LG | LH-RH3690X | Owner's Manual | LG LH-RH3690X Owner's manual

LG LH-RH3690X Owner's manual
LH-RH3690SE_NA8ULLX_ENG_MFL30582471
HDD/DVD
Recorder Receiver
System
OWNER'S MANUAL
MODEL:LH-RH3690X
(Main Unit: LH-RH3690
Speakers: LHS-36SE5S, LHS-36SE5A)
USB
Before connecting, operating or adjusting this product,
please read this instruction booklet carefully and
completely.
Internet address ;
http://ua.lge.com
(380-44) 490-7777,
Customer Information Center LG ;
8-800-303-0000
CAUTION
CAUTION
the Power Cord
concerning
Most
appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
CAUTION: THESE SERVICING
INSTRUCTIONS ARE FOR USE BY
certain.
QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC
CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE
QUALIFIED TO DO SO.
apparatus should
outlets,
damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement
part by an authorized servicer.
SERVICING OTHER THAN THAT
Caution: The
Do not overload wall outlets. Overloaded wall
loose
SHOCK DO NOT PERFORM ANY
not be
exposed to water (dripping or splashing)
and no objects filled with liquids, such as
vases, should be placed on the
apparatus.
or
Protect the power cord from
physical
or
mechanical
abuse, such as being twisted, kinked, pinched, closed in
a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the
appliance.
To disconnect power from the
cord plug. When installing the
plug
is
easily
mains, pull
product,
out the mains
ensure
that the
accessible.
SERIAL NUMBER:
You
can
find the serial number
This number is
CAUTION: This
product employs
a
Laser
retain this
To
Model No.
proper use of this product,
read this owner's manual carefully
ensure
on
the back of the unit.
to this unit and not available to
others. You should record
System.
please
unique
Serial No.
guide
as a
requested information here and
permanent record of your purchase.
______________________________
______________________________
and retain for future reference. Should
the unit
require maintenance,
contact
an
of your old
authorized service center.
Disposal
Use of
1. When this crossed-out wheeled bin
controls, adjustments, or the
performance of procedures other than
those specified herein may result in
symbol
product it means the product
by the European Directive
is attached to
is covered
hazardous radiation exposure.
appliance
a
2002/96/EC.
To prevent direct exposure to laser beam,
do not try to open the enclosure. Visible
laser radiation when open. DO NOT
STARE INTO BEAM.
2. All electrical and electronic
products should
disposed of separately from the
municipal waste stream via designated
collection facilities appointed by the
be
government
or
the local authorities.
3. The correct
WARNING: Do not install this
confined space such
similar unit.
a
as a
equipment
bookcase
or
in
will
disposal of your old appliance
help prevent potential negative
consequences for the environment and
human health.
4. For
detailed information about
disposal
appliance, please contact your
city office, waste disposal service or the
shop where you purchased the product.
more
of your old
2
Contents
Playback.............................26-36
.26-29
GenaralPlaybackFeatures
PlayingaDivXMovieFile.................30
.31
PlayinganAudioCDorMP3/WMAfile
Program Playback with Audio CD and
.
Introduction.............................4-9
SymbolUsedinthisManual................4
NotesonDiscs..........................4
.5
RecordableandPlayableDiscs
PlayableDiscs..........................6
RegionalCode..........................6
.6
Availability of copying or moving feature
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Abouttheinternalharddiskdrive
Playing media files using the USB host feature
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.7
.7
RemoteControlOperation.................8
RemoteControl.........................9
HookupandSettings...................10-25
RearPanel............................10
ConnectingtotheAerial..................10
ConnectionstoYourTV..................11
Accessory Audio/Video (A/V) Connections .12-13
.
RadioAntennaConnections...............13
.14
SpeakerSystemConnections.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MP3/WMAfile..........................32
.
FrontPanel.............................8
.
.
ViewingaJPEGFile..................33-34
.35-36
Editing a MP3/WMA, JPEG, DivX file
.
.
.
.
.
Recording............................37-43
AboutDVDrecording....................37
AboutHDDrecording....................37
Timeshift..............................38
BasicRecordingfromaTV................39
InstantTimerRecording..................39
TimerRecording........................40
.41
Checking Timer Recording Details
.41
RecordingfromanExternalInput
RecordingfromDVInput.................42
Simultaneous recording and playback
.43
MPEG4Recording......................43
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SpeakerPositioning.....................15
DelayTimeSetting....................16-17
SoundLevel...........................17
TestTone.............................17
XTS/XTSpro..........................17
UsingtheHomeMenu...................18
InitialSettings..........................18
GeneralSettings.....................18-21
AutoProgramming...................18
ProgramEdit........................19
AV1Decoder........................19
ClockSet..........................20
TVAspect..........................20
DisplayMode.......................20
ProgressiveScan....................20
Editing...............................44-51
Title List and Chapter List Menu Overview
.44
.45
HDD, VR Mode: Original and Playlist Editing
AddingChapterMarkers.................45
ChangingTitleThumbnails................45
MakingaNewPlaylist....................46
Adding Additional Title/Chapters to the Playlist .46
.47
Deleting an Original or Playlist Title/Chapter
DeletingaPart.........................47
NamingaTitle.........................48
.
.
.
.
.
.
.
TimeSearch...........................48
Sort.................................49
.49
Undoing/Redoing the Last Deletion
.
.
.
.
.
.
.
.
.
AV2Connection.....................20
.49
DivideOneTitlesIntoTwo................50
.50
CombiningTwoChaptersIntoOne
PowerSaveMode....................20
Initialization.........................21
MovingaPlaylistChapter.................51
HideaChapter/Title.....................51
LanguageSettings......................21
AudioSettings.........................21
DolbyDigital........................21
.21
DRC(DynamicRangeControl).
.22
Lock(ParentalControl)Settings
.22
Rating/SetPassword/AreaCode
DivXRegistrationCode...............22
RecordingSettings......................23
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
RecordModeSet....................23
RecordAspect.......................23
DVRecordingAudio..................23
TVRecordingAudio..................23
AutoChapter........................23
MPEG4............................23
AV2Recording......................23
DiscSettings........................23-24
DiscFormat........................23
Finalize/DiscLabel..................24
DiscProtect/PBC...................24
General
Explanation
of On-Screen
Display
.
.
.
.25
CombiningTwoTitlesIntoOne
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ProtectaTitle..........................51
Dubbing..............................52-54
BeforeDubbing.........................52
DubbingfromHDDtoDVD...............53
DubbingfromDVDtoHDD................53
.54
OneTouchCopy(HDDtoDVD).
.54
OneTouchCopy(DVDtoHDD).
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference............................55-61
AdditionalInformation....................55
OverwritingRecording.................55
Viewing Title List menu displayed on other
DVDRecordersorPlayers.............55
Playing Your Recordings on Other DVD
.55
Players(FinalizingaDisc).
LanguageCodes.......................56
.
.
.
.
.
.
.
.
.
.
.
.
AreaCodes...........................56
.57
PresettingtheRadioStations.
.
.
.
.
.
.
.
.
.
.
.
.
ListeningtotheRadio...................57
Troubleshooting......................58-59
Specifications.......................60-61
3
Introduction
About the
ensure proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
To
reference.
"
"
may appear on your TV display during
and indicates that the function explained in
operation
this owner's manual is not available
This manual
provides
information
on
the
operation
on
that
specific
media.
and maintenance of your recorder. Should the unit
require service, contact an authorized service location.
Symbol
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk of
electric shock.
Notes
on
Discs
Handling
Discs
Do not touch the
the
disc
on
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the disc.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
applicable only
symbol.
are
HDD
RAM
-RWVideo
following symbols
represented by the
the center out.
the HDD
All DVD discs listed below.
DVD-RW with VR
recording
DVD-RW with Video
mode
recording
mode
DVD+RW disc
-R
DVD-R disc
+R
DVD+R
DVD
on
of the
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
DVD-RAM disc
-RW VR
+RW
one
to the disc
Titles recorded
DVD ALL
the task easier.
making
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
(DL)
disc
DVD-Video disc
VCD
Video CDs
ACD
Audio CDs
DivX
DivX files
MP3
MP3 files
WMA WMA files
JPEG JPEG files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older
records.
Moisture Condensation
Never operate this product immediately after
moving it from a cold location to a warm location.
Leave it for two
If you
use
damage
4
vinyl
this
or
three hours without
product
in such
a
discs and internal parts.
operating
situation, it may
it.
Recordable and
DVD-RW
Video Disc
DVD-RW discs
These Discs
on
the
Discs
Playable
(Digital
-
ReWritable):
be formatted for VR mode
can
be recorded
can
on
recording or Video mode recording.
repeatedly. Recordings can be erased, then you can
record
again
Disc.
same
[VR mode]
Recordings can be extensively edited
Playable only on VR mode compatible players (after finalization)
[Video mode]
Playable on regular DVD players (after finalization)
Limited editing features
DVD-R
Video Disc
(Digital
These Discs
DVD-R discs
Recordable)
only once. After
-
be recorded
can
be
can
only
you finalize
formatted to Video mode.
a
DVD-R, you
cannot record
on
it
or
edit it.
Playable on regular DVD players (after finalization)
editing features
Limited
DVD-RAM (DVD Random Access Memory)
DVD-RAM discs can be formatted for VR mode recording.
These Discs can be recorded on repeatedly. Recordings can be erased, then you can record
the same Disc.
Playable on DVD-RAM compatible players.
Recordings can be extensively edited.
Only DVD-RAM standard Version 2.0, 2.1 and 2.2 discs can be used in this unit.
You cannot use the cartridge-type DVD-RAM disc in this unit.
-
DVD+RW
on
the
Video Disc
(Digital
These Discs
same
Playable
DVD+R
be erased, then you
can
can
record
again
DVD+RW
on
be
can
(Digital
These Discs
it any
ReWritable)
repeatedly. Recordings
on
on
Disc.
compatible players (automatically finalization)
playable on DVD+RW compatible players only
edited the title/chapter
The edited contents
Recordings
+
be recorded
can
again
are
Video Disc
+
Recordable)
only once. After
be recorded
can
you finalize
a
after finalization
DVD+R, you
cannot record
on
it
or
edit
more.
Playable on DVD+R compatible players (after finalization)
Any edited contents are not be compatible on DVD+R compatible players. (Hide, chapter combine,
added chapter mark, etc.)
Limited title/chapter editing features.
DVD+R DL
(Digital
These Discs
Video Disc
+ Recordable; Double Layer)
only once. After you finalize a DVD+R DL,
it
or
nearly doubled with double layer DVD+R media, allowing consumers to record
on a single DVD+R disc.
Playable on DVD+R DL compatible players (after finalization)
Any edited contents are not be compatible on DVD+R DL compatible players. (Hide, chapter
combine, added chapter mark, etc.)
Limited title/chapter editing features.
up
edit it any
Storage
be recorded
can
you cannot record
on
more.
space is
to 8.5GB of video
Recommended recordable DVD discs
DVD-R
Mitsubishi
(8x, 16x)
That's (8x, 16x)
Verbatim (8x)
DVD+R
DVD-RW
Mitsubishi
Mitsubishi
(8x, 16x)
Ricoh (8x, 16x)
Verbatim (8x)
DVD+RW
(4x)
Verbatim (4x)
JVC (4x)
V ictor (4x)
Maxell (4x)
--
--
Mitsubishi
(4x)
SONY (4x)
Imation (4x)
Maxell (4x)
Ricoh (4x)
DVD+R(DL)
(2.4x, 8x)
Maxell (2.4x)
Mitsubishi
-
DVD-RAM
Fujifilm (2x)
Mitsubishi (3x)
Maxell (5x)
-
-
-
-
Note:
If
a
DVD-RW/DVD+RW discs is recorded
using
this recorder. So if you want to
use
using
a
the disc
personal computer
on
this
or
recorder, you
other HDD/DVD Recorder
Receiver, you
must format the disc
the
using
original
cannot format the disc
recorder.
5
Playable
Discs
DVD(8cm/12cmdisc)
Discs such
Video CD
movies that
as
(VCD) (8
VIDEO CDs
or
cm
/ 12
be
can
cm
purchased
or
rented
disc)
CD-Rs/CD-RWs in VIDEO
CD/Super
VIDEO CD format
AudioCD(8cm/12cmdisc)
Music CDs
or
CD-R/CD-RW
CD-Rs/CD-RWs in music CD format that
(8
cm
/ 12
cm
can
be
purchased
disc)
CD-R/CD-RW discs that contain audio titles, DivX, MP3, WMA,
or
JPEG files.
Notes:
--
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself, some
played on the unit.
Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc.
Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). Doing so may result in malfunctions.
Depending on the recording software & the finalization, some recorded discs (CD-R/RW or DVD±R/RW) may
not be playable.
DVD-R/RW, DVD+R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder
may not play if the disc is damaged or dirty, or if there is dirt or condensation on the Recorder's lens.
If you record a disc using a personal computer, even if it is recorded in a compatible format, there are cases in
which it may not play because of the settings of the application software used to create the disc. (Check with
the software publisher for more detailed information.)
This recorder requires discs and recordings to meet certain technical standards in order to achieve optimal
playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types
of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain preexisting conditions (see above) to ensure compatible playback.
Customers should note that permission is required in order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such permission. Permission should always be sought from the
copyright owner.
Depending
on
CD-R/RW
--
--
--
--
--
--
--
the conditions of the
(or DVD±R/RW)
discs cannot be
Regional Code
This unit has
the
rear
Notes
a
regional
of the unit
on
or
Regional
code
printed
on
the
rear
of the unit. This unit
can
play only
DVD discs labeled
Codes
Most DVD discs have
a
globe
with
one or more
numbers in it
clearly
visible
on
the
cover.
This number must
match your unit's regional code or the disc cannot play.
If you try to play a DVD with a different regional code from the unit, the message "Incorrect
play back" appears on the TV screen.
Availability
of
copying
or
moving
region
code. Can't
feature
From
To
MP3/WMA
JPEG
DivX
Audio CD
Video CD
Title* 1
HDD
DISC
No
No
No
No
No
Yes
HDD
USB device
No
Yes
No
No
No
No
DISC
HDD
Yes
Yes
Yes
No
No
Yes
DISC
USB device
No
Yes
No
No
No
No
USB device
DISC
No
No
No
No
No
No
USB device
HDD
Yes
Yes
Yes
No
No
No
*1 The title is recorded from this unit.
6
same as
"ALL".
About the internal hard disk
Playing
drive
USB host feature
The internal hard disk drive
(HDD) is a fragile piece
equipment. Please use the recorder following the
guidelines below to protect against possible HDD
of
You
can
(JPEG),
in
an
media files
the media files such
enjoy
as pictures
(DivX) and tunes (MP3/WMA) saved
player or USB memory by connecting the
movies
MP3
failure.
storage device
We recommend that you back up your important
recordings onto DVD discs in order to protect against
1.
accidental loss.
Do not
move
Install and
the recorder while it is
use
the recorder
on a
on.
Press HOME
3.
Select
surface.
Do not block the
Do not
use
places,
changes
rear
vent/cooling
the recorder in
fan.
excessively
hot
or
humid
in
places that may be subject to sudden
in temperature. Sudden changes in
or
temperature
can cause
the recorder. This
can
1.
a cause
of HDD failure.
2.
the breaker switch.
Do not
move
the recorder
switching it off. If you need to move
please follow the steps below:
after
the recorder,
1. After the message POWER OFF is shown in the
display, wait at least two minutes.
2.
from the wall socket.
Unplug
MP3
are
a
The HDD is very delicate. If used improperly or in
an unsuitable environment, it is possible that the
HDD will fail after
a few years of use. Signs of
playback unexpectedly freezing
and noticeable block noise (mosaic) in the picture.
However, sometimes there will be no warning signs
problems
include
of HDD failure.
page 18.
is not
a
player.
installation of
player requiring
supported.
a
driver
USB Flash Drive: Devices that support USB2.0
USB1.1.
or
Notes:
Do not extract the USB device in
operating (play,
copy, move, etc.).
A back up demands to prevent a data damage.
This unit cannot play back the DivX file in the USB
USB device to
be lost.
[MOVIE] option.
supported.
Flash type MP3
Player:
device.
there is
not
The MP3
If there's
power failure while the recorder is on
chance that some data on the HDD will
or
on
Devices
3. Move the recorder.
a
the remote control.
require additional program
installation when you have connected it to
?
3.
immediately
on
Devices which
computer,
While the recorder is switched on, do not unplug
from the wall socket or switch the electricity off from
port of this unit.
[MUSIC], [PHOTO]
Details for the options are
Compatible
condensation to form inside
be
to the USB
Connect the USB device to the USB port of the
unit.
2.
stable, level
the
using
unit
(This
a
can
copy
or move
DivX file from
a
HDD.)
If you use a USB extension cable or USB hub, the
USB device might not be recognized.
This unit
only support USB 1.1.
using NTFS file system is not supported.
(Only FAT (16/32) file system is supported.)
can
A device
The USB function of this unit does not support all
USB devices.
Digital
camera
This unit is not
files is 1000
and mobile
supported
phone
are
not
supported.
when the total number of
or more.
If the HDD fails, no playback of recorded material
will be possible. In this case it will be necessary to
replace
the HDD unit.
7
Front Panel
a
b
c d efgh
i
a
Starts
or
OFF.
Pause
b Display
press
window
g
Shows the current status of the recorder.
REC: The recorder is
DVD bBHDD
MUTE: The
:
The recorder is
speaker
Indicates
:
,
h
i
Indicates sound mode is DOLBY PRO
:
DOLBY PRO LOGIC II.
or a
timer
recording
is
Opens
d
or
a
USB port of multimedia
(USB
etc.)
Tray
a
disc here.
Remote Sensor
Connect the DV output of
m
AV IN 4
a
digital
IN/AUDIO IN
(VIDEO
camcorder.
(Left/Right))
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
(Z)
Camcorder, etc.).
closes the disc tray.
n
HDD/DVD
Set the recorder's mode to HDD
e
options (up/down).
lDVIN
etc.
c
to set the
Point the recorder remote control here.
programmed.
: Indicates clock, total playing
time, elapsed time, title number, radio frequency,
volume, Surround, chapter/track number, channel,
OPEN/CLOSE
Disc
Insert
k
Indicates when the recorder is in timer
recording
menu
memory
j
repeatedly
USB host
Connect to
format of the current
disc.
or
Press
ADJUST
Selects
dubbing.
sound is muted.
encoding
z (REC)
recording.
recording time.
DVD: The recorder is DVD mode.
LOGIC
n
playback.
playback or recording temporarily,
again to exit pause mode.
Starts
recording.
HDD: The recorder is HDD mode.
D
m
fB/X(PLAY/PAUSE)
POWER
Switches the HDD/DVD Recorder Receiver ON
PLII :
kl
j
or
VOLUME CONTROL
Turn the knob clockwise to increase sound level,
counterclockwise to decrease sound level.
DVD.
x
(STOP)
Stops playback
or
recording.
Remote Control
Remote Control
Operation
Point the Remote Control at the remote
sensor
Battery
Installation
Remove the
and
battery
cover on
the
of the Remote Control, and
insert two R03 (size AAA)
rear
press the buttons.
batteries with
and
matched
correctly.
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
8
Remote Control
POWER
Turns HDD/DVD Recorder Receiver ON
and OFF.
FM/AM Tuner select
Select FM
or
AM band
choice.
(FM
the
as
and AM
listening
bands).
HOME
Accesses
the HOME
or removes
menu.
0-9 numerical buttons
Selects numbered
in
options
a menu.
TITLE
Displays
the disc's Title menu, if
available.
MARKER
OPEN/CLOSE
Opens
point during playback.
SEARCH
Marker Search
Displays
menu.
ZOOM
video
Enlarges
image.
MENU/LIST
Accesses
DVD
menu on a
disc,
Switches between Title
List-Original and
List-Playlist menu.
Title
DISPLAY
PIP
Selects PIP function
information while
Displays
program.
/
SKIP(-/+) (.
Go to next
beginning
chapter
or
>)
track. Returns to
of current
go to
chapter or track or
previous chapter or track.
SCAN(-/+) (m/M)
Search backward
or
forward.
PAUSE/STEP
Pause
playback
(X)
recording
temporarily.
or
PLAY
Starts
playback.
STOP
Stops playback
or
(B)
(x)
recording.
z REC
Starts
recording.
repeatedly to set
the recording time.
Selects the
mode:
recording
XP, SP, LP or EP.
TIMER REC
Displays
Copies
To
adjust
speakers
and off
DVD to HDD
a
the sound balance of the
from the listener's
position.
SUBTITLE
Selects
a
subtitle
language.
AUDIO/MO./ST.
Selects
an
audio
language.
Selects STEREO
-
or
MONO.
SOUND
Selects sound mode.
XTS pro
To
enjoy
more
natural and realistic
sound.
LEVEL/DELAY
-
To set the sound level of desired
channel.
-
To set the
in
delay time of each speaker
Dolby Digital and Dolby Pro Logic II
mode.
SETUP
Accesses
or removes
the
Setup
menu.
bBvV(left/right/up/down)
Selects
menu
options.
PR/PRESET(+/-)(v/V):
Select programme of TV
or
Radio.
MEMORY/ENTER
-
-
Confirms
Stores
a
menu
selections.
radio station's
frequency
in
the tuner's memory.
RETURN
(O)
Removes the
VOLUME
To
menu.
(+/-)
adjust speaker
volume.
(or
chapter
THUMBNAIL
Selects
a
thumbnail
Activates pause live TV/playback
(timeshift) for a live TV program.
menu.
INSTANT SKIP
temporarily.
Skips 15 seconds
playback.
DUBBING
CLEAR
HDD to
DVD).
marker when
playing/
recording.
REPEAT
Repeat chapter, track,
title
or
picture.
TIMESHIFT
MUTE
Timer Record
on
CHP ADD
Inserts
off.
Press
REC MODE
Turns the sound
on or
TEST TONE
Accesses On-Screen
Display.
viewing a TV
tray.
Changes the input to use for recording.
(Tuner, AV1, AV2, OPT, AV 3, AV4 or DV).
-
Marks any
and closes the disc
AV
Removes
a
mark
forward
during
the Marker Search
on
menu.
TV/DVD
To view channels selected
recorder tuner
or
by
by
the
the TV tuner.
all.
REPEAT A-B
Repeats
sequence between two
(A
points
B)
and
9
Hookup
and
Settings
Rear Panel
ab
c d
e
f
gh
ANT.IN
SCART
ij
a
klm
ANT.IN
h
AC Power Cord
i
RF. OUT
Connect the aerial to this terminal.
b
Plug
EURO AV 2 DECODER
Connect the audio/video output of an external
source (Pay-TV decoder, Set Top Box, VCR, etc.).
c
AV OUT
(VIDEO
Connect to
d
AV IN 3
a
/ AUDIO OUT
TV with video/audio
(VIDEO
IN/AUDIO IN
(Left/Right))
l
a
S-Video
Input
TV.
on
a
TV with SCART
jack.
VIDEO OUT SELECT Switch
Select either COMPONENT
or
RGB
signal of
depending
SYSTEM
EURO AV1 AUDIO/VIDEO terminal
Connect the SYSTEM CONNECTOR at the Active
how you connect the recorder to the TV.
Speaker.
f
from the AERIAL to your
EURO AV 1 AUDIO/VIDEO
Connect to
Camcorder, etc.).
signal
S-VIDEO OUT
Connect to
k
Connect the audio/video output of an external
source (Audio system, TV/ Monitor, VCR,
e
Passes the
source.
TV/monitor
j
(Left/Right))
inputs.
into the power
m
Connect
g Cooling
optical output
an
COMPONENT/PROGRESSIVE SCAN VIDEO
OUT
OPTICAL IN Connector
of
Digital
Device.
on
(Y
Pb
Connect to
Pr)
a
TV with Y Pb Pr
inputs.
fan
Connecting
to the Aerial
Rear of TV
Aerial
SCART INPUT
ANTENNA
INPUT
Remove the aerial cable plug from your TV set and
insert it into the aerial socket at the back of the
recorder.
socket
input
on
Plug
one
L
on
VIDEO
INPUT
R
end of the aerial cable into the TV
the recorder and the other end into the aerial
socket
AUDIO INPUT
R
your TV set.
RF coaxial connection
jack on the DVD Recorder
Receiver to the aerial input jack on the TV using the
ohm Coaxial Cable supplied (R). The RF. OUT jack
passes the signal through from the AERIAL jack.
ANT.IN
Connect the RF. OUT
75-
SCART
Rear of the HDD/DVD Recorder Receiver
10
Video connection
Connections to Your TV
Connect the VIDEO OUT
Make
on
the
When
of the
following connections, depending
capabilities of your existing equipment.
one
using
the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
jacks,
SCART
jack,
using
the
set the VIDEO OUTPUT SELECT
Tips
Depending on your TV and other equipment you
wish to connect, there are various ways you could
connect the recorder. Use only one of the
connections described below.
Please refer to the manuals of your TV, VCR,
Stereo System or other devices as necessary to
Caution
the recorder is connected
directly to the
input channel.
Do not connect the recorder's AUDIO OUT jack to
the phono in jack (record deck) of your audio
TV. Tune the TV to the correct video
(Left/Right)
using
Connection
right
the audio cables
AUDIO OUT
right
IN
jacks of the
jacks on the TV
(A). Do not connect the
jack to the phono in jack
(record deck)
of your audio system.
Component
Video connection
Connect the COMPONENT / PROGRESSIVE SCAN
VIDEO OUT
jacks on the recorder to the
corresponding input jacks on the TV using
cable (C).
a
high-definition
or
an
Y Pb Pr
"digital ready"
television, you may take advantage of the recorder's
progressive scan output for the highest video
resolution possible. If your TV does not accept the
Progressive Scan format, the picture will appear
scrambled if you try Progressive Scan on the recorder.
Set the
setup
Do not connect your recorder via your VCR. The
DVD image could be distorted by the copy
Note:
protection system.
jack on the recorder to the
using the video cable (V).
recorder to the audio left and
system.
[Progressive Scan] option to [ON] on
for progressive signal, see page
menu
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
the
20.
analog
video
S-VIDEO
connection.
Rear of TV
S-VIDEO
the TV
If your television is
make the best connections.
sure
on
recorder's AUDIO OUT
switch to SCART.
Make
Audio
jack
Connect the left and
set the VIDEO OUT
SELECT switch to COMPONENT. When
video in
SCART INPUT
INPUT
VIDEO
COMPONENT VIDEO INPUT
Y
S
T
INPUT
AUDIO INPUT
SCART connection
Pr
Pb
C
V
Connect the EURO AV1 AUDIO/VIDEO scart
jack
the recorder to the corresponding in
using the scart cable (T).
the TV
jacks
on
on
A
Optical Digital
Connection
Connect an optical output of DVD Player (or Digital
Device etc) to the OPTICAL IN connector on the
ANT.IN
recorder
using
the
optical
cable
(O).
Note:
When the
Optical jack is connected, audio will output
speakers of the main unit amplifier only but the
audio output is not available via the AV jacks.
SCART
from
Rear of the HDD/DVD
Recorder Receiver
o
Caution
Once the
setting for Progressive Scan output is
image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
entered,
OPTICAL
OUT
DVD
Player (or Digital
Device, etc)
recorder. First,
S-Video connection
Connect the S-VIDEO OUT
the recorder to the
S-Video in
S-Video cable
jack
on
the TV
jack on
using the
an
(S).
remove
the disc in the recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
standard
visible
setting,
on a
and
a
picture will once again be
analog TV or monitor.
conventional
11
Accessory Audio/Video (A/V)
TV
VCR, Cable Box, or
Satellite Tuner, etc.
Connections
Connecting
You
watch
can
PAY-TV/Canal Plus Decoder
a
or
record PAY-TV/Canal Plus
programmes if you connect a decoder (not supplied)
to the recorder. Disconnect the recorder's mains lead
from the mains when
To watch
or
the decoder.
connecting
record PAY-TV/Canal Plus programmes,
[AV2 Connection] option to [Decoder] (see page
20) and set the program's [Decoder On/Off] option to
[On] on the Setup menu (page 19).
set
ANT.IN
Tip:
You do not need to turn
signals
on
the recorder to view the
from the connected tuner
on
your TV.
Note:
SCART
If you disconnect the recorder's mains lead, you will
not be able to view the signals from the connected
decoder.
Rear of the HDD/DVD Recorder Receiver
Tip:
You do not need to turn
TV
signals
on
the recorder to view the
from the connected tuner
on
your TV.
Notes:
PAY-TV/Canal Plus
Pictures
Decorder
prohibit
containing copy protection signals
copying cannot be recorded.
that
any
If you pass the recorder signals via the VCR, you
may not receive a clear image on your TV screen.
Be sure to connect your VCR to the recorder and
SCART AV
your TV in the order shown below. To watch video
tapes, watch the tapes through a second line input
on
your TV.
Line
VCR
RECORDER
input
1
TV
Line
ANT.IN
input
2
When you record to a VCR from this recorder, do
not switch the input source to TV by pressing the
TV/DVD button
SCART
Rear of the HDD/DVD Recorder Receiver
DECODER
Connecting
jack
Connect
a
VCR
to the EURO AV2 DECODER
similar
EURO AV2 DECODER
To watch
or
DECODER
record the
recording device to
jack of this recorder.
source
the
from EURO AV2
jack, set [AV2 Connection] option to
[Others] (see page 20) and set [AV2 Recording] option
to [Auto], [CVBS] or [RGB] as required (see page 23).
12
the remote.
jack.
If you disconnect the recorder's mains lead, you will
not be able to view the signals from the connected
VCR
or
on
If you are using a B Sky B tuner, be sure to connect
the tuner's VCR SCART jack to the EURO AV2
or
tuner.
ConnectingtotheAVIN3orAVIN4
Connecting
Jacks
Connect the
input jacks (AV
IN 3, AV IN
4)
on
Using
the
using
jacks on your
audio/video cables.
Camcorder
Digital
the front
connect
recorder to the audio/video out
accessory component,
a
a
DV
panel DV IN jack, it is possible to
digital camcorder and digitally transfer
DV tapes to DVD.
Use
DV cable (not supplied) to connect the DV
jack of your DV camcorder to the front panel
jack of this recorder.
a
in/out
IN
DV
Note:
AUDIO
OUTPUT
This
only.
R
jack
is for connection to DV
It is not
compatible
with
digital camcorder
digital satellite tuners
Hokupand Setings
or
D-VHS video decks.
L
DV
VIDEO
OUTPUT
Rear of the HDD/DVD
Digital Camcorder
DV
IN/OUT
Front of the HDD/DVD
Recorder Receiver
Recorder Receiver
Front of the HDD/DVD Recorder Receiver
Radio Antenna Connections
Connect the
supplied
FM/AM antennas for
listening
to
the radio.
Connect the AM
loop
antenna to the AM antenna
connector.
Connect the FM wire antenna to the FM antenna
connector.
Notes:
To prevent noise pickup, keep the AM loop antenna
away from the HDD/DVD Recorder Receiver System
and other components.
Be
sure
After
to
fully
extend the FM wire antenna.
connecting
the FM wire antenna,
close to horizontal
as
keep
it
as
possible.
AM
GND
ANTENNA
FM
13
Connections
Speaker System
Connect the SYSTEM to the SYSTEM CONNECTOR
supplied System
Connect the
on
the
rear
of the Active Subwoofer
Speaker, using
the
cable.
speakers using
To obtain the best
possible
the
supplied speaker
surround sound,
cables.
adjust
the
speaker parameters (volume, distance, etc.).
AM
GND
ANTENNA
Notes:
Be
sure
to match the
If the cables
are
speaker cable to the appropriate terminal on the components:
reversed, the sound will be distorted and will lack base.
If you use front speakers with low maximum
the speakers.
on
14
input rating, adjust
the volume
carefully
+
to
+
and
--
to
--.
to avoid excessive
output
Speaker Positioning
In the
of normal
case
position
use
the 6
speakers (2
front
1 center
speakers,
speaker,
2
rear
speakers
and
subwoofer).
If you want to
subwoofer.
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
a
?
?
Front speakers
According to your listening position set up
interval between speakers to 45 degree.
Center
speaker
speaker
The center
and front
speakers
the
speakers
ideally
are
the
for
equal
same
distance. And
height.
But
set up the
by hearing position
normally place
it above
or
Hokupand Setings
below the
television.
?
Rear
speakers
right
Place left and
behind the
listening
area.
These
speakers
recreate sound motion and
for surround sound
playback. For best results, do not install the rear speakers too far
position and install them at or above the level of the listener's ears. It is also effective
speakers towards a wall or ceiling to further disperse the sound.
In the
?
of
case
other, and
a
smaller
set the
rear
room
size, if the audience is
speakers
above 60
-
90
cm
near
to the
rear
than the listener's
wall set the
rear
atmosphere required
behind the listening
to direct the
rear
speakers opposite
each
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Front
Speaker
(Left)
Center
Speaker
Front Speaker
(Right)
Rear
Speaker
(Left)
Rear
Speaker
(Right)
Speaker Positioning Example
15
Time
Delay
Setting
In Dolby Digital or Dolby Pro Logic mode it is
assumed that the distance from the listener to each of
the
is
speakers
If not then
equal.
times of the center or
heard simultaneously
setting the delay
speakers the sound will
rear
be
by the listener.
The interval from the speakers to the listener. If the
distance from the listener to each speaker is the
same, in the Dolby Digital and Dolby Pro Logic mode
the delay time of each speaker is as follows
In
Dolby Digital mode
Center delay time : 0
5ms
Rear delay time: 0
15ms
In Dolby Pro Logic mode
Center delay time : cannot be set
If the rear delay time is set in Dolby Digital mode, in the
Dolby Pro Logic mode the delay time will be
automatically set.
The delay time is 1 msec per 30 cm.
If the Center and rear speakers are further than the
front speakers from the listener, the delay time will be
~
Center
time
delay
setting (Dolby Digital
mode
only)
If the distance of DF is
equal to the distance of DC in
figure, set the Center Delay Time as 0ms.
Otherwise, change the setting according to the table
the left
below.
Ex)
If the distance from the front
speakers to the
speaker to the
listener is 3m and from the center
listener is 2.4m, the center delay time is 2msec.
(DF) 2.4m (DC) 60cm (A)
3m
=
-
60cm
(A)
/ 30cm
2msec
=
~
at minimum.
(A)
L
R
C
DC
Setting the delay time in the Dolby Digital
Dolby Pro Logic (II) mode
and
1.
Press LEVEL/DELAY twice.
The current surround
delay
time appears in the
Display
Window.
2.
Press
3.
If
/
setting
to
is
the
change
time.
delay
press LEVEL/DELAY.
complete,
Note:
You
can adjust the center delay time only in the
Dolby Digital mode and its delay time appears.
DF
SW
Setting
DS
SL
SR
(B)
the Sound Effects in the Music
mode of
1.
Pro
Dolby
Press SOUND
Logic (II)
repeatedly
to select the Music
mode.
Each time you press these buttons, the sound
changed in the following order;
mode is
Surround
time
delay
If the distance of DS is
setting
longer than the DF
in the left figure, set the Surround Delay Time as 0ms.
Otherwise, change the setting according to the below.
Ex) If the distance from front speakers to the listener
is 3 m and from rear speakers from the listener is 1.5
m, in the Dolby Digital mode the rear delay time is 5
equal
to
PRO LOGIC
→
PLII MOVIE
→
PLII MUSIC
PLII MATRIX→ HALL 1→ HALL 2
or
BYPASS
2.
→
→
THEATER
→
...
Press LEVEL/DELAY twice.
The current surround
delay
time appears in the
Display
Window.
msec.
3m
(DF)
(B)
1.5m
In
-
1.5m
=
(DS)
=
1.5m
150cm / 30cm
Pro
=
(B)
3.
II
Dolby
Logic (Surround delay time):
Logic: 15 30msec
Pro
Matrix: 0
/
to select
a
desired Sound mode.
PANO
y
C WIDT
y
/
button, it is changed
DIMEN...
~
Movie: 10
Music: 0
Press
Each time you press the
in the following order;
5msec
25msec
~
15msec
4.
Press
/
to
~
15msec
change
the steps.
~
CWIDT:0~+7
DIMEN: -3
+3
~
PANO: ON/OFF
5.
16
If
setting
is
complete,
press LEVEL/DELAY.
PANO
Test Tone
(PANORAMA)
This control extends the front stereo
image to include
the surround speakers for an exciting "wraparound"
effect with side-wall imaging. It is particularly effective
for recordings which have strong left- or right-channel
This function allows you to can easily adjust the sound
balance of the speakers from the listener's position.
Select the test tone mode
1.
elements in the mix, as these are detected and
accentuated by the Panorama process.
C WIDT
A hiss noise
speakers
forward, and steps --1, --2, and --3
or
the
rear.
This
You
can adjust the sound level while the test tone is
operating. First press LEVEL/DELAY then press the
2.
/
buttons,
speakers
?
If
3.
move
the sound
setting
is
so
same
test
that the sound level from all the
from the listener's
position.
tone, if you adjust the sound level, it will
in the current
complete,
speaker
channel.
press TEST TONE.
XTS/XTS pro
Each time you press XTS pro the
following order.
Press LEVEL/DELAY
on
the remote control.
The level indicator will appear in the
/
to select
a
desired
Each time you press the
in the
/
Display
XTS-PRO ON
FL
speaker
to set.
button, it is changed
C (Center)
FR (Front Right)
(Front Left)
SL (Surround Left)
(Surround Right)
SW (Subwoofer)
FL (Front Left)
→
→
→
channel.
/
...
adjust the
(-6dB +6dB)
sound level of the selected
2-3 and
the sound level of the
to
~
Repeat step
adjust
other channels.
setting
→
→
→
Press
is
→
XTS ON
→
NORMAL
sound quality of the LG Technology
optimum sound for you to play the
perfect playback of the original sound and to feel
living sound source.
unique
complete,
press LEVEL/DELAY.
the
XTS ON
Window.
following order;
SR
in
creates the
set the sound level of the desired channel.
Press
setting changes
the
XTS-PRO ON
Sound Level
If
is
During the
be paused
The
5.
...
can
towards the surrounds.
4.
→
→
the
gradually adjust
to
user
help achieve the desired balance from all
the speakers with certain recordings that may contain
either too much or too little spatial effect. Step "0" is the
recommended setting, which has no effect on the
sound. Steps 1, 2, and 3 gradually move the sound
3.
→
→
be useful to
2.
following order;
→
→
sound field either towards the front
1.
TEST TONE.
(DIMENSION)
This control allows the
can
by pressing
out for 2 seconds from each
C (Center)
FR (Front Right)
(Front Left)
SR (Surround Right)
SL (Surround Left)
SW (Subwoofer)
FL (Front Left)
(Center Width)
positioned between the center speaker and the left/right
speakers over a range of eight steps. Step "3" uses a
combination of all three front speakers to give the best
vocal imaging and most seamless soundstage
presentation, and is recommended for most recordings.
Step "0" places all center sound in the center speaker.
Step "7" places all center sound equally in the left/right
speakers, just as in conventional stereo.
You
in the
FL
This control allows center-channel sounds to be
DIMEN
comes
When
playing the movie with the weak bass sound
relatively to the general music, it enforces the sense
of sound at woofer for you to satisfy with.
In the mode of 2 CH BYPASS, It creates the high
display effect by playing the sound source via the
rear speakers same as the front speakers.
Note:
The XTS mode is
temporarily disabled when
changing from 2.1 CH to 5.1 CH and it is enabled
when changing it to 2.1 CH.
NORMAL
XTS-Pro and XTS mode tune off
17
Using
From the Home Menu
Media for
General
the Home Menu
playback
screen
and
you
recording
can access
1.
Press HOME to
2.
Use the b / B buttons to select
want. Sub
display
options
all the
of the recorder.
the Home Menu
a
main
screen.
option
sub
option
Press SETUP and the
2.
Use v / V to select the desired
3.
While the desired item is selected, press B to
move to the second level.
4.
Use v / V to select the second desired
5.
Press B to
6.
Use v / V to select the desired
you
appears.
Use the v / V and ENTER buttons to select the
3.
Operation
1.
you want.
move
Setup
menu
appears.
option.
option.
to the third level.
setting
then press
ENTER to confirm your selection.
Some items require additional steps.
Press SETUP to exit the
7.
Setup
menu.
Note:
Press b to go back to the
To exit the HOME menu, press HOME.
4.
General
TV
TV HDD: Returns to live TV
viewing
Auto
TV DVD: Returns to live TV
viewing
level.
Settings
for HDD
recording.
previous
Programming
for DVD
This recorder is
recording.
synthesized
MOVIE
equipped with a frequency
capable of receiving up to
tuner
88 TV
channels.
HDD:
HDD.
(page 44)
HDD Divx:
Displays the Title List menu for
Displays the [Movie List]
(page 30)
menu
for HDD.
Preparation:
Connect the recorder to the desired type of aerial,
as shown in Connecting to the Aerial on page 10.
DISC:
Displays Title List menu for recordable disc (page 44)
Displays [Movie List] menu for DivX disc.
(page 30)
Plays back Video CD or DVD-Video disc
(page 26-29).
USB Divx: Displays the [Movie List] for USB device
(page 30)
-
-
-
PHOTO
(See page 33)
Displays [Photo List] menu for HDD.
DISC: Displays [Photo List] menu for disc.
USB: Displays the [Photo List] for USB device.
HDD:
1.
Select the
2.
Press B to
[Start]
MUSIC
(See page 31)
HDD: Displays [Music List] menu for HDD.
DISC: Displays [Music List] (or Audio CD) menu
3.
SETUP
Start:
[Music List]
(See page 18)
Displays Setup
Initial
In this
the
After you have connected your recorder for the very
first time. If you press SETUP for initial setting, you
can only set the [Auto Programming] option. Then you
are
several ways to
settings provided. Most menus consist
of three levels to set up the options, but some require
greater depth for the variety of settings.
18
in
Note:
menu.
system, there
customize the
begin the channel search.
automatically cycle through all
channels in the area and place them
the tuner's memory.
for USB device.
Settings
menu
to the third level.
highlighted.
Press ENTER to
available
Displays
move
icon is
The tuner will
for
disc.
USB:
[Auto Programming] option.
can
set the other
options.
Program
You
edit
can
move,
Program
Edit
channel
a
manually (add, delete,
name,
1.
Select
Press ENTER while
The
[Program Edit] option
Program
List
[Edit]
menu
Edit
perform a search to select and store TV
manually.
When you select [Program Edit] in step 4 above, the
display for setting channels appears.
can
channels
etc.).
2.
You
then press B.
is selected.
1.Useb/Btoselecttheitemandpressv/Vto
change the setting.
appears.
[PR]
indicates the selected programme
Hokupand Setings
position.
[Seek] Searches for a channel automatically.
Searching stops when the recorder tunes in a
channel.
3.
Use v / V to select
a
PR number then press
4.
Use v / V to select the program
ENTER.
option
[MFT] Fine
picture.
then press
[Program Edit] Sets the channel manually.
"Program Edit" on the right.
the channel number.
[Ch.] Changes
ENTER.
See
tunes the channel to obtain
[Station Rename] Changes the station name.
display for entering characters appears.
AV1 Decoder
To enter characters, see page 48.
Names can be up to 5 characters long.
Sets the EURO AV1 AUDIO/VIDEO
[Delete]
Disables
a
programme
encoded video
position
you do
not need.
[Decoder On/Off]
Sets the channels for the
setting
to watch
Press ENTER
inputting
Press ENTER
Press ENTER
Inputs
Program
List
menu
appears.
[Canal+] appears on the display.
again to turn off the setting.
so
the
signals from the EURO AV1
jack. Normally select this.
to turn off the
signal input from the
jack is output to the
EURO AV2 DECODER jack for decoding.
The decoded signal is then input back through
the EURO AV2 DECODER jack so you can
EURO AV1 AUDIO/VIDEO
or
view PAY-TV/Canal Plus programmes.
Sets the channels for the
NICAM broadcast.
display.
Press AV while the
record
[NICAM Auto/off]
the
again
for
On: The encoded video
or
record PAY-TV/Canal Plus programmes.
Press ENTER so [Decoder] appears on the
display.
setting.
1.
2.
Off:
jack
signals.
AUDIO/VIDEO
decoder. You need this
clearer
2. Choose OK then press ENTER to confirm the
setting and returns to the Program List menu.
The
[Move] Sorts the programme positions on the
Program List. Press v / V to move the selected
programme position to a new location.
a
is lit
Normally, [NICAM]
on
If the sound from NICAM broadcast
is not clear, press ENTER
so
[NICAM]
disappears.
5.
Press RETURN
List
(O) repeatedly
to exit
Program
menu.
19
Clock Set
Progressive
1.
Select
2.
Enter the necessary information for date and time.
b / B (left/right): Moves the cursor to the previous
or
[Clock set] option
then press B.
next column.
v / V
the
setting
Press ENTER to confirm your
setting.
(up/down): Changes
cursor position.
at the
current
3.
TV
Aspect
Selects the aspect ratio of the connected TV
standard or wide).
[4:3]
Select this when
TV. When you select
below.
TV
TV with
Display
when
[4:3]
connecting
to
a
wide-screen
wide mode function.
a
is selected in
the upper and lower
a
wide
picture
[TV Aspect].
wide
portions
picture
of the
[Pan Scan] Automatically displays
the entire
screen
is set to SCART
position.
Once the
setting for Progressive Scan output is
image will only be visible on a
Progressive Scan compatible TV or monitor. If you set
Progressive Scan to [ON] in error, you must reset the
entered,
an
recorder. First,
display
[Letter Box] Displays
not fit.
panel
Mode
Selects how to
Scan will be disable in the setup menu
on the rear
Progressive
when the VIDEO OUT SELECT switch
Caution
Select this when
a
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, but are connecting the
recorder to a standard (analog) television, set
Progressive Scan to [OFF].
If you are using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks for connection to a TV or
monitor that is compatible with a progressive scan
signal, set Progressive Scan to [ON].
Note:
(4:3
connecting to a 4:3 screen
[4:3], set [Display Mode]
[16:9]
or
Scan
and cuts off the
a
on
the
screen
with bands
standard
on
remove
visible
setting,
on a
and
a
wide
picture
on
picture will once again be
analog TV or monitor.
conventional
screen.
portions
the disc in the recorder. Next,
press STOP (x) and hold it for five seconds before
releasing it. The video output will be restored to the
AV2 Connection
that do
You
can
connect
a
decoder
or
EURO AV2 DECODER socket
on
the back.
if you connect the
recorder's EURO AV2 DECODER jack to a PAY-TV
[Decoder]
or
Select
other device to the
[Decoder]
Canal Plus decoder.
Select [Others] if you connect the
recorder's EURO AV2 DECODER jack to a VCR
[Others]
similar
recording
or
device.
Power Save Mode
You
can
mode.
set up the unit into
Nothing
is
displayed
an
economic power save
display window
in the
when the unit is turned off.
[OFF]
[ON]
Power Save Mode is not active.
Power Save Mode is active.
Notes:
The encoded television
PREMIERE)
are
signals (CANAL+
or
not decoded in the Power Save
Mode.
The Power Save Mode is not available in the
standby
mode for the timer
recording
and when
power off of the unit after receiving the encoded
television signals (CANAL+ or PREMIERE).
20
Initialization
You
can
Audio
Settings
reset the recorder to its
original factory
or USB Memory.
settings and initialize the HDD
[Factory Set] If you need to, you can reset the
recorder to all its factory settings. Some options
cannot be reset. (Rating, Password, and Area
Code)
[HDD format] Initializes
everything recorded on
[USB format]
recorded
on
the HDD
(Hard
Disk
Initializes the USB device.:
the
Drive):
the HDD will be erased.
Memory
everything
1.
Select
2.
Press v / V to select the desired
[Initialization] option
then press B.
then press
option
ENTER.
The confirm message will appear.
3.
Use b / B to select
Hokupand Setings
will be erased.
[Yes]
or
[No]
then press
Dolby Digital
[Bitstream]: Select "Bitstream" when enjoying
original Dolby Digital Audio (Set to this mode
ordinary).
[PCM]: DVDs encoded in Dolby Digital will be
automatically downmixed to two-channel PCM
ENTER.
audio.
Language Settings
DRC
(Dynamic Range Control)
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Then, you may listen
without
losing clarity
to
a
movie at
a
lower volume
of sound. Set DRC to
[ON]
for
this effect.
Display
Select
a
Menu
language
for the
Setup
menu
and
on-screen
display.
Disc Menu/Audio/Subtitle
[Original]Refers
the disc
was
to the
original language
in which
recorded.
language, press number
corresponding
4-digit number according to the language code list
in the reference chapter (see page 56). If you enter
the wrong language code, press CLEAR.
[Others]
To select another
buttons then ENTER to enter the
[OFF](for
Disc
Subtitle)
:
Turn off Subtitle.
21
Lock
(Parental Control) Settings
Set Password
1.
Select
2.
Follow step 2 as shown "Rating".
To change the password, select the
[Set Password] option
then press B.
[Change],
press ENTER and input the new 4-digit code then
press ENTER. Input it again to verify.
To delete the
select
password,
then press
[Delete]
ENTER.
If you
forget your 4-digit
code
If you
forget your password, to clear the
password, follow the procedure below.
Rating
Blocks
1.
playback
of rated DVDs based
content. Not all discs
are
on
their
Display Setup
Select
2.
To
[Rating] option
access
the
features, you
[Yes]
password is
then press B.
Rating, Password and Area Code
input the 4-digit security code
must
security
4-digit
a
code you
code and
press ENTER. Enter it again and press ENTER to
If you make a mistake before pressing
Enter the code of
"Area Codes", page
whose standards
disc, referring
2.
Follow step 2
3.
Select the first character
a
rating using
the v / V buttons.
[8]: Rating one (1) has the most restrictions
rating eight (8) is the least restrictive.
If you select [No Limit], parental control
is not active and the disc plays in full.
rating
scenes
Shift the
4.
same
a
on
rating
the disc. The alternative must have the
or a
lower
one.
found, playback stops. You
password
or
change
the
If
no
suitable alternative is
must enter the
rating
as
shown
then press B.
"Rating".
the v / V
using
cursor
using B buttons and select
using v / V buttons.
the
second character
Press ENTER to confirm your
5.
DivX
rating for the recorder, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
[Area Code] option
area
code selection.
selection.
Note:
If you set
the same
(See
buttons.
[No Limit]:
Press ENTER to confirm your
used
were
to the list
56.).
ENTER, press CLEAR.
and
4.
an area
to rate the DVD video
Select
-
6-digit
Area Code
1.
[1]
1 level icon.
then press ENTER. The 4-digit
cleared. Enter a new code.
verify.
Select
an
number "210499".
rated.
you created.
If you have not yet entered a
are prompted to do so. Input
3.
then select
2. Use the Number buttons to enter the
3. Select
1.
menu
current
4-digit
play
level in order to
Registration
We
DivX
Code
VOD (Video On Demand)
you the DivX
code that allows you to rent and purchase
provide
registration
using
videos
the DivX
VOD service. For
more
information, visit www.divx.com/vod.
1.
Select
2.
Press ENTER while
the disc.
[DivX Reg. Code] option
registration
3.
Use the
[View]
then press B.
is selected and the
code will appear.
registration
videos from Divx
code to
purchase
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
download the video onto
a
disc for
playback
on
this unit.
Note:
All the downloaded videos from DivX
be
22
played
back
on
this unit.
VOD
can
only
MPEG4
Recording Settings
When HDD
you can set the video recording
MPEG4. If you want to record a
recording,
format to MPEG2
or
video with MPEG4 format, select [ON]. When this
choice is made, this unit will record the video with
MPEG4 format
on
the HDD.
[OFF] For MPEG2 recording in HDD mode
[ON] For MPEG4 recording in HDD mode
AV2
You
video
Record Mode Set
You
XP
LP
set the
Record
recording,
input signal
will
automatically
follow
signal received.
[CVBS] Only for recording CVBS input signal.
[RGB] Only for recording RGB input signal.
Disc
can
you
aspect ratio to suit the material
or
The video
the video
Aspect
When DVD
Hokupand Setings
select the type of the signal when recording
from the device connected to the
input signal
EURO AV2 DECODER socket.
[Auto]
picture quality for recording;
(High Quality), SP (Standard Quality),
(Low Quality), EP (Extend Quality).
can
Recording
can
set the
recording
you're recording (16:9
Settings
Disc Format
If you load a completely blank disc, the recorder will
initialize the disc.
4:3).
DVD-R: The recorder initialize the disc to Video
DV
Recording
mode. The
Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV
IN
jack.
digital
Some
mode will
recording
always
be Video
mode.
DVD-RW/DVD+RW/DVD+R(DL)/DVD-RAM: The
Initialize menu will appears. Select [OK] then press
ENTER. DVD-RW disc is initialized to Video mode.
camcorders have two stereo tracks for
audio. One is recorded at the time of
shooting;
shooting.
other is for
the
Also, you
can
reformat the DVD-RW/DVD+RW/
DVD-RAM from the
overdubbing after
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is
Setup
menu as
below.
used.
TV
Recording
When TV
Audio
recording
with
bilingual,
you
can
choose
audio channel to record.
[Main+Sub] Main language
[Main] Main language only
[Sub] Sub language only
and Sub
language
1.
Select
2.
Press ENTER while
3.
Use b / B to select
Format Disc
Video
Auto
When
Chapter
recording in Video mode, chapter
specified setting. You can change
markers
with the
is selected.
appears.
a
desired mode
(VR
Mode
or
or
[None] setting.
Mode)
For DVD+RWs, go to step 4.
are
this interval to
15 minutes. If you select
switch off automatic chapter marking
[None],
altogether
menu
[Start]
then press ENTER.
Confirm message will appear.
put in
minutes, 10 minutes
5
then press B.
[Disc Format] option
4.
Use b / B to select
It takes
a
[OK] then press ENTER.
few moments to initialize the disc.
Caution
If you want to change the disc format,
recorded on the disc will be erased.
everything
23
Finalize
Disc Label
recordings in place so that the
played on a regular DVD player or
computer equipped with a suitable DVD-ROM drive.
Finalizing a Video mode disc creates a menu screen
for navigating the disc. This is accessed by pressing
Finalizing
disc
can
'fixes' the
Use this to enter
be
MENU/LIST
The disc
see
Caution
Once you have finalized a DVD-R and DVD+R disc,
you cannot edit or record anything else on that disc
except DVD+RW. However, you
DVD-RW disc
can
record and edit
for the disc. This
name
display
be up to 32 characters long.
on a different recorder, you will
limited character set.
name can
For discs formatted
TITLE.
or
a name
appears when you load the disc and when you
disc information on-screen.
only
a
1.
Select
2.
Press ENTER while
[Disc Label] option
Keyboard
a
menu
[Edit]
then press B.
is selected.
appears.
To enter characters,
see
page 48.
by choosing [Unfinalize] option.
Disc Protect
When
recording
in DVD-RAM / DVD+RW / +R disc
or
VR mode formatted DVD-RW disc, set to [ON] to
prevent accidental recording, editing or deleting of the
disc loaded. If you need to unlock the disc to make
edits, select [OFF].
PBC
Select
1.
Press ENTER while
2.
Finalize
menu
PBC stands for
then press B.
[Finalize] option
[Finalize]
is selected.
appears.
[OK] then press ENTER.
The recorder starts finalizing the disc.
How
long
finalization takes
depends
number of titles
on
DVD+R DL disc
can
on
on
the type of
the disc, and the
the disc.
take up to 30 minutes to
Tips
If you load
a
DVD-RW that has
can
can
edit and re-record onto the disc.
You cannot unfinalize
If
[Disc Protect] option
not available. To
[OFF].
24
already been
by choosing
menu. After doing this,
'Unfinalize' it
Unfinalize from the Finalize
a
DVD-R and DVD+R disc.
is set to
finalize,
set
Video CDs
[OFF]
finalize.
finalized, you
Playback Control and refers to special
navigation features that are available on
Video CDs.
CDs.
disc, how much is recorded
and
are
played according
to the
PBC, if
available.
Note:
you
some
[ON]
Select
3.
menus
[ON], the finalize is
[Disc Protect] option to
Video CDs
are
played
the
same
way
as
Audio
General
Explanation
On-Screen Display
This manual
of
Displaying
You
loaded
operating the
recorder. Some DVDs require specific operation or
allow only limited operation during playback. When
this occurs, the symbol
appears on the TV screen,
indicating that the operation is not permitted by the
recorder
or
gives
basic instructions for
is not available
Displaying
on
the disc.
Information While
can
Watching
1.
2.
Press DISPLAY
once
to show current status.
Press DISPLAY
once
again
to show various
information.
The items
During viewing the TV, press ENTER or DISPLAY
to display/remove the information displayed
on-screen
various information about the disc
on-screen.
playback
TV
Disc Information
display
displayed differ depending
playing status.
type
or
You
can
on
Hokupand Setings
the disc
on-screen.
Indicates channel number, station name, and
audio signal (STEREO, MONO) received by
the tuner.
Indicates the record mode,
free space, and elapsed
time progress bar.
Indicates disc
name
and format.
3.
change
select
or
an
item
select the
by pressing v / V and
setting by pressing b / B.
For details about each item,
see
the pages in
parentheses.
(or track) number/total
(or tracks) (page 26, 28)
[Chapter]: Current chapter number/total number
of chapters (page 26)
[Time]: Elapsed playing time (page 28)
[Audio]: Selected audio language (DVD VIDEO
only) or audio channel (page 27)
[Subtitle]: Selected subtitle (page 27)
[Angle]: Selected angle/total number of angles
(page 28)
[Title]:
Current title
number of titles
Indicates current date and time.
Note:
If no button is pressed
display disappears.
for 10 seconds, the
on-screen
25
Playback
General
Features
Playback
1.
Load your chosen disc in the tray, with the
2.
Starts
3.
To stop the playback, press STOP (x).
The unit records the stopped point, depending
playback using
Press PLAY
("x"
4.
(N)
appears
on
to
the
HOME
menu
(see
playback
page
side down.
18).
on
the disc. "Xx" appears
playback (from the scene point). If you
screen.), the unit will clear the stopped point.
resume
Press OPEN/CLOSE
Press OPEN/CLOSE
(Z)
(Z)
to
remove
on
the
press STOP
screen briefly.
(x) again or unload
the disc
the disc.
to close disc
tray
or
press POWER
(1),
the disc tray closes
automatically
and unit
turns off.
Note:
If Parental Control is set and the disc is not within the
Rating settings (not authorized),
(see "Rating", on page 22).
entered and/or the disc must be authorized
Buttons
PAUSE/STEP
(Z)
(X)
Opens
or
All Discs
closes the disc tray.
During playback,
playback.
press PAUSE/STEP
Press PAUSE/STEP
(X) repeatedly
to
(X)
All Discs
to pause
play Frame-by-Frame.
Tip:
You
can advance or back up the picture frame-by-frame by
pressing b / B repeatedly during PAUSE mode.
The picture frame-by-frame in reverse is not available for
Video CD.
SKIP
(.
/
>)
During playback, press SKIP (. or >) to go to the next
chapter/track or to return to the beginning of the current
chapter/track.
Press SKIP . twice briefly to step back to the previous
chapter/track.
Tips:
To go directly to any chapter during DVD playback, press
DISPLAY twice and press v / V to select the chapter
icon. Then, input the chapter number or use b / B.
an Audio CD, to go directly to any track, enter the
track number using the numbered buttons (0-9) during
On
playback.
SCAN
(m
/
M)
During playback, press SCAN (m
select the required scan speed.
or
M) repeatedly
to
HDD, DVD; 5 steps
DivX; 4 steps
Video CD, Audio CD; 3 steps
While the
playback is paused, press
repeatedly to play in slow motion.
SCAN
(m
or
M)
HDD, DVD; 4 steps
Video CD; 3 steps
ZOOM
buttons.
26
(Forward only)
During playback or pause mode, press ZOOM to enlarge
the video image.
x2 size
x4 size
x1 size (normal size)
(x1 size
You can move through the zoomed picture using bBvV
→
4-digit
Discs
Operations
OPEN / CLOSE
the
→
→
code must be
General
Features
Playback
(Continued)
Buttons
Operations
REPEAT
press REPEAT repeatedly to select
desired repeat mode.
HDD (Title/Off), DVD (Chapter/Title/Off)
Discs
During playback,
VR mode DVD-RW
a
(Chapter/Title/All/Off)
Video CD, Audio CD (Track/All/Off)
MP3/WMA (Track/Folder/Off)
Notes:
On
Video CD with PBC, you must set PBC to [OFF] in the
menu to use the Repeat function. See page 24.
If you press SKIP (>) once during Repeat Chapter
a
Setup
(Track) playback,
REPEAT A-B
the repeat
playback
cancels.
During playback, each press of REPEAT A-B button to
select point A and point B and repeats a sequence from
point A (Starting point) to point B (End point).
Note:
HDD
During
playback,
you cannot select
a
sequence less
than 5 seconds.
TITLE
If the current DVD title has
on
MENU/LIST
SUBTITLE
(
AUDIO
the
The disc
)
a
menu, the title
Otherwise, the disc
screen.
menu
appears
on
the
menu
menu
appears
may appears.
screen.
During playback, press SUBTITLE then press b
repeatedly to select a desired subtitle language.
/ B
Press AUDIO then press b / B repeatedly to hear
language or audio track.
a
different audio
Press AUDIO then press b / B repeatedly during playback
a different audio channel (STEREO, LEFT or
to hear
RIGHT).
With DVD-RW discs recorded in VR mode and HDD that
have both
a
main and
switch among Main
Press AUDIO
audio channel
INSTANT SKIP
a
(L),
Bilingual audio channel, you
(R), or Main+sub (L+R).
repeatedly during playback to
(STEREO, LEFT or RIGHT).
Press INSTANT SKIP
can
Sub
hear
repeatedly during playback
a
different
to
skip
forward 15 seconds.
In HDD
skips
playback
forward
or
Timeshift mode, each press b / B
5 minutes.
or reverse
27
If
is
displayed
DVD
VCD
may be displayed first after
Video CD which contains a menu.
loading
a menu screen
The
menu screen
DVD
or
Marker Search
a
HDD
-RWVR
+R
DVD
To enter
Usetheb/B/v/Vbuttonstoselectthe
title/chapter you
start playback.
Press TITLE
or
view, then press ENTER
want to
MENU/LIST to return to the
You
to
menu
screen.
RAM
+RW
-R
VCD
Marker
a
playback
start
can
points.
-RW Video
DVD
To enter
desired
point
the TV
screen
from up to six memorized
at the
marker, press MARKER
a
the disc. The Marker icon appears
to enter up to six
on
on
briefly. Repeat
markers.
VCD
Use the number buttons to select the track you want
to view.
Press RETURN
Menu
for
to return to the
(O)
and the exact
setting
using the menu
operating procedures
You may also set PBC to
Setup
(see
menu
page
or
1.
During
disc
search
menu
menu screen.
may differ depending
disc. Follow the instructions on the each
screen.
To Recall
[OFF]
on
2.
the
3.
under
RAM
+RW
-R
appears
or
Press ENTER and
scene
-RWVideo
Marked Scene
press SEARCH. The marker
on the screen.
Useb/B/v/Vtoselectamarkedscenethat
marked
HDD
a
playback,
you want to recall
menu
24).
to another TITLE
Moving
Clear
clear.
playback
starts from the
Or, press CLEAR and the marked
scene.
is erased from the marker search
menu.
-RWVR
+R
DVD
DivX
When
disc has
a
another title
than
more
one
Press DISPLAY twice
select
a
to
use
Then, press the
numbered button
(0-9)
or
b / B to
title number.
Time Search
+RW
can move
then
during playback
v / V to select the title icon.
appropriate
title, you
follows:
as
-R
HDD
+R
-RWVR
DVD
-RWVideo
RAM
Camera
DivX
Angle
DVD
If the disc contains
To start
1.
playing
at any chosen time
the disc:
Press DISPLAY twice
search box shows
2.
on
during playback. The time
the elapsed playing time.
3.
Input
the
required
1.
hours, minutes, and
right.
a
different
camera
during playback.
Display appears on the
TV
screen.
Usev/VtoselecttheAngleiconintheOnDisplay.
Screen
3.
If you enter the wrong numbers, press b / B to
move the under bar (_) to the wrong number. Then
to
Press DISPLAY twice
The On-Screen
2.
start time in
seconds from left to
recorded at different
angles, you can change
angle during playback.
camera
Press v / V to select the time clock icon
and "0:00:00" appears.
scenes
Use b / B to select
a
desired
The number of the current
TV
angle.
angle appears
on
the
screen.
enter the correct numbers.
4.
Press ENTER to confirm.
selected time.
Playback
starts from the
Tip:
The ANGLE indicator will blink
scenes
recorded at different
angle switching
28
is
possible.
on
the TV
angles
screen
at
to indicate that
Last Condition
Memory
This recorder memorizes the
DVD
user
settings
for the last
disc that you have viewed. Settings remain in memory
even if you remove the disc from the recorder or
switch off the recorder. If you load a disc that had its
settings memorized, the latest stop position is
automatically
recalled.
Notes:
Settings are stored in memory for use any time.
This recorder does not memorize settings of a disc
if you switch off the recorder before
play it.
PIP
(Picture
-RW Video
in
+RW
Picture)
-R
commencing
HDD
+R
to
-RWVR
DVD
VCD
This function enables you to view the stored stations
in sub picture during playback.
Playbck
On and off
Press PIP to switch
button
Input
again
on
the sub
mode selection for sub
Press AV to select the
picture.
picture,
press this
to switch it off.
input
picture
mode for the sub
Each time this button is
mode for the sub
picture
is
pressed, each input
displayed as shown
below.
Tuner→AV1→AV2 →AV3OPT→AV3 →AV4
Program
selection for sub
picture
change the program when sub
picture's input is set to tuner. The selected program
number is displayed on the TV screen. You can
view the selected program by pressing STOP (x).
Use v / V to
Sub
picture position change
repeatedly until desired position is
achieved. The sub picture moves clockwise or
Press b / B
counterclockwise.
Zoom Sub
picture
repeatedly to enlarge the sub picture,
magnification level increases up to three steps.
Press ZOOM
the
29
Movie List
DivX Movie File
Playing
a
The recorder
can
play
Divx files. Before
files, read "DivX file requirement"
on
playing
right.
DivX
back the DivX
play
file(s)
a folder/file on the [Movie
List] menu then press ENTER.
[Movie List] menu options appear.
The menu options displayed differ depending on
the selected media.
in the
USB device.
options
Press v / V to select
1.
Note:
This recorder cannot
menu
2.
Pressv/V/b/Btoselectanoption,andpress
ENTER.
1.
Press HOME then select
2.
Select
a
[MOVIE] option.
media that contains DivX
press ENTER.
The [Movie List]
menu
on
appears
file(s)
[Play] Start playback the selected title.
[Open] Opens the folder and a list of files
then
the TV
folder appears.
[Delete] Deletes the
screen.
file(s)
or
folder(s)
in the
from the
media.
[Rename] Edits the file name. (page 35)
[Move] Moves the file(s) to another folder
media. (page 36)
[Copy] Copies the file(s) to another folder
media. (page 36)
DivX file
3.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
and
highlight
press ENTER.
4.
If you want to view a particular file, press v / V to
a file and press PLAY (N).
highlight
You
variable
can use
playback
functions. Refer to
Press STOP to stop the
menu
playback.
The
[Movie List]
appears.
Notice for
displaying
If the subtitle does not
H) pixel
Playable DivX subtitle: ".smi", ".srt",
(Micro DVD format only)",
".txt (Micro DVD format only)"
Playable Codec format: "DIV3", "MP43", "DIVX",
"XVID", "DX50"
Playable
Audio format: "AC3", "PCM", "MP2",
Sampling frequency:
48 kHz (MP3),
within 8
-
the DivX subtitle
display properly, please
follow
within 8
within 32
320kbps (MP3),
-
-
32
-
48kHz
(WMA)
192kbps (WMA)
CD-R Format: ISO 9660 and JOLIET.
DVD±R/RW Format: ISO 9660
(UDF Bridge format)
(total number
Maximum Files/Disc: Less than 1999
Press PAUSE/STEP when the subtitle appears.
of files and
Press and hold SUBTITLE about 3 seconds.
Notes
language
code will appear.
Press b / B to select another
the subtitle is
Press PLAY
x
".sub
1.
4.
(W
DivX file extensions: ".avi", ".divx"
2.
The
requirement
Available resolution size: 720x576
Bit rate:
the steps below.
3.
or
"MP3", "WMA"
pages 26-29.
5.
or
language
displayed properly.
(N)
to continue
playback.
folders)
DivX format
on
If the number of the
code until
screen
frame is
over
29.97
frames per second, this unit may not operate
normally.
If the video and audio structure of recorded file is
not
interleaved,
returns to the
menu screen.
If the file is recorded with GMC, the unit supports
only 1-point of the record level.
*
GMC?
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
MPEG4 standard. Some MPEG4 encoders, like
DivX or Xvid, have this option.
There
are
usually
30
different levels of GMC
called
1-point, 2-point,
or
encoding,
3-point GMC.
Playing
Audio CD
an
or
MP3/WMA
file
1.
The recorder
playing MP3/WMA files,
requirement" on right.
read "MP3/WMA audio
The HOME
2.
menu
Select
[MUSIC] option.
3.
Select
a
menu
The
menu
The
menu
on
or
options appear.
options displayed
Start
the TV
[Random]
audio
Playback
You
track then press PLAY
depending
on
stop random playback.
the folder and
a
list of files in the
file(s)
Edits the file
[Move]
Moves the
media.
(page 36)
from the media.
(page 35)
name.
file(s)
to another folder
or
[Copy] Copies the file(s)
media. (page 36)
to another folder
or
Adds the
track(s)
to
Program
Playbck
List.
starts.
can use
variable
playback
functions. Refer to
Random
1.
Press v / V to select
The
Tips:
2.
Press DISPLAY to view
ID3-Tag
the MP3 file. If
information is not
ID3-Tag
information for
number of MP3/WMA files in the folder
displayed.
Press DISPLAY
information
again
to
are
remove
the
move
to the upper
directory,
use
the v / V to
and press ENTER.
highlight
You also display HOME menu to select another
media by pressing HOME.
playback
options
a
file then press ENTER.
appear.
Press v / V to select
[Random] option
then press
ENTER.
automatically begins
and "RANDOM" appears
3.
To return to normal
option again
on
random
the
playback,
playback
menu screen.
select
[Random]
then press ENTER.
Tip:
screen.
If you want to
menu
The unit
present, [ID3-Tag: None] will appear. If you
select a folder, the number of subfolders and
To stop
or
Deletes the
[Program Add]
(page 32)
(N).
pages 26-29.
5.
differ
folder appears
[Rename]
a
the Audio CD
the selected title.
playback
Start
[Open] Opens
screen.
[Delete]
Use v/V to select
on
then press ENTER.
Pressv/V/b/Btoselectanoption,andpress
[Play]
media that contains MP3/WMA
title then press ENTER.
The [Music List] menu appears
4.
folder/file
a
ENTER.
appears.
2.
Music
options
menu
the selected media.
Press HOME.
1.
Press v / V to select
or
audio CDs and MP3/WMA files.
play
can
Before
file
Audio CD and Music
at any
time, press STOP.
By pressing
SKIP >
during
unit selects another track and
Random
playback,
resumes
Random
the
playback.
MP3/WMA audio file
requirement
File extensions
".mp3",
Tip:
You
on
can
create
new
the MUSIC-HDD
folder. Select
or
[New Album] option
MUSIC-USB
menu
ENTER. "NONAME##" folder is created.
then press
".wma".
Sampling frequency:
within 8 48 kHz (MP3),
-
within 32
-
48kHz
(WMA)
Bit rate:
within 8
-
320kbps (MP3),
32
-
192kbps (WMA)
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
ISO 9660
(UDF Bridge format)
Maximum Files/Disc:
Less than 1999
(total
number of files and
folders)
31
with Audio
Program Playback
CD and MP3/WMA file
1.
contain up to 99 Audio CD tracks
MP3/WMA files.
Use v / V to select
a
Audio CD
menu.
1.
You
can
or
Music
track/file
or
menu
by pressing
(or folder)
1.
on
Repeat step
(folders).
files/tracks
again.
2.
or
options
the left side of the
List
menu.
[Program Add] option
[Save]
If you select a folder for Programmed Playback, all
tracks/files in the folder are added to the Program List.
last is
a
Press PLAY
(N)
Playback stops
after
playing
the last
programmed
the
(HDD only)
Program
List
options appears
then press ENTER.
menu
[Delete] option
Track Order in the
Program
List
Select the track you wish to move on the Program
List. Use MARKER button to select multiple tracks.
2.
Press ENTER. The
3.
Select
4.
Use v / V to
options appears
then press ENTER.
the yellow bar to the desired
menu
[Move] option
move
location, then press ENTER.
To exit
Program Playback and resume normal
playback, select a track on the List and press
PLAY (N).
Save Your
you have
can access or remove
pressing
the
Program
List
screen
Program
List
This recorder memorizes the
Tip:
You
by
1.
Select
The
MENU/LIST.
2.
(HDD only)
user
program list that
programmed.
a
track
menu
on
the
options
Select
The
Program
List.
appear.
[Save] option then press ENTER.
Program List is saved in the HDD's
PROGRAM folder.
32
change
tracks.
Select
track in the program list.
8.
to
Tracks
Track from the
3.
1.
to start.
track(s)
Memorizes the program list.
Press ENTER. The
Changing
playing.
7.
Moves the
2.
Use v / V to select the track you want to start
6.
Program
Select the track you wish to erase from the
Program List. Use MARKER button to select
list.
Program
programmed track you selected
on
the
highlighted
program list.
from the
Repeat mode.
[TRACK] Repeats the current track.
[ALL] Repeats all tracks on the Program List.
[OFF] Cancels Repeat mode (no display).
multiple
The
track(s)
Press REPEAT to select the desired
1.
to the
stop random playback.
or
Repeat Programmed
Erasing
move
then press ENTER
program order.
1-3 to mark additional tracks.
Note:
Use B to
option
menu.
[Move]
then
Start
Deletes the
[Delete]
on
an
[Play] Playback begins in the order in which you
programmed the tracks from the selected track.
folder.
[Random]
appear
Repeat steps
Use v / V to select
to confirm your selection.
press ENTER.
5.
Program
(folders)
1 to mark additional file/track
Use v / V to select the
4.
the
on
Press ENTER.
The
3.
on
Press MARKER.
marked file/track
2.
track/file
the
A check mark appears on the file/track or
folder. Press MARKER again to cancel the
2.
a
CLEAR button. To
cancel the selections, press CLEAR
Selecting multiple
Press v / V to select
256
select all MP3/WMA files and folders
the Music
options
menu
List then press ENTER.
The menu options appear.
Program Playback enables you to make custom
playlists of Audio CD or MP3/WMA tracks. Programs
can
List
Program
Viewing
a
The recorder
can
JPEG
Photo List
JPEG File
play
recordings,
JPEG files. Before
read "Photo file
playing
requirement" on
1.
menu
Press HOME.
The HOME
a
file
the
[Photo List]
differ
depending
on
then press ENTER.
The
menu
The
menu
options appear.
options displayed
on
the selected media.
menu
appears.
2.
Select
[PHOTO] option.
3.
Select
a
You
can
select all files and folders
media that contains JPEG file then press
Selecting multiple
[Photo List]
menu
the
on
menu
by
CLEAR button. To cancel the selections,
press CLEAR again.
pressing
ENTER.
The
options
Press v / V to select
1.
right.
menu
appears
on
the TV
files
(folders)
Press MARKER.
1.
screen.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or
2.
folder.
Repeat step
1 to mark additional file
Use v / V to select
2.
an
option
(folders).
then press ENTER
to confirm your selection.
[Open] Opens
the folder and
a
Playbck
list of files in the
folder appears
4.
Useb/B/v/Vtoselectafile,thenpress
[Full Screen]
ENTER.
screen.
The
menu
options
appear
on
the left side of the
[Delete]
menu.
If you want to
move to the upper directory, use the
and press ENTER.
highlight
You can also display HOME menu to select another
media by pressing HOME.
Use v / V to select
[Full Screen]
then press
ENTER.
The selected
image
displayed
in full
screen.
Depending upon the size and number of JPEG
files, it could take a long time for the recorder to
name.
full
menu.
(page 35)
[Move] Moves the file(s) to another
(album) or media. (page 36)
[Copy] Copies the file(s)
media. (page 36)
folder
to another folder
or
Tip:
You
is
Slide Show
Edits the file
[Rename]
v / V to
as
Deletes the selected file from the media.
[Slide Show] Displays
Tips:
5.
Shows the selected file
can
Select
create
new
folder in the HDD
or
USB device.
then press ENTER.
"NONAME##" folder is created.
[New Album] option
read the files.
Photo file
requirement
File extensions
".jpg"
Photo size:
Less than 4MB recommended
CD-R Format:
ISO 9660 and JOLIET.
DVD±R/RW Format:
Press ENTER to appear or disappear this
the full screen.
menu
during viewing
ISO 9660
(UDF Bridge format)
Maximum Files/Disc:
Less than 1999
6.
To stop viewing at any time, press STOP.
The [Photo List] menu appears.
Notes
on
(total
number of files and
Progressive
and lossless
files
supported.
are
folders)
JPEG file
not
compression
JPEG
image
33
To listen to music while slide show
Skip Images
While
once
press SKIP (.or >)
to advance to the next file or return to the
viewing
a
picture,
simultaneously
You
previous
file.
Rotate
Images
can
display photo
files while
MP3/WMA music files recorded
Use v / V while
clockwise
or
1. Select
viewing
a
picture
to
flip
the
(Refer
picture
counterclockwise.
[Slide Show] option on the [Photo List] menu
"[Photo List] menu options" on page 33).
to
The Slide Show
3.
[Slide Show] option
to "Photo List
(Refer
menu
to
HDD.
2. Press ENTER.
View Slide Shows
1. Select
listening
on
menu
[Simultaneous
Slide Show
the
[Photo List] menu
options" on page 33).
on
Select
appears.
Music
play] option
on
the
menu
2. Press ENTER.
The Slide Show
menu
appears.
4.
Press ENTER.
Simultaneous Music
5.
3.Useb/B/v/Vtosettheoptions.
[Object] option:
[Selected] Views
slide show
only
Select
Use the MARKER button to select
[All]
multiple
files.
menu
appears.
multiple files.
[Select All] option to select all tracks
press ENTER.
Select [Deselect
selected files.
play
Press MARKER to select
All] option
then
to deselect all
selected tracks then press ENTER.
Select [Cancel] option to exit this menu then
Views slide show all files.
press ENTER.
[Speed] option:
Sets the Slide Show
speed
to
[Slow], [Normal],
or
6.
[Fast].
Use b / B / v / V to
highlight [Start] option
then
press ENTER.
4. Select the
[Start] option
then press ENTER to start
the Slide Show.
5. Press STOP to
the
[Photo List]
stop the Slide Show and
returns to
menu.
To Pause the Slide Show
1. Press PAUSE/STEP
(X)
to pause slide show.
2. When you want to continue slide
PLAY
show, press
(N).
7.
Press STOP to stop the Slide Show and return to
the
34
[Photo List]
menu.
Editing
MP3/WMA, JPEG,
a
DivX
file
Naming
You
a
file
can name
on
device
These
independently.
characters long.
1.
Select
Note:
2.
Press ENTER.
descriptions are MP3 file's operation for
example, other kind's files are operated same way.
The MP3/WMA, and DivX files on the disc or HDD
cannot be copied or moved to USB device.
The
3.
file(s)/folder(s)
from the HDD
file you wish to
menu
options
can
the HDD
on
or
USB
be up to 32
rename on
appear
[Edit] option then
options appears.
USB device
or
on
the
the
menu.
menu.
press ENTER.
USB device
or
You
can erase
folder(s)
1.
a
Names
Select
Edit
Erasing
a
the HDD
MP3/WMA files
on
Select
You
a
can
MP3/WMA, JPEG
the HDD
or
or
DivX
file(s)/
USB device.
file you wish to erase on the menu.
select all files and folders on the menu
by
CLEAR button. To cancel the selections,
press CLEAR again.
pressing
Selecting multiple
1.
files
4.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
or
2.
2.
Select
[Rename] option then
Keyboard menu appears.
To enter characters,
see
press ENTER.
page 48.
folder.
Repeat step
1 to mark additional file
(folders).
Press ENTER.
The
3.
Playbck
(folders)
Press MARKER.
menu
Select
options
appear
[Delete] option
file(s) is
The selected
on
the
menu.
then press ENTER.
deleted.
35
Copying
a
to another media
file(s)
Moving
or
folder
You
You
can
copy
a
to another media
file(s)/folder(s)
Select
You
pressing
by
1.
Follow steps 1-3
2.
Press ENTER.
CLEAR button. To cancel the selections,
press CLEAR
again.
The
3.
Selecting multiple
file(s)/folder(s) to another media or
moving, the file(s)/folder(s) are deleted
from the current location.
file you wish to copy on the menu.
select all files and folders on the menu
a
can
file(s)
can move a
folder. After
or
folder.
1.
a
files
options
Select
Move
(folders)
as
appear
shown left.
on
[Move] option
menu
the left side of the
menu.
then press ENTER.
will appear.
Press MARKER.
1.
A check mark appears on the file or folder.
Press MARKER again to cancel the marked file
folder.
or
2.
Repeat step
1 to mark additional file
(folders).
Press ENTER.
2.
The
menu
3.
Select
4.
Select
Edit
options
appear
[Edit] option then
options appears.
Copy
[Copy] option
menu
on
the
menu.
press ENTER.
4.
then press ENTER.
You
1.
appears.
The
2.
select
can
a
album
(folder)
to
move.
After
selecting a media then press
album (folder) list appears.
Select
a
ENTER.
folder.
Also, you
can
create
[New Album] option
new
on
album
the Move
(folder).
menu
Select
then
press ENTER.
"NONAME##" folder is created.
5.
You
5.
1.
The
2.
select
can
a
album
(folder)
to copy.
After
selecting a media then press
album (folder) list appears.
Select
a
ENTER.
folder.
Also, you
can
create
[New Album] option
new
on
album
the
Copy
(folder).
menu
Select
then
press ENTER.
"NONAME##" folder is created.
Select
6.
[Copy] option
copying.
then press ENTER to
begin
Note:
If
a
folder's
available.
36
depth
is
more
than 5 level, the copy is not
Select
[Move] option
moving.
then press ENTER to
begin
Notes:
Recording
About DVD
The maximum number of titles that
on
Using
recording
can
be recorded
the HDD is 255.
the HDD allows you to record
12 hours
a
maximum of
continuously.
Notes:
This recorder cannot make
recordings
on
CD-R
or
Notes for
recording
CD-RW discs.
The
Our company takes no responsibility for recording
failure due to power outages, defective discs, or
damage to the Recorder.
the recorder
Fingerprints and small scratches on a disc can
playback and/or recording performance.
Disc
and
care
of your discs.
types and recording formats, modes,
settings
This recorder
discs:
can play six different kinds of DVD
pre-recorded DVD-Video discs, DVD-RW,
DVD-R, DVD-RAM, DVD+RW and DVD+R discs.
The disc format for DVD-R, DVD+R, DVD+RW discs
is always "Video format"---the same as pre-recorded
DVD-Video discs. This
means
that
once
finalized, you
play a DVD-R, DVD+R, or DVD+RW in a regular
DVD player. The DVD-RAM disc format is Video
Recording (VR) format.
By default, the DVD-RW disc format is Video format,
though you can change this to Video Recording (VR)
format, if required. (Reinitializing the disc will erase
the contents of the disc.)
The recording mode is closely related to the disc
format. If the disc format is Video Recording format,
then the recording mode is VR mode; if the disc
format is Video mode, then the recording mode is
Video mode (except for DVD-Video, which is not
recordable, and so does not have a recording mode).
Within the recording modes (which are fixed for them
whole disc) are the record settings. These can be
changed as required for each recording and
determine the picture quality and how much space the
recording will take up on the disc.
can
erase
recording
can
record,
erase
and re-record
many times
of the hard disk drive means
as
as
the contents, the HDD is divided into ten
genre. You can name and use these genres as you
like---for example, you might have a genre for movies,
another for TV shows, and
recordings.
one
not exact because
option
on
the disc.
in the Title List
(Original)
hides the title, it does not actually erase
the title from the disc and increase the recording
menu
only
time available
(except
for the last recorded title
DVD-RW disc in Video
on a
mode).
Overwrite
recording is available using DVD+RW discs.
using a DVD+R/RW, the recorder will execute
the Menu-making operation to update the new title
and editing when removing the disc from the recorder
When
turn off the recorder. So you must
selecting
the recorder's
remove
operation
the disc
mode to DVD
mode.
you like. The capacity
that you can store many hours of video on it, even in
the higher quality recording modes. To help you
organize
the last title recorded
The Delete Title
after
Recording to the internal hard disk drive (HDD) is
basically similar to recording to a VR mode DVD-RW
disc. You have the full choice of recording quality
options, including the manual mode, and of course
you
are
variable bit-rate video
compression. This means that the exact recording
depend on the material being recorded.
When recording a TV broadcast, if the reception is
poor or the picture contains interference, the
recording times may be shorter.
If you record still pictures or audio only, the
recording time may be longer.
The displayed times for recording and time
remaining may not always add up to exactly the
length of the disc.
The recording time available may decrease if you
heavily edit a disc.
If using a DVD-RW disc, make sure you change the
recording format (Video mode or VR mode) before
you record anything on the disc. See page 23 (Disc
Format) for how to do this.
When using a DVD-R or DVD+R disc, you can keep
recording until the disc is full, or until you finalize the
disc. Before you start a recording session, check
the amount of recording time left on the disc.
When using a DVD-RW disc in Video mode,
recording time available will only increase if you
or
About HDD
times shown
uses
time will
affect
Please take proper
recording
for camcorder
Recording
There
time and
picture quality
recording quality modes:
XP
Highest quality setting, gives about 1 hour of
recording time on a DVD (4.7GB).
SP
Default quality, sufficient for most applications,
gives about 2 hours of recording time on a DVD
(4.7GB).
LP
Slightly lower video quality, gives about 4 hour
of recording time on a DVD disc (4.7GB).
EP
Lowest video quality, gives about 6 hour of
recording time on a DVD (4.7GB).
You may see a fragmented picture during playing
are
four preset
--
--
--
--
back the contents recorded in EP mode.
37
Timeshift
Do not miss
Clip
HDD
a scene
from
live broadcast. If the
a
You
telephone rings while you are watching your favorite
live broadcast, just press "TIMESHIFT" and "PAUSE"
before answering the phone. The timeshift function will
1.
later
viewing.
phone
2.
call or viewing interruption, press
"SCAN" to watch the program.
Press "STOP" to return to the live broadcast.
"PLAY"
(Pause,
Operation
You
can
Live
to store the program
on
During Timeshift, use pause step, search and
slow-motion to find the starting point.
Press REC at the
Progress
Progress
starting point
of the section you
of the edit is indicated in red
on
the
Bar.
TV/Playback)
HDD
3.
store
a
program in the HDD storage cache
temporarily.
Progress
Bar
shown below. The
watching
a
to timeshift
ending point.
Press REC at the
ending point
of the section you
want to record.
TV program.
the screen as
display appears on
Progress Bar changes
Use pause step, search and slow-motion to find
the
4.
Press TIMESHIFT while
The
during Timeshift
(Hard Disk Drive).
want to record.
or
Timeshift
HDD
edit
can
the HDD
be activated and the broadcast is then recorded for
After the
Record
Normal
5.
playback
Records of
icon after 5 seconds.
a
continues.
1 and 4 to make several
Repeat steps
Clip
program.
12
6.
Press STOP to stop Timeshift.
Confirm message will appear.
34
5
Indicates
2.
Indicates current Timeshift
3.
Indicates Timeshift start time.
4.
Indicates Timeshift
playback
mode.
elapsed
Indicates the time that is
5.
7.
position.
one
Selected sections
can use
hour from Timeshift
trick
play
the
screen.
are
recorded
on
the HDD.
less than 5 seconds.
functions
timeshift. Refer to
(Slow, Scan, etc.)
Playback Operation on
clip during
MPEG4
recording is not available with Clip
Recording and Timeshift Operation. (available only
in MPEG2 recording format)
Timeshift to
retain the program on the HDD. Refer to
Record on the right.
Clip
Jump
1.
Notes:
There is not free space on the HDD, the oldest
timeshift section of the cache will be incrementally
button is
pressed
to Start
Press ENTER
or
End
during
during
Timeshift
timeshift. The
menu
will
appear.
2.
Press b and
beginning
deleted.
no
on
the program may not be recorded on the HDD.
Clip records cannot be made for sections lasting
pages 26-29.
You can edit the cached
If
displayed
If you want to stop Clip recording, press the STOP
button. If you press POWER to stop Clip recording,
Tips:
during
then press ENTER. Or,
[Yes]
Notes:
time.
start time.
You
Use b / B to select
press STOP again.
The current broadcast is
1.
Press B and
for 6 hours, the Timeshift will
playback
starts from the very
of the timeshift.
jumps
to the very end of the timeshift
then goes to pause mode.
stop automatically.
To Exit the Timeshift
Marker Search in Timeshift mode
You
can
mark
at the desired
one
in Timeshift mode. Press MARKER
point during
Timeshift.
Press SEARCH to recall the marked
38
scene.
1.
Press STOP to exit Timeshift function.
2.
Confirm message will appear.
Use b / B to select [Yes] then press ENTER.
The current broadcast is displayed on the screen.
Basic
Recording
from
Follow the instructions below to record
Recording
TV program.
and continues until the
a
Press PAUSE/STEP
2.
When you want to continue
PAUSE/STEP (X).
you stop the
or
To record
Note:
You must load
recordable disc for DVD
a
recording.
watching
1.
Press HOME.
1.
The HOME
menu
2.
appears.
2.
Select
[TV] option.
3.
Select
[TV HDD]
or
[TV DVD] option
then press
Recording
1.
immediately
recording.
starts
disc is full
To Pause the
TV
a
(X)
recording.
recording, press
to pause
TV program while
one
another
Press TV/DVD to select the TV mode
during
recording. The TV indicator appears.
Using the TV, select the channel to be viewed.
Instant Timer
Recording
ENTER.
Also make
sure
that the TV
input
Instant Timer
Recording allows you to make a
recording easily of a preset length without using
is set to this
recorder.
If you load a completely blank disc, the recorder
takes a short while to initialize the disc.
4.
Set
recording mode as necessary by pressing
repeatedly. (XP, SP, LP, EP)
a
1.
Use v / V buttons to select the TV channel to
Follow steps 1-5
from
REC MODE
5.
2.
a
as
shown left
(Basic Recording
TV).
Press REC
time
record.
the
program timer.
(z) repeatedly
to select the
recording
length.
Changing TV Audio Channel
You
can
select the audio channel
by pressing
(language) to
during viewing TV program.
channel is displayed on-screen.
AUDIO
current audio
Stereo
or mono
Stereo
→
→
Recording starts after the first press. Each
subsequent press increases the recording time
within free space (maximum 240 minutes).
The recording time is displayed on the TV screen.
At the end of the recording, the recorder will stop
recording and shut off.
broadcast:
→
Right
Sub
→
Mono
Main+Sub
→
For TV
with
recording
bilingual,
[TV Rec Audio] in sub-menu
(see page 23).
of the
Setup
If the sound is of poor quality when set to Stereo,
you can often improve it by changing to Mono (Left
or
Recording
set audio channel
from the
menu
The
broadcast:
Bilingual
Main
Left
listen
Right).
Checking
the
Recording
Press REC
once
recalled
will
screen
(z)
setting
for
a
Time
to check the
automatically
recording
time. The
return to the TV
moment.
Also, remaining time of recording is shown in the
This recorder
record either NICAM
can
audio. If the NICAM
or
regular
is set to Auto,
then if the broadcast is NICAM, the audio
automatically changes to NICAM and you can
setting (page 19)
record the NICAM audio. If the broadcast is
non-
NICAM, the regular audio is always recorded.
If NICAM sound distortion occurs, due to poor
you can switch off NICAM setting of the
display
window.
To Extend the
Recording
Time
The
recording time can be extended anytime by
pressing REC (z).
Each subsequent press increases the recording time
within free space (maximum 240 minutes).
reception,
program.
6.
Caution
Press REC
(z)
If the recorder is
once.
Recording will start. (The
the display window.)
REC indicator
lights
or
Timer
7.
a
fixed
Recording
Press STOP
(x)
to
on
length
right.
failure)
unplugged (or there is a power
recording, the recording
while the recorder is
will be lost.
continues until you press STOP
the disc or HDD is full.
Recording
To record for
in
of time,
see
(x)
Instant
stop recording.
39
Timer
2.
Recording
This recorder
can
be
programmed
Enter the necessary information for your timer
recording(s).
to record up to 16
b / B
(left/right) move the cursor left/right
(up/down) change the setting at the
current cursor position
Press RETURN (O) to exit the Timer Record
programs within a period of 1 month. For unattended
recording, the timer needs to know the channels to be
recorded, the starting and ending time.
Note:
If you
--
menu.
use a
blank disc for timer
completely
recording,
Press ENTER after
you must format the disc before starting timer
recording. (Refer to "Disc Format" on page 23.)
1.
--
v / V
Press TIMER REC to
3.
Press TIMER REC.
The Timer Record
menu
filling
in all the program
information.
Set
a
REC
will appear.
4.
display
Timer Record List.
recording mode as necessary by pressing
MODE repeatedly. (XP, SP, LP, EP)
Press ENTER, the program will be memorized
by
the recorder.
To check the
programming,
will appear.
Check field's "Rec. OK"
indicates that the timer
[Media]
DVD).
[PR]
one
(You
Choose
Choose
a
a
media to record
[Date]
Choose
(HDD
or
memorized program number, or
inputs from which to record.
[Start Time]
[End Time]
a
input.)
date up to 1 month in advance.
Set the start time.
Set the end time.
[Repeat] Choose a desired repeat (Once,
Daily (Monday Friday), or Weekly).
-
the Timer Record List
recording
is
programmed
correctly.
of the external
cannot select DV
on
the Timer Record List
5.
Press RETURN
6.
Make
(O)
to exit the Timer Record List.
that you load a recordable disc for DVD
and press POWER to switch your unit to
sure
recording
Standby.
Notes:
The timer indicator
lights in the display window
standby with the timer
displayed while the [Power Save
when the recorder is in
active.
(Nothing is
ON.)
For TV recording with bilingual, set audio channel
from the [TV Rec Audio] in sub-menu of the Setup
menu (see page 23).
You must press STOP to stop the timer recording.
If you set a timer recording to record to DVD but
Mode]
is
there isn't
a
recordable DVD loaded at the time of
the
recording, the Recovery Recording feature will
automatically record the program to the HDD for
you.
MPEG4
recording is not available with Timer
recording. (available only in MPEG2 recording
format)
40
Checking
Timer
If two
or more timer programs overlap:
The earlier program takes priority.
When the earlier program finishes, the later
Recording
Details
Programming
is turned
can
program starts.
If two programs
be checked whenever the recorder
Press TIMER REC twice.
on.
Use v / V to select
timer
a
are
exactly
set to start at
the
same
time, the program entered first takes priority.
recording.
If the disc is damaged,
complete successfully.
Press ENTER to edit the selected program.
Timer Record menu appears.
the
recording
In this
may not
case even
though
the
Check field shows "Rec. OK", it may not be.
Press CLEAR to delete the selected program
from the Timer Record List.
Recording
Input
an
from External
Recording
You
from
Components
external component, such
a camcorder or VCR, connected to any of the
recorder's external inputs.
1.
can
record from
External
Make
an
as
that the component you want to record
properly to the recorder. See
sure
from is connected
page 12-13.
Canceling
Timer
a
2.
Recording
using
You
can clear a timer setting anytime before the
recording actually starts.
Usev/Vtoselectaprogramyouwanttoeraseon
the Timer Recorder List. If you want to
program, press CLEAR.
Stopping
After
a
Timer
a
timer
Recording
recording
Choose
in
erase
3.
a
media
HOME
Press AV
(TV HDD or TV DVD)
(see page 18).
repeatedly
to select the external
AV1: EURO AV1 AUDIO/VIDEO mounted
back
Progress
can
AV4: AV IN 4
front
Note
on
disc loaded and there is not free space
no
(VIDEO,
on
menu
5.
the HDD.
is set to
[ON]
and there is not free space
page 24).
Power is turned
in the
on
Setup
the HDD.
(see
recorded
on
A
a
timer program when:
recording is already underway.
you're trying to set has already passed.
There are already 16 timer programs set.
The time
on
front
panel
or
as necessary by
repeatedly. (XP, SP, LP,
or
REC indicator
lights
continues until you press STOP
in
(x)
the disc is full.
To record for
Timer
6.
mode
recording
REC MODE
Recording
the HDD.
on
(z) once.
Recording will start. (The
the display window.)
There
You cannot enter
panel
(L/R)) mounted
Press REC
on.
are already 99 titles (DVD-RW, DVD-R,
DVD-RAM), 49 titles (DVD+R, DVD+RW) recorded
on the disc and there are already 255 titles
back
:
pressing
EP)
A non-recordable disc is loaded and there is not
[Disc Protect] option
on
AUDIO
panel
4. Select the
the HDD.
free space
back
OPT will not be recorded.
the timer is set, the recorder will not
record when:
There is
on
panel
AV3: AV IN 3 mounted
still
Recording Troubleshooting
though
Recording
on
panel
DV: DV IN mounted
Even
to
Tuner: Built-in tuner
the
AV2: EURO A/V2 DECODER mounted
has started, you
input
record from.
cancel the program.
Press STOP.
Timer
to record
menu.
a
fixed
Recording"
Press STOP
(x)
to
on
length
of time,
see
"Instant
page 39.
stop recording.
Note:
If your source is copy-protected using CopyGuard,
you will not be able to record it using this recorder.
See Copyright on page 52 for more details.
41
from DV
Recording
Before DV
1.
Input
Make
dubbing
2.
Select
menu
You
can
recorder
connect
using
a
DV-equipped
single DV cable
a
camcorder to this
for
input
and output
3.
at
a
more
than
one
input
is
choose between Audio 1
Input
you require.
(original audio)
as
(overdubbed audio).
is set from the
Setup
Audio"
Recording
equipment connected via the DV IN jack (including
recorders).
It may not always be possible to control the
connected camcorder via the DV IN jack.
Digital camcorders can usually record audio as
4.
on
[DV
Rec
menu.
Audio]
in
See "DV
page 23 for
more
only record one stereo
audio track. Set [DV Rec Audio] option to [Audio 1]
or [Audio 2] as required (see page 23).
Audio input to the DV IN jack should be 32 or
48kHz (not 44.1kHz).
Picture disturbance on the recording may occur if
the source component pauses playback or plays an
unrecorded section of tape, or if the power fails in
source component, or the DV cable becomes
disconnected.
repeatedly to select the DV input.
display window and on the
TV
screen.
5.
Find the
place on the
recording
camcorder tape that you
want to the
to start from.
For best results, pause playback at the
which you want to record.
can
the
Press AV
DV appears in the
twin stereo tracks of 12-
or
HOME
information.
two
16-bit/48kHz,
[TV DVD] option on the
(see page 18).
or
sub-menu of the
DV camcorder
You cannot control this recorder from external
bit/32kHz. This recorder
can
DV
time to this recorder.
stereo
[TV HDD]
then press ENTER.
and Audio 2
(DVC-SD, DV25) camcorders. Digital satellite tuners
and Digital VHS video recorders are not compatible.
You cannot connect
panel
Check that the DV audio
You
of audio, video, data and control signals.
This recorder is only compatible with DV-format
your digital camcorder is connected to
DV IN jack. See page 13.
sure
the front
point
from
on your camcorder, you can use this
recorder 's remote to control the camcorder
Depending
using
6.
the STOP, PLAY and PAUSE functions.
Press REC
(z)
once
to start
recording.
is
automatically stopped if the
recorder detects no signal.
You can pause or stop the recording by
pressing PAUSE/STEP (X) or STOP (x).
Recording
You cannot control the camcorder from this
Recording
You
can
from
record from
the DV IN
jack
on
a
a
Digital
camcorder connected to
digital
panel
the front
the recorder's remote, you
camcorder and this recorder.
Using
Before
remote control
Camcorder
of this recorder.
can
after
recording, make sure that the audio input
jack is set up (see page 23).
Troubleshooting
for
If you cannot get a picture and/or audio
DV IN jack, check the bullet points:
Tips:
Make
source
signal
must be DVC-SD format.
Some camcorders cannot be controlled
using
this
You cannot control this unit
switch back
remotely from
jack.
through
properly connected.
equipment then
off the connected
on.
the audio
input.
on
the connected camcorder, you may
using the remote control
not be able to control it
a
the
Notes:
Depending
a
to the DV IN
You cannot record date and time information from
42
the DV cable is
Try switching
If you connect a second recorder using a DV cable,
you cannot control the second DVD from this one.
DV cassette.
sure
Try switching
recorder's remote.
component connected
recording stops.
control both the
the DV IN
The
during recording.
In Video mode, the final frame of the recording
may remain displayed on screen for a while
supplied
MPEG4
with this recorder.
recording is not available with the DV
dubbing. (available only in MPEG2 recording
format)
Simultaneous
recording
MPEG4
and
playback
You
another title
Playback
during recording
and
recording for both DVD and built in hard
(HDD) are completely independent. For
Playback
disk drive
you can record to either the DVD or HDD
and play back video from the other source at the
example,
source
same
1.
1.
3.
Press HOME to
3.
Usethev/V/b/BandENTERbuttonsto
a
display
the Home Menu
screen.
different media type that you want to
continue while
You can't
use
recording
while
Start
Recording.
the HDD.
menu.
To
listed
are
back
play
an
on
MPEG4
the
[Movie
recordings,
playing
back the
You cannot edit the video content with MPEG4. If
you want to edit functions, set the [MPEG4]
to [OFF] on the setup menu (See page 23).
simultaneous
playback
during
set to
appear.
A button is not activated
simultaneous
during MPEG4 recording.
(PLAY, TIMESHIFT, MENU/LIST, HOME, etc.)
This function is not available in MPEG4
recording
The loss of video may occur while MPEG4
recording because of characteristics of MPEG4
mode.
video
HDD
play back
simultaneously.
can
1.
Start HDD
2.
Press PLAY
You
the current title in
(N).
playback starts and the recording will continue
while playing back.
YoucanusePAUSE(X)andSCAN(m/M)
buttons for pause, scan, slow-motion during
playback.
The
Press STOP
This is not
encoding.
can
Specifications
Video
Notes:
Recording
malfunction.
of MPEG4
Recording
Encoding
Encodeing: XVID
Format
format
Resolution: 640
x
480
480
x
352
352
x
256
Audio
then returns to the current
a
select the audio channel to record
by
pressing AUDIO. The [TV Rec Audio] option on the
Setup menu does not affect to the MPEG4 recording.
recording
recording.
(x).
The playback will stop
recording position.
option
If you press MENU/LIST when [MPEG4] option is
[ON] in HDD mode, the [Movie List] menu will
and
copying.
You cannot edit programs
recording and playback.
3.
recording mode as necessary by pressing
repeatedly. (XP, SP, LP, EP)
Notes:
Notes:
You
(TV
refer to pages 30.
Playback.
recording will
Slip
a
List]
media from the other mode.
Time
Set
on
play
Start
The
the setup
on
you want to record
The recorded contents
back.
4.
source
[ON]
This unit will record the video with MPEG4 format
2.
select
input
to
REC MODE
4.
recording.
video with MPEG4 video format.
a
[MPEG4] option
(See page 23).
Select
HDD
channel, AV input, etc).
time.
Start
record
can
Set the
menu
2.
Recording
(XP, SP mode),
(LP mode),
(EP mode)
Format
Encoding
Encodeing: AC3
Quality: 128 kbit/sec,
48 kHz
(Sampling rate),
Stereo
Maximum Titles
Playback cannot be started
recording starts.
until 15 seconds
Less than 1999 titles
after
This function does not work in DVD
recording
mode.
This function is not available in MPEG4
recording
mode.
Maximum Title Size
2
GBytes
If the size of title recorded
2GBytes,
the
recording
presently
title. The unit cannot record
when
creating
the
new
is
more
will be continued in
during
a
than
a new
few seconds
title.
Recordable Time
Approx.
(80GB)
(XP mode),
(SP mode),
(LP mode),
(EP mode)
83 hours
108 hours
138 hours
201 hours
43
123
Editing
Title List and
Chapter
45
67
List Menu
Overview
Using the Title List menu you can edit video content.
editing features available in the Title List menu
depend on whether you are editing video on DVD, or
the HDD, and whether you're editing Original content,
or a Playlist.
The
There
You
are
can
two ways to edit VR mode DVD-RW discs.
directly
edit the
content of the
Original
disc,
you can create and edit a Playlist. The Playlist
doesn't actually change any of the content on the
disc, but just controls how the content is played back.
or
Editing material recorded on the HDD is similar to
editing the Original content of a VR mode DVD-RW,
with similar commands for erasing and naming titles,
as well as fine control over the content of chapters
1.
within titles for DVD disc.
During recording, if you display the Title List menu for
the HDD, some of the titles may appear with a mark.
These titles were recorded with a Line Input setting
During recording,
1.
setting
of the recorder.
these titles cannot be
Press MENU/LIST to
Playback
should be
played.
the Title List
display
stopped when
menu.
you do this.
If you press MENU/LIST when [MPEG4] option
is set to [ON] in HDD mode, the [Movie List]
menu
You
will appear.
also access it
using HOME menu,
[MOVIE] option then select [HDD] or
[DISC] option and press ENTER.
can
select
When
selecting titles, use the v / V buttons to
display the previous/next page if there are more
than six titles.
If you are editing a VR mode disc, press
MENU/LIST to switch between Original and
Playlist
-
-
menu.
On the left side of the
screen are
the
menu
options.
The main part of the screen shows thumbnails of the
titles (or chapter) on the DVD or HDD. You can
change
these thumbnails
button---see
Changing
Press DISPLAY to
title
on
using
display
the Title List
on
page 45.
your selection.
To exit the Title List menu, press RETURN
44
Indicates the record mode, free space, and
time progress bar.
Current media
selected title.
4.
Currently
5.
Thumbnail
6.
Shows the selected title number and total number
of titles.
7.
(O)
Un-do/Re-do the last deletion/ action.
elapsed
3.
menu.
selecting a title or chapter on the Title List or
Chapter List menu, then press ENTER. The menu
options appears on the left side of the menu. Use
v / V to select a option then press ENTER to confirm
repeatedly.
2.
the information of selected
After
2.
[Undo]/[Redo]
(page 49)
the THUMBNAIL
Title Thumbnails
options: To display menu option, select a
chapter then press ENTER. The options
displayed differ depending on the disc type.
or
[Combine] Combines two titles or chapters into one
(page 49, 50).
[Delete] Deletes the title or chapter. (page 47)
[Delete Part] Deletes a part of the Title (page 47).
[Divide] Divides a title into two (page 50).
[Dubbing] Copies the title to another media. (page 52)
[Full Play] Starts playback of the selected title
including the hidden chapters.
[Hide (Show)] Hides (or Shows) the selected title or
chapter. (page 51)
[Move] Moves a chapter on the Chapter List-Playlist
menu to a position on the menu. (page 51)
[Play] Start playback of the selected title or chapter.
The hidden titles and chapters on the DVD+R/RW
cannot be play back.
[Playlist Add] Adds the title or chapter to the Playlist.
(page 46)
[Protect] Protects accidental recording, editing or
deleting of the title. (page 51)
[Rename (Title Name)] Edits the title name. (page 48)
[Search]
[Chapter]; Displays Chapter List of the Title.
[Time]; Search time for you want start point
of the title. (page 48)
[Sort] Lists the programs on the Title List menu by
Date, Title, or Category. (page 49)
[Title] Displays Title List of the chapter.
Note:
different to the current
Menu
title
Shows the title name, recorded date, and
recording length.
HDD, VR Mode: Original and
Playlist Editing
Adding Chapter
HDD
Titles, Chapters and Parts
Titles in the disc's
You
content contain
original
one or
chapters. When you insert a disc's title into the
Playlist, all the chapters within that title also appear. In
other words, chapters in the Playlist behave exactly as
chapters on a DVD-Video disc do. Parts are sections
of Original or Playlist titles. From the Original and
Playlist menu you can add or delete parts. Adding a
chapter or title to the Playlist creates a new title made
up of a section (ie., chapter) of an Original title.
Deleting a part removes part of a title from the
Original or Playlist menu.
-RW VR
can
chapter
create
RAM
chapters
Markers
+RW
within
marks at the desired
+R
a
title
by inserting
points.
more
Caution
When
the Delete, Add and Move
functions, the start and end frames may not be
exactly as set in the start and end point display.
editing using
you may notice a
momentary pause between edits. This is not
malfunction.
During Playlist playback,
Is editing
tape?
DVD like
a
editing
a
a
video
Note:
Chapter markers are inserted at regular intervals
automatically. You can change this interval from the
Initial Setup menu (see "Auto Chapter" on page 23).
During recording
want to start
A
chapter
playing back, at the point
chapter, press CHP ADD.
marker icon appears
Changing
HDD
or
a new
on
the TV
you
screen.
Title Thumbnails
-RW VR
RAM
+RW
+R
Each title displayed in the Title List menu is
represented by a thumbnail picture taken from the
start of that title or chapter.
If you prefer, select a different still picture from within
a
title.
Press THUMBNAIL to make the
currently displayed
No. When you edit a video tape you need one video
deck to play the original tape and another to record
that appears in the Title List menu.
The still picture that you choose appears in both the
the edits. With DVD, you edit by making a 'Playlist' of
what to play and when to play it. On playback, the
Original
Recorder
plays
About word
-RW VR
the disc
according
'Original'
and
to the
Playlist.
picture
Throughout this manual, you will often see the words
Original and Playlist to refer to the actual content and
Playlist
menu.
also change the thumbnail picture of the title
Chapter List menu. Select a chapter on the
Chapter List menu then press THUMBNAIL. The
thumbnail picture of the title that includes the chapter
is changed.
on
RAM
or
one
Tip:
You
'Playlist'
the
can
the
Edit ng
the edited version.
Original:
on
content refers to what's
actually
recorded
the disc.
Playlist:
disc
---
content refers to the edited version of the
how the
Original
content is to be
played.
45
Making
-RWVR
a
New
Adding Additional Title/Chapters
RAM
Playlist -RW
Playlist
to the
RAM
Use this function to add
an
Original
title
or
chapter
to
the
Playlist. When you do this, the whole title is put
into the Playlist (you can delete bits you don't need
later
see Deleting an Original or Playlist
title/chapter on page 47).
You
can
Playlist
1.
VR
add
Original title or chapter to add
even if it is already registered.
title
Choose
menu or
a
title or chapter on the Title List-Original
Chapter List-Original menu to put into the
then press ENTER.
Playlist,
The
to
a
---
The title appears in the Playlist complete with the
chapter markers that appear in the Original. However,
an
menu
options
on
appears
the left side of the
screen.
if you add more chapter markers to the Original later,
these are not automatically copied over into the
Playlist
You
title.
add up to 999 chapters to one disc If you
only want to add a chapter of a title, use the Adding
title/chapter to the Playlist on this page.
1.
can
.
Choose
title or chapter on the Title List-Original
Chapter List-Original menu to put into the
a
menu or
Playlist,
The
a
then press ENTER.
menu
options
appears
on
the left side of the
2.
menu.
2.
Use v / V to select
options
Use v / V to select
[Playlist Add] option
then press
ENTER.
3.
[Playlist Add]
from
menu
then press ENTER.
Choose
a
registered
Title
List-Playlist
to insert
a
title
that is
or
already
chapter, then
press
ENTER.
4.
Repeat steps 1-3
the Playlist.
to add additional title
or
chapter
on
You
can
view the added
List-Playlist
3.
Select
The
on
the
Chapter
then press ENTER.
title appears in the updated Playlist. All
of the title are added to the Playlist.
[New Playlist]
new
chapters
5.
Press RETURN
back to the Title
46
chapters
menu.
(O) to exit,
List-Original
or
MENU/LIST to go
menu.
Deleting an Original
Title/Chapter
or
When you
from the
erase a
title
or
chapter
Playlist
You
menu, you only remove it from the Playlist;
title/chapter remains in the Original menu.
If you choose to delete
a
title
or
Deleting
chapter
can
Part
a
delete
a
HDD
-RWVR
part which you do
RAM
not want in the
title.
Playlist
the
1.
Useb/B/v/Vtochooseatitleyouwantto
delete
from the
The
Original (title/chapter) menu, the title or chapter is
actually deleted from the disc and the remaining time
available for recording increases. Titles/chapters
deleted from the Original are also removed from the
Playlist.
2.
on
the Title List
options
appears
then press ENTER.
the left side of the menu.
menu
on
Select
[Delete Part] option then press ENTER.
(Delete Part) menu appears on the TV screen.
[Start Point] icon is highlighted.
Edit
Example:
Edit
(Delete Part) (HDD)
Note:
It may not be possible to delete
than 5 seconds long.
1.
chapters
that
are
less
Useb/B/v/Vtochooseachapterortitleyou
on the Title List or Chapter List
want to delete
menu
The
then press ENTER.
menu
options
appears
on
the left side of the
screen.
Select
2.
3.
[Delete] option
from the
options
on
the
4.
Title List
playback
and
use
slow-motion to find the
menu.
Example:
Starts
(HDD)
Press ENTER at the
pause step, search and
starting point.
starting point
of the section
you want to delete.
'End Point' icon is highlighted.
The part is indicated
5.
6.
on
the
Progress
Bar.
Use pause step, search and slow-motion to find
the ending point.
Press ENTER at the
select
[Cancel]
of the section
ending point
you want to delete.
You can cancel the selected
point,
use
v / V to
icon then press ENTER.
Tip:
Edit ng
With HDD
Select
Press ENTER to confirm.
3.
The confirm message for
deleting
ENTER, then repeat steps 3-6.
will appear.
Use b / B to select
[Yes] then press ENTER.
The selected chapter or title is deleted.
4.
After
pressing ENTER,
displayed.
5.
Repeat steps
1
-
the new,
updated
menu
7.
is
4 to continue to delete from the
menu.
(O) repeatedly
to exit the
menu.
Notes:
When DVD+RW
is
changed
If
more
titles
If you finish to edit, select
ENTER.
recording,
name
icon then press
menu
appears.
Note:
It may not be possible to delete parts that
than 3 seconds long.
are
less
to 'Deleted Title'.
than two titles
are
the deleted title's
[Done]
The confirm message for deleting will appear.
Use b / B to select [Yes] then press ENTER.
The selected part is deleted from the title and Title
List
Press RETURN
6.
recordings, you can delete additional part.
[Next Part] icon on the menu then press
are
combined into
repeatedly deleted,
the
one.
When you are deleting a title or chapter, only the
last one on DVD+RW increases remaining recording
time.
47
Naming
You
can
Time Search
Title
Playlist
titles
be up to 32 characters
and
long.
Original
can name
Names
1.
a
Choose the title you want to
menu, then press ENTER.
The
options
menu
appears
independently.
RAM
You
name on
the Title List
1.
on
Use v/V to select
[Rename (Title Name)] option
The
2.
3.
menu
select start
-RWVideo
point
of the title.
then press ENTER.
appears on the left side of the
Select
[Time] option
menu
Example:
appears.
-RW VR
+R
options
[Search]
then press ENTER.
Keyboard
can
HDD
-R
Useb/B/v/VtochooseatitleontheTitleList
menu
the left side of the
menu.
2.
+RW
appears
Title List
menu.
then press ENTER.
on
the TV
screen.
(HDD)
Enteranameforthetitle.Useb/B/v/Vto
select
a
character then press ENTER to confirm
your selection.
Use MENU/LIST button to
change keyboard
type.
OK: Select to finish.
Current
Cancel: Cancels all entered characters.
Space:
Inserts
a
space at the
Delete: Deletes the
cursor
previous
cursor
picture
position.
character at the
End time
position.
b / B: Moves
cursor
to left
or
right.
Start time
Selected time
Tip:
Remote control buttons for
PLAY
X
(N):
Inserts
a
entering
space at the
(PAUSE/STEP): Deletes
cursor position.
Selected
a name
position.
cursor
the after character at
3.
x
(STOP),
CLEAR: Deletes the
character at the
cursor
. / >: Moves
Numbers
(0-9):
previous
position.
cursor
to left
or
4.
right.
Enters the
character at the
cursor
corresponding
position.
Tip:
You
can
add the genre
only
for HDD title
4.
Choose OK then press ENTER to fix the
and return to the previous menu screen.
5.
Press RETURN
(O) repeatedly
name.
name
to exit the
menu.
Notes:
Names
can be up to 32 characters long.
For discs formatted on a different recorder, you will
see only a limited character set.
When
recording
on
discs, the entered
player only
48
DVD-R, DVD+R
name
is
displayed
after finalization.
or
DVD+RW
on
the DVD
Use b / B to find the
point you want to start.
increase 1 minute step.
If you press and hold b / B then the point increase
5 minute step.
The
the
point
point
Press ENTER to start selected
point.
Sort
Combining
HDD
This function allows you to
organized by Date, Title,
HDD
menu.
So you
can
access
or
show
Category
on
listings
the Title List-
find title you want to watch
easily.
1.
Choose any title
press ENTER.
The
menu
on
options
the Title List-HDD menu, then
Use this function to combine two
HDD titles into
Use v/V to select
Sort
options
adjacent Original-
one.
Notes:
This function is not available if there is
appears
on
If there
[Sort] option
one
are more
than 60 titles
on
the HDD, you
cannot combine the titles.
then press ENTER.
appears.
only
titles within the HDD.
the left side of the
menu.
2.
Two Titles Into One
HDD
1.
On the Title List-HDD menu, select the first title of
the two titles you want to combine then press
ENTER.
The
menu
options
appears
on
the left side of the
screen.
3.
2.
Select
3.
Select the second title of the two titles you want to
combine then press ENTER.
[Combine] option
then press ENTER.
Use v/V to select [Date], [Title] or [Category]
option then press ENTER.
After pressing ENTER, the sorted menu is
displayed.
Undoing/Redoing
Deletion
-RWVR
the Last
RAM
Confirm message appears.
If you make a mistake while deleting, you can undo it.
There is one level of undo (in other words, you can
undo the last
one
deletion you
made).
4.
Use b / B to select
[Yes] then press ENTER.
pressing ENTER, the updated menu is
displayed.
After
Edit ng
Use v / V to select
[Undo] option then press ENTER.
It doesn't matter whether you are currently in the
menu screen; the last deletion is undone.
Notes:
You can't undo
a recording.
anything after ejecting the disc from the
recorder or switching the recorder into standby mode.
You can still undo a deletion even after exiting the
menu display.
You can't undo
Tip:
You
can
redo the last undo action
using
the
[Redo]
option.
49
Divide One Titles Into Two
HDD
One
Use this command to
1.
split
a
title up into two
On the Title List menu, select
divide then press ENTER.
The
Combining
+RW
menu
options
appears
on
a
new
titles.
title you want to
the left side of the
2.
Select
Title List
into
Into
Chapters
+RW
+R
RAM
adjacent Playlist
or
one.
Note:
This function is not available if there is
1.
[Divide] option.
Example:
Two
-RW VR
Use this function to combine two
Original chapters
chapter
screen.
HDD
On the
chapter
(HDD)
only
one
within the title.
Chapter
List menu, select the second
chapters you want to combine
of the two
then press ENTER
The menu options appears
on
the left side of the
screen.
2.
Use v / V to select
[Combine] option.
The combine indicator appears between the two
chapters you want to combine.
3.
Press ENTER.
Edit (Divide)
highlighted.
Current
menu
appears.
[Divide] option
is
picture
3.
The first title's
thumbnail
The second title's
thumbnail
4.
Use
play, pause step, search and slow-motion
point you want to divide the title.
to
find the
5.
Select
[Divide] option
then press ENTER at the
point.
To reset the
point, select [Cancel] option
Repeat from step 3.
then
press ENTER.
6.
Choose
[Done] option
dividing point.
then press ENTER to fix the
The title is divided into two
new
titles. It take up to
4 minutes to divide.
Note:
You cannot select
50
dividing point
less than 3 seconds.
Press ENTER.
Moving
-RW VR
Example:
Playlist Chapter
a
Title List
(DVD+RW)
RAM
Use this function to re-arrange the playing order of
Playlist chapters on the Title List-Playlist menu.
Note:
This function is not available if there is
only
one
chapter.
Press MENU / LIST
1.
List-Playlist
2.
the
4.
display
to
the Title
List-Playlist options
on
appears
the left side of
menu.
Use vVbBto select
Press ENTER to confirm.
chapter's
screen.
Protect
Chapter
you want to
The
Chapter List-Playlist options
left side of the
the
see
+RW
a
chapter
or
title.
Title
+R
-RW VR
RAM
Use this function to protect
Press ENTER.
5.
title's thumbnail will dim.
Tip
able to
Use vVbBto choose the
or
If you select a hidden chapter or title on the Title List
or Chapter List menu, you can 'show' it by choosing
[Show] option on the menu. After doing that, you are
'Search-Chapter' from Title
List-Playlist options then press ENTER.
Chapter List-Playlist menu appears on the TV
move.
6.
3.
The
Use vVbBto choose the title you want to view
Chapter List-Playlist menu then press ENTER.
Title
3.
repeatedly
menu.
appears
on
the
menu.
Use v / V to select
[Move] option
from
List-Playlist options
then press ENTER.
Chapter
recording, editing
or
against
deleting of the
1.
Press MENU/LIST to
2.
Use vVbBto choose
display
a
accidental
title.
the Title List
menu.
title you want to protect
then press ENTER.
Options
3.
Select
appear
[Protect]
on
the left side of the
from the
screen.
options.
Edit ng
7.
Useb/B/v/Vtochoosetheplaceyouwantto
move the chapter to then press ENTER.
After pressing ENTER, the updated menu is
displayed.
Hide
a
You
skip playing chapters
can
Chapter/Title
or
+RW
+R
titles without
deleting
from the disc.
4.
Press ENTER to confirm.
The lock mark will appears
Use vVbBto choose
to hide
on
the Title List
a
or
chapter
Chapter
the title's thumbnail.
Tip
If you select a title that has already been protected on
the Title List menu, you can 'unprotect' it by choosing
[Protect] option from the Title List menu options. After
doing that,
1.
on
you
can
edit and delete the title.
title you want
List menu, then
or
press ENTER.
Options
2.
Select
appear
on
the left side of the
screen.
[Hide] option.
51
rights owners. Use of this copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other
limited viewing uses only, unless otherwise
authorized by Macrovision corporation. Reverse
engineering or disassembly is prohibited.
Dubbing
Before
Use the
copying
Back up
a DVD.
Make
play
Dubbing
features of this recorder to:
stored
important recordings
DVD copy of a
in another player.
a
Transfer video from
a
on
the HDD to
CONSUMERS SHOULD NOTE THAT NOT ALL
HIGH DEFINITION TELEVISION SETS ARE FULLY
recording
on
the HDD to
COMPATIBLE WITH THIS PRODUCT AND MAY
CAUSE ARTIFACTS TO BE DISPLAYED IN THE
PICTURE. IN CASE OF 625 PROGRESSIVE SCAN
DVD to the HDD for
editing.
PICTURE PROBLEMS, IT IS RECOMMENDED
THAT THE USER SWITCH THE CONNECTION TO
Transfer edited video from the HDD to DVD.
THE 'STANDARD DEFINITION' OUTPUT. IF
The
simplest method of copying is to use the One
Touch Copy feature. Using this you can very simply
copy the title that's currently playing from HDD to
DVD,
or
the other way around.
THERE ARE QUESTIONS REGARDING OUR TV
SET COMPATIBILITY WITH THIS MODEL
625p
HDD/DVD RECORDER, PLEASE CONTACT OUR
CUSTOMER SERVICE CENTER.
Note:
If the title's
length is less than 5 seconds,
(from HDD to DVD)
the
dubbing
is not available.
Restrictions
on
copying
Some video material is copy-once
material cannot be copied to HDD
protected:
or
Such
DVD.
You
can identify copy-once protected material during
playback by displaying disc information on-screen.
NTSC format
analog or the DV
correctly with this recorder.
Video signals in SECAM format (from the built-in TV
tuner or from the analog inputs) are recorded in PAL
inputs
signals
from the
is not recorded
Fast
copying (Maximum 12x)
Copying between DVD and HDD is a completely
digital process and therefore involves no loss of
quality in the audio or video. This means that you can
transfer back and forth without having to worry about
the quality getting worse with each copy 'generation'.
It also means that copying can be carried out at the
maximum speed possible.
When copying from HDD to DVD, the speed of
copying depends on the recording mode and the kind
of DVD disc you're using.
Minimum fast
copying
CPRM is
a copy protection system (with scramble
system) only allowing the recording of 'copy once'
broadcast programs. CPRM stands for Content
Protection for Recordable Media.
recordings
can
only
be made
discs formatted in VR mode
CPRM
are
times
time for 2 hours of video recorded with SP
mode.
What is 'CPRM'?
CPRM
copying
The table below shows the minimum HDD to DVD
format.
on
DVD-RW
DVD-RAM discs, and
be played on players that
or
recordings can only
specifically compatible with
CPRM.
Disc
Disc
Type
Speed
DVD-R / DVD+R
16x
Copying Time
(Record Speed)
6.5 min.
(12x)
DVD-R / DVD+R / DVD+RW
8x
8 min.
DVD+R DL
8x
13 min.
(4x)
DVD-RW
6x
12 min.
(6x)
DVD-RAM
5x
11.5 min.
DVD-R / DVD+R
4x
13 min.
(8x)
(5x)
(4x)
DVD-RW / DVD+RW
DVD-RAM
Copyright
Recording equipment should be used only for lawful
copying and you are advised to check carefully what
is lawful copying in the area in which you are
making a copy. Copying of copyright material such
as films or music is unlawful unless permitted by a
legal exception or consented to by the rights owner.
This
product incorporates copyright protection
technology that is protected by method claims
of
certain U.S. patents and other intellectual property
rights owned by Macrovision Corporation and other
52
17 min
3x
DVD+R / DVD+RW / DVD+R DL
DVD-R / DVD-RW / DVD-RAM
2.4x
21 min.
(3x)
(2.4x)
25 min.
2x
(2x)
Notes:
All times in the above table
are
approximate.
Actual copy speed varies with the part of the disc
being recorded.
There may be cases where even 4x/6x/8x/16x
compatible discs do not copy at full speed.
Fast
copying
initialized
on
may not be possible when
another recorder.
using
disc
Dubbing
1.
from HDD to DVD
On the Title List-HDD menu, select
a
Dubbing
title you want
1.
to dub then press ENTER.
The
menu
options
appears
on
the left side of the
Use v / V to select
[Dubbing] option
then press
(XP, SP, LP, EP,
Fast: See page 52 for
information
on
Fast
menu
appears.
Fast
When
[Start] icon
Dubbing starts.
is
5.
To stop dubbing at any other time, press
STOP (x).
highlighted,
press ENTER.
Notes:
(XP, SP, LP, EP,
Only available when copying VR mode disc
(See page 52 for more information on
copying.)
to HDD.
copying.
4.
When
[Start] icon
Dubbing starts.
is
5.
To stop dubbing at any other time, press
STOP (x).
highlighted,
press ENTER.
Notes:
recording
depending on
time of
[Fast]
data size of
mode could be varied
source.
Stopping dubbing in [Fast] mode partway through
will cancel the recording and any data recorded up
to that point will be lost.
and
then press
Fast),
Fast:
more
4.
The
[Dubbing] option
then press V.
'Start' icon is highlighted.
Fast), then press V.
'Start' icon is highlighted.
If the
the left side of the
Use b / B to select record mode
or
or
[Fast]
on
appears.
Use b / B to select record mode
The
Use v / V to select
Dubbing
menu
3.
3.
appears
title you want to
ENTER.
ENTER.
Dubbing
options
a
screen.
2.
2.
On the Title List menu, select
dub then press ENTER.
Menu
screen.
from DVD to HDD
space on the disc is insufficient, the
mode is not available.
remaining
[Fast] mode is not available
Clip Recording title.
for edited HDD title
Depending on the conditions of the recording
equipment or the disc itself, the dubbing may
capable.
not be
Stopping dubbing in [Fast] mode partway through
recording and any data recorded up
to that point will be lost.
will cancel the
The
recording
time of
[Fast]
mode
can
take up to 19
Dub ing
minutes.
The
[Fast]
mode is not available for edited title
the DVD-RW with VR
recording
on
mode.
53
One Touch
Copy (HDD
to
DVD)
The One Touch
Copy feature copies the currently
playing title from the HDD to DVD. The whole title is
copied, regardless of where in the title you start
copying. The recorder copies at the maximum speed
possible.
For One Touch
Copy
to
work, make
sure
that
a
recordable DVD disc is loaded.
During
HDD
playback,
press DUBBING to copy the
current title to DVD.
The
on-screen display indicates that the title
copied. Playback continues while copying.
You cannot
copy
a
use
the One Touch
Copy
is
being
function to
title if any part of the title is copy-once
protected.
One Touch
One Touch
Copy
Copy (DVD
from DVD to HDD
to
copies
HDD)
a
single
title to the HDD in real time. When you start copying,
playback jumps back to the start of the title, then
continues
through to the end of the title, when
recording automatically stops. The copy will be
in the recording mode (XP, SP, LP, EP) that is
currently set.
During
DVD
playback,
made
press DUBBING to copy the
current title to HDD.
Playback
starts
again
current title. The
title is
from the
on-screen
beginning of the
display indicates that
the
being copied.
Notes:
Video CD cannot be
copied
to HDD.
The
copying stops when then recorder detects
badly scratched or copy protected part.
a
If some part of the title being copied is copyprotected, copying will start, but the copy-protected
portions will not be copied.
During Playlist
title's
playback,
One Touch
Copy
is
not available.
Tip:
To stop
54
dubbing
at any other
time, press STOP (x).
Press TITLE in
2.
Reference
Title List
To overwrite
a new
video
You
can remove
STOP
+RW
recording
Play
or
stop mode.
will appear
as
shown below.
Tip
Additional Information
Overwriting Recording
menu
on a
the Title List
menu
by pressing
(x).
previously
recorded title, follow these steps. This feature is not
available for DVD+Rs, that always record at the end
of the Disc.
1.
Select
input
source
you want to record
(TV
channel, AV1-4, DV).
Press MENU/LIST to
2.
the Title List
display
menu.
To
3.
play
back
a
press ENTER
title, select the title you
or
PLAY
Playing Your Recordings on
Players (Finalizing a Disc)
Most
regular
DVD
players
want then
(N).
play
can
Other DVD
finalized discs
recorded in Video mode, finalized DVD+R or
DVD+RWs. A small number of players can also
3.
Use vVbBto choose
a
title you want to
overwrite.
Overwrite
(z) to start overwrite recording.
recording starts from the start point
check what formats of discs it will
Press REC
4.
Finalizing
Press STOP
The
new
(x)
to
stop the overwrite recording.
title is created and
updated
menu
is
displayed.
Notes:
a
If the overwrite is
the
of the
longer than
current title, the
protected title.
recording
overwriting stops
at the
protected, the
starting point of the
title.
If the selected title's
seconds, the
recording length
next title is overwritten. But if the next
Title List
can
1.
recordings and editings in place
be played on a regular DVD
computer equipped with a suitable DVD-
player
or
can
ROM drive.
Finalizing a Video mode disc creates a menu screen
navigating the disc. The menu can be accessed by
pressing MENU/LIST or TITLE.
To finalize a disc, refer to "Finalize" on page 24.
player
that is
on
displayed on the
capable of playing DVD+RW
menu
DVD+R discs.
Insert DVD+R
Notes:
Unfinalized DVD+RW is
playable
on
regular
DVD
players.
The edited contents of
compatible
on
regular
a
DVD+RW disc is
DVD
players only
after
finalization.
+R
view the Title List
other DVD
or
displayed
or Players
menu
other DVD Recorders
+RW
is less than 10
protected, overwriting stops.
Viewing
You
'fixes' the
that the disc
next title is
overwritten. But if next title is
title is
so
for
This function is not available for
length
play.
of
the title.
5.
play
DVD-RW discs recorded in VR mode, finalized or not.
Check the manual that came with the other player to
Any edited contents of the DVD+R disc are not
compatible on regular DVD players. (Hide, chapter
combine, added chapter mark, etc.)
How long finalization takes depends on the type of
disc, how much is recorded
number of titles
DVD+R DL disc
on
on
the disc, and the
the disc.
can
take up to 30 minutes to
finalize.
or
DVD+RW disc recorded
Refrnce
already.
55
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yo ruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
an area
Area
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
FJ
Maldives
MV
Australia
AU
Finland
FI
Mexico
MX
SG
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Heard and McDonald Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
Hungary
HU
New Zealand
NZ
Sweden
SE
Chile
CL
India
IN
Switzerland
CH
CN
Indonesia
ID
Nigeria
Norway
NG
China
NO
Thailand
TH
Colombia
CO
Israel
IL
Oman
OM
CG
Italy
IT
Pakistan
PK
Turkey
Uganda
TR
Congo
Costa Rica
CR
Jamaica
JM
Panama
PA
Ukraine
UA
Croatia
HR
JP
United States
US
KE
Paraguay
Philippines
PY
CZ
Japan
Kenya
PH
Uruguay
UY
Denmark
DK
Kuwait
KW
Poland
PL
Uzbekistan
UZ
Ecuador
EC
LY
Portugal
PT
Vietnam
VN
Egypt
EG
Libya
Luxembourg
LU
Romania
RO
Zimbabwe
ZW
El Salvador
SV
Russian Federation
RU
Republic
AF
Area
Ethiopia
Fiji
Afghanistan
Argentina
Czech
56
code from this list.
SN
SK
UG
the Radio Stations
Presetting
You
can
Before
preset 50 stations for FM and AM (MW).
make
tuning,
sure
that you have turned down
the volume.
Press FM/AM
2.
And then every time you press FM/AM, FM and
AM (MW) changes alternately.
(MW)
3.
Preset radio stations in the unit's memory first
radio stations" on the left).
on
the remote control until FM
appears in the
or
display
TUN.+ B
frequency
indication starts to
on
window.
5.
on
the remote control.
number will flash in the
Press PR/PRESET
+ or
display
-
repeatedly
Each time you press this button, the Recorder Receiver
one preset station at a time.
Adjust the volume by rotating VOLUME on the
panel or by pressing VOLUME + or on the
remote control repeatedly.
front
-
Press POWER to turn the Recorder Receiver off
window.
PR/PRESET
-
on
select another function mode
To listen to
Use manual
Press ENTER
on
the remote control.
For manual
The station is stored.
Repeat steps
a
Press TUN.- b
3 to 6 to store other stations.
station with
or
tune in the station
TUN.+ B
a
weak
repeatedly
AV 1, AV 2
or
etc.,).
non-preset
radio stations
automatic
in step 2.
or
tuning,
the remote control
signal
tuning
press TUN.- b
or
TUN.+ B
on
repeatedly.
For automatic
TUN.+ B
To tune in
(DVD,
the
preset number you
want.
7.
PR/PRESET
To turn off the radio
Press ENTER
remote control to select the
6.
+ or
the remote control to select the preset station
tunes in
3.
Scanning stops when the Recorder Receiver tunes in a
station. "ST" (for stereo program) appear in the display
preset
FM appears in the
or
you want.
then
change,
Press PR/PRESET
on
the
release.
A
(MW)
window.
The last received station is tuned in.
2.
remote control for about three seconds until the
4.
Press FM/AM until AM
AM
window.
display
Press and hold TUN.- b
or
(see
"Presetting
1.
1.
to the Radio
Listening
seconds
on
on
tuning, press and hold TUN.- b or
the remote control for about three
the remote control.
in step 3 to
manually.
For your reference
To clear all the stored stations
Press and hold ENTER for about five seconds to clear
all the stored stations.
If
an FM program is noisy
Press MO./ST. on the remote control
dis-appears
stereo
effect, but
this button
so
that "ST"
in the
again
display window. There will be no
the reception will improve. Press
to restore the stereo effect.
To
improve reception
Reorient the supplied antennas.
57
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
contacting
service.
Cause
Symptom
Solution
No power.
The power cord is disconnected.
the power cord into the wall
outlet securely.
No
The TV is not set to receive recorder
signal output.
Select the appropriate video input mode
on the TV so the picture from the
recorder appears on the TV screen.
The video cable is not connected
Connect the video cable
picture.
Plug
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
connected with the
equipment
the TV.
on
input
mode
the
on
audio cable is not set to receive
recorder signal output.
audio receiver so you can listen to the
sound from the recorder.
The audio cables
Connect the audio cable
not connected
are
securely.
securely.
The power of the equipment connected
with the audio cable is turned off.
The audio
The
is
playback picture
connecting
The disc is
cord is
damaged.
Turn
the
on
equipment
connected
with the audio cable.
it with
Replace
new one.
Clean the disc.
dirty.
poor.
The recorder does not
start
No disc is inserted.
Insert a disc. (Check that the disc
indicator in the display window is lit.)
playback.
An
unplayable
disc is inserted.
Insert
a
playable
disc.
(Check
the disc
type, color system, and regional code.)
The disc is
placed upside
The disc is not
placed
down.
within the
playback
side
Place the disc on the disc tray
inside the guide.
correctly
guide.
Clean the disc.
The disc is
dirty.
The
level is set.
Rating
Place the disc with the
down.
Cancel the
the
The picture from the
external input is
distorted
The video
from the external
Some channels are
skipped over when
Those channels
recorder.
are
picture or sound of
broadcasting channel is
weak or missing.
Aerial
are
Camcorder
Camcorder is off.
signal
component is copy-protected.
not stored in the
rating
Rating
function
or
change
level.
You cannot connect via this recorder.
Connect the component directly to
your TV.
Restore channels. See
on
"Program
Edit"
page 19.
usingv/V.
The
image
is not
image
via
or
cables
Tighten
loose.
Turn camcorder
A/V
input
or
on
or
replace
cable.
and operate
properly.
shown.
Camcorder
connections
The recorder's
source
is incorrect.
Use AV to select
input
channel
(AV1,
AV2, DV, etc.)
DV IN to
recorder is not shown
TV screen.
on
Radio stations cannot
The antenna is
be tuned in.
connected
CHECK CABLE appears
in the Display window.
58
positioned
poorly.
or
The system cable is connected
incorrectly.
Connect the antenna securely.
Adjust the antennas and connect
an
external antenna if necessary.
Check the status of connection and
connect the
system cable securely.
Cause
Symptom
Solution
Cannot
The disc
recorder
Some players will not play even a
finalized disc recorded in Video mode.
No solution.
The disc
The other
play a disc
recorded using this
on
another
player.
recorded in Video mode.
was
was
recorded in VR mode,
Finalize the disc.
(page 24)
player must be RW
compatible in order to play it.
Discs recorded with copy-once material
played on other players.
No solution.
The
Use another disc.
cannot be
Cannot record
not record
or
did
blank space
remaining
The
source
are
you
copy
protected.
When
setting
the
When
protected
recording
possible.
is not
on
recording
programs that
trying
to record is
recording channel,
channel is tuned
Timer
the
on
disc is insufficient.
successfully.
the TV's
to
a
own
the
Select the channel
Video mode disc,
copy-once
cannot be recorded.
the recorder 's
Use a VR mode formatted disc for
copy-once material.
Clock in recorder is not set to correct
Set clock to correct time. See "Clock
time.
Set"
programmed
Timer record indicator
appear after
TV is not
light does
programming timer.
page 20.
Reprogram
not
Timer. See "Timer
page 40.
on
Timer.
No solution.
Stereo-compatible.
Broadcast program is not in stereo
format.
The recorder A/V Out
on
Reprogram
Recording"
incorrectly.
present.
on
source.
built-in TV tuner.
tuner.
are
Timer has been
Stereo Audio Record
and/or Playback is not
You cannot record the
jacks are
jacks.
No solution.
Make A/V connections. Stereo is
not
connected to TV A/V In
available
recorder.
The recorder Audio/Video Out is not
selected for viewing at the TV.
Select AUX
The recorder's TV audio channel is
Set TV audio channel mode to Stereo.
set to
See
only
or
via A/V output from the
A/V
source as
TV
input.
mono.
"Changing
TV audio channel"
on
page 39.
The remote control
does not work
properly.
The remote control is not pointed at
the remote sensor of the recorder.
sensor
The remote control is too far from the
Operate
recorder.
7m.
There is
an
obstacle in the
path
Point the remote control at the remote
of the recorder.
of the
the remote control within
Remove the obstacle.
remote control and the recorder.
The batteries in the remote control
are
Resetting
the recorder
If you observe any of the
The unit is
on or
following symptoms...
but the power will not turn
off.
The front
The
plugged in,
Replace
the batteries with
new ones.
exhausted.
panel display is not working.
recorder is not operating normally.
...you
can
reset the recorder
as
follows:
Refrnce
Press and hold the POWER button for at least five
seconds. This will force the unit to power off then
turn the unit back
on.
the power cord, wait at least five seconds,
and then plug it in again.
Unplug
59
Specifications
General
Power
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Operating humidity
Power
Television system
Recording format
AC 200-240V, 50/60 Hz
35W
440 X 55 X 280
4.6
mm
(w
x
h
x
d)
without foot
kg
5˚C to 35˚C
5 % to 90 %
PAL I, B/G, I/I, SECAM D/K, K1 colour system
PAL
Recording
Recording
format
Recordable media
Recordable time
recording format
Sampling frequency
Compression format
Audio recording format
Sampling frequency
Compression format
DVD Video
Recording, DVD-VIDEO
(80GB), DVD-ReWritable, DVD-Recordable, DVD+ReWritable,
DVD+Recordable, DVD+Recordable (Double Layer), DVD-RAM
DVD (4.7GB): Approx. 1 hour (XP mode), 2 hours (SP mode),
4 hours (LP mode), 6 hours (EP mode)
DVD+R DL (8.5GB): Approx. 3 hour (XP mode),
3 hours 40 minutes (SP mode), 7 hours 10 minutes (LP mode),
10 hours 30 minutes (EP mode)
HDD (80GB, MPEG2 Recording): Approx. 21 hours (XP mode),
41 hours (SP mode), 81 hours (LP mode), 114 hours (EP mode)
HDD
Video
27MHz
MPEG2
or
MPEG4
(HDD only)
48kHz
Dolby Digital
Playback
Frequency
response
Signal-to-noise
ratio
Harmonic distortion
Dynamic
range
DVD
(PCM 48 kHz): 8 Hz to 20 kHz, CD: 8
DVD(PCM96kHz):8Hzto44kHz
More than 100 dB (AUDIO OUT connector)
Less than 0.008% (AUDIO OUT connector)
More than 95 dB (AUDIO OUT connector)
Hz to 20 kHz
Inputs
Audio
input (optical audio)
AERIAL IN
VIDEO IN
AUDIOIN
DV IN
3 V
(p-p), 75 Ω, Optical connector x 1
input, 75 ohms
1.0 Vp-p 75 ohms, sync negative, RCA jack x 2 / SCART x 2
0dBmmorethan47kohms,RCAjack(L,R)x2/SCARTx2
4 pin (IEEE 1394 standard)
Aerial
Outputs
VIDEO OUT
S-VIDEO OUT
COMPONENT VIDEO OUT
Audio output
60
(analog audio)
1 Vp-p 75 Ω, sync negative, RCA jack x 1 / SCART
(Y) 1.0 V (p-p), 75 Ω, sync negative, Mini DIN 4-pin
(C)0.3V(p-p)75Ω
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
2.0 Vrms (1 KHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
x
2
x
1
/ SCART
x
2
Amplifier
Stereo mode
45W
Surround mode
(Rated Output Power 30W, 4Ω at
45W (Rated Output Power 30W,
+
1
kHz, THD 10 %)
THD 10
%)
Center*: 45W
(* Depending on the sound mode
settings and the source, there
may be no sound output.)
Tuner
45W
+
Front: 45W
Surround*: 45W
+ 45W (Rated Output Power 30W,
4Ωat1kHz,THD10%)
Subwoofer*: 75W (Rated Output Power 60W, 8Ω at
30
Hz, THD 10 %)
Specifications
65.0
Tuning Range (FM)
Frequency (FM)
Signal-to-noise ratio
Tuning Range (AM)
Intermediate Frequency (AM)
Intermediate
74.0
-
MHz, 87.5
-
108.0 MHz
10.7 MHz
60 dB
522
-
(Mono)
1,611 kHz
450 kHz
Antenna
Wire antenna
Loop
antenna
(FM)
(AM)
Speakers
Front/Satellite/Center
(LHS-36SE5S)
1 Way 1 Speaker
Type:
Impedance: 4 Ω
Frequency Response: 150 20,000 Hz
Sound Pressure Level:
85 dB/W (1m)
Max. Input Power:
90W
105x99x83mm
NetDimensions(WxHxD):
Net Weight:
0.45 kg
Active Subwoofer
(LHS-36SE5A)
50W
consumption:
1 Way 1 Speaker
Type:
8 Ω
Impedance:
40
1,500 Hz
Frequency Response:
Sound Pressure Level:
82 dB/W (1m)
Max. Input Power:
150W
Net Dimensions (WxHxD):
236 x 450 x 366 mm
Net Weight:
14 kg
Power
-
(the date of the production of goods).
figure ( of the left ) of series number means Year,
Month of the production of this goods.
-
Notice
First
-
Design
and
specifications
are
subject
to
change
next 2
figures
without notice.
61
P/NO
:
MFL30582471
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising