LG LRH7160D-NH, LRH7080D-NH User guide

LG LRH7160D-NH, LRH7080D-NH User guide
CAUTION
Disposal of your old appliance
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
1.
This crossed-out wheeled bin symbol indicates that waste electrical and
electronic products (WEEE) should be disposed of separately from the
municipal waste stream.
2.
Old electrical products can contain hazardous substances so correct
disposal of your old appliance will help prevent potential negative
consequences for the environment and human health. Your old
appliance may contain reusable parts that could be used to repair other
products, and other valuable materials that can be recycled to conserve
limited resources.
3.
You can take your appliance either to the shop where you purchased
the product, or contact your local government waste office for details of
your nearest authorised WEEE collection point. For the most up to date
information for your country please see www.lg.com/global/recycling
Disposal of waste batteries/accumulators
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
Pb
1.
This symbol may be combined with chemical
symbols for mercury (Hg), cadmium (Cd) or lead
(Pb) if the battery contains more than 0.0005% of
mercury, 0.002% of cadmium or 0.004% of lead.
2.
All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
3.
The correct disposal of your old batteries/accumulators will help to prevent potential
negative consequences for the environment, animal and human health.
4.
For more detailed information about disposal of your old batteries/ accumulators,
please contact your city office, waste disposal service or the shop where you
purchased the product. (http://www.lg.com/global/sustainability/environment/takeback-recycling/global-network-europe)
Safety way to remove the battery or the battery from the equipment:
•
A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of
this product in the end user.
Remove the old battery or battery pack, follow the steps in reverse order than the assembly.
To prevent contamination of the environment and bring on possible threat to human and
animal health, the old battery or the battery put it in the appropriate container at designated
collection points. Do not dispose of batteries or battery together with other waste. It is
recommended that you use local, free reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
Removal of waste batteries and accumulators
(Product with embedded battery ONLY)
•
Holes in metal, through which insulated wires pass, shall have smooth well rounded
surfaces or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA
70.
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or
moisture.
Caution: This installation should be made by a qualified service person and should conform
to all local codes.
SIMPLE MANUAL
Hybrid Digital Video Recorder
An extended Owner’s Manual that contains information on the advanced features is located on the CD-ROM provided in an electronic version. To read
these files, you will need to use a Personal Computer (PC) equipped with a CD-ROM drive.
Model LRH7160D (16 Channel) is used for the description, operation and details provided in this operating guide.
Note: It is strongly recommended that you change the password of the administrator for the protection of the security of personal information. Do not
leave 000000 as the default password. Make sure that you keep your password and write it down in a safe place so that you do not forget it.
Basic Connection Overview
Connect the Monitor, DVR, VCR, or others.
Connect the coaxial-type
cameras
Connect power cord.
In case this product contains a battery incorporated within the product which cannot be
readily removed by end-users, LG recommends that only qualified professionals remove the
battery, either for replacement or for recycling at the end of this product’s working life. To
prevent damage to the product, and for their own safety, users should not attempt to remove
the battery and should contact LG Service Helpline, or other independent service providers for
advice.
CAUTION: Internal lithium battery in the unit should not be replaced by user because of
danger of explosion if battery is incorrectly replaced ,and must be replaced with the same
type battery by expert.
Connect audio amplifier.
Replacement of battery
Connect PTZ cameras, DVRs or keypads
(optional).
Connect audio (line input).
Connect the external SATA device.
Caution: The apparatus should not be exposed to water (dripping or splashing) and no
objects filled with liquids, such as vases, should be placed on the apparatus.
This product employs a Laser System. To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future reference. Should the unit require
maintenance, contact an authorized service center. Use of controls, adjustments, or the
performance of procedures other than those specified herein may result in hazardous
radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
Connect the alarm (relay)
Connect ATM/POS unit.
Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified
personnel only.
Caution:
LRH7160D Series
LRH7080D Series
Connect alarm sensors.
Connect an external USB device for
backup or playback.
Connect VGA monitor.
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must
remain readily accessible.
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant
provisions of Directive 2004/108/EC, 2006/95/EC, and 2011/65/EU.
Connect a mouse device.
Connect BNC type monitor (SPOT).
Contact office for compliance of this product :
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
•
Please note that this is NOT a Customer Service contact point. For Customer Service
Information, see Warranty Card or contact the dealer that you purchased this product.
Connect HDMI type monitor (MAIN or SPOT).
*MFL69441508*
Connect network cable for client control
or IP camera input.
1512 (V6.0)
Front Panel and Remote Control
Front
Panel
Remote
Control
NET
HDD
OSD
PTZ
FOCUS+
IRIS+
1
2
3
4
INFO
NET
ALM.OFF
OSD
5
FOCUS -
The Setup Wizard appears on the screen when you turn on the unit for the first time or select [Setup Wizard] on the Setup menu. You can set the
system name, display language, date, time, network settings, recording schedule and recording mode on the initial setup wizard.
Description
IRIS -
PTZ
6
Setup Wizard
FOCUS+
7
8
SET
CLEAR
IRIS+
1
2
4
Turns DVR on or
off. Press
and3 hold for
more than 2 seconds to turn on or off.
ALARM
LOG
TEXT OFF
9
HDD
BACK UP
INFO 10/0
COPY
NET
MARK
5
OSD 13
11
ALM.OFF
MOVE
ALARM
HDD
NET
FOCUS+
15
HDD
ALARM
INFO
2
9
5
9
NET
OSD
PTZ
1
IRIS+
FOCUS+
3
HDD
FOCUS -
ALARM
7
2
3
ALM.OFF
FOCUS -
6
7
8
LOG
TEXT OFF
SET
CLEAR
9
10/0
11
12
MOVE
TOUR
15
16
IRIS -
8COPY
MARK
13
14
SET
CLEAR
11
12
MOVE
TOUR
15
16
ET
OSD
SET
11
7
4
TOUR
15
16
CLEAR
IRIS -
SEARCH
VIEW
SET
IRIS -
MARK
13
14
SHIFT
10/0
11
7
CLEAR
MARK
SET
MOVE
16
PTZ
FOCUS+
IRIS+
1
2
3
4
INFO
PTZ
ALM.OFF
FOCUS+
FOCUS SEARCH
IRIS+
CAM
BACK
VIEW
SEARCH
CAM
SHIFT
BACK
REC
SETUP
LOG-IN
VIEW
CAM
BACK
REC
SETUP
VIEW
CAM
BACK
REC
SETUP
VIEW
CAM
BACK
Step 2
Accesses or minimizes the System Control Bar (OSD).
Set date and time.
REC
CAM
BACK
OSD
PTZ
2
FOCUS+
REC
IRIS+
3
4
•
Date: Select the current year, month and day.
•
Time: Select the current time.
•
Date Format: Select the date display format.
•
Time Format: Select the time display format.
Displays the system information.
•
Time Zone: Select the time zone in the area where the DVR is installed.
Cancels alarm activation and returns the system to the condition before the alarm was activated.
•
Daylight Saving: Mark up when you use the daylight saving function.
Displays the System Log List.
•
Daylight Saving Start: Select the Daylight Saving start time.
•
Daylight Saving End: Select the Daylight Saving end time.
Switches this unit to PTZ mode to control the connected PTZ camera.
INFO
ALM.OFF
FOCUS -
IRIS -
Adjusts focus position.
Adjust iris position.
REC
VIEW
CAM
BACK
Displays or disappears the text information if the recording data includes text data.
Registers the PTZ camera’s preset position.
Deletes a memorized preset position.
Displays the export menu.
Sets the mark point for recording search.
SEARCH
SEARCH
IRIS+
8
15
4 IRIS
SET
88
TOUR
SHIFT
12
SHIFT
TOUR
16FOCUS+
TOUR3
PTZ
2
4
OSD
IRIS -
7
SET
2
12
SEARCH
SETUP
SEARCH
SETUP
IRIS+
3
REC
CLEAR
SHIFT
LOG-IN
FOCUS+
PTZ
1
8
SHIFT
11
10/0
SEARCH
NET
IRIS+
FOCUS -
16
6
EXT OFF
SEARCH
LOG-IN
SHIFT
CLEAR
CLEAR
12 MOVE
ALM.OFF
Tours all registered preset positions in the camera.
16
CLEAR
IRIS -
4
REC
REC
SETUP
VIEW
CAM
BACK
SEARCH
VIEW
Zooms in/out on playback window.
MOVE
TOUR
LOG-IN
15
NET
14
16
OSD
1
SEARCH
REC
VIEW
CAM
BACK
REC
SETUP
VIEW
CAM
REC
VIEW
CAM
BACK
REC
CAM
VIEW
CAM
BACK
BACK
•
wsad: Select or move between the menu options.
VIEW
CAM
BACK
•
OK: Confirms menu selections.
Displays the User Log-In dialog box or logs out.
Displays the search menu.
REC
BACK
Displays the split mode menu for MAIN Monitor and SPOT Monitor.
PTZ
FOCUS+
IRIS+
FOCUS -
IRIS -
SET
CLEAR
MOVE
TOUR
EXT OFF
Set network address for LAN ports.
•
Interface: Select a LAN port you want to use (Ethernet 0 or Ethernet 1).
•
DHCP: Select this option when a DHCP server is installed on the network to allow IP
address assignment. With this setting, the IP address is assigned automatically.
•
IP Address: Enter the IP address.
•
Subnet Mask: Enter the subnet mask address.
•
Gateway: Enter the gateway address.
•
Primary DNS: Enter the Primary domain name server that translates the hostnames into IP
address.
•
Secondary DNS : Enter the Secondary DNS server address that backups the Primary DNS.
Step 4
Set recording schedule.
Displays the setup menu.
ALM.OFF
Step 3
BACK
REC
SETUP
LOG-IN
BACK
REC
SETUP
REC
HDD
INFO
ALM.OFF
FOCUS IRIS LOG-INVIEW
CAM
BACK
VIEW
CAM
BACK
SEARCH
SETUP
OSD
PTZ
FOCUS+
IRIS+
5 FOCUS+
6
7
8
PTZ
IRIS+
VIEW
CAM
BACK
1
2
3LOG-IN
4
REC
3 SEARCH
ALARM 2
LOG
TEXT OFF 4SETUP SET
CLEAR
HDD
INFO
ALM.OFF
FOCUS IRIS SHIFT
9 FOCUS
0
DD
INFOPTZ
ALM.OFF
IRIS LOG-IN
VIEW
CAM
BACK
OSD
FOCUS+
IRIS+
5 FOCUS+
6
7
8
SD
PTZ
IRIS+
5 2 BACK UP 6 3 COPY
7 4 MARK 8
1
MOVE
TOUR
REC
1
3
ALARM 2
LOG
TEXT OFF 4
SET
CLEAR
SETUP
ARM
LOG
TEXT
OFF SEARCH
SET
CLEAR
INFO
ALM.OFF
FOCUS
IRIS
SHIFT
0
FO
ALM.OFF
IRIS PTZ
FOCUS+ 9 FOCUS
IRIS+
SHIFT
LOG-IN 0 7
VIEW
CAM
BACK
9 6
5
8
NET
OSD
PTZ
FOCUS+
IRIS+
5 2 BACK UP 6 3
7 4 MARK
8
COPY
MOVE
TOUR
KLOG
UP
COPY
MARK
TEXT OFF
SET
CLEAR
1 MOVE
2 TOUR
3
4 REC
OG
TEXT
OFF - SEARCH
SET
LM.OFF
FOCUS
IRIS - SETUPCLEAR
SHIFT
9
0
SEARCH
SETUP
HDD
INFO
ALM.OFFSHIFTCAMFOCUS - BACK
IRIS LOG-IN
VIEW
9 6
0 7
8
NET
OSD
PTZ
FOCUS+
IRIS+
LOG-IN
VIEW
CAM
COPY
MARK NET
MOVE OSD
TOUR PTZ
5
6
7 REC
8
FOCUS+
IRIS+
PY OFF
MARK
MOVE
TOUR
EXT
SET
CLEAR
1SETUP
2
3
4
SEARCH
ALARM
LOG
TEXT
OFF
SET
CLEAR
1
2
3
4
SHIFT
0
REC
OG-IN
VIEW
CAM
BACK IRIS SEARCH
SETUP
HDD
INFO
ALM.OFF
FOCUS SHIFT
9
0
SEARCH
SETUP
HDD
INFO
ALM.OFF
FOCUS IRIS MARK
MOVE
TOUR
LOG-IN
VIEW
CAM
BACK
5
6
7
8
NET
OSD
PTZ
FOCUS+
IRIS+
REC
LOG-IN
VIEW
CAM
BACK
BACK UP
COPY
MARK
MOVE
TOUR
5
6
7
8
ARCH
SETUP
2
3
4
REC
ALARM
LOG
TEXT2OFF
SET
CLEAR
1
3
4
REC
SEARCH
SETUP
VIEW
CAM
BACK
ALARM
LOG
TEXT OFF
SET
CLEAR
6
7
8
SHIFT SEARCH
9
0
SETUP
HDDFOCUS+
INFO
ALM.OFF
FOCUS IRIS Z0
IRIS+
SHIFT
LOG-IN
VIEW
CAM
BACK
9
0
OSD
PTZ
FOCUS+
REC IRIS+
LOG-IN
VIEW
CAM
BACK
COPY
MARK
MOVE
TOUR
5
6
7
8
4
ETUP BACK UP 3
REC
BACK
COPY
MARK
MOVE
TOUR
1
2 UP
3
4
SEARCH
SETUP
VIEW CAMIRIS BACK
ALARM
LOG
TEXT
OFF
SET
CLEAR
OFF
FOCUS
SEARCH
SETUP
INFO
ALM.OFF
FOCUS IRIS SHIFT
LOG-IN
VIEW
CAM
BACK
9
0
7
8
PTZ
FOCUS+
IRIS+
LOG-IN
VIEW
CAM
NET
OSD
PTZ
FOCUS+
IRIS+
5
6
7
8
IRIS+
REC
2 UPSET
3 CLEAR
4
COPY
MARK
MOVE
TOUR
SETUP4BACK
OFF
1
2
3
4
LOGVIEW
TEXT
OFF BACK
SET
CLEAR
CAM
/0 IRISALM.OFF
11
SEARCH
SETUP
FOCUS - 12
IRIS - SHIFT
SHIFT 8
HDD
INFO
ALM.OFF
FOCUS
IRIS 9
0
SEARCH
SETUP
LOG-IN
VIEW
CAM
BACK
6 MOVE
7 TOUR
8
OSD
PTZ
FOCUS+
IRIS+
RK CLEAR NET
5
6
7
8
LOG-IN
VIEW
CAM
COPY SHIFT
MARK
MOVE
TOUR
1
2 NET
3
4
4
16
TEXT OFF 15
SET
CLEAR
OSD
PTZ
FOCUS+
IRIS+
TOUR
ALARM
LOG
TEXT OFF
SET
CLEAR
1 SHIFT
2
3
4
0
HDD
INFO
ALM.OFF
FOCUS IRIS SEARCH
SETUP
SHIFT
9HDD
0
INFO
FOCUS IRIS OSD
PTZ
FOCUS+
IRIS+ ALM.OFF
5
6
7
87
LOG-IN
VIEW
CAM
BACK
5
6
8
MARK
MOVE
TOUR
BACK
COPY
MARK
MOVE
TOUR
1
2 UP
3ALARM
4 TEXT OFF
REC
REC
LOG
SET REC
CLEAR
SETUP
SEARCH
SETUP
ALARMSEARCH
LOG
TEXT OFF
SET
CLEAR
SHIFT
REC
SEARCH
SETUP
9
10/0
11
12
LOG-IN
LOG-INVIEW
CAM
BACK
INFO
ALM.OFF
FOCUS
- BACK VIEW IRIS -CAM
SEARCH
SETUP
SHIFT
COPY
MARK
TOUR
9
0BACK UP
LOG-IN MOVE
VIEW
CAM
BACK
PTZ
FOCUS+
IRIS+
13
14
15
16
5
6
7
8
LOG-IN
VIEW
CAM
BACK
BACK
COPY
MARK
MOVE
TOUR
2 UP
3
4
LOG
TEXT OFF
SET
CLEAR
REC
SEARCH
SETUP
REC
ALM.OFF
FOCUS
IRIS SHIFT
SEARCH
SETUP
9
0 SEARCH
SETUP
LOG-IN
VIEW
CAM
LOG-IN
VIEW
CAM BACKBACK
6
7
8
LOG-IN
VIEW
CAM
COPY
MARK
MOVE
TOUR
TEXT OFF
SET
CLEAR
MARK
ET
VIEW
CAM
SETUP
SETUP
LOG-IN
REC
SETUP
LOG-IN
Moves the camera to the preset position.
7
14
Language: Select a language for the setup menu and information display.
If you use the Sub-function of the channel button, the button is activated.
1
-
•
REC
SETUP
16
HDD
8
System Name: Enter the system name by using alphabetic letter, numeric digit and
symbols up to 21 characters.
TOUR
15
NET
IRIS SETUP
7
4
•
You can input a number with channel buttons.
Note: You can also use the channel buttons for sub-function with SHIFT button.
VIEW
OSD
VIEW
LOG-IN
SEARCH
SETUP
REC
SETUP
TOUR
PTZ
5
6
7
8
VIEW
CAM
BACK
1
ALARM
LOG
TEXT OFF
SET
CLEAR
ALARM 2
SET
CLEAR
SHIFT
INFO
ALM.OFF
FOCUS IRIS 9
0
SHIFT
10/0 IRIS 11
12
DD
INFOPTZ
ALM.OFF
OSD
FOCUS+ 9 FOCUS
IRIS+
BACK
UP
COPY
MARK
MOVE
TOUR
5
6
7
8
SD
PTZ
FOCUS+
IRIS+
5 2 BACK UP 6 3 COPY
7 4 MARK 8
1
MOVE
TOUR
1
3
ALARM 2
LOG
TEXT OFF 4
SET
CLEAR
14 CLEAR
15
16
ARM
LOG
TEXT
OFF - 13
SET
INFO
ALM.OFF
FOCUS
IRIS SHIFT
10/0 IRIS 11
12 SHIFT
FO
ALM.OFF
PTZ
FOCUS+ 9 FOCUS
IRIS+
9 6
10/0 7
11 8
12
5
NET
OSD
PTZ
FOCUS+
IRIS+
5 2 BACK UP 6 3
7 4 MARK
8
SEARCH
SETUP
COPY
MOVE
TOUR
KLOG
UP
COPY
MARK
TEXT OFF
SET
CLEAR
1 MOVE
2 TOUR
3
4
LOG-IN
14 CLEAR
15
16
OG
TEXT
OFF - 13
SET
LM.OFF
FOCUS
IRIS REC
1310/0 HDD 14 11 INFO 15 12 ALM.OFF 16SHIFT FOCUS 9
SEARCH
SETUP
IRIS SHIFT
9 6
10/0
11
12
7
8
NET
OSD
PTZ
FOCUS+
IRIS+
LOG-IN
VIEW
CAM
BACK
COPY
MARK NET
MOVE OSD
TOUR PTZ
5
6
7
8
FOCUS+
IRIS+
PY OFF
MARK
TOUR
EXT
SET
CLEAR
1 MOVE
2
3
4
13
14
15
16
LOG
SET
CLEAR
1
2 OFF
3
4
REC
310/0 HDD
14 11 ALARM
15 12 ALM.OFF
16SHIFTTEXT
NET
OSD
PTZ
FOCUS+
IRIS+
REC
SEARCH
SETUP
INFO
FOCUS IRIS SHIFT
9
10/0
11 12 SEARCH
SETUP 1
HDD
INFO
ALM.OFF
FOCUS
IRIS
2VIEW
3
MARK
MOVE
TOUR
LOG-IN
CAM
BACK4
5
6
7
8
NET
OSD
PTZ
FOCUS+
IRIS+
LOG-IN
VIEW
CAM
BACK
UP
COPY
MARK
MOVE
TOUR
5
6
7
8
14 ALARM
15 BACK
16 TEXT
HDD
INFO
ALM.OFF
FOCUS
IRIS RECLOG
SET
CLEAR
1
2OFF
3
4
13
14OFF
15
16
REC
SEARCH
SETUP
ALARM
LOG
TEXT
SET
CLEAR
5
6
7
8
SHIFT
9OSD
10/0 FOCUS+
11 12 SEARCH NET SETUP
NET
PTZALM.OFF
IRIS+
OSD
PTZ
FOCUS+
IRIS+
HDD
INFO
FOCUS
IRIS
SHIFT
LOG-IN
VIEW
CAM
BACK
9
10/0
11
12
1
2 FOCUS+
3
4
OSD
PTZ
IRIS+
ALARM 1 VIEW
LOG 2CAM
TEXT OFF
SET 4
CLEAR
LOG-IN
BACK
3
BACK UP
COPY
MARK
MOVE
TOUR
5
6
7
8
HDD
INFO
ALM.OFF
FOCUS IRIS REC
SHIFT
BACK
COPY
MARK
MOVE
TOUR
1
2 5 UP
3
4
9
0
6
8
13
14OFF 7
15
16
SEARCH
SETUP HDD
INFO
ALM.OFF
FOCUS IRIS REC
ALARM
LOG
TEXT
SET
CLEAR
14 15
16
ALARM
LOG
TEXT OFF 13
CLEAR
NET
OSD BACK UP PTZ
FOCUS+ MARKSETUP
IRIS+
SEARCH
INFO
ALM.OFF
FOCUS - SET
IRIS
MOVE 8
TOUR
SHIFT
LOG-IN
VIEW
5 CAM COPY 6BACK
7
SHIFT
99
10/0
11
12
0 IRIS+
PTZ
FOCUS+
LOG-IN
VIEW
CAM
BACK
1
2
3
4
NET
OSD
PTZ
FOCUS+
IRIS+
5
6
7
8
BACK UP
COPY
MARK
MOVE
TOUR
ALARM
LOG
TEXT OFF
SET
CLEAR
2 UP
3
4
BACK
COPY
MARK
MOVE
TOUR
1
2
3
4HDD
INFO
ALM.OFF
FOCUS IRIS LOG
TEXT OFF
SET
CLEAR
SHIFTREC
9SEARCH
0
13 14 15
16
SETUP
ALM.OFF
FOCUS
IRIS
REC
SHIFT 5
6
7
HDD
INFO
ALM.OFF
FOCUS
IRIS 9
10/0
11
12
SEARCH
SETUP8
NET
OSD BACK UP
PTZ
IRIS+ VIEW
REC
COPY FOCUS+
MARK
MOVE
LOG-IN
CAMTOUR
BACK
6
7
8
NET
OSD
PTZ
FOCUS+
IRIS+
SEARCH
SETUP
5
6
7
8
ALARM
LOG
TEXT
OFF
SET
CLEAR
LOG-IN
VIEW
CAM
BACK
COPY
MARK
MOVE
TOUR
1
2CAM
3
4
VIEW
BACK
1
2
3
4 LOG-IN
TEXT OFF
SET
CLEAR
SHIFT
9
0
ALARM
LOG
TEXT
SET
CLEAR
13
14
15
16OFF
REC
HDD
INFO
ALM.OFF
FOCUS IRIS SHIFT
10/0
11
12
HDD
INFO
ALM.OFF
FOCUS IRIS SEARCH
SETUP
NET
OSD BACK
9
10/0
11
12 UP PTZ SHIFT
COPY 6FOCUS+ MARK 7 IRIS+
MOVE 8
TOUR
OSD
PTZ
FOCUS+
IRIS+
5
5
6
7
8
LOG-IN
VIEW
CAM
BACK
MARK
MOVE
TOUR
1
2
3
4
BACK
COPY
MARK
MOVE
TOUR
1
2 UP
3
4
ALARM
LOG
TEXT OFF
SET
CLEAR
14
15
16OFF
ALARM
LOG
TEXT
SET
CLEAR
REC
HDD
INFO
ALM.OFF
FOCUS IRIS 13
14
15
16
SHIFT
INFO
ALM.OFF
FOCUS IRIS SEARCH0
SETUP
SHIFT 9
LOG-IN
9
10/0
11
12
5
6
7
8
PTZ
FOCUS+
IRIS+
5
6
7
8
LOG-IN
CAM
BACK
BACK UP
COPY
MARK
MOVE VIEW
TOUR
BACK
COPY
MARK
MOVE
TOUR
2 UP
3
4
ALARM
LOG
TEXT OFF
SET
CLEAR
SEARCH
LOG
TEXT OFF
SET
CLEAR
REC
13
14
15
16
REC
SHIFT
9 SEARCH
0 SETUP
ALM.OFF
FOCUS
IRIS
SHIFT
LOG-IN
9
10/0 11 12
SEARCH
SETUP
LOG-IN
VIEW
CAM
BACK
6
7
8
BACK UP
COPY
MARK
MOVE
LOG-INTOUR
VIEW
CAM
BACK
COPY
MARK
MOVE
TOUR
FOCUS+
IRIS+
TEXT
OFF
SET
CLEAR
13
14
15
16
REC
3
4
SEARCH
SETUP
SHIFT
SEARCH
SETUP
10/0
11
12
IRIS+
LOG-IN
FOCUS IRIS LOG-IN
VIEW
CAM
BACK
MOVE
TOUR
4 MARK
1
HDD
SEARCH
LOG-IN
SEARCH
SHIFT
12
8
MOVE
CLEAR
SEARCH
SEARCH
BACK
TOUR
LOG-IN
-
CAM
TOUR
LOG-IN
5 FOCUS+
6
IRIS+
2
3LOG-IN
3
LOG
TEXT OFF 4
REC
SETUP
LOG-IN
SHIFT
12
8
MOVE
CLEAR
IRIS MOVE 8
Stops14 playback.
15
10/0
11
12
LOG-IN
HDD
OSD
10/0
TEXT OFF
FOCUS -
6
-
SHIFT
IRIS -
MOVE 8
Set system name and display language.
SHIFT
12
3
4
13
14
15
16
Forward
searches
the recorded
images or skips the recorded images.
COPY
4
IRIS -
SHIFT
NET
NET
BACK UP
IRIS+
INFO
45
BACK UP
FOCUS+
TEXT OFF
FOCUS -
6
FOCUS MARK 7 IRIS+
COPY
TEXT OFF
13
14
IRIS+
COPY FOCUS+ MARK
TEXT OFF
SET 4
3
ALM.OFF
COPY 6FOCUS+
LOG
ALM.OFF
BACK UP
LOG
ALARM
CLEAR
Playback
playback
of16recorded images.
13or reverse
14
15
9
10/0
11
12
INFO
PTZ
BACK UP
5
1
9
BACK UP PTZ
LOG 2
3
13
LOG
ALM.OFF
5
OSD
ALARM1
HDD
OSD
11
Step 1
8
IRIS+
SET 4
10/0
ALM.OFF
FOCUS COPY 6FOCUS+ MARK 7 IRIS+
2
ALARM
INFO
HDD
NET
7
16
TEXT OFF
3
IRIS -
Searches the recorded images in reverse or skips the recorded images.
1
NET
LOG
INFO
BACK UP5 PTZ
OSD
TOUR
6
PTZ
14
1
2
Pauses playback.
9
SHIFT
12
FOCUS -
REC
•
Weekday: Sets the recording mode to weekday (Mon-Fri).
•
Weekend: Sets the recording mode to weekend (Sat-Sun).
Displays the Monitor menu to set the first camera channel.
SHIFT
MARK
SEARCH
LOG-IN
Exits the menu or returns to the previous screen.
REC
SETUP
VIEW
CAM
BACK
Starts or stops instant recording.
-
•
•
•
•
-
Opens or closes the disc tray.
IRIS+
4 MARK
SEARCH
8
LOG-IN
-
SHIFT
SEARCH
LOG-IN
SEARCH
VIEW
SEARCH
CAM
BACK
SETUP
RECHDD
SETUP
Z
FOCUS+
FOCUS+
2
ALM.OFF
VIEW
5
3
6
ALARM
LOG
9
0
COPY
MARK
VIEW
ARCH
PTZ
1
INFO
BACK UP
SETUP
OG-IN
OSD
CAM
VIEW
CAM
BACK
REC
SETUP
CAM
BACK
CAM
CAM
BACK
BACK
REC
VIEW
NET
SEARCH
CAM
TEXT OFF
BACK
FOCUS -
7
SET
MOVE
IRIS+
4
REC
IRIS -
BACK
8
RECCLEAR
SHIFT
TOUR
REC
VIEW
IRIS+
CAM
REC
BACK
REC
BACK
BACK
REC
REC
VIEW
SETUP
LOG-IN
LOG-IN
REC
Set the appropriate DVR system ID to operate via the IR Remote Controller when using the multiple DVR. Press
the ID button then press the number button within 2 seconds to select the system ID of the DVR. If you set the
system ID to “0”, you can control multiple DVR at the same time.
SETUP
LOG-IN
SEARCH
CAM
SETUP
VIEW
SHIFT
SETUP
VIEW
SEARCH
TOUR
SETUP
LOG-IN
TOUR
IRIS -
CLEAR
REC
BACK
To select the PTZ preset number, ID or channel.
-
MOVE
REC
NET: Blinks when the network is connected.
HDD: Lights when the HDD is accessed.
ALARM: Lights when the alarm out is in progress.
BACK UP: Lights when the data back up is in progress.
SHIFT
0
REC
BACK
SEARCH
LOG-IN
REC
SETUP
VIEW
CAM
BACK
Step 5
Set recording mode for the Continuous and Event recording.
•
Resolution: Selects the recording resolution.
•
Quality: Selects the recording picture quality.
•
Frame Rate: Selects the frame rate. The frame rate is the number of recorded frames per
second. According to resolution, the frame rate is set automatically.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement