LG | HLS36W | LG HLS36W Owner’s Manual

ENGLISH
Việt
中文
OWNER’S MANUAL
Speaker Sound Bar
Please read this manual carefully before operating
your set and retain it for future reference.
HLS36W (HLS36W, SHS36-D)
HLS36W-N0_DSGPLLK_ENG_0458.indd 1
2011-08-05 �� 12:08:40
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with
arrowhead symbol within an
equilateral triangle is intended to
alert the user to the presence of
uninsulated dangerous voltage
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
HLS36W-N0_DSGPLLK_ENG_0458.indd 2
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. hen installing the product, ensure
that the plug is easily accessible.
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
2011-08-05 �� 12:08:40
Getting Started
RF Radiation Exposure Statement
This equipment should be installed and operated
with minimum distance 20 cm between the
radiator and your body.
1. D.L.gs 1.8.2003, n. 259, article 104 (activity
subject to general authorization) for outdoor
use and article 105 (free use) for indoor use, in
both cases for private use.
1
Getting Started
Italy Notice
A general authorization is requested for outdoor
use in Italy.
The use of these equipments is regulated by:
3
2. D.M. 28.5.03, for supply to public of RLAN access
to networks and telecom services.
L’uso degli apparati è regolamentato da:
1. D.L.gs 1.8.2003, n. 259, articoli 104 (attività
soggette ad autorizzazione generale) se utilizzati
al di fuori del proprio fondo e 105 (libero uso) se
utilizzati entro il proprio
fondo, in entrambi i casi per uso private.
2. D.M. 28.5.03, per la fornitura al pubblico
dell’accesso R-LAN alle reti e ai servizi di
telecomunicazioni.
Brazil Notice
Este equipamento opera em caráter secundário, isto
é, não tem direito a proteção contra interferência
prejudicial, mesmo de estações do mesmo tipo, e
não pode causar interferência a sistemas operando
em caráter primário.
HLS36W-N0_DSGPLLK_ENG_0458.indd 3
2011-08-05 �� 12:08:40
4
Table of Contents
Table of Contents
1
Getting Started
2
6
6
6
6
7
7
7
7
8
9
9
Safety Information
Unique Features
– Portable In
– Speaker ez (easy) Setup
Accessories
Introduction
– Symbols Used in this Manual
Playable file
– MP3/ WMA music file requirement
Remote control
Front panel
Rear panel
3 Operating
15
15
15
15
15
16
16
16
16
16
17
17
18
18
Basic Operations
– USB Operation
Other Operations
– DOLBY DRC (Dynamic Range
Control)
– AV Sync
– Sleep Timer Setting
– Dimmer
– Turn off the sound temporarily
– Adjust the woofer level settings
– Displaying file and input source
Sound adjustment
– Setting the surround mode
Controlling a TV with the Supplied
Remote Control
– Setting up the remote to control your
TV
2 Connecting
10
12
12
13
13
13
13
13
14
Mounting the main unit on a wall
Setting up
– Pairing wireless subwoofer
Optional Equipment Connection
– AUDIO (PORT. IN) In Connection
– Listening to music from your portable
player
– OPTICAL In connection
– Speaker ez (easy) setup
– USB Playback
HLS36W-N0_DSGPLLK_ENG_0458.indd 4
2011-08-05 �� 12:08:40
Table of Contents
5
4 Troubleshooting
19
Troubleshooting
5 Appendix
20
20
21
22
Maintenance
– Handling the Unit
Trademarks and Licenses
Specifications
1
2
3
4
5
HLS36W-N0_DSGPLLK_ENG_0458.indd 5
2011-08-05 �� 12:08:40
6
Getting Started
Unique Features
1
Portable In
Accessories
Please check and identify the supplied accessories.
Getting Started
Listen to music from your portable device. (MP3,
Notebook, etc)
Speaker ez (easy) Setup
Listen to sounds from TV, DVD or Digital device
with vivid 2.1 or 2.0 ch mode.
Remote control
Batteries
WALL BRACKET
INSTALL GUIDE
Wall bracket
Optical cable
HLS36W-N0_DSGPLLK_ENG_0458.indd 6
2011-08-05 �� 12:08:40
Getting Started
Playable file
Symbols Used in this Manual
MP3/ WMA music file
requirement
,,Note
Indicates special notes and operating features.
,,Tip
Indicates tip and hints for making the task easier.
>>Caution
Indicates cautions for preventing possible damages
from abuse.
HLS36W-N0_DSGPLLK_ENG_0458.indd 7
1
MP3/ WMA file compatibility with this unit is limited
as follows :
yy Sampling frequency : within 32 to 48 kHz (MP3),
within 32 to 48 kHz (WMA)
yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA)
Getting Started
Introduction
7
yy Maximum files : Under 999
yy File extensions : “.mp3”/ “.wma”
2011-08-05 �� 12:08:40
8
Getting Started
Remote control
• • • • • • • • • • a • • • • • • • • • •
1 POWER: Switches the unit ON or OFF.
AV SYNC: Synchronizes the audio and video.
DOLBY DRC: Sets the Dobly DRC.
1
Getting Started
MUTE: Mutes the sound.
• • • • • • • • • • b • • • • • • • • • •
FOLDER: Searches for a folder of MP3/ WMA files.
When a USB containing MP3/ WMA files in several
folders is being played, press FOLDER to select the
folder you want to play.
INPUT: Changes input sources.
OPTICAL: Changes input source to optical directly.
VOLUME: Adjusts speaker volume.
• • • • • • • • • • c • • • • • • • • • •
SOUND EFFECT: Selects a sound effect mode.
WOOFER LEVEL: Sets the sound level of woofer.
REPEAT: Listens to your files repeatedly or
randomly.
C/V: Goes to next or previous file.
Z: Stops playback.
d/M: Starts playback. / Pauses playback.
SLEEP: Sets the system to turn off automatically at
a specified time.
INFO.: Displays the file or input source information.
• • • • • • • • • • d • • • • • • • • • •
TV Control buttons: See page 18
0 to 9 numerical buttons: Selects numbered
numbered files.
Battery Installation
Remove the battery cover on the rear of the
Remote Control, and insert two (size AAA) battery
with and matched correctly.
HLS36W-N0_DSGPLLK_ENG_0458.indd 8
2011-08-05 �� 12:08:41
Getting Started
9
Front panel
B
A
1
F
E
D
C
A Display
D I STOP
B USB Port
E T PLAY / PAUSE
C F FUNCTION
Press it repeatedly to select other function.
F – VOL +
Adjusts speaker volume.
Getting Started
G
G 1 STANDBY/ON
Rear panel
A
B
A PORT. (Portable) IN
HLS36W-N0_DSGPLLK_ENG_0458.indd 9
B OPTICAL IN 1/ 2
2011-08-05 �� 12:08:41
10
Connecting
Mounting the main
unit on a wall
You can mount the main unit on a wall. Prepare screws and brackets.
2. When you mount it on a wall (concrete), use the
wall plugs (Not supplied). You should drill some
holes. A guide sheet (WALL BRACKET INSTALL
GUIDE) is supplied to drill. Use the sheet to
check the point to drill.
Step 2
Preperation
2
Unit
Connecting
Wall bracket
WALL BRACKET
INSTALL GUIDE
1. Match the TV’s BOTTOM EDGE of WALL BRACKET
INSTALL GUIDE with the bottom of TV and
attach to the position.
Step 1
,,Note
Screws and Wall Plugs are not supplied for
mounting the unit. We recommend the Hilti
(HUD-1 6 x 30) for the mounting. Please
purchase it.
TV
HLS36W-N0_DSGPLLK_ENG_0458.indd 10
2011-08-05 �� 12:08:41
Connecting
3. Remove the WALL BRACKET INSTALL GUIDE.
4. Fix it with screws (not supplied) as shown in the
illustration below.
11
5. Hang the main unit onto the bracket as shown
below.
Step 5
Step 4
2
Connecting
,,Note
Detach the unit from the bracket as shown
below.
,,Note
You can arrange power cord cable with the
bracket as shown below.
Power
cord
cable
Power
cord
cable
>>Caution
yy Do not hang onto the installed unit and
avoid any impact to the unit.
yy Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
result in an injury or damage to the product.
yy When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.
HLS36W-N0_DSGPLLK_ENG_0458.indd 11
2011-08-05 �� 12:08:41
12
Connecting
Setting up
Pairing wireless subwoofer
When your connection is not completed, you can
see the red LED on the woofer and woofer is not
made sound. To solve the problem, follow the
below steps.
LED Color
Status
1. Press and hold I STOP button on the unit
and MUTE button on the remote control
simultaneously.
- Displays the “REMATE”.
Blue
The wireless subwoofer is
receiving the signal of the unit.
2. Press PAIRING on back of the woofer.
- The blue LED will flicker
Blue (blink)
The wireless subwoofer is trying
to connect.
Red
The Wireless subwoofer is in
standby mode.
Off (No
display)
The Wireless subwoofer is
turned off.
LED indicator of wireless subwoofer
2
Manually pairing wireless subwoofer
Connecting
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
3. Turn off and on the unit.
- If you see “blue” LED, it’ s successful.
4. If you don’t see “blue” LED, try again Step 1 Step 3.
,,Note
yy If you operate main unit then wireless
subwoofer (rear speakers) sound within a
few seconds in standby mode.
yy Set the distance between this unit and
subwoofer Receiver within 10 m (32 ft.).
yy Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
yy It takes a few seconds (and may take longer)
for the Wireless Transmitter and subwoofer
to communicate with each other.
HLS36W-N0_DSGPLLK_ENG_0458.indd 12
2011-08-05 �� 12:08:41
Connecting
Optional Equipment
Connection
AUDIO (PORT. IN) In
Connection
13
OPTICAL In connection
Connect an optical output of Unit (or Digital Device
etc) to the OPTICAL IN 1/ 2 connector.
OPTICAL IN Connection
2
Connecting
PORT.IN Connection
MP3 player, etc...
To the digital
optical output jack
of your component
Speaker ez (easy) setup
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable player or external devices.
1. Connect the portable player to the AUDIO (PORT. IN) IN connector of the unit.
2. Turn the power on by pressing 1 POWER.
3. Select the PORTABLE function by pressing
INPUT.
Listens to sound from TV or DVD or Digital Device
with 2.1 or 2ch mode.
1. Connect the unit’s OPTICAL IN 1/ 2 jack to jack
on optical out of your TV (or Digital Device etc.).
2. Select the OPTICAL 1/ 2 by using the OPTICAL.
To select the OPTICAL 1/ 2 directly
3. Listen to sound with 2.1 or 2ch speaker.
4. Press OPTICAL to exit from OPTICAL 1/ 2.
Function is retuned to previous one.
4. Turn on the portable player or external device
and start playing it.
HLS36W-N0_DSGPLLK_ENG_0458.indd 13
2011-08-05 �� 12:08:42
14
Connecting
USB Playback
Compatible USB Devices
Insert USB memory device to the USB port on the
front of the unit.
yy MP3 Player : Flash type MP3 player.
USB Connection
evices that support USB2.0 or
yy USB Flash Drive : D
USB1.1.
yy The USB function of this unit does not support
some USB devices.
USB device requirement
2
Connecting
yy Devices which require additional program
installation connected to a computer, are not
supported.
yy Do not extract the USB device while in operation.
yy For a large capacity USB, it may take longer than
a few minutes to be searched.
yy To prevent data loss, back up all data.
Removing the USB Device from the unit.
yy If you use a USB extension cable or USB hub, the
USB device is not recognized.
1. Choose a different function mode or press
I STOP twice in a row.
yy Using NTFS file system is not supported. (Only
FAT(16/32) file system is supported.)
2. Remove the USB device from the unit.
yy This unit is not supported when the total
number of files is 1 000 or more.
yy External HDD, Card readers, Locked devices, or hard type USB devices are not supported.
yy The unit’s USB Port cannot be connected to PC.
The unit can not be used as a storage device.
HLS36W-N0_DSGPLLK_ENG_0458.indd 14
2011-08-05 �� 12:08:42
Operating
15
Basic Operations
Other Operations
USB Operation
DOLBY DRC (Dynamic Range
Control)
1. Connect the USB device to the USB port.
2. Select the USB function by pressing INPUT.
3. Select a file you want to play by pressing C or V.
To
Stop
Do this
Press Z
Playback
Press d/M
Pause
Press d/M
AV Sync
When receiving audio signals from TV, sound and
images may not be matched. In the case, this
function can adjust the delay time.
1. Press AV SYNC.
2. Use C V to scroll up and down through
the delay amount, which you can set at
anything between 0 and 300m/sec.
3
Operating
Skipping to the
next/ previous
file
During playback, press C
or V to go to the next file
or to return to the beginning
of the current file.
Make the sound clear when the volume is turned
down (Dolby Digital only). Set to [DRC ON] by using
DOLBY DRC.
Press C twice briefly to
step back to the previous file.
Playing
repeatedly or
randomly
Press REPEAT on the remote
control repeatedly, the display
change in the following order,
RPT 1 RPT D (DIRECTORY)
RPT ALL RANDOM OFF.
Selecting files
directly
Press 0 to 9 numerical
buttons on the remote
control to go to the desired
file directly.
HLS36W-N0_DSGPLLK_ENG_0458.indd 15
2011-08-05 �� 12:08:42
Operating
16
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after the unit will
turn off.
To check the remaining time, press SLEEP.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
Displaying file and input
source
You can display various information on the USB and
OPTICAL IN 1/ 2 mode by pressing INFO..
USB : MP3/ WMA containing file information
OPTICAL IN 1/ 2 : Audio format, Audio channel
,,Note
You can check the remaining time before the
Unit turns off.
3
Press SLEEP The remaining time appears in the
display window.
Operating
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim off.
Turn off the sound temporarily
Press
MUTE to mute your unit.
You can mute your unit in order, for example, to
answer the telephone, appearing the
in the
display window.
Adjust the woofer level
settings
You can adjust the sound level of woofer.
1. Press WOOFER LEVEL.
2. Press VOLUME -/+ to adjust the sound level of
the woofer.
HLS36W-N0_DSGPLLK_ENG_0458.indd 16
2011-08-05 �� 12:08:42
Operating
Sound adjustment
17
,,Note
Setting the surround mode
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
This system has a number of pre-set surround
sound fields. You can select a desired sound mode
by using SOUND EFFECT.
yy You may need to reset the surround mode,
after switching the input, sometimes even
after the sound file changed.
The displayed items for the equalizer may be
different depending on sound sources and effects.
On Display
NATURAL
You can enjoy comfortable
and natural sound.
You can enjoy the sound
without equalizer effect.
BASS
The BASS is Bass Blast. During
playback, reinforce the treble,
bass and surround sound
effect.
CLRVOICE
The CLRVOICE is Clear Voice.
This program make voice
sound clear, improving the
quality of voice sound. (We
encourage to use this EQ
when you watch the movie of
5.1 channel.)
VIRTUAL
3
Operating
BYPASS
Description
The VIRTUAL is VSM Plus.
You can enjoy more virtual
surround sound.
GAME
The GAME is Game Equalizer.
You can enjoy more virtual
sound while playing video
games.
NIGHT
The NIGHT is Night Mode.
This may be useful when you
want to watch movies at low
volume late at night.
UPSCALER
The UPSCALER is MP3 UpScaling. When listening to
MP3 files or other compressed
music, you can enhance the
sound. This mode is available
only to 2 channel sources.
LOUDNESS
Improves the bass and treble
sound.
HLS36W-N0_DSGPLLK_ENG_0458.indd 17
2011-08-05 �� 12:08:42
18
Operating
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
3
Operating
Button
Operation
1 (TV POWER)
Turn the TV on or off.
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
VOL +/–
Adjust the volume of the
TV.
PR/CH W/S
Scan up or down through
memorized channels.
,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
HLS36W-N0_DSGPLLK_ENG_0458.indd 18
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control. If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button,
and press the manufacturer code for your
TV with the numerical buttons (see the table
below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
2011-08-05 �� 12:08:42
Troubleshooting
19
Troubleshooting
PROBLEM
No Power
CORRECTION
Plug in the power cord.
Check the condition by operating other electronic devices.
Press FUNCTION and check the selected function.
No sound
The power cord of woofer is not connected. Plug the power cord into the wall outlet
securely.
Pairing between the unit and woofer gets disconnected. Connect the unit and woofer.
(Refer to the page 12)
The remote control is too far from the unit.
The remote
control does
not work
properly.
Operate the remote control within about 23 ft (7m).
There is an obstacle in the path of the remote control and the unit.
Remove the obstacle.
The battery in the remote control is exhausted.
Replace the battery with new one.
4
Troubleshooting
HLS36W-N0_DSGPLLK_ENG_0458.indd 19
2011-08-05 �� 12:08:42
20 Appendix
Maintenance
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
5
Appendix
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
HLS36W-N0_DSGPLLK_ENG_0458.indd 20
2011-08-05 �� 12:08:42
Appendix
21
Trademarks and
Licenses
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are registered trademarks & DTS Digital Surround and
the DTS logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
5
Appendix
HLS36W-N0_DSGPLLK_ENG_0458.indd 21
2011-08-05 �� 12:08:42
22 Appendix
Specifications
General
Power requirements
Refer to main label.
Power consumption
Refer to main label.
Dimensions (W x H x D)
1 000 x 80 x 50 mm without foot
Net Weight (Approx.)
2.3 kg
Operating temperature
41 °F to 95 °F (5 °C to 35 °C)
Operating humidity
5 % to 90 %
Bus Power Supply (USB)
DC 5 V 0 500 mA
Inputs
DIGITAL IN (OPTICAL IN)
3 V (p-p), Optical jack x 2
PORT. IN
0.5Vrms (3.5 mm stereo jack)
Amplifier
Stereo mode
70 W + 70 W (4 Ω at 1 kHz)
Subwoofer
140 W (3 Ω at 60 Hz)
5
Wireless subwoofer
Appendix
Power requirements
Refer to main label on the Subwoofer.
Power consumption
Refer to main label on the Subwoofer.
Type
1 Way 1 Speaker
Impedance Rated
3Ω
Input Power
140 W
Max. Input Power
280 W
Net Dimensions (W x H x D)
196 X 392 X 317 mm
Net Weight
6.88 kg
Designs and specifications are subject to change without prior notice.
HLS36W-N0_DSGPLLK_ENG_0458.indd 22
2011-08-05 �� 12:08:42
HLS36W-N0_DSGPLLK_ENG_0458.indd 23
2011-08-05 �� 12:08:42
Download PDF