LG | NP6530 | LG NP6530 Owner’s Manual

ENGLISH
OWNER’S MANUAL
WIRELESS SPEAKER
Please read this manual carefully before operating
your set and retain it for future reference.
NP6530
www.lg.com
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 1
2013-05-21
11:47:35
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 2
2013-05-21
11:47:35
1
Getting Started
Getting Started
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
NOTICE: For safety marking information including
product identification and supply ratings, please
refer to the main label on the bottom of the
apparatus.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 3
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
3
This device is equipped with a portable battery or
accumulator.
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
2013-05-21
11:47:36
4
Getting Started
CAUTION:
1
yy The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
Getting Started
yy No naked flame sources, such as lighted candles,
should be placed on the apparatus.
yy Internal lithium battery in the unit should not be
replaced by user because of danger of explosion
if battery is incorrectly replaced, and must be
replaced with the same type battery by expert.
yy Only use the AC adapter supplied with this
device. Do not use a power supply from another
device or another manufacturer. Using any other
power cable or power supply may cause damage
to the device and void your warranty.
yy To avoid fire or electric shock, do not open the
unit. contact to qualified personnel only.
yy Do not leave the unit in a place near the heating
appliances or subject to direct sunlight, moisture,
or mechanical shock.
yy To clean the unit, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth
lightly moistened with a mild detergent solution.
Do not use strong solvents such as alcohol,
benzine, or thinner, as these might damage the
surface of the unit.
yy Do not use volatile liquids such as insecticide
spray near the unit. Wiping with strong pressure
may damage the surface. Do not leave rubber
or plastic products in contact with the unit for a
long period of time.
yy Do not place the unit over the vehicle’s air bag.
When the air bag deploys, it may result in injury.
Before using in the car, fix the unit.
yy Do not use the handsfree function during driving
a car.
yy Do not leave the unit on an unstable place such
as high shelves. It may fall down because of the
vibration of the sound.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 4
2013-05-21
11:47:36
Table of Contents
5
Table of Contents
1
Getting Started
3
Safety Information
6
Main Features
6
– LG Bluetooth Remote
6Accessories
6Introduction
7
Main Unit
8
Charging the Unit
8
– Connecting the AC adapter
8
– Checking the charging status
8
– Battery protection
1
3Troubleshooting
16Troubleshooting
16 – General
2
4Appendix
17About 1/! Button’s Condition
18 Trademarks and Licenses
18 Handling the Unit
19Specifications
3
2Operating
9
9
9
9
10
10
10
12
14
14
14
14
15
4
Basic Operations
– Using power button
– Using volume button
Listening to Music from Your External
Device
– About ferrite core (Optional)
Using a Bluetooth Wireless Technology
– Listening to music of a bluetooth
device
– Using bluetooth app
Other Operations
– Using handsfree function
– Auto power down
– LG Tag On
– LG Sound Sync
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 5
2013-05-21
11:47:36
6
Getting Started
Main Features
1
Accessories
Getting Started
Made for iPod/iPhone/iPad or
Android device
Please check and identify the supplied accessories.
Enjoys music from iPod/iPhone/iPad or Android
device with simple connection.
Compatible iPod/iPhone/iPad models
iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPad (3rd
and 4th generation), iPad 2, iPad, iPad mini, iPod
touch (3rd through 5th generation),
AirPlay, iPad, iPhone, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and
other countries. Lightning is a trademark of Apple
Inc.
Portable In
Listens to music from your portable device.
LG Sound Sync
Controls volume level of this unit by the remote
control of your LG TV that is compatible with LG
Sound Sync.
AC adapter (1)
Power cord (1)
Portable Cable (1)
Introduction
Symbol used in this manual
,,Note
Indicates special notes and operating features.
LG Bluetooth Remote
You can control this unit with your iPod touch/
iPhone/iPad or Android device via Bluetooth. This
unit and your device must be paired for Bluetooth.
Visit “Apple App Store” or “Google Android Market
(Google Play Store)” or use the QR code shown
below to search for “LG Bluetooth Remote” app. For
detailed information, refer to page 12.
(Apple iOS)
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 6
>>Caution
Indicates cautions for preventing possible damages
from abuse.
(Android OS)
2013-05-21
11:47:37
Getting Started
7
Main Unit
1
Getting Started
a1/!
- Turns on / off : Press and hold 1/!
- Selects the function and input source.
b+/- (Volume) : Adjusts speaker volume.
cPhone button
dSpeaker
eMicrophone
f SOUND SYNC
Synchronizes this unit and your LG TV.
gReset hole
hDC IN (AC adapter input)
iPORT.IN (3.5 mm)
Listens to music from your portable device.
jNFC Tag (page 14)
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 7
>>Caution
Precautions in using the touch buttons
yy Use the touch buttons with clean and dry
hands. - In a humid environment, wipe out
any moisture on the touch buttons before
using.
yy Do not press the touch buttons hard to
make it work. - If you apply too much
strength, it can damage the sensor of the
touch buttons.
yy Touch the button that you want to work in
order to operate the function correctly.
yy Be careful not to have any conductive
material such as metallic object on the
touch buttons. It can cause malfunctions.
2013-05-21
11:47:38
8
Getting Started
Charging the Unit
1
Connecting the AC adapter
Getting Started
This device uses built-in battery. Before using it,
charge the battery by connecting the AC Adapter.
1. Connect the supplied AC power cord to the AC
adapter.
2. Connect the AC adapter cable to DC IN adapter
input.
3. Plug the AC power cord into an AC outlet.
Checking the charging status
When AC Adapter is connected, battery charging
is started. You can check the charging status with
1/! button. (Refer to the page 17 for details)
yy Charging : The 1/! button blinks red or white.
yy Fully charged : The 1/! button turns red or
white.
,,Note
Operating time is approx. 10 hours. (Based on
30% volume, 1kHz signal, 500 mV portable
input and fully charged status)
It may vary depending on the battery status
and operational conditions.
Battery protection
AC power cord
AC Adapter
>>Caution
Only use the AC adapter supplied with this
device. Do not use a power supply from
another device or manufacturer. Using any
other power cable or power supply may cause
damage to the device and void your warranty.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 8
When AC Adapter is connected, if the unit is in high
or low temperature, there may be a problem with
the battery. So the unit has the battery protection
feature. (refer to table as below.)
In this case, use the unit in proper place where the
temperature or humidity is not so high or low.
Battery temperature : Very low
Power
Off
(Red) (White)
Warning
Battery temperature : Very High
Power
On
(Red) (White) (Off )
Blinks
10 sec
2013-05-21
11:47:38
Operating
Basic Operations
Using power button
9
Listening to Music
from Your External
Device
The unit can be used to listen to the music from
many types of external device.
2
Operating
Power On / Off
Power On / Off: Press and hold the 1/! button
Changing the mode
When turing on the unit, you can change the
mode. Please 1/! button repeatedly, the mode is
changed with the voice sound.
(Portable In -> bluetooth -> Portable In)
,,Note
You can enjoy the Sound Sync feature by
pressing SOUND SYNC button. Refer to page
15
MP3 or PMP etc
1. Connect the external device to the PORT.IN
connector of the unit.
2. Turn the power on by pressing 1/! button.
Using volume button
3.Press 1/! button repeatedly to select portable
in mode.
4. Turn the external device on and start playing.
You can adjust speaker volume. When you touch
the volume button, the 1/! button blinks twice in
white color.
,,Note
While adjusting volume if you try to increase
the volume when it is already at maximum
level, a beep is played on the unit.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 9
2013-05-21
11:47:39
10
Operating
About ferrite core (Optional)
This ferrite core can reduce noises.
How to attach the ferrite core
Using a Bluetooth
Wireless Technology
1. Pull the stopper [a] of the ferrite core to open.
2. Wind the portable cable on the ferrite core.
3. Close the ferrite core until it clicks.
2
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
Operating
(The sound may be interrupted when the
connection interfered by the other electronic wave
or you connect the bluetooth in the other rooms.)
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges. A
mobile phone with Bluetooth® wireless technology
can be operated via the Cascade if the connection
was made via Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain profiles.
This unit is compatible with following profile.
A2DP (Advanced Audio Distribution Profile)
Listening to music of a
bluetooth device
Before you start the pairing procedure, make
sure the Bluetooth feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device’s
user guide. Once a pairing operation is performed,
it does not need to be performed again.
1. Select the Bluetooth function by pressing the
1/! button repeatedly.
2. Operate the Bluetooth device and perform the
pairing operation. When searching for this unit
with the Bluetooth device, a list of the devices
found may appear in the Bluetooth device
display depending on the type of Bluetooth
device. Your unit appears as “LG Portable
(XX:XX)”.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 10
2013-05-21
11:47:40
Operating
,,Note
XX:XX means the last four digits of BT address.
For example, if your unit has a BT address such
as 9C:02:98:4A:F7:08, you will see “LG Portable
(F7:08)” on your Bluetooth device.
3. Enter the PIN code.
PIN code : 0000
,,Note
4. When this unit successfully is connected with
your Bluetooth device, the 1/! button blinks
twice in white color.
,,Note
yy Depending on the Bluetooth device type,
some devices have a different pairing way.
yy Try pairing procedure if your device name is
not in the device list.
5. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device’s user guide.
According to your Bluetooth device’s volume
level, the volume level of Bluetooth will be
adjusted.
,,Note
yy Sound from the unit can be distorted if you
raise the volume of Bluetooth device up to
two-thirds or more.
yy When you use the Bluetooth function,
adjust the volume of a Bluetooth device to
a proper level to listen to.
,,Note
yy On portable in mode, After your device
is connected to the unit via Bluetooth,
the function switches to Bluetooth mode
automatically.
yy After searching for this unit on your
Bluetooth device, connect the Bluetooth
device to this unit. Then play music you
want.
yy The sound may be interrupted when
the connection interfered by the other
electronic wave.
yy You cannot control the Bluetooth device
with this unit.
2
Operating
Depending on the Bluetooth device type,
some devices do not require a PIN code.
11
yy Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
yy Although the distance between your
Bluetooth and the set is less than 10 m,
there are obstacles between both, your
Bluetooth device cannot be connected.
yy Depending on the type of the device,
you may not be able to use the Bluetooth
function.
yy You can enjoy wireless system using phone,
MP3, Notebook, etc.
yy The electrical malfunction due to devices
using same frequency such as Medical
equipment, Microwaves or wireless
LAN devices, the connection will be
disconnected.
yy When someone stands and interrupts
communication between Bluetooth device
and the player, the connection will be
disconnected.
yy If the gotten away of the distance between
Bluetooth and the unit, the sound quality
is lower and lower. The connection will
disconnect when the space between the
Bluetooth and the unit gets out of the
operating range of Bluetooth.
yy The device with Bluetooth wireless
technology is disconnected, if you turn off
the main unit or put the device away from
the main unit more than 10 m.
yy If the Bluetooth device is disconnected, you
should connect the Bluetooth device to
your unit.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 11
2013-05-21
11:47:40
12
Operating
Using bluetooth app
Install “LG Bluetooth Remote” app
by using QR code
About “LG Bluetooth Remote” app
1. Install “LG Bluetooth Remote” app through QR
code. Use the scanning software to scan the QR
code.
“LG Bluetooth Remote” app brings a suite of new
features to this unit.
To enjoy more features, you are recommended to
download and install free “LG Bluetooth Remote”
app.
2
Operating
Install “LG Bluetooth Remote”
app through “Apple App Store” or
“Google Android Market (Google
Play Store)”
1. Tap the “Apple App Store” icon or “Google
Android Market (Google Play Store)” icon.
2. In the search bar, type in the “LG Bluetooth
Remote” and search it.
3. In the search result list, find and tap “LG
Bluetooth Remote” to start downloading
Bluetooth app.
4. Tap an icon for installation.
5. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device is
equipped with “Apple App Store” or “Google
Android Market (Google Play Store)”.
yy If you want to get more information, refer to
explanation of BT app in “Apple App Store”
or “Google Android Market (Google Play
Store)”
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 12
(Apple iOS)
(Android OS)
2. Tap an icon for installation.
3. Tap an icon for downloading.
,,Note
yy Make sure that your Bluetooth device is
connected to the Internet.
yy Make sure that your Bluetooth device has a
scanning software application. If you don’t
have one, download one from “Apple App
Store” or “Google Android Market (Google
Play Store)”.
2013-05-21
11:47:41
Operating
13
Activate bluetooth with “LG
Bluetooth Remote” app
“LG Bluetooth Remote” app helps to connect your
bluetooth device to this unit.
,,Note
In case of iOS device ;
After performing the pairing operation,
activate Bluetooth with LG Bluetooth Remote
App.
2
Operating
1.Tap “LG Bluetooth Remote” app icon on the
home screen to open “LG Bluetooth Remote”
app, and go to the main menu.
2. Tap [Setting] and select the unit you want.
3. If you want to get more information to operate,
tap [Setting] and [Help].
,,Note
yy BT app will be available in the software
version as follow;
Android O/S : Ver 2.3.3 (or later)
iOS O/S : Ver 4.3 (or later)
yy This unit does not support the multi-pairing.
If this unit is already connected with other
Bluetooth device, disconnect that device
and then try again.
yy Depending on the Bluetooth device, “LG
Bluetooth Remote” app may not work.
yy “LG Bluetooth Remote” app for Apple iOS is
slightly different from that of Android OS.
yy The connection you’ve made may be
disconnected if you select other application
or change the setting of the connected
device via “LG Bluetooth Remote” app. In
such a case, please check the connection
status.
yy To prevent a malfunction, you are
recommended to connect only one device
to this unit.
yy After connection of BT app, music may be
output from your device. In this case, try
connecting procedure again.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 13
2013-05-21
11:47:41
14
Operating
Other Operations
LG Tag On
Using handsfree function
1. Activates the NFC feature of your NFC-enabled
phone.
Preparation: Your smartphone must be paired
with the unit via bluetooth.
2
1. When a call cames in, press { to receive the
phone.
LG Tag On allows you to install and open “LG
Bluetooth Remote” app to NFC-enabled phone.
2. Turn on the unit.
3. Tag the back of your NFC-enabled phone over
the unit.
Operating
,,Note
yy While listening to music, if incoming calls,
the music pauses automatically. Then the
unit and your smartphone ring at the same
time.
yy Depending on the type of bluetoothenabled phone or surrounding
environment, the sound quality may be
lowered or the unit may not work properly.
2. You can select the desired option by using {
button, refer to below.
Condition
Incoming
Call
During Call
Press {
Press and
Hold {
Answer Call
Reject Call
Hang Up
Switch Call
from unit to
Phone
Auto power down
-- If “LG Bluetooth Remote” app is not installed on
your NFC-enabled phone, the linked screen with
“LG Bluetooth Remote“ app is displayed.
-- If “LG Bluetooth Remote” app is installed on your
NFC-enabled phone, “LG Bluetooth Remote”
app is activated and Blutooth is connected
automatically.
,,Note
yy You must activate the NFC feature of your
NFC-enabled phone.
yy If your NFC-enabled phone’s screen is
locked, it will not read the NFC.
yy If your smart phone case is plated with
chrome, NFC is unavailable. Depending on
your case’s material or thickness, NFC may
not be read well.
This unit will be off itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes.
Also this unit will power down if no input is
connected using the analogue input after six hours.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 14
2013-05-21
11:47:41
Operating
LG Sound Sync
15
With wireless connection
1. Turn on the unit.
You can control some functions of this unit by
your TV’s remote control with LG Sound Sync. It is
compatible with the LG TV that is supported LG
Sound Sync. Make sure of the LG Sound Sync logo
on your TV.
Refer to the TV’s instruction manual for the details
of LG Sound Sync.
,,Note
yy When the connections failed, make sure of
the condition of the TV and power of it.
yy Make sure of the condition of this unit and
the connection in the cases below when
using LG Sound Sync.
-- Turned off the unit.
-- Changing the function to the others.
-- Disconnecting the wireless connection
caused by interference or a distance.
3. Set up LG Sound Sync (Wireless) on the TV. Refer
to the TV’s instruction manual.
4. When this unit successfully is connected with
your LG TV, the 1/! button blinks twice in
Green color.
If your unit and LG TV are connected normally,
1/! button will blink or stop blinking defending
on battery condition. (Refer to “Battery” on page
17)
2
Operating
Controllable function by LG TV’s remote control :
Volume up/down, mute
2.Press SOUND SYNC to select the LG Sound
Sync function. 1/! button will stay in Green
color.
,,Note
yy Once LG TV function is selected, the unit
connects automatically the TV which is
connected lately when restarting.
yy The device with Bluetooth wireless
technology will be disconnected, if Sound
Sync function is selected. Bluetooth
remote app you’ve already connected is
disconnected either.
yy In LG Sound Sync function, you can search
and connect this unit through LG TV only.
yy In LG Sound Sync function, the volume step
of this unit will be changed to the volume
step of LG TV.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 15
2013-05-21
11:47:41
3Troubleshooting
16
Troubleshooting
Troubleshooting
General
Problem
No Power.
Cause & Correction
yy The battery is discharged. Recharge the battery.
yy Connect the unit to the power supply with the AC adapter.
yy The unit or your smart device’s volume is set to minimum. Check and adjust
the volume of the unit or bluetooth device’s volume.
3
No sound or sound
distortion.
yy When you use an external device at high volume, the sound quality may be
deteriorated. Lower the volume of the devices.
Troubleshooting
yy If you use the unit for purposes other than listening to music, the sound
quality may be lowered or the unit may not work properly.
yy Switch bluetooth off and on again on your bluetooth device, then try pairing
again.
yy Be sure your bluetooth device is on.
yy Remove the obstacle in the path of the bluetooth device and the unit.
yy Depending on the type of the bluetooth device or surrounding
environment, your device may not be paired with the unit.
Bluetooth pairing does
not work well.
yy While using Bluetooth, you may not activate BT app. Disconnect Bluetooth
device you have connected before to use BT app properly.
yy When your Bluetooth device have been already connected with other unit,
disconnect the Bluetooth connection first. Then you can control your unit
through BT app.
yy Depending on the Bluetooth device, BT app may work restrictively not work.
yy The connection you’ve made may be disconnected if you select other
application or change the setting of the connected device via BT app. In
such case, please check the connection status.
The unit does not
operate normally.
yy In case of malfunction, 1/! button is lit in red and white alternately. Please
use the unit in proper place where the temperature or humidity is not so
high or low.
Above solutions do not
work.
yy Press Reset hole with a pointed thing like mechanical pencil.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 16
2013-05-21
11:47:42
4Appendix
Appendix
17
About 1/! Button’s Condition
Turned on
white
Turned on
red
Turned on
Amber or Green
Turned
off
Beep Sound
Battery
Power
AC Adapter
Condition
Off
Connected
On
Disconnected
On
Connected
Charging
-
Connected
Has a problem with the
battery
Power
AC Adapter
Condition
On
-
Bluetooth paired
Power
AC Adapter
Condition
On
-
Sound Sync disconnected
(On Sound Sync mode)
On
-
Sound Sync connected
Charging
Color
Full charge
Blinks
quickly
Low battery
Full charge
Warning
message
Bluetooth
Color
LG Sound Sync
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 17
Color
4
Appendix
Blinks twice
(Green)
(Green)
Blinks twice
2013-05-21
11:47:43
18
Appendix
Trademarks and
Licenses
Handling the Unit
When shipping the unit
Bluetooth® wireless technology is a system which
allows radio contact between electronic devices
within a max. range of 10 meters.
Connecting individual devices under Bluetooth®
wireless technology does not incur any charges.
A mobile phone with Bluetooth® wireless
technology can be operated via the Cascade if
the connection was made via Bluetooth® wireless
technology.
The Bluetooth® word mark and logos are owned
by the Bluetooth® SIG, Inc. and any use of such
marks by LG Electronics is under license.
4
Other trademarks and trade names are those of
their respective owners.
Appendix
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 18
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
2013-05-21
11:47:43
Appendix
19
Specifications
General
Power requirements
DC 12 V 0 1.5 A
AC adapter requirements
100 - 240 V, 50 / 60 Hz
Power consumption
18 W
Dimensions (W x H x D)
300 mm x 95 mm x 98 mm
Net Weight (Approx.)
1.3 kg
Operating temperature
5 °C to 35 °C
Operating humidity
5 % to 60 %
Inputs
PORT. IN
0.5 Vrms (3.5 mm stereo jack)
Amplifier
10 W X 2 ch (6 Ω at 1 kHz)
Output Power (Battery)
5 W X 2 ch (6 Ω at 1 kHz)
T.H.D
10 %
4
Appendix
Output Power (Adapter)
Speakers
Type
built-in
Impedance Rated
6Ω
Rated Input Power
10 W
Max Input Power
20 W
yy Design and specifications are subject to change without notice.
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 19
2013-05-21
11:47:43
NP6530-B0.BSGPLLK_ENG_MFL67789505.indd 20
2013-05-21
11:47:43
Download PDF