LG V1612W1Z, V161 Owner's manual

LG V1612W1Z, V161 Owner's manual
DVD PLAYER/
VIDEO CASSETTE
RECORDER
OWNER'S MANUAL
MODEL
:
V161
PAL
Before connecting, operating or adjusting this
product, please read this instruction booklet carefully
and completely.
Safety
Precautions
SERIAL NUMBER: The serial number is found
CAUTION
of this unit. This number is
RISK OF ELECTRIC SHOCK
DO NOT OPEN
unique
on
the back
to this unit and not
available to others. You should record
here and retain this
guide
as a
requested information
permanent record of your
purchase.
CAUTION: TO REDUCE THE RISK
OF ELECTRIC SHOCK
Model No.
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
___________________________________
Serial No.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
___________________________________
CAUTION
Most
This
lightning flash with arrowhead symbol within
equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
an
electric shock to persons.
concerning
the Power Cord
recommend
appliances
circuit;
they
be
placed upon
a
dedicated
That
is,
a
appliance
Check the
single
outlet circuit which powers only that
no additional outlets or branch circuits.
and has
specification page
of this owner's manual to be
certain.
Do not overload wall outlets. Overloaded wall
outlets, loose
damaged wall outlets, extension cords, frayed power
cords, or damaged or cracked wire insulation are
dangerous. Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the appliance,
and have the cord replaced with an exact replacement part
by an authorized services.
or
The exclamation mark within
an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the product.
WARNING: TO REDUCE THE RISK OF FIRE OR
ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT
Protect the power cord from
physical or mechanical abuse,
being twisted, kinked, pinched, closed in a door, or
walked upon. Pay particular attention to plugs, wall outlets,
and the point where the cord exits the appliance.
TO RAIN OR MOISTURE.
such
CAUTION: Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
Slots and
and to
from
The
uct
openings
ensure
in the cabinet
reliable
heating.
openings should
operation
are
of the
provided for ventilation
product and to protect
it
over
on a
be
bed, sofa, rug
should not be
placed
never
or
in
a
be blocked
by placing the prodproduct
other similar surface. This
built-in installation such
rack unless proper ventilation is provided
facturer's instruction have been adhered to.
case or
as a
or
book-
the
manu-
CAUTION:
This
To
Digital
Video Disc
Player employs
a
Laser
System.
proper use of this product, please read this
owner's manual carefully and retain for future reference,
ensure
should the unit
require maintenance, contact an authorized
procedure.
Use of controls, adjustments or the performance of procedures other than those specified herein may result in hazservice location-see service
ardous radiation exposure.
prevent direct exposure to laser
To
beam, do
not
try
to
open the enclosure. Visible laser radiation when open. DO
NOT STARE INTO BEAM.
CAUTION: VISIBLE AND INVISIBLE LASER RADIATION
WHEN OPEN AND INTERLOCKS DEFEATED.
CAUTION: The
dripping
such
2
as
apparatus shall not be exposed to water,
splashing and that no objects filled with liquids,
vases, shall be placed on the apparatus.
or
as
To disconnect power from the
cord plug. When installing the
is
easily
accessible.
mains, pull out the mains
product, ensure that the plug
Table of Contents
Introduction
Operation
SafetyPrecautions.........................2
Operationwithtape.....................20-23
Playingatape..........................20
.20
CM(CommercialMessage)Skip.
OPR (Optimum Picture Response).
20
InstantTimerRecording...................21
Timer recording using On Screen Display
22-23
.24-26
AdditionalOperation-VCRpart.
Hi-FiStereoSoundSystem................24
OnScreenDisplay(F.OSD)................24
TapeCounterMemoryStop................24
.25
VideoDoctor(Self-Diagnosis).
Lock(ChildLock)........................25
1WMode(Powersavemode)..............25
26
Recording from External Components
CopyingfromDVDtoVCR.................26
.27
GeneralPlaybackfeatures-DVDPart.
PlayingaDVDorVideoCD..................28
TableofContents..........................3
BeforeUse..............................4-5
AbouttheSymbolDisplay..............4
SymbolusedinthisManual...............4
NotesonDiscs.........................4
HandlingDiscs.........................4
StoringDiscs..........................4
CleaningDiscs.........................4
.4
SelectingtheViewingSource.
TypesofPlayableDiscs...................5
RegionalCode..........................5
.
.
.
.
.
.
.
.
.
.
.
.
FrontPanel...............................6
RemoteControl............................7
RearPanel................................8
Preparation
Connections............................9-10
ConnectingtoaTV.......................9
.10
ConnectingtoOptionalEquipment.
.11-15
BeforeOperation-VCRpart.
.11
TuninginavideochannelonyourTV.
.11
UsingyourVCRfortheveryfirsttime.
SettingtheclockManually.................12
Tosetthecoloursystem..................12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.13
TuninginTVStationsAutomatically.
.14
TuninginTVStationsManually.
.15
ChangingtheorderofTVStations.
DeletingTVStations.....................15
.16-19
BeforeOperation-DVDpart.
16
Displaying Disc Information on-screen
InitialSettings..........................16
GeneralOperation.......................16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
MenuLanguage......................17
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Additionalfeatures.......................28
3DSurround........................28
TimeSearch........................28
MarkerSearch......................28
LastSceneMemory..................28
ScreenSaver.......................28
.29
PlayinganAudioCDorMP3/WMAfile
ProgrammedPlayback....................29
.29
RepeatProgrammedTracks.
.29
ErasingaTrackfromProgramList.
.29
ErasingtheCompleteProgramList.
ViewingaJPEGfile.......................30
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
SlideShow.............................30
StillPicture............................30
.
LANGUAGE............................17
DiscAudio/Subtitle/Menu.
.
.
.
.
Howtousethemainmenu.................13
.
.
.
.
.
.
.17
DISPLAY..............................17
TVAspect..........................17
DisplayMode........................17
ProgressiveScan.....................17
TVOutputSelect.....................17
MovingtoanotherFile....................30
Zoom.................................30
Torotatepicture.........................30
PlayingaDivXMoviefile...................31
PlayingaDVDVRformatDisc...............32
AdditionalOperation.......................33
33
Controlling other TVs with the remote control
.
.
.
MaintenanceandService..................33
Reference
AUDIO................................18
LanguageandAreaCodeList...............34
LanguageCodeList......................34
.18
DolbyDigital/DTS/MPEG.
SampleFreq.(Frequency)..............18
.18
DRC(DynamicRangeControl).
Troubleshooting..........................35
Specification.............................36
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Vocal..............................18
LOCK(ParentalControl)..................18
Rating.............................18
Password(SecurityCode)..............18
AreaCode..........................19
OTHERS..............................19
PBC..............................19
AutoPlay..........................19
DivX(R)VOD........................19
AreaCodeList..........................34
Introducin
Before Use
To
ensure proper use of this product, please read this
owner's manual carefully and retain for future reference.
Notes
on
This manual
Handling
Discs
provides
information
on
the
operation and
require
maintenance of your DVD player. Should the unit
service, contact an authorized service location.
About the
"
Discs
Do not touch the
by
the
edges
so
playback side of the disc. Hold the disc
fingerprints do not get on the sur-
that
face. Never stick paper
or
tape
on
the disc.
Symbol Display
"
may appear on your TV
and indicates that the function
manual is not available
on
display during operation
explained in this owner's
that specific DVD video disc.
Storing Discs
playing, store the disc in its case. Do not expose
the disc to direct sunlight or sources of heat and never
leave it in a parked car exposed to direct sunlight.
After
Symbol
Used in this Manual
Note:
Indicates
special
notes and
operating
features.
Tip:
Indicates
tips
and hints for
A section whose title has
applicable only
ALL
making
the task easier.
of the following symbols
represented by the symbol.
one
to the disc
is
Cleaning Discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean
the disc with a clean cloth. Wipe the disc from the
center out.
All discs listed below
DVD
DVD and finalized DVD±R/RW
VCD
Video CDs
ACD
Audio CDs
MP3
MP3 files
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
WMA
WMA files
spray intended for older
DivX
DivX files
Selecting
the
You must select
VCR)
to view
vinyl
records.
Viewing Source
of your output
the TV screen.
one
on
sources
(DVD
or
If you want to view DVD deck output source:
Press DVD until DVD indicator in the display window
lights
TV
and
output
source
of DVD deck is viewed
on
the
screen.
If you want to view VCR deck output source:
Press VCR until VCR indicator in the display window
lights
TV
and
output
source
of VCR deck is viewed
on
the
screen.
Notes:
?
?
If you insert a disc while this unit is in the VCR
this unit will switch to DVD mode automatically.
If you insert a cassette tape without prevention tab
while this unit is in the DVD mode, this unit will switch
to VCR mode
4
mode,
automatically.
Before Use
(Continued)
Types of Playable
Notes
Discs
on
Copyrights:
It is forbidden
DVD
cast via
(8cm/12cmdisc)
al without
(VCD)
(8cm/12cmdisc)
Audio CD
(8cm/12cmdisc)
addition,
this unit
plays DVD±R/RW,
SVCD that contains audio
law to copy,
broadcast, show, broad-
rent copyrighted materipermission. This product features the copy
protection function developed by Macrovision. Copy protection signals are recorded on some discs. When
recording and playing the pictures of these discs picture
noise will appear. This product incorporates copyright
protection technology that is protected by method
Video CD
In
by
cable, play in public,
or
claims of certain U.S.
patents and other intellectual
property rights owned by Macrovision Corporation and
CD-R/RW and
titles, DivX, MP3, WMA,
and/or JPEG files.
This indicates
a product feature that is capable
playing DVD-RW discs recorded with Video
Recording format.
of
other
Use of this
rights
copyright protection
technology must be authorized by Macrovision
Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
owners.
CONSUMERS SHOULD NOTE THAT NOT ALL HIGH
Notes:
?
?
DEFINITION TELEVISION SETS ARE FULLY COMPAT-
Depending
the conditions of the
recording equipment or the CD-R/RW (or DVD±R/RW) disc itself,
some CD-R/RW (or DVD±R/RW) discs cannot be
played on the unit.
Do not
use
shaped
or
on
This unit
OUR TV SET COMPATIBILITY WITH THIS MODEL
625p
requires
discs and
recordings
playback quality.
Pre-recorded DVDs
set to these standards. There
are
optimal
automatically
many different types
of recordable disc formats
(including CD-R containing
MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure
compatible playback.
Customers should note that
permission
is
in order to download MP3 / WMA files
and music from the Internet. Our company has no
right to grant such permission. Permission should
always
be
sought
a
unit. This unit
can
rear
Notes
?
or
Regional
"ALL".
Codes
Most DVD discs have
bers in it
clearly
a
visible
must match your unit's
not play.
?
owner.
regional code printed on the rear of the
play only DVD discs labelled same as
of the unit
on
copyright
Code
Regional
This unit has
the
from the
globe
on
the
with
one or more num-
cover.
regional
code
This number
or
the disc
DVD
PLAYER, PLEASE CONTACT OUR CUS-
TOMER SERVICE CENTER.
to meet
are
PROBLEMS,
IT IS RECOMMENDED THAT THE USER SWITCH
OUTPUT. IF THERE ARE QUESTIONS REGARDING
certain technical standards in order to achieve
required
FACTS TO BE DISPLAYED IN THE PICTURE. IN CASE
OF 625 PROGRESSIVE SCAN PICTURE
THE CONNECTION TO THE 'STANDARD DEFINITION'
irregularly shaped CDs (e.g., heartoctagonal) since they may result in
malfunctions.
?
IBLE WITH THIS PRODUCT AND MAY CAUSE ARTI-
can-
If you try to play a DVD with a different regional code
from your player, the message "Check Regional
Code" appears on the TV screen.
Introducin
Front Panel
123
1.
Disc
2.
a
6.
7.
or
OFF.
(V/v)
Channel Programme
Selectors.
9.
closes the disc
tray.
Progressive
Starts
Scan is set to On
:
:
repeat
Child Lock is
:
is
engaged.
recording
or a
timer
programmed.
is
Indicates total
playing time/elapsed
time/current time.
tape
12. x
Stops playback.
DVD/VCR Selector
14. Video IN Jack
engaged.
DVD to VHS copy is in progress.
TV: Indicates TV mode. (See Notes on page
:
reverse
chapter/track.
13. DVD/VCR
A Cassette is in the VCR deck.
recording
fast
playback.
search. Winds the
VCR: VCR deck is selected.
REC: VCR
a
tape.
Press and hold for two seconds for
mode.
DVD+VCR is in timer
recording
to
11. M/>
Go to NEXT
mode.
Indicates
or
10. N
A disc is loaded in the DVD deck.
Indicates the
beginning of current chapter/track
chapter/track.
Press and hold for two seconds for
DVD: DVD deck is selected.
:
./m
search. Rewinds the
Shows the current status of the unit.
[P]:
VCR
PREVIOUS
window
Display
15
Tape Compartment
Go to
or
91011121314
Tape Eject
DVD
:
8
Remote Sensor
8.
PROG.
Opens
7
Point the remote control here.
POWER
4.
5.
6
disc here.
Switches the unit to ON
3.
5
Tray
Insert
1
4
15. Audio IN
21.)
(L/R)
Jacks
forwards.
a
fast forward
Remote Control
POWER
Switch this unit ON
or
TV Control Buttons
OFF.
TVPOWER:Turns
DVD/VCR select button
Selects
operational
TV AV: Selects the TV's
mode of
TV VOL +/--:
OPEN/CLOSE
close the disc
tray.
a menu.
Select
STOP
mode, for fast
recording
To control vertical tremble
into
picture
tape.
or
ENTER/OK
forward.
Access
tape during the
Access
Select
setup
menu.
the
of
menu
a
video CD
audio
an
language (DVD).
SUBTITLE
Select
subtitle
a
language.
ANGLE
Select DVD
camera
angle
if available
ZOOM
Enlarge
video
REC/ITR
image.
(O)
Record your
LOCK
input sources
(Child Lock)
Switch the Child Lock
on
into
tape.
and off.
TITLE
Display
the title
menu
of the disc if
available.
menu.
PROGRAM
CLEAR
Access
the
or remove
menu.
program
A-B/LP
program menu or a mark on the
MARKER SEARCH menu.
Reset tape counter to zero.
Repeat sequence.
Select the recording
speed
of the
tape.
REPEAT
Repeat chapter, track, title,
DVD disc.
AUDIO
SEARCH
on
or remove
Displays
point during playback.
track number
a
with PBC.
MARKER
a
of
RETURN
search.
Clear
menu
SETUP/ i
reverse
MARKER SEARCH
selection.
menu
DISC MENU
SKIP(./>)
Go to next chapter or track.
Returns to beginning of current
chapter or track or go to previous
chapter or track.
PAUSE/STEP (X)
Pause playback temporarily / press
repeatedly for frame-by-frame
playback.
PLAY ( N )
Starts playback.
STOP(A)
Stops playback.
Display
during
still.
Acknowledge
picture
search and Advances the tape during
the STOP mode, fast forward picture
Mark any
menu.
PR/TRK(+/-)
(m/M)
VCR: Rewinds the
item in the
an
Select channel programme of VCR.
To adjust tracking.
BACKWARD / FORWARD
DVD: Search backward
or
FGDE(left/right/up/down)
AV
for
Introducin
Display.
counter.
Switch between your TV's tuner
and the VCR's internal tuner.
source
TV's volume.
Shows you the current time
TV/VCR
input
Adjusts
Access the On-Screen
0-9 numerical buttons
Select
source.
CLK/CNT
Tape Eject.
Select numbered items in
33)
DISPLAY
EJECT
or
p.
offtheTV.
TV PR +/--: Selects TV's channel.
remote control.
Open
(see
on or
all.
RANDOM/CM SKIP
Play
tracks in random order.
CM SKIP
Remote Control
Remote control
Operation
Point the remote control at the remote
sensor
and press
Detach the
the buttons.
AAA AAA
Do not mix old and
new
batteries and
different
types of batteries such
alkaline,
etc.
as
never
mix
battery
remote
AAA)
installation
battery
control,
cover on
the
rear
of the
and insert two batteries
with 3 and #
(size
aligned correctly.).
standard,
7
Rear Panel
AERIAL
Connect the aerial
this
using
jack.
AUDIO IN
(Left/Right) (VCR IN AV1)
signals from an external
Receive the audio
AUDIO OUT
Connect to
source
to VCR.
(Left/Right) (DVD/VCR OUT)
amplifier, receiver or stereo system.
an
COMPONENT/PROGRESSIVE SCAN VIDEO OUT
(DVD
EXCLUSIVE
Connect to
a
TV with Y Pb Pr
AUDIO OUT
Connect to
(Y
Pb
Pr)
OUT)
inputs.
(Left/Right) (DVD EXCLUSIVE OUT)
amplifier, receiver or stereo system.
an
AC Power Cord
Connect to
S-VIDEO OUT
Connect to
COAXIAL
a
(DVD
EXCLUSIVE
TV with S-Video
Connect to
VIDEO IN
a
(VCR
(DVD/VCR OUT)
TV with video inputs.
IN
Receive the video
AV1)
signals
from
an
external
source
to VCR.
RF.OUT
Connect to your TV
Do not touch the inner
Electrostatic
discharge
using
pins
may
this
of the
cause
jack.
jacks
on
the
rear
panel.
permanent damage
to the unit.
power
OUT)
input.
(Digital audio out jack) (DVD EXCLUSIVE OUT)
digital (coaxial) audio equipment.
Connect to
VIDEO OUT
a
source.
Connections
Caution:
S-Video connection
Make sure this unit is connected directly to the TV.
Set the TV to the correct video input channel.
Do not connect this unit's AUDIO OUT jack to the
phono in jack (record deck) of your audio system.
Connecting
1.
S-Video
to a TV
2.
Basic connection
Connect the RF antenna cable from your indoor/
outdoor antenna to AERIAL jack on the rear panel
of this unit.
1.
Connect the supplied RF antenna cable from the
RF.OUT jack on the rear panel of this unit to your
television's Antenna Input (R).
2.
Rear of TV
COMPONENT VIDEO INPUT
/PROGRESSIVE SCAN
R
resolution
AUDIO INPUT
S-VIDEO INPUT
Pb
possible.
1.
Connect the COMPONENT/ PROGRESSIVE SCAN
VIDEO OUT
sponding
2.
jacks on the DVD Player to
jacks on the TV using the Y
in
Connect the Left and
Player
using
the
corre-
Pb Pr cable.
Right AUDIO OUT jacks of the
left/right in jacks on the TV
to the audio
the audio cables.
Notes:
Set the
Progressive to "On" on the setup
progressive signal, see page 17.
menu
does not work with the
Progressive
scan
connections
(yellow
VIDEO OUT
jack)
for
analog
or
video
S-VIDEO
Rear of TV
VIDEO
INPUT
COMPONENT VIDEO INPUT
/PROGRESSIVE SCAN
AUDIO INPUT
S-VIDEO INPUT
Y
Component Video
connection
Connect the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks on the DVD Player to
the corresponding in jacks on the TV using the
Y Pb Pr cable (C).
Connect the Left and
Player
C
A2
S
(Basic connection)
DVD exclusive out connection
using
"digital ready"
V
Rear of this unit
DVD
or
If your TV does not accept the Progressive Scan
for mat, the picture will appear scrambled if you try
Progressive Scan on the DVD Player.
A1
2.
high-definition
television, you may take advantage of the DVD
Player's progressive scan output for the highest video
AERIAL
Pr
1.
connection
a
connection.
VIDEO
INPUT
AERIAL
Right AUDIO OUT jacks of the
left/right in jacks on the TV
the audio cables.
If your television is
DVD
(RF)
jack on this unit to the
using the S-Video
the TV
to the audio
Player
Progressive Scan
(AV)
Connect the VIDEO jack on this unit's DVD/VCR
OUT to the video in jack on the TV using the video
cable (V).
Connect the Left and Right AUDIO jacks of this
unit's DVD/VCR OUT to the audio left/right in jacks
on the TV using the audio cables (A1).
on
Connect the Left and
using
on
When using the COMPONENT/PROGRESSIVE
SCAN VIDEO OUT jacks, set TV's input to COMPONENT VIDEO.
When using the S-VIDEO OUT jack, set the TV' s
input to S-VIDEO.
1.
input jack
(S).
cable
2.
DVD
Make one of the following connections, depending
the capabilities of your existing equipment.
Basic connection
Connect the S-VIDEO OUT
Right AUDIO OUT jacks of the
left/right in jacks on the TV
cables (A2).
to the audio
the audio
Rear of this unit
(DVD
exclusive out
connection)
Note:
If the TV has
an
S-video
input, connect the DVD player
using an S-video cable,
yellow video cable.
with the S-video cable. When
do not connect the
Prepa tion
Connections
Connecting
to
(Continued)
Optional Equipment
Rear of this unit
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic II/Pro Logic
R
Pr
R
Connect the Left and
AUDIO OUT
Right
DVD/VCR AUDIO OUT
or
L
OUT) jacks on this
to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the audio cables.
(DVD
EXCLUSIVE
unit
L
Pb
Y
Connecting to an amplifier equipped with two channel
digital stereo (PCM) or to an Audio/ Video receiver
equipped with a multi-channel decoder (Dolby
DigitalTM, MPEG 2 or DTS)
or
1.
Connect
of this unit's DIGITAL AUDIO OUT
one
(COAXIAL) to
amplifier. Use
the
an
jack
corresponding in jack on your
optional digital (coaxial) audio
DVD/VCR OUT
cable.
2.
You will need to activate this unit's
"AUDIO"
(See
Digital
A
DVD exclusive out
on
page
digital output.
18).
Multi-channel sound
digital multi-channel connection provides the best
quality. For this you need a multi-channel
sound
Audio/Video receiver that
supports
one or more
COA
of the
L
IAL
DIGITAL INPUT
R
AUDIO INPUT
audio formats
supported by your unit (MPEG 2, Dolby
Digital and DTS). Check the receiver manual and the
logos on the front of the receiver.
Amplifier (Receiver)
Warning:
Digital multi-channel connection
(DVD exclusive out connecttion)
Due to the DTS
Licensing agreement, the digital output
digital out when DTS audio stream is
will be in DTS
selected.
Notes:
If the audio format of the
the
capabilities of
produce a strong,
digital output
does not match
your receiver, the receiver will
distorted sound or no sound at all.
Pr
R
R
L
To
see
the audio format of the current DVD in the
On-Screen
Display,
press AUDIO.
L
Pb
Y
Manufactured under license from
"Dolby",
Dolby Laboratories.
Logic" and the double-D symbol are
of Dolby Laboratories.
"Pro
trademarks
DTS and DTS
Theater
10
Digital Out
Systems, Inc.
are
trademarks of
Digital
Rear of this unit
Before
Operation-VCR part
in
Tuning
a
video channel
on
your
TV
is the channel
(RF output channel)
which your TV receives picture and sound
the DVD+VCR through the RF cable.
If you have used
channel is
on
a
signals
for
optimum
video
play-
To make
as
tuning
TV
shown "ACMS"
display
on
stations, please
(see p.13).
your TV.
Perform the
following steps only if interference appears
in the TV picture after you have moved to a different
area or a new station has started broadcasting in your
area, or if you change the connection from RF connection to AV
connection,
or
vise
1.
Turn
2.
Set the vacant
position
Press POWER
on
on
DVD+VCR and TV.
the remote control to enter the
stand
by mode (the
dimmed).
4.
clock indicator will be
Press and hold PROG.
for
more
your TV.
on
(v
or
V
)
on
the DVD+VCR
than 4 seconds.
RF 36 will appear in the display.
following picture will be displayed
The
on
the TV
screen.
RF
If the
is
5.
picture
is snowy,
CHANNEL
Press PROG.
(v
video channel to
68 which is not
or
36
move
clean, press POWER
V)
to
step
5. If the
picture
on
the DVD+VCR to finish.
on
the DVD+VCR to set the
position between 22 and
occupied by any local station in your
a
vacant
area.
Note:
The RF channel will not
change
until
step
6 has
been executed.
6.
Press POWER to store the
new
into the DVD+VCR memory.
Now tune your TV set to the
RF video channel
new
DVD+VCR RF
channel.
Note
If the TV
TV.
picture
was
clear in
ACMS
Pr-12
ACMS
versa.
36
step 4, do
the TV
when
Following picture
you have just connected your video recorder for the
very first time.
SCART lead you will not have to
already pre-tuned
will
on
from
TV, simply select the AV channel. The AV
tune your
3.
the very first
time
Video channel
back
Using your VCR for
not retune your
screen
follow
stages
3 to 4
Prepa tion
Before
Setting
Operation-VCR part
the clock
To set the colour system
Manually
The clock in your DVD+VCR controls time and date settings for your DVD+VCR.
1.
1.
Press i.
2.
The main
3.
Press i.
Press 1
menu
or
will appear
on
the TV
screen.
2 to select the SYS and press
ENTER/OK.
Press b or B to select SET.
Press ENTER/OK.
4.
Press 3
or
4 to select
according
to the COLOUR
system used.
HHMMDDMMYY
--
:.
-
-
--
--
--
---
.
SYS
12
i
SET
SYS
fOSD
ON
OFF
2.
Use the v
V on
or
the remote control to alter the
5.
day
of the week will appear
automatically
or
4 to select
according
to the RF AUDIO
used.
Please note your DVD+VCR uses a 24 hour clock.
1pm will be displayed as 13:00.
e.g.
The
Press 2 to select the RF AUDIO.
Press 3
HOURS, MINUTES, DAY, MONTH and YEAR.
i
when
you enter the year.
SYS
SYS
fOSD
ON
OFF
i
HHMMDDMMYY
8
:.
0010106SUN
6.
.
12
i
SET
3.
If you make
a
mistake press b
or B
correct details.
4.
Press i to return to
12
a
TV
picture.
and enter the
Press i to
remove
the
menus
from the TV
screen.
Before
How to
Operation-VCR part
This DVD+VCR
The
menus are
be
easily
can
displayed
menus
the main
use
Tuning
menu
programmed by using
the
by
If the TV broadcast
signal
Automatically
is weak your DVD+VCR may
not detect the necessary information and will not be able
to store them correctly. To overcome this problem please
on screen.
controlled
in TV Stations
the Remote Control
Handset.
turn to the MANUAL TUNING section
1.
Switch
on your TV set and DVD+VCR
POWER button.
2.
Press i button.
by pressing
the
1.
2.
The main
menu
will appear
on
the TV
Press POWER to turn
on
page 14.
on
Press i button.
The main menu will appear on the TV
Press 1 or 2 to select the ACMS.
screen.
Prepa tion
your DVD+VCR.
screen.
Press ENTER/OK.
SYS
SET
fOSD
ON
OFF
ACMS
Pr-12
ACMS
SET
SYS
Pr-12
ACMS
fOSD
ON
OFF
REC
-
Timer
PR SET
ACMS
SET
SYS
-
-
-
-
recording setting (see
Manual
tuning setting (see
22).
3.
14).
p.
(Automatic Channel Memory
System) (see p. 13).
setting (see
To set the Colour TV
1 W ON/OFF
-
-
p.
F.OSD ON/OFF
-
a
problem
(see
p.
p.
menu.
3.
To
PR-01
00
PR-02
C04
00
PR-03
E
Pr-12
ACMS
display
the
operational
p.
4.
The TV STATION TABLE will appear when
completed.
Press i to
24).
improve the playback picture
(see p. 20).
Appear when playback only.
save
your
settings.
To
the
menu
on
Press 1 and 2 to select the desired
Press ENTER/OK and
4.
00
C03
03
S
with your VCR
the DVD
change
language
(See the Menu Language on page 17.)
can
C02
02
12).
Tip
You
Press i to return to
a
tuning
25).
(see
-
01
25).
mode of your VCR
(OPR)
to start the automatic
again
12).
System (see
Power Save Mode
To check
(see
p.
Press OK
process.
ACMS
Date & clock
(Dr.)
p.
Pr-12
ACMS
use 3 or
TV
picture.
menu.
4 to select.
setup
02
C03
00
PR-02
03
C04
00
PR-03
04
C05
00
PR-04
05
C06
00
PR-05
06
C07
00
PR-06
07
C08
00
08
C09
00
P
SET
R
PR-07
PR-08
MOVE
:
DELETE
:
,
tuning
is
Before
in TV Stations
Tuning
In certain
Operation-VCR part
areas
of the
Manually
country broadcast signals may
be too weak for your DVD+VCR's automatic tuning
process to find or assign TV stations correctly.
You must tune in these weaker broadcast stations
ually
1.
MFT
STATION
CHANNEL/CABLE
:
AV
P
SET
R
6.
Press i.
menu will appear on the TV
Press 1or2toselectthePRSET.
CH
C04
man-
in order for your DVD+VCR to store them.
The main
PR
04
Press 2 to select STATION
that you may
so
name
your TV station.
Press ENTER/OK.
screen.
Press ENTER/OK.
7.
Use 3
or
station
name.
Use 1
or
4 to select letters and numbers for the
2 to
move
back and forth between
characters.
Press ENTER/OK.
Pr-12
ACMS
SET
SYS
fOSD
ON
OFF
PR
CH
01
MFT
STATION
00
PR-03
AV
:
CH
MFT
C04
00
STATION
P
SET
R
8.
CHANNEL/CABLE
PR
04
Press
i, confirm the station placement.
P
SET
R
2.
Press i.
The station table will appear.
3.
Press 3
or
PR
CH
MFT
04
C04
00
4 to select the programme number that
you want to tune
(for example,
PR
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
05
06
07
08
--
--
-----
--
--
-----
--
--
-----
--
--
-----
P
SET
R
MOVE
:
DELETE
:
04).
P
SET
R
If you wish to
3 8.
stages
manually
01
C01
00
PR-01
02
C02
00
PR-02
03
C03
00
PR-03
05
,
07
Press ENTER/OK.
08
Press AV to select C
(Standard stations)
or
S
tune other stations
repeat
-
06
4.
STATION
(Cable
--
--
-----
--
--
-----
--
--
-----
--
--
P
SET
R
-----
MOVE
:
DELETE
:
,
stations):
C02
-
C69, S01
-
9.
S41.
Enter the channel number of station that you want to
tune,
4 to find the
use 3 or
PR
CH
MFT
04
--
required
station.
----
:
AV
P
SET
R
5.
Searching
will
stop when it locates
a
stations.
Press 2 to select MFT.
Control the fine
tuning
of the station
by using
again.
new
TV station has
DVD+VCR.
STATION
CHANNEL/CABLE
Press i
Your
3 or 4.
now
been tuned into your
Before
Operation-VCR part
the order of TV Stations
Changing
tuning TV stations into your DVD+VCR you may
change the order in which they are stored without having to retune them again. The instructions given
on this page will show you how you can simply move
Deleting TV Stations
After
After
wish to
wish to delete
tuning
TV stations into your DVD+VCR you may
a station.
The instructions
you
easily
can
given on this page will show you how
delete any unwanted TV stations.
them into your desired order.
1.
1.
Press i.
The main
Press 1
will appear on the TV
2 to select the PR SET.
menu
or
menu will appear on the TV
Use1or2toselectthePRSET.
screen.
PR
PR
CH
MFT
STATION
00
PR-03
Pr-12
ACMS
SET
CH
01
SET
:
PR-03
CHANNEL/CABLE
ON
OFF
CHANNEL/CABLE
STATION
00
SYS
fOSD
SYS
ON
OFF
MFT
Pr-12
ACMS
fOSD
screen.
Press ENTER/OK.
Press ENTER/OK.
01
Prepa tion
Press i.
The main
:
AV
P
SET
R
AV
P
SET
R
2.
2.
Press i.
Press i.
Press 3
want to
or
4 to select the programme number you
3.
Press 3
or
4 to select the programme number you
want to delete.
(for example, PR-03).
move
(for example, PR-01)
Press 2.
02
C02
00
PR-02
01
C01
00
PR-01
01
C01
00
PR-01
03
C04
00
PR-04
02
C02
00
PR-02
02
C02
00
PR-02
04
05
03
04
05
06
07
08
C04
00
04
PR-04
--
--
-----
05
--
--
-----
06
--
--
-----
07
--
--
-----
08
P
SET
R
MOVE
:
DELETE
:
C04
00
--
-----
--
--
-----
--
--
-----
--
--
-----
07
08
Press 3
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
--
--
-----
--
--
-----
--
--
-----
a
short
--
--
05
07
P
SET
R
08
other TV stations
move
01
C01
00
PR-01
02
C02
00
PR-02
03
C04
00
PR-04
--
--
-----
--
--
-----
--
--
-----
--
--
P
SET
R
remove
C02
--
C03
:
:
,
the
00
repeat stages
PR-04
--
-----
00
PR-03
--
--
-----
--
--
-----
--
--
--
--
P
SET
R
Press ENTER/OK.
The selected programme will be moved to the
programme number.
Press i to
-----
MOVE
DELETE
-----
06
5.
--
If you wish to delete other TV stations
04
08
08
-----
--
3-4.
03
07
07
--
while, the selected station will be
02
06
06
-----
--
deleted.
05
04
--
Press 1.
After
4 to select the programme number you
want to move to (for example, PR-05).
or
If you wish to
1-4.
PR-03
--
P
SET
R
,
04
4.
-----
00
P
SET
R
4.
3.
--
C03
06
PR-04
--
--
new
repeat stages
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
5.
Press i to
remove
the
-----
-----
MOVE
:
DELETE
:
menus
,
from the TV
screen.
Before
Operation-DVD part
Disc Information
Displaying
on-screen
You
can
loaded
display
various information about the disc
on-screen.
Initial
see
1.
Press DISPLAY to show various
playback
To
information.
The items
type
displayed differ depending
playing status.
or
on
the disc
Settings
By using the DVD Setup menu, you can make various
adjustments to items such as picture and sound. You can
also set a language for the subtitles and the Setup menu,
among other things. For details on each Setup menu item,
pages 16 to 19.
display
and exit the Menu:
Press SETUP to
display
the
A second press of
menu.
SETUP will take you back to initial
screen.
To go to the next level:
Press B on the remote control.
1/3
To go back to the previous level:
Press b on the remote control.
1/12
0:20:09
General
1 ENG
ABC
1.
Operation
Press DVD
on
1/1
the remote control.
LANGUAGE
Menu
3D SUR
2.
You
select
can
change
Title
an
(Track)
--
Original
Disc Subtitle
Off
Disc Menu
Original
item
select the
or
English
Language
Disc Audio
by pressing v / V and
setting by pressing b / B.
Current title
(or track)
number/total
Move
number of titles
(or tracks)
Current chapter
number/total number of
Chapter
chapters
Time
Elapsed playing
time
Audio
language
--
--
Selected audio
--
Subtitle
Angle
Sound
--
--
--
2.
or
channel
angle/total
number of
angles
button is
a
few
seconds,
move
the
5.
appears.
shows the current
item,
option
then press B
as
well
as
setting for the
setting(s).
alternate
Use v / V to select the second desired
press B to
on-screen
menu
to the second level.
screen
selected
4.
for
Setup
Use v / V to select the desired
The
Selected sound mode
pressed
display disappears.
no
3.
to
Note:
If
Press SETUP.
The
Selected subtitle
Selected
Select
move
option
Use v / V to select the desired
setting
then press
ENTER/OK to confirm your selection.
Some items require additional steps.
6.
16
Press SETUP
then
to the third level.
or N
exit the
Setup
menu.
Before
Operation-DVD part
LANGUAGE
Progressive
Progressive
provides
the
highest quality picflickering.
If you are using the Component Video jacks for connection to a TV or monitor that is compatible with a progressive scan signal, set Progressive Scan to On.
LANGUAGE
Menu
Scan
Scan Video
tures with less
English
Language
Disc Audio
Original
Disc Subtitle
Off
Disc Menu
Original
To turn On
progressive
scan:
Connect
Move
Menu
component out of this unit to the input of your
monitor/television, set your television or monitor to
Select
Component Input.
Language
Select
language for the
display.
a
VCR and DVD's
setup
menu
1. Select
"Progressive
Scan"
on
the DISPLAY
menu
then press B.
and information
DISPLAY
Disc Audio / Subtitle / Menu
Select the
TV
DVD
language you prefer
(disc audio), subtitles, and the disc
Refers to the
disc
recorded.
was
Mode
Progressive
for the audio track
Original:
Aspect
Display
Scan
On
Off
menu.
original language
in which the
Prev.
Other:To select another
press number
buttons then ENTER/OK to enter the corresponding
language,
according to the language code list in
the reference chapter (see page 34). If you enter the
wrong language code, press CLEAR.
4-digit
2. Select "On"
3.
number
Pressing
scan
using
Move
Enter
the v / V buttons.
ENTER/OK will set this unit to
Progressive
mode.
Caution:
Once the
setting for progressive scan output is entered,
image will only be visible on a progressive scan
compatible TV or monitor. If you set Progressive Scan to
an
DISPLAY
On in error, you must reset the unit.
DISPLAY
TV
Aspect
Display
Progressive
1)
16:9
Mode
Scan
Remove any disc from the unit and close the disc
on the display
tray. See that "DISC" is displayed
Widescreen
window.
Off
2)
Press STOP
on
the remote control and hold it for five
seconds before
Move
releasing it. The video output will be
restored to the standard setting and a picture will
once again be visible on a conventional analog TV or
Select
monitor.
TV
Aspect
4:3
:
16:9
DVD
Select when
:
a
Select when
Display
Display
Mode
Mode
standard 4:3 TV is connected.
a
16:9 wide TV is connected.
DVD
setting
works
only
when the TV
Aspect
mode is set to "4:3".
Letterbox:
Displays a wide picture with
portions of the screen.
bands
on
the
upper and lower
Panscan:
entire
Automatically displays the wide picture
and cuts off the portions that do not
screen
on
the
fit.
17
Prepa tion
Before
Operation-DVD part
LOCK
AUDIO
Each DVD disc has
variety of audio output options.
options according to the type of
a
Set this unit's AUDIO
audio
system you
(Parental Control)
LOCK
use.
Rating
Unlock
Password
New
Area Code
AE
AUDIO
Dolby Digital
Bitstream
DTS
Bitstream
MPEG
PCM
Sample Freq.
48KHz
DRC
On
Vocal
On
Move
Select
Rating
Move
Blocks
Select
playback
Not all discs
Dolby Digital
DVD
/ DTS / MPEG
DivX
1. Select
Bitstream: Select "Bitstream" if you connect the
DVD+VCR's DIGITAL AUDIO OUT jack to an amplifiother
er or
equipment
with
a
Dolby Digital,
DTS
Off
3. Select
If your receiver
or
select 48 kHz. When this choice is
amplifier
is NOT
capable
of
handling
made, this unit automatically converts any 96 kHz signals to 48 kHz so your system can decode them.
If your receiver or amplifier is capable of handling 96
kHz signals, select 96 kHz. When this choice is made,
this unit passes each
further processing.
type of signal through without any
Check the documentation for your
amplifier
to
verify
its
thanks to
digital
audio
technology. However,
dynamic range of the
you may wish to compress the
audio output (the difference between the loudest sounds
quietest ones).
a
rating
from 1 to 8
This allows you to listen to a
losing clarity of sound.
lower volume without
Set DRC to On for this effect.
You
can
enter
or
DVD
Set to On
playing.
only
when
a
multi-channel karaoke DVD is
The karaoke channels
mal stereo sound.
18
(1)
the v / V buttons.
has the most restrictions
is the least restrictive.
selection,
change password.
1. Select Password
on
2. Follow
shown above
step
2
as
the LOCK
menu
then press B.
(Rating).
change the password, press ENTER/OK when the
"Change" option is highlighted. Input a password and
press ENTER/OK. Enter it again and press
ENTER/OK to verify.
3. Press SETUP to exit the
If you
forget
your
forget your password,
following steps:
1.
Press SETUP to
2.
Input
the
on
the disc mix into
nor-
menu.
password
If you
6-digit
ENTER/OK. The
Vocal
one
using
Password
DVD
format, you can hear a program's soundtrack in the most accurate and realistic presentation
movie at
then press B.
4. Press ENTER/OK to confirm your rating
then press SETUP to exit the menu.
With the DVD
and the
menu
To
(Dynamic Range Control)
possible,
a
Rating 1-8: Rating
rating eight (8)
capabilities.
DRC
the LOCK
Unlock: If you select unlock, parental control is not
active and the disc plays in full.
96 kHz
signals,
on
and
DVD
Sample Freq. (Frequency)
"Rating"
Input a password and press ENTER/OK. Enter it
again and press ENTER/OK to verify. If you make a
mistake before pressing ENTER/OK, press CLEAR.
/
(for DTS): If you select "Off", the DTS signal is
output through the DIGITAL AUDIO OUT jack.
not
their content.
access the LOCK options, you must input the
password you have created. If you have not yet
entered password, you are prompted to do so.
or
MPEG): Select when connected to a two-channel digital stereo amplifier.
DVDs encoded in Dolby Digital or MPEG will be
automatically downmixed to two-channel PCM audio.
(for Dolby Digital
on
rated.
2. To
MPEG decoder.
PCM
of rated DVDs based
are
display
you
the
can
clear it
Setup
using
menu.
number "210499" and press
password is cleared.
the
Before
Operation
-
DVD
DivX(R)
DVD
Area Code
Enter the Area Code whose standards
rate the DVD video
reference
1.
part
based
disc,
chapter (see
Select "Area Code"
used to
We
the LOCK
menu
then press
B.
Follow
3.
Select the first character
4.
Press B and select the second character
2
step
shown left
as
(Rating).
using
using
the DivX
VOD service. For
more
informa-
tion, visit www.divx.com/vod.
1.
2.
you the DivX VOD (Video On Demand)
code that allows you to rent and purchase
provide
registration
videos
34).
page
on
were
the list in the
on
VOD
2.
Select
"DivX(R)
VOD"
option
then press B.
Press ENTER/OK while "Select" is selected and the
registration code will appear.
Use the registration code to purchase
v / V buttons.
using
videos from DivX
v / V buttons.
or
rent the
VOD service at
www.divx.com/vod. Follow the instructions and
5.
Press ENTER/OK to confirm your
area
code
download the video onto
selection.
a
disc for
playback
on
this
unit.
3.
OTHERS
Press ENTER/OK to exit.
Note:
The PBC and Auto
Play
and
Divx(R) settings
can
be
changed.
All the downloaded videos from DivX
played
back
on
VOD
can
only
be
this unit.
OTHERS
PBC
On
.
Auto
Off
Play
DivX(R)
VOD
Select
Select
Move
PBC
Set
VCD
Playback
Control
(PBC)
On: Video CDs with PBC
to On
or
Off.
are
played according
are
played
to the
PBC.
Off: Video CDs with PBC
the
same
way
as
Audio CDs.
Auto
You
can
cally
set up the DVD+VCR
starts
If Auto
DVD
Play
Play
playing
so a
DVD disc automati-
whenever the DVD is inserted.
mode is set to
On, this DVD player will
search for title that has the
then
play
back the title
longest playback
automatically.
time and
Note:
The Auto
Play
function may not work for
some
DVDs.
19
Prepa tion
with
Operation
Playing
You will
5.
tape
a
only
tape
be able to load and
eject
video cassettes
when your DVD+VCR is plugged into the mains.
Your DVD+VCR may also playback recordings from
NTSC
tapes (on
Getting
When
PAL
better
a
To
TV).
appear
If distortions
6.
on your TV.
Press POWER to turn
on your DVD+VCR.
Insert the video cassette into your DVD+VCR.
The video cassette should have the window side
up and the
Press N to start
a
arrow
facing
away from you.
your tape.
video cassette which has had its record
protection tab removed, playback
automatically.
of the cassette will
3.
automatically adjust
picture quality.
Press PAUSE/STEP
by
the
picture.
repeatedly to advance
a
the
tape
frame.
can be paused for up to 5 minutes. After 5
minutes your DVD+VCR will stop the tape to
prevent damaging the tape or your DVD+VCR
Tapes
.
picture quality
can
Press N to continue
be
improved slightly by using
playing
your tape.
Double
speed playback
Press the "N" button during normal
playback. The tape will play back at double speed
Press the "N" button to return to
playback.
playback.
tape is playing press CM SKIP
control to
commercial
skip
(or
on
the remote
another programme
material).
press CM SKIP to
4 Press
120 seconds
5 Press
150 seconds
6 Press
180 seconds
OPR
(Optimum
Picture
skip:
Response)
This feature
automatically improves playback picture
quality by adjusting your DVD+VCR to the condition
the
tape. Please
appear in
play
note that the OPR icon
that mode when
1.
Press i.
2.
Press b
3.
Press ENTER/OK.
4.
Press
3
or
B to select
or 4
playing
repeatedly
to select:
SHARP. Please note you may
playback
at
speed
playing
5.
a
tape.
Press i return to
screen.
back press either BACKWARD or
FORWARD to this will enable you to rapidly wind the
tape see where you are on the tape.
During playing
Logic search:
During fast forwarding or rewinding press and hold
m or M the picture will be played back at 7 times
normal playback speed.
Pr-12
P
SET
R
fOSD
ON
OFF
ACMS
a
(
)
will
of
only
tape.
(OPR).
Picture search:
20
reduce them
(Commercial Message) Skip:
While
and without sound.
normal
picture,
This feature enables you during playback of a tape to
skip a commercial break in a few seconds, then resume
vorV.
4.
in the
3 Press 90 seconds
If you press FORWARD, the picture will be slowed
down at about 1/19 times the normal playback.
Still
seen
2 Press 60 seconds
the best
Press PAUSE/STEP to still
frame
be
1 Press 30 seconds
Your DVD+VCR will
give
CM
Repeatedly
AUTO TRACKING
to
can
Press STOP to end
normal
playing
start
tracking
to the status of
If the end of the tape is reached, your DVD+VCR will
stop playback automatically, rewind, stop, eject the
tape.
sure
If you load
shuttle, the noise bars may
picture according
Press EJECT.
Tu rn
2.
the
on
withvorV.
that you have correctly connected your
DVD+VCR as described earlier in this book.
facing
shuttle, press the
tape.
been removed.
Make
off the slow motion and
slow motion and
During
picture
playback started, the
automatic tracking function works to get the best possible picture automatically. If the quality of the recording is
poor, repeatedly press 3 or 4 on the remote control to
manually adjust the tracking until any distortions have
1.
s witch
desired function.
cassette is inserted and
a
playback, Shuttle :
During playing back or still picture press F or G.
You can reach the following playback speeds.
(REV, PB 5-, PB 1-, Still, SLW, PLAY, 2PLY, CUE)
Slow motion
OFF
SOFT
SHARP
OFF, SOFT
only
or
set OPR when
Operation
with
Instant Timer
tape
7.
Recording (ITR)
Your DVD+VCR allows you to make
of simple methods:
recordings using
ately
for
runs
out.
set
a
incorporates Long Play (LP)
which
enables you to record up to twice the amount of time on
a video cassette. For example an E-180 will record up
to 180 minutes
using Standard Play (SP); using LP you
will be able to record up to 360 minutes. Please note
there will be a slight loss in picture and sound quality
when
1.
Make
sure
that you have correctly connected your
as described earlier in this book.
Press POWER to turn
2.
Insert
on
your DVD+VCR.
video cassette with
a
protection
tab into your
DVD+VCR.
The video cassette should have the window side
3.
facing
up and the
Press
3 or 4
arrow
facing
away from you.
to select the programme number you
wish to record.
You may also directly select programme number
using the numbered buttons on the remote control.
4.
If you wish to record directly from the AUDIO L/R
(VCR IN AV1)/ VIDEO (VCR IN AV1) or AUDIO IN
(L(MONO)/R)/ VIDEO IN terminals repeatedly press
AV until the socket you wish to record from is
displayed.
AV 1 for
VIDEO
recording from AUDIO L/R (VCR IN AV1)/
(VCR IN AV1) terminals on the rear of your
unit.
AV 2 for
recording
from AUDIO IN
VIDEO IN terminals
5.
on
(L(MONO)/R)/
the front of your unit.
Press LP if you wish to record in
Long Play
or
Standard
Play.
produce improved picture and sound quality,
however LP will provide twice as much recording
SP will
time
6.
as
SP.
Press REC/ITR
Press REC/ITR
on
on
the remote to start
recording.
the remote several times.
Each successive press will increase the record time
30 minutes until you reach a maximum of 9
by
hours.
8.
Press STOP to end
recording.
Press EJECT.
Notes:
If you do not wish to record
pen quite easily
tab on the back
It is
DVD+VCR
recording.
paused for up to 5 minutes; RECP will
when a tape is paused. After 5 minutes
your DVD+VCR will stop recording to prevent
damaging the tape or your DVD+VCR.
LP.
using
unwanted
be
Tapes
be displayed
can
Recording (ITR) start recording immediperiod of time or until the video cassette
Your DVD+VCR
recording
Press PAUSE/STEP to continue
a
variety
Instant Timer
Press PAUSE/STEP to avoid
scenes.
on a tape (this can hapby accident!) remove the protection
edge of the video cassette.
possible to record on a video cassette
protection tab removed by covering
record
with self adhesive
with the
the hole
tape.
Remember you can record one programme while
watching another by starting your instant recording,
press TV/VCR to select TV mode and then
a different channel on your TV.
selecting
Operation
with
Operation
tape
recording using On Screen
Display
Timer
PR
DATE
PR-03
You may set up to seven timer record events
within one month of the current date.
TIME
3
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
--
::
--
-~
--
::
--
-~
::
--
--
-~
::
--
--
-~
::
--
--
-~
::
--
--
-~
--
SP
SP
SP
SP
SP
SP
SP
DLYSUMOTUWETHFRSA
OK i
Note:
Before
that you have set the
DVD+VCR clock correctly and you know which stations
you have tuned TV stations on your DVD+VCR.
setting
the timer make
sure
6.
Use v/V/1/2 buttons to enter the
recording
start and
end times of the programme that you wish to record.
Please note your DVD+VCR uses a 24 hour clock.
1pm will be displayed as 13:00.
e.g.
1.
Insert
a
video cassette with
protection
PR
tab into your
The video cassette should have the window side
facing
2.
up and the
away from you.
facing
arrow
DATE
PR-03
DVD+VCR.
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
).
7.
Press B to select the
Press v
PR
DATE
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
--
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
IP,
SP
--
SP
--
SP
--
SP
--
PR
PR-03
Press ENTER/OK to start
setting
the timer record
event.
Use the PR/TRK
(v/V)
to enter the station that you
wish to record then press 2.
PR
DATE
PR-03
TIME
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
SP
--
i
Note:
If all timer record events are full press v or V to select
the event that you wish to remove and replace.
Press b to delete the event.
Use the PR/TRK
(v/V)
to enter the date of the
programme.
If you press ENTER/OK before
you may select one of the
recording features.
Press 1
or
2 to
entering the date
following automated
select, then press ENTER/OK
to
confirm.
DLY To record every day (except
at the same time.
Saturday
and
Sunday)
SU~SA
To record at the
22
tape is left and
if necessary, to
OK i
,
same
time every week.
tape speed (SP,
LP).
speed from SP to LP,
plete recording the program.
SP
--
recording speed.
V to select the desired
switches
SP
--
or
or
IP mode determines how much
SP
--
DELETE:
5.
::
i
Press ENTER/OK.
4.
SP
~
--
Press i.
Press1or2toselectREC(
3.
TIME
41 4 ::
00 1 5 30
--
DATE
TIME
41 4 ::
00 1 5 30
~
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
--
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
::
--
-~
--
--
--
--
--
--
SP
SP
SP
SP
SP
SP
SP
i
com-
Operation
with
tape
recording using On Screen
Display (Continued)
Timer
8.
w atch a
DVD while
performing
a
timer
recording,
press DVD to select DVD mode.
Press i to set another timer record event and follow
steps
3 to 7.
Check that the timer event details
Press i return to
are
correct.
screen.
If PLEASE CHECK is
incorrectly
9.
To
displayed, you have entered
and will need to re-enter the data.
Press POWER to switch your DVD+VCR to Timer
Standby mode.
Note:
The 1W Mode is not available in the
mode for the timer
standby
recording.
The timer
symbol (
) will appear in the display
window while your DVD+VCR waits to make the
recording.
10. Press POWER to end timer
recording.
Notes:
The DVD+VCR will
Timer
Recording
During
timer
automatically
power off when
ends.
recording standby mode, the DVD
operated. To use the
and
VCR mode cannot be
DVD+VCR, press POWER. After you use the DVD or
VCR, press POWER again to put the VCR into timer
recording standby
mode.
If at
a later date you wish to delete or change any of
settings in timer event memory you may do so
without having to enter all the timer event information
again. Simply display the timer event screen. Use v
the
or
V to select the event that you wish to delete
or
change.
Press b to delete the event...or
Press ENTER/OK to
change;
then press b
or
B to
select; Station, Date, Start and End times and
recording speed.
Press v
or
V to enter the correct
information.
If Timer record events
Make
sure
Overlap...
that the
events do not
preset times of the timer recording
overlap. If they do, the earlier pro-
gramme will
always
Example:
Programme
1 is
be
given priority.
programmed
to start at 16:00 and
programmed
to start at 16:30 and
end at 17:00.
Programme
end
2 is
at 17:30.
(In this case, Programme 1 will be recorded in its
entirety, but only the last 30 minutes of Programme
will be recorded.)
2
Operation
Additional
Operation
Hi-Fi Stereo Sound
Your VCR will record and
VCR part
-
Tape Counter Memory Stop
System
playback
Hi-Fi stereo sound.
This allows you to record and playback the sound in several different ways. Video cassettes recorded on your
VCR will have
normal
a
audio track and two VHS
mono
Hi-Fi stereo audio tracks. These stereo tracks allow you
to make audio recordings in Hi-Fi stereo or bilingual
mode from
disc
a
TV
broadcast,
stereo audio
The
Digital Tape
play
window instead of the time
displayed on the disby pressing CLK/CNT
on the remote control. The Digital Tape Counter indicates the relative positions of recordings on the tape.
1.
system, video
be
can
Press CLK/CNT.
Press CLEAR to set the counter to 0:00:00.
another Hi-Fi VCR.
or
Counter
Press N
or
start
recording.
The
1.
Your VCR allows you to enjoy broadcasts with standard stereo, bilingual and mono sound. The particular
type of sound received
briefly displayed
on
that recorded will be
or
the TV
for
screen
a
couple
of
seconds:
and
automatically
mono
recorded
tracks of the video
on
the Hi-Fi stereo
tape.
BIL
Both audio channels will be recorded
stereo tracks. The
will be recorded
primary language
on
the
mono
on
the Hi-Fi
channel
(left)
track of the video
tape.
MONO
The sound is recorded
mono
2.
track of the video
Press AUDIO
the Hi-Fi tracks and the
on
tape without any separation.
until the desired audio mode
repeatedly
appears.
3.
The choice is
STEREO, LEFT, RIGHT and MONO.
the primary language is output on
the left channel and the secondary channel is output
In BIL
playback
from the
simultaneously
output is
right
channel when audio
set to STEREO.
The
primary language will be output from both
setting is MONO.
Please note that when adjusting the tracking
chan-
nels when the audio
control Hi-Fi stereo sound may revert to MONO.
On Screen
Display (F.OSD)
You may easily
amount of tape
display the current time or tape counter,
left, day, month, year, day of week,
programme channel, tape speed and operational mode
of your DVD+VCR on the TV screen. If a recording is
taking place these On Screen Displays will not be
recorded onto the
1.
tape.
Press CLK/CNT to
Press CLK/CNT
display options.
display.
repeatedly
The
tape
to
cycle through
the
counter and amount of
tape left will appear if there is
2.
a
tape loaded.
After 3 seconds the
Displays
will clear
majority of the On Screen
leaving only the clock or tape
counter and the amount of
Press CLK/CNT
the TV
2.
Press x when
screen.
again
to
tape left
remove
all
on
the
screen.
displays
from
playback
or
recording
is
complete.
Press m.
The
STEREO
Sound is
tape counter will display the actual play time in
hours, minutes and seconds.
tape will rewind and automatically stop when
the counter returns to 0:00:00.
Additional
Operation
Video Doctor
-
VCR part
1W Mode
(Self-Diagnosis)
This feature informs you that there is a problem with your
DVD+VCR. These error messages will appear on the TV
screen.
1.
Press i.
Mode)
save
Set 1W ON/OFF to ON to
place your DVD+VCR into
economic power save mode.
Nothing is displayed in the display window.
1
Press1or2toselect
(Power
Press i.
The main
.
Press ENTER/OK.
an
Press F
menu
or
will appear
on
the TV
screen.
G to select the 1W ON/OFF.
Press ENTER/OK.
ANTENNA CONNECT
HEAD STATUS
TAPE STATUS
2.
Press D
3
Press i.
or
E to select the ON.
NO. OF TIMER PROGRAMME
NEXT TIMER PROGRAMME
Pr-12
P
SET
R
ACMS
SYS
SET
fOSD
ON
OFF
Note:
2.
Press
3 or 4
to check
a
problem.
ANTENNA CONNECT
O PLEASE CHECK:
Connect the aerial into the
Some function may not be
?
jack securely.
TAPE STATUS
O NOT RECORDABLE:
Insert a tape with its protection tab in
place
NO. OF TIMER PROGRAMME
O2
Shows the number of timer recording.
NEXT TIMER PROGRAMME
PR-01 26 10:00~11:00SP
Shows the current status of timer
O
3.
Press i to
Lock
remove
switched off
1.
menus
recording.
from the TV
screen.
(Child Lock)
The control buttons
using
the
on
the front of the unit
that your unit
the remote control.
so
can
only
be
can
be
operated
Press LOCK.
and SAFE will appear in the display window.
None of the buttons on the front of your unit will
work.
If any buttons on the front of your unit are
SAFE will flicker in the display window for
pressed
a
few
seconds.
2.
Press LOCK
again
to switch off the child lock.
OFF will appear in the
display
window.
in the 1W Mode.
The 1W Mode is not available in the
the timer
HEAD STATUS
O PLEASE CLEAN:
Clean your video heads.
operated
recording.
standby
mode for
Operation
Additional
Recording
Operation
from External
VCR part
-
Components
With this video recorder you
an external source, such as
copying
another video recorder
camcorder.
or a
can
make
recordings
from
from
Note:
In the
The
be referred to
1.
this video recorder will be
following description,
recording and
other appliance will be
used for
one
as
will be referred to
as
used for
and will
playback
IN
You
AV1)/VIDEO (VCR
IN
AV1) on the rear
(L(MONO)/R) /
tape into VCR A and
a
3.
4.
blank VHS video
tape into the VCR deck.
place on the DVD from which you
dubbing using the N, BACKWARD,
5.
Press REC/ITR
on
unit.
from
the Remote Control.
manually
to
begin
When the DVD is finished
playing,
press STOP to
copying.
If the DVD you are attempting to copy is copy
protected, you will not be able to copy the disc.
It is not permitted to copy Macrovision encoded
DVDs (or Discs). "LOCK" is displayed in the display
window.
(L(MONO)/R)/
the front of your unit.
point
Notes:
recording from AUDIO L/R (VCR IN AV1)/
(VCR IN AV1) terminals on the rear of your
from AUDIO IN
want to
copying.
?
on
a
The DVD goes into PLAY mode and the VCR goes
into RECORD mode. If the DVD disc menu appears,
AV 1 for
recording
tape.
FORWARD and PAUSE functions.
end
VIDEO IN terminals
VHS
Find the
start
blank
Press AV until the socket you wish to record from is
AV 2 for
a
Insert
you may need to press N
displayed. (VCR B)
VIDEO
DVD to
For best results, pause playback at the
which you want to record.
tape into VCR B.
3.
a
2.
VCR A.
Insert the recorded
copy the contents of
Insert the disc you wish to copy into the DVD deck
and close the disc tray.
of your unit or AUDIO IN
VIDEO IN on the front panel of your unit.
2.
can
1.
VCR B.
VCR A should be connected to the AUDIO L/R
(VCR
panel
from DVD to VCR
Copying
?Y
ou
must
stop the copy process manually when the
ends, or the unit may replay and record
DVD movie
4.
To start
press the REC/ITR
VCR A.
recording,
and PLAY
on
on
VCR B
over
?
5.
When you want to finish
on both video recorders.
copying,
press the STOP
Notes:
?
Before recording,
position.
?
If your source is copy-protected using CopyGuard,
you will not be able to record it using this unit. See
Copyright on page 5 for more details.
?T
o
record for
Timer
a
confirm the
fixed
Recording.
length
of
recording
time,
see
start
Instant
and
over
again.
When you stop the DVD
the recording on VCR is
playback during copying,
stopped automatically.
General
Playback features
Buttons
DVD Part
-
Discs
Operations
Z
(OPEN
X
(PAUSE)
/
CLOSE)
Opens
repeatedly
or
to
playback.
Operation
play Frame-by-Frame.
press .
During playback,
ter/track
tray.
press X to pause
During playback,
Press X
./>
closes the disc
or
to return to the
or
> to go to the next
of the current
chap-
beginning
chapter/track.
Press . twice
briefly
to
step back
to the
previous
chapter/track.
m/M
During playback, press
required scan speed.
m
or
M
DVD, DivX disc; 4 steps
CD, MP3, WMA, Audio CD
Video
While the
repeatedly
; 3
playback is paused, press
(4 steps, forward only).
to select the
steps
M
repeatedly
to
play
in
slow motion
REPEAT
press REPEAT
During playback,
desired
DVD Video discs:
Video
A-B
repeatedly
to select
a
repeat mode.
Chapter/Title/Off
CD, Audio CD, DivX/MP3/WMA discs: Track/All/Off
During playback, each press of A-B button to select point A
point B and repeats a sequence from point A (Starting
point) to point B (End point). Press CLEAR to exit.
and
ZOOM
During playback or pause mode, press ZOOM to enlarge the
image (4 steps).
You can move through the zoomed picture using bBvV
video
buttons. Press CLEAR to exit.
RANDOM
TITLE
During playback
playback.
(ANGLE)
in
stop mode, press RANDOM for random
If the current DVD title has
the
DISC MENU
or
screen.
The disc
a
menu, the title
Otherwise, the disc
menu
appears
on
the
menu
menu
appears
on
may appears.
screen.
During playback of DVD disc contains scenes recorded differcamera angles, press ANGLE repeatedly to select a
desired angle.
ent
(SUBTITLE)
During playback, press SUBTITLE repeatedly
language.
to select
a
desired subtitle
(AUDIO)
During playback, press AUDIO repeatedly
language or audio track.
audio
to hear
a
different
Playing
Notes
?
a
DVD
general
on
Video CD
or
features:
Marker Search
OnaVideoCDwithPBC,youmustsetPBCtoOffon
the setup menu to use the repeat function (See "PBC"
on page 19).
If you press > once during Repeat Chapter
the repeat playback cancels.
?
(Track)
playback,
?
Zoom may not work
?
When you are playing a DVD disc contains scenes
recorded different camera angles, the angle indicator
will blink
the TV
on
different
angles
possible.
is
?
The A-B
current
on some
To enter
You
start
DVDs.
To Recall
screen
as an
Marker
a
playback from up to nine memorized
points. To enter a marker, press MARKER at the desired
point on the disc. The Marker icon appears on the TV
screen briefly. Repeat to enter up to nine markers.
can
during
scenes
indication that
1.
recorded at
angle switching
repeat function is available only in the
2.
During
disc
search
menu
a
Marked Scene
press SEARCH. The marker
appears on the screen.
playback,
Within 10
seconds, press b / B to select
number that you want to recall or clear.
Press ENTER and
3.
chapter/track.
Clear
or
scene.
playback
a
marker
starts from the marked
Or, Press CLEAR and the marker number is
erased from the list.
4.
Additional features
You
can play any marker
the marker search menu.
by inputting
its number
on
3D Surround
To
produce
3D surround effect that simulates multi-
a
channel audio from two stereo
five+
from
of the
speakers (instead
speakers normally required for multi-channel
a home theater system).
audio
Last Scene
This
player
remove
you
the
Press DISPLAY
2.
Use 3
or
option
will be
Use1or2totoselect"3DSUR".
2.
Press AUDIO
effect, select "Normal".
"3D SUR." appears
on
To return to normal
playback, press AUDIO repeatdisappears from the menu
edly
until "3D SUR."
menu screen.
screen.
Time Search
To start
playing
at any chosen time
on
the disc:
1.
Press DISPLAY
2.
Press v / V to select the time clock icon and
during playback.
"--:--:--" appears.
3.
Use numerical buttons to
input
the
required
start
time in
hours, minutes, and seconds from left to
right. If you enter the wrong numbers, press CLEAR
to
remove
the numbers you entered. Then
input
the
correct numbers.
4.
Press ENTER to confirm.
selected time.
player
Playback
scene
memorized,
does not memorize the
starts from the
player
before
scene
of
commencing
a
disc if
to
play
Screen Saver
appears when you leave the DVD
mode for about five minutes.
screen saver
player
during playback.
the
If you load a disc that has the
is automatically recalled.
you switch off the
disc.
The
1.
from the last disc that
Note:
option.
highlighted.
To turn off the 3D Surround
scene
remains in memory even if
the disc from the player or switch off the
scene
scene
This
4 to select the sound
The sound
3.
during playback.
memorizes last
is viewed. The last
player.
1.
Memory
in
Stop
the
Playing
This unit
can
Audio CD
an
Audio CDs
play
MP3/WMA file
or
MP3/WMA files record-
or
ed media.
MP3/ WMA/ Audio CD
Once you insert
Audio
MP3/WMA files recorded media
an
appears on the TV screen.
Press v / V to select a track/file then press PLAY
CD,
or
a menu
ENTER and
playback
starts. You
can use
variable
or
List
Program
1-Music1
Track3
2-Music2
Track4
3-Music3
Track5
4-Music4
3.
6-Music6
Track7
Clear All
Track8
Clear All
7-Music7
PROGRAM Edit
DISPLAY
Info
When
track
PROGRAM Edit
4.
playing
file
a
titles, you
information such
containing
can see
the information
as
by pressing
5.
DISPLAY.
[ Song, Artist, Album, Comment,
Genre
move
]
6.
to the next page.
a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word
limited
as
top of the
on
MP3 / WMA disc
?
menu
is
with this
compatibility
player
is
?
?
Sampling frequency: within 8 48 kHz (MP3), within
32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32 384 kbps (WMA)
The player cannot read an MP3/WMA file that has a
file extension other than ".mp3" / ".wma".
CD-R physical format should be ISO 9660
If you record MP3 / WMA files using software that
cannot create a file system (eg. Direct-CD) it is
impossible to playback MP3 / WMA files. We recommend that you use Easy-CD Creator, which creates
-
track
on
the
program edit mode,
"List", then press ENTER
to
Select the track you want to start
"Program" list.
Press PLAY
or
ENTER to start.
playing
on
the
in
Playback begins
To
resume
list have
played
normal
playback
track
a
on
once.
from
programmed play-
the list and then press PLAY.
Repeat Programmed Tracks
?
Track:
?
All:
?
Off(No display):
a
desired
repeat mode.
repeats the current track
repeats all the tracks on the "Program" list.
does not
play repeatedly.
If you press > once during
the repeat playback cancels.
Repeat
Track
playback,
-
an
ISO 9660 file
File
must
incorporate
?
They
should not contain
names
should have
an
a
maximum of 8 letters and
.mp3 or .wma extension.
special letters such as
1.
2.
a
The total number of files in
a
folder should be less
Track from
"Program"
During
STOP
the
mark will appear
E
List
mode, press PROGRAM and
Use vVbBto select the track that you wish to
from the Program list.
erase
3.
Press CLEAR.
tracks
1.
/ ?
*:"<>letc.
than 1190 files.
Erasing
2.
on
the
Erasing
system.
?
?
appears.
mark will appear.
E
Note:
follows:
-
?
a
Press REPEAT to select
highlighted.
-
?
Select
back, select
On
?
menu
again to exit the
will disappear.
mark
E
"Program"
Press DISC MENU to
MP3/WMA files recorded
MUSIC
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
Tips:
?
or
or
place the selected track on the "Program" list.
Repeat to place additional tracks on the list.
ID3 TAG
?
Audio CD
an
Press PROGRAM. The
then the
5-Music5
Track6
Insert
media. AUDIO CD
Press PROGRAM
Program
Track1
Track2
1.
contain 30 tracks.
can
Note:
1/12
0:00:00
List
A program
2.
MUSIC
1/12
0:52:07
The program function enables you to store your favorite
tracks from any disc in the player memory.
play-
back functions. Refer to page 27-28.
AUDIO CD
Programmed Playback
Repeat step
Complete Program
During
STOP
the
mark will appear
E
1~3to
erase
additional
the list.
List
mode, press PROGRAM and
Use vVbBto select "Clear
All", then press
ENTER.
Note:
The programs are also cleared when the power is off
the disc is removed.
or
29
Operation
Viewing
This unit
1.
can
JPEG file
a
JPEG files recorded media.
play
Insert
a
menu
appears
JPEG files recorded media. The PHOTO
on
the TV
to another File
Moving
Press .
ing
screen.
PHOTO
a
or
picture
>
or cursor
(b
or
B)
to advance to the next
once
or
while view-
previous
file.
Zoom
Preview
List
During watching pictures, press ZOOM to enlarge the
image (4 steps).
You can move through the zoomed picture using bBv
Folder 00
video
Folder 01
>>>
Folder 02
Folder 03
Folder 04
V buttons.
01 FILE 01
02 FILE 02
To rotate
03 FILE 03
/FILE 01
picture
Press v / V
during showing
ture clockwise
2.
Press v / V to select
or
a
picture
to rotate the
pic-
counter clockwise.
folder, and press ENTER. A
a
list of files in the folder appears.
3.
If you want to view a particular file, press
v / V to highlight a file and press ENTER
JPEG disc
or
PLAY.
as
?
4.
To return to the PHOTO
menu
while
watching pic-
are
in
Folder
ous
file list and want to return to the
a
list,
use
Depending
v / V buttons to
be too
previ-
upon the size and number of JPEG
a long time for this unit to read
highlight
Press DISC MENU to
move
large
---
reduce the resolution of the JPEG
files to less than 5 million
and
pixels
and burn another
disc.
press ENTER.
?
is limited
player
the disc's contents. If you do not see an on-screen
display after several minutes, some of the files may
Tips:
If you
with this
files, it could take
tures, press STOP.
?
compatibility
follows:
?
to the next page.
The total number of files in
a
folder should be less
than 1190 files.
?
There
>>
?
are
three Slide
(Normal)
and
Speed options
(Slow).
Use vVbBto
highlight
select the
you want to
option
.
Then,
use
: >>>
use
(Fast),
b / B to
then press ENTER.
a disc with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
While
help
top of the
on
watching
a
picture,
menu
is
menu.
highlight
the
(Slide Show)
then
Still Picture
Press PAUSE/STEP
The
player
will
now
PAUSE/STEP
during
slide show.
go into PAUSE mode.
To return to the slide
30
Some discs may be incompatible due to
recording format or the condition of disc.
?
If the files have
rename
?
again.
show, press PLAY
or
press
a
different
Ensure that all the selected files have the
extensions when
File
them
names
to be read
shown
Use vVbBto
press ENTER.
2.
?
highlighted.
press RETURN to hide the
Slide Show
1.
?
On
PHOTO word
?
>
as
copying
".jpg"
layout.
".jpe" or ".jpeg" extensions, please
".jpg" file.
as
without
by
into the CD
".jpg"
extension will not be able
this unit. Even
JPEG
image
though
the files
files in Windows
are
Explorer.
Playing
Using
1.
this DVD
Insert
DivX Movie file
a
Player
you
can
play
DivX file.
DivX disc
DivX file recorded media. The MOVIE
a
appears
the TV
on
menu
compatibility
as
follows:
?A
v ailable
with this
player
is limited
screen.
MOVIE
720x576
0:00:00
resolution size of the DivX file is under
(W
x
H) pixel.
List
?
Movie Folder 1
The file
name
of the DivX subtitle is available
Movie Folder 2
by
56 characters.
Movie Folder 3
Movie Folder 4
Movie Folder 5
?
Movie Folder 6
If there is
Movie Folder 7
impossible
code to express in the DivX
as
mark on the
file, it may be displayed
Movie Folder 8
"
"
_
display.
2.
Press v / V to select
a
folder, and press ENTER. A
?
list of files in the folder appears.
3.
If you want to view a particular file, press v / V to
highlight a file and press ENTER or PLAY.
You
variable
can use
playback
is not
Press STOP to
stop the playback. The Movie
menu
If you are in a file list and want to return to the previFolder list, use the v / V buttons on the remote to
On
?
?
DivX
CD with
menu
is
highlighted.
picture may not displayed properly while DivX
playback. Set your TV system to AUTO or PAL-60
mode to restore the picture, if available.
The disc subtitle may not be displayed properly, if
DivX subtitle is downloaded through the internet.
If the Disc Subtitle
DivX subtitle
title may not
setup
menu
a
does not have the
language you are going
be displayed properly.
to
play,
Playable
the sub-
called
1-point, 2-point,
or
encoding,
3-point GMC.
DivX file
.avi, .mpg, .mpeg
Playable
The
different levels of GMC
are
usually
encoders, like
Xvid, have this option.
or
There
to the next page.
switch
of the
?
move
MP3/WMA, JPEG and MOVIE file, you
MUSIC, PHOTO and MOVIE menu. Press
TITLE and MUSIC, PHOTO and MOVIE word on top
a
audio is out-
GMC?
MPEG4 standard. Some MPEG4
and press ENTER.
Press DISC MENU to
can
or
GMC is the acronym for Global Motion
Compensation. It is an encoding tool specified in
ous
?
interleaved, either video
If the file is recorded with GMC, the unit supports only 1-point of the record level.
*
highlight
30
putted.
?
Tips:
?
over
?I f the video and audio structure of recorded file
functions. Refer to
appears
?
frame is
screen
normally.
page 27-28.
4.
If the number of the
per 1 second, this unit may not operate
Subtitle format
SubRip(*.srt/*.txt)
SAMI(*.smi)
SubStation Alpha(*.ssa/*.txt)
MicroDVD(*.sub/*.txt)
SubViewer 1.0(*.sub)
SubViewer 2.0(*.sub/*.txt)
TMPlayer(*.txt)
Playable
Codec format
"DIVX3.xx
Notice for
displaying
If the subtitle does not
the DivX subtitle
display properly during playback,
press and hold SUBTITLE about 3 seconds then press
b / B to select another language code until the subtitle
is displayed properly.
"MP43
", "DIVX4.xx ", "DIVX5.xx ", "XVID ",
", "3IVX ".
Playable
Audio format
"Dolby Digital ", "DTS ", "PCM ", "MP3 ", "WMA ".
Sampling frequency: within 8 48 kHz (MP3),
within 32 48kHz (WMA)
Bit rate: within 8 320kbps (MP3),
32
192kbps (WMA)
Not all the WMA Audio format is compatible with
?
-
-
?
-
-
?
this unit.
31
Operation
Playing
This unit will
DVD VR format Disc
a
play
DVD-R/RW discs recorded
DVD-Video format that have been finalized
using
using a
the
DVD-recorder.
?
This unit will
Video
Insert
1.
play DVD-RW discs
Recording (VR) format.
a
disc and close the
recorded
tray, It
start
the
using
playing
automatically.
The DVD-VR menu appears on the TV screen when
you press DISC MENU buttons while playing.
2.
DVD-VR
Press v / V to select
3.
ENTER and
a
playback
Press DISC MENU to
4.
track then press PLAY
or
starts.
move
to the list
menu.
Note:
?
Unfinalized DVD-R/RW discs cannot be
played
in this
player.
?
Some DVD-VR disc
DVD RECORDER.
are
made with CPRM data
Player
does not
by
support these
kinds of discs.
What is 'CPRM'?
CPRM is a copy protection system (with scramble
system) only allowing the recording of 'copy once'
broadcast programs. CPRM stands for Content
Protection for Recordable Media. This player is CPRM
which means that you can record copybroadcast programs, but you cannot then make
copy of those recordings. CPRM recordings can
compatible,
once
a
only
be made
on
DVD-RW discs formatted in VR
mode, and CPRM recordings
players
that
are
only be played on
specifically compatible with CPRM.
can
Additional
Controlling
Operation
other TVs with the
Maintenance and Service
remote control
Refer to the information in this
You
control the sound
can
You
control the sound
can
source, and
supplied remote
level, input
power switch of your LG TV with the
control.
level, input
source, and
power switch of non-LG TVs as well.
If your TV is listed in the table below, set the
appropri-
ate manufacturer code.
1.
While
holding down TV POWER button, press the
number buttons to select the manufacturer code for
your TV
the table
(see
below).
contacting
When
save
at the
more
them
than
one
at
code number is
one
a
one
carton and
Operation
packing
the exterior surfaces clean
Keeping
?
listed, try entering
time until you find the
original shipping
factory.
Do not
near
If
the
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally packed
Release TV POWER button.
Code numbers of controllable TVs
before
the unit
shipping
Please
chapter
service technician.
the Unit
Handling
?
2.
a
that works with
use
volatile
liquids
such
as
insecticide spray
the unit.
Do not leave rubber
or plastic products in contact
long period of time. since they
with the unit for
a
leave marks
the surface.
on
your TV.
Cleaning
Manufacturer
Code Number
LG / GoldStar
1
(Default),
the unit
To clean the
player, use a soft, dry cloth. If the surfaces
extremely dirty, use a soft cloth lightly moistened
with a mild detergent solution.
2
are
Zenith
1,3,4
Samsung
6,7
Sony
8,9
Do not
use
Hitachi
4
thinner,
as
Note:
?
strong solvents such
these
Maintaining
on
function
the
your TV,
Depending
on
TV,
all buttons may not
after entering the correct
might damage
the Unit
even
The DVD+VCR is
a
high-tech, precision
lens and disc drive
optical pick-up
picture quality
worn, the
If you enter a new code number, the code number
entered will be erased.
previously
?
When you replace the batteries of the remote, the
code number you have set may be reset to the default
setting.
Set the
alcohol, benzine,
some or
manufacturer code.
?
as
appropriate
code number
again.
parts
device. If the
are
dirty
or
could be diminished.
Depending on the operating environment, regular
inspection and maintenance are recommended after
every 1,000 hours of
For
details, please
service center.
or
the surface of the unit.
use.
contact your nearest authorized
Language
and Area Code List
Language Code
Use this list to
input
List
your desired
language
for the
following
initial
settings:
Disc
Audio, Disc Subtitle, Disc Menu.
Language
Code
7678
Language
Singhalese
Code
7074
Language
Lingala
Code
6566
Language
Fiji
Code
Abkhazian
Afar
6565
Finnish
7073
Lithuanian
7684
Slovak
8375
Afrikaans
6570
French
7082
Macedonian
7775
Slovenian
8376
Albanian
8381
Frisian
7089
7771
Somali
8379
Ameharic
6577
Galician
7176
7783
Spanish
6983
Arabic
6582
Georgian
7565
Malagasy
Malay
Malayalam
7776
Sudanese
8385
Armenian
7289
German
6869
Maltese
7784
Swahili
8387
Assamese
6583
Greek
6976
Maori
7773
Swedish
8386
Aymara
Azerbaijani
6588
Greenlandic
7576
Marathi
7782
8476
6590
Guarani
7178
Moldavian
7779
Tagalog
Tajik
Bashkir
6665
Gujarati
7185
Mongolian
7778
Ta mil
8465
Basque
Bengali; Bangla
6985
Hausa
7265
Nauru
7865
Tatar
8484
6678
Hebrew
7387
7869
Telugu
8469
Bhutani
6890
Hindi
7273
7879
Thai
8472
Bihari
6672
Hungarian
7285
7982
Tibetan
6679
Breton
6682
Icelandic
7383
Nepali
Norwegian
Oriya
Panjabi
8065
8473
Bulgarian
6671
Indonesian
7378
Pashto, Pushto
8083
Tigrinya
Tonga
Burmese
7789
Interlingua
7365
Persian
7065
Tu r kish
8482
Byelorussian
6669
Irish
7165
Polish
8076
Tu rkmen
8475
Cambodian
7577
Italian
7384
Por tuguese
8084
Twi
8487
Catalan
6765
Japanese
7465
Quechua
8185
Ukrainian
8575
Chinese
9072
Javanese
7487
Rhaeto-Romance
8277
Urdu
8582
Corsican
6779
Kannada
7578
Rumanian
8279
Uzbek
8590
Croatian
7282
Kashmiri
7583
Russian
8285
Vietnamese
8673
Czech
6783
Kazakh
7575
Samoan
8377
Volapuk
8679
Danish
6865
Kirghiz
7589
Sanskrit
8365
Welsh
6789
Dutch
7876
Korean
7579
Scots Gaelic
7168
Wolof
8779
English
Esperanto
6978
Kurdish
7585
Serbian
8382
Xhosa
8872
6979
Laothian
7679
Serbo-Croatian
8372
Yiddish
7473
Estonian
6984
Latin
7665
Shona
8378
Yoruba
8979
Faroese
7079
Latvian, Lettish
7686
Sindhi
8368
Zulu
9085
8373
8471
8479
Area Code List
Choose
a area
Area
code from this list.
Code
AF
Area
Code
Area
Code
Area
Code
ET
Malaysia
MY
Saudi Arabia
SA
FJ
Maldives
MV
SN
Finland
FI
Mexico
MX
France
FR
Monaco
MC
Senegal
Singapore
Slovak Republic
BE
Germany
DE
Mongolia
MN
Slovenia
SI
Bhutan
BT
Great Britain
GB
Morocco
MA
South Africa
ZA
Bolivia
BO
Greece
GR
Nepal
NP
South Korea
KR
Brazil
BR
Greenland
GL
Netherlands
NL
Spain
ES
Cambodia
KH
Islands
HM
Netherlands Antilles
AN
Sri Lanka
LK
Canada
CA
HK
New Zealand
NZ
Sweden
SE
HU
Afghanistan
Argentina
AR
Ethiopia
Fiji
Australia
AU
Austria
AT
Belgium
SG
SK
Chile
CL
Hong Kong
Hungary
Switzerland
CH
CN
India
IN
Nigeria
Norway
NG
China
NO
Taiwan
TW
Colombia
CO
Indonesia
ID
Oman
OM
Thailand
TH
Congo
CG
Israel
IL
Pakistan
PK
TR
Costa Rica
CR
Italy
IT
Panama
PA
Turkey
Uganda
Croatia
HR
Jamaica
JM
PY
Ukraine
UA
CZ
JP
Paraguay
Philippines
PH
United States
US
KE
Poland
PL
Uruguay
UY
KW
Po r tugal
PT
Uzbekistan
UZ
LY
Romania
RO
Vietnam
VN
LU
Russian Federation
RU
Zimbabwe
ZW
Czech
Republic
Denmark
DK
Japan
Kenya
Ecuador
EC
Kuwait
Egypt
EG
El Salvador
SV
Libya
Luxembourg
UG
Troubleshooting
Check the
following guide
for the
possible
cause
of
a
before
problem
service.
contacting
Cause
Symptom
Correction
No power.
The power cord is disconnected.
Plug the power
securely.
The power is on, but
the DVD player does
No disc is inserted.
Insert
The TV is not set to receive this unit's
Select the
signal output.
on
a
cord into the wall outlet
disc.
not work.
No
picture.
the TV
appropriate video input mode
the picture from the this
so
unit appears
No sound.
Connect the video cable into the
securely.
The Progressive Scan is set to "On" on
the setup menu but is connected to a
standard (analog) television.
Set
The
Select the correct
equipment
connected with the
The audio cables
are
not connected
The DVD
not start
poor.
player does
playback.
(see
Progressive
page 17).
audio receiver
The power of the equipment connected
with the audio cable is turned off.
Tu rn
The Audio
Set the Audio
is set to the wrong
The disc is
An
unplayable
The disc is
input
mode of the
so
on
the
equipment
jacks
connected with
the audio cable.
option to the correct
position, then turn on the DVD player
again by pressing POWER.
Clean the disc.
dirty.
The TV channels
Scan to "Off"
Connect the audio cable into the
securely.
option
jacks
you can listen to the
sound from the this unit.
securely.
position.
is
screen.
securely.
signal output.
picture
the TV
The video cable is not connected
audio cable is not set to receive DVD
The
on
are
not tuned in
properly.
disc is inserted.
placed upside
Check
Insert
tuning,
carry out
tuning again.
playable disc. (Check
type and Regional code.)
down.
a
Place the disc with the
the disc
playback
side
down.
The disc is not
within the
placed
guide.
Place the disc
inside the
The disc is
dirty.
The
level is set.
Rating
Cancel the
The remote control
There is
does not work
remote control and this unit.
an
the disc
tray correctly
Clean the disc.
the
properly.
on
guide.
obstacle in the
path
of the
The batteries in the remote control
are
rating
Rating
function
or
change
level.
Remove the obstacle.
Replace
the batteries with
new ones.
exhausted.
Video
tape
cannot be
Is the cassette
compartment empty?
Eject
the
tape in.
inserted.
No Hi-Fi sound
Audio mode is not set
properly.
Select "STEREO"
"AUDIO"
on
by repeatedly pressing
the remote control.
Refrnce
Specification
General
Power
requirements
AC
Power
consumption
17W
Dimensions
Mass
(approx.)
110-240V, 50/60 Hz
430x78.5x265mm(WxHxD)
4.2
(approx.)
kg
Operating temperature
5˚C to 35˚C
Operating humidity
5%to90%
Timer
24 hours
display type
RF Modulator
UHF 22
68
-
(41˚F
to
95˚F)
(Adjustable)
System
Laser
Semiconductor
Video Head
laser, wavelength
Double azimuth 6
system
650
Signal system
PAL
Frequency
DVD(PCM96kHz):8Hzto44kHz
DVD(PCM48kHz):8Hzto22kHz
response
nm
heads, helical scanning.
CD:8Hzto20kHz
ratio
Signal-to-noise
More than 100dB
(ANALOG
Harmonic distortion
Less than 0.008%
Dynamic
More than 100 dB
range
More than 95 dB
OUT connectors
only)
(DVD)
(CD)
Inputs (VCR)
Audio
-6.0dBm,
more
Video
1.0
75
Vp-p,
than 47 kohms
ohms, unbalanced
Outputs (DVD)
VIDEO OUT
1
Vp-p 75 ohms, sync negative
(Y) 1.0 Vp-p 75 ohms, negative
(C) 0.3 Vp-p 75 ohms
S-VIDEO OUT
COMPONENT VIDEO OUT
(Y) 1.0 V (p-p), 75 Ω, negative sync, RCA jack
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
(Progressive Scan)
Audio
Audio
sync., Mini Din
output (coaxial audio)
0.5V(p-p),75Ω,RCAjackx1
output (analog audio)
2.0 Vrms
(1 KHz,
0
dB),
600 Ω, RCA
4-pin
x
x
1
1
jack (L, R)x2
Outputs (VCR)
Audio
-6.0dBm, less than
Video
Design
1.0Vp-p,
and
specifications
are
subject
to
change
75
ohms,
1 kohms
unbalanced
without notice.
P/NO: 3834RV0044Y
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement