LG LCD5300R-BP Quick start guide

LG LCD5300R-BP Quick start guide
CAUTION
•
A suitable conduit entries, knock-outs or glands shall be provided in the cable entries of this
product in the end user.
•
Caution: Danger of explosion if battery is incorrectly replaced. Replaced only with the same or
equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions.
RISK OF ELECTRIC SHOCK
DO NOT OPEN
•
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.
OWNER'S MANUAL
IR Dome Camera
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
LCD5300R-BN
LCD5300R-BP
Warning: Do not install this equipment in a confined space such as a bookcase or similar unit.
Warning: Wiring methods shall be in accordance with the National Electric Code, ANSI/NFPA 70.
Warning: This is a class A product. In a domestic environment this product may cause radio
interference in which case the user may be required to take adequate measures.
This camera must always be operated DC 12 V or AC 24 V. Certified/Listed Adaptor which comply
with LPS.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
Handling of the unit
Be careful not to spill water or other liquids on the unit. Be cautions not to get combustible or
metallic material inside the body. If used with foreign matter inside, the camera is liable to fail or to
get cause of fire or electric shock.
•
•
•
Remove dust or dirt on the surface of the lens with a blower.
Use a dry soft cloth to clean the body. If it is very dirty, use a cloth dampened with a small
quantity of neutral detergent then wipe dry.
Avoid the use of volatile solvents such as thinners, alcohol, benzene and insecticides.
Operating and storage location
Avoid viewing a very bright object (such as light fittings) during an extended period. Avoid
operating or storing the unit in the following locations.
•
Extremely hot or cold places (operating temperature -10 °C to 50 °C, however, we recommend that the unit be used within a temperature range of 0 °C to 45 °C)
Please note that this is NOT a Customer Service contact point. For Customer Service
Information, see Warranty Card or contact the dealer that you purchased this product.
Disposal of your old appliance
1.
This crossed-out wheeled bin symbol indicates that waste
electrical and electronic products (WEEE) should be disposed of
separately from the municipal waste stream.
2.
Old electrical products can contain hazardous substances so
correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
Your old appliance may contain reusable parts that could be
used to repair other products, and other valuable materials that
can be recycled to conserve limited resources.
3.
You can take your appliance either to the shop where you
purchased the product, or contact your local government waste
office for details of your nearest authorised WEEE collection
point. For the most up to date information for your country
please see www.lg.com/global/recycling
Caution: To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel
only.
Caution: The apparatus shall not be exposed to water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the apparatus.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his own expense.
Power Supply
•
Caution: This installation should be made by a qualified service person and should conform to all
local codes.
*MFL69441505*
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s
instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug
has two blades with one wider than the other. A grounding type plug has two blades and
a third grounding prong. The wide blade or the third prong are provided for your safety. If
the provided plug does not fit into your outlet, consult an electrician for replacement of the
obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
LG Electronics Inc.
EU Representative, Krijgsman 1,1186 DM Amstelveen,
The Netherlands
Warning: To reduce a risk of fire or electric shock, do not expose this product to rain or moisture.
REGULATORY INFORMATION: FCC Part 15
1.
2.
3.
4.
5.
6.
7.
Contact office for compliance of this product:
Holes in metal, through which insulated wires pass, shall have smooth well rounded surfaces
or shall be provided with brushings.
FCC WARNING: This equipment may generate or use radio frequency energy. Changes or
modifications to this equipment may cause harmful interference unless the modifications are
expressly approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
Important Safety Instructions
LG Electronics hereby declares that this/these product(s) is/are in
compliance with the essential requirements and other relevant
provisions of Directive 2004/108/EC and 2011/65/EU.
Символ «не для пищевой продукции»
применяется в соответствие с
техническим регламентом Таможенного
союза «О безопасности упаковки»
005/2011 и указывает на то, что упаковка
данного продукта не предназначена для
повторного использования и подлежит
утилизации. Упаковку данного продукта
запрещается использовать для хранения
пищевой продукции.
Символ Кедендік одақтың
005/2011 техникалық
регламентіне сәйкес
қолданылады және осы
өнімнің қаптамасын екінші рет
пайдалануға арналмағанын
және жоюға жататынын
көрсетеді. Осы өнімнің
қаптамасын азық-түлік өнімдерін
сақтау үшін пайдалануға тыйым
салынады.
Символ «петля Мебиуса» указывает на
возможность утилизации упаковки.
Символ может быть дополнен
обозначением материала упаковки
в виде цифрового и/или буквенного
обозначения.
Символ қаптаманы жою
мүмкіндігін көрсетеді. Символ
сандық код және/немесе әріп
белгілері түріндегі қаптама
материалының белгісімен
толықтырылуы мүмкін.
Specification
Item
LCD5300R-BN
LCD5300R-BP
Item
Signal System
NTSC
PAL
Digital Zoom
x16
Sens-up
OFF / AUTO(x2, ... x512)
White Balance
AUTO / ATW / ONE PUSH / MANUAL
Privacy Zone Masking
14 Masks
Image Device
Total/Effective Pixels
Number
6 mm (1/3 Type) Exview HAD CCD II
520 000 Pixels / 480 000 Pixels
610 000 Pixels / 570 000 Pixels
Horizontal Resolution
650 TV Lines (Color), 700 TV Lines (B/W)
ISP
XDI-V
Lens
Minimum
Illumination
(30 IRE)
2.8 mm to 11 mm Vari-focal Lens, F1.2
LCD5300R-BN
LCD5300R-BP
Motion Detection
8 Zones
Digital Effect
OFF / V-FILP / MIRROR / ROTATE
Communication
Coaxial Communication
Color
0.03 lx (Sens-up Off, F1.2), 0.000 3 lx (Sens-up Auto, F1.2),
0.000 1 lx (Sens-up x512, F1.2)
Power Source
DC 12 V / AC 24 V
B/W
0 lx (IR LED ON)
Power Consumption
3.5 W
290 mA
•
Damp or dust place
Day & Night
ICR (AUTO / DAY / NIGHT)
Input Current
•
Places exposed to rain
IRIS Control
DC
-10 ºC to 50 ºC / 0 % RH to 80 % RH
•
Places subject to strong vibration
Operation Temperature/
Humidity
Sync. System
Internal / Line Lock
•
Close to generators of powerful electromagnetic radiation such as radio or TV transmitters.
Storage Temperature/
Humidity
-20 ºC to 60 ºC / 0 % RH to 85 % RH
Dimension (Ø x H)
140 mm x 90 mm
Weight
390 g
Scanning Frequency
(H/V)
15.734 KHz / 59.94 Hz
15.625 KHz / 50 Hz
S/N Ratio
50 dB
Video Output Signal
1 Vp-p Composite (75 Ω)
IR LED
8 EA
IR Distance
20 m
SmartIR
IR Anti-Saturation
BACKLIGHT
BLC / HSBLC / OFF
DNR
2D + 3D-DNR
Exposure
ALC /ELC
Auto Gain Control
OFF/ LOW/ MIDDLE/ HIGH
Electronic Shutter Speed
1/60 to 1/120 000
Российская Федерация
Импортер ООО “ЛГ Электроникс Рус”
Адрес импортера: 143160 Российская Федерация, Московская область, Рузский район,
сельское поселение Дороховское, 86 км. Минского шоссе, д.9
1/50 to 1/120 000
Адрес производителя: ЛГ ЭЛЕКТРОНИКС (ХУЖОУ) ИНК., ЗАВОД ХАТАИ
Г Электроникс (Хужоу) Инк., завод Хатаи
Л
516006, Китай, пров. ГуанДонг, г. Хужоу, Промышленная зона
Жонгкай, Индустриальный парк Хутаи, ХуФенг Донг Уи Роуд, 13.
Сделано в Китае
Installation
1.
Using the template as a guide, make a hole through the ceiling.
2.
Install the camera mounting bracket to the ceiling.
3.
Connect the cables to the cable jacks of the camera body.
Assemble the camera and mounting bracket as illustrated step a and b.
4.
<ITALIANO>
Utilizzando il modello come guida, praticare un foro attraverso il
soffitto.
<ITALIANO>
Installare la staffa per il montaggio della videocamera al soffitto.
<ITALIANO>
Collegare i cavi alle prese sul corpo della videocamera.
<ITALIANO>
Montare la videocamera e la staffa come illustrato nei passi a e b.
<ESPAÑOL>
Usando la plantilla como guía, haga un agujero en el techo.
<ESPAÑOL>
Instale el soporte de la cámara en el techo.
<ESPAÑOL>
Conecte los cables en los terminales del cuerpo de la cámara.
<ESPAÑOL>
Monte la cámara y el soporte como se muestra en los pasos a y b.
<PORTUGUÊS>
Conecte os cabos na tomada de cabos do corpo da câmera.
<PORTUGUÊS>
<PYCCKNЙ>
Usando o molde como um guia, faça um furo no teto.
Используя шаблон как вспомогательный элемент, сделать
отверстие в потолке.
<PORTUGUÊS>
<PYCCKNЙ>
Instale o suporte de montagem da câmera no teto.
Прикрепить монтажный кронштейн камеры к потолку.
<PYCCKNЙ>
TILT
<PORTUGUÊS>
<PYCCKNЙ>
Подключить кабелиROTATE
к разъемам на корпусе камеры.
Verilen şablonu kılavuz olarak kullanarak, tavanda bir delik açın.
Соединить камеру и монтажный кронштейн, как показано на
иллюстрации шага a и b.
PAN
TILT
<TÜRKÇE>
Monte a câmera e o suporte de montagem conforme mostrado nos
passoa a e b.
<TÜRKÇE>
<TÜRKÇE>
Kamera bağlantı parçasını tavana takın.
<TÜRKÇE>
Kamera kablolarını kamera üzerinde bulunan soketlere yerleştirin.
Kamerayı ve bağlantı parçasını adım a ve b’de gösterildiği gibi
monte edin.
ROTATE
PAN
Camera Adjustment
1.
Connect a portable monitor to the video jack.
2.
Adjust the Pan/Tilt/Rotate position of the camera.
3.
Adjust the zoom.
FAR
4.
Adjust the focus.
NEAR
TILT
FAR
TELE
NEAR
WIDE
ROTATE
PAN
WIDE
TELE
NOTE:
Disassemble the IR cover as
illustrated in case of difficult
occasion to adjust the focus lever.
NOTE:
Disassemble the IR cover as
illustrated in case of difficult
occasion to adjust the zoom lever.
NOTE:
To disassemble the camera from the mounting bracket, rotate the camera counterclockwise
with pressing the PUSH button inside the camera body.
<ITALIANO>
Collegare un monitor portatile alla presa video.
<ITALIANO>
Regolare la posizione della panoramica/dell’inclinazione/della
rotazione della telecameraRegolare lo zoom
<ITALIANO>
Regolare lo zoom
<ESPAÑOL>
Ajuste la posición Panorámica/Inclinada/Rotativa de la cámara.
<ESPAÑOL>
Ajuste el zoom.
<ITALIANO>
Regolare la focalizzazione
<ESPAÑOL>
Ajuste el enfocado.
TILT
<ESPAÑOL>
Conecte un monitor portátil a la conexión de vídeo.
FAR
NEAR
ROTATE
<PORTUGUÊS>
<PYCCKNЙ>
<TÜRKÇE>
Conecte o monitor portátil na tomada de vídeo.
PAN
Подключить переносной монитор к разъему видео.
Video soketine taşınabilir bir monitör bağlayın.
<PORTUGUÊS>
<PYCCKNЙ>
<TÜRKÇE>
Ajuste a posição da Bandeja/Lente/Rotação da Câmara.
Регулировка панорамы/наклона/вращения (Pan/Tilt/Rotate)
положения камеры
Kameranın Panlama/Eğim/Döndürme konumunu ayarlayın.
TELE
WIDE
<PORTUGUÊS>
<PYCCKNЙ>
<TÜRKÇE>
Ajuste o zoom.
Регулировка приближения
Yakınlaştırmayı ayarlayın.
<PORTUGUÊS>
<PYCCKNЙ>
<TÜRKÇE>
Ajuste o foco.
Регулировка фокуса
Odağı ayarlayın.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement