CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or reproductive harm. Wash hands after handling. FCC WARNING:This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. • A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user. • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. • Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. MODELS LCV1100R-DN / LCV1100R-DP Important Safety Instructions 1. 2. 3. 4. 5. 6. 7. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC. European Standards Centre: Krijgsman 1, 1186 DM Amstelveen The Netherlands Warning: Do not install this equipment in a confined space such as a bookcase or similar unit. Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. Warning: The product has been dropped or the case is broken, turn off the power and unplug the power cord. (This may cause fire, electric shock, or injury.) only. If the product has no video out or sound, please stop using. Unplug the power cable Warning: immediately and contact the service center. (This may cause fire or electric shock.) Caution: This installation should be made by a qualified service person and should conform to all local codes. Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel Caution: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, shall be placed on the apparatus. Caution: Prevent the power cable from being severely bent or having pressure exerted on it by a heavy object. Power Supply This camera must always be operated a DC 12 V. Certified/Listed Adaptor which comply with LPS. Handling of the unit Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or metallic material inside the body. If used with foreign matter inside, the camera is liable to fail or to get cause of fire or electric shock. • Remove dust or dirt on the surface of the lens with a blower. • Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent then wipe dry. • Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides. They may damage the surface finish and/or impair the operation of the camera. They may damage the surface finish and/or impair the operation of the camera. Operating and storage location Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid operating or storing the unit in the following locations. • Extremely hot or cold places (operating temperature -10 °C to 50 °C, however, we recommend that the unit be used within a temperature range of 0 °C to 45 °C) • Damp or dust place • Places exposed to rain • Places subject to strong vibration • Close to generators of powerful electromagnetic radiation such as radio or TV transmitters. Signal System NTSC PAL Total / Effective Pixels No. 520,000 / 480,000PIXELS 610,000 / 570,000PIXELS Imaging Sensor 1/3" 960H Interline Color CCD ( Super HAD II ) Horizontal Resolution 650TVL @ Color, 700TVL @ B/W Image Signal Processor E.Effio-E Lens Type 3.6mm Minimum Illumination (30 IRE) Color : 0.1Lux, B/W : 0 Lux (IR LED ON) Day & Night AUTO(Photo Sensor) Sync. System Internal Scanning Frequency (H/V) 15.734 KHz / 59.94 Hz 15.625 KHz / 50 Hz S/N Ratio 50dB Video Output Signal 1Vp-p Composite (75 Ω) IR LED 24EA IR OPTIMIZER AUTO Exposure ELC Auto Gain Control AUTO Electronic Shutter Speed Auto (1/60 ~ 1/100,000) Auto (1/50 ~ 1/100,000) White Balance Auto (1,800 ºK ~ 10,500 ºK) DC 12V, 290mA (3.5W) Power Source Operating Temperature/Humidity -10˚C ~ 50˚C / 0% ~ 80%RH Storage Temperature/Humidity -20˚C ~ 60˚C / 0% ~ 85%RH Dimension Weight Ø 98 x 70 (mm) 430 g 1 2 NOTE : The top cover may turn round a little to fix it with hexagonal bolts at sides. CONNECTION & ADJUSTMENT 1.Power connection - DC12V 2.Video connection power input POWER INPUTDC12V video output VIDEO OUTPUT 3. Adjust the Pan/Tilt/Rotate position of the camera. TILTING PANNING ROTATING 4. Focus : The lens is focused far from 1m. NOTE : We recommend the lens focus as is. WARNINGS & CAUTIONS The information is provided to ensure your safety and to prevent any losses, financial or otherwise. Please read it carefully and use the product accordingly. * For product inquires, please contact the retail shop where you bought the camera. The use of equipment such as an aerial ladder while providing after sales service shall be at your expense. NOTES * Please make sure the product is installed appropriate places where secured from flood, such as under the eaves, to operate properly. * This product is certified as IP66 standard. However, if there is any flood concerns, you shall ask the service center if it would be OK to install where you want.