LG | DVR587X | Owner's Manual | LG DVR587X Owner's manual

LG DVR587X Owner's manual
RC7724NP4L_NA3RML_27W_ENG
DVD RECORDER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
DVR587X
PAL
CD-R/RW
BZ03
Before
connecting, operating
please
read this instruction
Internet
adjusting this product,
booklet carefully and completely.
or
Address:http://www.lg.ru
»IUO I‡?EOII‡ˇ OIUE・‡ LG Electronics (095)771-76-76
Safety
Precautions
CAUTION
NOTES ON COPYRIGHTS:
RISK OF ELECTRIC SHOCK
DO NOT OPEN
It is forbidden
via cable,
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash
equilateral triangle
with arrowhead
symbol
is intended to alert the
within
user
an
to
the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient
to constitute
magnitude
risk of electric
a
law to copy, broadcast, show, broadcast
in public, or rent copyrighted material without
by
play
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on some
discs. When recording and playing the pictures of these discs
on a VCR, picture noise will appear.
This product incorporates copyright protection technology that
is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
shock to persons.
SERIAL NUMBER: The serial number is found
The exclamation
point
within
is intended to alert the
important operating
user
an
equilateral triangle
to the presence of
and maintenance
instructions in the literature
(servicing)
accompanying the
product.
on
the back of
this unit. This number is
unique to this unit and not available
others. You should record requested information here and
retain this guide as a permanent record of your purchase.
Model No.
Serial No.
to
___________________________________
___________________________________
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
WARNING: Do not install this
such
as a
book
equipment
in
confined space
a
similar unit.
case or
attached to
covered
product it means the
by the European Directive
a
symbol is
product is
2002/96/EC.
2. All electrical and electronic
products should
be disposed of separately from the municipal
waste stream via designated collection facilities appointed by the government or the local
CAUTION:
This DVD Recorder
To
ensure
manual
proper
carefully
employs
use
of this
a
Laser
authorities.
System.
product, please
3. The correct
read this
owner 's
and retain for future reference should the unit
require maintenance, contact
(see service procedure).
an
Use of
or
controls, adjustments,
dures other than those
specified
authorized service location
the
of proceherein may result in haz-
performance
ardous radiation exposure.
To
prevent direct exposure
to laser
beam, do
not
try
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with liquids, such
as
vases, should be
This
placed
product
on
the
is manufactured to
the radio interference
DIRECTIVE
73/23/EEC.
2
apparatus.
comply with
requirements of EEC
89/336/EEC, 93/68/EEC and
disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
4. For
detailed information about
disposal
of your old appliance, please contact your city
office, waste disposal service or the shop
where you purchased the product.
more
Table of Contents
INTRODUCTION
HOOKUP
SafetyPrecautions.......................2
TableofContents......................3-4
Overview............................5-10
RecordableDiscs.......................5
PlayableDiscs.........................5
Disc-relatedterms......................6
?TypesofvideoCDs..................6
AboutSymbols.........................6
?Aboutthesymboldisplay............6
About the disc symbols for instructions
6
?
AboutDVD-RandDVD-RWdisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatare'recordingmodes'?.
Is editing a DVD like editing a video tape?
About word 'Original' and 'Playlist'
.
.
.
.
.
.
.
.
.
.
.7
.7
?
.
?
AboutDVD+RandDVD+RWdisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7
7
.7
AboutDVDrecording....................8
Disc types and recording formats, modes,
andsettings........................8
?Notesforrecording...................8
.9
?RecordingTVaudiochannels.
.9
?Restrictionsonvideorecording.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Whatis'CPRM'?....................9
?Copyright..........................9
Cards capable of displaying and saving
9
?
.
.
.
Precautions..........................10
Connections........................15-18
ConnectingtotheAerial.................15
ConnectionstoYourTV.................15
16
Connecting to a cable box or satellite receiver
16
Connecting an external decoder box
ConnectingtoanAmplifier...............17
Accessory Audio/Video (A/V) Connections
.
.
.
.
.
.
.
.
.
.
toRecorder..........................18
.18
ConnectingaDigitalCamcorder.
BeforeOperation.....................19-31
InitialSettings.........................19
GeneralOperation.....................19
.
.
.
.
.
.
.
.
.
GENERAL.........................19-23
?AutoProgramming..................19
?ProgramEdit....................20-21
?ClockSet.........................22
?TVAspect........................22
?VCRPlayAspect...................22
?VCRPlaySystem...................23
?AV2Connection....................23
?ProgressiveScan...................23
?FactorySetting.....................23
LANGUAGE..........................23
?DisplayLanguage..................23
?DiscLanguage.....................23
?Handlingtheunit...................10
?Cleaningtheunit...................10
AUDIO..............................24
NotesonDiscs........................10
?DTS.............................24
?Handlingdiscs.....................10
?Storingdiscs......................10
?Cleaningdiscs.....................10
.10
RemoteControlOperationRange.
Remote Control Battery Installation
10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ResettheRecorder.....................10
FrontPanel............................11
FunctionDisplayWindow................12
?DolbyDigital.......................24
?MPEG...........................24
?SamplingFrequency................24
.24
DRC(DynamicRangeControl).
?
.
.
.
.
.
.
.
?Vocal............................24
LOCK(ParentalControl).
.
.
.
.
.
.
.
.
.
.
.
.25-26
.
?SetPassword......................25
?Rating...........................25
?AreaCode........................26
RemoteControlOverview................13
RECORD..........................26-27
RearPanel............................14
?DiscRecordMode..................26
?VCRRecordMode..................26
?VCRRecordSystem................27
?DVRecordAudio...................27
?AutoChapter......................27
DISC.............................27-29
?Initialize..........................27
?Finalize..........................28
?DiscLabel........................28
?DiscProtect.......................29
?PBC.............................29
?AutoPlay........................29
?AboutDivX(R).....................29
General Explanation of On-Screen Display. 30-32
30-32
Displaying Information on-screen
30
Displaying Information While Watching TV
?ChangingTVChannels..............30
.30
?ChangingTVAudioChannel.
?
.
.
.
.
.
?
.
.
.
.
.
.
.
.
.
.
.
3
INTRODUC
Table of Contents
PLAYBACK
33-36
Operation with DVD and Video CD.
PlayingaDVDorVideoCD..............33
.
.
.
.
.
.
GeneralFeatures......................33
?MovingtoanotherTITLE.............33
33
Moving to another CHAPTER/TRACK
?
.
.
.
?Search...........................33
?
Still Picture and
Frame-by-Frame Playback
.
33
?SlowMotion.......................34
?Playmodes.......................34
?RepeatA-B.......................34
CopyingfromDVDtoVCR...............45
CopyingfromVCRtoDVD...............45
TimerRecording.....................46-47
47
Checking Timer Recording Details
.47
CancelingaTimerRecording.
47
Stopping a Timer Recording in Progress
Timer Recording Troubleshooting
47
48-49
Recording from an External Input
48
Recording from External Components
48
Recording from a Digital Camcorder
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
WhatisDV?..........................49
?T imeSearch.......................34
?DV -RelatedMessages...............49
?Zoom............................35
?T roubleshooting....................49
?MarkerSearch....................35
?
the contents of
DVDVideodiscs:Menus.............35
Checking
?T itleMenu........................35
?DiscMenu........................35
?CameraAngle.....................35
.35
ChangingtheAudioSoundtrack.
.36
?ChangingtheAudioChannel.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?3DSurround......................36
?Subtitles..........................36
.36
?FindingLocationsonaDisc.
?LastConditionMemory...............36
PlayingaDivXMovieDisc................37
38-39
Audio CD and MP3/WMA Operation
.38
PlayinganAudioCDorMP3/WMADisc.
Musicmenuoptions....................38
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
?Pause...........................39
?MovingtoAnotherTrack..............39
?Playmodes.......................39
.39
?ChangingtheAudioChannel.
.
.
.
.
.
.
.
.
?Search...........................39
?RepeatA-B.......................39
.39
NotesonMP3/WMARecordings.
Programmed Playback with Audio CD and
.
.
.
.
.
.
.
MP3/WMA.............................40
JPEGFileOperation..................41-42
ViewingaJPEGFile....................41
?Photo-CDmenuoptions..............41
.41
?Photo-Memorymenuoptions.
?SkipImages.......................42
?RotateImages.....................42
.
.
.
.
.
.
.
.
?V iewSlideShows...................42
?
Copying JPEG file(s) on the disc
toMemoryCard....................42
Erasing JPEG file(s) or folder(s) from
theMemoryCard...................42
.42
?NotesonJPEGRecordings.
VCRModeTapePlayback................43
Preparation...........................43
NormalPlayback......................43
?T rackingControl....................43
SpecialEffectPlayback..................43
?
.
.
.
.
.
.
.
.
.
?Search...........................43
?
Still Picture and
Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
.
.43
RECORDING
BasicRecording.....................44-45
BasicRecordingfromaTV...............44
InstantTimerRecording.................44
4
.50-54
TitleListandChapterListMenu
VR
the
Title
menu
......50
Using
List-Original
VR
the
menu
...50
Using
Chapter List-Original
Using the Title List-Playlist menu VR ......51
Using the Chapter List-Playlist menu VR ...51
Video
the
Title
List
menu
............52
Using
?DeletingaTitle.....................52
If the disc has already been finalized
52
Using the Title List menu +RW ............53
Using the Chapter List menu +RW .........53
+R
the
Title
List
menu
............54
Using
+R
the
List
menu
.........54
Using
Chapter
.55-60
TitleandChapterEditing.
Titles,ChaptersandParts................55
AddingChapterMarkers.................55
ChangingTitleThumbnails...............55
MakingaNewPlaylist...................56
Adding Additional Title/Chapters to the Playlist 56
DeletingaTitle/Chapter.................57
DeletingaPart........................57
NamingaTitle........................58
.58
CombiningTwoChaptersIntoOne.
MovingaPlaylistChapter................59
.
.
.
.
.
.
.
?
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ProtectaTitle.........................59
HideaTitle/Chapter....................60
DivideOneTitleIntoTwo................60
AdditionalInformation...................61
OverwriteRecording....................61
Viewing Title List menu displayed on other
DVDrecordersorplayers................61
Playing Your Recordings on other
.61
DVDPlayers(FinalizingaDisc).
.
.
.
.
.
.
.
.
.
REFERENCE
LanguageCodeList.....................62
AreaCodeList.........................63
Controlling Your TV with the Supplied Remote 64
.
Troubleshooting.....................65-66
Specifications.........................67
43
?SlowMotion.......................43
?CounterMemoryFunction.
EDITING
About the
symbols
for instructions
Indicates hazards
itself
or
other
likely to cause
material damage.
Indicates
special operating
Indicates
tips
and hints for
harm to the unit
features of this unit.
making
the task easier.
Overview
Recordable Discs
DVD-RW
Playable
Video Disc
(Digital
These Discs
Recordings can
record again on
be
DVD-R
Video Disc
(Digital
These Discs
erased, then you
the
These Discs
can
(VCD)
(8cm/12cmdisc)
Audio CD
(8
cm/12
cm
disc)
In
ReWritable):
on repeatedly.
+
erased, then you
the
disc)
Video CD
Recordable):
recorded only once.
be recorded
be
Recordings can
record again on
cm
-
Video Disc
(Digital
cm/12
can
After you finalize a DVD-R, you cannot
record on it or edit it any more.
DVD+RW
(8
Disc.
same
be
can
DVD
ReWritable):
on repeatedly.
-
be recorded
can
Discs
can
addition, this unit can play DVD-R/DVD-RW discs;
DVD+R/DVD+RW discs; CD-R/CD-RW discs that
contain audio titles, MP3 files, WMA files, or JPEG files;
and SVCD.
Disc.
same
otes
DVD+R
Video Disc
(Digital
These Discs
can
Recordable):
only once.
+
be recorded
--
After you finalize a DVD+R, you cannot
record on it or edit it any more.
--
DVD+R DL
(Digital
Video Disc
+
Recordable; Double Layer): Storage space
is
nearly doubled with double layer
media, allowing consumers to burn
8.5GB of video on a single DVD+R
--
DVD+R
up to
disc.
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/±RW) disc itself,
some CD-R/RW (or DVD±R/±RW) discs cannot be
played on the unit.
Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). Doing so may result in malfunctions.
Regional
on
code of the DVD Recorder and DVDs
This DVD Recorder is
tured for
otes
--
--
This recorder cannot record CD-R
DVD-R/RW,
ed
using
or
CD-RW discs.
DVD+R/RW and CD-R/RW discs record-
personal computer
may not play if the disc
recorder
or
a
DVD
or a
if there is dirt of condensation
is
or
damaged
on
dirty,
the recorder's
lens.
--
If you record a disc
if it is recorded in a
cases
in which it
using a personal computer, even
compatible format, there are
may not play because of the settings
those discs. This unit
labeled 5
message
appear
have a
on
the TV
compensate the contents which should have been
recorded, and any losses or damages (e.g. losses of
business
profit,
or
business
arise from malfunction of
intermission) that may
this recorder (not record-
ing/editing as intended).
Problems arising in the following
?
When
in
a
a
DVD disc recorded
situations
on
DVD recorder of another
?
When
a
again
in this recorder.
When
a
another
editing)
or
DVD that has been used
DVD disc recorded in
manufacturer,
or
in
a
included.
this recorder is used
manufacturer,
(insertion, playback, recording
personal computer DVD drive.
?
are
a
as
in
or
the labels of
some
type of DVD Recorder
can
on
can
Some DVD discs may not
code label even though their playback is
region
prohibited by area
otes
on
5
play only DVD discs
or ALL. If you try to play any other discs, the
"Incorrect region code. Can't play back" will
of the
--
application software used to create the disc.
(Check with the software publisher for more detailed
information.)
The company does not hold any responsibility to
code
DVD discs indicates which
play
CD
or
playback of
software. The region
designed and manufacRegion 5 encoded DVD
screen.
limits.
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally fixed by software manufacturers.
As this unit plays DVDs and Video CDs according to
disc content designed by the software manufacturer,
some playback features of the unit may not be available
other functions may be added.
Refer also to the instructions supplied with the DVDs
or
and Video CDs. Some DVDs made for business purposes may not be played on the unit.
used
a
above is used
DVD recorder of
personal computer
DVD drive is used.
5
INTRODUC
Overview
(Continued)
Disc-related terms
About
Title
About the
(DVD only)
The main film content
accompanying
or
"
Each title is
assigned
locate it easily.
you to
a
title reference number
enabling
(Video
Sections of
audio
or an
enabling
CD and audio CD
only)
a picture or a musical piece
CD. Each track is assigned
on a
a
video CD
track
number,
you to locate the track you want.
video CD with PBC
(Playback control) functions,
moving pictures and still pictures are divided into sections called "Scenes". Each scene available is displayed
on the Scene menu and assigned a scene number,
enabling you to locate the scene you want.
A scene may be composed of one or several tracks.
a
Types
There
of video CDs
About the disc
are
two
equipped with PBC (Version 2.0)
(Playback control) functions allow you to interact
with the
system via
tion still
pictures
menus, search
functions, or other
typical computer-like operations. Moreover, high resolucan
be
played
if
they
are
included
on
screen
for instructions
symbols
one
of the
to those discs
applicable only
symbol.
are
following symbols
represented by the
Many functions of this recorder are dependent on the
recording mode. One or more of the symbols
VR
+R
+RW ) appear by each
Video
(,
function explained in this manual so that you can see
a glance whether it's relevant for the disc loaded.
,
,
DVD-R/RW with Video
VR
DVD-RW with VR
+R
DVD+R disc
+RW
DVD+RW disc
DVD
DVD-Video disc
VCD
Video CDs
CD
Audio CDs
recording
recording
at
mode
mode
MP3 CDs
JPEG
types of video CDs:
during operation.
explained in this owner's
that specific disc.
on
A section whose title has
MP3
Video CDs
PBC
may appear on the TV
This icon means the function
Video
Scene
On
"
manual is not available
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number to
enable you to locate the chapter you want. Depending
on the disc, chapters may not be labeled.
Track
symbol display
feature content
music album.
or
Symbols
JPEG CDs
DivX
DivX CDs
VHS
VHS
M/C
Memory
Tape.
Card
The finalized DVD disc is
as
DVD-Video disc
the disc.
Video CDs not
equipped
with PBC
(Version 1.1)
Operated in the same way as audio CDs, these discs
allow playback of video pictures as well as sound, but
they are not equipped with PBC.
6
DivX
DivX is the
name
which is based
on
of
a
the
revolutionary
new
MPEG-4
dard for video.You will be able to
using
this recorder.
new
video codec
compression stanplay DivX movies
Overview
(Continued)
Is
About DVD-R and DVD-RW disc
editing
a
DVD like
editing
a
video
tape?
The essential difference between DVD-R and DVD-RW
No. When you edit a video tape you need one video
deck to play the original tape and another to record the
is that DVD-R is
edits. With
How
is
a
are
DVD-R and DVD-RW discs different?
a
record-once
medium,
while DVD-RW
re-recordable/erasable medium. You
erase a
DVD-RW disc
approximately
can
re-record/
1,000 times.
Can I
play my recordable discs in a regular DVD
player?
Generally, DVD-R discs and DVD-RW discs recorded in
Video mode are playable in a regular DVD player, but
they must be 'finalized' first. This process fixes the con-
play and when to play it.
plays the disc according to
to
About word
?
?
DVD-RW discs recorded in VR
are
playable
in
some
Video
are
There
are
mode
feature that is capaDVD-RW discs recorded with
a
product
playing
Recording
format.
DVD-R
recording
Playlist:
disc
content refers to the edited version of the
how the
---
or
Video mode
can
Original
content is to be
played.
About DVD+R and DVD+RW disc
How
are
DVD+R and DVD+RW discs different?
are
always
using this
When recording
re-record/
modes available
disc, recordings
DVD-RW discs
recorded
the disc.
DVD+RW is
recorder: VR mode and Video mode.
a
actually
The essential difference between DVD+R and DVD+RW
'recording modes'?
two
'Playlist'
content refers to what's
Original:
is that DVD+R is
What
and
players.
This indicates
ble of
(Video Recording)
the
the edited version.
on
DVD-Video discs.
as
'Original'
On
'Playlist' of what
playback, the recorder
Playlist.
a
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
tents of the disc to make them readable to other DVD
players
DVD, you edit by making
to
a
a
record-once
medium, while
re-recordable/erasable medium. You
erase a
DVD+RW disc
can
approximately 1,000
times.
in Video mode.
be formatted for VR mode
recording
recording.
VR mode
recording
?4different picture quality/recording time settings
able (XP, SP, LP, EP)
Not playable on regular DVD players
Recordings can be extensively edited
DVD+RW mode
recording
?4different picture quality/recording time settings available (XP, SP, LP, EP)
Playable on regular DVD players
The edited contents is playable on regular DVD players only after finalizing
Recordings can be edited the title/chapter
?
avail-
?
?
?
?
Video mode
recording
?4different picture quality/recording time settings available (XP, SP, LP, EP)
Playable on regular DVD players (after finalizing)
Limited editing features
?
?
DVD+R mode
recording
?4different picture quality/recording time settings available (XP, SP, LP, EP)
Playable on regular DVD players (after finalizing)
Any edited contents are not be compatible on regular
DVD players. (Hide, chapter combine, added chapter
mark, etc.)
Limited title/chapter editing features
?
?
?
ote
DVD-Video Format
(Video mode)
is
a new
format for
recording on DVD-R/RW and DVD+R/RW discs that
was approved by the DVD Forum in 2000. You may
therefore experience problems playing recordable DVD
discs in some players. Symptoms include video artifacts, audio and/or video dropouts and playback suddenly stopping.
Our company cannot take responsibility for problems
playing discs recorded on this recorder in other players.
DVD +R
(Double Layer)
Double layer recording technology offers two recordable
layers on a single DVD disc, providing nearly double the
capacity of 4.7GB single layer DVDs. The greatest,
most valuable benefit of double layer recording technology is increased capacity. Storage space is nearly doubled with double layer DVD+R media, allowing consumers to burn up to 8.5GB of video on a single
DVD+R disc.
7
INTRODUC
Overview
About DVD
(Continued)
Notes for
recording
?
The
This
This recorder cannot make
?
recordings
on
CD-R
or
CD-RW discs.
Our company takes no responsibility for recording failure due to power cuts, defective discs, or damage to
?
the recorder.
?
Fingerprints and small scratches on a disc can affect
playback and/or recording performance. Please take
?
proper
?
of your discs.
care
uses
means
are
not exact because the
variable bit-rate video
that the exact
compression.
recording time will depend
being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the recording times may be shorter.
If you record still pictures or audio only, the recording
time may be longer.
The displayed times for recording and time remaining
may not always add up to exactly the length of the
on
?
times shown
recording
recorder
otes
recording
the material
disc.
Disc types and
and settings
recording formats, modes,
?
?
This recorder
can
pre-recorded
DVD-Video
play
five different kinds of DVD disc:
discs, DVD-RW, DVD-R,
DVD+RW and DVD+R discs. The disc format for DVD-R
discs is
always
"Video format"---the
ed DVD-Video discs. This
you
can
play
a
DVD-R in
means
a
same as
that
regular
once
pre-record-
finalized,
on
recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 27
(Initialize) for how to do this.
When using a DVD-R disc, you can keep recording
until the disc is
DVD
player.
Video Recording
By default, the DVD-RW disc format is
format, though you can change this to Video format, if
required. (Reinitializing the disc will erase the contents
of the disc.)
The recording mode is closely related to the disc format. If the disc format is Video Recording format, then
the recording mode is VR mode; if the disc format is
Video mode, then the recording mode is Video mode
(except for DVD-Video, which is not recordable, and so
does not have a recording mode).
Within the recording modes (which are fixed for the
whole disc) are the record settings. These can be
changed as required for each recording and determine
the picture quality and how much space the recording
will take up
?
The
until you finalize the disc.
recording session, check the
full,
or
Before you start a
amount of recording time left
?
When
using
time available will
?
?
the disc.
DVD-RW disc in Video
a
title recorded
on
on
increase if you
the disc.
The Erase Title
only
option
mode, recording
erase
the last
in the Title
List-Original menu
only hides the title, it does not actually erase the title
from the disc and increase the recording time available (except for the last recorded title on a DVD-RW
disc in Video mode).
The overwrite recording is available with DVD+RW
disc.
the disc.
Disc type
Disc format
Recording
DVD-Video
Video format
n/a
Playback only
DVD-RW
Video
Recording
format (default)
VR mode
Playback, recording, Original/Playlist editing
Video format
Video mode
Playback,
limited
recording,
limited
editing
DVD-R
Video format
Video mode
Playback,
limited
recording,
limited
editing
DVD+RW
+RW Video format
DVD+RW
Playback,
limited
recording, Title/Chapter editing
DVD+R
+R Video format
DVD+R
Playback,
limited
recording,
8
mode
Functions
limited
Title/Chapter editing
Overview
Recording
(Continued)
TV audio channels
Cards
This recorder can record either NICAM or regular audio.
If the NICAM setting (page 21) is set to Auto, then if the
broadcast is NICAM, you can record the NICAM audio.
If the broadcast is non-NICAM, the regular audio is
always recorded.
of
capable
and
displaying
saving
SmartMedia Card
(SMC)
Compact Flash Card (CFC)
?M icro Drive (MD)
Secure Digital Card (SD)
Multi Media Card (MMC)
Memory Stick (MS)
Memory Stick Pro (MS-Pro)
xD-Picture Card (xD)
Compatible with: FAT 12, FAT 16, or FAT 32
Only use the memory cards recommended above.
?
?
?
Restrictions
on
video
recording
?You cannot record copy-protected video using this
recorder. Copy-protected video includes DVD-Video
discs and some satellite broadcasts. If copy-protected
material is encountered during a recording, recording
will pause or stop automatically and
will be displayed on-screen.
an error
message
?V ideo that is 'copy-once only' can only be recorded
using a DVD-RW disc in VR mode with CPRM (see
?
?
?
?
-
-
Write Protect
Regarding
below).
For cards that have
NTSC format signals from the analog or the DV
inputs is not recorded correctly with this recorder.
is
?V ideo
tuner
in SECAM format
from the analog inputs)
signals
or
INTRODUC
?
the built-in TV
recorded in PAL
on
it will not be
a
write
possible
protect switch, if the switch
to write
or erase
the contents
of the card.
(from
are
format.
Inserting
the
Memory Card
What is 'CPRM'?
CPRM is
protection system (with scramble system) only allowing the recording of 'copy once' broada
copy
cast programs. CPRM stands for Content Protection for
Recordable Media.
This recorder is CPRM
compatible,
which
means
that
record copy-once broadcast programs, but you
cannot then make a copy of those recordings. CPRM
you
can
be made on DVD-RW discs formatted in VR mode, and CPRM recordings can only be
played on players that are specifically compatible with
recordings
can
only
Inserting the card.
Insert straight-in until
it fits into
place.
CPRM.
Copyright
?
?
otes
should be used
for lawful
Recording equipment
only
copying and you are advised to check carefully what
is lawful copying in the country in which you are making a copy. Copying of copyright material such as
films or music is unlawful unless permitted by a legal
exception or consented to by the rights owner.
This product incorporates copyright protection technology that is protected by method claims of certain
U.S. patents and other intellectual property rights
owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology
must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision corporation. Reverse engineering or disassembly is pro-
?
the memory card out of reach of children. If
swallowed, seek medical advice immediately.
?
This Recorder
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
?
'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS MODEL 625p RECORDER,
PLEASE CONTACT OUR CUSTOMER SERVICE
CENTER.
not format
a
memory card.
Do not
the card in
remove
operation (copying, writing,
Should you do so, the unit may
the card may be damaged.
playing back, etc.).
malfunction
?
or
Do not insert
ing
the CF
Using
extract the smart card when
(Compact Flash)
Photo
Insert
or
or
Music
menu
for
Memory Card
memory card recorded with JPEG
MP3/WMA file.
2.
Press MEMORY
a
on
You
can
menu
5.
menu
appears
on
the
Press ENTER.
The Photo
4.
or
the Remote Control.
The memory card slot choice
TV screen.
3.
access-
card.
1.
PROBLEMS, IT IS RECOMMENDED THAT THE
USER SWITCH THE CONNECTION TO THE
can
Caution
hibited.
?
Keep
or
Music
menu
appears
select between the Music
using
TITLE button
on
on
the TV
menu
screen.
and Photo
the Remote Control.
Press RETURN to exit the Photo
or
Music
menu
for
memory card.
9
Overview
(Continued)
Storing
Precautions
After
the unit
Handling
When
shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packaged at the factory.
When
setting up the unit
The picture and sound of a
nearby TV, VCR, or radio
during playback. In this case, position
may be distorted
the unit away from the TV, VCR,
unit after removing the disc.
To
keep
Do not
near
radio,
or
turn off the
or
use
volatile
such
liquids,
leave marks
as
on
a
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center outward.
soft cloth
Do not
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents such
as
use
spray intended for older
these
as
might damage
alcohol,
the surface
of the unit.
To obtain
No
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
lightly
solution. Do not
or
Yes
the surface.
soft, dry cloth. If the surfaces
Remote Control
a
clear
a
picture
high-tech, precision
device. If the
Battery
sensor
and press
on
Handling
battery
the remote
control, and insert
cover on
(size AAA) batteries
aligned correctly.
with
the
rear
of
two R03
and
Caution
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
Discs
discs
Do not touch the
the
Installation
Detach the
Do not mix old and
by
Operation Range
Point the remote control at the remote
Remote Control
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
disc
records.
vinyl
the buttons.
The Recorder is
Notes
temperature
discs
Cleaning
plastic products in
long period of time. They will
To clean the cabinet
benzine,
case.
there may be a considerable
increase inside the car.
light,
or
the unit
Cleaning
use a
store the disc in its
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sun-
insecticide spray,
as
the unit. Do not leave rubber
a
playing,
the surface clean
contact with the unit for
Use
discs
playback
edges so that fingerprints
surface. Do not stick paper
Reset the Recorder
side of the disc. Hold the
or
tape
on
will not
get
the disc.
on
the
If you observe any of the
following symptoms...
The front
The
...you
panel display is not working.
Recorder is not operating normally.
can
reset the Recorder
as
follows:
Press and hold the POWER button for at least five
seconds. This will force the unit to power off.
Press the POWER button again to turn the unit back
on.
the power
and then plug it in
Unplug
10
cord, wait
again.
at least five
seconds,
Front Panel
POWER
Switches the Recorder ON
AV3 IN
(VIDEO
or
OFF.
Ejects
IN/AUDIO IN
EJECT (Z)
the tape in the VCR deck.
(Left/Right))
Connect the audio/video
output of an external source
(Audio system, TV/ Monitor, VCR, Camcorder, etc.).
INTRODUC
STOP
Stops playback
or
(x)
recording.
PLAY
Starts
AV3 IN
(N)
playback.
(S-VIDEO IN)
Connect the S-Video
output of
external source (TV/ Monitor,
VCR, Camcorder, etc.).
an
REC
Starts
OPEN/CLOSE
Opens
or
(Z)
(z)
recording. Press repeatedly
to set the recording time.
close
the disc
tray.
Cassette
Compartment (VCR deck)
Insert
a
video cassette here.
DVD Indicator
DV INPUT
Connect the DV
output of
a
digital
camcorder.
Power indicator
up red when
the recorder is in
Lights
Display
window
Shows the current status of
the Recorder.
mode.
standby
Remote Sensor
Point the Recorder
Disc
Insert
a
Tray
remote control here.
disc here.
VCR Indicator
MEMORY CARD Slot
Insert
a
memory card
(CF, MD, SMC, MMC, SD, MS,
MS-Pro or xD).
DVD/VCR
Toggles
control between the DVD
deck and the VCR deck.
PROG.
(v / V)
through
Scans up or down
memorized channels.
DUB
Press to copy DVD to VCR
(or VCR to DVD).
11
Function
Display
Window
Disc type indicators
Indicates the type of disc loaded.
Indicates when the recorder
is in timer
recording or a timer
recording is programmed.
REC The recorder is
recording.
PRG
Programmed playback
TTL
active
Indicates current title.
A disc is inserted in the DVD deck.
A VHS
tape is inserted in the VCR deck.
Indicates
a
DVD-RW disc
(VR
mode
only)
is inserted in the
DVD deck.
TV
Indicates when the recorder is in TV tuner mode.
CHP/TRK
DVD
PRG TTL
REC
VR
TV
CHP TRK
Indicates current
chapter
Hi-Fi
ST
DUB
or
track number
BIL
NICAM
SVCD
M.CARD
AB
REPEAT
Indicates
repeat mode.
M.CARD
Indicates when
Memory
Card is activated.
Character indicators
Indicates
clock, total playing time, elapsed time, remaining
time, title number, chapter/track number, channel, etc.
DUB
Indicates that
a
DVD to VCR
(or
VCR to
DVD)
copy is in progress.
Hi-Fi
Indicates when the Recorder is
a
ST
Indicates
playing
tape in Hi-Fi.
a
stereo broadcast is
being
BIL
Indicates when
NICAM
12
a
received.
BILINGUAL broadcast is
Indicates when
a
being
received.
NICAM broadcast is
being
received.
Remote Control Overview
EJECT, OPEN/CLOSE
POWER
Switches the recorder ON
OFF.
or
-
DVD
-
TV Control Buttons
Select the Recorder's function mode to
DVD.
(See
VOL +/--:
for
input
recording
(Tuner, AV1-3, or DV IN).
-
-
in
options
a menu.
Press to copy DVD to VCR
(or
VCR to
DVD).
AUDIO
Selects
an
audio
language (DVD)
or an
audio channel
(CD).
SUBTITLE
Selects
a
subtitle
language.
ZOOM
Enlarges
DVD video
image.
CLEAR
Removes
-
track number
a
List
Program
or a
mark
Marker Search
-
Reset
tape
recording.
zero.
(z)
mode:
or
menu.
CHP. ADD
Inserts
chapter
recording a VR
a
PAUSE/STEP
playing/
mode DVD-RW (and
DVD+RW/+R) disc.
point during playback.
SEARCH
Displays
N
Accesses the Photo
playback.
STOP
(x)
Stops playback
or
recording.
or
menu
for
memory card.
menu on a
Playlist
Selects
DVD
disc, Title List
menu.
b / B / v / V
an
(left/right/up/down)
in the
option
menu.
PR/TRK(+/-)
-
-
-
Select channel programme of the recorder.
To
adjust tracking.
To control vertical tremble
during picture
still.
ENTER
-
-
Acknowledges menu selection.
Displays information while viewing
a
TV program.
SETUP
Accesses
or removes
the
Setup
menu.
DISPLAY
Accesses On-Screen
RETURN
-
(or Music)
(X)
(PLAY)
Starts
menu.
MEMORY
or
playback temporarily / press
repeatedly for frame-by-frame
playback.
-
Marker Search
track. Returns to
or
Pause
marker when
MARKER
Marks any
chapter
beginning of current chapter or track
go to previous chapter or track.
EP.
TIMER REC
Timer Record
Go to next
Accesses
REC MODE
Displays
DUBBING
the
repeatedly to set
the recording time.
XP, SP, LP,
SKIP(./>)
on
counter to
recording
reverse
DISC MENU / LIST
Press
Selects the
mode, for fast
the
menu.
forward.
tape during the
on
REC
Starts
VCR: Rewinds the
or
(m/M)
search.
the disc's Title menu, if
available.
DUBBING
TV's volume.
picture
search and Advances the tape during
the STOP mode, fast forward picture
TITLE
Displays
Adjusts
DVD: Search backward
STOP
0-9 numerical buttons
Selects numbered
source.
BACKWARD / FORWARD
AV
Changes
off.
on or
PR +/--: Selects TV's channel.
VCR.
use
64)
AV: Selects the TV's
Select the Recorder's function mode to
to
page
POWER: Turns the TV
VCR
the
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
Display.
(O)
Removes the menu.
Displays the menu of
a
video CD
with PBC.
PLAY MODE
Accesses the
play mode
(Repeat, Random).
function
A-B
Repeat
sequence.
THUMBNAIL
Selects
thumbnail
picture
current title and chapter for
Original and Playlist menu.
a
for the
use
in the
TV/VCR
To view channels selected
recorder tuner
or
by
by
the
the TV tuner.
13
INTRODUC
Rear Panel
AERIAL
Connect the aerial to this terminal.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
Connect to
a
TV with Y Pb Pr
(Y
Pb
Pr)
inputs.
AUDIO OUT
AC Power Cord
Plug
into the power
(Left/Right)
an amplifier, receiver
Connect to
source.
or
stereo
system.
EURO AV 2 DECODER
Connect the audio/video
output of an external
(Pay-TV decoder, Set Top Box, VCR, etc.).
source
AERIAL
RF.OUT
EURO AV 1 AUDIO/VIDEO
Connect to
a
TV with SCART
jack.
COAXIAL
Connect
(Digital audio out jack)
to digital (coaxial) audio equipment.
OPTICAL
Connect
(Digital audio out jack)
to digital (optical) audio equipment.
VIDEO OUTPUT Switch
Select either COMPONENT/PROGRESSIVE SCAN VIDEO OUT
nal of EURO AV1 AUDIO/ VIDEO terminal
depending
on
the Recorder to the TV.
S-VIDEO OUT
Connect to
a
S-Video
Input
on
TV.
RF. OUT
Passes the
Important
signal
from the AERIAL to your TV/monitor
Note
1
About Ferrite Core
Be
sure
to attach the ferrite
connecting
to this
This ferrite
core can
to the power cord
core
(for
unit).
[a]
reduce noises.
1
Push the
2
Wind the power cord twice
3
Close the ferrite
stopper [a] of the ferrite
core
on
core
ferrite
2
to open.
core.
until it clicks.
Caution
Do not touch the inner
panel. Electrostatic
damage to the unit.
14
pins of the jacks on the rear
discharge may cause permanent
or
RGB
sig-
how you connect
Connections
ips
Depending
your TV and other equipment you wish
to connect, there are various ways you could connect
the recorder. Use only one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
--
--
--
Video connection
Component
on
Caution
Make sure the Recorder is connected directly to the
TV. Tune the TV to the correct video input channel.
Do not connect the Recorder's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
Do not connect your Recorder via your VCR. The
DVD image could be distorted by the copy protection
system.
Connecting
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
jacks on the Recorder
ding input jacks on the TV using an
(C).
connection
If your television is a high-definition or "digital ready" television, you may take advantage of the recorder's pro-
gressive scan output for the highest video resolution
possible. If your TV does not accept the Progressive
Scan format, the picture will appear scrambled if you try
Progressive Scan on the recorder.
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
jacks on the Recorder
ding input jacks on the TV using an
to the correspon-
Y Pb Pr cable
(C).
otes
--
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder. Plug one end of the aerial cable into the TV
socket on the recorder and the other end into the aerial
input socket on your TV set.
--
RF coaxial connection
Connect the RF. OUT jack on the Recorder to the aerial
input jack on the TV using the 75-ohm Coaxial Cable
supplied (R). The RF. OUT jack passes the signal
through from the AERIAL jack.
Set the
Progressive to "ON" on the setup menu for
progressive signal, see page 23.
Set the progressive to "Off" by removing any disc
from the unit and close the disc
Progressive
scan
connections
or
Audio
AUDIO INPUT
L
releasing it.
analog video
S-VIDEO connection.
(Left/Right) Connection
right
AUDIO OUT
Recorder to the audio left and
right
IN
jacks of
jacks on
the
the TV
the audio cables
Recorder's AUDIO
SCART INPUT
does not work with the
Connect the left and
using
Rear of TV
tray. Then press
STOP and hold it for five seconds before
--
ANTENNA
INPUT
Y Pb Pr cable
Progressive Scan (ColorStream Pro)
to the Aerial
Aerial
to the correspon-
(A). Do not connect the
OUT jack to the phono in jack
(record deck) of your audio system.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to OFF.
VIDEO
INPUT
R
R
Rear of TV
AERIAL
SCART INPUT
S-VIDEO
VIDEO
INPUT
INPUT
COMPONENT VIDEO/
PROGRESSIVE SCAN INPUT
Y
Pb
Pr
AUDIO INPUT
L
R
RF.OUT
Rear of Recorder
Connections to Your TV
Make one of the following connections, depending
the capabilities of your existing equipment.
S
C
AT
on
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set the VIDEO OUTPUT
switch to COMPONENT. When using the SCART
jack, set the VIDEO OUTPUT switch to RGB.
SCART connection
Connect the EURO AV1 AUDIO/VIDEO scart jack on
the Recorder to the corresponding in jacks on the TV
using the scart cable (T).
S-Video connection
Connect the S-VIDEO OUT jack on the Recorder to the
S-Video in jack on the TV using the S-Video cable (S).
Rear of Recorder
15
HOKUP
Connections
(Continued)
to a cable box or
Connecting
Connecting
satellite receiver
If you have
decoder,
shown
a
cable
or
satellite receiver with
a
built-in
If you have an external, dedicated decoder box for your
satellite or cable TV system, use the setup described on
as
this page. If you are using a separate
decoder box for your cable/satellite TV, set up following
on
right.
?
setup
on
Connect RF cables
1
as
this page.
Connect the cable from the aerial/cable TV outlet to
1
this page you can:
Record any channel by selecting it on the cable
box/satellite tuner.
Using
the
the
on
the aerial
2
shown.
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
on
3
a
SCART cable to connect the EURO AV2
DECODER connector to
a
SCART AV connector
on
your satellite/cable box.
This enables you to record scrambled TV channels.
on
your cable/satellite tuner.
SCART cable to connect your decoder to
your cable/satellite tuner.
See the manual for your decoder box for more
a
Use
a
SCART cable to connect the EURO AV2
DECODER connector to
SCART AV connector
a
on
your satellite/cable box.
your TV.
Use
3
SCART AV connector
a
Use
input
detailed instructions.
This enables you to watch and record TV channels.
2
external
decoder box
connect it to this recorder and your TV
the instructions
an
4
Use the SCART cable to connect the EURO AV1
AUDIO/VIDEO connector to
on
a
SCART AV connector
your TV.
Caution:
ip
This recorder has
a
'loop through'
function. This feature
allows you to record a TV program from the built-in TV
tuner in this recorder, while watching a satellite or cable
channel. Press TV/VCR to select the TV mode
recording.
during
The TV indicator appears.
Do not connect your decoder box
recorder.
Information from the decoder
pay TV services), is
is off (in standby).
For timer
recording
only
directly
to this
to
(for example, relating
viewable when this recorder
to work
properly
on
this
recorder,
the satellite/cable box must also be switched
on
dur-
ing recording.
Caution:
Do not connect this recorder
lite receiver
nent
directly
or
cable box.
to your TV
'through' your VCR, satelAlways connect each compo-
or
AV receiver.
Decoder
Aerial/
SCART AV
Cable TV
Wall Jack
Aerial/Cable TV
Wall Jack
Cable Box
or
Cable Box
Satellite Receiver
or
Satellite Receiver
AERIAL
INPUT
AERIAL
OUTPUT
SCART AV1
SCART AV2
AL
AERIAL
OUTPUT
SCART AV1
SCART AV2
AL
RF.OUT
RF.OUT
Rear of Recorder
16
AERIAL
INPUT
Rear of Recorder
Connections
Connecting
(Continued)
to an
Amplifier
Rear of Recorder
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
Connect the Left and
jacks on the
Recorder to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Right
AUDIO OUT
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2, or DTS)
Connect
1
one
HOKUP
X
O
A
of the Recorder's DIGITAL AUDIO
OUT
jacks (OPTICAL O or COAXIAL X) to the corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.
You will need to activate the recorder's
2 put. (See
"AUDIO"
on
page
digital
OPTICAL
COAXIAL
DIGITAL INPUT
DIGITAL INPUT
L
R
AUDIO INPUT
out-
Amplifier (Receiver)
24).
Multi-channel sound
Digital
A
digital multi-channel
sound quality. For this
connection
provides
the best
you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats
supported by your Recorder
(MPEG 2, Dolby Digital and DTS). Check the receiver
manual and the logos on the front of the receiver.
Caution:
Due to the DTS
will be in DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
selected.
otes
--
If the audio format of the
digital output
does not match
the
--
capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
--To
see
on-
press AUDIO.
This recorder does not perform internal
screen
--
the audio format of the current DVD in the
display,
decoding
of
a
DTS sound track. To
multi channel
surround, you
recorder to
DTS
recorder's
a
digital
must connect this
compatible
audio
(2 channel)
enjoy DTS
receiver via
one
of this
outputs.
17
Connections
Accessory
(Continued)
Audio/Video
(A/V)
Connections to Recorder
Connect the
audio/video
using
input jacks (AV3) on the Recorder to the
out jacks on your accessory component,
audio/video cables.
Connecting
panel DV IN jack, it is possible to
connect a DV digital camcorder or video deck or
DVD-R/RW recorder and digitally transfer DV tapes
Using
If you use the S-VIDEO IN jack on the front panel, the
VIDEO IN jack on the front panel is not available.
the front
or
DVD-R/RW discs to DVD-R/RW.
Use
ote
Digital Camcorder
a
a
DV cable
(not supplied)
to connect the DV in/out
of your DV camcorder/video deck to the front
DV IN jack of this recorder.
jack
panel
ote
This
jack is for
compatible
connection to DV
not
with
digital
equipment only.
satellite tuners
or
D-VHS
video decks.
S-VIDEO
OUTPUT
AUDIO
OUTPUT
R
DV
OR
Digital
DV
IN/OUT
L
VIDEO
OUTPUT
Front of Recorder
Front of Recorder
18
It is
Camcorder
Before
Initial
In this
Operation
GENERAL
Settings
system, there
menu
several ways to cusMost menus consist of
Auto
are
tomize the
settings provided.
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu system will appear
on
the TV
to
help
see
"B"
The third level
can
be
B. For
displayed by pressing
els, you will
screen.
the
on
navigating the menu levright side of the menu label
Programming
This Recorder is
Connect the Recorder to the desired
type of aerial,
shown in
page 15.
to the Aerial
Connecting
on
HOKUP
as
you go to the next level.
Programming
Program
up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
TV
VCR
Play Aspect
VCR
Play System
Progressive Scan
1
Operation
2
Press SETUP.
Setup
menu
appears.
option.
The
Setup
menu
appears.
Use v / V to select the GENERAL
selected, press B
is selected, press B
to the second level.
to
Press B to
"Start" icon is
Use v / V to select the second desired
move
3
4 option.
5
6
option.
to the third level.
option.
option
Use v / V to select the Auto
to the second level.
Press B to
Press SETUP.
to move
While the desired item is
move
Set
While the GENERAL
Use v / V to select the desired
3
4
5
6 press
11%
AV2 Connection
To go back to the previous level:
Press b on the remote control.
The
Edit
Aspect
Factory
General
Stop
Clock Set
To go to the next level:
Press B on the remote control.
2
99 TV
Preparation:
bring
1
of
frequency
receiving up to
a
channels.
Auto
To
with
equipped
synthesized tuner capable
move
Programming
to the third level.
highlighted.
Press ENTER to
begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them
in
the tuner's memory.
Use v / V to select the desired
setting
then
ENTER to confirm your selection.
Some items require additional steps.
7
Press SETUP to exit the
Setup
menu.
19
Before
Operation (Continued)
Program
Edit
You
a
can
move,
edit
channel
manually (add, delete,
Program
name,
You
etc.).
a
search to select and store TV chan-
Programming
Edit
Program
1. Use v / V to select
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
Edit
Clock Set
TV
perform
manually.
can
nels
Auto
Edit
Aspect
VCR
Play Aspect
VCR
Play System
AV2 Connection
Progressive
Factory
List
Program
menu.
2. Use v / V to select
Scan
a
'Program
Edit'
option
from the
options then press ENTER.
Program Edit menu appears.
Set
Press SETUP.
1
Setup
appears.
Use
select the GENERAL option.
2
the GENERAL option is selected, press
3
the second
Use
select the Program Edit option then
4 press
the third
The
menu
PR
Seek
Ch.
MFT
C07
0
v / V to
While
level.
v / V to
B to
"Edit" icon is
move
level.
to
highlighted.
5 Program
List
menu
appears.
PR
Ch.
MFT
Station
01
C12
+10
AAA
02
C23
0
BBB
03
C7
0
CCC
04
C27
-10
DDD
(left/right):
05
C17
0
06
C33
0
07
C34
+20
08
C47
0
09
C10
-60
Seek: Searches
Moves the
Move
Searching stops
Program
Edit
cursor
to the
previous
or
Program
options
menu display.
Ch.:
to
Use v / V to select
appears
an
on
Close
the left side of the
then press ENTER
option
to confirm.
Edit
Program
Edit: Edits the select-
Station Rename
ed program.
Move
Station Rename: Edits the station
Delete
Decoder On/Off
NICAM Auto/Off
name.
Move: Moves the
location
on
program's
the program list.
Delete: Deletes the program
from program list.
Decoder On/Off: Set the
decoder for the program to On
or Off.
NICAM Auto/Off: Set the
NICAM function to for the program Auto or Off.
Press RETURN
the
setting
at the current
(display only)
station
automatically. Use
option then press v / V.
when the recorder tunes in
a
station.
Page Up/Down
List
a
b / B to select Seek
ENTER.
20
use
menu.
PR: Indicates program number
6Usev/VtoselectaPRnumberthenpress
menu.
below to
(up/down): Changes
cursor position.
11
List
on
v / V
10
8
descriptions
next column.
PR-01
Select
3. See the
b / B
Press ENTER.
Program
OK
B
to move to
7
07
(O) repeatedly
to exit
Program
Changes the channel number to
select Ch. option then press v / V.
edit. Use b / B
MFT:
Changes the frequency for fine tuning.
Useb/BtoselectMFToptionthenpressv/V.
4. Choose OK then press ENTER to confirm the
and returns to the Program List menu.
setting
Before
Operation (Continued)
Edit
Program
Sort TV channels
(Continued)
You
Station Rename
You
up to 5 characters
independently.
Names
be
can
long.
1. Use v / V to select
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
List
Program
sort the
program's position
a
menu.
1. Use v / V to select
Program List options then
Keyboard menu appears.
Program
Language
option
from
press ENTER.
ABCDE
FGH
I
0
OK
option
desired
a
can
a
J
for the station. Use vVbBto select
to lower
?
case
Symbol:
Switches the
keyboard
characters.
Lowercase: Switches the
English/Latin
keyboard
characters.
Switches the
keyboard
to
symbol
char-
acters.
?
delete
a
program
on
the
?
space at the cursor position.
Delete: Deletes the previous character at the
cursor
Inserts
a
List
menu.
List
a
menu.
options
Setting
then press ENTER.
option from Program List
The Program is deleted.
the Decoder On/Off
1. Use v / V to select the program you wish to link with
the decoder function on the Program List menu then
press ENTER.
Program List options appears
Program List menu.
on
the left side of the
Program
select
List
On,
option
from
then press ENTER. If you
'Decoder' appears on the menu screen.
options
position.
?
b / B: Moves
?
OK: Select to finish.
?
Program
2. Use v / V to select 'Decoder On/Off'
Space:
then press
Cancel
character then press ENTER to confirm your selection.
?
position
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
a
case
List
Program
program
2. Use v / V to select 'Delete'
English/Latin Capital:
from
then press ENTER.
Program
Delete
menu.
1. Use v / V to select
UVWXYZ
Space
List
3. Use v / V to select
You
KLMNOPQRST
upper
List
ENTER to store.
English/Latin Capital
123456789
?
Program
a
2. Use v / V to select 'Move'
Deleting
a name
the
program on the Program List
menu then press ENTER.
Program List options appears on the left side of the
options
2. Use v / V to select 'Station Rename'
3. Enter
on
menu.
stations
can name
can
manually
cursor
to left
Cancel: Select to exit the
or
right.
Setting
the NICAM Auto/Off
This DVD recorder
menu.
4. Choose 'OK' icon then press ENTER to fix the
and returns to the Program List menu.
can
sions in NICAM Stereo.
name
receive Hi-Fi sound transmis-
However, if sound distortion
occurs, due to poor reception, you can switch Off
1. Use v / V to select a program on the Program List
then press ENTER.
Program List options appears
menu
Program
List
on
the left side of the
menu.
2. Use v / V to select 'NICAM Auto/Off'
Program
select
List
Auto,
option
from
then press ENTER. If you
'NICAM' appears on the menu screen.
options
21
HOKUP
Before
Operation (Continued)
Clock Set
TV
Aspect
To record
Auto
the correct
Programming
Program
Edit
Clock Set
TV
Date
Aspect
VCR
VCR
Year
--
/
format programme
screen
type of wide
screen
Time
signal
successfully
must be broad-
the TV station.
cast
by
You
can
choose:
----
4:3 Letter Box: Select when
Play System
--
:
a
standard 4:3 TV is
con-
--
nected.
AV2 Connection
Factory
wide
--
Play Aspect
Progressive
a
Displays
theatrical
images
picture.
above and below the
Scan
4:3 Pan Scan: Select when
Set
a
with
masking
standard 4:3 TV is
bars
con-
nected. The video material formatted in the Pan & Scan
style
1
2
3
4
5
6
ture
Press SETUP.
The
Setup
menu
played back
are cut off).
in that
16:9 Wide: Select when
appears.
Use v / V to select the GENERAL
Auto
While the GENERAL
to
move
option is selected, press B
to the second level.
Use v / V to select the Clock Set
style (Both
sides of the
pic-
16:9 wide TV is connected.
a
menu.
Programming
Program
Edit
Clock Set
TV
option.
Aspect
4:3 Letter Box
VCR
Play Aspect
VCR
Play System
4:3 Pan Scan
16:9 Wide
AV2 Connection
Press B to
move
Progressive
to the third level.
Factory
Enter the necessary information for date and
time.
VCR
b / B
You
or
(left/right):
Moves the
cursor
to the
previous
(up/down): Changes
cursor position.
the
setting
at the current
Press ENTER to confirm your setting, then
press SETUP to exit the Setup menu.
:
Set
:
choose:
back Wide-Screen proWide-Screen and Normal programmes
Automatically plays
grammes
normal.
4:3
Scan
Play Aspect
can
AUTO
next column.
v / V
7
is
Only
as
for
back Normal format
playing
(4:3).
16:9:Only for playing
ings (16:9).
Programming
Program
Edit
Clock Set
Aspect
VCR
Play Aspect
Auto
VCR
Play System
4:3
AV2 Connection
Progressive
Factory
22
recordings
back Wide-Screen format record-
Auto
TV
as
Set
Scan
16:9
Before
VCR
Operation (Continued)
Play System
Factory Setting
Your video recorder uses two colour standards, PAL and
MESECAM. During play your video recorder should
select the colour system automatically, however if you
experience problems you may need to do it manually.
If you need to, you can reset the recorder to all its factory settings. Select 'SET' icon then press ENTER.
ote
Auto
Some
Programming
options
Program
can
not be reset.
Auto
Clock Set
TV
VCR
Play System
AV2 Connection
Scan
Edit
Clock Set
Play Aspect
Progressive
Programming
Program
Aspect
VCR
HOKUP
Edit
TV
Auto
PAL
MESECAM
Aspect
VCR
Play Aspect
VCR
Play System
AV2 Connection
Factory Set
Scan
Progressive
Factory Set
SET
AV2 Connection
You can connect a decoder, satellite receiver
device to the EURO AV2 socket on the back.
Auto
or
other
Programming
Program
Display Language
Edit
Clock Set
TV
Select
Aspect
VCR
Play Aspect
VCR
Play System
LANGUAGE
a
language
for the
Setup
and
menu
on-screen
display.
AV2 Connection
Decoder
Display Menu
Progressive Scan
Satellite Receiver
Disc Menu
Factory Set
Other Device
English
Disc Audio
Disc Subtitle
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to OFF.
If you are using the component video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to ON.
Disc
Select
-
Auto
Edit
-
according
select Others
language,
OFF
ON
ote
Scan will not be set when the VIDEO OUTPUT switch is set at RGB position.
Progressive
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
to the
page 62. If you make
repeatedly to delete one
on
AV2 Connection
Factory
To select another
number
Play System
Set
Others:
then press ENTER. Use the numbered
buttons to key-in the corresponding 4-digit
Play Aspect
Progressive Scan
disc is
option
Aspect
VCR
and Subtitle.
selected.
Clock Set
VCR
language for the disc's Menu, Audio,
Original: The original language set for the
a
Programming
Program
TV
Language
language
a
code list
mistake, press
by
one
b
and correct
it.
Display Menu
Original
Disc Menu
English
Disc Audio
French
Disc Subtitle
German
Italian
Purtuguese
Russian
Spanish
Others----
tray.
2)
Press STOP and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
23
Before
Operation (Continued)
AUDIO
Sampling Frequency
Each DVD disc has
variety
output options.
Audio Output according to the type
Set the recorder's
audio
of audio
system you
a
of
use.
PCM: Select when connected to
the PCM
recorded
made, this unit will automatically convert any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling
96 kHz signals, select 96 kHz. When this choice is
Dolby Digital
amplifier.
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
2-channel
a
digital
stereo
The Recorder's
digital audio outputs sounds
2ch format when you play a DVD video disc
on the Dolby Digital recording system.
in
made, this unit will pass each type of signal through
without any further
Dolby Digital
DTS
Bitstream: Select "Bitstream" if you connected the
Recorder's DIGITAL OUT jack to a Dolby Digital
decoder
(or an amplifier
Dolby Digital decoder).
or
other
equipment
with
processing.
MPEG
a
Sampling Freq.
48KHz
DRC
96KHz
Vocal
Dolby Digital
PCM
DTS
Bitstream
MPEG
Sampling Freq.
DRC
DRC
Vocal
(Dynamic Range Control)
With the DVD
DTS
OFF: If you select "OFF", the DTS
through the DIGITAL OUT jack.
signal
is not
output
Bitstream: Select "Bitstream" if you connected the
Recorder's DIGITAL OUT jack to a DTS decoder (or
amplifier
or
other
equipment
with
DTS
a
program's soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). Then, you may listen to a movie
at a lower volume without losing clarity of sound. Set
format, you
hear
can
a
DRC to ON for this effect.
an
Dolby Digital
decoder).
DTS
MPEG
Dolby Digital
Sampling Freq.
DTS
OFF
DRC
OFF
MPEG
Bitstream
Vocal
ON
Sampling Freq.
DRC
Vocal
Vocal
MPEG
Set Vocal to ON
PCM: Select when connected to
stereo
amplifier.
The Recorder's
a
2-channel
digital
audio
outputs
mix into normal stereo sound.
a
playing.
multi-channel karaoke
The karaoke channels
DVD
Dolby Digital
DTS
Bitstream: Select "Bitstream" if you connected the
Recorder's DIGITAL OUT jack to a MPEG decoder
or
other
equipment
with
a
MPEG
(or
decoder).
MPEG
Sampling Freq.
DRC
Vocal
DTS
MPEG
PCM
Sampling Freq.
Bitstream
DRC
Vocal
OFF
ON
Dolby Digital
24
a
DVD is
system.
amplifier
when
digital
sounds in the PCM 2ch format when you play
video disc recorded on the MPEG2 recording
an
only
on
the disc will
Before
Operation (Continued)
LOCK (Parental
Rating
Control)
Movies
DVDs may contain scenes not suitable for
children. Therefore, discs may contain Parental Control
Set Password
To
access
the
features, you
Set Password and Area Code
Rating,
must enter
4-digit security password.
a
The
Setup
menu
appears.
2
Use v / V to select the LOCK
3
4
5
6
While the LOCK
move
option.
Use v / V to select the Set Password
option.
to the third level.
When you have not entered a password yet;
Enter a 4-digit password using the numbered buttons to create
applies
scenes on
disc
complete
the disc. These
country-dependent.
are
alternative
or
to
rated
scenes are
The Parental Control
1
being played
played with
scenes.
Follow
steps 1-3
as
shown above to the left
(Set
Password).
2
Use v / V to select the
3
Press B to
move
personal 4-digit security password.
4-digit password again to verify.
Enter the
to the
feature allows you to prevent discs from
by your children or to have certain discs
option
move
certain
Ratings
is selected, press B to
to the second level.
Press B to
information that
from Level 1 to 8, and alternatively, more suitable
scenes are available for selection on some discs.
Press SETUP.
1
on
a
Rating option.
to the third level.
Rating
No Lim
Set Password
8(Adul
Password
7
Area Code
6
0-9
Input
5
4
Rating
Set Password
Chang
Area Code
Delete
New
3
Password
21(Kids)
0-9
Input
4
When you have already entered a password;
You can change or delete the password.
Use v / V to select
"Change"
or
"Delete" then press
tons. One
tions.
Enter
the
:
a
num-
Enter
a
bered buttons to
Eight (8)
restric-
has the least
Level 1 to 8: Some discs contain
4-digit password using the numconfirm the personal 4-digit securi-
played. Higher
unless
an
rated
ip
lower
If you
your password, to clear the current password, follow the procedure below.
forget
1. Press SETUP to
display
the
Setup
not suit-
alternative
will not be
scene
is available
If
same
played
on
rating
the disc.
or a
suitable alternative is found, playback will stop. You must enter the 4-digit password
or change the rating level in order to play the disc.
If you make a mistake, press b repeatedly to delete
password numbers one by one then correct it.
code
scenes
scenes
The alternative must have the
forget your 4-digit
restric-
able for children. If you set a rating for the recorder,
all disc scenes with the same rating or lower will be
ty password.
If you
playback
No Limit: If you select No Limit, Parental Control is
not active. The disc will play in full.
twice.
:
has the most
tions.
4-digit password using
bered buttons to confirm the personal 4-digit security password, then enter a 4-digit new password
Delete
4-digit password using the numbered
buttons to confirm the personal 4-digit security
password.
a
5Selectaratingfrom1to8usingthev/Vbut(1)
playback
ENTER.
Change
Enter
6
one.
no
Press ENTER to confirm your rating selection,
then press SETUP to exit the menu.
menu.
2. Use the Number buttons to enter the
6-digit
number
"210499".
3. Select "OK" then press ENTER. The
is cleared. Enter
a new
code
as
4-digit password
shown above.
25
HOKUP
Before
Operation (Continued)
Area Code
RECORD
Enter the code of
a
country/area
used to rate the DVD video
(See
"Area Code
whose standards
disc, referring
were
to the list
List", page 63.).
Disc Record Mode
You
picture quality for DVD recording; XP
(High Quality), SP (Standard Quality), LP (Low Quality),
EP (Extend Quality).
Rating
can
set the
Set Password
RU
Area Code
Disc Record Mode
XP
VCR Record Mode
SP
VCR Record
LP
System
DV Record Audio
Auto
1
2
3
4
5
6
EP
Chapter
Press SETUP.
The
Setup
menu
appears.
Use v / V to select the LOCK
1
option.
While the LOCK
move
option is selected, press B to
to the second level.
Use v / V to select the Area Code
Press B to
move
The
Setup
menu
appears.
Use v / V to select the RECORD
While the RECORD
option.
3
4 option.
5
6 (XP, SP,
7 press
to move
option.
is selected, press B
to the second level.
option
Use v / V to select the Disc Record Mode
to the third level.
When you have not entered a password yet;
Enter a 4-digit password using the numbered buttons to create
2
Press SETUP.
personal 4-digit security password.
Enter the 4-digit password again to verify.
When you have already entered a password;
Enter a 4-digit password using the numbered buttons to confirm the personal 4-digit security passa
Press B to
move
to the third level.
Use v / V to select
LP
or
desired Record Mode
a
EP)
Press ENTER to confirm your selection, then
SETUP to exit the menu.
word.
VCR Record Mode
ip
If you a mistake,
numbers one by
7
8
press b
one
repeatedly
to delete
password
then correct it.
Select the first character
using
the v / V
second
using B buttons and select
character using v / V buttons.
cursor
the
Press ENTER to confirm your Area Code selec-
9 tion,
26
then press SETUP to exit the
menu.
picture quality for
(Standard Play), LP (Long Play).
can
set the
VCR
Disc Record Mode
buttons.
Shift the
You
VCR Record Mode
SP
VCR Record
LP
System
DV Record Audio
Auto
Chapter
recording;
SP
Before
Operation (Continued)
VCR Record
Your video recorder
MESECAM.
DISC
System
uses
two colour
standards, PAL and
your video recorder
should select the colour system automatically, however
if you
During recording
experience problems
you may need to do it
man-
ually.
Initialize
If you load a completely blank
tialize the disc.
disc, the recorder will ini-
DVD-R: The recorder initialize the disc to Video mode.
The
mode will
recording
Disc Record Mode
DVD-RW: Go to
VCR Record Mode
DVD+R: The Initialize
VCR Record
System
be Video mode.
7.
step
menu
will appears. Select "OK"
then press ENTER.
DVD+RW: The recorder initialize the disc to DVD+RW
Auto
DV Record Audio
PAL
Auto
MESECAM
Chapter
always
mode.
Also, you
can
format the disc from the
Setup
menu as
below.
Start
Initialize
Finalize
Disc Label
DV Record Audio
Disc Protect
PBC
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
AutoPlay
About
DivX(R)
jack.
Some
digital
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
the other
is for
overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
Disc Record Mode
VCR Record Mode
VCR Record
Auto
System
DV Record Audio
Audio 1
Auto
Audio 2
Chapter
Chapter
1
Separation
menu
appears.
3
4
5
6
7
While the DISC
move
option.
is selected, press B to
to the second level.
option
Use v / V to select the Initialize
Press B to
move
Start icon is
option.
to the third level.
highlighted.
Press ENTER.
Initialize
menu
In case of
appears.
DVD-RW,
Disc Format Mode
use b
(VR
/ B to select
Mode
or
Video
a
desired
Mode)
then press ENTER.
In case of DVD+RW, go to step 8.
Initialize
None, switch off automatic
with the No
Setup
2
recording, chapter markers are put in specified
setting. You can change this interval to 5 minutes, or
chapter marking altogether
The
Use v / V to select the DISC
When
10 minutes. If you select
Press SETUP.
Select
a
mode.
setVR Mode
Video Mode
ting.
Disc Record Mode
8
VCR Record Mode
VCR Record
System
Use b / B to select "OK" then press ENTER.
It takes a few moments to format the disc.
Initialize
DV Record Audio
Auto
Chapter
None
5 Min
All data
on
the disc will be deleted.
Proceed?
OK
10 Min
Cancel
Caution
If you want to change the disc format,
recorded on the disc will be erased.
everything
27
HOKUP
Before
Operation (Continued)
Finalize
Disc Label
Finalizing 'fixes' the recordings in place so that the disc
can be played on a regular DVD player or computer
equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen for
navigating the disc. This is accessed by pressing DISC
Use this to enter
MENU / LIST
or
for the disc. This
a name
name
appears when you display disc information on-screen.
?
The disc name can be up to 32 characters long.
?
For discs formatted
only
see
a
on a
different
Recorder, you will
limited character set.
TITLE.
Initialize
Finalize
Caution
?
DVD-R, DVD-RW, and DVD+R recording,
you've finalized a disc recording, you can't edit
Disc Protect
When
record
Edit
Disc Label
else
anything
on
PBC
or
AutoPlay
that disc except
About
DivX(R)
DVD+RW.
Initialize
Finalize
Finalize
Disc Label
Follow
1
Unfinalize
Disc Protect
PBC
steps 1-3
as
shown Initialize
Use v / V to select the Disc Label
2
3
4 Keyboard
AutoPlay
About
DivX(R)
Press B to
move
Edit icon is
highlighted.
on
page 27.
option.
to the third level.
Press ENTER.
Follow
1
steps 1-3
as
shown
on
page 27
(Initialize).
Use v / V to select the Finalize
2
3
4
menu
appears.
option.
Language
Press B to
Finalize is
move
to the third level.
highlighted.
menu
5
Cancel
The recorder starts
finalizing
Enter
how much is recorded
utes
or more
on
depends
the
for the disc. Use vVbBto select
on
the
type of disc,
can
take up to 8 min-
(PLAY):
Inserts
X
(PAUSE/STEP):
cursor position.
x
(STOP),
to finalize.
at the
cursor
Numbers
ip
ding
If you load a DVD-RW that has already been finalized,
you can 'unfinalize' it by choosing Unfinalize from the
menu.
After
doing this,
you
can
edit and
space at
Deletes the after character at the
previous
character
position.
cursor
to left
or
right.
(0~9): Enters
location
on
the character of corresponthe selected column.
DISC MENU /
LIST, DISPLAY: Switches the keyboard type (English/Latin Capital, English/Latin
Lowercase, Symbol)
re-
record onto the disc.
28
a
entering a name
the cursor position.
CLEAR: Deletes the
. / >: Moves
Finalize
Cancel
Remote control buttons for
disc, and the number of
the disc. A disc recorded
OK
character then press ENTER to confirm your
selection. Refer step 3 as shown on page 21
the disc.
ote
finalization takes
a name
Delete
a
N
on
I
(Station Rename).
Select OK then press ENTER.
titles
J
Space
OK
long
ABCDEFGH
appears.
Do you want finalization?
How
0
UVWXYZ
Finalize
5
123456789
KLMNOPQRST
Press ENTER.
Finalize
English/Latin Capital
6
Choose OK then press ENTER to fix the
and return to the Setup menu.
7
Press SETUP to exit the
menu.
name
Before
Operation (Continued)
Disc Protect
When
recording
About
in DVD+RW / +R disc
matted DVD-RW
set to ON to
disc,
or
DivX(R)
VR mode for-
prevent
Initialize
accidental
Finalize
of the disc loaded. If you
need to unlock the disc to make edits, select OFF.
recording, editing
or
deleting
Disc Label
Disc Protect
PBC
Initialize
HOKUP
AutoPlay
Finalize
About
Enter
DivX(R)
Disc Label
Disc Protect
OFF
PBC
ON
AutoPlay
About
We
provide you the DivX VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX
VOD service. For more informa-
DivX(R)
tion, visit www.divx.com/vod.
PBC
Set
-
-
Playback
Control
(PBC)
ON: Video CDs with PBC
to On
or
Off.
played according to the PBC.
are played the same way as
are
OFF: Video CDs with PBC
Audio CDs.
1
2
Select "About
DivX(R)" option
then press B.
Press ENTER while Enter is selected and the
regis-
tration code will appear.
Use the
code to
registration
3 videos from DivX
purchase
or
rent the
VOD service at
Initialize
www.divx.com/vod. Follow the instructions and
Finalize
download the video onto
Disc Label
unit.
a
disc for
this
playback
on
VOD
only
Disc Protect
PBC
OFF
AutoPlay
ON
About
Auto
You
ote
All the downloaded videos from DivX
DivX(R)
be
played
back
on
can
this unit.
Play
set up the Recorder so a DVD disc automatistarts playing whenever the DVD is inserted.
can
cally
If Auto
Play
mode is set to
On, this Recorder will search
for title that has the
longest playback time
back the title automatically.
ON: Auto Play function is active.
OFF: Auto Play function is not active.
and then
play
Initialize
Finalize
Disc Label
Disc Protect
PBC
AutoPlay
OFF
About
ON
DivX(R)
ote
The Auto
Play
function may not work for
some
DVDs.
29
Before
Operation (Continued)
General
Explanation
On-Screen Display
This manual
of
Changing
If
nels
operating the
Recorder. Some DVDs require specific operation or
allow only limited operation during playback. When this
occurs, the symbol
appears on the TV screen, indicating that the operation is not permitted by the
Recorder
basic instructions for
gives
is not available
or
on
the disc.
Displaying
Information
You
various information about the disc
display
can
tape loaded
1
2
no
disc
or
using
tape is playing, you
the number
the remote
front
TV Channels
control,
Changing
TV Audio Channel
Some TV programs are broadcast with a bilingual audio
program (BIL). You can change the TV audio using the
on-screen
AUDIO button.
or
on-screen.
Press AUDIO
repeatedly
the
to
change
the TV audio
as
shown below.
Stereo/Main
display, press DISPLAY
or RETURN(O) repeatedly until it disappears.
See the descriptions on next pages for detailed
explanation during playing.
remove
the
panel.
Press DISPLAY repeatedly to display/change the
information displayed on-screen.
To
or
or
change TV chanPR/TRK (v / V) buttons on
PROG. (v / V) buttons on the
can
on-screen
Stereo/Sub
otes
Some discs may not
provide all of the features on the
on-screen display example shown on next pages.
If no button is pressed for 7 seconds, the on-screen
display disappears.
Temporary
Mono/Main
Feedback Field Icons
Resume
Action
play
from this
prohibited
or
The current audio channel is
point
not available
?
For the detailed
displayed
information, refer
on-screen.
to the
step
4
on
page 44.
Displaying
Information While
Watching
TV
the TV, press DISPLAY to display/
the information displayed on-screen.
?
If the sound is poor quality when set to Stereo, you
can often improve it by changing to Mono.
?
When
During viewing
remove
e.g., when DVD-RW in VR mode is inserted.
Indicates channel
and audio
can
number, station
input signal
name,
received by the
tuner.
Indicates the record
mode,
free space, and elapsed
time progress bar.
Indicates disc
name
and format.
DVD-RW
VR Mode
DVD
SP
1H 32M Free
PR-05
MONO
Stereo/Main
Indicates
01/01/2004 11:35
output audio signal.
Indicates current date and time.
30
an
external
be switched
input
only to
is
selected, the audio channel
Stereo.
Before
Operation (Continued)
Information
Displaying
on-screen
DVD
(Continued)
Shows the
elapsed playing
time
and total time.
Shows the current
title/chapter
number
Title
and total number of
Chapter:
titles/chapters.
Menu
1/4
3/28
0:06:32
1/6
Number
4/26
Time search
0:10:30
Audio
language
and Digital Audio
Output mode
5.1CH
1.
ENG
mode.
2:12:10
Selection Method
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
OFF
ABC
1/3
Sound
3D SUR.
the
elapsed
time
directly.
the
b/B
setting.
Shows the current subtitles language, and
changes
Angle
point by
Shows the current audio soundtrack language,
encoding method, and channel number, and
changes
language
Shows the Current
Shows the current title number and total number of
titles, and skips to the desired title number.
searches the
Subtitle
/
Function (Use v / V to select desired option)
Options
Title Number
Chapter
:
DVD
the
b/B
setting.
Shows the current angle number and total number of
angles, and changes the angle number.
b/B
Shows the current sound mode, and
changes
the
b/B
setting.
Shows the
VCD
elapsed playing
time
and total time.
Shows the current track
number and total number
of
tracks,
or
DVD
shows PBC
TRACK
:
1/17
0:06:32
On mode.
Menu
/
mode.
1:00:00
Selection Method
Function (Use v / V to select desired option)
Options
Track Number
1/4
Time
0:10:30
Audio Channel
STEREO
Sound
3D SUR.
Shows the Current
Shows the current track number and total number of tracks
or PBC On mode, and skip to the desired track number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time (Display only).
--
Shows the audio channel, and
changes
the audio channel.
b/B
Shows the current sound mode, and
changes
the
setting.
b/B
Shows the
DivX
elapsed playing
time
and total time.
DVD
Movie.avi
Codec
Menu
:
Shows the Current
DivX V 5.0
/
1:00:00
Function (Use v / V to select desired option)
Options
Title Number
1/6
Time search
0:10:30
Audio Channel
2CH
1.
Subtitle
ABC
MPG
NONE
Selection Method
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,or
Numbers, ENTER
point by
the
elapsed
time
Shows the audio channel, and
changes
the audio channel.
Shows the current subtitle, and
changes
3D SUR.
mode.
Shows the current title number and total number of titles,
and skips to the desired title number.
searches the
Sound
0:06:32
the
setting.
directly.
b/B
b/B
Shows the current sound mode, and
changes
the
setting.
b/B
31
HOKUP
Before
Operation (Continued)
Displaying
Information
on-screen
(Continued)
Shows the
VR
elapsed playing
time
and total time.
Shows the title name,
TITLE 1
recording date,
recording mode, etc.
ORG: Original
PList: Playlist
Menu
01/01/04
Title Number
1/6
Number
4/26
Time search
0:10:30
Digital Audio
Output mode
D DUAL
M+S
Sound
3D SUR.
+RW
+R
ORG
0:06:32
SP
/
Shows the Current
mode.
2:12:10
Selection Method
Function (Use v / V to select desired option)
Options
Chapter
DVD
Shows the current title number and total number of
titles, and skips to the desired title number.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
point by
the
elapsed
time
directly.
Shows the current audio encoding method, and channel number, and changes the setting.
b/B
Shows the current sound mode, and
b/B
changes
the
setting.
Shows the
Video
elapsed playing
time
and total time.
Shows the title name,
recording date,
recording mode, etc.
Menu
01/01/04
Title Number
1/6
Number
Time search
Digital Audio
Output mode
0:06:32
SP
/
Shows the Current
mode.
2:12:10
Function (Use v / V to select desired option)
Options
Chapter
DVD
TITLE 1
4/26
0:10:30
Shows the current title number and total number of
titles, and skips to the desired title number.
b/B,or
Numbers, ENTER
Shows the current chapter number and total number of
chapters, and skips to the desired chapter number.
b/B,or
Numbers, ENTER
Shows the elapsed playing time, and
b/B,
Numbers, ENTER
searches the
2CH
1. L+R
Sound
3D SUR.
Selection Method
point by
the
elapsed
time
directly.
Shows the current audio encoding method, and channel number, and changes the setting.
b/B
Shows the current sound mode, and
b/B
changes
the
setting.
Shows
playing speed, the elapsed playing
progress bar and elapsed playing time.
VHS
VCR
VCR
SP
Menu
Function (Use v / V to select desired option)
Options
Time
Audio Channel
0:00:20
HIFI
Shows the elapsed playing time (Display only).
Shows the audio channel, and
changes
32
0:06:32
the audio channel.
Shows the Current
mode
Selection Method
--
b/B
with DVD and Video CD
Operation
Playing
DVD
a
Video CD
or
Moving
DVD
Playback Setup
Before
the remote
using
When
control, press the DVD but-
on
and select
operated.
the video input
the
1
2
3
system: Turn the audio system
input
source
on
disc has
source con-
(Z)
Load your chosen disc in the tray, with the
playback side down.
READING appears
starts
start, press N
In
on
(Z)
automatically.
(PLAY).
cases, the disc
some
When
tray.
the display window, and
If
might
menu
b / B to select
The
appear
displayed
may be displayed first after
Video CD which contains a menu.
menu screen
DVD
or
loading
title number.
to another CHAPTER/TRACK
1/4
VR
Video
a
a
title
on a
+RW
disc has
+R
more
than
VCD
one
chapter/track,
chapter/track or to return to the beginning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY twice. Then, use v / V to select chapter icon (or for a Video CD, select track icon). Then,
enter the chapter/track number using the numbered
buttons (0-9) or press b / B.
ip
is
v / V to select the
select the next
instead.
a menu screen
use
you can move to another chapter/track as follows:
Press SKIP (. or >) briefly during playback to
does not
playback
to
can move
or
(0-9)
DVD
to close the
title, you
follows:
4/26
Press OPEN/CLOSE
one
ton
Moving
tray.
than
DivX
+R
Then, press the appropriate numbered but-
and select
to open the disc
as
more
1/6
title icon.
connected to the Recorder.
Press OPEN/CLOSE
playback
If
a
+RW
Press DISPLAY twice then
nected to the Recorder.
Audio
VR
Video
another title
ton to select the device to be
Turn the TV
to another TITLE
a
DVD
Use the bBvVbuttons to select the
want to
view, then press ENTER
Press TITLE
or
to
title/chapter
start playback.
you
Search
DVD
DISC MENU / LIST to return to the
VR
Video
+RW
1 Press BACKWARD
menu screen.
(m)
or
+R
VCD
FORWARD(M) during
playback.
The recorder will
VCD
Use the number buttons to select the track you want
to view.
Press RETURN
Menu
setting
to return to the
menu
menu screen.
operating procedures for
depending on the disc.
menu screen.
You may also set PBC to OFF under
See page 29.
Setup
menu.
3
--
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
the
4-digit
code must
be entered and/or the disc must be authorized
"Rating",
--
(m) or FORWARD(M) to
select the required speed: b (Reverse play), m,
mb, mm, mmb, mmm (backward) or
M, MB, MM, MMB, MMM (forward).
With a Video CD, the Search speed changes: m,
mb, mm (backward) or M, MB, MM
(forward).
To exit SEARCH mode, press N (PLAY).
Still Picture and
otes
page 25).
DVDs may have a Region Code.
Your recorder will not play discs that have
(see
on
code different from your recorder. The
this recorder is 5 (five).
DVD
region
region code
VR
Video
The recorder will
can
frame
for
Frame-by-Frame Playback
1 Press PAUSE/STEP
2 You
a
go into SEARCH mode.
2 Press BACKWARD
and the exact
may differ
Follow the instructions on the each
using
the
(O)
now
+RW
+R
VCD
(X) during playback.
go into PAUSE mode.
back up the picture frame-by-
now
advance
by pressing
or
b / B
repeatedly during
PAUSE
mode.
3 To exit PAUSE
mode, press N (PLAY).
ote
General Features
The
picture frame-by-frame
in
reverse
is not available
for Video CD.
ote
Unless stated
otherwise, all operations described
ip
use
the remote control. Some features may also be available on the Setup menu.
You
ing
can
advance the
PAUSE/STEP
picture frame-by-frame by
(X) repeatedly on the remote
presscontrol.
33
PLAYBCK
Operation
with DVD and Video CD
General Features
(Continued)
VR
Video
+RW
+R
To
VCD
REPEATA
A-B
Repeat
DVD
Slow Motion
DVD
(Continued)
VR
Video
repeat
a
B
-
+RW
sequence in
a
The recorder will
now
2 Press BACKWARD
Repeat
(X) during playback.
go into PAUSE mode.
(m)
or
FORWARD(M) during
PAUSE mode.
the
The Recorder will enter SLOW mode.
3 Use the BACKWARD
4
(m) or FORWARD(M) to
select the required speed: t 1/16, t 1/8, t 1/4,
or t 1/2 (backward), or T 1/16, T 1/8, T 1/4, or
T 1/2 (forward).
With a Video CD, the Slow speed changes: T 1/8,
T 1/4 or T 1/2 (forward).
To exit Slow Motion mode, press N (PLAY).
Slow motion
playback
in
reverse
is not
possible
with
Video CDs.
DVD
Video
Karaoke DVD
VCD
While the disc is
playing,
a
play
+RW
+R
VR
press PLAY MODE
repeatedly
mode:
RANDOM, NORMAL
or
TITLE, (REPEAT OFF),
REPEAT CHAPTER, REPEAT
TITLE, REPEAT OFF
VCD: REPEAT
TRACK, REPEAT ALL, REPEAT OFF or
REPEAT TRACK, REPEAT ALL, RANDOM, NORMAL
DVD-RW(VR):
REPEAT
CHAPTER, REPEAT TITLE,
ALL, REPEAT OFF
ip
By pressing
SKIP >
unit selects another
during Random playback, the
title (track) and resumes Random
playback.
ote
a
Video CD with
PBC, you
must set PBC to OFF
in the
The
Setup menu. See page 29.
play mode may vary according
content.
34
at your chosen end point.
icon and REPEAT A-B appears on the TV screen, and
repeat sequence begins.
3 To cancel the sequence, press A-B
select REPEAT OFF.
Time Search
DVD
repeatedly
VR
Video
display
to
0:10:30
+RW
+R
DivX
The Time Search function allows you to start
any chosen time on the disc.
appears
on
the TV
playing
at
The
on-screen
elapsed playing
time of the
during playback.
screen.
The Time Search box shows the
2 Within 7
seconds,
Search icon in the
3 Within 7
the
Karaoke DVD: REPEAT
On
screen.
use
v / V to select the Time
on-screen
display.
The "-:--:--" appears in the Time Search box.
DVD, DVD-RW(Video), DVD+RW, and DVD+R:
REPEAT CHAPTER, REPEAT TITLE, REPEAT OFF
REPEAT
the TV
current disc.
modes
to select
on
again
1 Press DISPLAY twice
ote
Play
Repeat
starting point.
icon and REPEAT A- appears
2 Press A-B
VCD
title:
1 Press A-B at your chosen
1 Press PAUSE/STEP
+R
to the recorded
seconds,
required
can
the number buttons to enter
start time. Enter
onds from left to
You
use
not enter
right
an
hours, minutes, and
sec-
in the box.
invalid time.
If you enter the wrong numbers, press b / B to move the
under bar (_) to the wrong number. Then enter the correct
numbers.
4 Within 7
seconds, press ENTER
to confirm the start
time.
Playback
starts from the selected time
on
the disc.
with DVD and Video CD
Operation
General Features
3
(continued)
VR
Video
+RW
+R
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM
during playback
or
still
playback
x1 size
x2 size
→
→
x4 size
changes
x1 size
→
2 Use the bBvVbuttons to
zoomed
3 To
to actiin
screen
(normal size)
the
through
move
Use b / B to select "OK then press ENTER.
5
Repeat steps
6
To
press CLEAR or press
until the normal picture appears.
playback,
repeatedly
ote
the Contents of DVD Video
Checking
Discs: Menus
highlight
an
option. Or,
function may not work for
zoom
DVDs.
some
DVD
six
1
start
playback
can
+RW
from
a
DVD
+R
VCD
memorized
to
point. Up
be memorized.
Otherwise, the disc
Repeat step
2 To
menu
remove
is
on
the TV
screen
1 to enter up to six Marker
points
on a
Marked Scene
The Marker Search
menu
will appear
the TV
on
2 Use the bBvVbuttons to select
screen.
Marked
a
scene
that you want to recall.
3 Press ENTER.
will start from the Marked
remove
RETURN
angles, spoken lanchapters for the title.
the disc menu, press DISC MENU / LIST
briefly.
1 Press SEARCH.
4 To
may appear.
displayed.
Camera
Angle
If the disc contains
Playback
the
on
DVD
Disc Menu
disc.
a
menu
will appear
again.
The Marker icon will appear
To Recall
menu
menu
The disc
playback, press MARKER when
reaches the spot that you want to
memorize.
2
menu, the
1 Press DISC MENU / LIST.
disc
During
playback
a
may contain camera
guage and subtitle options, and
mark, follow these steps.
a
screen.
2 The
1/6
VR
Video
points
To enter
the bBvVbuttons to
your selection, then press ENTER.
If the current title has
MARKER
Marker Search
can
use
1 Press TITLE.
TV
You
scene.
(O).
Title Menu
The
additional Marked
erase
the Marker Search menu, press
remove
ton to select
normal
2-4 to
DVDs may contain menus that allow you to access
special features. To open the disc menu, press DISC
MENU / LIST. Then, press the appropriate number but-
picture.
resume
ZOOM
the TV
4
RETURN
vate the Zoom function.
Each press of the ZOOM button
the sequence shown below.
Press CLEAR.
"Delete selected marker? Proceed?" message appears.
Zoom
DVD
(Continued)
DVD
1/3
scenes
recorded at different
different
angles, you can change
during playback.
to
1 Press DISPLAY twice
during playback.
a
camera
angle
camera
2 Use v / V to select the ANGLE icon.
3 Press b / B
repeatedly
to select
a
desired
angle.
ip
scene.
The ANGLE indicator will blink
the Marker Search menu, press
recorded at different
(O).
angles
the TV
on
screen
to indicate that
at
scenes
angle switching
is
possible.
Marker Search
Changing
the Audio Soundtrack
5.1CH
1.
DVD
ENG
Press AUDIO then press b / B repeatedly during playback to hear a different audio language or audio soundtrack if available.
Move
To clear
a
Select
CLEAR
Delete
Close
ote
Marked Scene
Some discs feature both
1 Press SEARCH
during playback
The Marker Search
2
menu
or
will appear
on
Use bBvVto select the Marked
want to
erase.
in
stop mode.
the TV
scene
screen.
that you
tracks. There is
no
Dolby Digital and DTS soundanalog audio output when DTS is
selected. To listen to the DTS
recorder to
a
soundtrack,
DTS decoder via
puts. See page
one
of the
connect this
digital
out-
17 for connection details.
35
PLAYBCK
Operation
the Audio Channel
Changing
VCD
With
VR
Video
a
Video
with DVD and Video CD
+RW
Last Condition
+R
DivX
CD, press AUDIO then press
main and
audio
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of both
(Main + Bilingual) by pressing AUDIO.
3D SUR.
VR
Video
recalled.
otes
--
+RW
+R
can
produce
a
3D Surround
simulates multi-channel audio
VCD
effect, which
playback
from two
speakers, instead of the
speakers normally required to listen to
conventional stereo
five
more
multi-
channel audio from
a
home theater
1 Press DISPLAY twice then
sound icon.
Then,
use
use
Subtitles
system.
v / V to select the
effect, select "NORMAL".
OFF
ABC
or
b / B to select "3D SUR.".
2 To turn off the 3D Surround
DVD
DivX
Press SUBTITLE then press b / B repeatedly during
playback to see the different subtitle languages.
Finding
You
Locations
on a
Disc
VCD
any point on a video CD using
this function. Use this function only while a video CD is
can
directly
access
playing. Playback jumps
1 Press SEARCH
to the
point specified.
during playback.
The progress bar appears
on
the TV
screen.
PBC
33%
TRK 1
33%
2 Use b / B to find
a
start
position
for
playback.
3 Press ENTER to confirm the selected
Playback
starts from the selected
position.
position.
ote
This function works
36
only
when
no
stored in memory for use any time.
This recorder does not memorize settings of a disc if
Settings
are
you switch off the recorder before
play it.
DivX
This unit
the last
off the recorder. If you load a disc that had its settings
memorized, the latest stop position is automatically
--
DVD
user
disc that you have viewed.
memory
even if you remove the disc from the recorder or switch
a
3D Surround
DVD
settings for
Settings remain in
With DVD-RW discs recorded in VR mode that have
a
Memory
This recorder memorizes the
b / B
repeatedly during playback to hear a different
channel (STEREO, LEFT or RIGHT).
both
(Continued)
marker is memorized.
commencing
to
Playing
Playing
DivX Movie Disc
a
DivX Movie Disc
a
ip
Using this unit you can play DivX disc. Before playing
DivX files, read "About DivX movie files" on page 37.
1.
Insert
disc and close the
a
appears
the TV
on
tray. The Movie
menu
If the subtitle still does not
after the
press and hold SUBTITLE about
3 seconds then another language code of the subtitle is
1-2
steps
proceeded,
displayed properly.
screen.
Movie
Movie
9 Items
divx_vod_drm
-CD
display properly
Press v / V to select
1.
..
options
menu
divx 01.avi
a
folder/file
on
the Movie
menu
then press ENTER.
Movie menu options appear.
divx 02.avi
divx 03.avi
divx 04.avi
divx 05.avi
divx 06.avi
Press v / V to select
2.
divx 07.avi
divx 08.avi
[Play] Start playback the
[Open] Opens the folder
divx 09.avi
Select
Close
and press ENTER.
option,
an
selected title.
and
a
to
a
list of files in the
folder appears
2.
Press v / V to select
folder, and press ENTER. A
a
list of files in the folder appears. If you are in a file
list and want to return to the Folder list, use the v /
V buttons
the remote to
on
and press
highlight
ENTER.
3.
[Dubbing] Copies
DivX disc
VHS
tape. (page 45)
compatibility
with this recorder is limited
follows:
If you want to view a particular file, press
v / V to highlight a file and press PLAY.
Available resolution size of the DivX file is under
You
This recorder
variable
can use
playback
720x576
functions. Refer to
Press STOP to
stop the playback. The Movie
menu
appears.
a
x
H) pixel.
cannot play
back the DivX
name
file(s)
in the
of the DivX subtitle is limited to charac-
ters.
The total number of files and folders
the disc
on
should be less than 1999.
ip
On
(W
Card.
Memory
The file
?
file(s)
About DivX movie files
as
pages 33-36.
4.
the
CD with
switch
MP3/WMA, JPEG and MOVIE file, you
Music, Photo and Movie
menu.
can
If the number of the screen frame is
over
29.97
frames per second, this unit may not operate
Press TITLE.
normally.
If the video and audio structure of recorded file is
Notice for
displaying
Please refer to
Find
a
figure
not
notice when the DivX sub-
following
not display properly.
suitable language for the
title does
1.
the DivX subtitle
on
the
Language
*
of the record level.
GMC?
Available DivX Subtitle
MPEG4 standard. Some MPEG4
Original, English
English
French, German,
Italian, Spanish,
French, German, Italian,
or
Spanish, Portuguese
Swedish
encoders, like DivX
Xvid, have this option.
There
are
different levels of GMC
called
1-point, 2-point,
or
3-point
encoding, usually
GMC.
Portuguese
Dutch,
Russian
Russian
Playable
Other 6976
Greek
".avi", ".divx"
Other 8076
Polish
Playable
Other 7285
Hungarian
".smi", ".srt ", ".sub (Micro DVD format only)",
Other 6783
Czech
".txt
DivX file
DivX subtitle
(Micro
DVD format
Divx subtitle
2.
GMC, the unit supports
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
below.
Disc Subtitle
If the file is recorded with
only 1-point
DivX subtitle
returns to the menu screen.
interleaved,
played
Press SETUP. The
Press
select
Setup menu appears.
SETUP b [LANGUAGE] b [Disc Subtitle]
the language you have found.
Refer to "Disc Menu/Audio/Subtitle"
on
page 23.
then
Playable
on
only)"
except those listed above is
the TV
not dis-
screen.
Codec format
"DIV3", "MP43", "DIVX", "XVID", "DX50"
Playable
Audio format
"AC3", "PCM", "MP2", "MP3", "WMA"
within 8
48 kHz (MP3),
Sampling frequency:
32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
-
within
-
-
-
37
PLAYBCK
Audio CD and MP3/WMA
Playing
Disc
an
or
MP3
M/C
CD
The Recorder
can
Audio CD
play
WMA
play
can
audio CDs.
MP3/WMA formatted
Operation
MP3/WMA
1.
Also, the Recorder
recordings
Memory Card.
Before playing MP3/WMA recordings,
MP3/WMA Recordings on page 39.
1
on
TV
MP3/WMA CD
menu
appears
options,
select
a
tack
(or folder)
on
then press ENTER.
Use v / V to select an option then press ENTER to
confirm your selection.
menu
Play:
Starts
CD
options
playback
the selected
track.
Add
Program Add: Adds the track(s)
Program List. (page 40)
Random:
order.
Plays
to
tracks in random
the
on
screen.
Music
Music
Duration
Title
Audio CD
menu
Random
the memory card, see "Using Photo
Music menu for Memory Card" on page 9.
or
options
menu
Program
on
AUDIO CD
display
Play
disc and close the tray.
To display the Music menu for MP3/WMA file
or
menu
Music-Audio CD
a
recorded
-
2.
or
read the notes
To
the
on
CD-ROM, CD-R, CD-RW, DVD±R, DVD±RW disc
Insert
Music
0:52:16
-CD
152 Items
Root
Track 1
04:47
FOLDER 01
Track 2
04:01
FILE
Track 3
03:01
FILE
Track 4
03:30
Track 5
04:24
FILE
Track 6
05:01
FILE
Track 7
03:48
FILE
Track 8
04:09
FILE
Track 9
05:10
FILE
Track 10
04:11
FILE
Select
MARKER Mark
LIST
00:00
FILE
Close
Program
01.mp3
02.mp3
?
03.mp3
04.mp3
05.mp3
06.mp3
07.mp3
08.mp3
09.mp3
Select
AUDIO CD Menu
Music-CD
menu
When you select
LIST
Program
Program
Close
MP3/WMA CD Menu
options
WMA
track.
Play:
Play
MARKER Mark
a
MP3
Starts
playback
the selected
track.
Add
Random
Program Add: Adds the track(s)
Program List. (page 40)
Random:
Plays
to
tracks in random
order.
2Usev/Vtoselectatrackthenpress
(PLAY).
N
Playback starts.
During playback,
the current track's
elapsed playing
time will appear on the display window and
Playback will stop at the end of the disc.
?
menu.
When you select
Open
Program
Add
ips
You
view TV channel
can
or
video
input
a
folder.
Open: Displays
sub-folders and
MP3/WMA files
only
in the folder.
Add: Adds all track(s) in
the folder to Program List. (page 40)
Program
source
RETURN. If you want to return to the
Music menu, press DISC MENU / LIST.
by pressing
You
List
can
switch between the Track List and
by pressing
menus
Music-MP3/WMA
Program
?
DISC MENU / LIST.
When you select
On CDs with mixed content
MP3/WMA files and JPEG
(audio tracks,
files), you can select
among the Music-Audio CD menu, MusicMP3/WMA CD menu, and Photo CD menu
pressing
TITLE
If you select
informations
to
remove
repeatedly
in
Stop
by
MP3 and press DISPLAY, the file
are displayed. Press DISPLAY again
Add
Delete
If you
Folder
are
in
a
displayed.
file list and want to return to the
and press
highlight
ENTER to return to the previous menu screen.
Use the MARKER button to select multiple files
(folders). Press MARKER again to cancel the
list,
marked file
3
To
or
the v/V to
folder.
stop playback
STOP
38
use
(x).
at any other
time, press
playback
?
When you select
Plays
Delete
a
to
tracks in random
track(s)
from
folder.
Open: Displays
Open
Program
the selected
Program Add: Adds the track(s)
Program List. (page 40)
Delete: Deletes the
the memory card.
If you select a folder and press DISPLAY, the
number of subfolders and number of MP3/WMA
are
Starts
order.
the file informations.
files in the folder
track.
Random:
a
options
M/C
track.
Random
mode.
a
Play:
Play
Program
Memory
menu
sub-folders and
MP3/WMA files in the folder.
Add
Program
Add: Adds all
the folder to
track(s) in
Program List. (page 40)
Delete: Deletes the
the memory card.
folder(s)
from
Audio CD and MP3/WMA
Pause
MP3
CD
1 Press PAUSE/STEP
Operation (Continued)
M/C
WMA
Repeat
(X) during playback.
2 To return to
playback, press
PAUSE/STEP (X) again.
N
A-B
(PLAY)
or
To
press
repeat
sequence in
a
Moving
MP3
The
Press SKIP .
>
or
briefly during
playback to go to the next track
beginning of the current track.
or
Press SKIP . twice
step back
briefly
to
to return to the
to the pre-
vious track.
On
an
Audio
CD,
track number
ing playback
to go
directly
to any
track,
the numbered buttons
using
enter the
The
at your chosen end point.
icon and 'A B' appears on the menu screen,
-
icon
on
Play
While the disc is
to select
a
playing,
The recorder
REPEAT
TRACK,
MP3 and WMA: REPEAT
repeatedly
ALL, RANDOM, (NOR-
About
TRACK, REPEAT FOLDER,
to select
play
a
1.
SKIP >
Random
playback,
the
unit selects another track and
resumes
Random
play-
2.
".mp3".
repeatedly
(stereo, left or right).
to hear
a
different audio chan-
with this recorder
format should be "ISO 9660" and
3.
which creates
(m)
or
FORWARD(M) during
2 Press BACKWARD
Total number of files and folders
the disc should
playback quality.
Pre-recorded DVDs
many different types
of recordable disc formats (including CD-R containing
Customers should also note that
indicated
on
the
screen.
menu
MP3
or
WMA
required
press N
(PLAY).
are
optimal
automatically
are
Search
are
to meet
certain technical standards in order to achieve
conditions
mode,
on
requires discs/recordings
(m) or FORWARD(M) to
select the required speed: m, ,, mm
(backward) or M, <, MM (forward).
3 To exit SEARCH
or
system.
set to these standards. There
go into SEARCH mode.
and direction
ISO9660
an
be less than 999.
playback.
now
the
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
This Recorder
1 Press BACKWARD
compression
follows:
physical
JOLIET file
CD
The recorder will
CD-R
as
compatibility
"Easy-CD Creator",
M/C
WMA
Microsoft audio
"Direct-CD" etc., it is impossible to playback
MP3/WMA files. We recommend that you use
the Audio Channel
Press AUDIO
speed
file
"JOLIET".
back.
MP3
a
MP3/WMA Disc
during
Search
a
WMA(Window Media Audio)
is limited
nel
MP3 file that has
mode:
CD, MP3, and WMA: RANDOM, (NORMAL)
CD
an
technology.
WMA(Windows Media Audio) offers double
audio.compression of the MP3 format.
RANDOM, (NORMAL)
While the disc is in stop mode, press PLAY MODE
Changing
not read
can
An WMA file is
ip
By pressing
Recordings
compressed by using the
layer-3 file-coding scheme. We call
the ".mp3" file extension "MP3 files".
extension other than
MAL)
repeatedly
menu screen.
mode:
play
CD: REPEAT
press PLAY MODE
press
An MP3 file is audio data
M/C
WMA
from the
play,
About MP3
MPEG1 audio
MP3
CD
disappears
MP3/WMA
files that have
modes
menu screen.
repeat sequence begins.
Repeat
Notes
the Track List.
on
the
3 To exit the sequence and return to normal
A-B again.
dur-
(0-9)
on
point.
again
Repeat
and the
M/C
WMA
track:
icon and 'A-' appears
2 Press A-B
CD
a
1 Press A-B at your chosen start
Repeat
to Another Track
CD
files) that require certain pre-existing
(see above) to insure compatible playback.
permission
is
in order to download MP3/WMA files and
music from the Internet. Our company has no
to grant such permission. Permission should
always
be
sought
from the
copyright
right
owner.
39
PLAYBCK
Programmed Playback
The
with Audio CD and MP3/WMA
function enables you to store your favorite
tracks from any disc in the recorder memory.
Program
Program can contain
tracks (MP3/WMA).
Insert
1
or
(Audio CD)
or
256
MP3/WMA CD
options
M/C
WMA
display menu options, select a tack on
Program List menu then press ENTER.
The menu options appear on the left side
will appear.
menu
menu
To
MP3/WMA disc.
or
List
MP3
CD
1.
Audio CD
an
Audio CD
99 tracks
Program
the
of the
menu.
2
3
Use vVto select
track
a
then press ENTER.
The options appears
Use vVto
on
highlight
folder
or
the List
the left side of the
the
"Program
Use v / V to select
2.
Repeat steps 2-3
the Program list.
to
place
menu.
List.
Program
additional tracks
Play
Move
from the selected track.
Random
Move: Moves the
on
2.
a
Random:
the List to the
on
List.
Program
the
1 to mark additional tracks.
highlight
press ENTER.
The all marked tracks
the
"Program
Press PLAY MODE
Add" icon then
added to the
Program
List.
change
?
Use the CLEAR button to select all
tracks in random
tracks,
or
cancel
from
track(s)
menu.
Tracks
to select
repeatedly during playback
desired
?
otes
List
Program
Repeat Programmed
menu.
a
are
Plays
Delete: Deletes the
3. Select any track then press ENTER.
The options appears on the left side of the
4. Use v / V to
to
order.
track then press MARKER.
Repeat step
track(s)
the program order.
add multi tracks
1. Select
then press ENTER to
Play: Playback begins in the order
in which you programmed the tracks
ip
can
option
Add" icon
Delete
You
an
confirm your selection.
then press ENTER.
The selected track is added to the
4
on
repeat mode.
TRACK: repeats the current track.
ALL: repeats the all tracks on the Program list.
?
RANDOM:
Plays tracks
(No display): does
in random order.
?
OFF
not
play repeatedly.
all marked tracks.
Erasing
If you select folder for Programmed Playback, all
tracks in the folder are added to the program list.
AUDIO CD
:
Use B to
move
to the
5
Use
select the track you
6 playing.
Press
(N)
7 Playback begins
v / V to
PLAY
Program
1.
list.
2.
the last
programmed
track
8
playback from programmed playback, select a track on the
resume
normal
List then press PLAY (N).
"PRG" indicator disappears from the display
erase
List
from the
Program
multiple
tracks.
Press ENTER.
menu
options
appear
on
the left side of the
menu.
3.
on
the program list.
To
Select the track you wish to
List.
The
window.
playing
Program
Use the MARKER button to select
to start.
after
Track from the
ip
want to start
in the order in which you programmed
the tracks and "PRG" indicator appears on the display
Playback stops
a
Select 'Delete'
then press ENTER.
The selected track is deleted from the Program List.
Changing
1.
option
Track Order in the
Select the track you wish to
Program
List
move.
ip
window.
Use the MARKER button to select
2.
multiple
tracks.
Press ENTER.
The
menu
options
appear
on
the left side of the
menu.
3.
Select 'Move'
A
4.
yellow
then press ENTER.
bar appears in the Program List.
Use v / V to
option
move
the
yellow
location, then press ENTER.
The selected track is moved.
40
bar to the desired
JPEG File
Operation
JPEG File
Viewing
a
The recorder
can
play
discs
JPEG
files.
Before
playing JPEG recordings,
Recordings" on page 42.
1
Insert
read "Notes
JPEG
on
1.
2.
the memory card, see "Using Photo
Music menu for Memory Card" on page 9.
on
The Photo
menu
appears
on
the TV
?
-CD
Folder 03
MARKER Mark
Use vVbB to select
2 Open
3
icon is
a
highlighted
display
menu
When you select
A list of files in the folder appears.
Open
Photo
Copy
-CD
?
Close
cannot
4
in the Photo menu, it
those JPEG files.
see
Use vVbB to select
The
options
appear
on
a
means
Slide Show
you
Delete
file, then press ENTER.
the left side of the
list,
are
use
the
You
can
in
a
menu.
file list and want to return to the Folder
the v / V buttons
on
the remote to
icon and press ENTER.
view TV channel or video
input
highlight
source
by
RETURN. If you want to return to the Photo
menu, press DISC MENU / LIST.
On CDs with mixed content (audio tracks, MP3/WMA
pressing
files and JPEG
options
photo
file.
as
full
screen.
menu.
Displays
(page 42)
Slide Show
to
Memory
a
folder.
Open: Displays
sub-folders and
JPEG files in the folder.
Copy: Copies the folder(s)
ory card. (page 42)
options
menu
a
photo
to
mem-
M/C
file.
Full Screen: Shows the selected
file
as
full
screen.
Slide Show:
menu.
Displays
(page 42)
Slide Show
Delete: Deletes the selected
from the
ip
If you
on
JPEG
Slide Show:
When you select
Full Screen
ote
displays
a
file
Photo-Memory
icon
(or folder)
Full Screen: Shows the selected
When you select
JPEG
If the
file
menu.
?
MARKER Mark
a
Copy: Copies the file(s)
card. (page 42)
Close
the left side of the
select
options,
then press ENTER.
Use v / V to select an option then press ENTER to
confirm your selection.
Copy
Press ENTER.
Select
reappears.
menu
folder, then press ENTER.
on
time, press STOP.
options
menu
Slide Show
Folder 08
Folder 07
To
Full Screen
Folder 05
Folder 04
Folder 06
Select
Folder 02
Folder 01
menu
menu
Photo-CD
screen.
Photo
JPEG
The Photo
the
disc and close the tray.
To display the Photo menu for JPEG files
or
at any
stop viewing
Photo
a
recorded
To
Card with JPEG
Memory
or
6
M/C
?
When you select
Open
Delete
a
Memory
card.
file(s)
(page 42)
folder.
Open: Displays
sub-folders and
JPEG files in the folder.
Delete: Deletes the selected
folder(s) from
(page 42)
the memory card.
you can select among the
AUDIO CD menu, MP3/WMA CD menu, and Photo
CD menu by pressing TITLE repeatedly in Stop mode.
files),
Use v / V to select "Full Screen"
5 press
option
then
ENTER.
File
03.jpg
4/20
90
90
Prev
Next
Stop
Hide
41
PLAYBCK
JPEG File
Operation (Continued)
Use v / V to select
Skip Images
While
viewing picture, press SKIP (.
to advance to the next file or return to the
>)
previous
a
Rotate
once
file.
Images
Use v / V while
clockwise
or
or
viewing
to
picture
a
flip
the
4 "Copy" option
When
5
picture
View Slide Shows
option
the Photo
If you select a folder on the disc to copy,
JPEG files in the folder will be copied.
menu.
?You must insert
menu
Sets the
options.
1.
for Slide Show
(Slow,
stop the Slide Show and
returns to
2.
multiple
on
the disc to
Selecting multiple
an
JPEG file
again
Repeat step
files
(folders)
menu
JPEG file
folder you wish to
Card menu.
or
or
to cancel the marked file
1 to mark additional files
erase on
multiple
files.
options
Select "Delete"
appear
on
the left side of the
menu.
then press ENTER.
The confirm message for deleting will appear.
4.
Use b / B to select "OK" then press ENTER.
The selected file(s) or folder is deleted from the
Memory
option
Card.
on
Depending
JPEG
on
Recordings
the size and number of JPEG
files, it
may take several minutes for the recorder to read the
disc's content. If you don't see an on-screen display
after several minutes, some of the files are too big
or
folder.
reduce the resolution of the JPEG files to less than 4
mega
pixels
and burn another disc.
The total number of files and folders
(folders).
total number of files
on
are
free but the
the folder should be less than
999.
appear
on
the left side of the
Use v / V to select the
"Copy" option
menu.
then
Some discs may be incompatible due to different
recording formats or the condition of the discs.
When you are using software such as "Easy CD
Creator" to burn JPEG files on a CD-R, ensure that all
ENTER.
menu
from
---
Press ENTER.
options
menu
Notes
folder then press MARKER.
A check mark appears on the file (folder). Press
Copy
Copy
M/C
menu.
3 press
Select "New album"
3.
files.
1Usev/VtoselectanJPEGfileorfolderonthe
Photo-CD
The
(folder).
Press ENTER.
The
Copying JPEG file(s)
JPEG
Card
Memory
2
album
new
Use the MARKER button to select
Use the MARKER button to select
2.
use
ip
menu.
MARKER
memory card in the recorder to
Photo-Memory
then press ENTER to start the
ote
a
Select
Fast)
option
the
on
the
Slide Show.
Select
copied.
Erasing JPEG file(s) or folder(s)
the Memory Card M/C
All files.
or
speed
4. Select the Start
1.
a
the
then press ENTER.
"NONAME##" folder is created.
Cancel
3. Use vVbB to set the
create
can
option
Normal
Start
Selected file
You
All
Speed
the Photo
only
ip
Object
5. Press STOP to
Copy
appears.
Slide Show
or
the
highlighted on
begin copying.
this function.
The Slide Show
Normal,
is
So the sub-folders in the folder will not be
2. Press ENTER.
Object:
Speed:
"Copy" option
folder then press B.
otes
?
on
is
menu, press ENTER to
counterclockwise.
1. Select "Slide Show"
copied
highlighted.
a
will appear.
selected files have the
them into the CD
Copy
Select the album
C:\
NONAME 01
Copy
Cancel
If the files have
them
as
".jpg"
".jpg"
layout.
extension before
".jpe" extensions, please
copying
rename
files.
NONAME 02
File
NONAME 03
New album
42
".jpg" extension cannot be
read by this recorder, even though the files are shown
as JPEG image files in Windows Explorer .
names
without the
VCR Mode
Tape Playback
Preparation
Before
Special
the remote
using
control, press the VCR but-
and select
on
operated.
the video input
Horizontal lines
source con-
the
source
Normal
1
Insert
on
and select
VHS
indicator will
light
and the Recorder will power-
Make
sure
that the TIMER indicator in the
display
a
will
2
lighted. If it is, press POWER once.
tape without a safety tab is inserted, the Recorder
start playback automatically.
Press PLAY
(N)
the TV
on
3
(x)
to
STOP icon appears
the TV
screen.
If
perform the DVD palyback. If you press VCR (or
DVD/VCR) to watch the VCR playback again, playback
resumes from the point where playback was interrupted
(PAL tape).
You cannot playback for the both DVD and VCR at the same
a
tracking
function
adjusts
the
picture
(X) repeatedly
video
3
picture one frame at a
picture.
To return to playback, press
1 While in still
The
following
tape will be played back
slow
panel
of vertical
2 To return to
Counter
playback,
to advance the
time while
PLAY
viewing
still
a
(N).
at
a
speed
1/19 times
speed.
use
PR/TRK
(v/V)
more
automatically change
playback,
Memory
This is useful if there is
on
the
tape.
until the noise
on
the
is reduced.
jitter, adjust these controls very carefully.
Tracking is automatically reset to normal when the tape is
ejected or the power cord is unplugged for more than 3 seccase
enter the STOP
on
the Remote
than 3
minutes,
to normal
play
press PLAY
(N).
Function
a
section of
tape you
want to
view
appear because of scratches
the front
than 5
mode.
If noise appears on the screen during playback, press
either PR/TRK (v/V) on the remote control or
on
more
mode, press FORWARD (M).
the Recorder will
streaks.
Tracking
(v/V)
by using
Slow Motion
to
Tape speed (SP, LP) changes.
or snow
it
Control to minimize noise bands.
tape is played back for the first time.
Manual
screen.
protect the tape and video heads.
2 Press PAUSE/STEP
VHS
cases:
Streaks
the TV
still
During
The AUTO TRACKING function works in the
onds.
on
If slow motion mode continues for
remove snow or
In
appears
minutes, the Recorder will automatically
Tracking
screen
(X) during playback.
slower than the normal
The automatic
than
(N).
If the Recorder is left in the STILL mode for
time.
PROG.
press PLAY
picture vibrates vertically, stabilize
PR/TRK (v/V) on the remote control.
and
A
picture
mode to
If you wish to watch the DVD playback during the VCR playback, press DVD (or DVD/VCR) to change to DVD mode
more
Frame-by-Frame Playback
1 Press PAUSE/STEP
A still
otes
playback,
Still Picture and
tape reaches the end before STOP (x) is pressed,
the Recorder will automatically stop, rewind and eject the
tape, and turn itself off.
Auto
(M)
minutes, the Recorder will automatically enter the PLAY
mode, to protect the tape and video heads.
If the
Tracking Control
FORWARD
3
stop playback.
on
or
If the Recorder is left in the SEARCH mode for
2 To return to
screen.
It is not necessary to select the tape speed for playback. It will be automatically selected by the Recorder.
Press STOP
(m)
The Recorder will be activated in the SEARCH mode.
once.
PLAY icon appears
screen.
during playback.
window is not
If
the TV
on
This function lets you visually search forward and backward for a desired scene on your tape.
1 Press BACKWARD
automatically.
up
will appear
Search
video cassette.
prerecorded
The
(noise bars)
notes
automatically muted during special effect modes,
so there is no sound during search.
During the high-speed picture search modes, a short time is
needed to stabilize tape speed when re-entering the PLAY
mode. Slight interference may be observed during this time.
connected to the Recorder.
Playback
a
playback
The audio is
system: Turn the audio system
input
Playback
VHS
This is normal.
nected to the Recorder.
Audio
effects
Special
ton to select the device to be
Turn the TV
Effect
immediately after recording or if you want to return
to the same point several times.
1 Begin recording or playing a tape.
2 Press DISPLAY repeatedly to display the real-time
counter
3 At the
on
the TV
screen.
you want to locate later, reset the realtime counter to 0:00:00 by pressing CLEAR.
point
Continue to
play
or
record.
4 Press STOP when
5
recording
Press RETURN (O).
The tape automatically stops
or
playback
when the
finishes.
tape
counter
returns to about "0:00:00".
43
PLAYBCK
Basic
Basic
Recording
from
Recording
Follow the instructions below to record
Recording
starts
tape is full
or
a
TV
Instant Timer
Recording
Instant Timer
TV program.
and continues until the disc
a
immediately
you stop the recording.
or
easily
of
a
Recording
preset length
Follow
steps 1-5
allows you to make a recording
without using the program timer.
as
shown left
1 from TV).
Press REC (z) repeatedly
2 ing time length.
(Basic Recording
a
1
Switch
DVD)
or
disc
or
the Recorder, select the device (VCR
for Recording and load a recordable
on
tape.
Also make
sure
that the TV
input
Recording
is set to this recorder.
2
3
Set
(See
press increases the
time by 10 minutes within free space.
VCR: Each subsequent press increases the
27).
page
the front
Input:
panel
Input:
MONO
The table below shows what will be recorded
Instant Timer Record Menu
on
the
settings for different types of broadcast. The last
column (Monitor Audio) shows what you'll hear as it is
recording.
Broadcast Audio
Broadcast
VR mode
Audio
Tape
MONO
or
RCh
Monitor
Video, +R
or
Audio
STEREO
STEREO/SUB
STEREO
STEREO
STEREO
MONO/MAIN
MONO
MONO
MONO
STEREO/MAIN
MAIN
SUB
MAIN
MAIN
MAIN
STEREO/SUB
MAIN
SUB
SUB
SUB
SUB
STEREO/MAIN
MONO
MAIN
MAIN
MONO
MAIN
MONO
MONO/MAIN
MONO
2
?
The Recorder will
5 Recording
will start.
(The
If the unit is in VCR
lights
in the
(x)
the
display window.)
Recording continues
disc (or tape) is full.
until you press STOP
To record for
length
Recording
6
a
on
Press STOP
fixed
of
time,
see
or
Instant Timer
or
tape
Recording
recording
off
ends.
when the DVD Instant Timer
the unit will not
automatically power
off.
TV program while
watching another
1 Press TV/VCR to select the TV mode during recording. The TV indicator appears.
2 Using the TV remote controller, select the channel to
To record
REC indicator
to pause the disc
automatically power
when the Instant Timer
MONO
once.
(X)
If you press PAUSE/STEP (X) during the Instant
Timer Recording, it will be canceled.
Recording ends,
(z)
Recording
otes
?
Press REC
Time
When you want to continue recording, press
PAUSE/STEP (X) or REC (z).
MONO
MONO
to
during recording.
MONO
MONO
Recording
Press PAUSE/STEP
?
STEREO/SUB
will
recording time can be extended anytime by pressing REC (z).
Each subsequent press increases the recording time by
10 minutes (DVD) within free space or 30 minutes (VCR).
1
STEREO
setting
The
LCh
STEREO
SUB
To Extend the
To Pause the
RCh
the record-
automatically return
the TV screen for a moment. Also, remaining time of
recording is shown in the display window.
+RW mode
STEREO/MAIN
MAIN
the Recording Time
(z) or DISPLAY once to check
time. The recalled
ing
different
MONO/MAIN
0:17:32
SP
Checking
4 record.
MAIN+SUB
VCR
PR 09
or
Use AUDIO to select the audio channel to
STEREO
00:09:05
2H 01M Free
SP
30min Rec.
remote control to select the
LCh
DVD
PR 09
MONO
Press REC
Selected Audio
recording
120min Rec.
TV channel to record.
TV
recording
by 30 minutes. Please confirm the VHS tape has
enough remaining time to be recorded before recording.
recording mode as necessary by pressing
REC MODE repeatedly.
DVD: SP (Standard quality), LP (Low quality),
XP(High quality), EP (Extended quality)
VCR: SP (Standard Play), LP (Long Play)
(v/V) on
PR/TRK(v/V) on the
subsequent
time
a
Use PROG.
starts after the first press.
DVD: Each
If you load a completely blank DVD-RW disc, Disc
Initialize menu will appear, to select a desired Recording
Mode to initialize the disc
to select the record-
one
be viewed.
right.
(x)
to
stop recording.
ips
When recording onto a video tape, you can change a recording
channnel in the recording pause mode. (You cannot change a
recording channel in the DVD recording pause mode.)
otes
?
?
44
If you wish to watch the DVD playback during the VCR
recording, press DVD (or DVD/VCR) to change to DVD
mode and perform the DVD playback. You cannot playback
the VCR during the DVD recording.
If you wish to use the DVD recording during the VCR
recording, press DVD (or DVD/VCR) to change to DVD
mode and perform the DVD recording. You cannot use the
VCR recording during the DVD recording.
Basic
Recording (Continued)
Copying
You
from DVD to VCR
copy the contents of a DVD to
the DUBBING (or DUB) button.
can
using
Copying
a
VHS
tape
You
from VCR to DVD
copy the contents of a VHS tape to a recordable DVD disc using the DUBBING (or DUB) button.
can
This allows you to archive your old VHS
tapes
ote
If the DVD
you are attempting to copy is copy
protected, you will not be able to copy the disc. It is not
permitted to copy Macrovision encoded DVDs (or
Insert
1
Insert
2
Insert
a
a
a
VHS
Tape
blank VHS video
tape into the VCR deck.
Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
3
Select DVD mode
Find
4 you
(or Disc) from which
recording using the PLAY and
PAUSE functions.
results, pause playback
at the
point
Press the DUBBING button
The
press DUB button
Dubbing
1
Insert
Insert
a
attempting
to copy is
a
recordable DVD disc.
blank recordable DVD disc in the DVD
deck and close the disc
2
Insert
a
VHS
tray.
Tape
Insert the VHS video
tape you wish
to copy into the
VCR deck.
ote
menu
on
on
the remote
the front
3
from which
you want to record.
or
are
copy protected, you will not be able to copy the tape. It
is not permitted to copy Macrovision encoded tapes.
the DVD
on
want to start
5 trol
tape you
When
panel.
the place
For best
If the VHS video
by pressing DVD on the
pressing DVD/VCR on the
remote control or
front
ote
(or Discs)
Discs).
to DVD.
con-
4
using a DVD±RW disc, you must initialize
before copying; see page 27.
Select VCR mode by pressing VCR on the
remote control or pressing DVD/VCR on the
front panel.
Find the place on the VHS tape from which you
want to start recording using the PLAY, BACKWARD, FORWARD and PAUSE functions.
panel.
For best
appears.
results, pause playback
at the
point
from which
you want to record.
Press the DUBBING button
Dubbing
Free
5 trol
--%
Space
or
The
press DUB button
Dubbing
menu
on
the remote
the front
con-
panel.
appears.
SP
Rec. Mode
Dubbing
Dubbing
Stop
Free
Mode:
01H54M
SP
Dubbing
SP
(Standard Play)
LP (Long Play, 2 times SP).
Select Dubbing then press ENTER
(or DUB) to start copying.
Space
Rec. Mode
6Usev/V/b/BtoselectthedesiredRecord
?
on
Stop
?
7
or
DUBBING
6Usev/V/b/BtoselectthedesiredRecord
Mode:
EP
(Extended Quality)
LP (Low Quality)
SP (Standard Quality)
XP (High Quality)
Select Dubbing then press
(or DUB) to start copying.
?
?
ip
?
If you press PAUSE/STEP during Copy mode, both the
DVD and VCR decks go into Pause mode and the "DUB"
indicator blinks
on
the front
While in Pause
panel display.
DVD playback position using
mode, you can adjust the
PLAY, BACKWARD, FORWARD, PAUSE/STEP,
VCR deck will remain in Pause mode. To
press the DUBBING
8
(or DUB)
?
7
or
DUBBING
etc. The
resume
ip
copying,
button twice.
If you press PAUSE/STEP during Copy mode, both the
DVD and VCR decks go into Pause mode and the "DUB"
Copy Process
To stop copying at any other time, press STOP (x).
You must stop the Copy process manually when the
DVD movie ends, or the unit may replay and record
over and over again.
Stop
ENTER
the
indicator blinks
on
the front
panel display. While in Pause
VCR playback position using
mode, you can adjust the
PLAY, BACKWARD, FORWARD, PAUSE/STEP,
DVD deck will remain in Pause mode. To
press the DUBBING
8
(or DUB)
etc. The
resume
copying,
button twice.
Copy Process
To stop copying at any other time, press STOP (x).
Copying will stop automatically when the VHS tape
Stop
the
ends.
45
RECODING
Timer
Recording
This Recorder
grams within
be
can
Enter the necessary information for your timer
2 recording(s).
of 1 month.
period
a
to record up to 8 pro-
programmed
?
1
Press TIMER REC.
The Timer Record
?
menu
will appear.
?
Timer Record
Media
Date
9
?
Media
C07
?
PR
Date
or
--
11:00
SP
10:07
media
a
(DVD
or
?
3
Close
?
Start Time
?
End Time
?
Mode
--
a
daily
a
--
--
or
weekly
Set the
a
recording
SP, LP, EP, XP,
VCR: SP, LP, AT (Auto)
or
AT
the disc
mode, if necessary,
or
to
Timer Record List.
the program.
The Timer Record List will appear.
save
(O)
to exit the Timer Record
Make sure that you load a recordable disc or
tape and press POWER to switch your unit to
start time.
otes
end time.
(Auto)
?
The Timer indicator
?
If the Disc and
?
tape and switches record
complete recording
the
program.
?
?
Tape
tape is loaded,
or
mode determines how much time is
on
Press ENTER to
display
Standby.
record mode.
DVD:
available
5
advance,
program.
recording
Press TIMER REC to
4 List.
VCR).
date up to 1 month in
Set the
Choose
(Auto)
--
Press RETURN
a
Choose
select
AT
Mode
memorized program number, or
of the external inputs from which to record.
--
one
?
Choose
End Time
TIMER REC Timer Record List
Choose
--
Start Time
16/05 Sun
OK
min Free
(left/right) move the cursor left/right
v / V (up/down)
change the setting at the current cursor position
Press RETURN (O) to exit the Timer Record
--
menu.
PR
DVD
198
SP
b / B
or
lights
on
the front
indicator
are
panel display.
blinking, either no
the loaded disc is not recordable.
The Recorder will record the audio
according to the current TV tuner setting (Stereo, Mono or Bilingual).
Use the AUDIO button to set the audio before switching
the Recorder to Standby mode.
You must press POWER to stop the Timer Recording.
The Recorder will automatically power off when the
Timer Recording ends.
If the unit is DVD mode when the VCR timer
?
?
recording
ends, the unit will not automatically power off.
There is a short delay when a timer recording finishes to
confirm the recorded program. If two timer recordings are
set to record sequentially (one right after the other), the
very beginning of the later program may not be recorded.
If you wish to watch the DVD playback during the VCR
timer recording, press DVD (or DVD/VCR) to change to
DVD mode and perform the DVD playback. You cannot
playback the VCR during the DVD timer recording:
The recommendable recordable DVD discs
DVD-R
SONY
(8x, 16x)
TDK (4x, 8x)
Ve rbatim (4x, 8x)
Panasonic (2x, 4x)
DVD+R
SONY
(2.4x, 4x, 8x, 16x)
TDK (4x)
Mitsubishi (4x, 8x)
Ricoh (2x, 4x, 8x)
DVD-RW
Victor
(1x, 4x)
Maxell (1x, 2x, 4x)
TDK (2x)
Mitsubishi (2x)
---
46
disc
DVD+RW
SONY
(2.4x)
TDK (2.4x)
Philips (4x)
Ricoh (2.4x)
H P (2.4x, 4x)
DVD+R(DL)
Mitsubishi (2.4x)
Maxell (2.4x)
-
-
-
Timer
Recording (Continued)
Checking
Timer
Programming
can
is turned
Recording
Details
be checked whenever the Recorder
Press TIMER REC twice.
on.
?
Use v / V to select
timer
?
Press ENTER to edit the selected program.
Timer Record menu appears.
?
Press CLEAR to delete the selected program
from the Timer Record List.
a
recording.
RECODING
Timer Record List
Media
PR
Date
Start Time
11
16/05 Sun
10:12
Edit
Canceling
You
can
clear
CLEAR Delete
a
a
30min
Mode
SP
Check
Rec. OK
Close
TIMER REC Timer Rec
Timer
timer
Duration
Recording
setting anytime
before the record-
ing actually starts.
Usev/Vtoselectaprogramyouwanttoeraseon
?
the Timer Recorder List. If you want to
program, press CLEAR.
Timer
Stopping
a
After
recording
timer
a
Recording
has
started, you
erase
in
the
Progress
can
still cancel
the program.
Press POWER.
?
Timer
Even
Recording Troubleshooting
the timer is set, the recorder will not
though
record when:
(or tape) loaded.
?Anon-recordable disc (or tape) is loaded.
Disc Protect is set to ON in the Setup menu
(see page 29).
?
There is
no
disc
?
?
Power is turned
?
There
on.
titles
already 99 titles (DVD-RW, DVD-R) or
(DVD+RW, DVD+R) recorded on the disc.
are
You cannot enter
a
49
timer program when:
?Arecording is already underway.
The time you're trying to set has already passed.
There are already 8 timer programs set.
?
?
If two
?
?
timer programs overlap:
The earlier program takes priority.
or more
When the earlier program
finishes, the later program
starts.
?
If two programs are set to start at exactly the
time, the program entered first takes priority.
If the disc is
damaged,
the
successfully.
In this
shows "Rec.
OK", it may
case
recording may
even though the
not
same
complete
Check field
not be.
47
from
Recording
from External
Recording
You
can
record from
camcorder
external
or
an
external
VCR, connected
Input
Components
component, such
as a
to any of the recorder's
from
Recording
You
record from
can
the DV IN
jack
a
the
on
component you
record from is connected
properly
want to
Before
to the
DV IN
Digital Camcorder
a
digital camcorder connected to
front panel of this recorder. Using
the recorder's remote, you
corder and this recorder.
inputs.
Make sure that the
1
External
an
can
control both the
recording, make sure that the
jack is set up (see page 27).
audio
cam-
for the
input
Recorder. See page 18.
2
Press AV
repeatedly
to select the external
input
to record from.
ips
?
The
?
Some camcorders cannot be controlled
?T uner: Built-in tuner
?AV1: EURO AV1 AUDIO/VIDEO mounted
signal
must be DVC-SD format.
this
using
recorder's remote.
back
panel
?AV2: EURO AV2 DECODER mounted on back panel
?AV3: AV3 IN (VIDEO, AUDIO (L/R), S-VIDEO IN)
mounted on front panel
?D V: DV IN mounted on front panel
on
source
?
If you connect
cable, you
second DVD Recorder
a
using
DV
a
cannot control the second DVD Recorder
from this one.
?You can't control this unit
connected to the DV IN
remotely
jack.
from
component
a
?You can't record date and time information from
ote
Check that the Audio In
as
are
you want them. See page 27.
Load
recordable disc
a
3
Select
4 pressing
the
recording
1
tape.
or
mode
as
necessary
2
by
REC MODE
(Standard Play),
Press REC
5 Recording
(z)
LP
(The
REC indicator
continues until you press STOP
tape is full.
To record for
Recording
6
a
on
Press STOP
fixed
length
of
to
lights
in the
time,
see
(x)
or
the
is
as
you
require.
(original audio)
and
Record Audio in sub-menu
Record Audio
on
page 27
information.
4
want to
For best
to select the DV
display
input.
window.
place on the camcorder tape
the recording to start from.
results, pause playback
at the
point
that you
from which
you want to record.
?
Depending
on
your
camcorder, you
can use
recorder's remote to control the camcorder
this
using
the
STOP, PLAY and PAUSE functions.
stop recording.
If your source is copy-protected using CopyGuard, you will not
be able to record it using this recorder. See Copyright on page
repeatedly
DV appears in the
Press REC
(z)
once
to start
recording.
automatically stopped if the recorder
detects no signal.
?You can pause or stop the recording by pressing
PAUSE/STEP (X) or STOP (x). You cannot
?
details.
more
Find the
Instant Timer
ote
more
(overdubbed audio).
DV Input is set from the DV
of the Setup menu. See DV
3
5
9 for
choose between Audio 1
Press AV
page 44.
(x)
can
input
(Long Play)
Recording
or
You
for
display window.)
disc
Check that the DV audio
?
once.
will start.
Make sure your digital camcorder is connected
to the front panel DV IN jack. See page 18.
Audio 2
repeatedly.
DVD: SP (Standard Quality), LP (Low Quality),
XP(High Quality), EP (Extended Quality)
VCR: SP
DV
cassette.
DV Record Audio
settings
a
Recording
is
control the camcorder from this remote control
during recording.
?
In Video
mode, the final frame of the recording
may remain
?
48
displayed
on screen
recording stops.
For timer recording
recorder, the digital
to work
switched
operating.
on
and in
for
properly
a
while after
on
this
camcorder must also be
from
Recording
External
an
Input (Continued)
DV-Related
What is DV?
also known
Using DV,
DV-equipped
i.LINK, you
input
signals.
and
connect
using
a
single
a
output of audio, video, data and
The i.LINK interface is also known
"i.LINK" and the "i.LINK"
?
can
camcorder to this recorder
DV cable for
control
as
as
IEEE 1394-1995.
trademarks.
logo
This recorder is only compatible with DV-format
(DVC-SD) camcorders. Digital satellite tuners and
Digital VHS video recorders are not compatible.
?You cannot connect
a
are
more
than
one
DV camcorder at
ment connected via the DV IN
jack (including
equiptwo
DVD
?
It
recorders).
may not always
?
possible to control the connected camcorder via the DV IN jack.
Digital camcorders can usually record audio as stereo
your
the
cam-
Not connected to Camcorder.
The camcorder is not connected
properly,
or
corder is switched off.
Too many devices connected.
The DV jack on this recorder supports connection to
just
camcorder.
one
or
This recorder
can
only
record
one
stereo audio track.
or
Audio 2
as
required (see page 27).
Audio input to the DV IN jack should be 32 or 48kHz
(not 44.1kHz).
Picture disturbance on the recording may occur if the
source component pauses playback or plays an
source
Check the tape.
There is no cassette loaded into the connected
equip-
ment.
Uncontrollable device.
This recorder cannot control the camcorder.
twin stereo tracks of 12-bit/32kHz.
16-bit/48kHz,
unrecorded section of
component,
or
if the power fails in the
the DV cable becomes discon-
tape,
Updating
the information.
Camcorder is
the information for DV.
updating
Camera mode.
Camcorder is set to
mode.
camera
Troubleshooting
or
nected.
If you can't get a picture and/or audio
jack, check the bullet points:
?
?
on
be
Set DV Record Audio to Audio 1
?
You may see the following messages appear
TV screen when using the DV IN jack.
time to this recorder.
?You cannot control this recorder from external
?
Messages
Although DV Record Audio is set
Audio 2 signal is not present, DV
reset to Audio 1 automatically.
to Audio 2 and
Record Audio will be
Make
?T ry
sure
the DV IN
the DV cable is
off the
switching
switch back
?T ry
through
properly connected.
connected equipment then
on.
switching
the audio
input.
otes
?
Depending
on
the connected
be able to control it
using
camcorder, you may
the remote control
not
supplied
with this recorder.
?
Before you set the mode of your Camcorder to camera mode, turn down the volume of connected Sound
device. There
can
be
a
howling
sound.
49
RECODING
Title List and
the Title
Using
List Menu
Chapter
List-Original
VR
menu
ip
The Title
List-Original is where you build and edit your
and where you can delete titles and make other
Playlist,
changes to the Original content of the disc. You can
also play individual titles directly from the Title ListOriginal menu.
The recorder must be stopped in order to edit using
Title List-Original.
1
Press DISC MENU / LIST
the Title
?
List-Original
repeatedly
?To exit the Title
RETURN
the
display
more
detailed title information
1
2
the
Chapter List-Original
Press DISC MENU / LIST
Title
List-Original
VR
menu
repeatedly
to
display
menu.
Use vVbBto choose the title you want to
view Chapter List-Original menu then press
ENTER.
display
are more
display
for selected title.
Using
menu.
Use the v / V buttons to
next page if there
to
Press DISPLAY to
the
previous/
Title
than 6 titles.
List-Original
the
List-Original options
appears
the left side of
on
menu.
menu, press
Use v / V to select
(O).
3 Original options
1/12
Title List
Original
'Chapter'
from Title List-
then press ENTER.
Chapter List-Original
menu
appears
the TV
on
screen.
DVD-VR
TITLE 1
4hour 8min
LP
16/05
TITLE 2
0:16:00
TITLE 3
0:35:00
17/05
18/05
0:30:00
Free
Chapter List
TITLE 1
16/05/2004 Sun 0:03:31
Original
1/9
TITLE 4
19/05
TITLE 5
0:08:00
Select
2
To view Title
DISPLAY
0:10:00
Info.
LIST
21/05
0:15:00
Close
Playlist
List-Original options,
select the
title you want then press ENTER.
Title List-Original options appears on the left side of
the
3
20/05
TITLE 6
menu.
Use v / V to select
an
option
Select
To view
Play:
Play
Starts
playback
the
Chapter: Moves Chapter ListOriginal menu of the title.
(refer to right on this page)
Delete
Protect
Delete: Deletes the title.
Edit
(page
57)
Add
Protect: Protects accidental
Edit: Selects Edit
Use v / V to select
name.
Delete Part
?
Play
the Title.
Title
Playlist Add: Adds the
the Playlist. (page 56)
Dubbing: Copys
VHS
Press RETURN
menu.
a
tape.
(O) repeatedly
to exit Title List-
playback
chapter.
menu
of the
left
on
of the
this
Delete: Deletes the
Playlist Add
chapter.
page)
chapter.
(page 57)
Combine:
one.
Merges two chapters
(page 58)
Playlist Add: Adds the chapter
to the Playlist. (page 56)
Press RETURN
the title to
then press ENTER
Starts
Original
(refer to
Delete
part of
title to
the left
Title: Moves to Title List-
into
(page 57)
option
selected
(page 58)
a
an
Play:
options.
Delete Part: Deletes
on
to confirm.
?T itle Name: Edits the title
Title Name
4 Original
of
appears
menu.
Combine
recording, editing or deleting
the title. (page 59)
Dubbing
50
5
selected title.
Chapter
Playlist
side of the
select the
want then press ENTER.
Chapter List-Original options
to confirm.
Close
Playlist
Chapter List-Original options,
4 chapter you
then press ENTER
LIST
6 List-Original
(O) repeatedly
menu.
to exit
Chapter
Title List and
Using
1
the Title
?
List-Playlist
To exit the Title
to
display
Chapter List-Playlist
Press DISC MENU / LIST
the
previous/
than 6 titles.
are more
menu
the
List-Playlist options
17/05
3 Playlist options
TITLE 3
0:35:00
18/05
0:30:00
appears
the left side of
on
menu.
Use v / V to select
0:16:00
display
ENTER.
(O).
1/12
16/05
to
want to
view
press RETURN
Title List
Playlist
TITLE 2
repeatedly
VR
1 the Title List-Playlist
Use vVbBto choose the title you
2
then press
Chapter List-Playlist
Title
TITLE 1
Menu
menu.
display
List-Playlist,
the
Using
menu.
Use the v / V buttons to
next page if there
?
repeatedly
(Continued)
VR
Menu
List-Playlist
Press DISC MENU / LIST
the Title
List Menu
Chapter
from Title List-
'Chapter'
then press ENTER.
Chapter List-Playlist
menu
appears
on
the TV
screen.
TITLE 4
19/05
TITLE 5
0:08:00
19/05
Select
LIST
TITLE 6
0:10:00
20/05
0:15:00
Chapter List
Close
Original
TITLE 1
16/05/2004 Sun 0:03:31
Playlist
1/9
2
3
To view Title
List-Playlist options,
you want then press ENTER.
Title List-Playlist options appears
the menu.
Use v / V to select
an
option
on
select the title
the left side of
then press ENTER
Select
LIST
Close
Original
to confirm.
To
Starts
Play:
Play
playback
Delete
5
name.
Use v / V to select
Delete: Deletes the title from the
Dubbing
Title
List-Playlist
menu.
(page
57)
Delete Part: Deletes
the Title.
Press RETURN
part
of
(page 57)
Dubbing: Copys
VHS
a
the title to
an
option
Play:
the left
then press ENTER
Starts
selected
Title
playback
chapter.
of the
Title: Moves to Title
List-Playlist
menu of the chapter. (refer to
left on this page)
Delete
Move
Delete: Deletes the
chapter from
the Chapter List-Playlist menu.
(page 57)
Combine
a
tape.
(O) repeatedly
on
to confirm.
Play
(page 58)
appears
menu.
Title Name: Edits the title
Delete Part
4 Playlist
side of the
select the
want then press ENTER.
Chapter List-Playlist options
Chapter: Moves Chapter ListPlaylist menu of the title. (refer
to right on this page)
Title Name
Chapter List-Playlist options,
4 chapter you
the
selected title.
Chapter
v iew
Move: Moves
chapter of
Chapter List-Playlist menu to a
position on the menu. (page 59)
to exit Title List-
menu.
a
Combine:
into
one.
Merges two chapters
(page 58)
ip
Press DISPLAY to
for selected title.
display
more
detailed title information
Press RETURN
6 List-Playlist
(O) repeatedly
to exit
Chapter
menu.
51
EDITNG
Title List and
Chapter
the Title List
Using
From the Title List
display
play,
can
(Continued)
Video
menu
you
List Menu
Deleting
name
and
Before
delete titles.
Once
a
screen
select
changes its
titles to play.
appearance and all you
can
do is
display
the Title
If you delete a title from
disappear from the Title
ing
List.
?
Title List
Title
LP
Free
Date
5/16
0:20:15
TITLE 2
5/17
0:43:30
TITLE 3
5/18
0:33:00
TITLE 4
5/19
0:10:00
TITLE 5
5/20
0:15:00
TITLE 6
5/21
0:17:00
DISPLAY
2
Title List
List
3
options
display.
List, but the available record-
the disc.
on
Info.
1
2
Close
Press DISC MENU / LIST to
Use vVbBto choose
display
Title List
title you want to
a
delete then press ENTER.
Title List options appears on the left side of the Title
menu.
a
Play
Title Name
an
option
Starts
Play:
then press ENTER
Delete
playback
Dubbing
the
selected title.
3
Title Name: Edits the title
Delete
name.
(page 58)
Title List.
Dubbing: Copys
VHS
Press RETURN
the title to
a
more
detailed title information
pressing ENTER,
displayed.
Repeat steps
5 the Title List.
6
deleting
will appear.
Use b / B to select 'OK' then press ENTER.
The selected chapter or title is deleted.
After
to exit Title List.
ip
display
4
tape.
(O) repeatedly
Use v / V to select 'Delete' then press ENTER to
confirm.
The confirm message for
Delete: Deletes the title from the
Dubbing
Press DISPLAY to
disc, the title will
deleting a title from a DVD-RW disc, the
remaining time available for recording will only
to confirm.
Title Name
4
DVD-R
When
title then press ENTER.
appears on the left side of the Title
Use v / V to select
Play
delete titles recorded
time will not increase.
List
Use v / V to choose
can
Duration
TITLE 1
Select
a
increase if it is the last title
1/12
4hour 21min
finalized, you
Caution
?
DVD VIDEO
disc is
a
Video
finalized, the Title List
Press DISC MENU / LIST to
1
Title
the disc.
on
Video mode disc is
a
the new,
updated
2-4 to delete additional titles from
Press RETURN
Title List
is
menu
(O) repeatedly
display.
to remove the
for selected title.
If the disc has
You should
already
see a screen
like the
been finalized
one
below.
Indicates total and current page number
Disc
name
Title list
DVD VIDEO
1
52
TITLE 1
1/2
5/16
0:30:21
2
TITLE 2
5/17
0:20:08
3
TITLE 3
5/18
1:10:03
4
TITLE 4
5/19
0:43:21
5
TITLE 5
5/20
0:15:21
6
TITLE 6
5/21
1:13:21
PAGE
UP
Moves to the next
PAGE
DOWN
previous
EXIT
or
page
Exits the Title List
screen.
Title List and
Using
List Menu
Chapter
the Title List
+RW
menu
ip
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You can
also play titles directly from the Title List menu.
The recorder must be stopped in order to edit using
Title List
1
the
menu.
Press DISC MENU / LIST to
(Continued)
the Title List
display
Press DISPLAY to
display
for selected title.
Caution
If you press REC (z) when the Title List menu
appears, the selected title is erased then overwrite
recording
starts.
(See
page 61 for
more
details.)
menu.
?
Use the v / V buttons to
next page if there
display
the
Using
previous/
than 6 titles.
are more
?To exit the Title List menu, press RETURN
(O).
2
DVD+RW
TITLE 1
4hour 8min
LP
1
the
Chapter
List
+RW
menu
Press DISC MENU / LIST to
display
Title List
menu.
1/12
Title List
16/05
TITLE 2
0:16:00
Title List
TITLE 3
0:35:00
17/05
18/05
Use vVbBto choose the title you want to
view Chapter List menu then press ENTER.
0:30:00
Free
options
appears
on
the left side of the
menu.
Use v / V to select
TITLE 4
19/05
Select
2
detailed title information
more
To view Title List
TITLE 5
0:08:00
DISPLAY
0:10:00
20/05
Info
3 options
TITLE 6
21/05
REC
options,
0:15:00
Chapter
Close
then press ENTER.
List menu appears on the TV
Capter List
select the title you
from Title List
'Chapter'
TITLE 1
16/05/2004 Sun 0:00:55
screen.
LP
want then press ENTER.
Title List options appears on the left side of the
1/9
menu.
3
Use v / V to select
option
an
then press ENTER
to confirm.
Play
Full
Starts
Play:
playback
selected title
Play
Chapter
Delete
Protect
Edit
Dubbing
Select
the
except the hidden
chapters.
Full
Play:
Starts
selected title
den
Moves
menu
of the title.
this
4 you
hid-
Chapter List
(refer to right
Chapter
Delete: Deletes the title.
5
Use v / V to select
of
Edit: Selects Edit
Divide
name.
?
Hide
?
VHS
4
Press RETURN
to left
one.
on
chap-
(page 58)
(Show): Hides (or Shows)
selected chapter. (page 60)
the
title into
(page 60)
Hide (Show): Hides (or
Shows) the all chapters
the title. (page 60)
Dubbing: Copys
chapter. (refer
page)
menu
Hide
6
two titles.
Hide
of the
ters into
options.
one
of the
Combine: Combines two
(page 58)
Divide: Divides
playback
chapter.
Title: Moves to Title List
?T itle Name: Edits the title
Title Name
then press ENTER
Starts
selected
this
recording, editing or deleting
the title. (page 59)
option
an
Play:
Combine
Protect: Protects accidental
chapter
to confirm.
Title
(page 57)
select the
options,
menu.
Play
page)
List
want then press ENTER.
Chapter List options appears on the left side of the
the
chapters.
Chapter:
on
playback
including the
To view
Close
Press RETURN
List
(O) repeatedly
to exit
Chapter
menu.
within
the title to
a
tape.
(O) repeatedly
to exit Title List
menu.
53
EDITNG
Title List and
the Title List
Using
List Menu
Chapter
(Continued)
+R
menu
Using
The Title List is where you can see the all recorded
titles, and where you can delete titles and make other
changes to the Original content of the disc. You can
also play titles directly from the Title List menu.
The recorder must be stopped in order to edit using
Title List
the
1
2
the
+R
menu
Press DISC MENU / LIST to
display
Title List
menu.
Use vVbBto choose the title you want to
view Chapter List menu then press ENTER.
Title List
menu.
Chapter
List
options
appears
on
the left side of the
menu.
1
Press DISC MENU / LIST to
the Title List
display
menu.
?
Use the v / V buttons to
next page if there
the
display
Use v / V to select
3 options
previous/
Chapter
from Title List
'Chapter'
then press ENTER.
List menu appears on the TV
screen.
than 6 titles.
are more
?To exit the Title List menu, press RETURN
(O).
Capter List
TITLE 1
16/05/2004 Sun 0:00:55
LP
1/6
Title List
1/9
DVD+R
TITLE 1
4hour 8min
LP
16/05
TITLE 2
0:16:00
17/05
19/05
Select
To view Title List
18/05
0:30:00
TITLE 5
0:08:00
DISPLAY
Empty
0:10:00
20/05
-
-/-
-
Info
Select
Title
To view
Close
options,
4 you
select the title you
menu.
Use v / V to select
an
option
then press ENTER
Play
Full
Starts
playback
selected title
Play
the
except the hidden
chapters.
Full
Delete
Protect
Play:
Starts
playback
selected title including the
den chapters.
Chapter
Moves
Chapter:
menu
Edit
of the title.
this
on
Dubbing
hid-
5
Use v / V to select
Edit: Selects Edit
of
options.
(page 58)
Hide (Show): Hides (or
Shows) the all chapters
the title. (page 60)
name.
Dubbing: Copys
VHS
Press RETURN
within
the title to
a
tape.
(O) repeatedly
to exit Title List
menu.
ip
Press DISPLAY to
for selected title.
54
display
then press ENTER
to confirm.
Play:
Starts
playback
chapter.
of the
Play
selected
Title
Title: Moves to Title List
Combine
of the
this
Hide
chapter. (refer
page)
menu
to left
Combine: Combines two
one.
on
chap-
(page 58)
(Show): Hides (or Shows)
selected chapter. (page 60)
Hide
the
6
?T itle Name: Edits the title
Hide
option
an
page)
recording, editing or deleting
the title. (page 59)
?
chapter
menu.
Chapter List
(refer to right
Protect: Protects accidental
Divide
select the
options,
ters into
Delete: Deletes the title.
Title Name
List
want then press ENTER.
Chapter List options appears on the left side of the
the
(page 57)
4
Chapter
to confirm.
Play:
Close
1:38:00
want then press ENTER.
Title List options appears on the left side of the Title
List
3
0:35:00
Free
TITLE 4
2
TITLE 3
more
detailed title information
Press RETURN
List
menu.
(O) repeatedly
to exit
Chapter
Title and
Chapter Editing
Edits you make to the Original content changes the
actual content of the disc. For example, if you delete
title
a
chapter from the Original content (Title or
Chapter), that title or chapter is deleted from the disc,
freeing up extra recording time.
When you edit the Playlist, on the other hand, you are
not changing the content of the disc. For example,
when you delete a title from the Playlist, you are just
telling the recorder not to play that title; nothing is actually deleted from the disc.
or
Titles, Chapters
Titles in the disc's
and Parts
VR
content contain
original
Adding Chapter
chapter marker anywhere in a Playlist or
Original title during recording or playback.
Once the chapter is marked, you can use the Chapter
can
Search
put
a
feature,
as
well
as
delete, combine and
move
chapters in the Chapter List-Original or Chapter ListPlaylist menu.
You can insert up to 999 chapter markers in both the
Original and Playlist contents.
one or more
chapters. When you insert a title into the Playlist, all the
chapters within that title also appear. In other words,
chapters in the Playlist behave exactly as chapters on a
DVD-Video disc do. Parts are sections of Original or
Playlist titles. From the Original and Playlist menu you
can add or delete parts. Adding a chapter or title to the
Playlist creates a new title made up of a section (ie.,
chapter) of an Original title. Deleting a part removes
part of a title from the Original or Playlist menu.
+RW
Chapter
+R
You
VR
Markers
ote
Chapter markers are inserted at regular intervals automatically. You can change this interval from the Initial
Setup menu (see Auto Chapter on page 27).
1
2
the title
Play
At the
(Original
or
Playlist).
you want to start
press CHP. ADD.
A
point
a new
chapter,
marker icon appears on the TV screen.
can also put chapter markers in during recording.
chapter
?You
Caution
?
When
editing using
the
Delete, Add and Move func-
tions, the
start and end frames may not be
set in the start and end point display.
?
exactly
as
you may notice a momentary pause between edits. This is not a malfunction.
During Playlist playback,
Changing
VR
Title Thumbnails
+RW
Thumb.
+R
Each title
displayed in the Title List menu is represented
by a thumbnail picture taken from the start of that title or
chapter.
If you prefer, select a different still picture from within a
title.
1
Play
the title
(Original
or
Playlist).
Press THUMBNAIL to make the
2 played picture
Original
The still
or
the
Playlist
one
currently
dis-
that appears in the
menu.
picture that you choose
Original or Playlist menu.
appears in both the
ip
You
change the thumbnail picture of the title on
the Chapter List-Original or Chapter List-Playlist menu.
Select a chapter on the Chapter List-Original or Chapter
List-Playlist menu then press THUMBNAIL. The thumbnail picture of the title that includes the chapter is
changed.
can
also
55
EDITNG
Title and
Making
Chapter Editing (Continued)
New
a
VR
Playlist
Use this function to add
an
Original
title
chapter
or
to
the
Playlist. When you do this, the whole title is put into
the Playlist (you can delete bits you don't need later
see Deleting an Original or Playlist title/chapter on page
57).
Adding Additional Title/Chapters
VR
Playlist
You
add
can
---
The title appears in the Playlist complete with the chapter markers that appear in the Original. However, if you
add more chapter markers to the Original later, these
are
not
You
automatically copied
over
into the
Playlist
.
title/chapter
1
2
to the
Playlist
on
1
only
Press DISC MENU / LIST
Title
2
Choose
to
menu.
an
title
Original
Playlist, then press ENTER.
Original menu options appears on
Play
menu"
Delete
Title
Protect
Delete
Edit
Combine
Playlist Add
Playlist
page 50.
title
chapter on the Original menu
to put into the Playlist, then press ENTER.
Original (Title or Chapter) options appears on the
left side of the Original menu.
or
Play
Delete
Title
Title
3
Protect
Delete
Edit
Combine
List-Original
Playlist
Playlist
Add
Chapter List-Original
Use v / V to select
menu
options
'Playlist
a
Add
Dubbing
Chapter List-Original
Use v / V to select
'Playlist
Original
Choose
a
playlist.
New
Select 'New
56
Add' from
then press ENTER.
Select
chapters
Playlist
TITLE 1
List-Original
new
Original
playlist.
New
The
Add' from
then press ENTER.
Select
3 options
Add
Dubbing
Chapter
Title
put into
screen.
Chapter
a
to
the left side of
Play
Play
4
chapter
or
List-Original menu.
If you want to display the Chapter List-Original
menu, refer to "Using the Chapter List-Original
Choose
display
display
Title
on
to
the
the
repeatedly
List-Original
repeatedly
a
page 50.
this page.
Press DISC MENU / LIST
title
add to
an
If you want to show the Chapter List-Original menu,
refer to "Using the Chapter List-Original menu" on
title.
add up to 999 chapters to one disc If you
want to add a chapter of a title, use the Adding a
can
Playlist
Original title or chapter to
even if it is already registered.
to the
Title
to insert
List-Playlist that is already regisa title or chapter, then press
ENTER.
The title
Playlist
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
Playlist'
4 tered
a
or
chapter
appears in the
updated Playlist
menu.
5
Repeat steps 1-4 to
ter on the Playlist.
6
Press RETURN
(O)
add additional title
to
exit,
LIST to go back to the Title
or
or
chap-
DISC MENU /
List-Original
menu.
Title and
Deleting
VR
a
Chapter Editing (Continued)
Title/Chapter
+RW
Deleting
+R
You
When you erase a title or chapter from the Playlist
menu on DVD-RW discs formatted in VR mode, you
only
remove
in the
it from the
Original
Playlist;
the
title/chapter
remains
menu.
If you choose to delete a title or chapter from Title List
or Chapter List menu, the title or chapter is actually
deleted from the disc and the
time available
remaining
for recording increases. Titles/chapters deleted
Original are also removed from the Playlist.
from the
1
2
3
can
VR
Part
a
delete
part which you do
a
not want in the title.
Press DISC MENU / LIST
Title
List-Original
repeatedly to display
Title List-Playlist menu.
or
Use vVbBto choose
a
title you want to
delete then press ENTER.
The options appears on the left side of the
Select 'Delete Part' from the
options
on
menu.
the
menu.
e.g., If you select "Delete Part"
on
Title
List-Original
menu.
Play
ote
It may not be possible to delete
than 3 seconds long.
chapters
that
are
less
Chapter
Delete
1
On the Title List
bBto choose
Chapter
chapter or
or
a
List menu, use vV
title you want to
delete then press ENTER.
Options appears on the left side of the
2
Select 'Delete'
option
on
the
options
Protect
Edit
screen.
Playlist
on
on
Title
Delete Part
Add
the
Dubbing
menu.
e.g., If you select "Delete"
Title Name
List-Original
4
menu.
Press ENTER.
Title Edit
(Delete Part)
menu
appears
on
the TV
screen.
Play
'Start Point' icon is
Chapter
Title Edit
TITLE 1
Delete Part
15/05 0:35:42
highlighted.
Delete
Start
Protect
Edit
Start Point
End Point
Playlist Add
End
00:00.00
Cancel
Done
Select
Move Point
Close
Dubbing
Starts
3
4
pressing ENTER,
displayed.
5
6
?
Repeat steps
will appear.
1
-
pause step, search and
ENTER at
updated
menu
of
want to
'End Point' icon is
The
is
4 to continue to delete from the
menu.
part is
highlighted.
indicated on the Progress
Use pause step, search,
to find the ending point.
7
Press
8 you
ENTER at the
skip
Bar.
and slow-motion
ending point
of the section
want to delete.
Press RETURN
(O) repeatedly
You
to exit the
can
cancel the selected
point,
use
menu.
select 'Cancel' icon then press ENTER.
ote
If you finish to
press ENTER.
9
When DVD+RW
changed
?
deleting
the new,
use
to
Use b / B to select 'OK' then press ENTER.
The selected chapter or title is deleted.
After
and
5 slow-motion find the starting point.
Press
the starting point
the section
6 you
delete.
Press ENTER to confirm.
The confirm message for
playback
recording,
are
name
more
combined into
than two
are
continued, the
edit, select 'Done' icon then
The confirm message for
is
to 'Deleted Title'.
If the deleted titles
titles
the deleted title's
v / V to
deleting
will appear.
10
Use b / B to select 'OK' then press ENTER.
The selected part is deleted from the title.
11
When finished
one.
editing, press
RETURN
(O).
57
EDITNG
Title and
Naming
You
can name
titles
+RW
Video
independently.
Names
+R
can
be up to
long.
on
appears
the left side of the
Use v/V to select 'Title Name'
VR
Two
+RW
menu
option
then press
appears.
e.g., If you select "Title Name"
on
Title
Original chapters
Chapters
List-Original
+R
into
adjacent Playlist
one
chapter
1
On the
Chapter List menu, select the second
chapter of the two chapters you want to combine then press ENTER.
Chapter List options appears
on
Play
Chapter
Use v / V to select 'Combine'.
2
e.g., If you select "Combine"
Edit
Original
Title Name
the left side of the
The combine indicator appears between the two
chapters you want to combine.
Protect
Add
only
within the title.
menu.
Playlist
or
one.
This function is not available if there is
menu.
Delete
Into One
ote
menu.
ENTER.
Keyboard
Combining
Use this function to combine two
On the Title List menu, use vVbBto choose
the title you want to name then press ENTER.
Options
2
VR
Title
a
32 characters
1
Chapter Editing (Continued)
on
Chapter
List-
menu.
Delete Part
Play
Dubbing
Title
Delete
3
Enter
for the title. Use vVbBto select
a name
Combine
character then press ENTER to confirm your
selection. Refer step 3 as shown on page 21
a
Playlist Add
(Station Rename).
3
Language
Press ENTER to confirm.
After
pressing ENTER,
displayed.
the new,
updated
menu
is
English/Latin Capital
123456789
ABCDEFGH
I
Repeat steps
4 the
0
J
KLMNOPQRST
5
UVWXYZ
Space
Delete
OK
1
-
3 to continue to combine from
menu.
Press RETURN
(O) repeatedly
to exit the
menu.
ote
Cancel
This function cannot operate listed below;
4
Choose OK then press ENTER to fix the
and return to the previous menu screen.
5
Press RETURN
(O) repeatedly
name
?
?
to exit the
?
menu.
?
otes
?
?
?
Names
be up to 32 characters long.
For discs formatted on a different DVD Recorder, you
will see only a limited character set.
When
recording
entered
after
58
can
name
finalizing.
is
in
DVD-R, DVD+R
displayed
on
or
the DVD
DVD+RW, the
player only
If there is
only one chapter within the title.
If two chapters created by erasing a part from an
original title.
If two chapters created from different titles.
If two chapters created by moving an order from an
original title.
Title and
Moving
Chapter Editing (Continued)
VR
Playlist Chapter
a
Protect
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
1
Press DISC MENU / LIST
repeatedly
to
display
Title
List-Playlist menu.
To display the Chapter List-Playlist menu,
"Using the Chapter List-Playlist Menu" on
or
deleting
1
2
ote
This function is not available if there is
Chapter List
only
one
chapter.
3
VR
Title
Use this function to
refer to
page 51.
a
+RW
+R
protect accidental recording, editing
of the title.
Press DISC MENU / LIST to
display
Title List
menu.
Use vVbBto choose
a
title you want to pro-
tect then press ENTER.
Options appears on the left side of the
Select 'Protect'
option
on
the
screen.
options.
TITLE 1
e.g., If you select "Protect"
16/05/2004 Sun 0:03:31
Playlist
on
Title List
menu.(DVD+RW/+R)
1/9
Play
Full
Select
LIST
Chapter
Close
Original
Play
Delete
2
Select
a
chapter
from the
Chapter List-Playlist
Protect
menu.
Edit
Press ENTER.
3 Chapter List-Playlist options
side of the
appears
on
the left
Dubbing
menu.
Use v / V to select 'Move' from
4 options then press
Playlist
4
ENTER.
Press ENTER to confirm.
The lock mark will appears
on
the title's thumbnail.
ip
Play
If you select a title that has already been protected on
the Title List menu, you can unprotect it by choosing
"Unprotect" from the Title List menu options. After doing
Title
Delete
this, you
Move
can
edit and delete the title.
Combine
5
Use vVbBto choose the
you want to
move the chapter to then press ENTER.
After pressing ENTER, the new, updated menu is
place
displayed.
6
7
Repeat steps
2
-
5 to continue to
move
from the
menu.
Press RETURN
(O) repeatedly
to exit the
menu.
59
EDITNG
Title and
Hide
Chapter Editing (Continued)
Use this function to hide
Chapter
or
1
2
+RW
Title/Chapter
a
List
a
Divide One Title Into Two
+R
title/chapter
on
the Title List
menu.
On the Title List
Chapter
or
vVbBto choose
Select 'Hide'
option
on
The
a
the
options.
split
a
title up into two
On the Title List menu, select
divide then press ENTER.
1
List menu,
title or chapter you
want to hide then press ENTER.
Options appears on the left side of the screen.
use
Use this command to
menu
options
+RW
appears
on
a
new
titles.
title you want to
the left side of the
screen.
2
Select 'Divide' from the Title List
menu
options.
Play
e.g., If you select "Hide"
on
Title List
Full
menu.
Chapter
Play
Full
Play
Delete
Play
Protect
Title Name
Delete
Edit
Divide
Protect
Title Name
Dubbing
Hide
Edit
Divide
Chapter
3
Hide
Dubbing
Press ENTER when 'Divide'
option
is
highlight-
ed.
Title Edit-Divide
menu
appears and goes into STOP
mode.
3
Press ENTER to confirm.
The title's thumbnail will be dim.
Current
ip
Title Edit
Divide
If you select a title that has already been dim on the
Title List menu, you can show it by choosing "Show"
from the Title List
can see
menu
options.
After
doing this,
picture
TITLE 1
16/05 00:35:42
The first title's
thumbnail
#1
you
the title.
The second title's
thumbnail
Divide
0:00:00.00
Cancel
Select
Done
Move Point
Close
4
Use pause step, search, skip and slow-motion
to find the point you want to divide the title.
5
When 'Divide'
ENTER at the
You
can
option
point.
clear the
is
highlighted, press
dividing point
and exit the Title
Edit-Divide menu, use v / V to select 'Cancel'
option then press ENTER. The dividing point is
clear.
6
Choose 'Done'
the
option
dividing point.
then press ENTER to fix
The title is divided into two
4 minutes to divide.
60
new
titles. It take up to
Additional Information
Overwrite
To overwrite
Recording
video
a new
recorded
recording
follow these
to
a
+RW
This feature is not
1
You
2
you want to record
Press DISC MENU / LIST to
display
+R
view the Title List
can
another DVD
(chan-
the Title List
1
2
1/12
displayed on
capable of playing
menu
that is
player
the
DVD+RW
EDITNG
DVD+R discs.
or
menu.
Title List
menu
at the end of
the Disc.
input source
nel, AV1-3, DV).
displayed
recorders or players
other DVD
on
previously
title,
steps.
available on DVD+R, which always record
Select
Title List
Viewing
+RW
Insert DVD+R
or
DVD+RW disc recorded
already.
Press TITLE button.
Title List
will appear
menu
as
below.
DVD+RW
TITLE 1
5hour 36min
7/12
TITLE 2
0:16:00
9/12
TITLE 3
0:35:00
10/12
0:30:00
ip
Free
SP
You
TITLE 4
13/12
TITLE 5
0:08:00
16/12
STOP
TITLE 6
0:10:00
19/12
the Title List
can remove
menu
by pressing
(x).
0:15:00
DVD+RW
Select
3
4
DISPLAY
Info
REC
Use vVbBto choose
Close
a
Title List
title you want to
overTITLE 1
write.
TITLE 2
0:16:00
7/12
TITLE 3
0:35:00
9/12
0:30:00
10/12
Press REC
Overwrite
(z) to start overwrite recording.
recording is started from the start point
of
TITLE 4
the title.
TITLE 5
0:08:00
13/12
TITLE 6
0:10:00
16/12
0:15:00
19/12
1/2
5
Press STOP
The
new
(x)
to
stop the overwrite recording.
title is created and
updated
menu
is dis-
played.
3
To
play
back
a
title, select the title you
then press ENTER
N
or
want
(PLAY).
otes
This function is not available with
If the
protected title.
than the recording
a
Playing Your Recordings on
Players (Finalizing a Disc)
other DVD
overwriting is elapsed more
length of the current title, the next title is overwrited.
But if next title is protected, the overwriting is stopped
at the starting point of the title.
If the selected title's recording length is less than 10
recorded in Video
mode, finalized DVD+R
A small number of
seconds, the
players
recorded in VR
protected,
next title is overwrited. But if next title is
the
overwriting
is
stopped.
Most
DVD
regular
al that
came
can
play
also
or
player
finalized discs
play
or
DVD+RW.
DVD-RW discs
not. Check the
manu-
to check what kinds
play.
'fixes' the
that the disc
can
mode, finalized
with the other
of discs it will
Finalizing
players
can
be
recordings and editings in place
played on a regular DVD player
computer equipped with
a
Finalizing a Video mode
navigating the disc. This
disc creates
a menu screen
is accessed
by pressing
MENU / LIST
To finalize
a
or
so
or
suitable DVD-ROM drive.
for
DISC
TITLE.
disc, refer
to "Finalize"
on
page 28.
otes
Unfinalized DVD+RW is
playable
on
regular
DVD
players.
The edited contents of DVD+RW disc is
compatible
finalizing.
regular DVD players only after
Any edited contents of the DVD+R disc are not be
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
on
61
Language Code
Enter the
appropriate
(See page 23).
List
code number for the initial
settings
"Disc
Audio", "Disc Subtitle" and/or "Disc Menu"
Code
Language
Code
Language
Code
Language
Code
Language
6566
Abkhazian
7074
Fiji
7678
Lingala
8373
Singhalese
6565
Afar
7073
Finnish
7684
Lithuanian
8375
Slovak
6570
Afrikaans
7082
French
7775
Macedonian
8376
Slovenian
8381
Albanian
7089
Frisian
7771
Malagasy
8379
Somali
6577
Amharic
7176
Galician
7783
Malay
6983
Spanish
6582
Arabic
7565
Georgian
7776
Malayalam
8385
Sudanese
7289
Armenian
6869
German
7784
Maltese
8387
Swahili
6583
Assamese
6976
Greek
7773
Maori
8386
Swedish
6588
Aymara
7576
Greenlandic
7782
Marathi
8476
Tagalog
6590
Azerbaijani
7178
Guarani
7779
Moldavian
8471
Tajik
6665
Bashkir
7185
Gujarati
7778
Mongolian
8465
Tamil
6985
Basque
7265
Hausa
7865
Nauru
8484
Tatar
6678
Bengali; Bangla
7387
Hebrew
7869
Nepali
8469
Telugu
6890
Bhutani
7273
Hindi
7879
Norwegian
8472
Thai
6672
Bihari
7285
Hungarian
7982
Oriya
6679
Tibetan
6682
Breton
7383
Icelandic
8065
Panjabi
8473
Tigrinya
6671
Bulgarian
7378
Indonesian
8083
Pashto, Pushto
8479
Tonga
7789
Burmese
7365
Interlingua
7065
Persian
8482
Turkish
6669
Byelorussian
7165
Irish
8076
Polish
8475
Turkmen
7577
Cambodian
7384
Italian
8084
Portuguese
8487
Twi
6765
Catalan
7465
Japanese
8185
Quechua
8575
Ukrainian
9072
Chinese
7487
Javanese
8277
Rhaeto-Romance
8582
Urdu
6779
Corsican
7578
Kannada
8279
Romanian
8590
Uzbek
7282
Croatian
7583
Kashmiri
8285
Russian
8673
Vietnamese
6783
Czech
7575
Kazakh
8377
Samoan
8679
Volapuk
6865
Danish
7589
Kirghiz
8365
Sanskrit
6789
Welsh
7876
Dutch
7579
Korean
7168
Scots Gaelic
8779
Wolof
6978
English
7585
Kurdish
8382
Serbian
8872
Xhosa
6979
Esperanto
7679
Laothian
8372
Serbo-Croatian
7473
Yiddish
6984
Estonian
7665
Latin
8378
Shona
8979
Yoruba
7079
Faeroese
7686
Latvian, Lettish
8368
Sindhi
9085
Zulu
62
Area Code List
Enter the
appropriate
code number for the initial
setting
"Area Code"
(See
page
26).
Code
Country
Code
Country
Code
Country
Code
AD
Andorra
ER
Eritrea
LC
Saint Lucia
SC
Country
Seychelles
AE
United Arab Emirates
ES
Spain
LI
Liechtenstein
SD
Sudan
AF
ET
Ethiopia
LK
Sri Lanka
SE
Sweden
AG
Afghanistan
Antigua and
FI
Finland
LR
Liberia
SG
Singapore
AI
Anguilla
FJ
Fiji
LS
Lesotho
SH
Saint Helena
AL
Albania
FK
Falkland Islands
LT
Lithuania
SI
Slovenia
AM
Armenia
FM
Micronesia
LU
Luxembourg
SJ
Svalbard and Jan
AN
Netherlands Antilles
FO
Faroe Islands
LV
Latvia
AO
Angola
FR
France
LY
Libya
SK
Slovak
AQ
Antarctica
FX
France
MA
Morocco
SL
Sierra Leone
AR
Argentina
(European
Territory)
MC
Monaco
SM
San Marino
AS
American Samoa
GA
Gabon
MD
Moldavia
SN
Senegal
AT
Austria
GB
Great Britain
MG
Madagascar
SO
Somalia
AU
Australia
GD
Grenada
MH
Marshall Islands
SR
Suriname
AW
Aruba
GE
MK
Macedonia
ST
Saint Tome and
AZ
Azerbaidjan
GF
Georgia
French Guyana
ML
Mali
SU
Former USSR
BA
Bosnia-Herzegovina
GH
Ghana
MM
SV
El Salvador
BB
Barbados
GI
Gibraltar
MN
Myanmar
Mongolia
SY
Syria
BD
Bangladesh
GL
Greenland
MO
Macau
SZ
Swaziland
BE
Belgium
GM
Gambia
MP
Northern Mariana Islands
TC
Turks and Caicos Islands
BF
Burkina Faso
GN
Guinea
MQ
Martinique (French)
TD
Chad
BG
Bulgaria
GP
MR
Mauritania
TF
French Southern
BH
Bahrain
GQ
Guadeloupe (French)
Equatorial Guinea
MS
Montserrat
BI
Burundi
GR
Greece
MT
Malta
TG
Togo
BJ
Benin
GS
S.
MU
Mauritius
TH
Thailand
BM
Bermuda
Isls.
MV
Maldives
TJ
Tadjikistan
BN
Brunei Darussalam
GT
Guatemala
MW
Malawi
TK
Tokelau
BO
Bolivia
GU
Guam
MX
Mexico
TM
Turkmenistan
BR
Brazil
GW
Guinea Bissau
MY
TN
Tunisia
BS
Bahamas
GY
MZ
TO
Tonga
BT
Bhutan
HK
Guyana
Hong Kong
Malaysia
Mozambique
AN
Namibia
TP
East Timor
BV
Bouvet Island
HM
Heard and McDonald
NC
New Caledonia
TR
Turkey
BW
Botswana
Islands
NE
Niger
TT
Trinidad and
BY
Belarus
HN
Honduras
NF
Norfolk Island
TV
Tuvalu
BZ
Belize
HR
Croatia
NG
Nigeria
TW
Taiwan
CA
Canada
HT
Haiti
NI
Nicaragua
TZ
Tanzania
CC
Cocos
HU
Hungary
NL
Netherlands
UA
Ukraine
CF
(Keeling) Islands
Central African Republic
ID
Indonesia
NO
Norway
UG
Uganda
CG
Congo
IE
Ireland
NP
Nepal
UK
United
CH
Switzerland
IL
Israel
NR
Nauru
UM
USA
CI
Ivory
Coast
IN
India
NU
Niue
CK
Cook Islands
IO
British Indian Ocean
NZ
New Zealand
US
United States
CL
Chile
Territory
OM
Oman
UY
Uruguay
CM
Cameroon
IQ
Iraq
PA
Panama
UZ
Uzbekistan
CN
China
IR
Iran
PE
Peru
VA
Vatican
CO
Colombia
IS
Iceland
PF
VC
Saint Vincent &
CR
Costa Rica
IT
Italy
PG
Polynesia (French)
Papua New Guinea
CS
Former Czechoslovakia
JM
Jamaica
PH
Philippines
VE
Venezuela
CU
Cuba
JO
Jordan
PK
Pakistan
VG
CV
Cape
JP
Japan
PL
Poland
VI
Virgin
Virgin
CX
Christmas Island
KE
PM
Saint Pierre and
VN
Vietnam
CY
Cyprus
KG
Kenya
Kyrgyzstan
PN
Pitcairn Island
VU
Vanuatu
CZ
Czech
KH
Cambodia6
PR
Puerto Rico
WF
Wallis and Futuna Islands
KI
Kiribati
PT
Portugal
WS
Samoa
DJ
Republic
Germany
Djibouti
KM
Comoros
PW
Palau
YE
Yemen
DK
Denmark
KN
Saint Kitts & Nevis
PY
Paraguay
YT
DM
Dominica
KP
North Korea
QA
Qatar
YU
Mayotte
Yugoslavia
DO
Dominican
KR
South Korea
RE
Reunion
ZA
South Africa
DZ
Algeria
KW
Kuwait
RO
Romania
ZM
Zambia
EC
Ecuador
KY
Cayman
RU
Russian Federation
ZR
Zaire
EE
Estonia
KZ
Kazakhstan
RW
Rwanda
ZW
Zimbabwe
EG
Egypt
LA
Laos
SA
Saudi Arabia
EH
Western Sahara
LB
Lebanon
SB
Solomon Islands
DE
Barbuda
Verde
Republic
Georgia
& S. Sandwich
(USA)
Islands
Anguilla
Mayen
Islands
Republic
Principe
Te rritories
(French)
Tobago
Kingdom
Minor Outlying
Islands
Miquelon
(French)
City
State
Grenadines
Islands
Islands
(British)
(USA)
63
REF NC
Your TV with the
Controlling
You
source, and
power switch of your LG TV with the supplied remote.
can
control the sound
level, input
Controlling
You
You
can
control your TV
using
Remote
Supplied
the buttons below.
can
other TVs with the remote
control the sound
source, and
well. If your TV is listed
level, input
power switch of non-LG TVs as
in the table below, set the appropriate manufacturer
code.
1.
While
down TV POWER button, press
the number buttons to select the manufacturer
holding
code for your TV
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
TV Control
Buttons
If
more
them
than
one
at
one
code number is
listed, try entering
time until you find the
a
one
that works with
your TV.
DUBBING
By pressing
You
POWER
Turn the TV
AV
can
on or
Switch the TV's
off.
input
source
input
sources.
VOL +/--
Scans up or down through
memorized channels.
Adjust
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
the volume of the TV.
Depending
on
function
the
2
on
your TV,
TV,
some or
even
after
all buttons may not
entering
the correct
manufacturer code.
If you enter a new code number, the code number
previously entered will be erased.
When you
replace
the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
64
(Default),
otes
between the TV and other
PR +/--
Manufacturer
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Solution
Cause
Symptom
No power.
The power cord is disconnected.
Plug the power
securely.
No
The TV is not set to receive Recorder
Select the
signal output.
on
picture.
the TV
cord into the wall outlet
appropriate video input
so the picture from the
Recorder appears
The video cable is not connected
on
the TV
Connect the video cable
mode
screen.
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
audio cable is not set to receive
Recorder
audio receiver
are
input
mode
the
on
you can listen to the
sound from the Recorder.
signal output.
The audio cables
the TV.
on
not connected
so
Connect the audio cable
securely.
securely.
The
playback picture
is
The power of the equipment connected
with the audio cable is turned off.
Turn
The audio
Replace
connecting
The disc is
cord is
damaged.
the
on
connected with
equipment
the audio cable.
it with
new one.
Clean the disc.
dirty.
poor.
The Recorder does not
start
No disc is inserted.
Insert
a
disc.
An
Insert
a
playable
playback.
unplayable
disc is inserted.
(Check the disc
system, and regional code.)
type, color
The disc is
placed upside
down.
disc.
Place the disc with the
side
playback
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
the
The
picture from the
external input is distort-
The video
ponent is
signal from the
copy-protected.
external
com-
ed
tray correctly
Rating
function
or
change
rating level.
You cannot connect via this recorder.
Connect the
component directly
to your
TV.
Some channels
skipped over
usingv/V.
are
when
Those channels
are
Aerial
Camcorder
Camcorder is off.
is not
or
cables
are
loose.
shown.
input
or
image
via
DV IN to
Recorder is not shown
TV
"Program
Edit"
pages 20-21.
Tighten
connections
Turn camcorder
on
replace
or
and
cable.
operate
properly.
Camcorder
A/V
Restore channels. See
on
picture or sound of
broadcasting channel is
weak or missing.
image
not stored in the
recorder.
The
on
the disc
guide.
The disc is
Rating
on
Recorder INPUT SELECT is
incorrect.
Use AV to select
input
AV2, AV3, DV, etc.)
channel
(AV1,
screen.
65
REF NC
Troubleshooting (Continued)
The disc
Can't
play a disc
recorded using this
recorder
on
Solution
Cause
Symptom
Some
another
was
recorded in Video mode.
Finalize the disc.
will not
No solution.
players
play
final-
even a
ized disc recorded in Video mode.
player.
The disc
was
recorded in VR
The other
mode,
player must
order to play it.
ble in
Cannot record
not record
or
did
successfully.
Discs recorded with copy-once material
cannot be played on other players.
No solution.
The
Use another disc.
blank space
remaining
source
copy
are
you
setting
the
channel is tuned
When
to record is
trying
recording
recording channel,
on
to
the TV's
a
own
Video mode
programs that are copy-once
cannot be recorded.
is not
the
disc,
Use
VR mode formatted disc for copymaterial.
once
a
time.
Set"
TV is not
present.
the recorder's
on
Set clock to correct time. See "Clock
appear after
is not
Select the channel
built-in TV tuner.
protected
programmed
page 22.
on
Reprogram
Recording"
Timer record indicator
Playback
source.
tuner.
incorrectly.
and/or
You cannot record the
Clock in Recorder is not set to correct
Timer has been
Stereo Audio Record
compati-
protected.
When
recording
possible.
the disc
on
be RW
is insufficient.
The
Timer
(page 28)
light does
programming timer.
not
Reprogram
Stereo-compatible.
No solution.
Broadcast program is not in stereo for-
No solution.
Timer. See "Timer
page 46-47.
on
Timer.
mat.
Recorder A/V Out
ed to TV A/V In
jacks
jacks.
are
not connect-
Make A/V connections. Stereo is
available
only
via A/V
output from
Recorder.
Recorder Audio/Video Out is not selected for
viewing
Select AUX
or
A/V
source as
TV
input.
at the TV.
Recorder's TV audio channel is set to
Set TV audio channel mode to Stereo.
mono.
See
"Changing
TV audio channel"
on
page 30.
The remote control
The remote control is not
does not work
remote
properly.
sensor
pointed
at the
of the Recorder.
Point the remote control at the remote
sensor
The remote control is too far from the
of the Recorder.
Operate
the remote control within 7
m.
Recorder.
There is
an
obstacle in the
path
of the
Remove the obstacle.
remote control and the Recorder.
The batteries in the remote control
are
Replace
the batteries with
new ones.
exhausted.
Moisture Condensation
Moisture condensation
?
When the Recorder is moved from
warm
In locations where moisture condensation may
can occur:
a
cold
place
to
a
?
Under
66
extremely
the Recorder
with POWER On.
place.
?
?
Keep
humid conditions.
occur:
plugged into an AC power outlet
This will help prevent condensation.
When condensation has
for the Recorder to
dry
occurred, wait
before
using
it.
a
few hours
Specifications
General
Power
AC
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Television
110-240V, 50/60 Hz
35W
430 X 78.5 X 354
5.7
(w
x
h
x
d)
kg
5˚C to 35˚C
REF NC
5 % to 90 %
system
PAL
format
PAL
Recording
mm
B/G, PAL I/I, SECAM D/K colour system
System
Laser
Semiconductor
laser, wavelength 650 nm
Double azimuth 4 heads, helical scanning
Video head
system
Signal system
PAL
Recording
Recording
format
DVD
Recordable discs
VideoRecording,
DVD-VIDEO
DVD-ReWritable, DVD-Recordable, DVD+ReWritable, DVD+Recordable
DVD+Recordable
(Double Layer)
DVD (4.7GB) : Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
DVD+R DL (8.5GB) : Approx. 1 hour 50 minutes (XP mode), 3 hours
40 minutes (SP mode), 7 hours 10 minutes (LP mode), 11 hours (EP mode)
Recordable time
Video
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
27MHz
MPEG 2
48kHz
Dolby Digital
Playback
Frequency
DVD
(PCM 48 kHz): 8 Hz to 22 kHz, CD: 8
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
Hz to 20 kHz
Inputs
AERIAL IN
Aerial
input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 1 / SCART x 2
0dBm morethan47kohms,RCAjack(L,R)x1/SCARTx2
4 pin (i.LINK/IEEE 1394 standard)
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin x 1
(C)0.3V(p-p)75Ω
VIDEO IN
AUDIOIN
DV IN
S-VIDEO IN
Outputs
VIDEO OUT
1.0
S-VIDEO OUT
Audio
output (digital audio)
Audio output (optical audio)
Audio output (analog audio)
and
specifications
are
75
ohms, sync negative, SCART
x
2
(Y) 1.0 V (p-p), 75 Ω, negative sync, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
0.5 V (p-p), 75 Ω, RCA jack x 1
3 V (p-p), 75 Ω, Optical connector x 1
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
COMPONENT VIDEO OUT
Design
Vp-p
subject
Manufactured under license from
to
Dolby
change
x
1
/ SCART
without notice.
Laboratories.
"Dolby"
and the double-D
symbol
are
trademarks of
Dolby
Laboratories.
DTS and DTS
Digital
Out
are
registered
trademarks of
Digital
Theater
Systems,
Inc.
67
P/NO
:
3834RV0027W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising