LG | GR-282SVF | LG GR-282SVF Owner’s Manual

REFRIGERATORFREEZER
OWNER'S MANUAL
PLEASE
READ THIS OWNER'S MANUAL THOROUGHLY
BEFORE OPERATING AND KEEP IT HANDY
FOR REFERENCE AT ALL TIMES.
INSTALLATION
............................................................
FEATURE CHART
OPERATION
........................................................
................................................................
2
3
5
Starting
Temperature
Ice
Control
Making
Tray meat
Defrosting
F.I.R
Lamp(Optional)
SUGGESTIONS ON FOOD STORAGE
.......................
7
REPLACEMENT OF
DOOR OPENING TYPE
...............................................
8
Precaution
How to
CLEANING
Replace
the Door
Opening Type
.................................................................
GENERAL INFORMATION
LAMP REPLACEMENT
........................................
.............................................
IMPORTANT WARNINGS
..........................................
BEFORE CALLING FOR SERVICE
...........................
10
10
11
11
12
242, 282-3828JD8209G
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT
CARE, AND UTILIZES THE LAT-
EST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH IT'S PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR
REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR
INSTALLATION, OPERATION AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
INSTALLATION
SELECT A GOOD LOCATION
1. Place your
2. Avoid
direct
refrigerator
the
placing
sunlight
or
where it is easy to
refrigerator
near
NEXT
1.
use.
moisture.
vibrations, the refrigerator
compensate for
the
3. Connect the power
unevenness
the ice cube
box,
supply
cord
(or plug) to the
appliances
outlet. Don't double up with other
on the same outlet.
4. Prior to use, let the
refrigerator
run
for 2-3
hours.
Check the flow of cold air in the freezer
must be
leveling screw(s)
as
evaporating tray, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
partment
level.
adjust
during shipping
refrigerator thoroughly.
cover
properly around your refrigerator to ensure efficient operation.
If your refrigerator is placed in a recessed area
in the wall, allow at least 10 inch (25 cm) or
greater clearance above the refrigerator and 2
inches (5 cm) or more from the wall.
The refrigerator should be elevated 1 inch
(2.5 cm) from the floor, especially if it is
carpeted.
If necessary,
off all dust accumulated
2. Install accessories such
3. Air must circulate
4. To avoid
Wipe
and clean your
heat sources,
to
ensure
place.
refrigerator
Your
to
of the floor.
To close the doors
easily, the front should be
slightly higher than the rear.
Leveling screw(s) can be turned easily by
tipping the cabinet slightly.
Turn the leveling screw(s) clockwise to raise the
refrigerator, counterclockwise to lower it.
2
is
proper
now
cooling
ready
for
com-
has taken
use.
FEATURE CHART
"
GR-242
FREEZER
COMPARTMENT
Freezer
Temperature
Control Dial
Freezer Shelf
Ice
Tray
Freezer Door Rack
Ice Cube Box
REFRIGERATOR
COMPARTMENT
Egg Storage
Rack
Refrigerator
Door
Refrigerator Temperature
Control Dial
Lamp
Rack
Shelves
Vegetable Drawer
Used to keep fruits
and vegetables, etc.
fresh and crisp.
Leveling
3
Screws
FEATURES CHART
"
GR-282
FREEZER
COMPARTMENT
Freezer
Temperature
Control Dial
Freezer Shelf
Ice
Tray
Freezer Door Rac
Ice Cube Box
REFRIGERATOR
COMPARTMENT
Egg Storage
Rack
Refrigerator
Doo
Refrigerator Temperature
Control Dial
Lamp
Tray Meat
(Optional)
Rack
Shelves
(Option: 2 or 3)
Tray meat and
2 shelves
or
No
tray
meat
and 3 shelves.
Leveling
Vegetable Drawer
Used to keep fruits
and vegetables, etc.
fresh and crisp.
4
Screws
OPERATIONS
STARTING
When your
prior
If
to
refrigerator is
filling it with fresh
is
operation
first
or
interrupted,
installed, allow it
2-3 hours to stabilize at normal
operating temperatures
frozen foods.
wait 5 minutes before
restarting.
TEMPERATURE CONTROL
FREEZER
Your refrigerator has two dials that let you regulate
the temperature in the freezer and refrigerator
REFRIGERATOR
compartments.
Initially,
COLD
COLDEST
dials
are
set at
mid-point.
For colder
temperatures, adjust each dial to
"COLDEST", and for warmer temperatures, adjust
each dial to "COLD"
COLD
position.
COLDEST
ICE MAKING
To make ice
cubes, fill the ice tray with
water and
place
it in the
freezer.
To
remove
To
ice
cubes, hold the tray
remove
TIP twisting.
TRAY MEAT
ice cubes
at its ends and twist
easily,
run
water
on
the
gently.
tray before
(optional)
When the door is
opened,
the
warmer
air don't influence in the
tray
meat. So you
can
store food
more
fresh in it.
The shelf and inserted
tray
meat must be
placed
at its
position
if it is
moved, the tray
meat can't fill the
role of it.
DEFROSTING
Defrosting
takes
place automatically.
The defrosted water flows down to the
refrigerator
and is
evaporating tray
evaporated automatically.
5
which located in the lower back side of the
OPERATIONS
F.I.R
LAMP(OPTIONAL)
Feature
?
Far Infrared
its
?
emitted from Far Infrared
Rays
form without
original
By increasing
Ray Lamp
restrains the
dryness
of the foods and
keeps
transforming.
the nucleic
acid, Far Infrared Rays also keeps the
taste and the smell of the food
long
time.
More effective food
?
It is useful to
salt
storage
storage the food without condiment
such
as
keep
in the low
or
sugar, and the food needed to
temperature among the raw food
with
no heating or no disinfection.
-(Sliced) Raw Fish, Meat, Poultry and
?
It is useful to
F.I.R's the
the
keep
original
restraining excessive
overripe of the foods.
-Vegetable with spices, Yogurt,
?
It is useful to
-Boiled
Egg,
so on
taste of the food
by
fermentation and
and
so on
storage the foods unsuited in the Freezer among the foods cooked
Bamboo Shoots, Vegetable for condiment, and so on
or
gone bad
easily.
Operating
?
When the
refrigerator begins to operate, F.I.R
on. During the refrigerator's operating,
the on and off of the F.I.R Lamp is automatically
controlled by the refrigerator inner temperature.
Therefore it is not necessary to handle F.I.R Lamp.
Lamp
?
F.I.R
turns
Lamp
is coated with
vest results of F.I.R
?
If F.I.R
Lamp
special
materials for the
Lamp.
is veiled
covered, F.I.R Lamp's
or
effect decreases.
?
?
If you storage the foods wrapped in the vinyl or
wrapper, not in the vessel with lid, the foods will
get more effective results of F.I.R.
If you want to check F.I.R Lamp operation, push the door switch in the
check the light of the uncoated part of the F.I.R Lamp and socket.
CAUTION
?
During
F.I.R
with the
Lamp operation, don't touch
high temperature of its surface
6
F.I.R
Lamp
refrigerator compartment
because of
burning
your
and
fingers
SUGGESTIONS ON FOOD STORAGE
STORING FOOD
Store fresh food in the
in
refrigerator compartment.
Do not store food which goes bad
Allow hot food to cool
to
higher
How food is frozen and thawed is
an
important
factor
its freshness and flavor.
maintaining
prior
to
easily
at low
storing. Placing
temperatures, such
hot food in the
as
bananas, pineapples, and melons.
refrigerator
could
spoil
other
food, and lead
electric bills!
When
storing, cover food with vinyl wrap or store
evaporating, and helps food to keep its taste and
in
a
container with
Do not block air vents with food. Smooth circulation of chilled air
Do not open the door
tures to rise.
frequently. Opening
a
lid. This
prevents moisture from
nutrients.
the door lets
warm
keeps refrigerator temperatures
air enter the
even.
refrigerator, causing tempera-
FREEZER COMPARTMENT
Do not store bottles in the freezer
compartment
-
Do not refreeze food that has been thawed. This
When
storing
frozen food like ice
cream
for
a
they
may break when frozen.
causes
loss of taste and nutrition.
long period, place
it
on
the freezer
shelf,
not in the door
rack.
REFRIGERATOR COMPARTMENT
Avoid
placing
moist food
deep
inside
refrigerator shelves,
it could freeze upon direct contact with chilled
air.
Always
clean food
food should be
When
prior to refrigeration. Vegetables and fruits should
wiped clean, to prevent adjacent food from spoiling.
storing eggs in their storage rack,
position, which keeps them fresh longer.
ensure
that
they
7
are
be washed and
fresh, and always
wiped,
and
store them in
a
packed
up-right
REPLACEMENT OF DOOR OPENING TYPE
-
PRECAUTION
1. Before
replacing
the door
opening type,
first of
Converting
Door is
Optional
all, you should
or trays, and so
take out foodstuffs and accessories like shelves
which
on
are
2. Use the '+'
or remove
not fixed in the
refrigerator.
Driver, Bolt Driver, Torque Wrench
or
Spanner
to fix
the bolt.
3. Be careful not to fall down the
refrigerator in disassembling or
assembling the Hinge Lower and the Adjustable Screw Asm.
Don't lay the refrigerator down in working with it, it will cause to
get
out of order.
4. Be careful not to
the freezer
5. This
or
the
drop the door in disassembling
refrigerator door.
refrigerator, according
right or the left.
to the install
position
or
assembling
or
user's
liking,
can
be used
as
the
type of opening
from the
HOW TO REPLACE THE DOOR OPENING TYPE
from the left-opening type to right
(when converting
1
Separate the Cap (1)
and
Hinge Upper (2).
2
opening type)
Separating the
Freezer Door
(3).
3
2
1
3
Separating the Hinge-C (4)
Refrigerator
Door
and the
4
(5).
5
Separating the Hinge
Lower
(6).
6
4
8
REPLACEMENT OF DOOR OPENING TYPE
Move the Position of
5 Assembly (7).
Adjustable
Screw
6
Assemble the
Hinge
Lower
(6).
7
6
Move the
(8), Bracket (9)
Cap
7 Refrigerator
Door.
of the
8
Move the
Cap (10)
Hinge-C (4).
and Assemble the
10
8
4
9
9
Assembe the Door
Stopper-F (11)
for
Right
10
Opening Type.
Move the Cap (12) and Assemble the
Freezer Door (3).
3
3
12
11
11
Move the Pin Position
5
(13)
of the
Hinge
Assemble the
12 Cap (1).
Upper.
Hinge Upper (2)
and the
13
2
1
9
CLEANING
It is
that your
important
refrigerator
be
kept
clean to
INTERIOR PARTS
Wash compartment shelves,
racks, storage trays and magnetic door seals
prevent undesirable odors. Spilled food should be
door
wiped up immediately, since
plastic surfaces if allowed to
etc. with the
Never
use
metallic
abrasive cleaners
it may
settle.
acidify
and stain
gent and
scouring pads, brushes,
or
power cord from the wall
Always
outlet prior to cleaning in the vicinity of electrical parts (lamps, switches, controls, etc.).
up excess moisture with a sponge or
cloth to prevent water or liquid from getting
Wipe
or
Use
into any electrical part and causing a electric
shock. Do not use flammable or toxic clean-
lukewarm solution of mild soap
to clean the durable finish of your
-
detergent
refrigerator. Wipe
then dry.
interior
-
mild deter-
WARNING
hands.
INTERIOR
or a
dry.
remove
faces. Do not touch frozen surfaces with wet
or
soda solution
water. Rinse and
on
Before you clean, however, remember that damp
objects will stick or adhere to extremely cold sur-
EXTERIOR
baking
warm
coarse
strong alkaline solutions
any surface.
damp
-
a
with
a
ing liquids.
clean, damp cloth and
Regular cleaning
of the interior and
parts is recommended. If you have the No
Frost model which defrosts
automatically, leave
cleaning process.
both doors open during the entire
Disconnect the power supply, and
remove
food and
all
compartment shelves, storage trays etc.
Wash all compartments with a baking soda solution.
Rinse and
dry.
GENERAL INFORMATION
VACATION TIME
IF YOU MOVE
average length vacations, you will probably
find it best to leave the refrigerator in operation.
inside the
Place freezable items in freezer for
To avoid
Remove
During
When you
remove all
plan
the interior
thoroughly,
to
to be away for
an
longer
life.
extended
securely fasten down all loose items
refrigerator.
damaging the leveling screw(s), turn them
or
all the way into the base.
period,
food, disconnect the power cord, clean
and leave each door OPEN
ANTI-CONDENSATION PIPE
prevent odor formation.
The outside wall of the
POWER FAILURE
sometimes
get
warm,
refrigerator cabinet
especially just after
installation.
Most power failures are corrected in an hour or two
and will not affect your refrigerator temperatures.
However, you should minimize the number of door
Don't be alarmed.
This is due to the anti-condensation
which
pipe,
refrigerant to
prevent "sweating" on the
openings while the power is off. During power failures of longer duration, place a block of dry ice on
top of your frozen packages.
pumps hot
outer cabinet wall.
10
may
Anti-Condensation
Pipe
LAMP REPLACEMENT
1.
Unplug
the power cord from the outlet.
2. Remove
refrigerator shelves.
lamp by turning it
3. Remove the
counterclockwise
as
shown in the
figure
at
right.
4. Assemble in
same
reverse
specification
order of
as
disassembly. Replacement
original.
bulb must be the
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD
ABOUT GROUNDING
If
In the event of
possible,
connect the
refrigerator
vidual electrical outlet to
ances or
household
load that could
own
indi-
from
power
causing
(EARTHING)
electric short
circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.
prevent it and other appli-
lights
cause a
to its
an over-
outage.
In order to
appliance
POWER CORD REPLACEMENT
Improper
an
prevent possible electric shock, this
must be
use
grounded.
of the
grounding plug can result in an
a qualified electrician or sergrounding instructions are not
electric shock. Consult
If the supply cord is damaged, it must be replaced
by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
vice person if the
completely understood, or if you have doubts
appliance is properly grounded.
on
whether the
VERY DANGEROUS ATTRACTION
An
empty refrigerator
can
be
a
dangerous
gaskets,
attraction to children. Remove either
latches, lids
appliance,or
or
the entire door from your unused
some other action to make it
take
This
appliance
must be
grounded (earthed).
harmless.
DON'T WAIT! DO IT NOW!
Please don't stain the
area near
to door switch
with any sweet food so that ants can't
the normal operation of door switch.
Do not store inflammable
interrupt
or
11
materials, explosives
refrigerator.
chemicals in the
BEFORE CALLING FOR SERVICE
SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING
CAUSES FIRST
PROPERLY, CHECK THESE POSSIBLE
:
PROBLEM
POSSIBLE CAUSES
REFRIGERATOR DOES
Has
NOT OPERATE
Has the power cord plug been removed
from the electrical wall outlet?
REFRIGERATOR OR FREEZER
Temperature control not set on proper position.
Appliance is placed close to wall or heat source.
Warm weather-frequent door openings.
Door left open for a long time.
Large amount of foods are kept in the refrigerator.
COMPARTMENT TEMPERATURE
TOO WARM
ABNORMAL
a
house fuse blown
or
circuit breaker
tripped?
or
loosened
Refrigerator is installed in a weak or uneven place,
leveling screw needs adjusting.
Unnecessary objects placed in the back side of the
refrigerator.
NOISE(S)
or
REFRIGERATOR
Foods with
HAS ODOR
or
strong odors should be tightly covered
wrapped.
Interior needs
cleaning.
DEW FORMS ON THE
Not unusual
CABINET SURFACE
Door may have been left
You
can
find
a
during periods of high humidity.
ajar.
product label and a circuit diagram at back of
digit of 'Serial No.' on the product label.
your
appliance. Manufacturing
year and
month is first three
Example
:
Serial No.
:
8
0
1
year month
K R
Manufactured Jan. 1998.
00001
Korea Serial
If you bought your set at Saudi Arabia, refer the service center list on warranty
(service parts) at a service center. The other area request at shop.
GR-242
Rated shelf
0.65
area
Percentage running time
Quantity of ice Produced
m2
card and consult
GR-282
0.74
80%
per 24 hours
1.2
run
12
kg/
24 hr
parts list
m2
80%
1.2
kg/
24 hr
Download PDF

advertising