ENGLISH DP482B Internet Address: http://www.lge.com íôîðìàöèîííàß ñëóæáà LG : - Russia : 7- (495)771-76-76 - Ukraine : (380-44)490-7777, 8-800-303-0000 - Kazakhstan : 7-(727)272-22-22, 8-8000-805-805 ðîê ñëóæáû ïðèáîðà Ñ 7 ëåò ñî äíß ïåðåäà÷è òîâàðà ïîòðåáèòåëþ. P/NO : MFL61986220 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the productʼs enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from over heating. The openings shall be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product shall not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction has been adhered to. CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this ownerʼs manual carefully and retain it for future reference. Shall the unit require maintenance, contact an authorized service center.Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to 2 open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. CAUTION • The ventilation shall not be impeded by covering the ventilation openings with items, such as newspapers, table-cloth, curtains etc. • No naked flame sources, such as lighted candles, shall be placed on the apparatus. • Used batteries shall be disposed of safely and not incinerated. Attention shall be shown to the environment aspects of battery disposal. • Use the apparatus in tropical and moderate climates only. • The excessive sound pressure from earphones and headphones can cause hearing loss. • The battery shall not be exposed to excessive heat such as sunshine, fire or the like. • Do not remove the battery incorporated with product for your safety. If you need to replace the battery, take it to the nearest authorized LG Electronics service point or dealer for assistance CAUTION concerning the Power Cord Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized service center. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance.To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Warning for replaceable lithium battery • Danger of explosion if battery incorrectly replaced. • Replace only with the same type battery. • Additional warning marking close to the battery if intended to be replaced by users. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products shall be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. This product is manufactured to comply with EMC Directive 2004/108/EC and Low Voltage Directive 2006/95/EC. European representative : LG Electronics Service Europe B.V. Veluwezoom 15, 1327 AE Almere, The Netherlands (Tel : +31–036–547–8940) Contents Types of Playable Discs ............................................................................. 3 Rechargeable battery ................................................................................. 3 Main Unit .................................................................................................... 4 Remote Control .......................................................................................... 5 Power connections ..................................................................................... 6 Hooking up the unit ................................................................................... 7 Revolving the LCD panel ........................................................................... 7 Selecting the operation mode .................................................................... 7 Adjust the settings .................................................................................. 8-9 Displaying Disc Information ........................................................................ 9 Playing a Disc...................................................................................... 10-11 Playing a DivX movie file...........................................................................11 Listening to Music Disc or files................................................................. 12 Viewing photo files ................................................................................... 12 USB Direct Recording .............................................................................. 13 Using a USB Flash Drive ......................................................................... 13 Playing a Game ........................................................................................ 14 Language Codes ...................................................................................... 15 Area Codes .............................................................................................. 15 Troubleshooting ........................................................................................ 16 Specifications ........................................................................................... 16 Types of Playable Discs Type Logo DVD-VIDEO: Discs such as movies that can be purchased or rented. DVD-R: Video mode and finalized only DVD-RW: VR mode, Video mode and finalized only DVD+R: Video mode only DVD+RW: Video mode only Audio CD: Music CDs or CD-R/CD-RW in music CD format that can be purchased. This unit plays DVD±R/RW and CD-R/RW that contains audio titles, DivX, MP3, WMA and/or JPEG files. Some DVD±RW/DVD±R or CD-RW/CD-R cannot be played on this unit due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. About the Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this ownerʼs manual is not available on that disc. Regional Codes This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labeled same as the rear of the unit or “ALL”. • Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your unitʼs regional code or the disc cannot play. • If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. Copyrights It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs picture noise will appear. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. Rechargeable battery • Its internal rechargeable battery provides you with the freedom to pass it around and play the files without the power cord. • The internal rechargeable battery will start charging only when the unit is turned off and the AC adapter is connected to a power outlet. • The charging stops if you turn on the unit. • The charging will take approximately 4 hours. • Operating time on battery: approximately 4 hours and 30 minutes. The operating time on battery may vary depending on the battery status, operational status and environment conditions and the maximum playing time is approximately 5 hours and 30 minutes. • The battery indicator will turn red while charging. Once the charging is complete, the indicator light changes to green. • When the remaining time of the battery power is under a few minutes, “ will blink on the screen. ” "DVD Logo" is a trademark of DVD format/Logo Licensing Corporation. 3 Main Unit a LCD screen b Function buttons • SETUP: Accesses or exits the setup menu. • MENU: Accesses the DVD menu. • COLOR/BRIGHT*: Displays the Brightness or Colour menu for LCD display. • MODE: Selects a operation mode between [DISC] and [USB]. * To adjust the colour or brightness of the LCD display, press COLOR/ BRIGHT repeatedly on the main unit to display the Brightness or Colour menu then use b / B to adjust the value. Press ENTER to confirm the adjustment. c Menu control buttons • b B v V (left/right/up/down): Selects an item in the menu. • ENTER: Confirms menu selection. d Remote sensor: Point the remote control here. To control the unit using the remote control, do not fold the LCD panel down. e Speakers f OPEN (Z): Opens the disc lid. g Battery charge and power indicator • The indicator turns red in charging and changes to green colour when the charging is complete. (Refer to page 3 for details.) • The indicator turns green for a few seconds when the unit is turned on. h Disc Lid i USB Port: Connect a USB Flash Drive. 4 j Playback control buttons • N (Play) / X (Pause): Starts playback and pauses playback temporarily, press again to exit pause mode. • x (Stop): Stops playback. • . (Skip): Search backward* or returns to the beginning of current chapter or track or go to the previous chapter/track/file. • > (Skip): Search forward* or Go to next chapter/track/file. * Press and hold button for about two seconds. k 1/q (Power switch): Turn the unit ON or OFF. Note: To operate this unit, the power switch must be located ON. l w VOL (Volume): Adjusts the volume level of the built-in speaker and earphones. m (Earphones): Connect earphones here. n AV OUT: Connect to a TV with video and audio input. o DC 9V IN: Connect the AC adapter or automotive adapter. Remote Control Note: To operate this unit with remote control, the power switch must be located ON. (Refer to 4 page) Put the battery into the Remote Control ): Selects a DVD camera angle, if ANGLE ( available. SKIP/SEARCH (. / >): Search* backward / forward. Go to next or previous chapter/track/file. * Press and hold button for about two seconds. SLOW (t / T): Reverse/ Forward slow playback. l a b l l d l l l l l l a l l l l l l l POWER (1): Switches the unit ON or OFF. AUDIO ( channel. ): Selects an audio language or audio SUBTITLE ( l l l l l b l l l l l l l l l l l l l c l l l l l l ): Selects a subtitle language. l l l l l l d l l l l l l • Replace Remote Control unit battery with 3V micro lithium cells such as CR. 2025 or its equivalent. • Dispose of battery safety in accordance with local laws. Do not dispose of in fire. l PAUSE/STEP (X): Pauses playback temporarily/ press repeatedly for frame-by-frame playback. PLAY (N): Starts playback. STOP (x): Stops playback. Numerical buttons: Selects numbered options in a menu. PROG.: Enters the program edit mode. CLEAR: Removes a track number on the Program List. c l l SETUP: Accesses or exits the setup menu. MENU: Accesses the DVD menu. vV b B: Navigates the menus. ENTER ( ): Confirms menu selection. RETURN (O): Press to move backwards in the menu or exit the menu. DISPLAY: Accesses or exits On-Screen Display. Pinch the battery holder clip together then pull the tab to remove the battery holder. Insert the battery with the + facing in the same direction as the + on the battery holder. Replace the battery holder with battery into the Remote Control unit making sure that it is fully inserted. l TITLE: Access the discʼs title menu. REPEAT: Repeats a chapter, track, title or all. A-B: Repeats a section. ZOOM: Enlarges a video image. MARKER : Marks any point during playback. SEARCH : Displays [Marker Search] menu. RANDOM: Plays tracks in random order. Warning : The battery used in this device may present a fire or chemical burn hazard if mistreated. Do not recharge, disassemble, incinerate, or heat above 100 °C (212 °F). Replace the battery with Matsushita Elec. Ind. Co., Ltd. (Panasonic), part no. CR. 2025 only. Use of another battery may present a risk of fire or explosion. Dispose of used batteries. Keep batteries away from children. Do not disassemble or dispose of in fire. VIRTUAL SURROUND: Press repeatedly to apply the various sound effects. (Refer to 11 page) 5 Right side of the unit Power connections Connecting the AC Adapter Connect the supplied AC Adapter from the unit to a power socket. Right side of the unit Plug into the carʼs cigarette lighter socket. Plug into the “DC 9V IN” jack. Automotive adapter Plug into a power source. Plug into the “DC 9V IN” jack. * The actual set may differ from the drawing. AC adapter • This AC adapter operates on 100-240V~ 0.5A 50/60Hz. • Contact an electrical parts distributor for assistance in selecting a suitable AC plug adapter or AC cord set. • Manufactured by I-MAG ELECTRONICS(DONG GUAN) CO., LTD Connect the Automotive adapter This unit and its automotive adapter are designed for use in vehicles that have 8.5-16 volt, negative ground electrical systems. This is standard for most vehicles. If your vehicle has a different type of electrical system, the DC power system cannot be used. 6 • This automotive adapter operates on DC 8.5-16V. • Contact an electrical parts distributor for assistance in selecting a suitable automotive adapter. • Manufactured by GRAND POWER ELECTRONIC TECHNOLOGY (SHENZHEN) CO., LTD. Caution • To prevent electrical shock and possible damage to your unit or vehicle, always unplug the automotive adapter from the cigarette lighter socket before you remove the plug from your unit. • A 1.5 amp. 250V fuse for protection is installed in the automotive adapter. • While the engine is being started, disconnect the automotive adapter from the carʼs cigarette lighter socket. • Do not operate your unit when the car battery is discharged. Peak current from the car generator may cause the DC fuse to blow. • If the vehicleʼs supply voltage drops below approximately 10 volts, your unit may not work properly. • Do not leave your unit in a place where the temperature exceeds 70°C (158°F), or the pick-up device may be damaged. Examples include: - Inside a car with the windows closed and in direct sunshine. - Near a heating appliance. Hooking up the unit Revolving the LCD panel Audio and Video Connections to your TV You can revolve the LCD panel of the unit clockwise a maximum of 180 degrees for use. You can also operate the unit after revolving the LCD panel 180 degrees and folding it back down. Connect the AV OUT jack on the unit to the corresponding input jacks on your TV as shown below. Audio/Video Cable (not supplied) Right side of the unit yellow white red To revolve the LCD panel, place the unit on a stable and even surface such as on a table. Push the LCD panel up and then lift it into a vertical position. Revolve the LCD panel clockwise slowly 180 degrees. If you need, fold the LCD panel after revolving it. To revolve the LCD panel to its original position, open the LCD panel to a vertical position. Revolve the LCD panel counter clockwise slowly 180 degrees. • When finished using the unit, return the LCD panel to its original position. • Do not leave the LCD panel in the face-up position, or sudden shocks may damage it. Plug into the “AV OUT” jack. Selecting the operation mode Audio/Video Adapter You need to select a operation mode before using this unit. Press MODE on the unit and the operation mode selection menu appears. Use b / B to select a mode then press ENTER. • Select [DISC] to playback the inserted disc. • Select [USB] to playback the file(s) in the connected USB Flash Drive. 7 Adjust the display settings Adjust the settings ON REMOTE TV Aspect – Select which screen aspect to use based on the shape of your TV screen. [4:3]: Select when a standard 4:3 TV is connected. 1 Display setup menu: SETUP 2 Select a desired option on the first level: vV 3 Move to second level: B 4 Select a desired option on the second level: vV 5 Move to third level: B 6 Change the setting: v V / ENTER Adjust the settings - more you can do When you turn on for the first time (optional) The menu for a language selection will appear when you turn on the unit for the first time. You must select a language to use the unit. Use vV b B to select a language then press ENTER and the confirm menu will appear. Use b B to select [ENTER] then press ENTER. Adjust the language settings Menu Language – Select a language for the Setup menu and on-screen display. Disc Audio/Subtitle/Menu – Select a language for the Disc Audio/Subtitle/ Menu. [Original]: Refers to the original language in which the disc was recorded. [Other]: To select another language, press number buttons then ENTER to enter the corresponding 4-digit number according to the language code list. (see page 15) If you make a mistake while entering number, press CLEAR to delete numbers then correct it. [Off] (for Disc Subtitle): Turn off Subtitle. 8 [16:9]: Select when a 16:9 wide TV is connected. Display Mode – If you selected 4:3, youʼll need to define how you would like widescreen programs and films to be displayed on your TV screen. [Letterbox]: This displays a widescreen picture with black bands at the top and bottom of the screen. [Panscan]: This fills the entire 4:3 screen, cropping the picture as necessary. Adjust the audio settings DRC (Dynamic Range Control) – Make the sound clear when the volume is turned down (Dolby Digital only). Set to [On] for this effect. Vocal – Set to [On] only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc mix into normal stereo sound. Adjust the lock settings You must set the [Area Code] option to use the lock options. Select [Area Code] option then press B. Enter a 4-digit password then press ENTER. Enter it again then press ENTER to verify. If you make a mistake while entering number, press CLEAR then correct it. If you forget your password you can reset it. First, remove the disc in the unit. Display setup menu then input the 6-digit number “210499” and the password will be cleared. Rating – Select a rating level. The lower the level, the stricter the rating. Select [Unlock] to deactivate the rating. Password – Sets or changes the password for lock settings. [New]: Enter a new 4-digits password using the numerical buttons then press ENTER. Enter the password again to confirm. [Change]: Enter the new password twice after entering the current password. Area Code – Select a code for a geographic area as the playback rating level. This determines which areaʼs standards are used to rate DVDs controlled by the parental lock. (See page 15) Adjust the others settings REC Bit Rate – You can choose a bit rate for USB direct recording. Higher bit rate gives the better sound quality but uses more space on the USB Flash Drive. For USB direct recording, see page 13. DivX(R) VOD – We provide you with the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos using the DivX® VOD service. For more information, visit www.divx.com/vod. Press ENTER when [Select] icon is highlighted and you can view the registration code of the unit. All the downloaded videos from DivX® VOD can only be played back on this unit. Game – You can play games with this unit using remote control. (See “Game” on page 14) [Select]: The game menu appears on the TV screen. Displaying Disc Information BUTTON 1 Press DISPLAY during playback: DISPLAY 2 Select an item: vV 3 Adjust the Display menu settings: b B / ENTER 4 Exit the menu: DISPLAY Displaying Disc Information - more you can do You can select an item by pressing vV and change or select the setting by pressing b B or using the numbered buttons (0-9). Current title number/total number of titles Current chapter number/total number of chapters Elapsed playing time Selected audio language or channel Selected subtitle Selected angle/total number of angles You can check the battery charge status by pressing DISPLAY during playback when the DC 9V IN jack is not connected. Full Low Recharge Symbol Used in this Manual A section whose title has one of the following symbols are applicable only to the disc or file represented by the symbol. ALL All discs and files ACD Audio CDs DVD DVD and finalized DVD±R/RW MP3 MP3 files DivX DivX files WMA WMA files 9 DivX DVD Frame-by-Frame playback Playing a Disc Press PAUSE/STEP (X) repeatedly to play Frame-by-Frame playback. BUTTON Playing repeatedly ALL 1 Open the disc lid: OPEN (Z) 2 Insert a disc: - Press REPEAT repeatedly to select an item to be repeated. The current title, chapter or track will be played back repeatedly. To return to normal playback, press REPEAT repeatedly to select [Off]. 3 Close the disc lid: - Fast forward or fast reverse Press and hold SKIP (. or >) to play fast forward or fast reverse during playback. You can change the various playback speed by pressing and hold SKIP (. or >) repeatedly. Press PLAY ( N) to continue play at normal speed. 4 Start playback: N PLAY 5 Adjust the volume: VOLUME 6 To stop playback: x STOP DivX DVD Repeating a specific portion (A-B) Playing a Disc - more you can do Stops the playback Press STOP (x) to stop playback, the unit records the stopped point depending on the disc. “ Xx ” appears on the screen briefly. Press PLAY ( N) to resume playback (from the scene point). If you press STOP (x) again or unload the disc (“ x ” appears on the screen), the unit will clear the stopped point. (Xx =Resume Stop, x =Complete Stop) The resume point may be cleared when a button is pressed. (for example: POWER, OPEN, etc) Playing a DVD that has a menu DVD Most DVD now have menus which load first before the film begins to play. You can navigate these menus using vV b B or number button to highlight an option. Press ENTER to select. Playing a DVD VR disc This unit will play DVD-RW disc that is recorded using the Video Recording (VR) format. When you insert a disc DVD VR disc, the menu will appear on the screen. Use vV to select a title then press PLAY ( N). To display DVD-VR menu, press MENU or TITLE. Some DVD-VR disc are made with CPRM data by DVD RECORDER. The unit does not support these kinds of discs. Skip to the next/previous chapter/track/file ALL Press SKIP (>) to move to the next chapter/track/file. Press SKIP (.) to return to the beginning of the current chapter/track/file. Press SKIP (.) twice briefly to step back to the previous chapter/track/file. Pause a playback ALL Press PAUSE/STEP (X) to pause playback. Press PLAY ( N) to continue playback. 10 DVD ACD DivX WMA MP3 ACD Press A-B at the beginning of the portion you wish to repeat and again at the end of the portion. Your selected portion will be repeated continually. To return to normal playback, press A-B to select [Off]. Selecting a subtitle language DivX DVD During playback, press SUBTITLE ( language. ) repeatedly to select a desired subtitle Watching from a different angle DVD If the angle indicator appears on the screen for a moment, you can select a different camera angle by pressing ANGLE ( ) repeatedly. Hearing a different audio DVD DivX During playback, press AUDIO ( ) repeatedly to switch between the available audio languages, channels or encoding methods. Slow down the playing speed DVD ( DivX : Forward only) During playba ck, press SLOW (t or T) to slow down reverse or forward playback. You can change the various playback speed by pressing SLOW (t or T) repeatedly. Press PLAY ( N) to continue play at normal speed. Watching an enlarged video image DVD DivX During playback or pause mode, press ZOOM repeatedly to select zoom mode. You can move through the zoomed picture using vVb B buttons. Press CLEAR to exit. (100% p 200% p 300% p 400% p 100%) Viewing the title menu DVD Press TITLE to display the disc's title menu, if available. Viewing the DVD menu Playing a DivX movie file DVD BUTTON Press MENU to display the disc menu, if available. Starting play from selected time DVD DivX Searches for the starting point of entered time code. Press DISPLAY then select clock icon. Enter a time then press ENTER. For example, to find a scene at 1 hours, 10 minutes, and 20 seconds, enter "11020" and press ENTER. If you enter the wrong number, press CLEAR to enter again. Playing in random order ACD WMA 1 Open the disc lid: OPEN (Z) 2 Insert a disc: - 3 Close the disc lid: - 4 Select a movie file from the menu: v V, MENU To go directly to file and play, enter the file number using the numbered buttons (0-9). MP3 During playback or in stop mode, press RANDOM for playback in random order. Press RANDOM again to return to normal playback. 5 Start playback: N PLAY DivX 6 To stop playback: x STOP Mark a scene on a disc DVD You can mark a position on a disc to return to at the place. Simply press MARKER at the desired position. The marker icon will appear on-screen briefly. Repeat to place up to nine markers. Also you can recall or clear the positions. Press SEARCH and [Marker Search] menu will appear. Use b or B to select a desired marker on the menu, then press ENTER to recall it or CLEAR to clear it. Last Scene Memory DVD ACD This unit memorizes last scene from the last disc that is viewed. The last scene remains in memory even if you remove the disc from the player or switch off the unit. If you load a disc that has the scene memorized, the scene is automatically recalled. Screen Saver The screen saver appears when you leave the unit in Stop mode for about five minutes. If the Screen Saver is displayed for five minutes, the unit automatically turns itself off. Virtual Surround You can enjoy the surround sound simply by selecting one of the pre-programed sound field according to the program you want to listen to. Each time you press VIRTUAL SURROUND, the sound mode is changed as follows. Concert t Hall t Arena Mixed disc or USB Flash Drive – DivX, MP3/WMA and JPEG When playing a disc or USB Flash Drive contained with DivX, MP3/WMA and JPEG files together, you can select which menu of files you would like to play by pressing TITLE. Playing a DivX movie file - more you can do Changing the character set to display DivX® subtitle correctly Press and hold SUBTITLE for 3 seconds during playback. The language code will appear. Press b B to select another language code until the subtitle is displayed properly and then press ENTER. DivX file requirement DivX file compatibility with this player is limited as follows: • Available resolution size: 720x576 (W x H) pixel. • The file names of DivX and subtitle are limited to 45 characters. • DivX file extensions: “.avi”, “.mpg”, “.mpeg” • Playable DivX subtitle: SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.txt), DVD Subtitle System (.txt) • Playable Codec format: “DIVX3.xx”, “DIVX4.xx”, “DIVX5.xx”, “MP43”, “3IVX” • Only the playback function is supported with DivX 6.0 in the unit. • Playable Audio format: “Dolby Digital”, “PCM”, “MP3”, “WMA” • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48 kHz (WMA) • Bit rate: within 8 - 320 kbps (MP3), within 32 - 192 kbps (WMA), less than 4Mbps (DivX file) • CD-R/RW, DVD±R/RW Format: ISO 9660 • Maximum Files/Folders: Less than 600 (total number of files and folders) 11 Listening to Music Disc or files Viewing photo files BUTTON BUTTON 1 Open the disc lid: OPEN (Z) 1 Open the disc lid: OPEN (Z) 2 Insert a disc: - 2 Insert a disc: - 3 Close the disc lid: - 3 Close the disc lid: - Select a music from the menu: Select a photo file on the menu: To go directly to track/file and play, enter the track/file number using the numbered buttons (0-9). v V, MENU 4 5 Start playback: N PLAY 5 To stop playback: x STOP Photo information displays on the screen. If you want to hide it, press RETURN (O) N PLAY 6 6 To return to the menu: x STOP 4 To go directly to file and play, enter the file number using the numbered buttons (0-9). v V, MENU Display the selected file in full screen: Listening to Music Disc or files - more you can Viewing photo files - more you can do Viewing photo files as a slide show do Creating your own program You can play the contents of a disc in the order you want by arranging the order of the musics on the disc. To add a music(s) on the program list, press PROG. to enter the program edit mode ( E mark appears on the menu). Select a desired music on the [List] then press ENTER to add the music to the program list. Select a music from the program list then press ENTER to start programmed playback. To clear a music from the program list, select the music you want to clear then press CLEAR in program edit mode. To clear all music from the program list, select [Clear all] then press ENTER in program edit mode. The program is cleared when the disc is removed or the unit is turned off. Displaying file information (ID3 TAG) While playing a MP3 file containing file information, you can display the information by pressing DISPLAY repeatedly. If the file does not have ID3-Tag information, [NO ID3 TAG] appears on the screen. MP3/WMA music file requirement MP3/WMA compatibility with this unit is limited as follows: • File extensions: “.mp3”, “.wma” • • • • Sampling frequency: within 8 - 48 kHz (MP3), within 32 - 48kHz (WMA) Bit rate: within 8 - 320kbps (MP3), within 32 - 192kbps (WMA) CD-R/RW, DVD±R/RW Format: ISO 9660 Maximum Files/Folders: Less than 600 (total number of files and folders) 12 Use vV b B to highlight ( ) icon then press ENTER to start slide show. You can change slide show speed using b B when ( ) icon is highlighted. Skip to the next/previous photo Press SKIP (. or >) to view the previous/next photo in full screen. Rotate a photo Use vV to rotate the photo in full screen counter clockwise or clockwise while viewing a photo in full screen. Pause a slide show Press PAUSE/STEP (X) to pause a slide show. Press PLAY ( N) to continue the slide show. Listening to music during slide show You can listen to music during slide show, if the disc contain music and photo ) icon then press ENTER to start files together. Use vV b B to highlight ( slide show. Watching an enlarged photo image While viewing a photo in full screen, press ZOOM repeatedly to select zoom mode. You can move through the zoomed photo using vVb B buttons. Press CLEAR to exit. Photo file requirement JPEG file compatibility with this unit is limited as follows: • File extensions: “.jpg” • Photo size: Less than 2MB recommended • CD-R/RW, DVD±R/RW Format: ISO 9660 • Maximum Files/Folders: Less than 600 (total number of files and folders) USB Direct Recording Connect USB Flash Drive to the unit before recording. Set [REC Bitrate] option to [96 kbps] or [128 kbps] as required. (See page 9) BUTTON The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recording, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Be responsible Respect copyrights 1 Insert an Audio CD: - Using a USB Flash Drive 2 Select a track: To go directly to track and play, enter the track number using the numbered buttons (0-9). v V, MENU You can play MP3/WMA/JPEG/DivX files in the USB Flash Drive with version 1.1, 2.0. 3 Start recording: 4 To stop recording: BUTTON AUDIO x STOP Recordable mode You can record a desired track or all of the tracks in Audio CD to USB Flash Drive. • For track recording: Press AUDIO in play, pause or resume stop mode. • For disc recording: Press AUDIO in complete stop mode. • For program list recording: In stop mode, press AUDIO after selecting a track on the program list. Notes a USB direct Recording • The recording is available only for Audio CD tracks. • If you use this function, the “CD_REC” folder will be created automatically in the USB Flash Driver then the music file(s) is saved in it. • If you remove the USB Flash Drive, turn off or open the unit while recording, it can make malfunction. • During the recording is no sound. • If the remaining space on the USB Flash Drive is insufficient, the recording is not available. To increase the free space, delete files in it using your PC. • CD-G disc and Audio CDs encoded in DTS cannot be recorded. • External HDD, Multi Card reader, Multi Partition USB, Locked device and MP3 player is not supported. • Recording format: MP3 file • Encoding Bitrate: 96 kbps / 128 kbps • Maximum Files/Floder: Less than 600 (total number of files and folders) 1 2 Connect a USB Flash Drive to the USB port on the unit: Display the menu to select the USB operation mode: MODE 3 Select [USB]: b B, ENTER 4 Select a file: To go directly to file and play, enter the file number using the numbered buttons (0-9). v V, MENU 5 Play the file: N PLAY 6 Remove the USB Flash Drive: - Notes a USB Flash Drive • You can switch between [DISC] and [USB] mode using MODE button. • Do not extract the USB device in operating. • We recommend that you back up your important files in the USB Flash Drive to protect against accidental loss. • If you use a USB extension cable or USB HUB, the USB device might not be recognized. • Music files (MP3/WMA), photo files (JPEG) and DivX files can be played. For details of operations on each files, refer to relevant pages. • Maximum Files/USB Flash Drive: Less than 600 (total number of files and folders) • The USB function of this unit does not support all kinds of USB devices. • Digital camera and mobile phone are not supported. 13 Shanghai Playing a Game BUTTON You can enjoy this game by selecting and deleting same two blocks. Move the cursor to select the first block and second block that you want to delete, then you can delete the two blocks. The two blocks can be selected when those blocks are connected with a line whose direction is shifted only twice. When all blocks on screen are deleted, you can move to the next stage. 1 Displays the setup memu: SETUP 2 Select [Game] on the [OTHERS]: vV/B 3 Select [Select]: ENTER vV b B: Move the Cursor. 4 Select and start a game: v V / ENTER ENTER: Select. 5 To return to the [GAME MENU]: O RETURN 1 (HELP): A removable block is automatically selected. Key configuration: 2 (BACK): A block deleted a short time ago is restored. Playing a Game - more you can do Same game You can enjoy this game by deleting all balls on screen. Move the cursor to select a ball you want to delete. And press Enter twice, the selected ball will be deleted. Only when more than two balls of the same color are connected, you can delete all of them. When all balls on screen are deleted, you can move to the next stage. Key configuration: RETURN: Cancel the Selection. ENTER: Select. Black jack Black jack is a card game. The one whose cards add closest to 21 wins the game. The player and the banker get dealt two cards each. The player then chooses to receive another card (Hit) or use what was dealt (Stand). You can get as many cards as you can. Key configuration: ENTER: Start game. b: Hit B: Stand vV: Adjusts amount of money to bet from 10G to 100G. vV b B: Move the Cursor. Othello Acorn How to play Othello is that you place one of your chips on the board, adjacent to an opponentʼs chip so as to capture the opponentʼs line of chips betweeen one of your own already on the board and the new one. This play continues until the board is completely full of chips. The basical game instruction is to collect the acorn. When you clear a stage, next stage will start with increased numbers of acorns to collect and faster game speed. Key configuration: b: Moves the unit to the left. B: Moves the unit to the right. 14 Key configuration: ENTER: Select. vV b B: Move the Cursor. Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali, Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Chinese Code 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 9072 Language Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Code 7282 6783 6865 7876 6978 6979 6984 7079 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 Language Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Code 7678 7684 7775 7771 7783 7776 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 Language Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Singhalese Slovak Slovenian Spanish Sudanese Swahili Swedish Tagalog Code 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 8373 8375 8376 6983 8385 8387 8386 8476 Language Tajik Tamil Telugu Thai Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8471 8465 8469 8472 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose an area code from this list. Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG Area Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador Ethiopia Fiji Finland France Germany Great Britain Greece Code CR HR CZ DK EC EG SV ET FJ FI FR DE GB GR Area Greenland Hong Kong Hungary India Indonesia Israel Italy Jamaica Japan Kenya Kuwait Libya Luxembourg Malaysia Code GL HK HU IN ID IL IT JM JP KE KW LY LU MY Area Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Code MV MX MC MN MA NP NL AN NZ NG NO OM PK PA Area Paraguay Philippines Poland Portugal Romania Russian Federation Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Code PY PH PL PT RO RU SA SN SG SK SI ZA KR ES Area Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code LK SE CH TW TH TR UG UA US UY UZ VN ZW 15 Troubleshooting Symptom No power. Specifications Cause The power cord is disconnected. Correction Plug the power cord into the wall outlet securely. The battery is discharged. Recharge the battery. The power is on, but the unit does not work. No disc is inserted. Insert a disc. No picture. The TV is not set to receive the signal from the unit. Select the appropriate video input mode on the TV. The video cable is not connected securely. Connect the video cable securely. The equipment connected with the audio cable is not set to receive the signal from the unit. Select the correct input mode of the audio amplifier. The volume is set to minimum. Use the volume controller to adjust the volume. The AUDIO options are set to the wrong position. Set the AUDIO settings to the correct position. The unit does not start playback. An unplayable disc is inserted. Insert a playable disc. (Check the disc type and regional code.) The rating level is set. Change the rating level. The remote control does not work properly. The remote control is not pointed at the remote sensor on the unit. Point the remote control at the remote sensor of the unit. The remote control is too far from the unit. Operate the remote control closer to the unit. No sound. General Power requirements Power consumption External Dimensions Net Weight (Approx.) Operating temperature: Operating humidity Laser Signal system DC 9V 12 W 221 x 32.7* x 175 mm (W x H x D) (*based upon the front side) 1.08kg 0 °C to 40 °C 5 % to 90 % Semiconductor laser PAL Connectors Audio/Video Output ø3.5mm mini jack x 1 - Video: 1.0 V (p-p), 75 Ω, sync negative - Audio: 2.0 Vrms (1 KHz, 0 dB) Earphone terminal ø3.5mm stereo mini jack x 2 USB IN 4 pin (USB 2.0 / 1.1 standard) Liquid Crystal Display Panel size Projection system Driving system Resolution 8.5 inches wide (diagonal) R.G.B. stripe TFT active matrix 480 x 234 (WQVGA) Accessories • • • • • Audio/Video adapter AC Adapter (IM090WU-150B) Automotive Adapter (Cu-2993) Remote Control Battery for Remote Control (Lithium Battery) Designs and specifications are subject to change without prior notice. 16 Enjoying in a car with the Headrest Mounting Bracket Headrest Mounting Bracket Installation a Separate the headrest. (Refer to your carʼs user guide.) You can enjoy video in the back seat attaching the unit to the back of the front seat. Warnings • The driver must not operate this unit while the vehicle is moving. Do not operate this unit where it can be viewed by the driver. Driver operation or viewing of this unit while the vehicle is moving will cause distraction which may result in serious accident and personal injury or property damage. • Do not attach or detach while driving, and do not attach in the following locations, otherwise it may result in injury or traffic accidents: – anywhere other than the back of the seat – in a location that interferes with the driverʼs view or operation of the car – in a location that interferes with the operation of an airbag – in a location that interferes with the driving instruments. • Depending on the type of headrest, you may not be able to attach the bracket. 22 cm or less b Install the headrest mount cradle as shown in the figure. a Fixing Screw Fixes the unit on the bracket. b Tilt Fixing Screw Fixes a tilt angle of the bracket. c Horizontal Fixing Screw Fixes a horizontal angle of the bracket. d Release knob Press both knobs to release the bracket body from the cradle. Note: If you may not be able to install the headrest cradle because of the pipe thickness of your headrest, extend the headrest cradle loosing its screws and install it. c Put the unit on the bracket and fix it using the fixing screw. e Headrest Mounting Cradle d Fit the bracket body fixed the unit to the cradle. e Adjust the horizontal and tilt angle of the bracket and enjoy the unit.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project