LG | HB906SB | LG HB906SB Owner’s Manual

OWNER’S MANUAL
Network 3D Blu-ray™
Home Theater
Please read this manual carefully before operating
your set and retain it for future reference.
HB906SB (HB906SB, SH96SB-F/S/C, SH95TA-W)
P/NO : SAC3509561
Getting Started
3
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
4
Getting Started
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Getting Started
Notes on Copyrights
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for BD format, which imposes certain restrictions
including playback restrictions for BD-ROM
Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Centre.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
Important Notice for TV colour
system
The colour system of this player differs according to
currently playing discs.
For example, when the player plays the disc
recorded in the NTSC colour system, the image is
output as an NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
yy If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
yy The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it off and then on to see
normal images on screen.
yy Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
1
Getting Started
yy Because AACS (Advanced Access Content
System) is approved as content protection
system for BD format, similar to use of CSS
(Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
5
6
Table of Contents
Table of Contents
1
Getting Started
3
8
8
Safety Information
Introduction
– Playable Discs and symbols used in
this manual
– About the “7” Symbol Display
– File compatibility
– AVCHD (Advanced Video Codec High
Definition)
– About DLNA
– Certain System Requirements
– LG Remote
– WOL (Wake On LAN)
– Regional Code
– Compatibility Notes
Remote control
Front panel
Rear panel
9
10
11
11
12
12
12
12
12
13
14
15
2 Connecting
16
17
17
18
18
19
20
20
21
21
22
22
22
23
24
24
25
27
27
Positioning the system
Speaker Connection
– Attaching the speakers to the player
Connecting to Your TV
– HDMI Connection
– What is SIMPLINK?
– Component Video Connection
– Video Connection
– Resolution Setting
Antenna connection
Connections with external device
– AUX Connection
– PORT. IN connection
– OPTICAL IN connection
Connecting to your Home Network
– Wired network connection
– Wired Network Setup
USB device connection
– Playback content in the USB device
3 System Setting
28
28
28
30
30
31
32
33
35
Settings
– Adjust the Setup Settings
– [DISPLAY] Menu
– [LANGUAGE] Menu
– [AUDIO] Menu
– [LOCK] Menu
– [NETWORK] Menu
– [OTHERS] Menu
Sound Effect
4 Operating
36
36
36
36
37
37
38
39
40
40
40
41
41
41
42
42
43
43
43
44
44
44
45
45
45
46
46
47
47
47
47
General Playback
– Using [HOME] menu
– Playing a Disc
– Playing a file on a disc/USB device
– Playing Blu-ray 3D disc
– Enjoying BD-Live™
– Playing a file on a network server
– Basic operations for video and audio
content
– Basic operations for photo content
– Using the disc menu
– Resume playback
Advanced Playback
– Repeat Playback
– Repeating a specific portion
– Marker Search
– Using the search menu
– Changing content list view
– Viewing content information
– Selecting a subtitle file
– Last Scene Memory
– Applying your photo to the Wallpaper
– Options while viewing a photo
– Listening to music while slide show
On-Screen display
– Displaying content information onscreen
– Playing from selected time
– Hearing a different audio
– Selecting a subtitle language
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing subtitle code page
Table of Contents
48 – Changing the Picture Mode
48 Audio CD Recording
50 Viewing information from Gracenote
Media Database
51 Playing the iPod
51 – Enjoying iPod on the screen
52 – Enjoying the iPod IN mode
53 Radio Operations
53 – Listening to the radio
53 – Presetting the Radio Stations
53 – Deleting a saved station
53 – Deleting all the saved stations
53 – Improving poor FM reception
54 Using the Premium
5 Troubleshooting
55
55
56
57
57
57
57
Troubleshooting
– General
– Network
– Picture
– Sound
– Customer Support
– Open source software notice
7
6 Appendix
58 Controlling a TV with the Supplied
Remote Control
58 – Setting up the remote to control your
TV
59 Network Software Update
59 – Network update notification
59 – Software Update
61 About Nero MediaHome 4 Essentials
61 – Installing Nero MediaHome 4
Essentials
62 – Sharing files and folders
63 Area Code List
64 Language code List
65 Trademarks and Licenses
67 Video Output Resolution
68 Specifications
70 Maintenance
70 – Handling the Unit
70 – Notes on Discs
71 Important Information Relating to
Network Services
1
2
3
4
5
6
8
Getting Started
Introduction
1
Playable Discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Description
yy Discs such as movies that can be purchased or
rented.
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yy BD-R/RE discs that are recorded in BDAV format.
Blu-Ray
y
u
i
r
DVD-ROM
yy BD-R/RE discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Movie mode and finalized only
yy Supports the dual layer disc also
DVD-R
DVD-RW
DVD+R
DVD+RW
(8 cm /
12 cm)
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW
(VR)
(8 cm /
12 cm)
r
Audio CD
(8 cm /
12 cm)
t
CD-R/RW
(8 cm /
12 cm)
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
VR mode and finalized only
Note
–
Caution
–
Audio CD
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible
damages from abuse.
Getting Started
,,Note
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
1
Getting Started
yy Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the
unit.
9
10
Getting Started
File compatibility
Movie files
1
Getting Started
File
Location
File
Extension
Codec Format
Audio Format
Subtitle
“.avi”, “.divx”,
“.mpg”, “.mpeg”,
“.mkv”, “.mp4”,
“.asf”, “.wmv”,
“.m4v” (DRM
free)
DIVX3.xx, DIVX4.xx,
DIVX5.xx, DIVX6.xx
(Standard playback
only), XVID, MPEG1 SS,
H.264/MPEG-4 AVC,
MPEG2 PS, MPEG2 TS,
VC-1 SM (WMV3)
Dolby Digital,
DTS, MP3,
WMA, AAC,
AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub
(.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer
(.txt), DVD Subtitle System (.txt)
“.avi”, “.divx”,
“.mpg”, “.mpeg”,
“.mkv”, “.mp4”,
DLNA, PC
“.asf”, “.wmv”,
DIVX3.xx, DIVX4.xx,
DIVX5.xx, DIVX6.xx,
XVID, MPEG1 SS,
H.264/MPEG-4 AVC,
MPEG2 PS, MPEG2 TS,
VC-1 SM (WMV3)
Dolby Digital,
DTS, MP3,
WMA, AAC,
AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), SubViewer
1.0 (.sub), SubViewer 2.0 (.sub/.
txt), TMPlayer (.txt), DVD Subtitle
System (.txt)
Disc,
USB
Music files
File
Location
File
Extension
Disc,
USB,
DLNA, PC
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free)
Sampling Frequency
Bitrate
Note
within 32 - 48 kHz (WMA), within 20 - 320 kbps Some wav files are
within 16 - 48 kHz (MP3) (WMA), within
not supported on this
32 - 320 kbps (MP3) player.
Photo files
File
Location
Disc,
USB,
DLNA, PC
File
Extension
“.jpg”, “.jpeg”,
“.png”,
Recommanded
Size
Note
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
Getting Started
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/folder: Less than 2 000
(total number of files and folders)
yy File compatibility may differ depending on
the server.
yy Because the compatibility on DLNA server
are tested on the bundle DLNA server (Nero
MediaHome 4 Essentials) environment, file
requirements and playback functions may
differ depending on media servers.
yy The file requirements on page 10 are not
always compatible. There may have some
restrictions by file features and media
server’s ability.
yy Playing a movie subtitle files are only
available on share folder of a PC or DLNA
media server created by supplied Nero
MediaHome 4 Essentials software on this
player package.
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
yy This unit cannot support the ID3 Tag
embedded MP3 file.
yy The total playback time of audio file
indicated on the screen may not correct for
VBR files.
yy HD movie files contained on the CD or USB
1.0/1.1 may not played properly. BD, DVD or
USB 2.0 are recommended to play back HD
movie files.
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. For a file
with higher level, the warning message will
appear on the screen.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
AVCHD (Advanced Video
Codec High Definition)
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital
video camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
About DLNA
This Player is a DLNA Certified digital media player
that can display and play movie, photo and music
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
1
Getting Started
yy Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
11
12
1
Getting Started
Getting Started
Certain System Requirements
Compatibility Notes
For high definition video playback:
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
yy High definition display that has COMPONENT or
HDMI input jacks.
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For playing files on your PC’s share folder via your
home network, the PC requires below.
yy Windows® XP (Service Pack 2 or higher),
Windows Vista® (no Service Pack required)
Windows 7® (no Service Pack required)
yy 1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
yy Network environment: 100 Mb Ethernet
yy More than 1 folder on your PC has to be shared.
Visit suppot link of your operating system for
more information on file share settings.
LG Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point.
Visit “Apple iTunes” or “Google Apps Marketplace” for
detailed information of “LG Remote”.
WOL (Wake On LAN)
Users can turn on this player using WOL embeded
utility on your personal computer or smartphone
via your home network. To use this feature, this
player must be connected to the WOL available
access point or router with wired network
connection. Refer to the relevant manual of
the utility or network devices for more detailed
information.
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or “ALL”.
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-Video supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1/ Final Standard Profile). Secondary video and
audio can be played from a disc compatible with
the picture-in-picture function. For the playback
method, refer to the instructions in the disc.
yy Viewing high-definition content and upconverting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
yy Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 5.1 channels if you
use HDMI connection for the audio output of the
unit.
yy You can use a USB device to store some disc
related information, including downloaded online content. The disc you are using will control
how long this information is retained.
Getting Started
13
Remote control
• • • • • • a • • • • • • B (OPEN/CLOSE): Opens and
closes the disc tray.
RADIO&INPUT: Changes input
mode.
0-9 numerical buttons: Selects
numbered options in a menu or
inputs letters in the keypad menu.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • b • • • • • •
c/v (SCAN): Searches
backward or forward.
TUNING +/-: Tunes in the desired
radio station.
ENTER (b): Acknowledges menu
selection.
BACK (x): Exits the menu or
resumes playback. The resume
play function may not work
depending on the BD-ROM disc.
TITLE/POP-UP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
DISC MENU: Accesses menu on a
disc.
• • • • • • d • • • • • •
M (PAUSE): Pauses playback.
SPEAKER LEVEL: Sets the sound
level of desired speaker.
MARKER: Marks any point during
playback.
SOUND EFFECT: Selects a sound
effect mode.
SEARCH: Displays or exits the
search menu.
VOL +/-: Adjusts speaker volume.
SLEEP: Sets a certain period of
time after which the unit will
switch to off.
Z (STOP): Stops playback.
z (PLAY): Starts playback.
OPTICAL: Changes input mode to
optical directly.
MUTE: Mute the unit.
• • • • • • c • • • • • •
Remove the battery cover on the
rear of the Remote Control, and
insert two R03 (size AAA) batteries
with 4 and 5 matched correctly.
PRESET +/-: Selects programme
of Radio.
Colored (R, G, Y, B) buttons:
- Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC] and [Premium]
menu.
- B button: Selects mono/ stereo
in FM mode.
C/V (SKIP): Goes to the
next or previous chapter / track /
file.
Battery Installation
Direction buttons: Selects an
option in the menu.
HOME (n): Displays or exits the
[Home Menu].
MUSIC ID: When connected
to the network, can provide
information about the current
song while movie playback.
INFO/DISPLAY (m): Displays or
exits On-Screen Display.
X (REC): Records an audio CD.
TV Control Buttons: See page 58.
1
Getting Started
1 (POWER): Switches the player
ON or OFF.
14
Getting Started
Front panel
1
Getting Started
a 1/! (POWER) Button
>>Caution
b Disc Tray
Precautions in using the touch buttons
c Remote Sensor
yy Use the touch buttons with clean and dry
hands.
- In a humid environment, wipe out any
moisture on the touch buttons before
using.
d Display Window
e Volume Control
f PORT. IN
g USB Port
h Operation buttons
B (OPEN/CLOSE)
d/M (PLAY / PAUSE)
Z (STOP)
C/V (SKIP)
F (Function)
Changes the input source or function.
yy Do not press the touch buttons hard to
make it work.
- If you apply too much strength, it can
damage the sensor of the touch buttons.
yy Touch the button that you want to work in
order to operate the function correctly.
yy Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
Getting Started
15
Rear panel
1
Getting Started
a AC power cord
g VIDEO OUT
b Speakers connectors
h COMPONENT VIDEO (Y PB PR)
OUTPUT (PROGRESSIVE SCAN)
c Cooling Fan
d LAN port
e OPTICAL IN
f HDMI OUT
i Antenna Connector
j iPod (24 pin)
Connect to the furnished iPod cradle.
k AUX (L/R) INPUT
C
G
Connecting
16
F
A
D
2
A
A
Positioning the system
E
A
The following illustration shows an example of
positioning the system. Note that the illustrations
Ain these instructions differ from the actual unit for
explanation purposes.
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A). A B C D E F G
Connecting
B
C
A
G
F
C
A
A
GB
B
A
A
A
A
E
E
A
E
A
A
D
A
A
E
A ABCD E F G
speaker (L)/
A A Front
B Cleft
D
EE F G
A D right
speaker (R):
C
A A B Front
EE F G
A
Place the front speakers to the sides of the monitor
or screen and as flush with the screen surface as
possible.
E
F G
A AA
B C Center
D E speaker:
Place the center speaker above or below the
monitor or screen.
A A B C D Surround
E F G left speaker (L)/
right speaker (R):
F G
A B C D E Surround
A
Place these speakers behind your listening position,
E
facing slightly inwards.
B C D E F Subwoofer:
G
The position of the subwoofer is not so critical,
because low bass sounds are not highly directional.
But it is better to place the subwoofer near the
front speakers. Turn it slightly toward the center of
the room to reduce the wall reflections.
C D E F G Unit
yy Place the center speaker at a safe distance
from the child’s reach.
Otherwise it may result in the speaker falling
down and causing personal injury and/or
property damage.
yy The speakers contain magnetic parts, so
colour irregularity may occur on the CRT
TV screen or PC monitor screen. Please use
the speakers away from the TV screen or PC
monitor screen.
B
B
C
CG
G
A
B A
A A
>>Caution
yy Be careful to make sure children not to put
their hands or any objects into the *speaker
duct.
*Speaker duct: A hole for plentiful bass
sound on speaker cabinet (enclosure).
Connecting
17
Speaker Connection
Attaching the speakers to the
player
1. Connect speaker wires to the player.
Each speaker wire is color-coded. Use matching
color wires for corresponding speakers.
2
Connecting
Color
Speaker
Position
Grey
Rear
Rear right
Blue
Rear
Rear left
Green
Center
Center
Orange
Sub
woofer
Any front position
Red
Front
Front right
White
Front
Front left
2. Connect the speaker wire to the terminal on the
speaker.
Make sure the wire marked black goes in to the
terminal marked “–” (minus) and the other wire
goes in to the terminal marked “+” (plus).
18
Connecting
Connecting to Your TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
yy HDMI connection (page 18)
yy Component Video connection (page 20)
HDMI Connection
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
speed HDMI™ cable with Ethernet). Connect the
HDMI jack on the player to the HDMI jack on a
HDMI compatible TV or monitor.
yy Video connection (page 20)
2
,,Note
Rear of the unit
Connecting
yy Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the player.
Use only one of the connections described
in this manual.
yy Please refer to the manuals of your TV,
stereo system or other devices as necessary
to make the best connections.
yy Make sure the player is connected directly
to the TV. Tune the TV to the correct video
input channel.
HDMI
cable
TV
yy Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-- The picture will not be displayed properly
with non-HDCP device.
Connecting
19
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 21.)
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
,,Note
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
2
Connecting
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 29).
20 Connecting
Component Video Connection
Video Connection
Connect the COMPONENT VIDEO OUT jacks on the
player to the corresponding input jacks on the TV
using component video cable. You can hear the
sound the through the system’s speaker.
Connect the VIDEO OUT jack on the player to the
video in jack on the TV using a video cable. You can
hear the sound through the system’s speakers.
Rear of the unit
2
Rear of the unit
Connecting
Video cable
Component
video cable
TV
,,Note
When you use COMPONENT VIDEO OUT
connection, you can change the resolution for
the output. (Refer to “Resolution setting” on
page 21.)
TV
Connecting
Resolution Setting
The player provides several output resolutions for
HDMI OUT and COMPONENT VIDEO OUTPUT jacks.
You can change the resolution using [Setup] menu.
21
Antenna connection
Connect the supplied antenna for listening to the
radio.
1. Press HOME (n).
2. Use A/D to select the [Setup] and press ENTER
(b). The [Setup] menu appears.
3. Use W/S to select [DISPLAY] option then
press D to move to the second level.
2
Connecting
4. Use W/S to select the [Resolution] option
then press ENTER (b) to move to the third level.
Rear of the unit
5. Use W/S to select the desired resolution then
press ENTER (b) to confirm your selection.
,,Note
yy If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
1. Press B to open the disc tray.
2 Press Z (STOP) for more than 5 seconds.
yy Since several factors affect the resolution of
video output, see “Video Output Resolution”
on page 67.
,,Note
After connecting the FM wire antenna, keep
it as horizontal as possible. Be sure to fully
extend the FM wire antenna.
22 Connecting
Connections with
external device
AUX Connection
You can enjoy the sound from an external
component through the speakers of this system.
2
Connecting
Connect the analog audio output jacks of your
component into the AUX L/R (INPUT) on this unit.
And then select the [AUX] option by pressing
RADIO&INPUT and ENTER (b).
PORT. IN connection
You can enjoy the sound from your portable audio
player through the speakers of this system.
Connect the headphones (or line out ) jack of the
portable audio player into the PORT. IN socket of
this unit. And then select the [PORTABLE] option by
pressing RADIO&INPUT and ENTER (b).
You can also use the F (Function) button on the
front panel to select the input mode.
You can also use the F (Function) button on the
front panel to select the input mode.
Rear of the unit
MP3
player, etc...
twZG—“ˆ Œ™SGŒ›ŠUUU
White
Red
To the audio output jacks
of your component
(TV, VCR, etc.)
Connecting 23
OPTICAL IN connection
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
Connect the optical output jack of your
component into the OPTICAL IN jack on the unit.
And then select the [OPTICAL] option by pressing
RADIO&INPUT and ENTER (b). Or press OPTICAL to
select directly.
Rear of the unit
To the digital
optical output jack
of your component
2
Connecting
You can also use the F (Function) button on the
front panel to select the input mode.
24 Connecting
Connecting to your
Home Network
2
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-LIVE interactivity and on-line
content services.
Connecting
Wired network connection
Broadband
service
Router
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
PC and/or DLNA certified server
,,Note
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from PCs
or DLNA servers, this player must be
connected to the same local area network
with them via a router.
Rear of the unit
Connecting 25
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
2. Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/D and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
4. The player will ask you to test the network
connection. Select [OK] and press ENTER (b) to
complete the network connection.
5. If you select [Test] and press ENTER (b) at
step 5 above, the network connection status is
displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.
2
Connecting
Before setting the wired network, you need to
connect the broadband internet to your home
network.
3. Select [OK] and press ENTER (b) to apply
network settings.
26 Connecting
Notes on Network Connection:
yy Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
yy Some internet contents may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
Connecting 27
USB device connection
This player can play movie, music and photo files
contained in the USB device.
Playback content in the USB
device
1. Insert a USB device to the USB port until it fits
into place.
,,Note
yy This player supports USB flash drive/
external HDD formatted in FAT16, FAT32 and
NTFS when accessing files (music, photo,
movie). However, for BD-LIVE and Audio CD
recording, only FAT16 and FAT32 formats
are supported. Use the USB flash drive/
external HDD formatted in either FAT16 or
FAT32 when using BD-LIVE and Audio CD
recording.
yy This unit can support up to 8 partitions of
the USB device.
yy Do not extract the USB device during
operation (play, etc.).
When you connect the USB device on the HOME
menu, the player plays a music file contained in the
USB storage device automatically. If the USB storage
device is containing various types of files, a menu
for the file type selection will appear.
File loading may takes few minutes depending on
the number of content stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
2. Press HOME (n).
3. Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
4. Select the [USB] option using W/S, and press
ENTER (b).
yy A USB device which requires additional
program installation when you have
connected it to a computer, is not
supported.
yy USB device: USB device that supports
USB1.1 and USB2.0.
yy Movie, music and photo files can be played.
For details of operations on each file, refer
to relevant pages.
yy Regular back up is recommended to
prevent data loss.
yy If you use a USB extension cable, USB HUB
or USB Multi-reader, the USB device may not
be recognized.
yy Some USB device may not work with this
unit.
yy Digital camera and mobile phone are not
supported.
yy USB Port of the unit cannot be connected
to PC. The unit cannot be used as a storage
device.
5. Select a file using W/S/A/D, and press
PLAY or ENTER (b) to play the file.
6. Withdraw the USB device carefully.
2
Connecting
yy The USB device can be used for the local
storage for enjoying BD-LIVE discs with
Internet.
28 System Setting
Settings
[DISPLAY] Menu
TV Aspect Ratio
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
1. Press HOME (n).
Select a TV aspect ratio option according to your TV
type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[4:3 Pan Scan]
3
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
System Setting
2. Use A/D to select the [Setup] and press
ENTER (b). The [Setup] menu appears.
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
3. Use W/S to select the first setup option, and
press D to move to the second level.
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
4. Use W/S to select a second setup option, and
press ENTER (b) to move to the third level.
5. Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.
System Setting 29
Resolution
HDMI Color Setting
Sets the output resolution of the Component and
HDMI video signal. Refer to page 21 and 67 for
details about the resolution setting.
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[Auto]
[YCbCr]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
Select when connecting to a HDMI display
device.
[1080p]
[RGB]
Select when connecting to a DVI display
device.
Outputs 1080 lines of progressive video.
Wallpaper
Outputs 1080 lines of interlaced video.
Changes the background of the initial screen.
[720p]
3D Mode
Outputs 720 lines of progressive video.
[576p]
Select the type of output mode for Blu-ray 3D disc
playback.
Outputs 576 lines of progressive video.
[Off]
[576i]
Blu-ray 3D disc playback will output as 2D
mode like a normal BD-ROM disc playback.
Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
,,Note
yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
[On]
Blu-ray 3D disc playback will output as 3D
mode.
Home Menu Guide
This function allows you to display or delete the
guide bubble on the Home Menu. Set this option
to [On] for displaying guide.
3
System Setting
[1080i]
30 System Setting
[LANGUAGE] Menu
[AUDIO] Menu
Display Menu
Speaker Setup
Select a language for the [Setup] menu and onscreen display.
To obtain the best possible sound, use the speaker
setup display to specify the volume of the speakers
you have connected and their distance from your
listening position. Use the test to adjust the volume
of the speakers to the same level.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
3
Refers to the original language in which the
disc was recorded.
System Setting
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
64.
[Speaker]
Select a speaker that you want to adjust.
[Volume]
[Off] (Disc Subtitle only)
Adjust the output level of each speaker.
Turn off Subtitle.
[Distance]
,,Note
Adjust the distance between each speaker and
the listening position.
Depending on the disc, your language setting
may not work.
[Test/ Stop test tone]
The speakers will emit a test tone.
[OK]
Confirms the setting.
[Cancel]
Cancels the setting.
System Setting
31
HD AV Sync
[LOCK] Menu
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this
is called HD AV Sync. Use W S to scroll up and
down through the delay amount, which you can
set at anything between 0 and 300 ms.
The [LOCK] settings affect only CinemaNow movie,
BD and DVD playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
DRC (Dynamic Range Control)
[Change]
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
,,Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
3
System Setting
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
32 System Setting
DVD Rating
[NETWORK] Menu
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
The [NETWORK] settings are needed to use the
software update, BD Live and on-line content
services.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
See “Connecting to your Home Network” on pages
24-26.
If you select [Unlock], parental control is not
active and the disc plays in full.
Connection Status
BD Rating
3
Connection Setting
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
System Setting
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
yy The [BD Rating] will be applied only for
the BD disc that containing the Advanced
Rating Control.
yy For the region using MPAA rating level, refer
to the table below as an example.
BD Rating
0
8
13
17
18
255
MPAA Rating
G
PG
PG-13
R
NC-17
Not restricted
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 63.
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
System Setting 33
BD-LIVE connection
[OTHERS] Menu
You can restrict Internet access when BD-LIVE
functions are used.
DivX VOD
[Permitted]
Internet access is permitted for all BD-LIVE
contents.
[Partially permitted]
Internet access is permitted only for BDLIVE contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-LIVE
contents without a certificate.
[Prohibited]
Premium
[Country Setting]
Select your area for displaying proper services
and contents on the [Premium] feature.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
,,Note
All the downloaded videos from DivX VOD
with this player’s registration code can only be
played back on this unit.
Auto Power Off
The screen saver appears when you leave the
player in Stop mode for about five minutes. If
you set this option to [On], the unit automatically
turns off within 25 minutes since the Screen Saver
is displayed. Set this option to [Off ] to leave the
screen saver until the unit is operated by the user.
3
System Setting
Internet access is prohibited for all BD-LIVE
contents.
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX video.
34 System Setting
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[BD Storage Clear]
Initializes the BD contents from the connected
USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have
to set all the activation for the on-line services
and network settings again.
3
System Setting
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
(see page 59-60).
Disclaimer Notice
Press ENTER (b) to view the notice of Network
Service Disclaimer.
System Setting 35
Sound Effect
[User EQ]: You can adjust the sound by raising or
lowering the level of specific frequency.
You can select a suitable sound mode. Press SOUND
EFFECT repeatedly until the desired mode appears
on the front panel display or the TV screen. The
displayed items for the equalizer maybe different
depending on sound sources and effects.
Setting the [User EQ]
[Natural]: You can enjoy comfortable and natural
sound.
[Bypass]: Software with multichannel surround
audio signals is played according to the way it was
recorded.
[Bass Blast]: Reinforce the bass sound effect from
front left and right speaker and subwoofer.
[Virtual]: You can enjoy more dynamic sound with
improved center channel.
[Game]: You can enjoy more virtual sound while
playing video games.
[Night]: This may be useful when you want to
watch movies at low volumes late at night.
[Up Scaler]: When listening to MP3 files or other
compressed music, you can enhance the sound.
This mode is available only to 2 channel sources.
[Loudness]: Improves bass and treble sound.
2. Use A/D to select the desired level.
Select [Cancel] option then press ENTER (b) to
cancel the setting.
Select [Reset] option then press ENTER (b) to reset
the all adjustments.
[Natural Plus]: You can enjoy the natural sound
effect same as 5.1 channel.
3
System Setting
[Clear Voice]: This mode makes voice sound clear,
improving the quality of voice sound.
1. Use W/S to select the desired frequency.
36 Operating
General Playback
Playing a Disc
ert
Using [HOME] menu
1. Press B (OPEN/CLOSE), and place a disc on the
disc tray.
The home menu appears when you press HOME
(n). Use W/S/A/D to select a category and
press ENTER (b).
2. Press B (OPEN/CLOSE) to close the disc tray.
f
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3. Press HOME (n).
4. Select [Movie] or [Music] using A/D, and press
ENTER (b).
5. Select [BD], [DVD], [VR] or [Audio] option using
W/S, and press ENTER (b).
,,Note
a [Movie] - Plays video contents.
4
b [Photo] - Plays photo contents.
Operating
c [Music] - Plays audio contents.
d
[Premium] - Displays the Premium Home
screen.
e [Input] - Changes input mode.
f [Setup] - Adjusts the system settings.
yy Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
yy Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
yy Unfinalized DVD VR format discs may not be
played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
Playing a file on a disc/USB
device
yui
This player can play movie, music and photo files
contained in the disc or USB device.
1. Insert a data disc on the tray or connect a USB
device.
2. Press HOME (n).
3. Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
4. Select [Data] or [USB] option using W/S, and
press ENTER (b).
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Operating 37
Playing Blu-ray 3D disc
e
Enjoying BD-Live™
e
This player can play the Blu-ray 3D discs which
contains separate views for the left and right eyes.
BD-Video supporting BD-Live (BD-ROM version 2
Profile 2) that has a network extension function
allows you to enjoy more functions such as
downloading new movie trailers by connecting this
unit to the internet.
Preparation
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
yy Check your TV is 3D capable and has HDMI
1.4 input(s).
ear 3D glasses to enjoy the 3D experience
yy W
if it is necessary.
yy Check whether the BD-ROM title is the Bluray 3D disc or not.
yy Connect an HDMI cable (High Speed HDMI™
Cable with Ethernet) between the player’s
HDMI output and TV’s HDMI input.
2. Press B (OPEN/CLOSE), and place a disc on the
disc tray.
3. Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready
TV for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
>>Caution
yy Watching a 3D content for a long period
time may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D,
it is strongly recommended to stop the
playback and rest until you feel normal.
2. Insert a USB storage device to the USB port on
the front panel.
A USB storage device is needed to download
bonus content.
3. Press HOME (n), and set the [BD-LIVE
connection] option on the [Setup] menu (page
33).
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
4. Insert a BD-ROM with BD-Live.
The operations are differ depending on the disc.
Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device
while content is being downloaded or a Bluray disc is still in the disc tray. Doing so may
damage the connected USB device and BDLive features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
,,Note
yy Some BD-Live contents may be restrictively
accessed in some territories by contents
provider’s own decision.
yy It may take up to several minutes to load
and start enjoying BD-Live contents.
4
Operating
1. Press HOME (n), and set the [3D Mode] option
on the [Setup] menu to [On] (page 29).
1. Check the network connection and settings
(pages 24-26).
38 Operating
Playing a file on a network
server
yui
This player can play movie, music and photo files
located in a PC or a DLNA server through your
home network.
1. Check the network connection and settings
(pages 24-26).
2. Press HOME (n).
3. Select [Movie], [Photo] or [Music] using A/D,
and press ENTER (b).
4. Select a DLNA media server or a share folder
on your PC on the list using W/S, and press
ENTER (b).
Entering a network user ID and the
password
Depending on your PC’s environment, you may
need to enter a network user ID and the password
for accessing a shared folder.
1. The keyboard menu appears automatically if the
network user ID and the password are required.
2. Use W/S/A/D to select a character then
press ENTER (b) to confirm your selection on
the virtual keyboard.
To enter a letter with an accent mark, press
INFO/DISPLAY (m) to display the extended
character set.
4
Operating
[Cancel] – Returns to the previous screen.
[Space] – Inserts a space at the cursor position.
If you want to rescan available media server,
press the green (G) colored button.
5. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
,,Note
yy The file requirements are described on page
10.
yy The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this player.
yy The subtitle file name and movie file name
have to be the same and located at the
same folder.
yy The playback and operating quality may be
affected by your home network condition.
yy You may experience connection problems
depending on your server’s environment.
[<–] – Deletes the previous character at the
cursor position.
[ABC / abc / #+-=&] – Change the keyboard
menu settings to capital letters, small letters or
symbols.
3. When you finish entering the network user ID
and password, select [OK] using W/S/A/D
and press ENTER (b) to access the folder.
The network user ID and password will be
remembered after accssing the folder for your
convenience. If you do not want the network user
ID and password to be remembered, press red (R)
colored button to un-tick the [Remember] check
box before accessing the folder.
Operating 39
Basic operations for video and
audio content
To stop playback
Press Z (STOP) while playback.
To pause playback
Press M (PAUSE) while playback.
Press d (PLAY) to resume playback.
To play frame-by-frame (Video)
Press M (PAUSE) while movie playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
To scan forward or backward
Press c or v to play fast forward or fast reverse
during playback.
To slow down the playing speed
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of contents in a folder together. In this
case, press C or V to go to the previous or
next content with same type.
4
Operating
You can change the various playback speeds by
pressing c or v repeatedly.
40 Operating
Basic operations for photo
content
To play a slide show
Press d (PLAY) to start slide show.
To stop a slide show
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press A or D
to go to the previous or next photo.
4
Operating
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu while playback, press DISC
MENU.
Use W/S/A/D buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears while playback.
Press TITLE/POPUP while playback, and use W/S/
A/D buttons to navigate through menu items.
Resume playback
eroyt
u
The unit records the point where you pressed the
Z (STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
yy On BD-Video discs with BD-J, the resume
playback function does not work.
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
Operating
41
Advanced Playback
Repeating a specific portion
erot
Repeat Playback
erotu
This player can repeat a portion you have selected.
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
BDs/DVDs
jA- – Selected portion will be repeated continually.
jChapter – The current chapter will be played
back repeatedly.
jTitle – The current title will be played back
repeatedly.
To return to normal playback, press REPEAT (h)
repeatedly to select [Off ].
1. While playback, press REPEAT (h) to select
[A-] at the beginning of the portion you wish to
repeat.
2. Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
3. To return to normal playback, press REPEAT
(h) repeatedly to select [Off ].
,,Note
yy You cannot select a portion less than 3
seconds.
yy This function may not work on some disc or
title.
Audio CDs/Music files
:All – All the tracks or files will be played back
repeatedly.
l – The tracks or files will be played back in
random order.
l:All – All the tracks or files will be played
back repeatedly in random order.
kA-B – Selected portion will be repeated
continually. (Audio CD only)
To return to normal playback, press CLEAR.
,,Note
yy If you press V once during Repeat
Chapter/Track playback, the repeat playback
cancels.
yy This function may not work on some disc or
title.
4
Operating
;Track– The current track or file will be played
back repeatedly.
42 Operating
Marker Search
eroy
Using the search menu
eroy
You can start playback from up to nine memorized
points.
Using search menu, you can easily to find the point
where you want to start playback.
To enter a marker
To search a point
1. While playback, press MARKER at the desired
point. The Marker icon appears on the TV screen
briefly.
1. During playback, press SEARCH to display the
search menu.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears on
the screen.
2. Press a number button to select a marker
number that you want to recall. Playback starts
from the marked scene.
4
To delete a Marker
Operating
1. Press SEARCH and the search menu appears on
the screen.
2. Press S to highlight a marker number.
Use A/D to select a marked scene that you
want to delete.
3. Press CLEAR and the marked scene is erased
from the search menu.
,,Note
yy This function may not work depending on
discs, titles, server ability.
yy All marked points are cleared if the title
is in complete stop (Z) mode, the title is
changed or if you unload the disc.
yy If the total length of the title is less than 10
seconds, this function is not available.
2. Press A/D to skip the playback 15 seconds
forward or backward. You can select a point that
you want to skip by pressing and holding
A/D button.
To start playback from a marked
scene
1. Press SEARCH and the search menu appears on
the screen.
2. Press S to highlight a marker number. Use
A/D to select a marked scene that you want
to start playback.
3. Press ENTER (b) to start playback from the
marked scene.
,,Note
yy This function may not work depending on
discs, titles, server ability.
yy This function may not work depending on
the file type and ability of the media server.
Operating 43
Changing content list view
yui
Viewing content information
y
On the [Movie], [Music] or [Photo] menu, you can
change the content list view.
The player can display the content information.
Method 1
2. Press INFO/DISPLAY (m) to display the option
menu.
Press red (R) colored button repeatedly.
1. Select a file using W/S/A/D.
3. Select the [Information] option using W/S,
and press ENTER (b).
The file information appears on the screen.
While movie playback, you can display the file
information by pressing TITLE/POPUP.
,,Note
The information displayed on the screen
may not correct comparing actual content
information.
If the subtitle file name is different from the movie
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1. Use W/S/A/D to select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER (b).
Method 2
1. On the content list, press INFO/DISPLAY (m) to
display the option menu.
2. Use W/S to select the [View Change] option.
3. Press ENTER (b) to change the content list
view.
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the movie file.
,,Note
yy If you press Z (STOP) while playback, the
subtitle selection is cancelled.
yy This function is not available for playing file
on a server via home network.
4
Operating
Selecting a subtitle file
y
44 Operating
Last Scene Memory
er
Options while viewing a photo
i
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
You can use various options during viewing a
photo in full screen.
,,Note
1. While viewing a photo in full screen, press INFO/
DISPLAY (m) to display the option menu.
2. Select an option using W/S.
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-Video discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
4
Operating
Applying your photo to the
Wallpaper
You can apply your photo to the wallpaper.
1. Press HOME (n).
2. Select [Photo] using A/D, and press ENTER
(b).
3. Select [Data] or [USB] option using W/S, and
press ENTER (b).
4. Select a photo file, and press INFO/DISPLAY (m)
to display the option menu.
5. Use W/S to select [Wallpaper], and press
ENTER (b) to apply.
The photo will be set as [Wallpaper 5] on the
[Setup] menu.
a Current photo/Total number of photos
– Use A/D to view previous/next photo.
b Slide Show – Press ENTER (b) to start or
pause slide show.
c Music Select – Select the background
music for the slide show (page 45).
d Music –Press ENTER (b) to start or pause
background music.
e Rotate – Press ENTER (b) to rotate the
photo clockwise.
f Zoom – Press ENTER (b) to display the
[Zoom] menu.
g Effect – Use A/D to select a transition
effect between photos in a slide show.
h Speed – Use A/D to select a delaying
speed between photos in a slide show.
3. Press BACK (x) to exit the option menu.
Operating 45
Listening to music while slide
show
i
You can display photo files while listening to music
files.
1. While viewing a photo in full screen, press INFO/
DISPLAY (m) to display the option menu.
2. Use W/S to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
3. Use W/S to select a device, and press ENTER
(b).
On-Screen display
You can display and adjust various information and
settings about the content.
Displaying content information
on-screen
eroy
1. While playback, press INFO/DISPLAY (m) to
show various playback information.
Device that you can select are differ depending
on the location of the photo file you are
displaying in full screen.
Available Device
Disc, USB
Disc, USB
Share Folder (PC)
Share Folder (PC)
DLNA server
DLNA server
4
Operating
Photo location
4. Use W/S to select a file or a folder you wish to
play.
a Title – current title number/total number of
titles
b Chapter – current chapter number/total
number of chapters
Select g and press ENTER (b) to display the
upper directory.
,,Note
When selecting music file from a server, folder
selection is not available. Only file selection is
available.
5. Use D to select [OK], and press ENTER (b) to
complete music selection.
c Time – elapsed playing time/total playback
time
d Audio – selected audio language or channel
e Subtitle – selected subtitle.
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect Ratio
h Picture Mode – selected picture mode
i Movie Information – Select this option and
press ENTER (b) to display movie information
from Gracenote Media Database (BD/DVD
only).
46 Operating
2. Select an option using W/S.
3. Use A/D to adjust the selected option value.
4. Press BACK (x) to exit the On-Screen display.
,,Note
yy If no button is pressed for a few seconds,
the on-screen display disappears.
yy A title number cannot be selected on some
discs.
1. Press INFO/DISPLAY (m) during playback. The
time search box shows the elapsed playing
time.
2. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
yy Available items may differ depending on
discs or titles.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
yy If BD interactive title is playing back, some
setting information is displayed on the
screen but prohibited to be changed.
Press A/D to skip the playback 60 seconds
forward or backward.
yy To use the [Movie Information] option, the
player must be connected to the broadband
internet for accessing the Gracenote Media
Database.
4
Playing from selected time
eroy
Operating
yy LG is a licensee of Gracenote technology
and is not responsible or liable for
information from the Gracenote Media
Database.
3. Press ENTER (b) to start playback from selected
time.
,,Note
yy This function may not work on some disc or
titles.
yy This function may not work depending on
the file type and ability of the DLNA server.
Hearing a different audio
eroy
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
2. Use W/S to select the [Audio] option.
3. Use A/D to select desired audio language,
audio track or audio channel.
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POP-UP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
Operating 47
Selecting a subtitle language
eroy
Changing the TV Aspect Ratio
eroy
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
You can change the TV aspect ratio setting while
playback.
2. Use W/S to select the [Subtitle] option.
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
3. Use A/D to select desired subtitle language.
4. Press BACK (x) to exit the On-Screen display.
,,Note
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
2. Use W/S to select the [Angle] option.
3. Use A/D to select desired angle.
4. Press BACK (x) to exit the On-Screen display.
3. Use A/D to select desired option.
4. Press BACK (x) to exit the On-Screen display.
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Setup] menu is
not changed.
Changing subtitle code page
y
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press INFO/DISPLAY (m) to
display the playback menu.
2. Use W/S to select the [Code Page] option.
3. Use A/D to select desired code option.
4. Press BACK (x) to exit the On-Screen display.
4
Operating
Watching from a different
angle
er
2. Use W/S to select the [TV Aspect Ratio]
option.
48 Operating
Changing the Picture Mode
eroy
You can change the [Picture mode] option while
playback.
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
2. Use W/S to select the [Picture Mode] option.
3. Use A/D to select desired option.
4. Press BACK (x) to exit the On-Screen display.
Setting the [User] option
1. During playback, press INFO/DISPLAY (m) to
display the On-Screen display.
2. Use W/S to select the [Picture Mode] option.
3. Use A/D to select the [User setting] option,
and press ENTER (b).
Audio CD Recording
You can record one desired track or all of the tracks
in Audio CD to a USB storage device.
1. Insert a USB storage device to the USB port on
the front panel.
2. Press B (OPEN/CLOSE), and place an Audio CD
on the disc tray.
Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
3. Press INFO/DISPLAY (m) to display the option
menu.
Or
Press X REC button on the remote control.
You can record all musics in the audio CD.
4. Use W/S to select [CD Recording] option, and
press ENTER (b).
5. Use W/S to select a track you wish to copy on
the menu, and press ENTER (b).
4
Operating
Repeat this step to select tracks as many as you
can.
Selects all the tracks on an
Audio CD.
4. Use W/S/A/D to adjust the [Picture Mode]
options.
Selects an encoding option
from the pop-up menu
(128kbps, 192kbps, 320kbps or
Lossless).
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
Cancels the recording and
returns to the previous screen.
5. Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.
6. Use W/S/A/D to select [Start], and press
ENTER (b).
7. Use W/S/A/D to select a destination folder
to be copied.
If you want to create a new folder, use
W/S/A/D to select [New Folder] and press
ENTER (b).
Operating 49
Enter a folder name using virtual keyboard, and
press ENTER (b) while [OK] is selected.
8. Use W/S/A/D to select [OK], and press
ENTER (b) to start Audio CD recording.
If you want to stop in progressing Audio CD
recording, press ENTER (b) while [Cancel] is
highlighted.
9. A message appears when Audio CD recording is
completed. Press ENTER (b) to check the audio
file created in the destination folder.
,,Note
yy The table below shows the average
recording time from an music track with 4
minutes of playback time to a audio file with
192 kbps as an example.
stop mode
while playback
1.4 min.
2 min.
yy Recording times in the table above are
approximate.
yy Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
yy The length of the audio should be longer
than 20 seconds for the proper recording.
yy Do not turn off this player or extract the
connected USB storage device during Audio
CD recording.
>>Caution
The recording or copying features on
this player are provided for your personel
and noncommercial use. The making of
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
Be Responsible
Respect Copyrights
Operating
yy Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
4
50 Operating
Viewing information
from Gracenote Media
Database
The player can access the Gracenote Media
Database and loads the music information so that
Track name, Artist Name, Genre and other text
information can be displayed on the list.
Audio CD
When you insert an Audio CD, the player starts
playback automatically and load the music title
from the Gracenote Media Database.
If there is no music information from the database,
music titles will not appear on the screen.
Music file
4
Operating
1. Select a music file or audio track using W/S/
A/D.
2. Press INFO/DISPLAY (m) to display the option
menu.
3. Select the [Information] option using W/S,
and press ENTER (b).
The player accesses to Gracenote Media
Database for the music information.
Blu-ray Disc/DVD/Movie file
While listening to a music from the movie being
played, press MUSIC ID to start loading the music
information from the Gracenote Media Database.
,,Note
yy The player must be connected to the
broadband internet for accessing the
Gracenote Media Database.
yy If the music information is not in the
Gracenote Media Database, message
appears on the screen.
yy Depending on the cases, it will takes a few
minutes to load music information from the
Gracenote Media Database.
yy Information may be displayed in broken
letters, if the language you selected is not
available on the Gracenote Media Database.
yy This function is not available for on-line
content and content in DLNA servers.
yy LG is a licensee of Gracenote technology
and is not responsible or liable for
information from the Gracenote Media
Database.
yy Audio CDs that users made for their only
private purposes cannot be supported in
this feature because they are not in the
Gracenote Media Database.
Operating
Playing the iPod
51
When you connect the iPod on the HOME menu,
the player plays a music automatically. Or a menu
for the file type selection will appear.
You can enjoy the sound with your iPod. For details
about iPod, refer to the iPod’s User Guide.
Preparation
yy To view iPod’s Videos and Photos on the TV
screen.
-- Be sure to use the video connection through
the VIDEO OUT jack on the rear panel of this
unit. Select the appropriate video input mode
on the TV.
-- Depending on the iPod, make sure that select
Videos > Video settings, and then set TV Out
to Ask or On from your iPod.
For details about Video Settings, refer to the
iPod User Guide.
Enjoying iPod on the screen
1. Connect the iPod firmly.
2. Press HOME (n).
3. Select [Music] or [Movie] using A/D, and press
ENTER (b).
If you connected the other device
(CD or USB), select the iPod on the menu.
4. Select a content using W/S/A/D, and
press ENTER (b) to play.
yy Before connecting the iPod, turn this unit off and
reduce the volume of this unit to its minimum.
1. Connect the cradle so that the mark s is
downwards. Put your iPod on it.
Connect the iPod firmly.
If you turn this unit on, your iPod is
automatically turned on and recharging starts.
You can search easily a content by power scroll
on the screen.
Power scroll
,,Note
If the iPod’s OSD language is selected to
simple chinese, the power scroll function is not
operated correctly.
4
Operating
-- The viewing photos is available only if this unit
is in iPod IN mode and you can view photos
only as a slide show. You have to start a slide
show on your iPod to view a photo on a TV.
For details about a slide show, refer to the iPod
User Guide.
2. Select a file using W/S/A/D, and press
ENTER (b) to play the file.
52 Operating
Enjoying the iPod IN mode
You can operate your iPod by using the supplied
remote control and controls on your iPod.
1. Connect the cradle so that the mark s is
downwards. Put your iPod on it.
Connect the iPod firmly.
If you turn this unit on, your iPod is
automatically turned on and recharging starts.
2. Press RADIO&INPUT to select iPod IN mode.
W/S/A/D
Selects an option in the menu.
d/ENTER
Starts playback the music or
video.
M
To pause while it is playing.
To resume playing, press d
(PLAY) again.
c/v
Fast-forward or rewind a song
or video
C/V
Skip the playback forward or
backward .
REPEAT
To select a desired repeat
mode: Track (;), All (k), Off
(No display).
4
,,Note
yy An error message “CHECK” or “Connected
iPod model is not supported.” appears when:
-- your iPod is not available for the function
to be operated.
yy An error message “CHECK” or “Please update
iPod’s software.” appears when:
-- your iPod has an old software version.
/Update your iPod software to latest
version.
Operating
yy If this unit displays an error message, follow
the message. An error message “CHECK” or
“Please check your iPod.” appears when:
-- the communication between this unit
and your iPod is failed.
/Undock & re-dock your iPod in this unit.
-- your iPod is not connected firmly.
-- this unit recognises your iPod as
unknown device.
-- your iPod is exceptionally low on power.
/The battery needs to be charged.
/If you charge the battery while iPod
is extremely low in power, it may take
longer to charge.
yy Compatibility with your iPod may vary
depending on the type of your iPod.
yy iPod touch and iPhone have any difference
in operation other than iPod. You may need
any additional control to use them with this
unit. (e.g. “slide to unlock”)
yy If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod dock of this unit and then use it.
yy Depending on your iPod’s software version,
it may not be possible to control your iPod
from this unit. We recommend installing the
latest software version.
yy The video quality depends on the video
sources on your iPod.
yy If you have a problem with your iPod, please
visit www.apple.com/support/ipod.
Operating 53
Radio Operations
Be sure that the antennas are connected.
(Refer to the page 21)
Listening to the radio
1. Press RADIO&INPUT until TUNER (FM) appears in
the display window. The last received station is
tuned in.
Deleting a saved station
1. Press PRESET (- / +) to select a preset number
you want to delete.
2. Press CLEAR, the preset number will blink in the
display window.
3. Press CLEAR again, to delete the selected preset
number.
Deleting all the saved stations
2. Press and hold TUNING (-/+) for about two
seconds until the frequency indication starts to
change. Scanning stops when the unit tunes in
a station. Or Press TUNING (-/+) repeatedly.
Press and hold CLEAR for two seconds.
“ERASE ALL” will flash up. Press CLEAR again. Then all
the saved stations are deleted.
3. Adjust the volume by rotating VOLUME on
the front panel or by pressing VOL (+/-) on the
remote control.
Improving poor FM reception
Presetting the Radio Stations
1. Press RADIO&INPUT until the TUNER (FM)
appears in the display window.
2. Select the desired frequency by using TUNING
(-/+).
3. Press ENTER (b). A preset number will flash in
the display window.
4. Press PRESET (-/+) to select the preset number
you want.
5. Press ENTER (b). The station is stored.
6. Repeat the steps 2 to 5 to store other stations.
4
Operating
You can preset 50 stations for FM.
Before tuning, make sure that you have turned
down the volume.
Press B (blue) (MONO/STEREO) colored button on
the remote control. This will change the tuner from
stereo to mono and usually improve the reception.
54 Operating
Using the Premium
You can use various content services via Internet
with the Premium feature.
1. Check the network connection and settings
(pages 24-26).
2. Press HOME (n).
3. Select the [Premium] using A/D, and press
ENTER (b).
4. Select an on-line service using W/S/A/D,
and press ENTER (b).
4
,,Note
Operating
yy Detailed information of each service,
contact to the content provider or visit
suppot link of the service.
yy The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most upto-date information.
yy When you are first time to access [Premium]
feature, current country setting appears. If
you want to change the country setting,
select [EDIT] and press ENTER (b).
Troubleshooting 55
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turned on.
yy Plug the power cord into the wall outlet securely.
The unit does not start
playback.
yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Place the disc with the playback side down.
yy Place the disc on the disc tray correctly inside the guide.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music files.
yy The files are not recorded in a format that the unit can play.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The unit does not support the codec of the movie file.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is not operating
normally.
You can reset the unit as follows.
1. Press and hold the POWER button for at least five seconds. This will
force the unit to power off then turn the unit back on.
2. Unplug the power cord, wait at least five seconds, and then plug it in
again.
5
Troubleshooting
The unit is plugged in, but the
power will not turn on or off.
56 Troubleshooting
Network
Symptom
Cause & Solution
BD-LIVE feature does not work.
yy The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (see page 24-26).
yy Your broadband speed may not fast enough to use the BD-LIVE
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
yy The [BD-LIVE connection] option in the [Setup] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such
as YouTube™, etc.) are often
stopped or “buffer” during
playback.
yy Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Shared folder or files from your
PC or a media server are not
displayed on the device list.
yy The firewall or anti-virus software on your media server is running.
Turn off the firewall or anti-virus software running on your PC or
media server.
yy The player is not connected to the local area network that your PC or
the media server are connected.
5
Troubleshooting
Troubleshooting 57
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not suppot the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears
yy You are playing a disc recorded in a colour system that is different
from your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does
not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable with Ethernet).
yy Your TV may not support “HDMI 1.4 3D mandatory format”.
yy The [3D Mode] option in the [Setup] menu is set to [Off ].
Set the option to [On].
Sound
5
Cause & Solution
There is no sound or the sound
is distorted.
yy The unit is in scan, slow motion, or pause mode.
yy The sound volume is low.
yy Check the speaker cable connection. (page 17)
Customer Support
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://lgservice.com or contact LG Electronics customer care centre.
Open source software notice
To obtain the corresponding source code under GPL, LGPL, MPL and other open source licenses, please
visit http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are
available to download with the source code.
Troubleshooting
Symptom
58 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing
You can
1 (TV POWER)
Turn the TV on or off.
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
PR/CH W/S
Scan up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV
,,Note
6
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Appendix
Appendix 59
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
Software Update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
Option 1:
yy During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
1. The update menu will appear on the screen
when you turn on the player.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
2. Use A/D to select a desired option and then
press ENTER (b).
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 24-26).
2. Select [Software] option in the [Setup] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
Starts the software update.
[Cancel]
Exits the update menu and
displays it next booting.
[Hide]
Exits the update menu and
it does not appear until next
software is uploaded in the
update server.
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
6
The player will check for the newest update.
,,Note
yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found.” appears. Press ENTER
(b) to return to the [Home Menu].
Appendix
[OK]
60 Appendix
4. If newer version exists, the message “Do you
want to update?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
6. When update is completed, the message,
“Update is complete.” will appear, and then
power will turn off automatically after 5
seconds.
7. Turn the power back on. The system now
operates with the new version.
,,Note
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer Support” on page
57.
6
Appendix
Appendix
About Nero
MediaHome 4
Essentials
Nero MediaHome 4 Essentials is a software for
sharing movie, music and photo files stored on your
computer to this player as a DLNA-compatiable
digital media server.
,,Note
yy The Nero MediaHome 4 Essentials CDROM is designed for PCs and should not
be inserted in this player or in any product
other than a PC.
yy The supplied Nero MediaHome 4 Essentials
CD-ROM is a customized software edition
only for sharing files and folders to this
player.
yy The supplied Nero MediaHome 4 Essentials
software does not support following
functions: Transcoding, Remote UI, TV
control, Internet services and Apple iTunes
yy This manual explains operations with
the English version of Nero MediaHome
4 Essentials as examples. Follow the
explanation referring to the actual
operations of your language version.
61
Installing Nero MediaHome 4
Essentials
Before you install Nero MediaHome 4 Essentials,
check the system requirement shown below.
yy Windows® XP (Service Pack 2 or higher), Windows
Vista® (no Service Pack required), Windows® XP
Media Center Edition 2005 (Service Pack 2 or
higher), Windows Server® 2003
yy Windows Vista® 64-bit edition (application runs
in 32-bit mode)
yy Hard drive space: 200 MB hard drive space for a
typical installation of Nero MediaHome standalone
yy 1.2 GHz Intel® Pentium® III or AMD
Sempron™ 2200+ processors
yy Memory: 256 MB RAM
yy Graphics card with at least 32 MB video memory,
minimum resolution of 800 x 600 pixels, and 16bit color settings
yy Windows® Internet Explorer® 6.0 or higher
yy DirectX® 9.0c revision 30 (August 2006) or higher
yy Network environment: 100 Mb Ethernet
Start up your computer, and insert the supplied CDROM disc into your computer’s CD-ROM drive. An
installation wizard will walk you through the quick
and uncomplicated installation process. To install
Nero MediaHome 4 Essentials, proceed as follows:
1. Close all Microsoft Windows programs and exit
any anti-virus software that may be running.
3. Click [Nero MediaHome 4 Essentials].
4. Click [Run] to start installation.
5. Click [Nero MediaHome 4 Essentials]. The
installation is prepared and the installation
wizard appears.
6. Click the [Next] button to display the serial
number input screen. Click [Next] to go to the
next step.
Appendix
2. Insert the supplied CD-ROM disc into your
computer’s CD-ROM drive.
6
62 Appendix
7. If you accept all conditions, click [I accept
the License Conditions] check box and click
[Next]. Installation is not possible without this
agreement.
8. Click [Typical] and click [Next]. The installation
process is started.
9. If you want to take part in the anonymous
collection of data, select the check box and click
the [Next] button.
10.Click the [Exit] button to complete the
installation.
Sharing files and folders
On your computer, you must share the folder
contained movie, music and/or photo content to
play them on this player.
This parts explains the procedure for selecting the
shared folders on your computer.
1. Double-click the “Nero MediaHome 4 Essentials”
icon on the desktop.
2. Click [Network] icon on the left and define your
network name in the [Network name] field. The
Network name you enter will be recognized by
your player.
3. Click [Shares] icon on the left.
4. Click [Local Folders] tab on the [Shares] screen.
5. Click [Add] icon to open the [Browse Folder]
window.
6. Select the folder containing the files you want
to share. The selected folder is added to the list
of shared folders.
7. Click [Start Server] icon to start the server.
,,Note
yy If the shared folders or files are not displayed
on the player, click the folder on the [Local
Folders] tab and click [Rescan Folder] at the
[More] button.
yy Visit www.nero.com for more information
and software tools
6
Appendix
Appendix 63
Area Code List
Choose an area code from this list.
Area
Code Area
Code Area
Code Area
Code
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia SI
Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
LY Russian
LU Federation Vietnam RU Zimbabwe SA
SN
TH
VN
ZW
6
Appendix
64 Appendix
Language code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
6
Appendix
Language
Code
Language
Code
Language
Code
Language
Code
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Ameharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Language Code
Basque 6985
Hebrew 7387
Nepali 7869
Tajik 8471
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Tamil 8465
Bhutani 6890
Hungarian 7285
Oriya 7982
Telugu 8469
Bihari 6672
Icelandic 7383
Panjabi 8065
Thai 8472
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Tonga 8479
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkish 8482
Burmese 7789
Irish 7165
Polish 8076
Turkmen 8475
Byelorussian 6669
Italian 7384
Portuguese 8084
Twi 8487
Chinese 9072
Japanese 7465
Quechua 8185
Ukrainian 8575
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Urdu 8582
Czech 6783
Kashmiri 7583
Rumanian 8279
Uzbek 8590
Danish 6865
Kazakh 7575
Russian 8285
Vietnamese 8673
Dutch 7876
Kirghiz 7589
Samoan 8377
Volapük 8679
English 6978 Korean 7579
Sanskrit 8365
Welsh 6789
6979
Kurdish 7585
Scots Gaelic 7168
Wolof 8779
Estonian 6984
Laothian 7679
Serbian 8382
Xhosa 8872
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yiddish 7473
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Yoruba 8979
Finnish 7073
Lingala 7678
Zulu 9085
Esperanto Appendix 65
Trademarks and
Licenses
Blu-ray Disc™, Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,392,195; 7,272,567;
7,333,929; 7,212,872 & other U.S. and worldwide
patents issued & pending. DTS and the Symbol
are registered trademarks,& DTS-HD, DTS-HD
Master Audio | Essential and the DTS logos
are trademarks of DTS, Inc. Product includes
software. © DTS, Inc. All Rights Reserved.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
“x.v.Color” is a trademark of Sony Corporation.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
6
Appendix
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
66 Appendix
DivX®, DivX Certified® and associated logos
are trademark of DivX, Inc., and are used under
license.
Gracenote®, Gracenote logo and logotype,
and the “Powered by Gracenote” logo are
either registered trademarks or trademarks of
Gracenote, Inc. in the United States and/or other
countries.
Music recognition technology and related data
are provided by Gracenote®.
Portions of the content is copyright © Gracenote
or its providers.
Gracenote® End User License Agreement
6
Appendix
This application or device contains software from
Gracenote, Inc. of Emeryville, California
(“Gracenote”). The software from Gracenote (the
“Gracenote Software”) enables this application to
perform disc and/or file identification and obtain
music-related information, including name, artist,
track, and title information (“Gracenote Data”) from
online servers or embedded databases (collectively,
“Gracenote Servers”) and to perform other
functions. You may use Gracenote Data only by
means of the intended End-User functions of this
application or device.
You agree that you will use Gracenote Data, the
Gracenote Software, and Gracenote Servers for
your own personal non-commercial use only. You
agree not to assign, copy, transfer or transmit the
Gracenote Software or any Gracenote Data to any
third party. YOU AGREE NOT TO USE OR EXPLOIT
GRACENOTE DATA, THE GRACENOTE SOFTWARE,
OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY
PERMITTED HEREIN.
You agree that your non-exclusive license to use
the Gracenote Data, the Gracenote Software, and
Gracenote Servers will terminate if you violate
these restrictions. If your license terminates, you
agree to cease any and all use of the Gracenote
Data, the Gracenote Software, and Gracenote
Servers. Gracenote reserves all rights in Gracenote
Data, the Gracenote Software, and the Gracenote
Servers, including all ownership rights. Under
no circumstances will Gracenote become liable
for any payment to you for any information that
you provide. You agree that Gracenote, Inc. may
enforce its rights under this Agreement against you
directly in its own name.
The Gracenote service uses a unique identifier to
track queries for statistical purposes. The purpose
of a randomly assigned numeric identifier is to
allow the Gracenote service to count queries
without knowing anything about who you are.
For more information, see the web page for the
Gracenote Privacy Policy for the Gracenote service.
The Gracenote Software and each item of
Gracenote Data are licensed to you “AS IS.”
Gracenote makes no representations or warranties,
express or implied, regarding the accuracy of any
Gracenote Data from in the Gracenote Servers.
Gracenote reserves the right to delete data from
the Gracenote Servers or to change data categories
for any cause that Gracenote deems sufficient. No
warranty is made that the Gracenote Software or
Gracenote Servers are error-free or that functioning
of Gracenote Software or Gracenote Servers will
be uninterrupted. Gracenote is not obligated to
provide you with new enhanced or additional data
types or categories that Gracenote may provide in
the future and is free to discontinue its services at
any time.
GRACENOTE DISCLAIMS ALL WARRANTIES EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
IMPLIED WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND
NON-INFRINGEMENT. GRACENOTE DOES NOT
WARRANT THE RESULTS THAT WILL BE OBTAINED
BY YOUR USE OF THE GRACENOTE SOFTWARE
OR ANY GRACENOTE SERVER. IN NO CASE WILL
GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL
OR INCIDENTAL DAMAGES OR FOR ANY LOST
PROFITS OR LOST REVENUES.
© Gracenote, Inc. 2009
Appendix 67
Video Output Resolution
When the non-copy protected media is playing back
Video Out
Resolution
HDMI OUT
COMPONENT VIDEO OUT
HDMI connected
HDMI disconnected
576i
576p
576i
576p
576p
576p
720p
720p
720p
1080i
1080i
1080p/24 Hz
1080p / 24 Hz
576i
1080i
1080i
1080p / 50 Hz
1080p / 50 Hz
576i
1080i
When the copy protected media is playing back
Video Out
HDMI OUT
COMPONENT VIDEO OUT
576i
576p
576i
576p
576p
576i
720p
720p
576i
Resolution
1080i
1080i
576i
1080p/24 Hz
1080p / 24 Hz
576i
1080p / 50 Hz
1080p / 50 Hz
576i
HDMI OUT connection
yy If you select a resolution that your TV does not
accept, the warning message will appear. After
resolution change, if you cannot see the screen,
please wait 20 seconds and the resolution
will automatically revert back to the previous
resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or 50
Hz depending both on the capability and
preference of the connected TV and based on
the native video frame rate of the content on the
BD-ROM disc.
Blu-ray Disc, DVD video stream could prevent upscaling on analog output.
VIDEO OUT connection
The resolution of the VIDEO OUT jack is always
outputted at 576i resolution.
6
Appendix
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV does
not accept it, the resolution setting is set to
[Auto].
COMPONENT VIDEO OUT
Connection
68 Appendix
Specifications
General
Power requirements
Refer to main label on the rear panel.
Power consumption
Refer to main label on the rear panel.
Dimensions (W x H x D)
Approx. 433.5 x 57 x 281 mm (17 x 2.2 x 11 inches)
Net Weight (Approx.)
3.5 kg (7.7 lbs)
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Inputs/Outputs
VIDEO OUT
COMPONENT VIDEO OUT
1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
(Y) 1.0 V (p-p), 75 Ω, sync negative, RCA jack x 1
(Pb)/(Pr) 0.7 V (p-p), 75 Ω, RCA jack x 2
HDMI OUT (video/audio)
19 pin (Type A, HDMI™ Connector)
ANALOG AUDIO IN
2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) x 1
DIGITAL IN (OPTICAL)
3 V (p-p), Optical jack x 1
PORT. IN
0.5 Vrms (3.5 mm stereo jack)
Tuner
FM Tuning Range
87.5 to 108.0 MHz or 87.50 to 108.00 MHz
Amplifier
6
Power output (4 Ω/ 3 Ω), (RMS), THD 10 %
Appendix
Total
1100 W
Front
180 W x 2
Center
180 W
Rear
180 W x 2
Sub-Woofer
200 W (Passive)
Appendix 69
System
Laser
Semiconductor laser
Wavelength
405 nm / 650 nm
Signal system
Standard PAL/NTSC color TV system
Frequency response
20 Hz to 18 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Harmonic distortion
Less than 0.05 %
Dynamic range
More than 80 dB
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Bus Power Supply (USB)
DC 5 V 0 500 mA
Speakers
Front speaker (Left/ Right)
Type
2 Way 2 speaker
Max. Input power
360 W
Impedance Rated
4Ω
Net Dimensions
(W x H x D)
94 x 211 x 83 mm
(3.7 x 8.3 x 3.3 inches)
Input Power
180 W
Net Weight
0.7 kg (1.5 lbs)
1 Way 1 speaker
Max. Input power
360 W
Impedance Rated
4Ω
Net Dimensions
(W x H x D)
94 x 182 x 83 mm
(3.7 x 7.2 x 3.3 inches)
Input Power
180 W
Net Weight
0.61 kg (1.34 lbs)
2 Way 3 speaker
Max. Input power
360 W
Impedance Rated
4Ω
Net Dimensions
(W x H x D)
327 x 99 x 76 mm
(12.9 x 3.9 x 3.0 inches)
Input Power
180 W
Net Weight
1.21 kg (2.67 lbs)
1 Way 1 speaker
Max. Input power
400 W
Impedance Rated
3Ω
Net Dimensions
(W x H x D)
190 x 385 x 318 mm
(7.5 x 15.2 x 12.5 inches)
Input Power
200 W
Net Weight
5 kg (11 lbs)
Rear speaker (Left/ Right)
Type
Center speaker
Type
Type
yy Design and specifications are subject to change without notice.
Appendix
Subwoofer
6
70 Appendix
Maintenance
Notes on Discs
Handling Discs
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Maintaining the Unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Appendix
71
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a “Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-todate information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
Download PDF

advertising