LG LM-W550A Owner's manual

LG LM-W550A Owner's manual
LM-U1350/LM-U1050/LM-W550_Eng-84R
MINI HI-FI
System
OWNER'S MANUAL
MODEL
:
LM-U1350
(LM-U1350A/D/X, LMS-U1350)
LM-U1050
(LM-U1050A/D/X, LMS-U1050)
LM-W550
(LM-W550A/D/X, LMS-W550)
LM-U550
(LM-U550A/D/X, LMS-U550)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
CD-R/RW
without
Precautions
CAUTION
CAUTION
Most
RISK OF ELECTRIC SHOCK
DO NOT OPEN
concerning
appliances
the Power Cord
recommend
they
be
placed
upon
dedicated circuit;
That
is,
a
appliance
outlet circuit which powers only that
and has no additional outlets or branch circuits.
single
CAUTION: THESE SERVICING
Check the
INSTRUCTIONS ARE FOR USE BY
certain.
QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK
Do not overload wall outlets. Overloaded wall
DO NOT PERFORM ANY SERVICING OTHER
THAN THAT CONTAINED IN THE OPERATING
INSTRUCTIONS UNLESS YOU ARE
QUALIFIED TO DO SO.
Caution: The apparatus should not be
exposed to water (dripping or splashing) and
no objects filled with liquids, such as vases,
should be placed on the apparatus.
specification page
of this owner's manual to be
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part
by an authorized servicer.
or
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall
and the point where the cord exits the appliance.
CAUTION: This
product employs
a
Laser
System.
To ensure proper use of this product, please
read this owner's manual carefully and retain
for future reference. Should the unit
maintenance,
contact
an
require
authorized service
center.
Use of controls, adjustments, or the
performance of procedures other than those
specified
herein may result in hazardous
radiation exposure.
To
prevent direct exposure to laser beam, do
not try to open the enclosure. Visible laser
radiation when open. DO NOT STARE INTO
BEAM.
WARNING: Do not install this
confined space such
lar unit.
2
as a
a
equipment
bookcase
or
in
a
simi-
outlets,
Table of Contents
INTRODUCTION
OPERATION
Precautions...............................2
Presettingtheradiostations.................12
TableofContents..........................3
Listeningtotheradio......................12
BeforeUse................................4
TapePlayback............................13
BasicPlayback.........................13
ToStopPlay...........................13
.13
ToPlayRewindorFastForward.
Dubbing...............................13
SafetyPrecautions........................4
NotesonDiscs..........................4
NotesonRemoteControl...................4
NotesonTapes..........................4
FrontPanel/RearPanel.....................5
RemoteControl............................6
Connections..............................7
SpeakerSystemConnection................7
Antenna(Aerial)Connections................7
BEFORE OPERATION
AudioAdjustment........................8-10
.8
SettingtheVoltage(OPTIONAL).
SettingtheCLOCK.......................8
VolumeAdjustment.......................8
SoundQualityAdjustment..................8
SleepFunction...........................8
.
.
.
.
.
.
.
.
.
.
.
MUTE.................................9
.
.
.
.
.
.
.
.
.
.
Recording...............................13
BasicSetting...........................13
Recording from Radio, CD, USB or Auxiliary
source................................13
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.13
CDPlayback...........................14-15
BasicPlayback.........................14
ToPausePlay..........................14
ToStopPlay...........................14
ToSkipaTrack.........................14
ToSearchaTrack.......................14
ToGotothenextdiscs...................14
ToSelectadiscdirectly...................14
.14
ToReplacediscsduringPlayback.
.
.
.
.
.
.
.
.
.
TocheckMP3fileinformation...............14
9
ToRepeatPlay.........................15
ToProgramPlay........................15
DISPLAYMODE.........................9
ConnectingUSBPort......................16
DIMMER...............................9
USBdevicePlayback....................16-17
BasicPlayback.........................16
ToPausePlay..........................16
ToStopPlay...........................16
SURROUND............................9
XDSS
(Extreme Dynamic
Sound
System)
.
.
.
.
.
.
DEMO.................................9
OAO(OrientaionAcousticOptmizer).
.
.
.
.
.
.
.
.
.9
XTS-Pro...............................9
MP3OPTIMIZER.........................9
ToGotothenextcards...................16
TimerFunction..........................10
ToSkipaTrack.........................16
AuxiliaryFunction.........................10
TocheckMP3fileinformation...............16
RDSFunction-OPTIONAL..................11
ToRepeatPlay.........................17
ToProgramPlay........................17
AboutRDS.............................11
ProgrammeSearch(PTY).................11
REFERENCE
Troubleshooting..........................18
AdditionalInformation.....................18
Specifications............................19
About the
symbols
for instructions
Indicates hazards
itself
or
other
likely to cause
material damage.
Indicates
special operating
Indicates
tips
and hints for
harm to the unit
features of this unit.
making
the task easier.
3
INTRODUC
Before Use
Precautions
Safety
Handling
When
Notes
remote
volatile
such
liquids,
remote
as
the unit. Do not leave rubber
near
contact with the unit for
They
will leave marks
Cleaning
plastic products
long period
a
on
insecticide spray,
or
in
Remote control
of time.
battery
R03
the unit
solution. Do not
benzine,
or
moistened with
lightly
use
thinner,
a
these
as
might damage
alcohol,
the surface
Do not mix old and
Hold the disc
playback side of the disc.
by the edges so that fingerprints
will not
the surface.
Do not stick paper
on
Preventing
discs
Do not touch the
on
control, and insert
rear
two
batteries with
aligned correctly.
Caution
Notes
Discs
on
Handling
get
the
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
of the unit.
Notes
cover on
extremely dirty,
mild detergent
strong solvents, such
as
battery
(size AAA)
and
soft cloth
use a
installation
of the remote
are
from the front of the
sensor.
Detach the
the surface.
soft, dry cloth. If the surfaces
a
(7 m)
sensor.
To clean the cabinet
Use
and press
About 30° in each direction of the front of the
the surface clean
use
About 23 ft
Distance:
Angle:
Do not
sensor
the buttons.
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
keep
Operation Range
Point the remote control at the remote
the unit
The
To
Remote Control
Remote Control
the unit
shipping
on
Tapes
record
Removing the tab(s) of the cassette (with a small
screwdriver) will prevent accidental erasure.
Side A
or
tape
on
the disc.
Tab for side A
Tab for side B
Storing
After
discs
playing,
store the disc in its
To record
case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
there may be
increase inside the car.
sunlight,
as
Cleaning
a
considerable
the hole of the tab with adhesive
tape.
discs
the center out.
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for
4
cover
temperature
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
Do not
again,
analog
records.
Adhesive
tape.
Front Panel/Rear Panel
FM
1
GND
13
23
17
12
AU
16
X
45
RL
11
10
6
9
7
R
14
8
1.
?
POWER
?
DISC SKIP button
?
DISC DIRECT PLAY buttons
(
(DISC 1,
2.
DISC 2, DISC
PLAY MODE button
?
DEMO button
:
?
?
x STOP/CLEAR button
?
RECORD/ RECORD PAUSE
?
PRESET UP/DOWN buttons
?
PLAY
?
REVERSE PLAY
(B)
2
(DECK 2)
(zREC/X)
button
(b)
:
OPTIONAL
TUNING buttons
?
CD SKIP/SEARCH
To cancel
?
TAPE REWIND/FAST FORWARD
it, press POWER or DEMO
PROG./MEMO./ENTER button
again.)
(.m/M >)
12.
TIMER button
CLOCK button
CD OPEN
(Z OPEN)
button
XTS-Pro buttton
XDSS button
?
SURROUND
(SURR.)
(.m/M >)
button
(MIC VOL.)
?
MIC JACK
?
VOLUME CONTROL KNOB
(MIC)
-
buttons
buttons
11 .?MIC VOLUME KNOB
CD SYNC./NOR-DUBB. button
button
button
(Press DEMO in power off state to demonstrate
the function in the display window.
?
?
10.
position-TAPE
?
MP3 OPTIMIZER button
?
15
Z PUSH EJECT
(LM-U1350/1050)
?
?
L
9.
OPTIONAL
MODE/RIF/HI-DUBB. button
?
button
3)
?
?
4.
STANDBY/ON)
?
?
3.
AM
6.3mm
:
:
OPTIONAL
OPTIONAL
(EQ) button
PAUSE (CDX) button
?
EQUALIZER
?
SET/CD
?
AM-NOISE button
?
RDS button
?
MULTI JOG.
:
OPTIONAL
13.
DISPLAY WINDOW
14.
POWER CORD
OAO button
5.
HEADPHONE SOCKET
6.
?
(PHONES)
-
6.3mm
TUNER button
?
TAPE button
?
CD button
?
AUX button
?
USB button
15. SPEAKER TERMINAL
16. AUXILIARY INPUT JACKS
17. ANTENNA TERMINAL
(LM-W550)
7.
Z PUSH EJECT
8.
USB
position-TAPE
1
(DECK 1)
port (LM-U1350/1050/550)
5
INTRODUC
Remote Control
15
14
1
13
2
12
3
11
4
5
10
9
6
8
7
1.
2.
3.
4.
POWER button
PRESET
9.
/
(
)
buttons
CLOCK button
TAPE FUNCTION buttons
?
RECORD/ RECORD PAUSE
?
FORWARD PLAY
?
REVERSE PLAY
(B) button
(b) button :
TAPE STOP
button
CD FUNCTION buttons
?
?
?
?
?
?
5.
6.
CD
STOP(
)
(B/X)
button
button
CD SKIP/SEARCH
TUNING
(.m/M>) buttons
UP/DOWN (.m/M>) buttons
REPEAT button
DISC SKIP
(D.SKIP)
button
(EQ PATT.)
?
XDSS button
?
SURROUND
?
OAO button
button
NUMBER buttons
8.
MP3 file information
REWIND
(m)
button
(M)
button
TAPE-1/2 SELECT buttons
10. PROGRAM/MEMO button
15.
display (INFO)
OPTIONAL
?
USB button
?
FUNCTION button
(
/
)
button
(LM-U1350/1050/550)
14. MUTE button
XTS Pro button
7.
?
?
13.
(SURR.)
FAST FORWARD
12. VOLUME CONTROL
button
?
?
button
11. SLEEP button
EQUALIZER PATTERN
?
6
PLAY/ PAUSE
(x)
(z/X)
button
?
DISP.MODE button
?
DIMMER button
(LM-U1350/1050)
Connections
Speaker System
Connect the
speaker
Connection
cords to the
speaker
terminals.
INTRODUC
Red
Black
Left
Right Speaker
Speaker
otes
?
Be
are
?
sure
speaker
cord to the
appropriate
terminal
on
the
components:
+
to
+
and
--
to
--.
If the cords
reversed, the sound will be distorted and will lack base.
If you
the
to match the
use
front
speakers
with low maximum
input rating, adjust
the volume
carefully
to avoid excessive
output
on
speakers.
?
Do not disassemble the front
?
Be
sure
to connect the
cover
speaker
of
supplied speaker.
cord with power off.
Antenna
(Aerial) Connections
Connect the
supplied
FM/AM antennas for
listening
to the radio.
For AM(MW) reception, connect
the loop antenna (aerial) to the
terminal marked AM
FM external
antenna(aerial)
(not supplied)
75
cable
AM
loop antenna (aerial)
(Supplied)
coaxial
FM indoor
AM(MW) loop
antenna (aerial)
FM external
GND
antenna(aerial)
FM
antenna(aerial)
(not supplied)
AM
Position
it for the
best
FM 75
AM
reception
otes
?To
prevent noise pickup, keep the AM loop
?
Be
?
After
antenna away from the unit and other
fully extend the FM wire antenna.
connecting the FM wire antenna, keep it
sure
components.
to
as
horizontal
as
possible.
7
Audio
Adjustment
the
Setting
Sound
voltage (OPTIONAL)
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before connecting the AC power cord.
1
the clock
CLOCK for
-
2
The hours
Select
a
turning
requires setting, press
more than 2 seconds.)
begin to blink.
24 hour
Select
a
cycle
button
on
6
7
8
or
FLAT
12 hour
MUSICAL
cycle by
1
(24HR)
T
T
USER MODE
t
t
FLAT
can
Press SET.
3
Use MULTI JOG. to set the correct minutes.
Sleep
Press SET and the correct time is shown
1
to see the
Adjustment
(
)
press the VOLUME
control.
(
a
stereo
To
by turning
timer is
MULTI JOG.
specify
used, the power is automatically
specified
the time
time has
delay
elapsed.
before the power is
turned off, press SLEEP.
In the display window you can see
for about 5 seconds. This means that the system
turns off automatically after 90 minutes.
before it turns off is
counterclockwise to
to decrease it
on
level,
or
the remote
headphone plug ( 6.3mm)
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
pressed the time interval
reduced by 10 minutes. i.e.
80...70... etc. Select the desired time to turn off.
2
To check the
remaining
time until the power is
turned off.
function is active press SLEEP
The time remaining until it turns off is
While the
sleep
briefly.
displayed
for about 5 seconds.
ote
Headphone Socket
Connect
DRAMA
Each time the button is
to increase the sound
)
sleep
on
time.
Press VOLUME
the level
turned off after the
display.
briefly
ROCK
Function
When the
or
changes
select Three of sound mode.
Press ENTER.
Use MULTI JOG. to set the correct hours.
level,
the
When you select USER MODE, press the
ENTER button repeatedly.
2
Press CLOCK at any time
t
JAZZ
Adjuet
decrease it.
8
SALSA
T
cycle.
increase the sound
on
r
?Turn VOLUME CONTROL KNOB clockwise to
?
CLASSIC
t
(BASS, MIDDLE, TREBLE)
the
EQ button
r
SAMBA
or
POP
t
Press SET to confirm the selected hour
Volume
?
or
PATT.
panel.
You
5
the remote control
by using EQ
and hold
MULTI JOG..
(12HR)
3
4
desired sound mode
Each time you press the button the indication
as follows.
Press CLOCK.
(If
?To activate stereo sound
front
the CLOCK
Setting
Quality Adjustment
into the
when
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
time is
displayed,
timer mode
function, press the SLEEP
sleep
If you wish to stop the
button
repeatedly until SLEEP 10 appears, and then press
SLEEP once again while SLEEP 10 is displayed.
Audio
Adjustment
MUTE
DISPLAY MODE
Press MUTE to mute your unit.
You can mute your unit in order, for
Whenever you press DISPLAY MODE (DISP. MODE),
you can enjoy the spectrum change with 6 types in the
the
telephone,
example,
"MUTE" indicator blinks in the
to
answer
display
(LM-U1350/1050)
window.
display
window.
DIMMER
This function is darken the
SURROUND
To activate surround mode
?
Select
a
ROUND
desired surround mode
(SURR.)
button
on
the
by using the SURfront panel or on the
remote control.
?
Each you press the button the indication
as follows.
SURROUND OFF
VOCAL
T
t
THEATER
CINEMA
T
t
HALL
T
DISCO
t
t
by
half in
(LM-U1350/1050)
Press DEMO in power off state to demonstrate the
function in the display.
to cancel
EALAr
TUNNEL
r
CHURCH
window
power-on status. Press DIMMER once, and the display
is darken, and if you press it once more, the display will
darken by half too. To cancel it press the button again.
DEMO
changes
display
or
DEMO
During demonstration in power-on
it by using the other buttons.
OAO
SURROUND OFF
it, press POWER
(Orientation
again.
status you
Acoustic
can
cancel
Optimizer)
Press OAO to reinforce the bass sound. The "OAO"
XDSS
-
-
(Extreme Dynamic Sound System)
Press XDSS to reinforce
treble, bass and surround effect.
Each you press the button the indication
follows.
XDSS OFF
t
XDSS ON
changes
indicator
side
lights and
from the right.
"OAO OFF" passes
"OAO ON" passes by with the left
To cancel, press OAO again than
by
with the left side from the
right.
as
XTS Pro
The
unique sound quality of the LG Technology creats
the optinum sound for you to play the prefect playback
of the original sound and to feel the living sound source.
Each time you press XTS Pro the
the following order.
XTS-P ON
t
setting changes
XTS-P OFF
ote
The XTS pro function will not be
earphone has connected.
MP3
operated
when
an
Optimizer
This function is
Improve
optimizered
for
compressible
MP3 file.
the bass sound to make swweet sound.
Each time you press MP3 OPTIMZER the
changes in the following order.
setting
MP3OPTONt MP3OPTOFF
9
in
BEFORPATIN
Audio
Adjustment
Timer Function
The unit
can
set the clock function in power on/off state.
With the TIMER function you can have the radio
reception and recording, CD play, tape play, USB
Device
play
or
turned
and off at the time desired.
on
Press TIMER to enter the timer
setting mode.
TUNER-CD-TAPE-USB(LM-U1350/1050/550)
flashes in the display window in turn.
For your reference
If you want to correct the
memorized TIMER
previous
press and hold the TIMER button
seconds.
setting,
The
previous
memorized timer
indicators appear in the
3
4
on
more
than 2
time and TIMER
display.
Press SET when the desired function is
blinking.
1.
a.
When you select the TUNER
function,
'PLAY' and 'REC' indicator blink in
the
display
window
alternately
for
Press SET to confirm the minute to switch
b.
9
10
Set the hour to switch off
11
Set the minute to switch off
12
13
14
Press SET.
-
display
window and then
disappears.
2. When you select the CD or TAPE function,
'ON TIME' indicator appears for about 0.5
MULTI JOG.
Press SET to confirm the hour to switch off.
by turning
MULTI JOG.
the volume level
MULTI JOG.
Adjust
by turning
Press SET.
""
appears in the display window and the
timer setting has been completed.
15
Switch the system off.
The selected function is
automatically
switched
and off at the time set.
To cancel
display
or
check the timer
Each time the TIMER button is
the timer set
setting
button
or
cancel. You
you can select
also check the timer
pressed
can
status.
To activate
or
""
so
that
check the
"
timer, press the TIMER
"
appears in the display window.
To cancel the TIMER, press the TIMER button so that
-
seconds in the
by turning
TUNER
number with MULTI JOG. and press SET.
'ON TIME' indicator appears for about 0.5
seconds in the
on.
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
on
play only
'REC' indicator : TUNER play and
recording
Select the previous memorized preset
:
by turning
MULTI JOG.
about 3 seconds.
'PLAY' indicator
on
disappears.
For your reference
If you don't set clock, timer function doesn't work.
-
7
8
Press CLOCK to check the current time.
1
2
Set the minute to switch
disappears
in the
display
window.
window and then
disappears.
5
Set the hour to switch
6
Press SET to confirm the hour to switch
2
by turning
MULTI JOG.
Auxiliary
1
on
Connect
rear
Function
auxiliary device i.e. TV
mounted AUX phone sockets.
an
Press FUNCTION
on
or
VCR to the
the remote control.
Each time you press the button the indication
changes as follows.
FMtAMtCDtAUX
10
on.
ote
You
can
also record from the
Recording
Section.
auxiliary input
source,
see
RDS Function
OPTIONAL
-
About RDS
Programme Search (PTY)
This unit is
A
equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musi-
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
major
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
explanation
BEFORPATIN
of the PTY.
cal selection and the correct time.
RDS
Tuning
When
containing RDS data is tuned in,
the unit will automatically display the station's call sign
and the RDS indicator will light in the Display Window
as well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS
services programme (PS) if transmitted by the station.
RDS
a
FM station
Display Options
The RDS
variety
system is capable of transmitting
a
wide
of information in addition to the initial call
that appears when
RDS operation the
a
broadcast network
or
front
panel
data
types
sign
station is first tuned. In normal
will indicate the station name,
call letters. Pressing RDS on the
display
enables you to cycle
in the sequence:
through
the various
PTY
RT
CT
(FREQUENCY
PS)
PTY (Programme type recognition)- The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
name is displayed on the display window.
CT (Time controlled by the channel)- Enable the
unit to receive the actual time and show it
on
the
display window.
PS (Programme Service name)- The programme
title is displayed on the display window.
otes
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
Display
CT
being transmitted,
Window will show
a
PTY
NONE, PS NONE message.
the
NONE, RT NONE,
You may search for a specific
by following these steps:
Press TUNER
1
Select
2
a
Programme Type (PTY)
(or FUNCTION)
desired station
to select FM mode.
by pressing
.m /M >
buttons.
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
3
4
Press the RDS to select PTY mode.
different PTY, press the PRESET
UP/DOWN buttons while the last PTY in use is
To search for
still
displayed
a
to scroll
through
the list of
available PTY types.
5
When the PTY is
selected, press the
.m
/M > within 5 seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength
that matches the desired PTY
type.
11
Presetting
You
50 stations for FM and AM. Before
preset
can
make
the radio stations
5
that you have turned down the
volume to the minimum.
tuning,
sure
Press TUNER
(or FUNCTION) to select
frequency (AM or FM) you want.
Every time you press this button, AM and
changes alternately.
1
FM
the front
on
panel.
The station is stored.
2 to 5 to store other stations.
Repeat steps
6
the
To clear all the memorized stations
Press and hold PROG./MEMO.
the front
panel
on the display
on
for about two
seconds, "CLEAR" appears
window and then press CLEAR, the stations
Press .m/M > buttons on the front
panel until the frequency indication starts to
2
Press PROG./MEMO.
are
cleared.
change.
For your reference
If all stations have already been
otes
Automatic
will appear in the display window for a moment and then
a preset number will blink. To change the preset number,
Tuning
Press the .m/M > buttons.
-
Scanning stops
Manual
follow the
when the unit tunes in
a
station.
Tuning
3
Press PROG./MEMO.
A
the front
preset number will flash in the
Press PRESET+/- buttons
on
the remote
control)
(or
4-5.
presets
Press and hold PRESET buttons
panel
display window.
.
on
the remote
or
appears
4
steps
To recall
Use the MULTI JOG.
on
entered, FULL message
PRESET
to select the
(
/
control) until the
press it repeatedly.
(or
PRESET
desired
/
(
)
preset number
)
preset
number you want.
Listening
1
to the radio
Press .m/M > (or FUNCTION) to
select the frequency (AM or FM) you want.
To turn off the radio
Every time you press
changes alternately.
function mode
this
Press POWER to turn the unit off
button, AM and FM
The last received station is tuned in.
(CD,
TAPE
For your reference
If an FM program is
?
2
Press PRESET+/- buttons
on
the remote
(or PRESET ( /
control) repeatedly to select
preset station you
-
3
)
the
the volume
CONTROL
/
()
To listen to
on
by rotating VOLUME
KNOB (or pressing VOLUME
the remote control) repeatedly.
non-preset
?
Use manual
?
For automatic
or
automatic
radio stations
tuning
in
step
tuning, press and hold
.m/M > buttons on the front
2.
panel.
so
select another
AUX).
noisy
that "STEREO"
disappears
on
the
display window. There will be no stereo effect,
the reception will be improved. Press MODE/RIF
again to restore the stereo effect.
want.
Each time you press the button, the unit tunes in
one preset station at a time.
Adjust
Press MODE/RIF
or
or
?
but
To
improve reception
Repose the supplied antennas.
otes
Use MODE/RIF
switch to
mono
(Radio Interference Filter) function
reception if stereo reception is
distorted
When
by noise.
recording the MW(AM) broadcast,
to
beat noises
may occur. If it does, press MODE/RIF once.
When listening the MW(AM) broadcast, beat noises
may occur. If it does, press AM-NOISE once.
Each time you press AM-NOISE the setting changes
in the following order.
AM NOISE ON
12
t
AM NOISE OFF
Tape Playback
Basic
To
Playback
Press TAPE 1/2 to select TAPE 1
1
TAPE" appears in the
("NO
2
3
4
Open
STOP(x)/CLEAR
STOP(x) on the remote
display window.)
To
cassette TAPE 1
Z PUSH EJECT
Insert
(or 2) by pushing
position.
two cassette with the
one or
Press PLAY
(B
b:OPTIONAL
or
AUTO STOP DECK
to
(or 2).
Rewind
Play
After
tape side
the bottom and then close the TAPE 1
After auto
Press
TAPE 2.
or
Stop Play
pressing
m/M
on
control
or
Fast Forward
press PLAY
(B)
at the
point
the front
panel
during playback,
.m/M >
the remote control
on
panel or TAPE
during playback.
the front
on
or
you want.
Dubbing
).
This function shows how to record from
(TAPE 1/2)
stop deck plays only front side, the unit stops
tape
to
tape.
1
Press TAPE 1/ 2.
?
Cassette TAPE 1- Insert
a
playback tape
?
Cassette TAPE 2- Insert
a
blank
to dub.
tape.
automatically.
AUTO REVERSE DECK
You
can
(TAPE 2):OPTIONAL
select direction of the cassette you want
pressing
by
2
Press NOR-/ HI-DUBB.
PLAY MODE.
Pressing
Pressing
After the cassette
Once
plays front
reverse(backward play) side,
stops automatically.
OR
or
To
follow.
Function
Display
NOR-
DUBB.
DUBB.
NOR DUBB
HI-
HI-SP. DUBB.
DUBB.
HI DUBB
Function
Display
as
Normal
speed
dubbing
(LM-U1350/1050)
(LM-W550/U550)
Double
speed
dubbing
(LM-U1350/1050)
(LM-W550/U550)
After the cassette
Twice
OR
reverse
plays front and
side, stops automatically.
stop recording, press STOP(x).
After the cassette
Three
OR
times
six times
plays
repeatedly front and
stops automatically.
reverse
ote
?
The USB device
opening
side,
the
or
USB
tape-door
ports may be damaged if
when the USB device is
con-
nected.
Recording
Wind the
Basic
1
2
to the
tape
point recording
starts. Use
only
normal
To
Setting
Press CD
or
TUNER
USB.
(or TUNER/BAND),
Open
the cassette TAPE 2 and insert
cassette into the cassette
Set the
recording
a
blank
compartment.
direction
:
repeatedly
recording
direction.
Recording from Radio, CD, USB
Auxiliary source
2
Press TAPE
or
Press
The
the front
PLAY(B)
recording begins.
To Pause
on
STOP(x).
Tape Synchronized Recording
complete
and
a
cassette.
1
synchro recording function dubs
programmed titles automatically into
Press CD SYNC. in stop mode.
"REC" blinks and CD SYNC. is lit
on
the
CD
display
window.
The
synchronized recording is started
automatically after about 7 seconds.
ote
?
If you wish to record the desired
track, select the
desired track with .m/M > before
commencing CD synchro recording.
panel.
recording
To pause the recording, press z REC/X
or z/X on the remote control again.
"REC" blinks
only.
a
2
Press z REC/X on the front panel.
"REC" blinks and holds the cassette in pause
mode.
record from cassette deck 2
The CD
OPTIONAL
to set the
can
Stop recording
CD to
Press PLAY MODE
1
tapes. You
on
the
display
on
front
panel
window.
13
OPERATION
CD
Playback
Basic
Playback
Press
1
2
1
To Search
STANDBY/ON to turn
on
the unit.
After
pressing
the remote
on
at the
Press the CD button
on
the front
no
is
displayed.
disc is entered in the disc
tray, the "NO DISC"
and
(Z OPEN)
the disc
place
the left
on
is
(DISC 1)
played
This function is not available to
?
Press DISC SKIP
With the label side up
ote
of the
4
8cm(3 inch) disc, put
Press CD OPEN
it onto the inner circle
(Z OPEN)
disc
a
the front
on
playing
time
are
dis-
played.
To
Replace
You
can
discs without
1
DISC 3
during playing
or
discs
during Playback
during playing a disc to
played next and replace
interrupting playback of the current disc.
Press the CD OPEN
The disc
tray is
appear. Even if
(Z OPEN)
opened. Two disc compartments
the unit is playing a disc, it doesn't
stop playing.
2
discs in the compartments with
Replace
The unit
the disc in the left
plays
compartment
disc, and then the
right compartment.
3
PLAY(B) on the front panel or CD PLAY/
PAUSE (B/X) on the remote control.
In addition, you can also play an Audio CD or MP3
CD using the NUMBER buttons.
new
ones.
after the current
Press
Press CD OPEN
one
in the
(Z OPEN).
The CD door is closed.
otes
?
Play
Do not
tray
panel or CD PLAY/
PAUSE (B/X) on the remote control during playback.
Press this button again it to resume play.
on
or
open the disc tray
check what discs are to be
displayed.
(CDX)
directly
When you press DISC 1-3 before playing a disc, the unit
will automatically start playing the selected disc.
MP3 CD: "READING" appears in the display
window, and then the total number of files
Press CD PAUSE
the
on
stopping.
to close the disc
Audio CD: "READING" appears in the display
window, and then the total number of
To Pause
MP3 file.
To Select
compartment.
tracks and the
5
a
remote control
tray.
is
play
panel or D.SKIP
during playing or stopping.
first.
DISC 1
an
release
you want.
Press DISC 1, DISC 2
To load
button
To Go to the next discs
into the disc tray.
The disc
holding .m/M >
control during playback, then
otes
Press CD OPEN
3
and
to enter
panel
the CD mode.
If
point
Track
a
the front
?
place
at the
than
more
same
on one
disc
time.
Do not
the disc
may
the unit.
push
damage
compact disc
one
tray
to close CD
door,
as
you
To check MP3 file information
To
Stop Play
Press the INFO button
Press
STOP(x)/CLEAR
STOP(x) on the remote
on
the front
control
CD
panel
during playback.
or
-
will be shown in
-
To
?
?
Skip
a
Track
a
track, the player
that track. When it is
skipped
each time
If there is
playback.
Album) of the MP3
(Title, Artist or
the display window.
the information of the MP3
no
returns to the start of
pressed again, a track
the button is pressed.
file
file, "NO ID3
display
window.
otes
?
is
This unit
can
audio titles
?
play
The MP3 file
a
CD-R
or
CD-RW that contains
MP3 files.
or
name
using English.
14
MP3 file
TAG" indicator will be shown in the
Press M > button to go to the next track.
When .m button is pressed once midway
through
The information
during
and ID3 TAG should be named
CD
Playback
To
Repeat Play
To
play
one
Press REPEAT
"
once
1" appears
-
To
play
one
Press REPEAT
"
on
To
play
disc
"
display
To cancel
can
the
on
window.
on
once more
display
the
PROGRAM/MEMO
display
window.
2
Press REPEAT several times until
repeat indicator
3
Program repeat play
Press REPEAT
once
during
-"
1" appears on the
(One track repeat)
?
Press REPEAT
-"
(All
contain up
can
on
the front
panel
or
the remote control in the
on
Press DISC SKIP
(DISC1/2/3)
on
or
DISC DIRECT PLAY
the front
panel
or
D.SKIP
the
on
remote control to select the disc.
repeat play
disappears.
?
the discs and
stop mode.
repeatedly
during playback.
on
Press PROG./MEMO.
1
window.
all discs
on
to 20 tracks.
again during playback.
ALL DISC" appears
-
You
repeatedly
all tracks
Press REPEAT
repeatedly
the
Program Play
arrange the order of the tracks
create your own program. The program
during playback.
1 DISC" appears
-
-
track
To
display
again during
ALL DISC" appears
program
program
on
the
the front
panel
or on
on
the remote control to
select the track.
play.
window.
program
Press CD SKIP/ SEARCH .m/M >
4
Press PROG./MEMO.
5
Repeat steps
6
Press
play.
display
window.
repeat)
PROGRAM/MEMO
on
on
the front
panel
or
the remote control.
1~4.
PLAY(B) on the front panel or
PAUSE (B/X) on the remote control.
CD PLAY/
To check program contents
Press PROG./MEMO.
remote
-
The
control)
in the
PROGRAM/MEMO
(or
on
the
stop mode.
disc, track and program number will be displayed.
To clear program contents
Press PROG./MEMO.
remote
CLEAR
control)
on
on
the
the front
PROGRAM/MEMO
(or
on
the
stop mode. And then press
panel
or
CD
STOP(x)
on
the
remote control.
To add program contents
1.
Press PROG./MEMO.
remote
(or PROGRAM/MEMO on
control) repeatedly in the program stop
the
mode until "Disc Number" blinks.
2.
Repeat steps
To
modify program
1.
Press the PROG./MEMO.
PROGRAM/MEMO
the remote
program number you
want to
2.
2~4.
control)
modify.
Repeat steps
contents
to
(or
display
on
2~4.
15
OPERATION
USB
Connecting
port
LM-U1350/1050/550
Readable Card
SmartMedia
-
-
Card(SMC)
Compact Flash Card(CFC)
Micro Drive(MD)
Secure Digital Card(SD)
Multi Media Card(MMC)
Memory Stick(MS)
Memory Stick Pro(MS-Pro)
Compatable with : FAT12,16,32
Only use the memory cards
recommended
1
2
Plug
the USB device into the USB port of your
Press USB button
Don't
on
the front
panel.
MP3
1
or
a
Numbers of file available
?
Be
?
No
memory card while
to
sure
are
maximum 999 EA.
file in the memory card after
hard disk is supported.
save
cladding
The MP3 player requiring
supported.
installation of
drive is not
To Go to the next cards
Playback
Press the USB button
on
the front
panel
to
enter the USB mode.
"CHECKING" appears in the display window, and
then the total number of files is displayed.
Press
PLAY(
PAUSE
(
Press DISC SKIP
)
)
on
the front
panel
or
CD PLAY/
To
?
Press CD PAUSE
PLAY/ PAUSE
(
the front
on
Track
a
Press M > button to go to the next track.
When .m button is pressed once midway
a
track, the player
skipped
returns to the start of
pressed again,
each time the button is
Press the INFO button
-
The information
will be shown in
it to
resume
play.
-
If there is
during
a
track is
pressed.
MP3 file
playback.
Album) of the MP3
(Title, Artist or
the display window.
the information of the MP3
no
TAG" indicator will be shown in the
Stop Play
STOP(x)/CLEAR on the front panel or CD
STOP(x) on the remote control during playback.
file
file, "NO ID3
display
window.
otes
Press
?
This unit
can
play
USB device that contains
MP3/WMA files.
?
The MP3 file
name
and ID3 TAG should be named
using English.
16
the
To check MP3 file information
(CD ) on the front panel or CD
) on the remote control during
again
on
that track. When it is
playback.
Press this button
Skip
through
on
Play
panel or D.SKIP
during playing or stopping.
remote control
the remote control.
In addition, you can also play using the NUMBER
buttons.
To Pause
To
a
formatting.
Playback
?
2
by using
playing
the USB.
USB device
Basic
player
the memory card when
multi card reader.
or remove
?
?
remove a
playing
Don't add
the USB
unit.
otes
?
?
?
This
player
can
not format memory card.
?
This
player
can
not
use
USB HUB.
USB device
To
Repeat Play
To
play
one
Press REPEAT
"
To
play
one
Press REPEAT
"
once
on
To
play
disc
"
display
To cancel
window.
the
on
on
once more
display
all discs
repeatedly
during playback.
on
the
display
window.
repeat play
Press REPEAT several times
until
Press REPEAT
once
-"
during
1" appears on the
(One track repeat)
Press REPEAT
-"
again during
ALL DISC" appears
program
repeat)
on
play.
window.
program
the
PROGRAM/MEMO
on
the discs and
contain up
can
2
3
the front
panel
or
the remote control in the
on
Press DISC SKIP front
panel
or
D.SKIP
on
the
remote control to select the disc.
Press CD SKIP/ SEARCH .m/M >
the front
panel
or on
on
the remote control to
select the track.
4
5
Press PROG./MEMO.
6
Press
play.
display window.(All
on
stop mode.
repeat indicator
program
display
Press PROG./MEMO.
1
window.
Program repeat play
?
can
to 20 tracks.
disappears.
?
You
again during playback.
ALL DISC" appears
-
Program Play
repeatedly
all tracks
Press REPEAT
repeatedly
the
To
arrange the order of the tracks
create your own program. The program
during playback.
1 DISC" appears
-
-
track
1" appears
-
Playback
PROGRAM/MEMO
Repeat steps
on
on
the front
panel
or
the remote control.
1~4.
PLAY(B) on the front panel or
PAUSE (B/X) on the remote control.
CD PLAY/
To check program contents
Press PROG./MEMO.
remote
-
The
control)
in the
PROGRAM/MEMO
(or
on
the
stop mode.
disc, track and program number will be displayed.
To clear program contents
Press PROG./MEMO.
remote
CLEAR
control)
on
on
the
the front
PROGRAM/MEMO
(or
on
the
stop mode. And then press
panel
or
CD
STOP(x)
on
the
remote control.
To add program contents
1.
Press PROG./MEMO.
remote
(or PROGRAM/MEMO on the
control) repeatedly in the program stop mode
until "Track Number" blinks.
2.
Repeat steps
To
modify program
1.
Press the PROG./MEMO.
PROGRAM/MEMO
the remote
program number you
want to
2.
2~4.
control)
modify.
Repeat steps
contents
to
(or
display
on
2~4.
17
OPERATION
Troubleshooting
Check the
for the
following guide
possible
cause
of
a
problem
before
contacting
service.
Correction
Cause
Symptom
No power.
?
The power cord is disconnected.
?
Plug the power
securely.
No sound.
?
The audio cables
?
Connect the audio cable into the
are
not connected
securely.
The
?
speaker
to the wrong
The unit does not start
playback.
jacks
securely.
The power of the external
ment is switched off.
?
cord into the wall outlet
?
No disc
?
An
?
The disc is
or
?T urn
equip-
source
?
Set the
is inserted.
unplayable
or
tape
placed upside
connected with
speaker cable to the correct
position, then turn on the unit again by
pressing POWER.
?
Insert
a
disc disc
or
?
Insert
a
playable
disc
?
Place the disc with the
position.
disc
equipment
the audio cable.
cable is set
tape
the
on
is inserted.
down.
tape.
or
tape.
playback
side
down.
The disc is not
?
placed
within the
guide.
Place the disc
?
inside the
The remote control
does not work
?
The disc is
?
The remote control is not
remote
properly.
dirty.
sensor
pointed
at the
There is
an
obstacle in the
path
guide.
?
Point the remote control at the remote
sensor
of the
tray correctly
Clean the disc.
of the unit.
?
Operate the
23ft(7m).
?
Remove the obstacle.
?
Replace
unit.
?
the disc
?
of the unit.
The remote control is too far from the
?
on
remote control within about
remote control and the unit.
The batteries in the remote control
?
are
the batteries with
new ones.
exhausted.
Additional Information
5.
About MP3
?
?
compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call files
that have the ".mp3" file extension "MP3 files".
The unit can not read an MP3 file that has not ".mp3"
An MP3 file is audio data
?
MP3/WMA Disc
as
1.
2.
3.
4.
a
Microsoft audio
Media
Audio)
compression
tech-
offers double the audio
the MP3 format.
or
using
or
30 letters
or
less
"wma" extension
"********.WMA".
6.
Donotusespecialletterssuchas"/:*?"<>"etc.
7.
Even if the total number of files
more
than 1000, it will
compatibility
/ 8
with this unit is limited
48kHz
32
44.1
Sampling Frequency
(MP3),
kHz (WMA)
Bit rate / 8 320kbps (MP3), 32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback MP3
files. We recommend that you use "Easy-CD
-
-
Creator", which
-
-
creates
an
This function
to
a
ex)
ISO9660 file
system.
recognizes
disc of CD-ROM
If there
only
on
the disc have
be shown up to 999.
are
the multi session disc
are
MP3/WMA files in the first
only
according
type.
MP3/WMA file in the first session is
If there
follows:
18
incorporate ".mp3"
e.g. "********.MP3"
-
nology.
WMA(Windows
compression of
should be named
About MULTI SESSION
About WMA
An WMA file is
names
and must
file extension.
?
File
session, the
only played.
MP3/WMA files in the whole
ses-
sion, all of the MP3/WMA files in the session are
played. If there is Audio CD in the first session,
only
the Audio CD in the first session is
played.
Specifications
MODEL
SECTION
[Genral]
Refer to the back
Power
consumption
External dimensions
FM
AM
supply
Mass
[CD]
[Tuner]
Power
LM-U1350A/D/X
(MW)
[Amp]
[TAPE]
H
LM-U1050A/D/X
panel
of the unit.
60W
50W
45W
6.3
6.3
6.3
Frequency response
Signal-to-noise ratio
Dynamic range
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
40
18000 Hz
Frequency Response
60
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output Power
522-1620kHzor520-1720kHz
T. H.D
0.5 %
Frequency Response
Signal-to-noise ratio
Tape Speed
42
Wow Flutter
0.25
F.F/REW Time
120
Frequency Response
Signal to Noise Ratio
Channel Separation
125
40 dB
Erase Ratio
55
x
D)
-
x
366
Designs
70 dB
87.5
108.0 MHz
-
or
65
-
MHz,
87.5
-
108.0 MHz
60/55 dB
10000 Hz
-
450 kHz
35 dB
120
2000 Hz
-
130W+130W
100W+100W
50W+50W
20000 Hz
-
75 dB
4.75 cm/sec
%(MTT -111, JIS-WTD)
sec (C-60)
8000Hz
-
dB(P/B) / 45 dB(R/P)
dB(MTT-5511)
50
3
Way
3
Speaker
LMS-U1050
3
Way
4Ω
50
-
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
subject
(1m)
2
Way
55
-
Speaker
8Ω
20000 Hz
85 dB/W
2
(1m)
56
-
20000 Hz
85 dB/W
(1m)
100 W
50W
260 W
200 W
100 W
5kg
change
Speaker
130 W
227X327X312mm
to
3
LMS-W550/U550
4Ω
20000 Hz
86 dB/W
Rated
are
74
10.7 MHz
Sound Pressure Level
specifications
REF NC
70 dB
Type
Impedance
Frequency Response
and
kg
mm
LMS-U1350
[Speakrs]
kg
x
x
326
kg
273
(W
LM-W550A/D/X
LM-U550A/D/X
227X327X272mm199X326X232mm
4.2
kg
2.78
kg
without notice.
19
P/NO
:
3834RH0084R
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement