LG | 24LF457A | LG 22LF450A Owner’s Manual

LED TV
LF45**
LF47**
www.lg.com
AAA
: Depending on model / Selon le modèle / Dependendo do modelo /
P/No: MFL68744812 (1503-REV00)
Printed in Korea
i
1
1
2
3
DC-IN
B
(19 V
SERVICE ONLY
HDMI IN
)
USB IN
0.5 A
B
A
ANTENNA
/ CABLE IN
AUDIO OUT
5V
2
LF47**-TA/TB,
LF45**-TA/TB
COMPONENT IN
L
(MONO)
R
AUDIO OUT
COMPONENT IN
A
COMPONENT IN
R
(MONO)
L
(MONO)
R
USB IN
0.5 A
L
5V
L
VIDEO
R
AUDIO
L
VIDEO L (MONO) AUDIO R
R
AUDIO
B
A
L
R
(MONO)
RGB OUT
DC-IN
(19 V
RGB IN (PC)
HDMI IN
)
ANTENNA
/ CABLE IN
AV IN
L
A
R
(MONO)
AUDIO OUT
R
AV IN
L
(MONO)
R
AUDIO OUT
R
R
AUDIO OUT
R
5V
USB IN
0.5 A
UT
L
VIDEO L (MONO) AUDIO R
AUDIO OUT
USB IN
0.5 A
B
5V
LF45**-TG/TI/TJ
R
AUDIO
3
4
2
3
DC-IN
(19V
)
1
5
1
1
2
3
4
2
DC-IN
(19V
)
: Depending on model / Selon le modèle / Dependendo do modelo /
6
A
F
E
B
D
G
C
22LF471A-TA
28LF471A-TA
22LF473A-TB
A
x
B
x
C
(mm)
506 x 354 x 135.8
638 x 430 x 170
506 x 354 x 140.6
A
x
E
x
F
(mm)
506 x 311.7 x 55.8
638 x 389 x 56.8
506 x 311.7 x 55.8
D
(kg)
3.2
4.6
3.2
-
G
D
3.0
(kg)
19 V
4.3
1.5 A
19 V
3.0
2.4 A
19 V
1.5 A
*MFL68744812*
22LF450A-TB
22LF457A-TI
22LF450A-TI
24LF450A-TB
24LF457A-TI
24LF450A-TI
28LF450A-TB
28LF457A-TI
28LF450A-TI
A
x
B
x
C
(mm)
507.6 x 355.9 x 135.8
556 x 384.3 x 135.8
641.5 x 432.0 x 170
A
x
E
x
F
(mm)
507.6 x 315.7 x 53.1
556 x 343.1 x 53.1
641.5 x 395.8 x 57.6
D
(kg)
3.1
3.5
4.5
-
G
2.9
D
(kg)
3.3
19 V
4.2
1.6 A
22LF452A-TA
22LF454A-TG
22LF458A-TJ
24LF452A-TA
24LF454A-TG
24LF458A-TJ
28LF452A-TA
28LF454A-TG
28LF458A-TJ
A
x
B
x
C
(mm)
507.6 x 355.9 x 140.6
556 x 384.3 x 140.6
641.5 x 432.0 x 175
A
x
E
x
F
(mm)
507.6 x 315.7 x 53.1
556 x 343.1 x 53.1
641.5 x 395.8 x 57.6
D
(kg)
3.1
3.5
4.5
-
G
2.9
3.3
4.2
D
(kg)
19 V
1.6 A
OWNER’S MANUAL
Safety and Reference
LED TV*
* Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating your set and
retain it for future reference.
*MFL68662442*
www.lg.com
P/NO : MFL68662442 (1601-REV03)
Printed in Korea
India region only. (Below sentence is not applicable for above 1920 X 1080 resolution TV models.)
ATTENTION:
This product is qualified for the BEE Star rating in the ‘Home’ Mode.
The Objectives of Star Labeling Program is designed to promote energy efficient products and practices.
When the television is initially set up, it is designed to meet the BEE Star Labeling requirements while maintaining optimum picture quality.
• Changes to certain functionalities of this television (TV Guide, Picture/sound etc) may change the power consumption.
• Depending upon such changed setting (eg., Retail mode), the power consumption may vary which possibly could exceed the stated energy
consumption.
To reset the television to Star rating qualified settings, select ‘Home’ mode from the initial set-up procedure in ‘factory settings’ under the
‘Set-up’ menu.
Safety instructions
Please read these safety precautions carefully before using the product.
ENGLISH
WARNING
Make sure to connect Mains cable to compliant AC mains socket with
Grounded earth pin. (Except for devices which are not grounded on
earth.) Otherwise possibility you may be electrocuted or injured.
Do not place the TV and/or remote control in the following
environments:
• A location exposed to direct sunlight
• An area with high humidity such as a bathroom
• Near any heat source such as stoves and other devices that
produce heat
• Near kitchen counters or humidifiers where they can easily be
exposed to steam or oil
• An area exposed to rain or wind
• Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product
deformation.
Do not place the product where it might be exposed to dust. This may
cause a fire hazard.
Mains Plug is the TV connecting/disconnecting device to AC mains
electric supply. This plug must remain readily attached and operable
when TV is in use.
Do not touch the power plug with wet hands. Additionally, if the cord
pin is wet or covered with dust, dry the power plug completely or wipe
dust off. You may be electrocuted due to excess moisture.
Insert power cable plug completely into wall socket otherwise if not
secured completely into socket, fire ignition may break out.
Ensure the power cord does not come into contact with hot objects
such as a heater. This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent
rain from flowing in. This may cause water damaged inside the Product
and could give an electric shock.
When mounting TV onto wall make sure to neatly install and isolate
cabling from rear of TV as to not create possibility of electric shock /
fire hazard.
Do not plug too many electrical devices into a single multiple electrical
outlet. Otherwise, this may result in fire due to over-heating.
3
ENGLISH
Do not drop the product or let it fall over when connecting external
devices. Otherwise, this may result in injury or damage to the product.
Des
Do not drop metallic objects such as coins, hair pins, chopsticks or wire
into the product, or inflammable objects such as paper and matches.
Children must pay particular attention. Electrical shock, fire or injury
can occur. If a foreign object is dropped into the product, unplug the
power cord and contact the service centre.
icca
nt
Keep the anti-moisture packing material or vinyl packing out of the
reach of children. Anti-moisture material is harmful if swallowed. If
swallowed by mistake, force the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can cause suffocation. Keep it out
of the reach of children.
Do not let your children climb or cling onto the TV.
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to ensure that a small child does not
consume them. Please seek Doctor- Medical Attention immediately if
child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/
cutlery/screwdriver) between power cable plug and input Wall Socket
while it is connected to the input terminal on the wall. Additionally,
do not touch the power cable right after plugging into the wall input
terminal. You may be electrocuted. (Depending on model)
Do not put or store inflammable substances near the product. There is a
danger of combustion/explosion or fire due to careless handling of the
inflammable substances.
4
Do not spray water on the product or scrub with an inflammable
substance (thinner or benzene). Fire or electric shock accident can
occur.
Do not allow any impact, shock or any objects to fall into the unit,
and do not drop anything onto the screen. You may be injured or the
product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the
windows and ventilate. It may cause a fire or a burn by a spark.
Do not disassemble, repair or modify the product at your own
discretion. Fire or electric shock accident can occur.
Contact the service centre for check, calibration or repair.
• The product has been impacted by shock
• The product has been damaged
• Foreign objects have entered the product
• The product produced smoke or a strange smell
This may result in fire or electric shock.
Be careful in handling the adapter to prevent any external shocks to it.
An external shock may cause damage to the adapter.
ENGLISH
If any of the following occur, unplug the product immediately and
contact your local service centre.
CAUTION
Install the product where no radio wave occurs.
Unplug the TV from AC mains wall socket if you do not intend to use the
TV for a long period of time. Accumulated dust can cause fire hazard
and insulation deterioration can cause electric leakage/shock/fire.
There should be enough distance between an outside antenna and
power lines to keep the former from touching the latter even when the
antenna falls. This may cause an electric shock.
Apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
Do not install this product on a wall if it could be exposed to oil or oil
mist. This may damage the product and cause it to fall.
If water enters or comes into contact with TV, AC adapter or power
cord please disconnect the power cord and contact service centre
immediately. Otherwise, this may result in electric shock or fire.
Only use an authorized AC adapter and power cord approved by
LG Electronics. Otherwise, this may result in fire, electric shock,
malfunction or product deformation.
Do not install the product on places such as unstable shelves or inclined
surfaces. Also avoid places where there is vibration or where the
product cannot be fully supported. Otherwise, the product may fall or
flip over, which may cause injury or damage to the product.
If you install the TV on a stand, you need to take actions to prevent the
product from overturning. Otherwise, the product may fall over, which
may cause injury.
If you intend to mount the product to a wall, attach VESA standard
mounting interface (optional parts) to the back of the product. When
you install the set to use the wall mounting bracket (optional parts), fix
it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
Never Disassemble the AC adapter or power cord. This may result in fire
or electric shock.
5
ENGLISH
When installing the antenna, consult with a qualified service
technician. If not installed by a qualified technician, this may create a
fire hazard or an electric shock hazard.
When connecting external devices such as video game consoles, make
sure the connecting cables are long enough. Otherwise, the product
may fall over, which may cause injury or damage the product.
We recommend that you maintain a distance of at least 2 to 7 times
the diagonal screen size when watching TV. If you watch TV for a long
period of time, this may cause blurred vision.
Do not turn the product On/Off by plugging-in or unplugging the power
plug to the wall outlet. (Do not use the power plug for switch.) It may
cause mechanical failure or could give an electric shock.
Only use the specified type of battery. This could cause damage to the
remote control.
Please follow the installation instructions below to prevent the product
from overheating.
Do not mix new batteries with old batteries. This may cause the
batteries to overheat and leak.
• The distance between the product and the wall should be more
than 10 cm.
• Do not install the product in a place with no ventilation (e.g., on a
bookshelf or in a cupboard).
• Do not install the product on a carpet or cushion.
• Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Batteries should not be exposed to excessive heat. For example, keep
away from direct Sunlight , open fireplace and electric heaters.
Do not place non-rechargeable batteries in charging device.
Make sure there are no objects between the remote control and its
sensor.
Signal from Remote Control can be interrupted due to external/internal
lighting eg Sunlight, fluorescent lighting. If this occurs turn off lighting
or darken viewing area.
6
Take care not to touch the ventilation openings when watching the TV
for long periods as the ventilation openings may become hot. This does
not affect the operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance
indicates damage or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an exact replacement part
by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet. This may cause
a fire hazard.
When moving the product, make sure you turn the power off first. Then,
unplug the power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire
hazard or cause electric shock.
Do not press strongly upon the panel with a hand or sharp object such
as nail, pencil or pen, or make a scratch on it, as it may cause damage
to screen.
When moving or unpacking the product, work in pairs because the
product is heavy. Otherwise, this may result in injury.
Avoid touching the screen or holding your finger(s) against it for long
periods of time. Doing so may produce some temporary or permanent
distortion/damage to screen.
When cleaning the product and its components, unplug the power
first and wipe it with a soft cloth. Applying excessive force may cause
scratches or discolouration. Do not spray with water or wipe with a wet
cloth. Never use glass cleaner, car or industrial shiner, abrasives or wax,
benzene, alcohol etc., which can damage the product and its panel.
Otherwise, this may result in fire, electric shock or product damage
(deformation, corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not
disconnected from the AC power source even if you turn off this unit
by SWITCH.
When unplugging the cable, grab the plug and unplug it, by pulling at
the plug.
Don’t pull at the cord to unplug the power cord from the power board,
as this could be hazardous.
ENGLISH
Protect the power cord from physical or mechanical abuse, such as
being twisted, kinked, pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and the point where the cord
exits the appliance.
Contact the service centre once a year to clean the internal parts of the
product.
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
If the product feels cold to the touch, there may be a small “flicker”
when it is turned on. This is normal, there is nothing wrong with
product.
The panel is a high technology display product with resolution of two
million to six million pixels. You may see tiny black dots and/or brightly
coloured dots (red, blue or green) at a size of 1 ppm on the panel. This
does not indicate a malfunction and does not affect the performance
and reliability of the product.
This phenomenon also occurs in third-party products and is not subject
to exchange or refund.
7
Preparing
ENGLISH
You may find different brightness and color of the panel depending on
your viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not
related with the product performance, and it is not malfunction.
Displaying a still image for a prolonged period of time may cause image
sticking. Avoid displaying a fixed image on the TV screen for a long
period of time.
Generated sound
“Cracking” noise: A cracking noise that occurs when watching or turning
off the TV is generated by plastic thermal contraction due to temperature and humidity. This noise is common for products where thermal
deformation is required. Electrical circuit humming/panel buzzing:
A low level noise is generated from a high-speed switching circuit,
which supplies a large amount of current to operate a product. It varies
depending on the product.
This generated sound does not affect the performance and reliability
of the product.
NOTE
• Image shown may differ from your TV.
• Your TV’s OSD (On Screen Display) may differ slightly from that
shown in this manual.
• The available menus and options may differ from the input source
or product model that you are using.
• New features may be added to this TV in the future.
• The TV can be placed in standby mode in order to reduce the power
consumption. And the TV should be turned off if it will not be
watched for some time, as this will reduce energy consumption.
• The energy consumed during use can be significantly reduced if the
level of brightness of the picture is reduced, and this will reduce
the overall running cost.
• The items supplied with your product may vary depending on the
model.
• Product specifications or contents of this manual may be changed
without prior notice due to upgrade of product functions.
• For an optimal connection, HDMI cables and USB devices should
have bezels less than 10 mm thick and 18 mm width. Use an
extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
Do not use high voltage electrical goods near the TV (e.g. electric
mosquito-swatter). This may result in product malfunction.
A
A
*A <
= 10 mm
*B <
= 18 mm
• Use a certified cable with the HDMI logo attached.
• If you do not use a certified HDMI cable, the screen may not display
or a connection error may occur. (Recommended HDMI cable types)
-- High-Speed HDMI®/™ cable (3 m or less)
-- High-Speed HDMI®/™ cable with Ethernet (3 m or less)
CAUTION
• Do not use any unapproved items to ensure the safety and product
life span.
• Any damage or injuries caused by using unapproved items are not
covered by the manufacturer’s warranty.
• Some models have a thin film attached on to the screen and this
must not be removed.
• When attaching the stand to the TV set, place the screen facing
down on a cushioned table or flat surface to protect the screen
from scratches.
• Make sure that the screws are inserted correctly and fastened
securely. (If they are not fastened securely enough, the TV may tilt
forward after being installed.) Do not use too much force and over
tighten the screws; otherwise screw may be damaged and not
tighten correctly.
8
Lifting and moving the TV
Cleaning your TV
Please note the following advice to prevent the TV from being scratched
or damaged and for safe transportation regardless of its type and size.
Clean your TV regularly to keep the best performance and to extend the
product lifespan.
• Make sure to turn the power off and disconnect the power cord and
all other cables first.
• When the TV is left unattended and unused for a long time,
disconnect the power cord from the wall outlet to prevent possible
damage from lightning or power surges.
ENGLISH
Maintenance
• It is recommended to move the TV in the box or packing material
that the TV originally came in.
• Before moving or lifting the TV, disconnect the power cord and
all cables.
• When holding the TV, the screen should face away from you to
avoid damage.
Screen, frame, cabinet and stand
To remove dust or light dirt, wipe the surface with a dry, clean, and
soft cloth.
To remove major dirt, wipe the surface with a soft cloth dampened in
clean water or a diluted mild detergent. Then wipe immediately with
a dry cloth.
• Avoid touching the screen at all times, as this may result in damage
to the screen.
• Do not push, rub, or hit the screen surface with your fingernail or a
sharp object, as this may result in scratches and image distortions.
• Do not use any chemicals as this may damage the product.
• Do not spray liquid onto the surface. If water enters the TV, it may
result in fire, electric shock, or malfunction.
Power cord
• Hold the top and bottom of the TV frame firmly. Make sure not to
hold the transparent part, speaker, or speaker grill area.
• When transporting a large TV, there should be at least 2 people.
• When transporting the TV by hand, hold the TV as shown in the
following illustration.
Remove the accumulated dust or dirt on the power cord regularly.
• When transporting the TV, do not expose the TV to jolts or
excessive vibration.
• When transporting the TV, keep the TV upright, never turn the TV
on its side or tilt towards the left or right.
• Do not apply excessive pressure to cause flexing /bending of frame
chassis as it may damage screen.
• When handling the TV, be careful not to damage the protruding
joystick button.
CAUTION
• Avoid touching the screen at all times, as this may result in damage
to the screen.
• Do not move the TV by holding the cable holders, as the cable
holders may break, and injuries and damage to the TV may occur.
9
ENGLISH
Using the joystick button
Mounting on a table
(Image shown may differ from your TV.)
(Image shown may differ from your TV.)
You can simply operate the TV functions, pressing or moving the joystick
button up, down, left or right.
1 Lift and tilt the TV into its upright position on a table. • Leave a 10 cm (minimum) space from the wall for proper
ventilation.
Joystick Button
10 cm
10 cm
10 cm
10 cm
10 cm
Basic Functions
Power On
When the TV is turned off, place your
finger on the joystick button and
press it once and release it.
Power Off
When the TV is turned on, place your
finger on the joystick button and
press it once for a few seconds and
release it. (However, if the Menu
button is on the screen, pressing and
holding the joystick button will let
you exit the Menu.)
Volume
Control
If you place your finger over the
joystick button and move it left or
right, you can adjust the volume
level you want.
If you place your finger over the
Programmes joystick button and move it up or
Control
down, you can scrolls through the
saved programmes you want.
Adjusting the Menu
When the TV is turned on, press the joystick button one time. You can
adjust the Menu items moving the joystick button up, down, left or
right.
Turns the power off.
Clears on-screen displays and returns to TV viewing.
Changes the input source.
Accesses the main menu.
NOTE
• When your finger over the joystick button and push it to the up,
down, left or right, be careful not to press the joystick button. If you
press the joystick button first, you may not be able to adjust the
volume level and saved programmes.
10
2 Connect the power cord to a wall outlet.
CAUTION
• Do not place the TV near or on sources of heat, as this may result in
fire or other damage.
WARNING
If a television is not positioned in a sufficiently stable location, it can
be potentially hazardous due to falling. Many injuries, particularly to
children, can be avoided by taking simple precautions such as:
• Using cabinets or stands recommended by the manufacturer of
the television.
• Only using furniture that can safely support the television.
• Ensuring the television is not overhanging the edge of the
supporting furniture.
• Not placing the television on tall furniture (for example, cupboards
or bookcases) without anchoring both the furniture and the
television to a suitable support.
• Not standing the televisions on cloth or other materials placed
between the television and supporting furniture.
• Educating children about the dangers of climbing on furniture to
reach the television or its controls.
Mounting on a wall
(This feature is not available for all models.)
Attach an optional wall mount bracket at the rear of the TV carefully
and install the wall mount bracket on a solid wall perpendicular to
the floor. When you attach the TV to other building materials, please
contact qualified personnel. LG recommends that wall mounting be
performed by a qualified professional installer. We recommend the use
of LG’s wall mount bracket. LG’s wall mount bracket is easy to move with
cables connected. When you do not use LG’s wall mount bracket, please
use a wall mount bracket where the device is adequately secured to the
wall with enough space to allow connectivity to external devices. It is
advised to connect all the cables before installing fixed wall mounts.
• Image shown may differ from your TV.
The Kensington security system connector is located at the rear of the
TV. For more information of installation and using, refer to the manual
provided with the Kensington security system or visit http://www.
kensington.com. Connect the Kensington security system cable between
the TV and a table.
ENGLISH
Using the kensington security
system
10 cm
10 cm
10 cm
10 cm
Securing the TV to a wall
(This feature is not available for all models.)
Standard dimensions for the wall mount kits are described in the
following table.
Separate purchase (Wall mounting bracket)
1 Insert and tighten the eye-bolts, or TV brackets and bolts on the back
of the TV.
• If there are bolts inserted at the eye-bolts position, remove the
bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-bolts on the rear
of the TV.
3 Connect the eye-bolts and wall brackets tightly with a sturdy rope.
Make sure to keep the rope horizontal with the flat surface.
Model
20/22/24LF45**
22LF47**
24LF51**
28LF44**
28/29LF45**
28LF47**
28LF50**
28LF51**
Wall Mount (mm)
(A x B)
75 x 75
100 x 100
Standard screw
Number of screws
M4 x L10
4
M4 x L10
4
Wall mount bracket
LSW140B
LSW140B
A
B
CAUTION
• Make sure that children do not climb on or hang on the TV.
NOTE
• Use a platform or cabinet that is strong and large enough to
support the TV securely.
• Brackets, bolts and ropes are not provided. You can obtain
additional accessories from your local dealer.
11
Attaching the shelf stand
CAUTION
ENGLISH
• Disconnect the power first, and then move or install the TV.
Otherwise electric shock may occur.
• Remove the stand before installing the TV on a wall mount by
performing the stand attachment in reverse.
• If you install the TV on a ceiling or slanted wall, it may fall and
result in severe injury. Use an authorised LG wall mount and
contact the local dealer or qualified personnel.
• Do not over tighten the screws as this may cause damage to the TV
and void your warranty.
• Any damages or injuries by misuse or using an improper accessory
are not covered by the manufacturer’s warranty.
• Screw length from outer surface of back cover should be under
8 mm.
(Only LF51**)
m
150 m
350 mm
Wall mount Pad
Shelf stand
Back Cover
STB
(Set top box)
Shelf stand conditions of use
Wall mount Pad
Back Cover
Standard screw
: M4 x L10
Max. 8 mm
NOTE
• The wall mount kit includes an installation manual and necessary
parts.
• The wall mount bracket is not provided. You can obtain additional
accessories from your local dealer.
• The length of screws may differ depending on the wall mount.
Make sure to use the proper length.
• For more information, refer to the manual supplied with the wall
mount.
STB Dimensions (W x D)
350 mm x 150 mm
STB Weight
2.5 kg
Maximum supported weight
3.5 kg
How to attach to masonry walls
(Only LF51**)
U se the anchors for wall material of concrete, light concrete, strong
natural stone, soft natural stone masonry brick and hallow block that
do not crack.
Please follow the below direction
(Only LF51**)
-- Check the material of the wall and the thickness of the finishing.
hen installing the product on wall material not designated,
-- W
install the product so that each fixated location can withstand
the pull out load of 70 kgf (686 N) and shear load of 100 kgf (980
N) or above.
-- Use the Ø8 mm drill bit for concrete and hammer (Impact) drill.
12
Connections (notifications)
1
ENGLISH
Connect various external devices to the TV and switch input modes to
select an external device. For more information of external device’s
connection, refer to the manual provided with each device.
Available external devices are: HD receivers, DVD players, VCRs, audio
systems, USB storage devices, PC, gaming devices, and other external
devices.
2
NOTE
Wall mount anchor
3
4
• The external device connection may differ from the model.
• Connect external devices to the TV regardless of the order of the
TV port.
• If you record a TV program on a DVD recorder or VCR, make sure to
connect the TV signal input cable to the TV through a DVD recorder
or VCR. For more information of recording, refer to the manual
provided with the connected device.
• Refer to the external equipment’s manual for operating
instructions.
• If you connect a gaming device to the TV, use the cable supplied
with the gaming device.
Antenna connection
Connect the TV to a wall antenna socket with an RF cable (75 Ω).
Wall mount screw
5
• Use a signal splitter to use more than 2 TVs.
• If the image quality is poor, install a signal amplifier properly to
improve the image quality.
• If the image quality is poor with an antenna connected, try to
realign the antenna in the correct direction.
• An antenna cable and converter are not supplied.
Antenna Booster
6
1 Use a drill bit Ø8 mm to drill a hole for the anchor location within a
depth of 80 mm - 100 mm.
2 Clean the drilled hole.
3 Insert the sealed anchor to the hole. (When inserting the anchor,
use a hammer.)
4 Set the wall mount on the wall by aligning to the location of the
hole. And set the angle adjusting part to face upward.
5 Align the wall mount screw to the hole and tighten it. Then, fasten
the screws at torque of 45 kgf/cm - 60 kgf/cm.
• This feature improves the sensitivity to weak RF Signal
in poor reception areas. LG’s built-in booster is autoactivated at weak signal level. It strengthens signal level
and minimizes picture colour noise.
• This feature is auto-controlled by processor and no user
intervention required.
Adapter connection
(Depending on model)
CAUTION
• Please be sure to connect the TV to the AC-DC power adapter
before connecting the TV’s power plug to a wall power outlet.
Other connections
Connect your TV to external devices. For the best picture and audio
quality, connect the external device and the TV with the HDMI cable.
Some separate cable is not provided.
13
Remote control
FAV
B
(Depending on model)
ENGLISH
The descriptions in this manual are based on the buttons on the remote
control. Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5
V AAA) matching the and ends to the label inside the
compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
C
CAUTION
• Do not mix old and new batteries, as this may damage the remote
control.
• In Analogue TV and some countries, some remote control buttons
may not work.
• The remote control will not be included for all sales market.
Make sure to point the remote control toward the remote control sensor
on the TV.
1
2
B
Adjusts the volume level.
Accesses your favourite programme list.
Selects the sound output.
Mutes all sounds.
Scrolls through the saved programmes.
Moves to the previous or next screen.
A
C
A
FAV
3 Teletext buttons These buttons are used for teletext.
(POWER) Turns the TV on or off.
Returns to the TV viewing from any mode.
Accesses the Quick menus.
1
Changes the image mode. (Depending on model)
1
Selects an AV mode. (Depending on model)
2
Selects an AV mode. (Depending on model)
2
Switches the BOLLYWOOD sound mode.
(Depending on model)
Changes the input source.
Number buttons Enters numbers.
Accesses the saved programme list.
Returns to the previously viewed programme.
14
Accesses the main menus.
Navigation buttons (up/down/left/right) Scrolls through
menus or options.
Selects menus or options and confirms your input.
Returns to the previous level.
Clears on-screen displays and returns to TV viewing.
) Controls the
Control buttons (
ENTERTAINMENT menus.
Coloured buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue)
(
Licenses
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface,
and the HDMI logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it
plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.
com. Find your registration code in the DivX VOD section of your
device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including
premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX,
LLC and are used under license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274.
ENGLISH
Supported licenses may differ by model. For more information about
licenses, visit www.lg.com.
Open source software
notice information
To obtain the source code under GPL, LGPL, MPL, and other open source
licenses, that is contained in this product, please visit http://opensource.
lge.com.
In addition to the source code, all referred license terms, warranty
disclaimers and copyright notices are available for download.
LG Electronics will also provide open source code to you on CD-ROM
for a charge covering the cost of performing such distribution (such
as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date
on which you purchased the product.
Watching TV
Turning the TV on for the first time
When you turn the TV on for the first time, the Initial setting screen
appears. Select a language and customize the basic settings.
1 Connect the power cord to a power outlet. The Power indicator turns
red and the TV switches to Standby mode.
2 In Standby mode, press the power button on the remote control or
local key to turn the TV on. The Initial setting screen appears if you
turn the TV on for the first time.
NOTE
• You can also access Factory Reset by accessing OPTION in the
main menu.
3 Follow the on-screen instructions to customize your TV settings
according to your preferences.
Menu Language
Selects a language to display.
Mode Setting
Selects Home Use for the home
environment.
Time Setting
Sets the time.
Auto Tuning
Scans and saves available
programmes automatically.
15
6 Press the Navigation buttons to scroll to TV System.
NOTE
ENGLISH
• To display images in the best quality for your home environment,
select Home Use.
• Store Demo is suitable for the retail environment.
• If you select Store Demo, any customized settings will switch
back to the default settings of Store Demo in 5 minutes.
4 When the basic settings are complete, press the
7 Press the Navigation buttons to scroll to Band.
8 Press the Navigation buttons to scroll to V/UHF or Cable.
9 Press the Navigation buttons to scroll to Channel.
10 Press the Navigation buttons and then select the desired Channel
number with the Navigation buttons or Number buttons.
11 Press the Navigation buttons to scroll to Search.
.
12 Press the Navigation buttons to scroll and start Searching.
NOTE
• If you do not complete the Initial setting, it will appear whenever
the TV turns on.
• Disconnect the power cord from the power outlet when you do not
use the TV for a long period of time.
13 Press the OK
to store it.
14 When you return to the previous menu, press
.
NOTE
• To store another programme, repeat steps 3 to 13.
5 To turn the TV off, press the power button on the remote control.
Assigning a station name
Watching TV
1 In Standby mode, press
2 Press
You can assign a station name with five characters to each programme
number.
(POWER) to turn the TV on.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
INPUT and select TV.
3 To turn the TV off, press
mode.
(POWER). The TV switches to Standby
2 Press the Navigation buttons to scroll to Manual Tuning.
3 Press the Navigation buttons to scroll to Name.
4 Press the Navigation buttons to scroll to select the position and
make your choice of the second character, and so on. You can use the
alphabet A to Z, the number 0 to 9, +/ -, and blank and press OK .
Managing programmes
5 Press the OK
Automatically setting up programme
to store it.
6 When you return to the previous menu, press
.
Use this to automatically find and store all available programmes.
Fine Tuning
1 Press SETTINGS and the Navigation buttons to scroll to SETUP and
press
.
Normally fine tuning is only necessary if reception is poor.
2 Press the Navigation buttons to scroll to Auto Tuning and press
.
2 Press the Navigation buttons to scroll to Manual Tuning.
3 Press the Navigation buttons to scroll to Start and select Start to
begin auto tuning. The TV scans and saves available programmes
automatically.
4 When you return to the previous menu, press
.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
3 Press the Navigation buttons to scroll to Fine.
4 Press the Navigation buttons to fine tune for the best picture and
sound.
5 Press the OK
to store it.
6 When you return to the previous menu, press
Manually setting up programme
Manual Tuning lets you manually tune and arrange the stations in
whatever order you desire.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
2 Press the Navigation buttons to scroll to Manual Tuning.
3 Press the Navigation buttons to scroll to Storage.
4 Press the Navigation buttons or Number buttons to select the desired
programme number.
5 Press the Navigation buttons to scroll to System.
16
.
Editing your programme list
Using additional options
When a programme number is skipped, it means that you will be unable
to select it using
button during TV viewing.
Adjusting aspect ratio
Resize an image to view at its optimal size by pressing Q.MENU or
accessing Aspect Ratio in the PICTURE menu.
ENGLISH
If you wish to select the skipped programme, directly enter the
programme number with the NUMBER buttons or select it in the
Programme edit menu.
NOTE
• The available ratio varies depending on the input source.
This function enables you to skip the stored programmes.
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
-- 16:9 : Resizes images to fit the screen width.
2 Press the Navigation buttons to scroll to Programme Edit.
3 Edit programmes using the following buttons.
Button
Description
Deletes a programme.
Red button
Press the Red button twice. The selected
programme is deleted, all the following
programmes are shifted up one position.
Moves a programme.
Yellow button
Blue button
-- Just Scan : Displays video images in the original size without
removing parts of the edge of the image. (This function works
in Component/HDMI (720p / 1080i / 1080p) Mode.)
Press the Yellow button again to release this
function.
Selects a programme number to be skipped. Press
the Blue button again to release the skipped
programme.
4 When you return to the previous menu, press
.
Selecting a programme on the programme
list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to desired programme and
press OK .
NOTE
• If you select Just Scan, you may see image noises at the edge of
the original signal.
-- Original : When your TV receives a wide screen signal it will
automatically change to the picture format broadcasted.
(4:3
4:3)
(16:9
16:9)
3 When you return to the previous menu, press LIST.
NOTE
• Y ou may find some blue programmes. They have been set up to be
skipped by auto programming or in the programme edit mode.
• Some programmes with the programme number shown in the
programme list indicate there is no station name assigned.
-- 4:3 : Resizes images to the previous standard 4:3.
17
-- 14:9 : You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is viewed in the
same way as in 4:3, but is moved to the up and down.
Using the input list
Selecting an input source
INPUT to access the input sources.
ENGLISH
1 Press
• The connected device displays on each input source.
2 Press the Navigation buttons or input button to scroll to one of the
input sources and press OK .
-- Zoom : Formats an image to fit the screen width. The top and
bottom of the image may not appear.
* Image shown may differ from your TV.
A Type)
Input List
RGB-PC
AV
HDMI
Input Label
-- Cinema Zoom 1 : Formats an image to the cinemascope ratio,
2.35:1.
To change the ratio of the cinema zoom, press or and its
range is from 1 to 16.
Input List
Component
HDMI
Input Label
• If you enlarge or reduce an image, the image may be distorted.
Using the input list.
Antenna
Exit
Input source
Description
TV
Watch TV over the air and cable broadcast.
AV
Watch video from a VCR or other external
devices.
Changing AV modes
RGB-PC
View a PC display on the screen.
(Depending on model)
Each AV MODE has optimized image and sound settings.
Press AV MODE repeatedly to select an appropriate mode.
Component
Select it when using the DVD or the Digital
(Depending on model) set-top box depends on connector.
Mode
Off
Description
Changes to the previously customized settings.
Cinema
Uses the optimized image and sound settings for a
cinematic look.
Uses the optimized image and sound settings for fast
gaming.
Game
When playing a video game using PlayStation or Xbox.
it is recommended to use the Game mode.
When in Game mode, functions related to picture
quality will be optimized for playing games.
18
Exit
B Type)
AV
NOTE
Antenna
HDMI
Watch video from a HTS or other high
definition devices.
ENTERTAINMENT
Tips for using USB storage devices
(Depending on model)
Connecting USB storage devices
Connect USB storage devices (USB memory) to the TV and use
multimedia features (See “Browsing files” on page 20).
USB IN
Connect a USB flash memory or USB memory card reader to the TV as
shown on the following illustration.
To disconnect a USB storage device,
make sure to end the connection properly to prevent damages to the
TV or files.
1 Press Q.MENU to access the quick menus.
2 Press the Navigation buttons to scroll to Eject and press OK
.
3 Disconnect the USB storage device only when the message says that
it is safe to remove.
CAUTION
• Do not turn the TV off or remove a USB storage device while the
USB storage device is connected to the TV, as this could result in
loss of files or damage to the USB storage device.
• Back up your files saved on a USB storage device frequently, as you
may lose or damage the files and this may be not covered by the
manufacturer’s warranty.
ENGLISH
* Image shown may differ from your TV.
• Only a USB storage device is recognizable.
• If the USB storage device is connected through a USB hub, the
device is not recognizable.
• A USB storage device using an automatic recognition programme
may not be recognized.
• A USB storage device which uses its own driver may not be
recognized.
• The recognition speed of a USB storage device may depend on
each device.
• Please do not turn off the TV or unplug the USB device when
the connected USB storage device is working. When such device
is suddenly separated or unplugged, the stored files or the USB
storage device may be damaged.
• Please do not connect the USB storage device which was artificially
manoeuvred on the PC. The device may cause the product to
malfunction or fail to be played. Never forget to use only a USB
storage device which has normal music files, image files or movie
files.
• Please use only a USB storage device which was formatted as a
FAT16, FAT32, NTFS file system.
• Please connect a USB storage device with the cable offered by the
device maker.
• Some USB storage devices may not be supported or operated
smoothly.
• Be sure to back up important files since data stored in a USB
memory device may be damaged. We will not be responsible for
any data loss.
• If a USB memory device is connected to a USB multi-card reader, its
volume data may not be detected.
• If the USB memory device does not work properly, disconnect and
reconnect it.
• How fast a USB memory device is detected differs from device to
device.
• The recommended capacity is 1 TB or less for a USB external hard
disk and 32 GB or less for USB memory.
• Any device with more than the recommended capacity may not
work properly.
• USB storage devices below USB 2.0 are supported as well. But they
may not work properly in the movie list.
• Maximum of 999 folders or files can be recognized under one
folder.
• If there are a lot of folders or files all within one folder, the device
may not be able to access these properly.
• For external USB HDDs, it is recommended that you use devices
with a rated voltage of less than 5 V and a rated current of less
than 0.5A.
19
ENGLISH
Browsing files
No.
Access the photo, music, or movie lists and browse files.
1
Moves to the upper level folder.
1 Connect a USB storage device.
2
Preview: Displays the thumbnail/folder name of the file in
the selected folder.
2 Press SETTINGS to access the main menus.
3 Press the Navigation buttons to scroll to ENTERTAINMENT and press
OK .
4 Press Navigation buttons to scroll to PHOTO LIST, MUSIC LIST or
MOVIE LIST and press OK .
3
4
5
6
Description
Current page/Total pages.
Total number of marked files.
Contents under the folder focused on 1.
Available buttons on the remote control.
* Image shown may differ from your TV.
Supported file format
Type
Photo
PHOTO LIST
MUSIC LIST
3
PHOTO LIST
3872 x 2592, 2604 KB
1
Baseline : 64 pixel(W) x 64 pixel(H) - 15360
pixel(W) x 8640 pixel(H)
Progressive : 64 x 64 to 1024 x 768
No Marked
Up Folder
2
Up Folder
KY101
KY104
10/12/2015
KY102
09/03/2015
KY105
11/27/2015
GUU
11/27/2015
JMJ005
11/27/2015
JMJ002
11/27/2015
JMJ006
11/27/2015
JMJ003
11/27/2015
JMJ007
11/27/2015
JMJ004
11/27/2015
JMJ008
11/27/2015
ꔉ PopUp Menu
ꔵ Move Page
ꘂ Mark
MUSIC LIST
Music
6
4
Page 1/1
No Marked
DriveA
Title
Duration
5
2
ꕗ
1
5
Exit
3
00:00 / 01:34
Up Folder
ꔉ PopUp Menu
ꔂ Move
ꘂ Mark
Option
3
MOVIE LIST
Top Folder
DriveA
ꔵ Move Page
6
Exit
4
Page 1/1
No Marked
Title
Duration
DriveA
5
2
4 folder(s), 2 file(s)
1
Up Folder
ꔂ Move
ꘂ Mark
20
• You can play JPEG files only.
• Non-supported files are displayed in the form
of predefined icon.
KY103
04/03/2015
ꔂ Move
JPEG
Available size
4
Page 1/1
DriveA
GUU.JPG
MOVIE LIST
Supported file format
ꔉ PopUp Menu
ꔵ Move Page
Exit
6
MP3
Bit rate 32 kbps to 320 kbps
• Sampling rate MPEG1 Layer3 : 32 kHz, 44.1
kHz, 48 kHz
• Sampling rate MPEG2 Layer3 : 16 kHz, 22.05
kHz, 24 kHz
• Sampling rate MPEG2.5 Layer3 : 8 kHz, 11.025
kHz, 12 kHz
Movie
DAT, MPG, MPEG, VOB, AVI, DIVX, MP4, MKV, TS, TRP,
TP, ASF, WMV, FLV, RM, RMVB
Navigation
button
OK
Description
Scrolls through the files.
Views the highlighted file or enters the mark
mode.
Moves to the previous or next page.
FAV
Enters the mark mode.
Menu
Video format : DivX 3.11, DivX 4, DivX 5, DivX 6,
Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, Xvid1.10
beta-1/beta-2, Mpeg-1, Mpeg-2, Mpeg-4, H.264/
AVC, VC1, JPEG, Sorenson H.263
Audio format : Dolby Digital, AAC, Mpeg, MP3,
LPCM, ADPCM, WMA
Bit rate : within 32 kbps to 320 kbps(MP3)
External Subtitle format : *.smi/*.srt/*.su
b(MicroDVD,Subviewer1.0/2.0)/*.ass/*.ssa/*.
txt(TMPlayer)/*.psb(PowerDivX)
ENGLISH
Movie (*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.
vob/*.mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.
wmv/*.flv/*.avi(motion-jpeg)/*.mp4(motionjpeg)/*.mkv(motion-jpeg)/*.rm/*.rmvb)
supporting file
Button
View
Mark All
Close
Description
Views the selected photo.
Selects all files.
Exits the Mark Mode.
NOTE
• Non-supported files are displayed the preview image by icon only
.
• Abnormal files are displayed in the form of bitmap
.
6 The following options are available while viewing photos.
Internal Subtitle format : Only XSUB (It is the
subtitle format used in DivX6 files)
Viewing photos
View image files saved in a USB storage device. The displays on the
screen may differ from the model.
ꔊ
1 Press SETTINGS to access the main menus.
Slide show �
2/13
ꔡ
BGM
�
ꔋ
�
꘩ Option
Hide
2 Press the Navigation buttons to scroll to ENTERTAINMENT and press
OK .
3 Press the Navigation buttons to scroll to PHOTO LIST and press
OK .
4 Press the Navigation buttons to scroll to a folder/file you want and
press OK .
5 View photos by using the following menus buttons.
PHOTO LIST
DriveA
GUU.JPG
3872 x 2592, 2604 KB
Up Folder
ꔂ Move
ꘂ Mark
Page 1/1
Starts or stops a slideshow with selected photos.
Slideshow
BGM
KY103
KY101
04/03/2015
KY104
10/12/2015
KY102
09/03/2015
KY105
11/27/2015
GUU
11/27/2015
JMJ005
11/27/2015
JMJ002
11/27/2015
JMJ006
11/27/2015
JMJ003
11/27/2015
JMJ007
11/27/2015
JMJ004
11/27/2015
JMJ008
11/27/2015
ꔉ PopUp Menu
Description
If there are no selected photos, all photos saved in
the current folder display during a slideshow.
To set a slideshow speed, select Option.
No Marked
Up Folder
Option
Turns the background music on or off. To set the
background music folder, select Option.
Rotates photos clockwise (90°, 180°, 270°, 360°).
NOTE
(Rotate)
ꔵ Move Page
Exit
Hide
• The supported photo size is limited. You
cannot rotate a photo if the resolution of the
rotated width is larger than the supported
resolution size.
Hides the option window.
To display the options, press OK
.
21
Q.MENU options for photo list
Button
1 Press Q.MENU.
A pop-up window will appears.
Navigation
button
ENGLISH
2 Press the Navigation buttons to scroll to Set photo view. and press
OK .
3 Press the Navigation buttons to scroll to one of the following options
and press OK .
Option
Music Folder
Scrolls through the files.
Views the highlighted file or enters the mark
mode.
Moves to the previous or next page.
FAV
Enters the mark mode.
Menu
Set photo view.
Slide Speed
OK
Description
Play
Description
Play with Photo
Selects a slideshow speed (Fast, Normal,
Slow).
Selects a music folder for the background
music.
Set video.
Mark All
Close
Description
Plays the selected music file.
Displays photos during playback.
Selects all files.
Exits the Mark Mode.
6 Control playback by using the following buttons.
Button
Allows you to change Video presets. (See p. 26)
Description
Stops playback.
Set audio.
Plays a music file.
Allows you to change Audio presets. (See p. 29)
Pauses or resumes playback.
Skips to the next file.
Listening to music
Skips to the previous file.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT and press
OK .
or
3 Press the Navigation buttons to scroll to MUSIC LIST and press
OK .
4 Press the Navigation buttons to scroll to a folder/file you want and
press OK .
5 Play music by using the following menus/buttons.
MUSIC LIST
Page 1/1
DriveA
ꕗ
Title
Duration
00:00 / 01:34
Up Folder
ꔂ Move
ꘂ Mark
22
ꔉ PopUp Menu
Option
ꔵ Move Page
Exit
When you press the
button, the previous
music file will be played.
When you press the
button, the next
music file will be played.
EXIT
or
No Marked
When playing,
When you press the EXIT button, only the
music will be stopped and the player will go to
TV viewing.
When using the or
button during
playback a cursor indicating the position can
be played.
Q.MENU options for music list
Button
1 Press Q.MENU.
A pop-up window will appears.
Navigation button
Views the highlighted file or enters the
mark mode.
OK
Allows you to change Audio presets. (See p. 29)
Moves to the previous or next page.
FAV
NOTE
• The TV will not play copy protected files.
• If the TV is not in use for some time during playback, the
information box as a screensaver will appear to prevent image
burn. To return to the Music list screen,
press OK or BACK.
Enters the mark mode.
Menu
Description
Plays the selected movie file.
Play
Once a movie file finishes playing, the next
selected one will be played automatically.
Mark All
Musics
001.mp3
File name
Scrolls through the files.
ENGLISH
Set audio.
Description
Marks all movie files on the screen.
Close
Exits the Mark Mode.
6 Control playback by using the following buttons.
ꕖ 00:53 / 05:31
Time elapsed / Duration
Viewing movies
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT and press
OK .
↓07:10
ꔋ
00:22:05
꘩ Option
3 Press the Navigation buttons to scroll to MOVIE LIST and press
OK .
4 Press the Navigation buttons to scroll to a folder/file you want and
press OK .
Button
Description
Stops the playback.
5 Play movie by using the following menus/buttons.
Plays a video.
MOVIE LIST
Top Folder
DriveA
Page 1/1
No Marked
Title
Pauses or resumes the playback.
Duration
DriveA
Scans backward in a file.
Scans forward in a file.
4 folder(s), 2 file(s)
Q.MENU
Up Folder
ꔂ Move
ꘂ Mark
ꔉ PopUp Menu
ꔵ Move Page
Exit
BACK
EXIT
or
Shows the Option menu.
Hides the menu on the full-sized screen.
Returns to normal TV viewing.
Skips to specific points in a file during
playback. The time of a specific point will
appear on the status bar. In some files, this
function may not work properly.
23
Tips for using playing video files
Some user-created subtitles may not work properly.
Some special characters are not supported in subtitles.
HTML tags are not supported in subtitles.
Subtitles in languages other than the supported languages are
not available.
• Changing font and colour in subtitles is not supported.
• Subtitles in languages other than one specified are not supported.
• Video files with subtitle files of 1 MB or larger may not be played
properly.
• The screen may suffer temporary interruptions (image stoppage,
faster playback, etc.) when the audio language is changed.
• A damaged movie file may not be played correctly, or some player
functions may not be usable.
• Movie files produced with some encoders may not be played
correctly.
• If the video and audio structure of recorded file is not interleaved,
either video or audio is outputted.
• HD videos with a maximum of 1920 x 1080 @ 25/30P or 1280 x 720
@ 50/60P are supported, depending on the frame.
• Videos with resolutions higher than 1920 X 1080 @ 25/30P or 1280
x 720 @ 50/60P may not work properly depending on the frame.
• Movie files other than the specified types and formats may not
work properly.
• Max bit rate of playable movie file is 20 Mbps. (only, Motion JPEG
: 10 Mbps)
• We do not guarantee smooth playback of profiles encoded level 4.1
or higher in H.264/AVC.
• DTS Audio codec is not supported.
• A movie file more than 30 GB in file size is not supported for
playback. The file size limit is dependent on the encoding
environment.
• A DivX movie file and its subtitle file must be located in the same
folder.
• A video file name and its subtitle file name must be identical for it
to be displayed.
• Playing a video via a USB connection that doesn’t support high
speed may not work properly.
• Files encoded with GMC(Global Motion Compensation) and Qpel
(Quarterpel Motion Estimation) may not be played.
• Trick Mode does not support other functions than if video files do
not have index information.
• Video file names that contain special characters may not be
playable.
ENGLISH
• • • • 24
Video options
1 Press Q. MENU to access the Pop-Up menus.
2 Press the Navigation buttons to scroll to Set video play., Set video.
or Set audio. and press OK .
When you select the Set video play.
1 Press the Navigation buttons to scroll to show the Picture Size,
Audio Language, Subtitle.
2 Press the Navigation buttons to scroll to make appropriate
adjustments.
Menu
Description
Picture Size
Selects your desired picture format during
movie play.
Audio Language
Changes the Language Group of the audio
during movie play. Files with a single audio
track cannot be selected.
Subtitle
Language
Turns on/off the subtitle.
Activated for SMI subtitle and can select the
language within the subtitle.
Selects the font for subtitle.
Code Page
Sync
When set to default, same font as general
menu will be used.
Adjusts the time synchronisation of the
subtitle from -10 secs to +10 secs by steps of
0.5 secs during movie play.
Code Page
Latin1
Cyrillic
Thai
Support Language
English, French, Spanish, Portuguese, Bahasa
Malaysia, Bahasa Indonesia
Russian
Thai
Hebrew
Hebrew
Arabic
Arabic, Persian, Kurdish
Vietnam
Vietnamese
NOTE
• Only 10,000 of sync blocks can be supported within the subtitle
file.
• When playing a video, you can adjust the Picture Size by pressing
Q.MENU or accessing Aspect Ratio in the PICTURE menu.
When you select the Set video.
1 Press the Navigation buttons to scroll to make appropriate
adjustments. (See p. 26)
1 Press the Navigation buttons to scroll to show the Sound Mode,
Auto Volume, Balance.
2 Press the Navigation buttons to scroll to make appropriate
adjustments. (See p. 29)
DivX® VOD Guide
DivX® VOD Registration
In order to play purchased or rented DivX® VOD contents, you should
register your device with 10 digit DivX registration code from your
device at www.divx.com/vod.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT and
press OK .
3 Press the Navigation buttons to scroll to DivX(R) VOD and press
OK .
4 Press the Navigation buttons to scroll to Registration and press
OK .
You should deregister your device with 8 digit DivX deregistration code
from your device at www.divx.com/vod.
ENGLISH
When you select the Set audio.
DivX® VOD Deregistration
NOTE
• Once the deregistration is executed, you must register your device
again to see DivX® VOD contents.
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to ENTERTAINMENT and
press OK .
3 Press the Navigation buttons to scroll to DivX(R) VOD and press
OK .
4 Press the Navigation buttons to scroll to Deregistration and press
OK .
5 Press the Navigation buttons to select Yes to confirm.
Deregistration code :
********
Deregister at http://vod.divx.com
Continue with registration?
Yes
No
6 When you are finished, press EXIT. When you return to the previous
menu, press BACK.
5 View the registration code of your TV.
You must register your device to
play DivX(R) protected videos.
Registration code : **********
Register at http://vod.divx.com
Close
6 When you are finished, press EXIT. When you return to the previous
menu, press BACK.
NOTE
• • • • Movie files are supported as follows
Resolution : Under 1920 x 1080 (W x H) pixels
Frame Rate : Under 30 frames/sec
Video Codec : MPEG 1, MPEG 2, MPEG 4, H.264/AVC, DivX
3.11, DivX 4, DivX 5, DivX 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid
1.03, Xvid 1.10-beta1, Xvid 1.10-beta2, JPEG, VC1, Sorenson
H.263/H.264.
25
Customizing TV setting
Customizing settings
SETUP settings
* Image shown may differ from your TV.
ENGLISH
1 Press SETTINGS and the Navigation buttons to scroll to SETUP.
Accessing main menus
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK .
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to one of the following menus
and press OK .
3 Press Navigation buttons to scroll to the setting or option you want
and press OK .
3 When you return to the previous menu, press
SETUP
PICTURE
Move
Sets up and edit
programmes.
Adjusts the image size,
quality, or effect.
AUDIO
Adjusts the sound quality,
effect, or volume level.
TIME
Sets the time, date, or
timer feature.
OPTION
Customizes the general
settings.
LOCK
Locks or unlocks
programmes.
INPUT
Views the input sources
with their labels.
ENTERTAINMENT
Displays photo and play
music, movie, game
(Depending on model)
contents.
The available programme settings are described in the following:
Setting
Description
Auto Tuning
Tunes and stores all available
programmes through antennas inputs.
(See p. 16)
Manual Tuning
Tunes and stores the programmes you
want manually. (See p. 16)
Programme Edit
Edits programmes. (See p. 17)
PICTURE settings
1 Press SETTINGS and the Navigation buttons to scroll to PICTURE.
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK .
3 When you return to the previous menu, press
BACK.
* Image shown may differ from your TV.
PICTURE
Move
Aspect Ratio
ꕊ Energy Saving : Off
: Standard
Picture Mode
: 16:9
Move
•Backlight
100
•Contrast
100
•Brightness
50
•Sharpness
20
•Colour
55
•Tint
OK
OK
0
R
G
• Colour Temperature C20
W
C
•Advanced Control
•Reset
26
OK
Programme Edit
Description
SETUP
Move
Auto Tuning
Manual Tuning
4 When you are finished, press EXIT.
Menu
BACK.
* Image shown may differ from your TV.
OK
The available picture settings are described in the following.
Setting
Aspect Ratio
Description
(Depending on model)
Setting
Description
Customizes the PC display options in RGB mode.
Changes the image size to view images at its
optimal size. (See p. 17)
Sets the desired resolution.
Option
Off
Energy Saving
Resolution
The Energy Saving is off
Minimum/
Medium/
Maximum
Selects the brightness level.
Screen off
The screen turns off in 3
seconds.
NOTE
• When you select Screen Off, the screen
will be turned off in 3 seconds and Screen
Off will start.
• If you adjust “Energy Saving- Maximum”,
Backlight feature will not work.
Selects one of the preset image or customizes
options in each mode for the best TV screen
performance. You are also able to customize
advanced options of each mode.
ENGLISH
Option
Reduces the power consumption by adjusting
the screen brightness.
Screen
(RGB-PC)
Options may only be selected
when the PC resolution is set to
1024 x 768 @ 60 /
1280 x 768 @60 /
1360 x 768 @ 60 /
1366 x 768 @ 60 (default).
Auto
config.
Sets to adjust the screen
position, clock, and phase
automatically. The displayed
image may be unstable for
a few seconds while the
configuration is in progress.
Position/
Size/Phase
Adjusts the options when the
picture is not clear, especially
when characters are shaky,
after the auto configuration.
Reset
Restores the options to the
default setting.
Mode
Picture Mode
Vivid
Adjusts the video image
for the retail environment
by enhancing the contrast,
brightness, colour, and
sharpness.
Standard
Adjusts the image for the
normal environment.
Cinema
Optimizes the video images
for a cinematic look to enjoy
movies as if you are in a movie
theatre.
Soccer /
Cricket
(Depending
on model)
Optimizes the video image for
high and dynamic actions by
emphasizing primary colours
such as white, grass, or sky
blue.
Game
Optimizes the video image for
a fast gaming screen such as
PCs or games.
27
Basic image options
Advanced image options (Depending on model)
ENGLISH
Setting
Description
Backlight
Adjusts the brightness of the screen
by controlling the LCD backlight. If
you decrease the brightness level, the
screen becomes darker and the power
consumption will be reduced without
any video signal loss.
Contrast
Increases or decreases the gradient
of the video signal. You may use
Contrast when the bright part of the
picture is saturated.
Brightness
Adjusts the base level of the signal in
the picture.
Sharpness
Adjusts the level of crispness in the
edges between the light and dark
areas of the picture. The lower the
level, the softer the image.
Colour
Tint
Setting
Description
Dynamic Contrast
Adjusts the contrast to keep it at the best
level according to the brightness of the
screen. The picture is improved by making
bright parts brighter and dark parts darker.
Dynamic Colour
Adjusts screen colours so that they look
livelier, richer and clearer. This feature
enhances hue, saturation and luminance
so that red, blue and green white look
more vivid.
Noise Reduction
Reduces screen noise without compromising
video quality.
You can adjust brightness of dark area and
middle gray level area of the picture.
Gamma
Adjusts intensity of all colours.
Adjusts the balance between red and
green levels.
S ets black level of the screen to proper level.
This function is available in the following
modes: RF, AV or HDMI.
Adjusts the overall tone of the screen
as desired.
Colour Temperature
Advanced Control
Reset
Set to warm to enhance hotter colours
such as red, or set to cool to see less
intense colours with more blue.
Black Level
Customizes the advanced options.
Restores the options of each mode to
the factory default.
• Low: Make the dark and middle gray
level areas brighter.
• Medium: Express the original picture
level.
• High: Make the dark and middle gray
level area darker.
Motion Eye Care
Film Mode
• Low: The reflection of the screen gets
darker.
• High: The reflection of the screen gets
brighter.
Adjusts screen brightness to prevent eye
glare.
Makes video clips recorded in film look more
natural.
This feature operates only in 480i / 576i /
1080i Resolution.
Advanced control
Colour Gamut
Edge Enhancer
Maximizes the utilization of colour to
increase colour quality.
• Standard: Displays standard set of
colours.
• Wide: Increase number of colours used.
Shows clearer and distinctive yet natural
edges of the video.
NOTE
• Depending on input signal or other picture settings, the range of
detailed items for adjustment may differ.
28
AUDIO settings
Setting
1 Press SETTINGS and the Navigation buttons to scroll to AUDIO.
Selects one of the preset sound modes or
customizes options in each mode.
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK .
* Image shown may differ from your TV.
AUDIO
Move
Auto Volume
Balance
Sound Mode
Move
: On
0
L
OK
OK
R
: Standard
•Treble
50
•Bass
50
Music/
Bollywood
(depending
on model)
Select when you listen to
music.(Bollywood is india
special music mode)
Soccer / Cricket
(Depending on
model)
: On
Sound Mode
Game
The available audio settings are described in the following.
Setting
Auto Volume
Balance
Select when you watch
movies.
Cinema
•Reset
TV Speaker
Standard
Select when you want
standard-quality sound.
ENGLISH
Mode
BACK.
3 When you return to the previous menu, press
Description
Select when you watch
sports events.
Select when you play
games.
Option
Activates the Auto Volume feature to keep the
volume level consistent whenever you change
programmes. The volume level may not be
consistent due to different signal conditions of
broadcasting stations.
Treble
Controls the dominant
sounds in the output. When
you turn up the treble, it
will increase the output to
the higher frequency range.
Adjust balance between the left and right
speakers according to your room environment.
Bass
Controls the softer sounds in
the output. When you turn
up the bass, it will increase
the output to the lower
frequency range.
Reset
Resets the sound mode to
the default setting.
Description
TV Speaker
Turns off the internal speaker of the TV when
using an external Hi-Fi system.
This feature may not be applied based on country broadcasting
circumstance.
Stereo/Dual Reception
When a programme is selected, the sound information for the station
appears with the programme number and station name.
Press I/II button to select the Multi Audio menu.
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
NICAM
DUAL I , DUAL II , DUAL I + II
NICAM
29
yyMono sound selection
If the stereo signal is weak in stereo reception, you can switch to
mono. In mono reception, the clarity of sound is improved.
ENGLISH
yyLanguage selection for dual language broadcast
If a programme can be received in two languages (dual
language), you can switch to DUAL I, DUAL II or DUAL I+II.
DUAL I
DUAL I I
DUAL I+I I
Sends the primary broadcast language to the
loudspeakers.
Sends the secondary broadcast language to the
loudspeakers.
Sends a separate language to each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM reception, high quality
NICAM (Near Instantaneous Companding Audio Multiplex) digital sound
can be received.
Sound output can be selected according to the type of broadcast
received.
1 When NICAM mono is received, you can select NICAM MONO or
FM MONO.
TIME settings
1 Press SETTINGS and the Navigation buttons to scroll to TIME.
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK .
3 When you return to the previous menu, press
TIME
Move
Move
NICAM DUAL II or NICAM DUAL I+II or FM MONO.
Off Time
: Off
On Time
: Off
Sleep Timer
Automatic Standby
Auto Off(On Time)
: Off
Clock
Audio signal from audio L input is sent to left and right
loudspeakers.
Audio signal from audio R input is sent to left and right
loudspeakers.
R+R:
30
Description
Sets the time.
Sets the time to turn on or off the TV
automatically. To use this function, you
should set the current time and date in
advance.
Off Time /
On Time
Select the sound output.
L+L:
: Off
Setting
In AV, Component, HDMI mode, you can select output sound for the left
and right loudspeakers.
Audio signal from audio L input is sent to the left
loudspeaker and audio signal from audio R input is sent
to the right loudspeaker.
: 4 hours
The available time settings are described in the following.
Speaker Sound Output Selection
L+R:
OK
OK
Clock
2 When NICAM stereo is received, you can select NICAM STEREO or
FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When NICAM dual is received, you can select NICAM DUAL I,
BACK
* Image shown may differ from your TV.
Sleep Timer
Automatic
Standby
(Depending on
model)
NOTE
• If you do not press any button within 2
hours after the TV turns on by the On
Time feature, the TV enters the Standby
mode automatically.
• If you set both Off Time and On Time
features to the same time, the Off Time
feature overrides the On Time feature.
Sets the length of time until the TV to turns
off. When you turn the TV off and turn it
on again, the Sleep Timer feature will be
set to off.
If you do not press any button on the TV or
remote control for a certain period, the TV
will automatically switch to standby mode.
Auto Off(On Time) If On Time is enabled, the TV will be turned
on at the specified time. If you do not operate
(Depending on
the TV for two hours, the TV will be turned off
model)
automatically.
LOCK settings
1 Press SETTINGS and the Navigation buttons to scroll to OPTION.
1 Press SETTINGS and the Navigation buttons to scroll to LOCK.
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK .
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK .
3 When you return to the previous menu, press
BACK.
3 When you return to the previous menu, press
* Image shown may differ from your TV.
OPTION
ENGLISH
OPTION settings
BACK.
* Image shown may differ from your TV.
Move
Move
OK
OK
Menu Language
LOCK
Move
Move
Lock System
Input Label
OK
OK
: Off
Set Password
Factory Reset
: Home Use
Block Programme
Input Block
The available option settings are described in the following.
Setting
Menu Language
Input Label
Factory Reset
Description
Selects a desired language.
Indicates which device is connected to which
input port.
Customizes the TV settings to suit your
preference. The initial setup screen will
appear when you turn on the TV for the
first time.
Home Use
Selects it for the Home
environment.
Store Demo
Selects it for the retail
environment.
The available lock settings are described in the following.
Setting
Description
Lock System
Activates or deactivates the lock system.
Set Password
Changes the 4-digit password. The
default PIN is “0 0 0 0”.
Block Programme
Input Block
Blocks the programmes that contain
inappropriate contents for children
by pressing the Blue button. The Lock
icon appears in front of the blocked
programmes. The programmes can be
selected but the screen blank and the
audio is muted.
Blocks the input sources.
31
Teletext
ENTERTAINMENT settings
1 Press SETTINGS and the Navigation buttons to scroll to
ENTERTAINMENT.
ENGLISH
2 Press the Navigation buttons to scroll to the setting or option you
want and press OK .
3 When you return to the previous menu, press
BACK.
* Image shown may differ from your TV.
ENTERTAINMENT
Move
Move
OK
OK
Photo List
Music List
Movie List
DivX(R) VOD
Game
* This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives upto-the minute information on news, weather, television programmes,
share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE and FASTEXT
systems. SIMPLE (standard teletext) consists of a number of pages
which are selected by directly entering the corresponding page
number. FASTEXT are more modern methods allowing quick and easy
selection of teletext information.
Switch On/Off
Press the TEXT button to switch to teletext. The initial page or last page
viewed appears on the screen.
The available entertainment settings are described in the following.
Two page numbers, TV station name, date and time are displayed on
the screen headline. The first page number indicates your selection,
while the second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode
reappears.
Setting
Description
Photo List
Views image files(photos) on TV which
are stored on USB device. (See p. 21)
Music List
Plays back music files on TV which are
stored on USB device. (See p. 22)
Simple text
Movie List
Plays movie files on TV which are
stored on usb device. (See p. 23)
Page selection
DivX(R) VOD
Views the registration code of your TV.
(See p. 25)
Game
(Depending on model)
Plays game contents on your TV.
1 Enter the desired page number as a three digit number with the
Number buttons. If during selection you press a wrong number, you
must complete the three digit number and then re-enter the correct
page number.
2 The
button can be used to select the preceding or
following page.
Fastext
The teletext pages are colour coded along the bottom of the screen
and are selected by pressing the corresponding coloured button.
Page selection
1 Press the INDEX button to select the index page.
2 You can select the pages which are colour coded along the bottom
line with corresponding coloured buttons.
3 As with SIMPLE teletext mode, you can select a page by entering
its three digit page number with the Number buttons in FASTEXT
mode.
4 The
button can be used to select the preceding or
following page.
32
Special teletext function
Index
Time
When viewing a TV programme, select this menu to display the time at
the top right hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The
sub page number is displayed at the bottom of the screen. To hold or
change the sub page, press the Red/Green,
or Number buttons.
Hold
Stops the automatic page change which will occur if a teletext page
consists of 2 or more sub pages.
The number of sub pages and the sub page displayed is, usually, shown
on the screen below the time. When this menu is selected the stop
symbol is displayed at the top left-hand corner of the screen and the
automatic page change is inactive.
Reveal
Select this menu to display concealed information, such as solutions to
riddles or puzzles.
Update
Displays the TV picture on the screen while waiting for a new teletext
page. The display will appear at the top left hand corner of the screen.
When the updated page is available then display will change to the
page number. Select this menu again to view the updated teletext page.
Cannot control the TV with the remote control.
• Check the remote control sensor on the product and try again.
• Check if there is any obstacle between the product and the remote
control.
• Check if the batteries are still working and properly installed (
to , to ).
ENGLISH
Select the each index page.
Troubleshooting
No image display and no sound is produced.
• Check if the product is turned on.
• Check if the power cord is connected to a wall outlet.
• Check if there is a problem in the wall outlet by connecting other
products.
The TV turns off suddenly.
• Check the power control settings. The power supply may be
interrupted.
• Check if the Automatic Standby (Depending on model) / Sleep
Timer / Off Time is activated in the TIME settings.
• If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
• If On Time is enabled, the TV will be turned on at the specified
time. If you do not operate the TV for two hours, the TV will be
turned off automatically. To disable this function, use your remote
control to go to SETTINGS TIME Auto Off(On Time)
(Depending on model) Off.
When connecting to the PC (HDMI/RGB), ‘No signal’ or ‘Invalid Format’
is displayed.
• Turn the TV off/on using the remote control.
• Reconnect the HDMI/RGB cable.
• Restart the PC with the TV on.
33
Specifications
Component port connecting information
(Depending on model)
Component ports on the TV
ENGLISH
Operating
Temperature
Environment
condition
Operating
Humidity
Less than 80 %
Storage
Temperature
-20 °C to 60 °C
Storage
Humidity
Less than 85 %
Analogue TV
(Depending on Country)
Television system
PAL/SECAM-B/G/D/K, PAL-I,
NTSC-M, PAL B/B
Programme coverage
VHF, UHF, CATV
Maximum number of
storable programmes
200
External antenna
impedance
75 Ω
Video output ports on DVD player
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(Only 50 Hz / 60 Hz )
RGB (PC) supported mode
(Depending on model)
HDMI (DTV) supported mode
34
Y
0 °C to 40 °C
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480
31.469
31.5
59.94
60.00
720 x 576
31.25
50.00
1280 x 720
44.96
45
37.5
59.94
60.00
50.00
1920 x 1080
28.125
33.72
33.75
56.25
67.43
67.5
27
33.75
26.97
33.716
50.00
59.94
60.00
50.00
59.94
60.00
24.00
30.00
23.97
29.976
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 480
31.469
59.940
800 x 600
37.879
60.317
1024 x 768
48.363
60
1280 x 720
47.770
59.850
1152 x 864
54.340
60.050
1366 x 768
47.710
59.790
NOTE
• The optimal display resolution
-- 1366 x 768 @ 60 Hz.
• The optimal timing in each mode is vertical frequency 60 Hz.
AC-DC adaptor
22LF47**
ENGLISH
Manufacturer : Lien Chang
Model : LCAP21C
Manufacturer : APD
Model : WA-40D19FI
Input: AC 100-240 V~ 50/60 Hz
Output: 19 V 2.1 A
Manufacturer : Lien Chang
Model : LCAP21A
Manufacturer : APD
Model : WA-32C19FI
Input: AC 100-240 V~ 50/60 Hz
Output: 19 V 1.7 A
28LF47**, 29LF45**
Manufacturer : Lien Chang
Model : LCAP35
Manufacturer : APD
Model : DA-48F19
Input: AC 100-240 V~ 50/60 Hz
Output: 19 V 2.53 A
20/22/24LF45**, 24LF51**
Manufacturer : Lien Chang
Model : LCAP16A-E, LCAP16A-A, LCAP21A
Manufacturer : APD
Model : WA-32C19FI, DA-32F19
Manufacturer : Honor
Model : ADS-40FSG-19 19032GPG,
ADS-40FSG-19 19032GPCU,
ADS-45EI-19 19032GPI
ADS-40LSI-19-2 19032G
ADS-40SG-19-3 19032G
Input: AC 100-240 V~ 50/60 Hz
Output: 19 V 1.7 A
28LF44**, 28LF45**, 28LF50**, 28LF51**
Manufacturer : Lien Chang
Model : LCAP16B-E, LCAP16B-A, LCAP21C
Manufacturer : APD
Model : WA-40D19FI, DA-40I19
Manufacturer : Honor
Model : ADS-45FSN-19 19040GPG,
ADS-45FSN-19 19040GPCU,
ADS-45EI-19 19040GPI
ADS-40LSI-19-2 19040G
ADS-45SN-19-3 19040G
Input: AC 100-240 V~ 50/60 Hz
Output: 19 V 2.1 A
35
Environmental Information
(India region only)
ENGLISH
Disposal of your old appliance (as per e-waste Rules)
1. When this crossed out wheeled bin symbol is depicted on the product and its operator’s manual, it means the product is
covered by the e-waste Management and Handling Rules, 2011 and are meant to be recycled, dismantled, refurbished or
disposed off.
2. Do’s :
a. The product is required to be handed over only to the authorized recycler for disposal.
b. Keep the product in isolated area, after it becomes non-functional/unrepairable so as to prevent its accidental breakage.
Don’t :
a. The product should not be opened by the user himself/herself, but only by authorized service personnel.
b. The product is not meant for re-sale to any unauthorized agencies/scrap dealer/kabariwalah.
c. The product is not meant for mixing into household waste stream.
d. Do not keep any replaced spare part(s) from the product in exposed area.
3. Any disposal through unauthorized agencies/person will attract action under Environment (Protection) Act 1986.
4. “This product is complied with the requirement of Hazardous Substances as specified under Rule 13 (1) & (2) of the E-Waste (Management &
Handling) Rules, 2011.”
5. To locate a nearest collection centre or call for pick-up (limited area only) for disposal of this appliance, please contact Toll Free No. 1800-315LGE
Internal Use
Only
9999
/ 1800-180-9999
for details.
All collection centre and pick up facilities are done by third parties with LG Electronics India Pvt. Ltd.
Merely as a facilitator. For more detailed information, please visit : http://www.lge.com/in.
LGE Internal Use Only
sentence
E _ Provided sentence
( ( --
“
,
.
-
36
)
)
Record the model number and serial number
of the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
MODEL
SERIAL
Download PDF

advertising