Advertisement
Advertisement
LH-T551TB JA3ULLA_English DVD/CD RECEIVER OWNER'S MANUAL MODEL: LH-T551TB (Main Unit: LH-T551 Speakers: LHS-55TBS, LHS-55TBC, LHS-55TBW) R USB Before connecting up, operating or repairing product, please read this instruction booklet carefully and completely. this P/N: 3834RH0109X Precautions Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user about the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric This shock to persons. The exclamation mark within is intended to alert the important operating an equilateral triangle about the presence of and maintenance (servicing) user instructions in the instructions accompanying the About the Indicates hazards itself product. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK symbols or for instructions likely to cause damage. harm to the unit other material Indicates special operating Indicates tips features of this unit. HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: Do not install this equipment in such as a book case or similar unit. a confined space and hints for making the task easier. Manufactured under license from Dolby Laboratories. "Dolby", "Pro Logic", and the double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished works. 1997 Dolby Laboratories. All rights reserved. CAUTION: This DVD/CD receiver To employs a laser system. proper product, please read this owner's carefully and retain it for future reference. Should the unit require maintenance, contact an authorized service location (see service procedure). ensure use Performing controls, adjustments, or carrying out procedures specified herein may result in hazardous radi- other than those ation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. Visible laser radiation when open. DO NOT STARE INTO BEAM. CAUTION: The apparatus should not be exposed to water (dripping or splashing) and no objects filled with liquids, such vases, should be 1992- Manufactured under license from Digital Theater Systems, Inc. US Pat. No. 5,451,942 5,956,674, 5,974,380, 5,978,762 and other worldwide patents issued and pending. "DTS" and "DTS Digital Surround" are registered trademarks of Digital Theater Systems, Inc. Copyright 1996, 2000 Digital Theater Systems, Inc. All rights reserved. of this manual as Copyright placed on the apparatus. OTES ON COPYRIGHTS: It is forbidden by law to copy, broadcast, show, broadcast play in public, or rent copyrighted material without permission. This product features the copy protection function developed by Macrovision. Copy protection signals are recorded on some discs. When recording and playing the pictures of these discs on a VCR, picture noise will appear. This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. via cable, SERIAL NUMBER: The serial number is located on the back of this unit. This number is unique to this unit and not available to others. You should record requested information here and retain this guide as a permanent record of your purchase. Model No. Serial No. 2 ___________________________________ ___________________________________ Table of Contents Introduction SafetyPrecautions.........................2 TableofContents..........................3 AudioCDandMP3/WMADisc...............21 Playing an Audio CD and MP3/WMA Disc . . . . . 21 BeforeUse..............................4-5 Pause.............................21 PlayableDiscs...........................4 MovingtoanotherTrack...............21 RepeatTrack/All/Off...................21 Precautions.............................5 NotesonDiscs..........................5 Search.............................21 AboutSymbols..........................5 FrontPanelandRearPanel..................6 JPEGDiscOperation......................22 ViewingaJPEGdisc.....................22 RemoteControlOverview....................7 SlideShow.........................22 StillPicture.........................22 Preparation Connections............................8-11 TVConnections.........................8 OptionalEquipmentConnections . . . . . . . . . . . .9 Movingtoanotherfile.................22 Torotatepicture......................22 ProgrammedPlayback.....................23 RepeatProgrammedTracks................23 .23 ErasingaTrackfromProgrammeList 23 Erasing the Complete Programme List DivXDiscOperation.......................24 SpeakerSetup............................25 . AerialConnections........................9 10 Assembling and Connecting to the Speakers .10 ToHangtheCentreSpeakeronawall. SpeakerSystemConnection...............10 SpeakerPositioning......................11 BeforeOperation.......................12-17 Mini Glossary for Audio Stream & Surround . . . . . . . . . Mode.................................12 SoundMode...........................12 On-ScreenDisplay.....................13 InitialSettings........................14-17 GeneralOperation....................14 Language..........................14 Display..........................14-15 Audio..............................15 Lock(ParentalControl)................16 Others.............................17 Operation DVDorVideoCDOperation...............17-20 PlayingaDVDandVideoCD...............17 GeneralFeatures.....................18-20 MovingtoanotherTITLE/GROUP. Moving to another CHAPTER/TRACK . . . . . . . . . . .18 . 18 SlowMotion.........................18 Still Picture and Frame-by-Frame Playback . 18 Search.............................18 Repeat............................18 RepeatA-B.........................19 TimeSearch........................19 MarkerSearch.......................19 Zoom..............................19 SpecialDVDFeatures....................20 TitleMenu..........................20 DiscMenu..........................20 ChangingtheAudioLanguage. ChangingtheAudioChannel. . . . . . . . . . . . . . . . . . . . .20 .20 Subtitles...........................20 DVDAudioDiscs........................20 . . . . . . . . . . . . . AdditionalInformation.....................26 LastConditionMemory...................26 ScreenSaver...........................26 SystemSelect..........................26 ControllingtheTV.......................26 OperationwithRadio......................27 Presettingtheradiostations................27 Listeningtotheradio.....................27 OtherFunctions...........................28 SleepTimerSetting......................28 Dimmer...............................28 Mute.................................28 UsingtheHeadphoneJack................28 SelectingtheInputSource.................28 XTS(ExcellentTrueSound)................28 XTSpro...............................28 Reference LanguageCodeList.......................29 CountryCodeList.........................29 Troubleshooting........................30-31 Specifications............................32 Introducin Before Use Playable Discs ote on DTS-encoded CDs When DVD (8cm/12cmdisc) playing back such discs, adjust the gradually, and keep the volume level low. To enjoy DTS Digital Surround playback, an external 5.1 channel DTS Digital Surround decoder system must be connected to the digital output of the unit. volume (8cm/12cmdisc) TM Video CD TM (VCD) (8cm/12cmdisc) Audio CD Disc-related terms (8cm/12cmdisc) addition, this unit SVCD and CD-R or MP3, WMA, JPEG DVD-RW, DVD+RW, CD-RW that contains audio titles, can or play excessive audio level volume before DVD audio discs In playing DTS-encoded CDs, may be heard from the analog stereo output. To avoid possible damage to the audio system, turn down the a DivX files. Title (DVD only) The main film content accompanying or feature content additional feature content, or music album. Each title is assigned a title reference number or you to locate it enabling easily. otes Depending the conditions of the recording equip(or DVD-RW, DVD+RW) disc itself, some CD-R/RW (or DVD-RW, DVD+RW) discs cannot be played on the unit. Do not attach any seal or label to either side (the labeled side or the recorded side) of a disc. Do not use irregularly shaped CDs (e.g., heart-shaped or octagonal). It may result in malfunctions. on ment or the CD-R/RW Chapter (DVD only) Sections of a picture or a musical piece that are smaller than titles. A title is composed of one or several chapters. Each chapter is assigned a chapter number, enabling you to locate the chapter you want. Depending on the disc, chapters may not be recorded. Group (DVD audio discs The main audio content or only) accompanying feature con- tent or additional feature content, or music album. Each otes on DVDs and Video CDs Some playback operations of DVDs and Video CDs may be intentionally fixed by software manufacturers. As this unit plays DVDs and Video CDs according to disc content designed by the software manufacturer, some playback features of the unit may not be available or other functions may be added. sure to also refer to the instructions Make supplied with the DVDs and Video CDs. Some DVDs made for business purposes may not be able to be played on the group is assigned a group reference number you to locate it easily. Scene On enabling (VCD) Video CD with PBC (Playback control) functions, pictures are divided into sections called "Scenes". Each scene is displayed in the menu screen and assigned a scene number, enabling a moving pictures and still you to locate the scene you want. A scene is composed of one or several tracks. unit. of Video CDs Types Regional code of the DVD/CD receiver and DVDs This DVD/CD Receiver is designed and manufactured for playback of region "2" encoded DVD software. 2 region code on the labels of some DVDs indicates which type of player can play those discs. This unit can only play DVDs labeled "2" or "ALL". If you try to play any other discs, the message "Check Regional Code" will appear on the TV screen. Some DVDs that have no region code label may still be subject to area restrictions and therefore not playable. The There are two types of Video CDs: Video CDs PBC equipped with PBC (Version 2.0) (Playback control) functions allow you to interact with the functions, or other still pictures Moreover, typical computer-like operations. of high system via resolution menus, search can be played if they are included in the disc. Video CDs not equipped with PBC (Version 1.1) Operated in the same way as audio CDs, these discs allow playback of video pictures as well as sound, but they are not equipped with PBC. Before Use (Continued) Storing Precautions After the unit Handling discs playing, store the disc in its case. When Do not expose the disc to direct sunlight or sources of heat, or leave it in a parked car exposed to direct sun- The light, shipping the unit original shipping carton and packing materials may come in handy. For maximum protection, re-pack the unit as it was originally packed at the factory. setting up the unit The picture and sound of a When nearby TV, VCR, or radio may be disturbed during playback. In this case, position the unit away from the TV, VCR, or radio, or turn off the unit after removing the disc. To keep Do not volatile liquids, contact with the unit for a leave marks Cleaning such as a use a discs Fingerprints or and dust the disc on reduce sound with a clean quality. cloth. Wipe Before distort the can picture clean the disc playing, the disc from the centre out- wards. on insecticide spray, or long period plastic products in of time. They will the surface. the unit To clean the cabinet Use Cleaning the exterior surfaces clean use the unit. Do not leave rubber near as there may be a considerable temperature increase inside the car. soft, dry cloth. If the surfaces soft cloth lightly solution. Do not benzene, or are moistened with a extremely dirty, detergent mild strong solvents such as alcohol, thinner, as these might damage the surface Do not use strong solvents such as alcohol, benzene, thinner, commercially available cleaners, or anti-static spray intended for vinyl records. use About Symbols of the unit. About the To obtain a clear picture The DVD/CD Receiver is a high-tech, precision device. optical pick-up lens and disc drive parts are dirty or worn, the picture quality will be poor. Regular inspection and maintenance are recommended after every 1,000 hours of use. (This depends on the operating environment.) For details, please contact your nearest dealer. If the may appear on the TV screen during operation. This icon means the function explained in this owner's manual is not available About the disc on Discs DVD-V DVD-A Disc Handling VCD2.0 Hold the disc on will not VCD1.1 the surface. Do not stick paper that symbols specific DVD-Video disc. for instructions of the following symbol is represented by the symbol. one to the disc DVD and finalized DVD±R/RW. DVD Audio discs. Video CDs with the PBC (playback control) function. Do not touch the get playback side of the disc. by the edges so that fingerprints on A section whose title has applicable only Notes symbol display "" Video CDs without the PBC (playback control) function. or tape on the disc. CD Audio CDs. MP3 MP3 disc. WMA WMA disc. JPEG JPEG disc. DivX DivX disc. 5 Introducin Front Panel and Rear Panel Connect to a (USB USB port of multimedia memory PHONES connector STANDBY/ON USB host STANDBY indicator Lights red when the receiver is in Standby mode (off). etc.) FUNCTION/PLAY DISC Press and hold down this button about 3 Tray seconds, then press repeatedly to select other function. VOLUME controller DISPLAY Window OPEN/CLOSE button Remote sensor MONO/STEREO/ PAUSE/STEP TUNING(-/+)/SKIP(-/+) STOP buttons Power Cord SPEAKER connectors FM Antenna connector AV2 AUDIO Connectors AM Loop Antenna connectors S-VIDEO OUT connector MONITOR OUT connector COMPONENT VIDEO OUT terminals Connect to AV1 AUDIO a TV with Y Pb Pr Input (L/R)/VIDEO Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. 6 inputs. IN Connectors Input (L/R)/VIDEO IN Remote Control Overview POWER OPEN/CLOSE Opens DVD Select the output source (CD/DVD) AUX or Selects input DVD To control the TV. BAND System's tuner SLEEP (FM and AM bands) directly 0-9 numerical buttons service, programme number a or select numbered options in enjoy at a Mute the Selects AUDIO SOUND MRAKER - SEARCH PRESET/ Marks CH audio language (DVD) or an audio channel (CD). Accesses On-Screen Selects the TV's . DVD disc. menu on a SCAN-/+(bb/BB) Search backward or REVERSE Acknowledges the forward. Select programme of TV Displays the disc's Title SKIP(>) Program VOLUME To a radio station's (+/-) adjust speaker volume and PAUSE/STEP menu. frequency into playback STOP (x) ZOOM CLEAR on the Enlarges the program menu or a mark MARKER SEARCH on the DIMMER menu. Repeat chapter, track, title, all. REPEAT A-B To enjoy the multimedia files. Remote control Operation Range Point the remote control at the remote sensor and press the buttons. Distance: About 23 ft (7 m) from the front of the remote sensor 30° in each direction in front of the remote image. USB Repeats sequence. Angle: About DVD video Press to change brightness of the display window on the front panel dur-ing in power-on status. REPEAT Remote Control (X) Pause track number a TV volume. Stops playback. the tuner. Removes menu, if available. PLAY (B) Starts playback. MEMO. Enter Radio. TITLE PROG. or removes or To tune in the desired radio station. SKIP Search forward*/go to next chapter or track. Accesses selection. TUN(-/+) (b/B): Search backward*/go to beginning of current chapter or track or go to previous chapter or track. FORWARD menu PRESET/CH(+/-) (v/V): playback. SKIP(.) source. ENTER SCAN SLOW-/+(t/T) Reverse/ Forward slow display. b/B/v/V (left/right/up/down) Selects an option in the menu. - menu menu. INPUT MENU Accesses the MARKER SEARCH DISPLAY SETUP setup point during playback. a Displays + .. SOUND MODE or removes menu. SEARCH Selects the sound mode. Accesses language (DVD). Removes the setup AUDIO an subtitle a MARKER enjoy great sound effect. Selects speakers. RETURN XTS To System to turn off automatically. specified time. SUBTITLE natural and realistic sound. only) SLEEP SUBTITLE XTS pro more TV MUTE a menu. To (LG Set the MUTE Select source. TV accesses Select the ( Z) and closes the disc tray. sensor Remove the remote battery battery cover on control, and insert AAA) batteries correctly. with installation the rear two R03 and of the (size aligned Caution Do not mix old and new batteries. Never mix different types of batteries (standard, alkaline, etc.). 7 Introducin Connections TV Connections Make the of the one capabilities following connections, depending existing equipment. on of your Progressive Scan (ColorStream pro) connection If your television is ips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one high-definition a or "digital ready" television, you may take advantage of the DVD/CD Receiver's progressive scan output for the highest video resolution of the connection possible. If your TV does not accept the Progressive Scan format, the picture will appear scrambled if you try methods described below. Please refer to the manuals of your TV, VCR, Stereo or other devices as necessary to make the Progressive Scan the DVD/CD Receiver. on System best connections. Connect the COMPONENT VIDEO OUT Caution Make jacks from the corresponding in jacks on the Pb Pr cable (C). DVD/CD Receiver to the sure the DVD/CD Receiver is connected TV directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy using an Y Rear of TV VIDEO INPUT S-VIDEO protection system. optional INPUT COMPONENT VIDEO / PROGRESSIVE SCAN INPUT Y Pb Pr L S-Video connection Connect the S-VIDEO OUT Receiver to the S-VIDEO IN S-Video cable jack on the DVD/CD jack on the TV using the (S). Video connection S Connect the MONITOR OUT from the DVD/CD Receiver to the VIDEO IN the TV video cable jack jack on using V C the supplied (V). Component (Color Stream ) Video connection Connect the COMPONENT VIDEO OUT DVD/CD Receiver to TV using an Y Pb Pr jacks from the the corresponding in jacks on the cable (C). L AUDIO R AV2 IN AV1 IN Rear of DVD/CD Receiver otes Set the Progressive to "On" on the Setup progressive signal, see page 15. menu for Set the progressive to "Off" by removing any disc from the unit and close the disc tray. see that "no disc" is displayed on the display window. Then, press STOP and hold it for five seconds before Progressive scan video connections does not work with the analog (yellow VIDEO OUT jack) or S-VIDEO connection. 8 releasing it. Connections (Continued) Optional Equipment Connections 1 2 3 Connect a VCR to the AV IN connectors. Connect a additional VCR to the AV2 connectors. Connect the USB port of a USB Memory (or MP3 player, etc.) Prepa tion to the USB HOST on the front of the unit. VCR OUT IN Additional VCR Front of DVD/CD Receiver IN OUT To AUDIO OUT VIDEO (L/R)/ VIDEO OUT AUDIO (L) AUDIO (R) To AUDIO OUT (L/R)/ VIDEO OUT USB Memory, MP3 Player (or Memory Card Reader, etc.) To AUDIO IN VIDEO IN To AUDIO IN VIDEO IN (L/R)/ (AV1) (L/R)/ (AV2) L AUDIO R 88 AV2 IN 888 AV1 IN otes digital output does not match the capabilities of your DVD/CD Receiver, the receiver will strong, distorted sound or no sound at all. If the audio format of the produce a The DivX files in your memory card will not be able to be play. Aerial Connections Connect the supplied FM/AM aerial for listening to the radio. Loop aerial to the AM aerial connector. Connect the AM Connect the FM Wire aerial to the FM aerial connector. AM FM Wire aerial Loop aerial (supplied) (supplied) L AUDIO R 88 AV2 IN 888 AV1 IN otes To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure to fully extend the FM wire aerial. After connecting the FM Wire aerial, keep it as horizontal as possible. 9 Connections and Assembling the (Continued) Connecting to Connect the Speakers The front and rear speakers assemble the front and stands as nals on After are detached from the rear speaker speakers cords and the supplied speaker from To obtain the best possible surround sound, adjust speaker parameters (volume, distance, etc.). Front speaker (Left) Front speaker the speaker illustrated. Connect the speakers using cords. stands. Connect the speaker Speaker System Connection cords to the speaker (Right) termi- appropriate rear speaker. speaker cords to the appropriate the bottom of each front and connecting terminals on the the bottom of each front and speaker and attach the the speaker stands. front and rear rear speakers to Rear speaker (Right surround) Rear speaker (Left surround) Center 8 8 speaker 8 8 8 Subwoofer ote You cannot detach the bling the front and To hang rear speaker from the stand after speakers. the centre speaker assem- on a wall You 1 2 can hang the Centre Detach the stand Speaker on a by rotating the Speaker. wall. screw on the bottom of the Centre Attach the stand rear by rotating Speaker. the screw on the of the Centre otes Be sure are 3 10 Hang it via hole on the Speaker on the screw. rear side of the Centre to match the speaker cable to the appropriate If the cables the components: + to + and to reversed, the sound will be distorted and will lack base. terminal on -- --. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Do not remove the front cover of supplied speaker. Connections (Continued) Speaker Positioning In the case of normal position use the 6 speakers (2 front speakers, centre speaker, 2 rear speakers and subplay the excellent bass sound, DTS digital surround or Dolby Digital surround, you should If you want to connect a subwoofer. woofer). Front speakers According to your listening position speakers to 45 degree. Centre set up the speaker speakers and front speakers The centre are speakers for equal distance. And by hearing position ideally the same height. But normally place it above or set up the interval between below the television. Rear speakers Place left and right behind the listening area. These speakers recreate sound motion and atmosphere required for surround sound playback. For best results, do not install the rear speakers too far behind the listening position and install them at or above the level of the listener 's ears. It is also effective to direct the rear speakers towards a wall or ceiling to further disperse the sound. In the rear case of a smaller speakers above 60 room size, if the audience is 90 than the listener 's - cm near to the rear wall set the rear speakers opposite each other, and set the ears. Subwoofer This can be placed in any front position. Subwoofer Centre Front Rear Speaker Speaker (Left) Front Speaker (Right) Speaker (Left) Rear Speaker (Right) Speaker Positioning Example 11 Prepa tion Before Mini Operation for Audio Stream & Glossary Surround mode Sound Mode You DVD VCD2.0 VCD1.1 CD enjoy surround sound simply by selecting one pre-programmed sound fields according to the can of the program you want to listen to. Allows you to enjoy 5.1(or 6) discrete channels of high audio from DTS program sources such as discs, DVD and compact discs, etc.bearing the trademark. DTS Digital Surround delivers up to 6 channels of quality digital means identical to the original exceptional clarity throughout a transparent audio(which masters) and results in degree sound field. The term DTS is a trademark of DTS Technology, LLC. Manufactured under license from DTS Technology, LLC. true 360 When DVD is inserted You can change the Digital Audio Output mode by pressing the AUDIO button on the remote control during playback. Although the DVD contents differ from disc to disc, the following explains the basic operation when this feature is used. After you select 2 channel a) 3 ENG D 2CH button ) by pressing AUDIO button, repeatedly. Bypass Dolby Digital surround format lets you enjoy up to digital surround sound from a Dolby Digital program source. If you play DVDs with mark, you can enjoy even better sound quality, greater spatial accuracy, and improved dynamic range. (For example 2 ENG D 2CH press SOUND Music Movie or Matrix The 5.1 channels of " " After you select 5.1 channel b) (For example 1 ENG D 5.1 CH or 4 ENG ) by pressing AUDIO button, DTS 5.1 CH -" - " press SOUND button. indicator will be displayed on the TV screen. "BYPASS" indicator will be only displayed on the display window. (II) Dolby Pro Logic II creates five full-bandwidth channels from two-channel an advanced, high-purity sources. output This is done using matrix surround decoder that extracts the without spatial properties of the original recording adding any new sounds or tonal colorations. MOVIE mode: The Movie mode is for use the quality of discrete 5.1-channel sound. MUSIC mode: The Music mode is for use with any stereo music → HALL STUDIO CLUB PL ll MOVIE CHURCH PL ll MTRX BYPASS... → → → → → → → → ote After you select the "Bypass" of sound mode by pressing SOUND button, press AUDIO button. The Left, Right and Stereo of audio channel will be displayed on the TV screen. Each time you press SOUND button, the sound mode of Audio CD is changed on the display window in the following order. MATRIX mode: The Matrix mode is the same as the Music mode except that the directional enhancement logic is turned off. It may be used to enhance mono signals by making them seem "larger." The Matrix mode may use BYPASS THEATER 1 PL ll MUSIC When CD is inserted recordings. also find Each time you press SOUND button, the sound mode of Video CD is changed on the display window in the following order. with stereo television shows and all programs encoded in Dolby Surround. The result is enhanced soundfield directionality that approaches When Video CD is inserted in auto systems, where the fluctuations from poor FM stereo reception can otherwise cause disturbing surround signals from a logic decoder. The ultimate "cure" for poor FM stereo simply to force the audio to mono. reception may be BYPASS → THEATER 1 PL ll MUSIC HALL STUDIO CLUB PL ll MOVIE CHURCH PL ll MTRX BYPASS... → → → → → → → → For your reference You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo. Dolby Surround encoded programs are labeled with the logo. DTS Digital Surround discs are marked with DTS. - - BYPASS - Software with multichannel surround audio played according signals to the way it was recorded. is ote When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling frequency). 12 Before Operation (Continued) On-Screen You use the Some items screen. To general playback status on the TV can be changed using the menu. on-screen display: display can Display the Example: On-Screen Display during playing DVD Video Selection Method Items Title Number 1/3 b / B, Numbers ENTER Press DISPLAY 1 during playback. Chapter 2 Press v / V to select The selected item is an Number 1/12 b / Time search highlighted. 3 change the the number buttons if use inputting the title setting. You can appropriate (e.g. number). For press ENTER to execute the some also 0:20:09 Numbers, ENTER A-B Repeat title Repeat sequence Resume Action play language Digital Audio Output mode b/Bor and AUDIO functions, Subtitle language setting. A BC prohibited or point If no button is screen all of the features pressed for 10 seconds, display disappears. b/B Bypass Selection Method Items provide b/B Example: On-Screen Display during playing VCD not available otes Some discs may not shown below. b/Bor SUBTITLE 1/3 Sound from this 1 ENG Angle PLAYBACK STATUS/RESTRICTIONS Title Prepa tion ENTER item. Audio Press b / B to B, Numbers the on- Track Number (or PBC mode) 1/3 b / B, Numbers ENTER Time search Numbers ENTER 0:20:09 b/Bor Audio Channel AUDIO Sound Bypass b/B Example: On-Screen Display during playing DVD Audio Selection Method Items Group b / Number ENTER b / Track Number B, Numbers ENTER Time search 0:20:09 Audio language Digital Audio Output mode Display only b/Bor AUDIO and Subtitle language B, Numbers OFF ABC Display only b/B Page (or Angle) or 1/3 13 Before Initial Operation (Continued) LANGUAGE Settings the Setup menu, you can make various adjustments to items such as picture and sound. You can also By using LANGUAGE language for the subtitles and the Setup menu, among other things. For details on each Setup menu set a item, To see Press SET UP to display the menu. 3 Select v / V to a for the language appears. select the desired option then Original: Refers to the selected item, buttons to enter the / V to as v / V well as alternate setting(s). select the second desired then press B to Use move to option the third level. to select the desired setting require Press SET UP or was on-screen DVD-V display. DVD-A audio track original language (disc in which the recorded. Other: To select another language, press number according to the enter the wrong remote control. corresponding 4-digit number language code list on page 29. If you language code, press CLEAR on the then press DISPLAY ENTER to confirm your selection. Some items and language you prefer for the audio), subtitles, and the disc menu. press B to move to the second level. The screen will be shown the current setting for the v menu Disc Audio / Subtitle / Menu disc Use Setup Select the menu Select OSD Operation The setup 5 Original Move Press SET UP. 4 Off Disc Menu A second press of the remote control. on General 2 Disc Subtitle screen. To go back to the previous level: Press b on the remote control. Use Original and exit the Menu: SET UP will take you back to initial To go to the next level: 1 English Disc Audio pages 14 to 17. display Press B OSD additional steps. PLAY to exit the DISPLAY setup menu. TV 16:9 Aspect Display Mode Progressive Widescreen Off Scan Move TV Aspect DVD-V 4:3: Select when a 16:9: Select when Display Display Mode Mode Select DVD-A standard 4:3 TV is connected. a 16:9 wide TV is connected. DVD-V setting DVD-A works only when the TV Aspect mode is set to "4:3". Letterbox: Displays a wide picture with portions of the screen. bands on the upper and lower Panscan: the entire 14 Automatically displays the wide picture and cuts off the portions that do not fit. screen on Before Operation (Continued) Progressive Scan AUDIO Progressive Scan Video provides pictures with less flickering. the highest quality Each DVD disc has If you are using the COMPONENT VIDEO OUT jacks, but are connecting the receiver to a standard (analog) television, set Progressive Scan 1 Select menu scan set signal, then press B of audio output on 5.1 a to On. Prepa tion Select Speaker Setup DRC On Vocal On the DISPLAY . Move Select Off Aspect Display to use. DISPLAY TV options. options according AUDIO Progressive Scan "Progressive Scan" variety the type of audio system you to Off. If you are using the Component Video jacks for connection to a TV or monitor that is compatible with progressive a Set the DVD/CD Receiver's AUDIO On Mode Progressive 5.1 Scan Speaker Setup DVD-V DVD-A Select speaker settings, including volume balance and or test the speaker settings. Speaker settings are only active on the Analog MultiChannel Output. (See "Speaker Setting" page 25) distance, Move 2 3 4 5 Select "On" using the v / V Select buttons. Dynamic Range Control (DRC) DVD-V DVD-A DivX Press ENTER to confirm your selection. menu will appear. With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation When the confirm you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds The confirm appears on your screen Cancel is highlighted as default. Use the b / B buttons to highlight Enter. menu ENTER will set the DVD/CD Receiver Pressing Progressive to scan possible, and the thanks to digital audio technology. However, quietest ones). Then, you may listen to a movie losing dialog intelligibility. at a lower volume without Set DRC to On for this effect. mode. otes The DRC function works Caution Once the setting for progressive scan output is entered, image will only be visible on a progressive scan compatible TV or monitor. If you set Progressive Scan an The level of depending only during playback of recorded discs. Dolby Digital Dynamic Range Compression on may differ the DVD disc. to On in error, you must reset the unit. Vocal 1) Remove any disc from the unit and close the disc tray. See that "NO DISC" is displayed on the display window 2) Press and hold STOP ( x ) for five seconds then release it. The video output will be restored to the standard setting, and a picture will once again be visible on a conventional analog TV or DVD-V Set Vocal to On only DVD is The karaoke channels mix into playing. a when a multi-channel Karaoke on the disc will normal stereo sound. monitor. 15 Before LOCK Operation (Continued) Password (Parental Control) You LOCK Rating Unlock Password **** 1 2 Code Country can 4 Move that may not be suitable of these discs contain parental scenes Many applies certain scenes on to the complete the disc. Movies and Press SET UP to exit the disc or rated scenes are 1 to The Input 2 Enter your children from being able to view material you believe is unsuitable. setup "Rating" on the LOCK menu then, press the 6-digit number security code is a new code "210499" on clear it using the setup menu cleared. described above. as " " appears on the TV screen, and then press SET UP to move to the INPUT PASSWD press STOP (x) menu. Country Code DVD-V Enter the code of the the access Password and Rating, Code features, you must input the security code you created. If you have not yet entered prompted to do so. a Country 4-digit security code you are Input a 4-digit code and press ENTER. Enter it again and press ENTER to verify. If you make a mistake before pressing ENTER, press CLEAR. Selectaratingfrom1to8usingthev/V 3 can . To 2 Code ote When B menu. forget your Security and the parental control feature allows you to block access to scenes below the rating you input, thereby preventing Select then press ENTER. If you forget your security code you the following steps: from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative. 1 it Select DVD-V control information that highlighted. new 4-digit code, again to verify. Enter the If you for children to view. change password. Select Password on the LOCK menu then press B. Follow step 2 as shown left (Rating). "Change" or Input Some movies contain enter or "New" is 3 Rating (Security Code) buttons. Rating 1-8: Rating rating eight (8) and (1) one 1 2 3 has the most restrictions is the least restrictive. country/area whose standards used to rate the DVD-Video disc, based in the reference chapter. were Select "Country Code" on on the list the LOCK menu, then press B. Follow step 2 as shown left Select the first character Shift the cursor (Rating). using v / V buttons. using B button and select using v / V buttons. 4 second character 5 selection. the Unlock If you select unlock, parental control is not active and the disc plays in full. ote If you set a rating for the DVD/CD Receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are is available same rating on not played or a lower one. found, playback stops. You word 4 or unless an alternate scene the disc. The alternative must have the change the rating If no suitable alternative is must enter the level in order to 4-digit passplay the disc. Press ENTER to confirm your rating selection, then press SET UP to exit the menu. 16 Press ENTER to confirm your country code Before DVD Operation (Continued) OTHERS or Playing Video CD a Operation DVD and Video CD OTHERS Playback Setup PBC On DivX(R) Registration Select Turn on DVD VCD2.0 the TV and select the video VCD1.1 input source con- nected to the DVD/CD Receiver. Audio system: Turn on the audio system and select the input source connected to the Operation DVD/CD Receiver. Select Move PBC Set Press OPEN/CLOSE 1 VCD Playback Control (PBC) On: Video CDs with PBC to On or Off. played according are to the played the same up. double-sided DVD is inserted, make the side you want to play is facing down. way as READING appears starts DivX(R) Registration You can DivX show the DivX DRM Your Please the this code to DivX(R) (Digital Right code is registration use : using the To learn only. If XXXXXXXX The Video On Demand service. DivX(R) more purchase to close the tray. the TV screen, and playback If playback does not start, might menu appear instead. register this player with This will allow you to rent and automatically. ( Z) sure on press PLAY. In some cases, the disc code for your unit Management) Registration a Press OPEN/CLOSE 3 Audio CDs. tray. facing When are to open the disc Load your chosen disc in the tray, with the label 2 PBC. Off: Video CDs with PBC ( Z) a menu screen is displayed may be displayed first after Video CD which contains a menu. menu screen DVD or loading a videos Video On Demand format. DVD-V go to www.divx.com/vod Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rental Use the b/B/v/V buttons to select the title/chapter you view, then press ENTER to start. Press TITLE The want to an encrypt movie file. or DVD MENU to return to the menu screen. DVD-A Use the b/B/v/V buttons to select otes If you rent the DivX VOD file, it has several limits as show below. options viewing of an option you want, then press ENTER to view the option. VCD2.0 Use the number buttons to select the track you want Display the number which you can watch the file. to view. Press RETURN to return to the Menu ? This rental video has 7 views left. A view ends when you video, or stop playback, play player. a different turn off your Do you want to use one of your 7 views Yes now setting menu screen. and the exact operating procedures for depending on the disc. the menu may differ Follow the instructions on the each using menu screen. You also may set PBC to Off under setup. No otes The rental has been expired. This rental is Display the authorization This video player is If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized expired. error. not authorized to "Parental Control", (see page 16). region code. on DVDs may have a Your receiver will not play discs that have code different from your receiver. The this player is 2 (two). region region code a for play this video. 17 DVD Video CD or Operation (Continued) Still Picture and General Features ote Unless stated otherwise, all operations described the remote control. Some features may also be available on the Setup use 1 Press PAUSE/STEP during playback. The DVD/CD Receiver will now go into PAUSE mode. menu. 2 Moving Frame-by-frame playback to another TITLE/GROUP You can advance the picture frame-by-frame by pressing PAUSE/STEP repeatedly on the remote control. Search When move a disc has more to another than title/group one as title/group, you can 1 follows: DISP., then press the appropriate numbered button (0-9) to select a title number. Press m or M during playback. The DVD/CD Receiver will now go into SEARCH mode. Press Moving When a disc has title on a more disc has than as Press . or one more than track, you one chapter can move or a to another follows: > briefly during playback to select the next chapter/track or to return to the beginning of the current chapter/track. Press . twice briefly to step back to the previous chapter/track. To go directly to any chapter during DVD playback, press DISP. Then, press 3/4 to select the chapter/track icon. Then, enter the chapter/track number using the numbered buttons (0-9). For two-digit numbers, press (0-9) in rapid succession. 3 Press SLOW -/+ required speed: mX2, mX4, mX8, mX16, (backward) or MX2, MX4, MX8, MX16, MX100 (forward). With a Video CD, the Search speed changes: mX2, mX4, mX8, mX16 (backward) or MX2, MX4, MX8, MX16 (forward). To exit SEARCH mode, press PLAY. 1 To repeat the REPEAT. The or t 1/2 or T 1/2 required speed: t (backward), or T (forward). To exit slow motion mode, press PLAY. on the TV screen. playing, press The the TV Repeat Title icon appears To exit on screen. REPEAT Repeat mode, press a third time. 1 Repeat Off icon appears The 2 ote reverse is not applicable for 3 the TV on screen. Repeat Track/All/Off currently playing, press Repeat Track icon appears on To repeat the disc currently REPEAT a second time. Repeat To exit All icon appears on the TV playing, press the TV Repeat mode, press screen. screen. REPEAT a third time. The Video CD. - To repeat the track REPEAT. The playback currently playing chapter, press Repeat Chapter icon appears Video CDs Use the SLOW -/+ to select the in Repeat Chapter/Title/Off pause. The receiver will enter SLOW mode. Slow motion - To repeat the title currently REPEAT a second time. The 1/16, t 1/8, t 1/4 1/16, T 1/8, T 1/4 to select the repeatedly Repeat 3 during or M DVD-Video discs the numbered buttons Slow Motion 2 3 2 ote Press m mX100 to another CHAPTER/TRACK chapter/track 1 2 Repeat Off icon appears on the TV screen. ote On a Video CD with the setup 17. menu PBC, you must set PBC to Off on Repeat function. See page to use the DVD or Video CD General Features Repeat To repeat A-B a (continued) DVD-A a 1 2 A-B appears Press A-B sequence VCD1.1 DVD-V You from can on the TV start points To enter title: Press A-B at your chosen briefly VCD2.0 Marker Search nine sequence in A- appears 3 DVD-V Operation (Continued) a playback on a To cancel the sequence, press A-B. During Press DISP. during playback. play appears on the screen. The Time Search box shows the The playing at 2 Search on-screen dis- on-screen 3 enter the seconds, display. required use minutes, and seconds from left to During in the If you enter the wrong numbers, press CLEAR to the numbers you entered. Then enter the correct bers. Within 10 seconds, press ENTER screen. to select a marker scene. a Marked Scene playback, press SEARCH. disc menu will appear on the screen. Press 1/ 2 to select the marker number that you want to erase. remove Press CLEAR. num- The marker number will be erased from the list. to confirm the 2 and 3 to erase additional marker Repeat steps start time. Playback the the MARKER SEARCH menu, press The MARKER SEARCH box. 4 remove To clear hours, right seconds, press 1/2 on SEARCH. the number buttons to start time. Enter will appear will start from the Marked Playback to select the Time The "-:--:--" appears in the Time Search box. Within 10 menu Press ENTER. To seconds, press icon in the points number that you want to recall. elapsed playing time of 3 /4 briefly. playback, press SEARCH. disc Within 10 the current disc. Within 10 screen Marked Scene a The MARKER SEARCH 1 to disc. To Recall VCD1.1 the TV on 1 to enter up to nine Marker Repeat step The Time Search function allows you to start any chosen time on the disc. point. Up mark, follow these steps. The marker icon will appear begins. VCD2.0 memorized a be memorized. can memorize. at your chosen end point. briefly on the TV screen, and the repeat DVD-V VCD1.1 During disc playback, press MARKER when playback reaches the spot that you want to starting point. screen. again Time Search VCD2.0 numbers. starts from the selected time on the disc. If you time, playback will continue from the current enter an invalid To point. SEARCH. remove Zoom the MARKER SEARCH menu, press DVD-V DVD-A VCD2.0 DivX VCD1.1 The Zoom function allows you to enlarge the video image and to move through the enlarged image. Press ZOOM during playback or still playback activate the Zoom function. If you press ZOOM repeatedly, the magnification level increases up to four steps. 100% size → 1600% size 400% size → → 800% 100% size Use the 1234 buttons to zoomed → move through the picture. ote The zoom function may not work for some DVDs. 19 to Operation DVD Video CD or Special Operation (Continued) DVD Features DVD-V DVD-A A typical DVD Audio disc contains up to seven times the capacity of a CD. This additional space is used for data the contents of DVD Video discs: Menus Checking DVDs may contain menus that allow you to access features. To use the disc menu, press MENU. Then, press the appropriate number button to select an option. Alternatively, use the 1/2/3/4 buttons to highlight your selection, then press ENTER. special music, either Advanced Resolution multi-channel sound quality that is closer to the artist's master recording or for longer recordings. Many DVD Audio discs contain on-screen text, such as artist biographies, playlists, or lyrics. Some DVD Audio discs contain photo galleries or video clips. ote To DVD-V Title Menu If the current title has the menu can list menu may appear. angles, spoken lanoptions, and chapters for the camera guage and subtitle title. DVD-V menu is Changing groups. Your player enables you to quickly access different groups during playback via the on-screen DVD-A displayed. the Audio display. Language DVD-V DivX Press AUDIO repeatedly during playback to hear different audio language or audio track. Changing the Audio Channel a 1. Press DISP. 2. Press 3/4 to select Press 1/2 3. Group in on stop mode. icon. the numbered buttons (0-9) to select a Note: VCD2.0 VCD1.1 ote Sometimes the author of the disc creates hidden content that can only be accessed by entering a password. If the lock icon appears on the TV screen, enter the password (sometimes you'll find it on the disc's jacket appears, the feature is not available or during playback group number. Press AUDIO repeatedly during playback to hear a different audio channel (STER., LEFT or RIGHT). If to another GROUP Some DVD Audio discs divide content into different DVD-A Press MENU. The disc and surround effect of receiver). If you use the DIGITAL OUT (OPTICAL or COAXIAL) for your audio connection, the sound will only be similar to CD-quality sound even though you're playing a DVD Audio disc. Moving Disc Menu quality Audio, you must use 5.1 channel analog audio output (5.1CH AUDIO OUT jacks on the DVD/CD menu, the menu will appear on Otherwise, the disc screen. The a maximum sound DVD Press TITLE. 1 2 DVD-A enjoy on the disc. cover or on a isn't dictated by web site). This password your DVD/CD receiver --- it is control a function of the disc. Subtitles DVD-V DivX Press S-TITLE repeatedly during different subtitle languages. Since the playback to see the otes The subtitle file of the DivX file is displayed only smi, srt and sub. If there is no information or there is a code that can not read in the DivX file, "1/1" etc are displayed. DVD Audio Discs DVD Audio is building on the success of DVD to provide high quality, uncompressed, multichannel audio for a new experience in audio quality. A DVD Audio disc can be identified by the DVD audio logo on the disc jacket or on the disc itself. a new disc format DVD Audio can provide higher quality stereo than Audio CDs with a sampling rate of up to 192kHz (compared to 44.1kHz for CDs). DVD Audio digital sound can be delivered with up to 24 bits of data (compared to 16 bits for a standard CD). 20 the authoring of DVD Audio Discs varies, some of display choices might not be available for you're playing. on-screen the disc another PAGE Viewing Since DVD Audio discs are various ways to 1. Press DISP. 3 /4 can see hold a lot of content, there on the disc. what's available during playback. 2. Press to select 3. Press 1/2 to select Page a icon. page number. What appears on the screen will vary from disc to disc because the information available depends upon the way the disc was created. Note: Since the the authoring of DVD Audio Discs varies, some of display choices might not be available for you're playing. on-screen the disc Audio CD Playing Disc an CD MP3/WMA Disc or Operation Audio CD and MP3/WMA MP3 Repeat Track/All/Off You WMA can play a title/chapter/all/track 1 Press REPEAT when The DVD/CD Receiver recordings on play MP3/WMA formatted CD-ROM, CD-R, or CD-RW discs. can 2 Press REPEAT to select Audio CD List Program Track1 Track8 Track2 Track3 Track3 Track12 Track4 Track7 Track5 Track6 Track6 Track9 Track7 Track1 Track8 Track10 a on a WMA disc. disc. The repeat icon a desired repeat mode. TRACK: repeats the current track ALL: repeats all the tracks on a disc. Once you insert an audio CD a menu appears on the TV screen. Press v / V to select a track then press PLAY or ENTER and playback starts. 1/12 playing MP3 appears. Audio CD 0:00:00 CD does not Off(No display): Search CD 1 Press m or or Operation WMA Mduring playback. The receiver will 2 Press m MP3 play repeatedly. now M go into SEARCH mode. repeatedly to select the speed: mX2, mX4, mX8 (backward) MX4, MX8 (forward). required or MX2, 3 To exit SEARCH mode, press PLAY. MP3 / WMA 1. Press v / V to select see 2. a folder, and press ENTER to the folder contents. MP3 / WMA disc Press v / V to select a track then press PLAY ENTER. Playback starts. or limited as compatibility with this player is follows: Sampling frequency: within 32 48 within 24 48kHz (WMA) Bit rate: within 8 320kbps (MP3), 32- 192kbps (WMA) kHz The DVD/CD Receiver cannot read an - (MP3), - 0:00:00 1/104 - MP3 List Program 1-Music1 MP3/WMA 2-Music2 file that has 3-Music3 file extension other than a 4-Music4 ".mp3" / ".wma". 5-Music5 6-Music6 CD-R 7-Music7 otes If you are in a file list on the MP3/WMA menu and want to return to the Folder list, use the v / V to highlight and press ENTER. Press MENU to On move to the next page. CD with MP3/WMA file and JPEG file, you can switch MP3/WMA and JPEG menu. Press TITLE and a MP3/WMA JPEG word or use b lighted. Then, Pause CD 2 To return to > In case of audio should not contain an This DVD/CD Receiver WMA press PLAY the disc should be less requires discs and recordings achieve or are press CD step back to the WMA to the next track. previous track. CD, track, directly using the numbered buttons (0-9) to any optimal playback quality. Pre-recorded DVDs automatically set to these standards. There are many different types of recordable disc formats (including CD-R containing MP3 or WMA files) and MP3 briefly during playback to go beginning of the current to on to meet certain technical standards in order to during playback. to go / ? *:"<>letc. The total number of files briefly the track number incorporate than 999. to return to the Press . twice .mp3 or .wma extension. special letters such as must They high- playback, again. or MP3 / WMA files. We JPEG to another Track Press . playback is PAUSE/STEP Moving to recommend that you use Easy-CD Creator, which creates an ISO 9660 file system. File names should have a maximum of 8 letters and or on top of the impossible menu MP3 1 Press PAUSE/STEP or format should be ISO 9660 / B to select MP3/WMA then press ENTER. track physical If you record MP3 / WMA files using software that cannot create a file system (eg. Direct-CD) it is enter these require certain pre-existing conditions (see above) to ensure compatible playback. Customers should note that required permission is in order to download MP3 / WMA files and music from the Internet. Our company has no right to grant such permission. Permission should always be sought from the copyright owner. during playback. 21 JPEG Disc Viewing a Operation JPEG disc JPEG JPEG disc play discs with JPEG files. Before playing JPEG recordings, read the JPEG Recordings on right. This unit Insert disc and close the tray. The JPEG menu appears on the TV 1 as can notes on with this is limited player upon the size and number of JPEG a long time for the DVD/CD Depending files, it could take Receiver to read the disc's contents. If you don't display after several minutes, a see an on-screen screen. of the files may be too large reduce the resolution of the JPEG files to less than 2760 x some JPEG 2048 List compatibility follows: Preview --- pixels and burn another disc. JPEG Folder 1 The total number of files and folders JPEG Folder 2 on the disc JPEG Folder 3 should be less than 999. JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 Some discs may be incompatible due to recording format or the condition of disc. JPEG Folder 7 JPEG Folder 8 Press 2 v / select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the previous Folder list, remote to 3 V to the v / V buttons use on and press ENTER. highlight While to the viewing a file, you can press STOP previous menu (JPEG menu). to move ips There four Slide : Speed options (Normal), >>> (Fast) and II (off). Use v/V/b/B to highlight the Speed. Then, use b / B select the option you want to use then press ENTER. If you set Speed option to Off, Slide is not active. > are (Slow), >> Use vVbBto press ENTER. highlight STILL PICTURE 1. to JPEG SLIDE SHOW the (Slide Show) then JPEG Press PAUSE/STEP slide show. during The DVD/CD Receiver will now go into PAUSE mode. 2. To return to the slide show, press PLAY PAUSE/STEP again. Press SKIP (. or >) once TO ROTATE PICTURE Press b / B picture 22 during showing clockwise or while previous a press JPEG MOVING TO ANOTHER FILE to advance to the next or or viewing a picture file. JPEG picture to rotate the counter-clockwise. rename File If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. different Ensure that all the selected files have the extensions when If the files have the a them the files by are Windows into the CD ".jpg" layout. ".jpe" or ".jpeg" extensions, please ".jpg" file. as without names to be read copying ".jpg" extension will not be able this DVD/CD Receiver. Even shown Explorer. as JPEG image files in though Programmed Playback CD MP3 WMA The program function enables you to store your favorite tracks from any disc in the receiver memory. A program contain 300 tracks. 1 Insert disc. a REPEAT PROGRAMMED TRACKS 1. Audio CD and MP3/WMA Discs: Audio CD or MP3/WMA menu appears as 1/12 0:00:00 Audio CD Program playing below. Press REPEAT to select a 1/104 MP3 List Press REPEAT when a disc. The repeat icon appears. 2. 0:00:00 can desired repeat mode. JPEG TRACK: repeats the current track ALL: repeats all the tracks on programmed list. Program List Track1 Track8 Music Folder 1 Track2 Track3 Music Folder 2 Track3 Track12 Music Folder 3 Track4 Track7 Music Folder 4 Track5 Track6 Music Folder 5 Track6 Track9 Music Folder 6 Track7 Track1 Track8 Track10 Off(No display): does not play repeatedly. Music Folder 7 ERASING A TRACK FROM "PROGRAM" Music Folder 8 LIST Audio CD Menu MP3/WMA Menu 1. Use vVto select the track that you wish to Program list. erase from the 2 Select or a track " on the "List", then press PROGRAM 2. icon then press ENTER to the selected track on the "Program" list. select place Repeat to (Add)" place additional tracks on the list. You can add all tracks in the disc. Select " ( Add All)" icon then press ENTER. 3 5 the list. ERASING THE COMPLETE PROGRAM Use v / V to select " (Del all)", then press ENTER. ote Press PLAY or ENTER to start. Playback begins programmed the tracks. the order in which you Playback stops after all of the tracks "Program" list have To normal resume on LIST Select the track you want to start playing on the "Program" list. Press MENU to move to the next page. 4 Alternatively, select (Delete)" icon then press ENTER to place the selected track on the Program list. Repeat to erase additional tracks ote " Press CLEAR. back, select a played on in The programs are also cleared when the disc is removed. the once. playback from track of AUDIO CD programmed play(or MP3/WMA) list and then press PLAY. 23 Operation DivX Disc Using 1 Operation this DVD/CD Receiver you can play DivX disc. DivX disc disc and close the tray. The DivX appears on the TV screen. Insert a 0:00:00 menu as compatibility with this player is limited follows: Available resolution size of the DivX file is under 720x576 1/12 (W x H) pixel. DIVX The file List name of the DivX subtitle is available 20~40characters Movie Folder 1 Movie Folder 2 Movie Folder 3 If there is Movie Folder 4 impossible code to express in the DivX as mark on the dis" file, it may be displayed Movie Folder 5 Movie Folder 6 by (different by language). " _ play. Movie Folder 7 Movie Folder 8 If the number of the screen frame is over 30 per 1 second, this unit may not operate normally. Press v / V to select a folder, and press ENTER. A list of files in the folder appears. If you are in a file list and want to return to the Folder list, use the 2 v / V buttons on the remote to highlight ? Press STOP to exit. or audio is out- If the file is recorded with ports If you want to view a particular file, press v / V to highlight a file and press ENTER or PLAY. 4 is not interleaved, either video putted. and press ENTER. 3 If the video and audio structure of recorded file * some of 1-point GMC, the unit supof the record level. GMC? GMC is the acronym for Global Motion Compensation. It is an encoding tool specified in MPEG4 standard. Some MPEG4 encoders, like DivX or Xvid, have this option. are different levels of GMC encoding, usually called There 1-point, 2-point, or 3-point GMC. otes ? Be sure DivX file ? ? ? ? to select "SUBTITLE ON" mode before playback ENTER every time. When the subtile has more than two languages in the a by pressing file, original subtile is only available. The Pro logic II Sound mode is not available for DivX file. Subtitle in Chinese will not be displayed during playback a DivX file. (Subtitle in English is available) Playable DivX file z ".avi ", ".mpg ", ".mpeg Playable Codec " format z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ", "MP43 ", "3IVX ", "MP42 ". The DivX files in your memory card will not be able to be play. Playable Audio format z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ". Sampling frequency: within 32 48 kHz - within 24 Bit 40 24 48kHz (WMA) rate: within 32 320kbps (MP3), 192kbps (WMA) - - - (MP3), Speaker Setup Adjust the for the built-in 5.1 channel following settings surround decoder. Distance If you connected speakers to your DVD/CD Receiver, the distance lets the speakers know how far the setting 1 2 3 4 sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the Press SET UP. The setup Use v / menu v / listener at the select the AUDIO V to B to move to Use appears. then press then press B to is highlighted. same Press b / B to time. adjust the Distance of the selected speaker. the second level. select the V to option Speaker Setup option the third level. "Select" move to ote You Press ENTER and 5.1 Speaker Setup menu can adjust the distance speakers (left & right) only. of Center speaker and Rear appears. Test AUDIO Press b / B to test the Adjust Speaker Front L Size 0 dB Distance 2 m 7 speaker. signals Rear Right (R) → → Front Rear Left (L) Right (R) → → SubWoofer Off Select 6 → Volume Test 5 memorized in the system. Front Left (L) Center Small of each signals the volume to match the volume of test Move Return Use b / B to select the desired Adjust options using v / V Enter speaker. / b / B buttons. Press ENTER to confirm your selection. The unit returns to the previous menu. Speaker Select a speaker that you want to adjust. (Front speakers (Left), Front speakers (Right), Center Speaker, SubWoofer, Rear speakers (Left), or Rear speakers (Right)) ote Certain speaker settings are prohibited by Digital licensing agreement. the Dolby Size Since the speaker settings are fixed, you cannot change them. Volume Press b / B to speaker. (-5dB adjust the output +5dB) level of the selected ~ 25 Operation Additional Information Last Condition Memory Controlling This DVD/CD Receiver memorizes the user for settings the last disc that you have viewed. Settings remain in memory even if you remove the disc from the player or player. If you load memorized, the latest stop switch off the a tings ly recalled. position the TV Your remote control is DVD/CD Receiver as of operating your limited functions of LG TV. capable well as Follow the instructions below to operate for your LG TV. disc that has its setis automatical- 1 Before using the remote control, press the TV to select the device to be operated. To switch the remote control mode different device), be (to operate a to press the TV first. sure otes Settings are stored in memory for use any time. This DVD/CD Receiver does not memorize settings of disc if you switch off the DVD/CD Receiver before commencing to play it. 2 The POWER, CH( E / D ), VOLUME (+/-), and INPUT on remote control are used to operate the buttons LG TV. a Remote Control Codes for LG TV Hold POWER and press PR/CH(+/-) repeatedly until the TV on or off. Screen Saver The Setting appears when you leave the DVD mode for about five minutes. (E/D) button screen saver player in Stop ote If the remote control does not System TV, try the other code Select You must select the appropriate system mode for your TV system. If NO DISC appears in the display window, press and hold P/STEP on the front panel or remote control for more than 5 seconds to be able to select system (PAL, NTSC or a AUTO). When the selected system does not coincide with the system of your TV, normal colour picture may not be displayed. AUTO: Select when DVD/CD Receiver is connected with Multi NTSC: system TV. Select when DVD/CD Receiver is connected with NTSC-TV. PAL: Select when DVD/CD Receiver is connected with PAL-TV. originally supplied Due to the variety or use operate your particular the remote control with the LG TV. of codes used (LG and Gold Star) by manufacturers, OUR COMPANY cannot guarantee that the remote control will operate every model of LG TV. Operation Presetting You can tuning, with Radio the radio stations preset 50 stations for FM and AM (MW). Before make sure Preset radio stations in the DVD/CD Receiver's memory (see "Presetting radio stations" on the left). that you have turned down the vol- first the remote control until FM 1 ume. Press BAND on or 1 AM 2 And then every time you press BAND, FM and AM (MW) changes alternately. in the (MW) appears display Press and hold TUNING 3 then release. when the DVD/CD Receiver tunes in appear in the stereo (MW) display window. PR(D/E) repeatedly to select the 3 front a program) Press 2 Press PROG./MEMO. A on Adjust the volume by rotating VOLUME on the panel or by pressing VOLUME + or on the remote control repeatedly. - To turn off the radio Press POWER to turn the DVD/CD Receiver off the remote control. preset number will flash in the display window. 5 6 ( D/ E ) the remote control to select on the preset number you want. Press PROG./MEMO. on AV 1, or etc.,). or automatic tuning, tuning press TUN(-) repeatedly. in step b or 2. TUN (+) B on For automatic the remote control TUN again. Repeat steps For manual the remote control (+) tuning, press and hold TUN(-) b or B for about two seconds on the remote control. The station is stored. 7 (DVD/CD, To listen to non-preset radio stations Use manual Press PR the remote control on preset station you want. Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. select another function mode 4 FM appears in the or window. The last received station is tuned in. until the panel for about two seconds frequency indication starts to change, (for display on the front Scanning stops Press BAND until AM window. or station. "TUNED" and "STEREO" to the radio Listening 3 to 6 to store other stations. To select You preset radio station directly a can use the number buttons on the remote control to select a To tune in a station with Press TUNING a weak to tune in the station signal repeatedly or in step 3 then 9 manually. To clear all the stored stations Press and hold PROG./MEMO. for about two seconds and "CLEAR ALL" is appeared in the and then press PROG./MEMO. cleared. window display again, the stations are If you have accidentally entered into the "CLEAR ALL" and you do not wish to clear the memory, do not press any key. After a few seconds, the "CLEAR ALL" display will go off by itself and change to mode. ote If all stations have already been entered, the FULL message will appear in the display window for moment and then a preset number will flash. To change above. preset radio station directly. For example, to listen to preset station 4, press 4 on the remote control. To listen to preset station 19, press 1 a the preset number, follow the steps 5-6 as (within 3 seconds). For your reference If an FM program is Press MONO/ST. noisy panel so that display window. There will be no stereo effect, but the reception will improve. Press the button again to restore the stereo "STEREO" on the front disappears in the effect. To improve reception supplied antennas. Reorient the Operation Other Functions Sleep Timer You set the DVD/CD Receiver to turn off automati- can at a cally Setting specified time. XTS (Excellent You enjoy the vivid stereophonic sound of the original source without any signal distortion. digital Press SLEEP to set the desired The SLEEP indicator and time. sleep sleep time appears in the dis- play window. Each time you press SLEEP the in the following order. setting changes SLEEP 180 →150 →120→90→80→70 →60→50→ 40→30→20→10 →OFF Tips: XTS- 1: XTS- 2: the Headphone Connect a stereo headphone PHONES connector. plug IN Jack plug ( 3.5mm) into the speakers are automatically disconnected in a headphone (not supplied). Selecting You can use or the VCRs when you Input Source high display front You effect via the rear by playing the sound speakers same as the speakers. can operate both XTS- 1 and XTS- 2 simultaneously and it can complement the relative degrading of the sound pitch of the woofer at the XTS- 2 mode. or supplied with operation. Press AUX other units connected to the AV 1 the unit for further information repeatedly on the remote input source. on the control to select the desired Each time you press this button, the mode of the changes in the following sequence: function AV 1: for selecting the analog signal from (L/R) & VIDEO IN Connectors. AV1 AUDIO IN AV 2: for AV2 AUDIO IN selecting the analog signal from (L/R) & VIDEO IN Connectors. ote can also select the FUNC. button on input source by pressing panel. the front The XTS- 2 mode is temporarily disabled when changing changing it from 2.1 CH to 5.1 CH and it is enabled when to 2.1 CH. XTS pro The unique sound quality of the LG Technology creates the optimum sound for you to play the perfect playback of the original sound and to feel the living sound source. Each time you press XTS pro the the following order. XTS-P ON AV 2 connectors. Refer to the owner's manual You of sound at woofer ote Press MUTE to mute your unit. You can mute your unit in order, for example, to answer the telephone, "MUTE" indicator flashes in the display window. The sense for you to satisfy with. In the mode of 2 CH BYPASS, It creates the source repeatedly. Mute Using playing the movie with the weak bass relatively to the general music, it enforces the This function will change the brightness of the display window on the front panel during in power-on status. Press the DIMMER When sound XTS- 3: Dimmer Sound) Each time you press XTS during 2 channel mode, the setting changes in the following order. XTS-1→XTS-2→XTS-3→NORMAL... ote You can check the time remaining before the DVD/CD receiver turns off. Press SLEEP. The remaining time appears in the display window. True can → XTS-P OFF setting changes in Language Codes Use this list to input your desired language Subtitle, Disc Menu. for the following initial settings: Disc Audio, Disc Language Code Language Code Language Code Language Code Abkhazian 6566 Finnish 7073 Macedonian 7775 Slovenian 8376 Afar 6565 French 7082 7771 Somali 8379 Afrikaans 6570 Galician 7176 7783 Spanish 6983 Albanian 8381 Georgian 7565 Malagasy Malay Malayalam 7776 Sudanese 8385 Ameharic 6577 German 6869 Maltese 7784 Swahili 8387 Arabic 6582 Greek 6976 Maori 7773 Swedish 8386 Armenian 7289 Greenlandic 7576 Marathi 7782 8476 Assamese 6583 Guarani 7178 Moldavian 7779 Tagalog Tajik Azerbaijani 6590 Gujarati 7185 Mongolian 7778 Tamil 8465 Bashkir 6665 Hausa 7265 Nauru 7865 Tatar 8484 Basque Bengali; Bangla 6985 Hebrew 7387 7869 Telugu 8469 6678 Hindi 7273 7879 Thai 8472 Bhutani 6890 Hungarian 7285 7982 Tibetan 6679 Bihari 6672 Icelandic 7383 Nepali Norwegian Oriya Panjabi 8065 8473 Breton 6682 Indonesian 7378 Pashto, Pushto 8083 Tigrinya Tonga Bulgarian 6671 Interlingua 7365 Persian 7065 Turkish 8482 Burmese 7789 Irish 7165 Polish 8076 Turkmen 8475 Byelorussian 6669 Italian 7384 Portuguese 8084 Twi 8487 Cambodian 7577 Japanese 7465 Quechua 8185 Ukrainian 8575 Catalan 6765 Javanese 7487 Rhaeto-Romance 8277 Urdu 8582 Chinese 9072 Kannada 7578 Rumanian 8279 Uzbek 8590 Corsican 6779 Kashmiri 7583 Russian 8285 Vietnamese 8673 Croatian 7282 Kazakh 7575 Samoan 8377 Volapuk 8679 Czech 6783 Kirghiz 7589 Sanskrit 8365 Welsh 6789 Danish 6865 Korean 7579 Scots Gaelic 7168 Wolof 8779 Dutch 7876 Kurdish 7585 Serbian 8382 Xhosa 8872 English Esperanto 6978 Laothian 7679 Serbo-Croatian 8372 Yiddish 7473 6979 Latin 7665 Shona 8378 Yoruba 8979 Estonian 6984 Latvian, Lettish 7686 Sindhi 8368 Zulu 9085 Faroese 7079 Lingala 7678 Singhalese 8373 Fiji 7074 Lithuanian 7684 Slovak 8375 Country Choose a 8471 8479 Codes country code from this list. Country Afghanistan Argentina Code Code Country Malaysia Code ET MY Saudi Arabia SA FJ Maldives MV SN Country Code AR Country Ethiopia Fiji Australia AU Finland FI Mexico MX Austria AT France FR Monaco MC Senegal Singapore Slovak Republic Belgium BE Germany DE Mongolia MN Slovenia SI Bhutan BT Great Britain GB Morocco MA South Africa ZA Bolivia BO Greece GR Nepal NP South Korea KR Brazil BR Greenland GL Netherlands NL Spain ES Cambodia KH Islands HM Dutch Antilles AN Sri Lanka LK Canada CA HK New Zealand NZ Sweden SE HU AF SG SK Chile CL Hong Kong Hungary Switzerland CH CN India IN Nigeria Norway NG China NO Taiwan TW Colombia CO Indonesia ID Oman OM Thailand TH Congo CG Israel IL Pakistan PK Costa Rica CR Italy IT Panama PA Turkey Uganda UG Croatia HR Jamaica JM Ukraine UA CZ JP PH United States US DK Japan Kenya Paraguay Philippines PY Czech Republic Denmark KE Poland PL Uruguay UY Ecuador EC Kuwait KW Portugal PT Uzbekistan UZ Egypt EG LY Romania RO Vietnam VN El Salvador SV Libya Luxembourg LU Russian Federation RU Zimbabwe ZW TR Refrnce Troubleshooting Check the following guide for the possible cause of a before problem service. contacting Cause Symptom Correction No power. The power cord is disconnected. Plug the power cord wall outlet. The power is on, but the DVD/CD Receiver No disc is inserted. Insert a disc. (Check that the DVD or, audio CD indicator in the DVD display is The TV is not set to receive DVD Select the appropriate video input mode on the TV so the picture from the DVD/ CD Receiver appears on the TV screen. does not work. No signal output. The video cable is not connected Connect the video cable into the securely. securely. T he connected TV power is turned off. sound or only a very low-level sound is heard. The equipment connected with the audio cable is not set to receive DVD no signal output. The audio cables not connected are securely. The audio playback picture is T urn on jacks the TV. Select the correct input mode of the audio receiver so you can hear the sound from the DVD/CD Receiver. Connect the audio cable into the jacks securely. The power of the equipment connected with the audio cable is turned off. The into the lit.) picture. There is securely connecting The disc is cable is damaged. T urn on the equipment connected with the audio cable. it with Replace a new one. Clean the disc. dirty. poor. The DVD/CD Receiver does not start No disc is inserted. Insert a disc. (Check that the DVD, or audio CD indicator in the DVD display is playback. lit.) An unplayable disc is inserted. Insert a playable disc. the disc (Check type, colour system and Regional code.) The disc is placed upside The disc is not The disc is Amenu is placed Place the disc with the down. down. within the guide. the TV Place the disc on the disc tray inside the guide. side correctly Clean the disc. dirty. on playback Press the SET UP button to turn off the screen. menu screen. Loud hum heard. or noise is The Rating The plugs and The disc is Cancel the Rating function the rating level. level is set. jacks are W ipe them with a cloth tened with alcohol. dirty. change slightly mois- Clean the disc. dirty. The speakers and components connected poorly. or are The DVD/CD Receiver is located too close to the TV. Connect the speakers and components securely. Move your TV away from the audio components. Troubleshooting (Cont'd) Cause Symptom Radio stations cannot be tuned in. The antenna is Correction positioned or connected poorly. Connect the antenna securely. the antennas and connect external antenna if necessary. Adjust The signal strength of the stations is too weak (when tuning in with automatic T une in the station an manually. tuning). No stations have been preset or preset Preset the stations (page 27). stations have been cleared (when tuning by scanning preset stations). The remote control does not work properly. T he remote control is not pointed at the Point the remote control at the remote of the DVD/CD Receiver. remote sensor of the DVD/CD Receiver. sensor The remote control is too far from the DVD/CD Receiver. Use the remote control within about 23 ft (7 m). There is an obstacle in the path of the remote control and the DVD/CD Remove the obstacle. Receiver. The batteries in the remote control flat. The front panel is too dim. display Nothing display. is displayed on the front are panel Replace the batteries with Press DIMMER on new ones. the remote control. Refrnce Specifications Power Power Refer to main label supply consumption Refer to main label Mass Gen ral External dimensions (W x H x D) conditions CD/ VD Tuner [MW] x Signal system Frequency response (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Video input PAL nm 140 Hz to 20 kHz (1 kHz, NOP, 20 kHz LPF/A-Filter) More than 70 dB (1 kHz, at 12W position) (20 kHz LPF/A-Filter) (p-p), 75 Ω, negative sync., RCA jack x 1 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Y) 1.0 V (p-p), 75 Ω, negative sync., Mini DIN 4-pin x (C) 0.3 V (p-p), 75 Ω (Y) 1.0 V (p-p), 75 Ω, negative sync., RCA jack x 1 (Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 1 0.5 % 1.0 V 108.0 MHz 87.5 Stereo mode 70W+70W(8Ωat1kHz,THD10%) Front: 70W + 70W (THD 10 %) - or 65.0 74.0 - MHz, 87.5 60 dB 140 - 522 - (Mono) 1,620 kHz or 520 - 1,720 kHz 450 kHz Inputs Outputs AV1 Surround*: 70W + Subwoofer*: 150W 70W (4Ω (8Ω kHz, THD 10 %) Hz, THD 10 %) at 1 at 30 IN, AV2 IN S-VIDEO, MONITOR, PHONES: (32 Ω, Type Impedance Frequency Response 1 Way 150 Speaker - 1 Way Input Power Input Power (1m) 70W 140 W x D) 280x1200x280mm Weight 2 Speaker V) Passive Subwoofer 1 Way 2.38kg 150 - 20,000 Hz 86 dB/W 1 Speaker 4Ω 8Ω 20,000 Hz 86 dB/W Rated (W Speaker 2 1.0 Centre speaker 8Ω Sound Pressure Level H 108.0 MHz 10,000 Hz Centre*: 70W x - 1 10.7 MHz (* Depending on the sound mode settings and the source, there may be no sound output.) Max. status: Horizontal 650 wavelength Tuning Range Intermediate Frequency Signal-to Noise Ratio Frequency Response Tuning Range Intermediate Frequency Net Designs Operation 625/50, NTSC 525/60 More than 75 dB Video output Net Dimensions Suplied Acesori mm 5°C to 35°C, Semiconductor laser, Satellite Speakrs 350 5% to 85% Surround mode Amplifer 54 Laser Component AM x Temperature: S-video output FM kg 430 Operating Operating humidity Video output Video 3.9 (1m) 70W 140 W 40 - 1,500 Hz 82 dB/W (1m) 150 W 300 W 500x83x90mm 195x402x360mm 0.71kg 6.2kg Speakers..........................6 Speakercables......................6 AMloopantenna.....................1 FMantenna.........................1 Remotecontrol......................1 Batteries(AAA).......................2 V ideocable.........................1 and specifications are subject to change without notice. ">

Public link updated
The public link to your chat has been updated.
Advertisement