LG | GR-V2522SL | LG GR-V2522SL Owner’s Manual

GR-V252SL
GR-V2522SL
ENGLISH
Owner ’s Manual
REFRIGERATOR
FREEZER
Please read this manual carefully before operating
your set and retain it for future reference
P/NO : MFL60345917
www.lge.com
CONTENTS
IMPORTANT WARNINGS ................................. 3
INSTALLATION .................................................. 4
FEATURE CHART ............................................. 5
OPERATION .................................................. 6-8
Starting
Before Setting The Temperature
Control for Refrigerator Compartment
Control for Freezer Compartment
Temperature Control
Fresh Zone
Defrosting
Deodorizer (Optional)
Vitamin Kit (Optional)
SUGGESTIONS ON FOOD STORAGE ........... 9
CLEANING ........................................................ 10
GENERAL INFORMATION ............................. 10
LAMP REPLACEMENT ................................... 11
BEFORE CALLING FOR SERVICE ................ 11
2
THIS REFRIGERATOR IS MANUFACTURED WITH GREAT CARE AND UTILIZES THE
LATEST IN TECHNOLOGY.
WE ARE CONFIDENT THAT YOU WILL BE FULLY SATISFIED WITH ITS PERFORMANCE
AND RELIABILITY.
BEFORE USING YOUR REFRIGERATOR, PLEASE READ THIS BOOKLET CAREFULLY.
IT PROVIDES EXACT INSTRUCTIONS FOR INSTALLATION, OPERATION,
AND MAINTENANCE, AND ALSO SUPPLIES SOME USEFUL HINTS.
IMPORTANT WARNINGS
DO NOT USE AN EXTENSION CORD
ABOUT GROUNDING (EARTHING)
Use this appliance on a dedicated circuit; that is,
an outlet that is the only outlet on the circuit.
Overloading a circuit causes low voltage,
malfunction, possible damage to the equipment,
and poor cooling capacity.
Check your local electric code or consult a
qualified electrician if you have questions.
In the event of an electric short circuit, grounding
(earthing) reduces the risk of electric shock by
providing an escape wire for the electric current.
In order to prevent possible electric shock, this
appliance must be grounded.
Improper use of the grounding plug can result in
an electric shock. Consult a qualified electrician or
service person if the grounding instructions are not
completely understood, or if you have doubts on
whether the appliance is properly grounded.
ACCESSIBILITY SUPPLY PLUG
The refrigerator-freezer should be so positioned
that the supply plug is accessible for quick
disconnection if an accident happens.
DO NOT MODIFY OR EXTEND THE
POWER CORD LENGTH
It will cause electric shock
or fire.
SUPPLY CORD REPLACEMENT
If the supply cord is damaged, it must be replaced
by the manufacturer or replacement or a similarly
qualified person in order to avoid a hazard.
VERY DANGEROUS ATTRACTION
This appliance must be grounded (earthed).
DON'T WAIT! DO IT NOW!
An empty refrigerator can be a dangerous
attraction to children. Remove either gaskets,
latches, lids or the entire door from your unused
appliance,or take some other action to make it
harmless.
Do not store inflammable materials, explosives,
or chemicals in the refrigerator.
WARNING
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
Children should be supervised to ensure that they do not play with the appliance.
Disposal of the old appliance
This appliance contains fluid (refrigerant, lubricant) and is made of parts and materials which are
reusable and/or recyclable.
All the important materials should be sent to the collection center of waste material and can be
reused after rework (recycling). For take back, please contact with the local agency.
3
DISPOSAL OF YOUR OLD APPLIANCE
1. When this crossed-out wheeled bin symbol is attached to a product it
means the product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by
the government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential
negative consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please
contact your city office, waste disposal service or the shop where you
purchased the product.
5. Flammable insulation blowing gases should be disposed appropriately.
Take the cabinet and doors to a recovery plant for flammable insulation
blowing gases.
• Information of fluorinated greenhouse gases
used as refrigerant of this refrigerator.
Chemical Name Composition of Gases
R-134a
100% HFC-134a
Total GWP (kg CO2-eq)
1300
INSTALLATION
SELECT A GOOD LOCATION
NEXT
1. Wipe off all dust accumulated during shipping
and clean your refrigerator thoroughly.
1. Place your refrigerator where it is easy to use.
2. Avoid placing the refrigerator near heat sources,
direct sunlight or moisture.
2. Install accessories such as the ice cube box,
evaporating tray cover, etc., in their proper
places. They are packed together to prevent
possible damage during shipping.
3. To ensure proper air circulation around the
fridge-freezer, please maintain sufficient
space on both the sides as well as top and
maintain at least 2 inches (5 cm) from the
rear wall.
3. Connect the power supply cord (or plug) to the
outlet. Don't double up with other appliances
on the same outlet.
4. To avoid vibrations, the refrigerator must
be level.
Assemble refrigerator Leg to Hinge Lower pin by
rotating it counter clock wise (Dispenser model).
If necessary, adjust the leveling screw(s) to
compensate for unevenness of the floor.
To close the doors easily, the front should be
slightly higher than the rear.
Leveling screw(s) can be turned easily by
tipping the cabinet slightly.
Turn the leveling screw(s) clockwise to raise the
refrigerator, counterclockwise to lower it.
4. Prior to use, let the refrigerator run for 2-3
hours.
Check the flow of cold air in the freezer compartment to ensure proper cooling has taken
place.
Your refrigerator is now ready for use.
4
FEATURE CHART
FREEZER
COMPARTMENT
Twisting Ice Serve
(Option) or General
Type Ice Tray
Freezer Door Rack
Freezer Temperature
Control Dial
Freezer Shelf
REFRIGERATOR
COMPARTMENT
Egg Storage Rack
Movable Rack
Fresh Zone
Refrigerator Temperature
Control Knob
Shelves (Optional)
Lamp
Deodorizer
(Optional)
Refrigerator Door
Rack (Optional)
Vitamin Kit
(Optional)
Vegetable Drawer
Used to keep fruits
and vegetables, etc.
fresh and crisp.
NO
TE
Leveling Screws
All parts shown may not be included with every model.
5
OPERATIONS
STARTING
When your refrigerator is first installed, allow it 2-3 hours to stabilize at normal operating temperatures
prior to filling it with fresh or frozen foods.
If operation is interrupted, allow 5 minutes delay before restarting.
BEFORE SETTING THE TEMPERATURE
This refrigerator has one temperature control knob for the refrigerator compartment and one temperature
control dial for the freezer compartment.
The default setting of the temperature control knob for the refrigerator compartment is 'MID'.
The default setting of the temperature control dial for the freezer compartment is '2' or '3'.
CONTROLS FOR REFRIGERATOR COMPARTMENT
MAX
For colder temperatures, adjust the control knob to MAX, and for
warmer temperatures, adjust the control knob to MIN position
MID
MIN
TEMPERATURE CONTROL
CONTROLS FOR FREEZER COMPARTMENT
Determine which type Temperature Control you have.
<A Type>
<B Type>
TEMP. CONTROL - 1, 2, 3, 4, 5, 6, 7
Setting at "7", the freezer compartment becomes colder. But the refrigerator compartment becomes
warmer because less cold air flows into the refrigerator compartment.
In cold weather the unit operates less and the freezer compartment has a tendency to warm up.
For colder freezer, turn the TEMP. CONTROL to "6"~"7".
If you take a lot of foods in the freezer or open its door frequently, its temperature is apt to be somewhat
higher. In this case, set the TEMP. CONTROL dial between 6 and 7 to cool it. Return the TEMP. CONTROL
dial to the original position to cut down the consumption of energy.
In hot weather or to put much foods in the refrigerator compartment, the refrigerator compartment
has a tendency to warm up.
For colder refrigerator, turn the TEMP.CONTROL to "2"~"3" to direct more cold air into the refrigerator
compartment.
Setting at "6"~"7" of the TEMP.CONTROL, the refrigerator compartment will not be cold enough.
6
OPERATIONS
ICE MAKING
Determine which type ice-making system you have.
Ice Trays
General Type
To make ice cubes, fill the ice tray with water and
place it on the ice cube box. Then insert the ice
cube box in the freezer compartment.
Ice Cube Box
To remove ice cubes, hold the tray at its ends and
twist gently.
Twisting Ice Serve Type
To make ice cubes, fill the ice tray with water and
insert in its position.
To remove ice cubes, hold the knob of the tray and
turn gently.. Then, ice cubes drop in the ice cube
box.
You can remove the Twisting Ice Serve to make the
freezer compartment larger.
You should remove the ice Trays and Ice Cube Box
first, then pull the frame out toward the right side.
7
Ice Trays
Ice Cube Box
Frame
OPERATIONS
FRESH ZONE
When the door is opened, the warmer air doesn't influence
the fresh meat. You can keep food fresher in it.
DEFROSTING
DEODORIZER
Defrosting takes place automatically.
The defrosted water flows down to the evaporating tray which is located in the lower back side of the
refrigerator and is evaporated automatically.
DEODORIZER (OPTIONAL)
By using a catalyst, deodorizing performance is guaranteed.
Unpleasant odor of food in the fresh food compartment is deodorized with no harm to you and the food.
How to use
Do not prick the deodorizer with a sharp tip because the deodorizing catalyst may be damaged.
When storing food with a strong odor, wrap it or store it in a container with a lid because the odor may be
passed on to other foods.
MI
ITA N
V
T
KI
T
KI
V
VITAMIN KIT (OPTIONAL)
It contains anti-oxydant that is able to avoid
oxidation process in order to make the fruits and
vegetables fresh for longer time.
MIN
ITA
This part contains anti-oxydant substance that do not to eat.
Opening and closing the door too much often can reduce its lifetime.
8
SUGGESTIONS ON FOOD STORAGE
STORING FOOD
Store fresh food in the refrigerator compartment. How food is frozen and thawed is an important factor
in maintaining its freshness and flavor.
Do not store food which goes bad easily at low temperatures, such as bananas, pineapples, and melons.
Allow hot food to cool prior to storing. Placing hot food in the refrigerator could spoil other food and lead
to higher electric bills!
When storing, cover food with vinyl wrap or store in a container with a lid. This prevents moisture from
evaporating and helps food to keep its taste and nutrients.
Do not block air vents with food. Smooth circulation of chilled air keeps refrigerator temperatures even.
Do not open the door frequently. Opening the door lets warm air enter the refrigerator, causing temperatures to rise.
To adjust the temperature control easily, do not store food near the temperature control dial.
It is recomended to load food at least 15mm against freezer wall, it will keep good air circulation in the
the freezer compartment.
FREEZER COMPARTMENT
Do not store bottles in the freezer compartment - they may break when frozen.
Do not refreeze food that has been thawed. This deteriorates taste and nutrition.
When storing frozen food like ice cream for a long period, place it on the freezer shelf,
not in the door rack.
REFRIGERATOR COMPARTMENT
Avoid placing moist food deep inside refrigerator shelves, it could freeze upon direct contact
with chilled air.
Always clean food prior to refrigeration. Vegetables and fruits should be washed and wiped, and packed
food should be wiped clean to prevent adjacent food from spoiling.
When storing eggs in their storage rack, ensure that they are fresh. Always store them in a upright
position, which keeps them fresh longer.
9
CLEANING
INTERIOR PARTS - Wash compartment shelves,
door racks, storage trays, and magnetic door seals
etc. with the baking soda solution or a mild detergent and warm water. Rinse and dry.
It is important that your refrigerator be kept clean to
prevent undesirable odors. Spilled food should be
wiped up immediately, since it may acidify and stain
plastic surfaces if allowed to settle.
Never use metallic scouring pads, brushes, coarse
abrasive cleaners, or strong alkaline solutions on
any surface.
WARNING
Always remove power cord from the wall
outlet prior to cleaning in the vicinity of electrical parts (lamps, switches, controls, etc.).
Wipe up excess moisture with a sponge or
cloth to prevent water or liquid from getting
into any electrical part and causing a electric
shock. Do not use flammable or toxic cleaning liquids.
Before you clean, remember that damp objects will
stick or adhere to extremely cold surfaces. Do not
touch frozen surfaces with wet or damp hands.
EXTERIOR -Use a lukewarm solution of mild soap
or detergent to clean the durable finish of your
refrigerator. Wipe with a clean, damp cloth and
then dry.
INTERIOR - Regular cleaning of the interior and
interior parts is recommended. If you have the No
Frost model which defrosts automatically, leave
both doors open during the entire cleaning process.
Disconnect the power supply, and remove food and
all compartment shelves, storage trays etc.
Wash all compartments with a baking soda
solution. Rinse and dry.
GENERAL INFORMATION
VACATION TIME
IF YOU MOVE
During average length vacations, you will probably
find it best to leave the refrigerator in operation.
Place freezable items in freezer for longer life.
When you plan to be away for an extended period,
remove all food, disconnect the power cord, clean
the interior thoroughly, and leave each door OPEN
to prevent odor formation.
If you move, empty the refrigerator (freezer)
completely and wash a mild solution of baking soda
and water. (2 TBS soda to 1 quart water)
Be sure the soda is completely dissolved to avoid
scratching the inside of the refrigerator (freezer).
Secure any loose items, such as racks, bins, ice
trays, etc. Do not try to move a loaded refrigerator.
POWER FAILURE
ANTI-CONDENSATION PIPE
Most power failures are corrected in an hour or two
and will not affect your refrigerator temperatures.
However, you should minimize the number of door
openings while the power is off. During power
failures of longer duration, place a block of dry ice
on top of your frozen packages.
The outside wall of the refrigerator cabinet may
sometimes get warm, especially just after
installation.
Don't be alarmed.
Anti-Condensation
Pipe
This is due to the
anti-condensation pipe,
which pumps hot refrigerant
to prevent sweating on the
outer cabinet wall.
DRY ICE WARNING
When using dry ice, provide adequate ventilation.
Dry ice is frozen carbon dioxide (CO2).
When it vaporizes, it can displace oxygen, causing
dizziness, light-headedness, unconsciousness, and
death by suffocation.
Open a window and do not breathe the vapors.
10
LAMP REPLACEMENT
1. Unplug the power cord from the outlet.
2. Remove refrigerator shelves.
3. To remove the lamp cover, insert a slotted driver at the one of
under hole of the lamp cover and pull it outforwards.
4. Turn the lamp counterclockwise.
5. Assemble in reverse order of disassembly.
Replacement bulb must be the same specification as original.
BEFORE CALLING FOR SERVICE
SERVICE CALLS CAN OFTEN BE AVOIDED!
IF YOU FEEL YOUR REFRIGERATOR IS NOT OPERATING PROPERLY, CHECK THESE POSSIBLE
CAUSES FIRST :
PROBLEM
POSSIBLE CAUSES
REFRIGERATOR DOES
NOT OPERATE
●
REFRIGERATOR OR FREEZER
COMPARTMENT TEMPERATURE
TOO WARM
●
●
●
●
●
●
ABNORMAL NOISE(S)
●
●
REFRIGERATOR
HAS ODOR
●
●
DEW FORMS ON THE
CABINET SURFACE
●
●
Has a house fuse blown or circuit breaker tripped?
Has the power cord plug been removed or loosened
from the electrical wall outlet?
Temperature control not set on proper position.
Appliance is placed close to wall or heat source.
Warm weather-frequent door openings.
Door left open for a long time.
Large amount of foods are kept in the refrigerator.
Refrigerator is installed in a weak or uneven place,
or leveling screw needs adjusting.
Unnecessary objects placed behind the refrigerator.
Foods with strong odors should be tightly covered
or wrapped.
Interior needs cleaning.
Not unusual during periods of high humidity.
Door may have been left ajar.
11
P/No. MFL60345917
Download PDF

advertising