LG | WFT1161DD | LG WFT1061DD Owner’s Manual

Rev.: 01
Date : 10.2013
P
roduct Features
The Turbo Drum DD washing machine does not operate with the lid open.
If the lid is opened during wash, rinse and spin cycles, the machine will stop automatically.
Please close the door gently. Closing the door in an agressive manner can cause damage
and or injury.
sensors
The sensor automatically detects the quantity of Detergent put in by a user and the temperature and
quality of the water to produce the best algorithm for washing and rinsing, to give the best washing results.
Smart Drum achieved by DD Motor Technology
Smart Drum with Drum Washing Type is more
hygienic and cleaner washer tub that protects t
he fabric and prevents damages.
FUZZY logic control
A built-in load sensor automatically detects and measures the laundry load and a microprocessor
optimizes washing conditions such as ideal water consumption and washing time.
Advanced technology is built into the Electronic Control System which ensures the best washing result.
START
SENSING SETTING
Laundry Sensor
Water Level Sensor
Optimum
Washing
Condition
WASHING
AUTO
POWER
OFF
New DD type washing with fabric care
It rotates the tub and
creates cannon water
flow making the effect
of the detergent faster
improving the washing
effect and preventing
fabric damages
The half cycle rotation
of the tub to the
left/right helps the
melting of the detergent
for easy washing
The half cycle rotation
of the washing rotors to
the left/right removes
the stains
The half cycle rotation
of the tub to the left/right
balances the laundry
Low Noise Direct Drive System
The advanced Brushless DC motor rotates the Tub directly
without belt and clutch, thereby reducing the noise of the
washer.
The washing machine adjusts to optimum speed according to the
type of clothing in the load.
Rev.: 01
Date : 10.2013
C
ontents
READ THIS MANUAL
Inside you will find many helpful hints on how to use and maintain your washer
properly. Just a little preventive care on your part can save you a great deal of time and
money over the life of your washer. You will find many answers to common problems
in the Troubleshooting section. If you review our chart of Troubleshooting Tips first, you
may not need to call for service at all.
Introduction
Before Starting to Wash
Washing Programs
Additional Function
Program
Installation
Care and Maintenance
Troubleshooting
Terms of Warranty
Specification
Safety Information
Identification of Parts
Function Information
Preparation Before Washing
Use of Water, Dispenser Drawer, Detergent and Softener
Special Guide for Stain Removal
Function of each Button
FUZZY Wash (Normal Wash)
WOOL Wash
QUICK WASH
JEANS Wash
SMART CLEANING
SOAK Wash
FAVORITE Wash
ECO SAVE Wash
TUB CLEAN
AIR DRY
TUB DRY
Option Washing
DELAY START (RESERVATION) Wash
Other Useful Functions
Placing and Leveling
Connecting Water Supply Hose
Connecting Drain Hose
Grounding Method
Cleaning and Maintenance
Use of Handle Locker
Common washing problems
Troubleshooting
Using SMART DIAGNOSIS TM
Blanket folding method
Terms of Warranty
Specification
4
7
8
9
10
13
14
16
16
16
16
16
18
19
20
21
22
22
23
24
25
26
27
30
31
32
34
35
36
37
38
39
40
4
Introduction
S
afety Information
Read carefully and thoroughly through this booklet as it contains important safety information
that will protect the user from unexpected dangers and prevent potential damages to the product.
This booklet is divided into 2 parts : Warning and Caution.
: This is a warning sign specifying user’s applications which might
be dangerous.
: This is a sign specifying ‘Strictly Forbidden’ applications.
WARNING : Failure to comply with the instructions under this
sign may result in major physical injuries or death.
CAUTION: Failure to comply with the instructions under this
sign may result in minor physical injuries or
damages to the product.
WATER
HEATER
SAFETY
PROPER
INSTALLATION
WARNING
• Under certain conditions hydrogen gas may be produced in a water heater that has not been
used for two weeks or more. Hydrogen gas can be explosive under these circumstances.
If the HOT water has not been used for two weeks or more, prevent the possibility of
damage or injury by turning on all Hot water faucets and allowing them to run for several
minutes. Do this before using any electrical appliance which is connected to the HOT
water system. This simple procedure will allow any built-up hydrogen gas to escape. Since
the gas is flammable, do not smoke or use an open flame or appliance during this process.
CAUTION
• The base opening must not be obstructed by carpeting when the washing machine is installed on a
carpeted floor.
• Install or store where it will not be exposed to temperatures below freezing or exposed to the weather.
If the product is exposed to such conditions, electric shock, fire, break down or
deformation may occur.
• Properly ground washer to conform with all governing codes and ordinances. Follow details in
Installation Instructions.
If not grounded properly, break down and leakage of electricity may occur, which may
cause electric shock.
• Must be positioned so that the plug is accessible.
If the plug is placed between the wall and the machine, it may get damaged, possibly
causing fire or electric shock.
• Make sure the plug is completely pushed into the outlet.
Failure to do so may cause electric shock and fire due to overheating.
S
5
afety Information
WARNING
• Keep the area underneath and around your appliances free of combustible
materials such as lint, paper, rags, chemical, etc.
Operating with such materials around the machine may trigger
explosion or fire.
Introduction
YOUR
LAUNDRY
AREA
• Close supervision is necessary if this appliance is used by or near children.
Do not allow children to play on, with, or inside this or any other appliance.
There is potential danger that children might drown or suffocate in the tub.
Do not touch the power plug with a wet hand.
It will cause electric shock
Do not put your hand, foot or anything under the washing machine
while the washing machine is in operation.
There is a rotating mechanism under the machine, so you could be injured.
WHEN USING
THE WASHER
CAUTION
• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• The laundry process can reduce the flame retardancy of fabrics. To avoid such a result,
carefully follow the garment manufacturer’s wash and care instructions.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by person responsible for their safety,
Children should be supervised to ensure that they do not play with the appliance
• To minimize the possibility of electric shock, unplug this appliance from the power
supply or disconnect the washer at the household distribution panel by removing the
fuse or switching off the circuit breaker before attempting any maintenance or cleaning.
: Pressing Circuit button to turn off does NOT
disconnect the appliance from the power supply.
• Make sure that drainage is working properly.
If water is not drained properly, your floor may get flooded. Flooded floors
may induce electricity leakage, further resulting in electric shock or fire.
• If, during spinning, opening the lid does not stop the tub within about 15 seconds,
immediately discontinue operating the machine.
Call for repair. A machine that spins with its door open may cause injuries.
Never reach into washer while it is moving.
Wait until the machine has completely stopped before opening the lid.
Even slow rotation can cause injury.
Never attempt to operate this appliance if it is damaged, malfunctioning, partially
disassembled, or has missing or broken parts, including a damaged cord or plug.
Operating with a damaged plug may cause electric shock.
Do not use water hotter than 50°C.
Use of excessively hot water may cause damage to fabrics or cause
leakage of water.
Rev.: 01
Date : 10.2013
6
Introduction
S
afety Information
WHEN USING
THE WASHER
WARNING
Do not use a plug socket and wiring equipment for more than their rated capacity.
Exceeding the limit may lead to electric shock, fire , break down, and/or
deformation of parts.
Do not mix chlorine bleach with ammonia or acids such as vinegar and/or rust remover.
Mixing different chemicals can produce toxic gases which may cause death.
Do not wash or dry articles that have been cleaned in, washed in, soaked in, or spotted
with combustible or explosive substances (such as wax, oil, paint, gasoline, drycleaning solvents, kerosene, etc). Do not add these substances to the wash water.
Do not use or place these substances around your washer or dryer during operation.
It may ignite or explode.
WHEN NOT
IN USE
CAUTION
• Turn off water faucets to relieve pressure on hoses and valves and to minimize leakage
if a break or rupture should occur. Check the condition of the fill hoses; they may need
replacement after 5years.
• When the air temperature is high and the water temperature is low, condensation may
occur and thus wet the floor.
• Wipe off dirt or dust on the contacts of the power plug.
Using unclean power plug may cause fire.
• Before discarding a washer, or removing it from service, remove the washer lid to
prevent children from hiding inside.
Children may be trapped and suffocated if the lid is left intact.
Do not attempt to repair or replace any part of this appliance unless specifically
recommended in this Owner’s Manual, or in published user-repair instructions
that you understand and have the skills to carry out.
Operating the machine with improperly replaced parts may be a
cause for fire or electric shock.
Do not tamper with controls.
It may lead to electric shock, fire , break down, deformation.
Do not yank the power cord in an attempt to disconnect the power plug.
Securely hold the power plug to unplug the machine.
Failure to observe these instructions may cause electric shock or fire
due to short-circuit .
When you are cleaning the washing machine, do not apply water directly to any
part of the washing machine.
It will cause short circuit and electric shock.
I
7
dentification of Parts
POWDER AND LIQUID
DETERGENT BOX
WATER SUPPLY
HOSE
Make sure the
water does not
leak.
LIQUID SOFTENER
POWER PLUG
If the supply cord is
damaged, it must be
replaced by the
manufacturer or its
service agents or
similarly qualified
person in order to
avoid a hazard.
BLEACH
DISPENSER
FUNCTION
SELECTOR
TUB
JET SPRAY
START/PAUSE
BUTTON
Use to start or
stop the washing
machine
temporarily.
DRAIN HOSE
for pump model
Check if the drain
hose is hung up
before operating the
washing machine.
DRAIN HOSE
for non pump
model
ADJUSTABLE LEGS
Use to level the washing
machine for correct
balance & spin
operation.
BASE
Accessories
Water supply hoses
Drain hose
or
1 Each for COLD and
HOT water
NOTE
“ ” Part can be different according to the model.
or
Anti-rat cover (option)
Introduction
Body
Introduction
8
F
unction Information
Our machine provides various washing methods which suits various conditions
and types of laundry.
Different types of laundry washing
FUZZY(Normal) Wash
Use this Program for everyday washing e.g. sheets, towels, T-shirts. (refer to page 16)
JEANS Wash
Use this Program for heavily soiled durable garments e.g. overalls, jeans.
Thick and heavy clothes or those which are excessively dirty like jeans or working uniforms can be washed. (refer to page 16)
SMART CLEANING
Use this program to get better rising performance. (refer to page 16)
WOOL Wash
Wool clothes (lingerie, wool, etc.) which may be easily damaged can be washed. (refer to page 16)
The fibers of machine washable woolens have been specifically modified to prevent felting when they are machine washed.
Most handknitted garments are not made of machine washable wool and we recommend that you hand wash them
• Before washing your woolens check the care label for the washing instructions.
• When washing woolens use a mild Detergent recommended for washing wool.
• Hand washed woolens may be spun in a washing machine to reduce the time they take to dry.
• To dry woolens lay down them flat on a towel and pat into shape. Dry woolens out of direct sunlight.
(The heat and tumble action of a dryer may cause shrinkage or felting of woolen garments.)
Some wool underlays and sheepskin products can be washed in a washing machine but may cause pump blockages.
(Ensure that the whole article is suitable for machine washing and not just the backing material.)
You may wish to handwash these articles and place them in the machine to spin dry.
FAVORITE Wash
This setting allows you to store your FAVORITE wash conditions in the normal cycle memory. (refer to page 19)
ECO SAVE Wash
Use this program to save water consumption (refer to page 20)
Washing according to the condition of laundry
QUICK WASH
QUICK WASH can be selected to wash lightly soiled clothes of less than 2.0 kg in a short time. (refer to page 16)
SOAK Wash
SOAK Wash can be selected to wash heavily soiled laundry by soaking in water for some time to remove dirt and
grime. (refer to page 18)
Other washing method
TUB CLEAN
Use this program to clean the inside of washing machine especially Inner tub & Outer tub . (refer to page 21)
DELAY START Wash
DELAY START Wash is used to delay the finishing time of the operation.
The number of hours to be delayed can be set by the user accordingly. (refer to page 24)
OPTION WASH
When the user needs only SPIN, RINSE/SPIN, RINSE, WASH/RINSE, WASH, WASH/RINSE/SPIN,
SOAK/WASH/RINSE/SPIN. (refer to page 23)
reparation Before Washing
Before Startin g to Wash
P
9
Care Labels
* Look for a care label on your clothes. This will tell you about the fabric content of your garment
and how it should be washed.
Sort clothes into loads that can be washed with the same wash cycle, Water Temperature and spin speed.
Sorting
To get the best results, different fabrics need to be washed in different ways.
• SOIL (Heavy, Normal, Light)
Separate clothes according to the type and amount of soil.
• COLOR (Whites, Lights, Darks) Separate white fabrics from colored fabrics.
• LINT (Lint producers, Collectors) Separate lint producers and lint collectors.
Lint Producers
Lint Collectors
Terry cloth, Chenille, Towels, Nappies, Diapers
Synthetics, Corduroy, Permanent Press, Socks
Check before Loading
• Check all pockets to make sure that they are empty. Things such as nails, hairclips, matches,
pens, coins, and keys can damage both your washer and your clothes.
• Mend any torn garments or loose buttons. Tears or holes may become larger during washing.
• Remove belts, underwires, etc. to prevent damage to the machine or your clothes.
• Pretreat any dirt and stains.
• Make sure the clothes are washable in water.
• Check the washing instructions.
• Remove tissue in pockets.
WIRE
CAUTION
• Do not wash or spin any item labeled or known to be water-proof or water-resistant, evenif the product care label on the item
permits machine washing.
• Failure to follow these instructions could result in severe damage to your laundry, your washer and/or property damage as a result
of abnormal vibration of the washer.
- Examples of water-proof or water-resistant items include certain mattress pads, mattress covers, rain gear, camping gear,
skiing apparel , outdoor gear and similar items.
Pretreatment on stains or heavy soil
• Pretreat shirt collars and cuffs with a pre-wash product or liquid Detergent when placing them in the washer.
Before washing treat special stains with bar soaps, liquid Detergent or a paste of water and granular Detergent.
• Use a pretreat soil and stain remover.
Treat stains AS SOON AS POSSIBLE. The longer they are left the harder they are to remove.
(For more detail refer to page13)
Loading
Do not wash fabrics containing flammable materials (waxes, cleaning fluids, etc.).
Load Size
The WATER LEVEL should just cover the clothes. Adjust the load size
accordingly. Loosely load clothes no higher than the top row of holes in the
washer tub. To add items after washer has started, press Start button and
submerge additional items. Close the lid and press Start button again to restart.
WARNING
Fire Hazard
Never place items in the washer that are
dampened with gasoline or other flammable
fluids.
No washer can completely remove oil.
Do not dry anything that has ever had any type
of oil on it (including cooking oils).
Doing so can result in death, explosion, or fire.
Light and Large-sized clothing
Clothes like downs and woollens are light weight, large and float easily. Use a nylon net and
wash them in a small amount of water. If the laundry floats during the wash cycle, it may
become damaged. Use dissolved Detergent to prevent the Detergent from clumping.
Long laundry items
Use nylon nets for long, DELICATE items. For laundry with long strings or long length , a net will prevent
tangling during washing. Fasten zippers, hook, and strings to make sure that these items don't snag on other clothes.
Nylon net is not supplied by LG.
Before Startin g to Wash
10
U
se of Water, Dispenser Drawer, Detergent and Softener
Using Water
Amount of WATER LEVEL
• This machine detects the quantity of laundry automatically, then sets the
WATER LEVEL and proper amount of Detergent.
• When you select a wash program, the WATER LEVEL will be shown on the
control panel.
• The following table shows the amount of water.
• When the WATER LEVEL is automatically detected, it may differ depending
on the quantity of laundry even though the same WATER LEVEL is indicated
on the control panel.
NOTE
[ Minimum water amount ]
It depends on laundry load and washer model. Or manually you can pour a certain amount water into tub
directly to some height. That’s because if water level reaches to the some height sensed by washer itself, washer
automatically operates. In other words, it is needed to pour water to the point when washer starts operating.
Water Temperature (for 2 valve model)
• The machine sets the appropriate temperature automatically according to the wash program .
• The temperature of the water impacts the effectiveness of all laundry additives and therefore, the cleaning results.
We recommend temperatures of:
- HOT 49~60°C…(120-140˚F)
White items, diapers, underclothing and heavily soiled, colorfast items.
- WARM 29~40°C…(85-105˚F)
Most items
- COLD* 18~24°C…(65-75˚F)
Only very bright colors with light soil.
• When washing in COLD water additional steps may be needed:
- Adjust Detergent amount and pre-dissolve Detergent in WARM water
- Pretreat spots and stains
- Soak heavily soiled items
- Use appropriate bleach
* Temperature below 18°C…(65˚F) will not activate laundry additives and may cause lint, residue, poor cleaning, etc.
In addition, Detergent manufactures and care labels define COLD water as 26~29°C…(80-85˚F).
If the temperature of the water in the tub is too cold for your hands, the Detergent will not activate and clean effectively.
NOTE
If iron is present in the water the clothes may become an all-over yellow or they may be stained with brown or orange
spots or streaks. Iron is not always visible. Installation of water softener or an iron filter may be necessary for severe cases.
Using the Dispenser Drawer
The dispenser drawer contains 2 compartments:
• Liquid Fabric Softener
• Liquid or Powder Low-Sudsing, High-Efficiency Detergent
The dispenser automatically dispenses additives at the proper time in the wash cycle.
1. Slowly open the dispenser drawer by pulling the drawer out until it stops.
2. After adding laundry products, slowly close the dispenser drawer. Closing the
drawer too quickly could result in early dispensing of additives.
• Avoid overfilling or splashing when adding laundry products to the dispenser. Doing
so could result in early dispensing of laundry products.
At the end of the cycle, you may see water in the compartments. This is part of the
normal operation of the washer.
NOTE : Do not use bleach in the dispenser drawer.
11
Detergent
Follow the Detergent package directions. Using too much Detergent is a common cause of laundry problems
Use more Detergent if you have hard water, large loads, greasy or oily soils or higher Water Temperature.
Choosing the right Detergent
We recommend the use of front loader type, low sudsing high efficiency Detergent(powder,liquid or
concentrated).
Soap flakes or granulated soap powders should not be used in your washing machine.When washing woolens
Remember to use Detergent suitable for washing woolens.
Using Detergent
How much Detergent
The correct amount of Detergent will vary depending on the amount of soil in your clothes (Jeans and work
clothes may need more Detergent, while bath towels usually need less.).
For liquid and concentrated Detergents, follow the recommendations of the Detergent manufacturer.
Note: To check you are using the correct amount of Detergent, lift the lid of your machine about halfway through the wash. There should be a thin layer of foam over the surface of the water. Lots of
foam may look good, but it does not contribute to cleaning your clothes. No foam means not enough
Detergent has been used; soil and lint can settle back on the clothes or the washing machine.
If excess Detergent is used, the rinse will not be as clean and efficient. Also, it could cause
environmental pollution, And long term scrud build up.
Adding Detergent
Add measured detergent to the detergent compartment of the dispenser drawer.
We recommend the use of powdered detergent in the dispenser when using a delay wash function.
We recommend to dissolve measured detergent in 1 liter warm water before addition to the machine.
Detergent is flushed through the dispenser at the beginning of the wash phase.
Detergent usage may need to be adjusted for water temperature, water hardness, size and soil level of the load.
Avoid using too much detergent in your washer, as it can lead to oversudsing and detergent residue being left on
the clothes.
Note : Using Liquid detergent
- Dilute Liquid detergent with water and pour into the tub, start the cycle.
- Delay wash course is not available if you use liquid detergent.
Attention
Using liquid detergent without diluting, or leaving laundry for a long time after pouring
diluted liquid detergent into the tub might cause damage, bleaching or discoloration of cloth.
Before Starting to Wash
Using Detergent
Before Starting to Wash
12
U
se of Water, Dispenser Drawer, Detergent and Softener
Attention
Do not mix with Detergent or bleach.
Never pour fabric softener directly on clothes. It may stain them.
Do not stop the washer during the first spin for timely dispensing.
Option washing is not designed to be used with fabric softener dispenser.
Scrud(Waxy Build up)
Scrud is the name given to the waxy build-up that can occur within any washer when the fabric softener
comes into contact with Detergent. This build-up is not brought about by a fault in the machine.
If scrud is allowed to build-up in the machine it can result in stains on your clothes or an unpleasant
smell in your washer.
If you wish to use fabric softener we recommend
• Using fabric softener sparingly.
• When filling the dispenser, do not splash or overfill.
• Clean dispenser as soon as the cycle is finished.
• Clean your machine regularly. (refer to page 21 or 32)
• Cold water washing increases the chance of this build-up occurring. We recommend a regular WARM or
HOT wash e.g. every 5th wash should be at least a warm one.
• Fabric softener of thinner consistency is less likely to leave residue on the dispenser and contribute to a
build-up.
13
WARNING
Do not use or mix liquid chlorine bleach with other household chemicals such as toilet cleaners, rust removers, acid or
products containing ammonia. These mixtures can produce dangerous fumes which can cause serious injury or death.
To reduce the risk of fire or serious injury to persons or property, comply with the basic warnings listed below:
• Read and comply with all instructions on stain removal products.
• Keep stain removal products in their original labeled containers and out of children’s reach.
• Thoroughly wash any utensil used.
• Do not combine stain removal products, especially ammonia and chlorine bleach. Dangerous fumes may result.
• Never wash items which have been previously cleaned in, washed in, soaked in or spotted with gasoline, dry cleaning solvents
or other flammable or explosive substances because they give off vapors that could ignite or explode.
• Never use highly flammable solvents, such as gasoline, inside the home. Vapors can explode on contact with flames or sparks.
For successful stain removal:
• Remove stains promptly.
• Determine the kind of stain, then follow the recommended treatment in the stain
removal chart below.
• To pretreat stains, use a prewash product, liquid Detergent, or a paste made from
granular Detergent and water.
• Use COLD water on unknown stains because HOT water can set stains.
• Check care label instructions for treatments to avoid on specific fabrics.
Follow fabric care label
• Check for colorfastness by testing stain remover on an inside seam.
instructions
• Rinse and wash items after stain removal.
Stain Removal
STAIN
Adhesive tape, chewing gum,
rubber cement
Baby formula, dairy products, egg
Beverages (coffee, tea, soda, juice,
alcoholic beverages)
Blood
Candle wax, crayon
Chocolate
Collar or cuff soil, cosmetics
Dye transfer on white fabric
Grass
Grease, oil, tar (butter, fats, salad
dressing, cooking oils, car grease,
motor oils)
Ink
Mildew, scorch
Mud
Mustard, tomato
Nail polish
Paint, varnish
Rust, brown or yellow
discoloration
Shoe polish
TREATMENT
Apply ice. Scrape off excess. Place stain face down on paper towels. Saturate with prewash stain remover or
nonflammable dry cleaning fluid.
Use product containing enzymes to pretreat or soak stains.
Pretreat stain. Wash using COLD water and bleach safe for fabric.
Rinse with COLD water. Rub with bar soap. Or pretreat or soak with product containing enzymes. Wash using
bleach safe for fabric.
Scrape off surface wax. Place stain face down between paper towels. Press with warm iron until wax is absorbed.
Replace paper towels frequently. Treat remaining stain with prewash stain remover or nonflammable dry cleaning
fluid. Hand wash to remove solvent. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Pretreat with prewash stain remover or rub with bar soap.
Use packaged color remover. Wash using bleach safe for fabric.
Pretreat or soak in WARM water using product containing enzymes. Wash using bleach safe for fabric.
Scrape residue from fabric. Pretreat. Wash using hottest water safe for fabric. For heavy stains and tar, apply
nonflammable dry cleaning fluid to back of stain. Replace towels under stain frequently. Rinse throughly. Wash
using hottest water safe for fabric.
Some inks may be impossible to remove. Washing may set some inks. Use prewash stain remover, denatured
alcohol or nonflammable dry cleaning fluid.
Wash with chlorine bleach if safe for fabric. Or, soak in oxygen bleach and HOT water before washing. Badly
mildewed fabrics may be permanently damaged.
Brush off dry mud. Pretreat or soak with product containing enzymes.
Pretreat with prewash stain remover. Wash using bleach safe for fabric.
May be impossible to remove. Place stain face down on paper towels. Apply nail polish remover to back of stain.
Repeat, replacing paper towels frequently. Do not use on acetate fabrics.
WATER BASED : Rinse fabric in cool water while stain is wet. Wash. Once paint is dry, it cannot be removed,
OIL BASED AND VARNISH : Use solvent recommended on can label. Rinse throughly before washing.
For spots, use rust remover safe for fabric. For discoloration of an entire load, use phosphate Detergent and
nonchlorine bleach. Do not use chlorine bleach because it may intensify discoloration.
LIQUID : Pretreat with a paste of granular Detergent and water. PASTE : Scrape residue from fabric. Pretreat with
prewash stain remover or nonflammable dry cleaning fluid. Rub Detergent into dampened area, Wash using bleach
safe for fabric.
Before Starting to Wash
S
pecial Guide for Stain Removal
Before Startin g to Wash
14
F
unction of each Button
BEEPER BUTTON
• Use to select Beeper
Pressing the button allows
HIGH OFF LOW
HIGH respectively.
WATER LEVEL BUTTON
• Use to select the proper amount of water in relation
to the weight and type of laundry.
• Automatically controlled,but can be selected
manually by pressing the WATER LEVEL. Button
• WATER is automatically selected for
FUZZY(normal) program.
The following settings are indicated as the button is
pushed
7 8 9 10 1 2 3 4 5 6 7
TIME LEFT, DELAY START
(RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining time
is indicated.
• DELAY START INDICATION
(RESERVATION) - When DELAY START
(RESERVATION) program is selected, it
indicates the finishing time. (RES.=DELAY)
• Alarm indication - When an error occurs, an error
message appears to indicate the abnormality.
For example,
indicates that the lid is open.
AIR DRY
• This function is used to reduce the drying time
of the laundry by allowing air to circulate
within the bowl in order to reduce moisture
levels.It does not dry the clothes completely.
• Air dry selections light up in sequence as
follows.
60 90 120 60 as the button is pushed.
• Press the button for 3 seconds to select and
press the Power botton to cancel the operation.
(refer to page 22)
SOIL LEVEL BUTTON
TUB DRY
WASH. RINSE. SPIN BUTTON
CHILD LOCK FUNCTION
• This button allows you to
select the strength of the
wash action.
• Power option selections
light up in sequence as
follows Normal Heavy
Light Normal as the
button is pushed.
This can be selected for any
program.
• Adjustment can be made
while washing.
• Use this when you
want to dry the
empty tub after a
wash.
• This can be
set/canceled by
pressing the Wash
button and Rinse
button
simultaneously.
(refer to page 22)
• Use when wash, rinse, spin
time need to be adjusted.
• The time increases when the
button is pressed .
• If adjustments are needed
during the wash,press the
[start/pause ] button before
making any changes.
• When the button is pressed
during washing,the
remaining time is displayed.
• Use to lock or unlock the
control buttons to prevent
settings from being
changed by a child.
To lock,push the RINSE
and SPIN buttons
simultaneously and to
unlock push them one
more time during the
washing process.
(refer to page 25)
NOTE
* For optimizing the washing algorithm, the displaying time may be changed during washing-increased by
4 minutes at maximum and decreased by 3 minutes at maximum.
* If the Detergent quantity is put more than the standard, for increasing the rinsing performance, it automatically
adds rinsing, and the remaining time may be increased.
* The standard detected by the sensor changing the algorithm is set by the normal standard. It may not be same to
the washing habit of a specific user. So, it does not matter that the user uses it according to her/his washing habit.
* The sensor for a Detergent quantity is designed to detect based on a synthetic Detergent powder. If you put a
liquid one or a natural one or too much bleaching agent, the detecting ability of the sensor may be decreased.
15
• It only operates in FUZZY Program.
• During being detected by the sensor, the LED flashes green, orange
and red in turn. And, after detecting, the LED lights a specific color according to the detecting condition as
follows:
If the current washing condition (Detergent quantity, Water Temperature, water quality, etc.) is determined as
better than the standard one, it optimizes the algorithm to save the energy by decreasing washing time/strength,
and the LED automatically turns to red.
If the current washing condition is determined as worse than the standard one, it optimizes the algorithm by
increasing washing time/strength, and the LED automatically turns to orange.
If the current washing condition is determined as equal to the standard one, the algorithm has no change and the
LED turns to green.
POWER(AUTO OFF)
BUTTON
• Use to turn the power on or off.
• Push again and power goes on or off
• The power goes off automatically about
10 seconds after the wash is finished.
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button
is pushed.
• The following settings are indicated
as the button is pushed 3 4 5
... 11 12 14 16 ...46 48
3 HOUR.
• To cancel delay time, turn the power
switch off.
(refer to page 24)
PROGRAM BUTTON
• Use for selecting wash program.
• This button allows you to select 8
different programs for different kinds of
laundry and dirtiness.
• program selections light up in sequence as
follows: FUZZY(Normal) WOOL
START/PAUSE BUTTON
• Use to start or pause the
washing process.
• Repeats start and pause by
pushing the button.
QUICK WASH
JEANS
SMART
CLEANING ECO SAVE
FAVORITE
TUB CLEAN FUZZY(Normal) etc.
Select the desired program by pressing the
button.
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub. (refer to page 21)
* Even if the water level is changed by the user in FUZZY(Normal) Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
Before Starting to Wash
WASHING CONDITION INDICATOR (OPTION)
16
Washing Programs
W
ashing Programs
Add
the
laundry
Washing
Programs
1
Add
the Detergent
2
4
(Normal Wash)
Used for normal loads, this
mode automatically selects the
most appropriate conditions
and completes the sequence
in one operation. The built-in
sensor detects the size of the
load and the ideal wash
power and wash, rinse and
spin times are set accordingly.
• Add the appropriate
quantity of Detergent
as indicated by the
WATER LEVEL.
Or follow the
Detergent
manufacturer’s
instructions
1
3
Use this program for washing
delicate fabrics such as lingerie and
woolens. (wash only “water
washable” clothes)
Before washing your woolens
check the care label for the
washing instructions.
(wash only water washable clothes)
• Select the
WOOL
program on
the Control
panel.
1
3
2
• Select the
Use this mode when washing
lightly soiled clothes for a short
time. The highly recommended
laundry amount is under 2.0kg.
QUICK
WASH
program on
the Control
panel.
1
Use Jean program when
washing Jeans of different sizes
Use this program to increase
rinsing performance.
This would include underwear
and baby clothes.
If someone has sensitive skin or
skin trouble,use this program.
2
3
• Spread
the jean
evenly in
the tub
1
3
2
5
• Use neutral
Detergent
appropriate for the
laundry.
• When washing
woolens use a mild
Detergent
recommend- ed for
washing wool.
5
• Add the appropriate
quantity of Detergent
as indicated by the
WATER LEVEL.
Or follow the
Detergent
manufacturer’s
instructions
5
• Select the
JEANS
program on
the Control
panel.
2
• Select the
SMART
CLEANING
program on the
Control panel.
5
17
3
• The pulsator rotates for
8 seconds to detect the
laundry load.
• Then the WATER LEVEL
and the amount of
Detergent to be used
will be shown and
water will be supplied.
5
• Water will be
supplied for 2
minutes after the
start of the wash to
supplement the
water the laundry
has absorbed.
Finish
Caution & Note
6
• When the wash
program ends, the
buzzer will ring
for 10 seconds
before the Power
goes off
automatically.
4
6
7
4
6
7
4
6
7
4
6
7
• If water is already in the tub, or putting
wet laundry into the tub before starting
will increase the WATER LEVEL.
• With lightweight bulky loads, WATER
LEVEL can be set low.
• When setting the WATER LEVEL
manually, do not set to Medium to
prevent damage to laundry.
• Washing with HOT water may damage
the laundry (Water is set to cold
automatically). Ensure that the load is
under 2kg.
• In order to avoid damage to laundry,
the spin cycle may appear slow.
This also avoids wrinkles and clothing
may still contain some water. This is
normal.
• When static pressure of water is more
than 2kgf/cm2(200kPa)
Rev.: 01
Date : 10.2013
Washing Programs
Close the lid
Washing Programs
18
S
OAK Wash
Use this mode to wash normal clothes or thick and heavy clothes which are excessively dirty.
SOAK mode can be used with FUZZY or JEAN or SMART CLEANING or FAVORITE program.
1
Press the POWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select the washing program.
3
Press the WASH button, to select SOAK program.
• Keep pressing the WASH button until the light turns on
‘SOAK’ and ‘WASH’ simultaneously as next image.
• SOAK program only works when socking time is 40, 50 or
60 minutes.
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
• Add the appropriate quantity of Detergent as the Detergent
manufacture instruction.
• The WATER LEVEL will be shown and water will be
supplied.
6
Close the lid.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the absorbed water by the laundry.
Finish
• When the wash program ends, the buzzer will ring for
10seconds before the Power goes off automatically.
NOTE
• Order of Soak-Wash timing
min
min
min
min
Soak-Wash
min
min
min
min
Lamp
Off
min
min
min
min
min
• Select soaking time 40minutes, 50minutes, or 60minutes (including washing time) by pressing
the Wash button repeatedly.
• If necessary, select the times of Rinse and the time for Spinning by pressing the Rinse or Spin
buttons till you reach the desired times.
Rev.: 01
Date : 10.2013
AVORITE Wash
Pressing the FAVORITE button allows you to store your FAVORITE wash conditions in the
normal cycle memory and then recall it for use at a later time.
1
Press the POWER (AUTO OFF) button to turn power on.
2
Select the FAVORITE program.
3
Select your FAVORITE wash conditions.
• Press the WATER LEVEL button to select WATER.
• Press the WASH button, the RINSE button & the SPIN
button to select wash time, rinse time & spin time
respectively you want to store.
4
Press the START/PAUSE button to store & start your FAVORITE wash cycle.
Power turns off automatically after wash.
NOTE
To recall your FAVORITE cycle.
1. Press POWER on.
2. Select the FAVORITE cycle by pressing the PROGRAM.
3. Press the START/PAUSE button. Then the wash cycle starts.
Washing Programs
F
19
Washing Programs
20
E
CO Save
Use this programe to save water consumption
1
Press the POWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select ECO SAVE program.
-. Display will be shown “A”
3
Press the WATER LEVEL button water level display show “7”
-. Display will be shown 45:29
4
Press RINSE button continue until display change from “2” to “1”
RINSE
5
Add the laundry into the washing tub.
6
Press the START/PAUSE button.
7
Add the Detergent and close the lid.
NOTE
Recommendation Mode :
Eco Save+1 Rinse is the recommended program for Normally Soiled Clothing equal to the rate capacity
The water efficiency label program set at ECO SAVE + 1 Rinse in accordance and in conformity
with IEC 60456
”
•The washer will shake when loads distribution are not evenly display show “
”. Customer have to
distributed in Inner Tub evenly. Display show “
”. Customer press “start button” 2 times for washing machine
operate continuously.
Rev.: 01
Date : 10.2013
UB CLEAN
If scrud is allowed to build-up in the machine it can result in stains on your clothes or unpleasant smell in
your washer.
Scrud is the way build-up that can occur within any washer when the fabric softener comes into contact
with Detergent, and according to particular degree of dirtiness or quality of water to be use, in these
case, use this program to clean inner tub and outer tub.
1
Press the POWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select the TUB CLEAN program.
3
Press the START/PAUSE button.
4
After 10 minutes of water supplement. Add the oxygenated bleach (about 300 m ).
• Left time is displayed.
• Do not use Detergent box.
• Do not place any laundry inside tub.
5
Close the lid.
• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid.
NOTE
• Before using this program remove lint inside lint filter.
• When using this program, do not place any laundry inside tub.
• After using this program, remove dirt inside filter.
• After finishing this program, open the lid of wash to remove irritant odor.
• Do not pour bleach into the tub directly. It might cause damage the tub.
• Do not leave diluted oxygenated bleach inside tub for long time.
It rusts the tub must drain the remained diluted oxygenated water out.
• Use this program once for every month.
• Do not use this program repeatedly.
Additiona l Function Program
T
21
Additional Function Program
22
A
IR DRY
1
Press the POWER (AUTO OFF) button to turn power on.
2
When you press the Air dry button for 3 seconds, the Air dry course will be
selected.
• When the Air dry is selected, other buttons will be inactive.
AIR DRY for your laundary.
• If you want to cancel the Air dry function, press the Power button.
3
Press the START/PAUSE button.
4
When the Complete buzzer goes off, the power will automatically be turned
off in 10 seconds.
NOTE
When you select Air dry foir more than 60 minutes
1) You can reduce the drying time by minimizing the moisture in the laundry.
2) Always keep the laundry amount to 2kg or less and make sure to spread it out evenly.
3)Select 60 minutes for cotton laundry and 120 minutes for synthetic fiber laundry for effective Moisture removal.
T
UB DRY
1
Press the POWER (AUTO OFF) button.
2
When you press the Wash and Rinse button simultaneously, the Tub Dry course
will be set or canceled.
• When you select the Tub Dry, do not put any laundry in the drum.
• When Tub Dry is selected, other buttons will be inactive.
3
Press the START/PAUSE button.
4
When the Complete buzzer goes off, the poser will automatically be turned off in
10 seconds.
NOTE
When you select Tub Dry
1) Use this function to minimize the growth of mold from the residual moisture within the laundry.
2) When you select the Tub Dry course, do not put any laundry or detergent in the drum.
3) It is good to use this about once a week.
23
1
2
When you only need the Wash, Wash/Rinse or Rinse cycles, these can be set manually.
Press the POWER (AUTO OFF) button to turn power on.
Only Wash
Only Rinse
Press the WASH button to Press the RINSE button to
select the desired timing.
select the desired times of
rinse.
Only Wash,Rinse
Press the WASH button to
select the desired timing.
Press the RINSE button to
select the desired times of
rinse.
Only Rinse,Spin
Press the RINSE button to
select the desired times of
rinse.
Only Spin
Press the SPIN button to
select the desired times of
spin.
Only Drain
When you want to only
drain, wait until the water
in the washing tub drains
completely.
Press the SPIN button to
select the desired times of
spin.
You can use this option
for preventing wrinkles of
laundry
3
Press the WATER button, to control the water level according to the amount
of laundry. If you do not choose anything, it is set the middle water level
automatically.
4
Add the laundry into the washing tub.
5
Press the START/PAUSE button.
6
Add the detergent and close the lid.
NOTE
• When a Wash, Wash/Rinse or Rinse only option is selected, after the wash is completed the water will not
be drained off. If you wish to drain the water, press SPIN button and wait until the water in the tub has drained
completely. Then press the START/PAUSE button.
• If you do not specify the water level, then Medium will be automatically selected.
• If only Rinse is selected, the process will start from Water Supply.
Additional Function Program
O
ption Washing
Additional Function Program
24
D
ELAY START (RESERVATION) Wash
DELAY START (RESERVATION) Wash is used to delay the finishing time of the operation.
The hours to be delayed can be set by the user accordingly.
The time on the display is the finishing time , not the start time.
1
Press the POWER (AUTO OFF) button to turn power on.
2
Press the PROGRAM button to select the washing program.
3
Press the DELAY START (RESERVATION) button.
• Select the program for laundry on the Control panel.
This program will not work in WOOL and TUB CLEAN
Program.
• The light will ‘DELAY’ turn on and
‘TIME LEFT’
will be marked.
• Press the button repeatedly to set the desired finishing time.
For example, To finish washing in 9 hours from now, by
make the number 9:00 pressing the DELAY START
(RESERVATION ) button repeatedly.
(RES.=DELAY)
4
Add the Detergent.
5
Add the laundry and press the START/PAUSE button.
• Add the appropriate quantity of Detergent as the Detergent
manufacture instruction.
• When the lid is open the machine will not operate, and an
alarm signal will remind you to close the lid
• When you press the START/PAUSE button the light will
blink.
6
Close the lid.
• Water will be supplied for 2 minutes after the start of the
wash to supplement the water the laundry has absorbed.
Finish
• The washing will be finished according to the delayed time.
NOTE
• Finishing time can be delayed from 3~48 hours. Delaying from3~12 hours can be done in 1 hour time intervals
and from 12~48 hours in 2 hour time intervals.
• If the lid is open, the machine will not work, and an alarm signal will alarm to remind you to close the lid.
• To select washing time, rinsing times, spinning time, water level, hot/cold or wash power manually, press the
DELAY START (RESERVATION) button and select the desired option. Then press the START/PAUSE button.
• When the laundry cannot be taken out immediately after the wash program ends, it is better to omit the spinning
program . (The laundry will be wrinkled if left for a long time after spinning.)
ther Useful Functions
Child Lock Function
If you want to lock all the keys to prevent settings from being changed by a child, you can use the
child lock option.
How to Lock
1
Press the POWER (AUTO OFF) button.
2
Press the START/PAUSE button to start washing.
• Turn Power on.
• After all washing conditions are set according to the manual.
3
Press both the RINSE button and the SPIN button simultaneously.
• During the wash program, all the buttons are locked
until washing is completed or it is child-lock
function is deactivated manually.
How to Unlock
If you want to unlock during wash, press both the RINSE and the SPIN button simultaneously again.
NOTE
•“
” & the remaining time are alternatively shown on the display while they are locked.
Rev.: 01
Date : 10.2013
Additiona l Function Program
O
25
Installation
26
P
1
lacing and Leveling
Please ensure that transit restraint has been removed before operating your machine.
Place the machine on a flat and firm surface which allows proper clearance.
We suggest a minimum clearance of 2 cm to the
right side and left sides of the machine for ease of
installation.
At the rear, a minimum clearance of 10 cm is
suggested.
more than 10 cm
more
than
2 cm
more than
2 cm
NOTE
If the washer is installed on a uneven,weak or tilted floor causing excessive vibration,
spin failure or “
” error can happen to it.
It must be placed on a firm and level floor to prevent spin failure.
2
Check that the machine is level
Top view of the machine
Open the lid and look from above to see if it is
same as shown.
3
Leveling the machine
Lift the front of the washing machine and twist
the Adjustable Leg until the surface bubble is
placed in the center.
Adjustable legs
Installing the Anti-Rat Cover (option) Insert the anti-rat cover to be firmly fixed from the back or
front of washing machine and screw it
Caution
If the power is supplied from a cord extension set or generator, the cord extension set or electrical
portable outlet device should be positioned so that it is not exposed to splashing or ingress of moisture.
27
C
onnecting Water Supply Hose
Connecting Water Supply Hose to water tap
Normal Type
1
(Normal tap without thread & screw type inlet hose.)
Untighten the screw
Rubber packing
Untighten the screw of the connector so that the
tap can be placed in the middle.
2
screw
Connector
Fixing the connector to the tap
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
3
Attach the water supply hose securely to the
connector
Push the water supply hose vertically upwards so
that the rubber seal within the hose can adhere
completely to the tap.
4
Connector
Water
Supply Hose
Fixing the connector to the water supply hose
Attach the water supply hose to the connector and
then tighten it by screwing it to the right.
5
Check the connection of water supply hose and the connector
After connecting the hose, open the tap to check
for any water leakage.
If the water leaks, close the tap and start again
from step 1
NOTE
The washing machine is to be connected to the water mains using new hose-sets and old hose-sets should
not be reused.
Installation
Before connecting the Water Supply Hose to the water tap, check the hose type and then
choose the correct instruction here under.
Note that the Water Supply Hose supplied may vary from country to country, Make sure to
connect the blue inlet hose to the COLD water tap, and the orange inlet hose to the HOT
water tap.
28
Installation
C
onnecting Water Supply Hose
Normal Type
1
(Normal tap without thread & one touch type inlet hose.)
Separate Middle connector from Water Supply Hose
Separate Middle connector from the Water
Supply Hose by pulling the Pressing Rod and the
Pressing Handle that is attached to the Water
Supply Hose.
Middle
connector
Fixed Sticker
Pressing Handle
Pressing Rod
Water Supply Hose
2
Loosen the fixed nuts to connect the connector to the tap
Untighten the screw of the connector so that the
tap can be placed in the middle.
Rubber packing
screw
Fixed sticker
NOTE
In case tap is too large.
Guide plate
If the tap diameter is too large or is square,
untighten the 4 screws and remove the guide
plate. Then follow step1.
3
Fixing Connectors to the Tap
Rubber packing
Connector
Push the upper connector up till the rubber
packing is in tight contact with the tap. Then
tighten the 4 screws.
4
Fixing Upper Connector and Middle Connector
Remove the fixed sticker in between the Upper
and Middle Connectors. Tighten the connectors
by holding one connector and twist middle
connector to the right.
5
Connector
Middle
Connector
Fixed sticker
Connecting Middle Connector and Water Supply Hose
Press down the pressing rod of the Water Supply
Hose which was separated from middle connector
(refer to Step1) and then join it to the middle
connector.
Pressing rod
Water Supply Hose
6
Connector
Middle
Connector
Check for water leakage
After connecting the hose, open the tap to check
for any water leakage.
If the connection leaks, close the tap and start
again from step 1.
If you skip step 1, water leakage may occur.
Pressing handle
29
Installation
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap.
Water
tap
Rubber Packing
Water Supply Hose
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then
tighten it by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check
for any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of
the washing machine, and then lock it by turning
the hose connecting part.
• Check to see if there is a rubber seal inside the
connector.
Hose connector
Rubber seal
Clip
roundin g Method
Earth wire should be connected.
If the earth wire is not connected, there is possible a danger of electric shock caused by
the current leakage .
Grounding Method with Ground insert space Terminal
If the AC current outlet has a ground terminal, then
separate grounding is not required. Note that AC power
outlet configurations may differ from country to country
Ground
Terminal
Outlet with ground terminal.
Caution
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon a dedicated circuit; that is, a single outlet circuit which powers
only that appliance and has no additional outlets or branch circuits. Check the specification page of this owner's
manual to be certain. Do not overload wall outlets. Overloaded wall outlets, loose or damaged wall outlets,
extension cords, frayed power cords, or damaged or cracked wire insulation are dangerous. Any of these
conditions could result in electric shock or fire. Periodically examine the cord of your appliance, and if its
appearance indicates damage or deterioration, unplug it, discontinue use of the appliance, and have the cord
replaced with an exact replacement part by an authorized servicer. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked, pinched, closed in a door, or walked upon. Pay particular
attention to plugs, wall outlets, and the point where the cord exits the appliance.
Other Grounding Method
Burying Copper Plate
Connect the Ground Wire to a Ground Copper
Plate and bury it more than 75cm in the ground.
Ground Wire
75cm
Ground Copper Plate
Using Ground Wire
Connect the ground Wire to the socket provided
exclusively for Grounding.
Ground
Wire
Using a Short Circuit Breaker
If grounding methods described above are not
possible, a separate circuit breaker should be
employed and installed by a qualified electrician
Short-circuit
breaker
Caution
• To prevent a possible explosion, do not connect ground to a gas pipe
• Do not connect ground to telephone wires or lightning rods. This may be dangerous during electrical
storms
• Connecting ground to plastic has no effect
• Ground wires should be connected when an extension cord is used.
Care and Maintenance
G
31
Care and Maintenance
32
C
leaning and Maintenance
Cold water washing
• If you always use COLD water, we recommend that a WARM or HOT wash be used at a regular
intervals e.g. every 5th wash should be at least a WARM one.
When you have finished
• Turn off taps to prevent the chance of flooding should a hose burst.
• Always unplug the power cord after use.
When water supply into the tub is not clean or the filter is clogged with particles (such as sand), clean the
filter in the inlet valve occasionally.
(The figure of power cord and water tap may vary according to the country)
To Clean the Filter in the Inlet Valve
1
Close the tap before turning off the power.
HOT/COLD(WARM) and then press the
[START/PAUSE] button to remove water
from the machine completely.
2
Turn off the power before
pulling out the cord.
3
After removing the water supply
hose pull out the filter.
Then use a brush to clean the filter.
4
Replace the filter after cleaning it.
NOTE
• Before cleaning the filter, the impurities in the water supply hose should be removed.
To Clean the Pump casing (for pump model)
1
Place a towel on the
floor under the drain
pump cap. Excess
water may flow out.
2
Turn the cap
counterclockwise and
pull it out.
Cap
3
Remove any foreign
objects and fluff inside
pump casing and from the
filter.
4
Filter
NOTE
• Check if water leaks after reassembling. (The Rubber ring is in the cap)
Replace the cap. Insert the filter along
the guide ribs inside the pump casing.
Filter must face the guide ribs inside
pump casing and securely turn the cap
clockwise.
Guide rib
Filter
33
When there is a fear of freezing
• Close the water taps and remove the Water Supply Hose.
• Remove the water which remains in the water supply.
• Lower the drain hose and drain the water in the bowl and the drain hose by spinning.
If frozen
• Remove the water supply hose, and immerse it in HOT water at approx.. 40˚C.
• Pour approx.. 2 liters of HOT water at approx.. 40˚C, into the bowl and let it stand for 10 minutes.
• Connect the water supply hose to the water tap and confirm that the washing machine performs the
supply and drainage of water.
Wash Inner-tub
Leave the lid open after washing to allow moisture to evaporate. If you want to clean
the inner-tub use a clean soft cloth dampened with liquid Detergent, then rinse. (Do
not use harsh or gritty cleaners.)
Inlet Hoses
Exterior
Hoses connecting washer to faucet should be replaced every 5 years.
Immediately wipe off any spills. Wipe with damp cloth. Try not to hit surface with
sharp objects.
Long Vacations
Be sure water supply is shut off at faucets. Drain all water from hoses if weather will
be below freezing.
Cleaning the Inside of your Washer
If you use fabric softener or do regular COLD water washing, it is very important that you occasionally clean the
inside of your washer.
• Fill your washer with HOT water.
• Add about two cups of a powdered Detergent that contains phosphate.
• Let it operate for several minutes.
• Stop the washer, open the lid and leave it to soak overnight.
• After soaking, drain the washer and run it through a normal cycle.
Or use TUB CLEAN PROGRAM periodically.
We do not recommend that you wash clothes during this procedure.
Products that might damage your washing machine
• Concentrated bleaches and diaper sanitizer will cause damage to the paintwork and components of your washer.
• Hydrocarbon solvents i.e. petrol, paint thinners and lacquer thinners, etc. can dissolve plastic and blister paint
(Be careful when washing garments stained with these solvents as they are flammable DO NOT put them in
washer or dryer.)
• Some pretreatment sprays or liquids can damage your washer’s control panel.
• Use of dyes in your washer may cause staining of the plastic components. The dye will not damage the machine
but we suggest you thoroughly clean your washer afterwards. We do not recommend the use of dye strippers in
your washer.
• Do not use your washer lid as a work surface.
Care and Maintenance
C
leaning and Maintenance
Care and Maintenance
34
U
se of Handle Locker
You can use handle hold function if you like to use.
Handle hold function is operated by holder under the handle.
• Slide holder to left/right side until you listen to Click sound to holding handle.
• Do opposite to loose the Handle holding.
Lock
<State of fixing handle>
Unlock
<State of unfixing handle>
NOTE
If you operate door like the below picture that, you can hurt so use after check locker was fixing or not.
35
C
ommon washing problems
WASH PROBLEM
Problems
Possible Causes
Solutions & Preventive Measures
Poor soil
removal
• Not enough Detergent
• Wash Water Temperature
too low.
• Overloading the washer
• Incorrect wash cycle
• Incorrect sorting
• Do not pretreat stain
• Use correct amount of Detergent for load size, amount of
soil and water Hardness.
• Different Water Temperature may be required according to
soil type.
• Reduce load size.
• Wash with JEAN or SOAK & JEAN wash cycle for heavy
soiled laundry.
• Separate heavily soiled items from lightly soiled ones.
• Pretreat stain and heavy soil according to directions shown
on page 9.
Blue Stains
• Undiluted fabric softener
dispensed directly onto
fabric
• Rub the stain with bar soap. Wash.
• Do not overfill fabric softener dispenser and do not pour
liquid fabric softener directly onto fabric.
See page 12 for more instructions.
Black or gray
marks on
clothes
• A buildup caused by the
interaction of fabric softener
and Detergent can flake off
and mark clothes
• Not enough Detergent
• Keep the recommendations against Scrud(waxy buildup).
(refer to scrud page12.)
• Use correct amount of Detergent for load size, amount of soil
and water Hardness.
Yellow or
brown rust
stains
• Iron or manganese in
water supply, water pipes,
or water heater
• To restore discolored load of whites, use rust remover safe
for fabric.
• Install nonprecipitating water softener or an iron filter in
your water supply system for an ongoing problem.
• Before washing, run water for a few minutes to clear lines.
Lint
• Incorrect sorting
• Tissues left in pocket
• Overloading the washer
• Wash lint givers eg towels, flannelette sheets, separately
from lint collectors eg synthetic fabrics and remove tissues in
pockets before wash. See page 9 for sorting and caring
before loading.
• Do not overload the washer
Residue or
Detergent
• Overloading the washer
• Undissolved Detergent
• Use too much Detergent
• Do not overload the washer.
• Some Detergents need to be pre-dissolved, check the Detergent
instructions. Try pre-dissolving the Detergent.
• Increase Water Temperature using HOT water safe for fabric.
• Use proper amount of Detergent.
Holes, tears,
or snags
• Incorrect use of chlorine
bleach.
• Unfastened zippers,
hooks, buckles
• Ribs, tears and broken
threads
• Overloading the washer
• Degradation of fabric
• Never pour chlorine bleach directly on fabric.
See page 11 for adding liquid bleach.
• Fasten zippers, hooks, and buckles.
• Remove objects in pockets. See page 9 for caring before
loading.
• Do not overload the washer.
Troubleshooting
Many washing problems involve poor soil & stain removal, residues of lint and scum, and
fabric damage. For satisfactory washing results, follow these instructions.
36
Troubleshootin g
Before calling for service, check the problem against the list bellows.
Symptom
Water Supply
Failure
Error Message
Check up
• Is the water tap shut off?
• Is the water supply cut off ?
• Is the tap or water supply hose frozen ?
• Is the water pressure low or is the filter of the inlet
valve clogged with impurities?
• Is the Hot hose connected to cold?
• Is the Cold hose connected to hot?
Drainage Failure
• Is the drain hose positioned correctly?
• Is the drain hose bent or placed too high?
• Is the internal part of the hose or drain pump
(only pump model) clogged with impurities?
• Check if electric power has gone off.
Spin Failure
• Is the laundry evenly balanced?
• Is the washing machine placed on a flat surface?
Door(Lid) Open
• Is the lid closed?
Coin Lock Error
• Are there any coins in between Tub and
Washing wings ?
• Are there any foreign objects ( Pin , Clip , etc.)
in between Tub and Washing wings?
Abnormal water
level sensing
• Please call your nearest LG Electronics service
center for help.
Overflow failure
Abnormal motor
I-Sensor Error
Clutching Error
Rev.: 01
Date : 10.2013
1
2
3
4
TEMP or Beeper
6
5
Smart Diagnosis is a troubleshooting feature designed to assist, not replace, the traditional method of troubleshooting
through service calls.
The effectiveness of this feature depends upon various factors, including, but not limited to, the receiption of the
cellular phone being used for transmission, any external noise tha t may be present during the transmission,
and the acoustics of the room where the machine is located.
Accordingly, LG does not guarantee that Smart Diagnosis would accurately troubleshoot any given issue
38
B
Troubleshootin g
lanket Folding Method
The blanket and Large size cloth washing method
The Clothes should not exceed 160x200 cm (WidthxLength)
Blanket folding method before washing
1 Fold the blanket in half along the length.
2 Fold the blanket into 3 parts, by a left-width around 30 cm.
30 cm.
3 Roll the blanket before put in the tub .
4
When input the clothes in the tub, the clothes should not over
balance lower (Red line) otherwise, it may cause damage to the blanket.
Limited of the clothes
The Clothes don’t over this line.
erms of Warranty
What Is Not Covered:
• Service trips to your home to teach you how to use the product.
• If the product is connected to any voltage other than that shown on the rating plate.
• If the fault is caused by accident, neglect, misuse or Act of God.
• If the fault is caused by factors other than normal domestic use or use in
accordance with the owner's manual.
• Provide instruction on use of product or change the set-up of the product.
• If the fault is caused by pests for example, rats or cockroaches etc..
• Noise or vibration that is considered normal for example water drain sound, spin
sound, or warming beeps.
• Correcting the installation for example, levelling the product, adjustment of drain.
• Normal maintenance which recommended by the owner's manual.
• Removal of foreign objects / substances from the machine, including the pump and
inlet hose filter for example, grit, nails, bra wires, buttons etc.
• Replace fuses in or correct house wiring or correct house plumbing.
• Correction of unauthorized repairs.
• Incidental or consequential damage to personal property caused by possible defects
with this appliance.
• If this product is used for commercial purpose, it is not warranted.
(Example : Public places such as public bathroom, lodging house, training center,
dormitory)
If the product is installed outside the normal service area, any cost of transportation
involved in the repair of the product, or the replacement of a defective part, shall be
borne by the owner.
Terms of Warranty
T
39
S
pecification
Specification
40
H
D
W
Model
Water tab pressure
Weight
Wash capacity
Dimensions
WFT1161DD
WFT1061DD
30 - 800 kPa (0.3 - 8.0 kgf/cm2)
30 - 800 kPa (0.3 - 8.0 kgf/cm 2 )
43.5 kg
43.5 kg
11.0 kg
10.0 kg
590 x 606 x 992 mm
In our continuing effort to improve the quality of our appliances, it may be necessary to make
changes to the appliance without revising this manual.
M emo
M emo
Download PDF