LG LRD5080N-NH, LRD5160N-NH User guide
CAUTION Disposal of your old appliance RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. 1. This crossed-out wheeled bin symbol indicates that waste electrical and electronic products (WEEE) should be disposed of separately from the municipal waste stream. 2. Old electrical products can contain hazardous substances so correct disposal of your old appliance will help prevent potential negative consequences for the environment and human health. Your old appliance may contain reusable parts that could be used to repair other products, and other valuable materials that can be recycled to conserve limited resources. SIMPLE MANUAL Digital Video Recorder 3. You can take your appliance either to the shop where you purchased the product, or contact your local government waste office for details of your nearest authorised WEEE collection point. For the most up to date information for your country please see www.lg.com/global/recycling An extended Owner’s Manual that contains information on the advanced features is located on the CD-ROM provided in an electronic version. To read these files, you will need to use a Personal Computer (PC) equipped with a CD-ROM drive. Disposal of waste batteries/accumulators The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product. FCC WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. REGULATORY INFORMATION: FCC Part 15 This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. • A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this product in the end user. • Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. • Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces or shall be provided with brushings. This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. Warning: Do not install this equipment in a confined space such as a bookcase or similar unit. Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70. Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture. 1. This symbol may be combined with chemical symbols for mercury (Hg), cadmium (Cd) or lead (Pb) if the battery contains more than 0.0005% of mercury, 0.002% of cadmium or 0.004% of lead. 2. All batteries/accumulators should be disposed separately from the municipal waste stream via designated collection facilities appointed by the government or the local authorities. Pb 3. The correct disposal of your old batteries/accumulators will help to prevent potential negative consequences for the environment, animal and human health. 4. For more detailed information about disposal of your old batteries/ accumulators, please contact your city office, waste disposal service or the shop where you purchased the product. (http://www.lg.com/global/sustainability/environment/takeback-recycling/global-network-europe) Model LRD5160 (16 Channel) is used for the description, operation and details provided in this operating guide. Note: It is strongly recommended that you change the password of the administrator for the protection of the security of personal information. Do not leave 000000 as the default password. Make sure that you keep your password and write it down in a safe place so that you do not forget it. Basic Connection Overview Connect the coaxial-type cameras Connect the Monitor, DVR, VCR, or others. Safety way to remove the battery or the battery from the equipment: Connect ATM/POS unit. Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points. Do not dispose of batteries or battery together with other waste. It is recommended that you use local, free reimbursement systems batteries and accumulators. The battery shall not be exposed to excessive heat such as sunshine, fire or the like. Removal of waste batteries and accumulators (Product with embedded battery ONLY) LRD5160 Series LRD5080 Series Connect the alarm (relay). VIDEO INPUT In case this product contains a battery incorporated within the product which cannot be readily removed by end-users, LG recommends that only qualified professionals remove the battery, either for replacement or for recycling at the end of this product’s working life. To prevent damage to the product, and for their own safety, users should not attempt to remove the battery and should contact LG Service Helpline, or other independent service providers for advice. 100 - 240 V ~ 50 / 60 Hz LOOP OUT CAUTION: Internal lithium battery in the unit should not be replaced by user because of danger of explosion if battery is incorrectly replaced ,and must be replaced with the same type battery by expert. Replacement of battery Caution: This installation should be made by a qualified service person and should conform to all local codes. Connect PTZ cameras, DVRs or keypads (optional). Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. Caution: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the apparatus. Caution: This product employs a Laser System. To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service center. Use of controls, adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must remain readily accessible. LG Electronics hereby declares that this/these product(s) is/are in compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2011/65/EU. Contact office for compliance of this product : LG Electronics Inc. EU Representative, Krijgsman 1, 1186 DM Amstelveen, The Netherlands • Please note that this is NOT a Customer Service contact point. For Customer Service Information, see Warranty Card or contact the dealer that you purchased this product. Connect power cord. Символ «не для пищевой продукции» применяется в соответствие с техническим регламентом Таможенного союза «О безопасности упаковки» 005/2011 и указывает на то, что упаковка данного продукта не предназначена для повторного использования и подлежит утилизации. Упаковку данного продукта запрещается использовать для хранения пищевой продукции. Символ Кедендік одақтың 005/2011 техникалық регламентіне сәйкес қолданылады және осы өнімнің қаптамасын екінші рет пайдалануға арналмағанын және жоюға жататынын көрсетеді. Осы өнімнің қаптамасын азық-түлік өнімдерін сақтау үшін пайдалануға тыйым салынады. Символ «петля Мебиуса» указывает на возможность утилизации упаковки. Символ может быть дополнен обозначением материала упаковки в виде цифрового и/или буквенного обозначения. Символ қаптаманы жою мүмкіндігін көрсетеді. Символ сандық код және/немесе әріп белгілері түріндегі қаптама материалының белгісімен толықтырылуы мүмкін. Connect the external SATA device. Connect an external USB device for backup or playback. Connect alarm sensors. Connect a mouse device. Connect network cable for client control. Connect audio amplifier. Connect audio (line input). Connect HDMI type mon4itor (MAIN). Connect BNC type monitor (SPOT). Connect VGA monitor. Российская Федерация Импортер ООО “ЛГ Электроникс Рус” Адрес импортера: 143160 Российская Федерация, Московская область, Рузский район, сельское поселение Дороховское, 86 км. Минского шоссе, д.9 Адрес производителя: ЛГ ЭЛЕКТРОНИКС (ХУЖОУ) ИНК., ЗАВОД ХАТАИ ЛГ Электроникс (Хужоу) Инк., завод Хатаи 516006, Китай, пров. ГуанДонг, г. Хужоу, Промышленная зона Жонгкай, Индустриальный парк Хутаи, ХуФенг Донг Уи Роуд, 13. Сделано в Китае *MFL69441507* 1512 (V6.0) Front Panel and Remote Control Front Panel Setup Wizard Remote Control The Setup Wizard appears on the screen when you turn on the unit for the first time or select [Setup Wizard] on the Setup menu. You can set the system name, display language, date, time, network settings, recording schedule and recording mode on the initial setup wizard. Description OSD PTZ FOCUS+ IRIS+ 1 2 3 4 INFO ALM.OFF FOCUS - IRIS - 5 6 7 Turns DVR on or off. Press and hold for more than 2 seconds to turn on or off. OSDTEXT OFF LOG 9 Pauses playback. COPY MARK INFO 14 13 FOCUS+ CLEAR 11 2 12 MOVE TOUR ALM.OFF 15 5 OSD 8 PTZ SET 10/0 1 6 LOG PTZ 4 8 SET IRIS+ 1 2 3 INFO ALM.OFF COPY 13 6FOCUS+ FOCUS MARK 14 7 IRIS+ TEXT OFF 3 SET Set system name and display language. IRIS - 7 FOCUS+ TEXT OFF Step 1 OK IRIS+ 3 FOCUS 16 CLEAR LOGIN 4 OK SEARCH SETUP VIEW CAM BACK REC 9 10/0 11 12 Searches the recorded images in reverse or skips the recorded images. 5 PTZ OSD 1 2 LOG MOVEIRIS - 4 16 OK CLEAR 10/0 playback 11 12 Playback or9 reverse of recorded images. INFO ALM.OFF 5 OSD 1 LOG LOG 2 FOCUS+ FOCUS+ IRIS+ 1 2 3 4 ALM.OFF FOCUS - IRIS+ INFO 3 5 FOCUS - 9 IRIS 4 6 LOG TEXT OFF 8 CLEAR 11 12 7 COPY MARK MOVE TOUR 13 14 15 16 SET CLEAR 11 12 MOVE TOUR 15 16 8 1 OSD 1 FOCUS+ IRIS+ 3 4 LOGIN ALM.OFF SEARCH FOCUSSETUP FOCUS+ IRIS+ 6 7 LOG 2 3 FOCUS+ TEXT OFF 3 FOCUS+ ALM.OFF 9 ALM.OFF LOG ALM.OFF 6 9FOCUS+ 3 4 IRIS+ SET CLEAR 12 8 IRIS - 8 4 MOVE TOUR CLEAR 15 16 8 15 3 6 TEXT OFF COPY FOCUS TEXT13 OFF 10/0 - SETUP VIEW 16 TOUR 0 12 MARK MOVE TOUR 16 3 12 BACK REC LOGIN 4 8 SET CLEAR SEARCH SETUP VIEW OK SETUP VIEW CAM OK CAM OSDBACK CAM LOGIN LOGIN SEARCH LOGIN PTZ FOCUS+ IRIS+ 1 2 3 4 INFO ALM.OFF LOG PTZ FOCUS+ TEXT OFF 2 9 PTZ REC 1 LOG INFO LOGIN SEARCH FOCUS SET IRIS+ 3 0 BACK REC SEARCH BACK REC SETUP IRIS - SEARCH SETUP SETUP VIEW VIEW VIEW CAM CAM CAM BACK BACK BACK REC REC Step 2 Set date and time. REC CLEAR 4 ALM.OFF COPY FOCUS+ FOCUS MARK IRIS+ TEXT OFF 3 SET 2 ALM.OFF 5 OSD 1 LOG FOCUS - MOVEIRIS - 4 TOUR OK CLEAR COPY 6 PTZ MARK 7 FOCUS+ TEXT OFF SET IRIS - MOVE 8 IRIS+ ALM.OFF COPY 6FOCUS+ FOCUS MARK 7 IRIS+ LOGIN TOUR IRIS - TOUR LOGIN Adjust iris position. CAM Displays the system information. BACK SEARCH SETUP VIEW VIEW CAM CAM BACK REC OK CLEAR 2 focus position. 3 OK 4 Adjusts 0 9 OK INFO COPY BACK SEARCH OK SETUP BACK REC REC LOGIN SEARCH SETUP VIEW CAM BACK REC OK REC REC Cancels alarm activation and returns the system to the condition before the alarm was activated. LOGIN Displays the System Log List. - SEARCH SETUP VIEW LOGIN SEARCH SETUP CAM BACK REC VIEW CAM CAM BACK BACK REC Displays or disappears the text information if the recording data includes text data. OSD RIS+ SET 8 CLEAR 1 4 11 2 12 CLEAR TOUR INFO 12 16 PTZ 2 4 5 3 8 TOUR 6 8 2 7 LOGIN LOG 16SEARCH EAR 10/0 11 12 ALM.OFF 9 MOVE RIS15- PTZ FOCUS+ IRIS+ ALM.OFF FOCUS - IRIS - TEXT OFF SET CLEAR MARK MOVE TOUR 14 15 16 12 6 16 2 FOCUS - 0 MARK 7 SET PTZ 5 2 7 LOGIN SEARCH LOG IRIS+ 3 4 IRIS+ FOCUS - 7 IRIS - REC VIEW ALM.OFF TOUR FOCUS+ OK 6 SETUP SEARCH BACK 3 IRIS - IRIS+ 7OK MARK SETUP 4 SET 8 OK 6 SEARCH 7 SETUP IRIS VIEW IRIS+ 3 4 REC SET IRIS - VIEW MOVE VIEW CLEAR BACK CAM CAM TOUR SEARCH MARK OK SEARCH SETUP IRIS+ SETUP VIEW LOGIN SEARCH CAM BACK SETUP REC VIEW LOGINTOUR SEARCH SETUP BACK REC BACK MOVE VIEW TOUR CAM BACK CAM BACK REC CAM SETUP RIS+ 4 8 VIEW LOGIN LOGIN RIS - VIEW SEARCH 8 TOUR BACK REC Gateway: Enter the gateway address. Moves the camera to the preset position. Tours all registered preset positions in the camera. Primary DNS: Enter the Primary domain name server that translates the hostnames into IP address. • Secondary DNS : Enter the Secondary DNS server address that backups the Primary DNS. Zooms in/out onOKplayback window. Step 4 BACK REC BACK REC OUR OSD LOGIN OK SEARCH 1 INFO 5 LOGIN LOGIN OK SEARCH OK SEARCH SETUP LOG 9 SETUP PTZ SETUP 2 ALM.OFF 6 TEXT OFF 10/0 VIEW FOCUS - 7 SET 11CAM IRIS - - 8 CLEAR 12BACK MOVE TOUR 14 15 16 CAM BACK REC CAM BACK OK SEARCH SETUP VIEW CAM - BACK REC SETUP VIEW CAM BACK OSD REC BACK REC CAM BACK BACK REC LOGIN SEARCH REC SETUP BACK BACK REC VIEW BACK BACK REC REC REC REC CAM BACK REC • Select or move between the menu options. wsad: OK • OK: Confirms menu selections. SEARCH SETUP VIEW LOGIN SEARCH SETUP SEARCH REC SETUP CAM BACK VIEW VIEW CAM OK REC CAM BACK BACK REC REC SETUP VIEW CAM BACK OK PTZ VIEW CAM BACK OK LOGIN SEARCH SEARCH SETUP SETUP VIEW VIEW CAM CAM BACK BACK 2 3 4 ALM.OFF FOCUS - IRIS - 5 6 7 8 SET CLEAR MOVE TOUR TEXT OFF 0 COPY MARK • Weekend: Sets the recording mode to weekend (Sat-Sun). REC SETUP VIEW CAM BACK REC Displays the Monitor menu to set the first camera channel. VIEW CAM BACK REC Exits the menu or returns to the previous screen. • • • • NET: Blinks when the network is connected. HDD: Lights when the HDD is accessed. ALARM: Lights when the alarm out is in progress. BACK UP: Lights when the data back up is in progress. BACK REC OK REC LOGIN SEARCH SETUP VIEW IRIS+ 1 9 Weekday: Sets the recording mode to weekday (Mon-Fri). REC CAM BACK REC Set the appropriate DVR system ID to operate via the IR Remote Controller when using the multiple DVR. Press the ID button then press the number button within 2 seconds to select the system ID of the DVR. If you set the system ID to “0”, you can control multiple DVR at the same time. INFO LOG • REC Displays the setup menu. REC FOCUS+ Set recording schedule. REC To select the PTZ preset number, ID or channel. VIEW CAM 4CAM MARK SETUP VIEW IRIS+ 3VIEW 13 OK SEARCH LOGIN FOCUS+ COPY VIEW VIEW CAM CAM CAM Starts or stops instant recording. OK LEAR Set network address for LAN ports. • SEARCH SETUP OK CAM Step 3 Displays the split mode menu for MAIN Monitor and SPOT Monitor. REC CLEAR Daylight Saving End: Select the Daylight Saving end time. • LOGIN REC 4 IRIS - Daylight Saving Start: Select the Daylight Saving start time. • Subnet Mask: Enter the subnet mask address. OK REC BACK • Displays the search menu. 0 LOGIN Daylight Saving: Mark up when you use the daylight saving function. Sets the mark point for recording search. CAM Displays the User Log-In dialog box or logs out. REC 8 MOVE VIEW CLEAR Time Zone: Select the time zone in the area where the DVR is installed. • IP Address: Enter the IP address. LOGINTOUR SEARCH BACK REC OK CAM • • LOGIN BACK CLEAR 8 MOVE CAM CLEAR Time Format: Select the time display format. • OK 8 Date Format: Select the date display format. • DHCP: Select this option when a DHCP server is installed on the network to allow IP address assignment. With this setting, the IP address is assigned automatically. LOGIN IRIS - CAM 4 TEXT OFF FOCUS 0 - FOCUS 0 - LOGIN TOUR FOCUS+ FOCUS IRIS+ 7 VIEW REC LOG FOCUS 0 - OKBACK 2 ALM.OFF 9 COPY TOUR OK MARKSETUP LOGIN SEARCH TEXT OFF SET MOVE 8 MOVE PTZ CAM CLEAR IRIS+ 7 MARK SETUP 4 SET TOUR 8 CAM 6 FOCUS+ 6 COPY OK LOGIN 3 SEARCH TEXT OFF IRIS MOVE VIEW CLEAR COPY OK SEARCH 3 TEXT OFF CLEAR ALM.OFF 9 CLEAR INFO 8 MOVE PTZ 5 CLEAR LOGIN LOG ALM.OFF 9 TOUR FOCUS+ 8 4 SET SETUP 2 2 LOGIN FOCUS+ INFO 6 TEXT OFF 3 INFO MOVE PTZ 5 1 PTZ 3 IRIS - 1 0 FOCUS+ ALM.OFF SET FOCUS 0 IRIS+ 7 MARK OSD 4 SETUP SEARCH CAM OK BACK SET 1 IRIS - MARK OSD SET MARK OSD OK 4 TEXT OFF SETUP LOGIN TEXT OFF VIEW FOCUS 0 - COPY TEXT OFF OUR 3 LOG ALM.OFF 9 FOCUS+ 6 COPY Time: Select the current time. • • MOVE LOGIN LOGINSEARCH TOUR SEARCHSETUP SETUP VIEW OK IRIS+ 7 8 MARK MOVE TOUR MARK FOCUS+ 6 COPY • Interface: Select a LAN port you want to use (Ethernet 0). REC Displays the export menu. COPY PTZ 5 OK Date: Select the current year, month and day. • BACK Deletes a memorized preset position. 8 • REC Registers the PTZ camera’s preset position. 7 Language: Select a language for the setup menu and information display. TOUR 0 9 Switches this unit to PTZOKmode to control the connected PTZ camera. 13 • REC OK 16 MOVE OSD 1 INFO COPY BACK IRIS - 7 Accesses or5 minimizes the7 System8 Control Bar (OSD). 6 OK CAM OK IRIS+ CLEARFOCUS - 6 TEXT OFF 11 TOUR FOCUS+ 0 - 10/0 FOCUS MOVE SET IRIS 99 TEXT OFF 11 CLEAR 12 MOVE TOUR 5 PTZ 8 OSD FOCUS -MARK 7 MARK IRIS 10/0IRIS+ 11- 8 MOVE 12 TOUR OK 3 OSD PTZ FOCUS+ 1 IRIS+ 7 4 8 LOG 2 TEXT OFF SET 4 SETUP CLEAR VIEW LOGIN SEARCH CLEAR MARKSET 14 MOVE 15 TOUR 16 OK 1 2 3 4 0FOCUS M.OFF IRIS ALM.OFF IRIS LOGIN SEARCH INFO SETUP VIEW 9 CAM BACK REC SET CLEAR 9 11 12 14 15 16 INFO ALM.OFF FOCUS 6 5 IRIS 10/0 7 11 8 12 COPY 6 MARK 7 MOVE 8 TOUR COPY MARK MOVE TOUR OK OSD PTZ FOCUS+ IRIS+ 5 6 7 8 LOGIN SEARCH SET SETUP VIEW CAM XT13 OFF CLEAR LOG IRIS+ TEXT OFF CLEAR MARKSET MOVE OSD TOUR 16 PTZ FOCUS+ 14 15 OK 1 2 3 4 LOGIN SEARCH SETUP VIEW CAM BACK LOG TEXT OFF SET 0 10/0 9 CLEAR 14 11 15 12 16 1 2 3 4 ALM.OFF FOCUS IRIS INFO 9 10/0 11 12 FOCUS+ IRIS+ MARK MOVE TOUR INFO COPY IRIS MARK MOVE TOUR ALM.OFF FOCUS 5 6 7 8 3 4 LOGIN SEARCH SETUP VIEW CAM BACK REC MARK MOVE TOUR 14 15 16 COPY OSD PTZ FOCUS+ IRIS+ OK 5 6 7 8 LOGIN SEARCH16 SETUP VIEW CAM BACK REC LOG TEXT13 OFF SET CLEAR OK 14 15 FOCUS IRIS 1 2 3 4 LOG TEXT OFF SET CLEAR 98 10/0 11 12 7 INFO ALM.OFF FOCUS IRIS 9 10/0 11 12 LOGIN SEARCH SETUP OK VIEW CAM BACK REC COPY MARK MOVE TOUR OSD PTZ FOCUS+ IRIS+ SET CLEAR 5 6 7 8 COPY MARK MOVE TOUR LOGIN SEARCH OKSETUP VIEW 13 14 15 16 1 2 3 4 LOG TEXT13 OFF SET CLEAR 14 15 16 INFO ALM.OFF FOCUS IRIS MOVE TOUR 10/0 1112 9 PTZ FOCUS+ IRIS+ 5 6 7 8 COPY MARK MOVE TOUR LOGIN SEARCH OK SETUP VIEW CAM OSD PTZ FOCUS+ IRIS+ OSD PTZ FOCUS+ IRIS+ 2 3 4 LOGIN SEARCH SETUP VIEW LOG TEXT13 OFF SET CLEAR 1 2 3 114 215 316 44 ALM.OFF FOCUS IRIS 11 12 9 10/0 INFO ALM.OFF FOCUS-IRIS-INFO ALM.OFF IRIS LOGIN SEARCH FOCUSSETUP VIEW CAM BACK REC 6 7 8 COPY MARK MOVE TOUR OSD PTZ FOCUS+ IRIS+ OSD PTZ FOCUS+ IRIS+ OK 55 66 77 88 LOGIN SEARCH SETUP VIEW CAM OK TEXT13 OFF OSD SET CLEAR PTZ 14 15 16 OK 11 22 FOCUS+ TEXT 33OFF IRIS+ 44 LOG SET CLEAR LOG TEXT OFF SET CLEAR 12 10/0 11 1 2 3 INFO ALM.OFF FOCUS - 4 IRIS -INFO ALM.OFF FOCUS IRIS 0 9 9 10/0 11 12 TOUR OSD MARK FOCUS+ IRIS+ INFOPTZ MOVE ALM.OFF FOCUS IRIS OSD PTZ FOCUS+ IRIS+ 55 66 77 88 COPY MARK MOVE TOUR SEARCH LOGINTOUR SETUP VIEW CAM OK REC COPY MARK MOVE OK BACK 14 15 PTZ 1 5 2 6 3 TEXT16 7 4 8 1 2 FOCUS+ 3OFF IRIS+ 4 LOG SET CLEAR LOG TEXT13 OFF SET CLEAR OK 14 15 16 2 3 4 INFO INFO LOG ALM.OFF FOCUS FOCUS - 10/0 0 - SET IRIS - IRIS ALM.OFF 99 TEXT OFF 11 - CLEAR 12 OPTZ -7 IRIS - 8 PTZ IRIS+ 5 6 FOCUS+ 0 IRIS+ 9FOCUS+ 5 ALM.OFF 6 FOCUS 7 8 COPY MARK MOVE TOUR SEARCH COPY MARK MOVE TOUR LOGIN SETUP VIEW CAM OK BACK REC OK OSD PTZ FOCUS+ IRIS+ 2 6 3 7 4 8 2 3 4 LOGIN SEARCH SETUP VIEW LOG LOG TEXT OFF CLEAR CLEAR COPY MOVE TOUR TEXT13 OFF MARKSET SET SEARCH SETUP VIEW 14 15 16 OK LOGIN 1 2 3 4 M.OFF FOCUS -FOCUS - SET IRIS - IRIS - CLEAR TEXT OFF 0 9 ALM.OFF 9 10/0 11 12 INFO ALM.OFF FOCUS IRIS 6 8 0 7 6 7 8 COPY COPY MARK MARK MOVE MOVE TOUR TOUR OK OSD PTZ FOCUS+ IRIS+ OK 5 6 7 8 LOGIN SEARCH SETUP VIEW CAM CLEAR CLEAR LOGIN SEARCH SETUP VIEW CAM YXT OFF MOVE TOUR TEXT13 OFF MARKSET SET OSD PTZ FOCUS+ IRIS+ OK 15 16 14 1 2 3 4 LOGIN SEARCH SETUP VIEW CAM BACK LOG TEXT OFF SET CLEAR 0 1 2 3 4 10/0 11 12 INFO ALM.OFF FOCUS IRIS 0 9 MARK MARK MOVE MOVE TOUR TOUR INFO ALM.OFF FOCUS IRIS 5 6 7 8 LOGIN LOGINSEARCH COPY MARK MOVE TOUR SEARCHSETUP SETUP VIEW VIEW CAM CAM BACK OSD PTZ FOCUS+ IRIS+ OK BACK REC REC 16 14 IRIS+ 15 5 6 7 8 LOGIN SEARCH SETUP VIEW CAM BACK REC LOG TEXT OFF SET CLEAR FOCUS+ IRIS+ OK 1 2 3 4 44 LOG TEXT OFF SET CLEAR 3 0 9 FOCUS IRIS INFO ALM.OFF FOCUS IRIS IRIS 0 9 2 LOG SEARCH 5 6 7 8 If you use the Sub-function of the channel button, the button is activated. OK 8 IRIS 11 - IRIS - 15CLEARMARK 10/0 CAM VIEW IRIS - 4 IRIS+ FOCUS 10/0 4 3 MOVE 8 OSD 2 2 PTZ - VIEW PTZ FOCUS+ FOCUS 5INFO ALM.OFF 6 FOCUS ALM.OFF - IRIS+ IRIS 7 COPY MARK 5 FOCUS+ 6 7 8 6 3 TEXT OFF IRIS+ 7 4 LOG SET 13 SET 14 LOG TEXT OFF CLEAR 2 INFO OPTZ 5 2 OSD INFO 1 INFOPTZ PTZ 5 2 SETUP 1 PTZ 5 PTZ SEARCH LOGIN You can input a number with channel buttons. 14 16 Note: You15 can also use the channel buttons for sub-function with SHIFT button. OK 13 OSD INFO 1 COPY 9 COPY OK LOGIN OSD OSD - TOUR 15CLEAR 4 MOVE 2 11 IRIS - LOG 14 SET PTZ 4 ALM.OFF SET 5 MARK 7 13 TEXT OFF IRIS - 7 SET 10/0 FOCUS - COPY 6 LOG 9 10/0 1 INFO Stops playback. 5 PTZ MOVE 8 IRIS+ 14 SET 3 FOCUS MARK OSD 7 IRIS+ 14 TEXT OFF 3 9ALM.OFF INFO OSD 2 IRIS - MARK 7 FOCUS+ 13 TEXT OFF ALM.OFF COPY 6FOCUS+ 13 5 PTZ 1 COPY 6 PTZ System Name: Enter the system name by using alphabetic letter, numeric digit and symbols up to 21 characters. 9 10/0 11 12 Forward searches the recorded images or skips the recorded images. INFO OSD FOCUS - • TOUR 8 15 OK Step 5 Set recording mode for the Continuous and Event recording. • Resolution: Selects the recording resolution. • Quality: Selects the recording picture quality. • Frame Rate: Selects the frame rate. The frame rate is the number of recorded frames per second. According to resolution, the frame rate is set automatically.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project