LG | T2402SGPW | LG T2402SGPW Owner’s Manual

LG(66) 설계 042 A3 (95.02.01) REV_1
RELEASING THIS DRAWING
WITHOUT PERMISSION LG
Electronics SHOULD BE
ACCUSED ACCORDING TO THE
LAWS AND COMPANY RULES.
MFL68881060
Work
WORK
이 도면은 LG전자의 자산으로 불법
유출시 관계법과 회사규정에 의해 처벌됨.
SEC.
60
가
BRAND
나
P/No.
PRINTING DEGREE
LG
SIGNATURE
MFL68881060
1
<FRONT>
MATERIAL AND PRINTING DESCRIPTION
LANGUAGE
PAGE
PRODUCT
외지: 아트지 150g OFFSET 인쇄
내지: 모조지 80g OFFSET 인쇄
English
44
W-MODULE
REMARK
LG SIGNATURE 24인치
양산처 : 국제인쇄
<BACK>
작업 주기
1. 재질 : 작업표에 준함.
2. 인쇄방법 : 작업표에 준함.
3. 인쇄 내용, 문자의 크기, 선의 굵기 및 형상 등은 주어진 도면에 준한다.
4. 외곽 치수는 절단 후 치수임.
5. 양산 전 설계 한도를 득할 것.
210
6. 본 부품에 금지 물질이 포함되지 않도록 하고, 상세 내용은 LG(63)-A-5501-34를 만족할 것.
WORK SPECIFICATIONS
1. Material should be refer to work table.
2. Printing method should be refer to work table.
3. Printing contents, the size of text and font follow the LG Drawing.
4. There is the external dimension after cutting size.
5. Before product controlled by criteria sample.
148
148
6. Standard of supervision for hazardous material
The part should not contain prohibited substances and details should comply with LG standard of LG(63)-A-5501-34
PDF
ILLUSTRATOR
4
TRIG.
UNIT
mm SCALE N S
DESIGNED REVIEWED CHECKED APPROVED
3
2
1
REV. NO.
기호
유럽향 규격 문구 삭제.
단가 등록 위한 가도면 이후 매뉴얼 등록.
REVISION DESCRIPTION
변경 사항
EAGH300755 17.03.18 이승현 김영수
EAGH300249 17.03.08 이승현 김영수
REF. NO.
시방 번호
DATE
년/월/일
PREPARED APPROVED
시방자
승인자
김은지
17.02.20
최차림
17.02.20
LG 전자
(주)
LG Electronics Inc.
이승현
17.02.20
김영수
17.02.20
RELATED DWG.
T
I
T
L
E
DWG.
No.
DR COMPLETED
도면 DR 완료
완료일 :
Manual, Quick Guide
W-MODULE 1/1
MFL68881060
OWNER'S MANUAL
MINI WASHER
Before beginning installation, read these instructions
carefully. This will simplify installation and ensure that
the product is installed correctly and safely. Leave these
instructions near the product after installation for future
reference.
T2402SGPW
www.LGSIGNATURE.com
MFL68881060
Copyright © 2017 LG Electronics Inc. All Rights Reserved.
TABLE OF CONTENTS
This manual may contain images or
content different from the model you
purchased.
This manual is subject to revision by the
manufacturer.
SAFETY INSTRUCTIONS........................................................4
IMPORTANT SAFETY INSTRUCTIONS..................................................... 4
INSTALLATION.......................................................................10
Parts.......................................................................................................... 10
Accessories............................................................................................... 11
Specifications............................................................................................ 11
Installation Place Requirements................................................................ 12
Stacking Mini Washer................................................................................ 13
Connecting the Supply Hose..................................................................... 15
Installing the Drain Hose........................................................................... 17
Leveling the Appliance............................................................................... 18
OPERATION............................................................................20
Using the Application................................................................................. 20
Sorting Laundry......................................................................................... 21
Using the Door and Drawer....................................................................... 22
Adding Cleaning Products......................................................................... 23
Control Panel............................................................................................. 25
Programme Table...................................................................................... 27
Option Programme.................................................................................... 28
SMART FUNCTIONS..............................................................29
Using the Smart Diagnosis™ Function...................................................... 29
MAINTENANCE.......................................................................30
Cleaning the Washing Machine................................................................. 30
Cleaning the Drum..................................................................................... 31
Cleaning the Water Inlet Filter................................................................... 31
Cleaning the Lint Filter............................................................................... 32
Caution on Freezing During Winter........................................................... 32
TROUBLESHOOTING............................................................34
Diagnosing Problems................................................................................ 34
Error Messages......................................................................................... 38
Rev.00_032817
SAFETY INSTRUCTIONS
EN
The following safety guidelines are intended to prevent
unforeseen risks or damage from unsafe or incorrect operation
of the appliance.
The guidelines are separated into ‘WARNING’ and ‘CAUTION’
as described below.
This symbol is displayed to indicate matters and
operations that can cause risk. Read the part with this
symbol carefully and follow the instructions in order to
avoid risk.
WARNING
This indicates that the failure to follow the instructions can
cause serious injury or death.
CAUTION
This indicates that the failure to follow the instructions can
cause the minor injury or damage to the product.
IMPORTANT SAFETY INSTRUCTIONS
WARNING
To reduce the risk of explosion, fire, death, electric shock,
injury or scalding to persons when using this product, follow
basic precautions, including the following:
Children in the Household
This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure
that they do not play with the appliance.
4
EN
Installation
•Never
•
attempt to operate the appliance if it is damaged,
malfunctioning, partially disassembled, or has missing or broken
parts, including a damaged cord or plug.
•This
•
appliance should only be installed and transported by two or
more people holding the appliance securely.
•Do
• not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind, or
rain or temperatures below freezing.
•Tighten
•
the drain hose to avoid separation.
5
EN
•If
• the power cord is damaged or the hole of the socket outlet is
loose, do not use the power cord and contact an authorized service
centre.
•This
•
appliance must not be installed behind a lockable door, a
sliding door or a door with a hinge on the opposite side to that of
the appliance, in such a way that a full opening of the appliance
door is restricted.
•This
•
appliance must be grounded. In the event of malfunction or
breakdown, grounding will reduce the risk of electric shock by
providing a path of least resistance for electric current.
•This
•
appliance is equipped with a power cord having an equipmentgrounding conductor and a grounding power plug. The power plug
must be plugged into an appropriate socket outlet that is installed
and grounded in accordance with all local codes and ordinances.
•Improper
•
connection of the equipment-grounding conductor can
result in risk of electric shock. Check with a qualified electrician or
service personnel if you are in doubt as to whether the appliance is
properly grounded.
•Do
• not modify the power plug provided with the appliance. If it
does not fit the outlet, have a proper outlet installed by a qualified
electrician.
6
EN
Operation
•Do
• not use a sharp object like drill or pin to press or separate an
operation unit.
•Do
• not repair or replace any part of the appliance. All repairs
and servicing must be performed by qualified service personnel
unless specifically recommended in this Owner’s Manual. Use only
authorized factory parts.
•Use
•
new hose or hose-set supplied with the appliance. Reusing old
hoses can cause a water leak and subsequent property damage.
•Do
• not reach into the appliance if the tub or agitator is moving.
•Keep
•
the area underneath and around the appliance free of
combustible materials such as lint, paper, rags, chemicals, etc.
•Do
• not put animals, such as pets into the appliance.
•Do
• not leave the appliance door open. Children may hang on the
door or crawl inside the appliance, causing damage or injury.
•Never
•
reach into the appliance while it is operating. Wait until the
drum has completely stopped.
•Do
• not put in, wash or dry articles that have been cleaned in,
washed in, soaked in, or spotted with combustible or explosive
substances (such as wax, oil, paint, gasoline, degreasers,
drycleaning solvents, kerosene, vegetable oil, cooking oil, etc.).
Improper use can cause fire or explosion.
•In
• case of flood, disconnect the power plug and contact the LG
Electronics customer information centre.
•Do
• not push down the drawer excessively, when the appliance
drawer is open.
7
EN
•Do
• not touch the door during a high temperature programme.
•Do
• not use flammable gas and combustible substances (benzene,
gasoline, thinner, petroleum, alcohol, etc.) near the appliance.
•If
• the drain hose or inlet hose is frozen during winter, use it only
after thawing.
•Keep
•
all washing detergents, softener and bleach away from
children.
•Do
• not touch the power plug or the appliance controls with wet
hands.
•When
•
pulling out the power plug from an outlet, hold the power
plug, not the cable.
•Do
• not bend the power cable excessively or place a heavy object
on it.
•If
• there is a gas leakage (isobutane, propane, natural gas, etc.),
do not touch the appliance or power plug and ventilate the area
immediately.
•Do
• not operate Mini Washer with two or more Mini Washers
stacked.
•To
• avoid breaking the door glass, do not push too hard on the door
when closing.
•Do
• not step on Mini Washer.
•Do
• not wash rugs, mats, shoes or pet blankets, or any other items
other than clothes or sheets, in this machine.
•This
•
appliance must only be used for domestic household purposes
and should not be used in mobile applications.
•Do
• not open or close the door by foot.
8
EN
Maintenance
•Securely
•
plug the power plug in the socket outlet after completely
removing any moisture and dust.
•Disconnect
•
the power cord before cleaning the appliance.
•Never
•
unplug the appliance by pulling on the power cable. Always
grip the power plug firmly and pull straight out from the socket
outlet.
•Do
• not spray water inside or outside the appliance to clean it.
Disposal
•Before
•
discarding an old appliance, unplug it. Cut off the cable
directly behind the appliance to prevent misuse.
•Dispose
•
of all packaging materials (such as plastic bags and
styrofoam) away from children. The packaging materials can cause
suffocation.
•Remove
•
the door before disposing of or discarding this appliance to
avoid the danger of children or small animals getting trapped inside.
9
INSTALLATION
EN
Parts
6
7
3
1
2
4
5
11
10
9
8
1 Door
7 Power Plug
2 Drum
8 Water Drain Hose
3 Stacking Switch
9 Leveling Feet
4 Control Panel
10 Unlock Button
5 Drawer
11 Remote Sensor
6 Water Supply Hose
10
EN
Accessories
Water supply hose
(for cold water)
Connecting
supply hose
Water drain hose
Water supply hose
connector
Water drain hose
connector
Anti-slip sheets
(2 EA)
Detergent
measuring
cup
Brackets (front)
(2 EA)
Brackets (back)
(2 EA)
Spanner
* Screws
Type A (37 EA)
Type B (5 EA)
Type C (3 EA)
Cable ties
(2 EA)
Band clamp
Stacking holder
Remote control
* Type A : long sheet metal screw, Type B : short sheet metal screw, Type C : machine screw
NOTE
••Different accessories may apply to each model.
••The stacking holder is for preventing independent operation.
••Depending on the installation environment, you may have to purchase a separate drain hose
connector.
••In addition to the screws required for installation, extra screws have been provided.
Specifications
Power supply
Size
Product weight
Permissible water pressure
Wash capacity
220 - 240 V~, 50 Hz
600 mm (W) X 660 mm (D) X 365 mm(H)
43 kg
0.1 - 0.8 Mpa (1.0 - 8.0 kgf / cm²)
2 kg
••Appearance and specifications may change without notice to improve the quality of the product.
11
EN
Installation Place
Requirements
Location
135 cm
123 cm
0.5 cm
125 cm
2 cm
110 cm
*125 cm
10 cm
5 cm
60 cm
5 cm
*125 cm: minimum space for installation
Level floor : Allowable slope under the entire
appliance is 1°.
Power outlet : Must be within 1.5 meters of
either side of the location of the appliance.
Additional Clearance : 5 cm at the sides and 10
cm behind the unit.
••Do not place or store laundry products on top
of the appliance at any time. These products
may damage the finish or controls.
WARNING
••The plug must be plugged into an appropriate
outlet that is properly installed and grounded
in accordance with all local codes and
ordinances.
Positioning
••Install the appliance on a flat hard floor.
••Make sure that air circulation around the
appliance is not impeded by carpets, rugs, etc.
••Never try to correct any unevenness in the
floor with pieces of wood, cardboard or similar
materials under the appliance.
••If it is impossible to avoid positioning the
appliance next to a gas cooker or coal burning
stove, an insulation (85x60 cm) covered with
aluminum foil on the side facing the cooker
or stove must be inserted between the two
appliances.
12
••Do not install the appliance in rooms where
freezing temperatures may occur. Frozen
hoses may burst under pressure. The reliability
of the electronic control unit may be impaired
at temperatures below freezing point.
••Ensure that when the appliance is installed, it
is easily accessible for an engineer in the event
of a breakdown.
••With the appliance installed, adjust all four
feet using a transit bolt spanner to ensure
the appliance is stable, and a clearance of
approximately 5 mm is left between the top of
the appliance and the underside of any worktop.
••If the appliance is delivered in winter and
temperatures are below freezing, place the
appliance at room temperature for a few hours
before putting it into operation.
••Do not use a drip pan as it can block the
drawer. Using the drip pan may result in
increased vibration and noise during operation.
WARNING
••This appliance is not designed for maritime
use or for use in mobile installations such as
caravans, aircraft etc.
Electrical Connection
••Do not use an extension cord or double
adapter.
••Always unplug the appliance and turn off the
water supply after use.
••Connect the appliance to an earthed socket in
accordance with current wiring regulations.
••The appliance must be positioned so that the
plug is easily accessible.
••Repairs to the appliance must only be carried
out by qualified personnel. Repairs carried out
by inexperienced persons may cause injury
or serious malfunctioning. Contact your local
service centre.
EN
Stacking Mini Washer
2
Stacking holder
Brackets (front)
Assemble the bracket (front) and stacking
holder at the bottom of Main Washer.
••First assemble the stacking holder using
2 type A screws included in the accessory
box, then each bracket using 7 type A
screws included in the accessory box.
2
Brackets (back)
1
Brackets (front) Brackets (back) Stacking holder
3
NOTE
••The
error message appears on the
display, if the stacking holder is not attached to
the bottom of the Main Washer.
1
Tilt and hold Main Washer.
3
Pull and save the foam block for future use.
If Mini Washer must be moved in the future,
the foam block will help prevent damage to
Mini Washer during transportation.
NOTE
••To prevent damage, do not remove the
foam block until Mini Washer is at the final
location.
13
EN
4
Turn the top cover about 180 degrees.
Cover the upper hole with the top cover and
install 4 type B screws to fix it in place.
7
Securely attach the two appliances at the
corners using 14 type A screws.
••First, insert screws on each side. Then
insert screws on the front and back side.
NOTE
••It can be difficult to assemble if it is not
assembled in the proper order.
••Use two type C screws to assemble the
stacking holder.
5
Attach the two back brackets on the rear
top of the Mini Washer by inserting 4 type A
screws in each bracket.
Stacking holder
8
6
Place Main Washer on top of Mini Washer.
••Make sure the 4 legs are totally locked and
the holes of Mini Washer align with the
holes of Main Washer.
1
1
2
3
Turn the feet of Main Washer slightly until it
is snugged up against Mini Washer.
NOTE
••Mini Washer will not work as a standalone unit.
Washer leg
Washer leg
14
EN
Connecting the Supply Hose
••Water supply pressure must be between 0.1
MPa and 0.8 MPa (1.0‒8.0 kgf/cm2).
••Do not overtighten the water supply hose.
••If the water supply pressure is more than
0.8 MPa, a decompression device should be
installed.
••Periodically check the condition of the hose
and replace the hose if necessary.
••Contact the service centre if there is no rubber
seal.
Connecting Hose to Water Tap
Connecting Screw-Type Hose to Tap
with Thread
Screw the hose connector onto the water supply
tap.
Checking the Rubber Seal on the
Supply Hose
Two rubber seals are supplied with the water
supply hoses. They are used for preventing
water leaks. Make sure the connection to taps is
sufficiently tight.
Connecting Screw-Type Hose to Tap
Without Thread
1
Loose the four fixing screws.
Upper
connector
Hose connector
Rubber seal
Rubber
seal
Fixing screw
Hose connector
Rubber seal
2
Remove the guide plate if the tap is too large
to fit the adapter.
Guide plate
15
EN
3
Push the adapter onto the end of the tap
so that the rubber seal forms a watertight
connection. Tighten the four fixing screws.
2
Remove the guide plate if the tap is too large
to fit the adapter.
Guide plate
4
Push the supply hose vertically upwards
so that the rubber seal within the hose
can adhere completely to the tap and then
tighten it by screwing it to the right.
3
Push the adapter onto the end of the tap
so that the rubber seal forms a watertight
connection. Tighten the four fixing screws
and the adapter ring plate.
4
Pull the connector latch plate down, push the
supply hose onto the adapter, and release
the connector latch plate. Make sure the
adapter locks into place.
Plate
Supply
hose
Connecting One Touch Type Hose to
Tap Without Thread
1
Unscrew the adapter ring plate and loose the
four fixing screws.
Latch plate
Ring plate
NOTE
••After connecting the supply hose to the water
tap, turn on the water tap to flush out foreign
substances (dirt, sand, sawdust, and etc.)
in the water lines. Let the water drain into a
bucket, and check the water temperature.
16
EN
Connecting Hose to Two Washing
Machines
1
Connect the water supply hose connector
to the water supply hose of the front-loading
washing machine. Open the accessory
package for pedestal washing machine
installation.
Installing the Drain Hose
••The drain hose should not be placed higher
than 100 cm above the floor. Water in the
appliance may not drain or may drain slowly.
1
Insert the band clamp onto the drain hose
elbow.
Water supply hose connector
Band clamp
Press board
2
2
With the hose leading up from the elbow,
insert the elbow onto the drain outlet on the
back of Mini Washer.
3
Adjust the band clamp with pliers to keep the
hose securely in place and prevent leaking.
Connect the water supply hose of pedestal
washing machine to the water supply hose
connector, pedestal washing machine to be
installed.
Rubber packing
Rubber packing
3
Connect the additionally provided water
supply hose of the front-loading washing
machine to the water supply hose connector
and water tap.
Water supply hose connector
Band clamp
NOTE
••Make sure the water supply hoses are not
kinked or pinched.
17
EN
Using the Drain Hose Connector
Leveling the Appliance
1
Connect the drain hose of Main Washer and
Mini Washer to the drain connector.
2
Push the drain hoses firmly onto the drain
connector.
If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level (Use a spirit level).
••Once the appliance is level, tighten the lock
nuts up towards the base of the appliance. All
lock nuts must be tightened.
Drain hose
connector
Raise
Lower
Lock nut
Tighten all 4
lock nuts securely
CAUTION
••Make sure the drain hose is not kinked or
pinched. This is a potential cause of drainage
problems or noise.
NOTE
••Depending on the installation environment, you
may have to purchase a separate drain hose
connector.
Diagonal Check
••When pushing down the edges of the top plate
diagonally, the appliance should not move up
and down at all (check both directions). If the
appliance rocks when pushing the machine top
plate diagonally, adjust the feet again.
WARNING
••When stacking Main Washer on Mini Washer,
use the leveling feet on Mini Washer to level
both. Main Washer´s leveling feet should be
minimized and the locknuts turned counterclockwise to secure them.
NOTE
••Timber or suspended type flooring may
contribute to excessive vibration and
unbalance.
••If Mini Washer is installed on a raised platform,
it must be securely fastened in order to
eliminate the risk of falling off.
18
EN
Using Anti-Slip Sheets (Optional)
If you install the appliance on a slippery surface,
it may move because of excessive vibration.
Incorrect leveling may cause malfunction
through noise and vibration. If this occurs, install
the anti-slip sheets under the leveling feet and
adjust the level.
1
Clean the floor to attach the anti-slip sheets.
••Use a dry rag to remove and clean foreign
objects and moisture. If moisture remains,
the anti-slip sheets may slip.
2
Adjust the level after placing the appliance in
the installation area.
3
Place the adhesive side of the anti-slip
sheets on the floor.
••It is most effective to install the anti-slip
sheets under the front feet. If it is difficult to
place the pads under the front feet, place
them under the back feet.
This side up
Adhesive side
4
Ensure the appliance is level.
••Push or rock the top edges of the
appliance gently to make sure that the
appliance does not rock. If the appliance
rocks, level the appliance again.
NOTE
••You can obtain anti-slip sheets from the LG
Service Centre.
19
OPERATION
Using the Application
1
Sort laundry and load items.
••Sort laundry by fabric type, soil level,
colour and load size as needed. Open the
door and load items into Mini Washer.
2
Add cleaning products.
••Add the proper amount of detergent
with the detergent measuring cup to the
washing drum evenly.
3
Close the door and drawer.
4
Turn on Main Washer.
••Press the Power button to turn on the Main
Washer.
20
EN
5
Select Mini Washer on the quick circle
display of Main Washer, then Choose the
desired washing programme.
••The options are selected by default
functions automatically. When you want
to change the options, press the options
button.
6
Begin cycle.
••Press the Start/Pause button to begin
the cycle. Mini Washer will agitate briefly
without water to measure the weight of the
load.
7
Add softener.
••Press the Start/Pause button or Unlock
button on the right side in Mini Washer.
••The fabric softener can be added within 30
seconds after the signal sounded.
••Open the drawer and door and add the
softener.
••Close the door and drawer and press the
Start/Pause button to start the appliance
again.
8
End of cycle.
••When the cycle is finished, a melody will
sound. Immediately remove your clothing
from Mini Washer to remove wrinkling and
odors.
••After washing is complete, wipe off Mini
Washer door, gasket and inside the
washing drum with dry towel for clean
washing.
EN
Sorting Laundry
1
3
Look for a care label on your clothes.
••This will tell you about the fabric content
of your garment and how it should be
washed.
••Symbols on the care labels.
Wash temperature
Caring before loading.
••Do not wash 'memory wire' on female
inner wear (such as a brassiere) as it may
damage other clothes or the washing
machine and create noise.
••Check all pockets to make sure that
they are empty. Items such as nails, hair
clips, matches, pens, coins and keys can
damage both your washing machine and
your clothes.
Normal machine wash
Permanent press
Delicate
Hand wash
Do not wash
2
Sorting laundry.
••To get the best results, sort clothes into
loads that can be washed with the same
wash cycle.
••Different fabrics need to be washed at
varying temperatures and spin speeds.
••Wash two or more towels or knits together.
If washed separately, laundry which
absorbs a lot of water may not be washed
well or abnormal spin-drying may occur
due to leaning.
••Always sort dark colours from pale
colours and whites. Wash separately as
dye and lint transfer can occur causing
discolouration of white and pale garments.
If possible, do not wash heavily soiled
items with lightly soiled ones.
••Close zippers, hooks and strings to make
sure that these items don’t snag on other
clothes.
••Pre-treat dirt and stains by brushing a
small amount of detergent dissolved water
onto stains to help lift dirt.
••If an item of clothing has a long lace
attached to it, arrange the lace so it cannot
be tangled or put it into a washing net.
••Remove the insides of cushions, pillows,
or sitting mats and only wash the cover.
The insides may protrude, damaging
other laundry. Plastic parts may generate
abnormal vibrations.
CAUTION
••Divide laundry in large volume for washing
so that the laundry can be submerged under
water completely. If laundry expands during
washing, it may cause damage to the laundry
and parts during washing or spin.
−−Soil (Heavy, Normal, Light) :
Separate clothes according to amount of
soil.
−−Colour (White, Lights, Darks):
Separate white fabrics from coloured
fabrics.
−−Lint (Lint producers, Collectors):
Wash lint producers and lint collectors
separately.
21
EN
Using the Door and Drawer
Opening the Door and Drawer
1
Push the O marked and pull out the drawer
until it is fully extended.
CAUTION
••Do not let your hands get stuck between the
door and Mini washer, as this can cause injury.
••Forcing the drawer or the door to open can
cause part damages and safety problems.
••Closing the drawer before having closed the
door completely may scratch the door glass.
••Ensure the drawer is pulled out completely to
prevent the door from contacting Main Washer.
NOTE
2
Push the O marked down on the door until
it clicks.
Closing the Door and Drawer
1
Push the O marked down on the door until
it clicks.
2
Push the drawer completely closed.
22
••Door lock may fail if there is too much laundry
in the machine or if the door is not completely
closed.
••If the product is operating or the drawer lock
, indicator is displayed, the door cannot open.
To open the door, press the Start/Pause button
to stop the product, and when drawer lock
, indicator disappears, open the door. Do not
force the drawer and door open.
••If
,
,
or a warning sign appears
on the display, close the drawer and the door
completely. After doing so, press the Start/
Pause button.
••If the drawer cannot be opened completely, pull
the drawer forward with a little force using both
hands.
••If power failure occurs during product
operation, the door cannot be opened. Provide
the power again or contact the LG service
centre.
••If the door cannot open due to high
temperature, carry out rinsing with cold water
using the Rinse+Spin programme or wait a
while before opening the door.
EN
Adding Cleaning Products
Adding Detergent
Detergent Dosage
Measure the detergent with the detergent
dispenser and pour it into the tub.
••Detergent should be used according to the
instruction of the detergent manufacturer and
selected according to type, colour, soiling of
the fabric and washing temperature.
••If too much detergent is used, too many suds
can occur and this will result in poor washing
results or cause heavy load to the motor.
••If you wish to use liquid detergent follow
the guidelines provided by the detergent
manufacturer.
••If too many suds occur, reduce the detergent
amount.
••Detergent usage may need to be adjusted for
water temperature, water hardness, size and
soil level of the load. For best results, avoid
oversudsing.
••Refer to the label of the clothes, before
choosing the detergent and water temperature.
••When using the washing machine, use
designated detergent for each type of clothing
only:
−−General powdered detergents for all types of
fabric
−−Powdered detergents for delicate fabric
−−Liquid detergents for all types of fabric or
designated detergents only for wool
••For better washing performance and whitening,
use detergent with the general powdered
bleach.
••Use the provided detergent measuring cup to
add only one cup of detergent.
••Reduce the amount of detergent for lightly
soiled laundry. If you use too much detergent,
excessive bubbles will remain after rinsing.
23
EN
Adding Softeners
Adding Fabric Softener
CASE 1. When the machine chimes:
1
Press Start/Pause to pause the cycle.
••It can be paused by pressing the button on
the right side of Mini Washer or by using
the remote control.
2
Slide open the drawer, open the door, and
add the liquid fabric softener.
3
Close the door, slide the drawer closed, and
press Start/Pause to restart the cycle.
NOTE
••To disable or enable the fabric softener alert,
press and hold the Rinse+Spin and Rinse+
button for three seconds.
••The fabric softener can be added within 30
seconds after the signal sounded.
CASE 2. If you miss the softener add point:
1
Press the Power button to interrupt the
cycle.
2
Slide open the drawer, open the door, and
add the liquid fabric softener.
3
Close the door, Slide the drawer, and select
the Rinse+Spin programme.
4
Press the Start/Pause to restart the cycle.
NOTE
••Do not pour fabric softener directly on the
clothes.
••The softener can also be diluted with water
and added directly into the drum. Do not
pour undiluted softener directly onto clothing
because it may stain fabrics.
24
Adding Water Softener
••A water softener, such as anti-limescale (e.g.
Calgon) can be used to cut down on the use
of detergent in extremely hard water areas.
Dispense according to the amount specified
on the packaging. First add detergent and then
the water softener.
••Use the quantity of detergent required for soft
water.
CAUTION
••Do not directly put bleach to the laundry. This
may cause partial discoloration and severe
damage to the laundry.
••Do not use chlorine bleach or acidic cleaner
when washing the laundry, as it can cause
damage to clothes such as discoloration and
decoloration of laundry.
EN
Control Panel
You can operate the machine by selecting from the control panel on Main Washer, Mini Washer or the
remote control.
Control Panel on Main Washer
4
3
1
2
1 Display
••The display shows the cycle status and
estimated time remaining.
••The display shows the estimated time
remaining while the size of the load is
being calculated automatically.
2 Start/Pause Button
••The Start/Pause button is used to start the
wash cycle or pause the wash cycle.
••If a temporary stop of the wash cycle is
needed, press the Start/Pause button on
the Main Washer display or the remote
control.
3 Programme Button
••Programmes are available according to
laundry type.
4 Quick Setting
••Child Lock, Remote Start, Selection
of Main Washer and Mini Washer are
displayed. You can turn on or off a function
by touch.
NOTE
••If the Start/Pause button is not pressed
again to resume the cycle within 5 minutes,
the display screen on the Main Washer will
automatically turn off.
CAUTION
••Do not touch the control panel of the product with wet hands. The buttons may not function properly.
25
EN
Control Panel on Mini Washer
1
2
3
4
1 Power Button
••Press the Power button to turn the
washing machine on.
2 Display
••The display shows the cycle status and
estimated time remaining.
•• : Drawer lock indicator
•• : Child lock indicator
3 Start/Pause Button
••The Start/Pause button is used to start the
wash cycle or pause the wash cycle.
••If a temporary stop of the wash cycle is
needed, press the Unlock button on the
right side in the Mini washer display or the
remote control.
NOTE
••If the drawer is not closed within 5 seconds
after pressing the Start/Pause button on
the Mini Washer's control panel, the
error is appeared.
••If you do not press the Start/Pause
button within 15 minutes of selecting
a programme, the washing machine
automatically turns off and all cycle settings
are lost. Any water remaining in the tub will
be drained.
4 Options
••Use these buttons to select the desired
options for the selected programme.
NOTE
••The Mini Washer's control panel display is not available during operation. Use the Main Washer's
control panel or the remote to control the Mini Washer during operation.
••Only the Unlock button on the right side can be used to pause the operation.
26
EN
Programme Table
Washing Programme
Programme
Light Soil
Underwear
Lingerie
Speed Wash
Baby Care
Rinse+Spin
Description
Note
Use this programme to
•• To change the setting during washing,
wash lightly soiled normal
change the setting after pressing
items, except delicate
Start/Pause button.
fabrics such as wool or silk.
Use this programme to
wash delicate items such as
lingerie or sheer and lacy
•• This programme is not for silk items.
clothes which could easily
be damaged in a normal
programme.
•• To reduce damage to textiles and
improve washing performance, use
Use this programme to
special neutral detergent for wool.
wash textiles, lingerie, or
fine clothes likely to shrink
•• To prevent damage to clothes, the
or deform.
drum spins gently to the left and right
for washing.
Use this programme to
speed up the washing time •• Use very little detergent in this
for small loads and lightly
programme.
soiled clothes.
•• Select a proper type of neutral
detergent.
•• It is more effective to pre-wash
Use this programme
laundry stained with food, sweat,
to wash baby wear
urine and feces briefly before
hygienically.
washing.
•• This programme is not recommended
for wool, silk or any other delicates.
Select this programme
to rinse and spin a load
•• Add fabric softener only.
separately from a regular
cycle.
Maximum
Load
2.0 kg
1.5 kg
1.0 kg
2.0 kg
1.5 kg
1.5 kg
NOTE
••Test accordance in conformity with IEC60456
••For water efficiency labeling programme, please select programme “Speed Wash”.
••This is the recommended programme designed to minimize water consumption for normally soiled
load at rated load capacity.
27
EN
Option Programme
Tub Clean
Rinse+
Use this option to keep the drum clean. For
information on using Tub Clean, see the
Cleaning the Washing Machine section.
Use this option to increase the number of rinsing
programmes.
1
Press the Power button.
2
Select a washing programme.
3
Press the Rinse+ button to set time
required.
••When you press the Rinse+ button, the
number of rinsing cycles (1 - 5) to be
added will be displayed.
4
Press the Start/Pause button.
No Spin
Use this option to wash and rinse.
••The setting lights above the buttons illuminate
to show the current selection.
1
Press the Rinse+ button for three seconds.
2
Press the Start/Pause button.
Spin Only
Use this option to spin-dry.
••The setting lights above the buttons illuminate
to show the current selection.
1
Press the Rinse+Spin button for three
seconds.
2
Press the Start/Pause button.
28
Child Lock
Use this option to disable the controls. This
feature can prevent children from changing
cycles or operating the appliance.
Locking the Control Panel
1
Press and hold the Rinse+ and Tub Clean
button at the same time for three seconds.
2
will appear on the display.
When the child lock is set, all buttons are
locked except the Power button.
NOTE
••Turning off the power or completing all cycles
will not reset the child lock function. You must
deactivate child lock before you can access
any other functions.
Unlocking the Control Panel
Press and hold the Rinse+ and Tub Clean
button at the same time for three seconds.
••To change the cycle or option, press the Start/
Pause button to stop operation, and then
choose the cycle or option which you wish to
change.
SMART FUNCTIONS
Using the Smart Diagnosis™
Function
Use this function if you need an accurate
diagnosis by an LG Electronics service
centre when the product malfunctions or fails.
Use this function only to contact the service
representative, not during normal operation.
1
Press the Power button after opening the
drawer on Mini Washer.
2
When instructed to do so by the call centre,
place the mouthpiece of your phone close to
the Smart Diagnosis™ icon.
EN
NOTE
••The Smart Diagnosis™ function depends on
the local call quality.
••The communication performance will improve
and you can receive better service if you use
the home phone.
••If the Smart Diagnosis™ data transfer is poor
due to poor call quality, you may not receive
the best Smart Diagnosis™ service.
ZigBee Module Specifications
Model
Frequency Range
Output Power(max.)
EBR81777301
2405 - 2480 MHz
2.3 dBm
x.
Ma
mm
10
3
Press and hold the Tub Clean button for
three seconds while holding the phone
mouthpiece to the Smart Diagnosis™ icon.
4
Keep the phone in place until the tone
transmission has finished. Time remaining
for data transfer is displayed.
••For best results, do not move the phone
while the tones are being transmitted.
••If the call centre agent is not able to get an
accurate recording of the data, you may be
asked to try again.
5
Once the countdown is over and the tones
have stopped, resume your conversation
with the call centre agent, who will then
be able to assist you using the information
transmitted for analysis.
29
MAINTENANCE
WARNING
••Unplug the washing machine before cleaning
to avoid the risk of electric shock. Failure to
follow this warning may result in serious injury,
fire, electric shock, or death.
••Never use harsh chemicals, abrasive cleaners,
or solvents to clean the washing machine.
They may damage the finish.
Cleaning the Washing
Machine
Care After Wash
••After the cycle is finished, wipe the door and
the inside of the door seal to remove any
moisture.
••Leave the door open to dry the drum interior.
••Wipe the body of the washing machine with a
dry cloth to remove any moisture.
Cleaning the Exterior
Proper care of your washing machine can
extend its life.
Door:
••Wash with a damp cloth on the outside and
inside and then dry with a soft cloth.
Exterior:
••Immediately wipe off any spills.
••Wipe with a damp cloth.
••Do not press the surface or the display with
sharp objects.
30
EN
Cleaning the Interior
••Use a towel or soft cloth to wipe around the
washing machine door opening and door glass.
••Always remove items from the washing
machine as soon as the cycle is complete.
Leaving damp items in the washing machine
can cause wrinkling, colour transfer, and odour.
••Run the Tub Clean programme once a month
(or more often if needed) to remove detergent
buildup and other residue
EN
Cleaning the Drum
Cleaning the Water Inlet Filter
Use the Tub Clean option to keep the drum
clean.
••Turn off the stopclock if the washing machine
is to be left for any length of time (e.g. holiday),
especially if there is no floor drain (gully) in the
immediate vicinity.
••
icon may blink on the display when the
water pressure is weak or an inlet filter is
clogged with dirt. Clean the inlet filter.
••The inlet filter screens could be plugged by
hard water scale, sediment in the water supply,
or other debris.
1
Press the Power button.
2
Dilute 200 ml liquid chlorine bleach in 1 ℓ of
water and pour the mixture in the drum.
3
Press the Tub Clean button to set time
required.
4
1
Turn off the water tap and unscrew the water
inlet hose.
2
Clean the filter using a hard bristle brush.
Press the Start/Pause button.
CAUTION
••If there is a child, be careful not to leave the
door open for too long.
31
EN
Cleaning the Lint Filter
The filter is an important part for efficient
washing performance result, so it needs special
care from you. It is recommended that the filter
be cleaned regularly.
1
Pull the cap of the lint filter.
Caution on Freezing During
Winter
••When frozen, the product does not operate
normally. Make sure to install the product
where it will not freeze during winter.
••In case the product must be installed outside
on a porch or in other outdoor conditions, make
sure to check the following.
How to Keep the Product from
Freezing
••After closing the tap, disconnect the cold
supply hose from the tap, and remove water
while keeping the hose facing downwards.
2
Open the cap and remove lint and then wash
out.
3
Insert the lower part of the filter into the
drum and close the cap until you hear a click
sound.
NOTE
••When the lint filter is damaged, contact LG
service centre.
••Do not operate the washing machine without
the lint filter.
••Do not place the lint filter loosely. Doing so may
damage the fabrics or the washing machine.
32
Supply hose
EN
How to Handle Freezing
Step 1. When the Door is Frozen
••Thaw out the door using a hot water cloth.
Step 2. When the Water Supply Hose is
Frozen
••
icon may blink on the display when water
supply problems occur, take the following
measures.
−−Take out water supply hose and connect to
the tap and check that water comes from the
tap and supply hose.
−−Turn off the tap, and thaw out the tap and
both connection areas of supply hose of the
product using a hot water cloth.
−−Take out supply hose and immerse in warm
water below 50–60 °C.
Supply hose
Step 3. When the Drain Pump is Frozen
••
,
icon may blink on the display when
drain pump problems occur, take the following
measures.
1
Pour 15 ℓ warm water below 50–60 °C in the
drum until washing machine wing nuts are
immersed and wait for an hour.
2
Press the Power button and then run the
Baby Care programme for an hour.
••When
icon appears on the display,
repeat steps 1 to 2.
3
Turn off the power when the Baby Care
programme is finished. If the drawer is
open, press the Rinse+Spin button for three
seconds and press the Start/Pause button
to run the Spin Only.
4
Select the Rinse+Spin programme and
press the Start/Pause button to check that
the washing machine works.
5
When
icon appears on the display,
thaw out the drain hose inner part with the
hot water.
50‒60 °C
33
TROUBLESHOOTING
EN
The appliance is equipped with an automatic error-monitoring system to detect and diagnose problems
at an early stage. If the appliance does not function properly or does not function at all, check the
following before you call for service:
Diagnosing Problems
Symptoms
The drawer does
not open.
Reason
Power failure, or the power
cord was pulled out during
washing.
Baby Care or Tub Clean
programmes were operated.
Solution
••After providing the power again, press the
Power button with the control panel of
Main Washer or the remote control.
••For safety reasons, the drawer may not
open when the washing machine is at
a high temperature inside. This is not a
malfunction, and the drawer will open
after a period of time.
Draining starts
when pressing
Start/ Pause
button.
The Start/Pause button is
pressed during washing.
••When pressing the Start/Pause button
during washing, the drawer is unlocked
after drainage for safety.
Rattling and
clanking noise
Foreign objects, such as
keys, coins, or safety pins
may be in drum.
••Stop washing machine, check drum for
foreign objects. If noise continues after
washing machine is restarted, call for
service.
••If sound continues, wash load is probably
out of balance. Stop and redistribute wash
load.
••Pause the cycle and redistribute the load
after the door unlocks.
Thumping sound
Vibrating noise
Heavy wash loads may
produce a thumping sound.
Wash load may be out of
balance.
Packaging materials were not
removed.
Wash load may be unevenly
distributed in the drum.
Not all leveling feet are
resting firmly and evenly on
the floor.
Floor not rigid enough.
Water leaks every
load
Hoses not installed correctly.
Excessive sudsing
Too much detergent or
incorrect detergent.
34
••Remove packing materials.
••Pause the cycle and redistribute the load
after the door unlocks.
••See Leveling the Appliance in the
Installation section.
••Make sure that the floor is solid and does
not flex.
••Check all fill and drain hose connections
to ensure that they are tight and secure.
••Reduce the amount of detergent for
lightly soiled laundry. If you use too much
detergent, excessive bubbles will remain
after rinsing.
EN
Symptoms
Staining
Water leaking
Wrinkling
Reason
Solution
Clothes were not properly
sorted.
••Always wash dark colors separately
from light colors and whites to prevent
discoloration.
••Never wash heavily soiled items washed
with lightly soiled items.
Supply hose connection is
loose at the tap, washing
machine, or drain hose
connector.
••Check hoses and drain hose connectors
for leaks, cracks and splits.
••Tighten hose connections.
••The washing machine pumps out water
very rapidly. Check for water backing up
out of the drain pipe during drain. If water
House drain pipes are
is seen coming out of the drain, check for
clogged.
proper drain hose installation and check
for restrictions in the drain. Contact a
plumber to repair drain pipe.
••Tie drain hose to supply hose or
standpipe to prevent it from coming out
Drain hose has come out
during drain. For smaller drain pipes,
of drain connector or is not
insert the drain hose into the pipe as far
inserted far enough.
as the drain hose flange. For larger drain
pipes, insert the drain hose into the pipe
2-5 cm past the flange.
••Reduce the load or use Main Washer.
Load is too large for the
••Stop the washing machine and check the
drum.
load. Make sure the load fits loosely in the
drum and the door closes easily.
••Oversudsing may create leaks, and
may be caused by the type and amount
of detergent used. Always reduce the
Oversudsing of detergent.
amount of detergent if the load is small
or lightly soiled, or if your water is very
soft. Never use more than the maximum
amount shown in the dispenser provided.
Washing machine not
••Always remove items from the washing
unloaded promptly.
machine as soon as the cycle is complete.
••The washing machine can be fully loaded,
the drum should not be tightly packed
Washing machine overloaded. but
with items. The door of the washing
machine should close easily.
35
EN
Symptoms
Washing machine
will not operate.
36
Reason
Solution
Control panel has powered off ••This is normal. Press the Power button to
due to inactivity.
turn the washing machine on.
Washing machine is
••Make sure cord is plugged securely into a
unplugged.
working outlet.
Water supply is turned off.
••Turn the cold water tap fully on.
••Make sure the cycle was set correctly,
Controls are not set properly.
close the door and press the Start/Pause
button.
••Close the door and drawer make sure
Door or drawer is open.
that nothing is caught under the door
preventing it from closing completely.
••Check house circuit breakers/fuses.
Replace fuses or reset breaker. The
Circuit breaker/fuse is
washing machine should be on a
tripped/blown.
dedicated branch circuit. The washing
machine will resume the cycle where it
stopped once power is restored.
••Press the Power button, then re-select
Control needs to be reset.
the desired programme and press the
Start/Pause button.
••Press the Start/Pause button with control
panel of Main Washer or remote control
Start/Pause was not pressed
after closing the drawer.
after a cycle was set.
••When using the control panel of Mini
Washer, press the Start/Pause button
and close the drawer within 5 seconds.
••Check another tap in the house to make
Extremely low water pressure. sure that household water pressure is
adequate.
••If the washing machine has been exposed
to temperatures below freezing for an
Washing machine is too cold.
extended period of time, allow it to warm
up before pressing the Power button.
EN
Symptoms
Reason
Filter clogged.
Supply hoses may be kinked.
Washing machine
is not filling
properly.
Insufficient water supply.
door and drawer are open.
Water level is too low.
Water in the
washing machine
does not drain or
drains slowly.
Wash cycle time is
longer than usual.
Musty or mildewy
odor in washing
machine
Washing machine
chimes repeatedly
before final rinse.
••Make sure the inlet filters on the fill
valves are not clogged. Refer to the filter
cleaning instructions.
••Check that supply hoses are not kinked or
clogged.
••Make sure that the cold water tap is
turned on all the way.
••The washing machine will not operate
if the door is open. Close the door and
make sure that nothing is caught under
the door preventing it from closing
completely.
••The fill level is optimized for the wash
motion to achieve the best wash
performance.
sure the drain hose is free of clogs,
Drain hose is kinked, pinched, ••Make
kinks, etc., and is not pinched behind or
or clogged.
under the washing machine.
Heavily soiled load.
Poor stain removal
Solution
Previously set stains.
The washing machine
automatically adjusts the
wash time for the amount of
laundry, water pressure and
other operating conditions.
Incorrect or too much
detergent has been used.
••Use Main Washer.
••Articles that have previously been washed
may have stains that have been set.
These stains may be difficult to remove
and may require hand washing or pretreating to aid in stain removal.
••This is normal. The washing machine
adjusts cycle time automatically to
provide optimal results for the selected
programme. The time remaining shown
in the display is only an estimate. Actual
time may vary.
••This machine requires very little
detergent. Use the provided detergent
measuring cup.
Inside of drum was not
cleaned properly.
••Run the Tub Clean programme regularly.
This is not an error.
••This is an alert to allow the addition of
liquid fabric softener before the final rinse.
37
EN
Error Messages
Symptoms
Reason
Solution
••Close the drawer and press Start/Pause
button to start the cycle.
Drawer is not closed properly. ••If the drawer is closed and the drawer
lock error message is displayed, call for
service.
••Open the drawer and make sure the
latch area is free of clothing or other
obstructions.
Door is not closed properly.
••Close the door, shut the drawer, and
press Start/Pause to start the cycle.
••If the door is closed and the door error
message is displayed, call for service.
The cold water tap is not fully ••Make sure that the cold water tap is fully
open.
open.
••Make sure that the hoses are not kinked
Water line hoses are kinked,
or pinched. Be careful when moving the
pinched, or crushed.
washing machine during cleaning and
maintenance.
Water inlet filters are clogged. ••Clean the inlet filters.
••Check another tap in the house to make
sure that household water pressure
is adequate and flow is not restricted.
Water supply pressure to tap
Disconnect the supply hose from the
or house is too low.
washing machine and run a few liters of
water through the hose to flush the water
supply lines. If flow is too low, contact a
plumber to have the water lines repaired.
••Hoses designed to limit leaks can trip
Water supply connected with
falsely and prevent the washing machine
leak-limiting hoses.
from filling. The use of leak limiting hoses
is not recommended.
•
•
Make
the drain hose is free of clogs,
Drain hose is kinked, pinched, kinks, sure
etc., and is not pinched behind or
or clogged.
under the washing machine.
38
EN
Symptoms
Reason
UE rebalancing operation is
not successful.
The load is too small.
Solution
••The automatic attempt to rebalance the
load was not successful. The cycle has
been paused to allow the load to be
manually adjusted.
••Add more items to allow the washing
machine to balance the loads.
Heavy articles are mixed with
lighter items.
••Wash articles of somewhat similar weight.
The load is out of balance.
••Manually redistribute the load if articles
have become tangled.
Control error.
••Unplug the power plug and call for
service.
Water level is too high due to
a faulty water valve.
••Close the cold water tap, unplug the
washing machine, and call for service.
The water level sensor is not
working correctly.
••Close the cold water tap, unplug the
washing machine, and call for service.
A motor error has occurred.
••Allow the washing machine to stand for 30
minutes and then restart the cycle. If the
LE error code persists, call for service.
It is time to run the Tub Clean
programme.
••Run the Tub Clean programme.
Mini Washer is being operated ••Mini Washer will not operate as a
without a full-size washing
standalone unit. It must be stacked under
machine.
an LG front-loading washing machine.
••The stacking switch will not operate
properly if the unit is not stacked under
Stacking switch is not
a matching LG Signature washer. This
working properly.
product is for use only in combination with
LG authorized compatible appliances.
••Thaw out the supply hose using a hot
Drain hose, supply hose or
water cloth.
drain pump is frozen.
••Pour warm water in the drum.
CL is not an error. This
prevents children from
changing cycles or operating
the appliance.
••To deactivate, turn off the Child Lock in
control panel of Main washer or press the
Rinse+ and Tub Clean button for three
seconds in control panel of Mini Washer.
39
Memo
Memo
Memo
Memo
Memo
Memo
Memo
Download PDF

advertising