LG LRN8240D-NH User guide

LG LRN8240D-NH User guide
CAUTION
Disposal of your old appliance
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of uninsulated
dangerous voltage within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.
1.
This crossed-out wheeled bin symbol indicates that waste electrical and
electronic products (WEEE) should be disposed of separately from the
municipal waste stream.
2.
Old electrical products can contain hazardous substances so correct
disposal of your old appliance will help prevent potential negative
consequences for the environment and human health. Your old
appliance may contain reusable parts that could be used to repair other
products, and other valuable materials that can be recycled to conserve
limited resources.
SIMPLE MANUAL
Network Video Recorder
3.
You can take your appliance either to the shop where you purchased
the product, or contact your local government waste office for details of
your nearest authorised WEEE collection point. For the most up to date
information for your country please see www.lg.com/global/recycling
An extended Owner’s Manual that contains information on the advanced features is located on the CD-ROM provided in an electronic version. To read
these files, you will need to use a Personal Computer (PC) equipped with a CD-ROM drive.
Disposal of waste batteries/accumulators
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the product.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
REGULATORY INFORMATION: FCC Part 15
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his own expense.
•
A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of
this product in the end user.
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the
same or equivalent type recommended by the manufacturer. Dispose of used batteries
according to the manufacturer’s instructions.
•
Holes in metal, through which insulated wires pass, shall have smooth well rounded
surfaces or shall be provided with brushings.
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
1.
This symbol may be combined with chemical
symbols for mercury (Hg), cadmium (Cd) or lead
(Pb) if the battery contains more than 0.0005% of
mercury, 0.002% of cadmium or 0.004% of lead.
2.
All batteries/accumulators should be disposed
separately from the municipal waste stream via
designated collection facilities appointed by the
government or the local authorities.
Pb
3.
The correct disposal of your old batteries/accumulators will help to prevent potential
negative consequences for the environment, animal and human health.
4.
For more detailed information about disposal of your old batteries/ accumulators,
please contact your city office, waste disposal service or the shop where you
purchased the product. (http://www.lg.com/global/sustainability/environment/takeback-recycling/global-network-europe)
LRN8240D Series
Model LRN8240D (24 Channel) is used for the description, operation and details provided in this operating guide.
Note: It is strongly recommended that you change the password of the administrator for the protection of the security of personal information. Do not
leave 000000 as the default password. Make sure that you keep your password and write it down in a safe place so that you do not forget it.
Basic Connection Overview
Connect power
cord.
Safety way to remove the battery or the battery from the equipment:
Connect the
alarm (relay).
Remove the old battery or battery pack, follow the steps in reverse order than the assembly.
To prevent contamination of the environment and bring on possible threat to human and
animal health, the old battery or the battery put it in the appropriate container at designated
collection points. Do not dispose of batteries or battery together with other waste. It is
recommended that you use local, free reimbursement systems batteries and accumulators.
The battery shall not be exposed to excessive heat such as sunshine, fire or the like.
Connect audio
amplifier.
Removal of waste batteries and accumulators
(Product with embedded battery ONLY)
In case this product contains a battery incorporated within the product which cannot be readily
removed by end-users, LG recommends that only qualified professionals remove the battery,
either for replacement or for recycling at the end of this product’s working life. To prevent
damage to the product, and for their own safety, users should not attempt to remove the battery
and should contact LG Service Helpline, or other independent service providers for advice.
2
RS - 232C
CAUTION: Internal lithium battery in the unit should not be replaced by user because of
danger of explosion if battery is incorrectly replaced ,and must be replaced with the same
type battery by expert.
D- D+ G
Replacement of battery
Connect keypads (optional).
Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or
moisture.
Caution: This installation should be made by a qualified service person and should conform
to all local codes.
Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified
personnel only.
Caution: The apparatus should not be exposed to water (dripping or splashing) and no
objects filled with liquids, such as vases, should be placed on the apparatus.
Caution:
This product employs a Laser System. To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future reference. Should the unit require
maintenance, contact an authorized service center. Use of controls, adjustments, or the
performance of procedures other than those specified herein may result in hazardous
radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure.
The Power Plug is the disconnecting device. In case of an emergency, the Power Plug must
remain readily accessible.
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant
provisions of Directive 2004/108/EC, 2006/95/EC, and 2011/65/EU.
Contact office for compliance of this product :
LG Electronics Inc.
EU Representative, Krijgsman 1,
1186 DM Amstelveen, The Netherlands
•
Please note that this is NOT a Customer Service contact point. For Customer Service
Information, see Warranty Card or contact the dealer that you purchased this product.
Connect the external SATA device.
Символ «не для пищевой
продукции» применяется в
соответствие с техническим
регламентом Таможенного
союза «О безопасности
упаковки» 005/2011 и указывает
на то, что упаковка данного
продукта не предназначена для
повторного использования и
подлежит утилизации. Упаковку
данного продукта запрещается
использовать для хранения
пищевой продукции.
Символ Кедендік одақтың
005/2011 техникалық
регламентіне сәйкес
қолданылады және осы
өнімнің қаптамасын
екінші рет пайдалануға
арналмағанын және жоюға
жататынын көрсетеді.
Осы өнімнің қаптамасын
азық-түлік өнімдерін сақтау
үшін пайдалануға тыйым
салынады.
Символ «петля Мебиуса»
указывает на возможность
утилизации упаковки.
Символ может быть дополнен
обозначением материала
упаковки в виде цифрового и/или
буквенного обозначения.
Символ қаптаманы жою
мүмкіндігін көрсетеді. Символ
сандық код және/немесе әріп
белгілері түріндегі қаптама
материалының белгісімен
толықтырылуы мүмкін.
Connect an external USB device for
backup or playback.
Connect a mouse device.
Connect network cable for client control or IP camera input.
Connect
alarm
sensors.
Connect HDMI type monitor.
Connect VGA monitor.
Российская Федерация
Импортер ООО “ЛГ Электроникс Рус”
Адрес импортера: 143160 Российская Федерация, Московская область, Рузский район,
сельское поселение Дороховское, 86 км. Минского шоссе, д.9
Адрес производителя: ЛГ ЭЛЕКТРОНИКС (ХУЖОУ) ИНК., ЗАВОД ХАТАИ
ЛГ Электроникс (Хужоу) Инк., завод Хатаи
516006, Китай, пров. ГуанДонг, г. Хужоу, Промышленная зона
Жонгкай, Индустриальный парк Хутаи, ХуФенг Донг Уи Роуд, 13.
Сделано в Китае
*MFL69441509*
1512 (V5.0)
Front Panel and Remote Control
Front
Panel
Remote
Control
NET
HDD
OSD
PTZ
FOCUS+
IRIS+
1
2
3
4
ALM.OFF
FOCUS -
INFO
5
6
Setup Wizard
The Setup Wizard appears on the screen when you turn on the unit for the first time or select [Setup Wizard] on the Setup menu. You can set the
system name, display language, date, time, network settings, recording schedule and recording mode on the initial setup wizard.
Description
IRIS -
7
8
SET
CLEAR
Turns on or off.1 Press and
hold3 for more
than 2 seconds to turn on or off.
2
4
NET
ALARM
OSD
LOG
9
BACK UP
HDD
PTZ
INFO
COPY
5
ALARMOSD
HDD
INFO
BACK UP
OSD
ALARM
INFO
BACK UP
5
NET
FOCUS+
PTZ
FOCUS+
IRIS+
1
2
3
4
ALM.OFF
FOCUS -
IRIS -
6
7
8
SET
CLEAR
MOVE
TOUR
IRIS+
INFO
HDD
3
OSD
4
ALARM
5
LOG
IRIS 9-
FOCUS BACK UP
7
CLEAR
MOVE
TOUR
NET
9
OSD
1
2
ALM.OFF
1
INFO
2
5 2
PTZ
9
9FOCUS+
0 IRIS+
5 BACK UPALM.OFF
6
7
COPY FOCUS
FOPTZ
-
MARK
5K UP
2
LOG
OSD
6 3
COPY
9
OG
ALM.OFF
NET
7 SET
4
MARK
0 FOCUS
9 COPY
6
MARKSET
NET
OSD
0
1
SET IRIS -
0 MARK
7
HDD
PY
INFO
5
PTZ
1
ALARM
NET
MARK
MOVE
HDD
CLEAR
TOUR
PTZ
SHIFT
2
4
IRIS -
7
IRIS+
8
3
PTZ
4
SET
FOCUS+
CLEAR
IRIS+
02 FOCUS
3IRIS
7
MARK
ALM.OFF
8 MOVE
FOCUS
IRIS+
6
SET
7
CLEAR
92
ALARM
03
LOG
4
SET
ALM.OFF
COPY
FOCUS
9 MARK
IRIS
0MOVE
TOUR
6 UP
FOCUS+
BACK
7
IRIS+
COPY
8
MARK
MOVE
LOG-IN
2
LOG
3
NET
4
OSD
SET
PTZ
CLEAR
FOCUS+
IRIS+
9
ALM.OFF
0 FOCUS
1IRIS
2
SHIFT
3
4
6
COPY
7
HDD
MARK
8
INFO
MOVE
ALM.OFF
TOUR
FOCUS -
IRIS -
5
PTZ
CLEAR
OSD
SET
7
IRIS+
8
2
LOG
SHIFT
3
4
SET
CLEAR
9
ALM.OFF
TOUR
6
FOCUS+
0 FOCUS
IRIS -
OSD
5 UP
BACK
PTZ
6
COPY
FOCUS+
7
MARK
IRIS+
8
MOVE
1
ALARM
2
LOG
3
4
SET
CLEAR
0 FOCUS
IRIS -
6
COPY
FOCUS+
7
MARK
IRIS+
8
MOVE
2
LOG
3
4
SET
CLEAR
9
ALM.OFF
0 FOCUS
6
COPY
7
MARK
8
MOVE
SET
CLEAR
MOVE
TOUR
VIEW
7
8
CAM
SEARCH
LOG-INVIEW
SEARCH
LOG-IN
CAM
BACK
CAM
VIEW
CAM
BACK
REC
Sets the mark point for recording search.
SETUP
CAM
SEARCHBACK
REC
SETUP
VIEW
CAM
BACK
REC
SETUP
VIEW
CAM
BACK
VIEW
CAM
BACK
SETUP
VIEW
CAM
CAM
BACK
CAM
BACK
VIEW
CAM
BACK
REC
ETUP
VIEW
CAM
BACK
REC
P
CAM
BACK
Time Zone: Select the time zone in the area where the System is installed.
•
Daylight Saving: Mark up when you use the daylight saving function.
•
Daylight Saving Start: Select the Daylight Saving start time.
•
Daylight Saving End: Select the Daylight Saving end time.
Step 3
Set network address for LAN ports.
•
Interface: Select a LAN port you want to use (Ethernet 0).
•
DHCP: Select this option when a DHCP server is installed on the network to allow IP address
assignment. With this setting, the IP address is assigned automatically.
•
IP Address: Enter the IP address.
•
Subnet Mask: Enter the subnet mask address.
•
Gateway: Enter the gateway address.
•
Primary DNS: Enter the Primary domain name server that translates the hostnames into IP
address.
•
Secondary DNS : Enter the Secondary DNS server address that backups the Primary DNS.
OK: Confirms menu selections.
Set recording schedule.
Displays the User Log-In dialog box or logs out.
BACK
CAM
BACK
Displays the search menu.
BACK
Displays the setup menu.
Displays the split mode menu.
REC
SETUP
•
•
REC
VIEW
Time Format: Select the time display format.
Step 4
REC
CAM
Date Format: Select the date display format.
•
wsad: Select or move between the menu options.
REC
SETUP
VIEW
Time: Select the current time.
•
•
REC
SETUP
SETUP
•
REC
BACK
SETUP
LOG-IN
Date: Select the current year, month and day.
Zooms in/out on playback window.
VIEW
BACK
VIEW
•
REC
SETUP
REC
CAM
Set date and time.
BACK
REC
SETUP
LOG-IN
REC
CAM
LOG-IN
VIEW
VIEW
SETUP
LOG-IN
REC
VIEW
SETUP
SEARCH
EARCH
REC
Tours all registered preset positions in the camera.
SEARCH
OG-IN
REC
VIEW
SEARCH
LOG-IN
SEARCH
BACK
Moves the camera to the preset position.
TOUR
BACK
VIEW
SEARCH
CAM
SETUP
SEARCH
VIEW
SHIFT
SEARCH
VIEW
Displays the export menu.
SEARCH
TOUR
LOG-IN
REC
SETUP
LOG-IN
SHIFT
SETUP
CAM
BACK
REC
BACK
SEARCH
LOG-IN
LOG-IN
TOUR
IRIS -
SETUP
SHIFT
BACK
REC
Deletes a memorized preset position.
SEARCH
CLEAR
CAM
Step 2
REC
BACK
REC
LOG-IN
LOG-IN
SEARCH
SET
BACK
SHIFT
VIEW
TOUR
SHIFT
MOVE
BACK
REC
Registers the PTZ camera’s preset position.
IRIS+
LOG-IN
CAM
CAM
CAM
CAM
VIEW
SHIFT
0
BACK
SHIFT
TOUR
CLEAR
6
CAM
SHIFT
CLEAR
4
BACK
REC
SETUP
Displays the System Log List.
8 IRIS
IRIS -
VIEW
VIEW
SEARCH
3
CAM
REC
SETUP
SETUP
SHIFT
FOCUS -
VIEW
SETUP
SETUP
LOG-IN
TOUR
REC
SETUP
VIEW
VIEW
SEARCH
INFO
MOVE
FOCUS+
SHIFT
SHIFT
TOUR
1
ALARM
9
ALM.OFF
BACK
BACK
SETUP
SETUP
0
INFO
CAM
Cancels alarm activation and returns the system to the condition before the alarm was activated.
SEARCH
NET
8
VIEW
BACK
CAM
SEARCH
SHIFT
LOG-IN CLEAR
HDD
MARK
5 UP
BACK
PTZ
CAM
SEARCH
5
PTZ
Language: Select a language for the setup menu and information display.
REC
SETUP
REC
LOG-IN
TOUR
IRIS -
INFOUP
BACK
•
BACK
If you use the Sub-function of the channel button, the button is activated.
SEARCH
LOG-IN8
44
MARK
TOUR
LOG-IN
SEARCH
IRIS -
2
MOVE
SEARCH
LOG-IN
LOG-IN
IRIS+
IRIS+
ALM.OFF
CLEAR
Displays the system information.
4
6
COPY
INFO
0
PTZ
SET
SEARCH
3
FOCUS+
5
MARK
TOUR
8
Adjust iris position.
IRIS+
FOCUS -
SHIFT
CAM
Adjusts focus position.
SHIFT
6
FOCUS+
PTZ
LOG
1
IRIS MOVE
7
VIEW
SHIFT
TOUR ALM.OFF
91
TOUR ALM.OFF
VIEW
Switches this unit to PTZ mode to control the connected PTZ camera.
TOUR
FOCUS+
TOUR
System Name: Enter the system name by using alphabetic letter, numeric digit and symbols
up to 21 characters. The number of maximum characters is depends on the language.
REC
SETUP
SHIFT
MOVE
TOUR
2
LOG
OSD
INFO
8
5 UP
BACK
HDD
OSD
ALARM
SEARCH
LOG-IN
SHIFT
IRIS -
8
MOVE
CLEAR
8
MOVE
MOVE
CLEAR
8
CLEAR
IRIS - 8
BACK
REC
CLEAR
4
8 CLEAR
MOVE
CAM
Accesses or minimizes the System Control Bar (OSD).
IRIS+
4
SET
IRIS -
SET
VIEW
TOUR
8
CLEAR
IRIS SETUP
7
IRIS+
7
MARK
4 IRIS SET
SETUP
4
0 FOCUS
7 4
IRIS+
0
3FOCUS -
IRIS+
•
SHIFT
0
FOCUS MARK
VIEW
3
3
3
9
ALM.OFF
SEARCH
FOCUS+
FOCUS
SEARCH
REC
SETUP
LOG-IN
You can input a number with channel buttons.
Note: You can also use the channel buttons for sub-function with SHIFT button.
-
6 LOG-IN
FOCUS+
2 FOCUS+
LOG
6 3
LOG FOCUS+
2ALM.OFF
LOG
MOVEIRIS -
IRIS+
Stops playback.
0
MARK
PTZ
5
PTZ
PTZ
ALARM
SET
SEARCH
INFO
5 UPALM.OFF
6 FOCUSIRIS+
INFOPTZ BACK
FOCUS+ COPY
SD 1
6
9
-
Set system name and display language.
BACK
SEARCH
SEARCH
NET
1
ALARM
1RM
INFO
TOUR
8
CLEAR
LOG-IN
HDD
OSD
HDD
7
FOCUS+
COPY
LOG-IN
OSD
DDOSD
7
MARK
FOCUS -
6
BACK UP
SHIFT
CAM
CLEAR
LOG-IN
SET
ET
IRIS+
IRIS MOVE
SET IRIS+
FOCUS+
COPY
ALM.OFF
LOG
SHIFT
MARK
VIEW
Forward
searches
the recorded images or skips the recorded images.
2
3
4
ALARM
0
COPY
8
LOG-IN
8
SHIFT
FOCUS MARK
6
PTZ
ALM.OFF
COPY
5
TOUR
REC
SETUP
SHIFT
LOG
1
FOCUS+
0
ALM.OFF
COPY
LOG PTZ
BACK UP
INFO
HDD
SEARCH
Playback
or0 reverse
playback
of recorded images.
9 2
3
4
1
HDD
SHIFT
MOVEIRIS -
SET
9
5
OSD
ALARM
PTZ
LOG
INFO
BACK UP
ALARMOSD
NET
4
FOCUS MARK
7
CLEAR
Searches
the
recorded
images
in reverse or skips the recorded images.
1
2
3
4
NET
HDD
NET
8
SET IRIS+
3
0
Step 1
IRIS -
7
FOCUS+
ALM.OFF
COPY
6
TOUR
FOCUS -
6
LOG PTZ
5
IRIS+
SHIFT
MOVE
ALM.OFF
MARK
Pauses playback.
1
9 2
NET
FOCUS+
0
Displays the Monitor menu to set the first camera channel.
Exits the menu or returns to the previous screen.
Starts or stops instant recording.
-
To select the PTZ preset number, ID or channel.
-
Set the appropriate system ID to operate via the IR Remote Controller when using the multiple system. Press
the ID button then press the number button within 2 seconds to select the system ID of the system. If you set
the system ID to “0”, you can control multiple system at the same time.
•
Weekday: Sets the recording mode to weekday (Mon-Fri).
•
Weekend: Sets the recording mode to weekend (Sat-Sun).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement