LG LH-CX640X Owner's manual

LG LH-CX640X Owner's manual
LH-CX640X NA3RMLS-ENG
DVD/VCR COMBI RECEIVER
Combi Receiver
System
OWNER'S MANUAL
MODEL: LH-CX640
(Main Unit: LH-CX640X
Speakers: LHS-CX640T,
LHS-CX640C
LHS-CX640W
CD-R/RW
PAL
Before
please
The
up, operating or repairing this
read this instruction booklet carefully and
connecting
working life of
date of purchase.
this
product
product,
completely.
is 7 years since the
CAUTION
Warning:
To reduce the risk of electric
shock, do
of this
not
remove
There
product.
iceable
the
are no user-serv-
parts inside. Refer servicing
qualified
service
Warning:
To reduce the risk of fire
electric
uct to
or
back
cover or
personnel.
shock, do
dripping
to
not expose this
or
prod-
splashing water, rain,
not place objects filled
as vases, on the prod-
or
moisture. Do
with water such
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE.
IN CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
uct.
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
______________________________
______________________________
Date of Purchase_________________________
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Warning:
To
prevent direct exposure
to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Never stare
laser beam.
Warning:
directly
Caution: Do not install this
confined space such
similar unit.
Notes
on
as a
into the
product
book
in
a
case or
Copyrights:
It is forbidden by law to copy, broadcast, show, broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
2
Contents
GeneralFeatures.......................31
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................8
RemoteControl.........................9
RearPanel............................10
InstallationandSetup.
.
.
.
.
.
.
.
.
.11
.
TV&SetTopBox
.11-12
(or another VCR Connections)
Accessory Audio/Video (A/V) Connections to
.
.
.
.
.
.
.
.
.
DVD/VCRCombireceiver................13
RadioAerialConnections................13
SpeakerSystemConnection..............14
SpeakerPositioning.....................15
Mini Glossary for Audio Stream &
Surroundmode.........................16
SoundMode...........................16
.17-21
BeforeOperation-VCRpart.
.17
TuninginavideochannelonyourTV.
.17
Using your receiver for the very first time
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Howtousethemainmenu..............19
.19
Tuning in TV stations Automatically
.
.
.
.
.
.
.21
TuninginTVstationsManually.
.21
ChangingtheorderofTVstations.
DeletingTVstations...................21
.22-26
BeforeOperation-DVDpart.
On-ScreenDisplay......................22
InitialSettings.......................23-26
GeneralOperation....................23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................23
MenuLanguage....................23
DiscAudio/Subtitle/Menu.
.23
DISPLAY...........................24
.
.
.
.
.
.
.
.
.
AUDIO.............................24
5.1SpeakerSetup..................24
.24
DynamicRangeControl(DRC).
.
.
.
.
.
AutoPlay..........................25
DivX(R)VOD.......................25
LOCK(ParentalControl)................26
Rating............................26
.26
Password(SecurityCode).
CountryCode......................26
.
.
.
.
.
.
.
.
.
.
Operation....................27
Playingatape.......................27-31
.27
CM(CommercialMessage)Skip
.27
OPR (Optimum Picture Response)
.28
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.28
.30
IfTimerrecordeventsOverlap
.30
Change (Deleting) the Timer Programme
.31-32
PlayingaDVDorVideoCD.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Search.............................31
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.
.
.
.
.
.
.
.
.
.
.
.
.31
.32
SlowMotion.........................32
Random............................32
RepeatA-B..........................32
Repeat.............................32
3DSurround.........................32
TimeSearch.........................32
Zoom..............................33
MarkerSearch.......................33
SpecialDVDFeatures...................33
TitleMenu..........................33
DiscMenu..........................33
CameraAngle.......................33
.33
ChangingtheAudioLanguage
.
.
.
.
.
.
.
.
.
.
Subtitles............................33
DVDAudioDiscs.........................34
.35
PlayinganAudioCDorMP3/WMADisc
AudioCDandMP3/WMADiscFeatures
.36
Pause..............................36
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................36
RepeatTrack/All/Off...................36
Search.............................36
Random............................36
RepeatA-B..........................36
3DSurround.........................36
ProgrammedPlayback.....................37
.37
RepeatProgrammedTracks.
.37
ErasingaTrackfromProgramList
.37
Erasing the Complete Program List
ViewingaJPEGDisc......................38
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................38
StillPicture..........................38
MovingtoanotherFile.................38
Zoom..............................38
Torotatepicture......................38
To listen to MP3/WMA music watching picture
.38
SpeakerSetup.........................39
.40
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................40
PlayingaDivXMovieDisc................41
Additional Features-VCR
part
.
.
.
.
.
.
.
.
.
.42-43
.
OnScreenDisplay....................42
TapeCounterMemoryStop.............42
.42
Friendly User Guide (Video Doctor)
Hi-FiStereoSoundSystem.............43
.43
WideScreenCompatibility16:9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AdditionalFeatures.....................44
LastSceneMemory...................44
ScreenSaver........................44
VideoModeSetting...................44
CopyingfromDVDtoVCR................45
.45
Recording from another video recorder
RadioOperation........................45
.46
PresettingtheRadioStations
ListeningtotheRadio..................46
.
.
.
.
ToCleartheStoredRadioStations
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.46
.47
.47
TuningintoaStationManually
Tuning into a Station Automatically
Reference....................48
.
.
.
.
Vocal.............................24
OTHERS...........................25
PBC.............................25
.
.
.
TVAspect.........................24
DisplayMode......................24
ProgressiveScan...................24
TVOutputSelect....................24
.
.
.
SettingtheclockManually................18
Tosetthecoloursystem.................18
.
MovingtoanotherTITLE...............31
.31
Moving to another CHAPTER/TRACK
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LanguageCodes.......................48
CountryCodes.........................48
Troubleshooting.....................49-50
Specification........................51-52
.
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV display during operation and indicates that the function explained in this
owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
DVD
video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
Notes
on
Discs
location.
Handling
Used in this Manual
Symbol
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
of
electric shock.
The exclamation
point alerts you to the presence of important operating and maintenance
/ servicing instructions.
Indicates hazards
unit itself
or
likely
to cause harm to the
other material
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
making
one
to the disc
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
of the
following symbols
represented by the sym-
bol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
CD
Audio CDs
MP3
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
MP3 Discs
spray intended for older
WMA
WMA Discs
JPEG
JPEG Discs
Setting
DivX Discs
You must select one of your output
VCR) to view on the TV screen.
DivX
Do not
use
the
vinyl
records.
Output Source
sources
(DVD
or
If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
?
until DVD indicator on the front panel lights and output
source of DVD deck is viewed on the TV screen.
If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
until VCR indicator on the front panel lights and output
?
source
4
of VCR deck is viewed
on
the TV
screen.
Types
of
Playable
Discs
Regional
code
This DVD
player is designed and manufactured for playback of region "5" encoded DVD
software. This unit can play only DVD discs
DVD
(8cm/12cmdisc)
labeled "5"
DVD audio discs
(8cm/12cmdisc)
Notes
Video CD
(VCD)
(8cm/12cmdisc)
?
on
or
"ALL".
Regional
Codes
Most DVD discs have
numbers in it
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
al code or the disc cannot play.
Audio CD
(8cm/12cmdisc)
?
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and
5
player's region-
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
CD-R / CD-RW that contains audio titles, MP3, WMA,
and/or JPEG files.
Notes:
?
Depending
on
the conditions of the
ment or the CD-R/RW
(or
recording equip-
DVD -R, DVD +R,
DVD
-
RW, DVD +RW) disc itself, some CD-R/RW (or
DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be
?
?
played
on
the unit.
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
(the
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
Do not
use
shaped
or
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available or other functions may be added.
Manufactured under license from
Dolby Laboratories.
double-D symbol are
Logic", and the
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide patents issued and pending. "DTS" and
"DTS Digital Surround" are registered trademarks of
Digital
Digital
Theater
Theater
Systems,
Systems,
Inc.
Inc.
Copyright 1996, 2003
All rights reserved.
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
are
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
are
only
two standards for
re-writable media, meaning the DVD content can be
erased and re-recorded. Single-sided discs can hold
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
sided recordable
(Video CD)
with
quality
stereo sound.
MPEG
MPEG is
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
assigned
easily.
a
reference number
film
or one
interview in
a
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A type of
developed by Microsoft Corp.
coding
/
decoding
Expert Group. JPEG is a compressed
that allows you to save images with no limit
Joint Pictures
file format
the number of colors.
DivX
chapter
in
a
is
may not be recorded.
audio discs
only)
or accompanying
feature
con-
tent or additional feature content, or music
album.Each group is assigned a group reference
number enabling you to locate it easily.
Scene
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Track
DivX is the
name
which is based
on
of
a
the
revolutionary
new
using
new
video codec
MPEG-4
standard for video.You will be able
movies
series. Each
as a scene
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
On
JPEG
you to locate it
enabling
Chapter (DVD video discs only)
A chapter is a segment of a title such
The main audio content
MP3 is
on
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
Group (DVD
MP3
audio
Title
and cast interviews could be title 3. Each title is
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
CDs.
as
discs.
VCD
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
compression
to play DivX
this DVD/CD/VCR receiver.
A distinct element of audiovisual information, such
as
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow one
track of video
of audio.
6
(with multiple angles)
and several tracks
Front Panel
EJECT(Z)
Ejects
OPEN/CLOSE
Opens
or
the tape in the VCR deck.
PAUSE/STEP(X/C)
(Z)
Pause
closes the disc tray.
playback
Press
of
tape
a
for
repeatedly
disc in the DVD or
VCR deck temporarily.
or a
frame-by-frame playback.
Remote Sensor
STOP
Point the DVD/VCR Combi receiver
remote control here.
Stops playback
of
a
disc
PLAY
Disc
Tray (DVD deck)
Insert
a
To
play
back
a
recorded tape
disc here.
REC/ITR
or
or
(x)
tape.
(B)
disc.
(z)
To record
activate Instant
Cassette
TUNER FM/AM
To
change
between AM
Insert
a
normally or to
Timer Recording.
Compartment
(VCR deck)
video cassette here.
and FM bands.
Display
window
DVD/VCR
(output select)
Select one of your output sources to view
on the TV screen between DVD and VCR.
PROG./PRESET
(3/4)
To scan up or down through memorized channels or
to control tracking during playing back a tape (VCR mode).
To tune in the desired station (Radio Mode).
INPUT SELECT
Select the VCR deck's
VIDEO/AUDIO
source
(Tuner, A1,
A2
or
AV3)
(Left/Right)
Connect the audio/video output of
TV/Monitor, Another VCR).
an
external
source
system,
Reverse SKIP/SCAN
DVD: Go to
(S/Q)
previous
of current chapter/track or to
chapter/track. Press and hold for two seconds for a fast reverse search.
VCR: Rewinds the tape during the STOP mode or for fast reverse picture search.
beginning
Forward SKIP/SCAN
DVD: Go to NEXT
(R/T)
Press and hold for two seconds for a fast
forward search.
VCR: Advances the tape during the STOP mode or for fast
forward picture search.
chapter/track.
VOLUME Control
STANDBY/ON indicator
Switches the DVD/CD/VCR receiver ON and OFF.
Turn the knob clockwise to increase volume,
counterclockwise to decrease the volume.
7
Display
Indicates current
A disc is loaded in the DVD deck.
audio stream.
loaded in the DVD
WMA disc inserted
(Lights
when
a
Window
disc is
deck.)
DVD/VCR Combi receiver is in VCR timer
mode
Indicates the unit is
radio mode.
or a
VCR timer
recording
is
recording
programmed.
DVD to VCR copy is in progress.
DVD/VCR Combi receiver is
Indicates current
surround mode.
Recording
a
tape.
Indicates the unit is
playing
back
a
tape
recorded in Hi-Fi.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
RADIO
VCD
ST
II PROG
PROLOGIC
CHP/TRK
Hi-Fi
DVD
MP3 TV
RPTALLAB
Total
Indicates current
track number
chapter,
or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights
up when
a
JPEG disc inserted.
8
stereo broadcast is
being
received in radio mode.
playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Remote Control
POWER
Switches DVD/VCR Combi receiver ON and
OFF.
0-9 numerical buttons
Selects numbered options in a menu.
PROGRAM
Accesses
or removes
Program
track number
on
the
program menu or a mark
MARKER SEARCH
on
the
a
-
-
EJECT
OPEN/CLOSE
POWER
CD/DVD
FM/AM
VCR
AUX
AV
display.
PROGRAM
CLEAR
SOUND MODE
AUDIO
Select programme of VCR or Tuner
Adjusts manually the tape's picture
PR/TRK/PRESET
(b/B):
SET UP/ i
To tune in the desired radio station.
normally
or
(z)
(.)
DVD: Search
backward*/go to beginning
of current chapter or track or go to
previous chapter or track.
VCR: Rewinds the tape in STOP mode
or for fast reverse picture search.
*Press and hold button for about two
seconds.
FORWARD (>)
DVD: Search
TUNING-
forward*/go to next
chapter or track.
-
ENTER
DISC MENU
RETURN
PR/TRK/PRESET
REC/ITR BACKWARD
frequency into
Accesses
menu on a
VOLUME
DVD disc.
(+/-)
point during playback.
STOP
PAUSE/STEP
MARKER SEARCH
menu.
S-TITLE
Selects a subtitle language.
MUTE
PLAY
Momentarily silence the speaker of the
REPEAT
TV/VCR
Stops playback.
CM SKIP
DVD/VCR Combi receiver.
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
ZOOM
SPEED
TITLE
ZOOM
(X)
Enlarges
DVD video
image.
TITLE
Displays the disc's Title
RANDOM
menu, if
available.
REPEAT A-B/SPEED/REPEAT
PLAY (G)
Starts playback.
ANGLE
angle
radio stations
Displays functions on the TV screen.
Acknowledges menu selection.
Displays
FORWARD
REPEATA-B
camera
a
SEARCH
ANGLE
DVD
Enter
Marks any
MUTE
a
menu.
MARKER
S-TITLE
Selects
setup
Adjusts speaker volume.
SEARCH
playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
remove
DISC MENU
MARKER
Pause
(CD).
the tuner.
-
VCR: Advances the tape in STOP mode
or for fast forward picture search.
*Press and hold button for about two
seconds.
STOP (A)
PAUSE/STEP
SET UP/ i
Access or
TUNING+
OK
MEMORY
Recording.
BACKWARD
AV3).
SOUND MODE
Selects sound mode between BYPASS,
PRO LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
AUDIO
Selects an audio language (DVD) or an
-
activates Instant
Timer
or
source
OK/MEMORY/ENTER
RETURN
Records
AV2
audio channel
onscreen.
REC/ITR
AV
Selects the VCR deck's
(Tuner, AV1,
PR/TRK/PRESET(v/V):
menu.
Introducin
listening choice. (FM and AM bands)
digital signal from
DIGITAL AUDIO IN (OPTICAL)
DISPLAY, CLK/CNT
Removes the setup
to view on the TV screen.
For selecting the
tuner memory.
TUNING
or
FM/AM Tuner select button
Select the DVD/VCR Combi receiver's tuner
the
AUX
menu.
Switches among the clock, tape counter
and tape remaining modes on the display.
b/B/v/V (left/right/up/down)
Selects an option in the menu.
in the VCR deck.
CD/DVD/VCR select buttons
Select the output source (CD/DVD
as
Press to clear preset stations from the
Accesses On-Screen
Ejects the tape
VCR)
menu.
CLEAR
Removes
OPEN/CLOSE, EJECT (Z)
Opens and closes the disc tray.
-
-
-
if
Repeat chapter, track, title, all.
Repeats sequence.
Selects recording speed.
available.
CM SKIP
Fast forwards
Play
picture search through 30
seconds of recording.
RANDOM
tracks in random order.
Note
This remote control
To
use
To
use
use
the
same
buttons for VCR and DVD functions
(ex. PLAY).
VCR, first press the VCR button.
the DVD, first press the CD/DVD button.
the
9
Rear Panel
AC Power Cord
Plug
ANT.IN
into the power
source.
Connect the aerial
EURO AV2
(VCR
IN+OUT/DVD
Connect to Set
Top
jack.
RF. OUT
OUT)
Box
this
using
Connect to
or
TV with RF cable.
a
FM ANTENNA CONNECTOR
another video recorder.
Connect the FM antenna to this
terminal.
66
6
4
EURO AV1 AUDIO/VIDEO
(VCR
Connect to your TV set
or
IN+OUT/DVD
6
6
OUT)
another video recorder.
S-VIDEO OUT
Connect to
a
(DVD OUT)
S-Video Input on TV.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS
Connect the six
supplied speakers
to these terminals.
DIGITAL AUDIO IN
(OPTICAL)
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner
Electrostatic
discharge
Remote Control
of the
pins
may
cause
jacks
the
panel.
permanent damage to the
on
rear
Remote control
Operation Range
Point the remote control at the remote
press the buttons.
Distance: About 6m
sensor
unit.
and
battery
Detach the
battery
cover on
the
rear
of the remote control, and insert two
(20ft)
from the front of the
AAA AAA
R03
remote sensor
Angle:
installation
(size AAA) batteries
aligned correctly.
with
and
About 30° in each direction of the front of the
remote sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Installation and
TV & Set
Top
Box
(or
Setup
another VCR
Rear of Set
Box
Top
(or
Connections)
another
VCR)
VIDEO
OUTPUT
AUDIO OUTPUT
A
D
6
R
66
4
6
InstaliodSeup
6
S
Rear of TV
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
E
Pb
Y
Y(G)
?
Make
on
AUDIO LOUT
Pr(R)
following connections, depending
capabilities of your existing equipment.
Tips
Depending
?
L
of the
one
the
Pb(B)
Pr
your TV and other equipment you
wish to connect, there are various ways you could
AERIAL
AUDIO ROUT
1.
door aerial to ANT.IN
DVD/VCR Combi receiver.
2.
Connect the
Receiver
supplied RF cable (R) from the
jack on the rear panel of DVD+VCR
to your television's Aerial Input.
S-Video connection
make the best connections.
Connect the S-VIDEO OUT
Make
the DVD/VCR Combi receiver is connect-
sure
directly
to the TV. Select the correct AV
input
on
could be distorted
by
the copy
the S-Video cable
jack
on
the TV
(S).
Notes
protection
sys-
tem.
Basic connections
using
the DVD/VCR
on
Do not connect your DVD/VCR Combi receiver to
TV via your DVD/VCR Combi receiver. The DVD
image
jack
Combi receiver to the S-VIDEO IN
your TV.
1.
(A) from your indoor/ outjack on the rear panel of
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
ed
?
(RF)
Connect the aerial cable
RF. OUT
Caution
?
VIDEO
OUT
Basic connections
the connections described below.
?
T
R
on
connect the DVD/VCR Combi receiver. Use one of
SO
VIDEO
INPUT
AUDIO INPUT
?
The
signal
of S-VIDEO OUT
jack
will
when the function mode is selected to CD/DVD.
?
When you connect the DVD/VCR Combi receiver to
your TV, be sure to turn off the power and unplug
both units from the wall outlet before
(AV)
output only
making
any
connections.
Connect the EURO AV1 AUDIO/VIDEO
on
the
panel of the DVD/VCR Combi receiver to the
RCA input jacks on the TV using a RCA-SCART
lead (E).
rear
2.
You
connect such a Set
(or another
VCR) to the DVD/VCR Combi receiver using a
RCA-SCART lead (D).
can
Top
Box
11
Progressive
Scan
(ColorStream
pro)
connection
Connect the EURO AV1 AUDIO/VIDEO socket
on
the
Rear of TV
DVD/VCR Combi receiver to the COMPONENT
VIDEO
INPUT(Y
Pb
Pr) jacks
on
the TV
using
the
COMPONENT VIDEO /
PROGRESSIVE SCAN INPUT
SCART to RCA cable.
Y
If your television is
high-definition or "digital
ready" television, you may take advantage of the
DVD/VCR Combi receiver progressive scan output
for the highest video resolution possible.
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD/VCR Combi
Pb
AUDIO INPUT
Pr
L
S-VIDEO
VIDEO
INPUT
INPUT
R
AERIAL
a
Y(G)
Pb(B)
Pr(R)
receiver.
Notes:
?
Set the
menu
?
Progressive Mode to "On" on the setup
for progressive signal, see page 24.
Once the
setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Scan to On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
tray. See that "NO DISC" is displayed
on
the
display
window.
2)
Rear of DVD/VCR Combi receiver
Press STOP and hold it for five seconds before
output will be restored to the
standard setting and a picture will once again be
releasing
visible
?
it. The video
on a
Progressive
conventional
scan
video connections
12
analog
TV
or
monitor.
does not work with the
analog
(yellow VIDEO OUT jack).
Caution:
You must set the TV Output Select option on the
setup menu to use Y Pb Pr or RGB signal from the
EURO AV1 AUDIO/VIDEO socket.
(See "TV Output Select" on page 24.)
Accessory Audio/Video (A/V) Connections
to DVD/VCR Combi
receiver
Connect the AV 3
jacks on the DVD/VCR Combi receiver
component, using the optional audio/video cables.
If the
auxiliary devices (e.g. DVD)
input jack of the DVD/VCR Combi
are
equipped
to the audio/video out
with OPTICAL OUT
jack,
jacks
on
your accessory
connect them to to the
corresponding
receiver.
DVD
Player (or Digital Device, etc)
InstaliodSeup
OPTICAL
OUT
66
4
666
Radio Aerial Connections
Connect the
?
?
supplied FM/AM
Connect the AM loop aerial
aerial for
listening
to the radio.
to the AM aerial connector.
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
(supplied)
Loop aerial (supplied)
6
66
4
6
6
Notes
loop aerial away from the DVD/VCR Combi receiver and other components.
To prevent noise
?
fully extend the FM wire aerial.
After connecting the FM wire aerial, keep it
?
Be
sure
pickup, keep the
AM
?
to
as
horizontal
as
possible.
13
Speaker System
Connection
Connect the
the
speakers using
To obtain the best
possible
supplied speaker
surround sound,
cords.
adjust
the
Front
Speaker
(Right)
speaker parameters; distance, level,
Centre
Front
Speaker
(Left)
Speaker
6
etc..
66
4
6
6
Rear
Speaker
(Right Surround)
Rear
Speaker
(Left Surround)
Subwoofer
Notes
?
Be
sure
to match the
speaker
cable to the
appropriate
terminal
the components:
on
+
to
+
and
--
to
--.
If the cables
are
reversed, the sound will be distorted and will lack base.
?
If you
front
use
speakers
with low maximum
input rating, adjust the volume carefully
to avoid excessive
output
on
the
speakers.
?
Do not
remove
the front
of
cover
supplied speaker.
About Ferrite Core
Be
1
to attach the ferrite core to the
sure
(for connecting
This ferrite
to this
core can
cables
unit).
a
reduce noises.
How to attach the ferrite
1. Push the
speaker
core
stopper [a] of the ferrite
a
2
core
to open.
A
B
2. Wind the Subwoofer cable three times on the ferrite
6
core
(A).
ferrite
Wind the Subwoofer cable
core
once on
straight
on
the ferrite
core
46
66
the
(B).
3. Pass the others
6
(B).
4. Close the ferrite core until it clicks.
Make the
as
3
A
Notes
?
Take
care
ferrite
14
not to
cores.
pinch the speaker cables between the
B
length here
short as possible.
Speaker Positioning
In the
of normal
case
position
the 6
use
speakers (2
front
centre
speakers,
speaker,
2 rear
speakers
and
subwoofer).
If you want to
a
?
?
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
subwoofer.
Front
speakers
According to your listening position set up
interval between speakers to 45 degree.
the
speakers
for
equal
distance. And
by hearing position
set up the
Centre
speaker
centre speakers
The
and front
speakers
the
ideally
are
same
height.
But
normally place
it above
or
InstaliodSeup
below the
television.
?
Rear
speakers
Place left and
right
for surround sound
position
ers
a
of
case
wall
a
or
or
ceiling
smaller
other, and set the
?
playback.
and install them at
towards
In the
behind the
rear
listening
These
speakers
recreate sound motion and
For best results, do not install the
above the level of the listener's
to further
room
area.
disperse
speakers
-
90
ears.
too far
It is also effective
the sound.
size, if the audience is
above 60
speakers
rear
atmosphere required
behind the listening
to direct the rear speak-
cm
near
to the rear wall set the rear
than the listener's
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front
Speaker
(Right)
Rear
Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
15
Mini
Glossary
for Audio Stream
produce a 3D Surround effect, using 3D
Surround Sound technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to lisThis unit
& Surround mode
Allows you to
enjoy 5.1(or 6) discrete channels of high
a
trademark of DTS
Technology, LLC. Manufactured under license from DTS
Technology, LLC.
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy,
and improved dynamic range.
Use this mode when
playing movie
nel which carries the
"
effect of
being
effect with
DOLBY
in
"
which
intensity
an
PRO
LOGIC
"
Dolby Digital 2 chanmark. This mode provides the
movie theatre
a
can
or
or
live concert house-an
only
SURROUND.
be obtained
The
through
effect
of
nels from two-channel
sources.
This is done
any
sounds
or
Software with multichannel surround audio
according
signals
is
played
to the way it was recorded.
You
can
enjoy surround sound simply by selecting
the pre-programmed sound fields according
one
of
to
the
program you want to listen to.
Press SOUND MODE
mode you want
below.
repeatedly until the sound
appears in the display window as
Each time you press SOUND MODE button, the
sound mode is changed in the following order;
PRO LOGIC
→
→
PL2 MOVIE
3D SURROUND
→
→
PL2 MUSIC
→
PL2 MATRIX
BYPASS
When DVD is inserted.
using
used.
an
extracts
spatial properties of the original recording without adding
new
BYPASS
output chan-
advanced, high-purity matrix surround decoder that
the
Dolby Digital audio tracks.
change the stream of DVD (Dolby Digital, DTS,
PCM, etc) by pressing the AUDIO button on the remote during playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is
(II)
II creates five full-bandwidth
Dolby Pro Logic and
the
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much clearer and more dynamic than before.
Dolby Pro Logic
works with DVD discs encoded with
Sound Mode
The
"
can
ten to multi-channel audio from a home theatre. This feature
quality digital audio from DTS program sources such as
discs, DVD and compact discs, etc.bearing the trademark.
DTS Digital Surround delivers up to 6 channels of transparent audio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
sound field. The term DTS is
3D SURROUND
tonal colorations.
You
can
Each time you press AUDIO button, the sound mode of DVD
is changed as the following order;
→→→
MOVIE mode:
The Movie mode is for
use
with stereo television shows and
all programs encoded in Dolby Surround. The result is
enhanced soundfield directionality that approaches the
quality
of discrete 5.1-channel sound.
For your reference
?
last mode
MUSIC mode:
The Music mode is for
and
provides
with any stereo music recordings,
a wide and deep sound space. The Music mode
use
settings
?
includes controls that allow the sound to be tailored to individual
listening
The DVD/VCR Combi receiver memorizes the
tastes.
for each
individually.
You can identify the encoding format of
program software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
source
-
MATRIX mode:
-
The Matrix mode is the
same as
the directional enhancement
to enhance mono
the Music mode
logic is
signals by making
except that
turned off. It may be used
them seem "larger." The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
cause
signals from a logic decoder. The
"cure" for poor FM stereo reception may be simply to
disturbing
ultimate
surround
force the audio to
16
mono.
-
Note
?
play sound tracks with 96kHz sampling
frequency, the output signals will be converted to 48kHz
(sampling frequency).
When you
Before
in
Tuning
Operation-VCR part
video channel
a
on
your TV
Notes
?
The output frequency of this video recorder (VCR) is
set at UHF channel 36. If channel 36 is already
another TV station, or if the picture is
distorted, you can change the transmitter channel of
used
RF
by
7.
You
Your TV receives
ence
have
ally
from the video recorder
signals
like another TV station. You have to select
it,
8.
Insert
on
on
usu-
your DVD/VCR Combi
your TV.
pre-recorded
on
the
remote control. Select a TV channel number on
which you wish to watch video's.
Don't worry if you don't have a video-tape to
at this
play
If you switch your DVD/VCR Combi
and continue stages 3
4, instead of
stage!
receiver
on
~
tune your TV until you see
seeing video playback
a bright blue screen.
Tune this channel until the video
picture
is
sharp
and the sound is clear.
playback
Store this channel
on
on
blue
screen
your TV.
sure
a
on
For the following steps we do assume that you have
just connected your video recorder for the very first
time. In this case the video recorder is on after mains
connection. You should not touch any buttons yet. On
the connected TV you will now see.
your TV.
-
If this menu does not appear, your
recorder was programmed already.
Select the country
F andG.
according
video
to your area with
"A": Austria, "B": Belgium, "CH": Switzerland, "D":
Germany, "DK": Denmark, "E": Spain, "F": France,
"I": Italy, "N": Norway, "NL": Netherlands, "P":
your TV.
You will need to look at the TV instruction book if
on
Portugal, "S": Sweden, "SF": Finland, OTHERS.
8 if you cannot
obtain clear video playback as described in
Only
carry out
stages
1
stages
5
~
4. Select a TV channel number on
~
which you wish to watch video's.
Make sure that your DVD/VCR Combi receiver is
in standby pressing POWER on the remote control
(only
6.
bright
Initial preset
you do not know how to do this.
5.
a
your TV. If you do not
tune in a dedicated video channel on your TV you will
be unable to view and record video tapes!
1.
video
on
that
so
dedicated video channel
channel. The AV channel is
for
which you wish to
that you have correctly installed your
DVD/VCR Combi receiver and successfully tuned in
Note
already pre-tuned
on
Notes
If you have used a RCA-SCART cable you will not
have to tune your TV, simply select the AV
optimum
STANDBY/ON
appears. Store this channel
Make
video tape into your
DVD/VCR Combi receiver and press PLAY
a
TV channel number
Tune this channel
Press POWER to turn
RCA-SCART lead.
the front of your
DVD/VCR Combi receiver when you have finished.
that you have correctly installed your
described earlier in this book.
receiver. Turn
a
Press
sure
as
Select
a
watch video's.
called AV.
Make
also set it to "OFF" if there is any interferwhen your TV is connected to the DVD/VCR
can
Combi receiver with
a
on
dedicated video channel built into
a
VCR
4.
to select another video chan-
your DVD/VCR Combi receiver.
your TV and tune it in so that
you may watch video tapes. If you have used a
RCA-SCART cable then your TV should already
3.
or 4
nel. You may select any channel number between
22 and 68.
channel number
2.
Press PROG. 3
8 will
your DVD/VCR Combi receiver. Stages 5
show you how to change the output frequency of
(VCR)
1.
36
PSET
R
~
?
KAHAa
the clock will be
Press PROG. 3
displayed).
the front of your DVD/
VCR Combi receiver for more than 4 seconds.
or 4 on
A
BD
CH
NN L
DK
EFI
PSS F
Pr-12
ACMS
2.
Press OK to start the automatic storing of the
channels of the TV stations in your area.
RF36 will appear in the display window.
The following picture will be displayed on the TV
01
C02
00
PR-01
screen.
Pr-12
S
E
ACMS
17
Setting
the clock
Manually
The clock in your DVD/VCR Combi receiver controls
time and date settings for your DVD/VCR Combi
receiver.
1.
Press i.
Press 1
or
2 to select TIME DATE.
To set the colour system
1.
Press i.
2.
The main
3.
Press 1
or
4.
Press 3
or 4
menu
will appear
on
the TV
screen.
2 to select the SYSTEM and press OK.
to select
according
to the COLOUR
system used.
Press OK.
HHMNDDMMYY
--
:.
-
-
--
--
--
---
.
VCR
REC
12
TIME
DATE
2.
to alter the
ON
OFF
HOURS, MINUTES, DAY, MONTH and
5.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
of the week will appear
when you enter the year.
day
TEM
i
OPR
the remote control
on
YEAR.
The
2 to select the RF AUDIO.
Press 1
or
Press 3
or 4
to select
according
to the RF AUDIO
used.
automatically
12
fREC
VCR
E
Dr.
SYSTEM
OS
ON
OF
HHMNDDMMYY
8
SYS-
fOSD
i
Use the numbered buttons
Dr.
i
:.
0010104THU
.
12
TIME
DATE
i
6.
18
3.
If you make a mistake press 1
correct details.
4.
Press i.
or
2 and enter the
Press i to
remove
the
menus
from the TV
screen.
How to
the main
use
This DVD/VCR Combi receiver
the
programmed by using
screen.
The
menus are
Tuning
menu
easily be
displayed on
can
menus
controlled from the Remote
Control Handset.
1.
Switch
2.
Press i button.
your TV set and DVD/VCR Combi
receiver by pressing the POWER button.
The main
menu
will appear
on
the TV
If the TV broadcast
signal
To
this
Automatically
is weak your DVD/VCR
Combi receiver may not detect the necessary
information and will not be able to store them
correctly.
on
in TV Stations
overcome
problem please
the MANUALTUNING section
screen.
1.
Press POWER to turn
on
turn to
page 20.
on
your DVD/VCR Combi
receiver.
2.
Press i button.
The main
Press 1
will appear on the TV screen.
2 to select the ACMS. Press OK.
menu
or
VCR
Pr-12
PSET
R
ACMS
Dr.
NIC
fOSD
ON
OFF
?
REC
Timer
?
recording setting (see
p.
29).
12
REC
PSET
R
Dr.
ON
OFF
p.
Pr-12
NIC
fOSD
tuning setting (see
VCR
Pr-12
PRSET
Manual
?
OPR
OPR
20).
ACMS
ACMS
(Automatic Channel Memory System)
(see right column).
?
TIME DATE
A
NN L
Date & clock
?
setting (see
18).
receiver
System (see
problem with
(see p. 42).
a
3.
display
the
improve
the
NIC
To activate
p.
You
2 to select COUNTRY.
process.
(see
playback picture (see
p.
p.
43).
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
27).
S
E
Pr-12
deactivate the NICAM
or
digital
ACMS
sound
43).
4.
Tip:
Press i to
remove
the
menus
from the TV
screen.
the
change
setup menu. (See
can
Press 1
or
language
Menu Language
menu
the
on
2 to select the desired
Press OK and press 3
4.
or
(A:Austria, B:Belgium, CH:Switzerland,
D:Germany, DK:Denmark, E:Spain, F:France,
I:Italy, N:Norway, NL:Nertherlands, P:Portugal,
S:Sweden, SF:Finland, OTHERS)
Press OK again to start the automatic tuning
of your DVD/VCR
To select the aspect ratio of your TV
OPR
(see
3.
Press 1
16:9/4:3
To
?
18).
p.
your DVD/CD/VCR
operational mode
Combi receiver (see p. 42).
?
PSS F
Pr-12
fOSD ON/OFF
To
?
EFI
ACMS
Dr.
To check
?
p.
DK
SYSTEM
To set the Colour TV
?
BD
CH
Press i to return to
a
or 4
TV
the DVD
on
menu.
to select.
picture.
page
Press i to
save
your
settings.
23.)
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
19
in TV Stations
Tuning
In certain
5.
Manually
of the country broadcast signals
may be too weak for your DVD/VCR Combi
receiver automatic tuning process to find or
assign
The TV station
in order for your DVD/VCR
Combi receiver to store them.
1.
that you may
name
list will appear.
name
correctly.
You must tune in these weaker broadcast
stations
so
Press OK.
areas
TV stations
Press 2 to select STATION
your TV station.
PR
CH
MFT
09
C10
00
manually
PSET
R
Press i.
The main
will appear on the TV
2 to select the PR SET.
menu
Press 1 or
Press OK.
6.
screen.
Press D
or
E to select a station name from the list.
Press OK to select it.
If your station
OK, but go to
PR
CH
01
MFT
STATION
00
PR-01
name
isn't
stage
7.
on
the list do not press
VCR
Pr-12
REC
ACMS
2.
CHANNEL/CABLE
NIC
fOSD
ON
OFF
Dr.
:
AV
PSET
R
OPR
PR
CH
MFT
09
C10
00
Press i.
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune (for example, PR 09).
PSET
R
7.
You
rather
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
change a TV station name manually
than using the "standard" names.
can
Press G.
to select letters and numbers for
Press 3
or 4
the
station
new
Press 1
or
2 to
name.
move
back and forth between
characters.
,
Press OK.
3.
Press OK.
Press AV to select C
(Standard stations)
or
S
(Cable stations):
C02
PR
C09
CH
MFT
C10
00
STATION
C69, S01 S41.
Enter the channel number of station that you want
-
-
PSET
R
to tune with the numbered buttons or use 3 or 4
to find the
required
station.
8.
Press i, confirm the station
Press i again.
Your
PR
CH
STATION
--
----
09
MFT
new
TV station has
now
placement.
been tuned into your
VCR.
If you wish to
stages 1 8.
manually
tune other stations
-
CHANNEL/CABLE
:
AV
PSET
R
4.
will
Searching
stop when it locates
Press 2 to select MFT.
Press 3
or 4
to
a
station.
10
11
12
13
14
15
adjust.
16
PSET
R
PR
CH
09
C10
MFT
STATION
CHANNEL/CABLE
PSET
R
20
:
AV
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
repeat
the order of TV Stations
Changing
TV stations into your DVD/VCR Combi
receiver you may wish to change the order in
which they are stored without having to retune them
After
tuning
against!
The instructions
show you how you
your desired order.
1.
can
given on this page
simply move them
will
Deleting
TV stations into your DVD/VCR Combi
receiver you may wish to delete a station.
The instructions given on this page will show you
After
how
into
1.
will appear on the TV
2 to select the PR SET.
menu
Press 1 or
Press OK.
tuning
easily
delete any unwanted TV stations.
Press i.
The main
screen.
will appear on the TV
2 to select the PR SET.
menu
Press 1 or
Press OK.
Press i.
The main
TV Stations
PR
CH
screen.
MFT
STATION
00
PR-01
01
VCR
Pr-12
REC
PR
CH
MFT
STATION
00
PR-01
01
ACMS
CHANNEL/CABLE
NIC
fOSD
ON
OFF
Dr.
:
AV
PSET
R
OPR
VCR
Pr-12
REC
ACMS
2.
CHANNEL/CABLE
NIC
fOSD
ON
OFF
Dr.
:
AV
2.
PSET
R
OPR
Press i.
to select the programme number
you want to delete. (for example, PR 03)
Press 3
Press i.
or 4
to select the programme number
you want to move (for example, PR 03).
Press 2.
Press 3
or 4
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
3.
Press 3
MOVE
:
DELETE
:
or 4
01
C02
00
02
C03
00
PR-01
PR-02
03
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
07
C08
00
PR-07
08
C09
00
PR-08
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
PR-06
3.
MOVE
:
DELETE
:
,
Press 1.
short while, the selected station will be
deleted.
After
PSET
R
,
02
a
to select
the programme number you want to
example, PR 05).
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
PR-02
PR-04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
04
move
to
(for
01
C02
00
PR-01
02
C03
00
PR-02
04
C06
00
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
MOVE
DELETE
PSET
R
:
:
,
05
4.
Press i to
remove
the
from the TV
menus
If you wish to delete other TV stations
stages 1 3.
PSET
R
screen.
repeat
-
4.
Press OK.
The selected programme will be moved to the
new programme number.
If you wish to
other TV stations repeat stages 1 4.
Press i to remove the menus from the TV screen.
move
01
C02
00
PR-01
02
C03
00
PR-02
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
-
08
MOVE:
DELETE
PSET
R
01
C02
00
PR-01
02
C03
00
03
00
04
C05
C06
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations
ways.
Press 3
or 4
:
,
Stored TV stations:
can
be selected in either of two
to select different stations that are tuned
into your DVD/VCR Combi receiver.
You may also directly select stations
numbered buttons
on
using
the
the remote control.
21
Before
Operation-DVD part
On-Screen
Display
general playback status on the TV
screen. Some items can be changed using the menu.
To use the on-screen display:
You
display
can
the
1.
Press DISPLAY
2.
Press v / V to select
The selected item is
Press b / B to
3.
item.
inputting
For
number).
press ENTER to execute the
functions,
some
setting.
Number
Some discs may not
shown below.
b /
provide
0:20:09
Display only
b/Bor
AUDIO
mode
OFF
ABC
Display only
all of the features
Page (or Angle)
b/Bor
ANGLE
or
?
If
no
button is
screen
pressed for 10 seconds,
display disappears.
Playback
the
on-
1/3
Status/Restrictions
TITLE
A-B
1/9
Example: On-Screen Display during
playing VCD
Repeat
title
Repeat
sequence
Enter
Marker
MARKER SEARCH
123456789
Action
a
Items
Selection Method
Track Number
Marker Search
Resume
play
prohibited
menu
from this
or
1/3
Time search
point
Selection Method
Items
1/3
1/12
0:20:09
Angle
Sound
22
b /
B, Numbers
Numbers, ENTER
b/Bor
AUDIO
mode
Subtitle language
B, Numbers
ENTER
Audio language
and Digital Audio
Output
b /
ENTER
Time search
0:20:09
1 ENG
b/Bor
AUDIO
STEREO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Items
Selection Method
Track Number
1/3
0:20:09
Audio language
and Digital Audio
Output
b /
B, Numbers
ENTER
Time search
1
MP3
mode
Subtitle language
ABC
Numbers
ENTER
not available
Example: On-Screen Display during
playing DVD Video
Number
B, Numbers
ENTER
Sound
Title Number
b /
(or PBC mode)
Audio Channel
Chapter
B, Numbers
ENTER
DVD Audio
Output
B, Numbers
ENTER
Time search
Subtitle language
Notes:
?
b /
highlighted.
change
the title
Selection Method
Track Number
the setting. You can also
the number buttons if appropriate (e.g.
use
Items
Group
during playback.
an
Example: On-Screen Display during
playing DVD Audio
ABC
ENG
b/Bor
Numbers, ENTER
b/Bor
AUDIO
b/Bor
S-TITLE
S-TITLE
1/3
b/Bor
ANGLE
3D SUR
b/B
Sound
3D SUR
b/B
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound. You
can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 23 to 26.
To
Press SETUP to
display
the
To go back to the
previous
the remote control.
on
Disc Menu
Original
Use v / V to select the desired
alternate
Setup
menu
appears.
option then press
to the second level. The screen shows
the current
setting for
setting(s).
the selected item,
Use v / V to select the second desired
press B to
move
Menu
Language
Select
a
language
for the
Setup
Disc Audio / Subtitle / Menu
Operation
move
Move
Select
menu
and
on-screen
DVD-V
InstaliodSeup
DVD-A
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
2.
as
well
option
as
then
to the third level.
Original:
Refers to the
disc
recorded.
was
original language
track
in which the
Other: To select another
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
Use v / V to select the desired setting then press
ENTER to confirm your selection. Some items
require
5.
Off
Select the
Press SETUP. The
4.
Disc Subtitle
display.
level:
1.
3.
Original
screen.
To go to the next level:
Press B on the remote control.
B to
Disc Audio
A second press of
menu.
SETUP will take you back to initial
General
English
Language
and exit the Menu:
display
Press b
Menu
additional steps.
Press SETUP
or
PLAY to exit the
Setup
menu.
23
DISPLAY
5.
Display
Mode
Progressive
TV
Output
9Wide
16:
Aspect
Caution:
Widescreen
Scan
Once the
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Off
Select
RGB
Move
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "NO DISC" is displayed on the display window.
Select
Press STOP and hold it for five seconds before releas-
2)
TV
DVD-V
Aspect
4:3
:
Select when
DVD-A
a
Progressive
mode.
scan
DISPLAY
TV
ENTER will set this unit to
Pressing
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
standard 4:3 TV is connected.
16:9 Wide: Select when a 16:9 wide TV is connected.
TV
Display
Display
DVD-V
Mode
Mode
setting
DVD-A
works
only
when the TV
Aspect
the entire
Displays a wide picture with
lower portions of the screen.
Automatically displays
screen
Progressive
and cuts off the
the wide
bands
portions
on
picture
the
on
that do not fit.
to the
type.
NENT/PROGRESSIVE SCAN VIDEO OUT
jacks
on
this unit.
RGB: When your TV is connected with the SCART
(RGB signal) jack.
AUDIO
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn On
TV connection
Output Select options according
YPbPr: When your TV is connected with the COMPO-
LetterBox:
Panscan:
Select
Set this unit TV
mode is set to "4:3".
upper and
Output
progressive
Each DVD disc has
Set this unit
variety of audio output options.
AUDIO options according to the type of
audio system you
a
use.
AUDIO
5.1
scan:
Select
Speaker Setup
DRC
On
Vocal
On
Connect component out of this unit to the input of
your monitor/television, set your television or monitor
to
Component Input.
1. Select
"Progressive Scan"
on
the DISPLAY
menu
Move
then press B.
DISPLAY
TV
Mode
Progressive
TV
DVD-A
Speaker Setup DVD-V
Select speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 39.)
5.1
Aspect
Display
Output
Select
Scan
On
Off
Select
Dynamic Range
Control
(DRC)
DVD-V
DivX
DVD-A
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
4. When the confirm menu appears on your screen
Cancel is highlighted as default. Use the b button
to
24
highlight
Enter.
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
This allows you to listen to a movie at a lower volume
without losing clarity of sound. Set DRC to On for this
effect.
Vocal
DVD-V
Set to On
playing.
only
DVD-A
when
a
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
on
the disc mix into
OTHERS
DivX(R)
The PBC, Auto
Play
and
DivX(R) VOD settings
can
be
changed.
VOD
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
You
can
OTHERS
PBC
Auto
On
Off
Play
DivX(R)
DivX(R)
Your
Select
VOD
Video On Demand
registration
To learn
code is
more
:
XXXXXXXX
visit
www.divx.com/vod
Move
PBC
Set
(Done)
Select
Playback Control (PBC)
On: Video CDs with PBC
to On or Off.
are
encrypt
played according
to the
PBC.
Off: Video CDs with PBC
are
played
the
same
way
as
Audio CDs.
Auto
Play
move
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
Display
View
can
can
of
watch the file.
back the title
DivX(R)
Do you want to
Play
function is active.
Off: Auto
Play
function is not active.
use one
of your 3 views now?
automatically.
On: Auto
VOD Rental
This rental has 3 views left.
Play mode is set to On, this DVD player will
search for title that has the longest playback time and
play
the number which you
options
DVD-V
If Auto
then
file.
Notes:
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
You
InstaliodSeup
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
The
VCD
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
Play
function may not work for
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
25
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Country
enter or
2. Follow
step
"New" is
Move
DVD-V
Input
Select
for children to view.
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
alternative.
The
control feature allows you to block
to scenes below the rating you input, there
new
If you
forget
your
by
1.
Press SETUP to
2.
Input
the
6-digit
display
3.
Enter
a new
code
1. Select
Enter the code of the
"Rating"
on
the LOCK
menu
then
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
1-8:
tions and
from 1 to 8
using
Rating one (1)
rating eight (8) is
security
Code
DVD-V
as
described above.
DVD-A
country/area
whose standards
has the most restricthe least restrictive.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
a
the disc. The alternative must have the
rating or a lower one. If no suitable alternative
found, playback stops. You must enter the 4-digit
password or change the rating level in order to play
same
is
the disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
Select
"Country Code"
on
the LOCK
on
menu
the
then
press B.
2.
Follow step 2
3.
Select the first character
4.
Shift the
second
5.
If you select unlock, parental control is not active
and the disc plays in full.
on
1.
the v / V buttons.
Unlock
available
using
menu.
used to rate the DVD video disc, based
list in the reference chapter.
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
scenes
Setup
clear it
were
2. To access the
If you set
the same
the
can
number "210499" and the
Country
press B.
26
Security Code
your children from being able to view
material you believe is unsuitable.
Rating
then press ENTER.
If you forget your security code you
the following steps:
preventing
3. Select
or
code is cleared.
parental
access
4-digit code,
again to verify.
it
(Rating). "Change"
4. Press SETUP to exit the menu.
DVD-A
Some movies contain
2 as shown left
highlighted.
3. Enter the
Rating
change password.
1. Select Password on the LOCK menu then press B.
RU
Code
can
(Security Code)
as
shown left
(Rating).
using
v / V buttons.
using B button and select
character using v / V buttons.
cursor
the
Press ENTER to confirm your country code
selection.
Operation
Tape
Playing
a
You will
be able to load and
eject video cassettes
DVD/VCR Combi receiver is plugged into
only
when your
the mains. Your DVD/VCR Combi receiver may also
playback recordings from NTSC tapes (on PAL TV).
better
Getting
a
When
cassette is inserted and
a
picture
playback started,
the
automatic
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control or
press PROG. 3 or 4 on the front panel to manually
adjust the tracking until any distortions have been
removed. Press numbered 0
switch automatic
on
back
tracking
1. Make sure that you have
the remote control to
on
again.
connected your
described earlier in
correctly
DVD/VCR Combi receiver
as
this book.
your TV. Press POWER to turn on your
DVD/VCR Combi receiver. Insert the video cassette
Turn
on
into your DVD/VCR Combi receiver. The video cassette should have the window side facing up and
the
arrow
facing
away from you.
2. Press PLAY to start
playing
your tape.
video cassette which has had its
the best
tape.
If distortions
can
them with D
or
be
seen
in the
picture,
reduce
E.
6. Press STOP to end
InstaliodSeup
playback.
Press EJECT.
tape is reached, your DVD/VCR
Combi receiver will stop playback automatically,
rewind, stop, eject the tape.
If the end of the
CM
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
2 Press 60 seconds
3 Press 90 seconds
4 Press 120 seconds
5 Press 150 seconds
AUTO TRACKING
give
press the desired function.
During slow motion and shuttle, the noise bars may
appear on the picture according to the status of
1 Press 30 seconds
If you load a
record protection tab removed, playback of the
cassette will start automatically.
Your VCR will
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay) To switch off the slow motion and shuttle,
5. Slow motion
automatically adjust
picture quality.
the
tracking
to
6 Press 180 seconds
OPR
3. Press PAUSE/STEP to still
Press PAUSE/STEP
picture.
repeatedly to advance
a
the
(Optimum Picture Response)
This feature automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
tape frame by frame.
If you press FORWARD, the picture will be slowed
the condition of the tape.
down at about 1/19 times the normal
1. Press i.
for up to 5 minutes. After 5 minutes your DVD/VCR Combi receiver will stop the tape to prevent damaging the tape
playback. Tapes
can
be
paused
2. Press 1 or 2 to select OPR.
3. Press OK.
your DVD/VCR Combi receiver. Still picture quality can be improved slightly by pressing 3 or 4.
or
4. Press PLAY to continue
playing
your tape.
Picture search:
12
VCR
12
MS
During playing back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
where you
are on
the tape.
Logic search:
During fast forwarding
NIC
f
ON
OFF
4. Press
3
or 4
Dr.
rewinding press and hold
FORWARD or BACKWARD the picture will be
played back at 7 times normal playback speed.
i
OPR
repeatedly
to select:
OFF, SOFT
or
SHARP.
Please note you may
or
OPR
playing
a
only
set OPR when
tape.
5. Press i return to
screen.
27
Instant Timer
Recording (ITR)
5.
Instant Timer
video cassette
runs
6.
incorporates Long
which enables you to record up to twice
the amount of time on a video cassette. For examE-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to
record up to 360 minutes. Please note there will be
an
in
slight loss
using LP.
picture
sound
Press REC/ITR to start
and sound
quality
7.
Press PAUSE/STEP to continue
recording.
during ITR, this
If you press PAUSE/STEP
DVD/VCR Combi receiver will enter the record
that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
tape is paused. After 5
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
this book.
DVD/VCR Combi receiver.
Make
sure
on
your DVD/VCR Combi
Insert
video cassette with
a
facing
protection
tab into
up and the
arrow
facing
away from you.
when
Press STOP to end
a
recording.
EJECT will appear
seconds.
on
the TV
screen
for
a
few
Notes:
If you do not wish to record
on a
tape (this
can
Press PR v or V to select the programme
number you wish to record.
happen quite easily by accident!) remove the
protection tab on the back edge of the video
You may also directly select programme number
using the numbered buttons on the remote
cassette.
control.
If you wish to record directly from the SCART
sockets repeatedly press AV until the socket you
wish to record from is displayed.
AV 1 for
recording
from EURO AV1 SCART socket
of your DVD/VCR Combi receiver.
AV 2 for recording from EURO AV2 SCART socket
on
the
rear
of your DVD/VCR Combi receiver.
AV 3 for recording from VIDEO IN and AUDIO IN
on
the
&
rear
the front of your
DVD/VCR Combi receiver.
(Left
28
8.
displayed
Press EJECT.
your DVD/VCR Combi receiver.
The video cassette should have the window side
4.
unwanted
scenes.
when
receiver.
3.
recording
pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
Press POWER to turn
2.
recording.
Press PAUSE/STEP to avoid
will be
1.
much
as
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Play (LP)
a
SP will
or
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
Your DVD/VCR Combi receiver
ple
Long Play
produce improved picture and
quality, however LP will provide twice
recording time as SP.
Your DVD/VCR Combi receiver allows you to make
recordings using a variety of simple methods:
Recording (ITR) start recording
immediately for a set period of time or until the
Press SPEED if you wish to record in
Standard Play.
Right)
sockets
on
It is
possible to record on a video cassette
record protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
Timer
recording using
Display
On Screen
6. Press the numbered buttons to enter the
24 hour clock. e.g.
will be
1pm
displayed
as
13:00.
You may also select the the start and end times
pressing
Note
3
by
or 4.
Before setting the timer make sure that you have
set the DVD/VCR Combi receiver clock correctly and
you know which stations you have tuned TV
stations on your DVD/VCR Combi receiver.
protection
start
and end times of the programme that you wish to record.
Please note your DVD/VCR Combi receiver uses a
You may set up to seven timer record events
within one month of the current date.
1. Insert a video cassette with
recording
PR
DATE
TIME
16
PR-01
190020
::
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
tab into your
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
DVD/VCR Combi receiver.
The video cassette should have the window side
facing
up and the
facing
arrow
7. Press 2 to select the
away from you.
Press 3 or 4 to select the
or
IP mode determines how much tape is left and
switches speed from SP to LP, if necessary, to
2. Press i.
Press 1 or 2 to select REC.
Press OK.
3. Press OK to start
PR
full press 3 or 4 to
select the event that you wish to remove and
replace. Press 1 to delete the event.
PR
DATE
DATE
TIME
16
1900
::
2000
PR-01
If all timer record events
are
LP).
the program.
complete recording
the timer record event.
setting
recording speed.
desired tape speed (SP, IP,
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
8. Check that the timer event details
SP
--
SP
--
SP
--
correct.
Press i twice.
SP
--
are
If PLEASE CHECK is
you have entered
incorrect and will need to re-enter the data.
Press POWER to switch your DVD/VCR Combi
will appear in the display winreceiver Standby.
4. Press the numbered buttons to enter the station
that you wish to record.
When selecting stations 1
-
Stations 3
example
Channels by pressing
You may also select
Once selected press 2.
If you wish to record from AUDIO IN
VIDEO IN
on
the front
(L/R)
-
03.
3
and
the back of your unit, press AV to select
for correct display (AV1, AV2 or AV3).
sockets
recording standby mode,
or 4.
from the EURO SCART
or
dow while your DVD/VCR Combi receiver waits to
make the recording. To watch a DVD during timer
9, press 0 first, then
the channel number; for
DATE
9. Press STOP to end
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
?
SP
SP
SP
SP
SP
features. Press 1
or
2 to
select, then press OK to confirm.
DLY To record every day (except
Sunday) at the same time.
SU~SATo record at the
PR
same
DATE
PR-01
Saturday
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
--
and
time every week.
TIME
SP
SP
SP
SP
later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
a
Press 1 to delete the event...or
Press OK to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press
or 4 to enter the correct information.
SP
the programme. If you press OK before entering
the date you may select one of the following
recording
If at
change.
SP
5. Press the numbered buttons to enter the date of
automated
recording.
Notes
TIME
--
press POWER and DVD
to switch to DVD mode.
on
PR
displayed,
?
If Timer record events
Make
Overlap...
that the preset times of the timer
events do not overlap. If they do, the earlier
programme will always be given priority.
sure
Example:
Programme
3
recording
1 is
programmed
to start at 16:00 and end at
2 is
programmed
to start at 16:30 and end at
17:00.
Programme
17:30.
(In this case, Programme 1 will be recorded in its
only the last 30 minutes of Programme 2 will be
entirety, but
recorded.)
SP
SP
SP
SUMOTUWETHFRSA
29
If Timer record events
Overlap...
Change (Deleting)
Do not
overlap programmes, since overlapping portions of the conflicting programmes will not be recorded. Earlier recording times have priority over later
recording times as shown in the diagram.
If at
the Timer
Programme
later date you wish to delete or change any of
the settings in timer event memory you may do so
a
without
having to enter all the timer event information
again. Simply display the timer event screen. Press D
E to select the event that you wish to delete or
change. Press F to delete the event...or
or
Example:
Programme
1 will be recorded in its
the last 30 minutes of
Programme
entirety,
but
only
2 will be recorded.
then press F or G to select;
Station, Date, Start and End times and LP.
Press OK to
Press D
PROGRAMME 1
17:00
16:00
17:30
16:30
PROGRAMME 2
(This portion
If two
programmed
will not be
timer
recorded.)
recordings overlap
at
00:00 a.m., programme 2 will not be recorded.
30
midnight
or
change,
E to enter the correct information.
Playing
DVD
a
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
the TV and select the video
connected to the DVD
Turn
input
source
able
player.
2.
the audio system (if applicable) and select
the input source connected to the DVD player.
3.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the play-
on
back side down.
Press OPEN/CLOSE to close the tray. Playback
starts automatically. If playback does not start,
4.
press PLAY.
In
some cases,
the disc
menu
might
Unless stated otherwise, all operations described use
the remote control. Some features may also be avail-
to another TITLE
When
disc has
a
more
than
one
title, you
stopped
then the
b / B to move to another title.
You
play any title by inputting
playback is stopped.
can
its number while
Use the b B v V buttons to select the title/chapter
you want to view, then press ENTER to start.
When
title
DISC MENU to return to the
menu
buttons to select
want, then press ENTER to view the
4
option
option.
an
you
er
?
?
Menu
settings
and
operating
Press .
(See "PBC"
1.
track, you
one
chapter
can move
or a
to anoth-
follows:
or
>
Press and hold .
or
> for about two seconds
during playback.
Notes:
If
The
control is set and the disc is not within
parental
the rating settings
(See "Lock Menu"
you must
on
page
input
26.)
the
password.
2.
player.
(five).
your
a
The
region
code for this
DVD
during
timer
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
.
to select
the
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
DVDs may have a region code. Your player does
not play discs that have a region code different from
To watch
as
one
than
numberoruseb/B.
procethe
25).
than
more
briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
Press . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
Search
page
more
chapter/track
dures may differ. Follow the instructions on
each menu screen. You also may set PBC to Off
on
disc has
on a
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen.
a
disc has
?
3
to
playback is
appropriate number (0-9) or use
to another CHAPTER/TRACK
or
can move
another title. Press DISPLAY while
Moving
Use the 1 2
?
menu.
Moving
appear
screen.
?
Setup
instead:
Press TITLE
?
the
on
player
is 5
recording standby
mode, press POWER and DVD to switch to DVD
3.
To exit SEARCH mode, press PLAY.
mode.
Changing
the Audio Channel
Press AUDIO
different
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
31
Still Picture and
Frame-by-Frame Playback
Repeat
You
1.
2.
Press PAUSE/STEP
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
Press
DVD Video Discs
To exit still motion mode, press PLAY.
?
Slow Motion
?
Press PAUSE/STEP
The DVD
player
now
?
go into PAUSE mode.
?
?
2.
Press .
The
>
or
during
Use the .
or
or
t 1/2
or
T 1/2
required speed:
(backward), or
(forward).
To exit Slow Motion mode, press PLAY.
?
?
?
?
playback
in
reverse
is not
with
possible
On
on
Random
Press RANDOM
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
All
on
Repeat
the TV
Track/All/Off
repeats the current track
repeats all the tracks on a disc.
:
Off
-
:
does not
:
play repeatedly.
-
Repeat Track/Group/Off
Track: repeats the current track.
Group: repeats the current Group.
Off
does not
:
play repeatedly.
Video CD with PBC, you must set PBC to Off
the setup menu to use the repeat function (See
a
screen.
on
page
25).
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
?
The unit
Track
"PBC"
Video CDs and DivX Discs.
1.
Title: repeats the current title.
Off : does not play repeatedly.
Notes:
Note:
Slow motion
-
DVD Audio Discs
> to select the
t 1/16, t 1/8, t 1/4
T 1/16, T 1/8, T 1/4
3.
pause.
will enter SLOW mode.
player
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
Video CDs
(X) during playback.
will
a
repeat mode.
?
1.
title/chapter/all/track on a disc.
REPEAT during playback to select a desired
play
can
(Track)
3D Surround
To
produce
a
3D surround effect that simulates multi-
channel audio from two stereo
2.
Press RANDOM
again
speakers (instead of
the five+ speakers normally required for multi-channel
audio from a home theater system).
to normal.
Tip:
By pressing
.
or
>
the unit selects another
Random
during Random playback,
title (track) and resumes
playback.
a
setup
Video CD with
menu
PBC, You
must set PBC to Off on the
to use the random function
(See "PBC"
on
to select the sound
or 4
option
Use1or2totoselect"3DSUR".
To turn off the 3D Surround effect, select "Normal".
To start
a
1.
sequence.
Press A-B at your chosen
appears briefly on the TV
starting point.
"
A
*
Press DISPLAY
"
end
point.
screen
during playback. The
elapsed playing time.
time search
2.
Press v / V to select the time clock icon and
"-:--:--" appears.
3.
Input
screen.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
at any chosen time on the disc:
box shows the
Press A-B
Press A-B
playing
and the
the
required
start time in
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
seconds from left to
to cancel.
4.
right.
Press ENTER to confirm.
selected time.
32
will be
option.
highlighted.
page
A-B
To repeat
3.
Use 3
during playback.
Time Search
Repeat
2.
2.
3.
25).
1.
Press DISPLAY
The sound
Note:
On
1.
Playback
starts from the
Zoom
Use
to
zoom
Press ZOOM
1.
the video
enlarge
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
1600% size
→ screen
fit mode
→
the
can
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
the way the
when
image appears on
you're playing a DVD movie.
Use the bBvVbuttons to
zoomed
4.
To
normal
repeatedly
or
?
move
through
the
playback,
appears
menu
may appear.
menu
on
press ZOOM
Press DISC MENU
If the disc contains
Marker
a
desired
point
the TV
screen
the disc. The Marker icon appears
briefly. Repeat to enter up to nine
on
on
markers.
To Recall
or
1.
During
disc
search
menu
Clear
a
Marked Scene
options,
angles,
and
press SEARCH. The marker
appears on the screen.
scene.
playback
a
marker
starts from the
Or, press CLEAR and the marker
number is erased from the list.
any marker by
the marker search menu.
can
is
displayed.
to exit.
recorded at different
scenes
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
the Audio
Language
playback,
Press ENTER and
marked
again
menu
Angle
Changing
Within 10 seconds, press b / B to select
number that you want to recall or clear.
on
subtitle
as camera
camera
playback from up to nine memorized
To enter a marker, press MARKER at the
start
can
You
the
Otherwise, the disc
screen.
Press DISC MENU and the disc
To enter
4.
a menu,
Disc Menu
Camera
3.
the b
Press TITLE to exit.
3.
CLEAR button.
Marker Search
2.
or use
selection. Then press
offers features such
spoken language and
chapters for the title.
disc, VR disc and movie file.
points.
the
menu
The
2.
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
You
number
Press TITLE. If the current title has
1.
Notes:
?
corresponding
to highlight your
ENTER.
picture.
resume
the
B v V buttons
Press 3/4 to select between Normal, Enhanced,
and Maximum.
3.
Input
Title Menu
change
screen
Checking
100% size
Screen fit mode:
You
DVD Features
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
Special
play
inputting
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear a
With DVD-RW discs recorded in VR mode that have
both
Bilingual audio channel, you can
switch between Main (L), Bilingual (R), or a mix of
both (Main + Bilingual) by pressing AUDIO.
a
main and
a
its number
Subtitles
Press S-TITLE
different
repeatedly during playback
subtitle languages.
to see the
Note:
?
The subtitle file of the DivX file is
displayed only
smi, srt and sub.
?
If there is
no
information
not read in the DivX
file,
or
"
1
there is
"
or
a
code that
etc. are
can
displayed.
33
DVD Audio Discs
DVD Audio is
Moving
disc format
the
building
cess of DVD to provide high quality, uncompressed,
multi-channel audio for a new experience in audio
quality. A DVD Audio disc can be identified by the
DVD audio logo on the disc jacket or on the disc itself.
DVD Audio
a new
on
suc-
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
can
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
to another GROUP
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access different groups during playback via the on-screen dis-
play.
1.
Press DISPLAY
2.
Press 3/4 to select
3.
Press 1/2
a
or
during playback
Group
on
in
stop mode.
icon.
the numbered buttons
(0-9)
to select
group number.
Note:
DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
tent that can
used for music, either Advanced Resolution multichannel sound quality that is closer to the artist's mas-
word. If the lock icon appears on the TV screen, enter
the password (sometimes you'll find it on the disc's
typical
ter
recording
or
for
Audio discs contain
longer recordings. Many
DVD
text, such as artist
lyrics. Some DVD Audio
on-screen
biographies, playlists, or
discs contain photo galleries
or
video
clips.
Note:
To
enjoy
maximum sound
quality
Sometimes the author of the disc creates hidden
jacket
only
be accessed
cover or on a
isn't dictated
by
web
site).
by entering
This
a
pass-
password
your DVD/CD receiver
---
con-
it is
control
a
func-
tion of the disc.
Since the
authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be available for the disc you're playing.
and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/CD
receiver). If you use the DIGITAL OUT (OPTICAL or
COAXIAL) for your audio connection, the sound will
only be similar to CD-quality sound even though
you're playing a DVD Audio disc.
Viewing
another PAGE
Since DVD Audio discs
lot of content, there
what's available on the disc.
can
hold
a
are
various ways to
see
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
authoring of DVD Audio Discs varies, some
of the on-screen display choices might not be available for the disc you're playing.
34
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
as
compatibility
with this
player
is
follows:
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
PLAY or ENTER and playback starts.
?
?
AUDIO CD
1/12
0:52:07
List
Program
Track1
Track2
Track3
?
Track4
creates an ISO 9660 file
system.
File
a
names
and must
Track5
Track6
Track7
?
Clear All
Track8
PROGRAM
They
should have
.mp3 or .wma extension.
contain special letters such as /
incorporate
should not
maximum of 8 letters
an
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
folder, and press ENTER
a
to see the folder contents.
2.
Press v / V to select a track then press PLAY
ENTER. Playback starts.
or
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
Operation
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
This DVD
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
Info
PROGRAM
Edit
should
Tip:
?
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
always
be
sought
from the
copyright
owner.
If you
are
in
file list
a
return to the Folder
on
list,
the MUSIC
menu
the v / V to
use
and want to
highlight
and
press ENTER.
?
?
?
Press DISC MENU to
On
to the next page.
move
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
on
When
a
playing
titles, you
top of the
menu
is
highlighted.
file
can see
containing information such as track
the information by pressing DISPLAY.
35
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
playback, press PLAY,
PAUSE/STEP again.
press
2.
during playback.
To return to
2.
during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
Press PAUSE/STEP
1.
Press RANDOM
ENTER
until
repeatedly
or
playback, press RANDOM
RANDOM disappears from the
To return to normal
menu screen.
Tip:
Moving
Press .
1.
>
or
the next track
to
or
briefly during playback to go to
return to the beginning of the
current track.
Press . twice
2.
previous
In
briefly
to
step back
to the
track.
2.
To repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
Press A-B
Repeat
(0-9).
unit selects
A-B
and "A" appear
case
tons
Repeat
1.
of audio CD, to go directly to any track,
enter the track number using the numbered but-
3.
>
during random playback, the
another track and resumes random playback.
By pressing
to another Track
on
the
menu screen.
at your chosen end point. The
icon and "A-B" appear on the menu
again
screen, and the sequence
begins
to
play
repeatedly.
Track/All/Off
Repeat
You
1.
3.
can
play
a
track/all
on a
Press REPEAT when
disc.
playing
a
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
disc. The repeat
menu screen.
icon appears.
2.
Press REPEAT to select
?
?
?
a
desired repeat mode.
To
Track: repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
does not
once
produce
a
3D surround effect that simulates
multi-channel audio from two stereo
speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).
play repeatedly.
Note:
If you press >
3D Surround
during Repeat Track playback, the
1.
Press AUDIO
"3D SUR." appears
repeat playback cancels.
2.
1.
or
> for about two seconds
during playback.
The
2.
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
to select
the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction
are
indicated
screen.
3.
36
until
menu screen.
Press and hold .
To exit SEARCH mode, press PLAY.
on
the
menu
on
the
menu screen.
playback, press AUDIO
"3D SUR." disappears from
To return to normal
repeatedly
Search
during playback.
the
Repeat Programmed
Programmed Playback
1.
The program function enables you to store your
favorite tracks from any disc in the player memory. A
program
1.
Insert
2.
?
?
Audio CD
2.
MUSIC
or
menu
on
the
right
again, then
the Program
the
mark will
E
MUSIC
1/12
0:00:00
Track5
2-Music2
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Clear All
7-Music7
DISPLAY
Audio CD Menu
Video CD: Press PROGRAM while
The program
PROGRAM to exit the
Press B to
3.
Use v/V to select the track that you wish to
from the "Program" list.
4.
Press CLEAR.
playback
Erasing
is
menu.
Video CD with PBC, you must set PBC to Off
the setup menu to use the programmed playback
a
(See
move
to the
"Program"
list.
Repeat
erase
Operation
to erase additional tracks
the
Complete Program
List
1.
Follow steps 1-2 of
List" as above.
2.
Use 3/4 to select "Clear All", then press ENTER.
"Erasing
a
Track from
complete Program for the disc
Program
will be erased.
on
25).
page
:
the list.
The
on
List
Program
Press PROGRAM in the stop mode to
enter Program Edit mode.
on
Note:
"PBC"
Track from
2.
appears. Press
menu
a
Video CD
PROGRAM Edit
Info
MP3/WMA Menu
stopped.
during Repeat Track playback, the
E
Program
Track1
Track5
once
1.
PROGRAM Edit
On
play repeatedly.
1/12
List
E
Program
Track8
does not
menu screen.
Edit mode.
AUDIO CD
List
desired repeat mode.
repeat playback cancels.
of the word
right
side of the
Press PROGRAM
0:52:07
Off(No display):
Erasing
to exit
a
Track: repeats the current track
All: repeats all the tracks on programmed list.
If you press >
Note:
disappear
disc. The repeat
Note:
appears.
Press PROGRAM.
The E mark will appear to the
"Program"
a
MP3/WMA Discs:
or
AUDIO CD
playing
Press REPEAT to select
?
disc.
a
Press REPEAT when
icon appears.
contain 30 tracks.
can
Tracks
Note:
The programs
removed.
are
also cleared when the disc is
VIDEO CD
List
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
E
Track5
Clear All
Video CD Menu
3.
Select
the "List", then press ENTER to
the selected track on the "Program" list.
a
place
Repeat
4.
track
to
on
place
additional tracks
playing
on
the
Press PLAY or ENTER to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks
"Program" list have played once.
6.
the list.
Press B.
Select the track you want to start
"Program" list.
5.
on
To
resume
playback,
normal
select
a
playback
track of
on
the
from
programmed
CD (or MP3/WMA) list
and then press PLAY.
37
Viewing
JPEG Disc
a
Moving
you can view Kodak PICTURE
CDs and discs with JPEG files.
Using
1.
this DVD
Player
disc and close the tray. The PHOTO
appears on the TV screen.
Insert
a
menu
Press .
List
>
once
during viewing a picture
or to the previous file.
to
JPEG
Zoom
(see
PHOTO
or
advance to the next file
Use
JPEG
to another File
the
to
enlarge
page)
zoom
33
photo image.
Preview
To rotate
JPEG Folder 1
JPEG Folder 2
picture
>>>
JPEG Folder 3
Press v / V
JPEG Folder 4
during showing
JPEG Folder 5
picture
JPEG Folder 6
JPEG Folder 7
clockwise
or
a
to rotate the
picture
counter clockwise.
JPEG Folder 8
To listen to MP3/WMA music
watching picture
JPEG
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Slide Show
1.
move
or
PLAY.
files while
on
same
containing
to MP3/WMA
disc.
the two types of file in
player.
display PHOTO
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
Playback
STOP is
to the next page.
listening
the
2.
to move
photo
a
menu.
file.
icon then press ENTER.
starts. The playback will continue until
pressed.
Tip:
JPEG
Use vVbBto
press ENTER.
display
Insert the disc
the
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Press DISC MENU to
can
music files recorded
and press ENTER.
highlight
3.
on
You
To listen to
highlight
the
(Slide Show)
then
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Tip:
?
There
are
(Normal)
?
On
three Slide
and
(Fast),
>>
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
a
PHOTO word
?
>
Speed options
(Slow).
: >>>
on
top of the
menu
is
JPEG disc
limited
?
highlighted.
as
compatibility
with this
player
is
follows:
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an on-
Depending
after several minutes, some of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
screen
Press RETURN, information of file is hidden.
display
---
Still Picture
1.
2048
Press PAUSE/STEP
The
2.
JPEG
player
will
now
during
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
pixels
and burn another disc.
The total number of files and folders
the disc
should be less than 650.
press
?
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
Ensure that all the selected files have the
extensions when
?
?
copying
into the
".jpg"
CD layout.
If the files have
rename
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
38
on
by
shown
Explorer.
".jpg"
extension will not be
this DVD
as
player.
JPEG image
Even
though
files in
5.1
Speaker Setup
This
to
chapter includes important reference information
help you set your DVD/VCR Combi receiver.
If you connected
following settings
for the built-in 5.1 channel
how far the sound has to travel to reach your set listening point. This allows the sound from each speaker
Press b / B to
1.
Press SETUP. The setup
2.
Use v / V to select the AUDIO
3.
move
menu
speaker.
[0.3(1)m(ft)
appears.
option
move
Speaker Setup option
to the third level. "Select" is
Press ENTER and 5.1
the Distance of the selected
6.0(20)m(ft)]
Test
then
high-
lighted.
4.
-
adjust
then press
to the second level.
Use v / V to select the
press B to
to your DVD/VCR Combi
to reach the listener at the same time.
surround decoder.
B to
speakers
receiver, setting the Distance lets the speakers know
Speaker Setup
Make the
Distance
Speaker Setup
menu
appears.
Press b / B to test the
signals
of each
the volume to match the volume of
rized in the system.
Front Left (L) → Center
→
Rear Left
(R)
→
Front
Right (R)
Right (L) → SubWoofer
→
Rear
speaker. Adjust
test signals memo-
AUDIO
Speaker
Size
Volume
Distance
Test
Operation
Front L
Small
dB
0
m(ft)
0.6(2)
Off
Select
Move
Return
5.
Use b / B to select the desired
6.
Adjust options using
7.
Press RETURN to return to the
Speaker
Select
Enter
speaker.
v / V / b / B buttons.
menu screen.
selection
speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
a
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
speaker settings
change the settings.
are
fixed, you cannot
Volume
Press b / B to
adjust the output
speaker. (-6dB 6dB)
level of the selected
~
39
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
the DVD-Video format that have been
a
?
using
finalized using
Refer to the information in this
contacting
This unit will
play DVD-RW discs recorded using
Recording (VR) format.
disc and close the tray. The TITLE LIST
appears on the TV screen.
Insert
a
menu
DVD-VR
When
Please
shipping
save
?
Press v / V to select a track then press PLAY
ENTER and playback starts.
Press TITLE to
move
or
to the list menu.
Do not
the
use
near
volatile
liquids
such
as
insecticide
the unit.
plastic products in contact
long period of time. since they
Do not leave rubber
or
with the unit for
a
leave marks
the surface.
Cleaning
on
the unit
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
To clean the
Note:
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
the unit
the exterior surfaces clean
spray
?
service technician.
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
3.
before
the Unit
Handling
Keeping
2.
a
chapter
DVD-recorder.
the Video
1.
Maintenance and Service
Some DVD-VR disc
are
made with CPRM data
by
DVD
RECORDER. Player does not support these kinds of
discs.
Do not
or
strong solvents such
use
thinner,
as
these
as
might damage
alcohol, benzine,
the surface of the
unit.
What is 'CPRM'?
CPRM is
only
copy protection system (with scramble system)
allowing the recording of 'copy once' broadcast
a
programs. CPRM stands for Content Protection for
Recordable Media.
This
play is CPRM compatible, which
means
that you
can
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
only be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players that
40
are
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
player is a high-tech, precision device.
optical pick-up lens and disc drive parts are dirty
worn, the picture quality could be diminished.
If the
or
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
use.
For details, please contact your nearest authorized
service center.
Playing
a
DivX Movie Disc
DivX disc
this DVD
Player
you
can
play
disc and close the tray. The MOVIE
appears on the TV screen.
Insert
player
is limited
DivX disc.
?
1.
with this
follows:
as
Using
compatibility
a
menu
Available resolution size of the DivX file is under
720x576
?
MOVIE
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
If there is
impossible code to
file, it may be displayed as
display.
express in the DivX
mark on the
If the number of the
frame is
"
Movie Folder 3
Movie Folder 4
Movie Folder 5
Movie Folder 6
Movie Folder 7
"
_
Movie Folder 8
?
screen
over
30
per 1 second, this unit may not operate
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
2.
v / V buttons on the remote to
normally.
?
file is not
and
highlight
?
If you want to view a particular file, press
v / V to highlight a file and press ENTER
or
PLAY.
?
If the file is recorded with
GMC, the unit
*
GMC?
Operation
MPEG4 encoders, like DivX or Xvid, have this option.
There are different levels of GMC encoding, usually
called 1-point, 2-point, or 3-point GMC.
Press DISC MENU to
On
move
to the next page.
CD with MP3/WMA, JPEG and MOVIE file, you can
switch MUSIC, PHOTO and MOVIE menu. Press TITLE
and
is
audio is
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
Tip:
?
or
supports only 1-point of the record level.
Press STOP to exit.
4.
interleaved, either video
outputted.
press ENTER.
3.
If the video and audio structure of recorded
a
MUSIC, PHOTO and MOVIE word
highlighted.
on
top of the
menu
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
?
-
within 32
?
Bit
32
48kHz
(WMA)
rate: within 8 320kbps (MP3),
192kbps (WMA)
-
-
-
41
Additional Features-VCR part
On Screen
You may
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will
appear on the TV screen. If a recording is taking
place
these On Screen
onto the
Displays
This feature informs you that there is a problem with
your DVD/VCR Combi receiver. These error messages will appear
1.
will not be recorded
the TV
screen.
Press i.
Press 1
tape.
on
or 2
to select Dr.
Press OK.
Press CLK/CNT to
1.
Press CLK/CNT
display.
repeatedly
to
cycle through
VIDEO DOCTOR
the
HEAD STATUS
display options. The tape counter and amount of
tape left will appear if there is a tape loaded.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
PSET
R
REC
Pr-12
ACMS
TIME
DATE
NIC
fOSD
2.
(Self-Diagnosis)
majority of the On Screen
leaving only the clock or tape
ON
OFF
After 3 seconds the
Displays
will clear
counter and the amount of
Press CLK/CNT
the TV
again
tape left on the screen.
to remove all displays from
2.
16:9
4:3
OK
OPR
Press
3 or 4
to check a
problem.
HEAD STATUS
O
screen.
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
Tape Counter Memory Stop
Digital Tape Counter
display window instead of
The
O
Insert
displayed on the
the time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
on
1.
can
be
O
O
Press CLK/CNT.
or
2Shows
the number of timer
recording.
recording.
will display the
Press STOP when
playback
or
actual
recording
play
PR-01 26 10:00~11:00SP
Shows the current status of timer
start
The tape counter
in hours, minutes and seconds.
time
is
complete.
Press BACKWARD.
The tape will rewind and automatically stop when
the counter returns to 0:00:00.
42
tape with its protection tab in place
NEXT TIMER PROGRAMME
Press CLEAR to set the counter to 0:00:00.
2.
a
NO. OF TIMER PROGRAMME
the tape.
Press PLAY
NOT RECORDABLE:
3.
Press i
recording.
Hi-Fi Stereo Sound
Your DVD/VCR Combi receiver will record and
back Hi-Fi stereo sound. In addition it has
NICAM
Wide Screen
System
a
play-
stereo
stereo sound decoder. This allows you
to record and playback the sound in several different
digital
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
1.
or
1.
another Hi-Fi VCR.
Your DVD/VCR Combi receiver's NICAM digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
bilingual and mono sound. The particular type of
sound received or that recorded will be briefly displayed on the TV screen for a couple of seconds:
STEREO NICAM
Sound is automatically recorded on the Hi-Fi
stereo and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
REC
ON
OFF
2.
The choice is STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary language is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The primary language willbe output from both
channels when the audio setting is MONO.
Please note that when adjusting the tracking
control Hi-Fi stereo sound may revert to MONO.
ACMS
REC
Dr.
Dr.
ACMS
fOSD
NIC
ON
OFF
OPR
Press D
PSET
R
Pr-12
or
E
repeatedly
OPR
to select:
AUTO,
4:3 or
16:9.
AUTO:
back Wide-Screen
Wide-Screen and Normal
normal.
Automatically plays
programmes
programmes
as
as
4:3
Only for playing back
recordings (4:3).
The sound is recorded on the Hi-Fi tracks and the
mono track of the video tape without any separation.
3.
VCR
Pr-12
PSET
R
fOSD
MONO
Press AUDIO repeatedly until the desired audio
mode appears.
Switch on your VCR.
Press i.
Press F or G to select 16:9/4:3.
Press OK.
VCR
tape.
2.
16:9
Your DVD/VCR Combi receiver can record and play
back wide screen aspect ratio programmes (16:9). To
record a wide screen format programme successfully
the correct type of wide screen signal must be broadcast by the TV station.
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio system, video disc
Compatibility
and
recording
Normal format
16:9:
for playing back and
format recordings (16:9).
Only
recording Wide-Screen
VCR
Pr-12
REC
PSET
R
ACMS
Dr.
fOSD
ON
OFF
3.
OPR
Press i to remove the menus from the TV screen.
To enjoy Wide-Screen playback you must
connect your DVD/VCR Combi receiver to the TV
using a RCA-SCART cable.
43
Additional Features
Last Scene
Memory
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
if you remove the disc from the player or switch
off the player. If you load a disc that has the scene
even
memorized, the
scene
is
automatically
recalled.
Note:
player does not memorize the scene of a disc if you
switch off the player before commencing to play the disc.
This
Screen Saver
The
appears when you leave the DVD
mode for about five minutes.
screen saver
player
in
Stop
Video Mode
Setting
With certain discs, the
playback picture may be
flickering or Dot Crawl is shown on straight lines.
That means Vertical interpolation or De-interlace is
not perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
the video mode, press and hold
DISPLAY about 3 seconds during disc playback.
change
The
video mode number selected is
displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
new
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
MODE1
al
or
:
Description
The
video
source
of each Video Mode
material of the DVD video
(film materi-
material) is determined from disc information.
Suitable for playing film based content or video
based material recorded by the progressive scan method.
MODE2
:
Suitable for playing video based content with
comparatively little motion.
MODE3
:
Note:
The video mode
setting only
Progressive Scan
menu.
44
works when the
mode is set to "On"
on
the setup
Copying
from DVD To VCR
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
to set
sure
setup
protected,
2.
3.
to "Off" on the
from another video
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another DVD/VCR Combi receiver
or a
camcorder.
menu.
If the DVD you
1.
"Progressive Scan"
Recording
to copy is copy
you may not be able to copy the disc.
are
attempting
Note:
In the
this video recorder will be
one
will be referred to
following description,
used for recording and
as
Insert Disc
DVD/VCR Combi receiver B. The other
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
be used for
Insert VHS
1.
DVD/VCR Combi receiver A should be connected
to the SCART socket on the rear panel of your
unit or the AV sockets on the front panel of your
unit.
2.
Insert the recorded tape into DVD/CD/VCR
receiver A and a blank tape into DVD/VCR Combi
receiver B.
3.
Press AV until the socket you wish to record from
is displayed. (DVD/VCR Combi receiver B)
Tape
blank VHS
Insert
a
Copy
the DVD to VHS
videotape
Tape
Press the REC/ITR button.
If the DVD disc
to press the
appears, you may need
button manually to begin
menu
Play
and will be referred to
will
as
DVD/VCR Combi receiver A.
into the VCR deck.
The DVD will go into Play mode and the
DVD/VCR Combi receiver will go into Record
mode.
playback
appliance
copying.
from EURO AV1 SCART socket
on the rear of your unit.
AV 2 for recording from EURO AV2 SCART socket
on the rear of your unit.
AV 3 for recording from VIDEO IN and AUDIO IN
(Left & Right) sockets on the front of your unit.
AV 1 for
Note:
If you press the REC/ITR button, be sure this
DVD/VCR Combi receiver in DVD mode.
4.
Stop
the
Copy
Process
When the DVD is finished
end the copy.
playing,
press STOP to
You must stop the Copy process manually
when the DVD movie ends, or the unit may
replay
and record
over
and
over
again.
recording
4.
To start recording, press the REC/ITR on
DVD/VCR Combi receiver B and PLAY on
DVD/VCR Combi receiver A.
5.
When you want to finish copying, press the STOP
on both DVD/VCR Combi receiver.
45
Presetting
You
make
sure
Preset radio stations in the DVD/VCR Combi receiver
that you have turned down the vol-
Press FM/AM
the remote control
on
front
on
memory first
(see "Presetting
radio stations"
on
the
left).
ume.
1.
to the Radio
Listening
preset 50 stations for FM and AM. Before
can
tuning,
the Radio Stations
panel until the frequency
the display and TV screen.
or on
the
1.
band appears
Press FM/AM
on
the remote control
front
on
panel until the frequency
the display and TV screen.
or on
the
band appears
The last received station is tuned in.
2.
Press 3/4
on
the remote control
select the
preset station you
repeatedly
to
want.
Each time you press the button, the DVD/VCR Combi
RADIO
AM
522kHZ
3.
OK, CLEAR
,
2.
receiver tunes in
01
Press 3/4
one
preset station
at a time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on
the remote control repeatedly.
-
the remote control to select your
desired radio channel.
on
To Clear the Stored Radio
Stations
1.
RADIO
FM
Press FM/AM
108. 00MHZ
4.
Press FM/AM
panel
on
the remote control
(3/4)
hold down 1 and 2
on
2
the
band appears
or on
the
to select the desired band.
Hold down PRESET
or
panel until the frequency
the display and TV screen.
or on
OK, CLEAR
,
front
the remote control
front
06
on
3.
on
seconds, and
a
on
the front
panel
or
RADIO
the remote control for 1
FM
06
108. 00MHZ
station is searched for
OK, CLEAR
,
automatically.
2.
RADIO
FM
Press 3/4
the remote control to select your
desired station.
on
06
87. 50MHZ
,
OK, CLEAR
RADIO
AM
5.
Press MEMORY
on
the remote control.
,
3.
10
522kHZ
OK, CLEAR
Press CLEAR the remote control to clear the
stored radio station.
6.
Repeat steps
2 to 5 to store other stations.
RADIO
FM
10
98. 00MHZ
,
OK, CLEAR
Note
record pause mode, the CLEAR
function may not be operated.
While record
46
or
Tuning
1.
into
Station
a
Press FM/AM
on
Manually
the remote control
front
on
2.
panel until the frequency
the display and TV screen.
Press FM/AM
front
3.
panel
on
or on
the
band appears
the remote control
or on
the
to select the desired band.
Press PRESET
(3/4)
on
the front
panel
or
press 1 and 2 on the remote control to tune
in the desired station.
Tuning
into
a
Station
Hold down PRESET
(3/4)
on
Automatically
the front
down 1 and 2
on
seconds, and
station is searched for
a
panel
the remote control for 1
or
or
hold
2
automatically.
Note
The search may not stop at
weak signal.
a
station with
a
very
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
answer
telephone, MUTING
the display.
the
appear in
example,
to
and MUTE indicator
47
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
Telugu
8469
Bhutani
6890
Hindi
7273
Thai
8472
Bihari
6672
Hungarian
7285
Tibetan
6679
Breton
6682
Icelandic
7383
7869
Nepali
7879
Norwegian
Oriya7982
8065
Panjabi
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya8473
Tonga8479
Burmese
7789
Interlingua7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
Estonian
6984
Latin
7665
Shona8378
Yoruba8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
Zulu
Country
Choose
a
8368
8373
8471
7473
9085
Codes
country code from this list.
Code
Country
AF
Afghanistan
ArgentinaAR
Code
Country
EthiopiaET
FJ
Fiji
Australia
AU
Finland
AustriaAT
Country
Malaysia
Code
MY
Saudi Arabia
SA
Maldives
MV
SN
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Country
Code
SG
SK
Belgium
BE
Germany
DE
MongoliaMN
SloveniaSI
Bhutan
BT
Great Britain
GB
Morocco
MA
South AfricaZA
Greece
GR
Nepal
NP
South KoreaKR
BoliviaBO
48
following
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
Switzerland
CH
Taiwan
TW
ChinaCN
IndiaIN
NigeriaNG
NO
Norway
ColombiaCO
IndonesiaID
Oman
OM
Thailand
TH
TR
UG
Congo
CG
Israel
IL
Pakistan
PK
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
PY
Ukraine
UA
Czech Republic
Denmark
CZ
PH
United States
US
DK
JP
Japan
KenyaKE
Paraguay
Philippines
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
Portugal
PT
Uzbekistan
UZ
Egypt
EG
Romania
RO
Vietnam
VN
El Salvador
SV
LibyaLY
LU
Luxembourg
Russian Federation
RU
Zimbabwe
ZW
JM
KW
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
contacting
service.
Cause
Symptom
Correction
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD/VCR Combi
receiver does not work.
No disc is inserted.
No tape is inserted.
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
No
The TV is not set to receive DVD/VCR
Combi receiver signal output.
Select the appropriate video input mode
on the TV so the picture from the
DVD/VCR Combi receiver appears on
the TV screen.
TV/VCR mode for DVD/VCR Combi
receiver is set to TV.
Press the TV/VCR button on the remote
control repeatedly to choose VCR mode.
TV indicator disappears in the display
window.
The video cable is not connected
Connect the video cable
picture.
cord into the wall outlet
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The equipment connected with the audio
cable is not set to receive DVD/VCR
Combi receiver signal output.
Select the correct input mode on the audio
receiver so you can listen to the sound from
the DVD/VCR Combi receiver.
The audio cables
Connect the audio cables
are
not connected
on
the TV.
securely.
securely.
The power of the equipment connected
with the audio cables is turned off.
Turn on the equipment connected with
the audio cables.
The
Set the
digital audio output
wrong position.
The
playback picture
is
poor.
The disc is
heads
Tape
is a rental
another VCR.
playback.
Clean video heads.
dirty.
are
digital audio output to the
correct position, then turn on the
DVD/VCR Combi receiver again by
pressing POWER.
Clean the disc.
dirty.
Tape
The DVD/VCR Combi
receiver does not start
is set to the
recorded
or was
on
Use
(v/V) for manual tracking
adjustment while tape is playing.
No disc is inserted.
No tape is inserted.
Insert a disc or tape. (Check that the
disc or tape indicator in the display
window is lit.)
An
Insert a playable disc. (Check the disc
type, color system, and Regional code.)
unplayable
The disc is
disc is inserted.
placed upside
The disc is not
placed
Place the disc with the
down.
within the
guide.
playback
Place the disc on the disc tray
inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
rating level.
Rating
side down.
or
correctly
change
the
Video Head Cleaning
Whenever a video cassette is inserted into or ejected from your VCR the video head is automatically cleaned.
This should mean that additional head cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become
blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old
or
damaged tapes might.
49
Symptom
Cause
Correction
This remote control
uses the same
buttons for VCR and
DVD functions
The remote control is not pointed at the
remote sensor of the DVD/VCR Combi receiver.
Point the remote control at the remote
sensor of the DVD/VCR Combi receiver.
The remote control is too far from the
DVD/VCR Combi receiver.
Operate
(7 m).
There is an obstacle in the path of the remote
control and the DVD/VCR Combi receiver.
Remove the obstacle.
The batteries in the remote control
exhausted.
Replace
(ex. PLAY).
are
the batteries with
(ex. PLAY).
Press PAUSE/STEP
during recording.
The DVD/VCR Combi receiver is in the
RECORD PAUSE MODE.
The tape will not rewind
or fast-forward.
The tape is
forwarded.
The playback picture
does not appear while
the tape is running.
If
Noise appears
visual search.
run
during
fast-
Check the tape.
the RF cable for
con-
Set the TV to the Video channel
rewound
nection.
(see
This is normal.
Turn camcorder
Breaks are noticeable
in Hi-Fi soundtrack.
There is no tape loaded, or the tape loaded
has had its record safety tab removed.
cannot be
The
started.
Tape-to-tape editing
not possible.
is
mode is
mode is
tracking
tracking
engaged.
engaged.
(another VCR, camcorder)
properly connected.
source
not been
recording
p.
17).
on
and operate
properly.
The automatic
The automatic
Timer
work.
to resume
recording.
Noise appears during
normal playback.
Recording
(X)
or
already fully
you're using only
new ones.
When using a VCR, first press the VCR
button. When using a DVD, first press
the CD/DVD button.
This remote control uses the same
buttons for VCR and DVD functions
The tape does not
the remote control within 23 ft
has
The clock/or the timer have been set
incorrectly.
won't
The timer is not
manual
tracking (see
p.
27).
Try
manual
tracking (see
p.
27).
Insert
adhesive tape,
cover the hole where the tab was
removed.
a
tape,
The loaded tape has had its record
tab removed.
safety
or
using
Confirm that the camcorder is
connected.
Re-perform
tings.
engaged.
Audio mode is not set
Try
properly
the clock and/or timer set-
Press POWER and confirm that the
timer indicator is displayed on the
DVD/VCR Combi receiver's Display.
Insert a pate with adhesive tape, or
insert a tape with the record safety tab
intact.
properly.
Select "STEREO" by repeatedly pressing AUDIO on the remote control.
No Hi-Fi sound.
Moisture Condensation
Moisture condensation
?
When the DVD/VCR Combi receiver is moved from
a
?
can occur:
cold
Under
place
to a warm
extremely
In locations where moisture condensation may
?
Keep the DVD/VCR Combi
power outlet with
sation.
place.
humid conditions.
?
plugged into an AC
POWER On. This will help prevent condenreceiver
When condensation has occurred, wait a few hours
for the DVD/VCR Combi receiver to dry before using
it.
50
occur:
Specification
General
Power
requirements
Power consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Refer to main label
Refer to main label
430X81X360mm(wxhxd)
5.8 kg (17.6 lbs)
5˚C to 40˚C
Timer
24-hour
RF Modulator
UHF 22
Operating humidity
5%to90%
(41˚F
to
104˚F)
display type
68 (Adjustable)
-
DVD Section
Semiconductor laser,
PAL/NTSC
Laser
Signal system
Frequency response
wavelength
650
nm
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto20kHz
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 65 dB
Harmonic distortion
Less than 1.0%
Dynamic
More than 60 dB
range
More than 60 dB
(analog
out connectors
only)
(DVD)
(CD)
Outputs
S-VIDEO OUT
(Y)
(C)
1.0 V
(p-p), 75 ohms, negative
(p-p) 75 ohms
0.3 V
sync, Mini DIN
4-pin
x
1
VCR Section
Head system
Television system
6 heads helical
azimuth system
PAL/SECAM colour system
PAL/MESECAM
format
Recording
scan
RF OUT
K
Tape speed
PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)
NTSC
Maximum
recording
time
Rewind time
Input
level
Output level
Signal-to-noise
ratio
(Playback only); 35.35 mm/s (SP), 16.67 mm/s (LP),
11.12 mm/s (EP)
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
AUDIO: -6.0 dBm, more than 10 kohms (SCART)
-6.0 dBm, more than 47 kohms (RCA)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
VIDEO: More than 43 dB
AUDIO: More than 72 dB
More than 42 dB
Dynamic
range
(Hi-Fi)
(Mono)
AUDIO: More than 85 dB
Tuner Section
Tuning
FM: 65.0
range
AM: 522
Intermediate
frequency
-
-
74.0
or
87.5
-
108.0 MHz
1611 kHz
FM: 10.7 MHz
AM: 450 kHz
Amplifier
Section
Stereo mode
Surround mode
90W+90W(6ohmat1kHz,THD10%)
Front: 90W + 90W (THD 10%)
Centre: 90W
Surround: 90W
+
Subwoofer: 150W
ohm at 1 kHz, THD 10%)
ohm at 30 Hz, THD 10%)
90W
(4
(6
51
Speakers
Satellite
(LHS-CX640T)
2
Type
Impedance
Frequency Response
Max
Net Dimensions
Input
Input
(W x
Net
Center
120
(1m)
Power
90W
Power
180W
H
104x233x120mm
D)
Weight
x
1.0
2
kg
Way
2
Speaker
6Ω
120
Sound Pressure Level
Max
Net Dimensions
Speaker
20,000 Hz
-
82 dB/W
speaker (LHS-CX640C)
Type
Impedance
Frequency Response
Rated
2
6Ω
Sound Pressure Level
Rated
Way
20,000 Hz
-
82 dB/W
Input Power
Input Power
(W x H x D)
Net Weight
(1m)
90W
180W
220x114x110mm
1.0 kg
Passive Subwoofer
(LHS-CX640W)
1
Type
Impedance
Frequency Response
Max
Net Dimensions
Input
Input
(W x
Net
1
Speaker
4Ω
40
Sound Pressure Level
Rated
Way
-
1,500 Hz
83 dB/W
(1m)
Power
150W
Power
300W
H
195x380x419mm
D)
Weight
x
6.6
kg
Accessories:
AM/FM antenna,
Design
and
Speaker
cable
specifications
are
Manufactured under license from
x
6, Scart RCA cable, Remote control
subject
to
change
52
are
1, Batteries (AAA)
Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol
trademarks of
x
2
without notice.
Laboratories.
"DTS" and "DTS Digital Out"
x
Digital Theater Systems,
Inc.
are
trademarks of
Dolby
P/N: 3834RH0064W
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement