ENGLISH
OWNER’S MANUAL
Micro Hi-Fi System
Please read this manual carefully before operating
your set and retain it for future reference.
CM2630 (CM2630, CMS2630F)
CM2630-FR_DSGPLLK_ENG_4251.indd 1
2013-03-09
4:00:04
1
Getting Started
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CM2630-FR_DSGPLLK_ENG_4251.indd 2
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
2013-03-09
4:00:04
Getting Started
3
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
1
Getting Started
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
CM2630-FR_DSGPLLK_ENG_4251.indd 3
2013-03-09
4:00:04
4
Getting Started
LG Bluetooth Remote
1
You can control this player with your iPhone or
Android phone via Bluetooth. This player and your
phone must be connected to Bluetooth. Visit
Getting Started
“ Apple App Store” or “Google Android Market
(Google Play Store)” . And use this QR code to
search for “LG Bluetooth Remote” app. For detailed
information, refer to the 23 page.
CM2630-FR_DSGPLLK_ENG_4251.indd 4
2013-03-09
4:00:04
Table of Contents
Table of Contents
1
Getting Started
2
Safety Information
6
Unique Features
6Accessories
7
Playable file Requirement
8
Remote Control
9
Front Panel
10 Rear Panel
2Connecting
11
11
11
12
12
12
13
Connecting to speakers
– Attaching the speakers to the unit
Antenna Connection
Optional Equipment Connection
– USB Connection
– PORT. IN Connection
– PHONES Connection
5
3Operating
14
14
14
15
15
15
16
16
16
16
16
16
16
17
17
17
17
18
18
19
19
19
19
19
21
21
Basic Operations
– CD/USB Operations
– Selecting a folder and an MP3/WMA
Other Operation
– Programmed Playback
– Deleting an MP3/WMA file
– Displaying file information
– Turn off the sound temporarily
– DEMO
– Auto Power Down
Radio Operations
Listening to the radio
– Improving poor FM reception
– Presetting the Radio Stations
– Deleting all the saved stations
Sound adjustment
– Setting the sound mode
Setting the Clock
– Using your player as an alarm clock
– Sleep Timer Setting
– Dimmer
Advanced Operation
– Recording on USB
– To select recording bit rate and speed
Using a Bluetooth wireless technology
– Listening to music of a Bluetooth
device
23 Using LG Bluetooth Remote app
1
2
3
4
5
4Troubleshooting
25Troubleshooting
5Appendix
26 Trademarks and Licenses
27Specifications
28Maintenance
28 – Notes on Discs
28 – Handling the Unit
CM2630-FR_DSGPLLK_ENG_4251.indd 5
2013-03-09
4:00:04
6
Getting Started
Unique Features
1
USB Direct Recording
Accessories
Please check and identify the supplied accessories.
Getting Started
Records music to your USB device.
Portable In
Listens to music from your portable device. (MP3,
Notebook, etc)
Remote Control (1)
Battery (2)
Timer
Sets alarm which go off at desired time.
Bluetooth®
Listens to music stored on your Bluetooth device.
FM Antenna (1)
Time Sync
Sets your unit’s clock automatically by using your
Bluetooth device. (LG Bluetooth Remote app)
CM2630-FR_DSGPLLK_ENG_4251.indd 6
2013-03-09
4:00:05
Getting Started
Playable file
Requirement
Compatible USB Devices
yy MP3 Player : Flash type MP3 player.
SB Flash Drive :
yy U
Devices that support USB2.0 or USB1.1.
MP3/ WMA file compatibility with this unit is limited
as follows :
USB device requirement
it rate : within 8 to 320 kbps (MP3),
yy B
40 to 192 kbps (WMA)
yy Maximum files : Under 999
evices which require additional program
yy D
installation when you have connected it to a
computer, are not supported.
1
Getting Started
MP3/ WMA music file requirement
yy T he USB function of this unit does not support
all USB devices.
yy S ampling frequency : within 8 to 48 kHz (MP3),
within 8 to 48 kHz (WMA)
7
yy Do not extract the USB device while in operation.
yy File extensions : “.mp3”/ “.wma”
yy F or a large capacity USB, it may take longer than
a few minutes to be searched.
yy CD-ROM file format : ISO9660/ JOLIET
yy To prevent data loss, back up all data.
yy You have to set the disc format option to
[Mastered] in order to make the discs compatible
with the LG players when formatting rewritable
discs. When setting the option to Live File
System, you cannot use it on LG players.
(Mastered/ Live File System : Disc format system
for Windows Vista)
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
sing NTFS file system is not supported. (Only
yy U
FAT(16/ 32) file system is supported.)
yy T his unit is not supported when the total
number of files is 1 000 or more.
yy E xternal HDD, Card readers, Locked devices, or
hard type USB devices, mobile phone are not
supported.
SB port of the unit cannot be connected to PC.
yy U
The unit cannot be used as a storage device.
yy Some USB may not work with this unit.
CM2630-FR_DSGPLLK_ENG_4251.indd 7
2013-03-09
4:00:05
8
Getting Started
Remote Control
• • • • • • a • • • • • •
1
Getting Started
1 (Power): Switches the unit
ON or OFF.
B (Open/Close) : Ejects the disc
from slot loader.
PRESET.FOLDER W/S :
-- Searches for a folder of MP3/
WMA files. When a CD/USB
containing MP3/WMA files in
several folders is being played,
press PRESET.FOLDER W/S
to select the folder you want
to play.
USB REC
DELETE
DELETE : Deletes MP3/WMA
files. (USB only)
FUNCTION : Selects the
function and input source.
• • • • • • c • • • • • •
VOL +/- : Adjusts speaker
volume.
• • • • • • b • • • • • •
PROGRAM/MEMORY :
- Stores radio stations.
- Creates a playlist you want to
listen to.
SOUND EFFECT : Chooses
sound impressions.
Battery Installation
USB REC : Starts recording
-- Chooses a preset number for
a radio station.
MUTE @ : Mutes the sound.
TIMER
ZENTER :
- Stops playback or recording.
- Cancels DELETE function.
- Confirms the clock and the
alarm setting
d/M (Play/Pause) :
- Starts or pauses playback.
- Starts or pauses playback.
SLEEP : Sets the system to turn
off automatically at a specified
time.(Dimmer : The display
window will be darkened by
half.)
INFO : Sees information about
your music. MP3 files often
come with ID3 tags. The tag
gives the Title, Artist, Album or
Time information.
0 to 9 numerical buttons :
Selects numbered tracks, files, or
preset number.
CLOCK : Sets a clock and checks
a time.
TIMER : Uses your player as an
alarm clock.
• • • • • • d • • • • • •
SET :
Confirms the clock and the
alarm setting
REPEAT (MENU) : Listens to
your tracks/files repeatedly or
randomly.
Remove the battery cover
on the rear of the Remote
Control, and insert two (size
AAA) batteries with 4 and 5
matched correctly
CM2630-FR_DSGPLLK_ENG_4251.indd 8
C/V (Skip/Search) :
-Skips Fast backward or Forward.
-Searches for a section within a
track/file.
TUNING -/+ :
Selects the radio stations.
2013-03-09
4:00:06
Getting Started
9
Front Panel
1
Getting Started
a1/!(Power)
Switches the unit ON or OFF.
bDisplay Window
c B(Insert/Eject)
Inserts or ejects a disc.
d T(Play/Pause)
- Starts and pauses playback.
- Selects STEREO/MONO.
FUNC.
Selects the function and input source.
e Y/U (Skip/Search)
- Searches backward or forward.
- Skips to the previous/next track/file.
VOL.+/Adjusts volume level.
f I(Stop)
- Stops playback or recording.
- Cancels DELETE function.
g Disc slot
Loads a disc.
CM2630-FR_DSGPLLK_ENG_4251.indd 9
yy Use top buttons after open the cover.
hPORT.IN
Listens to music from your portable device.
PHONES
Listens to music with your headphone.
(3.5 mm)
USB Port
Plays and records the audio files by
connecting the USB device.
EQ
Chooses sound impressions.
SET/DEMO
- Confirms the setting.
- Demonstrates each of functions.
TIMER
Uses your player as an alarm clock.
CLOCK
Sets the clock and checks the time.
SLEEP
Sets the system to turn off automatically at
a specified time.
(Dimmer : The display window will be
darkened by half.)
2013-03-09
4:00:06
10
Getting Started
Rear Panel
1
Getting Started
aANTENNA FM
Connects the FM wired antenna.
b SPEAKERS terminal (R/L)
c Cooling fan
d Power cord
>>Caution
Precautions in using the touch buttons
yy Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
yy Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
yy Touch the button that you want to work in
order to operate the function correctly.
yy Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
CM2630-FR_DSGPLLK_ENG_4251.indd 10
2013-03-09
4:00:06
2Connecting
Connecting
Connecting to
speakers
11
Antenna Connection
Connect the FM Wire antenna to ANTENNA FM
connector.
Attaching the speakers to the
unit
To connect the cable to the unit, press each plastic
finger pad to open the connection terminals on the
unit. Insert the wire and release the finger pad.
2
Connecting
Connect the black wire to the terminals marked (minus) and the other end to the terminals marked
+ (plus).
,,Note
Be sure to fully extend the FM wire antenna.
>>Caution
The speakers contain magnet parts, so color
irregularity may occur on the TV screen or PC
monitor screen. Please use the speakers far
away from either TV screen or PC monitor.
Color
Position
Red
Front right
White
Front left
CM2630-FR_DSGPLLK_ENG_4251.indd 11
2013-03-09
4:00:07
12
Connecting
Optional Equipment
Connection
PORT. IN Connection
The unit can be used to play the music from many
types of external device. (Portable cable is not
supplied as an accessory with this unit.)
USB Connection
2
Connect the USB port of USB Memory (or MP3
player, etc.) to the USB port on the unit.
Connecting
,,Note
Removing the USB Device from the unit
1. Choose a different function/mode or
press ZENTER or I twice in a row.
2. Remove the USB device from the unit.
CM2630-FR_DSGPLLK_ENG_4251.indd 12
1. Connect the external device to the PORT. IN
connector of the unit.
2. Turn the power on by pressing 1 or 1/!.
3. Select the PORTABLE function by pressing
FUNCTION or FUNC.
4. Turn the external device on and start playing it.
2013-03-09
4:00:07
Connecting
13
PHONES Connection
Connect a pair of stereo headphones ( 3.5 mm
phone plug) to PHONES jack on the unit for private
listening.(Headphones are not supplied as an
accessory with this unit.)
2
Connecting
,,Note
You can’t hear any sound from speakers,
while the headphones plug is inserted in the
PHONES jack.
CM2630-FR_DSGPLLK_ENG_4251.indd 13
2013-03-09
4:00:07
3Operating
14
Operating
Basic Operations
CD/USB Operations
1. Insert a disc by pressing B or connect the USB
device to the USB port.
3
2. Select the CD or USB function by pressing
FUNCTION on the remote control or FUNC. on
the unit.
Operating
3. Select a track/file you want to play by pressing
C/V on the remote control or Y/U
on the unit.
To
Stop
Playback
Pause
Skipping to
the next/
previous
track/ file
Searching
for a section
within a track/
file
Searching
for a section
within a folder
Selecting a folder and an
MP3/WMA
1. PRESET.FOLDER W/S on the remote control
repeatedly until a desired folder appears.
2. Press d/M to play it. The first file of folder will
be played. (During playback, if you selecting a
folder you want, this step is not necessary.)
,,Note
yy USB Folders/Files are recognized as below
ROOT
FOLDER
FOLDER 1
Do this
Press ZENTER or I.
Press d/M or T.
During playback, Press d/M or
T.
During playback, press V or U
to go to the next track/file.
Playing less than 2 seconds, press
C or Y to go to the previous
track/file.
FOLDER3
Press PRESET.FOLDER W/S on
the remote control.
Press REPEAT(MENU) on the
remote control repeatedly, the
Playing
display window will be changed in
repeatedly or
the following order,
randomly
RPT1 -> RPT DIR (only MP3/ WMA)
-> RPT ALL -> RANDOM -> OFF
FILE 5
FILE 6
FILE 7
FOLDER4
FOLDER7
FILE 8
FOLDER8
FILE 10
FILE 9
FILE 3
FILE 4
FOLDER 2
Playing after 3 seconds, press C
or Y to go to the beginning of
the track/file.
Press and hold C/V or Y/
U during playback and release it
at the point you want to listen to.
FILE
FOLDER5
FILE 11
FILE 12
FOLDER6
FILE 13
FILE 14
FILE 1
FILE 2
yy If there is no file in a folder, the folder will
not appear
yy Folders will be presented as the following
order;
ROOT FOLDER1 FOLDER3 FOLDER7
FOLDER8 FOLDER5 FOLDER6
yy File will be played from $ file No.1 to $ file
No.14 one by on.
yy Files and folders will be presented in order
recorded and may be presented differently
according to the record circumstances.
yy *ROOT : the first screen you can see when a
computer recognize the USB is “ROOT”.
yy The DTS is not supported. In case of DTS
audio format, audio is not output.
CM2630-FR_DSGPLLK_ENG_4251.indd 14
2013-03-09
4:00:08
Operating
Other Operation
15
Deleting an MP3/WMA file
Programmed Playback
You can delete file, folder or format by pressing
DELETE on the remote control. This function is
supported only in stop state. (USB only)
The program function enables you to store your
favourite tracks/files from any disc or USB device.
1. -Select the file you want to delete by using
C/V or Y/U . And press DELETE.
A program can contain 20 tracks/files.
-Select the folder you want to delete by
pressing PRESET.FOLDER W/Son the remote
control. Then press DELETE.
1. Insert a CD or connect USB and wait for it to be
loaded.
-Press and hold DELETE to format the USB
device.
Or
3.Press C/V or Y/U to select a next
track/file.
Press DELETE repeatedly while searching a file.
4.Press PROGRAM/MEMORY again to save and
select a next track/file.
The display window will be changed in the
following order.
5.Press d/M or T to play the programmed
music tracks/files.
6. To clear your selection, press and hold
ZENTER or I.
,,Note
The programs are also cleared when the disc
or USB device is removed, the unit is powered
off or the function is switched to others.
3
Operating
2.Press PROGRAM/MEMORY on the remote
control in stop state.
- DEL FILE? : Deletes file
- DEL FOLDER : Deletes folder
- FORMAT? : Formats USB
2. To delete file/folder or format, press d/M or
T.
3. If you want to exit the current mode, press
ZENTER or I.
>>Caution
o not extract the USB device during
yy D
operation. (play, delete, etc.)
egular back up is recommended to
yy R
prevent data loss.
yy T he delete function may not be supported
according to the USB state. (lock, etc.)
CM2630-FR_DSGPLLK_ENG_4251.indd 15
2013-03-09
4:00:08
16
Operating
Displaying file information
While playing an MP3 file containing file
information, you can display the information by
pressing INFO on the remote control.
Turn off the sound temporarily
3
Press MUTE@ on the remote control to mute
your sound.
Operating
You can mute the sound in order, for example, to
answer the telephone. the mute symbol “ ” will
appear in the display window. To cancel mute
function, press MUTE@ again or adjust volume
level by pressing VOL+/-.
DEMO
In power off state, press SET/DEMO on the unit
once. The unit will power on and display the each
of functions in the display window. To cancel DEMO
function, press SET/DEMO again.
Radio Operations
Listening to the radio
1.Press FUNCTION or FUNC. until FM appears in
the display window.
The last received station is tuned in.
2. Auto tuning : Press and hold TUNING-/+ on
the remote control for about 2 seconds until
the frequency indication starts changing, then
release. Scanning stops when the unit tunes in
a station.
Manual tuning : Press TUNING-/+ repeatedly.
3. Adjust the volume by pressing VOL+/-.
Improving poor FM reception
Press d/M orT. This will change the tuner from
stereo to mono. Then the reception will be better
than before.
Auto Power Down
This unit will be off itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
CM2630-FR_DSGPLLK_ENG_4251.indd 16
2013-03-09
4:00:08
Operating
Presetting the Radio Stations
You can preset 50 stations for FM. Before tuning,
make sure to turn down the volume.
1.Press FUNCTION or FUNC. until FM appears in
the display window.
2. Select the desired frequency by pressing
TUNING-/+.
4.Press PRESET.FOLDER W/S on the remote
control to select the preset number you want.
5.Press PROGRAM/MEMORY. The station is
stored.
Sound adjustment
Setting the sound mode
This system has a number of pre-set sound fields.
You can select a desired sound mode by using
SOUND EFFECT or EQ.
The displayed items for the Equalizer may be
different depending on sound sources and effects.
On Display
Description
NATURAL
You can enjoy comfortable and
natural sound.
AUTO EQ
Sets the sound equalizer on the
mode that is the most similar to
the genre which is included in
the MP3 ID3 tag of song files.
POP
CLASSIC
JAZZ
ROCK
This program lends an
enthusiastic atmosphere to the
sound, giving you the feeling
you are at an actual rock, pop,
jazz or classic concert.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESET.FOLDER W/S.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY on the
remote control for two seconds. “ERASE ALL” will
blink on the display window.
2.Press PROGRAM/MEMORY to erase all saved
radio stations.
MP3 -- OPT
BASS BLAST
(BASS)
LOUDNESS
BYPASS
3
Operating
3.Press PROGRAM/MEMORY on the remote
control. A preset number will blink in the display
window.
17
This function is optimized
for compressible MP3 file. It
improves the treble sound.
Reinforces the treble, bass and
surround sound effect.
Improves the bass and treble
sound.
You can enjoy the sound
without equalizer effect.
,,Note
Maybe you need to reset the sound mode,
after switching the input, sometimes even
after the sound track/file is changed.
CM2630-FR_DSGPLLK_ENG_4251.indd 17
2013-03-09
4:00:08
18
3
Operating
Setting the Clock
Using your player as an alarm
clock
You have two ways to set the clock.
1. Turn the unit on.
yy Setting the clock by connecting the BT.App.
2. Press and hold TIMER on the remote conrol to
set the alarm function.
Set time you desired on Bluetooth device and
connect the Bluetooth device to your unit via BT
app. Then the clock setting in the display window
will be synchronized with the Bluetooth device
automatically.
Operating
yy Setting the clock by pressing the buttons.
1. Turn the unit on.
2. Press and hold CLOCK.
3. Choose time mode by pressing C/V.
- 12:00 (for an AM and PM display) or 0:00 (for a
24 hour display)
4.Press SET or SET/DEMO to confirm your
selection.
5. Select the hours by pressing C/V.
3. Alarm sound sources will blink. While each of
sound sources blink, select the one you want by
pressing SET or SET/DEMO.
4. “ON TIME” will blink. This is your desired time to
turns unit on. Press C/V to change the
hours and minutes and press SET or SET/DEMO
to save.
5. “OFF TIME” will blink. This is your desired time
to turn unit off. Press C/V to change the
hours and minutes and press SET or SET/DEMO
to save.
6. The volume setting will blink. Press C/V
to change the volume and press SET or SET/
DEMO to save.
6.Press SET or SET/DEMO.
7.Press TIMER to check the alarm information.
7. Select the minutes by pressing C/V.
8. If you want to reset the clock, press and hold
TIMER.Then repeat step 3-6.
8.Press SET or SET/DEMO.
9. If you want to reset the clock, press and hold
CLOCK.Then repeat steps 3-8.
,,Note
yy If you unplug the cord from an outlet, the
clock setting you set won’t be stored.
yy If you synchronize the unit with your BT
device for clock by using BT app, you can
set 12 - Hour Time (ex - PM 11 : 00) or 24 Hour Time (ex - 23 : 00).(Android O/S only)
yy If you set the clock, you can check the time
by pressing CLOCK although the unit is
turned off.
yy If you set the clock and alarm, you can
check setting informaiton by pressing
TIMER although the unit is turned off. Then
this function will work in everyday.
yy Alarm function only works when the unit is
turned off.
yy When the alarm rings, you can deactivate
the alarm by pressing TIMER.
CM2630-FR_DSGPLLK_ENG_4251.indd 18
2013-03-09
4:00:08
Operating
Sleep Timer Setting
Press SLEEP repeatedly to select delay time
between 10 and 180 minutes. After delay time, the
unit will turn off. (You can see the following order,
180 -> 150 ->120 -> 90 -> 80 -> 70 -> 60 -> 50 ->
40 -> 30 -> 20 -> 10)
To cancel the sleep function, press SLEEP
repeatedly until the display window get bright.
,,Note
yy Sleep function will work after dimmer
function.
Advanced Operation
Recording on USB
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION or
FUNC.
One track/file recording - You can record a track/
a file on USB while playing the file you want.
All tracks/files recording - You can record tracks/
files on USB in stop state.
Program list recording - After making program
list, you can record it on USB.
(Refer to the page 15)
Dimmer
3. Start the recording by pressing USB REC on the
remote control.
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
4. To stop recording, press ZENTER.
3
Operating
yy Press SLEEP. The remaining time appears in
the display window.
19
Pausing recording
During recording, press USB REC to pause
recording. Press it again to restart recording. (Only
Radio/ Portable function)
To select recording bit rate
and speed
1.Press USB REC for longer than 3 seconds.
2.Use C/V to select the bit rate.
3.Press USB REC again to select the recording
speed.
4.Press C/V to select a desired recording
speed. (CD Function Only)
X1 SPEED
- You can listen to music while recording it.
(Audio CD Only)
X2 SPEED
- You can just record the music file.
5.Press USB REC to finish the setting.
CM2630-FR_DSGPLLK_ENG_4251.indd 19
2013-03-09
4:00:08
20 Operating
,,Note
yy You can check the recording percentage
rate for the USB record on the display
window during the recording. (MP3/ WMA
CD Only)
yy During recording MP3/ WMA, there is no
sound.
3
yy When you stop recording during playback,
the file that has been recorded at that time
will be stored. (Except MP3/WMA files)
Operating
yy Do not remove the USB device or turn
off the unit during USB recording. If not,
an incomplete file may be made and not
deleted on PC.
yy If USB recording does not work, the
message like “NO USB”, “ERROR”, “FULL” or “NO
REC” is displayed on the display window.
yy Multi card reader device, External HDD,
mobile phone can not be used for USB
recording.
yy A file is recorded by about 512 Mbyte when
you record for a long term.
yy You may not store more than 999 files.
yy It’ll be stored as follows.
AUDIO CD
MP3/ WMA
The other
source*
* : FM, PORTABLE and the like.
BT are not suppoted.
The making of unauthorized copies of copyprotected material, including computer
programs, files, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal offense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM2630-FR_DSGPLLK_ENG_4251.indd 20
2013-03-09
4:00:09
Operating
Using a Bluetooth
wireless technology
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music of a
Bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by using the
FUNCTION on the remote control or FUNC.
on the unit. “BT READY” appears in the display
window.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device.Your unit dispalys as “LG MICRO(XX:XX)”.
3
Operating
(The sound may be interrupted when the
connection is interfered by the other electronic
wave or you connect the bluetooth in the other
rooms.)
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with
Bluetooth® wireless technology can be operated
via the Cascade if the connection was made via
Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
21
,,Note
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG MICRO
(F7:08)” on your Bluetooth device.
3. Enter the PIN code.
PIN code : 0000
4. When this unit is successfully paired with
your Bluetooth device, “BT CONN” and “BT
PAIR”appears in the display window.
,,Note
Depending on the Bluetooth device type,
some devices have a different pairing way.
5. Listening to music.
To play a music stored on your Bluetooth
device, refer to your Bluetooth device’s user
guide. According to your Bluetooth device’s
volume level, the volume level of Bluetooth will
be adjusted.
,,Note
yy Sound from the main set can be distorted
if you raise the volume of Bluetooth device
up to two-thirds or more.
yy When you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
CM2630-FR_DSGPLLK_ENG_4251.indd 21
2013-03-09
4:00:09
22 Operating
,,Note
yy After searching for this unit on your
Bluetooth device, connect the Bluetooth
device with this unit. Then play the file you
want.
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
3
yy You cannot control the Bluetooth device
with this unit.
Operating
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Although the distance between your
Bluetooth and the set is less than 10m, if
there are obstacles between both, your
Bluetooth device cannot be connected.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy When not connected the Bluetooth, “BT
READY” appears in the display window.
yy The Electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will be
disconnected when the space between
the Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10m.
yy If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
CM2630-FR_DSGPLLK_ENG_4251.indd 22
2013-03-09
4:00:09
Operating 23
Using LG Bluetooth
Remote app
Install “ LG Bluetooth Remote app ”
by using QR code
About LG Bluetooth Remote app
2. Tap an icon for installation.
3. Tap an icon for downloading.
3
Operating
LG Bluetooth Remote app bring a suite of new
features to your unit. To enjoy more features, you
are recommended to download and install free “ LG
Bluetooth Remote”.
1. Install “ LG Bluetooth Remote app” by using QR
code. Use the scaning software to scan the QR
code.
Install “ LG Bluetooth Remote app”
through “ Apple App Store” or
“Google Android Market”
1. Tap the Apple App Store icon or Google
Android Market(Google Play Store) icon.
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your powered Bluetooth
device is connected to the Internet.
yy Make sure that your powered Bluetooth
device is equipped with “ Apple App Store”
or “Google Android Market(Google Play
Store)”
,,Note
yy Make sure that your powered Bluetooth
device is connected to the Internet.
yy Make sure that your powered Bluetooth
device has a scanning software application.
If you don’t have one, download one from
“Google Android Market(Google Play Store)”
or “Apple App Store”
Activate Bluetooth with LG
Bluetooth Remote app
LG Bluetooth Remote app helps to connect your
powered Bluetooth device to the unit.
1.Tap LG Bluetooth Remote app icon on the
home screen to open LG Bluetooth Remote app
application, and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
CM2630-FR_DSGPLLK_ENG_4251.indd 23
2013-03-09
4:00:09
24 Operating
,,Note
yy BT app will be available in the software
version as follow;
Android O/S : 2.3.3(or late)
iOS O/S : 4.3(or late)
3
yy While using Bluetooth, you may not operate
BT app. Disconnect Bluetooth device you
have connected before to use BT app
properly.
Operating
yy If you use BT app for operation, there would
be some differences between BT app
and the supplied remote control. Use the
supplied remote control as necessary.
yy If you operate BT app with Bluetooth
device connected, the Blutooth
connection you have connected before
may be disconnected. (Depending on
the smartpone’s O/S, this process has a
difference.)
yy Depending on the Bluetooth device, BT.app
may not work.
yy In Bluetooth function, if you use BT app, the
supplied remote control may not work.
yy When using BT app for remote control, the
operation may differ from the supplied
remote control.
yy According to the smartphone’s operating
system, you have some differences for BT
app’s operation.
yy When your Bluetooth device have been
already connected with other unit,
disconnect the Bluetooth connection first.
Then you can control your player through
BT app.
yy The connection you’ve made may be
disconnected if you select other application
or change the setting of the connected
device via BT app.In such case, please check
the connection status.
yy After connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
CM2630-FR_DSGPLLK_ENG_4251.indd 24
2013-03-09
4:00:09
Troubleshooting 25
Troubleshooting
Problem
No Power.
No sound.
Correction
yy Plug in the power cord.
yy Check the condition by operating other electronic devices.
Press FUNCTION or FUNC. and check the selected function.
yy Insert a playable disc.
4
yy Clean the disc. (Refer to the 28 page)
Troubleshooting
The unit does not start
playback.
yy Insert the disc with the label or printed side facing upward.
yy Connect the antenna securely.
Radio stations cannot be yy Tune to the station manually.
tuned in properly.
yy Preset some radio stations, see page 17 for details.
yy Operate the remote control within about 23 ft (7 m).
The remote control does yy Remove the obstacle in the path of the remote control and the unit.
not work properly.
yy Replace the batteries with new ones.
Clock is not displayed.
Connect your Bluetooth device to your unit through BT app for time sync.
CM2630-FR_DSGPLLK_ENG_4251.indd 25
2013-03-09
4:00:09
26 Appendix
Trademarks and
Licenses
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
5
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Appendix
Other trademarks and trade names are those of
their respective owners.
CM2630-FR_DSGPLLK_ENG_4251.indd 26
2013-03-09
4:00:09
Appendix 27
Specifications
General
Power supply
Refer to the main label.
Power consumption
Refer to the main label.
Dimensions (W x H x D)
286 x 135 x 293 mm
Net Weight (Approx.)
3.8 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Bus Power Supply
DC 5 V 0 500 mA
Inputs
PORT. IN
0.5 Vrms (3.5 mm stereo jack)
Tuner
FM Tuning Range
5
87.5 MHz to 108.0 MHz or 87.50 MHz to 108.00 MHz
Appendix
Amplifier
Stereo mode
80 W + 80 W
T.H.D
10 %
CD
Frequency Response
30 to 20000 Hz
Signal-to-noise ratio
80 dB
Dynamic range
80 dB
Speakers
Type
3 Way 4 Speaker
Impedance
4Ω
Rated Input Power
80 W
Max. Input Power
160 W
Net Dimensions (WxHxD)
132 x 286 x 304 mm
Net Weight (1EA)
4 kg
yy Design and specifications are subject to change without notice.
CM2630-FR_DSGPLLK_ENG_4251.indd 27
2013-03-09
4:00:10
28 Appendix
Maintenance
Notes on Discs
Handling Discs
Never stick paper or tape on the disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
5
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
Do not use volatile liquids such as insecticide spray
near the unit.
Wiping with strong pressure may damage the
surface.
Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Cleaning the unit
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
CM2630-FR_DSGPLLK_ENG_4251.indd 28
2013-03-09
4:00:10
CM2630-FR_DSGPLLK_ENG_4251.indd 29
2013-03-09
4:00:10
CM2630-FR_DSGPLLK_ENG_4251.indd 30
2013-03-09
4:00:10
Download PDF

advertising