LG | LAC-M3611 | Owner's Manual | LG LAC-M3611 Owner's manual

LG LAC-M3611 Owner's manual
LAC-M1600/3600_50L_ENG_MOSCOW
ENGLISH
CAR CD/MP3/WMA Receiver
OWNER'S MANUAL
MODEL
:
LAC-M1600/1601/1610/1611
LAC-M3600/3601/3610/3611
Please read this instruction booklet
before
The
connecting, operating
working
life of this
product
or
carefully and completely
adjusting this product.
is 7 years since the date of
purchase.
Safety
note
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT SPLIT
NO USER SERVICEABLE PARTS INSIDE.
COVER(OR BACK)
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The
flash with arrowhead
lightning
intended to alert the
voltage
to constitute
a
an
equilateral triangle
Always operate
an equilateral triangle is intended to alert the
important operating and maintenance (servicing)
literature accompanying the appliance.
point
within
the vehicle in
Do not become distracted
aware
of all
driving
in
over
Do not
use
a
a
safe
manner.
the vehicle while
by
condition. Do not
safe and
legal
manner
for many hours at
driving, and always be fully
change settings, or any functions.
before attempting such operations.
extremely
low
or
high temperature.
(-10~60°C)
To reduce the risk of electric
shock, do
not
remove
this
product. There are no user-serviceable parts
Refer servicing to qualified service personnel.
To reduce the risk of fire
dripping
Due to
or
CAUTION
:
or
electric
splashing water, rain,
high temperature
installed in
shock, do
or
the
cover or
back of
inside.
not expose this
product
to
moisture.
outside of the
unit, please
use
the unit
only
a car.
VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED.
CAUTION
To
is
to the presence of
instructions in the
Pull
within
risk of electric shock to persons.
The exclamation
user
symbol,
about the presence of uninsulated dangerous
within the product's enclosure that may be of sufficient magnitude
user
:
This
product
uses a
Laser
System.
proper use of this product, please read this owner's manual carefully
and retain it for future reference. Should the unit require maintenance, contact an
ensure
authorized service center.
Performing controls, adjustments, or carrying out procedures
specified herein may result in hazardous radiation exposure.
To
other than those
prevent direct exposure to laser beam, do not try to open the enclosure.
Visible laser radiation when open. DO NOT STARE INTO BEAM.
2
Safety
?
A defective
note / Table of contents
or
soiled disc inserted into unit
can cause
sound to
drop
out
during playback.
?
Handle the disc
?
Do not touch the surface of the unlabeled side of the disc.
by holding
Do not stick paper
8cm
or
tape
its inner and outer
etc.
on
the surface.
Do not expose the disc to direct
sunlight
This unit cannot be
8cm disc
?
Clean the disc before
with
?
operated by
a
Never
cleaning
use
playback. Wipe
or
excessive heat.
(using
12cm disc
only).
the disc from the center outward
cloth.
solvents such
Periodically wipe
edges.
as
the contacts
benzine
on
or
alcohol to clean the disc.
the back of the front
panel
with
a
cotton
swap moistened with alcohol.
Safetynote............................................2-3
Tableofcontents.........................................3
Beforeuse.............................................4
Frontpanel............................................5-6
Remotecontrol..........................................7
Installation..............................................8
Connectiondiagram.......................................9
Connection.............................................10
Basicoperation.......................................11-13
Radiooperation.........................................14
CD/MP3/WMAoperation................................15-16
Troubleshooting........................................17
Specifications..........................................18
3
Before
use
Detachable front
The front
Press the
2
Hold the
3
2
4
of this unit
panel
1
panel
can
(RELEASE)
right part the
Pull the front panel.
Place the front panel
be detached to
to open the front
front
prevent theft.
panel.
panel.
in the
supplied protective
case.
3
4
Front
panel
Protective Case
Attachable front
The front
panel
of this unit
panel
can
be detached to
prevent theft.
the left side of the
1
Align
2
Push the
right
side
or
panel with stopper.
panel into the unit until
clicks.
Notes
?
?
When
detaching or attaching
display or control buttons.
the front
panel,
do not press the
The control buttons may not work properly if the front panel is
not attached properly. If this occurs, gently press the front
panel.
2
?
Do not leave the front
temperatures
?
1
Do not
drop
or
direct
the front
panel in any
sunlight.
panel
or
area
otherwise
exposed
subject
to
it to
high
strong
impact.
?
Do not allow such volatile
insecticides to
come
agents
as
benzine, thinner,
panel.
?
Do not
try
to disassemble the front
4
or
into contact with the surface of the front
panel.
Front Panel
LAC-M1600/1601/1610/1611
12
3
4
5
6
7
VOL
8
TUNE
SRC
MUTE
DISP
BAND
VOL
TUNE
PWR
AS/PS
SEL.
21
1
2
20
19
18
1
2 SCAN
3
RPT
4
SHF
11
SOURCE
?
[BAND]
F-
1716151413
EJECT Z
?
5
F+
6
EQ
12
XDSS
11
EQUALIZER/XDSS
10
9
[EQ/XDSS]
12 PRESET STATION [1-6]
[SRC]
13
?
MP3 TRACK +10/-10
MP3
?
FOLDER UP/DOWN
[F+/F-]
3
DISPLAY WINDOW
4
DISC SLOT
14 SHUFFLE [SHF]
5
REMOTE SENSOR
15 REPEAT [RPT]
6
SKIP ?m/M? / SEEK
16 INTRO SCAN [SCAN]
7
RELEASE
17 PLAY/PAUSE B/X
8
SEARCH m/M / TUNE +/-
18 SELECT [SEL]
9
DISPLAY
10
?
AUTO STORE
?
PRESET SCAN
19 POWER [PWR]
[DISP]
20 [MUTE]
[AS]
21
[PS]
5
?
VOLUME
?
CONTROL UP/DOWN
[VOL+/-]
WMA
MP3
WMA
Front Panel
LAC-M3600/3601/3610/3611
12
3
4
567
8
SRC
DISP
BAND
XDSS
MUTE
21
20
19
PWR
1
18
2 SCAN
3
RPT
4
5
SHF
13
17161514
11
6
F-
EQ
AS/PS
F+
12
11
10
1
EJECT Z
2
?
VOLUME
?
CONTROL UP/DOWN
12 PRESET STATION [1-6]
?
SELECT
13
[VOL/SEL]
?
?
AUTO STORE
[AS]
PRESET SCAN
[PS]
?
MP3 TRACK +10/-10
MP3
?
FOLDER UP/DOWN
[F+/F-]
3
DISPLAY WINDOW
4
DISC SLOT
14 SHUFFLE [SHF]
5
REMOTE SENSOR
15 REPEAT [RPT]
6
?
SKIP ?m/M? / SEEK
16 INTRO SCAN [SCAN]
?
SEARCH m/M / TUNE +/-
17 PLAY/PAUSE B/X
7
RELEASE
8
DISPLAY
9
[XDSS]
18 POWER [PWR]
19 [MUTE]
[DISP]
20 [BAND]
10 EQUALIZER [EQ]
21
6
SOURCE
[SRC]
9
WMA
MP3
WMA
Remote control
1
POWER
2
SELECTION
3
SOURCE
4
PLAY / PAUSE B/X
[PWR]
/ MUTE
1
[SEL]
[SRC]
2
5
INTRO SCAN
6
SHUFFLE
7
?
MP3 TRACK +10
MP3
WMA
5
?
FOLDER UP
MP3
WMA
6
8
9
[SCAN]
11
4
[SHF]
[F+]
12
13
?CDSKIP/SEARCH?mm
7
?SEEK/TUNE?mm
8
14
9
15
[BAND]
10 VOLUME UP
11
10
3
NUMBER
U
/ DOWN
u
16
[#]
12 REPEAT [RPT]
13 NUMBER [0 -9]
(Optional)
14?CDSKIP/SEARCHMM?
?SEEK/TUNEMM?
15 DISPLAY [DISP.]
16
?
MP3 TRACK -10
?
FOLDER DOWN
Battery
MP3
[F-]
WMA
MP3
WMA
installation
1
Remove the
2
Install the
battery holder with a pencil or ball point pen.
battery on the battery holder.
battery holder back into its original position.
3
Install the
Notes
?
Use
?
Remove the
only
period
one
CR2025
battery
(3V)
lithium
battery.
if the remote control is not used for
of time.
?
Do not leave the
?
Do not handle the
?
Do not store the
?
In the event of
product
battery
battery
in
a
hot
or
humid
place.
with metallic tools.
with metallic materials.
battery leakage, wipe the remote
completely clean and install a new battery.
7
control
a
long
Installation
Basic Installation
Before
Bend the claws
according
make
installing,
OFF and
to
remove
sure
that the
the terminal of the
ignition-switch is set
battery to avoid
the thickness
short-circuiting.
of the
dashboard
Front
to
car
1
Remove the
2
3
Make the necessary connections.
Install the installation sleeve.
4
Install the unit into the installation sleeve.
existing
receiver unit.
panel
Removing the existing receiver unit.
If there is already an installation sleeve
A
A
the
dashboard,
1
Remove the
2
Remove the front
3
Insert the lever
for the receiver unit in
it must be removed.
Perform the
support from the unit.
rear
A
panel
and trim
into the hole
ring
operation on the
mounting sleeve.
same
unit out from the
from the unit.
on one
side of the unit.
other side and
pull
the
ISO-DIN Installation
1
Install
3
Slide the unit and frame into dash
4
Install the dash
5
6
Front
Slide the unit into the ISO-DIN frame.
2
screws
removed from the old unit.
opening.
panel or adapter plate.
Install the trim ring to unit.
Install the faceplate by fitting right edge into position
pushing left edge closed.
panel
8
then
Connection
Before
connecting,
make
sure
that the
ignition
switch is set to
diagram
OFF, and
remove
the
battery
terminal to avoid short circuits.
A
B
PHONE MUTE
(ORANGE)
GROUND(-) (BLACK)
DIMMER
(PINK)
TO IGNITION
DIMMER SWITCH
(RED)
IGNITION SWITCH
TO
BATTERY(+) (YELLOW)
POWER ANTENNA
(BLUE)
AMPLLIFIER
BATTERY
(Optional)
REMOTE ON
(BLUE/WHITE)
POWER
ANT
CONTROL RELAY
C
1. WHITE FL+
2. WHITE/BLACK STRIPE FL3. GRAY FR+
4. GRAY/ BLACK STRIPE FR5. GREEN RL+
6. GREEN/ BLACK STRIPE RL7. VIOLET RR+
8. VIOLET/ BLACK STRIPE RR-
9
Connection
C
Connections
Speaker
8
7
6
5
4
3
2
A
B
From antenna
To the
wiring
of the vehicle colors of leads.
1
?
BLACK
:
This lead is for the
ground
?
connection.
ORANGE
:
This lead is for the
phone
?
PINK
:
This lead is for the dimmer line
?
RED
:
YELLOW
:
line connection.
connection.
L
This lead is for connection to the power
supply terminal when the ignition switch is
set to ACC.
FRONT
?
This lead is for connection to the
(back-up) terminal
always supplied.
R
?
BLUE
:
battery
from which power is
This lead is for the power antenna
connection.
?
L
BLUE/WHITE
:
This lead is for the remote
amplifier
on
connection.
REAR
R
Connecting
to
Auxiliary Equipment (Optional)
Connect the AUDIO OUTPUT connector of this unit to the
AUDIO INPUT connector of the
FL
(Front Left)
FR
(Front Right)
RL
(Rear Left)
RR
(Rear Right)
To AUDIO OUT
To AUDIO IN
To AUDIO IN
10
Auxiliary Equipment.
Basic
Turning
the unit
Press the PWR
operation
on
(POWER/MUTE
on
the remote
control)
or
any other button.
Note
When you insert the CD in the CD
Turning
slot, the unit
turns
on.
the unit off
Press the PWR
Selecting
(POWER/MUTE
on
the remote control for
more
than 1.2
seconds.)
a source
Press the SRC
repeatedly to select a source.
lights up in the following order. Tuner
The indicator
Adjusting
→
CD
→
Tuner...
the volume
Press the VOL+/-
(Press
the VOLUME
U
u on
the remote
control)
to
adjust
sound level.
:
LAC-M1600/1601/1610/1611
Rotate the VOL/SEL.:LAC-M3600/3601/3610/3611
Note
When you turn the unit off, the current volume level is automatically memorized. Whenever
you turn the unit back on, it will operate at the memorized volume level.
Setting
the clock
1
Press the DISP and
2
Press the M? to
3
Press the ?m to
Checking
You
can see
by press and hold
adjust the hour.
adjust the minute.
for
more
than 1 second.
the clock
the clock
pressing
the DISP
(DISP.
on
the remote
control).
Mute
1
Press the MUTE
2
To cancel
(POWER/MUTE
on
the remote
it, press again.
11
control)
to cut the sound.
Basic
Adjusting
operation
the
sound
beep
Press the SEL for
1
Press the VOL/SEL for
"BEEP ALL"
2
than 2 seconds.
more
LAC-M1600/1601/1610/1611
:
than 2 seconds.
more
"BEEP 2ND" appear.
Press the VOL+/- (Press the VOLUME
:
LAC-M3600/3601/3610/3611
or
U
u on
the remote
control)
to select
beep
sound.
LAC-M1600/1601/1610/1611
Rotate the VOL/SEL.:LAC-M3600/3601/3610/3611
BEEP ALL
:
BEEP 2ND
Using
The
:
When any button is pressed,
When a key is long pressed
the EQ
Press the EQ/XDSS
Pop
t
Press the EQ
Pop
t
EQ off
lights
Classic
t
repeatedly.
t
:
Rock
:
to match the acoustic characteristics of
equalization
LAC-M1600/1601/1610/1611
up in the following order.
Rock t User1 t User2
repeatedly.
Classic
sound.
(Equalizer)
lets you adjust the
the car's interior design.
equalizer
The indicator
beep sound.
(1sec), beep
t
EQ off
(No display)
LAC-M3600/3601/3610/3611
t
Jazz
t
Vocal
t
Salsa
t
Samba
t
User1
t
(No display)
Optimized
Optimized
Optimized
for
R&B, Soul and Country music.
?
Pop
:
?
Classic
:
?
Rock
:
?
Jazz
:
Sweet sound with soft
?
Vocal
:
Powerful realism with
?
Salsa
:
?
Samba
:
?
User1
:
Use the
menu
?
User2
:
Use the
menu
for orchestral music.
for Hard Rock and
Reproduces
Reproduces
XDSS (Extreme
Heavy
strong sound quality.
salsa music acoustics.
samba music acoustics.
to set the sound level you want.
to set the sound level you want.
Dynamic Sound System)
Press and hold the EQ/XDSS to reinforce
treble, bass and surround effect.
LAC-M1600/1601/1610/1611
Press the XDSS.
XDSS off
:
Metal music.
feeling.
LAC-M3600/3601/3610/3611
(No display)
t
XDSS
12
:
User2
t
:
Basic
Using
1
the User1/User2
Press the SEL
operation
(Sound level)
to select the mode you want to
repeatedly
adjust from volume, bass,
middle, treble, balance and fader. : LAC-M1600/1601/1610/1611
Press and hold the VOL/SEL, and then press it repeatedly. : LAC-M3600/3601/3610/3611
The indicator
lights up in the following order.
VOLtBAStMIDtTRBtBALtFAD
2
Press the VOL+/-
quality.
:
(Press
the VOLUME
U
u on
the remote
control)
to
adjust
Rotate the VOL/SEL.
Turn
:
LAC-M3600/3601/3610/3611
Turn left
right
Increase the volume level.
Decrease the volume level.
BAS
Increase the bass level.
Decrease the bass level.
MID
Increase the middle level.
Decrease the middle level.
TRB
Increase the treble level.
Decrease the treble level.
BAL
Decrease the level of the left
FAD
Decrease the level of the front
VOL
the sound
LAC-M1600/1601/1610/1611
speaker(s).
speaker(s).
Decrease the level of the
right speaker(s).
Decrease the level of the
rear
speaker(s).
Note
The unit
can
adjust
the
bass, middle and treble in the User1, User2, EQ OFF
13
or
XDSS OFF.
Radio
operation
to radio stations
Listening
Press the SRC to select the radio.
1
Press the BAND
2
The indicator
Seek
3
tuning
The tuner will
repeatedly
to select
a
band.
lights up in the following order. FM1 t FM2 t FM3 t MW(AM)
: Press ?m/M? (?m m/M M? on the remote control).
scan
the
until
frequencies
a
broadcast with
strong enough reception is
found.
Manual
for
The
up
or
down
(Press the ?m m/M
repeatedly.) repeatedly.
step by step.
frequency
is
being
broadcast in stereo, the
tuning
more
:
Press the m/M
than 2 seconds and then
frequencies
move
M? on the remote control
Note
When the selected
"
"
indicator will
light.
Auto search memory
This function lets you
automatically
1
Press the SRC to select the tuner.
2
Press and hold the AS/PS for
starts from the
Scanning
more
store the 6
strongest broadcast frequencies.
than 1 second.
currently displayed frequency to higher frequencies and stops
preset or the receivable frequencies have been scanned once.
when 6 stations have been
Storing
You
can
and
easily
recalling
broadcast
store up to 6 broadcast
frequencies
for later recall at the touch of
frequencies
a
button.
1
Select the desired
2
Press
one
of the
frequency.
preset station 1
6 for
~
more
than 1 second.
The number you have pressed will flash in the preset number indicator and then remain
lit. The selected radio station frequency has been stored in memory.
3
1 and 2 to preset other stations.
time, you press the same preset station 1
Repeat steps
The next
6 the radio station
~
frequency
is
recalled from the memory.
Note
?
As
?
When
F1, F2, F3 have the same frequency range, up to 18 stations can be preset for FM.
a station is preset on the preset station button on which another station of the same
band has already been preset, the previously preset station is automatically erased.
To
scan
the preset stations
Press the AS/PS
To tune in the
on
the front
panel.
To
stop the scanning, press the AS/PS.
preset stations
Press BAND to select the desired band and press the desired number (1-6).
The number of the preset station 1
6 is displayed and the preset station is received.
~
14
CD/MP3/WMA
Playing
an
operation
Audio CD and MP3/WMA Disc
The unit
Before
can play MP3/WMA formatted recordings on CD-ROM, CD-R or CD-RW discs.
playing MP3/WMA recordings, read the notes on MP3/WMA Recordings on page
18.
This unit memorizes last track from the last disc that is listened. The last track remains in
memory even if you remove the disc from the unit or switch off the unit. If you load
has the track memorized, the track is automatically recalled.
To
directly play
file, press the NUMBER (#)
a
on
a
disc that
remote control and then press the track
number with 0-9 number.
CD
Pause
MP3
1
Press the B/X
2
To return to
Moving
WMA
during playback.
playback, press the
Press the ?m/M?
or
Press the ?m
again.
CD
to another track
the next track
B /X
MP3
WMA
m/M M? on the remote
(?m
control) briefly during playback to go
beginning of the current track.
remote control) twice briefly to step back to the previous
to return to the
(?m
m on the
track. (If playing times is less then 3 seconds, there is
Press and hold the m/M
Intro
1
operation.)
CD
Search
playback
no
(?m
and then release at the
CD
scan
MP3
m/M M? on remote
point
control)
for about 1 second
you want.
WMA
Press the SCAN.
The
(The
WMA
SCAN appears in the display window. MP3
first 10 seconds of each files in the current selected folder
The SCAN appears in the display window. CD
(The first 10 seconds of each files on the disc are
Press and hold SCAN for about 2 seconds
on
the disc
are
played.)
played.)
during playback.
WMA
The SCAN appears in the display window. MP3
(The first 10 seconds of each files on the disc are played.)
2
Press SCAN
The SCAN
(The
intro
Repeat
1
again.
or
scan
is
CD
Press the RPT
SCAN disappears
cancelled.)
MP3
in the
during playback.
Press and hold RPT for about 2 seconds
(The
2
RPT appears in the
current selected folder
Press the RPT
The 1 RPT
or
window.
WMA
The 1 RPT appears in the display window.
(The current selected music on the disc is
The
display
display
on
CD
window.
the disc is
MP3
WMA
played repeatedly.)
during playback.
MP3
WMA
played repeatedly.)
again.
RPT
disappears
in the
display
window.
15
(The repeat
mode is
cancelled.)
during
to
CD/MP3/WMA
CD
Random
1
Press the SHF
The
(The
MP3
operation
WMA
during playback.
SHF appears in the display window. MP3
current selected folder on the disc is played
WMA
randomly.)
The SHF appears in the display window. CD
(All of the music on the disc is played randomly.)
Press and hold SHF for about 2 seconds
during playback.
WMA
The SHF appears in the display window. MP3
(All of the music on the disc is played randomly.)
2
Press the SHF
The SHF
again.
SHF
or
disappears
in the
window.
display
(The
random
playback
is
cancelled.)
Note
During
random
back to the
playback, if
previous track.
you press the ?m
CD
CD TEXT / ID3 TAG
MP3
These discs may contain such information
called CD TEXT discs.
playing
a
disc
m on remote
as
the disc
on
title, artist's
during
name
containing information, you can see the
or Album) in the display window.
display window.
repeatedly during
MP3/WMA file
MP3
MP3/WMA TRACK -10/+10
WMA
press the F- to go back to the
forward to the next 10 track.
MP3
there is
previous
WMA
press the F- to go back to the
forward to the next folder.
During playback,
If there is
name
(Folder
no
and
are
name, File
information, "NO
playback.
(If
During playback,
MP3/WMA FOLDER UP/DOWN
you won't go
manufacture.
and album
information
name, ID3 TAG, Title, Artist
TEXT" will be shown in the
Press the DISP
control),
WMA
Some discs have certain information encoded
When
(?m
(If
no
10
there
folder
or one
folder.)
track, and press the F+
are more
previous folder,
than two
to go
folders.)
and press the F+ to go
Note
Time
some
display appearing
on
the
display part when playing VBR file may vary and
(both progress time and VBR are displayed at
difference from actual time
time when
playing file).
16
there may be
the
same
Troubleshooting
Cause
Symptom
Correction
Power doesn't
Leads and connectors
turn
properly
on.
The unit doesn't
are
not
connected.
Confirm
once more
connections
The fuse is blown.
Rectify
the
it. Be very
that all
correct.
that caused
problem
the fuse to
operate.
are
blow, and then replace
sure
to install the
correct fuse with the
Noise and other factors
same
Turn the unit off and then
are
rate.
on.
causing the built-in
microprocessor to operate
incorrectly.
Playback
possible.
is not
The disc is
Clean disc.
dirty.
The loaded disc is of
a
type
unit cannot
play.
No sound is
Cables
not connected
heard.
correctly.
are
this
Check what
type the disc.
Connect the cables
correctly.
The volume
level will not
rise.
There's
no
The volume level is low.
Adjust
the volume.
This unit is not
Secure this unit
sound.
There's audio
firmly
secured.
firmly.
skipping.
The unit does
not
operate
correctly
even
Battery power is low.
operations are prohibited
Some
Load
with certain discs.
when the
appropriate
remote control
buttons
are
pressed.
This
product is manufactured to comply with the
requirements of EEC DIRECTIVE
89/336/EEC, 93/68/EEC and 73/23/EEC.
radio interference
17
battery.
using another
new
Check
disc.
Specifications
MP3/WMA Disc
1.
2.
3.
4.
compatibility with this unit is limited
as
follows:
Sampling Frequency / 8 48kHz (MP3) 22.05 48kHz (WMA)
Bit rate / within 8 320kbps (include VBR) (MP3) 32 -320kbps (WMA)
CD-R/CD-RW physical format should be "ISO 9660"
If you record MP3/WMA files using software which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it will not be possible to playback MP3/WMA files. We recommend that you use
"Easy-CD Creator" which creates an ISO9660 file system.
-
-
-
Customers should also note that
in order to download MP3/WMA files and
permission is required
music from the Internet.
Our company has no right to grant such permission.
Permission should always be sought from the copyright
owner.
GENERAL
OutputPower..............................................50Wx4CH(Max.)
PowerSource......................................................DC12V
Speakerimpedance...................................................4-8Ω
GroundSystem....................................................Negative
Dimensions(WxHxD).
.182x51x171mm(WithoutFrontPanel)
NetWeight.........................................................1.35kg
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
CD SELECTION
FrequencyResponse............................................20Hz-20kHz
S/NRatio...........................................................80dB
Distortion............................................................0.1%
ChannelSeparation(1kHz).............................................70dB
RADIO SELECTION
FM
FrequencyRange..............................65-74,87.5-107.9or87.5-108MHz
S/NRatio...........................................................55dB
Distortion...........................................................0.7%
UsableSensitivity..................................................12dBμV
AM
(MW)
FrequencyRange.....................................520-1720or522-1620kHz
S/NRatio...........................................................45dB
Distortion............................................................1.0%
UsableSensitivity..................................................28dBμV
Disposal
of your old
appliance
1. When this crossed-out wheeled bin
covered
by
the
European
symbol
is attached to
a
product,
it
means
the
product
is
Directive 2002/96/EC.
2. All electrical and electronic
products should be disposed of separately from the municipal waste
designated collection facilities appointed by the government or the local authorities.
correct disposal of your old appliance will help prevent potential negative consequences for
stream via
3. The
the environment and human health.
4. For
more
office,
detailed information about
waste
disposal
service
or
the
disposal of your old appliance, please contact
shop where you purchased the product.
P/NO: 3834RR0050L
18
your
city
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising