LG V9822W Owner's manual

LG V9822W Owner's manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V9822W
PAL
Before
adjusting this product,
booklet carefully and
connecting, operating
please read
completely.
this instruction
or
Notes
CAUTION
It is forbidden
RISK OF ELECTRIC SHOCK
DO NOT OPEN
via cable,
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
DO NOT REMOVE COVER
copyrights:
on
(OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
This
lightning flash with arrowhead symbol within
an equilateral triangle is intended to alert the user
to the presence of uninsulated dangerous voltage
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
law to copy, broadcast, show, broadcast
in public, or rent copyright material without
by
play
permission.
This product features the copy protection function developed
by Macrovision. Copy protection signals are recorded on
some discs. This product incorporates copyright protection
technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by
Macrovision Corporation and other rights owners. Use of this
copyright
protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE
The exclamation mark within
an
equilateral
trian-
gle is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: Do not install this
such
as a
book
case or
equipment
in
a
confined space
WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO
BE DISPLAYED IN THE PICTURE. IN CASE OF 625 PROGRESSIVE SCAN PICTURE
MENDED THAT THE USER SWITCH THE CONNECTION TO
THE 'STANDARD DEFINITION' OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY
WITH THIS MODEL
similar unit.
PROBLEMS, IT IS RECOM-
625p
DVD
PLAYER, PLEASE CONTACT
OUR CUSTOMER SERVICE CENTER.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
SERIAL NUMBER: The serial number is found
of this unit. This number is
on
the back
able to others. You should
unique to this unit and not availrecord requested information here
and retain this
permanent record of your pur-
guide
as a
chase.
Model No.
Serial No.
___________________________________
___________________________________
CAUTION:
This
Player employs a Laser System.
To ensure proper use of this product, please read this
owner's manual carefully and retain for future reference,
should the unit require maintenance, contact an authorized
service location-see service procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazDigital
Video Disc
ardous
beam,
do not
try
This unit
front
2.
or
such
vases, shall be
as
splashing
and that
dripping
no
placed
on
the
panel
to turn
are
helpful
on
the remote control
on
this unit.
on
the remote control when
you want to control the DVD.
The DVD indicator will light on the front
display
3.
apparatus.
panel
VCR Button
on
the remote control when
you want to control the VCR.
The VCR indicator will light on the front
display
panel
to show that the VCR is selected.
DVD/VCR Button
Press the DVD/VCR button
toggle
2
or
to show that the DVD is selected.
Press the VCR button
4.
in
DVD Button
Press DVD button
not be
exposed to water,
objects filled with liquids,
operate both
POWER Button
Press the POWER button
WHEN OPEN AND INTERLOCKS DEFEATED.
apparatus shall
set of controls to
following buttons
successfully controlling each part.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
CAUTION: The
uses one
DVD and VCR. The
to open
the enclosure. Visible laser radiation when open. DO NOT
STARE INTO BEAM.
this
controlling
unit
1.
radiation exposure.
To prevent direct exposure to laser
notes on
Important
on
the front
panel
control between the DVD and the VCR.
to
Contents
PlayingaDVDorVideoCD...............27-29
Introduction...................4
SymbolUsedinthisManual...............4
AbouttheSymbolDisplay..............4
NotesonDiscs..........................4
HandlingDiscs........................4
StoringDiscs.........................4
CleaningDiscs........................4
TypesofPlayableDiscs...................5
Regionalcode..........................5
Disc-relatedterms.......................6
FrontPanel.............................7
DisplayWindow.........................7
RemoteControl.........................8
RearPanel.............................9
GeneralFeatures.......................27
MovingtoanotherTITLE................27
.27
Moving to another CHAPTER/TRACK
.
.
.
.
.
Search.............................27
.27
ChangingtheAudioChannel
Still Picture and Frame-by-Frame Playback
.28
SlowMotion.........................28
Random............................28
.
.
.
.
.
.
.
.
.
.
.
.
.
RepeatA-B.........................28
Repeat.............................28
3DSurround.........................28
TimeSearch.........................28
Zoom..............................29
MarkerSearch.......................29
SpecialDVDFeatures...................29
TitleMenu..........................29
DiscMenu..........................29
InstallationandSetup
.
.
.
.
.
.
.
.
.10
.
CameraAngle.......................29
.29
ChangingtheAudioLanguage
.
Connecting to a TV & Decoder (or Satellite) .10
.11
Connecting to Optional Equipment
.12-16
BeforeOperation-VCRpart.
.12
Tuning in a video channel on your TV
.12
Using your VCR for the very first time
.13
SettingtheclockManually.
Tosetthecoloursystem..............13
.14
Howtousingthemainmenu.
.14
Tuning in TV Stations Automatically
.15
TuninginTVStationsManually
.16
Changing the order of TV Stations
DeletingTVstations..................16
.17-21
BeforeOperation-DVDpart.
On-ScreenDisplay......................17
InitialSettings.......................18-21
GeneralOperation....................18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
LANGUAGE.........................18
MenuLanguage....................18
DiscAudio/Subtitle/Menu.
.18
DISPLAY...........................19
.
.
.
.
.
.
.
.
.
.
TVAspect.........................19
DisplayMode.......................19
ProgressiveScan...................19
TVOutputSelect....................19
AUDIO.............................20
.20
DolbyDigital/DTS/MPEG.
.20
SampleFreq.(Frequency).
.20
DynamicRangeControl(DRC).
Vocal.............................20
OTHERS...........................21
PBC.............................21
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
AutoPlay..........................21
DivX(R)VOD.......................21
LOCK(ParentalControl)................22
Rating............................22
.22
Password(SecurityCode).
.
.
.
.
.
.
.
.
.
.
.
AreaCode.........................22
.
.
.
.
.
.
.
.
.
Subtitles............................29
.30
PlayinganAudioCDorMP3/WMADisc
AudioCDandMP3/WMADiscFeatures
.31
Pause..............................31
.
.
.
.
.
.
.
.
.
.
.
MovingtoanotherTrack................31
RepeatTrack/All/Off...................31
Search.............................31
Random............................31
RepeatA-B.........................31
3DSurround.........................31
ProgrammedPlayback.....................32
.32
RepeatProgrammedTracks.
.32
ErasingaTrackfromProgramList
.32
Erasing the Complete Program List
ViewingaJPEGDisc......................33
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow..........................33
StillPicture..........................33
MovingtoanotherFile.................33
Zoom..............................33
Torotatepicture......................33
To listen to MP3/WMA music watching picture
.33
.34
PlayingaDVDVRformatDisc.
.
.
.
.
.
.
.
.
.
.
.
.
.
MaintenanceandService.................34
PlayingaDivXMovieDisc................35
Additional Features-VCR
part
.
.
.
.
.
.
.
.
.
.36-37
.
OnScreenDisplay....................36
TapeCounterMemoryStop.............36
Lock(ChildLock).....................36
.36
VideoDoctor(Self-Diagnosis).
Hi-FiStereoSoundSystem.............37
.
.
.
.
.
.
.
.
.
.
AdditionalFeatures.....................38
LastSceneMemory...................38
ScreenSaver........................38
VideoModeSetting...................38
Controlling other TVs with the remote control 38
CopyingfromDVDToVCR................39
.39
Recording from another video recorder
.
.
.
.
Operation....................23
Reference....................40
Playingatape.......................23-25
.23
CM(CommercialMessage)Skip
OPR (Optimum Picture Response)
.23
.24
InstantTimerRecording(ITR).
Timer recording using On Screen Display .25-26
LanguageCodes.......................40
CountryCodes.........................40
Troubleshooting........................41
Specification..........................42
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3
Introduction
To
proper use of this product, please read this
owner's manual carefully and retain for future
ensure
DVD video disc.
Notes
on
Discs
reference.
This manual
provides
information
on
the
Handling
operation
and maintenance of your DVD player. Should the unit
require service, contact an authorized service location.
Symbol
Discs
Do not touch the
disc. Hold the
disc
do not
by
playback side of the
edges so that fingerprints
the
the surface. Never stick paper
or
tape
on
get
on
the disc.
Used in this Manual
The
lightning flash symbol alerts you to the
presence of dangerous voltage within the
product enclosure that may constitute a risk
of
electric shock.
The exclamation
point alerts you to the
presence of important operating and
maintenance / servicing instructions.
Indicates hazards
unit itself
or
likely
to
other material
cause
harm to the
damage.
Storing Discs
After playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center out.
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
is
applicable only
symbol.
DVD
VCD
CD
MP3
WMA
making
of the
following symbols
represented by the
one
to the disc
the task easier.
Do not
strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
use
spray intended for older
Selecting
DVD and finalized DVD±R/RW
the
You must select
Video CDs
VCR)
Audio CDs
to view
on
vinyl
records.
Viewing Source
of your output
the TV screen.
one
sources
(DVD
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
or
?
MP3 Discs
and
WMA Discs
output
source
of DVD deck is viewed
on
the TV
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights
screen.
?
JPEG
DivX
JPEG Discs
and
DivX Discs
output
source
of VCR deck is viewed
on
the TV
lights
screen.
Notes:
?
About the
"
"
Symbol Display
automatically.
may appear
your TV display during
operation and indicates that the function explained in
on
this owner's manual is not available
4
on
If you insert a disc while the DVD+VCR is in the
VCR mode, the DVD+VCR will switch to DVD mode
that
specific
?
If you insert a cassette tape without prevention tab
while the DVD+VCR is in the DVD mode, the
DVD+VCR will switch to VCR mode
automatically.
Types
of
Playable
Discs
Regional
code
This DVD
player
is
designed and
playback of region
DVD
manufactured for
(8cm/12cmdisc)
encoded DVD software. This unit
only
Video CD
(VCD)
(8cm/12cmdisc)
DVD discs labeled "2"
Notes
Audio CD
?
(8cm/12cmdisc)
on
Regional
play
can
"ALL".
clearly
a
globe
visible
on
with
the
one or more
cover.
This number must match your DVD
code or the disc cannot play.
addition, this unit plays DivX file, DVD -R, DVD +R,
DVD -RW, DVD +RW, SVCD, and CD-R / CD-RW that
contains audio titles, MP3, WMA, and/or JPEG files.
2
Codes
Most DVD discs have
numbers in it
or
"2"
player's regional
In
This indicates
?
If you try to play a DVD with a different region code
from your player, the message "Check Regional
Code" appears
on
the TV
screen.
product feature that is
capable of playing DVD-RW discs
recorded with Video Recording format.
a
Notes:
?
Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD -R, DVD +R,
DVD -RW, DVD +RW) disc itself, some CD-R/RW
(or DVD -R, DVD +R, DVD -RW, DVD +RW) discs
cannot be played on the unit.
?
Do not attach any seal or label to either side
labeled side or the recorded side) of a disc.
?
Do not
irregularly shaped CDs (e.g.,
heart-shaped or octagonal) since they may
(the
use
result in
malfunctions.
Notes
on
DVDs and Video CDs
Some
playback operations of DVDs and Video CDs
may be intentionally programmed by software
manufacturers. This unit plays DVDs and Video CDs
according to disc content designed by the software
manufacturer, therefore some playback features may
not be available
or
other functions may be added.
Manufactured under license from
Dolby
Laboratories.
are
"Dolby" and the double-D symbol
trademarks of Dolby Laboratories.
DTS and DTS
Digital Out are
Digital Theater Systems, Inc.
trademarks of
5
Disc-related terms
PBC:
DVD±R/DVD±RW
version 2.0 disc formats. PBC allows you to interact
with the system via menus, search functions, or other
DVD -R and DVD +R
are
Playback Control (Video CD only)
Playback control is available for Video CD (VCD)
two different standards for
recordable DVD drives and discs. This format allows
information to be recorded onto the DVD disc
DVD +RW and DVD -RW
once.
re-writable
4.38
two standards for
are
media, meaning the DVD
erased and re-recorded.
Gigabytes
much. There
only
Single-sided
content
discs
can
can
be
hold
and double-sided discs hold twice
are no
dual
layer single
as
sided recordable
discs.
VCD
A VCD holds up to 74 minutes (650 MB disc) or 80
minutes (700 MB disc) of MPEG-1 full-motion video
with
quality
CDs.
Title
(DVD video discs only)
A title is generally a distinct section of a DVD disc. For
example the main feature could be title 1, a documentary describing how the film was made could be title 2,
and cast interviews could be title 3. Each title is
(Video CD)
along
typical computer-like operations. Moreover, still
pictures of high resolution can be played if they are
included in the disc. Video CDs not equipped with
PBC (Version 1.1) operate in the same way as audio
assigned
easily.
a
reference number
enabling
stereo sound.
Chapter (DVD video discs only)
A chapter is a segment of a title such
MPEG
MPEG is
an
you to locate it
international standard for video and audio
compression. MPEG-1 is used in encoding video for
VCD and provides for multichannel surround sound
coding such as PCM, Dolby Digital, DTS and MPEG
film
or one
interview in
a
series. Each
as a scene
chapter
in
a
is
assigned a chapter number, enabling you to locate the
chapter you want. Depending on the disc, chapters
may not be recorded.
audio.
Scene
MP3
On
MP3 is
audio
popular compression format used for digital
files that yields very high near-CD quality.
a
WMA
Windows media audio file. A
developed by
Microsoft
type of coding / decoding
(VCD)
video CD with PBC
(playback control) functions,
moving pictures and still pictures are divided into
sections called "scenes". Each scene is displayed in
the menu screen and assigned a scene number,
enabling you to locate the scene you want. A scene is
composed of one or several tracks.
a
Corp.
Track
JPEG
A distinct element of audiovisual
Joint Pictures
Expert Group.
file format that allows you to
on the number of colors.
JPEG is
save
compressed
images with no limit
a
information, such
the
picture or sound track for a specific language
(DVD), or a musical piece on a video or audio CD.
Each track is assigned a track number, enabling you
to locate the track you want. DVD discs allow
DivX
track of video
DivX is the
name
which is based
on
of
a
the
revolutionary
new
MPEG-4
standard for video.You will be able
movies
6
using
this DVD
player.
new
video codec
compression
to play DivX
as
of audio.
(with multiple angles)
one
and several tracks
Front Panel
POWER
Switches the unit to ON
OFF.
or
Reverse
Go to
Skip/Scan, Rewind (
)
beginning of current chapter/track or
Press and hold for two seconds for
Rewinds the
Disc
Starts
fast
reverse
chapter/track.
search.
tape.
Tray
PLAY
a
to PREVIOUS
Insert
disc here.
a
( G)
playback.
Forward
Go to
Skip/Scan, Fast-Forward (
NEXT chapter/track.
Press and hold for two seconds for
Winds the
a
)
fast forward search.
tape forwards.
STOP
A
(
Tape Eject
) Stops playback.
DVD OPEN/CLOSE
Opens
Display
or
(
Tape Compartment
)
closes the disc
DVD/VCR Selector
tray.
Audio IN
window
(L/R)
Shows the current status of the unit.
Jacks
Video IN Jack
Remote Sensor
Point the remote control here.
Channel
Programme
Selectors.
Display Window
Child Lock is
Indicates
Indicates the
engaged
repeat mode.
DVD+VCR is in timer
timer
recording
Progressive
VCR deck is selected.
VCR
A disc is loaded in the DVD deck.
when
a
disc is loaded in the
DVD deck and flashes when
no
or a
A Cassette is in the VCR deck.
Scan is set to On mode.
(Lights
is
recording
programmed.
recording
is
engaged.
DVD to VHS copy is in progress.
disc is
Indicates TV mode.
loaded.)
(See
Notes
on
page
24.)
DVD deck is selected.
DVD
VCR
P
REC
TV
Indicates total
playing time/elapsed
time/current time
7
Remote Control
POWER
Switch this unit ON or OFF.
DVD/VCR select button
Selects operational mode of
remote control.
OPEN/CLOSE
EJECT
Open or close the the disc
-
(see
VCR: Rewinds the
STOP
mode, for fast
search and
the STOP
TV VOL +/--:
tape during the
reverse
( )
Pause playback temporarily /
press repeatedly for frame-byframe playback.
PLAY (G)
Starts playback.
STOP(A)?
Stops playback.
?
Access
the
with PBC.
?
?
?
?
?
ENTER/OK
menu selection.
Play
video CD
language (DVD).
language.
ANGLE
LOCK
into
input sources
(Child Lock)
on
tape.
and off.
TITLE
the title
menu
of the disc if
available.
?
PROGRAM
Access
?
or remove
MARKER
Mark any point
menu.
program
?
Repeat sequence.
recording speed of
?
tape.
RANDOM/CM SKIP
tracks in random order.
CM SKIP
?
-
-
during playback.
SEARCH
Display
?
-
audio
subtitle
a
Display
DISC MENU
of a DVD disc.
the
an
Switch the Child Lock
-
Select the
a
REC/ITR
Record your
-
-
of
?
Select channel programme of VCR.
To adjust tracking.
To control vertical tremble during
picture still.
-
menu
Select DVD camera angle if available
?
ZOOM
Enlarge video image.
menu
A-B/LP
menu.
SUBTITLE
Select
PR/TRK(+/-)
menu
setup
AUDIO
Select
FGDE(left/right/up/down)
Access
off TV sound.
or remove
Displays
counter.
Acknowledge
on or
TV's volume.
RETURN
DISPLAY
CLK/CNT
Access the On-Screen Display.
Shows you the current time or
-
source.
SETUP/ i
?
item in the
off the TV.
SKIP(./>)
Go to next chapter or track. Returns to
beginning of current chapter or track
or go to previous chapter or track.
search.
an
Adjusts
MUTE: Turns
picture
Advances the tape during
mode, fast forward picture
Select
recording
TV PR +/--: Selects TV's channel.
forward.
PAUSE/STEP
on or
TV AV: Selects the TV's
(m/M)
-
for
38)
p.
TV POWER: Turns
BACKWARD / FORWARD
or
source
TV Control Buttons
TV/VCR
Switch between your TV's tuner
and the VCR's internal tuner.
DVD: Search backward
Tape Eject.
AV
Select input
into tape.
0-9 numerical buttons
Select numbered items in a menu.
-
tray.
-
MARKER SEARCH
menu.
CLEAR
Clear
track number on the
program menu or a mark on the
a
MARKER SEARCH menu.
Reset tape counter to zero.
?
REPEAT
Repeat chapter, track, title, all.
-
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
mix different
Detach the
battery
of the remote
new
batteries and
types of batteries such
dard, alkaline, etc.
8
installation
and
press the buttons.
Do not mix old and
battery
never
as
stan-
AAA AAA
batteries
cover on
the
control, and insert
(size AAA)
aligned correctly.
with
and
rear
two
Rear Panel
AERIAL
Connect the aerial
this
using
jack.
AUDIO IN
Receive
(Left/Right) (VCR IN AV1)
the audio signals from an external
source
to VCR.
AUDIO OUT
Connect to
(Left/Right) (DVD/VCR OUT)
an amplifier, receiver or stereo system.
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
(Y
Pb
Pr)
OUT)
TV with Y Pb Pr
inputs.
AUDIO OUT
Connect to
(Left/Right) (DVD EXCLUSIVE OUT)
an amplifier, receiver or stereo system.
AC Power Cord
Connect to
a
power
source.
OPTICAL
(Digital audio out jack)
(DVD EXCLUSIVE OUT)
Connect to digital (optical) audio equipment.
S-VIDEO OUT
Connect to
a
(DVD
EXCLUSIVE
TV with S-Video
OUT)
input.
COAXIAL
Connect
(Digital audio out jack) (DVD EXCLUSIVE OUT)
to digital (coaxial) audio equipment.
VIDEO OUT
Connect to
VIDEO IN
(DVD/VCR OUT)
a TV with video inputs.
(VCR
IN
Receive the video
AV1)
signals
from
an
external
source
to VCR.
RF.OUT
Connect to your TV
using
this
jack.
Do not touch the inner
panel. Electrostatic
damage to the unit.
pins of the jacks on the rear
discharge may cause permanent
9
Installation and
Setup
Progressive
Tips:
If your television is
high-definition or "digital ready"
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
resolution possible.
your TV and other equipment you
wish to connect, there are various ways you could
connect the unit.
Depending
on
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect this unit's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 11.
Caution:
Make
this unit is connected
Set the TV to the correct video
directly to the
input channel.
Do not connect this unit's AUDIO OUT
in
phono
jack (record deck)
Connecting
Make
jack
of your audio
TV.
system.
to a TV & Decoder
of the
following connections, depending
on the capabilities of your existing equipment.
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's input to COMone
PONENT VIDEO.
When using the S-VIDEO OUT
input to S-VIDEO.
Basic connection
1.
1.
jack,
set the TV'
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
sponding
jacks on the DVD Player to
jacks on the TV using the Y
in
the
corre-
Pb Pr cable.
Connect the Left and
DVD
Player
using
to the
a
If your TV does not accept the Progressive Scan
format, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
2.
sure
Scan connection
Right AUDIO OUT jacks of the
audio left/right in jacks on the TV
to the
the audio cables.
Notes:
Progressive to "On" on the setup
progressive signal, see page 19.
Set the
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
or
menu
for
analog
video
S-VIDEO
connection.
Rear of this unit
(DVD
exclusive out
connection)
s
(AV)
Connect the VIDEO
OUT to the video in
on
this unit's DVD/VCR
on
the TV
Right
AUDIO
jack
jack
using
the video
cable.
2.
Connect the Left and
unit's DVD/VCR OUT to the audio
on
the TV
using
the audio cables.
Basic connection
1.
jacks of this
left/right in jacks
(RF)
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
Rear of TV
AERIAL
VIDEO
INPUT
COMPONENT VIDEO INPUT
/PROGRESSIVE SCAN
of this unit.
2.
Connect the
RF.OUT
jack
Pr
supplied
on
the
television's Antenna
Pb
AUDIO INPUT
S-VIDEO INPUT
Y
RF antenna cable from the
panel
Input.
rear
of this unit to your
DVD exclusive out connection
Component Video (Color Stream )
1.
connection
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT
corresponding
in
jacks on the DVD Player
jacks on the TV using the
to the
Y Pb Pr cable.
2.
Connect the Left and
Right
AUDIO OUT
the DVD
the TV
Player to the audio left/right
using the audio cables.
in
jacks of
jacks on
S-Video connection
Rear of this unit
1.
Connect the S-VIDEO OUT
S-Video
input jack
on
the
jack on this unit to the
TV using the S-Video
cable.
2.
Connect the Left and
the DVD
the TV
10
Right
AUDIO OUT
Player to the audio left/right
using the audio cables.
in
jacks of
jacks on
(Basic connection)
Note:
If the TV has
with the S-video cable.
input, connect the DVD player
When using an S-video cable, do
not connect the
video cable.
an
S-video
yellow
Connecting
to
Optional Equipment
Connecting to an amplifier equipped with
channel analog stereo or Dolby Pro Logic
II/Pro Logic
two
Connect the Left and
this
Right
and right
unit to the audio left
er, receiver
or
AUDIO OUT
stereo
jacks
on
in
jacks on your amplifisystem, using the audio cables.
Notes:
If the audio format of the
the
capabilities of
produce a strong,
To
see
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
Connecting to an amplifier equipped with two
channel digital stereo (PCM) or to an Audio/
Video receiver equipped with a multi-channel
decoder (Dolby DigitalTM, MPEG 2 or DTS)
Connect this unit's DIGITAL AUDIO OUT
1.
jack
(COAXIAL or OPTICAL) to the corresponding in
jack on your amplifier. Use a digital (coaxial or
optical) audio cable.
2.
You will need to activate this unit's
"AUDIO"
(See
Digital
on
page
digital output.
20).
Multi-channel sound
A
digital multi-channel connection provides the best
sound quality. For this you need a multi-channel
Audio/Video receiver that
supports
one or more
of the
audio formats
supported by your unit (MPEG 2, Dolby
DTS). Check the receiver manual and the
Digital and
logos on the
front of the receiver.
Warning:
Due to the DTS
output will be in
Licensing agreement, the digital
DTS digital out when DTS audio
stream is selected.
Rear of this unit
2 channel
analog
stereo
Both DVD and
or
Dolby
Pro
Logic
II / Pro
Logic
connection
Digital
DVD exclusive out
VCR out
multi-channel
connection
(DVD exclusive
out connection)
COAXIAL
AUDIO INPUT
DIGITAL INPUT
OPTICAL
DIGITAL INPUT
Amplifier (Receiver)
11
Before
in
Tuning
Operation-VCR part
video channel
a
on
your TV
Notes:
The
output frequency of this video recorder (VCR)
RF
CHANNEL
36
is set at UHF channel 36. If channel 36 is
used
another TV
by
torted, you
station,
if the
or
already
picture is dis-
7.
change
8 will show you how
your VCR. Stages 5
change the output frequency of your VCR.
to
~
8.
Your TV receives
from the video recorder
signals
channel number
Select
a
TV channel number
I
Press
your TV and tune it in so that
you may watch video tapes. If you have used a
AUDIO and VIDEO cables then your TV should
on
Make
VCR
have finished.
Tune this channel
appears.
Store this channel
video channel built into
that you have correctly installed your
described earlier in this book.
sure
as
Press POWER to turn
Turn
2.
your VCR.
your TV.
on
Insert
on
a
video
tape into your VCR
and press N on the remote control.
Select a TV channel number on which you wish to
watch video's. Don't worry if you don't have a
VCR
to
play
ing video playback
bright blue screen.
3.
at this
and continue
on
stage!
stages
3
If you switch your
4, instead of see-
~
tune your TV until you
Tune this channel until the video
Make
that you have correctly installed your VCR
and successfully tuned in a dedicated video channel
your TV. If you do not tune in a dedicated video
channel on your TV you will be unable to view and
record video tapes!
picture
see a
is
sharp
Using
your VCR for the very first
time
Following picture will display on the TV screen
when you have just connected your video
tuning
3 to 4
shown "ACMS"
playback
Store this channel
on
already pre-tuned
for
as
TV
stations, please follow stages
(see p.14).
your TV.
your TV.
You will need to look at the TV instruction book if
on
ACMS
8 if you cannot
obtain clear video playback as described in
Only
carry out
1
stages
4. Select
~
a
5
~
TV channel number
on
which you wish to watch video's.
Make sure that your VCR is in standby pressing
POWER on the remote control (only the clock will
be
displayed).
Press
more
PROG.(3/4)
on
the front of your VCR for
than 4 seconds.
RF36 will appear in the display window.
The following picture will be displayed on the TV
screen.
screen
sure
To make
video
blue
your TV.
If you have used a AUDIO and VIDEO cables you
will not have to tune your TV, simply select the AV
stages
12
bright
Note:
you do not know how to do this.
6.
a
recorder for the very first time.
optimum
5.
on
that
and the sound is clear.
channel. The AV channel is
4.
so
on
pre-recorded
video-tape
which you wish to
the front of your VCR when you
.
1.
on
a
on
already have a dedicated
it, usually called AV
to select another video
watch video's.
like another TV station. You have to select
(VCR)
PROG.(3/ 4)
channel. You may select any channel number
between 22 and 68.
the transmitter channel of
can
Press
Pr-12
ACMS
Setting
the clock
Manually
The clock in your VCR controls time and date
settings for your VCR.
1.
Press i.
Press 1
or
2 to select SET.
Press OK.
To set the colour system
1.
Press i.
2.
The main
3.
Press 1
or
2 to select the SYS and press OK.
4.
Press 3
or
4 to select
menu
will appear
on
the TV
according
screen.
to the COLOUR
system used.
HHMMDDMMYY
:.
-
-
--
--
--
---
.
SET
fOSD
ON
OFF
2.
Use the v
or
V on
the remote control to alter the
HOURS, MINUTES, DAY, MONTH and YEAR.
5.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The
of the week will appear
when you enter the year.
day
Press 1
or
2 to select the RF AUDIO.
Press 3
or
4 to select
:.
00101
.
automatically
fOSD
ON
OFF
SAT
6.
SET
3.
If you make a mistake press 1
correct details.
4.
Press i.
to the RF AUDIO
used.
HHMMDDMMYY
8
according
or
Press i to
remove
the
menus
from the TV
screen.
2 and enter the
13
How to
using
This VCR
easily be programmed by using
displayed on screen.
the
menu
can
menus
The
the main
controlled from the Remote
menus are
Control Handset.
1.
Switch
your TV set and video recorder
the POWER button.
on
pressing
2.
by
menu
will appear
on
the TV
If the TV broadcast
is weak your VCR may
not detect the necessary information and will not
be able to store them correctly. To overcome this
problem please
section
Press i button.
The main
Tuning in TV Stations
Automatically
on
signal
turn to the MANUAL TUNING
page 15.
1.
Press POWER to turn
2.
Press i button.
on
your DVD+VCR.
screen.
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
Press OK.
SET
SYS
fOSD
ON
OFF
ACMS
Pr-12
SET
REC
Timer
recording setting (see p. 25).
PR SET Manual tuning setting (see p. 15).
ACMS ACMS (Automatic Channel Memory
System) (see p. 14).
SET Date & clock setting (see p. 13).
SYS To set the Colour TV System (see p. 13).
(Dr.) To check a problem with your VCR
(see p. 36).
F.OSD ON/OFF To display the operational
-
Pr-12
fOSD
ON
OFF
Pr-12
ACMS
-
-
3.
Press OK
again
to start the automatic
tuning
process.
-
-
-
01
C02
00
PR-01
02
C03
00
PR-02
03
C04
00
PR-03
-
mode of your VCR
(see
(OPR)
NIC
-
-
To
improve
(see p. 23).
To activate
sound
(see
or
p.
p.
S
36).
the
Pr-12
ACMS
playback picture
deactivate the NICAM
digital
37).
Tip:
You
3.
change the menu language on the DVD setup
(See the Menu Language on page 18.)
can
menu.
Press 1 and 2 to select the desired
Press OK and press 3
4.
14
Press i to
remove
the
or
menu.
4 to select.
menus
E
from the TV
screen.
4.
The TV STATION TABLE will appear when
is completed.
Press i to
save
your
settings.
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
PR-07
08
C09
00
PR-08
PSET
R
MOVE
:
DELETE
:
,
tuning
in TV Stations
Tuning
In certain
of the
areas
Manually
country broadcast signals
CH
04
C04
may be too weak for your DVD+VCR's automatic
tuning process to find or assign TV stations
PR
:
AV
PSET
R
You must tune in these weaker broadcast stations
in order for your DVD+VCR to store
6.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
Press 2 to select STATION
so
that you may
name
your TV station.
Press OK.
them.
1.
STATION
CHANNEL/CABLE
correctly.
manually
MFT
7.
screen.
Use 3
or
station
name.
Use 1
Press OK.
or
4 to select letters and numbers for the
2 to
move
back and forth between
characters.
Press OK.
PR
CH
01
MFT
STATION
00
PR-03
Pr-12
ACMS
SET
SYS
fOSD
CHANNEL/CABLE
ON
OFF
:
AV
PR
CH
MFT
04
C04
00
STATION
PSET
R
2.
PSET
R
Press i.
The station table will appear.
3.
Press 3
8.
Press
i, confirm the station placement.
4 to select the programme number that
you want to tune (for example, PR 04).
or
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
05
06
07
08
PSET
R
MOVE
:
DELETE
:
PR
CH
MFT
04
C04
00
STATION
PSET
R
If you wish to
stages 3 8.
,
tune other stations
manually
repeat
-
4.
Press OK.
01
C01
00
PR-01
02
C02
00
PR-02
Press AV to select C
03
C03
00
PR-03
(Standard stations)
or
S
05
(Cable stations):
C02
-
C69, S01
06
-
07
S41.
08
Enter the channel number of station that you want
to
tune,
use 3 or
4 to find the
required
PSET
R
--
--
-----
--
--
-----
--
--
-----
--
--
-----
MOVE
:
DELETE
:
,
station.
9.
Press i
Your
again.
new
TV station has
now
been tuned into your
DVD+VCR.
PR
CH
MFT
04
--
STATION
----
CHANNEL/CABLE
:
AV
P SET
R
5.
Searching
will
stop when it locates
a
stations.
Press 2 to select MFT.
Control the fine
tuning
of the station
by using
3 or
4.
15
the order of TV Stations
Changing
After
tuning TV stations into your VCR you may
wish to change the order in which they are
stored without having to retune them against!
The instructions given on this page will show you
how you can simply move them into your desired
order.
1.
After
TV stations into your VCR you may
wish to delete a station.
tuning
how you
stations.
1.
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
delete any unwanted TV
Press i.
Press 1
Press i.
easily
can
The main
The main
Stations
Deleting TV
will appear on the TV
2 to select the PR SET.
menu
or
screen.
Press OK.
screen.
Press OK.
PR
CH
MFT
STATION
00
PR-03
01
Pr-12
SET
ACMS
SYS
fOSD
PR
CH
01
MFT
STATION
00
PR-03
CHANNEL/CABLE
ON
OFF
:
AV
PSET
R
Pr-12
ACMS
SET
SYS
fOSD
CHANNEL/CABLE
ON
OFF
:
AV
P
SET
R
2.
2.
Press i.
3.
Press 3
Press i.
Press 3
or
you want to
Press 2.
(for example,
PR
4 to select the programme number
you want to delete.
4 to select the programme number
move
or
03).
02
C02
00
PR-02
03
C04
00
PR-04
04
05
01
C01
00
PR-01
01
C01
00
PR-01
06
02
C02
00
PR-02
02
C02
00
PR-02
07
03
04
05
06
07
08
C04
PR-04
04
00
--
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
-----
08
PSET
R
MOVE
:
DELETE
:
08
C04
00
--
C03
--
--
--
-----
--
--
-----
00
--
--
-----
--
--
-----
PSET
R
01)
PR-03
--
--
-----
--
--
-----
--
--
-----
PSET
R
PR
-----
PR-04
4.
,
(for example,
MOVE
:
DELETE
:
,
Press 1.
After
a
short
while, the selected station will be
deleted.
3.
Press 3
4 to select the programme number
you want to move to (for example, PR 05).
or
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
--
--
If you wish to delete other TV stations
stages 3 4.
-
02
03
07
08
04
05
--
--
-----
--
--
-----
--
--
-----
06
07
08
PSET
R
4.
5.
The selected programme will be moved to the
new programme number.
move
other TV stations
repeat
-
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
04
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
5.
16
Press i to
remove
--
C03
the
00
PR-04
--
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Press i to
remove
00
PR-03
--
--
-----
--
--
-----
--
--
-----
--
--
-----
PSET
R
Press OK.
If you wish to
stages 1 4.
C02
-----
05
06
repeat
the
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Before
Operation-DVD part
On-Screen
You
Display
the
general playback status on
screen. Some items can be changed using the
To use the on-screen display:
display
can
Press DISPLAY
1.
The selected item is
Press b / B to
3.
an
inputting
Items
the
change
the title
Chapter
setting. You can
appropriate (e.g.
For
number).
some
also
If
no
functions,
provide
Playback
Title
A-B
1/9
1/12
b /
B, Numbers
ENTER
0:20:09
Numbers, ENTER
language
and Digital Audio
Output mode
b/Bor
AUDIO
InstaliodSeup
setting.
all of the features
button is
on-screen
B, Numbers
Audio
Notes:
Some discs may not
shown below.
Number
Time search
Subtitle
?
1/3
b /
ENTER
highlighted.
press ENTER to execute the
?
Selection Method
Title Number
item.
the number buttons if
use
menu.
during playback.
Press v / V to select
2.
the TV
Example: On-Screen Display during
playing DVD Video
pressed for 10 seconds,
display disappears.
the
language
ABC
b/Bor
1 ENG
SUBTITLE
Angle
b/Bor
1/3
ANGLE
Sound
3D SUR
b/B
Status/Restrictions
Example: On-Screen Display during
playing VCD
Repeat
title
Repeat
sequence
Enter
Marker
a
Items
Selection Method
Track Number
MARKER SEARCH
123456789
Marker Search
menu
(or
PBC
1/3
Action
play
from this
prohibited
or
ENTER
Numbers
0:20:09
point
not available
B, Numbers
mode)
Time search
Resume
b /
ENTER
b/Bor
Audio Channel
STEREO
Sound
AUDIO
3D SUR
b/B
Example: On-Screen Display during
playing divx movie disc
Items
Selection Method
Track Number
1/3
b /
B, Numbers
ENTER
Time search
0:20:09
Audio
language
and Digital Audio
Output mode
Subtitle
Sound
language
b/Bor
1
MP3
ABC
Numbers, ENTER
ENG
3D SUR
AUDIO
b/Bor
SUBTITLE
b/B
17
Initial
LANGUAGE
Settings
LANGUAGE
By using the Setup menu, you can make various
adjustments to items such as picture and sound.
You can also set a language for the subtitles and the
Setup menu, among other things. For details on each
Setup menu item, see pages 18 to 22.
To
display
display
the
Disc Subtitle
Off
Disc Menu
Original
2.
Use v / V to select the desired
alternate
Setup
menu
appears.
then press
to the second level. The screen shows
option
the selected
item,
Use v / V to select the second desired
press B to
move
as
well
option
as
then
Select
a
language
for the
Use v / V to select the desired
5.
Press SETUP
then press
ENTER to confirm your selection. Some items
require additional steps.
N to exit the
setting
Setup
Original:
Refers to the
disc
recorded.
was
Setup
menu
and
on-screen
DVD
menu.
original language
Other: To select another
track
in which the
language, press number
buttons then ENTER to enter the corresponding 4-digit
number according to the language code list in the
reference chapter. If you enter the wrong language code,
press CLEAR.
to the third level.
4.
or
Language
language you prefer for the audio
(disc audio), subtitles, and the disc menu.
Press SETUP. The
setting for
setting(s).
Select
Select the
1.
the current
Menu
Disc Audio / Subtitle / Menu
Operation
move
Move
display.
To go back to the previous level:
Press b on the remote control.
18
Original
screen.
To go to the next level:
Press B on the remote control.
3.
Disc Audio
A second press of
menu.
SETUP will take you back to initial
B to
English
Language
and exit the Menu:
Press SETUP to
General
Menu
4. When the confirm
DISPLAY
Cancel is
DISPLAY
TV
16
Aspect
Display
Mode
Progressive
menu
:
to
9Wide
highlighted
highlight Enter.
as
appears on your screen
default. Use the b button
Widescreen
Scan
5.
Off
Pressing
scan
ENTER will set this unit to
Progressive
mode.
Caution:
Once the
Move
TV
:
Select
DVD
Aspect
4:3
setting for progressive scan output is entered,
an image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
Select when
a
On in error, you must reset the unit.
1) Remove any disc from the unit and close the disc
standard 4:3 TV is connected.
16:9 Wide: Select when
a
See that "DISC" is
16:9 wide TV is connected.
2)
Display
Display
Mode
works
only
when the TV
the
display
window.
InstaliodSeup
output will be restored to the
standard setting and a picture will once again be
visible on a conventional analog TV or monitor.
DVD
setting
on
Press STOP and hold it for five seconds before
releasing
Mode
displayed
tray.
it. The video
Aspect
mode is set to "4:3".
LetterBox:
upper and
Displays a wide picture with
lower portions of the screen.
bands
the
on
Panscan:
Automatically displays the wide picture
screen and cuts off the portions that do not
on
entire
fit.
Progressive
the
Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a
progressive scan signal, set Progressive Scan to On.
To turn On
progressive
scan:
Connect
component out of this unit to the input of your
monitor/television, set your television or monitor to
Component Input.
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
DISPLAY
TV
Aspect
Display
Mode
Progressive
Scan
On
Off
Prev.
2. Select "On"
using
Move
Enter
the v / V buttons.
3. Press ENTER to confirm your selection.
The confirm menu will appear.
Note:
If your TV does not accept the Progressive Scan format,
the picture will appear scrambled if you try Progressive
Scan
on
the DVD
Player.
19
AUDIO
Each DVD disc has
Set this unit AUDIO
audio
system you
variety of audio output options.
options according to the type of
a
use.
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
DVD
/ DTS / MPEG
Dolby Digital
Select
DivX
Bitstream: Select "Bitstream" if you connect the
DVD Player's DIGITAL OUT jack to an amplifier or
other
equipment
with
Dolby Digital,
a
DTS
or
MPEG decoder.
PCM
MPEG): Select when
two-channel digital stereo amplifier.
in Dolby Digital or MPEG will be
(for Dolby Digital
connected to
a
DVDs encoded
automatically
/
downmixed to two-channel PCM
audio.
Off
not
(for DTS): If you select "Off", the DTS signal
output through the DIGITAL OUT jack.
is
DVD
Sample Freq. (Frequency)
If your receiver or amplifier is NOT capable of handling 96 kHz signals, select 48 kHz. When this choice
is
made, this unit automatically converts any 96 kHz
signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each type of
any further processing.
signal through
Check the documentation for your
amplifier
without
to
verify
its
capabilities.
Dynamic Range
With the DVD
Control
format, you
DVD
(DRC)
can
hear
a
DivX
program's
soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology.
However, you may wish to compress the dynamic
range of the audio output (the difference between the
loudest sounds and the
quietest ones).
This allows
you to listen to a movie at a lower volume without
losing clarity of sound. Set DRC to On for this effect.
Vocal
DVD
Set to On
playing.
only
when
multi-channel karaoke DVD is
The karaoke channels
normal stereo sound.
20
a
on
the disc mix into
OTHERS
The
DivX(R) VOD
PBC, Auto Play and DivX(R) VOD settings
can
be
changed.
You
DivX
display the DivX DRM (Digital Rights
Management) Registration code for your unit only.
can
OTHERS
PBC
Auto
DivX(R)
On
Off
Play
Your
DivX(R)
Video On Demand
VOD
Select
registration
code is
To learn
more
:
XXXXXXXX
visit
www.divx.com/vod
(Done)
Move
Select
The
PBC
Set
Registration code is used for VOD (Video-OnDemand) service agent. You can purchase or rent an
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
are
or
encrypt
Off.
played according
to the
PBC.
Off: Video CDs with PBC
are
played
the
same
way
as
Audio CDs.
Auto
You
Play
move
Notes:
If you rent the DivX VOD file, it has several
viewing limits as shown below.
?
Display
DVD
set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted.
Play
mode is set to
play
back the title
longest playback
automatically.
On: Auto
Play
function is active.
Off: Auto
Play
function is not active.
Play
function may not work for
can
options
of
watch the file.
VOD Rental
DivX(R)
This rental has 3 views left.
Do you want to
On, this DVD player will
search for title that has the
then
the number which you
View
can
If Auto
InstaliodSeup
file.
use one
of your 3 views now?
time and
(Yes) (No)
?
The rental has been
expired.
Notes:
The Auto
some
DVDs.
Rental
Expired
(Done)
?
Display
the authorization
error.
Authorization Error
This
player is not authorized
to play this video.
(Done)
21
LOCK
Password
(Parental Control)
You
LOCK
Rating
Unlock
Password
New
Area Code
IL
(Security Code)
enter
can
on
2. Follow
shown left
step
Input
that may not be suitable
of these discs contain
scenes
Many
parental control information that applies to the
complete disc or to certain scenes on the disc. Movies
and scenes are rated from 1 to 8, depending on the
country. Some discs offer
suitable
more
scenes as an
If you
control feature allows you to block
to scenes below the rating you input, there
new
forget
your
Press SETUP to
2.
Input
the
6-digit
display
Enter
a new
code
1. Select
Enter the code of the
"Rating"
on
the LOCK
menu
then
clear it
using
menu.
security
Rating, Password and Country Code
features, you must input the 4-digit security code
you created. If you have not yet entered a security
code you are prompted to do so.
the
Input a 4-digit code and press ENTER. Enter it
again and press ENTER to verify. If you make a
mistake before pressing ENTER, press CLEAR.
rating
a
from 1 to 8
using
1.
tions and
Rating one (1)
rating eight (8) is
has the most restricthe least restrictive.
unlock, parental control is
plays
not active
in full.
Notes:
rating for the player, all disc scenes with
rating or lower are played. Higher rated
are not played unless an alternate scene is
a
on
the disc. The alternative must have the
rating or a lower one. If no suitable alternative is
found, playback stops. You must enter the 4-digit password or change the rating level in order to play the
same
disc.
4. Press ENTER to confirm your rating
press SETUP to exit the menu.
selection, then
country/area
whose standards
disc, based
on
the
chapter.
Select "Area Code"
on
the LOCK
menu
then press
2.
Follow
3.
Select the first character
4.
Press ENTER and select the second character
using
the v / V buttons.
Unlock
If you select
and the disc
described above.
B.
5.
1-8:
as
DVD
list in the reference
access
available
Setup
used to rate the DVD video
were
press B.
scenes
the
can
by
Area Code
If you set
the same
menu.
number "210499" and the
your children from being able to view
material you believe is unsuitable.
Rating
then press ENTER.
Security Code
1.
3.
preventing
3. Select
or
code is cleared.
parental
2. To
then press B.
(Rating). "Change"
If you forget your security code you
the following steps:
alternative.
22
4-digit code,
again to verify.
it
menu
Select
DVD
for children to view.
access
as
4. Press SETUP to exit the
Some movies contain
The
2
the LOCK
highlighted.
3. Enter the
Rating
change password.
1. Select Password
"New" is
Move
or
step
2
as
shown left
(Rating).
using
v / V buttons.
v / V buttons.
Press ENTER to confirm your
selection.
area
code
Operation
Playing
You will
only
a
Logic search:
During fast forwarding
tape
be able to load and
eject
video cassettes
FORWARD
when your VCR is plugged into the mains.
Your VCR may also playback recordings from NTSC
tapes (on
PAL
Getting
a
better
When
cassette is inserted and
a
TV).
picture
playback started,
the
automatic
tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press PR + or on the remote control
to manually adjust the tracking until any distortions have
to switch automatic
1.
Make
back
tracking
on
on
as
Turn
on
your TV.
Press POWER to turn
During
reduce them with PR
6.
2.
Press N to start
facing
removed, playback of the
automatically.
AUTO TRACKING
Your VCR will
give
3.
the best
automatically adjust
picture quality.
Press PAUSE/STEP to still
Press PAUSE/STEP
the
tracking
to
1 Press 30 seconds
2 Press 60 seconds
picture.
repeatedly to advance
3 Press 90 seconds
a
4 Press 120 seconds
the
5 Press 150 seconds
tape frame by frame.
If you press FORWARD, the picture will be slowed
6 Press 180 seconds
down at about 1/19 times the normal
OPR
can
be
playback
for up to 5 minutes. After 5
minutes your VCR will stop the tape to prevent
damaging the tape or your VCR
Tapes
paused
picture quality
pressing PR + or
4.
can
be
improved slightly by
playing
your tape.
Double
speed playback
Press the "N (X2)" button during normal
playback. The tape will play back at double speed
1.
Press i.
2.
Press 1
3.
Press OK.
4.
Press
normal
(X2)"
Response)
3
or
2 to select OPR.
or 4
repeatedly
to select:
OFF, SOFT
or
SHARP.
and without sound.
Press the "N
Picture
automatically improves playback picture
quality by adjusting your VCR to the condition of the
tape. Please note that the OPR icon ( ) will only
appear in play that mode when playing a tape.
-.
Press N to continue
(Optimum
This feature
.
Still
Operation
(Commercial Message) Skip:
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then
resume normal playback.
While tape is playing press CM SKIP on the remote
control to skip commercial (or another programme
material).
Repeatedly press CM SKIP to skip:
your tape.
video cassette which has had its
cassette will start
playback.
CM
away from you.
playing
If you load a
record protection tab
-.
tape is reached, your VCR will
stop playback automatically, rewind, stop, eject the
tape.
on
arrow
Press STOP to end
or
+
If the end of the
The video cassette should have the window side
up and the
shuttle, the noise bars
Press EJECT.
your VCR.
Insert the video cassette into your VCR.
facing
slow motion and
may appear on the picture according to the status
of tape. If distortions can be seen in the picture,
again.
that you have correctly connected your
described earlier in this book.
shuttle, press the
desired function.
the remote control
sure
VCR
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(REV, PB5-, PB1-, still, SLW, PLAY, 2PLY, CUE). To
Slow motion
switch off the slow motion and
-
been removed. Press numbered 0
or
back at
played
5.
rewinding press and hold
BACKWARD the picture will be
7 times normal playback speed.
or
button to return to
playback
Please note you may
at
playing
speed
5.
Picture search:
a
only
set OPR when
tape.
Press i return to
screen.
back press either FORWARD or
BACKWARD and this will enable you to rapidly
wind the tape (7 times normal playback) and see
During playing
where you
are on
the
tape.
Pr-12
P
SET
R
ACMS
OFF
SOFT
SHARP
fOSD
ON
OFF
23
Instant Timer
5.
Recording (ITR)
Your VCR allows you to make
variety of simple methods:
recordings using
Your VCR
runs
6.
7.
will record up to 180 minutes using Standard Play
(SP); using LP you will be able to record up to 360
minutes. Please note there will be
picture
1.
and sound
Make
VCR
quality
Insert
a
your VCR.
The video cassette should have the window side
up and the arrow facing away from you.
Press PR + or to select the programme number
facing
3.
-
you wish to record.
You may also directly select programme number
using the numbered buttons on the remote
control.
4.
If you wish to record directly from the AUDIO L/R
(VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
(L(MONO)/R)/
VIDEO IN terminals
repeatedly
press AV until the socket you wish to record from
is displayed.
AV 1 for
VIDEO
from AUDIO L/R
recording
(VCR IN AV1)
terminals
on
(VCR
the
IN
rear
AV1)/
of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
24
If you press PAUSE/STEP
unit will
enter the record pause mode and ITR is cancelled.
paused for up to 5 minutes; RECP
will be displayed when a tape is paused. After 5
minutes your VCR will stop recording to prevent
damaging the tape or your VCR.
Tapes
your VCR.
video cassette with protection tab into
on
(L(MONO)/R)/
the front of your unit.
unwanted
recording.
during ITR, this
loss in
on
recording
Press PAUSE/STEP to continue
that you have correctly connected your
described earlier in this book.
as
Press PAUSE/STEP to avoid
scenes.
sure
Press POWER to turn
2.
when
slight
using LP.
a
recording.
press will increase the record time by 30 minutes
until you reach a maximum of 9 hours.
which
enables you to record up to twice the amount of
time on a video cassette. For example an E-180
Press REC/ITR to start
RECORD will appear on the TV screen.
Press REC/ITR several times. Each successive
out.
incorporates Long Play (LP)
or
produce improved picture and sound quality, however LP will provide twice as much recording time as SP.
Instant Timer
video cassette
Long Play
SP will
a
Recording (ITR) start recording
immediately for a set period of time or until the
Press LP if you wish to record in
Standard Play.
8.
can
be
Press STOP to end
recording.
Press EJECT.
EJECT will appear
seconds.
on
the TV
screen
for
few
a
Notes:
If you do not wish to record
on a
tape (this
can
happen quite easily by accident!) remove the
protection tab on the back edge of the video
cassette.
It is
possible to record on a video cassette
record protection tab removed by covering
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to appear TV indicator in the display
window and then selecting a different channel on
your TV.
On
Timer
recording using
Screen Display
PR
DATE
TIME
PR-03
You may set up to seven timer record events
within one month of the current date.
::
--
--
-~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SUMOTUWETHFRSA
Note:
Before
setting
the timer make
set the DVD+VCR clock
sure
correctly
that you have
and you know
which stations you have tuned TV stations
your DVD+VCR.
6.
Use v/V/1/2 buttons to enter the
Insert
a
video cassette with
protection
on
Please note your DVD+VCR uses a 24 hour clock.
e.g. 1pm will be displayed as 13:00.
2.
up and the
facing
arrow
DATE
PR-03
tab into
your DVD+VCR.
The video cassette should have the window side
facing
away from you.
).
7.
Press OK.
41 4 ::
00 1 5
SP
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
Press B to select the
Press v
PR
DATE
(SP, IP,
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
Use the PR/TRK
(v/V)
necessary, to
,
PR-03
setting
tape is left and
SP
--
PR
Press OK to start
tape speed
LP).
speed from SP to LP, if
complete recording the program.
SP
--
or
V to select the desired
switches
SP
--
or
recording speed.
IP mode determines how much
SP
--
DELETE:
4.
TIME
Press i.
Press1or2toselectREC(
3.
start
and end times of the programme that you wish to
record.
PR
1.
recording
the timer record event.
to enter the station that
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
you wish to record then press 2.
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
Note:
If all timer record events
full press v or V to
select the event that you wish to remove and replace.
Press b to delete the event.
5.
Use the PR/TRK
are
(v/V)
to enter the date of the
programme.
If you press OK before
select
one
of the
entering the date you may
following automated recording
features.
Press 1
or
2 to
select, then press OK
DLY To record every day (except
Sunday) at the same time.
SU~SATo record at the
same
to confirm.
Saturday
and
time every week.
25
recording using On
Screen Display (Continued)
Timer
8.
Press i to set another timer record event and
follow
3 to 8.
steps
Check that the timer event details
Press i return to
correct.
screen.
If PLEASE CHECK is
you have entered
and will need to re-enter the data.
incorrectly
9.
are
displayed,
Press POWER to switch your DVD+VCR to Timer
Standby mode.
The timer
will appear in the display
window while your DVD+VCR waits to make the
symbol (
)
recording.
10. Press POWER to end timer
recording.
Notes:
The DVD+VCR will
Timer
power off when
ends.
Recording
During
automatically
timer
recording standby mode, the DVD
cannot be operated. To use the
VCR mode
and
DVD+VCR, press POWER. After you use the DVD
or VCR, press POWER again to put the VCR into
timer
If at
recording standby
mode.
later date you wish to delete or change any
of the settings in timer event memory you may do
so
a
without
mation
Use v
delete
having to enter all the timer event inforagain. Simply display the timer event screen.
V to select the event that you wish to
or
or
change.
Press b to delete the event...or
Press OK to
then press b or B to
Start and End times and
change;
Station, Date,
Press v
recording speed.
or
select;
V to enter the correct
information.
If Timer record events
Make
ing
sure
Overlap...
that the
events do not
preset times of the timer recordoverlap. If they do, the earlier pro-
gramme will
always
Example:
Programme
1 is
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
end
2 is
at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
2 will be recorded.)
To watch
a
DVD while
performing
press DVD to select DVD mode.
26
a
timer
recording,
Playing
a
DVD
or
General Features
Video CD
Note:
Playback Setup
Turn
1.
the TV and select the video
on
connected to the DVD
Turn
2.
the
the audio
on
input
source
input
source
player.
system (if applicable) and select
connected to the DVD
player.
Press OPEN/CLOSE to open the disc tray and
load your chosen disc in the tray, with the
3.
side down.
playback
Press OPEN/CLOSE to close the
4.
starts
automatically.
If
playback
tray. Playback
does not start,
press N.
In
cases, the disc
some
menu
might
Unless stated
Moving
to another TITLE
When
disc has
a
title/chapter
you want to view, then press ENTER to start.
Press TITLE or DISC MENU to return to the menu
screen.
and
stopped
then the
b / B to
move
You
(See
on
page
?
can
title
operating
21).
another
The
?
To watch
DVD
a
region
code for this
is 2
more
disc has
than
one
chapter/track
Press .
than
more
track, you
one
chapter
can move
or a
to
follows:
as
briefly during playback to select
the next chapter/track or to return to the beginning
of the current chapter/track.
?
Press
ous
or
>
. twice
briefly
to
step back
to the
previ-
chapter/track.
To go
directly
to any
chapter during
DVD
playback,
press DISPLAY and press v / V to select the
chapter/track icon. Then, input the chapter/track
numberoruseb/B.
Search
1.
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
to select the
required
speed.
during
timer
DVD, DivX disc; X2, X4, X16
Video CD; X2, X4 or X8
recording standby
mode, press POWER and DVD
mode.
player
on a
?
?
DVDs may have a region code. Your player does not
play discs that have a region code different from
a
disc has
parental control is set and the disc is not within
the rating settings you must input the password.
(See "Lock Menu" on page 22.)
player.
(two).
its number while
When
If
your
to
to another title.
to another CHAPTER/TRACK
Notes:
?
can move
playback is
appropriate number (0-9) or use
Moving
may differ. Follow the instructions on
the each menu screen. You also may set PBC to
"PBC"
title, you
one
play any title by inputting
playback is stopped.
procedures
Off
than
another title. Press DISPLAY while
Use the number buttons to select the track you
want to view and press RETURN to return to the
settings
more
appear
Use the b B v V buttons to select the
Menu
use
the remote control. Some features may also be
available on the Setup menu.
instead:
menu screen.
otherwise, all operations described
to switch to DVD
3.
To exit SEARCH
Changing
X100
mode, press N.
the Audio Channel
Press AUDIO
different
or
repeatedly during playback to hear
audio channel (Stereo, Left, or Right).
a
27
Still Picture and
Frame-by-Frame Playback
Repeat
You
Press PAUSE/STEP
1.
the remote control
during
playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP repeatedly.
To exit still motion
2.
on
mode,
Press
Press PAUSE/STEP
The DVD
player
DVD Video Discs
press N.
?
now
?
Title:
?
Off
?
go into PAUSE mode.
?
?
Use m
2.
or
M to select the
1/16, t 1/8, t 1/4,
1/16, T 1/8, T 1/4,
With
or
t
or
T
required speed:
1/2 (backward), or
1/2 (forward).
t
T
Divx
discs, Video CD, the Slow speed
changes: T 1/16, T 1/8, T 1/4 or T 1/2
a
To exit Slow Motion
playback
in
reverse
is not
with
possible
Video CDs and DivX Discs.
CDs, Divx discs Repeat Track/All/Off
Track : repeats the current track
All : repeats all the tracks on a disc.
Off
The unit
in
mode.
during playback
stop
automatically begins random playback
or
and RANDOM appears
Press RANDOM
play repeatedly.
If you press > once during Repeat Chapter
playback, the repeat playback cancels.
again
To
produce
(Track)
3D surround effect that simulates
a
on
the TV
1.
Press DISPLAY
2.
Use 3
screen.
to normal.
3.
during playback.
4 to select the sound
or
The sound
option
will be
option.
highlighted.
Use1or2totoselect"3DSUR".
To turn off the 3D Surround
Tip:
By pressing
another title
>
during random playback, the unit selects
(track) and resumes random playback.
Note:
Video CD with
menu
to
use
PBC, You
must set PBC to Off
the random function
(See
the
on
"PBC"
on
1.
playing
at any chosen time
2.
on
Press DISPLAY
box shows the
page
21).
effect, select "Normal".
Time Search
To start
setup
does not
:
speakers (instead
of the five+ speakers normally required for multi-channel audio from a home theater system).
Press RANDOM
a
-
multi-channel audio from two stereo
Random
On
play repeatedly.
3D Surround
Slow motion
2.
does not
:
current title.
mode, press N.
Note:
1.
repeats the
Notes:
?OnaVideoCDwithPBC,youmustsetPBCtoOffonthe
setup menu to use the repeat function (See "PBC" on
page 21).
?
(forward).
3.
Repeat Chapter/Title/Off
Chapter: repeats the current chapter.
-
Video
(X) during playback.
will
a
repeat mode.
Slow Motion
1.
title/chapter/all/track on a disc.
REPEAT during playback to select a desired
play
can
the disc:
during playback. The
elapsed playing time.
time search
Press v / V to select the time clock icon and
"-:--:--" appears.
Repeat
To
1.
2.
3.
28
A-B
repeat
a
3.
Press A-B at your chosen starting
appears briefly on the TV screen.
again at your chosen
"A B" appears briefly on the TV
repeat sequence begins.
Press A-B
again
to cancel.
the
required
start time in
seconds from left to
point.
end
"
A
*
"
4.
point.
screen
and the
hours, minutes, and
If you enter the wrong
numbers, press CLEAR to remove the numbers
you entered. Then input the correct numbers.
sequence.
Press A-B
Input
right.
Press ENTER to confirm.
selected time.
Playback
starts from the
Zoom
Use
1.
to
zoom
enlarge
Press ZOOM
the video
image.
during playback
or
still
playback
to
activate the Zoom function. The square frame
appears briefly in the right bottom of the picture.
2.
Each press of the ZOOM button changes the TV
screen in the sequence: 100% size → 400% size
→
1600% size
→
screen
fit mode
→
100% size
Screen fit mode:
You
change the way the image appears on the
when you're playing a DVD movie. Press
3/4 to select between
zoomed
B v V buttons to
move
through
normal
playback,
ENTER.
Title Menu
Press TITLE. If the current title has
1.
appears
menu
may appear.
menu
on
the
menu
The
the
press ZOOM repeat-
your selection. Then press
highlight
menu, the
Otherwise, the disc
screen.
offers features such
spoken language and
chapters for the title.
subtitle
a
angles,
as camera
options,
and
Press TITLE to exit.
3.
press CLEAR button.
or
Disc Menu
Notes:
?
DVDs may offer menus that allow you to access
special features. To use the disc menu, press DISC
MENU. Input the corresponding number or use the b
picture.
resume
edly
?
the contents of DVD discs: Menus
2.
Use the bBvVbuttons to
To
Checking
Normal, Enhanced, and
Maximum.
4.
DVD Features
can
screen
3.
Special
Zoom may not work on some DVDs.
Screen fit mode is available for playing the DVD
Press DISC MENU and the disc
disc,
Press DISC MENU
again
menu
is
displayed.
to exit.
VR disc and movie file.
Camera
Marker Search
Angle
If the disc contains
To enter
You
can
points.
Marker
a
start
desired
the TV
point
a
from up to nine memorized
marker, press MARKER at the
the disc. The Marker icon appears on
briefly. Repeat to enter up to nine mark-
on
screen
angles, you can change to a different camera
angle during playback. Press ANGLE repeatedly
during playback to select a desired angle. Note that
the number of the current angle appears on the
display.
camera
playback
To enter
recorded at different
scenes
ers.
To Recall
1.
2.
or
Clear
During
disc
search
menu
Within 10
a
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
seconds, press
b / B to select
number that you want to recall
3.
Press ENTER and
marked
Changing
scene.
playback
or
a
You
clear.
starts from the
Or, press CLEAR and the marker
on
any marker by inputting its number
the marker search menu.
can
play
Language
Press AUDIO
different
repeatedly during playback
audio language or audio track.
to hear
a
marker
number is erased from the list.
4.
the Audio
Subtitles
Press SUBTITLE
the different
repeatedly during playback
subtitle languages.
to
see
Note:
?
The subtitle file of the DivX file is
smi,
?
displayed only
srt and sub.
If there is
no
information
not read in the DivX
file,
or
"
1
there is
"
or
etc.
a
code that
are
can
displayed.
29
Playing
Audio CD
an
or
MP3/WMA
MP3 / WMA disc
limited
Disc
?
compatibility
with this
player
is
follows:
as
within 8
48 kHz (MP3),
Sampling frequency:
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
The player cannot read an MP3/WMA file that has
a file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We
recommend that you use Easy-CD Creator, which
-
-
The DVD
player can play MP3/WMA formatted
recordings on CD-ROM, CD-R, or CD-RW discs.
?
-
-
?
Audio CD
Once you insert an audio CD a menu appears on the
TV screen. Press v / V to select a track then press
N
ENTER and
or
playback
?
?
starts.
AUDIO CD
1/12
0:52:07
List
Program
creates
Track1
an
Track2
?
Track3
Track4
File
names
and must
Track5
Track6
?
Track7
Clear All
Track8
PROGRAM
They
ISO 9660 file
should have
incorporate
system.
a
an
should not contain
maximum of 8 letters
.mp3 or .wma extension.
special letters such as /
?*:"<>letc.
Edit
?
The total number of files
on
the disc should be
less than 650.
MP3 / WMA
1.
Press v / V to select
to
2.
folder, and press ENTER
a
the folder contents.
see
player requires
discs and
recordings
to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are
Pressv/VtoselectatrackthenpressNor
ENTER. Playback starts.
many different types of recordable disc formats
(including CD-R containing MP3 or WMA files) and
MUSIC
0:00:00
This DVD
1/12
these
List
require certain pre-existing conditions (see
above) to ensure compatible playback.
Program
1-Music1
2-Music2
Customers should note that
3-Music3
4-Music4
required
5-Music5
6-Music6
DISPLAY
Info
PROGRAM
Edit
should
ID3 TAG
?
When
track
owner.
playing
titles, you
DISPLAY.
?
If there is
the
file
a
containing
information such
as
the information
by pressing
[ Song, Artist, Album, Comment, Genre ]
no
can see
information, "No ID3 TAG" appear
on
menu screen.
Tip:
?
If you
are
in
a
file list
return to the Folder
the MUSIC
on
list,
menu
the v / V to
use
and want to
highlight
and
press ENTER.
?
Press DISC MENU to
?
On
CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO
a
word
?
on
When
top of the
playing
titles, you
30
to the next page.
move
a
menu
file
can see
is
highlighted.
containing
information such
the information
is
in order to download MP3 / WMA files
and music from the Internet. Our company has
no right to grant such permission. Permission
Clear All
7-Music7
permission
by pressing
as
track
DISPLAY.
always
be
sought
from the
copyright
Audio CD and MP3 / WMA Disc
Random
Features
1.
Pause
1.
2.
Press PAUSE/STEP
Moving
1.
press N, ENTER
playback,
PAUSE/STEP again.
or
press
or
the next track
>
to
or
2.
To return to normal
repeatedly
until
playback, press RANDOM
RANDOM disappears from the
menu screen.
Tip:
to another Track
Press .
during playback or when
playback is stopped. Random Playback begins
immediately and RANDOM appears on the menu
screen.
during playback.
To return to
Press RANDOM
briefly during playback to go to
return to the beginning of the
By pressing
>
during
another track and
random
resumes
playback, the
random playback.
unit selects
current track.
Repeat
2.
Press . twice
to go back to the
briefly
previous
track.
3.
In
case
of audio
CD,
1.
To
2.
Press A-B
at your chosen end
The
and "A-B" appear
to go
enter the track number
buttons
directly to any track,
using the numbered
(0-9).
1.
can
play
a
track/all
on a
Press REPEAT when
disc.
playing
3.
?
?
a
disc. The
repeat
a
desired
does not
To
repeat playback
during Repeat Track playback,
produce
a
3D surround effect that simulates
the
1.
2.
Search
Press AUDIO
during playback.
1.
Press m
or
M
during playback.
2.
Press m
or
M
repeatedly
X8
to select the
backward
or
on
the
menu screen.
To return to normal
repeatedly
To exit SEARCH
play
menu screen.
"3D SUR." appears
3.
menu
speakers (instead
of the five+ speakers normally required for
multi-channel audio from a home theater system).
cancels.
speed: X2, X4,
to
the
multi-channel audio from two stereo
play repeatedly.
Note:
once
on
3D Surround
repeats the current track
All: repeats all the tracks on a disc.
If you press >
begins
point.
repeat mode.
Track:
Off(No display):
again
Repeat icon
To exit the sequence and return to normal play,
press A-B again. The Repeat icon disappears from
the
Press REPEAT to select
?
a
repeatedly.
icon appears.
2.
sequence during disc playback press
A-B at your chosen starting point. The Repeat icon
and "A" appear on the menu screen.
repeat
screen, and the sequence
Repeat Track/All/Off
You
A-B
until
playback, press AUDIO
"3D SUR." disappears from
the
menu screen.
required
forward.
mode, press N.
31
Repeat Programmed
Programmed Playback
1.
1.
Insert
2.
contain 30 tracks.
can
?
?
Audio CD
2.
MUSIC
or
menu
Note:
Press PROGRAM
again, then
the Program
to exit
the
1.
mark will
E
MUSIC
0:00:00
1/12
List
E
Program
E
Program
Track5
Track2
Track7
1-Music1
4-Music4
Track3
Track4
2-Music2
6-Music6
Track4
Track1
3-Music3
1-Music1
2-Music2
Track5
4-Music4
Track6
5-Music5
Track7
6-Music6
Clear All
Track8
Audio CD Menu
PROGRAM
Info
The program
PROGRAM to exit the
stopped.
on
to
page
the
use
playback
on
21).
VIDEO CD
E
Program
Track2
Track2
Track3
Track3
Track4
Track1
Track5
Clear All
Video CD Menu
3.
Select
a
track
on
the
"List", then press ENTER
to
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
4.
Press B.
Select the track you want to start
"Program" list.
5.
Press N
or
playing
6.
To
resume
playback,
the
Playback begins in
programmed the tracks.
list have
played
normal
playback
select
a
on
the
once.
from
track of CD
and then press N.
32
on
ENTER to start.
the order in which you
Playback stops after all of the tracks
"Program"
to
Edit mode.
Press CLEAR.
2.
programmed playback (See
Track5
Program
stop mode
4.
move
to the
"Program"
list.
Repeat
to
erase
erase
additional tracks
the list.
the
Follow
List"
must set PBC to Off
Track1
Press PROGRAM in the
Use v/V to select the track that you wish to
from the "Program" list.
is
menu.
List
List
3.
Erasing
Note:
menu
the
Complete Program
as
steps
1-2 of
"Erasing
a
List
Track from
Program
above.
appears. Press
menu
PBC, you
:
Program
Press B to
Use 3/4 to select "Clear
The
Video CD with
during Repeat Track playback,
Edit
MP3/WMA Menu
Video CD: Press PROGRAM while
setup
play repeatedly.
2.
1.
the
does not
Track from
a
Video CD
on
DISPLAY
once
Clear All
7-Music7
PROGRAM Edit
a
repeat mode.
1/12
Track1
"PBC"
Off(No display):
enter
Edit mode.
AUDIO CD
On
desired
repeats the current track
All: repeats all the tracks on programmed list.
Erasing
List
a
repeat playback cancels.
mark will appear to the right of the word
"Program" on the right side of the menu screen.
0:52:07
repeat
Track:
If you press >
E
disappear
disc. The
Note:
appears.
Press PROGRAM.
The
a
MP3/WMA Discs:
or
AUDIO CD
playing
Press REPEAT to select
?
disc.
a
Press REPEAT when
icon appears.
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program
Tracks
programmed
(or MP3/WMA) list
complete Program
All", then press ENTER.
for the disc will be erased.
Note:
The programs
removed.
are
also cleared when the disc is
Viewing
this DVD
Using
JPEG Disc
a
Player
can
you
Moving
view discs with JPEG
files.
1.
Insert
disc and close the
a
the TV
on
appears
tray. The PHOTO
menu
screen.
Press.or>orcursorborBoncewhile
viewing a picture
previous file.
Use
(see
Preview
List
JPEG Folder 1
to advance to the next
or
JPEG
Zoom
PHOTO
JPEG
to another File
the
to
enlarge
page)
zoom
29
photo image.
JPEG Folder 2
>>>
JPEG Folder 3
To rotate
JPEG Folder 4
JPEG Folder 5
picture
JPEG Folder 6
Press v / V
JPEG Folder 7
during showing
JPEG Folder 8
picture
clockwise
or
a
counter clockwise.
To listen to MP3/WMA music
2.
Press v / V to select
a
folder, and press ENTER.
A list of files in the folder appears. If you are in a
file list and want to return to the previous Folder
list,
the v / V buttons
use
the remote to
and press ENTER.
highlight
3.
on
Viewing the file proceeding starts.
While viewing a file, you can press STOP
to the previous menu (PHOTO menu).
Slide Show
to
N.
the
(Slide Show)
(Normal)
?
On
then
?
>
Speed options
(Slow).
: >>>
(Fast),
Press
top of the
2.
Press TITLE to
3.
Press v / V to select
4.
Use B / V to select
menu
2.
player
display
a
PHOTO
photo
menu.
file.
pressed.
JPEG disc
is
limited
?
highlighted.
compatibility
now
during
slide show.
is
follows:
as
upon the size and number of JPEG
files, it could take a long time for the DVD player
to read the disc's contents. If you don't see an
Depending
2048
go into PAUSE mode.
To return to the slide
PAUSE/STEP
player
display
after several
minutes,
some
of
---
JPEG
will
with this
the files may be too large
reduce the resolution
of the JPEG files to less than 2M pixels as 2760 x
Press PAUSE/STEP
The
Operation
types of file in
icon then press ENTER.
starts. The playback will continue until
on-screen
1.
the two
Tip:
RETURN, information of file is hidden.
Still Picture
containing
disc.
>>
disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or PHOTO
on
same
only the desired music watching picture,
programmed the desired tracks from the "MUSIC"
menu and then proceed as above.
a
word
the
to MP3/WMA
To listen to
three Slide
and
on
listening
player.
Playback
Tip:
are
Insert the disc
STOP is
highlight
files while
display
move
press ENTER.
There
can
music files recorded
JPEG
Use vVbBto
?
You
the
or
watching picture
JPEG
1.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
to rotate the
picture
show, press N
or
?
press
pixels
and burn another disc.
The total number of files and folders
on
the disc
should be less than 650.
again.
?
Some discs may be incompatible due to a
different recording format or the condition of disc.
?
Ensure that all the selected files have the
extensions when
?
into the CD
If the files have
rename
?
copying
".jpg"
layout.
File
them
names
".jpe" or ".jpeg" extensions, please
as ".jpg" file.
without
able to be read
the files
are
Windows
by
shown
".jpg"
extension will not be
this DVD+VCR. Even
as
JPEG
image
though
files in
Explorer.
33
DVD VR format Disc
Playing
a
This unit will
play
DVD-R/RW discs recorded
the DVD-Video format that have been
a
?
using
finalized using
Refer to the information in this
contacting
This unit will
Insert
a
play DVD-RW discs recorded using
Recording (VR) format.
disc and close the
appears
on
the TV
tray. The DVD-VR
menu
screen.
DVD-VR
When
Please
shipping
save
Do not
Pressv/VtoselectatrackthenpressNor
ENTER and playback starts.
move
to the list
menu.
played
in this
play-
er.
Some DVD-VR disc
RECORDER.
are
Player
made with CPRM data
does not
by
DVD
support these kinds of discs.
CPRM is
copy protection system (with scramble system)
allowing the recording of 'copy once' broadcast
player
is CPRM
compatible,
which
means
that you
record copy-once broadcast programs, but you cannot
then make a copy of those recordings. CPRM recordings
can
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
as
insecticide
the unit.
plastic products in contact
long period of time. since they
or
with the unit for
a
leave marks
the surface.
on
the unit
player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution.
Do not
or
use
thinner,
strong solvents such
as
that
are
only be played on
specifically compatible with CPRM.
can
Maintaining
these
as
might damage
alcohol, benzine,
the surface of the
the Unit
The DVD
player is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty or
worn, the picture quality could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
34
such
a
programs. CPRM stands for Content Protection for
Recordable Media.
can
liquids
unit.
What is 'CPRM'?
This
volatile
To clean the
Unfinalized DVD-R/RW discs cannot be
only
use
near
Cleaning
Note:
?
the
Do not leave rubber
?
Press TITLE to
the unit
the exterior surfaces clean
spray
?
service technician.
original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
at the factory.
?
3.
before
the Unit
Handling
Keeping
2.
a
chapter
DVD-recorder.
the Video
1.
Maintenance and Service
use.
contact your nearest authorized
Playing
a
DivX Movie Disc
DivX disc
as
this DVD
Using
Player
you
can
play
Insert
a
appears
disc and close the
on
the TV
with this
player
is limited
follows:
DivX disc.
?
1.
compatibility
tray. The MOVIE
menu
Available resolution size of the DivX file is under
720x576
(W
x
H) pixel.
screen.
?
The file
name
of the DivX subtitle is available
by
56 characters.
MOVIE
0:00:00
List
?
Movie Folder 1
If there is
impossible code to
file, it may be displayed as
display.
"
Movie Folder 2
Movie Folder 3
Movie Folder 4
Movie Folder 5
express in the DivX
mark on the
"
_
Movie Folder 6
Movie Folder 7
?
Movie Folder 8
If the number of the
frame is
screen
over
30
per 1 second, this unit may not operate
normally.
Press v / V to select
2.
a
folder, and press ENTER.
?
A list of files in the folder appears. If you are in a
file list and want to return to the Folder list, use the
v / V buttons
on
the remote to
If the file is recorded with
*
or
N.
?
On
a
CD with
switch
move
highlighted.
Operation
encoders, like DivX
There
are
called
1-point, 2-point,
or
Xvid, have this option.
different levels of GMC
or
3-point
encoding, usually
GMC.
to the next page.
MP3/WMA, JPEG and MOVIE file, you
Playable
can
MUSIC, PHOTO and MOVIE menu. Press TITLE
and MUSIC, PHOTO and MOVIE word on top of the menu
is
GMC, the unit
GMC is the acronym for Global Motion Compensation. It
is an encoding tool specified in MPEG4 standard. Some
MPEG4
Press STOP to exit.
Press DISC MENU to
audio is
GMC?
Tip:
?
or
supports only 1-point of the record level.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
4.
interleaved, either video
outputted.
?
press ENTER.
3.
file is not
and
highlight
If the video and audio structure of recorded
DivX file
z ".avi ",
".mpg ", ".mpeg
Playable
Codec format
"
z "DIVX3.xx ", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
"MP43 ", "3IVX ".
Playable
Audio format
z "AC3 ", "DTS ", "PCM ", "MP3 ", "WMA ".
?
Sampling frequency: within 8 48 kHz (MP3),
-
within 32
?
Bit
32
48kHz
(WMA)
rate: within 8
320kbps (MP3),
192kbps (WMA)
-
-
-
35
Additional Features-VCR part
On Screen
You may
Video Doctor
Display
easily display
the current time
tape
or
counter, amount of tape left, day, month, year, day of
week, programme channel, tape speed and operational mode of your VCR will appear on the TV
If a recording is taking place these On Screen
Displays
will not be recorded onto the
screen.
(Self-Diagnosis)
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1.
Press i.
Press1or2toselect
.
Press OK.
tape.
Press CLK/CNT to
1.
display.
repeatedly
Press CLK/CNT
display options.
The
to
the
cycle through
counter and amount of
tape
12
Pr-12
tape left will appear if there is
a
PSET
R
tape loaded.
ACMS
SET
SYS
fOSD
ON
OFF
2.
After 3 seconds the
Displays
will clear
majority of the On Screen
leaving only the clock or tape
counter and the amount of
Press CLK/CNT
the TV
again
to
tape left
remove
all
the
on
screen.
displays
ANTENNA CONNECT
from
HEAD STATUS
TAPE STATUS
NO. OF TIMER PROGRAMME
screen.
NEXT TIMER PROGRAMME
PLEASE CHECK
Tape Counter Memory Stop
The
Digital Tape Counter can
display window instead of the
i
displayed on the
time by pressing
CLK/CNT on the remote control. The Digital Tape
Counter indicates the relative positions of recordings
on
1.
the
be
2.
Press CLEAR to set the counter to 0:00:00.
start
the actual play time
tape counter
in hours, minutes and seconds.
Press STOP when
problem.
playback
or
recording
is
NEXT TIMER PROGRAMME
O PR-01 26 10:00~11:00SP
Shows the current status of timer
Press BACKWARD.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
3.
Lock
(Child Lock)
The control buttons
switched off
using
1.
on
the front of the unit
that your unit
the remote control.
so
can
only
be
be
can
operated
Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons
on
the front of your unit
SAFE will appear in the
display
are
pressed
window for
a
seconds.
2.
Press LOCK
again
to switch off the child lock.
OFF will appear in the
36
jack securely.
display
window.
few
place
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
complete.
The
a
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
recording.
will display
The
2.
to check
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
Press CLK/CNT.
or
3 or 4
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
tape.
Press N
Press
Press i to
remove
the
menus
recording.
from the TV
screen.
Hi-Fi Stereo Sound
System
Your VCR will record and
playback
sound. In addition it has
stereo NICAM
a
Hi-Fi stereo
digital stereo
and playback
sound decoder. This allows you to record
the sound in several different ways. Video cassettes
recorded
your VCR will have a normal mono audio
track and two VHS Hi-Fi stereo audio tracks. These
on
stereo tracks allow you to make audio recordings in
Hi-Fi stereo or bilingual mode from a TV broadcast,
stereo audio
1.
system, video disc
Your VCR's NICAM
digital
or
another Hi-Fi VCR.
sound decoder allows
you to enjoy broadcasts with NICAM sound, as
well as standard stereo, bilingual and mono sound.
The particular type of sound received or that
recorded will be briefly displayed on the TV screen
for a couple of seconds:
STEREO NICAM
Sound is automatically recorded on the Hi-Fi
stereo and mono tracks of the video tape.
BIL NICAM
Both audio channels will be recorded on the Hi-Fi
stereo tracks. The primary language channel (left)
will be recorded on the mono track of the video
tape.
MONO
The sound is recorded
mono
2.
track of the video
Press AUDIO
on
the Hi-Fi tracks and the
tape without any separation.
repeatedly
until the desired audio
mode appears.
3.
The choice is
MONO.
STEREO, LEFT, RIGHT and
In BIL NICAM
playback
the
primary
lan-
guage is output on the left channel and the secondary channel is output simultaneously from the
right channel when audio output is set to
STEREO. The primary language will be output
from both channels when the audio setting is
MONO. Please note that when adjusting the tracking control Hi-Fi stereo sound may revert to
MONO.
37
Additional Features
Last Scene
This
player
source, and
power switch of your LG TV with the supplied remote
control.
Memory
memorizes last
that is viewed. The last
scene
from the last disc
remains in memory
the disc from the player or switch
scene
if you remove
off the player. If you load
even
memorized, the
scene
is
a
disc that has the
automatically
You
can
control the sound
level, input
You
can
control the sound
level, input
player
manufacturer code.
scene
recalled.
1.
does not memorize the
player
before
of
disc if you
to play the disc.
scene
While
holding
commencing
down TV POWER
button, press the
appears when you leave the DVD
mode for about five minutes.
Stop
Video Mode
Setting
With certain
ering
or
means
2.
(see
the table
below).
Release TV POWER button.
Code numbers of controllable TVs
screen saver
in
for your TV
a
Screen Saver
player
appropriate
number buttons to select the manufacturer code
switch off the
The
source, and
well. If your TV
power switch of non-LG TVs as
is listed in the table below, set the
Note:
This
other TVs with the remote control
Controlling
discs, the playback picture may be flick-
Dot Crawl is shown
Vertical
interpolation
on
or
straight
lines. That
De-interlace is not
perfectly matched with the disc. In this case, the
picture quality may be improved by changing the
If
more
them
than
one
one
at
a
code number is
listed, try entering
time until you find the
one
that works
with your TV.
Manufacturer
Code Number
LG / GoldStar
1
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Hitachi
4
(Default),
2
video mode.
To
the video
change
mode, press and hold
DISPLAY about 3 seconds
during
disc
playback.
The new video mode number selected is displayed
on the TV screen. Check whether the video quality
has improved. If not, repeat the above procedure
until picture quality is improved.
Video mode sequence:
MODE1 → MODE2 → MODE3
→
MODE1
If you turn off the power, the video mode will return
to initial default state (MODE1).
Detailed
MODE1
or
video
MODE2
:
Description
The
source
material)
:
:
material of the DVD video
(film
material
is determined from disc information.
Suitable for
based material
MODE3
of each Video Mode
playing film based content or video
recorded by the progressive scan method.
Suitable for
comparatively
playing
video based content with
little motion.
Note:
The video mode
Progressive
menu.
38
setting only
works when the
Scan mode is set to "On"
on
the
setup
Note:
Depending
?
function
on
your TV, some or all buttons may not
the TV, even after entering the correct
on
manufacturer code.
?
If you enter a new code number, the code number
previously entered will be erased.
?
When you replace the batteries of the remote, the code
number you have set may be reset to the default setting.
Set the
appropriate
code number
again.
from DVD To VCR
Copying
This unit allows you to copy the contents of a DVD to
a VHS tape with a press of the REC/ITR button.
Notes:
Be
to set
sure
setup
on
the
recorder
With this video recorder you can make recordings
from an external source, such as copying from
another video recorder
attempting to copy is copy
you may not be able to copy the disc.
protected,
are
Insert Disc
Insert the disc you wish to copy in the DVD deck
and close the disc tray.
3.
camcorder.
Note:
In the
following description, this video recorder will be
one used for recording and will be referred to as VCR
B. The other appliance will be used for playback and
will be referred to
1.
2.
or a
menu.
If the DVD you
1.
Scan" to "Off"
"Progressive
from another video
Recording
Insert VHS
Tape
Insert
a
blank VHS
Copy
the DVD to VHS
videotape
VCR A.
VCR A should be connected to the AUDIO L/R
(VCR
panel
into the VCR deck.
as
IN
AV1)/VIDEO (VCR
IN
AV1) on the rear
(L(MONO)/R) /
of your unit or AUDIO IN
VIDEO IN on the front panel of your unit.
Tape
Press the REC/ITR button.
2.
The DVD will go into Play mode and the VCR
will go into Record mode.
If the DVD disc
press the
Play
appears, you may need to
menu
button
manually
to
begin
copy-
Insert the recorded
tape into VCR A and
a
blank
tape into VCR B.
3.
ing.
Press AV until the socket you wish to record from
is displayed. (VCR B)
AV 1 for
Note:
VIDEO
If you press the REC/ITR
DVD mode.
button, be
sure
this unit in
recording from AUDIO L/R (VCR IN AV1)/
(VCR IN AV1) terminals on the rear of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
4.
Stop
the
Copy
playing,
press STOP to
4.
You must
stop the Copy process manually when
the DVD movie ends, or the unit may replay and
and
over
To start
5.
press the REC/ITR
VCR A.
recording,
and PLAY
end the copy.
over
the front of your unit.
Process
When the DVD is finished
record
on
(L(MONO)/R)/
on
When you want to finish
on both video recorders.
copying,
on
VCR B
press the STOP
again.
39
Reference
Language Codes
Use this list to
your desired language for the
Disc Audio, Disc Subtitle, Disc Menu.
input
Language
Code
Abkhazian
following
Code
6566
Language
Fiji
Afar
6565
Afrikaans
initial
settings:
Code
7074
Language
Lingala
Code
7678
Language
Singhalese
Finnish
7073
Lithuanian
7684
Slovak
8375
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
Ameharic
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Tamil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Turkish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Turkmen
8475
Cambodian
7577
Italian
7384
Portuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Codes
Choose
a area
Area
40
code from this list.
Code
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
AR
Ethiopia
Fiji
FJ
Maldives
MV
SN
Australia
AU
Finland
FI
Mexico
MX
Austria
AT
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
Belgium
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
Chile
CL
Hong Kong
Hungary
HU
NG
Switzerland
CH
China
CN
India
IN
Nigeria
Norway
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
Czech
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Portugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Afghanistan
Argentina
Republic
AF
Area
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
SG
SK
UG
Troubleshooting
Check the
following guide
for the
possible
cause
or
VCR do not
a
problem
before
contacting
service.
Cause
Symptom
DVD
work
of
DVD
or
Correction
VCR button is not switched
Refer to page 2.
properly.
properly.
No power.
The power cord is disconnected.
the power cord into the wall
outlet securely.
The power is on, but
the DVD player does
not work.
No disc is inserted.
Insert a disc. (Check that the DVD or,
audio CD indicator in the display
window is lit.)
No
The TV is not set to receive DVD
Select the appropriate video input
mode on the TV so the picture from
the DVD player appears on the TV
picture.
signal output.
Plug
screen.
No sound.
The video cable is not connected
Connect the video cable into the
securely.
securely.
Set
The equipment connected with the
audio cable is not set to receive DVD
Select the correct input mode of the
audio receiver so you can listen to the
sound from the DVD player.
signal output.
The audio cables
are
not connected
picture
is
poor.
The DVD
not start
does
player
playback.
The power of the equipment connected with the audio cable is turned off.
Turn on the equipment connected with
the audio cable.
The
Set the
is set to the
The disc is dirty.
The TV channels are not tuned in
An
unplayable
properly.
disc is inserted.
placed upside
The disc is not
down.
within the
placed
guide.
does not work
Video
tape
properly.
cannot be
jacks
securely.
The disc is
The remote control
Connect the audio cable into the
securely.
Digital Audio Output
wrong position.
The
"
The Progressive Scan is set to "On"
on the setup menu but is connected
to a standard (analog) television.
Progressive
(see page 19).
Scan to "Off
jacks
Digital Audio Output to the
correct position, then turn on the DVD
player again by pressing POWER.
Clean the disc.
Check tuning, carry out
tuning again.
Insert a playable disc. (Check the disc
type and Regional code.)
Place the disc with the
down.
playback
Place the disc on the disc
rectly inside the guide.
The disc is
dirty.
Clean the disc.
The
level is set.
Cancel the Rating function
the rating level.
Rating
There is an obstacle in the path of the
remote control and this unit.
Remove the obstacle.
The batteries in the remote control
are exhausted.
Replace
Is the cassette
Eject
compartment empty?
the
the batteries with
tray
or
side
cor-
change
new ones.
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
No NICAM sound
NICAM mode is not set
recording
properly.
properly.
Select "STEREO" by repeatedly pressing "AUDIO" on the remote control.
Make
sure
NICAM in the
menu
is set
to AUTO for the station to be recorded.
41
Specification
General
Power
requirements
AC
Power
consumption
17W
Dimensions
Mass
110-240V, 50/60 Hz
430 X 78.5 X 265
(approx.)
4.2
(approx.)
mm
(w/h/d)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
RF Modulator
UHF 22
(41˚F
to
95˚F)
display tape
-
68
(Adjustable)
System
Laser
Semiconductor
Video Head
laser, wavelength
Double azimuth 6
system
650
heads, helical scanning.
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
-6.0dBm,
more
Video
1.0
75
Vp-p,
than 47 kohms
ohms, unbalanced
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
sync., Mini Din
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
(Progressive Scan)
Audio
output (digital audio)
Audio output (optical audio)
0.5V(p-p),75Ω,RCAjackx1
3 V (p-p), 75 Ω, Optical connector
Audio
2.0 Vrms
output (analog audio)
(1 KHz,
0
dB),
x
4-pin
x
x
1
1
1
600 Ω, RCA
jack (L, R)x2
Outputs (VCR)
Audio
-6.0dBm, less than
Video
1.0Vp-p,
Design
and
specifications
are
Manufactured under license from
"DTS" and "DTS
42
Digital
Out"
are
subject
Dolby
to
change
Laboratories.
trademarks of
Digital
75
1 kohms
ohms, unbalanced
without notice.
"Dolby"
Theater
and the double-D
Systems,
Inc.
symbol
are
trademarks of
Dolby
Laboratories.
P/NO
:
3834RV0037T
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement