LG LH-CX643W Owner's manual

LG LH-CX643W Owner's manual
DVD/VCR COMBI RECEIVER
Combi Receiver
System
OWNER'S MANUAL
MODEL: LH-CX643
(Main Unit: LH-CX643W
Speakers: LHS-CX643T, LHS-CX643C,
LHS-CX643W)
CD-R/RW
PAL
Before
connecting up, operating
please
read this instruction booklet
or
repairing this product,
carefully and completely.
CAUTION
Warning: To reduce the risk of electric
shock, do not remove the cover or back
of this product. There are no user-serviceable parts inside. Refer servicing to
qualified service personnel.
Warning: To reduce the risk of fire or
electric shock, do not expose this product to dripping or splashing water, rain,
or moisture. Do not place objects filled
with water such as vases, on the product.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN
CASE OF 625 PROGRESSIVE SCAN PICTURE
PROBLEMS, IT IS ECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE 'STANDARD
DEFINITION' OUTPUT. IF THERE ARE QUESTIONS
REGARDING OUR TV SET COMPATIBILITY WITH
THIS MODEL 625p DVD PLAYER, PLEASE CONTACT OUR CUSTOMER SERVICE CENTER.
SERIAL NUMBER:
You can find the serial number on the back of the unit.
This number is unique to this unit and not available to
others. You should record requested information here
and retain this guide as a permanent record of your
purchase.
Model No.
Serial No.
Date of
Warning: This digital video disc player
employs a laser system. Use of controls,
adjustments, or the performance of procedures other than those specified herein may result in hazardous radiation
exposure.
Warning: To prevent direct exposure to
laser beam, do not open the enclosure.
Visible laser radiation when open.
Never stare
laser beam.
Warning:
directly
into the
Caution: Do not install this product in a
confined space such as a book case or
similar unit.
This
product
is manufactured to
the radio interference
comply with
requirements of EEC
DIRECTIVE 89/336/EEC, 93/68/EEC and
73/23/EEC.
Notes
on
Copyrights:
It is forbidden by law to copy, broadcast, show,
broadcast via cable, play in public, or rent copyrighted
material without permission. This product features the
copy protection function developed by Macrovision.
Copy protection signals are recorded on some discs.
When recording and playing the pictures of these
discs picture noise will appear. This product incorporates copyright protection technology that is protected
by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise
authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
2
______________________________
______________________________
Purchase_________________________
GeneralFeatures.......................30
Contents
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................8
MovingtoanotherTITLE................30
.30
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................30
.30
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.31
SlowMotion.........................31
Random............................31
.
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B.........................31
Repeat.............................31
3DSurround.........................31
TimeSearch.........................31
Zoom..............................32
MarkerSearch.......................32
RemoteControl.........................9
RearPanel............................10
SpecialDVDFeatures...................32
.11
CameraAngle.......................32
.32
ChangingtheAudioLanguage
InstallationandSetup
.
.
.
.
.
.
.
.
.
ConnectingtoaTV......................11
Accessory Audio/Video (A/V) Connections to
DVD/VCR Combi receiver .................12
RadioAerialConnections................12
SpeakerSystemConnection..............13
SpeakerPositioning.....................14
Mini Glossary for Audio Stream &
Surroundmode.........................15
SoundMode...........................15
.16-20
BeforeOperation-VCRpart.
.16
TuninginavideochannelonyourTV
.16
Using your receiver for the very first time
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SettingtheclockManually................17
Tosetthecoloursystem.................17
Howtousethemainmenu..............18
.18
Tuning in TV stations Automatically
.19
TuninginTVstationsManually
.20
ChangingtheorderofTVstations.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
DeletingTVstations...................20
.21-25
BeforeOperation-DVDpart.
On-ScreenDisplay......................21
InitialSettings.......................22-25
GeneralOperation....................22
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................22
MenuLanguage....................22
DiscAudio/Subtitle/Menu.
.22
DISPLAY...........................23
.
.
.
.
.
.
.
.
.
.
TVAspect.........................23
DisplayMode.......................23
ProgressiveScan...................23
AUDIO.............................23
TitleMenu..........................32
DiscMenu..........................32
.
.
.
.
.
.
.
.
.
.
Subtitles............................32
DVDAudioDiscs.........................33
.34
PlayinganAudioCDorMP3/WMADisc
.35
AudioCDandMP3/WMADiscFeatures
Pause..............................35
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................35
RepeatTrack/All/Off...................35
Search.............................35
Random............................35
RepeatA-B.........................35
3DSurround.........................35
ProgrammedPlayback.....................36
.36
RepeatProgrammedTracks.
.36
ErasingaTrackfromProgramList
.36
Erasing the Complete Program List
ViewingaJPEGDisc......................37
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................37
StillPicture..........................37
MovingtoanotherFile.................37
Zoom..............................37
Torotatepicture......................37
To listen to MP3/WMA music watching picture
.37
SpeakerSetup.........................38
.39
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................39
PlayingaDivXMovieDisc................40
Additional Features-VCR part
.
.
.
.
.
.
.
.
.
.41-42
.
OnScreenDisplay....................41
TapeCounterMemoryStop.............41
.41
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............42
.
.
.
.
.
.
.
.
.
.
5.1SpeakerSetup..................23
.23
DynamicRangeControl(DRC).
AdditionalFeatures.....................43
Vocal.............................23
OTHERS...........................24
PBC.............................24
ScreenSaver........................43
.
.
.
.
.
.
.
AutoPlay..........................24
DivX(R)VOD.......................24
LOCK(ParentalControl)................25
Rating............................25
.25
Password(SecurityCode).
CountryCode......................25
.
.
.
.
.
.
.
.
.
.
.
LastSceneMemory...................43
VideoModeSetting...................43
CopyingfromDVDtoVCR................44
.44
Recording from another video recorder
RadioOperation........................45
.45
PresettingtheRadioStations
ListeningtotheRadio..................45
.
.
Playingatape.......................26-30
.26
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.26
.27
InstantTimerRecording(ITR).
Timer recording using On Screen Display
.28
.29
IfTimerrecordeventsOverlap
.29
Change (Deleting) the Timer Programme
.30-31
PlayingaDVDorVideoCD.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
ToCleartheStoredRadioStations
.
.
.
.
.
.
.
.
.
.
.45
.46
.46
Mute...............................46
TuningintoaStationManually
Tuning into a Station Automatically
.
Operation....................26
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reference....................47
LanguageCodes.......................47
CountryCodes.........................47
Troubleshooting.....................48-49
Specification........................50-51
.
3
Introduction
About the
To
proper use of this product, please read this
owner's manual carefully and retain for future
Symbol Display
ensure
reference.
"
"
may appear on your TV
and indicates that the function
owner's manual is not
This manual
provides
information
on
the
operation
display during operation
explained in this
available on that specific DVD
video disc.
and maintenance of your DVD player. Should the unit
require service, contact an authorized service
Notes
Discs
on
location.
Symbol
Handling
Used in this Manual
Discs
Do not touch the
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
disc
The
by
the
playback side of the disc. Hold
edges so that fingerprints do not get
the surface. Never stick paper
or
tape
on
the
on
the disc.
of
electric shock.
The exclamation
point alerts you to the presimportant operating and maintenance
servicing instructions.
ence
/
of
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
making
the task easier.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and
never leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
of the following symbols
represented by the sym-
one
to the disc
bol.
DVD-V
DVD and finalized DVD±R/RW
DVD-A
DVD Audio discs
VCD
Video CDs
CD
Audio CDs
MP3
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
MP3 Discs
spray intended for older
WMA
WMA Discs
JPEG
JPEG Discs
Setting
DivX Discs
You must select one of your output
VCR) to view on the TV screen.
DivX
the
vinyl
records.
Source
Output
sources
(DVD
or
If you want to view output source of DVD deck:
Press DVD on the remote or DVD/VCR on the front panel
?
until DVD indicator
source
on
the front
of DVD deck is viewed
panel lights
on
the TV
and
output
screen.
If you want to view output source of VCR deck:
Press VCR on the remote or DVD/VCR on the front panel
?
until VCR indicator
source
4
on
the front
of VCR deck is viewed
panel lights
on
the TV
and
output
screen.
of
Types
Discs
Playable
Regional
code
This DVD
player is designed and manufacplayback of region "2" encoded DVD
software. This unit can play only DVD discs
DVD
tured for
(8cm/12cmdisc)
labeled "2"
DVD audio discs
(8cm/12cmdisc)
Notes
Video CD
(VCD)
(8cm/12cmdisc)
?
on
or
"ALL".
Regional
Codes
Most DVD discs have
numbers in it
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
Audio CD
(8cm/12cmdisc)
?
In addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
2
player's regional
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears on the TV screen.
contains audio titles, MP3, WMA, and/or JPEG files.
Notes:
?
Depending
ment
or
on
the conditions of the
the CD-R/RW
recording equip-
DVD -R, DVD +R,
disc itself, some CD-R/RW
(or
DVD
-
RW, DVD +RW)
(or
DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be
?
played
on
the unit.
Do not attach any seal or label to either side
or the recorded side) of a disc.
(the
labeled side
?
Do not
use
shaped
or
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
DVDs and Video CDs
Notes
on
Some
playback operations
of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according
to disc content
manufacturer, therefore
not be available
or
designed by the software
playback features may
some
other functions may be added.
Manufactured under license from
Dolby Laboratories.
Logic", and the double-D symbol are
trademarks of Dolby Laboratories. Confidential
Unpublished works. Copyright 1992-1997 Dolby
Laboratories. All rights reserved.
"Dolby",
"Pro
Manufactured under license from
Digital
Theater
Inc. US Pat. No's. 5,451,942; 5,956,674;
5,974,380; 5,978,762; 6,487,535 and other US and
Systems,
world-wide
"DTS
Digital
Digital
patents issued and pending. "DTS" and
Digital
Surround"
Theater
Theater
registered trademarks of
Copyright 1996, 2003
Inc. All rights reserved.
are
Systems,
Systems,
Inc.
5
PBC:
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
Disc-related terms
DVD±R/DVD±RW
DVD -R and DVD +R
are
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable media,
are
only
two standards for
meaning the DVD content can be
Single-sided discs can hold
erased and re-recorded.
4.38
Gigabytes
much. There
and double-sided discs hold twice
are no
dual
layer single
version 2.0 disc formats. PBC allows you to interact
system via menus, search functions, or other
with the
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
CDs.
as
sided recordable
(DVD video discs only)
generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
Title
discs.
A title is
VCD
and cast interviews could be title 3. Each title is
(Video CD)
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
along
with
stereo sound.
quality
MPEG
a
reference number
an
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
audio.
Chapter (DVD video discs only)
chapter is a segment of a title such
film
or one
interview in
a
popular compression format used for digital
files that yields very high near-CD quality.
WMA
developed by
Microsoft
type of coding / decoding
Corp.
audio discs
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
a compressed
images with no limit
DivX
name
which is based
of
on
a
the
revolutionary
new
using
new
video codec
MPEG-4
standard for video.You will be able
only)
accompanying
feature
con-
num-
easily.
(VCD)
video CD with PBC
(playback control) functions,
pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
and still
compression
to play DivX
this DVD/CD/VCR receiver.
A distinct element of audiovisual information, such
the picture or sound track for a specific language
(DVD),
or a
track of video
of audio.
as
musical
Each track is
piece on a video or audio CD.
assigned a track number, enabling you
to locate the track you want. DVD discs allow
6
a
Track
DivX is the
movies
or
you to locate it
enabling
moving pictures
Joint Pictures
in
is
or
Scene
On
JPEG
chapter
additional feature content, or music
album.Each group is assigned a group reference
tent
ber
Windows media audio file. A
as a scene
may not be recorded.
The main audio content
a
series. Each
you to locate it
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
Group (DVD
MP3
MP3 is
enabling
A
MPEG is
audio
assigned
easily.
(with multiple angles)
one
and several tracks
Front Panel
OPEN/CLOSE
Opens
or
closes the disc
(Z)
tray.
PAUSE/STEP( X / C )
Remote Sensor
Point the DVD/VCR Combi receiver
Pause
of
playback
tape
a
Press
repeatedly
Tray (DVD deck)
Insert
a
disc in the DVD
or a
or
VCR deck
remote control here.
Disc
EJECT(Z)
tape in the VCR deck.
the
Ejects
for
temporarily.
frame-by-frame playback.
( x)
tape.
STOP
disc here.
Stops playback
of
a
disc
PLAY
To
back
play
recorded
a
tape
or
(B)
disc.
or
REC/ITR ( z )
normally or to
Timer Recording.
To record
activate Instant
Cassette
TUNER FM/AM
To
change
Compartment
(VCR deck)
between AM
Insert
and FM bands.
Display
video cassette here.
a
window
DVD/VCR
Select
on
(output select)
of your output sources to view
the TV screen between DVD and VCR.
one
PROG./PRESET
(v/V)
through
to control tracking during playing
To
scan
up
or
down
memorized channels
back
To tune in the desired station
a
or
tape (VCR mode).
(Radio Mode).
INPUT SELECT
Select the VCR deck's
VIDEO/AUDIO
source
(Tuner, A1, A2)
(Left/Right)
Connect the audio/video
output of an external
system, TV/Monitor, Another VCR).
source
( S/Q )
previous chapter/track.
Reverse SKIP/SCAN
DVD: Go to
beginning
of current
chapter/track
or
to
Press and hold for two seconds for
VCR: Rewinds the
tape during the STOP mode
or
a
for fast
fast
reverse
reverse
picture
search.
search.
Forward SKIP/SCAN
DVD: Go to NEXT
chapter/track.
( R/ T )
Press and hold for two seconds for
a
fast
forward search.
VCR: Advances the
tape during the STOP mode
forward
or
picture
for fast
search.
VOLUME Control
STANDBY/ON
Switches the DVD/VCR Combi receiver ON and OFF.
Turn the knob clockwise to increase volume,
counterclockwise to decrease the volume.
7
Display Window
Indicates current
A disc is loaded in the DVD deck.
audio stream.
loaded in the DVD
(Lights
when
a
disc is
deck.)
WMA disc inserted
DVD/VCR Combi receiver is in VCR timer
mode
Indicates the unit is
radio mode.
or a
VCR timer
recording
is
recording
programmed.
DVD to VCR copy is in progress.
DVD/VCR Combi receiver is
Indicates current
surround mode.
Recording
a
tape.
Indicates the unit is
playing
back
a
tape
recorded in Hi-Fi.
MUTE indicator
Programmed
playback active
A cassette
is loaded
in the VCR
deck.
DIGITAL
PCM WMA
PHOTO
dts
VCD
ST
II PROG
PROLOGIC
RADIO
CHP/TRK
Hi-Fi
DVD
MP3 TV
RPTALLAB
Total
Indicates current
track number
chapter,
or
channel number.
Indicates the unit is TV mode.
MP3 disc inserted.
Repeat playback
mode indicators.
VCD disc inserted.
DVD disc inserted.
Lights
up when
a
JPEG disc inserted.
8
stereo broadcast is
being
received in radio mode.
playing time/Elapsed time/
Frequency/remaining time/ Current
deck status/Surround mode/Volume
etc. indicators.
Remote Control
POWER
OPEN/CLOSE,
Switches DVD/VCR Combi receiver ON and
-
OFF.
-
0-9 numerical buttons
Selects numbered
in
options
a menu.
EJECT
OPEN/CLOSE
POWER
PROGRAM
Accesses
Program
or removes
Removes
(Z)
CD/DVD/VCR select buttons
Select the
VCR)
output
to view
source
the TV
on
(CD/DVD
CD/DVD
FM/AM
VCR
AUX
track number
on
the
as
on
the
AUX
For selecting the digital signal from
DIGITAL AUDIO IN (OPTICAL)
AV
Press to clear
menu.
preset stations from the
tuner memory.
DISPLAY,
AV
-
Selects
in the
option
an
menu.
PROGRAM
CLEAR
SOUND MODE
BYPASS,
LOGIC, PRO LOGICII (MOVIE,
MUSIC, MATRIX) and 3D SURROUND.
AUDIO
Selects
PR/TRK/PRESET
SET UP/ i
SET UP/ i
Access or
-
menu.
REC/ITR
TUNING-
TUNING+
normally
or
(z)
activates Instant
Timer
MEMORY
Recording.
BACKWARD
DVD: Search
-
ENTER
backward*/go
beginning
chapter or track or go to
previous chapter or track.
RETURN
DISC MENU
of current
VCR: Rewinds the
tape
Enter
radio stations
a
Accesses
PR/TRK/PRESET
Marks any
SEARCH
reverse
picture
seconds.
( >)
REC/ITR
BACKWARD
Displays
FORWARD
VCR: Advances the
or
forward*/go to next
chapter or track.
tape in STOP mode
for fast forward
picture
search.
Selects
STOP
PAUSE/STEP
PLAY
STOP
MARKER
SEARCH
S-TITLE
MUTE
PAUSE/STEP
ANGLE
REPEATA-B
REPEAT
TV/VCR
CM SKIP
SPEED
TITLE
ZOOM
(X)
PLAY
Starts
a
DVD
language.
silence the
speaker
of the
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
ZOOM
Enlarges
DVD video
image.
the disc's Title menu,
if available.
REPEAT A-B/SPEED/REPEAT
(G)
playback.
angle
subtitle
DVD/VCR Combi receiver.
-
camera
a
Displays
RANDOM
-
ANGLE
Selects
menu.
TITLE
Pause
playback or recording
temporarily/press repeatedly for
frame-by-frame playback.
MARKER SEARCH
Momentarily
(A)
Stops playback.
point during playback.
MUTE
*Press and hold button for about two
seconds.
volume.
S-TITLE
FORWARD
DVD: Search
(+/-)
MARKER
*Press and hold button for about two
for fast
into
DVD disc.
menu on a
VOLUME
Adjusts speaker
in STOP mode
frequency
Displays functions on the TV screen.
Acknowledges menu selection.
search.
or
menu.
DISC MENU
(. )
to
setup
remove
or an
the tuner.
-
Records
language (DVD)
(CD).
MEMORY/ENTER
RETURN
setup
audio
an
audio channel
To tune in the desired radio station.
Removes the
source
AUDIO
(b/B):
TUNING
bands)
PRO
Select programme of VCR or Tuner Adjusts
manually the tape's picture onscreen.
-
and AM
(FM
Selects sound mode between
PR/TRK/PRESET(v/V):
-
choice.
SOUND MODE
Switches among the clock, tape counter
tape remaining modes on the display.
(left/right/up/down)
listening
(Tuner, AV1, AV2).
display.
and
b/B/v/V
the
Selects the VCR deck's
CLK/CNT
Accesses On-Screen
Introducin
Select the DVD/VCR Combi receiver's tuner
program menu or a mark
MARKER SEARCH
a
or
screen.
FM/AM Tuner select button
menu.
CLEAR
EJECT
Opens and closes the disc tray.
Ejects the tape in the VCR deck.
-
if
Repeat chapter, track, title,
Repeats sequence.
Selects recording speed.
all.
available.
CM SKIP
Fast forwards
picture
search
seconds
Play
through 30
of recording.
RANDOM
tracks in random order.
Note
This remote control
To
use
To
use
use
the
same
buttons for VCR and DVD functions
(ex. PLAY).
the
VCR, first press the VCR button.
the DVD, first press the CD/DVD button.
9
Rear Panel
AC Power Cord
Plug
into the power
source.
ANT.IN
COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
Connect to
(Y
TV with Y Pb Pr
a
Connect the aerial
using
this
jack.
Pb
Pr)
inputs.
RF. OUT
Connect to
a
TV with RF cable.
DVD/VCR OUT VIDEO OUT/AUDIO OUT
FM ANTENNA CONNECTOR
(Left/Right)
Connect the FM antenna to this
Connect to
a
TV with video and
audio
terminal.
inputs.
4
88
888
VCR IN LINE 1
(VIDEO
IN/AUDIO IN
Connect the audio/video
external
(Left/Right))
output of
an
(Audio system,
TV/Monitor, another VCR).
source
S-VIDEO OUT
Connect to
a
S-Video
(DVD OUT)
Input on TV.
FOR DVD VIEWING ONLY.
SPEAKER CONNECTORS
Connect the six
supplied speakers
to these terminals.
DIGITAL AUDIO IN
(OPTICAL)
AM ANTENNA CONNECTORS
Connect the AM antenna to this terminal.
Do not touch the inner
pins
Electrostatic
may
discharge
Remote Control
of the
cause
jacks
Point the remote control at the remote
Angle:
remote
the
rear
panel.
sensor
to the unit.
Remote control
Operation Range
press the buttons.
Distance: About 6m
remote
on
permanent damage
and
battery
Detach the
installation
battery
cover on
the
rear
of the remote control, and insert two
(20ft)
from the front of the
AAA AAA
R03
sensor
(size AAA) batteries
aligned correctly.
with
and
About 30°in each direction of the front of the
sensor
Caution
Do not mix old and
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
10
Installation and
Tips
Depending
Setup
your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
Caution
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
in
ding
2.
jacks
jacks
Do not connect this unit's AUDIO OUT jack to the
in jack (record deck) of your audio system.
phono
Connect the Left and
Make one of the following connections, depending
on the capabilities of your existing equipment.
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's INPUT to
COMPONENT VIDEO.
When using the S-VIDEO OUT jack, set the TV'
INPUT to S-VIDEO.
Basic connection
OUT to the video in
AUDIO OUT
jacks of
left/right in
cables. (A)
jacks
on
the TV
using
the audio
Notes:
jack on
jack on
Progressive to "On" on the setup menu for
progressive signal, see page 23.
Once the setting for progressive scan output is
entered, an image will only be visible on a progressive
scan compatible TV or monitor. If you set Progressive
Connect the Left and
Right
using
Press STOP and hold it for five seconds before
it. The video output will be restored to
the standard setting and a picture will once again
be visible on a conventional analog TV or monitor.
s
the video
Progressive scan does not work with the analog
video connections (yellow VIDEO OUT jack) or
S-VIDEO connection.
Rear of this unit
the TV
using
(DVD
exclusive out
connection)
AUDIO
unit's DVD/VCR OUT to the audio
the audio cables.
Basic connection
InstaliodSeup
Remove any disc from the unit and close the disc
on the
display window.
tray. See that "NO DISC" is displayed
releasing
this unit's DVD/VCR
the TV
1)
cable.(V)
1.
Right
Player to the corresponthe Y Pb Pr cable. (C)
this unit's DVD/VCR OUT to the audio
2)
(AV)
Connect the VIDEO
on
using
Scan to On in error, you must reset the unit.
to a TV
Connecting
2.
the DVD
on
the TV
on
Set the
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
1.
1.
on
jacks of this
left/right in jacks
(A)
88
4
(RF)
Connect the antenna cable from your indoor/ outdoor antenna to ANT.IN jack on the rear panel of
this unit.
2.
Connect the
RF.OUT
on
the
Video
panel
Input. (R)
rear
television's Antenna
Component
RF antenna cable from the
supplied
jack
(Color
of this unit to your
C
(for DVD)
1.
Rear of TV
Connect the COMPONENT/PROGRESSIVE SCAN
VIDEO OUT
in
2.
jacks
on
jacks
the unit to the
on
the TV
using
Connect the Left and
an
Y Pb Pr
Right
on
the TV
using
Pr
the audio
jacks of
audio left/right in
cables. (A)
Connect the S-VIDEO OUT
this unit to the
S-Video in
S-Video cable.
jack
on
the TV
Pb
Y
AUDIO INPUT
S-VIDEO
ANTENNA
INPUT
INPUT
R
A
V
S-Video connection (for DVD)
1.
COMPONENT/ ROGRESSIVE
SCAN VIDEO INPUT
VIDEO
INPUT
corresponding
cable. (C)
AUDIO OUT
this unit's DVD/VCR OUT to the
jacks
S
Stream ) connection
jack on
using the
R
(S)
2.
Connect the Left and
Right
AUDIO OUT
jacks of
left/right in
cables. (A)
this unit's DVD/VCR OUT to the audio
jacks
on
the TV
using
the audio
Progressive Scan (ColorStream Pro)
If your television is
connection
high-definition
"digital
ready" television, you may take advantage of the
DVD Player's progressive scan output for the
highest video resolution possible.
a
or
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive
Scan
on
the unit.
Rear of this unit
(Basic connection)
Note:
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable, do
not connect the yellow video cable.
11
Accessory
Audio/Video
(A/V) Connections
to DVD/VCR Combi
receiver
Connect the AV 3
jacks
on
the DVD/VCR Combi receiver to the audio/video out
jacks
on
your accessory
component, using the optional audio/video cables.
If the auxiliary devices (e.g. DVD) are equipped
input jack of the DVD/VCR Combi receive.
Accessory
with OPTICAL OUT
jack,
connect them to to the
corresponding
Device Jack Panel
Front of this unit
VIDEO
OUTPUT
AUDIO
OUTPUT
R
L
DVD Player
(or Digital Device, etc)
OR
OPTICAL
OUT
88
4
888
Radio Aerial Connections
Connect the
supplied FM/AM aerial for listening to the radio.
loop aerial to the AM aerial connector.
?
Connect the AM
?
Connect he FM wire aerial to the FM aerial connector.
FM Wire aerial
AM
Loop
aerial
(supplied)
(supplied)
88
4
888
Notes
12
?
To
prevent noise pickup, keep the AM loop aerial away from the DVD/VCR Combi receiver and other components.
?
Be
sure
?
After
fully extend the FM wire aerial.
connecting the FM wire aerial, keep it
to
as
horizontal
as
possible.
Connection
Speaker System
Connect the
speakers using
To obtain the best
possible
the
cords.
supplied speaker
surround sound,
adjust
Front
Speaker
(Right)
the
speaker parameters; distance, level,
Centre
Front
Speaker
(Left)
Speaker
4
88
etc..
InstaliodSeup
888
Rear
Speaker
(Right Surround)
Rear Speaker
(Left Surround)
Subwoofer
Notes
?
Be
sure
to match the
reversed,
?
If you
speaker
cable to the
appropriate
terminal
the
on
components:
+
to
+
and
--
to
--.
If the cables
are
the sound will be distorted and will lack base.
front
use
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
the
speak-
ers.
?
Do not
remove
the front
cover
of
supplied speaker.
About Ferrite Core
Be
1
to attach the ferrite
sure
(for connecting
This ferrite
to this
core can
core
speaker
cables
unit).
a
reduce noises.
How to attach the ferrite
1. Push the
to the
core
stopper [a] of the ferrite
2
core
2. Wind the Subwoofer cable three times
to open.
on
A
Wind the Subwoofer cable
(A).
ferrite
core
B
the ferrite
88
core
a
once on
4
888
the
(B).
Make the
as
3. Pass the others
straight
4. Close the ferrite
core
on
the ferrite
core
3
(B).
short
length here
possible.
as
A
until it clicks.
Notes
?
Take
care
ferrite
?
not to
pinch
the
speaker
cables between the
B
cores.
Attach the ferrite
core near
the unit
(Refer
to the
fig.3
and
comment.).
13
Speaker Positioning
In the
of normal
case
position
use
the 6
speakers (2
front
centre
speakers,
speaker,
2
speakers
rear
and
subwoofer).
If you want to
a
?
?
play
the excellent bass sound, DTS
digital
surround
or
Dolby Digital surround,
you should connect
subwoofer.
Front
speakers
According to your listening position set up
interval between speakers to 45 degree.
Centre
speaker
speakers
The centre
and front
speakers
the
speakers
the
ideally
are
for
distance. And
equal
same
But
height.
by hearing position
normally place
it above
set up the
or
below the
television.
?
Rear
speakers
Place left and
right
for surround sound
behind the
playback.
tion and install them at
towards
In the
a
wall
of
case
a
smaller
other, and set the
?
or
ceiling
or
rear
listening
area.
These
speakers
above the level of the listener's
to further
room
recreate sound motion and
For best results, do not install the
disperse
speakers
-
speakers
atmosphere required
listening posidirect the rear speakers
too far behind the
It is also effective to
the sound.
size, if the audience is
above 60
ears.
rear
90
cm
near
to the
rear
than the listener's
wall set the
rear
speakers opposite
ears.
Subwoofer
This
can
be
placed
in any front
position.
Subwoofer
Centre
Front
Rear
Speaker
Speaker
(Left)
Front Speaker
(Right)
Rear Speaker
(Right)
Speaker
(Left)
Speaker Positioning Example
14
each
Mini
Glossary
for Audio Stream
This unit
produce a 3D Surround effect, using 3D
technology, which simulates multi-channel
audio playback from two conventional stereo speakers
instead of the five or more speakers normally required to lis-
& Surround mode
Allows you to
can
Surround Sound
discrete channels of
enjoy 5.1(or 6)
3D SURROUND
high
ten to multi-channel audio from
audio from DTS program sources such as
DVD and compact discs, etc.bearing the trademark.
a
home theatre. This feature
quality digital
works with DVD discs encoded with
discs,
Dolby Digital
Dolby
Pro
Logic
and
audio tracks.
DTS
Digital Surround delivers up to 6 channels of transparaudio(which means identical to the original masters) and
results in exceptional clarity throughout a true 360 degree
Software with multichannel surround audio
sound field. The term DTS is
according
ent
Technology,
Technology,
a
trademark of DTS
BYPASS
to the way it
was
signals
is
played
recorded.
LLC. Manufactured under license from DTS
Sound Mode
LLC.
You
The
Dolby Digital surround format lets you enjoy up to 5.1
channels of digital surround sound from a Dolby Digital promark, you can
gram source. If you play DVDs with
enjoy even better sound quality, greater spatial accuracy, and
improved dynamic range.
enjoy surround sound simply by selecting one
pre-programmed sound fields according to the
can
of the
program you want to listen to.
""
Use this mode when
""
which carries the
effect of
being
effect with
DOLBY
in
playing
mark.
movie theatre
a
which
intensity
an
PRO
movie
LOGIC
can
Dolby Digital 2 channel
This mode provides the
or
or
live concert house-an
only
SURROUND.
be obtained
The
of
Logic
II creates five full-bandwidth
nels from two-channel
sources.
This is done
any
spatial properties
new
sounds
or
of the
original recording
as
Each time you press SOUND MODE button, the
sound mode is changed in the following order;
PRO LOGIC
→
→
PL2 MOVIE
3D SURROUND
→
PL2 MUSIC
→
→
PL2 MATRIX
BYPASS
When DVD is inserted.
You
can
change
the stream of DVD
(Dolby Digital, DTS,
PCM, etc) by pressing the AUDIO button
on
the remote dur-
used.
an
advanced, high-purity matrix surround decoder that
the
window
ing playback.
Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is
output chan-
using
the sound
the
(II)
Pro
repeatedly until
display
through
effect
front/back/left/right movement of the sound image, as well as
the sense of fixed position in the sound image, is much clearer and more dynamic than before.
Dolby
Press SOUND MODE
mode you want appears in the
below.
extracts
without
adding
Each time you press AUDIO button, the sound mode of DVD
changed as the following order;
is
tonal colorations.
→→→
MOVIE mode:
The Movie mode is for
use
with stereo television shows and all
programs encoded in Dolby Surround. The result is enhanced
soundfield directionality that approaches the quality of discrete
5.1-channel sound.
For your reference
?
last mode
MUSIC mode:
The Music mode is for
and
provides
a
with any stereo music recordings,
wide and deep sound space. The Music mode
use
?
includes controls that allow the sound to be tailored to individual
listening
tastes.
mono
the Music mode
logic is
signals by making
except that
turned off. It may be used
them seem "larger." The
Matrix mode may also find use in auto systems, where the
fluctuations from poor FM stereo reception can otherwise
disturbing
for each
You
identify
individually.
encoding format of
program software by looking at its packaging.
Dolby Digital discs are labeled with the
logo.
Dolby Surround encoded programs are labeled
with the
logo.
DTS Digital Surround discs are marked with DTS.
can
source
the
-
same as
the directional enhancement
cause
settings
-
MATRIX mode:
The Matrix mode is the
to enhance
The DVD/VCR Combi receiver memorizes the
surround
signals
ultimate "cure" for poor FM stereo
force the audio to mono.
from
Note
decoder. The
logic
reception may
a
be
simply
-
to
?
When you
play sound tracks with 96kHz sampling
frequency, the output signals will be converted to 48kHz
(sampling frequency).
15
Before
in
Tuning
a
Operation-VCR part
video channel
on
your TV
6.
The
The output frequency of this video recorder
(VCR) is set at UHF channel 36. If channel 36
already used by another TV station, or if
picture is distorted, you can change the
transmitter channel of your VCR. Stages 5
will show you how to change the output
frequency of your VCR.
Your TV receives
recorder
signals
screen.
the
8
~
from the video
RF
7.
channel number
a
usually
Press PROG. 3
You
or
4 to select another video chan-
also set it to "OFF" if there is any interferwhen your TV is connected to the VCR with a
RCA lead.
so
dedicated video channel built into it,
called AV
36
nel. You may select any channel number between
28 and 68.
on your TV
that you may watch video
tapes. If you have used AUDIO and VIDEO
cables then your TV should already have a
have to select
and tune it in
CHANNEL
PSET
R
like another TV station. You
(VCR)
4 on the front of your VCR for
or
than 4 seconds.
RF36 will appear in the display window.
following picture will be displayed on the TV
Notes
is
Press PROG. 3
more
can
ence
8.
Select
a
TV channel number
on
which you wish to
watch video's.
.
Press
1.
Make
VCR
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
Turn
2.
on
on
STANDBY/ON
appears.
Store this channel
your VCR.
your TV.
Insert a pre-recorded video tape into your VCR
and press PLAY on the remote control.
Select a TV channel number on which you wish to
Note
watch video's.
VCR and
Don't worry if you don't have a video-tape to play
stage! If you switch your VCR on and con-
video channel
at this
tinue
stages
3
4, instead of seeing video play-
~
back tune your TV until you
see a
bright
blue
on
when you have finished.
Tune this channel so that
Make
sure
on
a
the front of your VCR
bright
blue
screen
your TV.
that you have correctly installed your
successfully tuned in a dedicated
on your TV. If you do not tune in a
dedicated video channel on your TV you will be
unable to view and record video tapes!
screen.
3.
Tune this channel until the video
picture
is
sharp
and the sound is clear.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
channel. The AV channel is
optimum
4.
video
playback
on
already pre-tuned
for
your TV.
Store this channel on your TV.
You will need to look at the TV instruction book if
you do not know how to do this.
5.
for the very first
time
Following picture
will
display
TV stations,
To make
tuning
3 to 4
shown "ACMS"
as
1
4. Select
~
a
TV channel number
be
displayed).
the TV
screen
please follow stages
(see p.18).
~
stages
on
when you have just connected your video
recorder for the very first time.
Only carry out stages 5 8 if you cannot
obtain clear video playback as described in
on
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
16
Using your VCR
ACMS
Pr-12
ACMS
Setting
the clock
To set the colour system
Manually
The clock in your VCR controls time and date
settings for your VCR.
1.
1.
Press i.
2.
The main
menu
will appear
on
the TV
screen.
Press i.
Press 1
or
3.
2 to select TIME DATE.
Press 1
or
2 to select the SYSTEM and press
or
4 to select
ENTER.
Press ENTER.
4.
Press 3
according
to the COLOUR
system used.
HHMNDDMMYY
:.
-
-
--
--
--
---
.
TIME
DATE
VCR
REC
Dr.
E
fOS
2.
Use the numbered buttons
to alter the
ON
OFF
the remote control
on
HOURS, MINUTES, DAY,
MONTH and
OPR
Press 1
or
2 to select the RF AUDIO.
YEAR.
Press 3
or
4 to select
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
used.
The
day
of the week will appear
5.
according
to the RF AUDIO
automatically
when you enter the year.
VCR
REC
E
Dr.
fOS
ON
OFF
OPR
HHMNDDMMYY
8
:.
00101
.
THU
6.
Press i to
remove
the
menus
from the TV
screen.
TIME
DATE
3.
If you make
a
mistake press 1
or
2 and enter the
correct details.
4.
Press i.
17
How to
using
This VCR
can
the
be
easily
displayed
menus
The
the main
menus are
Tuning
menu
programmed by using
on screen.
controlled from the Remote
Control Handset.
1.
2.
on your TV set and video recorder
the POWER button.
by
press-
Press i button.
The main
If the TV broadcast
section
1.
2.
will appear
menu
on
the TV
Automatically
is weak your VCR may
signal
not detect the necessary information and will not
be able to store them correctly. To overcome this
turn to the MANUAL TUNING
problem please
Switch
ing
in TV Stations
on
page 19.
Press POWER to turn
Press i button.
The main
screen.
your VCR.
on
Press 1
will appear on the TV
2 to select the ACMS.
menu
or
screen.
Press ENTER.
VCR
P
SET
R
Pr-12
ACMS
Dr.
NIC
fOSD
ON
OFF
OPR
VCR
12
REC
P
SET
R
REC
Timer
recording setting (see p. 28).
PR SET Manual tuning setting (see p. 19).
ACMS ACMS (Automatic Channel Memory
System) (see p. 18).
TIME DATE
Date & clock setting (see p. 17).
SYSTEM To set the Colour TV System
(see p. 17).
Dr. To check a problem with your VCR
(see p. 41).
F.OSD ON/OFF To display the operational
-
Pr-12
Dr.
Pr-12
NIC
fOSD
ON
OFF
OPR
-
-
-
O
O
O
-
ACMS
-
-
Pr-12
ACMS
3.
mode of your VCR
O
O
OPR
NIC
-
-
Press ENTER
(see p. 41).
improve the playback picture
(see p. 26).
To
To activate
digital
or
sound
to start the automatic
again
tuning
process.
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
deactivate the NICAM
(see
p.
42).
S
E
Pr-12
ACMS
Tip
You
can
setup
3.
change the menu language on the DVD
(See the Menu Language on page 22.)
menu.
Press 1 and 2 to select the desired
Press ENTER and press 3
4.
Press "i" to return to
a
TV
or
menu.
4.
The TV STATION TABLE will appear when
is complete.
Press i to
save
picture.
settings.
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
PSET
R
18
your
4 to select.
PR-07
PR-08
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
areas
4.
Manually
of the country broadcast
will
Press 3
or
4 to
manually
Press 1
CH
C10
MFT
STATION
CHANNEL/CABLE
5.
will appear on the TV
2 to select the PR SET.
menu
or
PR
09
:
AV
P
R SET
Press i.
The main
station.
adjust.
in order for your DVD/VCR
Combi receiver to store them.
1.
a
or
You must tune in these weaker broadcast
stations
stop when it locates
Press 2 to select MFT.
signals
may be too weak for your DVD/VCR Combi
receiver's automatic tuning process to find
assign TV stations correctly.
Searching
screen.
Press 2 to select STATION
that you may
so
name
your TV station.
Press ENTER.
Press ENTER.
PR
PR
CH
01
MFT
STATION
00
PR-01
C09
CH
MFT
C10
00
STATION
VCR
Pr-12
REC
ACMS
ON
OFF
2.
Dr.
CHANNEL/CABLE
NIC
fOSD
:
AV
P
SET
R
P
SET
R
OPR
6.
Press i.
The station table will appear.
Press 3 or 4 to select the programme number
that you want to tune
(for example,
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
PR
Press 3
or
the
station
new
Press 1
or
4 to select letters and numbers for
name.
2 to
move
back and forth between
characters.
09).
Press ENTER.
PR
C09
CH
MFT
C10
00
STATION
,
P
SET
R
3.
Press ENTER.
7.
Press AV to select C
(Standard stations)
or
S
Press i
(Cable stations):
C02
-
C69, S01
Your
-
S41.
Enter the channel number of station that you want
to tune with the numbered buttons
to find the
Press i, confirm the station
required
or use 3 or
new
TV station has
If you wish to
stages 1 7.
repeat
4
station.
12
13
14
09
been tuned into your VCR.
tune other stations
-
11
CH
now
manually
10
PR
placement.
again.
MFT
--
15
STATION
16
----
P
RSET
CHANNEL/CABLE
:
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
AV
P
RSET
19
the order of TV Stations
Changing
After
TV stations into your DVD/VCR Combi
change the order in
tuning
Deleting TV Stations
After
TV stations into your DVD/VCR Combi
tuning
receiver you may wish to
receiver you may wish to delete a station.
which
The instructions
they are stored without having to retune them
against! The instructions given on this page will
show you how you can simply move them into your
desired order.
1.
how
1.
Press i.
The main
Press 1
Press i.
The main
Press 1
given on this page will show you
delete any unwanted TV stations.
easily
will appear on the TV
2 to select the PR SET.
menu
or
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press ENTER.
screen.
Press ENTER.
PR
CH
MFT
STATION
00
PR-01
01
VCR
Pr-12
REC
PR
CH
01
MFT
STATION
00
PR-01
ACMS
ON
OFF
Dr.
CHANNEL/CABLE
NIC
fOSD
:
AV
P SET
R
OPR
VCR
Pr-12
REC
ACMS
ON
OFF
2.
Dr.
:
2.
AV
P
R SET
OPR
Press 3
or
4 to select the programme number
(for example,
move
02
C03
00
PR-02
03
C05
00
PR-03
04
C06
00
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
PR
(for example,
03)
4 to select the programme number
or
you want to
Press 2.
Press 3
Press i.
you want to delete.
Press i.
Press 3
3.
CHANNEL/CABLE
NIC
fOSD
MOVE
:
DELETE
:
PR
03).
01
C02
00
02
C03
00
PR-01
PR-02
04
C05
00
PR-04
05
06
C06
C07
00
00
PR-05
07
C08
00
PR-07
08
C09
00
PR-08
02
C03
00
PR-02
03
C05
00
PR-03
04
C06
00
PR-04
05
C04
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
P SET
R
PR-08
:
DELETE
:
,
03
3.
PR-06
Press 1.
After
a
short while, the selected station will be
deleted.
P
SET
R
,
4 to select the programme number
you want to move to (for example, PR 05).
or
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
PR-02
PR-04
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
04
PR-07
MOVE
01
C02
00
PR-01
02
C03
00
PR-02
04
C06
00
PR-04
05
06
C04
C07
00
00
PR-05
PR-06
07
C08
00
08
C09
00
PR-07
PR-08
MOVE
DELETE
P
RSET
:
:
,
05
4.
P
RSET
Press i to
remove
the
menus
from the TV
If you wish to delete other TV stations
stages 1 3.
screen.
repeat
-
4.
Press ENTER.
The selected programme will be moved to the
new programme number.
If you wish to
Press i to
move
remove
other TV stations
the
menus
repeat stages
from the TV
1
-
4.
01
C02
00
PR-01
02
C03
00
PR-02
04
C04
00
PR-04
05
C07
00
PR-05
06
C08
00
PR-06
07
C09
C10
00
00
PR-07
PR-08
08
screen.
MOVE:
P
SET
R
01
C02
00
PR-01
02
C03
00
03
C05
C06
00
04
00
PR-02
PR-03
PR-04
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
How to
selecting
Stored TV stations
ways.
Press 3
or
DELETE
:
,
Stored TV stations:
can
be selected in either of two
4 to select different stations that are tuned
into your DVD/VCR Combi receiver.
You may also directly select stations
numbered buttons
20
on
using
the remote control.
the
Before
Operation-DVD part
On-Screen
You
use
the
Some items
the
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
inputting
the
For
number).
some
also
functions,
setting.
provide
0:20:09
Display only
AUDIO
OFF
ABC
Display only
all of the features
Page (or Angle)
b/Bor
ANGLE
or
?
If
no
button is
pressed for 10 seconds,
display disappears.
screen
Playback
the
on-
Status/Restrictions
TITLE
A-B
1/9
Repeat
title
Repeat
sequence
Enter
Marker
a
1/3
Example: On-Screen Display during
playing VCD
Selection Method
Items
Track Number
MARKER SEARCH
123456789
Marker Search
Resume
Action
play
prohibited
or
(or
menu
from this
PBC
1/3
Numbers
0:20:09
STEREO
Sound
Title Number
1/3
b /
B, Numbers
Number
1/12
0:20:09
Audio
language
Digital Audio
Output mode
Sound
language
Numbers, ENTER
b/Bor
and
Angle
B, Numbers
b/B
Example: On-Screen Display during
playing divx movie disc
Selection Method
Items
Track Number
1/3
b /
B, Numbers
ENTER
Time search
0:20:09
Numbers, ENTER
ENTER
Time search
Subtitle
b /
AUDIO
3D SUR
ENTER
Chapter
ENTER
b/Bor
Audio Channel
Selection Method
B, Numbers
ENTER
Time search
Example: On-Screen Display during
playing DVD Video
b /
mode)
point
not available
Items
InstaliodSeup
b/Bor
mode
language
B, Numbers
ENTER
DVD Audio
Output
B, Numbers
ENTER
b /
Time search
Subtitle
Notes:
Some discs may not
shown below.
b /
Number
Track Number
setting. You can
appropriate (e.g.
press ENTER to execute the
?
Selection Method
Items
highlighted.
change
the title
Example: On-Screen Display during
playing DVD Audio
Group
item.
the number buttons if
use
menu.
during playback.
Press v / V to select
2.
the TV
general playback status on
can be changed using the
on-screen display:
display
can
screen.
To
Display
Audio
language
Digital Audio
Output mode
b/Bor
1
and
MP3
AUDIO
Subtitle
ABC
1 ENG
ABC
ENG
b/Bor
S-TITLE
b/Bor
S-TITLE
1/3
language
AUDIO
Sound
3D SUR
b/B
b/Bor
ANGLE
3D SUR
b/B
21
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 22 to 25.
To
display
the
display
menu.
SETUP will take you back to initial
Off
Disc Menu
Original
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
then press
to the second level. The screen shows
move
option
the selected item,
as
well
option
as
then
a
language
for the
Use v / V to select the desired
setting then press
ENTER to confirm your selection. Some items
require additional steps.
5.
Press SETUP
PLAY to exit the
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
DVD-V
Setup
menu.
original language
Other: To select another
on-screen
DVD-A
track
in which the
language, press number
corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
buttons then ENTER to enter the
press CLEAR.
to the third level.
4.
or
Language
Disc Audio / Subtitle / Menu
Use v / V to select the second desired
press B to
Menu
Select
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
move
Move
display.
Operation
the current
22
Disc Subtitle
A second press of
To go back to the previous level:
Press b on the remote control.
3.
Original
screen.
To go to the next level:
Press B on the remote control.
B to
English
Language
Disc Audio
and exit the Menu:
Press SETUP to
General
Menu
5.
DISPLAY
Pressing
scan
DISPLAY
TV
16
Aspect
Display
Mode
Progressive
:
DVD-V
Aspect
4:3
:
Select when
a
Display
Mode
Select
a
setting
ing it. The video output will be restored to the standard
setting and a picture will once again be visible on a
conventional analog TV or monitor.
AUDIO
DVD-A
works
only
when the TV
Aspect
Each DVD disc has
on
the
audio
Automatically displays the wide picture
screen and cuts off the portions that do not
on
entire
fit.
use.
5.1
the
Select
Speaker Setup
DRC
On
Vocal
On
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
5.1
To turn On
Select
progressive
scan:
out of this unit to the
component
your monitor/television, set your television
input
or
of
monitor
Component Input.
1. Select
system you
AUDIO
Panscan:
to
variety of audio output options.
options according to the type of
a
Set this unit AUDIO
LetterBox: Displays a wide picture with bands
upper and lower portions of the screen.
Connect
InstaliodSeup
16:9 wide TV is connected.
mode is set to "4:3".
Progressive
Press STOP and hold it for five seconds before releas-
2)
standard 4:3 TV is connected.
DVD-V
Mode
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc tray.
See that "NO DISC" is displayed on the display window.
DVD-A
16:9 Wide: Select when
Display
Caution:
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Once the
Off
Move
TV
Progressive
9Wide
Widescreen
Scan
ENTER will set this unit to
mode.
"Progressive
Scan"
on
the DISPLAY
menu
DVD-A
Speaker Setup DVD-V
speaker settings, including volume balance and
distance, or test the speaker settings.
Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Settings", page 38.)
Dynamic Range
Control
(DRC)
DVD-V
DVD-A
With the DVD format, you can hear a program's
soundtrack in the most accurate and realistic
DISPLAY
Aspect
Display
Select
DivX
then press B.
TV
Move
presentation possible, thanks to digital audio
technology. However, you may wish to compress the
dynamic range of the audio output (the difference
between the loudest sounds and the quietest ones).
Mode
Progressive
Scan
On
Off
This allows you to listen to a movie at a lower volume
losing clarity of sound. Set DRC to On for this
without
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
effect.
Vocal
DVD-V
Set to On
3. Press ENTER to confirm your selection.
The confirm menu will appear.
playing.
only
DVD-A
when
a
multi-channel karaoke DVD is
The karaoke channels
on
the disc mix into
normal stereo sound.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
4. When the confirm
Cancel is
to
menu
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
23
OTHERS
DivX(R)
The PBC, Auto
Play
and
DivX(R)
VOD
settings
can
be
changed.
VOD
DivX
You
can display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
OTHERS
PBC
Auto
On
DivX(R)
DivX(R)
Off
Play
Your
Select
VOD
Video On Demand
registration
To learn
code is
more
:
XXXXXXXX
visit
www.divx.com/vod
PBC
Set
(Done)
Select
Move
The
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
encrypt
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
If you rent the DivX VOD file, it has several
limits as shown below.
You
Display
View
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
Play
play
can
watch the file.
player will
longest playback time and
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
VOD Rental
Do you want to
mode is set to On, this DVD
back the title
DivX(R)
This rental has 3 views left.
use one
of your 3 views now?
search for title that has the
then
the number which you
DVD-V
can
If Auto
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
Play
function may not work for
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
24
options
viewing
?
Play
file.
Notes:
Audio CDs.
Auto
move
of
LOCK (Parental
Password
Control)
You
LOCK
Rating
Unlock
Password
New
Country
AE
Code
can
(Security Code)
enter
1. Select Password
on
2. Follow
shown left
step
"New" is
Input
DVD-V
Rating
Some movies contain
that may not be suitable
of these discs contain
scenes
Many
country. Some discs offer
suitable
more
scenes as an
If you
control feature allows you to block
below the rating you input, there
1.
2.
3.
your children from being able to view
material you believe is unsuitable.
preventing
"Rating"
on
the LOCK
menu
then
Code
Press SETUP to
Input
the
display
the
can
Setup
clear it
number "210499" and the
6-digit
InstaliodSeup
using
menu.
the
must
4-digit code and press ENTER. Enter it
and press ENTER to verify. If you make a
a
mistake before
Enter
a new
code
as
security
described above.
Country
DVD-V
Code
Enter the code of the
DVD-A
country/area
whose standards
used to rate the DVD video disc, based
list in the reference chapter.
Rating, Password and Country Code
input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
access
features, you
Input
again
forget your Security
menu.
were
press B.
2. To
then press ENTER.
4-digit code,
verify.
to
by
scenes
1. Select
or
code is cleared.
parental
to
then press B.
(Rating). "Change"
If you forget your security code you
the following steps:
alternative.
access
new
again
4. Press SETUP to exit the
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
The
as
menu
Select
DVD-A
for children to view.
it
2
the LOCK
highlighted.
3. Enter the
Move
change password.
or
pressing ENTER,
press CLEAR.
1.
Select
Code"
"Country
on
the LOCK
on
menu
the
then
press B.
2.
Follow
3.
Select the first character
4.
step
Shift the
2
as
cursor
shown left
(Rating).
using
v / V buttons.
using B button and select
using v / V buttons.
the
second character
3. Select
rating
a
from 1 to 8
using
the v / V buttons.
5.
Rating
1-8:
tions and
Rating one (1)
rating eight (8) is
has the most restric-
Press ENTER to confirm your
country code
selection.
the least restrictive.
Unlock
If you select unlock, parental control is not active
and the disc plays in full.
Notes:
If you set
the same
scenes
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
available
same
a
on
rating
the disc. The alternative must have the
or a
lower
one.
found, playback stops. You
word
or
change
the
rating
If
no
suitable alternative is
must enter the
level in order to
4-digit passplay the
disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
25
Operation
a
You will
be able to load and
only
Tape
eject video
cassettes
when your DVD/VCR Combi receiver is plugged into
the mains. Your DVD/VCR Combi receiver may also
playback recordings from
Getting a better picture
When
NTSC
tapes (on PAL TV).
playback started, the
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control or
press PROG. 3 or 4 on the front panel to manually
adjust the tracking until any distortions have been
a
cassette is inserted and
automatic
removed. Press numbered 0
switch automatic
on
back
tracking
the remote control to
on
again.
sure that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
this book.
your TV. Press POWER to turn on your
DVD/VCR Combi receiver. Insert the video cassette
on
into your DVD/VCR Combi receiver. The video casfacing up and
sette should have the window side
the
arrow
facing
During playing
To switch off the slow motion and shuttle, press the
desired function.
During
appear
slow motion and shuttle, the noise bars may
on the picture according to the status of
tape.
If distortions
can
them with D
or
away from you.
6. Press STOP to end
CM
automatically.
normal
resume
While
playback.
tape is playing press CM SKIP
skip
commercial
Your VCR will
automatically adjust the tracking to
give the best picture quality.
If noise bars appear during playback, adjust the
tracking manually by pressing PR/TRK (3/4).
3. Press PAUSE/STEP to still
Press PAUSE/STEP
picture.
repeatedly to advance
the
down at about 1/19 times the normal
playback. Tapes can be paused for up to 5 minutes.
After 5 minutes your DVD/VCR Combi receiver will
stop the tape to prevent damaging the tape or your
DVD/VCR Combi receiver. Still
picture quality
improved slightly by pressing 3 or 4.
4. Press PLAY to continue
press CM SKIP to
skip:
1 Press 30 seconds
playing
4 Press
120 seconds
5 Press
150 seconds
6 Press
180 seconds
OPR
(Optimum Picture Response)
automatically improves playback picture
quality by adjusting your DVD/VCR Combi receiver to
the condition of the
tape.
1. Press i.
2. Press 1
or
2 to select OPR.
3. Press ENTER.
can
your tape.
Picture search:
VCR
12
12
R
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
the
Logic search:
During fast forwarding
or
the remote
This feature
a
tape frame by frame.
If you press FORWARD, the picture will be slowed
back at
on
another programme
(or
3 Press 90 seconds
AUTO TRACKING
FORWARD
playback.
(Commercial Message) Skip:
2 Press 60 seconds
played
reduce
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
cassette will start
are on
picture,
tape is reached, your DVD/VCR
stop playback automatically,
rewind, stop, eject the tape.
material).
Repeatedly
where you
in the
Combi receiver will
playing your tape.
If you load a video cassette which has had its
record protection tab removed, playback of the
be
seen
Press EJECT.
control to
2. Press PLAY to start
26
be
E.
If the end of the
1. Make
Turn
playback, Shuttle :
back or still picture press F or G.
You can reach the following playback speeds.
(-7xplay, -3xplay, -play, still, 1/19 slow, play, 2xplay,
7xplay)
5. Slow motion
Playing
tape.
MS
ON
OFF
4. Press
3
or 4
OPR
i
OPR
repeatedly
to select:
OFF, SOFT
SHARP.
Please note you may
rewinding press and hold
BACKWARD the picture will be
7 times normal playback speed.
or
Dr.
C
f
playing
a
only
tape.
5. Press i return to
screen.
set OPR when
or
Instant Timer
Recording (ITR)
5.
Your DVD/VCR Combi receiver allows you to make
recordings using a variety of simple methods:
Instant Timer
immediately
Recording (ITR) start recording
a set period of time or until the
for
video cassette
runs
6.
incorporates Long
which enables you to record up to twice
the amount of time on a video cassette. For examE-180 will record up to 180 minutes using
Standard Play (SP); using LP you will be able to
an
7.
Press REC/ITR to start
Press PAUSE/STEP to avoid
Press POWER to turn
on
your DVD/VCR Combi
receiver.
protection
tab into
your DVD/VCR Combi receiver.
The video cassette should have the window side
3.
up and the
arrow
facing
away from you.
Press
3 or 4 to select the
programme number
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote
control.
4.
when
a
tape is paused. After
5
8.
Press STOP to end
recording.
Press EJECT.
video cassette with
a
displayed
minutes your DVD/VCR Combi receiver will stop
recording to prevent damaging the tape or your
DVD/VCR Combi receiver.
sure
this book.
facing
recording.
pause mode and ITR is cancelled.
Tapes can be paused for up to 5 minutes; RECP
that you have correctly connected your
DVD/VCR Combi receiver as described earlier in
Insert
unwanted
If you press PAUSE/STEP during ITR, this
DVD/VCR Combi receiver will enter the record
will be
2.
recording
Press PAUSE/STEP to continue
LP.
Make
recording.
scenes.
record up to 360 minutes. Please note there will be
a slight loss in picture and sound quality when
1.
or
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
Play (LP)
using
Long Play
Play.
SP will produce improved picture and sound
quality, however LP will provide twice as much
recording time as SP.
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
Your DVD/VCR Combi receiver
ple
Press SPEED if you wish to record in
Standard
EJECT will appear
on
(L(MONO)/R)/
VIDEO IN terminals
repeatedly
screen
for
a
few
Notes:
If you do not wish to record on a tape (this can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
cassette.
It is
possible to record on a video cassette
protection tab removed by covering
record
If you wish to record directly from the AUDIO L/R
(VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
the TV
seconds.
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press AV until the socket you wish to record from
is displayed.
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
AV 1 for
your TV.
VIDEO
recording from AUDIO L/R (VCR IN AV1)/
(VCR IN AV1) terminals on the rear of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
on
(L(MONO)/R)/
the front of your unit.
27
recording using On Screen
Display
Timer
PR
DATE
PR-01
You may set up to seven timer record events
within one month of the current date.
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SUMOTUWETHFRSA
Note
Before
the timer make sure that you have
correctly and you know which
stations you have tuned TV stations on your VCR.
setting
set the VCR clock
1.
2.
6.
Insert a video cassette with protection tab into
your VCR.
The video cassette should have the window side
facing up and the arrow facing away from you.
Press i.
Press 1
or
Press the numbered buttons to enter the recordstart and end times of the programme that you
wish to record.
ing
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
You may also select the the start and end times
pressing
3
or 4
PR
2 to select REC.
PR-01
Press ENTER.
PR
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
TIME
190020
::
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
DELETE:
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
setting
7.
SP
--
Press 2 to select the
SP
--
4
are
Press
full press
to select the event that you wish to
Press 1 to delete the event.
3
or 4
or
DATE
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
recording speed.
to select the desired
remove
3
or
and
::
--
--
~
PR
PR-01
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
DATE
TIME
16
19002000
::
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
SP
--
necessary, to
~
--
SP
--
tape speed
tape is left and
speed from SP to LP, if
complete recording the program.
SP
--
SP
--
switches
TIME
--
SP
--
LP).
replace.
PR
SP
--
,
the timer record
event. If all timer record events
SP
--
SP
--
(SP, IP,
Press ENTER to start
SP
--
IP mode determines how much
3.
SP
--
SP
--
Dr.
OPR
SP
~
--
SP
--
NIC
fOSD
ON
OFF
Pr-12
ACMS
16
--
SP
--
VCR
P
RSET
DATE
--
TIME
--
by
.
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
--
SP
--
SP
--
SP
--
8.
Check that the timer event details
are
correct.
Press i twice.
4.
Press the numbered buttons to enter the station
If PLEASE CHECK is displayed, you have entered
incorrect and will need to re-enter the data.
that you wish to record.
When selecting stations 1
Press POWER to switch your VCR Standby.
will appear in the display window while your
9, press 0 first, then
-
the channel number; for example Stations 3 03.
You may also select Channels by pressing 3 or 4.
-
Once selected press 2.
If you wish to record from AUDIO L/R
VIDEO
(VCR
IN
AV1)
or
VIDEO IN from the back
AUDIO IN
or on
press AV to select for correct
PR
5.
DATE
the front of your unit,
or
AV2).
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
::
--
--
~
--
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
Press the numbered buttons to enter the date of
the programme.
If you press ENTER before
entering the date you
may select one of the following automated recording features. Press 1 or 2 to select, then press
ENTER to confirm. DLY To record every day
(except Saturday and Sunday) at the same time.
SU
SA To record at the same time every week.
~
28
during
timer
recording. To watch a
recording standby mode, press
DVD
POWER and DVD to switch to DVD mode.
(VCR IN AV1)/
(L(MONO)/R)/
display (AV1
VCR waits to make the
9.
Press STOP to end
recording.
Notes
If at a later date you wish to delete or change any of
the settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press 3
or 4 to select the event that you wish to delete or
change.
Press 1 to delete the event...or
Press ENTER to change; then press 1 or 2 to select;
Station, Date, Start and End times and LP. Press 3 or
4 to enter the correct information.
If Timer record events Overlap...
Make sure that the preset times of the timer recording
events do not overlap. If they do, the earlier programme will always be given priority.
Example:
Programme
1 is programmed to start at 16:00 and
end at 17:00.
Programme 2 is programmed to start at 16:30 and
end at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme 2
will be recorded.)
If Timer record events
Overlap...
Change (Deleting)
Do not
overlap programmes, since overlapping porconflicting programmes will not be recorded. Earlier recording times have priority over later
recording times as shown in the diagram.
tions of the
1 will be recorded in its
the last 30 minutes of
Programme
entirety,
but
Programme
If at
a later date you wish to delete or change any of
settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Press D
the
or
Example:
Programme
the Timer
E to select the event that you wish to delete
Press F to delete the event...or
or
change.
only
2 will be recorded.
Press ENTER to
change,
then press F
or
G to
select;
Station, Date, Start and End times and LP.
Press D
or
E to enter the correct information.
PROGRAMME 1
17:00
16:00
17:30
16:30
PROGRAMME 2
(This portion
If two
programmed
will not be
timer
recorded.)
recordings overlap
at
midnight
00:00 a.m., programme 2 will not be recorded.
29
Playing
DVD
a
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
on
Unless stated otherwise, all
the TV and select the video
connected to the DVD
Turn
2.
the
on
the audio
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the playback
side down.
3.
Press OPEN/CLOSE to close the
4.
starts
If
automatically.
playback
tray. Playback
does not start,
press PLAY.
In
some
cases, the disc
menu
might
Moving
to another TITLE
When
Use the b B v V buttons to select the
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
described
use
disc has
a
more
than
one
title, you
to
can move
another title. Press DISPLAY while
stopped
then the
b / B to
move
You
playback is
appropriate number (0-9) or use
to another title.
play any title by inputting
playback is stopped.
can
appear
instead:
operations
the remote control. Some features may also be available on the Setup menu.
its number while
Moving
to another CHAPTER/TRACK
When
title
a
disc has
er
?
on a
more
disc has
than
chapter/track
as
one
more
than
track, you
one
chapter
can move
or a
to anoth-
follows:
Press .
or > briefly during playback to select
chapter/track or to return to the beginning
of the current chapter/track.
Press . twice briefly to step back to the
previous chapter/track.
To go directly to any chapter during DVD playback,
the next
Use the 1 2
4
3
buttons to select
an
option
you
?
want, then press ENTER to view the option.
?
press DISPLAY and press v / V to select the
icon. Then, input the chapter/track
Use the number buttons to select the track you
want to view and press RETURN to return to the
menu screen. Menu settings and operating procedures may differ. Follow the instructions on the
each menu screen. You also may set PBC to Off
(See
"PBC"
on
page
24).
chapter/track
numberoruseb/B.
Search
1.
Notes:
?
parental control is set and the disc is not within
rating settings you must input the password.
(See "Lock Menu" on page 25.)
The
If
the
?
2.
or
> for about two seconds
DVDs may have a region code. Your player does not
discs that have a region code different from
player.
(two).
The
region
code for this
To watch
DVD
during
timer
your
a
player
is 2
recording standby
mode, press POWER and DVD
to switch to DVD
player
will
now
go into SEARCH mode.
Press and hold .
.
repeatedly to select
required speed: mX2, mX4, mX16,
mX100 (backward) or MX2, MX4, MX16,
MX100 (forward).
With a Video CD, the Search speed changes:
mX2, mX4, mX8 (backward) or MX2,
MX4, MX8 (forward).
or
>
the
play
?
Press and hold .
during playback.
3.
To exit SEARCH mode, press PLAY.
mode.
Changing
the Audio Channel
Press AUDIO
repeatedly during playback to hear
(Stereo, Left, or Right).
ferent audio channel
30
a
dif-
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
on
Press PAUSE/STEP
The DVD
player
will
The
player
>
or
the current
?
Title:
current title.
?
Off
?
go into PAUSE mode.
during
?
pause.
will enter SLOW mode.
Use the .
or
t 1/16, t 1/8, t 1/4
or
t 1/2
T 1/16, T 1/8, T 1/4
or
T 1/2
required speed:
(backward), or
(forward).
To exit Slow Motion mode, press PLAY.
3.
playback
in
reverse
is not
possible
with
Video CDs and DivX Discs.
?
?
?
Random
Press RANDOM
The unit
during playback or in stop mode.
automatically begins random playback
and RANDOM appears
Press RANDOM
2.
again
the TV
on
CDs, DivX Discs Repeat Track/All/Off
: repeats the current track
All : repeats all the tracks on a disc.
Off : does not play repeatedly.
screen.
or
>
repeats the current track.
Group: repeats the current Group.
Off
during Random playback,
(track) and resumes
a
setup
menu
to
use
To
produce
PBC,
You must set PBC to Off
To
1.
2.
3.
1.
2.
(See
"PBC"
on
page
Use 3
sequence.
Press A-B at your chosen
appears briefly on the TV
option
A
*
"
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
playing
at any chosen time
Press DISPLAY
2.
on
the disc:
The time search
during playback.
elapsed playing time.
Press v / V to select the time clock icon and
"
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
again
"
"-:--:-- appears.
screen.
Press A-B
Press A-B
4 to select the sound
or
box shows the
starting point.
during playback.
Time Search
1.
a
Press DISPLAY
To start
A-B
repeat
speakers (instead of
speakers normally required for multi-channel
from a home theater system).
To turn off the 3D Surround effect, select "Normal".
the
on
24).
Repeat
3D surround effect that simulates multi-
a
The sound
the random function
Chapter (Track) play-
3D Surround
3.
Video CD with
play repeatedly.
If you press > once during Repeat
back, the repeat playback cancels.
playback.
Note:
On
does not
:
the five+
to normal.
the unit selects another title
Random
Repeat Track/Group/Off
Track:
audio
.
-
channel audio from two stereo
Tip:
By pressing
-
Track
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on page
24).
?
1.
play repeatedly.
Notes:
Note:
Slow motion
repeats the
does not
:
DVD Audio Discs
> to select the
Repeat Chapter/Title/Off
chapter.
Chapter: repeats
?
Press .
2.
-
?
Video
(X) during playback.
now
title/chapter/all/track on a disc.
during playback to select a desired
DVD Video Discs
Slow Motion
1.
a
repeat mode.
To exit still motion mode, press PLAY.
2.
play
can
Press REPEAT
to cancel.
end
point.
screen
3.
Input
the
required
start time in
hours, minutes, and
seconds from left to
right. If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
and the
4.
Press ENTER to confirm.
Playback
starts from the
selected time.
31
Zoom
Use
1.
to
zoom
enlarge
Press ZOOM
the video
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
1600% size
→ screen
fit mode
→
DVD Features
Checking
the contents of DVD discs: Menus
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
MENU.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
Special
You
1.
change the way the image appears on the
you're playing a DVD movie. Press
3/4 to select between Normal, Enhanced, and
Maximum.
zoomed
4.
To
move
through
repeatedly
normal
or
?
Marker Search
To enter
a
Marker
may appear.
screen.
offers features such
menu
subtitle
a
menu, the
Otherwise, the disc
angles,
as camera
options,
and
point
the TV
screen
Press DISC MENU
on
the disc. The Marker icon appears
to enter up to nine
on
briefly. Repeat
To Recall
or
Clear
1.
During
disc
search
menu
Marked Scene
a
again
menu
is
displayed.
to exit.
Angle
If the disc contains
markers.
recorded at different
scenes
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
Changing
press SEARCH. The marker
appears on the screen.
the Audio
Language
playback,
2.
Within 10 seconds, press b / B to select
number that you want to recall or clear.
3.
Press ENTER and
marked
Press DISC MENU and the disc
camera
playback from up to nine memorized
To enter a marker, press MARKER at the
desired
scene.
playback
a
marker
starts from the
Or, press CLEAR and the marker
number is erased from the list.
4.
menu
Camera
start
can
points.
the b
Disc Menu
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD disc,
VR disc and movie file.
You
or use
Press TITLE to exit.
3.
CLEAR button.
Notes:
?
appears
spoken language and
chapters for the title.
press ZOOM
playback,
on
the
menu
The
2.
the
picture.
resume
number
selection. Then press
Press TITLE. If the current title has
when
Use the bBvVbuttons to
corresponding
highlight your
ENTER.
Title Menu
can
the
100% size
Screen fit mode:
screen
3.
Input
B v V buttons to
repeatedly during playback
language or audio track.
to hear
a
With DVD-RW discs recorded in VR mode that have
both
main and
a
Bilingual audio channel, you can
(L), Bilingual (R), or a mix of
Bilingual) by pressing AUDIO.
a
switch between Main
both
(Main
+
You
on
can play any marker by inputting its number
the marker search menu.
Press AUDIO
different audio
Subtitles
Press S-TITLE
repeatedly during playback
languages.
to
see
the
different subtitle
Note:
?
The subtitle file of the DivX file is
smi,
?
If there is
no
information
not read in the DivX
32
displayed only
srt and sub.
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
DVD Audio Discs
DVD Audio is
building on the success of DVD to provide high quality, uncompressed,
multi-channel audio for a new experience in audio
quality. A DVD Audio disc can be identified by the DVD
audio logo on the disc jacket or on the disc itself.
DVD Audio
a new
disc format
provide higher quality stereo than
Audio CDs with a sampling rate of up to 192kHz
(compared to 44.1kHz for CDs). DVD Audio digital
sound
can
(compared
A
to another GROUP
Moving
can
be delivered with up to 24 bits of data
to 16 bits for a standard CD).
Some DVD Audio discs divide content into different
groups. Your player enables you to quickly access different groups during playback via the on-screen
display.
1.
Press DISPLAY
2.
Press
3/4
Press 1/2
3.
a
during playback
to select
or
on
in
stop mode.
icon.
Group
the numbered buttons
(0-9)
to select
group number.
Note:
DVD Audio disc contains up to seven times
the data capacity of a CD. This additional space is
tent that
used for music, either Advanced Resolution multiquality that is closer to the artist's mas-
word. If the lock icon appears on the TV screen, enter
the password (sometimes you'll find it on the disc's
typical
channel sound
ter
recording
or
for
Audio discs contain
longer recordings. Many
on-screen
text, such
biographies, playlists, or lyrics. Some
contain photo galleries or video clips.
as
Sometimes the author of the disc creates hidden
DVD
jacket
artist
isn't dictated
DVD Audio discs
a
enjoy
maximum sound
quality
web
site).
by entering
This
a
password
by
con-
pass-
control
---
it is
Since the
authoring of DVD Audio Discs varies, some
display choices might not be availthe disc you're playing.
Operation
on-screen
and surround effect
of DVD Audio, you must use 5.1 channel analog audio
output (5.1CH AUDIO OUT jacks on the DVD/VCR
Combi
be accessed
cover or on a
able for
Note:
only
your DVD/VCR Combi receiver
function of the disc.
of the
To
can
receiver). If you use the DIGITAL OUT
(OPTICAL or COAXIAL) for your audio connection,
the sound will only be similar to CD-quality sound
even though you're playing a DVD Audio disc.
Viewing
another PAGE
Since DVD Audio discs
can
hold
a
lot of content, there
on the disc.
are
various ways to
see
what's available
1.
Press DISPLAY
during playback.
2.
Press 3/4 to select
3.
Press 1/2 to select
Page
a
icon.
page number.
What appears on the screen will vary from disc to
disc because the information available depends
upon the way the disc
was
created.
Note:
Since the
of the
authoring of DVD Audio Discs varies, some
display choices might not be availthe disc you're playing.
on-screen
able for
33
Playing
an
Audio CD
or
MP3/WMA
Disc
MP3 / WMA disc
limited
?
as
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
player
is
Sampling frequency: within 8 48 kHz (MP3),
48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
within 32
The DVD
with this
compatibility
follows:
-
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
screen. Press v / V to select a track then press
TV
PLAY
or
ENTER and
?
?
starts.
playback
AUDIO CD
0:52:07
1/12
List
Program
creates
Track1
Track2
Track3
?
Track4
File
an
names
and must
Track5
Track6
Track7
?
Clear All
Track8
PROGRAM
They
ISO 9660 file
should have
incorporate
system.
a
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
folder, and press ENTER
a
the folder contents.
see
Press v / V to select
ENTER.
Playback
track then press PLAY
a
or
starts.
This DVD
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
PROGRAM
Info
Edit
should
Tip:
?
owner.
If you
are
in
a
file list
return to the Folder
the MUSIC
on
list,
menu
the v / V to
use
and want to
highlight
and
press ENTER.
?
Press DISC MENU to
?
On
on
When
top of the
playing
titles, you
34
to the next page.
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO
word
?
move
a
menu
file
can see
is
highlighted.
containing
information such
the information
is
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
in order to download MP3 / WMA files
by pressing
as
track
DISPLAY.
always
be
sought
from the
copyright
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
1.
2.
Press RANDOM during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
Press PAUSE/STEP
To return to
press
2.
during playback.
playback, press PLAY,
PAUSE/STEP again.
ENTER
To return to normal
repeatedly
or
playback, press RANDOM
disappears from the
until RANDOM
menu screen.
Tip:
Moving
1.
By pressing
to another Track
Press .
>
or
the next track
briefly during playback to go to
beginning of the
to return to the
or
current track.
2.
Press . twice
previous
3.
In
>
during
another track and
case
briefly
step back
to the
of audio CD, to go
directly to any track,
using the numbered but-
playback, the
playback.
unit selects
random
A-B
1.
To
2.
Press A-B
track.
enter the track number
tons
to
Repeat
random
resumes
repeat a sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
again at your chosen end point. The
icon and "A-B" appear on the menu
screen, and the sequence begins to play
Repeat
(0-9).
repeatedly.
Repeat Track/All/Off
You
1.
can
play
a
3.
track/all
on a
Press REPEAT when
disc.
playing
a
disc. The
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
repeat
menu screen.
icon appears.
2.
Press REPEAT to select
?
?
?
a
desired
repeat mode.
To
Track:
repeats the current track
All: repeats all the tracks on a disc.
Off(No display):
does not
repeat playback
once
Track
a
3D surround effect that simulates
speakers (instead
speakers normally required for
multi-channel audio from a home theater system).
of the five+
play repeatedly.
during Repeat
produce
multi-channel audio from two stereo
Note:
If you press >
3D Surround
playback,
the
1.
cancels.
2.
Press AUDIO
on
To return to normal
playback, press AUDIO
disappears from
repeatedly
Search
1.
during playback.
"3D SUR." appears
the
until "3D SUR."
menu screen.
the
menu screen.
Press and hold .
or
> for about two seconds
during playback.
The
2.
player
will
now
go into SEARCH mode.
Press and hold .
or
>
repeatedly
to select
the
required speed: mX2, mX4, mX8
(backward) or MX2, MX4, MX8 (forward).
Search speed and direction are indicated on the menu
screen.
3.
To exit SEARCH mode, press PLAY.
35
Repeat Programmed
Programmed Playback
1.
1.
Insert
a
disc.
Audio CD
MUSIC
or
menu
again,
Program
to exit the
mark will
E
1.
Edit mode.
2.
0:00:00
Off(No display):
a
desired
repeat mode.
does not
play repeatedly.
a
once
during Repeat
Track from
Video CD
:
playback,
the
List
Press PROGRAM in the
Program
Press B to
Program
Track
stop mode
to
Edit mode.
move
to the
"Program"
list.
1/12
List
E
Program
E
Program
Track1
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
3.
2-Music2
Track5
Use v/V to select the track that you wish to
"Program" list.
erase
from the
4-Music4
Track6
5-Music5
Track7
4.
6-Music6
Clear All
Track8
Clear All
7-Music7
DISPLAY
Audio CD Menu
PROGRAM Edit
Info
MP3/WMA Menu
Video CD: Press PROGRAM while
stopped. The program
PROGRAM to exit the
playback
1.
is
menu.
2.
Note:
On
a
setup
Video CD with PBC, you must set PBC to Off on
menu to use the programmed playback (See
"PBC"
on
24).
page
VIDEO CD
List
E
Program
Track1
Track5
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
Select
a
track
on
the "List", then press ENTER to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
Press B.
Select the track you want to start
"Program" list.
Press PLAY
or
ENTER to start.
playing
on
the
Playback begins
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
"Program"
To
resume
playback,
list have
played
normal
playback
select
a
once.
from
track of CD
and then press PLAY.
programmed
(or MP3/WMA) list
in
the
Follow
to
erase
Complete Program
steps
List"
as
Use
3/ 4
The
the
Repeat
additional tracks
the list.
Erasing
appears. Press
menu
Press CLEAR.
on
PROGRAM Edit
36
?
enter
MUSIC
1/12
List
disc.
repeats the current track
repeats all the tracks on programmed list.
Erasing
then the
AUDIO CD
6.
All:
If you press >
Press PROGRAM
5.
Track:
?
repeat playback cancels.
E
Note:
4.
?
The
0:52:07
a
Note:
appears.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
3.
Press REPEAT to select
Press PROGRAM.
disappear
playing
repeat icon appears.
MP3/WMA Discs:
or
AUDIO CD
2.
2.
contain 30 tracks.
can
program
Press REPEAT when
The
The program function enables you to store your
favorite tracks from any disc in the player memory. A
Tracks
1-2 of
"Erasing
a
List
Track from
Program
above.
to select "Clear
complete Program
All", then press ENTER.
for the disc will be erased.
Note:
The programs
removed.
are
also cleared when the disc is
Viewing
Using
JPEG Disc
a
this DVD
Player
you
Moving
view discs with JPEG
can
1.
Press .
or
>
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
during viewing a picture
to the previous file.
once
advance to the next file
files.
JPEG
to another File
to
or
JPEG
Zoom
screen.
PHOTO
List
Use
zoom
(see
32
the
to
enlarge
page)
photo image.
Preview
To rotate
JPEG Folder 1
JPEG Folder 2
picture
>>>
JPEG Folder 3
Press v / V
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
JPEG Folder 7
during showing
clockwise
or
a
to rotate the
picture
counter clockwise.
JPEG Folder 8
To listen to MP3/WMA music
watching picture
JPEG
2.
Press v / V to select a folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Slide Show
1.
move
or
PLAY.
to
move
files while
on
listening
the
same
containing
to MP3/WMA
disc.
the two
types of file in
player.
2.
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
Playback
STOP is
to the next page.
display
starts. The
a
PHOTO
photo
menu.
Operation
file.
icon then press ENTER.
will continue until
playback
pressed.
Tip:
JPEG
Use vVbBto
display
Insert the disc
the
If you want to view a particular file, press
v / V to highlight a file and press ENTER
Press DISC MENU to
can
music files recorded
and press ENTER.
highlight
3.
on
You
To listen to
highlight
the
(Slide Show)
then
press ENTER.
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
Tip:
?
There
are
(Normal)
?
>
Speed options
(Slow).
: >>>
(Fast),
>>
On
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO
word
?
three Slide
and
on
Press
top of the
menu
is
JPEG disc
limited
?
compatibility
with this
player
is
follows:
as
Depending
upon the size and number of JPEG
a long time for the DVD player
files, it could take
highlighted.
to read the disc's contents. If you don't
see an on-
after several minutes, some of the
files may be too large
reduce the resolution of
the JPEG files to less than 2M pixels as 2760 x
screen
RETURN, information of file is hidden.
display
---
Still Picture
1.
2048
Press PAUSE/STEP
The
2.
JPEG
player
will
now
during
slide show.
?
go into PAUSE mode.
To return to the slide show, press PLAY
PAUSE/STEP again.
or
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 650.
press
?
Some discs may be incompatible due to a
recording format or the condition of disc.
different
?
Ensure that all the selected files have the
extensions when
?
If the files have
rename
?
File
them
names
are
Windows
into the CD
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
able to be read
the files
copying
by
shown
".jpg"
extension will not be
this DVD
as
JPEG
player. Even though
image files in
Explorer.
37
5.1
Speaker Setup
This
to
chapter includes important reference information
help you set your DVD/VCR Combi receiver.
If you connected
following settings
for the built-in 5.1 channel
how far the sound has to travel to reach your set lisThis allows the sound from each speaker
Press b / B to
1.
Press SETUP. The
2.
Use v / V to select the AUDIO
3.
move
setup
menu
speaker.
[0.3(1)m(ft)
appears.
option
Use v / V to select the
move
then
to the third level. "Select" is
Speaker Setup
menu
→
AUDIO
Size
Volume
Distance
Test
Front L
Small
dB
0
m(ft)
0.6(2)
Off
Select
5.
Move
Return
Use b / B to select the desired
Enter
speaker.
v / V / b / B buttons.
6.
Adjust options using
7.
Press RETURN to return to the
Speaker
menu screen.
selection
Select a speaker that you want to adjust. (Front
speakers (Left), Center Speaker, Front speakers
(Right), Rear speakers (Right), Rear speakers (Left),
or SubWoofer)
Note:
Certain
speaker settings are prohibited by
Digital licensing agreement.
the
Dolby
Size
Since the
change
speaker settings
settings.
are
fixed, you
cannot
the
Volume
Press b / B to
speaker. (-6dB
38
Press b / B to test the
Front Left
appears.
Speaker
adjust the output
6dB)
~
6.0(20)m(ft)]
level of the selected
signals
of each
the volume to match the volume of test
rized in the
Press ENTER and 5.1
time.
Test
Speaker Setup option
highlighted.
4.
-
adjust
same
the Distance of the selected
then press
to the second level.
press B to
to your DVD/VCR Combi
tening point.
to reach the listener at the
surround decoder.
B to
speakers
receiver, setting the Distance lets the speakers know
Speaker Setup
Make the
Distance
speaker. Adjust
signals memo-
system.
(L)
Rear Left
→
(R)
Center
→
Front Right (R)
Right (L) → SubWoofer.
→
Rear
Maintenance and Service
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
using
using
the DVD-Video format that have been finalized
a
?
This unit will
Insert
menu
a
play DVD-RW discs recorded using
Recording (VR) format.
disc and close the
appears
on
the TV
tray. The TITLE LIST
When
shipping
Please
save
?
ENTER and
playback
Press TITLE to
move
a
track then press PLAY
or
starts.
to the list
menu.
Do not
played
in this
play-
packing
volatile
liquids
such
as
insecticide
the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
the unit
surfaces
player, use a soft, dry cloth. If the
extremely dirty, use a soft cloth lightly
with a mild detergent solution.
are
moistened
er.
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of discs.
CPRM is
a
copy protection system (with scramble system)
the recording of 'copy once' broadcast
only allowing
programs. CPRM stands for Content Protection for
Recordable Media.
play
is CPRM
compatible,
which
means
that you
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
strong solvents such
use
thinner,
as
these
as
might damage
alcohol, benzine,
the surface of the
only be played on
specifically compatible with CPRM.
can
Maintaining
the Unit
The DVD
can
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
only
Do not
or
unit.
What is 'CPRM'?
can
carton and
To clean the
Unfinalized DVD-R/RW discs cannot be
This
use
near
Cleaning
Note:
?
original shipping
the exterior surfaces clean
spray
Press v / V to select
the
the unit
factory.
Keeping
?
?
before
the Unit
Handling
at the
3.
chapter
service technician.
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
screen.
DVD-VR
2.
a
DVD-recorder.
the Video
1.
Refer to the information in this
contacting
player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For details,
please
use.
contact your nearest authorized
service center.
39
Playing
a
DivX Movie Disc
DivX disc
Using
this DVD
Player
you
can
play
DivX disc.
?
Insert
1.
a
appears
disc and close the
on
the TV
tray. The MOVIE
menu
720x576
?
player
is limited
Available resolution size of the DivX file is under
screen.
MOVIE
with this
compatibility
follows:
as
The file
(W
x
name
H) pixel.
of the DivX subtitle is available
by
56 characters.
0:00:00
List
Movie Folder 1
?
Movie Folder 2
Movie Folder 3
If there is
impossible
code to express in the DivX
as
mark on the
"
file, it may be displayed
Movie Folder 4
"
_
Movie Folder 5
display.
Movie Folder 6
Movie Folder 7
Movie Folder 8
?
If the number of the
frame is
screen
second, this unit may
normally.
per 1
Press v / V to select
2.
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
?
?
If you want to view a particular file, press
v / V to highlight a file and press ENTER
or
PLAY.
Tip:
Press DISC MENU to
?
On
a
CD with
switch
move
highlighted.
video
or
audio is
*
GMC?
encoders, like DivX
There
are
called
1-point, 2-point,
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you
can
MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
is
interleaved, either
If the file is recorded with GMC, the unit
supports only 1-point of the record level.
MPEG4
?
operate
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
Press STOP to exit.
4.
30
outputted.
press ENTER.
3.
over
If the video and audio structure of recorded
file is not
and
highlight
not
Playable
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
?
-
within 32
?
Bit rate: within 8
32
40
48kHz
(WMA)
320kbps (MP3),
192kbps (WMA)
-
-
-
Additional Features-VCR part
On Screen
You may
Video Doctor
Display
easily display
the current time
or
tape
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and operational mode of your DVD/VCR Combi receiver will
appear on the TV screen. If a recording is taking place
these On Screen
Displays
the
tape.
1.
Press CLK/CNT to
(Self-Diagnosis)
This feature informs you that there is a problem with
your DVD/VCR Combi receiver. These error
messages will appear
1.
will not be recorded onto
on
the TV
screen.
Press i.
Press 1
or 2
to select Dr.
Press ENTER.
Press CLK/CNT
display.
repeatedly
to
VIDEO DOCTOR
the
cycle through
HEAD STATUS
The tape counter and amount of
tape left will appear if there is a tape loaded.
display options.
TAPE STATUS
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
P
SET
R
REC
Displays
majority of the On Screen
leaving only the clock or tape
ON
OFF
After 3 seconds the
will clear
counter and the amount of
Press CLK/CNT
the TV
again
to
tape left
remove
all
on
the
screen.
displays
2.
ACMS
NIC
fOSD
2.
Pr-12
OK
OPR
Press
3 or 4
to check
a
problem.
HEAD STATUS
from
O
screen.
PLEASE CLEAN:
Clean your video heads.
TAPE STATUS
Tape Counter Memory Stop
The
O
Insert
displayed on the
time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
Digital Tape Counter can
display window instead of the
on
1.
the
be
tape with its protection tab in place
NO. OF TIMER PROGRAMME
Shows the number of timer
recording.
NEXT TIMER PROGRAMME
O
Press CLK/CNT.
Press PLAY
or
start
counter
recording.
will display the
actual
play
PR-01 26 10:00~11:00SP
Shows the current status of timer
Press CLEAR to set the counter to 0:00:00.
tape
a
O2
tape.
The
NOT RECORDABLE:
time
3.
recording.
Press i
in hours, minutes and seconds.
2.
Press STOP when
playback
or
recording
is
complete.
Press BACKWARD.
The
tape will rewind and automatically stop when
the counter returns to 0:00:00.
41
Hi-Fi Stereo Sound
System
Your DVD/VCR Combi receiver will record and
back Hi-Fi stereo sound. In addition it has
NICAM
play-
stereo
stereo sound decoder. This allows you
digital
to record and
a
playback
the sound in several different
ways. Video cassettes recorded on your DVD/VCR
Combi receiver will have a normal mono audio track
and two VHS Hi-Fi stereo audio tracks. These stereo
tracks allow you to make audio recordings in Hi-Fi
stereo or bilingual mode from a TV broadcast, stereo
audio
system, video disc
another DVD/VCR Combi
or
receiver.
1.
Your DVD/VCR Combi receiver's NICAM
digital
sound decoder allows you to enjoy broadcasts
with NICAM sound, as well as standard stereo,
bilingual
and
mono
sound received
played
or
the TV
on
sound. The
particular type of
briefly discouple of seconds:
that recorded will be
for
screen
a
STEREO NICAM
Sound is
recorded
automatically
stereo and
mono
on
tracks of the video
the Hi-Fi
tape.
BIL NICAM
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
the Hi-Fi tracks and the
on
track of the video
tape without any separa-
tion.
2.
Press AUDIO
repeatedly
until the desired audio
mode appears.
3.
The choice is STEREO, LEFT, RIGHT and
MONO. In BIL NICAM playback the primary lan-
guage is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO.
The
primary language
will be
output from both
channels when the audio
is MONO.
Please note that when
the
setting
adjusting
tracking
control Hi-Fi stereo sound may revert to MONO.
42
Additional Features
Last Scene
Memory
This player memorizes last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the player or switch
off the
If you load
scene is
player.
memorized, the
a
disc that has the
scene
recalled.
automatically
Note:
This
player
does not memorize the
switch off the
player
before
scene
commencing
of
to
a
disc if you
the disc.
play
Screen Saver
The
appears when you leave the DVD
mode for about five minutes.
screen saver
in
player
Stop
Video Mode
Setting
With certain discs, the playback picture may be flickering or Dot Crawl is shown on straight lines. That
means
Vertical
interpolation
or
De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
video mode.
To
change
the video mode, press and hold
during disc playback.
DISPLAY about 3 seconds
The
on
new
video mode number selected is
the TV
has
until
displayed
quality
procedure
Check whether the video
screen.
improved. If not, repeat the
picture quality is improved.
Video mode sequence:
MODE1 → MODE2 → MODE3
above
→
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
MODE1
or
video
MODE2
:
Description
The
source
material)
:
of each Video Mode
material of the DVD video
(film
material
is determined from disc information.
Suitable for
playing film based content or video
by the progressive scan method.
based material recorded
MODE3
:
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
setting only
works when the
Scan mode is set to "On"
on
the
setup
menu.
43
Copying
from DVD To VCR
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
sure
setup
to set
protected,
2.
3.
on
the
menu.
If the DVD you
1.
Scan" to "Off"
"Progressive
to copy is copy
you may not be able to copy the disc.
are
attempting
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
Insert VHS Tape
Insert a blank VHS
Copy
videotape
the DVD to VHS
from another video
Recording
recorder
With this video recorder you can make recordings
from an external source, such as copying from another
Tape
or a
camcorder.
Note
In the
following description, this video recorder will be
recording and will be referred to as VCR
The other appliance will be used for playback and
one
B.
used for
will be referred to
1.
as
VCR A.
VCR A should be connected to the AUDIO L/R
(VCR
panel
IN
AV1)/VIDEO (VCR
IN
AV1)
on
the
rear
of your unit or AUDIO IN (L(MONO)/R) /
VIDEO IN on the front panel of your unit.
into the VCR deck.
2.
Press the REC/ITR button.
video recorder
Insert the recorded
tape into VCR A and
a
blank
tape into VCR B.
The DVD will go into Play mode and the
DVD/VCR Combi receiver will go into Record
mode.
If the DVD disc
to press the
3.
appears, you may need
button manually to begin
menu
Play
Press AV until the socket you wish to record from
is
displayed. (VCR B)
AV 1 for
AV1)/
copying.
recording from AUDIO L/R (VCR IN
(VCR IN AV1) terminals on the
VIDEO
of your unit.
AV 2 for recording from AUDIO IN
Note:
VIDEO IN terminals
If you press the REC/ITR button, be sure this
DVD/VCR Combi receiver in DVD mode.
4.
To start
Stop
the
Copy
press the REC/ITR
VCR A.
on
VCR B
Process
When the DVD is finished
playing,
press STOP to
end the copy.
You must stop the Copy process manually
when the DVD movie ends, or the unit may
replay and record over and over again.
44
on
(L(MONO)/R)/
the front of your unit.
recording,
and PLAY
4.
on
rear
5.
When you want to finish
on both video recorders.
copying,
press the STOP
Presetting
You
can
ing,
make
preset
sure
the Radio Stations
50 stations for FM and AM. Before tun-
Preset radio stations in the DVD/VCR Combi receiver
that you have turned down the
memory first
volume.
1.
(see "Presetting
radio stations"
the
on
left).
Press FM/AM
the remote control
on
front
on
to the Radio
Listening
panel until the frequency
the display and TV screen.
or on
the
1.
band appears
Press FM/AM
the remote control
on
front
on
panel until the frequency
the display and TV screen.
or on
the
band appears
The last received station is tuned in.
2.
Press
3 / 4 on
the remote control
repeatedly
to
select the preset station you want.
Each time you press the button, the DVD/VCR Combi
RADIO
AM
receiver tunes in
01
522kHZ
3.
OK, CLEAR
,
one
preset station
at
a
time.
Adjust the volume by rotating VOLUME on the
front panel or by pressing VOLUME + or on
the remote control repeatedly.
-
To Clear the Stored Radio
Stations
RADIO
FM
Press
3 / 4 on
Press FM/AM
the remote control
on
front
on
OK, CLEAR
,
2.
1.
06
108. 00MHZ
panel until the frequency
the display and TV screen.
or on
the
Operation
band appears
the remote control to select your
desired radio channel.
3.
Press FM/AM
front
4.
panel
the remote control
on
Hold down PRESET
hold down 1 and
1
2
and
2
seconds,
automatically.
or
or on
the
to select the desired band.
( 3/ 4 )
on
the front
RADIO
panel
FM
or
the remote control for
station is searched for
on
a
,
2.
06
108. 00MHZ
Press 3/4
OK, CLEAR
on
the remote control to select your
desired station.
RADIO
FM
06
87. 50MHZ
RADIO
,
AM
OK, CLEAR
,
5.
Press MEMORY
on
10
522kHZ
OK, CLEAR
the remote control.
3.
Press CLEAR the remote control to clear the
stored radio station.
6.
Repeat steps
2 to 5 to store other stations.
RADIO
FM
10
98. 00MHZ
,
OK, CLEAR
Note
While record
or
record pause mode, the CLEAR
function may not be
operated.
45
into
Tuning
1.
a
Press FM/AM
Station
on
Manually
the remote control
front
on
2.
panel until the frequency
the display and TV screen.
Press FM/AM
front
3.
panel
on
or on
the
band appears
the remote control
or on
the
to select the desired band.
Press PRESET (3/4) on the front panel or
press 1 and 2 on the remote control to tune
in the desired station.
into
Tuning
a
Station
Hold down PRESET
down 1 and 2
seconds, and
a
on
(3/4)
on
Automatically
the front
panel
the remote control for 1
station is searched for
or
or
hold
2
automatically.
Note
The search may not
weak
stop
at
a
station with
a
very
signal.
Mute
Press MUTE to mute your unit.
You can mute your unit in order, for
answer
the
telephone,
display.
appear in the
46
example,
to
MUTING and MUTE indicator
Reference
Language Codes
Use this list to
input your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
following
initial
settings:
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
Country
Choose
a
8373
8471
8479
Codes
country code from this list.
Country
Afghanistan
Argentina
Code
Code
Country
Malaysia
Code
ET
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Country
Code
AR
Country
Ethiopia
Fiji
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
AF
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
UG
Croatia
HR
Jamaica
JM
Ukraine
UA
Japan
JP
Paraguay
Philippines
PY
CZ
PH
United States
US
Denmark
DK
Ke nya
KE
Poland
PL
Uruguay
UY
Ecuador
EC
Kuwait
KW
Portugal
PT
Uzbekistan
UZ
Egypt
EG
LY
Romania
RO
Vietnam
VN
El Salvador
SV
Libya
Luxembourg
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
TR
47
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
problem
before
Cause
Symptom
Correction
No power.
The power cord is disconnected.
The power is on, but
the DVD/VCR Combi
No disc is inserted.
Insert
No
disc
the power cord into the wall outlet
Plug
securely.
tape is inserted.
picture.
disc or tape. (Check that the
tape indicator in the display
a
or
window is
receiver does not work.
No
service.
contacting
The TV is not set to receive DVD/VCR
Select the
Combi receiver
on
signal output.
the TV
lit.)
appropriate video input
the picture from the
mode
so
DVD/VCR Combi receiver appears
the TV screen.
TV/VCR mode for DVD/VCR Combi
Press the TV/VCR button
receiver is set to TV.
control
TV
on
the remote
on
repeatedly to choose VCR mode.
indicator disappears in the display
window.
Connect the video cable
The video cable is not connected
securely.
securely.
No sound.
The connected TV power is turned off.
Turn
The
Select the correct
on
the TV.
cable is not set to receive DVD/VCR
Combi receiver signal output.
input mode on the audio
you can listen to the sound from
the DVD/VCR Combi receiver.
The audio cables
Connect the audio cables
equipment
connected with the audio
are
not connected
receiver
so
securely.
securely.
The power of the equipment connected
with the audio cables is turned off.
The
digital audio output
position.
is set to the
wrong
The
playback picture
is
poor.
The disc is
Tape
heads
Tape
is
a
receiver does not start
playback.
or was
recorded
on
unplayable
connected with
Set the
digital audio output to the
position, then turn on the DVD/VCR
Combi receiver again by
pressing POWER.
Use v/V for manual
adjustment
Insert
No disc is inserted.
No tape is inserted.
An
equipment
Clean video heads.
another VCR.
The DVD/VCR Combi
the
Clean the disc.
dirty.
rental
on
the audio cables.
correct
dirty.
are
Turn
a
while
disc
or
tracking
tape is playing.
tape. (Check that the
disc or tape indicator in the
window is lit.)
Insert
disc is inserted.
a
playable
disc.
display
(Check
the disc
type, color system, and Regional code.)
The disc is
placed upside
The disc is not
placed
Place the disc with the
down.
within the
guide.
Place the disc
inside the
dirty.
Clean the disc.
The
level is set.
Cancel the
rating
Video Head
Cleaning
Whenever
video cassette is inserted into
the disc
side down.
tray correctly
guide.
The disc is
Rating
on
playback
Rating
function
or
change
the
level.
or ejected from your VCR the video head is automatically cleaned.
cleaning should not be necessary.
However dirt accumulating on the head after a long period of time can cause the playback picture to become
blurred or broken up. High quality video cassette tapes will not normally deposit dirt onto the video head, but old
or damaged tapes might.
a
This should
48
mean
that additional head
Cause
Symptom
This remote control
uses
the
The remote control is not
remote
same
buttons for VCR and
DVD functions
(ex. PLAY).
Correction
sensor
pointed
at the
Point the remote control at the remote
of the DVD/VCR Combi receiver.
sensor
of the DVD/VCR Combi receiver.
The remote control is too far from the
DVD/VCR Combi receiver.
Operate
(7 m).
There is
Remove the obstacle.
an
obstacle in the
path
of the remote
the remote control within 23 ft
control and the DVD/VCR Combi receiver.
The batteries in the remote control
the batteries with
Replace
are
new ones.
exhausted.
This remote control
the
uses
When
using a VCR, first press the VCR
button. When using a DVD, first press
the CD/DVD button.
same
buttons for VCR and DVD functions
(ex. PLAY).
The
tape does
not
The DVD/VCR Combi receiver is in the
Press PAUSE/STEP
during recording.
RECORD PAUSE MODE.
recording.
The
The
or
tape will
run
not rewind
fast-forward.
The
tape is already fully rewound
fast-
or
Check the
playback picture
resume
tape.
If
you're using only
the RF cable for
con-
Set the TV to the Video channel
nection.
(see
Noise appears
visual search.
This is normal.
Turn camcorder
during
16).
p.
on
and
operate
properly.
Noise appears during
normal playback.
The automatic
Breaks
There is
noticeable
in Hi-Fi soundtrack.
Recording
to
forwarded.
does not appear while
the tape is running.
are
(X)
The automatic
no
cannot be
The
mode is
tape loaded,
has had its record
started.
mode is
tracking
tracking
safety
or
the
engaged.
engaged.
Try
manual
tracking (see
p.
26).
tape loaded
Try
manual
tracking (see
p.
26).
tab removed.
(another VCR, camcorder)
properly connected.
source
not been
has
Insert
a
cover
the hole where the tab
tape,
or
using
adhesive
tape,
was
removed.
Tape-to-tape editing
not possible.
Timer
recording
is
won't
work.
The clock/or the timer have been set
Confirm that the camcorder is
incorrectly.
connected.
The timer is not
Re-perform
tings.
engaged.
properly
the clock and/or timer set-
Press POWER and confirm that the
The loaded
tape has had its record safety
timer indicator is
displayed
tab removed.
DVD/VCR Combi receiver's
Insert
a
Audio mode is not set
insert
a
properly.
on
the
Display.
pate with adhesive tape, or
tape with the record safety tab
intact.
Select "STEREO"
No Hi-Fi sound.
ing
AUDIO
on
by repeatedly pressthe remote control.
Moisture Condensation
Moisture condensation
?
When the DVD/VCR Combi receiver is moved from
cold
?
place
Under
to
a warm
extremely
In locations where moisture condensation may
can occur:
a
?
the DVD/VCR Combi receiver
plugged
into
an
AC power outlet with POWER On.
This will help prevent condensation.
place.
humid conditions.
Keep
occur:
?
When condensation has occurred, wait a few hours
for the DVD/VCR Combi receiver to dry before
using
it.
49
Specification
General
Power
requirements
consumption
Dimensions (approx.)
Mass (approx.)
Operating temperature
Refer to main label
Power
Refer to main label
Timer
430X81X360mm(wxhxd)
5.8 kg (17.6 lbs)
5˚C to 40˚C (41˚F to 104˚F)
24-hour display type
Operating humidity
5%to90%
DVD Section
Laser
Semiconductor laser,
PAL/NTSC
Signal system
Frequency response
wavelength
650
nm
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto20kHz
CD:8Hzto20kHz
Signal-to-noise
ratio
More than 65 dB
Harmonic distortion
Less than 1.0%
Dynamic
More than 60 dB
range
(analog
out connectors
only)
(DVD, CD)
Outputs
S-VIDEO OUT
COMPONENT VIDEO OUT
(PROGRESSIVE SCAN)
(Y) 1.0 V (p-p), 75 ohms, negative sync, Mini DIN 4-pin
(C) 0.3 V (p-p) 75 ohms
(Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
x
1
VCR Section
Head
6 heads helical
system
system
Television
Recording
scan
PAL/SECAM colour
format
azimuth
system
system
PAL/MESECAM
RF OUT
G
RF Modulator
UHF 22
Tape speed
PAL/MESECAM; 23.39 mm/s (SP), 16.69 mm/s (LP)
68
-
(Adjustable)
NTSC
(Playback only); 35.35 mm/s (SP), 16.67
(EP)
SP: 4 h (E-240 tape), LP: 8 h (E-240 tape)
About 180 min (E-180 tape)
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
mm/s
11.12 mm/s
Maximum
recording
time
Rewind time
Input
level
Output level
Signal-to-noise
AUDIO: -6.0 dBm, more than 47 kohms
VIDEO: 1.0 V(p-p), 75 ohms, unbalanced
ratio
VIDEO: More than 43 dB
AUDIO: More than 72 dB
More than 42 dB
Dynamic
range
(Hi-Fi)
(Mono)
AUDIO: More than 85 dB
Tuner Section
Tuning
FM: 87.5
range
AM: 522
Intermediate
frequency
-
-
108.0 MHz
1611 kHz
FM: 10.7 MHz
AM: 450 kHz
Amplifier Section
Stereo mode
Surround mode
90W+90W(8ohmat1kHz,THD10%)
Front: 90W + 90W (THD 10%)
Centre: 90W
Surround: 90W
+
Subwoofer: 150W
50
90W
(4
(8
ohm at 1 kHz, THD
ohm at 30 Hz, THD
10%)
10%)
(LP),
Speaker
Section
Satellite (LHS-CX643T)
Type
Impedance
Frequency Response
2
5
Way
Speaker
8Ω
120
-
20,000 Hz
Sound Pressure Level
85 dB/W
Rated
90W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
180W
H
x
x
326x1500x326mm
D)
13
Centre speaker (LHS-CX643C)
Type
Impedance
Frequency Response
2
kg
5
Way
Speaker
8Ω
120
-
20,000 Hz
Sound Pressure Level
85 dB/W
Rated
90W
Input Power
Max. Input Power
Net Dimensions (W
Net Weight
(1m)
(1m)
180 W
H
x
x
600x152x154mm
D)
2.6
kg
Passive Subwoofer
(LHS-CX643W)
Type
Impedance
Frequency Response
1
Way
1
Speaker
4Ω
40
1,500 Hz
-
Sound Pressure Level
82 dB/W
Rated
150W
Input Power
Max Input Power
Net Dimensions (W
Net Weight
(1m)
300W
x
H
x
350x482x350mm
D)
9.6
kg
Accessories:
AM/FM aerial,
Design
and
Speaker
cable
specifications
are
Manufactured under license from
Dolby
6, RCA cable, Remote control, Batteries (AAA)
x
subject
Dolby
to
change
Laboratories.
x
2
without notice.
"Dolby",
"Pro
Logic",
and the double-D
symbol
are
trademarks of
Laboratories.
"DTS" and "DTS
Digital
Out"
are
trademarks of
Digital
Theater
Systems,
Inc.
51
P/N: 3834RH0086F
Printed in Korea
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement