LG | VH9200DSW | LG VH9200DSW Owner’s Manual

OWNER’S MANUAL
BEDDING CLEANER
This manual contains important information and instructions for
the safe use and maintenance of the bedding cleaner. Please read
all of the information on page 3, 4, 5 for your safety. Please keep
this manual in an easily accessible place for future reference.
VH9200DSW
www.lg.com
Table of contents
Important safety instructions ............................................................................. 3~5
How to use ......................................................................................................... 6~15
Bedding Cleaner .................................................................................................................. 6
Sterilizer Station .................................................................................................................. 7
Using the Product ................................................................................................................. 8
Mounting the Cleaner at Sterilization Station ........................................................................ 9
Using the Sterilization Station (Sterilization and Charging) ................................................ 10
Effective cleaning methods according to the cleaning surfaces ......................................... 11
How to Wash Inlet .............................................................................................................. 12
Emptying Dust bin .............................................................................................................. 13
Cleaning Dust bin ............................................................................................................... 14
Care of Dust Filter ............................................................................................................... 15
Troubleshooting Guide ......................................................................................... 16
Battery specifications ........................................................................................... 17
2
IMPORTANT SAFETY INSTRUCTIONS
Read and follow all instructions before using your vacuum cleaner to prevent the risk of fire, electrical shock, personal
injury, or damage when using the vacuum cleaner. This guide does not cover all possible conditions that may occur.
Always contact your service agent or manufacturer about problems that you do not understand. This appliance
complies with the following EC Directives :-2006/95/EC Low Voltage Directive -2004/108/EC EMC Directive.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “WARNING” or “CAUTION.”
These words mean:
This symbol will alert you to hazards or unsafe practices which could cause serious
WARNING bodily harm or death.
This symbol will alert you to hazards or unsafe practices which could cause bodily
CAUTION
injury or property damage.
WARNING
1. This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety.
2. C
hildren should be supervised to ensure that they
do not play with the appliance.
3. If the supply cord is damaged, it must be replaced
by LG Electronics Service Agent in order to avoid a
hazard.
4. This appliance can be used by children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision
or instruction concerning use of the appliance in
a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children
without supervision.
3
IMPORTANT SAFETY INSTRUCTIONS
WARNING
•U
se it only on bedding items such as blankets,
mattresses, pillows, or cloth sofas.
Do not use this appliance to suck in dust, cement, or any
construction debris.
Do not use on leather upholstered surfaces.
It may cause fire and unrepairable product damage.
• T his appliance is designed for normal indoor domestic
use only. It is not to be used for any office or commercial
application.
•N
o one other than a repair technician shall disassemble
or modify the product.
It may cause fire or electrical shock.
•D
o not spray combustible materials such as gasoline or
solvents, or surfactants such as detergents or bathing
goods, or drinks near the cleaner and it’s sterilizer station.
It can cause an explosion or fire.
•D
o not allow the power cord to be crushed, kinked or cut
by heavy objects.
Using a damaged cord or plug could cause fire or electrical
shock. When the power cord is damaged, it is dangerous, so
please have the cord replaced by an authorised service center.
•D
o not let liquid such as water enter the product, and do
not use the unit to pick up liquids, sharp pointy objects,
or hot embers.
It causes fire or electrical shock.
If water accidently enters the unit, immediately turn off the
power switch of the main body, pull out the power plug, and
contact LG Electronics Service Agent to avoid hazard.
• If the ELCB, GFCI is triggered when the power is turned
on, immediately stop its use and call an Authorised
Service Provider.
Failing to do so can cause electric shock.
•D
o not insert pins or sharp pointy utensils into or around
the machine or its sterilizer station.
There is a risk of electrical shock.
•D
o not use the appliance if gas odors can be detected.
Unplug the unit and provide ventilation to avoid possible
dangers.
There is a risk of fire or explosion.
•M
ake sure that the unit is plugged into a wall socket over
10amp and not overloaded.
Overloading of any wall socket can cause fires and product
malfunction.
•D
o not use the appliance if the power cord or socket is in
any way loose or damaged.
It can cause fire or electrical shock.
•D
o not operate the appliance with the suction inlet or
outlet which are blocked.
It causes deformation of main body or fire by overheating.
•D
o not operate the cleaner while dust bin is taken out.
There is a risk of product damage or electrical shock injury.
•D
o not place power cord and the product near heating
devices.
It can cause deformation of main body, malfunction, or fire.
4
• Be careful that your fingers do not touch the pins when
you pull out the plug from the mains outlet.
It can cause electrical shock.
• Do not allow children or pets to play with the product or
use the product as a toy.
It can cause personal injury and damage to the unit.
• Do not handle the plug with wet hands.
It may cause electrical shock.
• Do not clean the inlet with water and use immediately
after drying the components first.
It may cause electrical shock and malfunction.
• When you clean the exterior, make sure to pull out the
power plug, and do not wash with harsh or abrasive
solutions.
It can cause electrical shock and exterior damage.
• Do not place hands into the intake while the appliance
is operating. Allow the unit to stop operating and
disconnect from the wall socket to avoid any personal
injury.
• Do not wash the exterior of inlet or bottom surface with
water or detergent. Use only a damp cleaning cloth.
It may damage product or cause electrical shock.
• When the sterilization is in operation, do not attempt to
look directly into the UV light.
It may harm your eyes or skin, and may cause skin ailment
such as red spots. Should this occur, consult your local
physician.
• If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified
persons in order to avoid a hazard.
• Do not use the product at a place subject to lots of
industrial oil fumes or metal particulates.
Doing so can cause fire or product failure.
• Do not use the product at a place subject to leakage or
probable leakage of combustible gases.
It may result in fire or explosion.
• Do not disassemble the battery.
There is a risk of fire or electric shock.
• Do not expose product to heat or fire.
Do not expose product direct sunlight.
There is a risk of fire and explosion.
• Do not give physical impact to the battery.
There is a risk of fire and explosion.
• Charge only as specified charger.
Please charge the right way.
The battery may be damaged and may cause a fire.
• If any liquid leaks from the batteries, avoid contact with
the skin or eyes.
If you touched the liquid, wash contact area with plenty
of water and get medical attention.
There is a risk of burns and blindness.
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
• Do not use this cleaner on anything other than
rated voltage.
It may cause fire and unrepairable product damage.
• If the product is not in use for a long period of
time, pull out the power plug.
• Static Electricity may be generated at main body
during the cleaning.
Cleaner may malfunction due to electrostatic energy,
so pull out the power cord and put it back in again.
• Big objects such as socks, stocking, tissues,
etc., may block the inlet during the cleaning, so
please remove them before starting the cleaning.
This appliance must be used to remove dust only.
• Do not place anything else on the sterilizer
station other than this appliance.
Close proximity of magnets or other active
electromechanical appliances to the sterilizer station
can cause malfunction.
• Do not stop on one spot or use it on the same
spot repeatedly for a long time.
The surface may be damaged by the friction and
vibration.
• Do not touch the bottom surface with hand or
foot while the appliance is in operation.
• Do not operate the appliance without the dust
bin and its covers in place. Always ensure the
dust bin is cleaned when it reaches its limit or
beforehand.
If it is used continuously while dust bin is full, it will
cause malfunction and overheating.
•T
o avoid the risk of fire or electric shock, always
grip it from the plug when removing. And never
pull on the power cord when removing it from the
wall socket.
• If a foreign object is attached to the bottom
surface of dust bin, remove it before using the
product.
It could compromise the suction motor and cause
malfunction and damage.
• Make sure to secure the bottom plate during
the cleaning of bedding items. Do not use the
appliance on a solid surface or flooring. Doing so
could cause damage to both the surface and to
the appliance.
• Do not store the appliance or the UV station in an
outdoor environment.
• Never use the product for removing toxic gases.
The product may fail, and toxic gases are not
removed.
• Use or place the unit on a level area and do not
apply force to the unit.
Doing so can cause fire or product failure.
• Dispose the product right way.
There is a risk of fire and explosion.
5
How to use
Bedding Cleaner
Handle
Touch Power Switch
Tank Separation Button
Dust bin
Cleaning Brush
Wheel
Outlet
Bottom Plate
Brush
Vibration Plate
Inlet
Battery
The batteries used in cordless bedding cleaner is a consumable.
Battery warranty period is six months.
(Battery replacement after the warranty period is a paid service.)
6
Switch
How to use
Sterilizer Station
Window
Cord Storage Groove
UV Lamp Status
Indicator Window
UV Lamp
7
How to use
Using the Product
Battery level indicator
1
p~
bee
2
3
p~
bee
k~
blin
Low battery condition
➊ Touch the power switch ➋ While using the product, you can check the ➌ When you want to
to operate an appliance.
battery level through battery level indicator.
stop the operation.
• Pressing touch power
switch sounds ‘beep,’
starts operation of the
product, and lights the
indicator.
• The switch must be
turned on in order to
operate the product.
8
• If the battery level is low, the bottom one
blinks repeatedly.
• Pressing touch
power switch again
sounds ‘beep,’ stops
operation of the
product, and turns
off the indicator.
How to use
Mounting the Cleaner at Sterilization Station
1
2
Sill
Groove
Gap
Protrusion
➊P
lace the product on the station in such
a way that the front side of the product
is placed first on the station to allow the
gap on the vibration plate of the product
to be inserted on the sill of the station.
➋ Place the product on the station in such
a way that the rear side of the product
to allow the groove on the bottom of the
product is caught on the protrusion of
the station.
9
How to use
Using the Sterilization Station (Sterilization and Charging)
1
2
3
UV lamp status display
Battery fully charged
➊ The plug of sterilization
station must be plugged
into outlet to use the
sterilization station.
➋ When the product is correctly
placed on the sterilizer station,
a blue indicator lights on the
UV lamp status screen and the
UV lamp starts operation for
sterilization.
The indicator and the UV
lamp are turned off 5 minutes
after placing the product on
the sterilizer station, and
sterilization stops.
➌5
minutes later the UV lamp
and UV lamp status display
automatically turns off at the
same time.
Then, sterilization operation is
complete and the product will be
charge state.
You can check the battery level
through battery level indicator.
When charging is completed,
the battery level indicator will be
turned on completely.
5 minutes later the battery level
indicator will be turned off.
The switch must be turned on in
order to charge the product.
※ If you do not use the cleaner for a long time, turn off the switch to reduce battery discharge.
10
How to use
Effective cleaning methods according to the cleaning surfaces
Bed Mattress, Bed Cover
1
Pillows, Cushions, etc.
2
➊ Bedding:
Mattress, Bed Cover
• Divide the surface to half,
and apply a forward and
backward motion to both
sides separately.
➋ Pillows: Large cushion,
normal cushion, pillow
• For smaller surfaces apply
an even forward and
backward motion.
Thin cover
3
➌ Blankets: Thick cover,
thin cover, blanket
• Apply an even backward
and forward stroke
motion.
Using tip
Unlike general handy type products, this product applies the correct weight onto the surface for the
application it is designed for.
There is no need for additional downward hand pressure when using.
Additional downward pressure can cause damage to bedding.
11
How to use
How to Wash Inlet
Bottom Plate
1
2
4
3
5
6
Fixing Grooves
➊ Place a soft cloth on
the surface, and flip
over the main body on
it with the product not
connected to the socket
outlet.
➋ Wipe down the intake
area with a damp cloth.
Make sure that there is
no foreign objects, lift
the left and the right of
the bottom plate by
pulling it up. Hold the
brush and separate it
by lifting it up.
➍ Clean the roller brush with
a vacuum cleaner or an
old unused tooth brush.
12
➌ Wash the separated
bottom plate with water
and dry it with a cloth or
place it outside in the
shade.
Do not wash the main
body or roller brush.
➎ Insert the roller brush by
matching the both side
of roller brush to fixing
grooves.
➏ Align the bottom plate
and push the both sides
of bottom plate to the
body.
How to use
Emptying Dust bin
MAX
The Dust indicator should be observed regularly.
Cleaning must be carried out before or when the
fine dust and debris has reached the MAX line
by emptying the dust bin and cleaning it (refer to
next page) before using the appliance again.
13
How to use
Cleaning Dust bin
①
②
③
Click
⑥
⑤
④
Click
① Press the tank separation button. Then lift the
dust bin from the main body.
② Hold both ends, open the filter (sponge filter +
HEPA filter), and empty the dust.
③ After separating dust bin and filter, wash dust bin
thoroughly with running water.
Refer to page 15 if sponge filters require
cleaning.
④ Completely dry it in a shady place with good
ventilation for about a day.
⑤ Insert Filter (Sponge filter + HEPA filter) into dust
bin.
⑥ Insert dust bin into main body, and push down.
If dust bin is not reassembled correctly, it will
impair the suction ability.
14
CAUTION
Make sure that the filter inserted into the
dust bin before reusing.
If the filter doesn’t inserted into the dust bin
it will cause malfunction and possible
damage to the unit.
How to use
Care of Dust Filter
①
②
Sponge Filter
HEPA Filter
HEPA Filter
Sponge Filter
HEPA Filter
④
③
HEPA Filter
① After separating the filter from dust bin, separate sponge filter from HEPA Filter in the above figure.
② Clean the HEPA filter and the gaps around the filter using the brush and a vacuum cleaner.
③ Wash the Sponge Filter in running water, and completely dry it in a shady place with good
ventilation for about a day before using it again.
④ Assemble in the reverse order of disassembly.
Store the cleaner as follows after use.
Place the product on the sterilizer station, and insert the power
code in the hole on the rear side of the station.
15
Troubleshooting Guide
If there is an abnormality in the product, check the following items first before requesting for a
service center or calling the store.
A service cost will be charged if the appliance does not have any malfunctions.
Following simple actions in the user manual may solve the problem.
CHECK
PLEASE PERFORM THE FOLLOWING ACTIONS
Weak or no suction and
vibration noise.
• Check if inlet or dust bin is blocked by any foreign objects or
debris that weaken the suction.
• Separate dust bin from the main body, and check if the filters are
dirty.
Cleaner is not working at
all?
• Check the switch is turned on.
• Check if battery level is low.
• Check if the operation procedure is correct according to the
instructions within this manual.
Why does it suddenly
stop?
• This product has an inlet motor overheat prevention device, and it
may stop temporarily when the following cases occur.
– If it is used when dust and debris in the dust bin is full and filters
are clogged.
– If it is used with the inlet blocked
– If the product is excessively used for a long time
• When power switch is accidently touched.
Loud whirring noise
coming from the cleaner?
• It is the sound of the motor’s high speed rotating brush and the
punching action at the tip of the nozzle. This is normal.
• If dust bin is not completely assembled, noise may occur.
Assemble dust bin correctly and completely.
Odor comes out of the
cleaner?
• It might be that there is some odor coming out of cleaner after
purchasing this unit for 3 months. It is normal if the unit is
operated.
• Odors can also be caused by old dust in the dust bin and filters
that has not been cleaned for some time. Empty, clean and wash
the dust bin and filters thoroughly before reusing the appliance.
Hot air comes out, and
main body is hot?
• The air coming out of the outlet holes is a little hot because it is
coming out after cooling the motor. This is normal.
UV Sterilization station
does not work.
• Check if the power cord of Sterilization station is connected into
the power socket.
• Check if the main body is placed correctly on the station.
Cleaners can not be
charged.
• Check the switch is turned on.
It only vibrates, and there
is no suction.
• Because of the suction motor overheat prevention device, this
may occur when 1) dust bin is full, 2) filter or inlet is blocked, or 3)
it is used for a long time. Allow the unit to rest and cool for at least
40 minutes before attempting to operate again.
– Before using it again, clean the filter and dust bin.
– If the inlet is blocked, please remove the foreign object.
Mains cord is defective
• The defective plug should be replaced by a qualification
electrician.
16
Battery specifications
Item/Model
Battery
Type
Lithium Ion Battery
Rating
18 V / 2000 mAh
Number of battery cell
5
Manufacturer
Neonix
Merchandiser
LG Electronics
17
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be disposed of separately from the
municipal waste stream via designated collection facilities appointed by the government
or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your
city office, waste disposal service or the shop where you purchased the product.
Disposal of waste batteries/accumulators
1. When this crossed-out wheeled bin symbol is attached to batteries/accumulators of
Your product it means they are covered by European Directive 2006/66/CE.
2. This symbol may be combined with chemical symbols for mercury(Hg), cadmium(Cd)
or lead(Pb) if the battery Contains more that 0.0005% of mercury, 0.002% of
cadmium or 0.004% of lead.
3. All batteries/accumulators should be disposed separately from the municipal waste
stream via designated collection facilities appointed by the government or the local
authorities.
4. The correct disposal of Your old batteries/accumulators will help to prevent potential
negative consequences for the environment, animal and human health.
5. For more detailed information about disposal of Your old batteries/accumulators, please
contact Your city office, waste disposal service or the shop where You purchased the
product.
Note
Made in Korea
Download PDF