LG | NB2338A | Owner's Manual | LG NB2338A Owner's manual

LG NB2338A Owner's manual
ENGLISH
OWNER’S MANUAL
SOUND BAR
Please read this manual carefully before operating your set and retain it
for future reference.
NB2338A
NB2338A-N0_DRUSLL1_ENG.indd 1
2013-05-07
2:52:57
NB2338A-N0_DRUSLL1_ENG.indd 2
2013-05-07
2:52:57
1
Getting Started
Getting Started
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
NB2338A-N0_DRUSLL1_ENG.indd 3
CAUTION concerning the power cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. hen installing the product, ensure
that the plug is easily accessible.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
NOTICE : For safety marking information including
product identification and supply ratings, please
refer to the main label on the bottom of the
apparatus.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
2013-05-07
2:52:58
4
Getting Started
Disposal of your old appliance
1
Getting Started
1.When this crossed-out wheeled bin
symbol is attached to a product it
means the product is covered by
the European Directive 2002/96/EC.
2.All electrical and electronic products
should be disposed of separately
from the municipal waste stream
via designated collection facilities
appointed by the government or
the local authorities.
3.The correct disposal of your
old appliance will help prevent
potential negative consequences
for the environment and human
health.
4.For more detailed information about
disposal of your old appliance,
please contact your city office,
waste disposal service or the shop
where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled
bin symbol is attached to batteries/
accumulators of Your product
it means they are covered by
European Directive 2006/66/EC.
2. This symbol may be combined with
chemical symbols for mercury(Hg),
cadmium(Cd) or lead(Pb) if the
battery Contains more that 0.0005%
of mercury,0.002% of cadmium or
0.004% of lead.
3. All batteries/accumulators should
be disposed separately from
the municipal waste stream via
designated collection facilities
appointed by the government or
the local authorities.
4. The correct disposal of Your old
batteries/accumulators will help
to prevent potential negative
consequences for the environment,
animal and human health.
5. For more detailed information
about disposal of Your old batteries/
accumulators, please contact Your
city office, waste disposal service or
the shop where You purchased the
product.
The equipment complies with requirements of the
Technical Regulation, in terms of restrictions for the
use of certain dangerous substances in electrical
and electronic equipment.
NB2338A-N0_DRUSLL1_ENG.indd 4
2013-05-07
2:52:58
Table of Contents
5
Table of Contents
1
Getting Started
3
Safety Information
6
Unique Features
6
– Auto power down
6
– AUTO POWER On/Off
6
– DRC (Dynamic Range Control)
6Introduction
6
– Symbols Used in this Manual
6Accessories
7
Top panel
7
Rear panel
8
Installing the sound bar
8
– Standing in front of the TV
8
– Mounting the unit on a wall
1
3Operating
11
11
LG Sound Sync
– With wired connection
2
4Troubleshooting
12Troubleshooting
13Specifications
3
5Appendix
14 Trademarks and Licenses
14Maintenance
14 – Handling the Unit
4
2Connecting
10
10
10
Connecting the AC adapter
Connect to your TV
– OPTICAL In connection
NB2338A-N0_DRUSLL1_ENG.indd 5
5
2013-05-07
2:52:58
6
Getting Started
Unique Features
1
Auto power down
Accessories
Please check and identify the supplied accessories.
Getting Started
This unit will be off itself to save electric
consumption in the case main unit is not
connected to external device and is not used for 25
minutes.
So does this unit after six hours since Main unit
has been connected to other device using analog
input.
Power cord (1)
Adapter (1)
Wall Mount Bracket
Installation Template
(1)
Wall mount bracket (1)
Optical cable (1)
Cable ties for arranging
cables(2)
But the unit can turns on automatically based on
the [AUTO POWER] function you've set.
AUTO POWER On/Off
This function is intentionally designed to turn off
the unit after 1 minute of inactivity. This function
automatically turns on/off the unit when you turn
on/off the external device (TV, DVD Player, Bluray Disc Player, etc.) connected to this unit by the
optical cable.
DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned
down (Dolby Digital only).
Introduction
Symbols Used in this Manual
,,Note
Indicates special notes and operating features.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
NB2338A-N0_DRUSLL1_ENG.indd 6
2013-05-07
2:53:00
Getting Started
7
Top panel
1
Getting Started
a1/! (Standby/On)
Switches the unit ON or OFF. Press 1/! to turn
on or off the unit.
b– / + (Volume)
Adjusts speaker volume. Press – / + to adjust the
volume level.
,,Note
When the unit turns on, volume of the unit will
rise gradually to the volume level set at the
unit turned off.
Rear panel
aDC. IN
bS/W Download Connector - Only for service.
cOPT. IN
NB2338A-N0_DRUSLL1_ENG.indd 7
2013-05-07
2:53:01
8
Getting Started
Installing the sound
bar
Mounting the unit on a wall
1
Getting Started
Standing in front of the TV
You can hear the sound by connecting the unit to
the other device : TV, Blu-ray disc player, DVD player,
etc.
Place the unit in front of the TV and connect it to
the device.
You can mount the unit on a wall.
Prepare screws and brackets.
Unit
Wall Mount Bracket
Installation Template
Wall mount bracket
1. Match the TV’s BOTTOM EDGE of Wall Mount
Bracket Installation Template with the bottom
of TV and attach to the position.
TV
NB2338A-N0_DRUSLL1_ENG.indd 8
2013-05-07
2:53:02
Getting Started
2. When you mount it on a wall (concrete), use the
wall plugs (Not supplied). You should drill holes.
A guide sheet (Wall Mount Bracket Installation
Template) is supplied to drill. Use the sheet to
check the point to drill.
9
5. Hang the main unit onto the bracket as shown
below.
1
Getting Started
>>Caution
,,Note
Screws and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting.
3. Remove the Wall Mount Bracket Installation
Template.
4. Fix the brackets with screws (not supplied) as
shown in the illustration below.
yy Do not install this unit upside down. It can
damage the parts of this unit or be the
cause of personal injury.
yy Do not hang onto the installed unit and
avoid any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
,,Note
Detach the unit from the bracket as shown
below.
NB2338A-N0_DRUSLL1_ENG.indd 9
2013-05-07
2:53:04
10
Connecting
Connecting the AC
adapter
Connect to your TV
You can listen to the sound from your TV via the
unit.
OPTICAL In connection
Connect the OPT. IN jack on the back of the unit
to optical out jack on the external device using an
optical cable.
2
Connecting
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC. IN adapter
input.
Optical cable
3. Plug the AC power cord into an AC outlet.
>>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
NB2338A-N0_DRUSLL1_ENG.indd 10
TV
Blu-ray disc player,
DVD player, etc.
2013-05-07
2:53:05
Operating
LG Sound Sync
11
With wired connection
1. Connect your LG TV to the unit by using an
optical digital cable.
You can control some functions of this unit by
your TV's remote control with LG Sound Sync. It
is compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Controllable function by LG TV's remote control :
Volume up/down, mute
Refer to the TV's instruction manual for the details
of LG Sound Sync.
3
TV
Operating
Make one of the following connections, depending
on the capabilities of your equipment.
Optical digital cable
,,Note
yy When the connections failed, make sure of
the condition of the TV and power of it.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turned off the unit.
-- Disconnecting the optical digital audio
cable.
NB2338A-N0_DRUSLL1_ENG.indd 11
2. Set up LG Sound Sync (Optical) on the TV. Refer
to the TV's instruction manual.
3. Turn on the unit.
You can listen to the TV sound if connecting
normally between this unit and your TV.
,,Note
The amount of time to turn off this unit is
different depending on your TV when you set
AUTO POWER function to ON.
2013-05-07
2:53:06
12
Troubleshooting
Troubleshooting
PROBLEM
CORRECTION
Plug in the power cord.
No Power
No sound
The AUTO
POWER
function does
not work.
Check the condition by operating other electronic devices.
Check the OPTICAL IN connection.
Depending on the connected device by the optical cable, this function may not operate.
Check the details below and adjust the unit according to them.
4
When you
sense that
outputted
sound of the
unit is low.
yy With the sound bar connected with TV, change the AUDIO DIGITAL OUT setting on TV
Setup Menu from [PCM] to [AUTO] or [BITSTREAM].
yy With the sound bar connected with Player, change the AUDIO DIGITAL OUT setting on
Player Setup Menu from [PCM] to [PRIMARY PASS-THROUGH] or [BITSTREAM].
yy Change Audio DRC setting on Player setup menu to [OFF] state.
Troubleshooting
NB2338A-N0_DRUSLL1_ENG.indd 12
2013-05-07
2:53:06
Appendix
13
Specifications
General
Power requirements
Refer to main label.
Power consumption
Refer to main label.
Dimensions (W x H x D)
950 mm x 35 mm x 78 mm
Net Weight (Approx.)
1.8 kg
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
5 % to 90 %
Inputs
DIGITAL IN (OPTICAL IN)
3 V (p-p), Optical jack x 1
Amplifier
Stereo mode
30 W + 30 W (4 Ω at 1 kHz)
yy Designs and specifications are subject to change without prior notice.
5
Appendix
NB2338A-N0_DRUSLL1_ENG.indd 13
2013-05-07
2:53:06
14
Appendix
Trademarks and
Licenses
Maintenance
Handling the Unit
When shipping the unit
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
1. No decoding mode indication only dolby
digital signals can be decoded.
2. Missing License Notice on product
Manufctured under license from Dolby
Laboratories.
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
5
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0 Channel is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
Cleaning the unit
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
This product is manufactured under licence
from Sontia Logic Limited and contains software
which is protected under international copyright
laws © Sontia Logic Limited. All rights reserved.
Sontia® and the Sontia wave logo are registered
trademarks of Sontia Logic Limited.
NB2338A-N0_DRUSLL1_ENG.indd 14
2013-05-07
2:53:07
Україна
Name and address of importer:
ПІІ ‘ЛГ Електронікс Україна’, Україна, 01004, м. Київ, вул. Басейна, 4 (літера А),
тел.: +38 (044) 201-43-50, факс: +38 (044) 201-43-73
Российская Федерация
Импортер OOO “ЛГ Электроникс Рус”
Адрес импортера : 143160 Российская Федерация, Московская область, Рузский район, сельское
поселение Дороховское, 86 км. Минского шоссе, д.9
Адрес производителя : ЛГ ЭЛЕКТРОНИКС (ХУЖОУ) ИНК., ЗАВОД ХАТАИ.
ЛГ Электроникс (Хужоу) Инк., завод Хатаи 516006, Китай, пров. ГуанДонг, г. Хужоу, Промышленная зона
Жонгкай, Индустриальный парк Хутаи, ХуФенг Донг Уи Роуд, 13.
Сделано в Китае
Қазақстан Республикасы
Импорттаушы АҚ “ЭЛ Джи Электроникс Алматы Қазақстан”, 050061, Алматы қ., к. Кокорай, 2А
Өндірушінің мекенжайы : 516006, Қытай, ГуанДонг ауданы, Хужоу қаласы, Жонгкай өнеркәсіптік
аймағы, Хутай Индустриялық саябағы, ХуФенг Донг Уи Роуд, 13.
Қазақстан Республикасы территориясында тұтынушылардан келіп түскен талаптар мен
ұсыныстарды қарайтын және тауарды жөндеу мен техникалық қызмет көрсететін ұжым :
АҚ «Эл Джи Электроникс Алматы Казахстан» , 050061, Қазақстан Республикасы, Алматы қ.,
Кокорай, 2А. Басқа сервис орталықтары жайында мағлұматты “Тұтынушыға қызмет көрсету
орталығына” телефон шалу арқылы білуге болады.
Қытайда жасалған
NB2338A-N0_DRUSLL1_ENG.indd 15
2013-05-07
2:53:08
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising