advertisement
▼
Scroll to page 2
of 27
HT752TP_X0.JA3RMLX_ENG_MFL34656541 DVD RECEIVER OWNER’S MANUAL MODEL: XH-T752TP Main Unit - XH-T752TP Speakers - SH72TP-F SH72TP-S SH72TP-C SH72TP-A R USB Before connecting up, operating or repairing this product, please read this instruction booklet carefully and completely. The working life of this product is 7 years since the date of purchase. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. CAUTION concerning the Power Cord CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in a confined space such as a book case or similar unit. CAUTION: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. The openings should be never be blocked by placing the product on a bed, sofa, rug or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer's instruction have been adhered to. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT CLASSE 1 PRODUIT LASER CAUTION: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. The marking of DVD Receiver shall be on the exterior of the bottom of the apparatus. 2 Most appliances recommend they be placed upon a dedicated circuit; That is, a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets, extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs, wall outlets, and the point where the cord exits the appliance. To disconnect power from the mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible. Disposal of your old appliance 1. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. 2. All electrical and electronic products should be disposed of separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. 3. The correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. 4. For more detailed information about disposal of your old appliance, please contact your city office, waste disposal service or the shop where you purchased the product. Introduction Maintenance and Service Before use . . . . . . . . . . . . Front Panel/Rear Panel . . Remote Control . . . . . . . . Maintenance and Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 .4 .5 .6 Refer to the information in this chapter before contacting a service technician. Handling the unit Installation and Setup TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . .7 Power cord Connection . . . . . . . . . . . . . . . . . . .7 Optional Equipment Connection . . . . . . . . . . . .8 Antenna Connection . . . . . . . . . . . . . . . . . . . . .8 Speaker System Connection . . . . . . . . . . . . . . .9 HDMI Connection . . . . . . . . . . . . . . . . . . . . . .10 Displaying Disc Information on-screen . . . . . .11 Initial Settings . . . . . . . . . . . . . . . . . . . . . . . . .11 General Operation . . . . . . . . . . . . . . . . . . . .11-14 LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . .11 DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . . . . .12 AUDIO . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13 5.1 Speaker Setup . . . . . . . . . . . . . . . . . . . . .13 LOCK (Parental Control) . . . . . . . . . . . . . . . .14 OTHERS . . . . . . . . . . . . . . . . . . . . . . . . . . . .14 When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean Do not use volatile liquids such as insecticide spray near the unit. Do not leave rubber or plastic products in contact with the unit for a long period of time. since they leave marks on the surface. Cleaning the unit Operation General features . . . . . . . . . . . . . . . . . Additional features . . . . . . . . . . . . . . . Controlling the TV . . . . . . . . . . . . . . . . Playing an Audio CD or MP3/WMA file Programmed Playback . . . . . . . . . . . . Viewing a JPEG file . . . . . . . . . . . . . . Playing a DivX Movie file . . . . . . . . . . DVD Audio Discs . . . . . . . . . . . . . . . . . Presetting the Radio Stations . . . . . . . Listening to the Radio . . . . . . . . . . . . . Sleep Timer Setting . . . . . . . . . . . . . . . Dimmer . . . . . . . . . . . . . . . . . . . . . . . . . Mute . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting input source . . . . . . . . . . . . . XTS/XTS pro . . . . . . . . . . . . . . . . . . . . . VIRTUAL sound . . . . . . . . . . . . . . . . . . Sound Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15 .16 .16 .17 .17 .18 .19 .20 .21 .21 .22 .22 .22 .22 .22 .22 .22 Reference To clean the player, use a soft, dry cloth. If the surfaces are extremely dirty, use a soft cloth lightly moistened with a mild detergent solution. Do not use strong solvents such as alcohol, benzine, or thinner, as these might damage the surface of the unit. Maintaining the Unit The DVD/CD Receiver is a high-tech, precision device. If the optical pick-up lens and disc drive parts are dirty or worn, the picture quality could be diminished. Depending on the operating environment, regular inspection and maintenance are recommended after every 1,000 hours of use. For details, please contact your nearest authorized service center. Language Codes . . . . . . . . . . . . . . . . . . . . . . .23 Area Codes . . . . . . . . . . . . . . . . . . . . . . . . . . .23 Troubleshooting . . . . . . . . . . . . . . . . . . . . .24-25 Specifications . . . . . . . . . . . . . . . . . . . . . . . . .26 3 Introduction Before use Types of Playable Discs DVD (8 cm / 12 cm disc) To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. This manual provides information on the operation and maintenance of your DVD/CD Receiver. Should the unit require service, contact an authorized service location. About the Symbol Display “ ” may appear on your TV display during operation and indicates that the function explained in this owner’s manual is not available on that specific DVD video disc. Symbol Used in this Manual Note: Indicates special notes and operating features. Tip: Indicates tips and hints for making the task easier. A section whose title has one of the following symbols is applicable only to the disc represented by the symbol. DVD DVD VCD Video CDs ACD Audio CDs MP3 MP3 files WMA WMA files JPEG JPEG files DivX DivX files Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. Copyright 1992-1997 Dolby Laboratories. All rights reserved. Manufactured under license from Digital Theater Systems, Inc. U.S. Pat. No’s. 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535 and other U.S. and worldwide patents issued and pending. "DTS" and "DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2003 Digital Theater Systems, Inc. All Rights Reserved." 4 Video CD (VCD) (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a DVD±R, DVD±RW, SVCD and CD-R or CD-RW that contains audio titles, MP3, WMA, JPEG or DivX files. Notes: Depending on the conditions of the recording equipment or the CD-R/RW (or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs may not be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heartshaped or octagonal). It may result in malfunctions. Regional Code This unit has a regional code printed on the rear of the unit. This unit can play only DVD discs labelled as the same as the rear of the unit or “ALL”. Notes on Regional Codes Most DVD discs have a globe with one or more numbers in it clearly visible on the cover. This number must match your DVD player’s regional code or the disc cannot play. If you try to play a DVD with a different regional code from your player, the message “Check Regional Code” appears on the TV screen. Precautions in using the touch buttons Use the touch buttons with clean and dry hands. - In a humid environment, wipe out any moisture on the touch buttons before using. Do not press the touch buttons hard to make it work. - If you apply too much strength, it can damage the sensor of the touch buttons. Touch the button that you want to work in order to operate the function correctly. Be careful not to have any conductive material such as metallic object on the touch buttons. It can cause malfunctions. Introduction Front Panel/Rear Panel STANDBY/ON ( ) indicator - Lights red when the standby mode of unit is off. VOLUME STOP (x) MONO/STEREO/ X) PAUSE (X POWER FUNCTION Press and hold this button for about 3 seconds, then press repeatedly to select other function. DISC slot OPEN/CLOSE (Z) DISPLAY Window Power cord connector USB port Connect to a USB port of a memory device (USB memory etc.) AM Loop Antenna connector SYSTEM connector FM Antenna connector HDMI OUT HDMI output providing a high quality interface for digital audio and video. PLAY (B) OPTICAL IN connector VIDEO OUT connector S-VIDEO OUT connector COMPONENT VIDEO OUT terminals Connect to a TV with Y PB PR inputs. AV2 AUDIO INPUT (L/R)/ VIDEO INPUT connector VIDEO OUT SELECTOR switch EURO AV1 (TO TV) connector Connect to a TV with SCART jack. Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 5 Remote Control POWER TUNER Selects the System’s tuner (FM and AM bands). AUX Selects input source. Z) EJECT (Z Inserts or pulls out the disc. TUNER POWER AUX DVD USB PROG./MEMO. USB Plays the multimedia files. EJECT DIMMER AUDIO SOUND S-TITLE CLEAR REPEAT A-B MARKER SEARCH DIMMER Changes brightness of the display window on the front panel during in power-on status. SCAN + SCAN + PLAY PAUSE/STEP SKIP STOP TITLE ZOOM Selects the sound mode. SETUP MENU DISPLAY RETURN ENTER Repeats sequence. CLEAR Removes a track number on the program menu or a mark on the MARKER SEARCH menu. MARKER SEARCH Displays MARKER SEARCH menu. REVERSE/FORWARD SKIP ./> >) (. TITLE MENU Accesses the menu on a DVD disc. Displays the disc’s Title menu, if available. ZOOM SETUP SLEEP Accesses or removes setup menu. VOL DISPLAY MUTE Accesses On-Screen display. RETURN Removes the setup menu. x) STOP (x PLAY (B) X) PAUSE/STEP (X VSM XTS pro Supplies more natural and realistic sound. Supplies great sound effect. b/B/v/V (left/right/up/down) Selects an option in the menu. ENTER SLEEP HDMI RESOLUTION PRESET (-/+) Selects programme of Radio. Sets the System to turn off automatically at a specified time. MUTE VOLUME (-/+) TUN. (-/+) Tunes in the desired radio station. Selects a service, programme number directly or selects numbered options in a menu. S-TITLE Searches backward or forward. Reverse/ Forward slow playback. REPEAT A-B 0-9 numerical buttons Accesses or removes Program menu. Enter a radio station’s frequency into the tuner. SCAN/SLOW(bb/BB) Repeats chapter, track, title, all Acknowledges the menu selection. PROG./MEMO. Marks a point during playback. SOUND REPEAT Selects the output source (CD/DVD). Selects a subtitle language (DVD). REPEAT AUDIO Selects an audio language (DVD) or an audio channel (CD). DVD Adjusts speaker volume. RESOLUTION POWER PR INPUT HDMI Switches the HDMI mode to HDMI (active) and OFF (inactive). Remote Control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor Angle: About 30° in each direction in front of the remote sensor VOL Changes the resolution depending on your TV. TV Controls the TV. (LG TV only) (See page16) Remote control battery installation Remove the battery cover on the rear of the remote control, and insert two R06 (size AA) batteries with and aligned correctly. Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 6 Installation and Setup TV Connection SCART connection Make one of the following connections, depending on the capabilities of your existing equipment. Connect the EURO AV1 (TO TV) connector on the DVD/CD Receiver to the corresponding jacks on the TV using the scart cable (T). Rear of DVD/CD Receiver If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/CD Receiver’s progressive scan output for higher video resolution. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owner’s manual for TV then set the resolution that your TV can accept. Notes: The HDMI mode must be set to OFF for VIDEO OUT and S-VIDEO OUT and Component video connections. A picture via scart input is not supported. Installation and Setup Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution: Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. Caution VIDEO OUT SELECTOR switch In power-off state, select either COMPONENT VIDEO OUT (PROGRESSIVE SCAN) or SCART signal of EURO AV1 (TO TV) terminal depending on how to connect the unit to the TV. Power cord Connection T SCART INPUT C COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y Pb S S-VIDEO INPUT V Connect the power cord connector on the DVD/CD Receiver to the outlet using the power cord cable (P). Connect the power cord cable (W) of the active subwoofer to the outlet. VIDEO INPUT Pr L Active subwoofer Rear of TV S-Video connection Connect the S-VIDEO OUT jack on the DVD/CD Receiver to the S-VIDEO IN jack on the TV using the S-Video cable (S). Bottom of the Active subwoofer Outlet Video connection Connect the VIDEO OUT jack from the DVD/CD Receiver to the VIDEO IN jack on the TV using the video cable supplied (V). Component Video (Color Stream ) connection ® W P Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding jacks on the TV using an Y PB PR cable (C). 7 Optional Equipment Connection USB connection Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the rear of the unit. USB Memory, MP3 Player (or Memory Card Reader, etc.) Supplied AV2 AUDIO INPUT (L/R)/ VIDEO INPUT connection (A) Connect a OUTPUT of auxiliary device to the AV2 AUDIO INPUT (L/R)/ VIDEO INPUT connector. OPTICAL IN connection (O) Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector. Auxiliary device Not supplied IN VIDEO OUT To AUDIO OUT (L/R)/VIDEO OUT DVD Player (or Digital Device, etc) AUDIO (L) AUDIO (R) OPTICAL OUT A To AV2 IN AUDIO (L/R)/ VIDEO O Rear of DVD/CD Receiver Removing the USB Device from the unit 1. Choose a different function mode or press STOP (x) twice in a row. 2. Remove the USB device from the unit. Notes: Don’t extract the USB device while operating. Music files (MP3/WMA), image files (JPEG) and DivX files can be played. This unit can not use a USB HUB. Recommended Memory Cards. Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multi Media Card (MMC), Memory Stick Pro (MS-Pro) - Compatible with : FAT16, FAT32 - Only use the memory cards recommended. Devices which require additional program installation when you have connected the unit to a computer are not supported. In case of a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. Up to four primary partitions of a drive are supported. If there is an extension partition, it will not be supported. If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the initial menu after you select a folder, press RETURN. Digital cameras and mobile phones are not supported. 8 Antenna Connection Connect the supplied FM/AM antenna for listening to the radio. Connect the AM Loop antenna to the AM antenna connector. Connect the FM Wire antenna to the FM antenna connector. AM Loop Antenna (supplied) FM Wire Antenna (supplied) Notes: To prevent noise pickup, keep the AM Loop antenna away from the DVD/CD Receiver and other components. Be sure to fully extend the FM wire antenna. After connecting the FM Wire antenna, keep it as horizontal as possible. Speaker System Connection 1. Connect the SYSTEM connector on the DVD/CD Receiver to the SYSTEM connector on the active subwoofer with the supplied system cable (S). If you don’t connect rightly the system cable, the “CHECK CABLE” appears in the display window. 2. Connect speaker connector on the DVD/CD Receiver to the speaker connector on the bottom of active subwoofer with the supplied speaker cables. Front speaker (Right) Front speaker (Left) Installation and Setup Center speaker Rear speaker (Left surround) Rear speaker (Right surround) Active subwooifer Bottom of subwoofer S Tighten both screws on the connector. Notes: To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Be sure to match the speaker cable to the appropriate terminal on the components: + to + and – to –. If the cables are reversed, the sound will be distorted and will lack base. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. 9 HDMI Connection About HDMI HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for an easy all- digital output to an HDMI or DI-equipped TV. Connection to an HDMI TV requires an HDMI cable while connection to a DVI-equipped TV requires a DVI adapter besides a HDMI cable. HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video, a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connector), and communication between the AV source and AV devices such as DTVs. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI licensing LLC. If you have a HDMI TV or monitor, you can connect it to this DVD/CD Receiver using a HDMI cable. 1. Connect the HDMI OUT jack on the DVD/CD Receiver to the HDMI jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to owner’s manual for TV). 3. In the stop mode, select HDMI mode by pressing HDMI. Press RESOL. repeatedly to select the resolution you wish to change. Notes: The arrow on the cable connector body should face up for correct alignment with the connector on the DVD/CD Receiver. If HDMI cable is not connected, the HDMI button does not operate. If there is noise or there are lines on the screen, please check the HDMI cable. Not all HDCP-compatible DVI devices will work with this DVD/CD Receiver. If TV does not support HDCP, snow noise appears on the screen, or picture may be vibrated. Tip : When you use HDMI connection, you can change the resolution (480p or 576p, 720p, 1080i) for the HDMI output by pressing RESOLUTION on the Remote Control. HDMI compatible TV H (Not supplied) HDMI Resolution setting You can change the resolution for the COMPONENT VIDEO OUT by pressing RESOLUTION on the Remote Control. Available resolution settings are as shown below. OUTPUT CONNECTION HDMI VIDEO OUT Available PAL 1920 x 1080i 1280 x 720p 720 x 576p COMPONENT 1920 x 1080i VIDEO OUT 1280 x 720p 720 x 576p 720 x 576i MONITOR OUT 720 x 576i S-VIDEO 720 x 576i SCART 720 x 576i Resolution NTSC 1920 x 1080i 1280 x 720p 720 x 480p 1920 x 1080i 1280 x 720p 720 x 480p 720 x 480i 720 x 480i 720 x 480i - Notes: If the picture does not appear on the screen with the analog video connections, change the resolution to 480i (or 576i). For 720p and 1080i resolution on the component video out, only non-copy protected discs can be played back. If the disc is copy protected, it will be displayed at the 576p(PAL) 480p(NTSC) resolution. 1080i, 720p, 576p and 480p does not work with the analog video connections (MONITOR OUT & S-VIDEO OUT). The component (Y/PB /PR) will output to black picture in the RGB mode. If you change the resolution, the display MENU (MP3/JPEG/DivX) size is changed. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owner’s manual for TV, and then set the resolution that your TV can accept. Caution: Changing the resolution when the DVD/CD Receiver is connected with HDMI connector may result in malfunctions. To solve the problem, turn off the DVD/CD Receiver and then turn it on again. 10 Displaying Disc Information On - screen GENERAL OPERATION You can display various information about the disc loaded on-screen. 2. Use v / V to select the desired option then press B to move to the second level. The screen shows the current setting for the selected item, as well as alternate setting(s). 2. You can select an item by pressing v / V and change or select the setting by pressing b / B. Title (Track) – Current title (or track) number/ total number of titles (or tracks). Chapter – Current chapter number/ total number of chapters. Time – Elapsed playing time. Audio – Selected audio language or channel. Subtitle – Selected subtitle. Angle – Selected angle/ total number of angles. Sound – Selected sound mode. 3. Use v / V to select the second desired option and then press B to move to the third level. 4. Use v / V to select the desired setting then press ENTER to confirm your selection. Some items require additional steps. 5. Press SETUP or PLAY to exit the Setup menu. LANGUAGE LANGUAGE Note: If any button is not pressed for a few seconds, the onscreen display disappears. OSD English Disc Audio Original Disc Subtitle Off Disc Menu Original Move Initial Settings By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 11 to 14. To display and exit the Menu: Press SETUP to display the menu. A second press of SETUP will take you back to initial screen. To go to the next level: Press B on the remote control. To go back to the previous level: Press b on the remote control. Installation and Setup 1. Press DISPLAY to show various playback information. The displayed items differ depending on the disc type or playing status. 1. Press SETUP. The Setup menu appears. Select OSD Select a language for the Setup menu and then onscreen display. Disc Audio / Subtitle / Menu Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. Original – Refers to the original language in which the disc was recorded. Other – To select another language, press numeric buttons and then ENTER to enter the corresponding 4-digit number according to the language code list on the page 23. If you enter the wrong language code, press CLEAR. 11 DISPLAY DISPLAY TV Aspect 16 : 9 Display Mode Widescreen Progressive Scan Off Move Select TV Aspect 4:3 – Select when a standard 4:3 TV is connected. 16:9 – Select when a 16:9 wide TV is connected. Display Mode The display Mode setting works only when the TV Aspect mode is set to “4:3”. Letterbox – Displays a wide picture with bands on the upper and lower portions of the screen. Panscan – Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit. 12 AUDIO 5.1 Speaker Setup Each DVD disc has a variety of audio output options. Set the receiver’s AUDIO options according to the type of audio system you use. AUDIO Select DRC On Vocal On HD AV Sync 0 ms 1. Press ENTER, and the 5.1 Speaker Setup menu appears. AUDIO Speaker Size Small Volume 0 dB Distance 0 m Test Move Front L Off Select Select Dynamic Range Control (DRC) With the DVD*1 format, you can hear a program’s soundtrack in the most accurate and realistic presentation, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. *1: Dolby Digital only Vocal Set Vocal to On only when a multi-channel karaoke DVD is playing. The karaoke channels on the disc will mix into normal stereo sound. HD AV Sync When using Digital TV. Sometimes AV signal could not be transmitted simultaneously because of later transmission of video signal compared to audio signal. Because it takes some time to convert analog video signal to digital one in the Digital TV. And It means that you may not enjoy picture on the screen and sound from speaker at the same time even though it is one scene. In the HD AV Sync menu, you could adjust delay time to audio signal for simultaneous AV signal transmission Delay time could be set up with 10 msec unit. (0 ~ 300 msec) Delay time is different according to each TV Brand. So you need to adjust optimal delay time complying with your TV. Move Return Enter 2. Use b / B to select the desired speaker. 3. Adjust options using v / V / b / B buttons. Installation and Setup 5.1 Speaker Setup Make the following settings for the built-in 5.1 channel surround decoder. 4. Press ENTER to confirm your selection. Returns to the previous menu. Speaker selection Select a speaker that you want to adjust. [Front speaker (Front L), Front speaker (Front R), Center Speaker (Center), Subwoofer (SubWoofer), Rear speaker (Rear L), Rear speaker (Rear R)] Note: Certain speaker settings are prohibited by the Dolby Digital licensing agreement. Size Since the speaker settings are fixed, you cannot change the settings. Volume Press b / B to adjust the output level of the selected speaker. (-5dB ~ 5dB) Distance If you connected speakers to your DVD/CD Receiver, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. Press b / B to adjust the Distance of the selected speaker. (You can’t adjust front / Woofer speakers) Test Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system. Front Left (Front L) → Center → Front Right (Front R) → Rear Right (Rear R) → Rear Left (Rear L) → SubWoofer 13 Area Code LOCK (Parental Control) Enter the code of the area whose standards were used to rate the DVD video disc, based on the list on page 23. LOCK Rating Unlock Password **** Area Code RU US 1. Select “Area Code” on the LOCK menu then press B. 2. Follow the step 2 as shown previous paragraph (Rating). Move Select Rating 3. Select the first character using v / V buttons. Blocks playback of rated DVDs based on their contents. Not all discs are rated. 4. Press B and select the second character using v / V buttons. 1. Select “Rating” on the LOCK menu then press B. 5. Press ENTER to confirm your Area code selection. 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. OTHERS OTHERS Input a password and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. PBC On DivX(R) Registration Select 3. Select a rating from 1 to 8 using the v / V buttons. Rating 1-8: Rating one (1) has the most restrictions and rating eight (8) is the least restrictive. Unlock: If you select unlock, parental control is not active and the disc plays in full. 4. Press ENTER to confirm your rating selection, then press SETUP to exit the menu. Password You can enter or change password. 1. Select Password on the LOCK menu and then press B. 2. Follow the step 2 as shown above (Rating). To change the password, press ENTER when the “Change” option is highlighted. Input a password and press ENTER. Enter it again and press ENTER to verify. Select PBC Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played in the same way as Audio CDs. DivX(R) Registration We provide you the DivX® VOD (Video On Demand) registration code that allows you to rent and purchase videos based on the DivX® VOD service. For more information, visit www.divx.com/vod. If you forget your password, you can clear it using the following steps: 1. Select “DivX(R) Registration” option and then press B. 2. Press ENTER while “Select” is selected and the registration code will appear. Use the registration code to purchase or rent the video’s from DivX® VOD service at www.divx.com/vod. Follow the instructions and download the video onto a disc for playback on this unit. 1. Press SETUP to display the Setup menu. 3. Press ENTER to exit. 3. Press SETUP to exit the menu. If you forget your password 2. Input the 6-digit number “210499” and press ENTER. The password is cleared. 14 Move Note: All the downloaded video’s from DivX® VOD can only be played back on this unit. Operation General features Buttons Operations EJECT Pulls out the disc. X (PAUSE) During playback, press X to pause playback. ALL Press X repeatedly to play Frame-by-Frame. DVD During playback, press SKIP (. or >) to go to the next chapter/track or to return to the beginning of the current chapter/track. ALL SKIP (. / >) Discs ALL VCD DivX Press SKIP . twice briefly to step back to the previous chapter/track. SCAN (m / M) During playback, press SCAN (m or M) repeatedly to DVD select the required scan speed. ACD DVD : bb, bbb, bbbb, bbbbb, bbbbbb or BB, BBB, BBBB, BBBBB, BBBBBB DivX disc, Video CD : bb, bbb, bbbb, bbbbb or BB, BBB, BBBB, BBBBB WMA/MP3, Audio CD : m (X2, X4, X8) or M (X2, X4, X8) VCD DivX MP3 WMA During playback, press REPEAT repeatedly to select a desired repeat mode. DVD Video discs: Chapter/Title/Off Video CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off ALL REPEAT A-B During playback, press REPEAT A-B to select a point A and a point B and repeats a sequence from point A (Starting point) to point B (End point). Press REPEAT A-B to exit. DVD VCD ZOOM During playback or in the pause mode, press ZOOM to enlarge the video image (3 steps). You can move through the zoomed picture using b B v V buttons. DVD VCD TITLE If the current DVD title has a menu, the title menu appears on the screen. Otherwise, the disc menu may appears. DVD MENU The disc menu appears on the screen. DVD During playback, press S-TITLE repeatedly to select a desired subtitle language. DVD DivX (AUDIO language) During playback, press AUDIO repeatedly to hear a different audio language or audio track. DVD DivX (AUDIO channel) Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT). VCD In the pause mode, press SCAN (m or M) to select the required speed. DVD : t (1/2, 1/4, 1/8, 1/16) or T (1/2, 1/4, 1/8, 1/16) Video CD : T (1/2, 1/4, 1/8, 1/16) DVD (SUBTITLE) SLOW Operation REPEAT VCD 15 Notes on general features: Screen Saver Zoom may not work on some DVDs. The A-B repeat function is available only in the current title. Additional features 1.5 times speed playback DVD VCD ACD MP3 WMA You can play at 1.5 times speed The 1.5 speed allows you to watch the pictures and listen to the sound quicker than playing at a normal speed on the disc. 1. During playback, press PLAY(B) to play at 1.5 times speed. “BX1.5” appears on the screen. DVD VCD Last Scene Memory DivX To start playing at any chosen time on the disc: 1. Press DISPLAY during playback. 2. Press v / V to select the time clock icon and “--:--:--” appears. 3. Input the required start time in hours, minutes, and seconds from left to right. If you enter the wrong numbers, press CLEAR to remove the numbers you entered. Then input the correct numbers. Note: This receiver does not memorize the scene of a disc if you switch off the receiver before commencing to play the disc. You must select an appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold X on the front panel or PAUSE/STEP (X) remote control for more than 5 seconds to be able to select a system (PAL, NTSC). When the selected system is not compatible with the system of your TV, normal colour picture may not be displayed. NTSC: Select when DVD/CD Receiver is connected with NTSC-TV. PAL: 4. Press ENTER to confirm. Playback starts from the selected time. Marker Search DVD VCD DivX To enter a Marker You can start playback from up to nine memorized points. To enter a marker, press MARKER at the desired point on the disc. The Marker icon appears on the TV screen briefly. Repeat to enter up to nine markers. To Recall or Clear a Marked Scene Select when DVD/CD Receiver is connected with PAL-TV. Controlling the TV Your remote control is capable of operating your DVD/CD Receiver as well as limited functions of LG TV. Follow the instructions below to operate your LG TV. Setting Remote Control Codes for LG TV 1. Hold POWER (TV) and press PR (-/+) button repeatedly until the TV on or off. 1. During disc playback, press SEARCH. The marker search menu appears on the screen. 2. The POWER (TV), PR (-/+), VOLUME (-/+), and INPUT buttons on remote control are used to operate the LG TV. 2. Within 10 seconds, press b / B to select a marker number that you want to recall or clear. Note: 3. Press ENTER and playback starts from the marked scene. Or press CLEAR and the marker number is erased from the list. 4. You can play any marker by inputting its number on the marker search menu. 16 DVD This receiver memorizes the last scene from the last disc that is viewed. The last scene remains in the memory even if you remove the disc from the receiver or switch off the receiver. If you load a disc that has the scene memorized, the scene is automatically recalled. System Select 2. Press PLAY(B) again to exit. Time Search The screen saver appears when you leave the unit in Stop mode for about five minutes. If the remote control does not operate your particular TV, try the other code or use the remote control originally supplied with the LG TV. (LG and Gold Star) Due to the variety of codes used by manufacturers, OUR COMPANY cannot guarantee that the remote control will operate every LG TV model. Playing an Audio CD or MP3/WMA file Programmed Playback This unit can play Audio CDs or MP3/WMA files. The program function enables you to store your favorite tracks from any disc in the receiver memory. A program can contain 300 tracks. ID3 TAG When playing a file containing information such as track titles, you can see the information by pressing DISPLAY. (Song, Artist, Album, Genre, Comment) Tips: Press MENU to move to the next page. On a CD with MP3/WMA and JPEG, you can switch MP3/WMA and JPEG. Press TITLE, and MUSIC or PHOTO word on top of the menu is highlighted. MP3 / WMA disc compatibility with this player is limited as follows: • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) • The DVD/CD Receiver cannot read an MP3/WMA file that has a file extension other than “.mp3” / “.wma”. • CD-R physical format should be ISO 9660 • If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is impossible to playback MP3 / WMA files.We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. • File names should have a maximum of 8 letters and must incorporate an .mp3 or .wma extension. • They should not contain special letters such as / ? * : “ < > l etc. • The total number of files on the disc should be less than 999. This DVD/CD Receiver requires discs and recordings to meet certain technical standards in order to achieve optimal playback quality. Pre-recorded DVDs are automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that permission is required in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. 1. Insert a disc. Audio CD and MP3/WMA Discs: 2. Select a track on the “List” and then press PROG. or select “ (Add)” icon and then press ENTER to place the selected track on the “Program” list. Repeat to place additional tracks on the list. Note: You can add all tracks in the disc. Select “ then press ENTER. (Add All)” icon 3. Select the track you want to start playing on the “Program” list. Press MENU to move to the next page. 4. Press PLAY or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the “Program” list have played once. 5. To resume normal playback from programmed playback, select a track of AUDIO CD (or MP3/WMA) list and then press PLAY. Repeat Programmed Tracks 1. Press REPEAT when playing a disc. The repeat icon appears. 2. Press REPEAT to select a desired repeat mode. • TRACK: repeats the current track • ALL: repeats all the tracks on programmed list. • Off(No display): does not play repeatedly. Operation MP3/ WMA/ Audio CD Once you insert an MP3/WMA files recording media or Audio CD, a menu appears on the TV screen. Press v / V to select a track/file and then press PLAY or ENTER, and playback starts. You can use variable playback functions. Refer to the page 15. Erasing a Track from “Program” List 1. Use v V to select the track that you wish to erase from the Program list. 2. Press CLEAR. Alternatively, select “ (Delete)” icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks on the list. Erasing the Complete Program List Use v / V to select “ ENTER. (Del all)” and then press Note: The programs are also cleared when the disc is removed. 17 Viewing a JPEG file JPEG This unit can play discs with JPEG files. Before playing JPEG recordings, read the notes on JPEG Recordings on the right. 1. Insert a disc. The PHOTO menu appears on the TV screen. PHOTO List Preview JPEG Folder 1 JPEG disc compatibility with this player is limited as follows: • Depending upon the size and the number of JPEG files, it could take a long time for the DVD/CD Receiver to read the disc’s contents. If you don’t see an on-screen display after several minutes, some of the files may be too large — reduce the resolution of the JPEG files to less than 2M pixels as 2760 x 2048 pixels and burn another disc. JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 • The total number of files and folders on the disc should be less than 999. JPEG Folder 8 • Some discs may not operate due to a different recording format or the condition of disc. 2. Press v / V to select a folder and then press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, use the v / V buttons on the remote to highlight and press ENTER. • Ensure that all the selected files have the “.jpg” extensions when copying into the CD layout. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. While viewing a file, you can press STOP to move to the previous menu (JPEG menu). • File names without “.jpg” extension will not be able to be read by this DVD/CD Receiver. Even though the files are shown as JPEG image files in Windows Explorer. Note: When viewing a JPEG file, the resolution is changed 576p or 480p if the resolution set to 1080i. You can change the resolution for 720p, 576p, or 480p. Tips: There are four Slide Speed options : > (Slow), >> (Normal), >>> (Fast) and II (off). Use v /V /b /B to highlight the Speed. Then, use b / B to select the option you want to use and then press ENTER. If you set Speed option to Off, the slide is not active. Slide Show Use v V b B to highlight the (Slide Show) then press ENTER.(You can not change resolution) Still Picture 1. Press PAUSE/STEP during the slide show. The DVD/CD Receiver will now go into the PAUSE mode. 2. To return to the slide show, press PLAY or press PAUSE/STEP again. Moving to another File Press SKIP (. or >) once during viewing a picture to advance to the next or previous file. Rotating the picture Press v V b B during showing a picture to rotate the picture clockwise or counter-clockwise. 18 • If the files have “.jpe” or “.jpeg” extensions, please rename them as “.jpg” file. Playing a DivX Movie file Using this DVD/CD Receiver you can play DivX disc. DivX disc compatibility with this player is limited as follows: 1. Insert a disc. The MOVIE menu appears on the TV screen. • Available resolution size of the DivX file is under 800x600 (W x H) pixel. MOVIE 0:00:00 • The file name of the DivX subtitle is available by 45 characters. List Movie Folder 1 Movie Folder 2 Movie Folder 3 Movie Folder 4 Movie Folder 5 Movie Folder 6 • If there is impossible code to express in the DivX file, it may be displayed as " _ " mark on the display. Movie Folder 7 2. Press v / V to select a folder and then press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the v / V buttons on the remote to highlight and press ENTER. 3. If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. 4. Press STOP to exit. Notice for displaying the Divx subtitle If the subtitle does not display properly during playback, press and hold S-TITLE for about 3 seconds then press S-TITLE to select another language code until the subtitle is displayed properly Tips: Press MENU to move to the next page. On a CD with MP3/WMA, JPEG and MOVIE file, you can switch MUSIC, PHOTO and MOVIE menu. Press TITLE, and MUSIC, PHOTO and MOVIE word on top of the menu is highlighted. Notes: Be sure to select “SUBTITLE ON” mode by pressing the subtitle file every time before playing a DivX file . • If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. • If the video and audio structure of recorded files are not interleaved, either video or audio is outputted. Playable DivX file • ".avi ", ".mpg ", ".mpeg ", ".divx" Playable Subtitle format • SubRip(*.srt/*.txt) SAMI(*.smi) SubStation Alpha(*.ssa/*.txt) MicroDVD(*.sub/*.txt) SubViewer 2.0(*.sub/*.txt) VobSub(*.sub) Playable Codec format • "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "MP43 ", "3IVX ". Operation Movie Folder 8 Playable Audio format "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". • Sampling frequency: within 32 - 48 kHz (MP3), within 24 - 48kHz (WMA) • Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA) When the subtile has more than two languages in the file, original subtile is only available. The DivX files in your memory card can not be played. You can not adjust sound mode and VIRTUAL sound during the DivX file playing. 19 DVD Audio Discs DVD Audio is a new disc format building on the success of DVD to provide high quality, uncompressed, multi-channel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. DVD Audio can provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD). A typical DVD Audio disc contains up to seven times the data capacity of a CD. This additional space is used for music, either Advanced Resolution multichannel sound quality that is closer to the artist’s master recording or for longer recordings. Many DVD Audio discs contain on-screen text, such as artist biographies, playlist, or lyrics. Some DVD Audio discs contain photo galleries or video clips. Moving to another GROUP Some DVD Audio discs divide contents into different groups. Your player enables you to quickly access different groups during playback via the on-screen display. 1. Press DISPLAY during playback in the stop mode. 2. Press v/V to select Group icon. 3. Press b/B or the numeric buttons (0-9) to select a group number. Note: Sometimes the author of the disc creates hidden content that can only be accessed by entering a password. If the lock icon appears on the TV screen, enter the password (sometimes you’ll find it on the disc’s jacket cover or on a web site). This password control isn’t dictated by your DVD/CD Receiver — it is a function of the disc. Since the authorizing of DVD Audio Discs varies, some of the on-screen display choices might not be available for the disc you’re playing. Viewing another PAGE Since DVD Audio discs can hold a lot of content, there are various ways to see what’s available on the disc. 1. Press DISPLAY during playback. 2. Press v/V to select Page icon. 3. Press b/B to select a page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the authorizing of DVD Audio Discs varies, some of the on-screen display choices might not be available for the disc you’re playing. 20 Presetting the Radio Stations Listening to the Radio You can preset 50 stations for FM and AM (MW). Before tuning, make sure that you have turned down the volume. Preset radio stations in the DVD/CD Receiver’s memory first (see “Presetting radio stations” on the left). 1. Press TUNER on the remote control until FM or AM (MW) appears in the display window. 1. Press TUNER until FM or AM (MW) appears in the display window. 3. Press and hold TUN. (-/+) for about two seconds until the frequency indication starts to change, then release. Scanning stops when the DVD/CD Receiver tunes in a station. 4. Press PROG./MEMO. on the remote control. A preset number will flash in the display window. 5. Press PRESET (-/+) on the remote control to select the preset number you want. 6. Press PROG./MEMO. on the remote control again. The station is stored. The last received station is tuned in. 2. Press PRESET (-/+) repeatedly on the remote control to select the preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. 3. Adjust the volume by pressing VOLUME on the front panel or VOLUME +/- on the remote control repeatedly. To turn off the radio Press POWER to turn the DVD/CD Receiver off or select another function mode (DVD/CD, AUX, USB). To listen to non-preset radio stations Use manual or automatic tuning in the step 2. 7. Repeat steps 3 to 6 to store other stations. For manual tuning, press TUN. (-/+) repeatedly. To tune in a station with a weak signal For automatic tuning, press and hold TUN. (-/+) for about two seconds on the front panel. Press TUN. (-/+) repeatedly in step 3 to tune in the station manually. To clear all the stored stations Press and hold PROG./MEMO. for about two seconds and “ERASE ALL” is appeared in the display window and then press PROG./MEMO. again, the stations are cleared. If you have accidentally entered into the "ERASE ALL" mode and you do not wish to clear the memory, do not press any key. After a few seconds, "ERASE ALL" will go off by itself and change to normal mode. Note: If all stations have already been entered, the FULL message will appear in the display window for a moment and then a preset number will flash. To change the preset number, follow the steps 5-6 as above. To select a preset radio station directly You can use the number buttons on the remote control to select a preset radio station directly. For example, to listen to the preset station 4, press 4 on the remote control. To listen to the preset station 19, press 1 and then 9 (within 3 seconds). For your reference If an FM program is noisy Press X on the front panel to make “STEREO” disappear in the display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo effect. Operation 2. And then every time you press TUNER, FM and AM (MW) changes alternately. To improve reception Reorient the supplied antennas. 21 Sleep Timer Setting XTS/XTS pro You can set the DVD/CD Receiver to turn off automatically at a specified time. Each time you press XTS pro the setting changes in the following order. 1. Press SLEEP to set the desired sleep time. The SLEEP indicator and the sleep time appears in the display window. 2. Each time you press SLEEP the setting changes in the following order. SLEEP 180 →150 →120→90 →80 → 70 → 60→ 50 → 40 → 30 → 20 →10 →OFF (No display) Note: You can check the remaining time before the DVD/CD Receiver turns off. Press SLEEP. The remaining time appears in the display window. Dimmer This function will change the brightness of the display window and the function buttons on the front panel in power-on state. Press the DIMMER repeatedly. Mute Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, the “MUTE” indicator flashes in the display window. Selecting input source You can use VCR or other units connected to the AV IN, EURO AV1 (TO TV) connector or Optical connector. Refer to the Owner’s Manual supplied with the unit for further information on the operation. Press AUX repeatedly on the remote control to select the desired input source. Each time you press this button, the mode of the function changes in the following sequence: AUX : for selecting the analog signal from AV2 AUDIO INPUT (L/R)/ VIDEO INPUT connector. AUX OPT: for selecting the optical digital signal from AV2 VIDEO INPUT & OPTICAL IN connector. TV-AUDIO: for selecting the TV audio signal from SCART. Note The Optical input function is available only when the sampling frequency of other unit is 32 - 96kHz. You can also select the input source by pressing PLAY (B) button on the front panel. Press and hold this button for about 3 seconds, then press repeatedly to select other function. XTS ON → NORMAL → XTS-P ON... XTS-P ON The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. XTS ON When playing the movie with the weak bass sound relatively to the general music, it enforces the sense of sound at woofer for you to satisfy with. In the mode of 2 CH BYPASS, It creates the high display effect by playing the sound source via the rear speakers same as the front speakers. Note The XTS mode is temporarily disabled when changing from 2.1 CH to 5.1 CH and it is enabled when changing it to 2.1 CH. NORMAL XTS-P and XTS mode tune off VIRTUAL sound Press VSM to set the VIRTUAL sound. Source 2.1 ch. 5.1 ch Display VIRTUAL VIRTUAL 3D STEREO Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. Multichannel sound The Multichannel sound changes the sound in 5.1 ch into a virtual one in the 10.1 ch so that it provides such a feeling that you listen to the sound simultaneously from the right and left speakers and center speaker. Sound Mode You can enjoy surround sound simply by selecting one of the pre-programmed sound fields according to the program you want to listen to. (2 ch. sound only) Press SOUND button repeatedly. BYPASS → ON STAGE → STUDIO → CLUB → HALL → THEATER 1 → CHURCH → PL ll MOVIE → PL ll MUSIC → PL ll MTRX → BYPASS... Note: Initial sound mode is BYPASS. 22 Effect 3D STEREO Multichannel sound Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu. Language Abkhazian Afar Afrikaans Albanian Ameharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali; Bangla Bhutani Bihari Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Code 6566 6565 6570 8381 6577 6582 7289 6583 6588 6590 6665 6985 6678 6890 6672 6682 6671 7789 6669 7577 6765 9072 6779 7282 6783 6865 7876 6978 6979 6984 7079 Language Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Hungarian Icelandic Indonesian Interlingua Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kirghiz Korean Kurdish Laothian Latin Latvian, Lettish Code 7074 7073 7082 7089 7176 7565 6869 6976 7576 7178 7185 7265 7387 7273 7285 7383 7378 7365 7165 7384 7465 7487 7578 7583 7575 7589 7579 7585 7679 7665 7686 Language Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Oriya Panjabi Pashto, Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Rumanian Russian Samoan Sanskrit Scots Gaelic Serbian Serbo-Croatian Shona Sindhi Code 7678 7684 7775 7771 7783 7776 7784 7773 7782 7779 7778 7865 7869 7879 7982 8065 8083 7065 8076 8084 8185 8277 8279 8285 8377 8365 7168 8382 8372 8378 8368 Area Malaysia Maldives Mexico Monaco Mongolia Morocco Nepal Netherlands Netherlands Antilles New Zealand Nigeria Norway Oman Pakistan Panama Paraguay Philippines Poland Portugal Romania Russian Federation Code MY MV MX MC MN MA NP NL AN NZ NG NO OM PK PA PY PH PL PT RO RU Language Singhalese Slovak Slovenian Somali Spanish Sudanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapük Welsh Wolof Xhosa Yiddish Yoruba Zulu Code 8373 8375 8376 8379 6983 8385 8387 8386 8476 8471 8465 8484 8469 8472 6679 8473 8479 8482 8475 8487 8575 8582 8590 8673 8679 6789 8779 8872 7473 8979 9085 Area Codes Choose a area code from this list. Code AF AR AU AT BE BT BO BR KH CA CL CN CO CG CR HR CZ DK EC EG SV Area Ethiopia Fiji Finland France Germany Great Britain Greece Greenland Code ET FJ FI FR DE GB GR GL Heard and McDonald Islands HM Hong Kong HK Hungary HU India IN Indonesia ID Israel IL Italy IT Jamaica JM Japan JP Kenya KE Kuwait KW Libya LY Luxembourg LU Area Saudi Arabia Senegal Singapore Slovak Republic Slovenia South Africa South Korea Spain Sri Lanka Sweden Switzerland Taiwan Thailand Turkey Uganda Ukraine United States Uruguay Uzbekistan Vietnam Zimbabwe Code SA SN SG SK SI ZA KR ES LK SE CH TW TH TR UG UA US UY UZ VN ZW Reference Area Afghanistan Argentina Australia Austria Belgium Bhutan Bolivia Brazil Cambodia Canada Chile China Colombia Congo Costa Rica Croatia Czech Republic Denmark Ecuador Egypt El Salvador 23 Troubleshooting Check the following guide for the possible cause of a problem before contacting service. Symptom Cause No power. • The power cord is disconnected. The power is on, but the DVD/CD Receiver does not work. • No disc is inserted. • Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is lit.) No picture. • The TV is not set to receive DVD signal output. • Select the appropriate video input mode on the TV so the picture from the DVD/CD Receiver appears on the TV screen. • Connect the video cable into the jacks securely. • The video cable is not connected securely. • The connected TV power is turned off. There is no sound or only a very low-level sound is heard. The playback picture is poor. Loud hum or noise is heard. • Turn on the TV. • The equipment connected with the audio cable is not set to receive DVD signal output. • Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver. • The audio cables are not connected securely. • Connect the audio cable into the jacks securely. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. • The audio connecting cable is damaged. • Replace it with new one. • The disc is dirty. • Clean the disc. The DVD/CD Receiver • No disc is inserted. does not start playback. 24 Correction • Plug the power cord securely into the wall outlet. • Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is lit.) • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type, colour system and Regional code.) • The disc is placed upside down. • Place the disc with the playback side down. • The disc is not placed within the guide. • Insert the disc on the disc slot correctly. • The disc is dirty. • Clean the disc. • A menu is on the TV screen. • Press the SETUP button to turn off the menu screen. • The Rating level is set. • Cancel the Rating function or change the rating level. • The disc is dirty. • Clean the disc. • The speakers and components are connected poorly. • Connect the speakers and components securely. • The DVD/CD Receiver is located too close to the TV. • Move your TV away from the audio components. The remote control does not work properly. The front panel display is too dim. Correction • Connect the antenna securely. • Adjust the antennas and connect an external antenna if necessary. • The signal strength of the stations is too weak (when tuning in with automatic tuning). • Tune in the station manually. • No stations have been preset or preset stations have been cleared (when tuning by scanning preset stations). • Preset the stations (page 21). • The remote control is not pointed at the remote sensor of the DVD/CD Receiver. • Point the remote control at the remote sensor of the DVD/CD Receiver. • The remote control is too far from the DVD/CD Receiver. • Use the remote control within about 23 ft (7 m). • There is an obstacle in the path of the remote control and the DVD/CD Receiver. • Remove the obstacle. • The batteries in the remote control are flat. • Replace the batteries with new ones. • Nothing is displayed on the front panel display. • Press DIMMER on the remote control. Reference Cause Symptom Radio stations cannot • The antenna is positioned or connected poorly. be tuned in. 25 Specifications Video CD/DVD General Power supply Power consumption Net Weight External dimensions (W x H x D) Operating conditions Operating humidity Laser Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input Video output S-video output Amplifier AM [MW] Tuner FM COMPONENT VIDEO OUT Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Stereo mode Surround mode (* Depending on the sound mode settings and the source, there may be no sound output.) Inputs Speakers Outputs Type Impedance Frequency Response Sound Pressure Level Rated Input Power Max. Input Power Net Dimensions (W x H x D) Net Weight Refer to main label. Refer to main label. 2.2 kg 430 x 57 x 295 mm Temperature: 5°C to 35°C, Operation status: Horizontal 5% to 85% Semiconductor laser, wavelength 650 nm PAL 625/50, NTSC 525/60 150 Hz to 18 kHz More than 80 dB (1 kHz, NOP -6 dB, 20 kHz LPF/A-Filter) More than 85 dB 0.5 % (1 kHz, at 1W position) (20 kHz LPF) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1/ SCART (TO TV) (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x 1 (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 ohms, negative sync, RCA jack x 1 (PB)/(PR) 0.7 V (p-p), 75 ohms, RCA jack x 1 87.5 - 108.0 MHz or 65.0 - 74.0 MHz, 87.5 - 108.0 MHz 10.7 MHz 60 dB (Mono) 140 - 10000 Hz 522 - 1,620 kHz or 520 - 1,720 kHz 450 kHz 100W + 100W (4 Ω at 1 kHz, THD 10 %) Front: 100W + 100W (4 Ω, THD 10 %) Center*: 100W Surround*: 100W + 100W (4 Ω at 1 kHz, THD 10 %) Active subwoofer*: 200W (3 Ω at 30 Hz, THD 10 %) EURO AV1 (TO TV), AV2 AUDIO INPUT (L/R)/ VIDEO INPUT, OPTICAL IN S-VIDEO OUT, VIDEO OUT, HDMI OUT, EURO AV1 (TO TV), COMPONENT VIDEO OUT Front/Rear Speaker Center speaker Active Subwoofer (SH72TP-F/S) (SH72TP-C) (SH72TP-A) 3 Way 4 Speaker 2 Way 3 Speaker 1 Way 1 Speaker 4Ω 4Ω 3Ω 80 - 18,000 Hz 80 - 18,000 Hz 40 - 1,500 Hz 83 dB/W (1m) 83 dB/W (1m) 82 dB/W (1m) 100 W 100 W 200 W 200 W 200 W 400 W 272 x 1350 x 272 mm 500 x 172 x 151 mm 236 x 450 x 382 mm 6.5 kg/6.2 kg 1.8 kg 10.9 kg ❋ Designs and specifications are subject to change without notice. 26 P/NO : MFL34656541
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project