LG | LM-U1350A | Owner's Manual | LG LM-U1350A Owner's manual

LG LM-U1350A Owner's manual
LM-U1350/1050_ENG
MINI HI-FI
System
OWNER'S MANUAL
MODEL
:
LM-U1350
(LM-U1350A/D/X, LMS-U1350)
LM-U1050
(LM-U1050A/D/X, LMS-U1050)
LM-W550
(LM-W550A/D/X, LMS-W550)
LM-U550
(LM-U550A/D/X, LMS-U550)
Please read this manual
carefully
before
operating your
set.
Retain it for future reference.
Designs
and
notice for
specifications
improvement.
are
subject
to
change
CD-R/RW
without
Precautions
CAUTION
CAUTION
concerning
the Power Cord
Most
appliances recommend they be placed upon a
dedicated circuit;
That is, a single outlet circuit which powers only that
appliance and has no additional outlets or branch circuits.
Check the specification page of this owner's manual to be
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: THESE SERVICING
INSTRUCTIONS ARE FOR USE BY
certain.
QUALIFIED SERVICE PERSONNEL ONLY.
TO REDUCE THE RISK OF ELECTRIC SHOCK
DO NOT PERFORM ANY SERVICING OTHER
Do not overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed power
THAN THAT CONTAINED IN THE OPERATING
cords,
INSTRUCTIONS UNLESS YOU ARE
QUALIFIED TO DO SO.
Caution: The apparatus should not be
exposed
no
(dripping or splashing) and
with liquids, such as vases,
to water
objects
should be
filled
placed
on
the apparatus.
damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part
by an authorized servicer.
or
Protect the power cord from physical or mechanical abuse,
such as being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
POWER: This unit operates
on
mains
a
of
supply
220/240V,
50/60Hz.
WIRING: This unit is
CAUTION: This product
employs
a
mains
Laser
plug,
fused at 3 amp. When
System.
amp BS 1362, BSI
proper use of this product, please
read this owner's manual carefully and retain
the fuse
To
ensure
for future reference. Should the unit
maintenance,
contact
an
require
authorized service
with
supplied
cover
or
ASTA
sockets in your
a
Use of controls, adjustments, or the
performance of procedures other than those
WARNING: A mains
specified herein may
result in hazardous
be
must
To prevent direct exposure to laser beam, do
not try to open the enclosure. Visible laser
radiation when open. DO NOT STARE INTO
or
fuse
this
plug
with the earth
plug
with
contact
cover
suitable for the mains
a
suit-
A mains
plug
with bared wires is
mains socket.
a
symbol
is
3
removed from the mains lead of this
or
fitted,
use a
pin,
marked with the letter E
coloured green
3 amp
green and
or
yellow.
fuse, either in the plug,
or
at
the distribution board.
IMPORTANT: The wires in this mains lead
WARNING: Do not install this
confined space such
lar unit.
use
use a
instructions below:
wiring
Do not connect either wire to the earth
If any other
BEAM.
plug
destroyed.
hazardous if inserted in
radiation exposure.
always
home, then the plug should be removed and
able type fitted. Please refer to the
player
Never
not
13 amp
approved
the fuse
replacement
type of plug supplied is
center.
DVD
replacing
approved type.
omitted. To obtain
your dealer. If the
BSI 1363
a
as a
equipment
bookcase
or
in
a
simi-
dance with the
-
BLUE:
following
accor-
codes:
NEUTRAL, BROWN: LIVE
in the mains lead of this DVD
coloured
coloured in
are
marking identifying
player
-
As the colours of the wires
may not
correspond
the terminals in your
with the
plug, proceed
as
follows: The wire which is coloured blue must be connected to the
terminal which is marked with the letter N
or
coloured black. The
wire which is coloured brown must be connected to the terminal
which is marked with the letter L
2
or
coloured red.
Table of Contents
INTRODUCTION
OPERATION
Precautions...............................2
Presettingtheradiostations.................12
TableofContents..........................3
Listeningtotheradio......................12
BeforeUse................................4
TapePlayback............................13
BasicPlayback.........................13
ToStopPlay...........................13
.13
ToPlayRewindorFastForward.
Dubbing...............................13
SafetyPrecautions........................4
NotesonDiscs..........................4
NotesonRemoteControl...................4
NotesonTapes..........................4
FrontPanel/RearPanel.....................5
RemoteControl............................6
Connections..............................7
SpeakerSystemConnection................7
Antenna(Aerial)Connections................7
BEFORE OPERATION
AudioAdjustment........................8-10
.8
SettingtheVoltage(OPTIONAL).
SettingtheCLOCK.......................8
VolumeAdjustment.......................8
SoundQualityAdjustment..................8
SleepFunction...........................8
.
.
.
.
.
.
.
.
.
.
.
MUTE.................................9
.
.
.
.
.
.
.
.
.
.
Recording...............................13
BasicSetting...........................13
Recording from Radio, CD, USB or Auxiliary
source................................13
CDtoTapeSynchronizedRecording.
.
.
.
.
.
.
.
.13
CDPlayback...........................14-15
BasicPlayback.........................14
ToPausePlay..........................14
ToStopPlay...........................14
ToSkipaTrack.........................14
ToSearchaTrack.......................14
ToGotothenextdiscs...................14
ToSelectadiscdirectly...................14
.14
ToReplacediscsduringPlayback.
.
.
.
.
.
.
.
.
.
TocheckMP3fileinformation...............14
9
ToRepeatPlay.........................15
ToProgramPlay........................15
DISPLAYMODE.........................9
ConnectingUSBPort......................16
DIMMER...............................9
XTS-Pro...............................9
USBdevicePlayback....................16-17
BasicPlayback.........................16
ToPausePlay..........................16
ToStopPlay...........................16
MP3OPTIMIZER.........................9
ToGotothenextcards...................16
TimerFunction..........................10
ToSkipaTrack.........................16
AuxiliaryFunction.........................10
TocheckMP3fileinformation...............16
RDSFunction-OPTIONAL..................11
ToRepeatPlay.........................17
ToProgramPlay........................17
SURROUND............................9
XDSS
(Extreme Dynamic Sound System)
.
.
.
.
.
.
DEMO.................................9
OAO(OrientaionAcousticOptmizer).
.
.
.
.
.
.
.
.
.9
AboutRDS.............................11
ProgrammeSearch(PTY).................11
REFERENCE
Troubleshooting..........................18
AdditionalInformation.....................18
Specifications............................19
About the
symbols
for instructions
Indicates hazards
itself
or
other
likely to cause
material damage.
Indicates
special operating
Indicates
tips
and hints for
harm to the unit
features of this unit.
making
the task easier.
3
INTRODUC
Before Use
Precautions
Safety
Handling
When
Notes
volatile
such
liquids,
contact with the unit for a
They
will leave marks
Cleaning
on
insecticide spray,
as
plastic products
or
long period
in
Remote control
of time.
battery
Detach the
the surface.
the unit
solution. Do not
benzine,
or
use
thinner,
are
moistened with
lightly
these
a
as
might damage
alcohol,
the surface
Do not mix old and
Hold the disc
playback side of the disc.
by the edges so that fingerprints
will not
the surface.
Do not stick paper
on
Preventing
discs
Do not touch the
on
rear
batteries with
aligned correctly.
Caution
Notes
Discs
on
Handling
get
the
new
batteries. Never mix different
types of batteries (standard, alkaline, etc.).
of the unit.
Notes
cover on
extremely dirty,
mild detergent
strong solvents, such
as
battery
(size AAA)
and
soft cloth
use a
installation
of the remote control, and insert two
R03
soft, dry cloth. If the surfaces
a
from the front of the
About 30° in each direction of the front of the
To clean the cabinet
Use
(7 m)
remote sensor.
the unit. Do not leave rubber
near
and press
remote sensor.
the surface clean
use
About 23 ft
Distance:
Angle:
Do not
sensor
the buttons.
original shipping carton and packing materials
come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.
keep
Operation Range
Point the remote control at the remote
the unit
The
To
Remote Control
Remote Control
the unit
shipping
on
Tapes
record
Removing the tab(s) of the cassette (with a small
screwdriver) will prevent accidental erasure.
Side A
or
tape
on
the disc.
Tab for side A
Tab for side B
Storing
After
discs
playing,
store the disc in its case.
Do not expose the disc to direct sunlight or sources
of heat, or leave it in a parked car exposed to direct
there may be
increase inside the car.
sunlight,
as
Cleaning
a
cover
the hole of the tab with adhesive
tape.
discs
the center out.
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for
4
again,
considerable temperature
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
Do not
To record
analog
records.
Adhesive tape.
Front Panel/Rear Panel
FM
1
GND
13
23
17
12
AU
16
X
45
RL
11
10
6
9
7
R
14
8
1.
?
?
?
POWER
STANDBY/ON)
(
9.
button
DISC SKIP button
10.
DISC DIRECT PLAY buttons
?
?
PLAY MODE button
DEMO button
:
?
OPTIONAL
?
?
(LM-U1350/1050)
in power off state to demonstrate
the function in the display window.
?
To cancel it, press POWER or DEMO
PROG./MEMO./ENTER button
?
(Press DEMO
?
?
?
?
?
?
?
again.)
MODE/RIF/HI-DUBB. button
MP3 OPTIMIZER button
?
CD SYNC./NOR-DUBB. button
12.
TIMER button
?
CLOCK button
?
?
4.
?
?
?
CD OPEN (Z OPEN) button
XTS-Pro buttton
?
?
XDSS button
SURROUND
?
(SURR.)
button
OAO button
6.
HEADPHONE SOCKET
?
?
?
?
?
(PHONES)
-
6.3mm
TUNER button
RECORD/ RECORD PAUSE
PRESET UP/DOWN buttons
PLAY
(B)
(zREC/X)
button
button
REVERSE PLAY
TUNING buttons
(b)
button
:
OPTIONAL
CD SKIP/SEARCH (.m/M >) buttons
TAPE REWIND/FAST FORWARD
buttons
VOLUME KNOB
MIC JACK
(MIC)
-
(MIC VOL.)
6.3mm
:
:
OPTIONAL
OPTIONAL
VOLUME CONTROL KNOB
EQUALIZER
(EQ) button
SET/CD PAUSE (CDX) button
AM-NOISE button
RDS button
:
OPTIONAL
MULTI JOG.
POWER CORD
15. SPEAKER TERMINAL
16. AUXILIARY INPUT JACKS
TAPE button
17. ANTENNA TERMINAL
CD button
AUX button
(DECK 2)
13. DISPLAY WINDOW
14.
5.
2
x STOP/CLEAR button
11 .?MIC
?
3.
position-TAPE
(.m/M >)
?
?
L
15
Z PUSH EJECT
?
(DISC 1, DISC 2, DISC 3)
2.
AM
(LM-W550)
USB button
7.
Z PUSH EJECT
8.
USB port
position-TAPE
1
(DECK 1)
(LM-U1350/1050/550)
5
INTRODUC
Remote Control
15
14
1
13
2
12
3
11
4
5
10
9
6
8
7
1.
2.
3.
POWER button
PRESET
9.
/
(
)
TAPE FUNCTION buttons
?
buttons
?
CLOCK button
?
4.
CD FUNCTION buttons
?
?
?
?
?
?
5.
6.
PLAY/ PAUSE
CD
STOP(
)
(B/X)
button
?
button
?
CD SKIP/SEARCH
(.m/M>) buttons
TUNING UP/DOWN (.m/M>) buttons
REPEAT button
DISC SKIP
(D.SKIP)
?
?
?
?
(EQ PATT.)
button
XDSS button
?
?
button
15.
XTS Pro button
?
?
6
NUMBER buttons
8.
MP3 file information
TAPE STOP
button
(x)
FAST FORWARD
REWIND
(m)
display (INFO)
button
(M)
button
TAPE-1/2 SELECT buttons
USB button
(
/
)
button
(LM-U1350/1050/550)
FUNCTION button
14. MUTE button
OAO button
7.
REVERSE PLAY
10. PROGRAM/MEMO button
13.
(SURR.)
button
(B) button
(b) button : OPTIONAL
12. VOLUME CONTROL
button
SURROUND
FORWARD PLAY
(z/X)
11. SLEEP button
EQUALIZER PATTERN
?
?
RECORD/ RECORD PAUSE
button
DISP.MODE button
DIMMER button
(LM-U1350/1050)
Connections
Speaker System Connection
Connect the
speaker
cords to the
speaker
terminals.
INTRODUC
Red
Black
Left
Right Speaker
Speaker
otes
?
Be
are
the
?
to match the
speaker
use
front
speakers
appropriate
with low maximum
terminal
on
the components:
+
to
+
and
--
to
--.
If the cords
input rating, adjust
the volume
carefully
to avoid excessive
output
on
speakers.
Do not disassemble the front
Be
cord to the
reversed, the sound will be distorted and will lack base.
If you
?
?
sure
sure
to connect the
cover
speaker
of
supplied speaker.
cord with power off.
Antenna
(Aerial) Connections
Connect the
supplied
FM/AM antennas for
listening
to the radio.
For
the
FM external
terminal marked AM
antenna(aerial)
(not supplied)
AM
loop antenna (aerial)
(Supplied)
75
coaxial
cable
FM indoor
AM(MW) reception, connect
loop antenna (aerial) to the
AM(MW) loop
antenna (aerial)
GND
antenna(aerial)
FM
FM external
antenna(aerial)
(not supplied)
AM
Position
it for the
best
FM 75
AM
reception
otes
?T
?
?
o
Be
prevent noise pickup, keep the AM loop
fully extend the FM wire antenna.
connecting the FM wire antenna, keep it
sure
After
antenna away from the unit and other
components.
to
as
horizontal
as
possible.
7
Audio
Adjustment
the
Setting
Sound
voltage (OPTIONAL)
If your set is equipped with a voltage selector at the
back side, be sure to set it to your local power supplied
before connecting the AC power cord.
1
Select
a
button
on
by using EQ
desired sound mode
the remote control
or
EQ button
the clock
requires setting, press
CLOCK for more than 2 seconds.)
The hours begin to blink.
2
Select
a
turning
cycle
FLAT
POP
t
MUSICAL
cycle by
CLASSIC
t
ROCK
t
5
6
7
8
SAMBA
t
FLAT
1
(24HR)
can
select Three of sound mode.
Adjuet
2
Use MULTI JOG. to set the correct hours.
Press SET.
Use MULTI JOG. to set the correct minutes.
Sleep
the
Press CLOCK at any time
briefly
sleep
specify
time.
delay
for about 5 seconds. This
Adjustment
(
)
press the VOLUME
control.
(
or
before it turns off is
counterclockwise to
To check the
to increase the sound
)
stereo
can see
that the system
after 90 minutes.
means
level,
or
to decrease it on the remote
headphone plug ( 6.3mm)
headphone jack.
The speakers are automatically disconnected
you plug in the headphones (not supplied).
pressed the time interval
reduced by 10 minutes. i.e.
80...70... etc. Select the desired time to turn off.
remaining
time until the power is
turned off.
function is active press SLEEP
The time remaining until it turns off is
While the
sleep
briefly.
displayed
for about 5 seconds.
ote
Headphone Socket
a
automatically
before the power is
Each time the button is
VOLUME CONTROL KNOB clockwise to
Connect
the time
turned off, press SLEEP.
In the display window you
to see the
MULTI JOG.
timer is used, the power is automatically
turned off after the specified time has elapsed.
To
display.
by turning
Function
When the
on
the level
Press ENTER.
3
Press SET and the correct time is shown
DRAMA
When you select USER MODE, press the
ENTER button repeatedly.
cycle.
Press VOLUME
into the
when
If you press SLEEP while the
the SLEEP time is reset.
To cancel the
sleep
sleep
time is
displayed,
timer mode
If you wish to stop the function, press the SLEEP button
repeatedly until SLEEP 10 appears, and then press
SLEEP
8
T
(BASS, MIDDLE, TREBLE)
increase the sound level,
decrease it.
?
JAZZ
Press SET to confirm the selected hour
Volume
?
T
USER MODE
t
turns off
?Turn
SALSA
T
r
You
4
changes
r
or 12 hour
or
the
and hold
MULTI JOG..
(12HR)
3
on
panel.
-
24 hour
PATT.
Each time you press the button the indication
as follows.
Press CLOCK.
(If
activate stereo sound
front
the CLOCK
Setting
?To
Quality Adjustment
once
again
while SLEEP 10 is
displayed.
Audio
Adjustment
MUTE
DISPLAY MODE
Press MUTE to mute your unit.
You can mute your unit in order, for
to answer
Whenever you press DISPLAY MODE (DISP. MODE),
you can enjoy the spectrum change with 6 types in the
display
display
the
telephone,
example,
"MUTE" indicator blinks in the
(LM-U1350/1050)
window.
window.
DIMMER
This function is darken the
SURROUND
To activate surround mode
?
Select
a
ROUND
desired surround mode
(SURR.)
button
on
the
by using the SURfront panel or on the
remote control.
?
Each you press the button the indication
as follows.
SURROUND OFF
VOCAL
T
t
THEATER
CINEMA
T
HALL
changes
t
T
EALAr
TUNNEL
r
CHURCH
DISCO
t
t
SURROUND OFF
display
window
by
half in
power-on status. Press DIMMER once, and the display
is darken, and if you press it once more, the display will
darken by half too. To cancel it press the button again.
DEMO
(LM-U1350/1050)
Press DEMO in power off state to demonstrate the
function in the display.
to cancel
it, press POWER
or
DEMO
During demonstration in power-on
it by using the other buttons.
OAO
(Orientation
again.
status you can cancel
Acoustic
Optimizer)
Press OAO to reinforce the bass sound. The "OAO"
XDSS
-
-
(Extreme Dynamic Sound System)
Press XDSS to reinforce treble, bass and surround effect.
Each you press the button the indication changes as
follows.
XDSS OFF
t
XDSS ON
lights and "OAO ON" passes by with the left
side from the right. To cancel, press OAO again than
"OAO OFF" passes by with the left side from the right.
indicator
XTS Pro
unique sound quality of the LG Technology creats
the optinum sound for you to play the prefect playback
of the original sound and to feel the living sound source.
The
Each time you press XTS Pro the
the following order.
XTS-P ON
t
setting changes
XTS-P OFF
ote
The XTS pro function will not be
earphone has connected.
MP3
operated
when
an
Optimizer
This function is
Improve
optimizered
for
compressible
MP3 file.
the bass sound to make swweet sound.
Each time you press MP3 OPTIMZER the
changes in the following order.
setting
MP3OPTONt MP3OPTOFF
9
in
BEFORPATIN
Audio
Adjustment
Timer Function
set the clock function in power on/off state.
With the TIMER function you can have the radio
The unit
can
reception and recording, CD play, tape play, USB
Device play or turned on and off at the time desired.
setting mode.
TUNER-CD-TAPE-USB(LM-U1350/1050/550)
flashes in the display window in turn.
memorized TIMER
previous
press and hold the TIMER button
seconds.
setting,
The
previous
memorized timer
indicators appear in the
3
4
on
more
than 2
time and TIMER
display.
Press SET to confirm the minute to switch
8
blinking.
a.
When you select the TUNER function,
'PLAY' and 'REC' indicator blink in
the
window
display
alternately
Set the hour to switch off
for
Press SET to confirm the hour to switch off.
10
11
Set the minute to switch off
12
13
Press SET.
b.
the volume level
MULTI JOG.
Adjust
-
display
window and then
disappears.
2. When you select the CD or TAPE function,
'ON TIME' indicator appears for about 0.5
Press SET.
""
appears in the display window and the
timer setting has been completed.
Switch the system off.
The selected function is
15
automatically
switched
and off at the time set.
To cancel
display
or
check the timer
Each time the TIMER button is
the timer set
setting
or
cancel. You
can
you can select
also check the timer
pressed
status.
To activate
or
check the timer, press the TIMER
"
"
appears in the display window.
To cancel the TIMER, press the TIMER button so that
button
""
-
seconds in the
by turning
TUNER
number with MULTI JOG. and press SET.
'ON TIME' indicator appears for about 0.5
seconds in the
by turning
MULTI JOG.
on
play only
'REC' indicator : TUNER play and
recording
Select the previous memorized preset
:
by turning
MULTI JOG.
about 3 seconds.
'PLAY' indicator
on.
'OFF TIME' indicator appears for about 0.5
seconds in the display window and then
14
Press SET when the desired function is
1.
by turning
MULTI JOG.
9
Press TIMER to enter the timer
For your reference
If you want to correct the
on
disappears.
For your reference
If you don't set clock, timer function doesn't work.
-
7
Press CLOCK to check the current time.
1
2
Set the minute to switch
so
that
disappears
in the
display
window.
window and then
disappears.
5
6
Set the hour to switch
2
by turning
MULTI JOG.
Press SET to confirm the hour to switch
Auxiliary
1
on
Connect
rear
Function
auxiliary device i.e. TV
mounted AUX phone sockets.
an
Press FUNCTION
on
or
VCR to the
the remote control.
Each time you press the button the indication
changes as follows.
FMtAMtCDtAUX
10
on.
ote
You
can
also record from the
Recording Section.
auxiliary input
source, see
RDS Function
OPTIONAL
-
About RDS
Programme Search (PTY)
equipped with RDS (Radio Data System),
which brings a wide range of information from FM radio.
RDS is a system for transmitting station call signs or
network information, a description of station programme
type text message about the station or specifics of musi-
ability to encode broadcasts with Programme Type (PTY) codes that indicate
the type of material being broadcast. The following list
This unit is
Amajor
benefit of RDS is its
shows the abbreviations used to indicate each PTY
along
with
an
explanation
BEFORPATIN
of the PTY.
cal selection and the correct time.
RDS
Tuning
containing RDS data is tuned in,
the unit will automatically display the station's call sign
and the RDS indicator will light in the Display Window
as well as indicators for the programme type recognition
(PTY), Radio Text (RT), Clock Time (CT) and RDS
services programme (PS) if transmitted by the station.
When
RDS
a
FM station
Display Options
The RDS system is capable of transmitting a wide
variety of information in addition to the initial call sign
station is first tuned. In normal
that appears when
RDS operation the
display
broadcast network
or
front
a
will indicate the station name,
Pressing RDS on the
cycle through the various
call letters.
enables you to
data types in the sequence:
panel
PTY
RT
CT
(FREQUENCY
PS)
PTY (Programme type recognition)- The programme type is shown on the display window.
RT (Radio text recognition)- The radio station's
name is displayed on the display window.
CT (Time controlled by the channel)- Enable the
unit to receive the actual time and show it
on
the
display window.
PS (Programme Service name)- The programme
title is displayed on the display window.
otes
Some RDS stations may not choose to include some
of these additional features. If the data required for
the selected mode is not
being transmitted, the
show a PTY NONE, RT NONE,
Display Window will
CT NONE, PS NONE
You may search for a specific
by following these steps:
1
message.
2
Press TUNER
Select
a
.m
Programme Type (PTY)
(or FUNCTION)
desired station
to select FM mode.
by pressing
/M > buttons.
When the RDS transmission is received, the
display shows the program service name (PS) after
RDS indicator appears.
3
4
Press the RDS to select PTY mode.
different PTY, press the PRESET
UP/DOWN buttons while the last PTY in use is
To search for
still
displayed
a
to scroll
through
the list of
available PTY types.
5
When the PTY is selected, press the .m
/M > within 5 seconds.
The unit will go into an automatic search mode and
attempt to find the next station with acceptable
signal strength
that matches the desired PTY type.
11
Presetting
You
the radio stations
preset 50 stations for FM and AM. Before
can
make
5
that you have turned down the
volume to the minimum.
tuning,
sure
Press TUNER
(or FUNCTION) to select
frequency (AM or FM) you want.
Every time you press this button, AM and
changes alternately.
FM
on
the front
panel.
The station is stored.
2 to 5 to store other stations.
Repeat steps
6
the
To clear all the memorized stations
Press and hold PROG./MEMO.
the front
panel
on the display
on
for about two seconds, "CLEAR" appears
window and then press CLEAR, the stations
Press .m/M > buttons on the front
panel until the frequency indication starts to
2
Press PROG./MEMO.
are
cleared.
change.
For your reference
If all stations have already been entered, FULL message
will appear in the display window for a moment and then
otes
Automatic
Tuning
preset number will blink. To change the preset number,
follow the steps 4-5.
a
Press the .m/M > buttons.
-
Scanning stops
Manual
when the unit tunes in
a
station.
Tuning
To recall
Use the MULTI JOG.
3
Press PROG./MEMO.
A
on
the front
preset number will flash in the
Press and hold PRESET buttons
panel
display window.
.
on
the remote
or
appears
4
Press PRESET+/- buttons
on
the remote
control)
presets
(or PRESET (
to select the
/
control) until the
press it repeatedly.
(or PRESET (
/
)
desired preset number
)
preset
number you want.
Listening
1
to the radio
To turn off the radio
Press .m/M > (or FUNCTION) to
select the frequency (AM or FM) you want.
Every time you press
changes alternately.
Press POWER to turn the unit off
this button, AM and FM
function mode
The last received station is tuned in.
(CD,
TAPE
For your reference
If an FM program is
?
2
Press PRESET+/- buttons
on
the remote
(or PRESET ( /
control) repeatedly to select
preset station you
-
3
by rotating VOLUME
CONTROL KNOB (or pressing VOLUME
/
on the remote control) repeatedly.
()
?
Use manual
non-preset
or
automatic
radio stations
tuning
in
step
tuning, press and hold
.m/M > buttons on the front
2.
For automatic
panel.
so
select another
AUX).
noisy
that "STEREO"
disappears
on
display window. There will be no stereo effect,
the reception will be improved. Press MODE/RIF
again to restore the stereo effect.
the
want.
the volume
To listen to
?
the
Each time you press the button, the unit tunes in
one preset station at a time.
Adjust
Press MODE/RIF
)
or
or
?
but
To
improve reception
Repose the supplied antennas.
otes
Use MODE/RIF
switch to
mono
(Radio Interference Filter) function
reception if stereo reception is
distorted
When
by noise.
recording the MW(AM) broadcast,
to
beat noises
may occur. If it does, press MODE/RIF once.
When listening the MW(AM) broadcast, beat noises
may occur. If it does, press AM-NOISE once.
Each time you press AM-NOISE the setting changes
in the following order.
AM NOISE ON
12
t
AM NOISE OFF
Tape Playback
Basic
To
Playback
Press TAPE 1/2 to select TAPE 1
1
TAPE" appears in the
("NO
2
3
4
Open
Z
Press
STOP(x)/CLEAR
STOP(x) on the remote
TAPE 2.
or
display window.)
To
cassette TAPE 1
(or 2) by pushing
PUSH EJECT position.
Insert
one or two cassette
with the
Press PLAY
(B
(or 2).
AUTO STOP DECK
panel or TAPE
during playback.
the front
control
or
Fast Forward
.m/M > on the front panel
the remote control during playback,
pressing
m/M on
press PLAY
(B)
at the
point you
or
want.
This function shows how to record from tape to tape.
Press TAPE 1/ 2.
1
(TAPE 1/2)
plays only
on
Dubbing
b:OPTIONAL ).
or
After auto stop deck
to
Rewind
Play
After
tape side
the bottom and then close the TAPE 1
Stop Play
?
front side, the unit stops
?
Cassette TAPE 1- Insert
a
playback tape
Cassette TAPE 2- Insert
a
blank tape.
to dub.
automatically.
AUTO REVERSE DECK
You
can
(TAPE 2):OPTIONAL
select direction of the cassette you want
pressing
by
Press NOR-/ HI-DUBB.
2
Pressing
PLAY MODE.
Pressing
After the cassette
Once
OR
plays front
reverse(backward play) side,
stops automatically.
or
DUBB.
DUBB.
NOR DUBB
HI-
HI-SP. DUBB.
DUBB.
HI DUBB
To stop
Function
Normal
speed
dubbing
(LM-U1350/1050)
(LM-W550/U550)
Double
speed
dubbing
(LM-U1350/1050)
(LM-W550/U550)
recording, press STOP(x).
After the cassette
Twice
OR
reverse
plays front and
side, stops automatically.
follow.
Display
NORFunction
Display
as
After the cassette
Three
OR
times
six times
plays
repeatedly front and
stops automatically.
reverse
ote
?
The USB device
opening
side,
USB ports may be damaged if
the tape-door when the USB device is conor
nected.
Recording
Wind the tape to the
Basic
1
2
point recording
starts. Use
only
normal tapes. You
To
Setting
Press CD
or
TUNER
(or TUNER/BAND), USB.
the cassette TAPE 2 and insert
cassette into the cassette
Set the
recording
blank
compartment.
direction
Press PLAY MODE
a
:
repeatedly
Press TAPE
complete CD
and
a
cassette.
1
recording
or
2
Press z REC/X on the front panel.
"REC" blinks and holds the cassette in pause
mode.
Press
The
the front
PLAY(B)
recording begins.
To Pause
on
synchro recording function dubs
programmed titles automatically into
Press CD SYNC. in stop mode.
"REC" blinks and CD SYNC. is lit
on
the
display
The
synchronized recording is started
automatically after about 7 seconds.
ote
?
If you wish to record the desired track, select the
desired track with .m/M > before
commencing CD synchro recording.
panel.
recording
To pause the recording, press z REC/X
or z/X on the remote control again.
"REC" blinks
Tape Synchronized Recording
window.
Recording from Radio, CD, USB
Auxiliary source
2
STOP(x).
a
direction.
1
only.
The CD
OPTIONAL
to set the
record from cassette deck 2
Stop recording
CD to
Open
can
on
the
display
on
front
panel
window.
13
OPERATION
CD
Playback
Basic
Playback
1
Press
1
To Search
STANDBY/ON to turn
on
the unit.
After
pressing
the remote
on
at the
2
3
Press the CD button
on
the front
is
displayed.
and
(Z OPEN)
place
the disc
into the disc tray.
the left
on
is
(DISC 1)
played
This function is not available to
?
Press DISC SKIP
With the label side up
ote
8cm(3 inch) disc, put
Press CD OPEN
disc
a
the front
on
it onto the inner circle
(Z OPEN)
tracks and the
directly
time
are
Replace discs during Playback
You
can
discs without
1
2
dis-
Press the CD OPEN
(Z OPEN)
The disc tray is opened. Two disc compartments
appear. Even if the unit is playing a disc, it doesn't
stop playing.
discs in the compartments with
Replace
new
ones.
the disc in the left compartment
after the current disc, and then the one in the right
plays
compartment.
3
PLAY(B) on the front panel or CD PLAY/
PAUSE (B/X) on the remote control.
In addition, you can also play an Audio CD or MP3
CD using the NUMBER buttons.
Press
Press CD OPEN
(Z OPEN).
The CD door is closed.
otes
?
Play
Do not
tray
panel or CD PLAY/
PAUSE (B/X) on the remote control during playback.
Press this button again it to resume play.
on
during playing a disc to
played next and replace
interrupting playback of the current disc.
The unit
displayed.
(CDX)
or
open the disc tray
check what discs are to be
MP3 CD: "READING" appears in the display
window, and then the total number of files
Press CD PAUSE
during playing
To
played.
To Pause
DISC 3
or
When you press DISC 1-3 before playing a disc, the unit
will automatically start playing the selected disc.
to close the disc
playing
the
on
stopping.
Audio CD: "READING" appears in the display
window, and then the total number of
5
MP3 file.
To Select
compartment.
is
a
remote control
of the tray.
4
play
panel or D.SKIP
during playing or stopping.
first.
DISC 1
an
release
want.
point you
Press DISC 1, DISC 2
To load
button
To Go to the next discs
Press CD OPEN
The disc
holding .m/M >
control during playback, then
otes
disc is entered in the disc tray, the "NO DISC"
no
and
to enter
panel
the CD mode.
If
Track
a
the front
?
place
more
compact disc
one
on one
disc
at the same time.
the disc tray to close CD door,
the unit.
Do not
may
than
push
damage
as
you
To check MP3 file information
To
Stop Play
Press the INFO button
Press
STOP(x)/CLEAR
STOP(x) on the remote
on
the front
control
CD
panel
during playback.
or
-
will be shown in
-
To
?
?
Skip
a
Track
Press M > button to go to the next track.
When .m button is pressed once midway
through
a
track, the player
that track. When it is
skipped
each time
returns to the start of
pressed again, a track
the button is pressed.
The information
MP3 file
(Title, Artist or Album)
the display window.
playback.
of the MP3 file
the information of the MP3 file, "NO ID3
TAG" indicator will be shown in the display window.
If there is
no
otes
?
is
This unit
can
audio titles
?
play
The MP3 file
a
CD-R
or
CD-RW that contains
MP3 files.
or
name
using English.
14
during
and ID3 TAG should be named
CD
Playback
To
Repeat Play
To
play
one
Press REPEAT
"
once
1" appears
-
To
play
one
Press REPEAT
"
on
during playback.
the
disc
display
To
play
"
To cancel
can
window.
on
once more
display
the
PROGRAM/MEMO
display
window.
2
Press REPEAT several times until repeat indicator
Press REPEAT
once
1" appears on the
(One track repeat)
Press REPEAT
(All
on
the front
panel
or
the remote control in the
on
Press DISC SKIP
(DISC1/2/3)
on
or
DISC DIRECT PLAY
the front
panel
or
D.SKIP
the
on
3
program
display
again during
ALL DISC" appears
program
Press CD SKIP/ SEARCH .m/M >
the front
panel
or on
on
the remote control to
select the track.
during
-"
-"
contain up
repeat play
Program repeat play
?
can
remote control to select the disc.
disappears.
?
the discs and
stop mode.
repeatedly
during playback.
on
Press PROG./MEMO.
1
window.
all discs
on
to 20 tracks.
again during playback.
ALL DISC" appears
-
You
repeatedly
all tracks
Press REPEAT
Program Play
arrange the order of the tracks
create your own program. The program
repeatedly
1 DISC" appears on the
-
-
track
To
on
play.
4
window.
program
the
Press PROG./MEMO.
PROGRAM/MEMO
play.
display
5
window.
repeat)
6
Repeat steps
on
the front
panel
or
the remote control.
on
1~4.
PLAY(B) on the front panel or CD
PAUSE (B/X) on the remote control.
Press
PLAY/
To check program contents
Press PROG./MEMO.
remote
-
control)
in the
(or PROGRAM/MEMO
on
the
stop mode.
The disc, track and program number will be
displayed.
To clear program contents
Press PROG./MEMO.
remote
CLEAR
on
the
the stop mode. And then press
the front panel or CD STOP(x) on the
control)
on
(or PROGRAM/MEMO
on
remote control.
To add program contents
1.
Press PROG./MEMO.
remote
(or PROGRAM/MEMO on
control) repeatedly in the program stop
the
mode until "Disc Number" blinks.
2.
Repeat steps
To
modify program
1.
Press the PROG./MEMO.
2~4.
the remote
want to
2.
control)
modify.
Repeat steps
contents
to
(or PROGRAM/MEMO on
display program number you
2~4.
15
OPERATION
USB port
Connecting
LM-U1350/1050/550
Readable Card
SmartMedia
-
-
Card(SMC)
Compact Flash Card(CFC)
Micro Drive(MD)
Secure Digital Card(SD)
Multi Media Card(MMC)
Memory Stick(MS)
Memory Stick Pro(MS-Pro)
Compatable with : FAT12,16,32
Only use the memory cards
recommended
1
Plug
?
the USB device into the USB port of your
the USB
unit.
?
2
Press USB button
on
the front
panel.
?
?
?
otes
?
Don't
remove a
playing
MP3
1
player
or
memory card while
?
the USB.
USB device
Basic
on
the front
panel
to
enter the USB mode.
"CHECKING" appears in the display window, and
then the total number of files is displayed.
PAUSE
(
)
)
on
the front
panel
or
CD PLAY/
PLAY/ PAUSE
(
?
To
maximum 999 EA.
to save file in the memory card after
sure
cladding hard disk is supported.
The MP3 player requiring installation
supported.
of
There may be memory and card not be
depending on the type of memory card.
Skip
formatting.
a
drive is not
recognized
panel or D.SKIP
during playing or stopping.
the front
on
Track
a
a
track, the player
that track. When it is
skipped
returns to the start of
pressed again,
each time the button is
Press the INFO button
-
The information
will be shown in
it to resume
play.
-
Stop Play
STOP(x)/CLEAR on the front panel or CD
STOP(x) on the remote control during playback.
a
track is
pressed.
during
MP3 file
(Title, Artist or Album)
the display window.
playback.
of the MP3 file
the information of the MP3 file, "NO ID3
TAG" indicator will be shown in the display window.
If there is
no
otes
Press
?
This unit
can
play USB
device that contains
MP3/WMA files.
?
The MP3 file
name
and ID3 TAG should be named
using English.
?
?
16
the
To check MP3 file information
(CD ) on the front panel or CD
) on the remote control during
again
on
Press M > button to go to the next track.
When .m button is pressed once midway
through
playback.
Press this button
are
No
To
on
Play
Press CD PAUSE
Be
remote control
the remote control.
In addition, you can also play using the NUMBER
buttons.
To Pause
a
Numbers of file available
Press DISC SKIP
?
2
by using
playing
To Go to the next cards
Press the USB button
PLAY(
the memory card when
multi card reader.
or remove
Playback
Playback
Press
Don't add
This
player
can
not format memory card.
This
player
can
not use USB HUB.
USB device
To
Repeat Play
To
play
one
Press REPEAT
"
To
play
one
Press REPEAT
"
once
on
during playback.
the
disc
display
To
play
"
To cancel
You
can
window.
on
once more
display
repeatedly
during playback.
on
the
display
window.
3
once
repeat indicator
-"
1" appears on the
(One track repeat)
?
Press REPEAT
-"
display
again during
ALL DISC" appears
program
program
repeat)
on
play.
the
contain up
6
play.
display window.(All
the front
panel
or
the remote control in the
Press DISC SKIP front
panel
or
D.SKIP
on
the
remote control to select the disc.
Press CD SKIP/ SEARCH .m/M >
the front
panel
or on
PROGRAM/MEMO
5
window.
program
on
on
Press PROG./MEMO.
4
during
can
on
the remote control to
select the track.
Program repeat play
Press REPEAT
PROGRAM/MEMO
2
disappears.
?
the discs and
stop mode.
repeat play
Press REPEAT several times until
Press PROG./MEMO.
1
window.
all discs
on
to 20 tracks.
again during playback.
ALL DISC" appears
-
Program Play
repeatedly
all tracks
Press REPEAT
To
arrange the order of the tracks
create your own program. The program
repeatedly
1 DISC" appears on the
-
-
track
1" appears
-
Playback
Repeat steps
on
the front
panel
or
the remote control.
on
1~4.
PLAY(B) on the front panel or CD
PAUSE (B/X) on the remote control.
Press
PLAY/
To check program contents
Press PROG./MEMO.
remote
-
control)
in the
(or PROGRAM/MEMO
on
the
stop mode.
The disc, track and program number will be
displayed.
To clear program contents
Press PROG./MEMO.
remote
CLEAR
on
the
the stop mode. And then press
the front panel or CD STOP(x) on the
control)
on
(or PROGRAM/MEMO
on
remote control.
To add program contents
1.
Press PROG./MEMO.
remote
(or PROGRAM/MEMO on the
control) repeatedly in the program stop mode
until "Track Number" blinks.
2.
Repeat steps
To
modify program
1.
Press the PROG./MEMO.
2~4.
the remote
want to
2.
control)
modify.
Repeat steps
contents
to
(or PROGRAM/MEMO on
display program number you
2~4.
17
OPERATION
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
contacting
service.
Correction
Cause
Symptom
No power.
The power cord is disconnected.
?
No sound.
The audio cables
?
are
Plug the power
securely.
?
?Connect
not connected
securely.
The
?
speaker
to the wrong
The unit does not start
No disc
?
playback.
An
?
or
source
?T
equip-
jacks
cable is set
unplayable
or
connected with
speaker cable to the correct
position, then turn on the unit again by
pressing POWER.
?
tape is inserted.
placed upside
equipment
Set the
?
position.
disc
the
urn on
the audio cable.
tape is inserted.
The disc is
?
the audio cable into the
securely.
The power of the external
ment is switched off.
?
cord into the wall outlet
?
down.
Insert
a
disc disc
or
Insert
a
playable
disc
tape.
Place the disc with the
?
tape.
or
playback
side
down.
?T he disc is not
placed
within the
guide.
Place the disc
?
inside the
The disc is
?
pointed
at the
sensor
The remote control is too far from the
?
There is
an
obstacle in the
of the
path
guide.
of the unit.
Operate the
23ft(7m).
?
unit.
?
correctly
Point the remote control at the remote
?
remote sensor of the unit.
properly.
the disc tray
Clean the disc.
?
?T he remote control is not
The remote control
does not work
dirty.
on
remote control within about
Remove the obstacle.
?
remote control and the unit.
The batteries in the remote control
?
Replace
?
are
the batteries with
new ones.
exhausted.
Additional Information
5.
About MP3
?
?
An WMA file is
1.
2.
3.
4.
a
nology.
WMA(Windows
compression of
as
Microsoft audio
Media
Audio)
compression
tech-
offers double the audio
the MP3 format.
compatibility
with this unit is limited
follows:
/ 8
48kHz
32
44.1
Sampling Frequency
(MP3),
kHz (WMA)
Bit rate / 8 320kbps (MP3), 32
128kbps (WMA)
CD-R physical format should be "ISO 9660"
If you record MP3/WMA files using the software
which cannot create a FILE SYSTEM, for example
"Direct-CD" etc., it is impossible to playback MP3
files. We recommend that you use "Easy-CD
-
Creator", which
18
or
or
30 letters
or
less
"wma" extension
"********.WMA".
6.
Donotusespecialletterssuchas"/:*?"<>"etc.
7.
Even if the total number of files
more
-
MP3/WMA Disc
incorporate ".mp3"
using
than 1000, it will
only
on
the disc have
be shown up to 999.
About MULTI SESSION
About WMA
?
should be named
e.g. "********.MP3"
file extension.
?
names
and must
An MP3 file is audio data
compressed by using the
MPEG1 audio layer-3 file-coding scheme. We call files
that have the ".mp3" file extension "MP3 files".
The unit can not read an MP3 file that has not ".mp3"
File
-
-
-
creates an ISO9660 file
system.
This function
recognizes
to a disc of CD-ROM
ex)
If there
are
If there
are
the multi session disc
according
type.
MP3/WMA files in the first session, the
MP3/WMA file in the first session is only played.
only
MP3/WMA files in the whole
ses-
sion, all of the MP3/WMA files in the session are
played. If there is Audio CD in the first session,
only
the Audio CD in the first session is
played.
Specifications
MODEL
SECTION
[Genral]
Refer to the back
Power
consumption
External dimensions
FM
AM
supply
Mass
[CD]
[Tuner]
Power
LM-U1350A/D/X
(MW)
[Amp]
[TAPE]
H
45W
6.3
6.3
6.3
Frequency response
Signal-to-noise ratio
Dynamic range
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Tuning Range
Intermediate Frequency
Signal to Noise Ratio
Frequency Response
Output Power
18000 Hz
T.H.D
0.5 %
Frequency Response
Signal-to-noise ratio
Tape Speed
42
Wow Flutter
0.25
F.F/REW Time
120
Frequency Response
Signal to Noise Ratio
Channel Separation
125
40 dB
Erase Ratio
55
D)
-
326
kg
40
x
of the unit.
50W
x
x
panel
60W
273
(W
LM-U1050A/D/X
x
366
Designs
87.5
108.0 MHz
-
or
65
-
74
MHz, 87.5
-
108.0 MHz
10.7 MHz
60/55 dB
60
10000 Hz
-
522-1620kHzor520-1720kHz
450 kHz
35 dB
120
2000 Hz
-
130W+130W
100W+100W
50W+50W
20000 Hz
-
75 dB
4.75 cm/sec
%(MTT -111, JIS-WTD)
sec (C-60)
8000Hz
-
dB(P/B) / 45 dB(R/P)
dB(MTT-5511)
50
3
Way
3
Speaker
LMS-U1050
3
Way
4Ω
50
-
Input Power
Max. Input Power
NetDimensions(WxHxD)
Net Weight
subject
(1m)
2
Way
55
-
Speaker
8Ω
20000 Hz
85 dB/W
2
(1m)
56
-
20000 Hz
85 dB/W
(1m)
100 W
50W
260 W
200 W
100 W
5kg
change
Speaker
130 W
227X327X312mm
to
3
LMS-W550/U550
4Ω
20000 Hz
86 dB/W
Rated
are
REF NC
70 dB
Sound Pressure Level
specifications
kg
70 dB
Type
Impedance
Frequency Response
and
kg
mm
LMS-U1350
[Speakrs]
LM-W550A/D/X
LM-U550A/D/X
227X327X272mm199X326X232mm
4.2
kg
2.78
kg
without notice.
19
P/NO
:
3834RH0130B
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising