LG | T1304DPE | LG T1304DPE Owner’s Manual

T8526AFCTM
02
02.2014
17
3
• The pulsator rotates for
8 seconds to detect the
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
5
• Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
Finish
Caution & Note
6
• When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
4
6
7
4
6
7
4
6
7
4
6
7
• If water is already in the tub, or putting
wet laundry into the tub before starting
will increase the WATER LEVEL.
• With lightweight bulky loads, WATER
LEVEL can be set low.
• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
• Washing with HOT water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
• In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
• When static pressure of water is more
than 2kg/cm2,
W as hing Pro grams
Close the lid
Washing Programs
18
Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SOAK mode can be used with FUZZY or JEAN or SILENT or FAVORITE program.
1
Press the POWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select the washing program.
3
Press the WASH button, to select SOAK program.
• Keep pressing the WASH button until the light turns on
‘SOAK’ and ‘WASH’ simultaneously as next image.
• SOAK program only works when socking time is 40, 50 or
60 minutes.
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
• Add the appropriate quantity of Detergent as the Detergent
manufacture instruction.
• The WATER LEVEL will be shown and water will be
supplied.
6
Close the lid.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the absorbed water by the laundry.
Finish
• When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
NOTE
• Order of Soak-Wash timing
min
min
min
min
Soak-Wash
min
min
min
min
Lamp
Off
min
min
min
min
min
• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing
the Wash button repeatedly.
• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin
buttons till you reach the desired times.
Rev.: 01
Date : 09.2013
19
1
Press the POWER (AUTO OFF) button to turn power on.
2
Select the FAVORITE program.
3
Select your FAVORITE wash conditions.
• Press the WATER button to select WATER.
• Press the WASH button, the RINSE button & the SPIN
button to select wash time, rinse time & spin time
respectively you want to store.
4
Press the START/PAUSE button to store & start your FAVORITE wash cycle.
Power turns off automatically after wash.
NOTE
To recall your FAVORITE cycle.
1. Press POWER on.
2. Select the FAVORITE cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.
Washing Programs
Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the
normal cycle memory and then recall it for use at a later time.
• Are there foreign objects, Such as coins, pins, etc.,
caught between the wash plate and the inner basket ?
• Turn off the washer and then press the Power button.
Press the spin speed button without selecting a cycle to
drain and spin the load.
When the spin is complete, remove the clothes and then
find and remove any object caught in the wash plate.
02
02.2014
02
02.2014
Model
T8526AFCTM
Water tab pressure
Weight
Wash capacity
Dimensions
02
02.2014
M emo
M emo
M emo
Download PDF

advertising