LG LH-CX643W Owner's manual

LG LH-CX643W Owner's manual
LH-CX643W_AA3ULLS
DVD/VCR COMBI RECEIVER
Combi Receiver
System
OWNER'S MANUAL
MODEL: LH-CX643
(Main Unit: LH-CX643W
Speakers: LHS-CX643T, LHS-CX643C,
LHS-CX643W)
CD-R/RW
PAL
Before
connecting up, operating
please
read this instruction
repairing
booklet carefully
or
this
and
product,
completely.
CAUTION
Warning: To reduce the risk of electric
shock, do not remove the cover or back
of this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
Warning: To reduce the risk of fire or
electric shock, do not expose this product to dripping or splashing water, rain,
or moisture. Do not place objects filled
with water such as vases, on the product.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
Date of
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Warning: To prevent direct exposure to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Never stare
laser beam.
Warning:
directly
into the
Caution: Do not install this product in a
confined space such as a book case or
similar unit.
This
product
is manufactured to
the radio interference
comply with
requirements of EEC
DIRECTIVE 89/336/EEC, 93/68/EEC and
73/23/EEC.
Notes
on
Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
2
______________________________
______________________________
Purchase_________________________
GeneralFeatures.......................30
Contents
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................8
MovingtoanotherTITLE................30
.30
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................30
.30
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.31
SlowMotion.........................31
Random............................31
.
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B.........................31
Repeat.............................31
3DSurround.........................31
TimeSearch.........................31
Zoom..............................32
MarkerSearch.......................32
RemoteControl.........................9
RearPanel............................10
SpecialDVDFeatures...................32
.11
CameraAngle.......................32
.32
ChangingtheAudioLanguage
InstallationandSetup
.
.
.
.
.
.
.
.
.
ConnectingtoaTV......................11
Accessory Audio/Video (A/V) Connections to
DVD/VCRCombireceiver.................12
RadioAerialConnections................12
SpeakerSystemConnection..............13
SpeakerPositioning.....................14
Mini Glossary for Audio Stream &
Surroundmode.........................15
SoundMode...........................15
.16-20
BeforeOperation-VCRpart.
.16
TuninginavideochannelonyourTV
.16
Using your receiver for the very first time
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SettingtheclockManually................17
Tosetthecoloursystem.................17
Howtousethemainmenu..............18
.18
Tuning in TV stations Automatically
.19
TuninginTVstationsManually
.20
ChangingtheorderofTVstations.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DeletingTVstations...................20
.21-25
BeforeOperation-DVDpart.
On-ScreenDisplay......................21
InitialSettings.......................22-25
GeneralOperation....................22
.
.
.
.
.
.
.
.
.
.
.
TitleMenu..........................32
DiscMenu..........................32
.
.
.
.
.
.
.
.
.
.
Subtitles............................32
DVDAudioDiscs.........................33
.34
PlayinganAudioCDorMP3/WMADisc
.35
AudioCDandMP3/WMADiscFeatures
Pause..............................35
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................35
RepeatTrack/All/Off...................35
Search.............................35
Random............................35
RepeatA-B.........................35
3DSurround.........................35
ProgrammedPlayback.....................36
.36
RepeatProgrammedTracks.
.36
ErasingaTrackfromProgramList
.36
Erasing the Complete Program List
ViewingaJPEGDisc......................37
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................37
StillPicture..........................37
MovingtoanotherFile.................37
Zoom..............................37
MenuLanguage....................22
Torotatepicture......................37
To listen to MP3/WMA music watching picture
.37
SpeakerSetup.........................38
.39
PlayingaDVDVRformatDisc.
DiscAudio/Subtitle/Menu.
.22
DISPLAY...........................23
PlayingaDivXMovieDisc................40
LANGUAGE.........................22
.
.
.
.
.
.
.
.
.
.
TVAspect.........................23
DisplayMode.......................23
ProgressiveScan...................23
AUDIO.............................23
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................39
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.41-42
.
OnScreenDisplay....................41
TapeCounterMemoryStop.............41
.41
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............42
.
.
.
.
.
.
.
.
.
.
5.1SpeakerSetup..................23
.23
DynamicRangeControl(DRC).
AdditionalFeatures.....................43
Vocal.............................23
OTHERS...........................24
PBC.............................24
ScreenSaver........................43
.
.
.
.
.
.
.
AutoPlay..........................24
DivX(R)VOD.......................24
LOCK(ParentalControl)................25
Rating............................25
.25
Password(SecurityCode).
CountryCode......................25
.
.
.
.
.
.
.
.
.
.
.
LastSceneMemory...................43
VideoModeSetting...................43
CopyingfromDVDtoVCR................44
.44
Recording from another video recorder
RadioOperation........................45
.45
PresettingtheRadioStations
ListeningtotheRadio..................45
.
.
Playingatape.......................26-30
.26
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.26
.27
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.28
.29
IfTimerrecordeventsOverlap
.29
Change (Deleting) the Timer Programme
.30-31
PlayingaDVDorVideoCD.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ToCleartheStoredRadioStations
.
.
.
.
.
.
.
.
.
.
.45
.46
TuningintoaStationManually
.46
Tuning into a Station Automatically
Mute...............................46
.
Operation....................26
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference....................47
LanguageCodes.......................47
CountryCodes.........................47
Troubleshooting.....................48-49
Specification........................50-51
.
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV
and indicates that the function
owner's manual is not
This manual
provides
information
on
the
operation
display during operation
explained in this
available on that specific DVD
video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
Notes
Discs
on
location.
Symbol
Handling
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
of
electric shock.
The exclamation
point alerts you to the presence of important operating and maintenance
/ servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
making
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
of the
following symbols
represented by the sym-
one
to the disc
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sunlight.
bol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
CD
Audio CDs
MP3
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
MP3 Discs
spray intended for older
WMA
WMA Discs
JPEG
JPEG Discs
Setting
DivX Discs
You must select one of your output
VCR) to view on the TV screen.
DivX
Do not
use
the
vinyl
records.
Source
Output
sources
(DVD
or
If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
?
until DVD indicator
source
on
the front
of DVD deck is viewed
panel lights
on
the TV
and
output
screen.
If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
?
until VCR indicator
source
4
on
the front
of VCR deck is viewed
panel lights
on
the TV
and
output
screen.
of
Types
Discs
Playable
Regional
code
This DVD
player is designed and manufactured for playback of region "2" encoded DVD
software. This unit can play only DVD discs
DVD
(8cm/12cmdisc)
labeled "2"
DVD audio discs
(8cm/12cmdisc)
Notes
Video CD
(VCD)
(8cm/12cmdisc)
?
on
or
"ALL".
Regional
Codes
Most DVD discs have
numbers in it
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
Audio CD
(8cm/12cmdisc)
?
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
2
player's regional
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
contains audio titles, MP3, WMA, and/or JPEG files.
Notes:
?
Depending
ment
or
on
the conditions of the
recording equip-
the CD-R/RW
(or DVD -R, DVD +R,
disc itself, some CD-R/RW
DVD
-
RW, DVD +RW)
(or
DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be
played
on
the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
use
shaped
or
(the
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
Manufactured under license from
Dolby Laboratories.
double-D symbol are
Logic", and the
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide
"DTS
Digital
Digital
patents issued and pending. "DTS" and
Digital
Surround"
Theater
Theater
registered trademarks of
Systems, Inc. Copyright 1996, 2003
Systems, Inc. All rights reserved.
are
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
are
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
are
only
two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
sided recordable
(Video CD)
with
stereo sound.
quality
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
assigned
easily.
a
reference number
film
or one
interview in
a
popular compression format used for digital
files that yields very high near-CD quality.
a
developed by
Microsoft
Corp.
audio discs
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
DivX
feature
of
name
which is based
on
a
the
revolutionary
new
using
new
video codec
MPEG-4
standard for video.You will be able
you to locate it
enabling
num-
easily.
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
compression
to play DivX
this DVD/CD/VCR receiver.
A distinct element of audiovisual information, such
the picture or sound track for a specific language
(DVD),
or a
Each track is
track of video
of audio.
as
musical
piece on a video or audio CD.
assigned a track number, enabling you
to locate the track you want. DVD discs allow
6
con-
Track
DivX is the
movies
only)
or accompanying
or
Scene
On
JPEG
a
is
additional feature content, or music
album.Each group is assigned a group reference
tent
WMA
type of coding / decoding
chapter
in
may not be recorded.
ber
Windows media audio file. A
series. Each
as a scene
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
The main audio content
MP3 is
you to locate it
enabling
Chapter (DVD video discs only)
A chapter is a segment of a title such
Group (DVD
MP3
audio
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
Title
and cast interviews could be title 3. Each title is
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
CDs.
as
discs.
VCD
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
(with multiple angles)
one
and several tracks
Front Panel
OPEN/CLOSE
Opens
or
closes the disc
(Z)
tray.
EJECT(Z)
Pause
tape
a
disc in the DVD
or a
or
VCR deck
repeatedly
Tray (DVD deck)
a
of
playback
Press
Insert
tape in the VCR deck.
PAUSE/STEP(X/C)
Remote Sensor
Point the DVD/VCR Combi receiver
remote control here.
Disc
the
Ejects
for
temporarily.
frame-by-frame playback.
STOP
disc here.
of
Stops playback
a
disc
PLAY
To
back
play
recorded
a
tape
REC/ITR
or
(x)
tape.
(B)
disc.
or
(z)
To record
normally or to
Timer Recording.
activate Instant
Cassette
TUNER FM/AM
To
change
between AM
Insert
and FM bands.
video cassette here.
a
window
Display
DVD/VCR
Select
on
Compartment
(VCR deck)
(output select)
of your output sources to view
the TV screen between DVD and VCR.
one
PROG./PRESET
(v/V)
To scan up or down through
to control tracking during playing
memorized channels
back
To tune in the desired station
a
or
tape (VCR mode).
(Radio Mode).
INPUT SELECT
Select the VCR deck's
VIDEO/AUDIO
source
(Tuner, A1, A2)
(Left/Right)
Connect the audio/video
output of
an
external
source
system, TV/Monitor, Another VCR).
Reverse SKIP/SCAN
DVD: Go to
beginning
of current
chapter/track
or
to
(S/Q)
previous chapter/track.
Press and hold for two seconds for
VCR: Rewinds the
tape during the STOP mode
or
fast
a
for fast
reverse
reverse
picture
search.
search.
Forward SKIP/SCAN
DVD: Go to NEXT
chapter/track.
(R/T)
Press and hold for two seconds for
a
fast
forward search.
VCR: Advances the
tape during the STOP mode
forward
or
picture
for fast
search.
VOLUME Control
STANDBY/ON
Switches the DVD/VCR Combi receiver ON and OFF.
Turn the knob clockwise to increase volume,
counterclockwise to decrease the volume.
7
Display Window
Indicates current
A disc is loaded in the DVD deck.
audio stream.
loaded in the DVD
(Lights
when
disc is
a
deck.)
WMA disc inserted
DVD/VCR Combi receiver is in VCR timer
mode
Indicates the unit is
radio mode.
or a
VCR timer
recording
is
recording
programmed.
DVD to VCR copy is in progress.
DVD/VCR Combi receiver is
Indicates current
surround mode.
Recording
a
tape.
Indicates the unit is
playing
back
a
tape
recorded in Hi-Fi.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
RADIO
VCD
ST
II PROG
PROLOGIC
CHP/TRK
Hi-Fi
DVD
MP3 TV
RPTALLAB
Total
Indicates current
track number
chapter,
or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights
up when
a
JPEG disc inserted.
8
stereo broadcast is
being
received in radio mode.
playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Remote Control
POWER
OPEN/CLOSE,
Switches DVD/VCR Combi receiver ON and
-
OFF.
-
0-9 numerical buttons
Selects numbered
in
options
a menu.
EJECT
OPEN/CLOSE
POWER
PROGRAM
Accesses
Program
or removes
Removes
CD/DVD/VCR select buttons
Select the
output
to view
source
the TV
on
(CD/DVD
CD/DVD
FM/AM
VCR
AUX
Select the DVD/VCR Combi receiver's tuner
the
as
program menu or a mark
MARKER SEARCH
on
the
AUX
For selecting the digital signal from
DIGITAL AUDIO IN (OPTICAL)
AV
menu.
preset stations from the
tuner memory.
DISPLAY,
AV
-
Selects
-
(left/right/up/down)
in the
option
an
menu.
PROGRAM
CLEAR
SOUND MODE
AUDIO
PR/TRK/PRESET
SET UP/ i
SET UP/ i
Access or
normally
or
TUNING-
TUNING+
DVD: Search
-
ENTER
backward*/go
beginning
current chapter or track or go to
previous chapter or track.
Enter
radio stations
a
RETURN
DISC MENU
Accesses
VOLUME
Marks any
*Press and hold button for about two
SEARCH
FORWARD
DVD: Search
VCR: Advances the
or
BACKWARD
Displays
FORWARD
forward*/go
chapter or
STOP
PAUSE/STEP
Selects
PLAY
tape
for fast forward
search.
STOP
MARKER
SEARCH
S-TITLE
MUTE
PAUSE/STEP
Pause
ANGLE
REPEATA-B
REPEAT
TV/VCR
CM SKIP
SPEED
TITLE
ZOOM
(A)
Stops playback.
(X)
playback
recording
temporarily/press repeatedly for
frame-by-frame playback.
Starts
a
DVD
silence the
speaker
of the
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
ZOOM
Enlarges
DVD video
image.
the disc's Title menu,
if available.
REPEAT A-B/SPEED/REPEAT
(G)
playback.
angle
language.
DVD/VCR Combi receiver.
-
camera
subtitle
Displays
RANDOM
-
ANGLE
Selects
menu.
TITLE
or
PLAY
a
Momentarily
*Press and hold button for about two
seconds.
MARKER SEARCH
MUTE
track.
in STOP mode
point during playback.
S-TITLE
(>)
to next
picture
PR/TRK/PRESET
REC/ITR
volume.
MARKER
search.
seconds.
(+/-)
Adjusts speaker
reverse
picture
into
DVD disc.
menu on a
tape
for fast
frequency
Displays functions on the TV screen.
Acknowledges menu selection.
in STOP mode
or
menu.
DISC MENU
(.)
to
VCR: Rewinds the
MEMORY
Recording.
BACKWARD
setup
remove
or an
the tuner.
(z)
activates Instant
Timer
language (DVD)
(CD).
MEMORY/ENTER
-
Records
audio
an
audio channel
-
REC/ITR
BYPASS,
LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
Selects
RETURN
setup
source
AUDIO
(b/B):
menu.
bands)
PRO
To tune in the desired radio station.
Removes the
and AM
(FM
Selects sound mode between
Select programme of VCR or Tuner Adjusts
manually the tape's picture onscreen.
TUNING
choice.
SOUND MODE
PR/TRK/PRESET(v/V):
-
listening
(Tuner, AV1, AV2).
display.
Switches among the clock, tape counter
and tape remaining modes on the display.
b/B/v/V
the
Selects the VCR deck's
CLK/CNT
Accesses On-Screen
Introducin
FM/AM Tuner select button
on
a
or
screen.
track number
Press to clear
of
(Z)
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
VCR)
menu.
CLEAR
EJECT
-
if
Repeat chapter, track, title,
Repeats sequence.
Selects recording speed.
all.
available.
CM SKIP
Fast forwards
picture
search
seconds
Play
through 30
of recording.
RANDOM
tracks in random order.
Note
This remote control
To
use
To
use
use
the
same
buttons for VCR and DVD functions
(ex. PLAY).
the
VCR, first press the VCR button.
the DVD, first press the CD/DVD button.
9
Rear Panel
AC Power Cord
Plug
into the power
source.
ANT.IN
COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
Connect to
(Y
TV with Y Pb Pr
a
Connect the aerial
using
this
jack.
Pb
Pr)
inputs.
RF. OUT
Connect to
a
TV with RF cable.
DVD/VCR OUT VIDEO OUT/AUDIO OUT
FM ANTENNA CONNECTOR
(Left/Right)
Connect the FM antenna to this
Connect to
a
TV with video and
audio
terminal.
inputs.
4
88
888
VCR IN LINE 1
(VIDEO
IN/AUDIO IN
(Left/Right))
Connect the audio/video
external
source
output of an
(Audio system,
TV/Monitor, another VCR).
S-VIDEO OUT
Connect to
a
S-Video
(DVD OUT)
Input on TV.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS
Connect the six
supplied speakers
to these terminals.
DIGITAL AUDIO IN
(OPTICAL)
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner
pins
Electrostatic
may
discharge
Remote Control
of the
cause
jacks
press the buttons.
Distance: About 6m
Angle:
remote
rear
sensor
unit.
Remote control
Operation Range
Point the remote control at the remote
remote
the
panel.
permanent damage to the
on
and
battery
Detach the
installation
battery
cover on
the
rear
of the remote control, and insert two
(20ft)
from the front of the
AAA AAA
R03
sensor
(size AAA) batteries
aligned correctly.
with
and
About 30°in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Installation and
Tips
Depending
Setup
your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
Caution
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
on
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
in
ding
2.
jacks
jacks
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting
the TV
on
Connect the Left and
to a TV
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's INPUT to
COMPONENT VIDEO.
When using the S-VIDEO OUT jack, set the TV'
INPUT to S-VIDEO.
Basic connection
s
(AV)
Connect the VIDEO
OUT to the video in
jacks
on
the TV
using
to the correspon-
the Y Pb Pr cable.
Right
(C)
AUDIO OUT
this unit's DVD/VCR OUT to the
the audio
jacks of
audio left/right in
cables. (A)
Notes:
jack on
jack on
Progressive to "On" on the setup menu for
progressive signal, see page 23.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
this unit's DVD/VCR
the TV
using
the video
1)
Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed on the
display window.
2)
Press STOP and hold it for five seconds before
releasing it. The video output will be restored to
the standard setting and a picture will once again
be visible on a conventional analog TV or monitor.
Connect the Left and
scan
Rear of this unit
(DVD
exclusive out
connection)
jacks of this
unit's DVD/VCR OUT to the audio left/right in jacks
on the TV using the audio cables. (A)
Basic connection
Right
InstaliodSeup
does not work with the analog
video connections (yellow VIDEO OUT jack) or
S-VIDEO connection.
Progressive
cable.(V)
1.
using
Player
Scan to On in error, you must reset the unit.
Make one of the following connections, depending
on the capabilities of your existing equipment.
2.
the DVD
on
Set the
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
1.
1.
AUDIO
88
4
(RF)
Connect the antenna cable from your indoor/ outdoor antenna to ANT.IN jack on the rear panel of
this unit.
2.
Connect the
RF.OUT
RF antenna cable from the
supplied
jack
on
the
panel
Input. (R)
television's Antenna
rear
Component Video (Color
of this unit to your
C
Stream ) connection
(for DVD)
1.
Rear of TV
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
in
2.
jacks
on
jacks
the TV
the unit to the
on
using
Connect the Left and
an
Y Pb Pr
Right
on
the TV
using
corresponding
cable. (C)
Pr
the audio
jacks of
audio left/right in
cables. (A)
Connect the S-VIDEO OUT
this unit to the
S-Video in
S-Video cable.
jack
on
the TV
Pb
Y
AUDIO INPUT
S-VIDEO
ANTENNA
INPUT
INPUT
R
A
V
S-Video connection (for DVD)
1.
COMPONENT/ ROGRESSIVE
SCAN VIDEO INPUT
VIDEO
INPUT
AUDIO OUT
this unit's DVD/VCR OUT to the
jacks
S
jack on
using the
R
(S)
2.
Connect the Left and
Right
AUDIO OUT
this unit's DVD/VCR OUT to the
jacks
on
the TV
using
the audio
jacks of
audio left/right in
cables. (A)
Progressive Scan (ColorStream Pro)
If your television is
connection
high-definition or "digital
ready" television, you may take advantage of the
DVD Player's progressive scan output for the
highest video resolution possible.
a
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the unit.
Rear of this unit
(Basic connection)
Note:
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable, do
not connect the yellow video cable.
11
Accessory
Audio/Video
(A/V) Connections
to DVD/VCR Combi
receiver
Connect the AV 3
jacks on the
component, using the optional
DVD/VCR Combi receiver to the audio/video out
on
your accessory
audio/video cables.
If the
auxiliary devices (e.g. DVD) are equipped
input jack of the DVD/VCR Combi receive.
Accessory
jacks
with OPTICAL OUT
jack,
connect them to to the
corresponding
Device Jack Panel
Front of this unit
VIDEO
OUTPUT
AUDIO
OUTPUT
R
L
DVD
Player
(or Digital Device, etc)
OR
OPTICAL
OUT
88
4
888
Radio Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
the AM loop aerial to the AM aerial connector.
?
Connect
?
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
(supplied)
(supplied)
88
4
888
Notes
12
?
To
prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components.
?
Be
sure
?
After
fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
to
as
horizontal
as
possible.
Speaker System
Connection
Connect the
the
speakers using
To obtain the best
surround sound,
possible
cords.
supplied speaker
adjust
Front
Speaker
(Right)
the
speaker parameters; distance, level,
Centre
Front
Speaker
(Left)
Speaker
4
88
etc..
InstaliodSeup
888
Rear
Speaker
(Right Surround)
Rear
Speaker
(Left Surround)
Subwoofer
Notes
?
Be
sure
to match the
speaker
cable to the
appropriate
terminal
the
on
components:
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
?
If you
front
use
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
the
speak-
ers.
?
Do not
remove
the front
of
cover
supplied speaker.
About Ferrite Core
Be
1
to attach the ferrite
sure
(for connecting
This ferrite
to this
core can
core
speaker
cables
unit).
a
reduce noises.
How to attach the ferrite
1. Push the
to the
core
stopper [a] of the ferrite
2
core
2. Wind the Subwoofer cable three times
to open.
on
A
Wind the Subwoofer cable
(A).
ferrite
core
once on
4. Close the ferrite
4
888
the
(B).
3. Pass the others
B
the ferrite
88
core
a
Make the
as
straight
core
on
the ferrite
core
3
(B).
short
length here
as possible.
A
until it clicks.
Notes
?
Take
care
ferrite
?
not to
pinch
the
speaker
cables between the
B
cores.
Attach the ferrite
core near
the unit
(Refer
to the
fig.3
and
comment.).
13
Speaker Positioning
In the
of normal
case
position
use
the 6
speakers (2
front
centre
speakers,
speaker,
2
speakers
rear
and
subwoofer).
If you want to
a
?
?
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
subwoofer.
Front
speakers
According to your listening position set up
interval between speakers to 45 degree.
the
speakers
for
equal
distance. And
by hearing position
set up the
Centre
The
speaker
centre speakers
and front
speakers
are
ideally
the
same
height.
But
normally place
it above
or
below the
television.
?
Rear
speakers
Place left and
right
behind the
listening
These
speakers
recreate sound motion and
atmosphere required
for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener's ears. It is also effective to direct the rear speakers
towards a wall or ceiling to further disperse the sound.
In the case of a smaller room size, if the audience is near to the rear wall set the rear speakers opposite each
other, and set the rear speakers above 60 90 cm than the listener's ears.
area.
-
?
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Rear
Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
14
Mini
Glossary
for Audio Stream
This unit
produce a 3D Surround effect, using 3D
Surround Sound technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to lis-
& Surround mode
Allows you to
discrete channels of
enjoy 5.1(or 6)
3D SURROUND
high
can
ten to multi-channel audio from
audio from DTS program sources such as
DVD and compact discs, etc.bearing the trademark.
a
home theatre. This feature
quality digital
works with DVD discs encoded with
discs,
Dolby Digital
Dolby
Pro
Logic
and
audio tracks.
DTS
Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
Software with multichannel surround audio
sound field. The term DTS is
according
Technology,
Technology,
a
trademark of DTS
BYPASS
to the way it
was
signals
is
played
recorded.
LLC. Manufactured under license from DTS
Sound Mode
LLC.
You
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
""
Use this mode when
""
which carries the
effect of
being
effect with
DOLBY
in
playing
PRO
mark.
movie theatre
a
which
intensity
an
movie
LOGIC
can
Dolby Digital 2 channel
This mode provides the
or
or
live concert house-an
only
SURROUND.
be obtained
The
effect
of
Logic
II creates five full-bandwidth
nels from two-channel
advanced, high-purity
the
any
spatial properties
new
sounds
or
sources.
This is done
output chan-
using
original recording
mode you want
below.
window
as
Each time you press SOUND MODE button, the
sound mode is changed in the following order;
PRO LOGIC
→
→
PL2 MOVIE
3D SURROUND
→
PL2 MUSIC
→
→
PL2 MATRIX
BYPASS
When DVD is inserted.
You
change the stream of DVD (Dolby Digital, DTS,
PCM, etc) by pressing the AUDIO button on the remote during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is
can
used.
an
matrix surround decoder that extracts
of the
the sound
the
(II)
Pro
repeatedly until
appears in the display
through
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much clearer and more dynamic than before.
Dolby
Press SOUND MODE
without
adding
Each time you press AUDIO button, the sound mode of DVD
is changed as the following order;
tonal colorations.
→→→
MOVIE mode:
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
For your reference
?
last mode
MUSIC mode:
The Music mode is for
and
provides
a
with any stereo music recordings,
wide and deep sound space. The Music mode
settings
use
?
includes controls that allow the sound to be tailored to individual
listening
tastes.
same as
the Music mode
the directional enhancement
mono
logic is
signals by making
except that
turned off. It may be used
them seem "larger." The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
disturbing
individually.
You can identify the encoding format of
program software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
source
-
The Matrix mode is the
cause
for each
-
MATRIX mode:
to enhance
The DVD/VCR Combi receiver memorizes the
surround
signals
ultimate "cure" for poor FM stereo
force the audio to mono.
from
Note
decoder. The
logic
reception may
a
be
simply
-
to
?
When you
play
sound tracks with 96kHz
frequency, the output signals
(sampling frequency).
sampling
will be converted to 48kHz
15
Before
in
Tuning
a
Operation-VCR part
video channel
on
your TV
6.
Your TV receives
recorder
(VCR)
signals
screen.
the
8
~
RF
a
from the video
7.
on
cables then your TV should already have a
dedicated video channel built into it, usually
called AV
Press PROG. 3
You
Make
VCR
also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a
ence
RCA lead.
8.
Select
a
that you have correctly installed your
described earlier in this book.
Press POWER to turn
Turn
2.
Insert
on
a
on
which you wish to
watch video's.
pre-recorded
video
on
when you have finished.
Tune this channel so that
on
a
the front of your VCR
bright
blue
screen
your TV.
tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
watch video's.
Don't worry if you don't have a video-tape to play
at this stage! If you switch your VCR on and continue stages 3
4, instead of seeing video play~
back tune your TV until you
STANDBY/ON
appears.
Store this channel
your VCR.
your TV.
on
TV channel number
.
sure
as
4 to select another video chan-
or
can
Press
1.
36
nel. You may select any channel number between
28 and 68.
like another TV station. You
channel number
CHANNEL
PSET
R
your TV
and tune it in so that you may watch video
tapes. If you have used AUDIO and VIDEO
have to select
4 on the front of your VCR for
RF36 will appear in the display window.
The following picture will be displayed on the TV
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
already used by another TV station, or if
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
will show you how to change the output
frequency of your VCR.
or
than 4 seconds.
more
Notes
is
Press PROG. 3
see a
bright
blue
Note
Make
that you have correctly installed your
VCR and successfully tuned in a dedicated
sure
your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video tapes!
video channel
on
screen.
3.
Tune this channel until the video
picture
is
sharp
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is
optimum
4.
video
playback
Store this channel
on
already pre-tuned
for
your TV.
your TV.
You will need to look at the TV instruction book if
on
time
Following picture will display on the TV screen
when you have just connected your video
TV
To make
tuning
3 to 4
shown "ACMS"
as
stations, please follow stages
(see p.18).
8 if you cannot
carry out stages 5
obtain clear video playback as described in
Only
stages
~
1
4. Select
~
a
TV channel number
on
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be
16
for the very first
recorder for the very first time.
you do not know how to do this.
5.
Using your VCR
displayed).
ACMS
Pr-12
ACMS
Setting
the clock
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
1.
1.
Press i.
2.
The main
3.
Press 1
menu
will appear
on
the TV
screen.
Press i.
Press 1
or
2 to select TIME DATE.
or
2 to select the SYSTEM and press
or
4 to select
ENTER.
Press ENTER.
4.
Press 3
according
to the COLOUR
system used.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
TIME
DATE
VCR
REC
Dr.
E
fOS
2.
Use the numbered buttons
to alter the
ON
OFF
the remote control
on
HOURS, MINUTES, DAY,
MONTH and
OPR
Press 1
or
2 to select the RF AUDIO.
YEAR.
Press 3
or
4 to select
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
used.
The
of the week will appear
when you enter the year.
day
5.
according
to the RF AUDIO
automatically
VCR
REC
E
Dr.
fOS
ON
OFF
OPR
HHMNDDMMYY
8
:.
00101
.
THU
6.
Press i to
remove
the
menus
from the TV
screen.
TIME
DATE
3.
If you make a mistake press 1
correct details.
4.
Press i.
or
2 and enter the
17
How to
using
This VCR
can
the
menus
The
the main
be
easily
displayed
menus are
Tuning
menu
programmed by using
on screen.
controlled from the Remote
Control Handset.
1.
Switch
ing
2.
your TV set and video recorder
the POWER button.
by
press-
Press i button.
will appear
menu
on
the TV
Automatically
is weak your VCR may
not detect the necessary information and will not
be able to store them correctly. To overcome this
If the TV broadcast
section
on
signal
turn to the MANUAL TUNING
problem please
on
The main
in TV Stations
page 19.
1.
Press POWER to turn
2.
Press i button.
The main
screen.
Press 1
your VCR.
on
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press ENTER.
VCR
PSET
R
Pr-12
ACMS
Dr.
NIC
fOSD
ON
OFF
OPR
VCR
12
Pr-12
REC
Timer
recording setting (see p. 28).
PR SET Manual tuning setting (see p. 19).
ACMS ACMS (Automatic Channel Memory
System) (see p. 18).
TIME DATE
Date & clock setting (see p. 17).
SYSTEM To set the Colour TV System
(see p. 17).
Dr. To check a problem with your VCR
(see p. 41).
F.OSD ON/OFF To display the operational
-
PSET
R
REC
Dr.
Pr-12
NIC
fOSD
ON
OFF
OPR
-
-
-
O
O
O
-
ACMS
-
-
Pr-12
ACMS
3.
mode of your VCR
(see
O
O
OPR
NIC
-
-
To
the
improve
(see p. 26).
To activate
digital
or
sound
Press ENTER
to start the automatic
again
tuning
process.
41).
playback picture
p.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
deactivate the NICAM
(see
p.
42).
S
E
Pr-12
ACMS
Tip
You
change the menu language on the DVD
setup menu. (See the Menu Language on page 22.)
3.
can
Press 1 and 2 to select the desired
Press ENTER and press 3
4.
Press "i" to return to
a
TV
or
menu.
4.
The TV STATION TABLE will appear when
is complete.
Press i to
save
4 to select.
picture.
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
18
settings.
your
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
4.
Manually
areas
TV stations
Press 3
or
4 to
correctly.
You must tune in these weaker broadcast
in order for your DVD/VCR
Combi receiver to store them.
stations
1.
stop when it locates
PR
CH
09
C10
Press 1
or
STATION
:
AV
P
R SET
5.
will appear on the TV
2 to select the PR SET.
MFT
CHANNEL/CABLE
Press i.
menu
station.
adjust.
manually
The main
a
Press 2 to select MFT.
of the country broadcast signals
may be too weak for your DVD/VCR Combi
receiver's automatic tuning process to find or
assign
will
Searching
screen.
Press 2 to select STATION
that you may
so
name
your TV station.
Press ENTER.
Press ENTER.
PR
PR
CH
01
MFT
STATION
00
PR-01
C09
CH
MFT
C10
00
STATION
VCR
Pr-12
REC
ACMS
2.
CHANNEL/CABLE
NIC
fOSD
ON
OFF
Dr.
:
AV
P SET
R
PSET
R
OPR
6.
Press i.
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune
(for example,
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
PR
Press 3
or
the
station
new
Press 1
or
4 to select letters and numbers for
2 to
name.
move
back and forth between
characters.
09).
Press ENTER.
PR
C09
CH
MFT
C10
00
STATION
,
P
SET
R
3.
Press ENTER.
7.
Press AV to select C
(Standard stations)
or
S
Press i
(Cable stations):
C02
-
C69, S01
Your
-
S41.
Enter the channel number of station that you want
to tune with the numbered buttons
to find the
Press i, confirm the station
required
or use 3 or
again.
new
TV station has
If you wish to
stages 1 7.
-
4
station.
11
12
13
14
09
CH
been tuned into your VCR.
tune other stations repeat
now
manually
10
PR
placement.
MFT
STATION
--
----
15
16
PSET
R
CHANNEL/CABLE
:
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
AV
PSET
R
19
the order of TV Stations
Changing
TV stations into your DVD/VCR Combi
receiver you may wish to change the order in
which they are stored without having to retune them
After
tuning
against!
The instructions
show you how you
desired order.
1.
can
given on this page will
simply move them into your
Deleting
TV stations into your DVD/VCR Combi
receiver you may wish to delete a station.
The instructions given on this page will show you
After
how
1.
Press 1
tuning
delete any unwanted TV stations.
easily
Press i.
The main
Press 1
Press i.
The main
will appear on the TV
2 to select the PR SET.
menu
or
TV Stations
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press ENTER.
screen.
Press ENTER.
PR
CH
MFT
STATION
00
PR-01
01
VCR
Pr-12
REC
PR
CH
01
MFT
STATION
00
PR-01
ACMS
fOSD
ON
OFF
Dr.
CHANNEL/CABLE
NIC
:
AV
PSET
R
OPR
VCR
Pr-12
REC
ACMS
fOSD
ON
OFF
2.
Dr.
:
2.
AV
P
R SET
OPR
or
4 to select the programme number
you want to delete.
(for example,
move
02
C03
00
PR-02
03
C05
00
PR-03
04
C06
00
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
PR
(for example,
03)
4 to select the programme number
or
you want to
Press 2.
Press 3
Press i.
Press 3
Press i.
Press 3
3.
CHANNEL/CABLE
NIC
MOVE
:
DELETE
:
PR
03).
01
C02
00
02
C03
00
PR-01
PR-02
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
07
C08
00
PR-07
08
C09
00
PR-08
02
C03
00
PR-02
03
C05
00
PR-03
04
C06
00
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
:
DELETE
:
,
03
3.
PR-06
Press 1.
After
short while, the selected station will be
deleted.
PSET
R
,
a
4 to select the programme number
you want to move to (for example, PR 05).
or
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
PR-02
PR-04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
04
MOVE
01
C02
00
PR-01
02
C03
00
PR-02
04
C06
00
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
MOVE
DELETE
PSET
R
:
:
,
05
4.
PSET
R
Press i to
remove
the
menus
from the TV
If you wish to delete other TV stations
stages 1 3.
screen.
repeat
-
4.
Press ENTER.
The selected programme will be moved to the
new programme number.
If you wish to
Press i to
move
other TV stations
remove
the
menus
repeat stages
from the TV
1
-
4.
01
C02
00
PR-01
02
C03
00
PR-02
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
screen.
MOVE:
DELETE
PSET
R
01
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations
ways.
Press 3
or
:
,
Stored TV stations:
can
be selected in either of two
4 to select different stations that are tuned
into your DVD/VCR Combi receiver.
You may also directly select stations
numbered buttons
20
on
using
the remote control.
the
Before
Operation-DVD part
On-Screen
You
Display
the
the TV
general playback status on
screen. Some items can be changed using the
To use the on-screen display:
display
can
1.
Press DISPLAY
2.
Press v / V to select
Press b / B to
an
item.
inputting
change
the title
the
For
number).
also
functions,
some
setting.
provide
0:20:09
Display only
AUDIO
OFF
ABC
Display only
all of the features
Page (or Angle)
b/Bor
ANGLE
or
?
If
no
button is
pressed for 10 seconds,
display disappears.
screen
Playback
the
on-
Status/Restrictions
TITLE
A-B
1/9
Repeat
title
Repeat
sequence
Enter
a
1/3
Example: On-Screen Display during
playing VCD
Selection Method
Items
Marker
Track Number
MARKER SEARCH
123456789
Marker Search
Resume
Action
play
prohibited
or
(or
menu
from this
PBC
1/3
mode)
0:20:09
Audio Channel
STEREO
Selection Method
3D SUR
Chapter
Number
1/12
B, Numbers
Track Number
1/3
0:20:09
Audio
language
and Digital Audio
Output mode
Angle
Sound
Numbers
b /
B, Numbers
ENTER
Time search
0:20:09
Numbers, ENTER
ENTER
Time search
Subtitle
B,
b/B
Selection Method
Items
ENTER
b /
AUDIO
Example: On-Screen Display during
playing divx movie disc
Example: On-Screen Display during
playing DVD Video
1/3
ENTER
b/Bor
Sound
Title Number
B, Numbers
Numbers
point
b /
b /
ENTER
Time search
not available
Items
InstaliodSeup
b/Bor
mode
language
B, Numbers
ENTER
DVD Audio
Subtitle
Notes:
Some discs may not
shown below.
b /
Time search
Output
B, Numbers
ENTER
Track Number
setting. You can
appropriate (e.g.
press ENTER to execute the
?
b /
Number
highlighted.
the number buttons if
use
Selection Method
Items
Group
during playback.
The selected item is
3.
menu.
Example: On-Screen Display during
playing DVD Audio
language
Numbers,
ENTER
b/Bor
Audio
language
and Digital Audio
Output mode
b/Bor
1
MP3
AUDIO
Subtitle
ABC
1 ENG
ABC
ENG
b/Bor
S-TITLE
b/Bor
S-TITLE
1/3
language
AUDIO
Sound
3D SUR
b/B
b/Bor
ANGLE
3D SUR
b/B
21
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 22 to 25.
To
display
display
the
Disc Subtitle
Off
Disc Menu
Original
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
then press
to the second level. The screen shows
option
the selected item,
Use v / V to select the second desired
press B to
move
as
well
option
as
then
Select
a
language
for the
Use v / V to select the desired
5.
Press SETUP
then press
ENTER to confirm your selection. Some items
require additional steps.
setting
PLAY to exit the
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
DVD-V
Setup
menu.
original language
Other: To select another
on-screen
DVD-A
track
in which the
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
to the third level.
4.
or
Language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
the current
Menu
Disc Audio / Subtitle / Menu
Operation
move
Move
display.
To go back to the previous level:
Press b on the remote control.
22
Original
screen.
To go to the next level:
Press B on the remote control.
3.
Disc Audio
A second press of
menu.
SETUP will take you back to initial
B to
English
Language
and exit the Menu:
Press SETUP to
General
Menu
5.
DISPLAY
Pressing
scan
DISPLAY
TV
16
Aspect
Display
Mode
Progressive
:
DVD-V
Aspect
4:3
:
Select when
Display
Display
Mode
Select
a
DVD-V
setting
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
AUDIO
DVD-A
works
only
when the TV
Aspect
the
on
Automatically displays the wide picture
screen and cuts off the portions that do not
on
entire
fit.
audio
system you
use.
5.1
the
Select
Speaker Setup
DRC
On
Vocal
On
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
progressive
scan:
Connect
component out of this unit to the input of
your monitor/television, set your television or monitor
Component Input.
1. Select
variety of audio output options.
options according to the type of
a
AUDIO
Panscan:
to
Each DVD disc has
Set this unit AUDIO
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
To turn On
InstaliodSeup
16:9 wide TV is connected.
mode is set to "4:3".
Progressive
Press STOP and hold it for five seconds before releas-
2)
standard 4:3 TV is connected.
16:9 Wide: Select when
Mode
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "NO DISC" is displayed on the display window.
DVD-A
a
mode.
Caution:
Once the setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Off
Move
TV
Progressive
9Wide
Widescreen
Scan
ENTER will set this unit to
"Progressive
Scan"
on
the DISPLAY
menu
DVD-A
Speaker Setup
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 38.)
Dynamic Range
Control
(DRC)
DVD-V
DVD-A
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
DISPLAY
Aspect
Display
DVD-V
5.1
Select
DivX
then press B.
TV
Move
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Mode
Progressive
Scan
On
Off
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
effect.
Vocal
DVD-V
Set to On
3. Press ENTER to confirm your selection.
The confirm menu will appear.
playing.
only
DVD-A
when
a
multi-channel karaoke DVD is
The karaoke channels
on
the disc mix into
normal stereo sound.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
4. When the confirm
Cancel is
to
menu
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
23
OTHERS
DivX(R)
The PBC, Auto
Play
and
DivX(R)
VOD
settings
can
be
changed.
You
VOD
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
can
OTHERS
PBC
Auto
On
Off
Play
DivX(R)
DivX(R)
Your
Select
VOD
Video On Demand
registration
To learn
code is
more
:
XXXXXXXX
visit
www.divx.com/vod
PBC
Set
(Done)
Select
Move
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
are
or
Off.
encrypt
played according
to the
PBC.
Off: Video CDs with PBC
are
played
the
same
way
as
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
You
Play
Display
View
can
can
Play
function is active.
Off: Auto
Play
function is not active.
use one
of your 3 views now?
automatically.
On: Auto
VOD Rental
Do you want to
Play mode is set to On, this DVD player will
search for title that has the longest playback time and
back the title
DivX(R)
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
Play
function may not work for
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
24
options
watch the file.
This rental has 3 views left.
If Auto
play
the number which you
DVD-V
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
then
file.
Notes:
Audio CDs.
Auto
move
of
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Country
AE
Code
can
(Security Code)
enter
on
2. Follow
shown left
Input
Rating
for children to view.
that may not be suitable
of these discs contain
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
control feature allows you to block
to scenes below the rating you input, there
new
forget your Security
1.
Press SETUP to
2.
Input
3.
the
6-digit
the
can
Setup
clear it
InstaliodSeup
using
menu.
number "210499" and the
Enter
a new
code
Country
1. Select
Enter the code of the
"Rating"
on
the LOCK
menu
then
security
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
1.
tions and
DVD-A
country/area
whose standards
Select
"Country
from 1 to 8
using
Rating one (1)
rating eight (8) is
on
2.
Follow
3.
Select the first character
4.
Shift the
the v / V buttons.
has the most restric-
Code"
the LOCK
on
menu
the
then
press B.
5.
1-8:
DVD-V
Code
second
a
described above.
used to rate the DVD video disc, based
list in the reference chapter.
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
as
were
press B.
Rating
Code
display
your children from being able to view
material you believe is unsuitable.
3. Select
menu.
by
preventing
2. To
or
code is cleared.
parental
access
(Rating). "Change"
If you forget your security code you
the following steps:
alternative.
The
then press B.
then press ENTER.
4-digit code,
again to verify.
it
menu
highlighted.
4. Press SETUP to exit the
scenes
Many
as
the LOCK
Select
DVD-A
Some movies contain
2
step
3. Enter the
DVD-V
change password.
1. Select Password
"New" is
Move
or
step
2
as
shown left
(Rating).
using
v / V buttons.
using B button and select
character using v / V buttons.
cursor
Press ENTER to confirm your
selection.
the
country code
the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the
same
disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
25
Operation
Playing
a
You will
be able to load and
only
Tape
eject video cassettes
receiver is plugged into
when your DVD/VCR Combi
the mains. Your DVD/VCR Combi receiver may also
playback recordings from NTSC tapes (on PAL TV).
better
Getting
a
When
cassette is inserted and
a
picture
playback started,
the
automatic
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control or
press PROG. 3 or 4 on the front panel to manually
adjust the tracking until any distortions have been
removed. Press numbered 0
switch automatic
1. Make
back
tracking
the remote control to
on
on
again.
sure
this book.
your TV. Press POWER to turn on your
DVD/VCR Combi receiver. Insert the video cassette
on
into your DVD/VCR Combi receiver. The video cassette should have the window side facing up and
the
arrow
facing
away from you.
2. Press PLAY to start
playing
your tape.
video cassette which has had its
If you load a
record protection tab removed, playback of the
cassette will start automatically.
Your VCR will
automatically adjust the tracking to
give the best picture quality.
If noise bars appear during playback, adjust the
tracking manually by pressing PR/TRK (3/4).
3. Press PAUSE/STEP to still
Press PAUSE/STEP
picture.
repeatedly to advance
a
the
tape frame by frame.
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal
for up to 5 minutes.
After 5 minutes your DVD/VCR Combi receiver will
stop the tape to prevent damaging the tape or your
can
be
paused
DVD/VCR Combi receiver. Still
be
slow motion and shuttle, the noise bars may
appear on the picture according to the status of
During
tape.
If distortions
can
them with D
or
picture quality
improved slightly by pressing 3 or 4.
4. Press PLAY to continue
played
26
or
back at
picture,
reduce
playback.
Press EJECT.
tape is reached, your DVD/VCR
Combi receiver will stop playback automatically,
rewind, stop, eject the tape.
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
1 Press 30 seconds
2 Press 60 seconds
playing
4 Press
120 seconds
5 Press
150 seconds
6 Press
180 seconds
OPR
(Optimum Picture Response)
This feature automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
the condition of the
tape.
1. Press i.
2. Press 1
or
2 to select OPR.
3. Press ENTER.
your tape.
VCR
12
12
R
the
Logic search:
During fast forwarding
FORWARD
in the
can
During playing back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
are on
seen
E.
6. Press STOP to end
Picture search:
where you
be
3 Press 90 seconds
AUTO TRACKING
playback. Tapes
To switch off the slow motion and shuttle, press the
desired function.
If the end of the
that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
Turn
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
5. Slow motion
tape.
MS
C
f
ON
OFF
4. Press
3
or 4
rewinding press and hold
BACKWARD the picture will be
7 times normal playback speed.
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
SHARP.
Please note you may
or
Dr.
playing
a
only
tape.
5. Press i return to
screen.
set OPR when
or
Instant Timer
Recording (ITR)
5.
runs
6.
incorporates Long
which enables you to record up to twice
the amount of time on a video cassette. For examE-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to
an
7.
Press PAUSE/STEP to avoid
recording.
during ITR, this
If you press PAUSE/STEP
DVD/VCR Combi receiver will enter the record
LP.
pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
tape is paused. After 5
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
this book.
DVD/VCR Combi receiver.
Make
sure
Press POWER to turn
on
your DVD/VCR Combi
receiver.
Insert
video cassette with
a
facing
Press
up and the
3
protection
tab into
or 4
arrow
facing
away from you.
to select the programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote
control.
4.
8.
displayed
when
Press STOP to end
a
recording.
Press EJECT.
your DVD/VCR Combi receiver.
The video cassette should have the window side
3.
unwanted
Press PAUSE/STEP to continue
will be
2.
recording
scenes.
record up to 360 minutes. Please note there will be
a slight loss in picture and sound quality when
1.
recording.
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Play (LP)
using
Press REC/ITR to start
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
Your DVD/VCR Combi receiver
ple
or
produce improved picture and sound
quality, however LP will provide twice as much
recording time as SP.
Instant Timer
video cassette
Long Play
SP will
Your DVD/VCR Combi receiver allows you to make
recordings using a variety of simple methods:
Recording (ITR) start recording
immediately for a set period of time or until the
Press SPEED if you wish to record in
Standard Play.
If you wish to record directly from the AUDIO L/R
(VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
(L(MONO)/R)/
VIDEO IN terminals
repeatedly
EJECT will appear
seconds.
on
the TV
screen
for
a
few
Notes:
If you do not wish to record
on a
tape (this
can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
cassette.
It is
possible to record on a video cassette
record protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press AV until the socket you wish to record from
is displayed.
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
AV 1 for
your TV.
VIDEO
recording from AUDIO L/R (VCR IN AV1)/
(VCR IN AV1) terminals on the rear of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
on
(L(MONO)/R)/
the front of your unit.
27
recording using On Screen
Display
Timer
PR
DATE
PR-01
You may set up to seven timer record events
within one month of the current date.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
SUMOTUWETHFRSA
--
--
--
::
--
--
~
--
Note
Before setting the timer make sure that you have
set the VCR clock correctly and you know which
stations you have tuned TV stations on your VCR.
1.
2.
Insert
a
video cassette with
6.
tab into
protection
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
your VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press i.
Press 1 or 2 to select REC.
Press ENTER.
PR
DATE
PSET
R
pressing
3
or
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
PR-01
DATE
16
TIME
190020
::
OPR
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
setting
are
PR
DATE
7.
SP
--
Press 2 to select the
SP
--
Press
3
or 4
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
recording speed.
to select the desired
or
remove
::
--
--
~
speed from SP to LP, if
complete recording the program.
or
and
PR
PR-01
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
DATE
TIME
16
19002000
::
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
SP
--
necessary, to
~
SP
--
tape is left and
switches
3
tape speed
LP).
SP
--
SP
--
,
TIME
--
SP
--
SP
--
full press
to select the event that you wish to
replace. Press 1 to delete the event.
4
SP
--
SP
--
the timer record
event. If all timer record events
SP
--
SP
--
(SP, IP,
Press ENTER to start
SP
--
IP mode determines how much
3.
SP
--
SP
--
Dr.
DELETE:
by
4.
PR
NIC
fOSD
ON
OFF
ACMS
You may also select the the start and end times
TIME
VCR
Pr-12
Press the numbered buttons to enter the recording start and end times of the programme that you
wish to record.
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
--
SP
--
SP
--
SP
--
8.
Check that the timer event details
are
correct.
Press i twice.
If PLEASE CHECK is
4.
you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your VCR Standby.
will appear in the display window while your
VCR waits to make the recording. To watch a DVD
during timer recording standby mode, press
POWER and DVD to switch to DVD mode.
Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
-
9, press 0 first, then
the channel number; for example Stations 3 03.
You may also select Channels by pressing 3 or 4.
-
Once selected press 2.
If you wish to record from AUDIO L/R
VIDEO
(VCR
IN
AV1)
or
VIDEO IN from the back
AUDIO IN
or on
press AV to select for correct
PR
5.
DATE
(VCR IN AV1)/
(L(MONO)/R)/
the front of your unit,
display (AV1
or
AV2).
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
Press the numbered buttons to enter the date of
the programme.
If you press ENTER before
entering the date you
following automated record-
may select one of the
ing features. Press 1 or 2 to select, then press
ENTER to confirm. DLY To record every day
(except Saturday and Sunday) at the same time.
SU
SA To record at the same time every week.
~
28
9.
Press STOP to end
displayed,
recording.
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
change.
Press 1 to delete the event...or
Press ENTER to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme will always be given priority.
Example:
Programme
1 is programmed to start at 16:00 and
end at 17:00.
Programme 2 is programmed to start at 16:30 and
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme 2
will be recorded.)
If Timer record events
Overlap...
Change (Deleting)
Do not
overlap programmes, since overlapping portions of the conflicting programmes will not be recorded. Earlier recording times have priority over later
recording times as shown in the diagram.
If at
the Timer
Programme
later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
a
again. Simply display
the timer event
screen.
Press D
E to select the event that you wish to delete
change. Press F to delete the event...or
or
Example:
Programme
1 will be recorded in its
the last 30 minutes of
Programme
entirety,
but
only
2 will be recorded.
or
then press F or G to select;
Station, Date, Start and End times and LP.
Press ENTER to
Press D
or
change,
E to enter the correct information.
PROGRAMME 1
17:00
16:00
17:30
16:30
PROGRAMME 2
(This portion
If two
programmed
will not be
timer
recorded.)
recordings overlap
at
midnight
00:00 a.m., programme 2 will not be recorded.
29
Playing
DVD
a
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
able
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the playback
3.
side down.
Press OPEN/CLOSE to close the
4.
starts
If
automatically.
playback
tray. Playback
does not start,
press PLAY.
In
some
cases, the disc
menu
might
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
Use the b B v V buttons to select the
title/chapter
view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
you want to
screen.
4
buttons to select
want, then press ENTER to view the
option
option.
an
you
When
disc has
stopped
then the
b / B to
move
You
settings
and
operating
(See
"PBC"
on
page
24).
?
title, you
to
can move
playback is
appropriate number (0-9) or use
to another title.
can
its number while
When
title
a
disc has
er
?
disc has
on a
more
than
chapter/track
Press .
as
one
more
than
track, you
one
chapter
can move
or a
to anoth-
follows:
briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
Press . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
or
>
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
Search
1.
Press and hold .
or
> for about two seconds
during playback.
If
The
control is set and the disc is not within
parental
the rating settings
(See "Lock Menu"
you must
on
page
input
25.)
the
password.
2.
player.
(two).
The
region
code for this
To watch
DVD
during
timer
a
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
.
to select
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
is 2
recording standby
mode, press POWER and DVD
player
the
DVDs may have a region code. Your player does not
play discs that have a region code different from
your
?
one
to another CHAPTER/TRACK
Notes:
?
than
Moving
procethe
dures may differ. Follow the instructions on
each menu screen. You also may set PBC to Off
more
play any title by inputting
playback is stopped.
Use the number buttons to select the track you
want to view and press RETURN to return to the
Menu
a
another title. Press DISPLAY while
?
menu screen.
menu.
to another TITLE
?
3
Setup
Moving
appear
instead:
Use the 1 2
the
on
to switch to DVD
3.
To exit SEARCH mode, press PLAY.
mode.
Changing
the Audio Channel
Press AUDIO
ferent audio
30
repeatedly during playback to hear
channel (Stereo, Left, or Right).
a
dif-
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
Press
DVD Video Discs
?
Slow Motion
Press PAUSE/STEP
1.
The DVD
player
will
?
Title:
?
Off
?
go into PAUSE mode.
?
?
Press .
2.
The
player
>
or
during
pause.
will enter SLOW mode.
Use the .
or
> to select the
t 1/16, t 1/8, t 1/4
or
t 1/2
T 1/16, T 1/8, T 1/4
or
T 1/2
required speed:
(backward), or
(forward).
Note:
Slow motion
playback
in
reverse
is not
with
possible
Video CDs and DivX Discs.
?
?
?
Random
Press RANDOM
or
and RANDOM appears
Press RANDOM
2.
in
mode.
during playback
stop
automatically begins random playback
The unit
again
the TV
on
screen.
.
or
Random
to normal.
during Random playback,
title (track) and resumes
a
setup
menu
to
use
must set PBC to Off
the random function
(See
To
1.
2.
3.
To
"PBC"
on
page
produce
Press A-B at your chosen
appears briefly on the TV
starting point.
Use 3
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
A
*
"
to cancel.
end
during playback.
4 to select the sound
or
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
To turn off the 3D Surround effect, select "Normal".
Time Search
2.
playing
at any chosen time
on
Press DISPLAY
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
"-:--:--" appears.
screen.
Press A-B
Chapter (Track) play-
3D surround effect that simulates multi-
a
box shows the
"
play repeatedly.
2.
sequence.
Press A-B
does not
:
Press DISPLAY
1.
a
Off
To start
A-B
repeat
repeats the current track.
Group: repeats the current Group.
1.
the
on
24).
Repeat
Repeat Track/Group/Off
Track:
The sound
PBC, You
-
3D Surround
3.
Video CD with
CDs,
Repeat Track/All/Off
Track : repeats the current track
All : repeats all the tracks on a disc.
Off : does not play repeatedly.
-
If you press > once during Repeat
back, the repeat playback cancels.
playback.
Note:
On
DivX Discs
speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
>
the unit selects another
play repeatedly.
channel audio from two stereo
Tip:
By pressing
current title.
Notes:
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on page
24).
?
1.
repeats the
does not
:
-
DVD Audio Discs
To exit Slow Motion mode, press PLAY.
3.
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
Video
(X) during playback.
now
a
repeat mode.
To exit still motion mode, press PLAY.
2.
title/chapter/all/track on a disc.
REPEAT during playback to select a desired
play
can
point.
screen
3.
Input
the
required
start time in
seconds from left to
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
and the
4.
right.
Press ENTER to confirm.
Playback
starts from the
selected time.
31
Zoom
Use
1.
to
zoom
enlarge
Press ZOOM
the video
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
1600% size
→ screen
fit mode
→
DVD Features
Checking
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
Special
1.
change the way the image appears on the
when you're playing a DVD movie. Press
can
4.
To
through
the
normal
repeatedly
or
?
may appear.
Press DISC MENU
To enter
If the disc contains
Marker
a
point
the TV
screen
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
on
markers.
To Recall
or
1.
During
disc
search
menu
Clear
a
Marked Scene
scene.
playback
a
marker
starts from the
Or, press CLEAR and the marker
number is erased from the list.
on
and
any marker by inputting its number
the marker search menu.
can
again
menu
is
displayed.
to exit.
Angle
recorded at different
scenes
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Changing
press SEARCH. The marker
appears on the screen.
Press ENTER and
You
options,
the Audio
Language
playback,
Within 10 seconds, press b / B to select
number that you want to recall or clear.
marked
4.
angles,
as camera
camera
playback from up to nine memorized
To enter a marker, press MARKER at the
start
can
desired
3.
subtitle
Press DISC MENU and the disc
Camera
2.
menu, the
Otherwise, the disc
screen.
offers features such
Marker Search
points.
a
Disc Menu
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD disc,
VR disc and movie file.
You
the b
Press TITLE to exit.
3.
CLEAR button.
Notes:
?
menu
spoken language and
chapters for the title.
press ZOOM
playback,
appears
menu
on
the
menu
The
2.
picture.
resume
or use
selection. Then press
Press TITLE. If the current title has
3/4 to select between Normal, Enhanced, and
Maximum.
zoomed
number
100% size
You
move
corresponding
to highlight your
ENTER.
Title Menu
Use the bBvVbuttons to
the
B v V buttons
Screen fit mode:
screen
3.
Input
play
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
main and
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
a
a
Subtitles
Press S-TITLE
different
repeatedly during playback
subtitle languages.
to
see
the
Note:
?
The subtitle file of the DivX file is
smi,
?
srt and sub.
If there is
no
information
not read in the DivX
32
displayed only
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
DVD Audio Discs
DVD Audio is
Moving
disc format
the
building
cess of DVD to provide high quality, uncompressed,
multi-channel audio for a new experience in audio
quality. A DVD Audio disc can be identified by the DVD
audio logo on the disc jacket or on the disc itself.
DVD Audio
a new
on
suc-
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
can
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press 3/4 to select
3.
Press 1/2
a
or
during playback
on
in
stop mode.
icon.
Group
the numbered buttons
(0-9)
to select
group number.
Note:
DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
tent that
used for music, either Advanced Resolution multichannel sound quality that is closer to the artist's mas-
word. If the lock icon appears on the TV screen, enter
the password (sometimes you'll find it on the disc's
typical
ter
recording
or
for
Audio discs contain
longer recordings. Many
on-screen
text, such
biographies, playlists, or lyrics. Some
contain photo galleries or video clips.
as
enjoy
maximum sound
quality
jacket
artist
isn't dictated
DVD Audio discs
a
only
be accessed
cover or on a
web
site).
by entering
This
a
password
con-
pass-
control
by your DVD/VCR Combi receiver
function of the disc.
---
it is
Since the
authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be available for the disc you're playing.
Operation
and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/VCR
Combi
can
DVD
Note:
To
Sometimes the author of the disc creates hidden
receiver). If you use the DIGITAL OUT
(OPTICAL or COAXIAL) for your audio connection,
the sound will only be similar to CD-quality sound
even though you're playing a DVD Audio disc.
Viewing
another PAGE
Since DVD Audio discs
lot of content, there
what's available on the disc.
can
hold
a
are
various ways to
see
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be available for the disc you're playing.
33
Playing
an
Audio CD
or
MP3/WMA
Disc
MP3 / WMA disc
limited
?
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
compatibility
with this
player
is
follows:
as
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY
or
ENTER and
?
?
starts.
playback
AUDIO CD
0:52:07
1/12
List
Program
creates
Track1
Track2
Track3
?
Track4
File
an
names
and must
Track5
Track6
Track7
?
Clear All
Track8
PROGRAM
They
ISO 9660 file
should have
system.
incorporate
an
a
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
folder, and press ENTER
a
the folder contents.
see
Press v / V to select
ENTER.
Playback
track then press PLAY
a
or
starts.
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
PROGRAM
Info
Edit
should
Tip:
?
owner.
If you
are
in
a
file list
return to the Folder
the MUSIC
on
list,
menu
the v / V to
use
and want to
highlight
and
press ENTER.
?
Press DISC MENU to
?
On
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO
a
word
?
on
When
top of the
playing
titles, you
34
to the next page.
move
a
menu
file
can see
is
highlighted.
containing
information such
the information
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
by pressing
as
track
DISPLAY.
always
be
sought
from the
copyright
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
1.
2.
Press RANDOM
during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
Press PAUSE/STEP
To return to
press
2.
during playback.
playback, press PLAY,
PAUSE/STEP again.
ENTER
To return to normal
until
repeatedly
or
playback, press RANDOM
RANDOM disappears from the
menu screen.
Tip:
Moving
1.
By pressing
to another Track
Press .
>
or
to
or
briefly during playback to go to
return to the beginning of the
current track.
Press . twice
previous
3.
In
during
another track and
the next track
2.
>
to
briefly
step back
to the
of audio CD, to go directly to any track,
enter the track number using the numbered but-
resumes
playback, the
random playback.
unit selects
A-B
1.
To
2.
Press A-B
track.
case
tons
Repeat
random
sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
repeat
a
again
at your chosen end
point.
The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Repeat
(0-9).
repeatedly.
Repeat Track/All/Off
You
1.
can
play
a
3.
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
repeat
menu screen.
icon appears.
2.
Press REPEAT to select
?
?
?
Track:
a
desired
repeat mode.
To
the current track
repeats
All: repeats all the tracks
Off(No display):
does not
on a
once
Track
a
3D surround effect that simulates
speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).
play repeatedly.
during Repeat
produce
multi-channel audio from two stereo
disc.
Note:
If you press >
3D Surround
playback,
the
1.
Press AUDIO
"3D SUR." appears
repeat playback cancels.
2.
1.
on
the
menu screen.
To return to normal
repeatedly
Search
during playback.
until
playback, press AUDIO
"3D SUR." disappears from
the
menu screen.
Press and hold .
or
> for about two seconds
during playback.
The
2.
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
to select
the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search
speed
and direction
are
indicated
on
the
menu
screen.
3.
To exit SEARCH mode, press PLAY.
35
Repeat Programmed
Programmed Playback
1.
1.
Insert
2.
contain 30 tracks.
can
program
?
?
Audio CD
2.
MUSIC
or
menu
Erasing
Press PROGRAM
again, then
the Program
to exit
the
mark will
E
1.
Edit mode.
AUDIO CD
1/12
0:00:00
Track1
Track5
2-Music2
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Clear All
7-Music7
Audio CD Menu
Video CD: Press PROGRAM while
The program
PROGRAM to exit the
Press PROGRAM in the
Program
stop mode
4.
Press CLEAR.
move
to the
"Program"
list.
playback
Erasing
1.
is
2.
Video CD with PBC, you must set PBC to Off on
the setup menu to use the programmed playback (See
the
Follow
List"
menu.
Repeat
to
erase
24).
page
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
Select
the "List", then press ENTER to
the selected track on the "Program" list.
a
place
Repeat
track
to
on
place
additional tracks
on
the list.
Press B.
Select the track you want to start
"Program" list.
Press PLAY
or
playing
To
resume
playback,
the
ENTER to start.
Playback begins
programmed the tracks.
the order in which you
Playback stops after all of the tracks
"Program"
on
list have
played
normal
playback
select
a
the
once.
from
track of CD
and then press PLAY.
on
programmed
(or MP3/WMA) list
in
erase
additional tracks
the list.
Complete Program
as
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
Use 3/4 to select "Clear All", then press ENTER.
The
on
to
Edit mode.
complete Program
for the disc will be erased.
a
"PBC"
the
List
Use v/V to select the track that you wish to
from the "Program" list.
on
Note:
36
:
playback,
3.
appears. Press
menu
Video CD
Program
Track
Press B to
PROGRAM Edit
Info
MP3/WMA Menu
stopped.
during Repeat
E
Program
Track5
once
1/12
List
E
Program
DISPLAY
6.
play repeatedly.
2.
PROGRAM Edit
5.
does not
Track from
a
enter
MUSIC
Track8
4.
Off(No display):
repeat playback cancels.
E
Note:
3.
repeat mode.
Note:
appears.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
On
desired
repeats the current track
All: repeats all the tracks on programmed list.
The
List
a
Track:
If you press >
0:52:07
disc.
repeat icon appears.
Press PROGRAM.
disappear
a
MP3/WMA Discs:
or
AUDIO CD
playing
Press REPEAT to select
?
disc.
a
Press REPEAT when
The
The program function enables you to store your
favorite tracks from any disc in the player memory. A
Tracks
Note:
The programs
removed.
are
also cleared when the disc is
Viewing
this DVD
Using
JPEG Disc
a
Player
you
Moving
view discs with JPEG
can
1.
Press .
or
>
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
during viewing a picture
or to the previous file.
once
advance to the next file
files.
JPEG
to another File
to
JPEG
Zoom
screen.
PHOTO
List
Use
zoom
(see
32
the
to
enlarge
page)
photo image.
Preview
To rotate
JPEG Folder 1
JPEG Folder 2
picture
>>>
JPEG Folder 3
Press v / V
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
JPEG Folder 7
during showing
clockwise
or
to rotate the
picture
a
counter clockwise.
JPEG Folder 8
To listen to MP3/WMA music
watching picture
JPEG
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Slide Show
1.
move
PLAY.
or
to
files while
on
listening
the
same
containing
to MP3/WMA
disc.
the two
types of file in
player.
2.
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
move
Playback
STOP is
to the next page.
display
a
PHOTO
photo
menu.
Operation
file.
icon then press ENTER.
starts. The playback will continue until
pressed.
Tip:
JPEG
Use vVbBto
display
Insert the disc
the
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Press DISC MENU to
can
music files recorded
and press ENTER.
highlight
3.
on
You
To listen to
highlight
the
(Slide Show)
then
press ENTER.
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Tip:
?
There
are
(Normal)
?
On
and
>
Speed options
(Slow).
: >>>
(Fast),
>>
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO
a
word
?
three Slide
on
Press
top of the
RETURN,
menu
is
JPEG disc
limited
?
highlighted.
compatibility
with this
player
is
follows:
as
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an on-
Depending
after several minutes, some of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
screen
information of file is hidden.
display
---
Still Picture
1.
2048
Press PAUSE/STEP
The
2.
JPEG
player
will
now
during
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 650.
press
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
Ensure that all the selected files have the
extensions when
?
into the CD
If the files have
rename
?
copying
".jpg"
layout.
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
by
shown
".jpg"
extension will not be
this DVD
as
player. Even though
JPEG image files in
Explorer.
37
5.1
Speaker Setup
This
to
chapter includes important reference information
help you set your DVD/VCR Combi receiver.
If you connected
following settings
for the built-in 5.1 channel
Press b / B to
1.
Press SETUP. The
2.
Use v / V to select the AUDIO
3.
move
setup
menu
speaker.
[0.3(1)m(ft)
appears.
Use v / V to select the
move
Speaker Setup option
then
to the third level. "Select" is
Speaker Setup
menu
→
AUDIO
Size
Volume
Distance
Test
Front L
Small
dB
0
m(ft)
0.6(2)
Off
Select
Move
Return
5.
Use b / B to select the desired
6.
Adjust options using
7.
Press RETURN to return to the
Speaker
Select
Enter
speaker.
v / V / b / B buttons.
menu screen.
selection
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
speaker settings
change the settings.
are
fixed, you
cannot
Volume
Press b / B to
adjust the output
speaker. (-6dB 6dB)
~
38
6.0(20)m(ft)]
level of the selected
signals
of each
the volume to match the volume of
Front Left
appears.
Speaker
the Distance of the selected
Press b / B to test the
rized in the
Press ENTER and 5.1
time.
Test
highlighted.
4.
-
adjust
same
then press
option
to the second level.
press B to
to your DVD/VCR Combi
how far the sound has to travel to reach your set listening point. This allows the sound from each speaker
to reach the listener at the
surround decoder.
B to
speakers
receiver, setting the Distance lets the speakers know
Speaker Setup
Make the
Distance
speaker. Adjust
test signals memo-
system.
(L)
Rear Left
→
(R)
Center
→
Rear
Front
Right (R)
Right (L) → SubWoofer.
→
a
This unit will
play
DVD-R/RW discs recorded
the DVD-Video format that have been
a
?
using
finalized using
Refer to the information in this
contacting
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
Insert
a
disc and close the
menu
appears
on
the TV
tray. The TITLE LIST
screen.
DVD-VR
When
Please
shipping
save
?
Press v / V to select
ENTER and
playback
Press TITLE to
move
a
track then press PLAY
or
starts.
to the list
menu.
played
in this
play-
er.
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of discs.
CPRM is
liquids
such
as
insecticide
the unit.
Do not leave rubber
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
on
Operation
the unit
copy protection system (with scramble system)
allowing the recording of 'copy once' broadcast
play
is CPRM
compatible,
be made
on
which
means
that you
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
Do not
or
strong solvents such
use
thinner,
as
these
as
might damage
alcohol, benzine,
the surface of the
that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
can
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
only
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
a
programs. CPRM stands for Content Protection for
Recordable Media.
can
volatile
unit.
What is 'CPRM'?
This
use
To clean the
Unfinalized DVD-R/RW discs cannot be
only
the
near
Cleaning
Note:
?
the unit
the exterior surfaces clean
Do not
spray
?
service technician.
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
3.
before
the Unit
Handling
Keeping
2.
a
chapter
DVD-recorder.
the Video
1.
Maintenance and Service
DVD VR format Disc
Playing
player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
use.
For details, please contact your nearest authorized
service center.
39
Playing
a
DivX Movie Disc
DivX disc
this DVD
Player
you
can
play
DivX disc.
?
Insert
1.
a
appears
disc and close the
on
the TV
tray. The MOVIE
menu
screen.
MOVIE
player
is limited
Available resolution size of the DivX file is under
720x576
?
with this
follows:
as
Using
compatibility
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
Movie Folder 3
If there is
impossible code to
file, it may be displayed as
display.
"
express in the DivX
mark on the
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
"
_
Movie Folder 8
?
If the number of the
frame is
screen
second, this unit may
normally.
per 1
Press v / V to select
2.
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
?
?
If you want to view a particular file, press
v / V to highlight a file and press ENTER
or
PLAY.
Tip:
Press DISC MENU to
?
On
is
highlighted.
or
audio is
*
GMC?
encoders, like DivX
There
are
called
1-point, 2-point,
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
a
CD with
move
video
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
MPEG4
?
interleaved, either
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
Press STOP to exit.
4.
operate
outputted.
press ENTER.
3.
30
If the video and audio structure of recorded
file is not
and
highlight
not
over
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
?
-
within 32
?
Bit
32
40
48kHz
(WMA)
rate: within 8
320kbps (MP3),
192kbps (WMA)
-
-
-
Additional Features-VCR part
On Screen
You may
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will
appear on the TV screen. If a recording is taking place
these On Screen
Displays
the
tape.
1.
Press CLK/CNT to
This feature informs you that there is a problem with
your DVD/VCR Combi receiver. These error
messages will appear
1.
will not be recorded onto
display options.
display.
repeatedly
The
tape
to
the TV
screen.
Press i.
Press 1
or 2
to select Dr.
VIDEO DOCTOR
the
cycle through
HEAD STATUS
counter and amount of
tape left will appear if there is
a
TAPE STATUS
NO. OF TIMER PROGRAMME
tape loaded.
NEXT TIMER PROGRAMME
PSET
R
REC
After 3 seconds the
Displays
majority of the On Screen
leaving only the clock or tape
ON
OFF
will clear
counter and the amount of
Press CLK/CNT
again
to
tape
left
remove
all
on
the
screen.
displays
2.
Pr-12
ACMS
NIC
fOSD
the TV
on
Press ENTER.
Press CLK/CNT
2.
(Self-Diagnosis)
OK
OPR
Press
3 or 4
to check
a
problem.
HEAD STATUS
from
O
screen.
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
Tape Counter Memory Stop
The
O
Insert
displayed on the
time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter can
display window instead of the
on
1.
the
be
Shows the number of timer
recording.
NEXT TIMER PROGRAMME
O
or
start
recording.
will display the
tape counter
in hours, minutes and seconds.
Press STOP when
playback
or
actual
recording
play
PR-01 26 10:00~11:00SP
Shows the current status of timer
Press CLEAR to set the counter to 0:00:00.
2.
tape with its protection tab in place
O2
Press CLK/CNT.
The
a
NO. OF TIMER PROGRAMME
tape.
Press PLAY
NOT RECORDABLE:
time
3.
recording.
Press i
is
complete.
Press BACKWARD.
The
tape will rewind and automatically stop when
the counter returns to 0:00:00.
41
Hi-Fi Stereo Sound
System
Your DVD/VCR Combi receiver will record and
back Hi-Fi stereo sound. In addition it has
NICAM
stereo
stereo sound decoder. This allows you
digital
to record and
a
play-
playback
the sound in several different
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio
system, video disc
another DVD/VCR Combi
or
receiver.
1.
Your DVD/VCR Combi receiver's NICAM
digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
particular type of
sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds:
bilingual
and
mono
sound. The
STEREO NICAM
Sound is
recorded
automatically
stereo and
mono
on
tracks of the video
the Hi-Fi
tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
the Hi-Fi tracks and the
on
track of the video
tape without any separa-
tion.
2.
Press AUDIO
repeatedly
until the desired audio
mode appears.
3.
The choice is STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary lan-
guage is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The
primary language
will be
output from both
channels when the audio
is MONO.
Please note that when
the
setting
adjusting
tracking
control Hi-Fi stereo sound may revert to MONO.
42
Additional Features
Last Scene
Memory
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the
If you load
memorized, the scene is
player.
a
disc that has the
automatically
scene
recalled.
Note:
This
player
does not memorize the
switch off the
before
player
disc if you
to play the disc.
scene
commencing
of
a
Screen Saver
The
appears when you leave the DVD
mode for about five minutes.
screen saver
player
in
Stop
Video Mode
Setting
With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That
means
Vertical
interpolation
or
De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
change
The
video mode number selected is
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
new
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
MODE1
or
video
MODE2
:
Description
The
source
material)
:
:
material of the DVD video
(film
material
is determined from disc information.
Suitable for
based material
MODE3
of each Video Mode
playing film based content or video
recorded by the progressive scan method.
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
setting only
works when the
Scan mode is set to "On"
on
the
setup
menu.
43
from DVD To VCR
Copying
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
sure
setup
to set
protected,
2.
3.
Scan" to "Off"
on
the
menu.
If the DVD you
1.
"Progressive
to copy is copy
you may not be able to copy the disc.
are
attempting
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape
Insert a blank VHS
videotape
from another video
Recording
recorder
With this video recorder you can make recordings
from an external source, such as copying from another
the DVD to VHS Tape
Press the REC/ITR button.
or a
camcorder.
Note
In the
following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to
1.
as
VCR A.
VCR A should be connected to the AUDIO L/R
(VCR
panel
IN
AV1)/VIDEO (VCR
IN
AV1) on the rear
(L(MONO)/R) /
of your unit or AUDIO IN
VIDEO IN on the front panel of your unit.
into the VCR deck.
Copy
video recorder
2.
Insert the recorded
tape into VCR A and
a
blank
tape into VCR B.
The DVD will go into Play mode and the
DVD/VCR Combi receiver will go into Record
mode.
If the DVD disc
to press the
3.
appears, you may need
button manually to begin
menu
Play
Press AV until the socket you wish to record from
is displayed. (VCR B)
AV 1 for
recording from AUDIO L/R (VCR IN
AV1)/ VIDEO (VCR IN AV1) terminals on the
copying.
of your unit.
AV 2 for recording from AUDIO IN
Note:
VIDEO IN terminals
If you press the REC/ITR button, be sure this
DVD/VCR Combi receiver in DVD mode.
4.
To start
the Copy Process
When the DVD is finished
end the copy.
press the REC/ITR
VCR A.
on
VCR B
Stop
playing,
press STOP to
You must
stop the Copy process manually
when the DVD movie ends, or the unit may
replay
44
on
(L(MONO)/R)/
the front of your unit.
recording,
and PLAY
4.
on
rear
and record
over
and
over
again.
5.
When you want to finish
on both video recorders.
copying,
press the STOP
Presetting
You
can
ing,
make
preset
sure
the Radio Stations
50 stations for FM and AM. Before tun-
Preset radio stations in the DVD/VCR Combi receiver
that you have turned down the
memory first
volume.
1.
(see "Presetting
radio stations"
the
on
left).
Press FM/AM
the remote control
on
front
on
to the Radio
Listening
panel until the frequency
the display and TV screen.
or on
the
1.
band appears
Press FM/AM
on
the remote control
front
on
panel until the frequency
the display and TV screen.
or on
the
band appears
The last received station is tuned in.
2.
Press 3/4
on
the remote control
repeatedly
to
select the preset station you want.
Each time you press the button, the DVD/VCR Combi
RADIO
AM
receiver tunes in
01
522kHZ
3.
OK, CLEAR
,
one
preset station
at
a
time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on
the remote control repeatedly.
-
To Clear the Stored Radio
Stations
RADIO
FM
1.
06
on
OK, CLEAR
Press 3/4
2.
the remote control to select your
desired radio channel.
3.
Press FM/AM
front
4.
panel
the remote control
on
panel until the frequency
the display and TV screen.
2
and
2
seconds,
automatically.
(3/4)
on
the front
RADIO
panel
FM
or
the
Operation
band appears
the remote control for
station is searched for
on
a
06
108. 00MHZ
OK, CLEAR
,
Press 3/4
the remote control to select your
desired station.
on
06
87. 50MHZ
RADIO
,
AM
OK, CLEAR
,
5.
or on
the
2.
RADIO
FM
or on
to select the desired band.
hold down 1 and
or
the remote control
on
Hold down PRESET
1
on
front
108. 00MHZ
,
Press FM/AM
Press MEMORY
on
10
522kHZ
OK, CLEAR
the remote control.
3.
Press CLEAR the remote control to clear the
stored radio station.
6.
Repeat steps
2 to 5 to store other stations.
RADIO
FM
10
98. 00MHZ
,
OK, CLEAR
Note
While record
record pause mode, the CLEAR
function may not be operated.
or
45
Tuning
1.
into
a
Press FM/AM
Station
Manually
the remote control
on
front
on
2.
panel until the frequency
the display and TV screen.
Press FM/AM
front
3.
panel
band appears
the remote control
on
the
or on
the
or on
to select the desired band.
Press PRESET
(3/4)
on
the front
panel
or
press 1 and 2 on the remote control to tune
in the desired station.
Tuning
into
a
Station
Hold down PRESET
down 1 and 2
seconds, and
a
on
(3/4)
on
Automatically
the front
panel
the remote control for 1
station is searched for
or
or
hold
2
automatically.
Note
The search may not
weak signal.
stop
at
a
station with
a
very
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
answer
the
appear in
46
telephone,
the display.
example,
to
MUTING and MUTE indicator
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Code
ET
Country
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
AR
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
Japan
JP
Paraguay
Philippines
PH
United States
US
Denmark
DK
Ke nya
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Republic
AF
Country
Code
Country
Ethiopia
Fiji
SG
SK
47
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
service.
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
Plug the power
securely.
cord into the wall outlet
The power is on, but
the DVD/VCR Combi
No disc is inserted.
Insert
tape. (Check that the
No
disc
tape is inserted.
picture.
disc
or
tape indicator in the display
or
window is
lit.)
The TV is not set to receive DVD/VCR
Select the
Combi receiver
on
appropriate video input
so the picture from the
receiver does not work.
No
a
signal output.
the TV
mode
DVD/VCR Combi receiver appears
the TV screen.
TV/VCR mode for DVD/VCR Combi
Press the TV/VCR button
receiver is set to TV.
control
TV
on
the remote
on
repeatedly to choose VCR mode.
indicator disappears in the display
window.
Connect the video cable
The video cable is not connected
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the audio
equipment
on
input
mode
on
the audio
cable is not set to receive DVD/VCR
Combi receiver signal output.
you can listen to the sound from
the DVD/VCR Combi receiver.
The audio cables
Connect the audio cables
are
not connected
receiver
the TV.
so
securely.
securely.
The power of the equipment connected
with the audio cables is turned off.
Turn
The
Set the
digital audio output
wrong position.
The
playback picture
is
poor.
The DVD/VCR Combi
receiver does not start
playback.
The disc is
Tape
heads
Tape
is
a
is set to the
equipment
the audio cables.
digital audio output to the
correct position, then turn on the DVD/VCR
Combi receiver again by
pressing POWER.
recorded
or was
on
Use v/V for manual
another VCR.
adjustment while
No disc is inserted.
No tape is inserted.
Insert
An
unplayable
a
disc
Insert
disc is inserted.
placed upside
The disc is not
or
a
guide.
(Check the disc
system, and Regional code.)
Place the disc
dirty.
Clean the disc.
The
level is set.
Cancel the
Cleaning
Whenever
video cassette is inserted into
on
playback
the disc
side down.
tray correctly
guide.
The disc is
rating
display
disc.
Place the disc with the
down.
within the
placed
Video Head
tape. (Check that the
playable
inside the
Rating
tracking
tape is playing.
disc or tape indicator in the
window is lit.)
type, color
The disc is
connected with
Clean video heads.
dirty.
rental
the
Clean the disc.
dirty.
are
on
Rating
function
or
change
the
level.
ejected from your VCR the video head is automatically cleaned.
This should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become
blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old
or damaged tapes might.
48
a
or
Cause
Symptom
This remote control
uses
the
The remote control is not
remote
same
buttons for VCR and
DVD functions
(ex. PLAY).
Correction
sensor
pointed
at the
Point the remote control at the remote
of the DVD/VCR Combi receiver.
of the DVD/VCR Combi receiver.
sensor
The remote control is too far from the
DVD/VCR Combi receiver.
Operate
(7 m).
There is
Remove the obstacle.
an
obstacle in the
path
of the remote
the remote control within 23 ft
control and the DVD/VCR Combi receiver.
The batteries in the remote control
the batteries with
Replace
are
new ones.
exhausted.
This remote control
buttons for VCR and DVD functions
VCR, first press the VCR
button. When using a DVD, first press
(ex. PLAY).
the CD/DVD button.
The DVD/VCR Combi receiver is in the
Press PAUSE/STEP
during recording.
RECORD PAUSE MODE.
recording.
The
The
The
or
tape does
tape will
not
run
not rewind
fast-forward.
The
the
uses
When
same
tape is already fully rewound
using
a
resume
fast-
Check the
con-
Set the TV to the Video channel
or
tape.
If
you're using only
the RF cable for
does not appear while
the tape is running.
nection.
(see
Noise appears
visual search.
This is normal.
Turn camcorder
during
p.
16).
on
and
operate
properly.
Noise appears during
normal playback.
The automatic
Breaks
There is
noticeable
in Hi-Fi soundtrack.
Recording
to
forwarded.
playback picture
are
(X)
The automatic
no
The
started.
mode is
tape loaded,
has had its record
cannot be
mode is
tracking
tracking
safety
or
the
engaged.
engaged.
Try
manual
tracking (see
p.
26).
tape loaded
Try
manual
tracking (see
p.
26).
tab removed.
(another VCR, camcorder)
properly connected.
source
not been
has
Insert
a
cover
the hole where the tab
tape,
or
using
adhesive
tape,
was
removed.
Tape-to-tape editing
not possible.
Timer
recording
is
won't
work.
The clock/or the timer have been set
Confirm that the camcorder is
incorrectly.
connected.
The timer is not
Re-perform
tings.
engaged.
properly
the clock and/or timer set-
Press POWER and confirm that the
The loaded
tape
has had its record
safety
tab removed.
Audio mode is not set
properly.
timer indicator is
displayed
DVD/VCR Combi receiver's
Insert
a
insert
a
on
the
Display.
pate with adhesive tape, or
tape with the record safety tab
intact.
Select "STEREO"
No Hi-Fi sound.
ing
AUDIO
on
by repeatedly
pressthe remote control.
Moisture Condensation
Moisture condensation
?
When the DVD/VCR Combi receiver is moved from
cold
?
place
Under
to
a warm
extremely
In locations where moisture condensation may
can occur:
a
?
the DVD/VCR Combi receiver
plugged
into
an
AC power outlet with POWER On.
This will help prevent condensation.
place.
humid conditions.
Keep
occur:
?
When condensation has occurred, wait a few hours
for the DVD/VCR Combi receiver to dry before
using
it.
49
Specification
General
Power
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Refer to main label
Refer to main label
Timer
430X81X360mm(wxhxd)
5.8 kg (17.6 lbs)
5˚C to 40˚C (41˚F to 104˚F)
24-hour display type
Operating humidity
5%to90%
DVD Section
Laser
Semiconductor laser,
PAL/NTSC
Signal system
Frequency response
wavelength
650
nm
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto20kHz
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 65 dB
Harmonic distortion
Less than 1.0%
Dynamic
More than 60 dB
range
(analog
out connectors
only)
(DVD, CD)
Outputs
S-VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin
(C) 0.3 V (p-p) 75 ohms
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
x
1
VCR Section
Head
6 heads helical
system
Television system
Recording
scan
PAL/SECAM colour
format
azimuth
system
system
PAL/MESECAM
RF OUT
G
RF Modulator
UHF 22
Tape speed
PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)
68
-
(Adjustable)
NTSC
Maximum
recording
time
Rewind time
Input
level
Output level
Signal-to-noise
(Playback only); 35.35 mm/s (SP), 16.67
11.12 mm/s (EP)
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
mm/s
AUDIO: -6.0 dBm, more than 47 kohms
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
ratio
VIDEO: More than 43 dB
AUDIO: More than 72 dB
More than 42
Dynamic
range
(Hi-Fi)
dB (Mono)
AUDIO: More than 85 dB
Tuner Section
Tuning
FM: 87.5
range
AM: 522
Intermediate
frequency
-
-
108.0 MHz
1611 kHz
FM: 10.7 MHz
AM: 450 kHz
Amplifier Section
Stereo mode
Surround mode
90W+90W(8ohmat1kHz,THD10%)
Front: 90W + 90W (THD 10%)
Centre: 90W
Surround: 90W
+
Subwoofer: 150W
50
90W
(4
ohm at 1 kHz, THD 10%)
ohm at 30 Hz, THD 10%)
(8
(LP),
Speaker
Satellite
Section
(LHS-CX643T)
Type
Impedance
Frequency Response
2
Sound Pressure Level
85 dB/W
Rated
90W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
Centre
5
Way
Speaker
8Ω
120
-
20,000 Hz
(1m)
180W
H
x
x
326x1500x326mm
D)
13
kg
speaker (LHS-CX643C)
Type
Impedance
Frequency Response
2
Sound Pressure Level
85 dB/W
Rated
90W
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
Passive Subwoofer
5
Way
Speaker
8Ω
120
-
20,000 Hz
180 W
H
x
x
600x152x154mm
D)
2.6
kg
(LHS-CX643W)
1
Way
1
Type
Impedance
Frequency Response
4Ω
Sound Pressure Level
82 dB/W
Rated
150W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
(1m)
40
Speaker
1,500 Hz
-
(1m)
300W
x
H
x
350x482x350mm
D)
9.6
kg
Accessories:
AM/FM aerial,
Design
and
Speaker
cable
specifications
are
Manufactured under license from
Dolby
6, RCA cable, Remote control, Batteries (AAA)
x
subject
Dolby
to
change
Laboratories.
x
2
without notice.
"Dolby",
"Pro
Logic",
and the double-D
symbol
are
trademarks of
Laboratories.
"DTS" and "DTS
Digital
Out"
are
trademarks of
Digital
Theater
Systems,
Inc.
51
P/N: 3834RH0086F
Printed in Korea
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement