LG | LAC3735 | Owner's Manual | LG LAC3735 Owner's manual

LG LAC3735 Owner's manual
MODEL : LAC3735
The working life of this product is 7 years since the date of purchase.
LAC3735.DURSLLN_ENG_MFL41655312
ENGLISH
2
7
8
6
2
3
4
5
CAR CD/MP3/WMA Receiver
Mute
Changing the general settings
Using the EQ
Adjusting the sound level
XDSS+
Checking the clock
Setting the clock
Connection
Basic operation
Basic installation
Removing the existing receiver unit
ISO-DIN installation
Battery installation
Installation
Attaching the control panel
Detaching the control panel
Table of Contents
Safety Note
Front Panel / Remote Control(optional)
About Detachable Control Panel
Table of Contents
11
12
10
9
Troubleshooting
Specifications
Pause or restart a CD
Search for a section within a track / file
Skip to another track / file
Intro scan
Repeat
Shuffle
MP3/WMA TRACK -10 / +10
MP3/WMA FOLDER UP/DOWN
See information about your music
Listening a CD
Auto search memory
Storing and recalling broadcast frequencies
To scan the preset stations
To tune in the preset stations
Listening to the Radio
8 cm
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
This unit cannot play 8cm disc (use 12cm disc only).
The temperature of unit’s outside can be extremely high, please use the
unit after proper installation in your vehicle.
To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.
To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside.
Refer servicing to qualified service personnel.
Do not use for many hours at extremely low or high temperature.
(-10~60°C)
Always operate the vehicle in a safe manner.
Do not become distracted by the vehicle while driving, and always be fully
aware of all driving condition. Do not change settings, or any functions.
Pull over in a safe and legal manner before attempting such operations.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
CAUTION : TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT SPLIT COVER(OR BACK) NO USER
SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
Safety Note
CAR CD/MP3/WMA Receiver
3
You have to set the disc format option to [Mastered] in order to make the
discs compatible with the LG players when formatting rewritable discs.
When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)
Caution
When being connected in a wrong way, the unit displays as follows.
1. Antenna port short : “ANTENNA ON PORT SHORT CIRCUIT CHECK”
2. Remote port short : “REMOTE ON PORT SHORT CIRCUIT CHECK”
3. Antenna port and Remote port short : “ANTENNA REMOTE ON PORT
SHORT CIRCUIT CHECK”
After connecting it again, restart the unit.
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately
from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance,
please contact your city office, waste disposal service or the shop where
you purchased the product.
CAUTION : This product uses a Laser System.
To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference.
Should the unit require maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.
ENG
4
CAR CD/MP3/WMA Receiver
EJECT Z
[MUTE]
• Skip M?+
• Seek M?+
4 Remote Sensor (Optional)
5 • Volume
• Power [PWR]
6 • Auto Store [AS]
• Preset Scan [PS]
• Equalizer [EQ]
7 DISC SLOT
8 • Search M +
• Tune M +
9 Display [DISP (CLOCK)]
10 Release
11 Select [SEL S]
1
2
3
15
16
17
18
19
• Folder Up/Down [F+/F-]
Shuffle [SHF]
Repeat [RPT]
Intro Scan [SCAN]
Play/Pause B X
Extreme Dynamic Sound System
[XDSS]
20 [BAND]
21 • Skip - ?m
• Seek - ?m
22 SOURCE [SRC S]
13 Preset Station [1-6]
14 • MP3/WMA Track +10/-10 [F+/F-]
• Tune - m
12 • Search - m
Front Panel / Remote Control (Optional)
Power [POWER] / Mute
Select [SEL]
Source [SRC]
Play / Pause B/X
Intro Scan [SCAN]
Shuffle [SHF]
• MP3/WMA Track +10
• Folder Up [F+]
8 • CD Skip
/ Search ?m m
• Seek / Tune ?m m
9 [BAND]
10 Volume Up
/ Down
11 Number [#]
1
2
3
4
5
6
7
9
8
5
6
7
4
3
2
1
Repeat [RPT]
Preset Station [1-6]
Number [0 -9]
• CD Skip
/ Search M M?
• Seek / Tune M M?
16 Display [DISP.]
17 • MP3/WMA Track -10
• Folder Down [F-]
12
13
14
15
17
16
15
12
13
14
11
10
Align the left side of the panel with
the stopper.
Push the right side or panel into the
unit until it clicks.
• Do not allow such volatile agents as benzine, thinner, or insecticides to come
into contact with the surface of the control panel.
• Do not drop the control panel or otherwise subject it to strong impact.
• Do not leave the control panel in any area exposed to high temperatures or
direct sunlight.
Caution
• The control buttons may not work properly if the control panel is not attached
properly. If this occurs, gently press the display.
1
2
2
1
Attaching the control panel
About Detachable Control Panel
Note
4
3
4
2
Press the “
” (RELEASE) to
open the control panel.
Hold the right part of the control
panel.
Pull out the control panel.
Place the control panel in the
supplied protective case.
CAR CD/MP3/WMA Receiver
5
Periodically wipe the contacts on the back of the control
panel with a cotton swap moistened with alcohol. For safety,
turn off the ignition before cleaning, and remove the key
from the ignition switch.
Protective Case
Control panel
3
2
1
1
Detaching the control panel
ENG
1
2
3
4
Remove the existing receiver unit.
Make the necessary connections.
Install the installation sleeve.
Install the unit into the installation
sleeve.
Before installing, make sure that the
ignition-switch is set to OFF and
remove the terminal of the car battery
to avoid short-circuiting.
6
A
CAR CD/MP3/WMA Receiver
A
3
2
1
Remove the rear support from the
unit.
Remove the control panel and trim
ring from the unit.
Insert the lever A into the hole on
one side of the unit.
Perform the same operation on
the other side and pull the unit out
from the mounting sleeve.
If there is already an installation
sleeve for the receiver unit in the
dashboard, it must be removed.
Removing the existing receiver unit
Control panel
Bend the claws
according to
the thickness
of the
dashboard
Basic Installation
Installation
3
2
1
3
2
1
5
6
4
3
2
1
Pull out the battery holder with a
sharp product like a ball point pen.
Put the battery with
and
correctly on the battery holder.
Push the battery holder back into its
original position.
Slide the unit into the ISO-DIN
frame.
Fit screws removed from the old
unit.
Slide the unit and frame into the
dash opening.
Install the dash panel or adapter
plate.
Install the trim ring to the unit.
Install the control panel to the unit.
Note
• Use only one CR2025 (3V) lithium battery.
• Remove the battery if the remote control is not used for a long period of
time.
• Do not leave the product in a hot or humid place.
• Do not handle the battery with metallic tools.
• Do not store the battery with metallic materials.
Battery Installation
Control panel
6
5
4
ISO-DIN Installation
7
8
7
8
5
6
5
6
3
4
3
4
1
2
1
2
(Optional)
Ignition Switch
Dimmer Switch
Power
Antenna
BATTERY
Control Relay
B 8
B 7
B 6
B 5
B 4
B 3
B 2
B 1
Front Left
Rear Left
Front Right
Rear Right
To Audio out
Remote On(Blue/White)
Phone Mute(Orange)
A1, A2, A3 : Not connected
A8
Ground(-)(Black)
A4
To Battery(+)(Yellow)
A7
To Ignition(Red)
A6
Dimmer(Pink)
A5
Power Antenna(Blue)
A
B
B
B
B
B
B
B
B
B
Amplifier
(Optional)
CAR CD/MP3/WMA Receiver
7
Violet : Rear Right +
Violet/ Black Stripe : Rear Right –
Gray : Front Right +
Gray / Black Stripe : Front Right –
White : Front Left +
White/Black Stripe : Front Left –
Green : Rear Left +
Green/ Black Stripe : Rear Left –
To Audio in
1
2
3
4
5
6
7
8
Amplifier
(Optional)
Before connecting, make sure that the ignition switch is set to OFF, and remove the battery # terminal to avoid short circuits.
Connection
ENG
Rotate PWR
1 Press the DISP and then, press and hold DISP for more 1 second.
2 Press the M?+ to adjust the hour.
3 Press the - ?m to adjust the minute.
8
CAR CD/MP3/WMA Receiver
Press SEL [S] (SEL on the remote control) repeatedly to select the mode you
want to adjust from volume, balance and fader.
Adjusting the sound level
EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ repeatedly. The indicator lights up in the following order.
POP t CLASSIC t ROCK t OFF
Using the EQ
1 Press and hold SEL [S] (SEL on remote control) so that one of menu items
appears.
2 Press SEL [S] (SEL on remote control) and Rotate PWR. (Press VOLUME
on the remote control.) to select one of the settings specified belows.
3 Press and hold SEL [S] (SEL on remote control) to finish the setting..
DEMO OFF/ ON
You can change the initial indication on the display to information name
(function name, EQ name, etc...) while listen to a source.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
Changing the general settings
Setting the clock
on the remote control) to cut the sound. To cancel it,
You can see the clock pressing DISP (DISP. on the remote control)..
Checking the clock
Press XDSS. (XDSS+ : Improves the treble, bass sound.)
XDSS+ (Extreme Dynamic Sound System)
Note
When EQ and XDSS+ is set to “Off”, you can adjust the sound level (BAS,
TRB) settings.
Press MUTE (POWER
press again.
VOLUME
SRC
POWER
ON REMOTE
Mute
Basic operation - more you can do
3. Adjust the volume.
PWR
SRC S
2. Select a source.
ON PLAYER
1. Turn the unit on.
Basic Operation
BAND
- ?m/M? +
- m/M +
2. Select a band.
3. Auto seek.
Manual seek.
Press .bb/BB>
Hold .bb/BB>
BAND
SRC
ON REMOTE
Press BAND to select the desired band and press the desired preset button 1-6
(preset button 1-6 on the remote control).
Note
• Up to 24 stations, 6 for each of three FM bands and 6 MW(AM) stations can
be stored in the memory.
• When a station is stored on the preset numbers on which another station of
the same band has already been preset, the previously preset station is automatically erased.
To tune in the preset stations
Press AS/PS. Each preset station appears. To cancel, press AS/PS.
To scan the preset stations
1 Press BAND to select desired band you want to store.
2 Select the desired frequency and press one of preset buttons 1-6 and hold
until the beep sound.
3 Repeat steps 1-2 to preset other stations.The next time, you press the same
preset button, the radio station frequency is recalled from the memory.
Storing and recalling broadcast frequencies
Press and hold AS/PS for more than 1 second. The six strongest broadcast frequencies will be stored under preset button 1-6 in the order of their signal
strength.To cancel, press AS/PS.
Auto search memory
Listening to the radio - more you can do
SRC S
1. Select a source to tuner.
ON PLAYER
Listening to the Radio
CAR CD/MP3/WMA Receiver
9
ENG
Rotate PWR
ON PLAYER
VOLUME
ON REMOTE
10
CAR CD/MP3/WMA Receiver
Press or press and hold RPT on the player or on remote control. The current
selected tracks/files (1 RPT) or folder (
RPT) on the disc is played repeatedly. Press the RPT again to cancel it.
Repeat
Press or press and hold SCAN on the player or on remote control. The first 10
seconds of each tracks/files in the current selected folder (
SCAN) or each
tracks (SCAN) on the disc are played. Press the SCAN again to cancel it.
Intro scan
move on remote control to move the files/track.
Press - ./> + on the player or .bb/BB> on remote control. If you
want to skip to previous track or file, press briefly - . (.bb on remote control) within 3 seconds of playing time. Press [#] and a number you want to
Skip to another track / file
Press and hold - m/M + on the player or .bb/BB> on remote control
for about 1 second during playback and then release at the point you want.
Search for a section within a track / file
Press B[] on the player or B/[] on the remote control during playback. Press this
button again to resume play.
Pause or restart a CD
Listening a CD - more you can do
2. Adjust the Volume.
1. Insert a CD.
Listening a CD
Customers should also note that permission is required in order to download MP3/WMA files and music from the Internet. Our company has no
right to grant such permission. Permission should always be sought from
the copyright owner.
•
: The icon is displayed during MP3/WMA playback.
• MP3/WMA Disc compatibility with this unit is limited as follows:
1. Sampling Frequency / 8 - 48kHz (MP3) 22.05 - 48kHz (WMA)
2. Bit rate / within 8 - 320kbps (include VBR) (MP3) 32 -320kbps (WMA)
3. CD-R/CD-RW file system should be “ISO 9660”
4. If you record MP3/WMA files using software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it will not be possible to playback
MP3/WMA files. We recommend that you use “Easy-CD Creator” which creates an ISO9660 file system.
5. WMA decoder is supported until “Class 2A”.
MP3/WMA files often come with tags. The tag gives the Title, Artist or Album.
Press DISP repeatedly during MP3/WMA/CD TEXT file playback. If there is no
information, “NO TEXT” will be shown in the display window.
Note
See information about your music
(If there are more than two folders.) During playback, press F - to go back to
the previous folder, and press F + to go forward to the next folder.
MP3/WMA FOLDER UP/DOWN
(If there is no folder or one folder.) During playback press F - to go back 10
tracks, and press F + to go forward 10 tracks.
MP3/WMA TRACK -10 / +10
Note
During random playback, if you press - . (?m m on remote control), you
won’t go back to the previous track.
Press or press and hold SHF on the player or on remote control. The current
selected folder (
SHF) or all of the tracks/files (SHF) on the disc is played
randomly. Press the SHF again to cancel it.
Shuffle
Remote
CD
General
Cause
Correction
CAR CD/MP3/WMA Receiver
11
• Confirm once more that all connections are
correct.
• Rectify the problem that caused the fuse to
blow, and then replace it. Be very sure to
install the correct fuse with the same rate.
• Noise and other factors are causing the built- • Turn the unit off and then on.
in microprocessor to operate incorrectly.
No sound is heard / The vol- • Cables are not connected correctly.
• Connect the cables correctly.
ume level will not rise.
There’s audio skipping.
• This unit is not firmly secured.
• Secure this unit firmly.
The playback is not possi
• The disc is dirty.
• Clean disc.
ble.
• The loaded disc is of a type this unit cannot • Check what type the disc.
play.
• Battery power is low.
The unit does not operate
• Load new battery.
correctly even when the
appropriate remote
control buttons are pressed.
Power doesn’t turn on / The • Leads and connectors are not properly.
unit doesn’t operate.
• The fuse is blown.
Symptom
Troubleshooting
ENG
20 Hz-20 kHz
80 dB
0.12%
55 dB
520-1720 or 522-1620 kHz
50 dB
1.0%
28 dBµV
87.5-107.9, 87.5-108, 65-74 or 87.5-108 MHz
55 dB
0.7%
12 dBµV
50W x 4CH (Max.)
DC 12V
4Ω
Negative
180 x 50 x 176 mm (Without Control Panel)
1.3 kg
12
CAR CD/MP3/WMA Receiver
Designs and specifications are subject to change without notice.
General
Output Power
Power Source
Speaker impedance
Ground System
Dimensions (W x H x D)
Net Weight
Tuner
FM
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
AM (MW)
Frequency Range
S/N Ratio
Distortion
Usable Sensitivity
CD
Frequency Response
S/N Ratio
Distortion
Channel Separation (1kHz)
Specifications
P/N : MFL41655312
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising