LG | LAB550H | LG LAB550H Owner’s Manual

OWNER’S MANUAL
SoundPlate
Please read this manual carefully before operating
your set and retain it for future reference.
LAB550H
Getting Started
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
To prevent direct exposure to laser beam, do not
try to open the enclosure.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
Most appliances recommend they be placed upon
a dedicated circuit;
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not use high voltage products
around this product. (ex. Electrical swatter) This
product may malfunction due to electrical shock.
CAUTION concerning the Power Cord
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page
of this owner’s manual to be certain of current
requirements. Do not overload wall outlets.
Overloaded wall outlets, loose or damaged wall
outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. The
Power Plug is the disconnecting device. In case of
an emergency, the Power Plug must remain readily
accessible.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
4
Getting Started
NOTICE: For Product Identification and
Compliance/Safety labeling information please
refer to Main Label on the bottom of Unit.
1
This device is equipped with a portable battery or
accumulator.
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery should not be exposed
to excessive heat such as sunshine, fire or the like.
Getting Started
Notes on copyrights
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected content. To
obtain additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Rovi Corporation.
Reverse engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
Important Notice for TV colour
system
The colour system of this player differs according to
currently playing discs.
For example, when the player plays the disc
recorded in the NTSC colour system, the image is
output as an NTSC signal.
Only the multi system colour TV can receive all
signals output from the player.
yy If you have a PAL colour system TV, you will see
just distorted images when using discs or video
contents recorded in NTSC.
yy The multi system colour TV changes the colour
system automatically according to input signals.
In case that the colour system is not changed
automatically, turn it off and then on to see
normal images on screen.
yy Even if the disc recorded in NTSC colour system
are well displayed on your TV, these may not be
recorded correctly on your recorder.
1
Getting Started
yy Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
content. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
5
6
Table of Contents
Table of Contents
1
Getting Started
3
Safety Information
8Introduction
8
– Playable discs and symbols used in
this manual
9
– About the “7” symbol display
9
– Regional code
9
– System Select
10 Remote Control
11 Front Panel
11 Rear Panel
12 Setting up the unit
2Connecting
15
16
16
16
18
18
18
19
20
20
21
22
22
Connecting to your TV
– What is SIMPLINK?
– ARC (Audio Return Channel) function
– Resolution setting
Connections with external device
– OPTICAL IN connection
– HDMI IN connection
– PORTABLE IN connection
Connecting to your Home Network
– Wired network connection
– Wired network setup
– Wireless network connection
– Wireless network setup
3 System Setting
25 Initial Setup
26Settings
26 – Adjust the setup settings
27 – [NETWORK] menu
28 – [DISPLAY] menu
29 – [LANGUAGE] menu
30 – [AUDIO] menu
31 – [LOCK] menu
32 – [OTHERS] menu
4Operating
34
35
35
35
35
36
37
38
39
39
39
39
40
40
41
41
41
41
42
42
43
43
44
45
45
45
45
46
46
46
46
47
47
48
48
48
49
49
49
50
50
50
Sound Effect
Home Menu Display
– Using [HOME] menu
Playing the Linked Devices
– Playing a disc
– Playing a file on disc/USB device
– Playing a file on Android device
– Playing a file on a network server
Using Home Network Server for PC
– About SmartShare PC Software
– Downloading SmartShare PC
Software
– Installing SmartShare PC Software
– Sharing files and folders
– System requirements
General Playback
– Basic operations for video and audio
content
– Basic operations for photo content
– Using the disc menu
– Resume playback
– Last scene memory
On-Screen Display
– To control video playback
– To control photo view
Advanced Playback
– Repeat playback
– Repeating a specific portion
– Playing from selected time
– Selecting a subtitle language
– Hearing a different audio
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing subtitle Code Page
– Changing the Picture Mode
– Viewing content information
– Changing content list view
– Selecting a subtitle file
– Listening to music during slide show
Advanced Features
– Enjoying BD-Live™
– LG AV Remote
– Private Sound Mode
Using the Premium
Table of Contents
51
Enjoying with LG Multi-room Audio (LG
Music Flow)
52 Using Bluetooth® technology
52 – Listening to music stored on the
Bluetooth® devices
54 LG Sound Sync
73
7
Important Information relating to Network
Services
5Troubleshooting
55Troubleshooting
55 – General
56 – Network
57 – Picture
57 – Sound
57 – Customer Support
57 – Open Source Software Notice
6Appendix
58 Controlling a TV with the Supplied
Remote Control
58 – Setting up the remote to control your
TV
59 Network Software Update
59 – Network update notification
59 – Software update
61 Additional Information
61 – File requirement
62 – AVCHD (Advanced Video Codec High
Definition)
63 – About DLNA
63 – Certain system requirements
63 – Compatibility notes
64 Audio Output Specifications
65 Area Code List
66 Language Code List
67 Trademarks and Licenses
70Specifications
72Maintenance
72 – Handling the unit
72 – Notes on discs
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
1
2
3
4
5
6
8
Getting Started
Introduction
1
Playable discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Blu-ray
y
u
i
r
DVD-ROM
Description
yy Discs such as movies that can be purchased or
rented.
yy BD-R/RE discs that are recorded in BDAV format.
yy BD-R/RE discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Movie mode and finalized only
yy Supports the dual layer disc also
DVD-R
DVD-RW
DVD+R
DVD+RW
(12 cm)
DVD-RW (VR)
(12 cm)
Audio CD
(12 cm)
CD-R/RW
(12 cm)
Note
–
Caution
–
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
r
VR mode and finalized only
t
Audio CD
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible damages
from abuse.
Getting Started
,,Note
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
About the “7” symbol display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
Regional code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or “ALL”.
System Select
Press B (OPEN/CLOSE) when a disc is inserted,
and do not remove the disc. Press and hold M
(PAUSE) for more than five seconds while [OPEN] is
displayed in the display window.
1
Getting Started
yy Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the
unit.
9
10
Getting Started
Remote Control
1
Getting Started
• • • • • • a • • • • • • • • • • • • c • • • • • •
1 (POWER): Switches the player
ON or OFF.
HOME ( ): Displays or exits the
[Home].
B (OPEN/CLOSE): Ejects a disc.
(Night mode): Set Night
mode to On to reduce the sound
intensity and improve fineness
and softness.
P(FUNCTION): Changes input
mode.
0-9 numerical buttons: Selects
numbered options in a menu.
CLEAR: Removes a number when
setting the password or network
connection.
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • b • • • • • •
c/v (SCAN): Searches
backward or forward.
C/V (SKIP): Goes to the
next or previous chapter / track /
file.
Z (STOP): Stops playback.
z (PLAY): Starts playback.
M (PAUSE): Pauses playback.
SPEAKER LEVEL: Sets the sound
level of desired speaker.
SOUND EFFECT: Selects a sound
effect mode.
Battery Installation
INFO/MENU (m): Displays or
exits On-Screen Display.
Direction buttons (W/S/
A/D): Selects an option in the
menu.
ENTER (b): Acknowledges menu
selection.
BACK ( ): Exits the menu or
returns to the previous screen.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s popup
menu, if available.
DISC MENU: Accesses menu on a
disc.
• • • • • • d • • • • • •
Colored (R, G, Y, B) buttons:
Use to navigate BD-ROM menus.
They are also used as shortcut
buttons for specific menus.
VOL +/-: Adjusts speaker volume.
SUBTITLE: Selects a subtitle
language.
OPTICAL/TV SOUND: Changes
input mode to optical directly.
AUDIO: Selects an audio language
or audio channel.
i(MUTE): Mute the unit.
SLEEP: Sets a certain period of
time after which the unit will
switch to off.
? : Marked button is not available.
• • • • • • e • • • • • •
Remove the battery cover on the
rear of the Remote Control, and
insert two R03 (size AAA) batteries
with 4 and 5 matched correctly.
TV Control Buttons: See page
58.
Getting Started
11
Front Panel
a
1
Getting Started
b
c
aOperation buttons
1/! (Power)
F (Function)
Selects the function and input source.
p/o (Volume)
T (Play / Pause)
I (Stop)
R (Open / Close)
d
bDisc Slot
cDisplay window
dRemote sensor
Rear Panel
a
b
c
d
e
aSpeaker Duct
Holes for plentiful bass sound on speaker
cabinet.
bUSB port
cPORTABLE IN : Portable input
f
g
h
dOPTICAL IN : Optical input
eLAN port
fHDMI IN 1/2 : HDMI input
gHDMI OUT (TV ARC) : HDMI output
hAC IN
12
Getting Started
Setting up the unit
1
This unit is designed to be positioned under your
TV.
Getting Started
Before setting up this system with your TV, make
sure your TV’s specifications.
yy Weight
>>Caution
yy Be careful not to make scratches on the
surface of the Unit /Sub-Woofer when
installing or moving them.
yy Do not try to set up this unit alone. It may
need at least 2 persons to lift your TV.
Otherwise it may result in a personal injury
and/or property damages.
yy Do not connect a CRT type TV to this unit.
Because this unit contains magnetic parts,
color irregularity may occur on the TV
screen.
yy Do not place any other objects except a TV
or a monitor on the unit.
yy The unit must be set up on a stable and
horizontal surface.
yy Do not place any other objects below the
unit and the supporting furniture when you
set up the unit.
Max. 38 kg
,,Recommendation
It is recommended to set up the unit on a
sufficiently firm and horizontal surface.
1. Place the unit at the location where you want to
place your TV.
yy Size of the base
Max. 270 mm
Max. 680 mm
Getting Started
2. Connect all the cables of external devices you
want to use such as TV, Blu-ray disc player or
DVD player. Connect the player’s LAN port to
LAN or Ethernet cable. You should also connect
the power cord supplied as an accessory.
13
,,Recommendation
You can connect a USB in a way that is easier
and more convenient by using a USB extension
cable. Purchase the cable from the nearest LG
Electronic Service point.
Because it is difficult to make a connection
after installing this unit, you should connect
the cables before installation.
TV
3. Place your TV on the center of the unit.
>>Caution
yy Be careful not to hide control buttons on
the top of this unit when you put your TV on
the unit.
Blu-ray disc
player, DVD
player, etc.
1
Getting Started
>>Caution
yy Position the base of your TV and the edge of
the unit as described below.
10 mm
20 mm
Available zone
(Top of the unit)
30 mm
Power cord
For more information of connections and
operations, refer to the pages below.
(O) Optical : See page 18.
(H) HDMI : See page 15 and page 18.
(P) Portable : See page 19.
(L) LAN : See page 20.
4. Plug in the power cord of the unit.
10 mm
14
Getting Started
>>Caution
1
yy Do not place your TV on the edge of this
unit. Otherwise it may result in a personal
injury and/or property damages.
How to Affix the Ferrite Core
(Optional)
You may need to attach Ferrite core in order to
reduce or eliminate any electrical interference.
Getting Started
1.Open
yy If your TV is over recommended weight
(max 38 kg) or has a Base larger in area than
the Unit do NOT place TV on the Unit.
2. Wind (Once)
-- In this case, it is recommended to place this
system in another location such as on the
shelf under the TV.
3.Close
Connecting
Connecting to your TV
If you have an HDMI TV or monitor, you can
connect it to this player using an HDMI cable (Type
A, High Speed HDMI™ Cable). Connect the HDMI
jack on the player to the HDMI jack on an HDMI
compatible TV or monitor.
15
Additional information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it on for around 30 seconds,
then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
HDMI cable
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-- The picture will not be displayed properly
with non-HDCP device.
Set the TV’s source to HDMI (refer to TV’s owner’s
manual).
,,Note
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution setting” on page 16)
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (page 29).
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
yy When the HDMI connection with HDCP is
not verified, the TV screen is changed to a
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m (15 ft.)).
2
Connecting
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
16
Connecting
What is SIMPLINK?
Resolution setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution
using [Settings] menu.
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
2
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Connecting
Refer to the TV owner’s manual for the details of
SIMPLINK function.
1. Press HOME ( ).
2. Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
3. Use W/S to select [DISPLAY] option then
press D to move to the second level.
4. Use W/S to select the [Resolution] option
then press ENTER (b) to move to the third level.
LG TV’s with SIMPLINK function has the logo as
shown above.
,,Note
yy Depending on the disc type or playing
status, some SIMPLINK operation may differ
from your purpose or not work.
yy The HDMI IN jacks do not support SIMPLINK.
ARC (Audio Return Channel)
function
The ARC function enables an HDMI capable TV to
send the audio stream to HDMI OUT of this player.
To use this function:
-- Your TV must support the HDMI-CEC and ARC
function and the HDMI-CEC and ARC must be
set to On.
-- The setting method of HDMI-CEC and ARC may
differ depending on the TV. For details about
ARC function, refer to your TV manual.
-- You must use the HDMI cable (Type A, High
Speed HDMI™ cable with Ethernet).
-- You must connect with the HDMI IN that
supports the ARC function using the HDMI OUT
on this player.
-- You can connect only one Home Theater to TV
compatible with ARC.
,,Note
To activate [SIMPLINK / ARC] function, set this
option to [On]. (page 33)
5.Use W/S to select the desired resolution then
press ENTER (b) to confirm your selection.
Connecting
17
,,Note
yy If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
1. Press HOME ( ) to disappear the HOME
menu.
2.Press Z (STOP) for more than 5 seconds.
yy If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
2
Connecting
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
18
Connecting
Connections with
external device
OPTICAL IN connection
2
You can enjoy the sound from your component
with a digital optical connection through the
speakers of this system.
HDMI IN connection
You can enjoy the pictures and sound from your
component through this connection.
Connect the HDMI OUT jack of your component
into the HDMI IN 1 or 2 jack on this unit. And then
select the [HDMI IN 1/2] option by pressing
P FUNCTION.
You can also use the F (Function) button on the
front panel to select the input mode.
Connecting
Connect the optical output jack of your component
into the OPT. IN (OPTICAL IN) jack on the unit. And
then select the [OPTICAL] option by pressing
P FUNCTION. Or press OPTICAL/TV SOUND to
select directly.
You can also use the F (Function) button on the
front panel to select the input mode.
Optical cable
To the HDMI OUT jack of your component
(set-top box, digital satellite receiver, video
game machine, etc.)
,,Note
yy You cannot change the video resolution in
the HDMI IN 1/2 mode. Change the video
resolution of the connected component.
yy If the video output signal is abnormal when
your personal computer is connected to
HDMI IN 1/2 jack, change the resolution
of your personal computer to 576p, 720p,
1080i or 1080p.
yy The player sends audio from the HDMI
inputs to both the HDMI output and to the
unit’s speakers.
Connecting
19
PORTABLE IN connection
2
Connecting
Listening to music from your
portable player
The unit can be used to play the music from many
types of portable players or external devices.
1. Connect the portable player to the PORTABLE IN
connector of the unit by using a 3.5 mm stereo
cable.
2. Turn the power on by pressing 1 (Power).
3. Select the PORTABLE function by pressing
P FUNCTION on the remote control or F on
the unit until the function is selected.
4. Turn on the portable player or external device
and start playing it.
20 Connecting
Connecting to your
Home Network
2
Connecting
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel or
the internal wireless module.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and online
content services.
Broadband
service
Router
Wired network connection
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
yy If you want to access content from DLNAcompatible digital media servers, this player
must be connected to the same local area
network with them via a router.
yy To set your PC as a DLNA-compatible digital
media server, install the SmartShare PC
Software on your PC. (page 39)
DLNA certified servers
Connecting
Wired network setup
Advanced Setting
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
If you want to set the network settings manually,
use W/S to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
21
1. Use W/S to select [Wired] and press ENTER
(b).
2
Preparation
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
2.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/D and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
3. Select [Next] and press ENTER (b) to apply
network settings.
Network connection status is displayed on the
screen.
4. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
Connecting
Before setting the wired network, you need to
connect the broadband internet to your home
network.
22 Connecting
Wireless network connection
Another connection option is to use an Access Point
or a wireless router. The network configuration and
connection method may vary depending on the
equipment in use and the network environment.
Preparation
Before setting the wireless network, you need
to:
-- connect the broadband internet to the
wireless home network.
-- set the access point or wireless router.
-- note the SSID and security code of the
network.
2
Connecting
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
Wireless
Communication
DLNA certified servers
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Access Point or
Wireless Router
Broadband
service
If wired network is not connected to the unit, all
available networks are displayed on the screen.
3.Use W/S to select a desired SSID of wireless
network and press ENTER (b).
Refer to the setup instructions supplied with
your access point or wireless router for detailed
connection steps and network settings.
For best performance, a direct wired connection
from this player to your home network’s router or
cable/DSL modem is always the best option.
If you do chose to use the wireless option, note that
performance can sometimes be affected by other
electronic devices in the home.
Wireless network setup
For the wireless network connection, the player
needs to be set up for network communication.
This adjustment can be done from the [Settings]
menu. Adjust the [NETWORK] setting as follow.
Setting up the access point or the wireless router
is required before connecting the player to the
network.
If you have security on your access point, you
need to input the security code as necessary.
,,Note
If you use other characters than the english
alphabet or digits for the SSID name of your
access point or wireless router, it may be
displayed differently.
Connecting 23
Advanced Setting
If you want to set the network settings manually,
use W/S to select [Advanced Setting] on the
[Network Setting] menu and press ENTER (b).
1. Use W/S to select [Wireless] and press ENTER
(b).
,,Note
yy WEP security mode generally have 4 keys
available on an access point setting. If your
access point or wireless router use WEP
security, enter the security code of the key
“No.1” to connect on your home network.
4.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using W/S/
A/D and numerical buttons. If you make a
mistake while entering a number, press CLEAR
to clear the highlighted part.
5. Select [Next] and press ENTER (b) to apply
network settings.
[AP List] - Scans all available access points or
wireless routers within range and display them
as a list.
[Network name (SSID)] – Your access point
may not be broadcasting its network name
(SSID). Check your access point settings through
your computer and either set your access
point to broadcast SSID, or manually enter the
network name in [Network name(SSID)].
[PBC] – If your access point or wireless
router that supports the PBC (Push Button
Configuration) method, select this option and
press the Push Button on your access point
within 120 counts. You do not need to know the
network name (SSID) and security code of your
access point.
[PIN] – If your access point supports the PIN
Code configuration method based on WPS(WiFi Protected Setup), select this option and
note the code number on the screen. And
then, enter the PIN number on a setting menu
of your access point to connect. Refer to the
documentation for your network device.
2. Follow the instructions of each connection
method on the screen.
Network connection status is displayed on the
screen.
6. Select [OK] and press ENTER (b) to complete
the network connection.
,,Note
To use PBC and PIN network connection,
security mode of your access point must be
set to OPEN or AES.
Connecting
yy An Access Point is a device that allows you
to connect to your home network wirelessly.
2
24 Connecting
Notes on network connection
yy Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
yy Some internet content may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet content may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
yy The wireless network operate at 2.4 GHz
radio frequencies that are also used by other
household devices such as cordless telephone,
Bluetooth® devices, microwave oven, and can be
affected by interference from them.
yy Turn off all unused network equipment in
your local home network. Some devices may
generate network traffic.
yy For the purpose of the better transmission,
placing the player from the access point as close
as possible.
yy In some instances, placing the access point or
wireless router at least 0.45 m (1.5 ft.) above the
floor may improve the reception.
yy Move closer to the access point if possible or reorient the player so there is nothing between it
and the access point.
yy The reception quality over wireless depends on
many factors such as type of the access point,
distance between the player and access point,
and the location of the player.
yy Set your access point or wireless router to
Infrastructure mode. Ad-hoc mode is not
supported.
System Setting 25
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
5.Use W/S/A/D to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
1.Press 1 (POWER).
The initial setup wizard appears on the screen.
2.Use W/S/A/D to select a display language
and press ENTER (b).
6. Select [Next] and press ENTER (b) to apply
network settings.
3
Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
Network connection status is displayed on the
screen.
For details on network settings, refer to
“Connecting to your Home Network” on page
20.
7. Select [Next] and press ENTER (b).
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use W/S to select [Wired Network]
or desired SSID of wireless network and press
ENTER (b).
If you have security on your access point, you
need to input the security code as necessary.
System Setting
3. After checking the Terms of Service, select
[Agree] to use the Premium Service and SW
Updates.
26 System Setting
8. You can listen to TV sound through this unit’s
speaker automatically when TV is turned on.
Settings
Adjust the setup settings
You can change the settings of the player in the
[Settings] menu.
1. Press HOME ( ).
Press W to move and press A/D to select [On]
or [Off ]. Select [Next] and press ENTER (b).
9. Check all the settings that you have set in the
previous steps.
3
System Setting
2.Use A/D to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use W/S/A/D to
select 1 and press ENTER (b).
10.Displays private sound mode guide. Press ENTER
(b).
3.Use W/S to select the first setup option, and
press D to move to the second level.
11.Displays the guide to enjoy online contents
using LG AV Remote. Press ENTER (b).
4.Use W/S to select a second setup option, and
press ENTER (b) to move to the third level.
5.Use W/S to select a desired setting, and press
ENTER (b) to confirm your selection.
System Setting 27
[NETWORK] menu
Smart Service Setting
The [NETWORK] settings are needed to use the
software update, BD-Live and online content
services.
[Country Setting]
Connection Setting
[Initialize]
If your home network environment is ready to
connect the player, the player needs to be set the
wired or wireless network connection for network
communication. (See “Connecting to your Home
Network” on page 20.)
Depending on the region, [Initialize] function
may not be available.
Connection Status
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
Internet access is permitted for all BD-Live
content.
[Partially permitted]
Internet access is permitted only for BD-Live
content which have content owner certificates.
Internet access and AACS Online functions are
prohibited for all BD-Live content without a
certificate.
[Prohibited]
Internet access is prohibited for all BD-Live
content.
Device Name
You can make a network name using virtual
keyboard. This player will be recognised by the
name you are entering on your home network.
Network Play
This function allows you to control the playback
of media streamed from DLNA media server by a
DLNA certified smartphone. Most DLNA certified
smartphone has a function to control the playback
media on your home network. Set this option to
[On] for allowing your smartphone to control this
unit. Refer to instructions of your DLNA certified
smartphone or the application for more detailed
information.
,,Note
yy This unit and the DLNA Certified
Smartphone must be connected to the
same network.
yy To use the [Network Play] function using a
DLNA certified smartphone, press HOME
( ) to display the home menu before
connecting to this unit.
yy While controlling the unit using the
[Network Play] function, the remote control
may not work.
yy Available file formats described on page
61 are not always supported on [Network
Play] function.
3
System Setting
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
Select your area for displaying proper online
content service.
28 System Setting
[DISPLAY] menu
Resolution
TV Aspect Ratio
Sets the output resolution of the HDMI video signal.
Refer to page 16 for details about the resolution
setting.
Select a TV aspect ratio option according to your TV
type.
3
[Auto]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Pan Scan]
[576p]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[720p]
[4:3 Letter Box]
System Setting
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
Outputs 576 lines of progressive video.
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
,,Note
yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
System Setting 29
HDMI Color Setting
[LANGUAGE] menu
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
Display Menu
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display
device.
Home Menu Guide
Disc Menu / Disc Audio /
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
66.
[Off] (Disc Subtitle only)
Turn off Subtitle.
,,Note
Depending on the disc, your language setting
may not work.
3
System Setting
This function allows you to display or delete the
guide bubble on the [HOME] menu. Set this option
to [On] for displaying guide.
Select a language for the [Settings] menu and onscreen display.
30 System Setting
[AUDIO] menu
DRC (Dynamic Range Control)
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
,,Note
Since many factors affect the type of audio
output, see “Audio Output Specifications” on
page 64 for details.
Digital Output
[Auto]
3
System Setting
Select if you connect this unit’s HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
[PCM]
Select if you connect this unit’s HDMI OUT jack
to a device with digital decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT jack
to a device with DTS decoder.
,,Note
yy When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [Auto]).
yy This setting is not available on the input
signal from an external device.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Off]
Turns off this function.
HD AV Sync
Sometimes Digital TV encounters a delay between
picture and sound. If this happens you can
compensate by setting a delay on the sound so
that it effectively ‘waits’ for the picture to arrive: this
is called HD AV Sync. Use A D to scroll up and
down through the delay amount, which you can
set at anything between 0 and 300 ms.
Auto Volume
With Auto Volume function on, the unit
automatically adjusts the outputted volume level to
make it raised or lowered if the sound is too loud or
small. So you can enjoy the sound at comfortable
level not too loud or small.
System Setting
[LOCK] menu
DVD Rating
The [LOCK] settings affect only Blu-ray Disc and
DVD playback.
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
If you forget your password
If you forget your password, you can clear it using
the following steps:
1. Remove any disc that might be in the player.
2. Highlight [Password] option in the [Settings]
menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
,,Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
[255]
All BD-ROM can be played.
[0-254]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
The [Blu-ray Disc Rating] will be applied only
for the Blu-ray disc that contains the Advanced
Rating Control.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 65.
3
System Setting
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
31
32 System Setting
[OTHERS] menu
TV Sound Connecting
Quick Start
You can listen to TV sound through this unit’s
speaker automatically when TV is turned on.
This player can stay in standby mode with low
power consumption, so that the player can
instantly boot without delay when you turn on this
unit. Set this option to [On] for activating [Quick
Start] function.
,,Note
3
System Setting
yy If [Quick Start] option is set to [On] and an
AC power is accidently re-connected to
the player by power failure etc., the player
automatically boots itself to be the standby
status. Before operating the player, wait for a
while until the player is in standby status.
yy When [Quick Start] is set to [On], power
consumption will be higher than when
[Quick Start] is set to [Off ].
Auto Power Off
The screen saver appears when you leave the
player in Stop mode for about 5 minutes. If you
set this option to [On], the unit automatically
turns off within 15 minutes since the Screen Saver
is displayed. Set this option to [Off ] to leave the
screen saver until the unit is operated by the user.
,,Note
When you set [Auto Power Off ] function in
setting menu on, this unit will be off itself to
save electronic consumption in the case main
unit is not connected to external device and is
not used for 20 minutes.
So does this unit after six hours since Main unit
has been connected to other device using
analog input.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit.
Press W to move and press A/D to select [On] or
[Off ]. Select [OK] and press ENTER (b).
,,Note
When [TV Sound Connecting] and [Quick
Start] functions are on and this unit is turned
off, if a previously paired Bluetooth® device
tries to pair with this unit, this unit turns on
automatically.
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
Initializes the BD-Live content from the
connected USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the online services and
network settings again.
System Setting 33
Software
[Information]
Displays the current software version.
Terms of Service
Privacy Policy for Blu-ray Disc™ Player is displayed.
To use the Premium Service and SW Updates, select
[Agree].
[OSS Notice]
LGE Open Source Software Notice is displayed.
[Update]
You can update the software by connecting
the unit directly to the software update server
(page 59).
SIMPLINK / ARC
-- The SIMPLINK function allows you to control this
unit with LG TV’s remote control.
3
-- The ARC function enables an HDMI capable TV
to send the audio stream to HDMI OUT of this
player.
System Setting
Set this option to [On] for activating [SIMPLINK /
ARC] function. (page 16)
34 Operating
Sound Effect
You can select a suitable sound mode. Press SOUND
EFFECT repeatedly until the desired mode appears
on the front panel display or the TV screen. The
displayed items for the equalizer maybe different
depending on sound sources and effects.
Setting the [User EQ]
You can adjust the sound by raising or lowering the
level of specific frequency. Press USER EQ.
[Standard]: You can enjoy the sound without
equalizer effect.
[Music]: You can enjoy comfortable and natural
sound.
[Cinema]: You can enjoy more immersive and
cinematic surround sound.
1.Use W/S to select the desired frequency.
[Flat]: Provides balanced sound.
Select [Cancel] option then press ENTER (b) to
cancel the setting.
Select [Reset] option then press ENTER (b) to reset
the all adjustments.
[Boost]: Boosts the mid-range for sound
reinforcement.
[Treble / Bass]: Reinforces the treble and bass.
4
[User EQ]: You can adjust the sound by raising or
lowering the level of specific frequency.
Operating
,,Note
yy In some of surround modes, some speakers,
there’s no sound or low sound. It depends
on the mode of surround and the source of
audio, it is not defective.
yy You may need to reset the surround mode,
after switching the input, sometimes even
after the sound file changed.
2.Use A/D to select the desired level.
Operating 35
Home Menu Display
Playing the Linked
Devices
Using [HOME] menu
The home menu appears when you press HOME
( ). Use W/S/A/D to select a category and
press ENTER (b).
Playing a disc
erot
1. Insert a disc in the disc slot.
For most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
2. Press HOME ( ).
3. Select [Movie] or [Music], and select disc icon.
,,Note
a [Movie] - Plays video content.
b [Photo] - Plays photo content.
d [Premium] - Displays the Premium home
screen. (page 50)
e [Input] - Changes input mode.
f [Settings] - Adjusts the system settings.
yy Depending on the BD-ROM title, a USB
device connection may be needed for
proper playback.
yy This player does not support DVD-VR
formatted disc.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit does not
support these kinds of discs.
4
Operating
c [Music] - Plays audio content.
yy Playback functions described in this manual
are not always available in every file and/
or media. Some functions can be restricted
dependent upon many factors.
36 Operating
Playing a file on disc/USB
device
yui
This player can play video, audio and photo files
contained in the disc or USB device.
1. Insert a data disc in the disc slot or connect a
USB device to the unit.
a Displays all linked device.
b Displays video, photo or audio content.
c Displays the file or folder on linked device.
4
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Operating
When you connect the USB device on the HOME
menu, the player plays an audio file contained on
the USB storage device automatically. If the USB
storage device contains various types of files, a
menu for the file type selection will appear.
File loading may takes a few minutes depending on
the number and content of the files stored on the
USB storage device. Press ENTER (b) while [Cancel]
is selected to stop loading.
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4. Select Disc or USB and press ENTER (b).
Operating 37
Notes on USB device
yy This player supports USB flash drive/external
HDD formatted in FAT32 and NTFS when
accessing files (music, photo, movie). However,
for BD-Live and Audio CD recording, use the USB
flash drive / external HDD formatted in FAT32.
yy This unit can support up to 4 partitions of the
USB device.
yy Do not extract the USB device during operation
(play, etc.).
Playing a file on Android
device
yui
This player can play video, audio and photo files
contained in the Android device.
1. Connect the android device to the unit with
USB cable. Make sure that MTP is activated on
Android device.
yy An USB device which requires additional
program installation when you have connected
it to a computer, is not supported.
yy USB device: USB device that supports USB1.1
and USB2.0.
yy Video, audio and photo files can be played.
For details of playing each file, refer to relevant
pages.
yy Regular back up is recommended to prevent
data loss.
yy Some USB device may not work with this unit.
yy Some digital cameras and mobile phones are
not supported.
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
4. Select [MTP] using A/D and press ENTER (b).
yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
File loading may takes a few minutes depending on
the number and content of the files stored on the
Android device.
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Operating
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
4
38 Operating
Notes on Connecting Android device
yy This unit can support only MTP (Media Transfer
Protocol) Android (4.0 or later is recommended)
devices.
yy Do not extract the Android device during
operation (play, etc.).
yy Video, audio and photo files can be played.
For details of playing each file, refer to relevant
pages.
yy Regular back up is recommended to prevent
data loss.
yy If you use an USB extension cable, USB HUB or
USB Multi-reader, the Android device may not be
recognized.
Playing a file on a network
server
yui
This player can play video, audio and photo files
located in a DLNA-compatible digital media server
through your home network.
1. Check the network connection and settings
(page 20).
2. Press HOME ( ).
3. Select [Movie], [Photo] or [Music] using A/D,
and press S.
yy Some Android devices may not work with this
unit.
4
yy When you use MTP, playing some music, photo,
movie, or subtitle files may not work depending
on the Android device.
Operating
4. Select DLNA media server in the category using
A/D and press ENTER (b).
5. Select a file using W/S/A/D, and press
d(PLAY) or ENTER (b) to play the file.
Operating 39
,,Note
yy The file requirements are described on page
61.
yy The thumbnail of the unplayable files can
be displayed, but those cannot be played
on this player.
yy The subtitle file name and video file name
have to be the same and located at the
same folder.
yy The playback and operating quality may be
affected by your home network condition.
yy You may experience connection problems
depending on your server’s environment.
yy To set your PC as a DLNA-compatible digital
media server, install the SmartShare PC
Software on your PC. (page 39)
Using Home Network
Server for PC
Before connecting to PC to play a file, SmartShare
PC software (DLNA) should be installed on your PC.
About SmartShare PC
Software
SmartShare PC Software is for sharing video, audio
and photo files stored on your computer to this
unit as a digital media server.
Downloading SmartShare PC
Software
,,Note
1. Start up your computer, visit http://www.lg.com.
If necessary, select your region.
2. Click support tab.
3. Fill your model name on the cover of owner’s
manual in search bar.
4. Find and download the “SmartShare PC
Software” file.
Installing SmartShare PC
Software
1. Before installation, close all running programs
including firewall and Anti-Virus programs.
2. Unzip and double-click “Setup.exe” to install
SmartShare PC Software. The installation is
prepared and the installation wizard appears.
3. Follow the directions of the installation wizard
displayed on the screen.
4. Click the [Exit] button to complete the
installation.
4
Operating
If the SmartShare PC Software disc is supplied,
you can install SmartShare PC Software on
your PC by the disc.
40 Operating
,,Note
yy SmartShare PC software is not supported
with Mac OS.
Minimum System
yy The SmartShare PC software is a customized
software edition only for sharing files and
folders to this player.
yy CPU : Intel® 2.0 GHz or AMD Sempron™ 2000+
processors
yy This manual explains operations with the
English version of SmartShare PC software
as examples. Follow the explanation
referring to the actual operations of your
language version.
yy Graphics card : 64 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
Sharing files and folders
4
System requirements
yy Memory : 1 GB of free RAM
yy Free Disk Space : 200 MB
yy Windows® XP (Service Pack 2 or higher),
Windows Vista®, Windows® 7 or higher
yy Windows® Media Player® 11.0 or higher
On your computer, you must share the folder
containing video, audio and/or photo content to
play them on this player.
yy Network environment: 100 Mb Ethernet, WLAN
This parts explains the procedure for selecting the
shared folders on your computer.
yy CPU : Intel® Core™ Duo or AMD Athlon™ 64X2,
1.7 GHz or better
Recommended System
Operating
1. Double-click the “SmartShare” icon.
yy Memory : 2 GB of free RAM
2. Click [Movie], [Photo] or [Music] icon on the
center, and then click [Settings] on the top
right corner of the SmartShare PC software. The
[Settings] menu appears on the screen.
yy Graphics card : 128 MB video memory, minimum
resolution of 1024 x 768 pixels, and 16 bit color
settings
3. Click [My Shared Contents] tab, and then click
icon. The [Add/Remove Shared Folders]
menu appears on the screen.
yy Windows® XP (Service Pack 2 or higher),
Windows Vista®, Windows® 7 or higher
4. Click the folder containing the files you want
to share and then click the [OK]. The checked
folder is added to the [My Shared Contents]
and then click the [OK] at the bottom of the
[Settings] menu.
5. Make sure that the SmartShare service turns on
at the [Service] tab.
,,Note
yy If the shared folders or files are not displayed
on the player, click the [My Shared Contents]
on the [Settings] menu, and then click
icon.
yy For more information, click [HELP] on the
[Settings] menu.
yy Free Disk Space : 200 MB
yy Windows® Media Player® 11.0 or higher
yy Network environment: 100 Mb Ethernet, WLAN
Operating
General Playback
Basic operations for photo
content
Basic operations for video and
audio content
To play a slide show
To stop playback
To stop a slide show
Press Z (STOP) during playback.
To pause playback
Press M (PAUSE) during playback.
Press d (PLAY) to resume playback.
To play frame-by-frame (Video)
Press M (PAUSE) during video playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
To scan forward or backward
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed
(Video)
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
In the file list menu of a server, there may have
many types of content in a folder together. In this
case, press C or V to go to the previous or
next content with same type.
Press d (PLAY) to start slide show.
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press A or D
to go to the previous or next photo.
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu during playback, press
DISC MENU.
Use W/S/A/D buttons to navigate through
menu items.
To display the Popup menu
Some BD-ROM discs contain Popup menu that
appears during playback.
Press TITLE/POPUP during playback, and use W/
S/A/D buttons to navigate through menu
items.
4
Operating
Press c or v to play fast forward or fast reverse
during playback.
41
42 Operating
Resume playback
eroyt
u
The unit records the point where you pressed the
Z (STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
4
Operating
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
Last scene memory
er
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
Operating 43
On-Screen Display
Displaying content information onscreen
You can display and adjust various information and
settings about the content.
eroy
To control video playback
eroy
2. Select an [Option] using A/D, and press
ENTER (b).
1. During playback, press INFO/MENU (m).
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
b [Disc Menu] - Accesses menu on a disc.
c [Title/Popup] - Displays the DVD title menu
or BD-ROM’s popup menu, if available.
d [Option] - Displays playback information.
e [Repeat] - Repeats a desired section or
sequence. (page 45)
a Title – Current title number/total number of
titles
b Chapter – Current chapter number/total
number of chapters
c Time – Elapsed playing time/total playback
time
d Audio – Selected audio language or channel
e Subtitle – Selected subtitle.
f Angle – Selected angle/total number of
angles
g TV Aspect Ratio – Selected TV aspect ratio
h Picture Mode – Selected picture mode
Operating
a Progress bar - Displays the current position
and total playing time.
44 Operating
,,Note
yy If no button is pressed for a few seconds,
the on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on
discs or titles.
Setting the slide show option
You can use various options during viewing a
photo in full screen.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
To control photo view
i
Controls playback and sets options while viewing
pictures in full screen.
4
a [Speed] - Use A/D to select a delaying
speed between photos in a slide show.
While viewing pictures, press INFO/MENU (m).
b [Effect] - Use A/D to select a transition
effect between photos in a slide show.
Operating
You can control playback and set options while
viewing pictures in full screen.
c [Music Select] – Select the background music
for the slide show (page 49).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show (page 49).
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
Operating 45
Advanced Playback
Repeating a specific portion
eroy
Repeat playback
erotu
y
This player can repeat a portion you have selected.
Blu-ray Disc / DVD / Video files
During playback, press REPEAT (h) to select a
desired repeat mode.
A-B – Selected portion will be repeated continually.
Chapter – The current chapter will be played back
repeatedly. (BD / DVD only)
Title – The current title will be played back
repeatedly.
All – All the titles or files will be played back
repeatedly. (Movie file only)
Off – Returns to normal playback.
Audio CDs/Audio files
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
– Selected portion will be repeated continually.
(Audio CD only)
Track– The current track or file will be played
back repeatedly.
All – All the tracks or files will be played back
repeatedly.
All – All the tracks or files will be played
back repeatedly in random order.
– The tracks or files will be played back in
random order.
To return to normal playback, press CLEAR.
,,Note
This function may not work on some disc or
title.
2. Select [A-B] and press ENTER (b).
3. Press ENTER (b) at the beginning of the portion
you wish to repeat.
4. Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
5. To return to normal playback, press CLEAR.
,,Note
yy You cannot select a portion less than 3
seconds.
yy This function may not work on some disc or
title.
Playing from selected time
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
3. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press A/D to skip the playback 60 seconds
forward or backward.
4. Press ENTER (b) to start playback from selected
time.
5. Press BACK (1) to exit the On-Screen display.
,,Note
yy This function may not work on some disc or
titles.
yy This function may not work depending
on the file type and ability of the DLNAcompatible digital media server.
4
Operating
To return to normal playback, press CLEAR.
1. During playback, press REPEAT (h).
46 Operating
Selecting a subtitle language
eroy
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
3.Use W/S to select the [Subtitle] option.
4.Use A/D to select desired subtitle language.
By pressing ENTER (b), you can set various
subtitle options.
5. Press BACK (1) to exit the On-Screen display.
,,Note
yy Some discs allow you to change subtitle
selections only via the disc menu. If this is
the case, press TITLE/POPUP or DISC MENU
button and choose the appropriate subtitle
from the selections on the disc menu.
4
Operating
yy You can select the [Subtitle] option on
the On-Screen display directly by pressing
SUBTITLE button.
Hearing a different audio
eroy
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POPUP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
yy You can select the [Audio] option on the
On-Screen display directly by pressing
AUDIO button.
Watching from a different
angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press INFO/MENU (m).
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
2. Select an [Option] using A/D, and press
ENTER (b)
3.Use W/S to select the [Angle] option.
3.Use W/S to select the [Audio] option.
4.Use A/D to select desired audio language,
audio track or audio channel.
5. Press BACK (1) to exit the On-Screen display.
4.Use A/D to select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using A/D, and press
ENTER (b)
3.Use W/S to select the [TV Aspect Ratio]
option.
4.Use A/D to select desired option.
5. Press BACK (1) to exit the On-Screen display.
Operating 47
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
Changing the Picture Mode
eroy
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (m).
Changing subtitle Code Page
y
2. Select an [Option] using A/D, and press
ENTER (b)
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
4.Use A/D to select desired option.
1. During playback, press INFO/MENU (m).
Setting the [User setting] option
2. Select an [Option] using A/D, and press
ENTER (b)
1. During playback, press INFO/MENU (m).
3.Use W/S to select the [Picture Mode] option.
5. Press BACK (1) to exit the On-Screen display.
3.Use W/S to select the [Code Page] option.
2. Select an [Option] using A/D, and press
ENTER (b)
4.Use A/D to select desired code option.
3.Use W/S to select the [Picture Mode] option.
4.Use A/D to select the [User setting] option,
and press ENTER (b).
4
Operating
5. Press BACK (1) to exit the On-Screen display.
5.Use W/S/A/D to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
6.Use W/S/A/D to select the [Close] option,
and press ENTER (b) to finish setting.
48 Operating
Viewing content information
y
Selecting a subtitle file
y
The player can display the content information.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1. Select a file using W/S/A/D.
2. Press INFO/MENU (m).
The file information appears on the screen.
During video playback, you can display the file
information by pressing TITLE/POPUP.
1.Use W/S/A/D to select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER (b).
,,Note
The information displayed on the screen may
not be correct compared to the actual content
information.
4
Changing content list view
yui
Operating
In the [Movie], [Photo] or [Music] menu, you can
change the content list view.
Press red (R) colored button repeatedly.
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
,,Note
yy If you press Z (STOP) during playback, the
subtitle selection is cancelled.
yy This function is not available for playing files
on a server via home network.
Operating 49
Listening to music during slide
show
i
You can display photo files while listening to audio
files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using A/D, and press
ENTER (b).
3.Use W/S to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
4.Use W/S to select a device, and press ENTER
(b).
Available device may differ depending on the
location of the current photo file.
Photo location
Available Device
Disc, USB
Disc, USB
MTP
Media server
5.Use W/S to select a file or a folder you wish to
play.
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers
by connecting this unit to the internet.
1. Check the network connection and settings
(page 20).
2. Insert an USB storage device to the USB port on
the front panel.
An USB storage device is needed to download
bonus content.
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Settings] menu
(page 27).
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option
is set to [Partially Permitted].
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the
disc. Refer to the manual supplied with the disc.
>>Caution
Select g and press ENTER (b) to display the
upper directory.
,,Note
When selecting an audio file from a server,
folder selection is not available. Only file
selection is available.
6.Use D to select [OK], and press ENTER (b) to
complete music selection.
Do not extract the connected USB device
while content is being downloaded or a
Blu-ray disc is still in the disc slot. Doing so
may damage the connected USB device and
BD-Live features may not operate properly
with the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
,,Note
yy Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
yy It may take up to several minutes to load
and start enjoying BD-Live content.
yy For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
4
Operating
MTP
Media server
Advanced Features
50 Operating
LG AV Remote
You can control this player with your iPhone
or Android phone via your home network. This
player and your phone must be connected to your
wireless network device such as access point. Visit
“Apple iTunes” or “Google Android Market (Google
Play Store)” for detailed information of “LG AV
Remote”.
Private Sound Mode
Using the Premium
You can use various content services via Internet
with the Premium feature.
1. Check the network connection and settings
(page 20).
2. Press HOME ( ).
3. Select the [Premium] using A/D, and press
ENTER (b).
By downloading “LG AV Remote” application on
your smart phone or tablet, you can connect your
headset and enjoy the sound from your player on
your smart devices.
This feature transmits video signal to TV through
HDMI and Audio signal to smart phone or tablet
through Wi-Fi. For more detailed information,
please refer to “LG AV Remote” application.
4
,,Note
Operating
yy When you use the unit with MUSIC flow,
private sound mode is unavailable.
yy Not all modes, support sound privacy and
pairing multiple devices is not available.
4. Select an online service using W/S/A/D,
and press ENTER (b).
,,Note
yy For detailed information of each service,
contact the content provider or visit support
link of the service.
yy The content of Premium services and
service related information, including user
interface, is subject to changes. Please refer
to the web site of each service for most upto-date information.
yy Using Premium features with wireless
network connection may result in improper
streaming speed by interference from
household devices that are using radio
frequencies.
yy For the first time to access [Premium],
current country setting appears.
yy If you want to change the country setting,
go to [Settings] > [NETWORK] > [Smart
Service Setting] > [Country Setting]. Select
[Manual] and press ENTER (b) on [Country
Setting] menu.
yy When changing the sound effect, the audio
output may be delayed depending on your
internet environment.
Operating
Enjoying with LG
Multi-room Audio (LG
Music Flow)
,,Note
yy If you use this unit with MUSIC flow, at least
one unit should be connected by LAN
cable. For more detail for use with MUSIC
flow, refer to the MUSIC flow’s user manual.
tu
yy It is recommended to connect up to 4
speakers for smooth playback.
LG smart Hi-Fi audio system MUSIC flow allows you
to enjoy music with the several speakers wirelessly.
yy Signal interference may cause the playback
to stop.
Using MUSIC flow, you can enjoy audio contents
being played by this unit with high quality.
yy If playback doesn’t work smoothly, the
connection may be broken automatically.
1. Check the network connection and settings
(page 20). The player and speakers must be
connected to the same network.
yy When you perform private sound mode,
this function is unavailable.
2. During music playback, press green (G) colored
button. Select speakers using W/S and
ENTER (b). You can check multiple MUSIC
flows are listening to. To change MUSIC flow’s
channel, press D when the checked speaker is
highlighted and select the output option using
W/S and ENTER (b).
yy If you press BACK (1) to go back to file
browser during playback with MUSIC flow,
MUSIC flow stops playback.
yy If your MUSIC flow is not displayed on the
list, reset network setting on the setting
menu.
If you select [Mute Blu-ray Disc™ Home Theater],
you can listen using only MUSIC flow.
3. Select [OK], and press ENTER (b) to complete
speaker selection.
4
Operating
yy You cannot control the volume level of
MUSIC flow speaker with this unit’s volume
control buttons.
yy The type of MUSIC flow speaker differs
depending on the connected speaker.
If your MUSIC flow speaker is Stereo type,
you can select the channel from among
Stereo, Left or Right.
51
52 Operating
Using Bluetooth®
technology
About Bluetooth®
Bluetooth® is wireless communication technology
for short range connection.
The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the Bluetooth® in the other rooms.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA etc.
4
Bluetooth® Profiles
Operating
In order to use Bluetooth® wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music stored on
the Bluetooth® devices
Pairing your unit and Bluetooth®
device
Before you start the pairing procedure, make sure
the Bluetooth® feature is turned on in to your
Bluetooth® device. Refer to your Bluetooth® device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth® function by using the
FUNCTION.
Appears “BT READY” in display window.
2. Operate the Bluetooth® device and perform the
pairing operation. When searching for this unit
with the Bluetooth® device, a list of the devices
found may appear in the Bluetooth® device
display depending on the type of Bluetooth®
device.Your unit appears as “LG-HTS (XX:XX)”.
3. Select “LG-HTS (XX:XX).
4. When this unit is successfully paired with your
Bluetooth® device, “PAIRED” appears in the
display window.
,,Note
yy Depending on the Bluetooth® device type,
some device have a different pairing way.
yy XX:XX means the last four digits of
Bluetooth® address. For example, if your
unit has a Bluetooth® address such as
9C:02:98:4A:F7:08, you will see “LG- HTS
(F7:08)” on your Bluetooth® device.
5. Listen to music.
To play a music stored on your Bluetooth®
device, refer to your Bluetooth® device’s user
guide.
,,Note
If you change the function of the unit, the
Bluetooth® function is disconnected, operate
pairing again.
Operating 53
,,Note
yy When using Bluetooth® technology, you
have to make a connection between the
unit and the Bluetooth® device as close as
possible and keep the distance.
However it may not work well in the case
below :
-- There is a obstacle between the unit and
the Bluetooth® device.
-- There is a device using same frequency
with Bluetooth® technology such as a
medical equipment, a microwave or a
wireless LAN device.
yy You should connect your Bluetooth® device
to this unit again when you restart it.
yy When you select Bluetooth® function
again after changing to other functions,
Bluetooth® connection may be
disconnected. You should reconnect the
Bluetooth® device to use this function.
yy You cannot control the Bluetooth® device
with this unit.
yy Pairing is limited to one Bluetooth® device
per one unit and multi-pairing is not
supported.
yy Depending on the type of the device, you
may not be able to use the Bluetooth®
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc..
yy The more distance between the unit and
the Bluetooth® device, the lower the sound
quality becomes.
yy Bluetooth® connection will be disconnected
when the unit is turned off or the Bluetooth®
device gets far from the unit.
yy When Bluetooth® connection is
disconnected, connect the Bluetooth®
device to the unit again.
yy When not connected the Bluetooth®, “BT
READY” appears on the display window.
4
Operating
yy The sound may be interrupted when the
connection is interfered with by other
electronic waves.
54 Operating
LG Sound Sync
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that supports LG Sound
Sync. Make sure of the LG Sound Sync logo on your
TV.
Controllable function by LG TV’s remote control :
Volume up/down, mute
Refer to the TV’s instruction manual for the details
of LG Sound Sync.
,,Note
4
Turning on LG Sound Sync
1. Turn on the unit by pressing 1 (Power) on the
remote control or 1/! on the unit.
2. Select LG TV function by using FUNCTION on
the remote control or F on the unit until the
function is selected.
3. Set up the sound output of TV to listen to the
sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [LG Sound Sync (Wireless)]
“PAIRED” appears on the display window for
about 3 seconds and then you can see “LG TV”
on the display window if connecting normally
between this unit and your TV.
,,Note
Operating
yy You can also use the remote control of
this unit while using LG Sound Sync. If you
use TV's remote control again, the unit
synchronizes with the TV.
yy If you turned off the unit directly by pressing
1 (Power), LG Sound Sync (Wireless) will
be disconnected. To use this function again,
you should reconnect the TV and the unit.
yy When the connection fails, make sure of the
condition of the TV and power.
yy Details of TV setting menu vary depending
on the models of your TV.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
yy The device with Bluetooth® wireless
technology will be disconnected, if Sound
Sync function is selected.
-- turn off the unit.
-- Changing the function to the others.
-- Disconnecting the wireless connection
caused by interference or a distance.
yy This unit cannot support LG Sound Sync
(Optical) by the optical connection.
Troubleshooting 55
Troubleshooting
General
Symptom
The unit does not work
properly.
Cause & Solution
yy Turn off the power of this unit and the connected external device (TV,
DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external
device (TV, DVD-player, Amplifier, etc.) and then try connecting again.
The Power does not turned on.
yy Plug the power cord into the wall outlet securely.
The unit does not start
playback.
yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Insert the disc with the playback side down.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
yy Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
yy If you use an USB extension cable or USB HUB, the USB devices may
not be recognized.
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play video, photo or
audio files.
yy The files are not recorded in a format that the unit can play.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The unit does not support the codec of the video file.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
The unit is not operating
normally.
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again.
5
Troubleshooting
yy An USB device which requires additional program installation when
you have connected it to a computer is not supported.
56 Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not work.
yy The connected USB storage may not have enough space. Connect
the USB storage with at least 1 GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (page 20).
yy Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
yy The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such
as YouTube™, etc.) are often
stopped or “buffer” during
playback.
yy Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed is recommended.
Media servers are not displayed yy The firewall or anti-virus software on your media server is running.
on the device list.
Turn off the firewall or anti-virus software running on your media
server.
yy The player is not connected to the local area network that your media
server is connected.
5
Troubleshooting
Cannot connect the player to
the access point or wireless
LAN router.
yy The wireless communication may be interrupted from household
devices that are using radio frequencies. Move the player away from
them.
Access point is not displayed
on the “Access point name” list.
yy The access point or wireless LAN router may not broadcast its SSID.
Set your access point to broadcast its SSID through your computer.
yy Your network device such as access point may not set with available
frequency range and channel that this player can support.
Try setting the frequency range and channel on the network device
setting.
Troubleshooting 57
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears
yy You are playing a disc recorded in a color system that is different from
your TV.
yy Set the resolution which your TV accepts.
Sound
Symptom
Cause & Solution
There is no sound or the sound
is distorted.
yy The unit is in scan, slow motion, or pause mode.
yy The sound volume is low.
You can update the player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
Open Source Software Notice
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
Troubleshooting
Customer Support
5
58 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
By pressing
You can
1 (TV POWER)
Turn the TV on or off.
AV/INPUT
Switch the TV’s input source
between the TV and other
input sources.
PR/CH W/S
Scan up or down through
memorized channels.
VOL +/–
Adjust the volume of the TV
,,Note
6
Appendix
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
Setting up the remote to
control your TV
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with
the numerical buttons (see the table below).
Manufacturer
Code number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
Samsung
6, 7
Sony
8, 9
Hitachi
4
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may
be reset to the default setting. Set the appropriate
code number again.
Appendix 59
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
Option 1:
1. The update menu will appear on the screen
when you turn on the player.
2.Use A/D to select a desired option and then
press ENTER (b).
Software update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 20).
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
Starts the software update.
[Cancel]
Exits the update menu and the
home appears.
Option 2:
If the software update is available from the update
server, the “Update” icon appears in the Home
menu. Press blue (B) colored button to start the
update procedure.
6
The player will check for the newest update.
,,Note
yy Pressing ENTER (b) while checking for the
update will end the process.
yy If there is no update available, the Message,
“No update is found. The current set is the
latest version.” appears. Press ENTER (b) to
return to the [Home Menu].
Appendix
[OK]
60 Appendix
4. If newer version exists, the message “A new
update was found. The update takes a few
minutes. Do you want to update?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. To update software the next time, the software
update procedure has to be started from the
beginning again.
>>Caution
Do not turn off the power during the software
update.
8. When update is completed, the power will be
turned off automatically in a few seconds.
9. Turn the power back on. The system now
operates with the new version.
,,Note
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer Support” on page
57.
6
Appendix
Appendix
61
Additional Information
File requirement
Video files
File
Location
File
Extension
Audio
Format
Codec Format
Subtitle
Disc,
USB
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.vob”, “.3gp”,
“.mov”, “.trp”, “.m2t”,
“.mpe”, “.m1v”, “.m2v”,
“.wm”, ”.flv”, “.ts”, “.dat”,
”.rmvb”
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3), RV30, RV40
Dolby
Digital,
DTS, MP3,
WMA,
AAC, AC3,
COOK
SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha
(.ssa/.txt), MicroDVD
(.sub/.txt), VobSub (.sub),
SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.
txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
DLNA
“.avi”, “.mpg”, “.mpeg”,
“.mkv”, “.mp4”, “.asf”,
“.wmv”, “.m4v” (DRM
free), “.3gp”, “.mov”,
“.mpe”, “.m1v”, “.m2v”,
”.flv”, “.ts”, “.dat”
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM
(WMV3)
Dolby
Digital,
DTS, MP3,
WMA,
AAC, AC3
SubRip (.srt / .txt), SAMI
(.smi), SubStation Alpha
(.ssa/.txt), MicroDVD (.sub/.
txt), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.
txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Audio files
File
Location
File
Extension
Bitrate
Note
Disc,
USB
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”,
“.aiff”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320
kbps (MP3)
Some wav files are
not supported on
this player.
DLNA
“mp3”, “.wma”,
“.wav”, “.m4a”
(DRM free),
“.flac”, “.ogg”
within 32 - 48 kHz
(WMA), within 16 - 48
kHz (MP3)
within 32 - 192 kbps
(WMA), within 32 - 320
kbps (MP3)
Some wav files are
not supported on
this player.
Photo files
File
Location
Disc,
USB,
DLNA
File
Extension
“.jpg”, “.jpeg”,
“.png”, “.gif”,
“.mpo”, “.jps”
Recommended
Size
Note
Less than 4,000 x 3,000 x 24 bit/pixel Progressive and lossless
Less than 3,000 x 3,000 x 32 bit/pixel compression photo image files
are not supported.
6
Appendix
Sampling Frequency
62 Appendix
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/Folder: Less than 2000 (total
number of files and folders)
yy RMVB file only supports external subtitle.
yy Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
yy File compatibility may differ depending on
the server.
yy Because the compatibility on DLNA server
are tested on the SmartShare environment,
file requirements and playback functions
may differ depending on media servers.
yy The file requirements on page 61 are
not always compatible. There may have
some restrictions by file features and media
server’s ability.
yy Playing video subtitle files are only available
on a media server created by SmartShare PC
software downloaded from website.
yy The files from removable media such as USB
drive, DVD-drive etc. on your media server
may not be shared properly.
yy The total playback time indicated on the
screen of an audio file may not be correct
for VBR files.
6
Appendix
yy HD video files contained on the CD/DVD or
USB 1.0/1.1 may not be played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
,,Note
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy This player supports UTF-8 files even it
contains Unicode subtitle content. This
player can not support the pure Unicode
subtitle files.
yy Depending on the types of file or ways of
recording, it may not play back.
yy A disc which was recorded by multi-session
on normal PC is not supported on this
player.
yy To playback a video file, the video file name
and Subtitle file name must be the same.
yy When you play a video file with a extension
such as “.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp” or “.m2t”,
your player may not support subtitle files.
yy Video / Audio codec compatibility may
differ depending on video file.
AVCHD (Advanced Video
Codec High Definition)
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital
video camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
Appendix 63
About DLNA
Compatibility notes
This Player is a DLNA Certified digital media player
that can display and play video, photo and audio
content from your DLNA-compatible digital media
server (PC and Consumer Electronics).
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
The Digital Living Network Alliance (DLNA) is a
cross-industry organization of consumer electronics,
computing industry and mobile device companies.
Digital Living provides consumers with easy sharing
of digital media through your home network.
The DLNA certification logo makes it easy
to find products that comply with the DLNA
Interoperability Guidelines. This unit complies with
DLNA Interoperability Guidelines v1.5.
When a PC running DLNA server software or
other DLNA compatible device is connected to
this player, some setting changes of software or
other devices may be required. Please refer to the
operating instructions for the software or device for
more information.
Certain system requirements
For high definition video playback:
yy High definition display that has HDMI input jack.
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-inpicture function. For the playback method, refer
to the instructions in the disc.
yy Viewing high-definition content and upconverting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
yy Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yy You can use an USB device to store some disc
related information, including downloaded
online content. The disc you are using will
control how long this information is retained.
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
6
Appendix
64 Appendix
Audio Output Specifications
Jack/Setting
Source
HDMI OUT
PCM
DTS Re-encode *3
Dolby Digital
PCM 5.1ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 5.1ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 5.1ch
DTS
Dolby TrueHD
DTS
PCM 5.1ch
DTS
DTS
DTS-HD
PCM 5.1ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
DTS
Linear PCM 2ch
Linear PCM 5.1ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 7.1ch
DTS
Linear PCM 7.1ch
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [Auto]. (Except LPCM
Codec : the output always includes interactive
and secondary audio.)
*2 This player automatically selects the HDMI audio
according to the decoding capability of the
connected HDMI device even though [Digital
Output] option is set to [Auto].
6
Auto *1 *2
Appendix
*3 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[Auto]).
yy The audio is outputted up to PCM 48 kHz/16 bit
for MP3/WMA file and PCM 44.1kHz/16 bit for
Audio CD during playback.
yy With digital audio connection (HDMI OUT),
Disc Menu button sounds of BD-ROM may not
be heard if the [Digital Output] option is set to
[Auto].
yy If the audio format of the digital output does
not match the capabilities of your receiver, the
receiver will produce a strong, distorted sound
or no sound at all.
yy Multi-channel Digital Surround Sound via digital
connection can only be obtained if your receiver
is equipped with a Digital Multi-channel decoder.
yy This setting is not available on the input signal
from an external device.
Appendix 65
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
Afghanistan AF Fiji FJ Monaco MC Singapore SG
Argentina AR Finland FI Mongolia MN Slovak Republic SK
Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
PT Uruguay UY
RO Uzbekistan UZ
Czech Republic CZ Kuwait KW Romania Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
Croatia LY Russian
LU Federation Vietnam RU Zimbabwe SA
SN
TH
VN
ZW
6
Appendix
HR Kenya KE Portugal SI
66 Appendix
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
6
Appendix
LanguageCode
LanguageCode
LanguageCode
LanguageCode
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
Bulgarian 6671
Interlingua 7365
Persian 7065
Turkmen 8475
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
Appendix 67
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“x.v.Color” is a trademark of Sony Corporation.
Blu-ray Disc™, Blu-ray™, BD-Live™, BONUSVIEW™
and the logos are trademarks of the Blu-ray Disc
Association.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
Java is a trademark of Oracle and/or its affiliates.
6
Appendix
DLNA®, the DLNA Logo and DLNA CERTIFIED® are
trademarks, service marks, or certification marks
of the Digital Living Network Alliance.
68 Appendix
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
Other trademarks and trade names are those of
their respective owners.
The Wi-Fi CERTIFIED Logo is a certification mark
of the Wi-Fi Alliance.
6
Appendix
The Wi-Fi Protected Setup Mark is a trademark of
the Wi-Fi Alliance.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Appendix 69
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology
is provided at the Cinavia Online Consumer
Information Center at http://www.cinavia.com. To
request additional information about Cinavia by
mail, send a postcard with your mailing address
to: Cinavia Consumer Information Center, P.O. Box
86851, San Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark
of Verance Corporation. Copyright 2004-2013
Verance Corporation. All rights reserved by Verance.
Reverse engineering or disassembly is prohibited.
6
Appendix
70 Appendix
Specifications
General (LAB550H)
Power requirements
Refer to the main label on the unit.
33 W
Power consumption
Networked standby : 0.5 W
(If all network ports are activated.)
Dimensions (W x H x D)
(700 x 73 x 350) mm
Net Weight (Approx.)
7.4 kg
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
Operating humidity
5 % to 90 %
Input/Output
OPTICAL IN
3 V (p-p), Optical jack x 1
PORTABLE IN
0.5 Vrms (3.5 mm stereo jack) x 1
HDMI IN
19 Pin (Type A, HDMI™ connector) x 2
HDMI OUT
19 Pin (Type A, HDMI™ connector) x 1
Available Digital Input Audio
Sampling Frequency
32 kHz, 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
Amplifier
6
Total
100 W
Front
50 W x 2 (4 Ω at 1 kHz)
THD
10 %
Appendix
Appendix
71
System
Laser
Semiconductor laser
wavelength
405 nm / 650 nm
Signal system
Standard PAL/NTSC color TV system
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Wireless LAN (internal antenna)
Integrated IEEE 802.11b/g/n (2.4 GHz band) wireless networking
access
Bus Power Supply (USB)
5 V 0 500 mA
Bluetooth®
Codec
SBC
yy Design and specifications are subject to change without notice.
6
Appendix
72 Appendix
Maintenance
Notes on discs
Handling discs
Handling the unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Maintaining the unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Appendix 73
Important Information
relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a “Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-todate information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
Download PDF

advertising