LG LH-CX440X Owner's manual

LG LH-CX440X Owner's manual
LH-CX440X.NA3RMLS-ENG
DVD/VCR COMBI RECEIVER
Combi Receiver
System
OWNER'S MANUAL
MODEL: LH-CX440
(Main Unit: LH-CX440X
Speakers: LHS-CX440T, LHS-CX440C
LHS-CX440W
CD-R/RW
PAL
Before
please
connecting up, operating or repairing this
read this instruction booklet carefully and
Internet
product,
completely.
Address:http://www.lg.ru
»IUO I‡?EOII‡ˇ
OIUE・‡
LG Electronics
(095)771-76-76
CAUTION
Warning:
To reduce the risk of electric
shock, do
of this
not remove the cover or back
There
product.
are no user-serv-
iceable parts inside. Refer servicing to
qualified service personnel.
To reduce the risk of fire
electric shock, do not expose this
Warning:
uct to
dripping
or
prod-
splashing water, rain,
not place objects filled
as vases, on the prod-
or
or moisture. Do
with water such
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
uct.
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
______________________________
______________________________
Date of Purchase_________________________
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation
exposure.
To prevent direct exposure to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Warning:
Never stare
laser beam.
Warning:
directly
into the
Caution: Do not install this product in a
confined space such as a book case or
similar unit.
This product is manufactured to comply
with the radio interference requirements
of EEC DIRECTIVE 89/336/EEC, 93/68/EEC
and 73/23/EEC.
Notes
on
Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
2
Contents
GeneralFeatures.......................31
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................8
RemoteControl.........................9
RearPanel............................10
InstallationandSetup.
.
.
.
.
.
.
.
.
.11
.
TV&SetTopBox
.11-12
(or another VCR Connections)
Accessory Audio/Video (A/V) Connections to
.
.
.
.
.
.
.
.
.
DVD/VCRCombireceiver................13
RadioAerialConnections................13
SpeakerSystemConnection..............14
SpeakerPositioning.....................15
Mini Glossary for Audio Stream &
Surroundmode.........................16
SoundMode...........................16
.17-21
BeforeOperation-VCRpart.
.17
TuninginavideochannelonyourTV.
.17
Using your receiver for the very first time
SettingtheclockManually................18
Tosetthecoloursystem.................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DeletingTVstations...................21
.22-26
BeforeOperation-DVDpart.
On-ScreenDisplay......................22
InitialSettings.......................23-26
GeneralOperation....................23
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................23
MenuLanguage....................23
DiscAudio/Subtitle/Menu.
.23
DISPLAY...........................24
.
.
.
.
.
.
.
.
.
AUDIO.............................24
5.1SpeakerSetup..................24
.24
DynamicRangeControl(DRC).
.
.
.
.
.
AutoPlay..........................25
DivX(R)VOD.......................25
LOCK(ParentalControl)................26
Rating............................26
.26
Password(SecurityCode).
CountryCode......................26
.
.
.
.
.
.
.
.
.
.
.
.
Operation....................27
Playingatape.......................27-31
.27
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.27
.28
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.28
.30
IfTimerrecordeventsOverlap
.30
Change (Deleting) the Timer Programme
.31-32
PlayingaDVDorVideoCD.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B..........................32
Repeat.............................32
3DSurround.........................32
TimeSearch.........................32
Zoom..............................33
MarkerSearch.......................33
SpecialDVDFeatures...................33
TitleMenu..........................33
DiscMenu..........................33
CameraAngle.......................33
.33
ChangingtheAudioLanguage
.
.
.
.
.
.
.
.
.
.
Subtitles............................33
DVDAudioDiscs.........................34
.35
PlayinganAudioCDorMP3/WMADisc
.36
AudioCDandMP3/WMADiscFeatures
Pause..............................36
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................36
RepeatTrack/All/Off...................36
Search.............................36
Random............................36
RepeatA-B..........................36
3DSurround.........................36
ProgrammedPlayback.....................37
.37
RepeatProgrammedTracks.
.37
ErasingaTrackfromProgramList
.37
Erasing the Complete Program List
ViewingaJPEGDisc......................38
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................38
StillPicture..........................38
MovingtoanotherFile.................38
Zoom..............................38
Torotatepicture......................38
To listen to MP3/WMA music watching picture
.38
SpeakerSetup.........................39
.40
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................40
PlayingaDivXMovieDisc................41
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.42-43
.
OnScreenDisplay....................42
TapeCounterMemoryStop.............42
.42
Friendly User Guide (Video Doctor)
Hi-FiStereoSoundSystem.............43
.43
WideScreenCompatibility16:9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalFeatures.....................44
LastSceneMemory...................44
ScreenSaver........................44
VideoModeSetting...................44
CopyingfromDVDtoVCR................45
.45
Recording from another video recorder
RadioOperation........................45
.46
PresettingtheRadioStations
ListeningtotheRadio..................46
.
.
.
.
ToCleartheStoredRadioStations
TuningintoaStationManually
Tuning into a Station Automatically
.
.
.
.
Vocal.............................24
OTHERS...........................25
PBC.............................25
.
.
.
TVAspect.........................24
DisplayMode......................24
ProgressiveScan...................24
TVOutputSelect....................24
.
.
Search.............................31
.31
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.32
SlowMotion.........................32
Random............................32
.
Howtousethemainmenu..............19
.19
Tuning in TV stations Automatically
.21
TuninginTVstationsManually.
.21
ChangingtheorderofTVstations.
.
MovingtoanotherTITLE...............31
.31
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.46
.47
.47
Reference....................48
LanguageCodes.......................48
CountryCodes.........................48
Troubleshooting.....................49-50
Specification........................51-52
.
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during operation and indicates that the function explained in this
owner's manual is not available
This manual
provides
information
on
the
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
on
that
specific
DVD
video disc.
Notes
Discs
on
location.
Symbol
Handling
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
electric shock.
The exclamation
point alerts you to the presimportant operating and maintenance
servicing instructions.
ence
/
of
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
making
one
to the disc
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
of the following symbols
represented by the sym-
bol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
CD
Audio CDs
MP3
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
MP3 Discs
spray intended for older
WMA
WMA Discs
JPEG
JPEG Discs
Setting
DivX Discs
You must select one of your output
VCR) to view on the TV screen.
DivX
the
vinyl
Output
records.
Source
sources
(DVD
or
?I f you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
until DVD indicator
source
on
the front
of DVD deck is viewed
panel lights
on
the TV
and
output
screen.
?I f you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator
source
4
on
the front
of VCR deck is viewed
panel lights
on
the TV
and
output
screen.
of
Types
Playable
Discs
Regional
code
This DVD
player is designed and manufacplayback of region "5" encoded DVD
software. This unit can play only DVD discs
DVD
tured for
(8cm/12cmdisc)
labeled "5"
DVD audio discs
(8cm/12cmdisc)
Notes
Video CD
(VCD)
(8cm/12cmdisc)
?
on
or
"ALL".
Regional
Codes
Most DVD discs have
numbers in it
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
al code or the disc cannot play.
Audio CD
(8cm/12cmdisc)
?
In
addition, this unit plays DivX file, DVD -R, DVD +R,
-RW, DVD +RW, Kodak Picture CDs, SVCD, and
CD-R / CD-RW that contains audio titles, MP3, WMA,
DVD
5
player's region-
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
and/or JPEG files.
Notes:
?
Depending
ment
or
on
the conditions of the
the CD-R/RW
(or
DVD
recording equip-
-R, DVD +R, DVD
-
RW, DVD +RW) disc itself, some CD-R/RW (or
-R, DVD +R, DVD -RW, DVD +RW) discs
DVD
cannot be
?
?
played
on
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
Do not
use
shaped
or
(the
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
not be available
or
designed by the software
playback features may
some
other functions may be added.
Manufactured under license from
Dolby Laboratories.
Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide
"DTS
Digital
Digital
patents issued and pending. "DTS" and
Digital
Surround"
Theater
Theater
registered trademarks of
Systems,
Copyright 1996, 2003
Systems, Inc. All rights reserved.
are
Inc.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
Gigabytes
much. There
only
two standards for
media, meaning the DVD
erased and re-recorded.
4.38
are
content
Single-sided
discs
can
can
and double-sided discs hold twice
are no
dual
layer single
be
hold
sided recordable
(Video CD)
with
quality
(DVD video discs only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
stereo sound.
MPEG
assigned
easily.
a
reference number
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Chapter (DVD video discs only)
chapter is a segment of a title such
film
interview in
popular compression format used for digital
files that yields very high near-CD quality.
Microsoft
type of coding / decoding
Corp.
audio discs
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
a compressed
images with no limit
DivX
only)
accompanying
feature
name
which is based
on
of
a
the
revolutionary
new
using
new
video codec
MPEG-4
standard for video.You will be able
you to locate it
easily.
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
and still
compression
to play DivX
this DVD/CD/VCR receiver.
A distinct element of audiovisual
information, such
as
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
track of video
of audio.
6
con-
Track
DivX is the
movies
enabling
moving pictures
Joint Pictures
or
or
Scene
On
JPEG
a
additional feature content, or music
album.Each group is assigned a group reference
tent
number
developed by
in
is
may not be recorded.
WMA
Windows media audio file. A
as a scene
series. Each
a
The main audio content
a
you to locate it
chapter
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
or one
Group (DVD
MP3
MP3 is
enabling
A
MPEG is
audio
Title
A title is
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
CDs.
as
discs.
VCD
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
(with multiple angles)
one
and several tracks
Front Panel
EJECT(Z)
the
Ejects
OPEN/CLOSE
Opens
or
closes the disc
PAUSE/STEP(X/C)
(Z)
Pause
playback
of
tape
a
tray.
or a
disc in the DVD
Press
repeatedly
for
temporarily.
frame-by-frame playback.
STOP
Stops playback
of
a
disc
PLAY
Tray (DVD deck)
Insert
a
or
VCR deck
Remote Sensor
Point the DVD/VCR Combi receiver
remote control here.
Disc
tape in the VCR deck.
To
play
back
disc here.
a
recorded
tape
or
or
(x)
tape.
(B)
disc.
REC/ITR (z)
normally or to
Timer Recording.
To record
activate Instant
Cassette
TUNER FM/AM
To
change
between AM
Insert
a
Compartment
(VCR deck)
video cassette here.
and FM bands.
Display
window
DVD/VCR
Select
on
(output select)
of your output sources to view
the TV screen between DVD and VCR.
one
PROG./PRESET
(3/4)
through memorized channels or
to control tracking during playing back a tape (VCR mode).
To tune in the desired station (Radio Mode).
To
scan
up
or
down
INPUT SELECT
Select the VCR deck's
VIDEO/AUDIO
source
(Tuner, A1,
A2
or
AV3)
(Left/Right)
Connect the audio/video
output of
TV/Monitor, Another VCR).
an
external
source
system,
Reverse SKIP/SCAN
DVD: Go to
chapter/track.
beginning
of current
chapter/track
Press and hold for two seconds for
VCR: Rewinds the
tape during the STOP mode
or
a
for fast
fast
or
to
(S/Q)
previous
search.
reverse
reverse
picture
search.
Forward SKIP/SCAN
DVD: Go to NEXT
chapter/track.
(R/T)
Press and hold for two seconds for
a
fast
forward search.
VCR: Advances the
tape during the STOP mode
forward
or
picture
for fast
search.
VOLUME Control
STANDBY/ON indicator
Switches the DVD/CD/VCR receiver ON and OFF.
Turn the knob clockwise to increase
volume,
counterclockwise to decrease the volume.
7
Display
Indicates current
A disc is loaded in the DVD deck.
audio stream.
loaded in the DVD
(Lights
when
a
Window
disc is
deck.)
WMA disc inserted
DVD/VCR Combi receiver is in VCR timer
mode
Indicates the unit is
radio mode.
or a
VCR timer
recording
is
recording
programmed.
DVD to VCR copy is in progress.
DVD/VCR Combi receiver is
Indicates current
surround mode.
Recording
a
tape.
Indicates the unit is
playing
back
a
tape
recorded in Hi-Fi.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
VCD
II PROG
PROLOGIC
RADIO
CHP/TRK
Hi-Fi
DVD
MP3 TV
RPTALLAB
ST
Total
Indicates current
track number
chapter,
or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights
up when
a
JPEG disc inserted.
8
stereo broadcast is
being
received in radio mode.
playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Remote Control
POWER
OPEN/CLOSE, EJECT (Z)
Switches DVD/VCR Combi receiver ON and
-
OFF.
-
0-9 numerical buttons
Selects numbered
in
options
a menu.
EJECT
OPEN/CLOSE
POWER
PROGRAM
Accesses
Program
or removes
Removes
Select the
FM/AM
VCR
AUX
on
the
as
on
the
AUX
AV
CLK/CNT
in the
option
menu.
(b/B):
PROGRAM
CLEAR
SOUND MODE
AUDIO
menu.
REC/ITR
Records
normally
or
Selects
DISPLAY
CLK/CNT
Timer
PR/TRK/PRESET
SET UP/ i
backward*/go to beginning
current chapter or track or go to
previous chapter or track.
VCR: Rewinds the
or
for fast
picture
RETURN
DISC MENU
FORWARD
VCR: Advances the
or
(>)
forward*/go to next
chapter or track.
tape in STOP mode
for fast forward
picture
PR/TRK/PRESET
PAUSE/STEP
REC/ITR
BACKWARD
PLAY
Starts
a
DVD
Selects
PLAY
STOP
PAUSE/STEP
MARKER
SEARCH
S-TITLE
MUTE
DVD disc.
(+/-)
volume.
point during playback.
MARKER SEARCH
ANGLE
REPEATA-B
REPEAT
TV/VCR
CM SKIP
SPEED
TITLE
ZOOM
a
subtitle
Momentarily
menu.
language.
silence the
speaker
of the
DVD/VCR Combi receiver.
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
ZOOM
DVD video
Enlarges
image.
TITLE
Displays
RANDOM
the disc's Title menu, if
available.
REPEAT A-B/SPEED/REPEAT
(G)
angle
into
MUTE
-
playback.
camera
frequency
S-TITLE
-
ANGLE
Selects
menu on a
VOLUME
Displays
FORWARD
(X)
Pause playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
Accesses
Marks any
(A)
Stops playback.
radio stations
a
SEARCH
seconds.
STOP
menu.
MARKER
search.
*Press and hold button for about two
setup
the tuner.
Adjusts speaker
seconds.
DVD: Search
remove
or an
DISC MENU
search.
*Press and hold button for about two
language (DVD)
(CD).
-Displays functions on the TV screen.
-Acknowledges menu selection.
ENTER
tape in STOP mode
reverse
TUNING+
OK
MEMORY
Recording.
DVD: Search
SET UP/ i
Access or
-Enter
TUNING-
(z)
(.)
audio
an
OK/MEMORY/ENTER
activates Instant
BACKWARD
source
AV3).
BYPASS,
LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
audio channel
RETURN
setup
or
AUDIO
To tune in the desired radio station.
Removes the
AV2
PRO
Select programme of VCR or Tuner
Adjusts manually the tape's picture
onscreen.
AV
Selects sound mode between
PR/TRK/PRESET(v/V):
TUNING
Introducin
bands)
SOUND MODE
(left/right/up/down)
an
and AM
selecting the digital signal from
(OPTICAL)
(Tuner, AV1,
Switches among the clock, tape counter
tape remaining modes on the display.
Selects
listening choice. (FM
Selects the VCR deck's
display.
and
b/B/v/V
or
screen.
DIGITAL AUDIO IN
tuner memory.
Accesses On-Screen
the
For
menu.
preset stations from the
DISPLAY,
(CD/DVD
source
the TV
on
Select the DVD/VCR Combi receiver's tuner
track number
a
output
to view
FM/AM Tuner select button
CD/DVD
program menu or a mark
MARKER SEARCH
Press to clear
of
CD/DVD/VCR select buttons
VCR)
menu.
CLEAR
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
-
if
Repeat chapter, track, title,
Repeats sequence.
Selects recording speed.
all.
available.
CM SKIP
Fast forwards
picture
search
through 30
recording.
seconds of
Play
RANDOM
tracks in random order.
Note
This remote control
To
use
To
use
use
the
same
buttons for VCR and DVD functions
(ex. PLAY).
the
VCR, first press the VCR button.
the DVD, first press the CD/DVD button.
9
Rear Panel
AC Power Cord
Plug
ANT.IN
into the power
source.
Connect the aerial
EURO AV2
(VCR
DECODER
IN+OUT/DVD
Connect to Set
Top
this
jack.
RF. OUT
OUT)
Box
using
Connect to
TV with RF cable.
a
or
FM ANTENNA CONNECTOR
another video recorder.
Connect the FM antenna to this
terminal.
4
EURO AV1 AUDIO/VIDEO
Connect to your TV set
(VCR
or
IN+OUT/DVD
OUT)
another video recorder.
S-VIDEO OUT
Connect to
a
S-Video
(DVD OUT)
Input on TV.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS
Connect the six
supplied speakers
to these terminals.
DIGITAL AUDIO IN
(OPTICAL)
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner
Electrostatic
pins of the jacks on the rear panel.
discharge may cause permanent damage to the
Remote Control
Point the remote control at the remote
remote
Angle:
remote
Remote control
Operation Range
press the buttons.
Distance: About 6m
sensor
unit.
and
battery
Detach the
installation
battery
of the remote
(20ft)
from the front of the
AAA AAA
R03
sensor
cover on
the
control, and insert
batteries with
(size AAA)
aligned correctly.
rear
two
and
About 30° in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Installation and
TV & Set
Top
Box
Setup
(or another VCR Connections)
Rear of Set
Box
Top
(or
another
VCR)
VIDEO
OUTPUT
AUDIO OUTPUT
A
D
6
R
66
4
6
InstaliodSeup
6
S
Rear of TV
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
E
Pb
Y
Y(G)
?
Make
on
Pb(B)
Pr
L
AUDIO LOUT
Pr(R)
of the following connections, depending
capabilities of your existing equipment.
one
the
Tips
Depending
?
on your TV and other equipment you
wish to connect, there are various ways you could
connect the DVD/VCR Combi receiver. Use one of
AERIAL
AUDIO ROUT
Basic connections
1.
door aerial to ANT.IN
(A) from your indoor/ outjack on the rear panel of
DVD/VCR Combi receiver.
2.
Connect the
Receiver
supplied RF cable (R) from the
jack on the rear panel of DVD+VCR
to your television's Aerial Input.
S-Video connection
Connect the S-VIDEO OUT
Make
sure
directly
the DVD/VCR Combi receiver is connectto the TV. Select the correct AV
input
on
could be distorted
by
the copy
protection
system.
Basic connections
panel of the DVD/VCR Combi
RCA input jacks on the TV using a
lead (E).
VCR)
a
the TV
(S).
?
The
signal
of S-VIDEO OUT
jack
will
output only
when the function mode is selected to CD/DVD.
?
When you connect the DVD/VCR Combi receiver to
your TV, be sure to turn off the power and unplug
making
any
connections.
rear
connect such
on
Notes
both units from the wall outlet before
(AV)
Connect the EURO AV1 AUDIO/VIDEO
can
using
the S-Video cable
the DVD/VCR
jack
on
Do not connect your DVD/VCR Combi receiver to
TV via your DVD/VCR Combi receiver. The DVD
You
jack
Combi receiver to the S-VIDEO IN
image
2.
Connect the aerial cable
make the best connections.
your TV.
1.
(RF)
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
ed
?
VIDEO
OUT
RF. OUT
Caution
?
T
R
the connections described below.
?
O
S
VIDEO
INPUT
AUDIO INPUT
Set
Top
on
the
receiver to the
RCA-SCART
Box
(or another
using a
to the DVD/VCR Combi receiver
RCA-SCART lead
(D).
11
Progressive Scan (ColorStream
connection
pro)
Connect the EURO AV1 AUDIO/VIDEO socket
on
the
Rear of TV
DVD/VCR Combi receiver to the COMPONENT
VIDEO
INPUT(Y
Pb
Pr) jacks
on
the TV
using
the
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
SCART to RCA cable.
Y
If your television is
high-definition or "digital
ready" television, you may take advantage of the
DVD/VCR Combi receiver progressive scan output
for the highest video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/VCR Combi
Pb
Pr
L
S-VIDEO
VIDEO
INPUT
AUDIO INPUT
INPUT
R
AERIAL
a
Y(G)
Pr(R)
Pb(B)
receiver.
Notes:
?
Set the
menu
?
Progressive Mode to
progressive signal,
for
"On"
see
on
the
setup
page 24.
Once the
setting for progressive scan output is
image will only be visible on a progressive
compatible TV or monitor. If you set Progressive
entered,
scan
an
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed
on
the
display
window.
2)
releasing
it. The video
standard
setting
visible
?
Rear of DVD/VCR Combi receiver
Press STOP and hold it for five seconds before
on a
Progressive
output will be restored to the
picture will once again be
conventional analog TV or monitor.
scan
video connections
and
a
does not work with the
(yellow
VIDEO OUT
analog
jack).
Caution:
You must set the TV
setup
to
use
Output
Y Pb Pr
Select
or
RGB
option on the
signal from the
EURO AV1 AUDIO/VIDEO socket.
(See
12
menu
"TV
Output
Select"
on
page
24.)
Accessory
Audio/Video
(A/V) Connections
to DVD/VCR Combi
receiver
Connect the AV3
jacks on the
component, using the optional
DVD/VCR Combi receiver to the audio/video out
jacks
on
your accessory
audio/video cables.
If the auxiliary devices (e.g. DVD)
input jack of the DVD/VCR Combi
are
equipped
with OPTICAL OUT
jack,
connect them to to the
corresponding
receiver.
DVD
Player (or Digital Device, etc)
InstaliodSeup
OPTICAL
OUT
66
4
666
Radio Aerial Connections
Connect the
supplied FM/AM
loop aerial
aerial for
listening
to the radio.
?
Connect the AM
to the AM aerial connector.
?
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
(supplied)
(supplied)
6
66
4
6
6
Notes
?
To
prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components.
?
Be
sure
?
After
to fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
as
horizontal
as
possible.
13
Speaker System Connection
Connect the
speakers using
To obtain the best
possible
the
supplied speaker
surround
cords.
sound, adjust the speaker parameters; distance, level,
Front
Speaker
(Right)
etc..
Front
Speaker
(Left)
Centre
Speaker
4
Rear Speaker
(Left Surround)
Rear Speaker
(Right Surround)
Subwoofer
Notes
?
Be
sure
to match the
speaker
cable to the
terminal
appropriate
on
the
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
?
If you
front
use
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
the
speakers.
?
Do not
remove
the front
of
cover
supplied speaker.
About Ferrite Core
Be
to attach the ferrite
sure
(for connecting
This ferrite
to this
core can
1
core
speaker
cables
unit).
a
reduce noises.
How to attach the ferrite
1. Push the
to the
stopper [a]
core
of the ferrite
a
2
core
2. Wind the Subwoofer cable three times
to open.
on
A
B
the ferrite
4
core
(A).
ferrite
Wind the Subwoofer cable
core
once on
the
(B).
3. Pass the others
straight
4. Close the ferrite
core
on
the ferrite
core
(B).
until it clicks.
Make the
as
3
A
Notes
?
Take
care
ferrite
14
not to
cores.
pinch
the
speaker
cables between the
B
short
length here
possible.
as
Speaker Positioning
In the
of normal
case
position
the 6
use
front
speakers (2
centre
speakers,
speaker,
2
and
speakers
rear
subwoofer).
If you want to
a
?
?
play
the excellent bass
sound, DTS digital surround
or
Dolby Digital surround,
you should connect
subwoofer.
Front speakers
According to your listening position set up
interval between speakers to 45 degree.
Centre
speaker
speakers
The centre
and front
speakers
the
speakers
the
ideally
are
for
distance. And
equal
same
But
height.
by hearing position
normally place
it above
set up the
or
InstaliodSeup
below the
television.
?
Rear
speakers
Place left and
right
for surround sound
behind the
playback.
position and install them
speakers towards a wall
In the
other, and
?
of
case
a
smaller
set the
rear
listening
For best
These
speakers
or
ceiling
to further
disperse
size, if the audience is
speakers
above 60
-
90
recreate sound motion and
not install the
above the level of the listener's
at
or
room
area.
results, do
cm
speakers
rear
ears.
atmosphere required
listening
too far behind the
It is also effective to direct the
rear
the sound.
near
to the
rear
than the listener's
wall set the
rear
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Rear Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
15
Mini
Glossary
for Audio Stream
produce a 3D Surround effect, using 3D
technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to lis-
& Surround mode
Allows you to
can
Surround Sound
discrete channels of
enjoy 5.1(or 6)
3D SURROUND
This unit
high
ten to multi-channel audio from
audio from DTS program sources such as
DVD and compact discs, etc.bearing the trademark.
a
home theatre. This feature
quality digital
works with DVD discs encoded with
discs,
Dolby Digital
DTS
Digital Surround delivers up to 6 channels of transparaudio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
ent
sound field. The term DTS is
Technology,
Technology,
a
trademark of DTS
LLC. Manufactured under license from DTS
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy,
and improved dynamic range.
Use this mode when
playing
nel which carries the
"
effect of
being
effect with
DOLBY
in
which
PRO
LOGIC
can
"
Dolby Digital 2 chanThis mode provides the
or
mark.
movie theatre
a
intensity
an
movie
"
or
live concert house-an
only
SURROUND.
be obtained
The
through
effect
of
according
to the way it
was
signals
Logic
This is done
You
can
one
of the
enjoy surround sound simply by selecting
pre-programmed sound fields according
any
spatial properties
new
sounds
or
of the
to
the
program you want to listen to.
Press SOUND MODE
repeatedly until the sound
display window as
mode you want appears in the
below.
Each time you press SOUND MODE button, the
sound mode is changed in the following order;
PRO LOGIC
→
→
PL2 MOVIE
3D SURROUND
→
PL2 MUSIC
→
→
PL2 MATRIX
BYPASS
When DVD is inserted.
You
can
change
the stream of DVD
(Dolby Digital, DTS,
on
the remote dur-
output chan-
used.
an
advanced, high-purity matrix surround decoder that
the
played
using
II creates five full-bandwidth
sources.
is
recorded.
ing playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is
(II)
Dolby
and
BYPASS
Software with multichannel surround audio
PCM, etc) by pressing the AUDIO button
nels from two-channel
Logic
the
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much clearer and more dynamic than before.
Pro
Pro
Sound Mode
LLC.
"
Dolby
audio tracks.
original recording
extracts
without
adding
tonal colorations.
Each time you press AUDIO button, the sound mode of DVD
changed as the following order;
is
→→→
MOVIE mode:
The Movie mode is for
use
with stereo television shows and
all programs encoded in Dolby Surround. The result is
enhanced soundfield directionality that approaches the
quality
of discrete 5.1-channel sound.
For your reference
?
The Music mode is for
and
provides
a
with any stereo music recordings,
wide and deep sound space. The Music mode
use
?
includes controls that allow the sound to be tailored to individual
listening
The DVD/VCR Combi receiver memorizes the
last mode
MUSIC mode:
tastes.
settings
for each source
You
identify
individually.
encoding format of
program software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
can
the
-
MATRIX mode:
-
The Matrix mode is the
same as
the Music mode
except that
the directional enhancement
logic is turned off. It may be used
signals by making them seem "larger." The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
cause disturbing surround signals from a logic decoder. The
ultimate "cure" for poor FM stereo reception may be simply to
to enhance
force the audio to
16
-
mono
mono.
Note
?
When you play sound tracks with 96kHz sampling
frequency, the output signals will be converted to 48kHz
(sampling frequency).
Before
in
Tuning
a
Operation-VCR part
video channel
on
your TV
Notes
?
The
output frequency of this video recorder (VCR) is
set at UHF channel 36. If channel 36 is
used
another TV
by
station,
or
if the
already
picture is
RF
distorted, you can change the transmitter channel of
8 will
your DVD/VCR Combi receiver. Stages 5
show you how to change the output frequency of
7.
TV receives
signals
You
channel number
ally
1.
on
dedicated video channel built into
a
Insert
a
on
your DVD/VCR Combi
on
your TV.
pre-recorded
tape into your
which you wish to watch video's.
Don't worry if you don't have a video-tape to
~
seeing video playback
a bright blue screen.
tune your TV until you
Tune this channel until the video
picture
is
see
sharp
and the sound is clear.
4.
appears. Store this channel
dedicated video channel
tune in
already pre-tuned
for
your TV.
tapes!
preset
-
If this menu does not appear, your
recorder was programmed already.
Select the
F andG.
country according
to your
area
video
with
Austria, "B": Belgium, "CH": Switzerland, "D":
Germany, "DK": Denmark, "E": Spain, "F": France,
"I": Italy, "N": Norway, "NL": Netherlands, "P":
Portugal, "S": Sweden, "SF": Finland, OTHERS.
Only carry out stages 5 8 if you cannot
obtain clear video playback as described in
~
stages 1
4. Select
~
a
TV channel number
on
which you wish to watch video's.
Make sure that your DVD/VCR Combi receiver is
in standby pressing POWER on the remote control
(only
6.
a
your TV. If you do not
dedicated video channel on your TV you will
on
"A":
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5.
your TV.
For the following steps we do assume that you have
just connected your video recorder for the very first
time. In this case the video recorder is on after mains
connection. You should not touch any buttons yet. On
the connected TV you will now see.
1.
on
a
Initial
channel. The AV channel is
playback
on
sure that you have correctly installed your
DVD/VCR Combi receiver and successfully tuned in
Note
video
which you wish to
Notes
If you have used a RCA-SCART cable you will not
have to tune your TV, simply select the AV
optimum
on
play
If you switch your DVD/VCR Combi
and continue stages 3
4, instead of
on
TV channel number
be unable to view and record video
stage!
receiver
a
Make
video
DVD/VCR Combi receiver and press PLAY on the
remote control. Select a TV channel number on
at this
Select
Press
STANDBY/ON on the front of your
DVD/VCR Combi receiver when you have finished.
Tune this channel so that a bright blue screen
usu-
that you have correctly installed your
described earlier in this book.
Press POWER to turn
can
watch video's.
sure
as
receiver. Turn
3.
8.
called AV.
Make
VCR
2.
it,
4 to select another video channel. You
also set it to "OFF" if there is any interferwhen your TV is connected to the DVD/VCR
Combi receiver with a RCA-SCART lead.
a
your TV and tune it in so that
watch
video
you may
tapes. If you have used a
RCA-SCART cable then your TV should already
have
or
ence
from the video recorder
like another TV station. You have to select
(VCR)
Press 3
68.
your DVD/VCR Combi receiver.
our
36
may select any channel number between 22 and
~
?Y
KAHA
PSET
R
the clock will be
Press PROG. 3
or
displayed).
4 on the front of your DVD/
VCR Combi receiver for
more
A
BD
CH
NN L
DK
EFI
PSSF
Pr-12
ACMS
2.
Press OK to start the automatic storing of the
channels of the TV stations in your area.
than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
01
C02
00
PR-01
screen.
Pr-12
S
E
ACMS
17
Setting
the clock
To set the colour
Manually
The clock in your DVD/VCR Combi receiver controls
time and date settings for your DVD/VCR Combi
receiver.
1.
Press i.
Press 1
or
2 to select TIME DATE.
1.
Press i.
2.
The main
3.
Press 1
4.
Press 3
system
Press OK.
menu
system
will appear
on
the TV
screen.
or
2 to select the SYSTEM and press OK.
or
4 to select
according
to the COLOUR
used.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
VCR
REC
TIME
DATE
2.
ON
OFF
Use the numbered buttons
to alter the
MONTH and
5.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
day
16:9
4:3
OPR
the remote control
on
HOURS, MINUTES, DAY,
YEAR.
The
Dr.
fOSD
of the week will appear
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
according
to the RF AUDIO
used.
automatically
when you enter the year.
VCR
REC
E
Dr.
fOS
ON
OF
HHMNDDMMYY
8
:.
00101
.
THU
TIME
DATE
6.
3.
If you make
a
correct details.
4.
18
Press i.
mistake press 1
or
2 and enter the
Press i to
remove
the
menus
from the TV
screen.
How to
the main
use
This DVD/VCR Combi receiver
the
programmed by using
screen.
The
menus are
Tuning
menu
easily be
displayed on
If the TV broadcast
can
menus
controlled from the Remote
Control Handset.
Switch
your TV set and DVD/VCR Combi
receiver by pressing the POWER button.
1.
in TV Stations
on
Automatically
is weak your DVD/VCR
signal
Combi receiver may not detect the necessary
information and will not be able to store them
correctly.
To
overcome
this
problem please
the MANUAL TUNING section
turn to
page 19.
on
Press i button.
2.
The main
menu
will appear
on
the TV
screen.
1.
Press POWER to turn
on
your DVD/VCR Combi
receiver.
2.
Press i button.
The main
Press 1
will appear on the TV screen.
2 to select the ACMS. Press OK.
menu
or
VCR
PSET
R
Pr-12
TIME
DATE
ACMS
ON
OFF
?
Dr.
OPR
recording setting (see
p.
29).
12
Pr-12
REC
PRSET
Manual
?
16:9
4:3
REC
Timer
?
SYSTEM
NIC
fOSD
PSET
R
ON
OFF
tuning setting (see
p.
TIME
DATE
VCR
SYSTEM
Dr.
Pr-12
NIC
fOSD
16:9
4:3
OPR
20).
ACMS
ACMS
(Automatic Channel Memory System)
(see right column).
?
TIME DATE
Date & clock
?
A
setting (see
18).
receiver
Pr-12
System (see
p.
18).
3.
a problem with
(see p. 42).
display
the
your DVD/CD/VCR
operational mode
(see p. 42).
of your DVD/VCR
16:9/4:3
To select the
improve
aspect ratio of your TV (see p. 43).
the
NIC
To activate
(see
p.
playback picture (see
p.
You
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
deactivate the NICAM
digital
S
E
Pr-12
or
ACMS
sound
43).
4.
Press i to
remove
the
menus
from the TV
screen.
change the menu language on the DVD
setup menu (See the Menu Language on page 22).
can
Press 1
or
2 to select the desired
Press OK and press 3
5.
01
27).
Tip:
3.
2 to select COUNTRY.
OPR
To
?
or
process.
Combi receiver
?
Press 1
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, OTHERS)
Press OK again to start the automatic tuning
fOSD ON/OFF
To
?
EFI
ACMS
Dr.
To check
?
p.
DK
PSS F
SYSTEM
To set the Colour TV
?
BD
CH
NN L
Press i to return to
a
or
TV
menu.
4 to select.
picture.
Press i to
save
your
settings.
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
19
in TV Stations
Tuning
In certain
of the
areas
5.
Manually
country broadcast signals
The TV station
may be too weak for your DVD/VCR Combi
receiver automatic tuning process to find or
assign
TV stations
Press 2 to select STATION
so
that you may
name
your TV station.
Press OK.
list will appear.
name
correctly.
You must tune in these weaker broadcast
manually in order for your DVD/VCR
Combi receiver to store them.
PR
CH
MFT
09
C10
00
stations
1.
PSET
R
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
6.
screen.
PR
CH
E to select
or
station
a
name
from the list.
Press OK to select it.
Press OK.
01
Press D
MFT
STATION
00
PR-01
If your station
name
isn't
OK, but go
stage
7.
to
on
the list do not press
VCR
Pr-12
REC
ACMS
2.
SYSTEM
Dr.
CHANNEL/CABLE
NIC
fOSD
ON
OFF
TIME
DATE
16:9
4:3
:
AV
PSET
R
OPR
PR
CH
MFT
09
C10
00
Press i.
PSET
R
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune
(for example,
PR
7.
09).
You
can
change a TV station name manually
using the "standard" names.
rather than
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
Press G.
Press 3
or
the
station
new
Press 1
or
4 to select letters and numbers for
2 to
name.
move
back and forth between
characters.
,
Press OK.
3.
Press OK.
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
-
C69, S01
PR
C09
-
CH
MFT
C10
00
STATION
S41.
Enter the channel number of station that you want
PSET
R
to tune with the numbered buttons
to find the
required
or use 3 or
4
station.
8.
Press i, confirm the station
Press i again.
Your
PR
CH
09
MFT
STATION
--
----
CHANNEL/CABLE
:
new
TV station has
now
placement.
been tuned into your
VCR.
If you wish to
8.
stages 1
AV
manually
tune other stations
-
PSET
R
4.
Searching
will
stop when it locates
Press 2 to select MFT.
Press 3
or
4 to
a
station.
10
11
12
13
14
15
adjust.
16
PSET
R
PR
CH
09
C10
MFT
STATION
CHANNEL/CABLE
PSET
R
20
:
AV
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
repeat
the order of TV Stations
Changing
After
TV stations into your DVD/VCR Combi
change the order in
tuning
TV Stations
Deleting
After
TV stations into your DVD/VCR Combi
tuning
receiver you may wish to
receiver you may wish to delete a station.
which
The instructions
they are stored without having to retune them
against! The instructions given on this page will
show you how you can simply move them into
how
1.
your desired order.
1.
Press i.
The main
Press 1
Press i.
The main
Press 1
given on this page will show you
delete any unwanted TV stations.
easily
will appear on the TV
2 to select the PR SET.
menu
or
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
screen.
Press OK.
PR
CH
MFT
STATION
00
PR-01
01
VCR
Pr-12
REC
PR
CH
MFT
STATION
00
PR-01
01
ACMS
TIME
DATE
Dr.
CHANNEL/CABLE
NIC
fOSD
ON
OFF
SYSTEM
16:9
4:3
:
AV
PSET
R
OPR
VCR
Pr-12
REC
ACMS
ON
OFF
2.
TIME
DATE
SYSTEM
Dr.
16:9
4:3
:
AV
2.
PSET
R
OPR
Press 3
or
4 to select the
move
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
(for
programme number
example, PR 03).
PR-08
:
DELETE
:
01
C02
00
02
C03
00
PR-01
PR-02
03
PR-07
MOVE
or
programme number
PR
(for example,
03)
4 to select the
or
you want to
Press 2.
Press 3
Press i.
you want to delete.
Press i.
Press 3
3.
CHANNEL/CABLE
NIC
fOSD
04
C05
00
PR-04
05
C06
C07
00
PR-05
06
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
3.
PR-07
PR-08
MOVE
:
DELETE
:
,
Press 1.
After
a
short
while, the selected station will be
deleted.
PSET
R
,
02
4 to select
the programme number you want to
example, PR 05).
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
PR-02
PR-04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
04
move
to
(for
01
C02
00
PR-01
02
C03
00
PR-02
04
C06
00
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
08
C09
00
PR-07
PR-08
MOVE
DELETE
PSET
R
:
:
,
05
4.
Press i to
remove
the
from the TV
menus
If you wish to delete other TV stations
stages 1 3.
PSET
R
screen.
repeat
-
4.
Press OK.
The selected programme will be moved to the
new programme number.
If you wish to move other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
01
C02
00
02
C03
00
PR-02
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
PR-01
-
08
MOVE:
DELETE
PSET
R
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
P
R SET
MOVE
:
DELETE
:
,
How to
selecting Stored
Stored TV stations
ways.
Press 3
or
can
:
,
TV stations:
be selected in either of two
4 to select different stations that are tuned
into your DVD/VCR Combi receiver.
You may also directly select stations
numbered buttons
on
using
the
the remote control.
21
Before
Operation-DVD part
On-Screen
You
use
general playback status on the TV
can be changed using the menu.
on-screen display:
display
can
the
Some items
screen.
To
Display
the
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
item.
inputting
change
the title
the
For
number).
also
functions,
some
setting.
Some discs may not
shown below.
provide
0:20:09
Display only
DVD Audio
Subtitle
Notes:
b/Bor
mode
language
AUDIO
OFF
ABC
Display only
all of the features
Page (or Angle)
b/Bor
ANGLE
or
If
?
no
button is
pressed for 10 seconds,
display disappears.
screen
the
on-
Playback Status/Restrictions
Repeat title
1/9
Repeat
sequence
Enter
Marker
MARKER SEARCH
123456789
Selection Method
Items
Track Number
Marker Search
Resume
Action
a
1/3
Example: On-Screen Display during
playing VCD
TITLE
A-B
play
prohibited
menu
from this
or
(or
PBC
1/3
Numbers
0:20:09
STEREO
Sound
Example: On-Screen Display during
playing DVD Video
Selection Method
1/3
b /
B, Numbers
ENTER
Chapter
Number
1/12
0:20:09
language
and Digital Audio
Output mode
Angle
Sound
22
B, Numbers
language
Numbers, ENTER
b/Bor
AUDIO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Selection Method
Items
Track Number
1/3
b /
B,Numbers
ENTER
Time search
0:20:09
Audio
language
Digital Audio
Output mode
Numbers, ENTER
b/Bor
1
and
Audio
Subtitle
b /
ENTER
Time search
ENTER
b/Bor
Audio Channel
Title Number
B,Numbers
ENTER
Time search
point
b /
mode)
not available
Items
B,Numbers
ENTER
Time search
Output
B,Numbers
ENTER
b /
Track Number
setting. You can
appropriate (e.g.
press ENTER to execute the
?
b /
Number
highlighted.
the number buttons if
use
Selection Method
Items
Group
during playback.
Press v / V to select
2.
Example: On-Screen Display during
playing DVD Audio
MP3
AUDIO
AUDIO
Subtitle
ABC
1 ENG
language
ABC
ENG
b/Bor
S-TITLE
b/Bor
S-TITLE
1/3
b/Bor
ANGLE
3D SUR
b/B
Sound
3D SUR
b/B
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 23 to 26.
To
display
display
the
Disc Subtitle
Off
Disc Menu
Original
2.
Use v / V to select the desired
Setup
menu
appears.
then press
to the second level. The screen shows
option
the selected
item,
as
move
for the
language
well
as
option
then
Setup
menu
and
on-screen
DVD-V
Use v / V to select the desired
5.
Press SETUP
InstaliodSeup
DVD-A
Refers to the
disc
recorded.
was
original language
Other: To select another
track
in which the
language, press number
corresponding 4-digit
language code list in the
enter the wrong language code,
buttons then ENTER to enter the
according
chapter.
reference
to the
If you
press CLEAR.
to the third level.
4.
Original:
number
Use v / V to select the second desired
press B to
a
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
alternate
Language
Select the
1.
setting for
setting(s).
Menu
Select
Disc Audio / Subtitle / Menu
Operation
the current
Select
display.
To go back to the previous level:
Press b on the remote control.
move
Move
screen.
To go to the next level:
Press B on the remote control.
3.
Original
A second press of
menu.
SETUP will take you back to initial
B to
English
Language
Disc Audio
and exit the Menu:
Press SETUP to
General
Menu
setting then press
ENTER to confirm your selection. Some items
require additional steps.
or
PLAY to exit the
Setup
menu.
23
5.
DISPLAY
Pressing
TV
16
Aspect
Display
Mode
Output
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Off
Select
Progressive
Caution:
Widescreen
Scan
Progressive
TV
9Wide
:
ENTER will set this unit to
mode.
scan
DISPLAY
an
RGB
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
Move
See that "NO DISC" is
Select
Aspect
4:3
:
DVD-V
Select when
DVD-A
a
a
Display
DVD-V
Mode
Mode
setting
DVD-A
tray.
window.
works
Output Select
Set this unit TV
only
when the TV
Aspect
mode is set to "4:3".
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
on
the
Panscan: Automatically displays the wide picture on
the entire screen and cuts off the portions that do not fit.
TV connection
Output
Select
options according
to the
type.
YPbPr: When your TV is connected with the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
AUDIO
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn On
display
16:9 wide TV is connected.
TV
Display
the
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
standard 4:3 TV is connected.
16:9 Wide: Select when
on
Press STOP and hold it for five seconds before releas-
2)
TV
displayed
progressive
Each DVD disc has
variety of audio output options.
options according to the type of
a
Set this unit AUDIO
audio
system you
use.
AUDIO
5.1
scan:
Select
Speaker Setup
DRC
On
Vocal
On
Connect
component out of this unit to the input of
your monitor/television, set your television or monitor
to
Component Input.
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
Move
then press B.
DISPLAY
TV
DVD-A
Speaker Setup DVD-V
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 39.)
5.1
Select
Aspect
Display
Mode
Progressive
TV
Output
Select
Scan
On
Off
Select
Dynamic Range
Control
(DRC)
DVD-V
DivX
DVD-A
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
4. When the confirm
Cancel is
to
24
With the DVD
format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
Vocal
menu
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
DVD-V
Set to On
playing.
only
DVD-A
when
a
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
on
the disc mix into
OTHERS
The
DivX(R)
PBC, Auto Play and DivX(R) VOD settings
can
be
changed.
VOD
DivX
You
can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
OTHERS
PBC
Auto
On
DivX(R)
DivX(R)
Off
Play
Your
Select
VOD
Video On Demand
registration
To learn
code is
more
:
XXXXXXXX
visit
www.divx.com/vod
Move
PBC
Set
(Done)
Select
Playback
Control
(PBC)
On: Video CDs with PBC
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
to On
or
Off.
encrypt
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
You
If you rent the DivX VOD file, it has several
limits as shown below.
Display
mode is set to
play
of
can
watch the file.
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
DivX(R)
VOD Rental
This rental has 3 views left.
Do you want to
On, this DVD player will
search for title that has the
then
the number which you
View
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
Play
options
DVD-V
can
If Auto
file.
viewing
?
Play
move
Notes:
Audio CDs.
Auto
InstaliodSeup
The
VCD
use one
of your 3 views now?
time and
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
25
LOCK (Parental
Password
Control)
You
LOCK
Rating
Unlock
Password
New
Country
2. Follow
step
"New" is
Move
DVD-V
Input
Select
Some movies contain
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
alternative.
The
to
shown left
as
new
again
If you
control feature allows you to block
below the rating you input, there
scenes
by
your children from being able to view
material you believe is unsuitable.
4-digit code,
verify.
forget your Security
1.
2.
Press SETUP to
Input
the
"Rating"
3.
Enter
on
the LOCK
menu
Rating, Password and Country Code
input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
must
rating
a
from 1 to 8
1-8:
tions and
using
Rating one (1)
rating eight (8) is
If you select
and the disc
a new
code
DVD-V
Code
the least restrictive.
not active
in full.
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
26
using
menu.
security
described above.
DVD-A
country/area
used to rate the DVD video
Select
whose standards
disc, based
on
the
chapter.
selection, then
Code"
"Country
on
Follow
3.
Select the first character
step
the LOCK
menu
then
Shift the
2
as
cursor
shown left
(Rating).
using
v / V buttons.
using B button and select
using v / V buttons.
the
second character
Press ENTER to confirm your
selection.
a
on
as
2.
5.
has the most restric-
Notes:
available
Setup
clear it
press B.
the v / V buttons.
unlock, parental control is
plays
1.
4.
Unlock
scenes
the
can
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
If you set
the same
menu.
Code
display
Enter the code of the
then
were
features, you
Rating
or
then press ENTER.
number "210499" and the
6-digit
list in the reference
3. Select
then press B.
(Rating). "Change"
If you forget your security code you
the following steps:
Country
press B.
2. To
menu
to
preventing
1. Select
the LOCK
code is cleared.
parental
access
it
2
on
4. Press SETUP to exit the
DVD-A
for children to view.
change password.
highlighted.
3. Enter the
Rating
or
1. Select Password
RU
Code
(Security Code)
enter
can
country code
Operation
a
You will
be able to load and
only
Tape
eject
video cassettes
when your DVD/VCR Combi receiver is plugged into
the mains. Your DVD/VCR Combi receiver may also
playback recordings from
Getting a better picture
When
NTSC
tapes (on PAL TV).
playback started, the
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control or
press PROG. 3 or 4 on the front panel to manually
adjust the tracking until any distortions have been
a
cassette is inserted and
automatic
removed. Press numbered 0
switch automatic
the remote control to
on
back
tracking
on
again.
sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
your TV. Press POWER to turn on your
DVD/VCR Combi receiver. Insert the video cassette
on
into your DVD/VCR Combi receiver. The video cassette should have the window side facing up and
the
arrow
facing
away from you.
2. Press PLAY to start
playing
your tape.
video cassette which has had its
If you load a
record protection tab
cassette will start
If distortions
can
them with D
or
be
in the
seen
picture,
reduce
E.
6. Press STOP to end
InstaliodSeup
playback.
Press EJECT.
If the end of the
tape is reached, your DVD/VCR
stop playback automatically,
rewind, stop, eject the tape.
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
normal
resume
While
playback.
tape is playing press CM SKIP
control to
commercial
skip
material).
Repeatedly press
on
the remote
another programme
(or
CM SKIP to
skip:
2 Press 60 seconds
removed, playback of the
3 Press 90 seconds
automatically.
4 Press 120 seconds
5 Press 150 seconds
Your VCR will
the best
tape.
1 Press 30 seconds
AUTO TRACKING
give
press the desired function.
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of
Combi receiver will
1. Make
Turn
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay) To switch off the slow motion and shuttle,
5. Slow motion
Playing
automatically adjust
picture quality.
the
tracking
to
6 Press 180 seconds
OPR
3. Press PAUSE/STEP to still
Press PAUSE/STEP
picture.
repeatedly to advance
a
(Optimum Picture Response)
automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
This feature
the
tape frame by frame.
If you press FORWARD, the picture will be slowed
the condition of the
down at about 1/19 times the normal
1. Press i.
playback. Tapes
can
be
paused
for up to 5 min-
utes. After 5 minutes your DVD/VCR Combi receiver will stop the tape to prevent damaging the tape
or
ity
2. Press 1
or
tape.
2 to select OPR.
3. Press OK.
your DVD/VCR Combi receiver. Still picture qualcan be improved slightly by pressing 3 or 4.
4. Press PLAY to continue
playing
your tape.
Picture search:
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
where you
are on
the
tape.
Logic search:
During fast forwarding
FORWARD
played
or
ON
OFF
4. Press
3
or 4
16:9
4:3
12
12
MS
rewinding press and hold
picture will be
normal playback speed.
or
VCR
TIME
DATE
SYSTEM
Dr.
NIC
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
or
SHARP.
Please note you may
BACKWARD the
back at 7 times
OFF
SOFT
SHARP
f
playing
a
only
set OPR when
tape.
5. Press i return to
screen.
27
Instant Timer
Recording (ITR)
5.
Instant Timer
Recording (ITR) start recording
a set period of time or until the
for
video cassette
runs
6.
incorporates Long
which enables you to record up to twice
the amount of time on a video cassette. For examE-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to
record up to 360 minutes. Please note there will be
an
slight loss
using LP.
in
picture
Press REC/ITR to start
and sound
quality
7.
Make
Press PAUSE/STEP to avoid
when
Press POWER to turn
on
your DVD/VCR Combi
receiver.
3.
video cassette with
4.
up and the
Press v
8.
protection
tab into
or
arrow
facing
away from you.
V to select the programme number
EJECT will appear
If you wish to record directly from the SCART
sockets repeatedly press AV until the socket you
wish to record from is displayed.
on
the
(Left
&
recording
rear
from EURO AV1 SCART socket
of your DVD/VCR Combi receiver.
from EURO AV2 SCART socket
recording
rear
AV 3 for
tape is paused. After
5
recording.
of your DVD/VCR Combi receiver.
and AUDIO IN
recording from VIDEO IN
Right) sockets on the front
DVD/VCR Combi receiver.
of your
on
the TV
screen
for
a
few
Notes:
If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
record
the
a
seconds.
control.
on
when
Press STOP to end
cassette.
AV 2 for
28
displayed
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
DVD/VCR Combi receiver.
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote
AV 1 for
recording.
Press EJECT.
your DVD/VCR Combi receiver.
The video cassette should have the window side
facing
unwanted
pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
sure
a
recording
If you press PAUSE/STEP during ITR, this
DVD/VCR Combi receiver will enter the record
that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
Insert
recording.
Press PAUSE/STEP to continue
this book.
2.
much
scenes.
will be
1.
sound
as
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Play (LP)
a
or
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
Your DVD/VCR Combi receiver
ple
Long Play
Play.
SP will produce improved picture and
quality, however LP will provide twice
recording time as SP.
Your DVD/VCR Combi receiver allows you to make
recordings using a variety of simple methods:
immediately
Press SPEED if you wish to record in
Standard
It is
possible to record on a video cassette
protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
another by starting your instant recording,
watching
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
recording using On
Display
Timer
6. Press the numbered buttons to enter the
Screen
recording
start
and end times of the programme that you wish to record.
Please note your DVD/VCR Combi receiver uses a
You may set up to seven timer record events
within one month of the current date.
24 hour clock. e.g. 1pm will be displayed as 13:00.
You may also select the the start and end times by
Note
pressing
3
or
Before setting the timer make sure that you have
set the DVD/VCR Combi receiver clock correctly and
you know which stations you have tuned TV
stations on your DVD/VCR Combi receiver.
1. Insert
a
video cassette with
protection
4.
PR
DATE
TIME
16
PR-01
190020
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
tab into your
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
DVD/VCR Combi receiver.
The video cassette should have the window side
facing
up and the
facing
arrow
7. Press 2 to select the
away from you.
Press
or 4
recording speed.
tape speed (SP, IP,
to select the desired
IP mode determines how much
2. Press i.
Press 1
3
or
switches
speed from SP to LP, if
complete recording the program.
2 to select REC.
Press OK.
3. Press OK to start
the timer record event.
setting
PR
full press 3 or 4 to
select the event that you wish to remove and
replace. Press 1 to delete the event.
PR
DATE
DATE
TIME
16
1900
::
2000
PR-01
If all timer record events
are
or
LP).
tape is left and
necessary, to
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
8. Check that the timer event details
SP
--
are
correct.
SP
--
Press i twice.
SP
--
SP
--
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your DVD/VCR Combi
will appear in the display winStandby.
4. Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
the channel
-
dow while your DVD/VCR Combi receiver waits to
make the recording. To watch a DVD during timer
9, press 0 first, then
number; for example Stations
You may also select Channels
Once selected press 2.
3
by pressing
-
3
03.
or
on
for correct
the back of your unit, press AV to select
AV2 or AV3).
display (AV1,
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
recording standby mode,
4.
If you wish to record from AUDIO IN (L/R) and
VIDEO IN on the front or from the EURO SCART
sockets
receiver
SP
SP
SP
press POWER and DVD
to switch to DVD mode.
9. Press STOP to end
recording.
Notes
?
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
SP
change.
SP
SP
Press 1 to delete the event...or
SP
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press
5. Press the numbered buttons to enter the date of
the programme. If you press OK before entering
the date you may select one of the following
automated
features. Press 1
recording
select, then press OK
SU~SATo record at the
PR
2 to
same
DATE
Saturday
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
and
time every week.
TIME
--
?
If Timer record events
Make
SP
SP
SP
SP
3
to enter the correct information.
sure
events do not
Example:
Programme
Overlap...
that the
preset times of the timer recording
overlap. If they do, the earlier
programme will
DLY To record every day (except
Sunday) at the same time.
PR-01
or
to confirm.
or 4
1 is
always
be
programmed
given priority.
to start at 16:00 and end at
17:00.
2 is programmed to start at 16:30 and end at
17:30.
(In this case, Programme 1 will be recorded in its entirety, but
only the last 30 minutes of Programme 2 will be recorded.)
Programme
SP
SP
SP
SUMOTUWETHFRSA
29
If Timer record events
Overlap...
Change (Deleting)
Do not
overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later
recording times as shown in the diagram.
a later date you wish to delete or change any of
settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press D
the
Example:
Programme
change.
or
1 will be recorded in its
Programme
entirety,
but
only
2 will be recorded.
E to select the event that you wish to delete
Press F to delete the event...or
Press OK to
PROGRAMME 1
17:00
17:30
16:30
PROGRAMME 2
(This portion
If two
programmed
will not be
timer
recorded.)
recordings overlap
at
00:00 a.m., programme 2 will not be recorded.
30
midnight
change,
then press F
or
G to
or
or
select;
Station, Date, Start and End times and LP.
Press D
16:00
Programme
If at
tions of the
the last 30 minutes of
the Timer
E to enter the correct information.
Playing
DVD
a
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
Unless stated
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the playback side down.
3.
Press OPEN/CLOSE to close the
4.
starts
If
automatically.
playback
some
cases, the disc
menu
tray. Playback
does not start,
might
Moving
to another TITLE
When
disc has
a
stopped
then the
b / B to
move
You
more
than
one
title, you
can move
to
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
playback is
appropriate number (0-9) or use
to another title.
play any title by inputting
playback is stopped.
can
appear
instead:
Use the bBvVbuttons to select the
use
another title. Press DISPLAY while
press PLAY.
In
otherwise, all operations described
the remote control. Some features may also be available on the Setup menu.
its number while
Moving
to another CHAPTER/TRACK
When
title
a
disc has
er
on a
more
disc has
than
chapter/track
as
one
more
than
track, you
one
chapter
can move
or a
to anoth-
follows:
or > briefly during playback to select
chapter/track or to return to the beginning
of the current chapter/track.
Press . twice briefly to step back to the
previous chapter/track.
?T o go directly to any chapter during DVD playback,
?
Press .
the next
Use the 1 2
3
4
buttons to select
an
option
you
want, then press ENTER to view the option.
?
press DISPLAY and press v / V to select the
icon. Then, input the chapter/track
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating procedures may differ. Follow the instructions on the
each menu screen. You also may set PBC to Off
(See
"PBC"
on
page
25).
chapter/track
numberoruseb/B.
Search
1.
?
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 26.)
The
If
2.
player.
(two).
your
o
watch
> for about two seconds
a
The
region
code for this
DVD
during
timer
player
MX100
With
now
go into SEARCH mode.
or
>
repeatedly
.
to select
(forward).
CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
is 2
to switch to DVD
will
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
recording standby
mode, press POWER and DVD
player
Press and hold .
the
DVDs may have a region code. Your player does
not play discs that have a region code different from
?T
or
during playback.
Notes:
?
Press and hold .
3.
a
Video
To exit SEARCH
mode, press PLAY.
mode.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
a
different audio channel
31
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
2.
on
The DVD
player
Press .
2.
The
T
during
or
1/16, t 1/8, t 1/4
1/16, T 1/8, T 1/4
or
t 1/2
or
T 1/2
mode, press PLAY.
playback
reverse
is not
with
Track
?
All
?
Off
Repeat
possible
Press RANDOM
during playback or in stop mode.
automatically begins random playback
the TV
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
:
does not
:
play repeatedly.
-
Repeat Track/Group/Off
the current track.
repeats
Group: repeats the
Off
current Group.
play repeatedly.
does not
:
On
a
Video CD with
the
"PBC"
on
-
play repeatedly.
Track:
on
Random
and RANDOM appears
repeats the
does not
:
?
?
?
The unit
current title.
Off
?
Video CDs and DivX Discs.
1.
Title:
?
?
?
in
?
Notes:
Note:
Slow motion
the current
DVD Audio Discs
required speed:
(backward), or
(forward).
Repeat Chapter/Title/Off
chapter.
Chapter: repeats
pause.
> to select the
To exit Slow Motion
3.
go into PAUSE mode.
will enter SLOW mode.
player
Use the .
t
>
or
now
-
?
Video CDs
(X) during playback.
will
title/chapter/all/track on a disc.
during playback to select a desired
DVD Video Discs
mode, press PLAY.
Press PAUSE/STEP
a
repeat mode.
Slow Motion
1.
play
can
Press REPEAT
screen.
setup
on
menu
page
PBC, you
to
use
the
must set PBC to Off
repeat function (See
25).
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
(Track)
3D Surround
To
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
Press RANDOM
2.
again
to normal.
audio
Tip:
.
By pressing
or
>
during Random playback,
(track) and resumes
the unit selects another title
Random
playback.
a
setup
menu
to
use
2.
3.
Press DISPLAY
Use 3
or
PBC, You
must set PBC to Off
the random function
(See
on
"PBC"
on
the
4 to select the sound
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
To turn off the 3D Surround
effect, select "Normal".
page
To start
A-B
repeat
a
1.
sequence.
Press A-B at your chosen
appears briefly on the TV
starting point.
"
A
*
"
2.
screen.
again at your chosen
briefly on the TV
repeat sequence begins.
on
the disc:
The time search
during playback.
elapsed playing time.
Press v / V to select the time clock icon and
"-:--:--" appears.
Press A-B
end
screen
again
at any chosen time
box shows the
"A B" appears
Press A-B
playing
Press DISPLAY
point.
3.
and the
Input
the
required
start time in
hours, minutes, and
seconds from left to
right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
to cancel.
4.
Press ENTER to confirm.
selected time.
32
during playback.
Time Search
Repeat
1.
2.
3.
Video CD with
25).
To
1.
The sound
Note:
On
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
the five+
Playback
starts from the
Zoom
Use
to
zoom
the video
enlarge
Press ZOOM
1.
image.
during playback
still
or
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
→
1600% size
screen
→
fit mode
→
the
can
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
Input
the way the
when
image appears on
you're playing a DVD movie.
Press 3/4 to select between
Use the bBvVbuttons to
zoomed
To
4.
Press TITLE. If the current title has
1.
Normal, Enhanced,
move
through
2.
the
appears
menu
may appear.
repeatedly
normal
or
playback,
press ZOOM
3.
CLEAR button.
Notes:
?
?
To enter
a
Camera
Marker
desired
point
screen
on
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
To Recall
or
1.
During
disc
search
menu
Within 10
Clear
Marked Scene
a
seconds, press
b / B to select
scene.
playback
or
a
marker
clear.
starts from the
Or, press CLEAR and the marker
displayed.
recorded at different
scenes
the Audio
can play any marker by
the marker search menu.
inputting
Press AUDIO
different audio
Language
repeatedly during playback
language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
main and
a
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
number is erased from the list.
on
is
menu
to exit.
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Changing
press SEARCH. The marker
appears on the screen.
Press ENTER and
marked
again
playback,
number that you want to recall
You
and
Angle
If the disc contains
markers.
4.
angles,
as camera
options,
camera
playback from up to nine memorized
To enter a marker, press MARKER at the
start
can
the TV
3.
menu, the
Press TITLE to exit.
Press DISC MENU
Marker Search
2.
subtitle
Press DISC MENU and the disc
disc, VR disc and movie file.
points.
offers features such
menu
a
Otherwise, the disc
screen.
Disc Menu
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
You
The
on
the
menu
spoken language and
chapters for the title.
picture.
resume
corresponding number or use the b
highlight your selection. Then press
ENTER.
and Maximum.
3.
the
B v V buttons to
Title Menu
change
screen
Checking
100% size
Screen fit mode:
You
DVD Features
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
2.
Special
(Main
+
its number
Subtitles
Press S-TITLE
repeatedly during playback
languages.
to
see
the
different subtitle
Note:
?
The subtitle file of the DivX file is
smi,
?
displayed only
srt and sub.
If there is
no
information
not read in the DivX
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
33
DVD Audio Discs
DVD Audio is
building on the success of DVD to provide high quality, uncompressed,
multi-channel audio for a new experience in audio
quality. A DVD Audio disc can be identified by the
DVD audio logo on the disc jacket or on the disc itself.
DVD Audio
a new
disc format
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
can
music, either Advanced Resolution multi-
channel sound
quality that is closer to the artist's
recording or for longer recordings. Many DVD
Audio discs contain
on-screen
text, such
as
groups. Your player enables you to quickly access different groups during playback via the on-screen dis-
play.
1.
Press DISPLAY
2.
Press 3/4 to select
Press 1/2
3.
mas-
tent that
maximum sound
must
quality
use
the numbered buttons
(0-9)
to select
can
only
be accessed
by entering
a
con-
pass-
cover or on a
isn't dictated
by
web
site).
This
password
your DVD/CD receiver
---
it is
control
a
func-
Since the
authoring of DVD Audio Discs varies, some
display choices might not be availthe disc you're playing.
on-screen
and surround effect
5.1 channel
output (5.1CH AUDIO OUT jacks
icon.
word. If the lock icon appears on the TV screen, enter
the password (sometimes you'll find it on the disc's
able for
Audio, you
stop mode.
tion of the disc.
Note:
enjoy
in
Sometimes the author of the disc creates hidden
of the
of DVD
Group
on
group number.
jacket
artist
biographies, playlists, or lyrics. Some DVD Audio
discs contain photo galleries or video clips.
To
or
during playback
Note:
DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
ter
Some DVD Audio discs divide content into different
a
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
typical
used for
to another GROUP
Moving
on
analog
audio
the DVD/CD
receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though
you're playing a DVD Audio disc.
Viewing
another PAGE
Since DVD Audio discs
can
hold
a
lot of content, there
on the disc.
are
various ways to
see
what's available
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
of the
able for
34
authoring of DVD Audio Discs varies, some
display choices might not be availthe disc you're playing.
on-screen
Playing
Audio CD
an
or
MP3/WMA
Disc
MP3 / WMA disc
limited
?
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
as
compatibility
with this
player
is
follows:
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
screen. Press v / V to select a track then press
TV
PLAY
or
ENTER and
?
?
starts.
playback
AUDIO CD
1/12
0:52:07
List
Program
creates
Track1
an
Track2
?
Track3
Track4
File
names
and must
Track5
Track6
?
Track7
Clear All
Track8
PROGRAM
They
ISO 9660 file
system.
should have
a
incorporate
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
see
folder, and press ENTER
a
the folder contents.
Press v / V to select
ENTER.
Playback
track then press PLAY
a
or
starts.
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
Operation
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
Info
PROGRAM
Edit
should
Tip:
?
If you
is
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
in order to download MP3 / WMA files
always
be
sought
from the
copyright
owner.
are
in
a
file list
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
and
highlight
press ENTER.
?
Press DISC MENU to
?
On
?
move
to the next page.
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
on
When
a
playing
titles, you
top of the
file
can see
menu
containing
is
highlighted.
information such
the information
by pressing
as
track
DISPLAY.
35
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
screen.
Press PAUSE/STEP
1.
press
2.
during playback.
To return to
2.
Press RANDOM during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
playback, press PLAY,
PAUSE/STEP again.
ENTER
To return to normal
repeatedly
or
playback, press RANDOM
disappears from the
until RANDOM
menu screen.
Tip:
Moving
>
or
the next track
briefly during playback to go to
beginning of the
to return to the
or
current track.
Press . twice
2.
previous
In
3.
>
during
another track and
Press .
1.
By pressing
to another Track
case
briefly
step back
to the
of audio
CD,
directly to any track,
using the numbered but-
to go
playback, the
playback.
unit selects
random
A-B
1.
To
2.
Press A-B
track.
enter the track number
tons
to
Repeat
random
resumes
repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
again at your chosen end point. The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Repeat
(0-9).
repeatedly.
Track/All/Off
Repeat
You
1.
can
play
a
3.
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
repeat
menu screen.
icon appears.
2.
Press REPEAT to select
?
?
?
a
desired
repeat mode.
To
Track:
repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
does not
repeat playback
once
Track
a
3D surround effect that simulates
speakers (instead
speakers normally required for
multi-channel audio from a home theater system).
of the five+
play repeatedly.
during Repeat
produce
multi-channel audio from two stereo
Note:
If you press >
3D Surround
playback,
the
1.
cancels.
2.
Press AUDIO
on
To return to normal
playback, press AUDIO
disappears from
repeatedly
Search
1.
Press and hold .
or
> for about two seconds
The
2.
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
to select
the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
screen.
3.
36
To exit SEARCH
mode, press PLAY.
on
the
menu
the
until "3D SUR."
menu screen.
during playback.
during playback.
"3D SUR." appears
menu screen.
the
Repeat Programmed
Programmed Playback
1.
can
1.
Insert
a
disc.
Press REPEAT to select
?
Track:
?
All:
?
Off(No display):
MUSIC
or
menu
If you press >
repeat playback cancels.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
Erasing
Note:
Press PROGRAM
then the
again,
Program
to exit the
mark will
E
1.
Edit mode.
AUDIO CD
2.
MUSIC
1/12
repeat
desired
repeat mode.
play repeatedly.
List
the
List
Program
Press PROGRAM in the
Program
Press B to
playback,
stop mode
to
Edit mode.
move
to the
"Program"
list.
E
Program
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
3.
2-Music2
Track5
:
Track
during Repeat
1/12
0:00:00
E
Program
once
Track from
a
Video CD
enter
Track1
Use v/V to select the track that you wish to
"Program" list.
erase
from the
4-Music4
Track6
5-Music5
Track7
4.
6-Music6
Clear All
Track8
Clear All
7-Music7
DISPLAY
Audio CD Menu
PROGRAM Edit
Info
MP3/WMA Menu
Video CD: Press PROGRAM while
The program
PROGRAM to exit the
stopped.
playback
1.
is
2.
Note:
On
a
Video CD with
setup
menu
"PBC"
on
to
PBC, you
the
use
must set PBC to Off
erase
Operation
additional tracks
Complete Program
as
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
complete Program
All", then press ENTER.
for the disc will be erased.
on
Note:
programmed playback
The programs
removed.
25).
page
to
Use 3/4 to select "Clear
The
the
the
Follow
List"
menu.
Repeat
the list.
Erasing
appears. Press
menu
Press CLEAR.
on
PROGRAM Edit
(See
disc. The
Note:
appears.
E
List
a
does not
The
0:52:07
a
repeats the current track
repeats all the tracks on programmed list.
Press PROGRAM.
disappear
playing
MP3/WMA Discs:
or
AUDIO CD
2.
2.
contain 30 tracks.
Audio CD
Press REPEAT when
icon appears.
The program function enables you to store your
favorite tracks from any disc in the player memory. A
program
Tracks
are
also cleared when the disc is
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
list have
"Program"
6.
To
resume
playback,
normal
select
a
played
once.
playback
from
track of CD
programmed
(or MP3/WMA) list
and then press PLAY.
37
Viewing
JPEG Disc
a
Moving
Using this DVD Player you can view Kodak PICTURE
CDs and discs with JPEG files.
1.
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
JPEG
to another File
Press .
or
>
during viewing a picture
to the previous file.
once
advance to the next file
to
or
JPEG
Zoom
screen.
Use
(see
PHOTO
List
the
to
enlarge
page)
zoom
33
photo image.
Preview
To rotate
JPEG Folder 1
JPEG Folder 2
picture
>>>
JPEG Folder 3
Press v / V
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
JPEG Folder 7
during showing
clockwise
or
a
to rotate the
picture
counter clockwise.
JPEG Folder 8
To listen to MP3/WMA music
watching picture
JPEG
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Slide Show
1.
move
or
PLAY.
to
move
files while
on
listening
the
same
containing
to MP3/WMA
disc.
the two
types of file in
player.
2.
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
Playback
STOP is
to the next page.
display
starts. The
a
PHOTO
photo
menu.
file.
icon then press ENTER.
will continue until
playback
pressed.
Tip:
JPEG
Use vVbBto
display
Insert the disc
the
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Press DISC MENU to
can
music files recorded
and press ENTER.
highlight
3.
on
You
To listen to
highlight
the
(Slide Show)
then
press ENTER.
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Tip:
?
There
are
(Normal)
?
three Slide
and
Speed options
(Slow).
(Fast),
: >>>
>>
On
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
?
>
Press
on
RETURN,
top of the
menu
is
JPEG disc
limited
?
compatibility
with this
player
is
follows:
as
Depending
upon the size and number of JPEG
a long time for the DVD player
files, it could take
highlighted.
to read the disc's contents. If you don't
screen
information of file is hidden.
display
after several
minutes,
see an on-
some
of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
---
Still Picture
1.
2048
Press PAUSE/STEP
The
2.
JPEG
player
will
now
slide show.
?
go into PAUSE mode.
To return to the slide
PAUSE/STEP
during
again.
show, press PLAY
or
pixels
and burn another disc.
The total number of files and folders
press
?
?
the disc
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
?
If the files have
rename
?
File
them
names
the files
are
Windows
copying
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
38
on
should be less than 650.
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
JPEG
player.
image
Even
though
files in
5.1
Speaker Setup
This
to
chapter includes important reference information
help you set your DVD/VCR Combi receiver.
If you connected
following settings
for the built-in 5.1 channel
how far the sound has to travel to reach your set lisThis allows the sound from each speaker
Press b / B to
1.
Press SETUP. The
2.
Use v / V to select the AUDIO
3.
setup
menu
speaker.
[0.3(1)m(ft)
appears.
option
Use v / V to select the
press B to
move
to the third level. "Select" is
then
high-
6.0(20)m(ft)]
Press b / B to test the
Front Left
Speaker Setup
menu
→
appears.
signals
of each
the volume to match the volume of test
rized in the
Press ENTER and 5.1
time.
Test
Speaker Setup option
lighted.
4.
-
adjust
same
the Distance of the selected
then press
to the second level.
move
to your DVD/VCR Combi
tening point.
to reach the listener at the
surround decoder.
B to
speakers
receiver, setting the Distance lets the speakers know
Speaker Setup
Make the
Distance
speaker. Adjust
signals memo-
system.
(L)
Rear Left
→
(R)
Center
→
Front Right (R)
SubWoofer
Right (L)
→
Rear
→
AUDIO
Speaker
Size
Volume
Distance
Test
Operation
Front L
Small
dB
0
m(ft)
0.6(2)
Off
Select
Move
Return
5.
Use b / B to select the desired
6.
Adjust options using
7.
Press RETURN to return to the
Speaker
Select
Enter
speaker.
v / V / b / B buttons.
menu screen.
selection
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
are
fixed, you
cannot
the
Volume
Press b / B to
speaker. (-6dB
adjust the output
6dB)
level of the selected
~
39
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
Maintenance and Service
using
using
the DVD-Video format that have been finalized
a
?
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
Insert
a
menu
appears
disc and close the
on
the TV
tray. The TITLE LIST
When
shipping
Please
save
Do not
ENTER and
playback
Press TITLE to
move
track then press PLAY
or
starts.
to the list
menu.
use
near
packing
volatile
liquids
such
as
insecticide
the unit.
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
surfaces
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
player.
?
carton and
Do not leave rubber
?
a
original shipping
the exterior surfaces clean
spray
Press v / V to select
the
the unit
factory.
Keeping
?
?
before
the Unit
Handling
at the
3.
chapter
service technician.
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
screen.
DVD-VR
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of
discs.
Do not
or
use
thinner,
strong solvents such
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
a
copy protection system (with scramble system)
the recording of 'copy once' broadcast
only allowing
programs. CPRM stands for Content Protection for
Recordable Media.
This
play is CPRM compatible, which means that you can
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
40
If the
or
use.
contact your nearest authorized
Playing
a
DivX Movie Disc
DivX disc
as
this DVD
Using
Player
you
can
play
DivX disc.
compatibility
with this
player
is limited
follows:
?A vailable resolution size of the DivX file is under
Insert
1.
a
appears
disc and close the
on
the TV
tray. The MOVIE
menu
720x576
screen.
?
MOVIE
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
Movie Folder 3
If there is
code to express in the DivX
as
mark on the
impossible
"
file, it may be displayed
Movie Folder 4
Movie Folder 5
"
_
display.
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
If the number of the screen frame is
over
30
per 1 second, this unit may not operate
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
2.
v / V buttons
on
the remote to
normally.
?
and
highlight
?
If you want to view a particular file, press
v / V to highlight a file and press ENTER
or
PLAY.
Tip:
Press DISC MENU to
?
On
a
CD with
switch
move
*
GMC?
highlighted.
encoders, like DivX
There
are
called
1-point, 2-point,
or
or
Operation
Xvid, have this option.
different levels of GMC
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you
can
MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
is
audio is
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
MPEG4
?
or
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
Press STOP to exit.
4.
interleaved, either video
outputted.
press ENTER.
3.
If the video and audio structure of recorded
file is not
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 8 48 kHz (MP3),
-
within 32
?
48kHz
(WMA)
320kbps (MP3),
192kbps (WMA)
-
Bit rate: within 8
32
-
-
41
Additional Features-VCR
On Screen
You may
part
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will
appear on the TV screen. If a recording is taking
place
these On Screen
onto the
Displays
This feature informs you that there is a problem with
your DVD/VCR Combi receiver. These error mes-
sages will appear
1.
will not be recorded
the TV
screen.
Press i.
Press 1
tape.
on
or 2
to select Dr.
Press OK.
Press CLK/CNT to
1.
Press CLK/CNT
display.
repeatedly
to
VIDEO DOCTOR
the
cycle through
HEAD STATUS
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
PSET
R
REC
Pr-12
ACMS
TIME
DATE
After 3 seconds the
Displays
will clear
majority of the
leaving only the
counter and the amount of
Press CLK/CNT
the TV
again
to
clock
tape left
remove
ON
OFF
On Screen
all
on
or
the
tape
screen.
displays
2.
SYSTEM
NIC
fOSD
2.
(Self-Diagnosis)
16:9
4:3
OK
OPR
Press
3 or 4
to check
a
problem.
HEAD STATUS
from
O
screen.
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
Tape Counter Memory Stop
The
O
Insert
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter
display window instead of
on
1.
the
can
be
Shows the number of timer
or
recording.
will display the
tape counter
hours, minutes and seconds.
Press STOP when
playback
or
3.
actual
recording
play
time
is
complete.
Press BACKWARD.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
42
PR-01 26 10:00~11:00SP
Shows the current status of timer
start
The
The
recording.
NEXT TIMER PROGRAMME
O
Press CLEAR to set the counter to 0:00:00.
2.
tape with its protection tab in place
NO. OF TIMER PROGRAMME
Press CLK/CNT.
in
a
O2
tape.
Press PLAY
NOT RECORDABLE:
Press i
recording.
Hi-Fi Stereo Sound
Wide Screen
System
Your DVD/VCR Combi receiver will record and
back Hi-Fi stereo sound. In addition it has
NICAM
digital
to record and
a
play-
stereo
stereo sound decoder. This allows you
playback
the sound in several different
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
Your DVD/VCR Combi receiver
back wide
record
1.
system, video disc
or
a
screen
wide
the correct
cast
1.
by
can
16:9
record and
play
aspect ratio programmes (16:9). To
screen
format programme
type of wide
signal
screen
successfully
must be broad-
the TV station.
Switch
your VCR.
on
Press i.
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio
Compatibility
Press F
or
G to select 16:9/4:3.
Press OK.
another Hi-Fi VCR.
Your DVD/VCR Combi receiver's NICAM
digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
bilingual
and
mono
sound received
played
on
or
the TV
sound. The
particular type of
briefly discouple of seconds:
screen
for
a
STEREO NICAM
Sound is automatically recorded on the Hi-Fi
stereo and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
ON
OFF
2.
mono
2.
track of the video
Press AUDIO
SYSTEM
REC
Dr.
PSET
R
ON
OFF
OPR
Press D
Pr-12
Dr.
ACMS
fOSD
NIC
or
E
repeatedly
OPR
to select:
AUTO, 4:3
or
back Wide-Screen
programmes as Wide-Screen and Normal
programmes as normal.
4:3
Only for playing back and recording Normal format
Automatically plays
(left)
track of the video
recordings (4:3).
the Hi-Fi tracks and the
16:9:
tape without any separation.
repeatedly
TIME
DATE
AUTO:
MONO
on
ACMS
16:9.
tape.
The sound is recorded
Pr-12
PSET
R
fOSD
the Hi-Fi
channel
VCR
VCR
REC
that recorded will be
Only
for
format
until the desired audio
playing back and recording
recordings (16:9).
Wide-Screen
mode appears.
3.
The choice is
STEREO, LEFT, RIGHT and
playback the primary language is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
MONO. In BIL NICAM
STEREO.
The primary language willbe output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
VCR
Pr-12
REC
PSET
R
ACMS
Dr.
fOSD
ON
OFF
3.
Press i to
To
remove
OPR
the
Wide-Screen
menus
from the TV
screen.
you must
connect your DVD/VCR Combi receiver to the TV
using a RCA-SCART cable.
enjoy
playback
43
Additional Features
Last Scene
Memory
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even
if you
off the
remove
the disc from the
If you load
the scene is
player.
memorized,
a
player
or
disc that has the
switch
scene
recalled.
automatically
Note:
This
player
does not memorize the
switch off the
player
before
scene
commencing
of
to
a
disc if you
the disc.
play
Screen Saver
The
appears when you leave the DVD
mode for about five minutes.
screen saver
in
player
Stop
Video Mode
Setting
With certain
discs, the playback picture may be
flickering
Dot Crawl is shown
That
or
means
Vertical
straight
on
interpolation
or
lines.
De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
change
the video
mode, press and hold
DISPLAY about 3 seconds
new
during
disc
playback.
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
The
video mode number selected is
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
MODE1
al
or
:
video
MODE2
:
Description
The
source
material)
of each Video Mode
material of the DVD video
(film
materi-
is determined from disc information.
Suitable for
playing film based content or video
by the progressive scan method.
based material recorded
MODE3
:
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
menu.
44
setting only
works when the
Scan mode is set to "On"
on
the
setup
from DVD To VCR
Copying
Recording
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
sure
setup
to set
Scan" to "Off"
"Progressive
on
the
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another DVD/VCR Combi receiver
protected,
are
attempting
to copy is copy
you may not be able to copy the disc.
3.
camcorder.
Note:
In the
one
2.
or a
menu.
If the DVD you
1.
from another video
following description,
recording and
used for
DVD/VCR Combi receiver B. The other
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
be used for
Insert VHS Tape
Insert a blank VHS
1.
Copy
videotape
the DVD to VHS
into the VCR deck.
Tape
will
as
DVD/VCR Combi receiver A should be connected
or
on
the AV sockets
on
the
rear
panel of your
panel of your
the front
unit.
appears, you may need
button manually to begin
menu
Play
and will be referred to
to the SCART socket
unit
The DVD will go into Play mode and the
DVD/VCR Combi receiver will go into Record
mode.
If the DVD disc
playback
as
appliance
DVD/VCR Combi receiver A.
Press the REC/ITR button.
to press the
this video recorder will be
will be referred to
2.
Insert the recorded
receiver A and
a
tape into DVD/CD/VCR
tape into DVD/VCR Combi
blank
receiver B.
3.
Press AV until the socket you wish to record from
displayed. (DVD/VCR Combi receiver B)
is
copying.
AV 1 for
If you press the REC/ITR button, be sure this
DVD/VCR Combi receiver in DVD mode.
the Copy Process
When the DVD is finished
playing,
press STOP to
4.
the
rear
stop the Copy process manually
when the DVD movie ends, or the unit may
and
over
again.
of your unit.
&
recording from VIDEO IN
Right) sockets on the front
and AUDIO IN
of your unit.
To start
recording, press the REC/ITR on
DVD/VCR Combi receiver B and PLAY on
DVD/VCR Combi receiver A.
You must
over
on
(Left
end the copy.
and record
rear
AV 3 for
Stop
replay
the
from EURO AV1 SCART socket
of your unit.
AV 2 for recording from EURO AV2 SCART socket
Note:
4.
recording
on
5.
When you want to finish copying, press the STOP
on both DVD/VCR Combi receiver.
45
Presetting
You
preset
can
make
tuning,
the Radio Stations
50 stations for FM and AM. Before
sure
Preset radio stations in the DVD/VCR Combi receiver
that you have turned down the vol-
Press FM/AM
the remote control
on
front
on
memory first
(see "Presetting
radio stations"
on
the
left).
ume.
1.
to the Radio
Listening
panel until the frequency
the display and TV screen.
or on
the
1.
band appears
Press FM/AM
the remote control
on
front
on
panel until the frequency
the display and TV screen.
or on
the
band appears
The last received station is tuned in.
2.
Press 3/4
on
the remote control
repeatedly
to
select the preset station you want.
Each time you press the button, the DVD/VCR Combi
RADIO
AM
3.
OK, CLEAR
,
2.
receiver tunes in
01
522kHZ
Press 3/4
on
one
preset station
at
a
time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on
the remote control repeatedly.
-
the remote control to select your
desired radio channel.
To Clear the Stored Radio
Stations
1.
RADIO
FM
Press FM/AM
108. 00MHZ
on
Press FM/AM
front
4.
panel
on
the remote control
(3/4)
hold down 1 and 2
on
2
or on
the
band appears
or on
the
to select the desired band.
Hold down PRESET
or
panel until the frequency
the display and TV screen.
OK, CLEAR
,
3.
the remote control
on
front
06
seconds, and
a
on
the front
panel
or
RADIO
the remote control for 1
FM
06
108. 00MHZ
station is searched for
,
OK, CLEAR
automatically.
2.
Press 3/4
on
the remote control to select your
desired station.
RADIO
FM
06
87. 50MHZ
,
OK, CLEAR
RADIO
AM
6.
Press MEMORY
on
the remote control.
,
3.
10
522kHZ
OK, CLEAR
Press CLEAR the remote control to clear the
stored radio station.
7.
Repeat steps
2 to 5 to store other stations.
RADIO
FM
10
98. 00MHZ
,
OK, CLEAR
Note
While record
or
record pause
function may not be
46
operated.
mode, the CLEAR
Tuning
1.
into
Station
a
Press FM/AM
on
Manually
the remote control
front
on
2.
panel until the frequency
the display and TV screen.
Press FM/AM
front
3.
panel
on
the
or on
band appears
the remote control
the
or on
to select the desired band.
Press PRESET
(3/4)
on
the front
panel
or
press 1 and 2 on the remote control to tune
in the desired station.
Tuning
into
a
Station
Hold down PRESET
(3/4)
on
Automatically
the front
down 1 and 2
on
seconds, and
station is searched for
a
panel
the remote control for 1
or
or
hold
2
automatically.
Note
The search may not
weak signal.
stop
at
a
station with
a
very
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
answer
the
appear in
telephone,
the display.
example,
to
MUTING and MUTE indicator
47
Language Codes
Use this list to
Disc
your desired
language
for the
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
48
input
Audio, Disc Subtitle, Disc Menu.
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD/VCR Combi
No disc is inserted.
Insert
No
disc
the power cord into the wall outlet
Plug
securely.
tape is inserted.
picture.
disc or tape. (Check that the
tape indicator in the display
a
or
window is
receiver does not work.
No
service.
The TV is not set to receive DVD/VCR
Select the
Combi receiver
on
signal output.
the TV
lit.)
appropriate video input
the picture from the
mode
so
DVD/VCR Combi receiver appears
the TV screen.
TV/VCR mode for DVD/VCR Combi
receiver is set to TV.
on
Press the TV/VCR button on the remote
control repeatedly to choose VCR mode.
TV indicator
disappears
in the
display
window.
The video cable is not connected
Connect the video cable
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
cable is not set to receive DVD/VCR
Select the correct input mode on the audio
receiver so you can listen to the sound from
Combi receiver
the DVD/VCR Combi receiver.
connected with the audio
equipment
signal output.
The audio cables
are
not connected
on
the TV.
Connect the audio cables
securely.
securely.
The power of the equipment connected
with the audio cables is turned off.
The
digital audio output
position.
is set to the
wrong
The
is
playback picture
poor.
The disc is
Tape
heads
Tape
is
a
receiver does not start
playback.
digital audio output to the
position, then turn on the
DVD/VCR Combi receiver again by
pressing POWER.
on
Use (v/V) for manual tracking
adjustment while tape is playing.
Insert
No
disc
tape is inserted.
disc or tape. (Check that the
tape indicator in the display
a
or
window is
unplayable
connected with
Set the
No disc is inserted.
An
equipment
Clean video heads.
recorded
or was
another VCR.
The DVD/VCR Combi
the
Clean the disc.
dirty.
are
on
the audio cables.
correct
dirty.
rental
Turn
Insert
disc is inserted.
a
lit.)
playable
disc.
(Check
the disc
type, color system, and Regional code.)
The disc is
placed upside
The disc is not
placed
Place the disc with the
down.
within the
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
rating
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from
This should mean that additional head cleaning should not
However dirt accumulating on the head after a long period
blurred or broken up. High quality video cassette tapes will
or
playback
the disc
side down.
tray correctly
guide.
The disc is
Rating
on
Rating
function
or
change
the
level.
your VCR the video head is automatically cleaned.
be necessary.
of time can cause the playback picture to become
not normally deposit dirt onto the video head, but old
damaged tapes might.
49
Cause
Symptom
This remote control
The remote control is not
the same
buttons for VCR and
remote
uses
sensor
Correction
pointed
at the
Point the remote control at the remote
of the DVD/VCR Combi receiver.
The remote control is too far from the
DVD functions
There is
an
obstacle in the
path
the remote control within 23 ft
Operate
(7 m).
DVD/VCR Combi receiver.
(ex. PLAY).
of the DVD/VCR Combi receiver.
sensor
of the remote
Remove the obstacle.
control and the DVD/VCR Combi receiver.
The batteries in the remote control
the batteries with
Replace
are
new ones.
exhausted.
This remote control
The
tape does
not
the
uses
When
same
using
a
VCR, first press the VCR
a DVD, first press
buttons for VCR and DVD functions
button. When
(ex. PLAY).
the CD/DVD button.
using
The DVD/VCR Combi receiver is in the
Press PAUSE/STEP
during recording.
RECORD PAUSE MODE.
recording.
The
The
or
tape will
run
not rewind
fast-forward.
The
tape is already fully rewound
playback picture
resume
or
fast-
Check the
the RF cable for
con-
Set the TV to the Video channel
tape.
If
you're using only
nection.
(see
Noise appears
visual search.
This is normal.
Turn camcorder
during
p.
17).
on
and
operate
properly.
Noise appears during
normal playback.
The automatic
Breaks
There is
The automatic
noticeable
in Hi-Fi soundtrack.
Recording
to
forwarded.
does not appear while
the tape is running.
are
(X)
no
tracking
tracking
cannot be
The
engaged.
engaged.
Try
manual
tracking (see
p.
27).
tape loaded
Try
manual
tracking (see
p.
27).
mode is
tape loaded,
has had its record
started.
mode is
safety
or
the
tab removed.
(another VCR, camcorder)
properly connected.
source
not been
has
Insert
a
cover
the hole where the tab
tape,
or
using
adhesive
tape,
was
removed.
Tape-to-tape editing
not possible.
Timer
recording
is
won't
The clock/or the timer have been set
Confirm that the camcorder is
incorrectly.
connected.
The timer is not
work.
Re-perform
tings.
engaged.
properly
the clock and/or timer set-
Press POWER and confirm that the
The loaded
timer indicator is
tape has had its record safety
displayed
on
tab removed.
DVD/VCR Combi receiver's
Insert
a
Audio mode is not set
insert
a
properly.
the
Display.
pate with adhesive tape, or
tape with the record safety tab
intact.
Select "STEREO"
No Hi-Fi sound.
ing
AUDIO
on
by repeatedly pressthe remote control.
Moisture Condensation
Moisture condensation
?W
a
?
can occur:
hen the DVD/VCR Combi receiver is moved from
cold
Under
place
to
a warm
extremely
In locations where moisture condensation may
?
Keep the
DVD/VCR Combi receiver
plugged into an AC
help prevent conden-
power outlet with POWER On. This will
sation.
place.
humid conditions.
?
When condensation has
occurred, wait
for the DVD/VCR Combi receiver to
it.
50
occur:
dry
a
few hours
before
using
Specification
General
Power
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Power
Refer to main label
Refer to main label
RF Modulator
430X81X360mm(wxhxd)
5.8 kg (17.6 lbs)
5˚C to 40˚C (41˚F to 104˚F)
24-hour display type
UHF 22 68 (Adjustable)
Operating humidity
5%to90%
Timer
-
DVD Section
Laser
Semiconductor
Signal system
Frequency response
PAL/NTSC
laser, wavelength
650
nm
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto20kHz
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 65 dB
Harmonic distortion
Less than 1.0%
Dynamic
More than 60 dB
range
More than 60 dB
(analog
out connectors
only)
(DVD)
(CD)
Outputs
S-VIDEO OUT
(Y)
(C)
1.0 V
(p-p), 75 ohms, negative
(p-p) 75 ohms
0.3 V
sync, Mini DIN
4-pin
x
1
VCR Section
Head
6 heads helical
system
system
Television
Recording
scan
PAL/SECAM colour
format
azimuth
system
system
PAL/MESECAM
RF OUT
K
Tape speed
(LP)
(Playback only);
(SP), 16.67 mm/s (LP),
11.12 mm/s (EP)
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
PAL/MESECAM;
23.39 mm/s
NTSC
Maximum
recording
time
Rewind time
Input
level
Output level
Signal-to-noise
ratio
More than 42 dB
range
16.69 mm/s
VIDEO: More than 43 dB
AUDIO: More than 72 dB
Dynamic
(SP),
35.35 mm/s
(Hi-Fi)
(Mono)
AUDIO: More than 85 dB
Tuner Section
Tuning
FM: 87.5
range
AM: 522
Intermediate
frequency
-
-
108.0 MHz
1611 kHz
FM: 10.7 MHz
AM: 450 kHz
Amplifier Section
Stereo mode
Surround mode
60W+60W(8ohmat1kHz,THD10%)
Front: 60W + 60W (THD 10%)
Centre: 60W
Surround: 60W
+
Subwoofer: 120W
60W
(4
(8
ohm at 1
ohm at 30
kHz, THD 10%)
Hz, THD 10%)
51
Speakers
Satellite
(LHS-CX440T)
2
Type
Impedance
Frequency Response
150
Sound Pressure Level
Rated
Max
Net Dimensions
Input
Input
(W x
Net
Center
60W
Power
120W
Max
(1m)
115x198x125mm
D)
Weight
x
0.9
2
kg
Way
2
Speaker
8Ω
150
Sound Pressure Level
Net Dimensions
Speaker
20,000 Hz
-
Power
H
2
85 dB/W
speaker (LHS-CX440C)
Type
Impedance
Frequency Response
Rated
Way
8Ω
20,000 Hz
-
85 dB/W
Input Power
Input Power
(W x H x D)
Net Weight
(1m)
60W
120W
193x119x125mm
0.9 kg
Passive Subwoofer
(LHS-CX440W)
1
Type
Impedance
Frequency Response
40
Sound Pressure Level
Rated
Max
Net Dimensions
Input
Input
(W x
Net
Way
-
Speaker
1,500 Hz
83 dB/W
Power
120W
Power
240W
H
1
4Ω
(1m)
195x380x419mm
D)
Weight
x
6.6
kg
Accessories:
AM/FM antenna,
Design
and
Speaker
cable
specifications
are
Manufactured under license from
x
6, Scart RCA cable, Remote control
subject
Dolby
to
change
Laboratories.
52
Digital
Out"
are
trademarks of
Digital
1, Batteries (AAA)
x
2
without notice.
"Dolby",
"Pro
Logic"
Laboratories.
"DTS" and "DTS
x
Theater
Systems,
Inc.
and the double-D
symbol
are
trademarks of
Dolby
P/N: 3834RH0064P
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement