TIME
OFF
hr.
TIME
hr.
Heating
Healthy
Dehumidification ( Heat pump model only)
6
TEMP.
OFF
TIME
hr.
four
TEMP.
OFF
TIME
hr.
- Low , Medium
High and chaos.
The display shows
high fan speed
Owner ‘ s Manual 7
Airflow Direction Control
The airflow direction can be adjusted as desired by
using the remote controller. This is effective when you
want to cool yourself directly, such as after taking a
bath.
1
Press the Start/Stop Button.
(Confirm the unit on operation.)
2
Press the Airflow Direction Control
Button and the vertical louvers swing up
and down automatically.
3
Press again the Airflow Direction
Control Button to set the vertical louver
at the desired airflow direction.
Horizontal Airflow Direction Control
• Adjust the horizontal airflow direction by manually
moving the horizontal airflow direction louver by
hand.
Caution
• Always use the remote controller to adjust
the airflow direction. Manually moving the
vertical airflow direction louver by hand could
cause operation errors.
• When air conditioner operation is stopped,
the vertical airflow direction louver will close
the air outlet vent of room air conditioner.
10 Owner ’ s Manual
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan, regardless of room
temperature and resets in 18 minutes.
During test operation, if remote controller signal is received, the unit operates as remote controller sets.
If you want to use this operation, Press and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1
"beep".
If you want to stop the operation, re-press the button.
Owner ‘ s Manual 11
�
12 Owner ‘s Manual
The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
If clogged with dirt or soot, the heat exchanger and panel vents may be professionally steam
cleaned.
NOTE:
Dirty or clogged coils will reduce the
operating efficiency of the system and cause higher operating costs.
Owner ‘s Manual 13
14 Owner ‘ s Manual
P/No.:MFL41549803
Download PDF

advertising