LG | JSUQ24PUXA | LG JS-Q18BUXD Owner’s Manual

ROOM AIR
CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED
MFL39754874
Rev.05_081216
www.lg.com
2
14 ADVANCED FUNCTIONS
3
3
IMPORTANT SAFETY
INSTRUCTION
8
BEFORE
Prior to operation..............................................8
Components......................................................8
Electrical Safety.................................................9
Using the remote control ..............................9
Inserting Batteries .......................................9
Wireless Remote Control ..........................10
11 BASIC FUNCTIONS
Cooling your room ..............................................11
Heating your room ..............................................11
Removing humidity..............................................11
Airing your room...................................................12
Adjusting the fan speed.....................................12
Using air flow direction function.......................12
Setting the timer .................................................12
Setting the current time.................................12
Turning ON the air conditioner
automatically at a set time.............................13
Turning OFF the air conditioner
automatically at a set time.............................13
Canceling the timer setting ..........................13
- Setting sleep mode .........................................13
Changing room temperature quickly..............14
H COOL(Himalaya) Mode .............................14
Indoor air purification..........................................14
Auto Clean operation......................................14
Energy saving cooling mode.............................14
Auto operation (Cooling-only models)...........15
Display screen brightness..................................15
Auto changeover operation (Cooling &
Heating model).....................................................15
Mosquito away operation (Optional)...............15
Operating the air conditioner without the
remote control......................................................16
Restarting the air conditioner automatically ..16
17 MAINTENANCE
Cleaning the air filter...........................................18
Cleaning the anti-allergy filter (Optional).......18
Cleaning the plasma filter (Optional)..............18
Cleaning the 3M filter (Optional) ....................19
Outdoor Unit ........................................................19
20 TROUBLESHOOTING
Self-diagnosis function...................................20
Before requesting service...............................20
23 DISCLAIMER
CAUTION
• Contact the authorized service technician for repair or
maintenance of this unit.
• Please install your airconditioner by company
authorized service franchisee / authorized service
and sales dealer.
• The air conditioner is not intended for use by young
children or invalids without supervision.
• Young children should be supervised to ensure that
they do not play with the air conditioner.
• When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only,
using only genuine replacement parts.
We recommend usage of voltage stabilizer with
high / low voltage cut off in areas having voltage
fluctuations.
AC TONNAGE
(CAPACITY)
STABILIZER kVA
(3-STEP STABILIZER)
1.0 (12k)
1.5 (17k, 18k)
2.0 (22k, 24k)
3
4
5
3
Avoid excessive cooling.
reduce the cooling / dehumidi cation functions.
(Refer page No. 18 and 19 details of owner's manual).
Appliances shall be installed in accordance with national wiring regulations.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
When the power cord is to be replaced, replacement work shall be performed by authorized
personnel only using only genuine replacement parts.
4
SAFETY INSTRUCTIONS
Do not install the air conditioner on an unstable surface or where there may be a danger of
unit falling. It may result in death, serious injury or product failure.
Be cautious when you unpack or install the air conditioner. Failure to do so may result in
serious injury or product failure.
Operation
Be sure to use only those parts which are listed in the service parts list. Never attempt to modify
the equipment. It may result in death, serious injury, effect on product performance or product failure.
Only use components that are approved by the manufacturer and do not repair or modify them.
Failure to do so may result in electric shock, effect on product performance or product failure.
SAFETY INSTRUCTIONS
5
Only use the refrigerant specified on the air conditioner label. Failure to do so may result in
explosion or fire.
enter
Do not let the air conditioner run for a long time when the humidity is very high or when a door or
window has been left open or in small place without ventilation. Failure to do so may result in product
failure or result in explosion or fire.
ON OFF
When there is a gas leak, ventilate suf ciently before using the air conditioner again. Failure to do
so may result in explosion or re.
There is risk of damage or loss of property.
Do not block the inlet or outlet of air ow. It may effect product performance.
or serious injury.
or health complications.
For inner cleaning, contact an Authorized Service Center or a dealer.
Do not use harsh detergent that causes corrosion or damage on the unit. Harsh detergent may also
cause failure of product fire, or electric shock.
Use non-inflammable gas (nitrogen) to check for leak and to purge air using compressed air or
flammable gas may cause fire or explosion.
Stop operating and close the window in storm or hurricane. If possible remove the product from the
window before hurricane arrives.
Unplug the power plug when the air conditioner is not used for an extended period of time. Failure to
do so may result in product failure.
This appliances is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.
It may effect product performance.
6
SAFETY INSTRUCTIONS
water leakage or product failure.
not cause
neighbours.
to neighbours.
,
Keep level even when installing the product.
Operation
effect product performance.
remote
Do not recharge or dissemble the batteries.It may result in explosion, fire or serious injury.
may effect product performance or
electric shock or serious injury.
SAFETY INSTRUCTIONS
vius iqjkus midj.k dk fuiVku ¼bZ&vif’k"V fu;e ds vuqlkj½
Disposal of your old appliance (as per e-waste Rules)
When this crossed out wheeled bin symbol is depicted
on the product and its operator’s manual, it means the
product is covered by the e-waste Management and
Handling Rules , 2011 and are meant to be recycled,
dismantled, refurbished or disposed off.
2. Dos
a. The product is required to be handed over only to the
authorized recycle for disposal.
b. Keep the product in isolated area, after it becomes non-functional/ unrepairable so as to prevent its accidental breakage.
Don’t
a. The product should not be opened by the user himself/herself, but only by
authorized service personnel.
b. The product is not meant for re-sale to any unauthorized
agencies/scrap dealer/ kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed
area.
3. Any disposal through unauthorized agencies/person will attract action
under Environment (Protection) Act 1986 .
4. Hazards of improper handling or accidental breakage
a. If batteries are disposed incorrectly, it can greatly harm the environment.
The chemical by-products are hazardous. The metals and chemicals
found in batteries can mix into soil which may be hazardous to humans,
plants and animals. If thrown in fire, they can cause blast and release
toxic gases which may be harmful for health.
b. The refrigerant (R410A) used can be combustible at low pressure. The
potential health effects of over exposure is dizziness, headache and
heart irregularities.
5. “This product is complied with the requirement of Hazardous Substances
as specified under Rule 13 (1) & (2) of the E-Waste (Management &
Handling) Rules, 2011”.
6. To locate a nearest collection centre or call for pick-up (limited area only)
for disposal of this appliance, please contact Toll Free No.
1800-315-9999 / 1800-180-9999 for details. All collection centre and
pick up facilities are done by third parties with LG Electronics India Pvt.
Ltd. merely as a facilitator.
For more detailed information, please visit : http://www.lg.com
7
1.
34-
56-
1- tc bl dkVs x;s ifg;s okys fcu dk fpº+u fdlh midj.k vkSj
blds vkWijsVj dh iqfLrdk ds lkFk layXu gksrk gSa rks bldk eryc
gS fd bls ^^bZ&vif'k"V^^ ¼izca/ku vkSj gFkkyu½ fu;e 2011 ds
vUrxZr lfEefyr fd;k x;k gS] vkSj bls uohuhdj.k] fo?kVu vkSj
fuiVku ds fy, cuk;k x;k gSA
2- djsa&
d& midj.k dks flQZ vf/kd`r iqu% uohuhdj.kdrkZ dks gh fuiVkj.k
djus gsrq gLrkarfjr djsaA
[k& tc midj.k dk;Zjr u gks bls vyx {ks= esa j[kas rkfd midj.k ls gksus okyh
nq?kZVukvks ls cpk tk ldsA
uk djsa&
d& bl midj.k dks Lo;a/[kqn ugha [kksyuk pkfg, ! midj.k dks dsoy vf/kd`r
vf/kdkjh ds }kjk gh [kksyk tkuk pkfg,A
[k&bl midj.k dks iqu% fcØh ds fy, fdlh Hkh dckM+hokyk@Hkaxkj
okyk@vukf/kd`r laLFkk dks u nsaA
x& bl midj.k dks fdlh ?kjsyw vif'k"V lkeku ds lkFk feykdj u j[ksaA
?k& midj.k ds cnys gq, ;k vkrafjd iqjtks dks [kqys {ks= esa u j[ksaA
;fn fdlh vukf/kd`r foHkkx ;k O;fDr ds }kjk fuiVkj.k fd;k tkrk gS rks ;g
i;kZoj.k ¼lqj{kk½ /kkjk 1986 ds vUrxZr vkrk gSA
nq?kZVukxzLr VwV@QwV rFkk vO;ofLFkr j[k&j[kko ls cps A
d& ;fn cSVfj;ksa dk fuiVkj.k v'kq) :i ls dj jgs gaS] rks ;g okrkoj.k dks cgqr
uqdlku igqqWpk ldrk gSaA jklk;fud midj.k [krjukd gksrs gaSA tks jlk;u vkSj /kkrq
cSVfj;ksa esa ik, tkrs gaS] bls feV~Vh esa feykus ij ;g euq";ksa] ikS/kksa vkSj i'kqvksa ds fy,
[krjukd gks ldrh gaSA ;fn bls vkx esa Qsadrs gaS rks ;s foLQksV dj ldrh gaS vkSj ;s
tgjhyh xSlsa ns ldrk gS tks LokLF; ds fy, gkfudkjd gaSA
[k& jsÝhtjsaV ¼R410A½ de ncko ij ngu'khy gks ldrh gaS rFkk blls LokLF; ij
nqLizHkko iM+ ldrk gS tSls pDdj vkuk] flj nnZ vkSj g`n; xfr :dukA
;g mRikn bZ&vif'k"V ¼izca/ku vkSj gFkkyu½ fu;e 2011 ds vUrxZr 13¼1½ ,oa ¼2½ ds
rgr fufnZ"V [krjukd inkFkksZa dh vko';drk dk ikyu djrk gSA
mijksDr inkFkksZ ds fuiVkju ds fy, utnhdh fuiVkju laLFkku ¼ladh.kZ {ks=½ esa dkWy
djsaA vf/kd tkudkjh ds fy, gekjs Vksy Ýh uEcj 1800-315-9999 / 1800-180-9999
ij dkWy djsaA lHkh laxzg.k dsUnz o fid&vi dh lqfo/kk,a FkMZ&ikVhZ ls tks
LG Electronics India Pvt. Ltd dks viuh lsok,a iznku dj jgh gksa] ls djok,aA
vf/kd tkudkjh ds fy, ns[ksa osclkbV % http://www.lg.com
8
BEFORE USE
Prior to Operation
Preparing for Operation
1. Contact an installation specialist for
installation.
2. Plug in the power plug properly.
3. Use a dedicated circuit breaker.
4. Do not use an extension cord.
5. Do not start/stop operation by plugging/
unplugging the power cord.
6. If the cord/plug is damaged, replace it with
only an authorized replacement part.
Usage
1. Being exposed to direct airflow for a long
time may be hazardous to your health. Do
not expose occupants, pets, or plants to
direct airflow for a long time.
2. Due to the possibility of oxygen deficiency,
ventilate the room when using the
appliance together with stoves or other
heating devices.
3. Do not use this air conditioner for nonspecified special purpose (e.g. preserving
precision devices, food, pets, plants, or art
objects). Such use may damage your
properties.
Cleaning and Maintenance
1. Do not touch the metal parts of the unit
when removing the filter. Injury can occur.
2. Do not use water to clean inside the air
conditioner. Exposure to water can
destroy the insulation, leading to electric
shock or effect product performance.
3. When cleaning the unit, first make sure
that the power and breaker are turned off.
The fan rotates at a very high speed during
operation. There is a possibility of injury if
the unit’s power is triggered while cleaning
inner parts of the unit.
Service
For repair and maintenance, contact your
authorized service dealer.
Components
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
This symbol alerts you to hazards that may cause harm to the
air conditioner.
This symbol indicates special notes.
Features
WARNING
This appliance should be installed in accordance with national wiring regulations. This guide acts as a
guide to help to explain product features.
Indoor unit
Air Inlet
Air Filter
Outdoor unit
Panel
(Side)
(Rear)
Air Inlet
Connecting
Wires
Piping
Air Outlet
Air deflector
Base Plate
Drain Hose
BEFORE USE
9
Electrical Safety
WARNING
• This appliance must be properly grounded.
To minimize the risk of electric shock, you must always plug into a grounded outlet.
• Do not cut or remove the grounding.
• Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the
appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded
through the house wiring.
• If you have any doubt whether the air conditioner is properly grounded, check the wall receptacle
and circuit checked by a qualified electrician.
Using the remote control
If the display screen of the remote control begins
to fade, replace the batteries. Insert AAA (1.5 V)
batteries before using the remote control.
This feature can be changed according to
type of model.
Insert the new batteries and make sure the
+ and - terminals of the batteries are installed
correctly.
10 BEFORE USE
Using the remote control
You can operate the air conditioner more conveniently with the remote control.
Wireless remote control
Signal Transmitter
Air Circulation button Used to circulate the room air without cooling or
heating.
Mosquito Away operation button Used to
start or stop Mosquito Away operation
Sets the
sleep mode auto operation.
To adjust the desired room temperature
in cooling, heating or auto changeover
mode.
Display
Screen
FAN
ENERGY
SAVING
M’SOON
Control
Panel
ON/OFF button : Turns the air conditioner ON/OFF
-
fan speed.
H’COOL
LIGHT
M’SOON
Signal Transmitter
Use to remove excess moisture.
H’COOL button : Cools down the
indoor temperature within a short
period of time
H’COOL
air flow direction vertically & horizontally.
Temperature Display Button:
Display
Screen
AM
ON
OFF
ENERGY
SAVING
M’SOON
Control
Panel
H’COOL
LIGHT
To turn on/off the air
conditioner automatically at desired time.
A/CLEAN
ENERGY
SAVING
LIGHT
Turn indoor unit
display ON or OFF.
Sets or cancels functions. Also set the current time if held
for 3 seconds.
remote
controller settings.
BASIC FUNCTIONS
BASIC FUNCTIONS
Cooling your room
(Cooling operation)
1 Press
to turn on the power.
2 Press
repeatedly to select the cooling
operation.
- is displayed on the display screen.
Removing humidity (Cooling Mode Only)
(Monsoon operation)
This mode removes excess moisture from
environment with high humidity or in the rainy
season, in order to prevent mold from setting
in. This mode adjusts the room temperature
and the fan speed automatically to maintain
the optimal level of humidity.
1 Press
2 Press
3 Press
or
11
to turn on the power.
M’SOON
to select the monsoon operation.
-
is displayed on the display screen.
!
NOTE
to set the desired
temperature.
- The temperature range is 18 °C 30 °C
Heating your room
(Heating operation)
1 Press
to turn on the power.
2 Press
repeatedly to select the heating
operation.
is displayed on the display screen.
-
3 Press
or
to set the desired temperature.
- The temperature range is 16 °C 30 °C
!
NOTE
Cooling-only models do not support this
function.
• In this mode you cannot adjust the room
temperature, as it is adjusted automatically. Also, the room temperature is not
displayed on the display screen.
• In this mode indoor unit fan and outdoor
unit will be OFF intermittently.
• To Exit from Monsoon mode press
key or H’COOL key or
key
12 BASIC FUNCTIONS
Airing your room
(Air Circulation operation)
Using the Air Flow Direction
Function
This mode only circulates the indoor air
without changing the room temperature.
This function adjusts the direction of the air
flow vertically (horizontally).
to turn on the power.
1 Press
2 Fan button : Press FAN turn on the air
circulation operation.
repeatedly to turn
: Press
on the air circulation operation.
is displayed on the display screen.
-
Press
button repeatedly and select
desired direction
- Select
to adjust the direction of the
air flow automatically.
!
NOTE
Adjusting the air flow direction horizontally
may not be supported, depending on the
model.
Adjusting the air deflector arbitrarily may
cause product failure.
3 Press
!
to adjust the fan speed.
NOTE
• This function may not be supported, depending on the model.
Adjusting the fan speed
1 Press
repeatedly to adjust the fan
speed.
- Select
if you want natural air.
The fan speed adjusts automatically.
Remark
If you restart the air conditioner, it starts to
operate with the previously set direction of
air flow, so the air deflector may not match
the icon displayed on the remote control.
When this occurs, press
or
to
adjust the direction of the air flow again.
This function may operate differently from
the remote control display.
Setting the timer
You can use the timer function to save energy
and to use the air conditioner more efficiently.
Speed
High
Setting the current time
1 Press
Medium
Low
Natural Wind
Natural wind (CHAOS Logic)
For fresher feeling, press the INDOOR FAN
SPEED SELECTION BUTTON and set to
Natural wind mode ( ).
In this mode, the wind blows like a natural
breeze by automatically changing fan speed.
and hold it for longer than 3 seconds.
- The AM/PM icon flickers at the bottom of
the display screen.
BASIC FUNCTIONS 13
2 Press
3 Press
or
to select desired time.
.
to finish.
Turning ON the air conditioner automatically at a set time
1 Press
- The icon below flickers at the bottom of
the display screen.
Canceling the timer setting
1 Press
or
to select the timer setting
to cancel.
2 Press
- To cancel all timer settings, press
(The timer lamp on the air conditioner and
the display will go off.)
Setting sleep mode
Use the sleep mode to turn OFF the air conditioner automatically when you go to sleep.
1 Press
2 Press
or
time.
times.
to select desired
3 Press
to finish.
4 When setting the timer, current time and
ON icon are displayed on the display
screen indicating that the ON TIMER is
set.
to turn on the power.
2 Press
3 Press
or
to select the hour
(up to 7 hours).
to finish.
4 Press
-
is displayed on the display screen in
sleep mode.
Turning OFF the air conditioner automatically at a set time
1 Press
- The icon below flickers at the bottom of
the display screen.
2 Press
or
3 Press
to finish.
times.
to select the
desired
time.
4 When setting the timer, current time and
OFF icon are displayed on the display
screen indicating that the OFF TIMER is
set.
The sleep mode will operate indoor fan at
super low speed in cooling mode and at low
speed in heating mode for pleasant sleep
In cooling mode or Monsoon mode:
The setting temperature will rise automatically
two times by 1 °C over next consecutive 30
minutes (Maximum 2 °C) for a comfortable
sleep.
This will be the final setting temperature as
long as sleep mode is functioning.
After completion of set time unit will switch
OFF automatically.
14 ADVANCED FUNCTIONS
ADVANCED FUNCTIONS
The air conditioner offers some additional advanced functions.
Changing room temperature
quickly
H COOL(Himalaya)Mode
This mode allows you to cool indoor air quickly
Press
- If you turn off the power, the fan operates for 30 minutes and cleans the inside
of the indoor unit.
!
NOTE
Some buttons cannot be used while the
auto cleaning function is in operation.
During Auto Clean function, “
be displayed on the unit.
” will
Energy saving cooling mode
H’COOL
This mode minimizes power consumption during cooling and increases the set temperature
to the optimal level for a more comfortable environment.
The temperature automatically sets at
22 °C if ambient temperature is below 22 °C.
The temperature maintains if ambient temperature is above 22 °C
-In H’COOL(Himalaya)mode, 30 minutes
strong focused air blows out for faster cooling.
Internal Set temperature will be 18 °C.
1 Press
to turn the power on.
2 Press
repeatedly to select the cooling
operation.
3 Press
During & after H'COOL mode swing
function will be ON by default.
To OFF swing function Press respective
swing key.
This mode does not have auto restart
feature.
Indoor air purification
Auto Clean operation
In the cooling and monsoon operations,
moisture is generated inside the indoor unit.
Use the auto cleaning function to remove
such moisture.
1 Press
to turn on the power.
2 Press
A/CLEAN
-
is displayed on the display screen.
During Auto clean selection
Auto clean operation mode
-
!
ENERGY
SAVING
is displayed on the display screen.
NOTE
In Energy Saving Cooling Mode, temperature
on the display of the remote controller and air
conditioner can be different.
This function may not be supported,
depending on the model.
This mode does not have auto restart feature.
ADVANCED FUNCTIONS 15
Auto operation
Auto Changeover operation
(Artificial inelligence)
(Cooling & Heating model)
Cooling-only models
In this mode, the fan speed and the
temperature adjust automatically,
based on the room temperature.
1 Press
to turn on the power.
2 Press
-
AI
repeatedly to select auto operation.
is displayed on the display screen.
3 Press
or
to select the desired oper-
This operation is basically heating or
cooling function of the air conditioner.
But during this operation the controller
change the operation mode automatically
to keep the temperature within ±2 °C
with respect to the setting emperature.
1 Press
to turn on the power.
2 Press
-
AI
ation code if the temperature is higher or
lower than the desired temperature.
AI
!
Code
2
1
0
Description
Cool
Cool slightly
Maintain
room
temperature
-1 Heat slightly
-2 Heat
NOTE
In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
This function may not be supported, depending on the model.
Display screen brightness
repeatedly to select Auto Changeover
operation
is displayed on the display screen.
AI
3 Press
or
to set the desired
temperature.
- The temperature range is 18 °C - 30 °C
4 Press
!
repeatedly to select the fan speed.
NOTE
• This function may not be supported, depending on the model.
Mosquito Away* Operation (Optional)
Mosquito Away is a device to radiate frequency
which mosquitoes don t like.
1 Press
- To start Mosquito Away function.
You can adjust the brightness of the indoor unit
display screen.
1. Press
.
LIGHT
Turn on/off the Display screen.
2 Press
!
again to finish
NOTE
You can use this function by pressing
without
turning the air conditioner ON. (In this case, Fan
speed can not be changed).
At this time horizontal vane will be at default position &
the fan speed will be low.
This function can be used with other function like
timer, monsoon.
This function may not be supported depending on the
model.
The Mosquito Away performance can be different
depending on the customer s environment.
* For detail refer Disclaimer.
16 ADVANCED FUNCTIONS
(Forced Operation)
restart
twice 4 times.
ON/OFF
button
Open the
front panel
upward
ON/OFF
button
Open the
front panel
upward
* The feature can be changed according a type
of model.
Cooling Model
Operating mode
Heat pump Model*
Room Temp. 24 °C
21 °C Room Temp. < 24 °C
Indoor FAN Speed
Cooling
High
Cooling
High
Healthy Dehumidification
High
Setting Temperature
22 °C
22 °C
23 °C
Room Temp. < 21 °C
Heating
If you want to stop the unit, re-press the power button.
!
NOTE
* This feature can be changed according to
type of model.
High
24 °C
- To re-enable the function, press the On/Off
button and hold it for 6 seconds.
The unit will beep twice and the lamp will
blink 4 times.
MAINTENANCE 17
If the air conditioner will not be used for an extended period of time, dry the air conditioner to maintain
it in best condition.
1 Dry the air conditioner in Fan mode for 2 to 3 hours and disconnect the power plug. There may be
internal damage if moisture is left in components.
2 Before using the air conditioner again, dry the inner components of the air conditioner in Fan mode
for 2 to 3 hours. This will help to remove odor which is generated from moisture
*
3M filter*
* The feature can be changed according to type of model.
3 M filter*
1
Regularly
Indoor Unit
Outdoor Unit
Every 4 Months
Clean the Indoor unit surface by using a soft, dry
Cloth.
Clean the condensate drain pipe.
Once a year
Clean the condensate drain pan.
Once a year
Throughly clean the heat exchanger.
Once a year
Replace the remote control batteries.
Regularly
Once a year
Use steam to clean the heat exchanger coils and
the panel vents. (consult with technician)
Clean the fan.
Once a year
Clean the condensate drain pan.
Once a year
Verify that all the fan assembly is firmly tightened.
Once a year
Clean the electric components with air.
Do not washed the 3M filter with water, because the filter can be damaged.
OFF
18 MAINTENANCE
consumption.
* The feature can be changed according to type of model.
Clean the filters with a vacuum cleaner.
(Optional)
Caution :
Remove the plasma filter after 10 seconds.
Do not press
the mesh
(Optional)
MAINTENANCE 19
Cleaning the 3M Filter
(Optional)
3M Filter.
- Do not wash the 3M Filter with water
because the filter can be damaged.
We suggest changing the 3M Filter every
6 months.
The location of the filters may differ,
depending on the model.
For more filters, Please contact the
LG service center.
(Refer to the warranty card.)
The feature can be changed according to
type of model.
Outdoor Unit
The heat exchanger coils and panel vents of the outdoor unit
should be checked regularly. If clogged with dirt or soot, the
heat exchanger and panel vents may be professionally steam
cleaned.
Dirty or clogged coils will reduce the operating efficiency
of the system and cause higher operating costs.
(Rear)
Air Inlet
(Side)
Connecting
Wires
Air outlet
Base Plate
Drain Hose
Piping
20 TROUBLESHOOTING
call
call
call
There is a burning smell and
an abrupt sound coming
from the unit.
call
TROUBLESHOOTING 21
In summer, it may take some time to cool
indoor air. In this case, select the H’COOL
operation to cool indoor air quickly.
The air conditioner stops
during operation.
The auto operation,
H’COOL operation or
is selected.
In some operation modes, such as the H’COOL
or Auto operation modes, you cannot adjust the
fan speed. Select an operation mode in which you
can adjust the fan speed.
The air circulation operation or H’COOL operation is selected.
In some operation modes, such as the air circulation
or H’COOL mode, you cannot adjust the
temperature. Select an operation mode in which you
can adjust the temperature.
The air conditioner is
suddenly turned off.
A power failure has
occurred during
operation.
The Timer Function may have timed out, which
turns the unit off. Check the timer settings.
Wait for the power to come back. If you have
the Auto Restart function enabled, your unit will
resume its last operation several minutes after
power is restored.
The indoor unit is still
The Auto Clean function
is being operated
operating even when
power has been turned off.
Allow the Auto Clean function to continue
since it removes any remaining moisture inside
the indoor unit. If you do not want this feature,
you can turn the unit off
The air outlet on the indoor The cooled air from the
conditioner makes
unit is discharging mist. air
mist.
When the room temperature decreases, this
phenomenon will disappear.
Water leaks from the
outdoor unit.
In the heating operations, This symptom requires installing a drain hose
condensed water drops under the base pan. Contact the installer.
from the heat exchanger.
22 TROUBLESHOOTING
A clicking sound can be
heard when the unit
or stops due to
There is noise or vibration. starts
movement of the
reversing valve.
Creaking sound: The
plastic parts of the in
door unit creak when
they shrink or expand
due to sudden
temperature changes.
Flowing or Blowing
sound: This is the flow
of refrigerant through
the air conditioner.
The indoor unit gives
Odors (such as cigarette
smoke) may be absorbed
off an odor.
into the indoor unit and
discharged with airflow.
The air conditioner
When Heating Mode
starts, the vane is almost
does not emit warm air. closed,
and no air comes
out, even though the
outdoor unit is operating.
The outdoor unit is in
Defrosting Mode.
Outside temperature is
too low.
Contraction or expaTak-tak noise from indoor nsion of plastic components due to chanunit
ge in temperature
These are normal symptoms. The noise will stop.
If the smell does not disappear, you need to
wash the filter. If this does not work, contact
the service center to clean your heat exchanger.
This symptom is normal. Please wait until the
unit has generated enough warm air to blow
through the indoor unit.
In Heating Mode, ice/frost is built up on the coils
when the outside temperature falls. This function
removes a layer of frost on the coil, and it should
finish in approximately 15 minutes.
The heating effect may not be sufficient.
It is a natural phenomenon, and can only
be reduced but not overcome completely
Operation ranges
The table below indicates the temperature ranges the air conditioner can be operated within.
Mode
Indoor temperature
Outdoor temperature
Cooling
18 °C~32 °C
18 °C~48 °C
Heating
16 °C~30 °C
-5 °C~24 °C
* When the outdoor temperature drops below 0°C, heating capacity may drop slightly depending on the
operation condition.
When the air conditioner is not going to be used for a long time.
When air conditioner is not going to be
used for a long time.
When the air conditioner is to be used again.
• This will dry out the internal mechanisms.
Clean the air filter and install it in the indoor
unit.
(Refer to page 18 for cleaning filters.)
Turn off the circuit breaker, and disconnect
the plug.
Check that the air inlet and outlet of the
indoor/outdoor unit are not blocked.
Operate the air conditioner on Air circulation
mode (Refer to page 12) for 2 to 3 hours.
CAUTION
Turn off the circuit breaker when the air conditioner
is not going to be used for a long time.
Dirt may collect and may cause a fire.
Remove the batteries from the remote
control.
DISCLAIMER 23
DISCLAIMER
IMPORTANT: Long term effect not tested and mosquitoes may become resistant. Mosquito species used in
the test below may differ from the mosquito species of your region. This product is one of the ways to manage
mosquitoes and not intended to replace other protective devices against mosquitoes.
Test Details:
A:
Tested by International Institute of Biotechnology and Toxicology (IIBAT), India, According to LG internal
testing method.
Test conducted, three times at temperature of 27 ± 2 °C and humidity of 60 ± 10 %.
Test used two chambers size 3.5 m x 2.6 m x 2.2 m, the chamber with the LG air conditioner assumed to
be inside (“inside chamber”) and the chamber without the LG conditioner assumed to be outside
(“outside chamber”).
Cages (25 cm3) are placed inside each chamber, connected using netted sleeves to enable the movement
of the mosquitoes from one cage to another.
One person is placed inside the chamber to attract mosquitoes.
For each test, 50 lab cultured 3-5 days old mosquitoes were placed in the cage in outside chamber; number
of mosquitoes coming into the cage in inside chamber was counted every 10 minutes for 90 minutes under
2 settings:
Control setting (low fan ON + mosquito repelling ultrasonic OFF)
Treatment setting (low fan ON + mosquito repelling ultrasonic ON)
Test Result:
Found to repel on average 81.1 % of Aedes aegypti mosquitoes. Repel rate shows percentage of mosquitoes
prevented from entering the inside chamber after 90 minutes of Treatment setting compared to Control setting.
Represented average of 81.1 % derived from 76.9 %, 84.6 %, 81.8 %.
B:
Tested by Intertek, Korea,
According to LG internal testing method.
Test conducted, three times at temperature of 27 ± 2 °C and humidity of 60 ± 10 %.
Test used two chambers size 33 m3 and 19 m3 connected by a channel made of white sheet, small
chamber assumed to be outside (“outside chamber”) and the large chamber to be inside with the
LG air conditioner (“inside chamber”)
One person is placed inside the inside chamber to attract mosquitoes.
For each test, 50 lab cultured 3-5 days old mosquitoes were released into outside chamber; number
of mosquitoes coming into the inside chamber was counted every 10 minutes for 90 minutes under
2 settings:
Control setting (low fan ON + mosquito repelling ultrasonic OFF)
Treatment setting (low fan ON + mosquito repelling ultrasonic ON)
Test Result:
Found to repel on average 72.5 % of Aedes aegypti mosquitoes. Repel rate shows percentage of mosquitoes
prevented from entering the inside chamber after 90 minutes of Treatment setting compared to Control setting.
Represented average of 72.5 % derived from 73.1 %, 64.3 %, 80.0 %.
Results may vary in other settings, including but not limited to temperature, humidity, location, space, mosquito
species, number of mosquitoes, number of persons, and operation time.
Download PDF