LG DKS-7000Q Owner's manual

MOSCOW_DKS-7000_ENG-MFL39518823
DVD KARAOKE SYSTEM
OWNER’S MANUAL
MODEL : DKS-7000Q (DKS-7000)
CD - R/RW
R
USB
Please read this manual carefully before operating your set.
Retain it for future reference.
Designs and specifications are subject to change without
notice for improvement.
The working life of this product is 7 years since the date of
purchase.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
CAUTION:
This Digital Video Disc Player employs a Laser System.
To ensure proper use of this product, please read this owner’s
manual carefully and retain for future reference, should the unit
require maintenance, contact an authorized service locationsee service procedure.
Use of controls, adjustments or the performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
To prevent direct exposure to laser beam, do not try to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
CAUTION: The apparatus shall not be exposed to water,
dripping or splashing and that no objects filled with liquids,
such as vases, shall be placed on the apparatus.
2
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit;
That is, a single outlet circuit which powers only that appliance
and has no additional outlets or branch circuits. Check the
specification page of this owner's manual to be certain.
Do not overload wall outlets. Overloaded wall outlets, loose or
damaged wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous. Any of
these conditions could result in electric shock or fire.
Periodically examine the cord of your
appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the
cord replaced with an exact replacement part by an authorized
servicer.
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets, and
the point where the cord exits the appliance.
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is
attached to a product it means the product is
covered by the European Directive
2002/96/EC.
2. All electrical and electronic products should be
disposed of separately from the municipal
waste stream via designated collection facilities
appointed by the government or the local
authorities.
3. The correct disposal of your old appliance will
help prevent potential negative consequences
for the environment and human health.
4. For more detailed information about disposal of
your old appliance, please contact your city
office, waste disposal service or the shop
where you purchased the product.
Introduction
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Table of Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Notes on Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-5
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
About Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Front Panel and Rear Panel. . . . . . . . . . . . . . . . . . . . . . . . 6
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Preparation
Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-9
Connecting to a TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Connecting to Optional Equipment . . . . . . . . . . . . . . . . 9
Before Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15
Mini Glossary for Audio Stream & Surround Mode . . . . 10
Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
General Explanation. . . . . . . . . . . . . . . . . . . . . . . . . . . 11
On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-15
General Operation. . . . . . . . . . . . . . . . . . . . . . . . . 12
LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
DISPLAY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
LOCK (Parental Control) . . . . . . . . . . . . . . . . . . . . 14
OTHERS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Operation with Audio CD and MP3/WMA Disc . . . . . . . . 18
Playing an Audio CD and MP3/WMA Disc . . . . . . . . . . 18
Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Moving to another Track . . . . . . . . . . . . . . . . . . . . 18
Repeat Track/ All/ Off . . . . . . . . . . . . . . . . . . . . . . 18
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Operation with JPEG Disc . . . . . . . . . . . . . . . . . . . . . . . 19
Viewing a JPEG disc . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Moving to another File. . . . . . . . . . . . . . . . . . . . . . 19
Still Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Programmed Playback . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Repeat Programmed Tracks . . . . . . . . . . . . . . . . . 20
Erasing a Track from Program List. . . . . . . . . . . . . 20
Erasing the Complete Program List . . . . . . . . . . . . 20
Operation with DivX Disc . . . . . . . . . . . . . . . . . . . . . . . . 21
Operation with KARAOKE . . . . . . . . . . . . . . . . . . . . . 22-26
Karaoke Basic Playback . . . . . . . . . . . . . . . . . . . . . . . 22
Karaoke Advanced Playback. . . . . . . . . . . . . . . . . . 22-23
Karaoke MENU Playback . . . . . . . . . . . . . . . . . . . . 23-26
SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
MUSIC LIST. . . . . . . . . . . . . . . . . . . . . . . . . . . 24-25
RANDOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
CHALLENGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Reference
Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Country Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Troubleshooting / Specifications
Operation
Operation with DVD . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17
Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
General Features . . . . . . . . . . . . . . . . . . . . . . . . . . 16-17
Moving to another TITLE . . . . . . . . . . . . . . . . . . . . 16
Moving to another CHAPTER/TRACK . . . . . . . . . . 16
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Still Picture and Frame-by-Frame Playback . . . . . . 16
Slow Motion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Repeat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Repeat A-B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Marker Search . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Special DVD Features . . . . . . . . . . . . . . . . . . . . . . . . . 17
Title Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Disc Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Changing the Audio Language. . . . . . . . . . . . . . . . 17
Changing the Audio Channel . . . . . . . . . . . . . . . . . 17
Subtitle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
About the symbols for instructions
Indicates hazards likely to cause harm to the unit itself or
other material damage.
Indicates special operating features of this unit.
Indicates tips and hints for making the task easier.
3
INTRODUCTION
Table of Contents
Before Use
Disc-related terms
Playable Discs
Title (DVD only)
The main film content or accompanying feature content
or additional feature content, or music album.
Each title is assigned a title reference number enabling
you to locate it easily.
DVD
(8 cm / 12 cm disc)
Audio CD
(8 cm / 12 cm disc)
In addition, this unit can play a DVD±R, DVD±RW, and
CD-R or CD-RW that contains audio titles, MP3, WMA,
JPEG or DivX files.
Notes
– Depending on the conditions of the recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
– Do not attach any seal or label to either side (the
labeled side or the recorded side) of a disc.
– Do not use irregularly shaped CDs (e.g., heart-shaped
or octagonal). It may result in malfunctions.
Regional code of the DVD player and DVDs
This DVD player is designed and manufactured for playback of region “5” encoded DVD software. The region
code on the labels of some DVD discs indicates
which type of player can play those discs. This
unit can play only DVD discs labeled “5” or
“ALL”. If you try to play any other discs, the message “Check Regional Code” will appear on the TV
screen. Some DVD discs may not have a region code
label even though their playback is prohibited by area
limits.
5
ote on DTS-encoded CDs
When playing DTS-encoded CDs, excessive audio level
may be heard from the analog stereo output. To avoid
possible damage to the audio system, turn down the
volume before playing back such discs, adjust the volume gradually, and keep the volume level low. To enjoy
DTS Digital SurroundTM playback, an external 5.1 channel DTS Digital SurroundTM decoder system must be
connected to the digital output of the unit.
4
Chapter (DVD only)
Sections of a picture or a musical piece that are smaller
than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number,
enabling you to locate the chapter you want. Depending
on the disc, chapters may not be recorded.
Notes on Discs
Handling discs
Do not touch the playback side of the disc.
Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct sunlight, as there may be a considerable temperature
increase inside the car.
Before Use (Cont’d)
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the center out.
About Symbols
About the
symbol display
“
” may appear on the TV screen during operation.
This icon means the function explained in this owner’s
manual is not available on that specific DVD video disc.
About the disc symbols for instructions
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
Precautions
Handling the unit
When shipping the unit
The original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
When setting up the unit
The picture and sound of a nearby TV, VCR, or radio
may be distorted during playback. In this case, position
the unit away from the TV, VCR, or radio, or turn off the
unit after removing the disc.
To keep the exterior surfaces clean
Do not use volatile liquids, such as insecticide spray,
near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.
A section whose title has one of the following symbol is
applicable only to the disc represented by the symbol.
DVD DVD
CD
Audio CDs
MP3 MP3 disc
WMA WMA disc
JPEG JPEG disc
DivX DivX disc
Features
System Select
You must select the appropriate system mode for your TV
system. If NO DISC appears in the display window, press
and hold PLAY/PAUSE ( N /X) on the front panel for
more than 5 seconds to be able to select a system (PAL,
NTSC, or AUTO).
• When the selected system does not coincide with the
system of your TV, normal color picture may not be
displayed.
AUTO: Select when DVD player is connected with
Multi system TV.
NTSC: Select when DVD player is connected with
NTSC-TV.
PAL:
Select when DVD player is connected with
PAL-TV.
Cleaning the unit
Last Scene Memory
To clean the cabinet
Use a soft, dry cloth. If the surfaces are extremely dirty,
use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.
This player memorizes the user settings for the last disc
that you have viewed. Settings remain in memory even
if you remove the disc from the player or switch off the
player. If you load a disc that has its settings memorized, the latest stop position is automatically recalled.
To obtain a clear picture
The DVD player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality will be poor.
Regular inspection and maintenance are recommended
after every 1,000 hours of use. (This depends on the
operating environment.)
For details, please contact your nearest dealer.
DVD
Notes
– Settings are stored in memory for use any time.
– This player does not memorize settings of a disc if you
switch off the player before commencing to play it.
Screen Saver
The screen saver picture appears when you leave the
DVD Player in stop mode for about five minutes.
After the Screen Saver has been engaged for about five
minutes, the DVD Player will automatically turn itself off.
5
INTRODUCTION
Cleaning discs
Front Panel and Rear Panel
POWER ( STANDBY/ON)
Switches the player ON and OFF.
CHORUS
When a Song with chorus function is played, use this button.
Display window
Shows the current
status of the player.
Z OPEN/CLOSE
Opens or closes the disc tray.
Disc Tray
Insert a disc here.
Microphone jacks (MIC1, MIC2)
Connect a microphone to MIC1 or
MIC2 or to both sockets.
USB host
Connect to a USB port of multimedia
(USB memory etc.)
COAXIAL (Digital audio out jack)
Connect to digital (coaxial) audio equipment.
AUDIO OUT (Left/Right)
Connect to an amplifier, receiver,
or stereo system.
VIDEO OUT
Connect to a TV with
video inputs.
PLAY/PAUSE ( N /X)
Starts playback. Pauses playback.
Reverse Skip (.)
Go to previous chapter / track or to
the beginning.
Forward Skip (>)
Go to the next chapter / track.
STOP ( x )
Stops playback.
5.1 CHANNEL AUDIO OUT
Connect to a 5.1 channel receiver
– center speaker connection
– subwoofer connection
– front speakers connections
– rear (surround) speakers connections
OUTPUT (TV) EURO AV socket
Connect to a TV with SCART jack.
VIDEO OUTPUT SELECTOR switch
Select either COMPONENT VIDEO OUT/PROGRESSIVE
SCAN or SCART signal of EURO AV terminal depending on
how you connect the unit to the TV.
COMPONENT VIDEO OUT/PROGRESSIVE SCAN (Y Pb Pr)
Connect to a TV with Y Pb Pr inputs.
S-VIDEO OUT
Connect to a TV with S-Video inputs.
OPTICAL (Digital audio out jack)
Connect to digital (optical) audio equipment.
AC Power Cord
Plug into the power source.
Caution
– Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage
to the unit.
– Set the VIDEO OUTPUT SELECTOR switch in standby mode in order to use COMPONENT VIDEO OUT/
PROGRESSIVE SCAN or SCART signal of EURO AV terminal .
6
1.
2.
POWER
1
DVD
USB
3.
4.
2
5.
3
6.
PROGRAM
CLEAR
MALE
FEMALE
AUDIO
SOUND
MENU
SHADOW
4
5
CHORUS
15
14
SELECT
/ENTER
6
7.
8.
9.
11.
TEMPO +
8
STOP
PAUSE/STEP
13
PLAY
9
ECHO VOL.
10
DISPLAY
11
12.
TEMPO -
MIC VOL.
ZOOM
TITLE
SUBTITLE
ARROW buttons ( /
/ / )
(For use in highlighting a selection on a GUI menu
screen, TITLE and MENU screen.)
SELECT/ENTER button
KEY CONTROL (b/#) buttons
• STOP (x) button
• PAUSE([])/ STEP button
• PLAY (G) button
10. • ECHO volume control (ECHO VOL.
button
7
b - KEY CON. - #
POWER button
• DVD button
• USB button
NUMERIC buttons (0-9)
• PROGRAM button
• CLEAR button
• AUDIO button
• MALE button
• SOUND button
• FEMALE button
SET UP
REPEAT REPEAT A-B RETURN
12
13.
14.
MARKER - SEARCH
15.
Remote Control Operation Range
Point the remote control at the remote sensor and press
the buttons.
Distance: About 23 ft (7 m) from the front of the
remote sensor
Angle: About 30° in each direction of the front of the
remote sensor
/
)
• Microphone volume control (MIC VOL.
/
)
button
• DISPLAY button
• TITLE button
• REPEAT button
• ZOOM button
• SUBTITLE button
• SET UP button
• REPEAT A-B button
• RETURN button
• MARKER button
• SEARCH button
TEMPO(-/+) buttons
CHORUS button
(When a Song with chorus function is played, use this
button.)
• MENU button
• SHADOW button
Remote control battery installation
Detach the battery cover on
the rear of the remote control, and insert two R03 (size
AAA) batteries with
and
aligned correctly.
Caution
Do not mix old and new batteries. Never mix different
types of batteries (standard, alkaline, etc.).
7
INTRODUCTION
Remote Control
Connections
Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect the player’s
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See “Connecting to Optional Equipment” on page 9.
Caution
– Make sure the DVD Player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player’s AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.
Connecting to a TV
Make one of the following connections, depending on
the capabilities of your existing equipment.
Video connection
the VIDEO OUT jack on the DVD Player to
1 Connect
the video in jack on the TV using the video cable (V).
the Left and Right AUDIO OUT jacks of
2 Connect
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
SCART connection
Connect the EURO AV OUTPUT (TO TV) socket on the
DVD Player to the corresponding in jacks on the TV
using the scart cable (T).
Progressive Scan (ColorStream® pro) connection
If your television is a high-definition or “digital ready”
television, you may take advantage of the DVD
Player’s progressive scan output for the highest
video resolution possible.
If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
1
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using an
optional Y Pb Pr cable (C).
the Left and Right AUDIO OUT jacks of
2 Connect
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
Notes
– Set the Progressive to “On” on the setup menu for
progressive signal, see page 12.
– Progressive scan does not work with the analog video
connections (yellow VIDEO OUT jack).
Rear of TV
S-VIDEO
INPUT
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
Pr
Pb
Y
AUDIO INPUT
R
VIDEO
INPUT
SCART INPUT
L
S-Video connection
1
Connect the S-VIDEO OUT jack on the DVD Player
to the S-Video in jack on the TV using the S-Video
cable (S).
2
Connect the Left and Right AUDIO OUT jacks of
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
C
S
A
Component Video (Color Stream®) connection
Connect the COMPONENT VIDEO OUT/
PROGRESSIVE SCAN jacks on the DVD Player to
the corresponding in jacks on the TV using an Y Pb
Pr cable (C).
1
the Left and Right AUDIO OUT jacks of
2 Connect
the DVD Player to the audio left/right in jacks on the
TV (A) using the audio cables.
Rear of DVD player
8
V
T
Connecting to Optional Equipment
Analog connection to a multi-channel A/V receiver
with 6 Channel connector (Dolby Digital, DTS)
Connecting to an amplifier equipped with two
channel analog stereo or Dolby Pro Logic ll/
Pro Logic
This DVD Player contains a multi-channel decoder. This
enables playback of DVDs recorded in Multi-channel
Surround without the need for an optional decoder.
Connect the Left and Right AUDIO OUT jacks on the
DVD Player to the audio left and right in jacks on your
amplifier, receiver, or stereo system, using the audio
cables (A).
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby Digital™, MPEG 2, or DTS)
Connect one of the DVD Player’s DIGITAL AUDIO OUT
jacks (OPTICAL O or COAXIAL X) to the corresponding
in jack on your amplifier. Use an optional digital (optical
O or coaxial X) audio cable.
1
Connect the CENTER and WOOFER jacks for the
Center speaker and the Subwoofer (C) to the corresponding in jacks on your receiver.
the Left and Right FRONT speaker jacks
2 Connect
(F) to the corresponding in jacks on your receiver.
the Left and Right REAR speaker jacks
3 Connect
(R) to the corresponding in jacks on your receiver.
the appropriate Sound settings for Analog
4 Make
Output and Speaker Settings in the setup menu.
See page 13.
Rear of
DVD player
F
Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that supports one or more of the
audio formats supported by your DVD Player (MPEG 2,
Dolby Digital and DTS). Check the receiver manual and
the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output
will be in DTS digital out when DTS audio stream is
selected.
C
Front L
Rear R
Rear L Subwoofer
Center
ANALOG 5.1CH AUDIO INPUT
R
Amplifier
(Receiver)
Connect to a USB port of multimedia (USB
memory etc.)
1
Rear of DVD player
Front R
Connect the USB port of a USB Memory (or MP3
player, etc.) to the USB HOST on the front of the unit.
Front
player
Front of
of DVD
DVD player
USB
Player(or
(or
USBMemory,
Memory,MP3
MP3 Player
Memory
CardCard
Reader,
etc.)
Memory
Reader,
etc.)
O
X
A
USB function pressing the USB button on
2 Select
the remote control.
OPTICAL
COAXIAL
DIGITAL INPUT
R
L
AUDIO INPUT
Amplifier (Receiver)
Notes
– If the audio format of the digital output does not match
the capabilities of your receiver, the receiver will
produce a strong, distorted sound or no sound at all.
– Six Channel Digital Surround Sound via digital connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
– To see the audio format of the current DVD in the onscreen display, press AUDIO.
otes
The DivX files in your memory card will not be able
to be play.
Don’t insert the more than one memory card in the
multi card reader.
The unit may not be supported a part of memory
card or multi card reader.
Don’t insert or pull out the memory card from the
card reader when using the card reader.
If there is no memory card in the card reader, it will be
displayed “No USB”. In this status you should pull out
card reader and pull into the set again with memory card.
9
PREPARATION
Connections
Before Operation
Mini Glossary for Audio Stream &
Surround mode
Sound Mode
Allows you to enjoy 5.1(or 6) discrete channels of high
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark.
DTS Digital Surround delivers up to 6 channels of
transparent audio(which means identical to the original
masters) and results in exceptional clarity throughout a
true 360 degree sound field. “DTS” and “DTS Digital
Surround” are registered trademarks of Digital Theater
Systems, Inc.
When DVD is inserted
DVD
CD
You can enjoy surround sound simply by selecting one
of the pre-programmed sound fields according to the
program you want to listen to.
You can change the Digital Audio Output mode by
pressing the AUDIO button on the remote control during
playback. Although the DVD contents differ from disc to
disc, the following explains the basic operation when
this feature is used.
a) After you select 2 channel (For example
2 ENG
D
2 CH
or
3 ENG
D
2 CH
) by pressing AUDIO button, press SOUND
button repeatedly.
The sound mode of DVD is changed on the TV screen as
the following order.
The Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital
program source. If you play DVDs with “
” mark, you
can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and double-D symbol are trademarks
of Dolby Laboratories.
Bypass
→
MOVIE
→
MATRIX
→
Bypass
...
b) After you select 5.1 channel (For example
4 ENG
DTS
5.1 CH
-“
MUSIC
1 ENG
D
5.1 CH
→
or
) by pressing AUDIO button, press SOUND button.
” indicator will be displayed on the TV screen.
When CD is inserted
II
Dolby Pro Logic II creates five full-bandwidth output
channels from two-channel sources. This is done using
an advanced, high-purity matrix surround decoder that
extracts the spatial properties of the original recording
without adding any new sounds or tonal colorations.
MOVIE mode:
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby Surround.
The result is enhanced soundfield directionality that
approaches the quality of discrete 5.1-channel sound.
MUSIC mode:
The Music mode is for use with any stereo music
recordings.
MATRIX mode:
The Matrix mode is the same as the Music mode
except that the directional enhancement logic is
turned off. It may be used to enhance mono signals
by making them seem “larger.” The Matrix mode may
also find use in auto systems, where the fluctuations
from poor FM stereo reception can otherwise cause
disturbing surround signals from a logic decoder. The
ultimate “cure” for poor FM stereo reception may be
simply to force the audio to mono.
BYPASS
Outputs the sound from the front left and right speakers
and subwoofer.
10
Each time you press SOUND button, the sound mode
of CD is changed on the display window as the following order.
Bypass → Studio → Club→ Hall→ Thea. 1 → Church →
DD PL II 1 → DD PL II 2 → DD PL II 3 → Bypass...
For your reference
• Intial sound of DVD function is BYPASS.
• You can identify the encoding format of program
software by looking at its packaging.
- Dolby Digital discs are labeled with the
logo.
- Dolby Surround encoded programs are labeled with
the
logo.
- DTS Digital Surround discs are marked with DTS.
ote
When you play sound tracks with 96kHz sampling frequency,
the output signals will be converted to 48kHz (sampling frequency).
Before Operation
Temporary Feedback Field Icons
Title
This manual gives basic instructions for operating the
DVD Karaoke. Some DVDs require specific operation or
allow only limited operation during playback.
When this occurs, the symbol
appears on the TV
screen, indicating that the operation is not permitted by
the DVD Karaoke or is not available on the disc.
A-B
On-screen display operation
Repeat sequence
Resume play from this point
Action prohibited or not available
On-Screen Display
General playback status can be displayed on the TV
screen. Some items can be changed on the menu.
Repeat title
Notes
Some discs may not provide all of the features on the
on-screen display example shown below.
If no button is pressed for 10 seconds, the on-screen
display disappears.
1 Press DISPLAY during playback.
/
to select an item.
2 Press
The selected item will be highlighted.
or to change the setting of an item.
3 Press
The number buttons can be also be used for setting
numbers (e.g., title number). For some functions,
press SELECT/ENTER to execute the setting.
Example: On-Screen Display during playing DVD
Items
Function / Action using
Title Number
Time search
Audio language
and Digital Audio
Output mode
Subtitle language
Angle
Sound
Selection Method
/ , Numbers, or
SELECT/ENTER
1 / 12
Shows the current chapter number and total number of
chapters / skips to the desired chapter number.
/ , Numbers, or
SELECT/ENTER
0:20:09
Shows the elapsed playing time / searches by elapsed
time.
1 ENG
D
5.1 CH
ABC
to select item
Shows the current title number and total number of titles /
skips to the desired title number.
1/3
Chapter Number
/
1 ENG
1/3
Bypass
Shows the current audio soundtrack language,
encoding method, and channel number / changes the
setting.
Shows the current subtitle language / changes the setting.
Numbers, SELECT/ENTER
/ or
AUDIO
/ or
SUBTITLE
Shows the current angle number and total number of
angles / changes the angle.
/
Shows the current sound mode / changes the setting.
/ or
SOUND
11
PREPARATION
General Explanation
Before Operation
DISPLAY
Initial Settings
DISPLAY
By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also
set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu
item, see pages 12 to 15.
To display and exit the Menu:
Press SETUP to display the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press on the remote control.
To go back to the previous level:
Press
on the remote control.
Widescreen
Progressive Scan
Off
TV Aspect
Select
DVD
4:3: Select when a standard 4:3 TV is connected.
16:9: Select when a 16:9 wide TV is connected.
DVD
Display Mode setting works only when the TV Aspect
mode is set to “4:3”.
Press SETUP.
The setup menu appears.
1
2 Use
press
16 : 9
Display Mode
Move
Display Mode
General Operation
TV Aspect
/
to select the desired option then
to move to the second level.
The screen will be shown the current setting for the
selected item, as well as alternate setting(s).
Use
/
to select the second desired option
then press to move to the third level.
3
/
to select the desired setting then
Use
4 press
SELECT/ENTER to confirm your selection.
Some items require additional steps.
5 Press SETUP or PLAY to exit the setup menu.
LANGUAGE
English
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
Move
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
Progressive Scan
DVD
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
To Turn ON progressive scan:
Connect component out of the DVD to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select “Progressive Scan” on the DISPLAY menu
then press .
LANGUAGE
OSD
Letterbox: Displays a wide picture with bands on the
upper and lower portions of the screen.
Select
OSD
2. Select “On” using the
/
buttons.
3. Press SELECT/ENTER to confirm your selection.
The confirm menu will appear.
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the /
buttons to highlight Enter.
5. Pressing “Enter” will set the player to Progressive
scan mode.
Select a language for the Setup menu and on-screen display.
Disc Audio / Subtitle / Menu
DVD
Select the language you prefer for the audio track (disc
audio), subtitles, and the disc menu.
Original: Refers to the original language in which the
disc was recorded.
Other: To select another language, press number buttons to enter the corresponding 4-digit number according to the language code list on page 27. If you enter
the wrong language code, press CLEAR on the remote
control.
12
Caution
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan
to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that “NO DISC” is displayed on the display
window
2) Press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard setting, and a picture will once again be visible on a conventional analog TV or monitor.
Before Operation
AUDIO
5. Use
Each DVD disc has a variety of audio output options.
Set the player’s AUDIO options according to the type of
audio system you use.
6. Adjust options using
/
/ / buttons.
7. Press SELECT/ENTER to confirm your selection.
Returns to the previous menu.
Speaker selection
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48 kHz
5.1 Speaker Setup
Select
DRC
On
Vocal
On
Move
Dolby Digital / DTS / MPEG
Select a speaker that you want to adjust. [Front speaker
(Front L), Center Speaker (Center),Front speaker (Front
R), Rear speaker (Rear R), Rear speaker (Rear L) or
Subwoofer (Woofer)]
Select
DVD
Bitstream: Select “Bitstream” if you connect the DVD
Player’s DIGITAL OUT jack to an amplifier or other
equipment with a Dolby Digital, DTS or MPEG
decoder.
PCM : Select when connected to a two-channel digital stereo amplifier. DVDs encoded in Dolby Digital or
MPEG will be automatically downmixed to two-channel PCM audio.
Sample Freq. (Frequency)
DVD
If your receiver or amplifier is NOT capable of handling
96 kHz signals, select 48 kHz. When this choice is
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of signal through without any
further processing.
Check the documentation for your amplifier to verify its
capabilities.
5.1 Speaker Setup
to select the desired speaker.
DVD
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output.
Speaker Setup
Make the following settings for the built-in 5.1 channel
surround decoder.
1. Press SETUP. The setup menu appears.
2. Use
/
to select the AUDIO option then press
to move to the second level.
3. Use
/
to select the Speaker Setup option then
press to move to the third level. “Select” is highlighted.
4. Press SELECT/ENTER and 5.1 Speaker Setup
menu appears.
Size
Since the speaker settings are fixed, you cannot change
the setting.
Volume
Press / to adjust the output level of the selected
speaker. (-5dB ~ 5dB)
Distance
If you have connected speakers to your DVD Player,
setting the Distance lets the speakers know how far the
sound has to travel to reach your set listening point.
This allows the sound from each speaker to reach the
listener at the same time.
Press / to adjust the Distance of the selected
speaker.
Test
Select “All” to test the signals of each speaker.
Adjust the volume to match the volume of test signals
memorized in the system.
(When the size of the Front L/R speaker is selected to
“Large”, the subwoofer (Woofer) is not available.)
Front L → Center → Front R → Rear R →Rear L → Woofer
You can adjust the volume during operating the test
tone, first use
/
to select Volume or Speaker
option then use / buttons to select volume or
speaker, so that all speaker’s volume is same from the
listener’s position.
Dynamic Range Control (DRC)
DVD
With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation
possible, thanks to digital audio technology. However,
you may wish to compress the dynamic range of the
audio output (the difference between the loudest sounds
and the quietest ones). This allows you to listen to a
movie at a lower volume without losing clarity of sound.
Set DRC to On for this effect.
Vocal
DVD
Set Vocal to On only when a multi-channel Karaoke
DVD is playing. The karaoke channels on the disc will
mix into a normal stereo sound.
13
PREPARATION
AUDIO
/
Before Operation
Password (Security Code)
LOCK (Parental Control)
You can enter or change password.
LOCK
Rating
Unlock
Password
****
Country Code
RU
Move
1 Select Password on the LOCK menu then press .
2 Follow step 2 as shown left (Rating). “Change” or
“New” is highlighted.
3 Enter the new 4-digit code, then press
SELECT/ENTER. Input it again to verify.
4 Press SETUP to exit the menu.
Select
If you forget your Security Code
Rating
DVD
Some movies contain scenes that may not be suitable
for children to view. Many of these discs contain parental
control information that applies to the complete disc or to
certain scenes on the disc. Movies and scenes are rated
from 1 to 8, depending on the country. Some discs offer
more suitable scenes as an alternative.
The parental control feature allows you to block access
to scenes below the rating you input, thereby preventing
your children from being able to view material you
believe is unsuitable.
“Rating” on the LOCK menu then press
1 Select
.
access the Rating, Password and Country
2 ToCode
features, you must input the 4-digit
security code you created.
If you have not yet entered a security code you are
prompted to do so.
Input a 4-digit code and press SELECT/ENTER.
Enter it again and press SELECT/ENTER to verify.
If you make a mistake before pressing
SELECT/ENTER, press CLEAR.
a rating from 1 to 8 using the
/
3 Select
buttons.
Rating 1-8: Rating one (1) has the most restrictions
and rating eight (8) is the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
ote
If you set a rating for the player, all disc scenes with
the same rating or lower are played. Higher rated
scenes are not played unless an alternate scene is
available on the disc. The alternative must have the
same rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the disc.
SELECT/ENTER to confirm your rating
4 Press
selection, then press SETUP to exit the menu.
14
If you forget your security code you can clear it using
the following steps:
1 Input the 6-digit number “210499” on the setup menu
and the security code is cleared.
2 Enter a new code as described above.
ote
When “ INPUT PASSWD
” appears on the TV screen,
press STOP (x) and then press SETUP to move to the
setup menu.
Country Code
DVD
Enter the code of the country/area whose standards
were used to rate the DVD video disc, based on the list
in the reference chapter.
“Country Code” on the LOCK menu then
1 Select
press .
2 Follow step 2 as shown left (Rating).
3 Select the first character using / buttons.
the cursor using button and select the
4 Shift
second character using
/
buttons.
Press SELECT/ENTER to confirm your country
5 code selection.
Before Operation
Operation with DVD
OTHERS
Playing a DVD
OTHERS
On
DivX(R) Registration
Select
Move
Select
PBC (Playback Control)
Playback control provides special navigation features
that are available on some disc. Select [On] to use this
feature.
DivX(R) Registration
Turn on the TV and select the video input source
connected to the unit.
Audio system: Turn on the audio system and select
the input source connected to the unit.
Z OPEN/CLOSE button to open the disc
1 Press
tray.
your chosen disc in the tray, with the
2 Load
playback side facing down.
Z OPEN/CLOSE button to close the tray.
3 Press
Playback starts automatically. If playback does not
start, press PLAY.
In some cases, the disc menu might appear
instead.
DivX
You can show the DivX DRM (Digital Right
Management) Registration code for your unit only.
If a menu screen is displayed
The menu screen may be displayed first after loading a
DVD which contains a menu.
Your registration code is : XXXXXXXX
Please use this code to register this player with
the DivX(R) Video On Demand service.
This will allow you to rent and purchase videos
using the DivX(R) Video On Demand format.
To learn more go to www.divx.com/vod
The Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental an
encrypt movie file.
Notes
If you rent the DivX VOD file, it has several options of
viewing limits as show below.
• Display the number which you can watch the file.
DVD
Use the
/
/ / buttons to select the title/chapter you want to view, then press SELECT/ENTER to
start. Press TITLE or MENU to return to the menu
screen.
Notes
– If parental control is set and the disc is not within the
rating settings you must input the password.
(See “LOCK” menu on page 14.)
– DVDs may have a region code. Your player will not
play discs that have a region code different from your
player. The region code for this player is 5 (five).
? This rental video has 7 views left. A view
ends when you stop playback, play a different
video, or turn off your player.
Do you want to use one of your 7 views now
Yes
No
• The rental has been expired.
This rental is expired.
• Display the authorization error.
This video player is not authorized to
play this video.
15
OPERATION
Playback Setup
PBC
Operation with DVD
Slow Motion
General Features
ote
Unless stated otherwise, all operations described use
the remote control. Some features may also be
available on the Setup menu.
Moving to another TITLE
DVD
When a disc has more than one title, you can move to
another title. Press DISPLAY while playback is stopped
then the appropriate number (0-9) or use / to move
to another title.
You can play any title by inputting its number while playback is stopped.
Moving to another CHAPTER/TRACK
DVD
DivX
When a title on a disc has more than one chapter or a
disc has more than one track, you can move to another
chapter/track as follows:
Press . or > briefly during playback to select
the next chapter/track or to return to the beginning of
the current chapter/track.
Press . twice briefly to step back to the previous
chapter/track.
To go directly to any chapter during DVD playback,
press DISPLAY and press
/
to select the chapter/track icon. Then, input the chapter/track number or
use / .
Search
DVD
DivX
1 Press FF or GG during playback.
The player will now go into SEARCH mode.
2 Press FF or GG repeatedly to select the required
speed.
DVD; X2, X4, X8, X16, X100
DivX; X2, X4, X8, X16
3 To exit SEARCH mode, press PLAY.
Still Picture and Frame-by-frame playback
DVD
DivX
1 Press PAUSE/STEP on the remote control during
playback.
The player will now go into PAUSE mode.
2 You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control.
3 To exit still motion mode, press PLAY.
DVD
1 Press PAUSE/STEP on the remote control during
playback.
The player will enter PAUSE mode.
2 Use the FF/GG to select the required speed: t 1/2,
t 1/4, t 1/8 or t 1/16 [(backward) - DVD only] or
T 1/2, T 1/4, T 1/8 or T 1/16 (forward).
3 To return to normal PLAY, press PLAY.
Repeat
DVD
DivX
You can play a title/chapter/all/track on a disc.
Press REPEAT during playback to select a desired
repeat mode.
DVD Video Discs - Repeat Chapter/Title/Off
• Chapter: repeats the current chapter.
• Title: repeats the current title.
• Off : does not play repeatedly.
DivX - Repeat Track/All/Off
• Track : repeats the current track
• All : repeats all the tracks on a disc.
• Off : does not play repeatedly.
Repeat A-B
DVD
To repeat a sequence in a title:
1 Press A-B at your chosen starting point.
“ A - ” appears briefly on the TV screen.
2 Press A-B again at your chosen end point.
“A - B” appears briefly on the TV screen, and the
repeat sequence begins.
3 To cancel the sequence, press A-B.
Time Search
DVD
The Time Search function allows you to start playing at
any chosen time on the disc.
1 Press DISPLAY during playback. The on-screen
display appears on the screen.
The Time Search box shows the elapsed playing time of the
current disc.
2 Within 10 seconds, press
/
to select the Time
Search icon in the on-screen display.
The “-:--:--” appears in the Time Search box.
3 Within 10 seconds, use the number buttons to enter
the required start time. Enter hours, minutes, and seconds from left to right in the box.
If you enter the wrong numbers, press CLEAR to remove the
numbers you entered. Then enter the correct numbers.
4 Within 10 seconds, press SELECT/ENTER to confirm
the start time.
Playback starts from the selected time on the disc. If you enter
an invalid time, playback will continue from the current point.
16
Operation with DVD
General Features (continued)
Special DVD Features
Zoom
Checking the contents of DVD Video
discs: Menus
The Zoom function allows you to enlarge the video
image and to move through the enlarged image.
1 Press ZOOM during playback or still playback to activate the Zoom function.
If you press ZOOM repeatedly, the magnification level
increases up to four steps.
100% size (screen fit mode) → 400% size → 800%
size→ 1600% size → 100% size (screen fit mode)
2 Use the
/
/
zoomed picture.
/
buttons to move through the
Title Menu
DVD
1 Press TITLE.
ote
The zoom function may not work for some DVDs.
Marker Search
DVDs may offer menus that allow you to access special
features. To use the disc menu, press MENU. Then,
press the appropriate number button to select an option.
Or, use the
/
/ / buttons to highlight your
selection, then press SELECT/ENTER.
DVD
You can start playback from a memorized point. Up to
nine points can be memorized.
To enter a mark, follow these steps.
1 During disc playback, press MARKER when
playback reaches the spot that you want to
memorize.
The Marker icon will appear on the TV screen briefly.
2 Repeat step 1 to enter up to nine Marker points on a
disc.
To Recall a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Within 10 seconds, press / to select a Marker
number that you want to recall.
3 Press SELECT/ENTER.
If the current title has a menu, the menu will appear on the
screen. Otherwise, the disc menu may appear.
2 The menu can list camera angles, spoken language
and subtitle options, and chapters for the title.
3 To remove the title menu, press TITLE again.
Disc Menu
Press MENU.
The disc menu is displayed.
Changing the Audio Language
DVD
Press AUDIO repeatedly during playback to hear a
different audio language or audio track.
Subtitle
DVD
Press SUBTITLE repeatedly during playback to see the
different subtitle languages.
Playback will start from the Marked scene.
4 To remove the MARKER SEARCH menu, press
SEARCH.
DVD
If
ote
appears, the feature is not available on the disc.
To clear a Marked Scene
1 During disc playback, press SEARCH.
The MARKER SEARCH menu will appear on the screen.
2 Press / to select the Marker number that you
want to erase.
3 Press CLEAR.
The Marker number will be erased from the list.
4 Repeat steps 2 and 3 to erase additional Marker
numbers.
5 To remove the MARKER SEARCH menu, press
SEARCH.
17
OPERATION
DVD
DVD
Operation with Audio CD and MP3/WMA Disc
Playing an Audio CD and MP3/WMA
Repeat Track/All/Off
Disc
You can play a title/chapter/all/track on a disc.
1 Press REPEAT when playing a disc. The repeat icon
appears.
2 Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
CD
MP3
WMA
The DVD Karaoke can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press
/
to select a track then press
PLAY or SELECT/ENTER and playback starts.
0:00:00
1 / 12
Search
CD
MP3
CD
MP3
WMA
WMA
1 Press FF or GG during playback.
Audio CD
The player will now go into SEARCH mode.
Program
List
Track1
2 To exit SEARCH mode, press PLAY.
Track2
Track3
Track4
Track5
Track6
Track7
Track8
MP3 / WMA
1. Press
/
to select a folder, and press
SELECT/ENTER to see the folder contents.
2. Press
/
to select a track then press PLAY or
SELECT/ENTER. Playback starts.
0:00:00
1 / 104
MP3 / WMA
Program
List
1-Music1
2-Music2
3-Music3
4-Music4
5-Music5
6-Music6
7-Music7
otes
• If you are in a file list on the MP3/WMA menu and want
to return to the Folder list, use the
/
to highlight
and press SELECT/ENTER.
• Press MENU to go to the next page.
• On a CD with MP3/WMA file and JPEG file, you can
switch MP3/WMA and JPEG menu. Press TITLE and
MP3/WMA or JPEG word on top of the menu is highlighted. Then, use / to select MP3/WMA or JPEG
then press SELECT/ENTER.
Pause
CD
MP3
WMA
1 Press PAUSE/STEP during playback.
2 To return to playback, press PLAY or press
PAUSE/STEP again.
Moving to another Track
CD
MP3
WMA
Press . or > briefly during
playback to go to the next track or to return to the
beginning of the current track.
Press . twice briefly to step back to the previous
track.
In case of audio CD, to go directly to any track, enter
the track number using the numbered buttons (0-9)
during playback.
18
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
• The player cannot read an MP3/WMA file that has a
file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters and
must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as / ?
* : “ < > l etc.
• The total number of files on the disc should be less
than 999.
This DVD player requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including
CD-R containing MP3 or WMA files) and these require
certain pre-existing conditions (see above) to ensure
compatible playback.
Customers should note that permission is
required in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always be sought from the copyright owner.
Operation with JPEG Disc
JPEG
This unit can play discs with JPEG files. Before playing
JPEG recordings, read the notes on JPEG Recordings
on right.
1
Insert a disc and close the tray.
The JPEG menu appears on the TV screen.
Slide Show
Use
/
/ / to highlight the Slide Show then
press SELECT/ENTER.
OPERATION
Viewing a JPEG disc
Moving to another File
Press . or > once during viewing a picture to
advance to the next file or to the previous file.
JPEG
List
Preview
JPEG Folder 1
JPEG Folder 2
JPEG Folder 3
JPEG Folder 4
JPEG Folder 5
JPEG Folder 6
JPEG Folder 7
JPEG Folder 8
/
to select a folder, and press
2 Press
SELECT/ENTER. A list of files in the folder
appears.
Tip
If you are in a file list and want to return to the Folder
list, use the
/
buttons on the remote to highlight
“
and
press
SELECT/ENTER
to return to the
”
previous menu screen.
you want to view a particular file, press
3 IfSELECT/ENTER
/
to highlight a file and press
or PLAY.
Slide Show starts from the selected file if Speed
option is not Off.
While viewing a file, you can press STOP(x) to
move to the previous menu (JPEG menu).
Still Picture
1 Press PAUSE/STEP during slide show.
The player will now go into PAUSE mode.
2 To return to the slide show, press PLAY or press
PAUSE/STEP again.
JPEG disc compatibility with this player is limited
as follows:
• Depending upon the size and number of JPEG
files, it could take a long time for the DVD player to
read the disc’s contents. If you don’t see an onscreen display after several minutes, some of the
files may be too large — reduce the resolution of
the JPEG files to less than 3760 x 3840 pixels and
burn another disc.
• The total number of files and folders on the disc
should be less than 999.
• Some discs may be incompatible due to a different
recording format or the condition of disc.
• Ensure that all the selected files have the “.jpg”
extensions when copying into the CD layout.
Tip
• Press MENU to move to the next page.
• If the files have “.jpe” or “.jpeg” extensions, please
rename them as “.jpg” file.
• There are four Slide Speed options: >>> (Fast), >>
(Normal), > (Slow) and off.
Use
/
/ / to highlight the Speed. Then, use
/ to select the option you want to use then press
SELECT/ENTER.
• File names without “.jpg” extension will not be able
to be read by this DVD player. Even though the
files are shown as JPEG image files in Windows
Explorer.
• If you set Speed option to Off, Slide Show is not
active.
19
Programmed Playback
CD
MP3
WMA
The Program function enables you to store your favorite tracks from any disc in the player memory.
A program can contain 99 tracks (Audio CD) or 300 tracks (MP3/WMA).
1
Insert a disc.
Repeat Programmed Tracks
Audio CD and MP3/WMA Discs:
Audio CD or MP3/WMA menu appears as below.
0:00:00
1 / 12
0:00:00
Audio CD
List
1 / 104
MP3 / WMA
Program
List
Program
Music8
Track1
Track8
Track2
Track3
Music1
Music16
Track3
Track12
Music2
Music5
Track4
Track7
Music3
Music9
Track5
Track6
Music4
Music1
Track6
Track9
Music5
Track7
Track1
Music6
Music6
Track8
Track10
Music7
Music3
Audio CD Menu
Music7
MP3/WMA Menu
2 Select a track on the List.
PROGRAM. Or, select “
(Add)” icon
3 Press
then SELECT/ENTER to place the selected track
on the Program list. Repeat to place additional
tracks on the list.
ote
You can add all tracks in the disc. Select “
icon then press SELECT/ENTER.
(Add All)”
the track you want to start playing on the
4 Select
Program list. Press and hold
/
to move to
the next / previous page.
PLAY or SELECT/ENTER to start.
5 Press
Playback begins in the order in which you programmed the tracks and “PROG.” appears on the
display window. Playback stops after all of the
tracks on the Program list have played once.
20
You can play a title/chapter/all/track on a disc.
1 Press REPEAT when playing a disc. The repeat icon
appears.
2 Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on a disc.
• Off(No display): does not play repeatedly.
Erasing a Track from Program List
1 Use
/
/ / to select the track that you wish
to erase from the Program list.
2 Press CLEAR. Or, select “
(Delete)” icon then
Press SELECT/ENTER to place the selected track on
the Program list. Repeat to erase additional tracks on
the list.
Erasing the Complete Program List
Select “
(Del all)”, then press SELECT/ENTER. The
complete Program for the disc is erased.
ote
The programs are also cleared when the disc is removed.
To resume normal playback from programmed playback
Select a track on the List then press SELECT/ENTER.
“PROG.” disappears from the display window.
Operation with DivX Disc
1
Insert a disc and close the tray.
The DivX menu appears on the TV screen.
0:00:00
DivX disc compatibility with this player is limited
as follows:
• Available resolution size of the DivX file is under
720x576 (W x H) pixel.
1 / 12
DIVX
List
Movie Folder 1
• The file name of the DivX subtitle is available by
20-40 characters (differs from language).
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
• If there is impossible code to express in the DivX
file, it may be displayed as " _ " mark on the display.
Movie Folder 8
• If the number of the screen frame is over 30 per
1 second, this unit may not operate normally.
/
to select a folder, and press
2 Press
SELECT/ENTER to see the folder contents.
Tip
If you are in a file list and want to return to the Folder
list, use the
/
buttons on the remote control to
highlight “
” and press SELECT/ENTER to return to
the previous menu screen.
to view a particular file, press
3 If you/ want
to highlight a file and press
SELECT/ENTER or PLAY.
Playback starts.
• If the video and audio structure of recorded file
is not interleaved, either video or audio is outputted.
• If the file is recorded with GMC, the unit supports some of 1-point of the record level.
* GMC?
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4 encoder, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually called
1-point, 2-point, or 3-point GMC.
Playable DivX subtitle file
z ".srt ", ".smi ", ".sub ".
otes
Be sure to select “SUBTITLE ON” mode by pressing the
subtitle file every time before playing a DivX file .
When the subtile has more than two languages in the file,
original subtile is only available.
The DivX files in your memory card will not be able to be
play.
Display
DivX
Press DISPLAY during playback.
General playback status can be displayed on the TV
screen.
Playable DivX file
z ".avi ", ".mpg ", ".mpeg "
Playable Codec format
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ", "MP42 ".
Playable Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
• Sampling frequency: within 32 - 48 kHz (MP3),
within 24 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
40 - 192kbps (WMA)
21
OPERATION
The unit can play the DivX files.
Operation with KARAOKE
You can play KARAOKE(singing along) with CD by connecting a microphone to the unit.
You can enjoy KARAOKE with a stereo-recorded disc, even if it is a non-karaoke disc, by reducing the singer’s voice.
Karaoke Basic Playback
Karaoke Advanced Playback
if the system is connected.
1 Check
(Refer to the page 8-9.)
on the powers of TV (or Amplifier) and DVD
2 Turn
Karaoke and enter to the video mode on TV.
Z OPEN/CLOSE to open the disc tray and
3 Press
load supplied karaoke disc in the tray with the
label facing up.
Return Function
to close the tray.
4 Press Z OPEN/CLOSE
[
TV Screen]
This is a function that returns to the preceding MENU.
Press the RETURN .
ote
If there is no preceding menu (in case of the first
menu), this function may not be executed.
To Adjust MIC Volume
Press the Microphone volume control (MIC VOL.
) button on the remote control clockwise to
increase the volume, or counterclockwise to
decrease it. (0~15 steps)
/
To Adjust ECHO Volume
You can give an echo effect to the sound from the
microphones.
Connect the microphone to the MIC 1 or MIC 2
jack.
5
the melody number you want by pressing
6 Select
NUMERIC buttons.
If you cancel the selected melody number, press
the CLEAR.
7
Press PLAY.
The selected melody number is played.
Sing in tone with microphone.
After melody ends, it is stopped automatically and
score appears.
ote
Don’t connect the microphone during playing DivX disc.
22
Press the ECHO volume control (ECHO VOL.
/
) button on the remote control clockwise to
increase the echo, or counterclockwise to decrease
it. (0~15 steps)
Key Control
You can change the key to suit your vocal range.
You can adjust the key to 13 steps (6steps higher,
6steps lower and the original key).
- The setting appears on the screen.
Press KEY CONTROL (b/#) repeatedly on the remote
control or turn KEY CONTROL (b/#) on the front
panel to find the key that suits your vocal range.
To flatten the key one by one, press the KEY
CONTROL (b) repeatedly during playback.
To sharp the key one by one, press the KEY
CONTROL (#) repeatedly during playback.
To return to the original key, press the KEY
CONTROL (b/#) repeatedly to appear the original
key.
Operation with KARAOKE
Reserving the Songs
Karaoke MENU Playback
When you want to make a reservation of next melody,
you can enjoy the most 8 melodies reservation
Without waiting.
Preparation
Press the NUMERIC buttons to reserve
melody number you want in the karaoke disc
play mode.
Melody number appears on the TV screen.
OPERATION
1
Press MENU on the karaoke mode.
The main MENU appears on the screen.
Main MENU (On the TV screen)
PROGRAM.
2 Press
The melody number is made a reservation.
steps 1-2.
3 Repeat
You can reserve 8 songs.
ip
After the one song finishes its playback, the next song
will be playback automatically.
To cancel the reserved song
Each time you press CLEAR, the reserved song will be
cancelled one by one.
To cancel or change the wrong reserved song
SETUP (
)
by pressing
/
on the
1 Select
main menu.
/ to select the desired option, and
2 Use
press SELECT/ENTER.
Press the PROGRAM to move to the desired position,
then press the CLEAR to cancel the reserved song.
ÇÍÎ Ç˚ÍÎ
Male/Female Function
ÇÍÎ Ç˚ÍÎ
ÇÍÎ Ç˚ÍÎ
If you want to sing a song of MAN’s or WOMEN’s key,
press MALE( )/FEMALE( ) button repeatedly to
change MAN’s or WOMEN’s key.
ÇÍÎ Ç˚ÍÎ
Tempo Change
You can use this function when you want to play fast or
slow.
• Press TEMPO + repeatedly during singing to play
faster.
• Press TEMPO - repeatedly during singing slower.
Shadow Function
If some CD caption and the song’s subtitle are mixed
up, the song’s subtitle may be invisible. In this case, to
highlight the song’s subtitle, press SHADOW.
- It will be highlighted by background shadow image.
SCORE ON/OFF (
ÇÍÎ Ç˚ÍÎ )
ÇÍÎ : When singing by selection of melody, song score
comes out after one piece of song is ended.
To cancel it, select the Ç˚ÍÎ .
FANFARE ON/OFF (
ÇÍÎ Ç˚ÍÎ )
ÇÍÎ : In condition of POWER ON, scoring fanfare
operates. The fanfare sound comes out after
singing finished.
To cancel it, select the Ç˚ÍÎ .
LYRIC ON/OFF (
ÇÍÎ Ç˚ÍÎ )
ÇÍÎ : When singing by selection of melody, song lyric
appears on the TV screen.
To cancel it, select the Ç˚ÍÎ .
CHORUS ON/OFF (
ÇÍÎ Ç˚ÍÎ )
ÇÍÎ : When singing by selection of melody, song
chorus is heard a sound.
To cancel it, select the Ç˚ÍÎ .
ote
To move to the main menu, press MENU or RETURN.
23
Operation with KARAOKE
MUSIC LIST (
)
LOCAL SONG (
SONG (
1
SINGER LIST (
)
1 Select
and select the initial
of the singer you want by pressing the
/
in
the SONG LIST and SINGER LIST menu, and
press SELECT/ ENTER.
) and POP
)
Select
by pressing the
/
on the main menu.
The LOCAL SONG, POP SONG and CLASSIC
menu will be shown on the TV screen.
1
1
2
5
A
7
B
A
C
F
D
H
E
M
F
R
2 Select the singer you want by pressing the
, and press SELECT/ ENTER.
2 Select
by pressing the
/
or
, and press SELECT/
/
iSYNC
140 ìÑA . . .
2 UNLIMITED
A-HA
A.BRYSON
ADRIANO
AEROSMITH
AIR SUPPLY
AL BANO ...
ENTER.
SONG LIST and SINGER LIST menu will be shown
on the TV screen.
3 Select the song title of the singer you want by
pressing the
/ , and press SELECT/ ENTER.
0871 ÅEá TEÅü
2431 BAì BA
1078 áA ÑàCTOèAÑOM
1816 Oâ, Oâ
2714 ü ÅìÑì ÅEÜAT . . .
2717 ü CKìóA˛ èO T . . .
SONG LIST (
)
1 Select
and select the initial of the
song title you want by pressing the
/ , then
press SELECT/ ENTER.
140 ìÑA . . .
140 ìÑA . .
140 ìÑA . .
140 ìÑA . .
140 ìÑA . .
140 ìÑA . .
ote
To move the previous mode, select the
by pressing
the
/ , then press SELECT/ ENTER.
1
2
3
4
5
7
B
E
2 Select the song title you want by pressing the
, and press SELECT/ ENTER.
0165
1368
1369
0001
1370
24
10 000 KM
10 KAèEãú
1100
12-85-00
17 ãEí
CìKAó ...
íÄçñõ...
Äêàü
XAMEã...
óAâî
/
CLASSIC (
1
)
Select
by pressing the
/ , and press SELECT/ ENTER in the LOCAL
SONG, POP SONG and CLASSIC menu.
The CLASSIC LIST and COMPOSER LIST menu
will be shown on the TV screen.
COMPOSER LIST (
)
1 Select
and select the initial
of the composer you want by pressing the
/
in the CLASSIC LIST and COMPOSER LIST menu,
and press SELECT/ ENTER.
A
B
C
D
E
F
G
H
2 Select the composer you want by pressing the
/ , and press SELECT/ ENTER.
CLASSIC LIST (
)
1 Select
and select the initial of
the song title you want by pressing the
/ ,
then press SELECT/ ENTER.
BALAKIREV
BEETHOVEN
BOCCHERINI
BRAHMS
A
B
C
D
E
F
G
H
3 Select the song title of the composer you want by
pressing the
/ , and press SELECT/ ENTER.
2 Select the song title you want by pressing the
, and press SELECT/ ENTER.
3802
3803
3804
3805
3806
3807
3808
3809
ABOUT FOREIGN LAN...
AIR (HOLBERG)
ALMOST TOO SERIOU...
ANDANTE & RONDO C...
ANITRA’S DANCE (P...
ARABESKE OP.18
ARABESQUE NO.1 IN E
ARABESQUE NO.2 IN E
SCHUMANN
GRIEG
SCHUMANN
MENDELSSOH
GRIEG
SCHUMANN
DEBUSSY
DEBUSSY
/
3816
3817
3852
3904
3905
3906
3923
3924
BAGATEL OP.33 NO.1
BAGATEL OP.33 NO.4
FUER ELISE
MOONLIGHT SONATA...
MOONLIGHT SONATA...
MOONLIGHT SONATA...
PATHETIQUE SONAT...
PATHETIQUE SONAT...
BEETHOVEN
BEETHOVEN
BEETHOVEN
BEETHOVEN
BEETHOVEN
BEETHOVEN
BEETHOVEN
BEETHOVEN
ote
To move the previous mode, select the
by pressing
the
/ , then press SELECT/ ENTER.
25
OPERATION
Operation with KARAOKE
Operation with KARAOKE
RANDOM (
1
)
Select
the main menu.
by pressing
/
on
number you want by pressing
5 Select
press SELECT/ ENTER.
Sing along with the accompaniment.
/
and
6
7
Repeat step 4~5.
Change the team of red team or blue team
alternately.
When reaching the targeted winning number, the
8
Whether you keep going the song game or not,
will be shown on the TV screen.
It appears as below.
2 Press SELECT/ENTER to begin randomly.
CHALLENGE (
)
It has a function which enjoy a song game dividing by
two teams of red team & blue team.
1
Select
the main menu.
It appears as below.
by pressing
/
on
1 2 3 4 5 6 7 8 9
60
70
80 90
by pressing
2 Select
/ , and select one of NUMERIC buttons 1~9
by pressing / to select winner’s number,
then press SELECT/ ENTER.
by pressing
3 Select
/ , and select one of 60,70,80 or 90 by
pressing / to select success score, then
press SELECT/ ENTER.
by pressing
4 Select
SELECT/ ENTER.
It appears as below.
0
26
/
0
, then press
select
below.
or
by pressing
/
as
Language Code List
Language
Abkhazian
Afar
Afrikaans
Albanian
Ameharic
Arabic
Armenian
Assamese
Azerbaijani
Bashkir
Basque
Bengali; Bangla
Bhutani
Bihari
Breton
Bulgarian
Burmese
Byelorussian
Cambodian
Catalan
Chinese
Corsican
Croatian
Czech
Danish
Dutch
English
Esperanto
Estonian
Faroese
Fiji
Code
6566
6565
6570
8381
6577
6582
7289
6583
6590
6665
6985
6678
6890
6672
6682
6671
7789
6669
7577
6765
9072
6779
7282
6783
6865
7876
6978
6979
6984
7079
7074
Language
Finnish
French
Galician
Georgian
German
Greek
Greenlandic
Guarani
Gujarati
Hausa
Hebrew
Hindi
Hungarian
Icelandic
Indonesian
Interlingua
Irish
Italian
Japanese
Javanese
Kannada
Kashmiri
Kazakh
Kirghiz
Korean
Kurdish
Laothian
Latin
Latvian, Lettish
Lingala
Lithuanian
Code
7073
7082
7176
7565
6869
6976
7576
7178
7185
7265
7387
7273
7285
7383
7378
7365
7165
7384
7465
7487
7578
7583
7575
7589
7579
7585
7679
7665
7686
7678
7684
Language
Macedonian
Malagasy
Malay
Malayalam
Maltese
Maori
Marathi
Moldavian
Mongolian
Nauru
Nepali
Norwegian
Oriya
Panjabi
Pashto, Pushto
Persian
Polish
Portuguese
Quechua
Rhaeto-Romance
Rumanian
Russian
Samoan
Sanskrit
Scots Gaelic
Serbian
Serbo-Croatian
Shona
Sindhi
Singhalese
Slovak
Code
7775
7771
7783
7776
7784
7773
7782
7779
7778
7865
7869
7879
7982
8065
8083
7065
8076
8084
8185
8277
8279
8285
8377
8365
7168
8382
8372
8378
8368
8373
8375
Language
Slovenian
Somali
Spanish
Sudanese
Swahili
Swedish
Tagalog
Tajik
Tamil
Tatar
Telugu
Thai
Tibetan
Tigrinya
Tonga
Turkish
Turkmen
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Welsh
Wolof
Xhosa
Yiddish
Yoruba
Zulu
Code
8376
8379
6983
8385
8387
8386
8476
8471
8465
8484
8469
8472
6679
8473
8479
8482
8475
8487
8575
8582
8590
8673
8679
6789
8779
8872
7473
8979
9085
Country Code List
Choose a country code from this list.
Country
Afghanistan
Argentina
Australia
Austria
Belgium
Bhutan
Bolivia
Brazil
Cambodia
Canada
Chile
China
Colombia
Congo
Costa Rica
Croatia
Czech Republic
Denmark
Ecuador
Egypt
El Salvador
Code
AF
AR
AU
AT
BE
BT
BO
BR
KH
CA
CL
CN
CO
CG
CR
HR
CZ
DK
EC
EG
SV
Country
Ethiopia
Fiji
Finland
France
Germany
Great Britain
Greece
Greenland
Islands
Hong Kong
Hungary
India
Indonesia
Israel
Italy
Jamaica
Japan
Kenya
Kuwait
Libya
Luxembourg
Code
ET
FJ
FI
FR
DE
GB
GR
GL
HM
HK
HU
IN
ID
IL
IT
JM
JP
KE
KW
LY
LU
Country
Code
Malaysia
MY
Maldives
MV
Mexico
MX
Monaco
MC
Mongolia
MN
Morocco
MA
Nepal
NP
Netherlands
NL
Dutch Antilles
AN
New Zealand
NZ
Nigeria
NG
Norway
NO
Oman
OM
Pakistan
PK
Panama
PA
Paraguay
PY
Philippines
PH
Poland
PL
Portugal
PT
Romania
RO
Russian Federation RU
Country
Saudi Arabia
Senegal
Singapore
Slovak Republic
Slovenia
South Africa
South Korea
Spain
Sri Lanka
Sweden
Switzerland
Taiwan
Thailand
Turkey
Uganda
Ukraine
United States
Uruguay
Uzbekistan
Vietnam
Zimbabwe
Code
SA
SN
SG
SK
SI
ZA
KR
ES
LK
SE
CH
TW
TH
TR
UG
UA
US
UY
UZ
VN
ZW
27
REFERENCE
Use this list to input your desired language for the following initial settings:
Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting / Specifications
Check the following guide for the possible cause of a problem before contacting service.
Symptom
Possible Cause
Correction
No power.
• The power cord is disconnected.
• Plug the power cord into the wall outlet
securely.
The power is on, but
the DVD player does
not work.
• No disc is inserted.
• Insert a disc. (Check that the DVD or audio
CD indicator in the display
window is lit.)
No picture.
• The TV is not set to receive DVD signal output.
• Select the appropriate video input mode on
the TV.
• The video cable is not connected
securely.
• Connect the video cable securely.
• The equipment connected with the
audio cable is not set to receive DVD
signal output.
• Select the correct input mode of the audio
receiver so you can listen to the sound from
the DVD player.
• The power of the equipment connected
with the audio cable is turned off.
• Turn on the equipment connected with the
audio cable.
• The AUDIO options are set to the
wrong position.
• Set the Digital Audio Output to the
correct position, then turn on the DVD player again by pressing POWER.
• An unplayable disc is inserted.
• Insert a playable disc. (Check the disc type,
color system, and regional code.)
• The rating level is set.
• Cancel the rating function or change the
rating level.
• The remote control is not pointed at
the remote sensor on the DVD player.
• Point the remote control at the remote sensor of the DVD player.
• The remote control is too far from the
DVD player.
• Operate the remote control closer to the
DVD player.
No sound.
The DVD player does
not start playback.
The remote control
does not work properly.
General
Power requirements . . . . . . AC 220-240 V , 50/60 Hz
Power consumption . . . . . . . . . . . . . . . . . . . . . 14 W
Dimensions (approx.) .430 X 43 X 260 mm (w x h x d)
Mass (approx.) . . . . . . . . . . . . . . . . . . . . . . . . 2.3 kg
Operating temperature . . . 5˚C to 35˚C (41˚F to 95˚F)
Operating humidity . . . . . . . . . . . . . . . . . 5 % to 90 %
System
Laser . . . . .Semiconductor laser, wavelength 650 nm
Signal system . . . . . . . . . . . . . . . . PAL/NTSC/AUTO
Frequency
response . . . . . . DVD (PCM 96 kHz): 8 Hz to 44 kHz
DVD (PCM 48 kHz): 8 Hz to 22 kHz
CD: 8 Hz to 20 kHz
Signal-to-noise ratio . . . . . . . . . . . More than 100 dB
(ANALOG OUT connector only)
Harmonic distortion . . . . . . . . . . . Less than 0.008 %
Dynamic range . . . . . . . . . . More than 100 dB (DVD)
More than 95 dB (CD)
Outputs
VIDEO OUT . . . . . . . . . . . . . . . . . . . . . . .1 Vp-p 75 Ω,
sync negative, RCA jack x 1
S-VIDEO OUT . . . . . . . . . . . . . . .(Y) 1.0 V (p-p), 75 Ω,
negative sync, Mini DIN 4-pin x 1
(C) 0.3 V (p-p) 75 Ω
COMPONENT
VIDEO OUT . . . . . . . . . . . . . . . .(Y) 1.0 V (p-p), 75 Ω,
negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p),
75 Ω, RCA jack x 2
Audio output (digital audio) . . . . . . . .0.5 V (p-p), 75 Ω,
RCA jack x 1
Audio output (optical audio) . . . . . . . . .3 V (p-p), 75 Ω,
Optical connector x 1
Audio output (analog audio) . . .2.0 Vrms (1 KHz, 0 dB),
600 Ω, RCA jack (L, R) x 1
Design and specifications are subject to change without notice.
Manufactured under license from Dolby Laboratories. Dolby, MLP Lossless and the double-D symbol are trademarks of Dolby
Laboratories. Confidential unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved.
DTS and DTS Digital Surround are registered trademarks of Digital Theater Systems, Inc.
P/NO : MFL39518823
">