advertisement
▼
Scroll to page 2
of 32
Colour Television OWNER'S MANUAL BZ03 Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back mation to your dealer when you Model number : Serial number : cover require and quote this infor- service. Contents Installation 3 Location and function of controls Remote control handset Battery installation Front panel 4 Basic operation On and off / Programme selection Volume adjustment / Quick view Mute function / Auto Demonstration On screen language selection (option) 8 On 9 screen menus Menu selection up TV stations Auto programme tuning Manual programme tuning Fine tuning / Programme edit Favourite programme Calling the programme table Setting 10 Picture adjustment PSM (Picture Status Memory) DRPC (Digital Reality Picture Clarity) VM (Velocity Modulation) Picture adjustment Convergence / Picture format Turbo picture selection (option) 15 Sound adjustment SSM (Sound Status Memory) / Sound adjustment Turbo sound selection (option) Sound output selection / Stereo/Dual reception NICAM reception (option) 19 Time setting Clock / On/Off time Auto sleep 22 Other functions TV and AV modes / VGA mode Auto AV switching (option) Child lock / Sleep timer PIP 23 (option) 25 operation (option) On and off / Input mode selection for sub picture Swapping between main and sub pictures Programme selection for sub picture Sub picture size / Sub picture freeze Sub picture position change / Programme scan Teletext (option) Switch on/off SIMPLE text / TOP text (option) FASTEXT / Special teletext functions 26 Connection of external equipment Aerial socket / Euro scart sockets (option) Audio/Video in/out sockets (option) Variable Audio out sockets (AUDIO OUT) S-Video/Audio in sockets (S-AV) (option Component in sockets / Monitor out sockets PC Input/Audio in sockets (option) 29 Troubleshooting 2 check list Back cover Installation Power This set operates on an AC mains supply, the voltage is as indicated on the label on the back cover. Never apply DC power to the set. In the event of thunderstorms ial and mains or powercuts, please pull out the aer- plugs. Warning To prevent fire moisture. The working or shock hazard, do not expose the set to rain life of this set is 7 years since the date of delivery or to consumer. Service Never remove the back high voltage properly, unplug it very cover of the set as this can expose you to and other hazards. If the set does not operate and call your dealer. Aerial Connect the aerial cable to the socket marked +75 Ω For the best cover. reception an on the back outdoor aerial should be used. Location Position your set so that no bright light or sunlight falls directly onto screen. Care should be taken not to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the the set is in position to allow a free flow openings on the back cover. the set on a sloping or unstable place placed a of air. Do not cover the ventilation Do not on the bottom of the set may When ture displaying still pictures cause such it to as move persisted on the the casters videogames, 16:9 a long time, format, PIP display, and station label for may be area as and to be damaged. 4:3 picthe image or screen. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories. (In RT-40NZ60 series only) 3 Location and function of controls POWER 1 TV/AV MULTIMEDIA 2 SOUND 34 TURBO PICTURE PIP PR+ SWAP MENU INPUT PR MUTE OK 2. TV/AV selects TV or AV mode. switches the set on from 3. TURBO SOUND BUTTON selects Turbo sound. 4. PIP BUTTONS (option) PIP switches the sub picture on or off. PR +/selects a programme for the sub picture. SWAP alternates between main and sub picture. INPUT selects the input mode for the sub picture. SIZE adjusts the sub picture size. STILL freezes motion of the sub picture. POSITION relocates the sub picture in clockwise direction. SCAN switches on or off the programme scan mode 12 sub 5. MENU selects VOL 6 PR 123 456 7 7 8 9 0 PSM SSM 17 8 POSITION SCAN STILL 18 SIZE MIX TIME SLEEP REVEAL ? LIST M 19 9 10 I/II Q.VIEW STOP P/STILL 11 REW PLAY ARC REC 20 21 FF 6. TELETEXT / (With SOUND be controlled with the remote control handset. also be adjusted with the buttons on the front 14 Before you use the remote control handset, please install the batteries. See the next page. 15 1. POWER switches the set on from standby or off to standby. 16 5 VOL can can 13 Remote control handset TEXT PR- 12 All the functions Some functions panel of the set. PIP) / (Programme Up/Down) selects a programme or a menu item. switches the set on from standby. / (Volume Up/Down) adjusts the volume. menu OK settings. accepts your selection PIP 4 PR- SWAP MENU INPUT PR 7 8 9 PSM 0 SSM POSITION SCAN STILL SLEEP LIST Q.VIEW ARC SIZE I/II (Without TELETEXT/With PIP) 4 NUMBER BUTTONS switches the set on from 8. PSM (Picture Status recalls your preferred 9. SLEEP sets the MUTE 56 or 7. PR+ pictures. a menu. adjusts PICTURE standby. sleep displays standby the current mode. or directly select a number. Memory) picture setting. timer. 10. I/II selects the language during dual language broadcast. selects the sound output (option). 11. VCR BUTTONS control a LG video cassette recorder. Location and function of controls 12. MULTIMEDIA selects Component 1 or POWER Component 2 modes. 1 TV/AV 13. TURBO PICTURE BUTTON selects Turbo picture. 2 SOUND MULTIMEDIA TURBO PICTURE 12 13 3 14. TELETEXT BUTTONS (option) These buttons are used for teletext. For further details, see the 'Teletext' section. MENU 15. SWAP returns to the selects a VOL 16. MUTE switches the sound on or 18. STILL freezes motion of the VOL 123 picture. 456 the programme table. picture 7 8 9 PSM 0 SSM 17 8 SLEEP format. LIST STILL Q.VIEW ARC 19 18 9 I/II 21. Q.VIEW 20 21 10 returns to the a viewed programme. favourite programme. previously STOP 11 * : No function COLOURED BUTTONS TELETEXT OK PR 7 selects 16 off. 19. LIST 20. ARC select your desired MUTE 6 17. SSM (Sound Status Memory) recalls your preferred sound setting. displays PR 5 viewed programme. favourite programme. previously models) or : These buttons programme edit. are used for teletext REW P/STILL REC PLAY FF (only Note : In teletext mode, the PR +/-, SWAP and INPUT buttons used for teletext function. are (Without PIP/TELETEXT) Battery installation SOUND PICTURE TEXT The remote control handset is powered by two AAA type batteries. To load the batteries, turn the remote control handset over and open the battery compartment. Install two batteries as indicated by the polarity symbols ( + and ) marked inside the compartment. 14 - MENU PR MUTE 5 Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the remote control handset for an extended period of time. 7 8 9 PSM 0 SSM UPDATE INDEX SIZE TIME MIX I/II SLEEP HOLD REVEAL M Q.VIEW ? LIST ARC (With TELETEXT/Without PIP) 5 Location and function of controls Front ? panel RT-44/49/54NA13/14 series ? 2 RT-44/49/54NA23/24 series 2 3 PR MNU 1 TV/AV 8 OL MUTE OK OK VOL TV/AV TV/AV ONOFF 14 ? PR VOL MUTE 5678 OK PR N/OFF MENU MENU VOL MENU VOL OK MUTE PR MUTE PR VOL V/AV PR ON/OFF RT-62NA33 series 3 675 4 2 ? RT-44/49/54NA43/44 series 9 TVAV OK MENU INDEX STANDBY POWERON VOL PR 1 2 PR MUTE PR MENU 5678 3 PR OK VOL TV/AV MUTE PR MNU VOL OK VOL 1 VOL TV/AV POWR TV/AV OK MENU INDEX STAND BY POWER ON VOL PR 4 8 ? RT-44/49/54NZ23 series 7610 ? RT-40/49/56NZ60 series 2 2 TVAV MNU OK OL PR TV/AV MENU 6 VOL OK 8674 11 41 1 TV/AV 3 4 11 ON/OFF MENU OK MUTE VOL PR PR 3 8675 3 Location and function of controls Front ? panel RT-44/49/54A85 series AV3 PR 2 10 DIGITAL INDEX OR O VOL MENU LR LS 678 OK RS CAV TV/AV VOL PR DITLNEX M T PR MNU OL OK OL T/V ONOFF 14 11 ? S-VIDEOL/MN C PR 3 12 AUDIO ON/OFF R RT-39NZ43 series 2 S-VIDEOL/MN 12 TV/AV 1 VAV NU O NDEX OL MENU OK VOL INDEX PR AUDIO R R AV3 86710 3 411 (Side panel) 1. MAIN POWER switches the set 11. LED on or (Light Emitting Diode) DISPLAY brightly when the set is switched Option : Only RT-40NZ60 series, off. illuminates 2. REMOTE CONTROL SENSOR 3. F / G : : (Volume Up/Down) adjusts the volume. adjusts menu settings. D / E (Programme Up/Down) selects programme or a menu item. switches the set on from standby. 4. STEREO : SLEEP : LOCK : a brightly (AV3) Connect the audio/video out sockets of exter- when the set is in nal standby equipment to these sockets. S-VIDEO/AUDIO IN SOCKETS mode. dims when the set is switched PAL/SECAM input signal indicator NTSC input signal indicator STEREO sound indicator SLEEP timer indicator CHILD LOCK setting indicator 12. AUDIO/VIDEO IN SOCKETS POWER/STANDBY INDICATOR illuminates on. Connect the video out socket of on. (S-AV) S-VIDEO an VCR to the S-VIDEO socket. 5. MUTE Connect switches the sound 6. off. the audio out sockets VIDEO VCR to the audio sockets of as the S- in AV 3 . MENU selects 7. on or 13. CENTRE SPEAKER a menu. (RT-48/53A82 series only) LEFT/RIGHT LOUD-SPEAKERS OK mode. Only in PT-49/54A85 left/right loud-speakers TV/AV sockets accepts your selection or displays the current series are model, the detachable and need to be connected to the SPEAKER OUT 8. selects TV clears the or menu switches the set 9. LCD panel of the set as indi(+) and black (-) knobs. Note : Before placing the speakers, screw the speaker legs to the holes on them. AV mode. cated / text from the on from screen. standby. (Liquid Crystal Diode) * the back red CASTERS turn and on or on DISPLAY 10. INDEX switches LED DISPLAY by off. (on the bottom) the set easily. move 7 Basic operation On and off 1. 2. 3. 4. Press the main power button to switch the set on. If the set is in standby mode, press the POWER, TV/AV or / NUMBER buttons on the remote control handset to switch it on fully. Press the POWER button on the remote control handset. The set reverts to standby mode. Press the main power button again to switch the set off. , Note : If, while the set is switched on, the mains plug is disconnected the set will switch to standby or power on when the mains plug is replaced in the mains power socket. POWER TV/AV TURBO SOUND Programme selection You can select buttons. a Volume MENU VOL PR OK MUTE VOL programme number with the / or NUMBER adjustment Press the / button to adjust the volume. Note : When the TV (speaker) is On, it's available. Quick view Press the Q.VIEW button to view the last programme you were watching. Note : This function works only when Favourite programme is a stored set to Off. Otherwise each press of this button will select PR favorite programme. 123 456 7 8 9 0 SSM Mute function Press the MUTE button. The sound is switched off and the W appears. You can cancel it SOUND button. by pressing the MUTE, / , display SSM, I/II, TURBO Auto Demonstration I/II Q.VIEW programmed in the set, press the OK butcontrol for about 5 seconds. To stop auto demonstration, press any button of the front panel control or POWER button of the remote control. To review all the ton of the front On screen menus panel language selection The menu can be displayed on the guage. First select your language. 1. 2. 3. Press the MENU button and then Special Press the button and then Language. Press the button and then All the on screen Press the OK or 8 screen in your desired lan- button to select the / menu. language. 4. (option) Repeatedly viewing. / / button to select button to select your desired will appear in the selected language. button to select the Special menu. displays press the MENU button to return to normal TV On The an dialogue operator also screen menus between you and your set takes place on screen with The buttons required for the operating steps are menu. displayed. Menu selection 1. Press the MENU button and then D / E button to display each menu. 2. 3. 4. Press the G button and then D / E button to select a menu item. Press the G button to display the sub menu or the pull-down menu. Change the setting of an item in the sub or pull-down menu with F/GorD/E. You can move to the higher level menu by pressing the F button and to move to the lower level menu by pressing the G button. Note : a. In the teletext mode, menus are not displayed. b. In some models, the Normal/Turbo search will not display, only the Start will display in the Auto programme menu. c. On some models, the Language will not display. MENU PR Auto programme Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { System StorageOfrom { NormalOsearch TurboOsearch { { { OBG OOI ODK OOM VOL ()O}{OOKOMENU Station OK VOL ()O}{OOKOMENU menu Manual programme Picture PSM DRPC VM Contrast { Storage System { { { Channel { { { Fine { Brightness { Sharpness Convergence { Search Name Booster { Colour { { ()O}{OOKOMENU menu Programme Sound SSM AVL DBS TV Balance PR { ()O}{OOKOMENU Picture 2 { { { { edit OO0OOCO03 OO5OOSO69 O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 { O3OOSO66OOO8OOCO09 { O4OOSO67OOO9OOCO11 DeleteOOOOCopy MoveOOOOOOSkip ()}{OOKOMENU ()O}{OOKOMENU Sound menu Time Clock { OffOtime OnOtime { AutoOsleep { { ()O}{OOKOMENU Time menu Special Language Input InputOOO( { ) ChildOlock { { { ()O}{OOKOMENU Special menu TV programme 9 Setting up Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { TV stations Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the / or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. Note : In some models up to 200 TV stations can be stored. ()O}{OOKOMENU Auto programme tuning All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. 1. 2. Press the MENU button and then Station menu. Press the button and then / / button to select the button to select Auto pro- gramme. 3. Press the button to display the Auto programme menu. Auto programme MENU System StorageOfrom { NormalOsearch TurboOsearch { OBG OOI ODK OOM { { PR ()O}{OOKOMENU VOL OK VOL PR 123 456 78 0 9 Press the button. Select a TV system with the button / on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) 5. Press the OK or button. 6. Press the button to select Storage from. / 7. Press the button. Select the beginning programme number with the / button or NUMBER buttons on the Storage from pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. 8. Press the OK button. 9. Press the button to select Normal or Turbo search. / Option: In some models, you can only select Start. Note : a. Turbo search is further faster than Normal search and in some models, these searches will automatically store all receivable stations. b. If the programmed station has poor quality sound, select the system again in the Manual programme menu. 10. Press the button to begin auto programming. All receivable stations are stored. 4. Auto programme Auto programme System StorageOfrom { { NormalOsearch TurboOsearch { OCO01O(BG) { System StorageOfrom { { NormalOsearch TurboOsearch { 77O7O7O736% MENU { OCO01O(BG) 77O7O7O736% MENU (Normal search) (Turbo search) To stop auto programming, press the MENU button. When auto programming is completed, the Programme edit menu appears on the screen. See the 'Programme edit' section to edit the stored programme. 11. Repeatedly press the MENU button to return to normal TV viewing. 10 Setting up Manual programme TV stations Station tuning Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. 1. 2. 3. Press the MENU button and then button to select the / Station menu. Press the button and then button to select Manual / programme. Press the button to display the Manual programme AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { ()O}{OOKOMENU menu. Manual programme Storage System { Channel { Fine { Search Name Booster { { 2 { { ()O}{OOKOMENU 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Press the button to select Storage. / Press the button to select the programme number. Select the desired programme number with the / button or NUMBER buttons on the Storage pull-down menu. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK button. Press the button to select System. / Press the button. Select a TV system with the button / on the System pull-down menu; BG : (Asia/New Zealand/M.East/Africa/Australia) I : (Hong Kong/South Africa) DK : (East Europe/China/Africa/CIS) M : (USA/Korea/Philippines) (option) Press the OK or button. Press the button to select Channel. / Press the button. Press the button to select V/UHF or / Cable on the Channel pull-down menu. If possible, select the channel number directly with the number buttons. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. Press the OK or button. Press the button to select Search. / Press the button. Press the / button to commence searching on the Search pull-down menu. If a station is found the search will stop. Press the OK button to store it. The display Stored will appear. MENU VOL PR OK VOL PR 123 456 78 9 0 Manual programme Storage System { Channel { Fine { Search Name Booster { { {{{{ { { Stored 16. To store another station, repeat steps 4 to 15. 17. Repeatedly press the MENU button to return to normal TV viewing. 11 TV stations Setting up Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { Assigning a station name 1. Repeat the 'Manual programme tuning' steps 2. 3. 4. ()O}{OOKOMENU 5. 6. 7. 1 to 3. Press the button to select Name. / Press the button on the Name pull-down menu. Press the button. You can use a blank, +, -, the numeric 0 to 9 and the alphabet A to Z. With the button you can select in the opposite direction. Select the position by pressing the / button and then make your choice of the second character, and so on. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Booster (option) In some models, Booster is an optional function. Booster can perform this function. MENU VOL a set with If the reception is poor at the fringe area of TV signal, select Booster to On. When the picture condition is good, do not select Booster to On. PR OK Only VOL 1. 2. 3. 4. 5. 6. PR 123 the 'Manual programme tuning' steps 1 to 3. the button to select Booster. / the button. the button to select On or Off on the Booster / Repeat Press Press Press down Press pull- menu. the OK or Repeatedly press viewing. button. the MENU button to return to normal TV 456 78 0 9 Fine tuning Normally 1. 2. 3. fine tuning is only necessary if reception is poor. the 'Manual programme tuning' steps 1 to 3. Press the button to select Fine. / Press the button. Repeat Manual programme Storage System { Channel { Fine { { Search Name Booster { {{{{ { { }{OOKOMENU 4. 5. 6. Press the / button to fine tune for the best picture and sound on the Fine pull-down menu. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. The finely tuned programme will be ber during programme selection. 12 indicated by a yellow num- Setting up Programme TV stations edit Station This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or insert a blank station data into the selected programme number. 1. 2. 3. Press the MENU button and then button to select the / Station menu. Press the button and then button to select / Programme edit. Press the button to display the Programme edit menu. Programme AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { ()O}{OOKOMENU edit OO0OOCO03 OO5OOSO69 O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 DeleteOOOOCopy MoveOOOOOOSkip ()}{OOKOMENU Deleting 1. 2. a programme Select a programme to be deleted with the or / button. / Press the RED button twice. The selected programme is deleted, all the following programmes are shifted up one position. MENU PR VOL VOL Copying 1. 2. a programme Select a programme to be copied with the / Press the GREEN button. All the following programmes are shifted down Moving 1. 2. 3. 4. or one / button. position. a programme Select a programme to be moved with the or / button. / Press the YELLOW button. Move the programme to the desired programme number with the or / button. / Press the YELLOW button again to release this function. Programme PR 123 456 78 9 0 edit OO0OOCO03 OO5OOSO69 O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 O4OOSO67OOO9OOCO11 MoveOOff ()}{OMENU a programme number Select a programme number to be skipped with the or / / button. Press the BLUE button. The skipped programme turns to blue. Press the BLUE button again to release the skipped programme. When a programme number is skipped it means that button during nor/ you will be unable to select it using the mal TV viewing. If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu. Skipping 1. 2. 3. Repeatedly press the MENU button to return to normal TV viewing. 13 Setting up Station AutoOprogramme ManualOprogramme { ProgrammeOedit FavouriteOprogramme { { { TV stations Favourite programme This function lets you select your favourite programmes 1. 2. directly. Press the MENU button and then button to select the / Station menu. Press the button and then button to select Favourite / programme. ()O}{OOKOMENU 3. Press the button. Favourite programme AutoOprogramme ManualOprogramme { Off { ProgrammeOedit FavouriteOprogramme { 56O CO 05 { }{O()OOKOMENU 4. 5. 6. MENU PR 7. VOL OK VOL 8. 9. Press the / button to select On or Off. Press the button to select -----. / Select a desired programme with the / button or NUMBER buttons. Any number under 10 is entered with a numeric '0' (or '00') in front of it, i.e. '05' (or '005') for 5. To store another programme, repeat steps 5 to 6. You can store up to 8 programmes. Press the OK button. Repeatedly press the MENU button to return to normal TV -- viewing. Repeatedly press the Q.VIEW favourite programmes. Calling PR 123 456 78 9 0 or SWAP button to select stored the programme table You can check the programmes stored in the memory the programme table. by displaying programme table Press the LIST button to display the Programme table menu. The programme table appears on the screen. One programme table contains ten programmes as below. Displaying Station OO0OOCO03 OO5OOSO69 O1OOCO03OOO6OOSO17 O2OOCO12OOO7OOSO22 O3OOSO66OOO8OOCO09 LIST O4OOSO67OOO9OOCO11 Q.VIEW ()}{OOKOMENU Note : a. You may find some blue programmes. They have been set up to be skipped by auto programming or in the programme edit mode. b. Some programmes with the channel number shown in the programme table indicate there is no station name assigned. a programme in the programme table Select a programme with the or / button. / Then press the OK button. The set switches to the chosen programme number. Selecting Paging through a programme table are 10 (or 20) programme table pages which contain 100 (or 200) programmes. or / button repeatedly turns the pages. / Pressing the Repeatedly press the MENU button to return to normal TV viewing. There 14 Picture PSM 1. adjustment Picture (Picture Status Memory) 2. 3. Press the MENU button and then button to select the / Picture menu. Press the button and then button to select PSM. / Press the button and then button to select a picture / setting on the PSM pull-down menu. OOO Picture PSM { Dynamic OOO 4. Press the OK 5. Repeatedly viewing. You button. the MENU button to return to normal TV press or a desired picture (Dynamic, Standard, User) with PSM button on the remote control. The picture Dynamic, Standard, Mild and Game are programmed for optimum picture reproduction at the factory and cannot be changed. can also recall Mild, Game DRPC 1. or (Digital Reality Picture Clarity) 2. 3. Press the MENU button and then button to select the / Picture menu. Press the button and then button to select DRPC. / Press the button and then button to select On or Off / on the DRPC pull-down menu. Press the OK or button. Repeatedly press the MENU button to return to normal TV 4. 5. viewing. VM (Velocity Modulation) This is the function to enhance the 1. 2. 3. sharpness Press the MENU button and then Picture menu. Press the button and then / Press the button and then / / of image edge. button to select the button to select VM. button to adjust the vm. Picture VM { 1 OO 4. 5. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. 15 Picture Picture Picture PSM DRPC VM Contrast { Brightness { Colour { Sharpness Convergence { { adjustment adjustment { { { You can ness adjust picture contrast, brightness, colour intensity, sharp(NTSC AV only) to the levels you prefer. and tint ()O}{OOKOMENU 1. Press the MENU button and then Picture 2. / button to select the menu. Press the button and then Brightness, Colour or button to select Contrast, / Sharpness. Picture PSM DRPC VM Contrast { Brightness { Colour { Sharpness Convergence { { { { 50 { ()O}{OOKOMENU MENU 3. PR Press the button and then adjustments on the each sub / button to make Contrast VOL OK appropriate menu. 80 VOL }{O()OOKOMENU 4. 5. PR 16 Press the OK button to store it for the Repeatedly viewing. picture user. press the MENU button to return to normal TV Picture adjustment Picture Convergence This function enables you to adjust the colour convergence of screen all area or 9 points during receiving the signals. When the set is first installed or it is relocated, the picture may be unstable with three colour ghosts (red, green, blue). This problem can be solved by adjusting the colour convergence. 1. 2. Press the MENU button and then Picture menu. Press the button and then PSM DRPC VM Contrast { Brightness { Colour { Sharpness Convergence { { { { { ()O}{OOKOMENU button to select the / / button to select TV/AV Convergence. 3. Press the button and then or 9 (9 point convergence) button to select 1 / (All point convergence). Picture PSM DRPC VM Contrast { Brightness { Colour { Sharpness Convergence { { { { MENU PR {1{ 9{ ()O}{OOKOMENU 4. Press the button. The display VOL OK VOL is selected in red. If the display + are unstable with three colour convergence needs to be adjusted. ghosts, the colour PR ()O}{O1-9OTV/AVOOKOMENU ()O}{OTV/AVOOKOMENU If the display + is white, colour convergence adjustment is not necessary. in blue. Press the TV/AV button to select the display 9 : selection Press the number to button to select Only (1 9) the position you want to adjust the convergence. 7. Press the / button to superimpose the display + / / (red or blue) with the green one. The display + is moved to the left, right, up or down by pressing the / button. / / 8. If the red and blue display + are superimposed with the green one, the display + will be changed to yellow or cyan. 9. Press the OK button to store it for the convergence. 10. Repeatedly press the MENU button to return to normal TV view- 5. 6. ing. Note : a. Press the MENU button to cancel the adjustment before saving. b. If the picture needs to be adjusted more after 1 (All point convergence) adjustment, you can adjust the 9 (9 point convergence) for the position you want to adjust. c. Adjust the convergence according to a broadcasting system (50Hz or 60Hz) each. 17 Picture adjustment Picture format Picture PSM DRPC VM Contrast { Brightness { Colour { Sharpness Convergence { { { { { ()O}{OOKOMENU You can watch TV in various picture formats; 16:9, 14:9, Zoom, Auto and 4:3. In some models, you can watch TV in various picture formats; 4:3 and 16:9. Repeatedly press the ARC button to select your desired picture format. 4:3 This TURBO PICTURE picture 16:9 You can format is 4 to 3 of general enjoy the cinema (the picture through the 16:9 mode. TV. format of 16:9) or general TV programme 14:9 The screen 14:9 is viewed just like that but the screen 4:3 is magnified to the upper / lower and left / right so that the screen 14:9 is full. You can move the screen up or down with button. / Zoom You can enjoy the cinema in a vast screen through the Zoom mode. The screen 4:3 is magnified to the upper/lower and left/right sides so that the screen 16:9 is full. The bottom and top of the picture may be lost. You can move the screen up or down with button. / Auto When your TV receives the wide screen signal, it will be automatically changed to the picture format to be sent. PSM ARC Note : In the double window, ARC function isn't available. scan Turbo (option) picture selection mode and Component 1080i, When this function is on, the picture will be more brilliant and distinct than normal. Repeatedly press the TURBO PICTURE button to switch on or off. (Turbo Picture off) (Turbo Picture on) : If you press the PSM button with the Turbo picture function, the Turbo picture function is automatically switched off. Note 18 Sound SSM You (Sound Status Memory) frequency 2. 3. Sound select your can preferred sound setting; Dolby Virtual (option), Speech and you can also adjust the sound equalizer. Flat, Music, Movie 1. adjustment of the or Press the MENU button and then button to select the / Sound menu. Press the button and then button to select SSM. / Press the button and then button to select a sound set/ ting on the SSM pull-down menu. OOO Sound SSM { O Flat OOO Dolby Virtual (option) Dolby Virtual lets you experience panoramic Sound effects of sound. Frequency Adjustment 0.1OOOOO OOO Press the button in User to display the User sub menu. b. Select a sound band by pressing the / button. c. Select appropriate sound level with the button. / d. Press the OK button to store it for the sound User. a. Repeatedly press You the MENU button to return to normal TV also recall can a desired sound (Dolby Virtual with SSM button viewing. (option),Flat, the remote control. The sound Dolby Virtual (option), Flat, Music, Movie and Speech are programmed for optimum sound reproduction at the factory and cannot be changed. Music, Movie, Speech or User) on If you press the SSM button after making appropriate adjustment on the User sub menu, the display User automatically Note : appears Dolby even though you have already set a factory preset setting; (option), Flat, Music, Movie or Speech. Virtual 19 Sound Sound Sound SSM AVL DBS TV Balance { { { { { ()O}{OOKOMENU adjustment adjustment You can adjust AVL (Auto Volume Leveler), DBS, TV Speaker or balance. AVL automatically keeps on the equal volume level even if you change programmes. If you switch DBS to on, the set creates a dynamic bass sound. The Turbo sound creates an all around sound as in a concert hall. 1. 2. the MENU button to select the Sound menu. Press the button and then button to select the desired / sound item ; AV L DBS, TV (Speaker) or Balance Repeatedly press , Sound TURBO SOUND SSM { AVL { DBS { TV { Balance { 0 ()O}OOKOMENU MENU PR In the AVL DBS and TV (Speaker) on the Sound menu, press the button to select On or Off / In the Balance on the Sound menu, make desired adjustment with the / button on the Balance pull-down menu. Repeatedly press the MENU button to return to normal TV , VOL OK VOL 3. viewing. Turbo sound selection PR (option) When this function is on, the sound will be more emphasized and amplified than normal. Repeatedly press the TURBO SOUND button to switch on or off. MEGA TURBO (Turbo I/II Sound off) (Turbo Sound on) Sound output selection In AV mode, you can select output sound for the left and right loud- speakers. Repeatedly press the I/II button to select the sound output. : Audio signal from audio L input is sent to left loud-speaker and audio signal from audio R input is sent to right loudspeaker. L+L : Audio signal from audio L input is sent to left and right loudspeakers. R+R : Audio signal from audio R input is sent to left and right loudspeakers. L+R 20 Sound Stereo/Dual adjustment reception When a programme is selected, the sound information for the station appears after the programme number and station name disap- pear. Broadcast On Screen Mono MONO Stereo STEREO Dual DUAL I Display Mono sound selection In stereo reception if the stereo signal is weak, you can switch to mono by pressing the I/II button twice. In mono reception the depth of sound is improved. To switch back to stereo, press the I/II button twice again. Language If selection for dual language broadcast programme is received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II by pressing the I/II button repeatedly. DUAL I sends the primary broadcast language to the loudspeakers. DUAL II sends the secondary broadcast language to the louda speakers. DUAL I+II sends NICAM a separate language to each loudspeaker. reception (option) If your set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Commanding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. 1. 2. 3. When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or MONO. When FM mono is selected the display MONO appears on the screen. 21 Time setting Clock Time Clock { OffOtime OnOtime { AutoOsleep { 1. { 2. 3. Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to select Clock. Press the G button and then D / E button to adjust the hour. Time ()O}{OOKOMENU Clock { OffOtime OnOtime { AutoOsleep { -i-o:o-i- AM { ()O}{OOKOMENU 4. 5. 6. G Press the button and then D / E button to adjust the minute. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. On/Off time MENU By using this function, the set automatically switches on or off at a preset time. You must set the time correctly before using on/off time PR function. 1. VOL OK VOL 2. 3. Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to select Off time/On time. Press the G button and then D / E button to adjust the hour. Time PR Clock { OffOtime OnOtime { { -i-o:o-i- AM AutoOsleep { Pr 1 VOLOOO30 Off ()O}{OOKOMENU 4. 5. 6. 7. Press the G button and then D / E button to adjust the minute. Only On time function; Press the G button and then D / E button to adjust programme number and volume level. Press the OK button. Repeatedly press the MENU button to return to normal TV viewing. Note : a. On time function works only in standby mode. b. To view the remaining on/off time, select the Time menu. c. When you switch the main power off, the Clock is reset. d. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. e. Once the on or off time is set, these functions operate daily at the preset time. Auto sleep If you select On on the Auto sleep pull-down menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. 1. 2. 3. 4. 5. Press the MENU button and then D / E button to select the Time menu. Press the G button and then D / E button to select Auto sleep. Press the G button and then D / E button to select On or Off on the Auto sleep pull-down menu. Press the OK or F button. Repeatedly press the MENU button to return to normal TV viewing. 22 Other functions TV and AV modes Special be set for TV or AV mode. AV mode is used when a video cassette recorder (VCR), or other equipment is connected to the set. Inputs can Note : When a VCR is connected via the aerial socket the set is used in TV mode. See the 'Connection of external equipment' section. 1. 2. 3. Press the MENU button and then D / Language Input InputOOO() { ChildOlock { { { ()O}{OOKOMENU button to select the E Special menu. the G button Press and then D / E button to select Input. Press the G button and then D / E button to selectTV, AV1, AV 2 AV 3 AV4 S-VIDEO4 (option), COMPONENT 1, COMPONENT 2 or VGA (option) on the Input pull-down menu. , , , TV/AV Special Language Input InputOOO( { { TV AV1 AV2 AV3 AV4 COMPONENT1 COMPONENT2 { ) ChildOlock { MENU ()O}OOKOMENU VCR connected to the AV1 sockets on the set VCR connected to the AV2 sockets on the set : VCR connected to the AV3 sockets on the set : VCR connected to the Euro scart socket on the set (option) S-VIDEO4 : S-VIDEO VCR connected to the Euro scart socket on the set (option) COMPONENT1/2 : COMPONENT connected to the COMPONENT1/2 sockets on the set VGA : PC connected to the PC (VGA) sockets on the set (option) Repeatedly press the MENU button to return to normal TV viewAV1 AV2 AV3 AV4 4. PR : : VOL VOL PR ing. Alternatively you can select the TV or AV mode TV/AV button. In AV tons. mode, to return to TV mode, press the VGA mode D / by pressing E or the NUMBER but- (option) You can adjust picture contrast, brightness, convergence. 1. Press the MENU button and then D / E button to select the 2. 3. Special menu. G button Press the Press the G and then button and then Input pull-down D D / / E E button to select Input. button to select VGA on the menu. OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO O O O O O Input { Contrast { Brightness { V-Position H-Position { Convergence { { TV AV1 AV2 AV3 AV4 COMPONENT1 COMPONENT2 VGA O ()O}{OOKOMENUOTV 4. 5. AV Press the MENU button. Press the D / E button to select Contrast, Brightness, VPosition, H-Position or Convergence on the VGA mode menu. 23 Other functions Contrast This function is to Special OOO O the display to the contrast desired. adjust the display to the Brightness This function is to OOO adjust brightness Horizontal Position / Vertical Position This function is to adjust picture to left/right and desired. up/down as you prefer. Convergence This function enables you to adjust the colour convergence of screen during receiving the signals. Note :The convergence isn't suitable to use in case of no PC cable signal. Auto AV switching (option) If your VCR outputs switching voltage when connected to the Euro socket, the set will switch to AV 4 mode automatically. But if or NUM/ you want to keep on watching TV mode, press the scart BER buttons. Press the TV/AV button to return to AV modes. Child lock The TV can be set so that the remote control handset is needed to control it. This feature can be used to prevent unauthorized viewing. 1. Press the MENU button and then Special 2. 3. 4. 5. / button to select the menu. Press the button and then button to select Child / lock. Press the button and then button to select On or Off / on the Child lock pull-down menu. Press the OK or button. Repeatedly press the MENU button to return to normal TV viewing. With the lock on, the display Child lock on appears on the screen if any button on the front panel is pressed while viewing the TV. Note : The display Child lock on will not appear on the screen if any button on the front panel is pressed while displaying the menus. Sleep timer You don't have to remember to switch the set off before you go to bed. The sleep timer automatically switches the set to standby after the preset time elapses. Press the SLEEP button to select the number of minutes. The diswill appear on the screen, followed by 10, 20, 30, 60, play 90, 120, 180 and 240. The timer begins to count down from the number of minutes selected. --- Note : a. To view the remaining sleep time, press the SLEEP button once. b. To cancel the sleep time, repeatedly press the SLEEP button until the display appears. When you switch the set off, the set releases the preset sleep time. --- c. 24 PIP Option PIP is operation (option) : an optional function, so that set with PIP function can only the operate. PIP (Picture in Picture) displays a picture within a picture. On and off Press the PIP button to switch on the sub press this button again to switch it off. Note : Input In Component 1080i mode, PIP function isn't available. mode selection for sub Press the INPUT button to select the picture input Each time this button is pressed, each ture is displayed as shown below. Programme picture. mode for the sub input pic- PR+ SWAP AV3 AV4 PIP PR- AV2 AV1 number picture. mode for the sub INPUT Note : a. You can also adjust it in the Special menu. b. Yon can select the input mode for the sub picture, after connecting the external equipment. Swapping between main and sub Press the SWAP button to Programme exchange selection for sub pictures the main and sub pictures. picture Press the PR +/- buttons to select a programme for the sub picture. The selected programme number is displayed just below the programme number of main picture. Sub picture size Repeatedly press the SIZE button to select the desired sub size. The sub picture appears as below. 1/16 size of the main picture 1/9 size picture POSITION 1/2 size SCAN STILL SIZE Note : If broadcasting system of the main picture for PIP is differ from sub picture's for PIP, the sub picture not be natural. (ex: In case that main picture/sub picture is PAL/NTSC system) Sub picture freeze Press the STILL button to freeze motion of the sub Press this button again to restore motion. Sub picture. picture position change Press the POSITION button repeatedly until desired achieved. The sub pictures move clockwise. Programme position is scan This function enables you to search all the stored stations on 12 sub pictures and see your favorite station by exchanging the main and sub pictures. Press the SCAN button to select 12 sub pictures. The selected sub pictures search all the stored stations. Press the SCAN button again to switch off sub pictures. 25 Teletext (option) Teletext (or TOP text) is an optional function, therefore only with the teletext system can receive the teletext broadcast. a set free service broadcast by most TV stations which gives information on news, weather, television programmes, share prices and many other topics. Teletext is a up-to-the-minute The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number. TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information. TV/AV TEXT Switch on/off Press the TEXT button to switch to teletext. The initial page or last page appears on the screen. Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number indicates your selection, while the second shows the current page displayed. Press the TEXT button to switch off teletext. The previous mode PR reappears. OK SIMPLE text selection Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then reenter the correct page number. The button can be used to select the preceding or fol/ lowing page. Page 1. PR 123 456 78 2. 9 0 a colour button in LIST mode If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the M button to switch to LIST mode. Programming M Four teletext page numbers of your choice can be colour coded easily selected by pressing the corresponding coloured button and on 1. the remote control handset. Press a 2. Using the NUMBER buttons, select the page you wish to pro- 3. gramme. Press the OK button. Then the selected page is stored as the selected page number by blinking once. From now on, you can 4. select this page with the same coloured button. The three other coloured buttons are programmed in the way. 26 coloured button. same Teletext TOP text (option) (option) The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. Block / group / page selection 1. With the blue button you can progress from block to block. 2. Use the yellow button to proceed to the next group with automatic overflow to the next block. 3. With the green button you can proceed to the next existing page with automatic overflow to the next group. button can be used. Alternatively the 4. The red button permits to return to previous selection. button can be used. Alternatively the Direct page selection Corresponding to the SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER buttons in TOP mode. PR FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. selection i Press the button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode. The button can be used to select the preceding or fol/ lowing page. Page 1. 2. 3. 4. PR 123 456 78 9 0 27 Teletext Special (option) teletext functions REVEAL Press this button to display concealed information, such as puzzles. again to remove the information from the solutions of riddles Press this button or display. SIZE Selects double height text. enlarge the top button again to enlarge Press this button to Press this page. Press this button PR again half of the page. the bottom half of the to return to the normal display. UPDATE Displays the TV picture on the screen while waiting for the new will appear at the top left hand teletext page. The display corner of the screen. When the updated page is available then will change to the page number. display Press this button to view the updated teletext page. HOLD PR Stops change 9 To continue press this button MIX TIME REVEAL occur if a tele- the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inhibited. 0 SIZE which will sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button is pressed 456 78 the automatic page text page consists of 2 or more sub pages. The number of 123 ? again. MIX Displays the teletext pages superimposed on the TV pic- ture. To switch the TV picture off press this button again. TIME viewing a TV programme, press this button to display the time at the top right hand corner of the screen. Press this button again to remove the display. In the teletext mode, When press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or the sub page, press the RED / GREEN, NUMBER buttons. change Press this button 28 again to exit this function. / or Connection of external You can connect additional equipment, such as equipment VCRs, camcorders etc. to your set. Here shown may be somewhat different from your set. DVD/DTV INPUT COMPONENT1 COMPONENT2 (480i/480p/576i) (R) (R) (L) (L) PR PR PB PB Y Y AUDIO VIDEO Aerial socket LR (L)-AUDIO-(R) OUTPUT VIDEO AV2 AV4 AV1 MONO 1. 2. 3. 4. 5. VARIABLE AUDIO OUTPUT MONITOR ANT IN LL Connect the RF out socket of the VCR to the aerial socket on the back of the set. Connect the aerial cable to the RF aerial in socket of the VCR. Store the VCR channel on a desired programme number using the 'Manual programme tuning' section. Select the programme number where the VCR channel is stored. Press the PLAY button on the VCR. S-VIDEO VCR DVD INPUT COMPONENT1 COMPONENT2 (480i/480p/576i) (R) Euro scart socket 1. 2. (option) (L) PR PR PB PB Y Y VIDEO can VIDEO on AV2 MONO the remote control handset on the screen. by the TV on video tape. S-VIDEO VCR DVD/DTV INPUT playback picture appears also record programmes received a. b. c. COMPONENT1 COMPONENT2 (480i/480p/576i) (R) (R) (L) (L) PR PR PB PB Y Y AUDIO LR (L)-AUDIO-(R) OUTPUT VIDEO AV2 AV4 AV1 S-VIDEO : Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart can be received. These signals are transmitted, for example, by a pay TV decoder, game machine or photo CD unit, etc. If Euro scart 4 socket has been connected to the VCRs simultaneously, only the AV 4 can be received. If the set has been disconnected to the external equipment, only can be selected AV 4 VCR DVD/DTV INPUT COMPONENT1 COMPONENT2 (480i/480p/576i) (R) (R) (L) (L) PR PR PB PB Y Y AUDIO VIDEO Audio/Video in/out sockets LR (L)-AUDIO-(R ) 3. OUTPUT LL Connect the audio/video out sockets of the VCR to audio/video in sockets of the set and in sockets of the VCR to out sockets of the set. PresstheTV/AVbuttonto selectAV 1,AV 2 orAV 3. Press the PLAY button on the VCR. The VCR playback picture appears on the screen. You can VARIABLE AUDIO OUTPUT MONITOR (option) ANT IN VIDEO AV2 AV4 AV1 S-VIDEO MONO 2. VARIABLE AUDIO OUTPUT MONITOR ANT IN LL . 1. AV4 MONO AV1 MONO Note VARABLE AUDIOOUTPUT OUTPUT VIDEO VIDEO You (L)-AUDIO-(R) (L)-AUDIO-(R) MONITOR Otherwise press the TV/AV button . AUDIO ANT IN LL Connect the Euro scart socket of the VCR to the Euro scart socket of the set. Press the PLAY button on the VCR. If your VCR outputs a switching voltage connect to Euro scart socket, the set will switch to AV 4 mode automatically. But if you want to keep on watching TV mode, press the or NUM/ BER buttons. to select AV 4 The VCR (R) (L) also record programmes received out sockets. by the TV on video tape via audio/video Note : If you have a mono VCR, connect the audio cable from the VCR a. to the AUDIO L/MONO socket of the set. b. When the set has been connected to the external equipment, you can select AV or COMPONENT modes with the remote control handset. VCR S-VIDEOL/MN AUDIO R AV3 VCR 29 Connection of external equipment S-Video / Audio in sockets When ity DVD/DTV INPUT COMPONENT1 connecting will be further an (S-AV) (option) VCR to the S-VIDEO socket, the picture qual- improved. COMPONENT2 (480i/480p/576i) (R) (R) (L) (L) PR PR PB PB Y Y AUDIO VIDEO LR (L)-AUDIO-(R) VARIABLE MONTOR OUTPUT AUDIO OUTPUT ANT IN LL VIDEO 1. Connect the S-video socket of the VCR to the S-VIDEO socket AV2 AV4 of the set. AV1 MONO S-VIDEO 2. Connect the audio cable from the VCR to the AUDIO sockets of the set. VCR 3. Select AV1 4. Press the PLAY button The VCR Note : R by pressing on the TV/AV button repeatedly. the VCR. playback picture appears simultaneously, only Component AUDIO AV 3 on the screen. If both S-VIDEO and VIDEO sockets have been connected to the VCR S-VIDEOL/MN or the S-VIDEO can be received. in sockets AV3 1. S-VIDEO VCR 2. Connect the COMPONENT VIDEO output sockets (Y Cb Cr, YPbPr,YB-YR-YorYPBPR)oftheDVDplayertotheDVD INPUT VIDEO sockets (Y PB PR) of the set. Connect the audio cable from the DVD player to DVD INPUT AUDIO sockets of the set. 3. Press the TV/AV button to select COMPONENT1 or COMPO- NENT2. 4. DVD/DTV INPUT COMPONENT1 Press the PLAY button on the DVD COMPONENT2 (480i/480p/576i) (R) The DVD (R) (L) (L) PR PR PB PB AUDIO VIDEO LR (L)-AUDIO-(R) player. on the screen. VARIABLE AUDIO OUTPUT MONTOR ANT IN playback picture appears OUTPUT LL Y VIDEO AV2 AV4 Y AV1 Note S-VIDEO MONO : DVD audio input can be output, but DVD video input cannot be output. DVD Player Variable Audio out sockets The phono sockets for a Hi-Fi (AUDIO OUT) amplifier system are on the back of the set; L=left sound channel, R=right sound channel. If you connect an amplifier system, you can also play the TV sound through the stereo amplifier system. TV speaker speakers muted when pressing the MUTE button. DVD/DTV INPUT COMPONENT1 COMPONENT2 (480i/480p/576i) (R) (R) (L) (L) PR PR PB PB Y Y AUDIO VIDEO LR (L)-AUDIO-(R) VARIABLE AUDIO OUTPUT MONTOR ANT IN OUTPUT LL VIDEO AV2 AV4 AV1 MONO Amplifier 30 S-VIDEO and external Connection of external equipment Monitor out sockets Connect the audio/video in sockets of the other TV or DVD/DTV INPUT monitor to COMPONENT1 COMPONENT2 (480i/480p/576i) (R) MONITOR OUTPUT sockets of the set. (R) (L) (L) PR PR PB PB Y Y AUDIO VIDEO LR (L)-AUDIO-(R) VARIABLE MONITOR ANT IN OUTPUT AUDIO OUTPUT LL VIDEO AV2 AV4 AV1 MONO PC 1. Input/Audio in sockets (option) S-VIDEO Second TV Connect the PC cable from the monitor output socket of the PC to the PC INPUT sockets of the set. 2. Connect the audio cable from the PC to the AUDIO sockets of the set. 3. Switch on set can be the PC, and the PC screen appears operated as the PC monitor. the set. The on DVD/DTV INPUT COMPONENT1 COMPONENT2 (480i/480p/576i) PC(VGA) (R) (R) (L) (L) PR PR PB PB Y Y AUDIO VIDEO LR (L)-AUDIO-(R) VARIABLE AUDIO OUTPUT MONITOR ANT IN OUTPUT LL Note a. : VIDEO AV2 AV4 AV1 MONO The cables are not supplied, such as S-VIDEO the PC cable, audio cable etc. b. Set the resolution of PC to VGA 640x480 (60 Hz) video mode to use this set as PC monitor. PERSONAL COMPUTER Displayable MODE Monitor Specification (only) Resolution Horizontal Frequency(KHz) VGA 31.5KHz 640x480 (Synchronization input form : Vertical Frequency(Hz) 60Hz separate) 31 Troubleshooting check list Symptoms No picture, no sound Sound OK, poor picture Picture OK, poor sound Picture blurred Lines or streaks in Poor picture reception on some channels No colour Poor colour Remote control does not work Check these items and try to adjust these The mains plug-(plugged in and switched on) Is the TV switched Try on another channel (weak signal) Check aerial (plugged Check aerial (broken lead?) into TV?) Check aerial Check for local interference Adjust contrast Adjust brightness Adjust colour Adjust volume Check the batteries in remote control Check Audio/Video sockets (VCR only)
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project