LG LPX-M930A Owner's manual

LG LPX-M930A Owner's manual
PETERSBURG_LPX-M930/M935(ENG)-27M
CD/RADIO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL: LPX-M930A/X/S
LPX-M935A/X/S
Please read this manual
carefully
before
operating
your set.
Retain it for future reference.
Designs
and
specifications are subject
improvement.
to
without notice for
CD-R/RW
change
Precautions
CAUTION
Use of controls
CAUTION
procedures
RISK OF ELECTRIC
or
adjustments or performance of
specified herein may
other than those
result in
hazardous radiation exposure.
SHOCK DO NOT OPEN
Laser
tion
component in this product is capable
exceeding the limit for Class 1.
of
radia-
emitting
CAUTION:TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE
COVER(OR BACK)
NO
USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION:INVISIBLE LASER RADIATION WHEN OPEN
AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO
BEAM.
VARNING:OSYNLIG LASERSTRALNING
DEL AR OPPNAD STRALEN AR FARLIG.
Attention:Quand
Explanation Graphical Symbols:
The
an
lightning flash with
equilateral triangle
arrowhead
within
symbol,
is intended to alert the
to the presence of uninsulated
product's enclosure that may be of suffimagnitude to constitute a risk of electric
point
is intended to alert the
important operating
instructions in the
within
user
an
l'appareil
est
ouvert,
ne
pas
radiations invisibles du faisceau laser.
This label is located
shock to persons.
The exclamation
aux
DENNA
user
dangerous voltage
within the
cient
s'exposer
NAR
equilateral triangle
to the presence of
and
maintenance(servicing)
literature accompanying the
appliance.
on
the interior.
CLASS 1
LASER PRODUCT
KLASSE 1
LASER PRODUKT
LUOKAN 1
LASER LAITE
KLASS 1
LASER APPARAT
CLASSE 1
PRODUIT LASER
This
Disc
player is
classified
CLASS 1 LASER
WARNING
Compact
product.
TO REDUCE THE RISK OF FIRE OF ELECTRIC
The CLASS 1 LASER PRODUCT label is located
SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOIS-
as a
on
the
exterior.
TURE.
To avoid electrical
icing
The
to
qualified
shock, do
not open the
cabinet, Refer
serv-
shall not be
This
product is manufactured
requirements of EEC
ference
personnel only.
to
with the radio inter-
comply
DIRECTIVE
89/336/EEC,
93/68/EEC and 73/23/EEC.
to
apparatus
exposed
dripping
splashing and that no objects filled with liquids,
shall
on
the
be
vases,
placed
apparatus.
or
such
as
Do not install this
book
equipment
in
a
confined space such
a
case or similar unit.
Table of Contents
INTRODUCTION
Precautions/TableofContents................2
BeforeUse.................................3
SafetyPrecautions.........................3
NotesonDiscs............................3
NotesonTapes...........................3
FrontPanel................................4
RearPanel/DisplayWindow...................5
RemoteControl.............................5
OPERATION
PowerSource...............................6
TheACPowerCordConnection..............6
BatteryInstallation.........................6
.6
Adjustingthevoltage(OPTIONAL).
SpeakerConnection........................6
AudioAdjustment...........................7
VolumeAdjustment.........................7
UBB/EQAdjustment.......................7
SettingtheCLOCK...........................7
.
.
.
.
.
.
.
.
.
.
SLEEPFunction.............................7
SettingtheTIMER...........................8
OtherFunction..............................8
2
RadioOperation.............................9
Presettingtheradiostations..................9
Listeningtotheradio.......................9
TapeOperation..............................9
BasicPlayback............................9
ToPausePlay/ToStopPlay.................9
.9
ToPlayRewindorFastForward.
ContinuousPlay...........................9
CD/MP3Operation..........................10
BasicPlayback...........................10
ToPausePlay...........................10
ToStopPlay.............................10
ToSkiptheTrack.........................10
.
.
.
.
.
.
.
.
.
.
.
.
ToSearchtheTrack.......................10
ToRepeatPlay...........................10
ToProgramPlay..........................10
Recording.................................11
BasicRecording..........................11
CDSynchronizedRecording................11
Specifications......................BackCover
Before Use
Safety Precautions
shipping the unit
The
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
To
discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the unit
Handling
When
Cleaning
the center out.
keep the surface clean
Do not
use
volatile
liquids,
such
as
the unit. Do not leave rubber
near
contact with the unit for
leave marks
Cleaning
a
insecticide spray,
or
long period
plastic products in
of time. They will
the surface.
on
a
soft, dry cloth. If the surfaces
soft cloth
use a
lightly
solution. Do not
benzine,
or
use
thinner,
are
moistened with
a
extremely dirty,
mild detergent
strong solvents, such
as
these
as
might damage
alcohol,
the surface
on
Notes
analog
on
Tapes
Preventing
record
records.
Removing the tab(s) of the cassette (with
driver) will prevent accidental erasure.
of the unit.
Notes
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for
the unit
To clean the cabinet
Use
Do not
a
small
screw-
Side A
Discs
Tab for side A
Handling
discs
Do not touch the
Hold the disc
get
on
by
playback side of the disc.
edges so that fingerprints
the
will not
Tab for side B
the surface.
Do not stick paper
or
tape
on
the disc.
To record
again,
cover
the hole of the tab with adhesive
tape.
Storing
After
discs
playing,
store the disc in its
case.
Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct
as there may be
increase inside the car.
sunlight,
a
Adhesive tape.
considerable temperature
3
INTRODUC
Front Panel
LPX-M930A/X/S Model
18
1
17
2
16
15
14
3456789
13
12
11
910
LPX-M935A/X/S Model
18
1
17
2
16
15
14
3456789
13
12
11
910
1.
REMOTE SENSOR
2.
POWER
3.
?
4.
button
MEMORY button
?
PROG./SET button
?
PRESET
?TIME(
5.
(STANDBY/ON)
) buttons
)buttons
/
MICROPHONE(MIC)
6.
HI-DUBBING
7.
TAPE DOOR
8.
?
SOCKET
(
)
button
11.
button
CD SKIP/SEARCH
/
10.
?
?
RECORD
(
TAPE PLAY
REC)
(
4
TAPE PLAY
button
?
TAPE PAUSE
?
button
ST/EJ)
(
PAUSE)
button
PLAY DIRECTION
(
DIR)
(LPX-M935A/X/S model)
button
MODE/RIF/REPEAT button
?
TIMER button
?
CLOCK button
)
buttons
14. VOLUME
TAPE)
button
/
?PLAYMODE(
(LPX-M935A/X/S model)
?
F.FWD)
(TAPE
B
(
/
)
DECK)
button
15. FUNCTION SELECT
button
PLAY)
button
(
13. UBB button and indicator
(
LEFT/RIGHT SPEAKER
REW)
TAPE STOP/TAPE DOOR OPEN
12. TAPE DOOR
?
?
(
?
( 3.5mm)
?CDSTOP( )button
TUNING (-/+) buttons
9.
FAST FORWARD
?
ON/
(
OFF)
(TAPE A DECK)
CD PLAY/PAUSE
REWIND
?
(
/
(
?
PLAY
(
)
(LPX-M935A/X/S model)
)button
button
buttons
or
(TUNER/BAND, CD/MP3,
indicator
16. DISPLAY WINDOW
17. CD DOOR OPEN
18. CD DOOR
(
)
button
Rear
Panel/Display Window
1
891 011
12
13
TIMER OFF
STEREO
7
MEMORY
2
TIMER ON
MP3
INTRODUC
6
ROCK
FLAT
CLASSIC
SYNCHRO
SLEEP
REPEAT 1 ALL
17
16
15
345
1.
FM ANTENNA
10. MP3 indicator
2.
SPEAKER RELEASE LEVER
11. TIMER ON indicator
3.
BATTERY COMPARTMENT
12. TIMER OFF indicator
4.
AC POWER INPUT SOCKET
13. STEREO indicator
5.
VOLTAGE SELECTOR
14.
6.
SPEAKER INPUT SOCKET
(OPTIONAL)
EQUALIZER PATTERN
(FLAT, ROCK, CLASSIC, POP)
(R/L)
15.
indicator
REPEAT indicator
7.
HEADPHONE SOCKET
8.
CD PLAY/PAUSE indicator
16. SLEEP indicator
9.
MEMORY indicator
17. CD SYNCHRO
(OPTIONAL)
14
POP
recording
indicator
Remote Control
11
1
10
1. POWER button
2. PRESET
(
/
button
)
3. SLEEP button
2
3
789
4
4. CD FUNCTION buttons
?
?CDSTOP(
?
6
CD PLAY/PAUSE
(
)
button
)button
CD SKIP/SEARCH
(
/
)
button
5. NUMBER buttons
6. CD REPEAT button
7. PROGRAM button
5
8. TUNER/BAND button
9. VOLUME
(
/
)
button
10. MUTE button
11. EQUALIZER
(EQ)
button
5
Power Source
The AC Power Cord Connection
connecting the AC power cord, check
that the operating voltage of your unit is
identical with the voltage of your local power
supplied.
1
Connect
2
one
(supplied)
Plug
before
the AC power cord.
connecting
Connection
To attach the
1
2
the other end into the wall outlet.
voltage (OPTIONAL)
If your unit is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
Speaker
end of the AC power cord
to the AC IN socket located at the
backside of your unit.
3
the
Adjusting
Before
Position the
ribs
on
speaker
speaker guide
slots with the
guide
the unit.
Gently push the speaker downwards until the
speaker release lever automatically locks the
speaker into place.
ote
Unplug
the AC power cord from the wall outlet if you
use for an extended period of time.
do not to
Battery
Installation
3
UNIT
Press and open the
1
2
battery
Plug the right and left speaker leads into the
speaker socket and "L" speaker socket
"R"
located at the backside of your main unit.
cover.
eight "D" (R20) type batteries and four "AA"
(R6) type batteries into the compartment making
sure the
and
are correctly positioned.
Put
Replace
3
the
battery
cover.
1
1
2
2
To detach the
1
2
Remote Control
Press and open the
1
2
3
Put two "AAA"
battery
cover.
the
To avoid
damage
cover.
from
?
an
When the batteries
with
?
During
are
unit
weak, replace all the batteries
the AC power cord connect to the wall outlet,
are
speaker
not
worn
out.
leads.
release lever and slide the
up.
1
new ones.
the batteries
6
possible battery leakage,
plan to use the
the batteries if you do not
extended period of time.
remove
for
Press the
speaker
speaker
speaker
2
battery
ote
?
the
(R03) batteries into the
compartment.
Replace
Unplug
Audio
Volume
Adjustment
Adjustment
Press VOLUME
(Unit:
) to
Remote control:
UBB / EQ
Remote control:
,
)
to increase the sound
level,
or
press the VOLUME
(Unit:
,
decrease it.
Adjustment
UBB
Repeatedly press
UBB to
emphasize
the bass sound.
"UBB ON" indicator appears in the display window.
To cancel it, press this button again.
"UBB OFF" indicator appears in the
display
window.
EQ
Repeatedly press
EQUALIZER
(EQ) [Remote control]
to select
one
of four sound effect
(FLAT, ROCK,
CLAS-
SIC, POP).
The EQ indicator will be shown in the
Press CLOCK.
(If
the clock is
CLOCK for
2.
Select
a
pressing
requires setting, press
more than 2 seconds.)
and hold
12 hour
TIME
control:
cycle or 24 hour cycle by
(unit: / ) or PRESET (remote
/) buttons.
(12HR)
3
window.
the CLOCK
Setting
1
display
(24HR)
or
Press SET to confirm the selected hour
4
5
6.
7
8
Use TIME
trol:
(unit:
/
)
or
PRESET
(remote
con-
to set the correct hours.
/)
Press SET.
Use TIME
trol:
(unit:
/
)
or
PRESET
(remote
Press SET and the correct time is shown
the
con-
to set the correct minutes.
/)
on
display.
Press CLOCK at any time to
for about 5 seconds.
display
the time
cycle.
SLEEP Function
When the
1
To
sleep
specify
timer is used, the power is
the time
delay
automatically
before the power is
turned off, press SLEEP.
In the
display
window you
about 5 seconds. This
turns off
automatically
can see
"SLEEP 90" for
that the system
after 90 minutes.
means
Each time the button is
pressed the time interval
by 10 minutes. i.e.
before it turns off is reduced
80...70... etc.
Select the desired time to turn off.
turned off after the
2
specified
To check the
time has
remaining
elapsed.
time until the power is
turned off.
While the
sleep function is active
briefly. The time remaining until it
played for about 5 seconds.
press SLEEP
turns off is dis-
ote
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until "SLEEP 10" appears, and then press
SLEEP
once
again
while "SLEEP 10" is
displayed.
7
OPERATION
the TIMER
Setting
?
This function is
?
Select your desired radio station
automatically
turned
or
on
and off at the time you want.
press CD and load
a
disc.
Press CLOCK to check the current time.
1
For your reference
If you don't set clock, timer function doesn't work.
Press TIMER to enter the timer
2
mode.
setting
"TIMER ON" appears in the display window.
"TUN-CD" flash in the display window in turn.
The
previous
memorized timer
TIMER indicators appear in the
on
time and
"TIMER ON" appears in the display window.
(If you select "TUNA", select a station you want
TIME
(
/
4
5
by
).
Set the hour to switch
on
the minute
10 Set
(/).
11
Adjust the
12 TIME(
).
13
volume level
/
Switch the system off.
The selected function is
and off at the time set.
To cancel
setting
Press SET to confirm the hour to switch
Set the minute to switch
/
TIME(
on
on.
by pressing
).
Press SET to confirm the minute to switch
"TIMER OFF" appears in the
window.
to switch off
by pressing TIME
by pressing
or
automatically
switched
on
check the timer
Each time the TIMER button is pressed you can select
the timer set or cancel. You can also check the timer
by pressing TIME
(/).
6
7
Press SET to confirm the hour to switch off.
14
flashing.
pressing
by pressing
).
Press SET.
"TIMER ON TIMER OFF" appears in the display
window and the timer setting has been completed.
display)
Press SET when the desired function is
3
/
TIME(
Press SET.
you want to correct the previous memorized
TIMER setting, press and hold the TIMER button
more than 2second
(If
-
Set the hour to switch off
8
9
status.
To activate or check the timer, press the TIMER
button so that "TIMER ON TIMER OFF" appears in the
display window.
To cancel the TIMER, press the TIMER button so that
"TIMER ON TIMER OFF" disappears in the display
window.
on.
display
ote
The unit
can
also set the clock function in power off
state.
Other Function
Headphone Socket (optional)
?
?
Connect
DUBBING
headphone plug ( 3.5mm)
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
a
stereo
into the
when
1
Using Microphone
You
sing to a music source by connecting
microphone ( 3.5mm) to the unit.
can
Connect your microphone (not
MICROPHONE (MIC) SOCKET.
1
2
3
Sing along
a
a
supplied)
music you want.
Play
with the
For your reference
can record during
accompaniment.
using microphone.
"Recording" explanation section.
?You can't record with microphone during normal
speed or double speed dubbing.
8
to the
2
3
4
To
?You
-
This function shows how to record from tape to tape at
normal speed or double speed.
Refer to the
Insert
a
playback tape
and insert
a
blank
to dub into TAPE B DECK
tape into TAPE A DECK.
Press HI DUBBING
select normal
(
speed
Press TAPE PAUSE
(R EC)
(
ON/
or
double
PAUSE)
OFF) button
speed.
and RECORD
of TAPE A DECK.
Press TAPE PLAY [
PLAY or
PLAY
(LPX-M935A/X/S model)] of TAPE B DECK.
stop dubbing, press TAPE STOP (
TAPE A and B DECK.
to
/ST)
of
Radio
You
can
Operation
preset 50 stations for FM, AM (MW) and SW (OPTIONAL). Before tuning, make
the radio stations
Presetting
Press TUNER/BAND
1
(unit
or
control)
remote
to
select radio function.
Every time you press
changes atternately.
Select
this button, FM and AM
station you want
buttons.
2
a
(- / +)
Tuning
by pressing
TUNING
in
manually
(- / +) briefly and repeatedly.
Tuning in automatically
Press TUNING (- / +) for more than 1 second.
Scanning stops when the unit tunes in a stations.
Press TUNING
-
Press MEMORY.
3
A preset number will flash in the
Press PRESET
4
(
/
)
on
( / ) on the remote control
preset number you want.
Press MEMORY
5
6
display
the unit
window.
Listening
1
2
1
Follow
)
appears
to the radio
1-2 as left side.
steps
Adjust the volume by pressing VOLUME ( / )
/
buttons [unit] or VOLUME (
) [remote control].
To turn off the radio
Press POWER (STANDBY/ON) to turn the unit off
select another function mode (CD, TAPE).
or
For your reference
to select the
?
If
FM stereo broadcast is
an
Press MODE/RIF/REPEAT
noisy
that "STEREO"
so
pears in the display window., but the
improve. Press MODE/RIF/REPEAT
again.
disapreception will
again to restore
the stereo effect.
(or 2)
to 5 to store other
ote
stations.
To delete all the memorized stations
Press and hold MEMORY
two
( / ) [unit] or PRESET ( /
[remote control] until the desired preset number
or press it repeatedly.
The station is stored.
Repeat steps
presets
Press PRESET
PRESET
or
that you have turned down the volume to the minimum.
sure
To recall
on
the front
Adjust
?
for better
seconds, "DEL" appears in the display window and
then press MEMORY
again,
the stations
are
deleted.
more
clear
reception.
This antenna is built within the unit and rotate the unit
for about
panel
the antenna to get
AM antenna
?
reception.
FM antenna
Pull the
telescopic
antenna out and
and direction for better
adjust
the
angle
reception.
Tape Operation
Basic
1
2
Press TAPE button to select
tape function.
"TAPE" appears in the
window.
display
the cassette door
Open
DOOR OPEN
Insert
3
Continuous
Playback
a
by pressing
ST/EJ) button.
(
[ PLAY or
(LPX-M935A/X/S model)] button.
a
PLAY
AUTO STOP (LPX-M930A/X/S model)
plays only front side, the unit
stops automatically.
After auto stop deck
AUTO REVERSE (LPX-M935A/X/S model)
Both sides of
Press the button
at the end of the
To
( PAUSE) button to pause.
again to resume play.
To
Stop Play
Play
change
a
cassette
ST/EJ) button
(
or
to
stop play.
Fast Forward
pressing REWIND/ FAST FORWARD (
REW/
F.FWD) button during playback, press
TAPE PLAY [ PLAY or
PLAY
(LPX-M935A/X/S
model)] at the point you want.
To select
tape
the
Press DIR
Rewind
or
,
Play
Press TAPE STOP
(LPX-M935A/X/S model)
by pressing PLAY MODE and then press TAPE PLAY
( PLAY ) and PAUSE ( PAUSE) of TAPE B DECK.
After the cassette in the deck A is finished playback
the cassette in deck B is played automatically.
Press TAPE PAUSE
To
Play
cassette into each deck and set to
-
cassette and close the TAPE door and
then press TAPE PLAY
To Pause
TAPE
Insert
After
playback side
during playback.
play
direction
by pressing
Both sides of
a
automatically
at the end of
?Settothe
-
played and stops automatically
continuously.
are
button
?Settothe
-
or
Both sides of
cassette
PLAY MODE.
are
by pressing
a
cassette
played
and
stopped
tape.
are
PLAY MODE.
played continuously.
9
OPERATION
CD/MP3
Basic
1
2
Operation
Playback
Press CD/MP3 button to select CD/MP3 func-
To
Program Play
tion.
You
can
Press CD DOOR OPEN
disc
()to open the
Load
a
disc with the
close the disc
printed
side
be shown in the
MP3 CD
the
:
display
up and
playing
time will
window.
The total number of files will be shown in
window.
display
Press CD PLAY/PAUSE
4
facing
compartment.
Audio CD: The total track number
) button
(
to
begin
play.
To Pause
Play
Press CD PLAY/PAUSE
) button
(
to pause
during
playback.
When
a
track is
paused,
Press CD PLAY/PAUSE
"
"
(
will appear in the display.
) button again to resume
play.
1
2
3
4
5
Stop Play
Press CD STOP
To
?
Skip
) button
(
once
(
midway through
pressed again, a track
button is pressed.
a
) button is
track, the player
is
skipped
pressing and holding CD SKIP/SEARCH
(/) b utton during playback, then
release at the point you want.
After
ote
This function is not available to
play
a
MP3 file.
Repeat Play
play
one
track
repeatedly
Press MODE/RIF/REPEAT button
button
-
(remote control)
once
"REPEAT 1" appears in the
To
play
all tracks
(unit) or REPEAT
during playback.
display.
repeatedly
Press MODE/RIF/REPEAT button
button
-
(remote control)
(unit) or REPEAT
again during playback.
the display.
button
"REPEAT ALL" appears in
To cancel
repeat play
Press MODE/RIF/REPEAT button
button
(remote control)
button
back.
-
Repeat
10
indicator
/
(
)
Press PROG./SET
Repeat
1~3.
Press CD PLAY/PAUSE
Press PROG./SET
(
).
on
the stop mode.
The track and program number will be
disappears.
1.
displayed.
on
the stop mode.
(
).
(unit)
once more
or
REPEAT
during play-
Press PROG./SET
repeatedly
on
the program stop
mode until track number blinks.
2~5as above.
2.
Repeat
To
modify progr am
1.
Press the PROG./SET to
each time the
To Search the Track
To
Press CD SKIP/SEARCH
buttons to select the track.
to go
returns to the start of that track. When it is
To
the stop mode.
To add program contents
When CD SKIP/SEARCH
pressed
on
And then press CD STOP
to the next track.
?
Press PROG./SET
Press PROG./SET
the Track
Press CD SKIP/SEARCH
contain up
To clear program contents
) button during playback.
(
the discs and
To check program contents
-
To
on
can
to 20 tracks.
compartment.
3
arrange the order of the tracks
own program. The program
create your
you want to
2.
Repeat
contents
display
program number
modify.
2~4as above.
ote
In addition, this unit can
contains audio titles.
play
a
CD-R
or
CD-RW that
Recording
Wind the tape to the
Basic
1
2
3
point recording
starts.
normal
Recording
Select
a
function
(TUNER
or
CD/MP3) you
wish
tapes.)
3
-
the cassette TAPE A and insert
Open
cassette into the cassette
Press RECORD
TA PE PLAY
(
automatically.
Press RECORD
-
(
blank
button is
The
synchronized recording
cally
after about 7 seconds.
To pause
TUNER
4
CD
Synchronized Recording
or
(RADIO).
To
(
PAUSE)
automatically
programmed
records
an
selection of tracks onto
entire CD
a
or
function.
a
is started automati-
(
PAUSE)
again
button
button. Press TAPE
to
resume
recording.
(Your cassette
the tape.)
(
/ST) button.
automatically stop
deck will
at the end of
cassette.
Press CD/MP3 button to select the CD/MP3
Load
display
stop recording
Press TAPE STOP
This feature
the deck A
recording
Press TAPE PAUSE
pressed
PAUSE
CD/MP3
on
compartment.
REC) button.
PLAY)
playing your
a
REC) button
(
"SYNCHRO" indicator will be shown in the
window.
to record.
Start
1
2
(Use only
disc and insert the blank cassette into
deck A
ote
If you wish to record from the desired track, select the
desired track with CD SKIP/SEARCH (
/)
button before
commencing
CD
recording.
If you wish to record a programmed selection of
tracks, program them now
11
OPERATION
Specifications
Power
Power
FM
SW AM (OPTINAL)(MW
[TAPE]
Designs
P/NO
:
of the unit.
5.6kg
External dimensions
[CD]
panel
30W
Mass
[Genral]
[Tuner]
Refer to the back
supply
consumption
(W
x
H
x
D)
283.2
x
231.6
x
247.8
mm
Output Power
Speakers
Battery Operation
Frequency response
Signal-to-noise ratio
5WX2
T.H.D
0.7 %
Tuning Range
Intermediate Frequency
87.5 -108 MHz
Antenna
Telescopic
Tuning Range
Intermediate Frequency
522-1611kHzor530-1610kHz
3.2ΩX2
DC 12V,
100
-
eight "D"(R20)
batteries
60 dB
or
65
-
74
antenna
450 kHz
Ferrite bar antenna
Tuning Range
Intermediate Frequency
5800 -18000kHz
Antenna
Telescopic
Recording System
Frequency Response
Signal to Noise Ratio
4 Tracks 2 channel stereo
specifications
3834RC0027M
are
subject
MHz, 87.5 -108 MHz
10.7 MHz
Antenna
and
(not supplied)
18000 Hz
450 kHz
125
-
8000Hz
40/45dB
to
change
antenna
(REC/PLAY)
without notice.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement