LG | LS923P-B | LG LS921P-B Owner’s Manual

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of uninsulated dangerous voltage within the product’s
enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.
OWNER'S MANUAL
Color Video Camera
FCC WARNING: This equipment may generate or use radio frequency energy.
Changes or modifications to this equipment may cause harmful interference
unless the modifications are expressly approved in the instruction manual. The
user could lose the authority to operate this equipment if an unauthorized
change or modification is made.
REGULATORY INFORMATION: FCC Part 15
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LS923
LS921
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
•
•
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced
only with the same or equivalent type recommended by the manufacturer.
Dispose of used batteries according to the manufacturer’s instructions.
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant provisions of Directive 2004/108/EC, 2006/95/EC, and 2009/125/EC.
Holes in metal, through which insulated wires pass, shall have smooth well
rounded surfaces or shall be provided with brushings.
European representative :
LG Electronics Service Europe B.V.
Veluwezoom 15, 1327 AE Almere,
The Netherlands (Tel : +31-(0)36-547-8888)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du
Canada.
Warning: Do not install this equipment in a confined space such as a bookcase
or similar unit.
Disposal of your old appliance
Warning: Wiring methods shall be in accordance with the National Electric
Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this product
may cause radio interference in which case the user may be required to take
adequate measures.
Warning: To reduce a risk of fire or electric shock, do not expose this product to
rain or moisture.
1.
When this crossed-out wheeled bin symbol is attached to
a product it means the product is covered by the European
Directive 2002/96/EC.
2.
All electrical and electronic products should be disposed of
separately from the municipal waste stream via designated
collection facilities appointed by the government or the local
authorities.
3.
The correct disposal of your old appliance will help prevent
potential negative consequences for the environment and
human health.
4.
For more detailed information about disposal of your old
appliance, please contact your city office, waste disposal
service or the shop where you purchased the product.
Caution: This installation should be made by a qualified service person and
should conform to all local codes.
Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Caution: The apparatus shall not be exposed to water (dripping or splashing)
and no objects filled with liquids, such as vases, shall be placed on the apparatus.
To disconnect power from mains, pull out the mains cord plug. When installing the product, ensure that the plug is easily accessible.
EEE Compliance with Directive. (for Turkey only)
이 기기는 업무용(A급) 전자파적합기기로서 판매자 또는 사용자는 이 점을
주의하시기 바라며, 가정외의 지역에서 사용하는 것을 목적으로 합니다.
A suitable conduit entries, knock-outs or glands shall be provided in the
cable entries of this product in the end user.
BZ03
P/NO : MFL66987643
Important Safety Instructions
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade
or the third prong are provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
Power Supply
Features
LS921P-B/ LS921N-B/ LS923P-B, LS923N-B:
This Color Video Camera is designed for installation in an video surveillance
system.
This camera must always be operated a AC 24 V or DC 12 V Certified/Listed,
class 2 power supply only.
LS921P-C/ LS923P-C:
This camera must always be operated a AC 230 V.
LS921
Be careful of AC frequency when the camera is operated with Line lock mode.
•
High resolution and high sensitivity with a 6 mm Interline
SUPER HAD CCD II.
•
650 TV lines of horizontal resolution.
•
Line Lock when using AC 24 V.
Line Lock when using AC 230 V.
(LS921P-C).
Be careful not to spill water or other liquids on the unit. Be cautions not to get
combustible or metallic material inside the body. If used with foreign matter
inside, the camera is liable to fail or to get cause of fire or electric shock.
•
Automatically switch between DC 12 V and AC 24 V.
•
High resolution and high sensitivity with a 6 mm Interline
Color CCD.
•
Remove dust or dirt on the surface of the lens with a blower.
•
600 TV lines of horizontal resolution.
•
Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small quantity of neutral detergent then wipe dry.
•
Line Lock when using AC 24 V.
•
•
Avoid the use of volatile solvents such as thinners, alcohol, benzene and
insecticides.
They may damage the surface finish and/or impair the operation of the
camera.
Line Lock when using AC 230 V.
(LS923P-C).
•
•
13. Unplug this apparatus during lightning storms or when unused for long
periods of time.
Extremely hot or cold places (operating temperature
-10 °C to 50 °C, however, we recommend that the unit be used within a
temperature range of 0 °C to 45 °C)
•
Damp or dust place
•
Places exposed to rain
•
Places subject to strong vibration
•
Close to generators of powerful electromagnetic
radiation such as radio or TV transmitters.
NTSC
PAL
PAL
NTSC
PAL
PAL
Total/Effective Pixels
470 000
/ 440 000
Pixels
470 000
/ 440 000
Pixels
410 000
/ 380 000
Pixels
470 000
/ 440 000
Pixels
470 000
/ 440 000
Pixels
Pick-up Device
LS921P-B is used for the description, operations and details provided in this
operating guide.
15.734 kHz 15.625 kHz 15.625 kHz 15.734 kHz 15.625 kHz 15.625 kHz
59.94 Hz
(VD)
50 Hz(VD)
59.94 Hz
(VD)
50 Hz(VD)
50 Hz(VD)
More than 650 TV Lines
More than 600 TV Lines
S/N Ratio
More than 52 dB (AGC Off, F1.2)
More than 52 dB (AGC Off, F 1.0)
1.0 Vp-p Composite (75 Ω)
Day
0.0001 lx (Sens-up Auto, F1.2)
(0.05 lx: Sens-Up Off, F1.2)
0.0003 lx (Sens-Up Auto, F1.2)
(0.1 lx : Sens-Up Off, F1.2)
Night
0.000 01 lx (Sens-up Auto, F1.2)
(0.0005 lx: Sens-Up Off, F1.2)
0.000 03 lx (Sens-Up Auto, F1.2)
(0.01 lx : Sens-Up Off, F1.2)
Iris Control
DC / ELC / VIDEO
Gain Control
OFF / LOW / MIDDLE / HIGH
Exposure
Shutter Speed
Stabilizer
White Balance
LS921
No
Yes
Filter change
Yes
Power Source
No
50 Hz(VD)
Resolution
Day & Night
Filter change
XDI-A
Scanning Frequency (H)
Sens-up
Yes
XDI-S2
Internal / Line Lock
WDR
Yes
6 mm Interline Color CCD
Synchronization System
Models
LS923
6 mm Interline SUPER HAD CCD II
C / CS Mount Lens
Minimum
Illumination
This table shows the differences between the models.
LS923P-C
410 000
/ 380 000
Pixels
Video Output Signal
Automatically switch between DC 12 V and AC 24 V.
LS921P-C LS923N-B LS923P-B
Signal System
Scanning Frequency (V)
Features Chart
Operating and storage location
LS921N-B LS921P-B
Signal Process
•
LS923
ITEM
Lens
Handling of the unit
Avoid viewing a very bright object (such as light fittings) during an extended
period. Avoid operating or storing the unit in the following locations.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does
not operate normally, or has been dropped.
This manual contains instructions on how to install and manage the Color Video
Camera in your video surveillance system. Should you require any technical
assistance, please contact authorized service center.
Note:
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tipover.
Specification
ALC / ELC
1/60 to
1/90 000
1/60 to
1/90 000
1/50 to 1/90 000
1/50 to 1/90 000
ATW / AWC/PUSH / MANUAL
DC 12 V / AC 24 V
AC 230 V
DC 12 V / AC 24 V
Power Consumption
4.4 W
Operation Temperature
-10 ºC to 50 ºC (Humidity: 0 % RH to 80 % RH)
Storage Temperature
Weight
Dimension (W x H x D)
AC 230 V
-20 ºC to 60 ºC (Humidity: 0 % RH to 85 % RH)
415 g
485 g
415 g
67.4 mm x 61.5 mm x 134 mm
485 g
a
Install the camera and mounting
bracket securely.
b
Remove the lens mount cap from the
camera.
c
Install the C or CS mount type lens.
d
Install the camera and mounting arm.
2-2
2-1
<한국어>
<简体中文>
牢固安装摄像机和安装架。
カメラと取り付け具をしっかりと取り付けます。
<한국어>
<简体中文>
<日本語>
카메라의 렌즈 보호 덮개를 제거하세요.
<한국어>
从摄像机上取下镜头支座盖。.
<简体中文>
カメラからレンズ・マウント・キャップを取り外します。
<日本語>
C 마운트 또는 CS 마운트 형식의 렌즈를 설치하세요.
安装 C 或 CS 型镜头。
<한국어>
<简体中文>
CまたはCSマウント・タイプ・レンズを取り付けます。
<日本語>
카메라를 벽면에 설치하세요.
安装摄像机和安装臂。
カメラと取り付けアームを取り付けます。
<‫>ﻓﺎﺭﺳﻲ‬
.‫ﺩﻭﺭﺑﻴﻦ ﻭ ﭘﺎﻳﻪ ﻧﮕﻪ ﺩﺍﺭﻧﺪﻩ ﺁﻥ ﺭﺍ ﻣﺤﻜﻢ ﻧﺼﺐ ﻧﻤﺎﻳﻴﺪ‬
<‫>ﻓﺎﺭﺳﻲ‬
.‫ﺩﺭﭘﻮﺵ ﻟﻨﺰ ﺭﺍ ﺑﺮﺩﺍﺭﯾﺪ‬
<‫>ﻓﺎﺭﺳﻲ‬
.‫ﻟﻨﺰ ﻫﺎی ﺳﯽ ﻭ ﻳﺎ ﺳﯽ ﺍﺱ ﺭﺍ ﻧﺼﺐ ﻧﻤﺎﻳﻴﺪ‬
<‫>ﻓﺎﺭﺳﻲ‬
.‫ﺩﻭﺭﺑﻴﻦ ﻭ ﺑﺎﺯﻭی ﻧﮕﻪ ﺩﺍﺭﻧﺪﻩ ﺁﻥ ﺭﺍ ﻧﺼﺐ ﻧﻤﺎﻳﻴﺪ‬
<‫>ﻋﺮﺑﻲ‬
.‫ﺭﻛﺐ ﺍﻟﻜﺎﻣﻴﺮﺍ ﻣﻊ ﺩﻋﺎﻣﺔ ﺍﻟﺘﺜﺒﻴﺖ ﺑﺈﺣﻜﺎﻡ‬
<‫>ﻋﺮﺑﻲ‬
.‫ﺃﺯﻝ ﻏﻄﺎﺀ ﺍﻟﻌﺪﺳﺔ ﻣﻦ ﺍﻟﻜﺎﻣﻴﺮﺍ‬
<‫>ﻋﺮﺑﻲ‬
.CS ‫ ﺃﻭ‬C ‫ﺭﻛﺐ ﻋﺪﺳﺎﺕ ﻣﻦ ﻧﻮﻉ‬
<‫>ﻋﺮﺑﻲ‬
.‫ﺭﻛﺐ ﺍﻟﻜﺎﻣﻴﺮﺍ ﻭﺫﺭﺍﻉ ﺍﻟﺘﺜﺒﻴﺖ‬
e
<LS921P-B/ LS921N-B/ LS923P-B, LS923N-B>
<한국어>
<简体中文>
<日本語>
a
Connect the power and monitor.
Loosen the flange-back fixing lever.
b
Up and down the flange-back
adjusting lever to obtain a focused
point.
<LS921P-C/ LS923P-C>
전원 및 모니터를 연결하세요.
摄像机连接电源和监视器。
電源とモニターを接続します。
<‫>ﻓﺎﺭﺳﻲ‬
.‫ﻣﻨﺒﻊ ﺑﺮﻕ ﻭ ﻫﻤﭽﻨﻴﻦ ﻣﺎﻧﺘﻴﻮﺭ ﺭﺍ ﻭﺻﻞ ﻛﻨﻴﺪ‬
<‫>ﻋﺮﺑﻲ‬
.‫ﻭﺻﻞ ﺍﻟﺘﻴﺎﺭ ﺍﻟﻜﻬﺮﺑﺎﺋﻲ ﻭﺍﻟﺸﺎﺷﺔ‬
Flange-back Adjustment
Installation Guide
<日本語>
카메라에 설치 브래킷을 설치하세요.
<한국어>
<简体中文>
<日本語>
Flange-back 고정레버를 풀어주세요.
<한국어>
<简体中文>
松开法兰距固定螺丝。
フランジ背面固定レバーを緩めます。
<日本語>
영상을 보면서 Flange-back 조절레버를 이용하여 초
점을 맞추세요.
使用法兰距调节环以获得焦点。
フランジ背面調整レバーを上げ下げして焦点を定
めます。
<‫>ﻓﺎﺭﺳﻲ‬
.‫ﺍﻫﺮﻡ ﺛﺎﺑﺖ ﻛﻨﻨﺪﻩ ﺩﺍﺭﺍی ﻟﺒﻪ ﻋﻘﺐ ﺭﺍ ﺷﻞ ﻛﻨﻴﺪ‬
<‫>ﻓﺎﺭﺳﻲ‬
‫ﺍﻫﺮﻡ ﺗﻨﻈﻴﻢ ﻛﻨﻨﺪﻩ ﺩﺍﺭﺍی ﻟﺒﻪ ﻋﻘﺐ ﺭﺍ ﺟﻬﺖ ﭘﻴﺪﺍ ﻛﺮﺩﻥ ﻧﻘﻄﻪ ﻓﻮﻛﻮﺱ ﺑﺎﻻ ﻭ‬
‫ﭘﺎﻳﻴﻦ ﺑﺒﺮﻳﺪ‬
<‫>ﻋﺮﺑﻲ‬
.‫ﻓﻚ ﺫﺭﺍﻉ ﺗﺜﺒﻴﺖ ﺍﻟﺸﻔﺔ ﺍﻟﺨﻠﻔﻴﺔ‬
<‫>ﻋﺮﺑﻲ‬
.‫ﺍﺟﺬﺏ ﺫﺭﺍﻉ ﺿﺒﻂ ﺍﻟﺸﻔﺔ ﺍﻟﺨﻠﻔﻴﺔ ﻷﻋﻠﻰ ﻭﻷﺳﻔﻞ ﻟﻠﺤﺼﻮﻝ ﻋﻠﻰ ﺑﺆﺭﺓ ﻣﺮﻛﺰﺓ‬
Download PDF