LG | 32LV3100 | LG 32LV3100 Owner’s Manual

OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
www.lg.com
HDMI, the HDMI logo and High-Definition Multimedia Interface
are trademarks or registered trademarks of HDMI Licensing LLC.
CONTENTS
PREPARATION
Accessories...................................................... A-1
Antenna Connection.............................................1
Connecting with a Component cable ................2
Connecting with a HDMI cable............................3
Connecting with a HDMI to DVI cable.................4
Usb setup.............................................................4
Connecting with a RCA cable..............................5
Connecting with a RF Cable................................6
External stereo setup...........................................6
Connecting with a D-sub 15 pin cable.................7
Supported display resolution................................8
Screen Setup for PC mode..................................9
WATCHING TV / PROGRAMME CONTROL
Turning on the TV..............................................13
Initializing Setup ................................................13
Programme Selection.........................................13
Volume Adjustment............................................13
Quick Menu........................................................14
On Screen Menus Selection and adjustment....15
Auto programme tuning ....................................16
Manual programme Tuning................................17
Programme Edit ................................................19
Selecting the Programme List............................21
Favourite programme setup...............................22
Input List.............................................................23
Input Label.........................................................24
SIMPLINK...........................................................25
AV Mode.............................................................28
Initializing (Reset to original factory settings)....29
Key Lock............................................................30
When connecting a USB device........................31
Photo list.............................................................33
Music list.............................................................37
Movie list............................................................40
DivX Registration Code......................................44
Deactivation........................................................45
CONTENTS
EXTERNAL EQUIPMENT SETUP
TO USE A USB DEVICE
PICTURE CONTROL
Picture Size (Aspect Ratio) Control...................46
Energy Saving....................................................48
Preset Picture Settings......................................49
Manual Picture Adjustment................................50
Picture Improvement Technology.......................51
Expert picture control.........................................52
Picture Reset......................................................55
Power Indicator..................................................56
Demo Mode........................................................57
Mode Setting......................................................58
SOUND & LANGUAGE CONTROL
Auto Volume Leveler..........................................59
Clear Voice II......................................................60
Preset Sound Settings-Sound Mode.................61
Sound Setting Adjustment -User Mode.............62
Infinite Surround.................................................63
Balance..............................................................64
TV Speakers On/ Off Setup...............................65
Audio Reset........................................................66
I/II.......................................................................67
Stereo/Dual Reception.......................................67
NICAM Reception..............................................68
Speaker Sound Output Selection......................68
On-Screen Menu Language Selection..............69
I
CONTENTS
TIME SETTING
CONTENTS
Clock Setup........................................................70
Auto on/off time setting......................................71
Sleep Timer setting............................................71
TELETEXT
Switch on/off .....................................................72
SIMPLE Text......................................................72
TOP Text............................................................72
FASTEXT...........................................................73
Special Teletext Functions.................................73
APPENDIX
Troubleshooting..................................................74
Maintenance.......................................................76
Product Specifications ......................................77
IR Codes............................................................79
External Control Device Setup...........................80
II
PREPARATION
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please
contact the dealer where you purchased the TV.
■ Image shown may differ from your TV.
Polishing Cloth
Polishing cloth for use on the screen.
* Lightly wipe any stains or fingerprints on
the surface of the TV with the polishing
cloth.
Owner’s Manual
Power Cord
(Except 32LV2***,
32/42LV3***)
Batteries
(AAA)
Remote Control
PREPARATION
This item is not included for all models.
Do not use excessive force. This may
cause scratching or discolouration.
Only 26/32LK3**, 32/42LK4**
x8
1-screw for stand fixing
(Only 26/32LK3**, 32/42LK4**,
32LV2***, 32LV3***)
Only 22LK3**
Cable Holder
(Only 22LK3**,
19/22/26LV2***)
M4 x 20
Bolts for stand
assembly
Only 19/22/26LV2***
Protection cover
Only 32LV2***
x2
Protection cover
or
Only 32/42LV3***
x8
M4 x 16
Bolts for stand
assembly
AC/DC Adaptor
M4 x 14
Bolts for stand
assembly
x8
M4 x 12
Bolts for stand
assembly
Wall Mounting Bracket (Separate purchase)
LSW100B or LSW100BG
LSW200B or LSW200BG
LSW400BX or LSW400BXG
(22/26/32LK3**, 32LK4**,
19/22/26/32LV2***,
32LV3***)
(42LK4**)
(42LV3***)
A-1
PREPARATION
!
FRONT
PANEL CONTROLS
! NOTE
► ►The energy consumed during use can be significantly reduced if the level of brightness of the picture is
? reduced, and this will reduce the overall running cost.
PREPARATION
?
CAUTION
► ►Do not step on the glass stand or subject it to any impact.
It may break, causing possible injury from fragments of glass, or the TV may fall.
► ►Do not drag the TV. The floor or the product may be damaged.
P
■ Image shown may differ from your TV.
Only 22/26/32LK3**
Only 22LK3**
P
POWER
INPUT
INPUT
INPUT
HOME
HOME
HOME
OK
OK
OK
VOLUME
PROGRAMME
P
P
Only 26/32LK3**
P
INPUT
HOME
OK
P
PROGRAMME
P
INPUT
VOLUME
SPEAKER
ME
OK
OK
HOME
HOME
Remote Control Sensor
UT
Power/Standby Indicator
(Can be adjusted using the Power Indicator in the OPTION menu.)
A-2
OK
HOME
INPUT
INPUT
INPUT
POWER
HOME
OK
■ Image shown may differ from your TV.
Only 32/42LK4**
P
PROGRAMME
PREPARATION
P
OK
HOME
P
VOLUME
INPUT
OK
OK
SPEAKER
HOME
OK
HOME
Remote Control Sensor
INPUT
HOME
INPUT
INPUT
POWER
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.)
A-3
PREPARATION
FRONT PANEL CONTROLS
■ Image shown may differ from your TV.
Only 19/22/26/32LV2***
PREPARATION
PROGRAMME
VOLUME
OK
HOME
INPUT
POWER
Touch Sensor
• You can use the desired
button function by
touching.
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power Indicator
in the OPTION menu.)
A-4
■ Image shown may differ from your TV.
Only 32/42LV3***
PROGRAMME
PREPARATION
P
VOLUME
OK
OK
SPEAKER
HOME
HOME
INPUT
INPUT
POWER
Remote Control Sensor
Power/Standby Indicator
(Can be adjusted using the Power Indicator in the OPTION menu.)
OPTICAL
DIGITAL
AUDIO OUT
(RGB/DVI)
AUDIO IN
1
VIDEO
RGB IN (PC)
A-5
L
IN
/DVI IN
ANTENNA
IN
AUDIO
VIDEO
COMPONENT IN
PREPARATION
BACK PANEL INFORMATION
■ Image shown may differ from your TV.
Only 22LK3**
Only 26/32LK3**
26/32LD340
10
RS-232C IN
(CONTROL)
RGB IN (PC)
VIDEO
L/MONO AUDIO
/DVI IN
1
1
R
AV IN1
PREPARATION
10
1
3
4
5
8
1
2
3
6
7
2
9
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
4
RGB Input
Connect the output from a PC.
5
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
7
ANTENNA
IN
AUDIO
VIDEO
COMPONENT IN
2
A-6
AUDIO IN
(RGB/DVI)
2
3
4
AV IN2
5
6
8
7
9
6
RGB/DVI Audio Input
Connect the audio from a PC.
7
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
8
Component Input
Connect a component video/audio device to these
jacks.
9
Antenna Input
Connect RF antenna to this jack.
10
USB Input
Connect USB storage device to this jack.
USB IN
BACK PANEL INFORMATION
■ Image shown may differ from your TV.
Only 32/42LK4**
H/P HDMI IN 3
2
4
6
3
8
7
2
VIDEO L/MONO AUDIO R
1
PREPARATION
10
AV IN 2
OUT
2
(RGB)
(DVI)
9
5
1
2
3
4
5
Power Cord Socket
This TV operates on an AC1 power. The voltage is
indicated on the Specifications page. Never
HDMI / DVI IN
attempt to operate the TV on DC
power.
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
RGB Input
Connect the output from a PC.
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
6
RGB/DVI Audio Input
Connect the audio from a PC.
7
Audio/Video Input
ANTENNA IN
Connect audio/video output from an external
device to these jacks.
8
Component Input
Connect a component video/audio device to these
jacks.
9
Antenna Input
Connect RF antenna to this jack.
10
USB Input
Connect USB storage device to this jack.
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
A-7
PREPARATION
■ Image shown may differ from your TV.
Only 19/22/26LV2***
Only 32LV2***
PREPARATION
9
9
1
1
10
2
5
6
3
7
1
2
5
6
3
7
DC-IN
2
(DVI)
2
4
1
RGB Input
Connect the output from a PC.
3
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
5
A-8
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
2
4
8
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
RGB/DVI Audio Input
Connect the audio from a PC.
(DVI)
4
8
6
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
7
Component Input
Connect a component video/audio device to these
jacks.
8
Antenna Input
Connect RF antenna to this jack.
9
USB Input
Connect USB storage device to this jack.
10
DC ADAPTER PORT
Connect to the power cord socket.
■ Image shown may differ from your TV.
Only 32/42LV3***
1
2
5
2
6
3
PREPARATION
9
7
(DVI)
8
4
1
HDMI Input
Connect an HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
2
RGB Input
Connect the output from a PC.
3
RS-232C Input (CONTROL&SERVICE) Port
Connect to the RS-232C port on a PC.
This port is used for Service or Hotel mode.
4
Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
5
RGB/DVI Audio Input
Connect the audio from a PC.
6
Audio/Video Input
Connect audio/video output from an external
device to these jacks.
7
Component Input
Connect a component video/audio device to these
jacks.
8
Antenna Input
Connect RF antenna to this jack.
9
USB Input
Connect USB storage device to this jack.
A-9
PREPARATION
STAND INSTALLATION
■ ■ Image shown may differ from your TV.
■ ■ When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully,
the product can tilt forward after the product installation.) If you tighten the bolt with excessive force, the
bolt can deviate from abrasion of the tightening part of the bolt.
PREPARATION
Only 22LK3**
1
2
Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
Only 26/32LK3**, 32/42LK4**
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the Stand Body with
the Stand Base of the TV
Assemble the TV as shown.
Stand Body
M4 x 20
Stand Base
3
Assemble the TV as shown.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
M4 x 20
A-10
Only 19/22/26LV2***
Only 32LV2***
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the parts of the Stand Body with
the Stand Base of the TV
2
Assemble the parts of the Stand Body with
the Stand Base of the TV
Stand Body
M4 x 14
Stand Body
Stand Base
Stand Base
3
Assemble the TV as shown.
3
Assemble the TV as shown.
4
Fix the 2 bolts securely using the holes in the
back of the TV.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
M4 x 16
PREPARATION
1
M4 x 14
A-11
PREPARATION
BACK COVER FOR WIRE
1 Carefully place the TV screen side down on a ARRANGEMENT
Only 32/42LV3***
cushioned surface to protect the screen from ■ Image shown may differ from your TV.
damage.
Only 22LK3**
PREPARATION
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
2
Assemble the parts of the Stand Body with
the Stand Base of the TV
M4 x 12
Stand Base
3
Cable Holder
Stand Body
Only 19/22/26LV2***
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
Assemble the TV as shown.
Cable Holder
4
Fix the 4 bolts securely using the holes in
the back of the TV.
Only 32LV2***
Gather and bind the cables with the Cable Holder
on the TV back cover.
M4 x 12
Cable Holder
A-12
Only 26/32LK3**, 32/42LK4**
1
Connect the cables as necessary.
After Connecting the cables as necessary, install
CABLE HOLDER as shown and bundle the cables.
PREPARATION
To connect additional equipment, see the
External Equipment Setup section.
Only 32/42LV3***
Cable Holder
2
Open the Cable Management Clip as
shown and manage the cables.
Cable Management Clip
3
Fit the Cable Management Clip as shown.
! NOTE
► ►Do not use the Cable Management Clip to lift the TV.
-If the TV is dropped, you may be injured or the
TV may be damaged.
?
A-13
PREPARATION
NOT USING THE DESKTYPE STAND
■ ■ Image shown may differ from your TV.
Only 26/32LK3**, 32/42LK4**
Insert the Protection Cover into the TV until
clicking sound.
When installing the wall-mounted unit,use the protection cover.
PREPARATION
Only 22LK3**
1
Carefully place the TV screen side down
on a cushioned surface to protect the
screen from damage.
Protection Cover
SWIVEL STAND
(Only 26/32LK3**, 32/42LK4**, 32/42LV3***)
■ Image shown may differ from your TV.
■ This feature is not available for all models.
2
Loose the bolts from TV.
3
Detach the Stand from TV.
After installing the TV, you can adjust the TV set
manually to the left or right direction by 20 degrees
to suit your viewing position.
POSITIONING YOUR
DISPLAY
(Only 22LK3**)
4
After removing the protection paper from
the protection cover, adhere it to the TV as
shown.
Protection Cover
A-14
■ Image shown may differ from your TV.
Adjust the position of the panel in various ways
for maximum comfort.
• Tilt range
ATTACHING THE TV TO A KENSINGTON SECURITY
DESK
SYSTEM
(Only 26/32LK3**, 32/42LK4**, 32LV2***, 32LV3***)
PREPARATION
■ Image shown may differ from your TV.
■ Image shown may differ from your TV.
■ This feature is not available for all models.
■ This feature is not available for all models.
The TV must be attached to desk so it cannot be
he TV is equipped with a Kensington Security
T
pulled in a forward/backward direction, potentially
System connector on the back panel. Connect
causing injury or damaging the product. Use only
an attached screw.
the Kensington Security System cable as shown
below.
For the detailed installation and use of the
Kensington Security System, refer to the user’s
guide provided with the Kensington Security
System.
1-Screw (provided as parts of the product)
For further information, contact http://www.kensington.com, the internet homepage of the
Stand
Kensington company. Kensington sells security
systems for expensive electronic equipment
such as notebook PCs and LCD projectors.
! NOTE
Desk
! WARNING
► ►To prevent TV from falling over, the TV should be
securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the
? machine may cause injury.
CONNECTION OF TV
(Only 19/22/26LV2***)
■ ■ Image shown may differ from your TV.
► ►The Kensington Security System is an optional
accessory.
► ►If the TV feels cold to the touch, there may be a
?small “flicker” when when it is turned on.
This is normal, there is nothing wrong with TV.
► ►Some minute dot defects may be visible on the
screen, appearing as tiny red, green, or blue
spots. However, they have no adverse effect on
the monitor's performance.
► ►Avoid touching the screen or holding your
finger(s) against it for long periods of time.
Doing so may produce some temporary distortion effects on the screen.
DC IN
AC/DC Adaptor
1
Connect the antenna cable to the antenna
input port on the TV.
2
Connect the AC/DC adapter plug to the
power input jack on the TV.
3
onnect the power cord to the AC/DC
C
adapter first, then plug the power cord into
the wall power outlet.
A-15
PREPARATION
CAREFUL INSTALLATION ADVICE
PREPARATION
■ ■ You should purchase necessary components to fix the TV safety and secure to the wall from the
market.
■ ■ Position the TV close to the wall to avoid the possibility of it falling when pushed.
■ ■ The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing
injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from
the TV.
1
1
2
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
3
Use a sturdy rope to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between
the wall and the product.
! NOTE
► ►When moving the TV undo the cords first.
► ►Use a platform or cabinet strong and large enough to support the size and weight of the TV.
►?►To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
A-16
EARTHING
10 cm
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are
not possible, have a qualified electrician install a
separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
10 cm
10 cm
10 cm
10 cm
Circuit breaker
■ The TV can be installed in various ways such as
on a wall, or on a desktop etc.
■ The TV is designed to be mounted horizontally.
DESKTOP PEDESTAL
INSTALLATION
For adequate ventilation allow a clearande of 10 cm
(4 Inches) all around the TV.
► ►Should Install wall mount on a solid wall perpendicular to the floor.
► ►Should use a special wall mount, if you want to
? install it to ceiling or slanted wall.
► ►The surface that wall mount is to be mounted on
should be of sufficient strength to support the weight
of TV set; e.g. concrete, natural rock, brick and hollow block.
► ►Installing screw type and length depends on the wall
mount used. Further information, refer to the instructions included with the mount.
► ►LG is not liable for any accidents or damage to property or TV due to incorrect installation:
- Where a non-compliant VESA wall mount
is used.
- I Incorrect fastening of screws to surface
which may cause TV to fall and cause
personal injury
- Not following the recommended Installation
method.
PREPARATION
! NOTE
Power Supply
A
10 cm
B
10 cm
10 cm
10 cm
Model
WALL MOUNT :
HORIZONTAL INSTALLATION
■ ■ We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
■ ■ We recommend that you purchase a wall mounting
bracket which supports VESA standard.
■ ■ LG recommends that wall mounting be performed
by a qualified professional installer.
22LK3**
26LK3**
32LK3**
32LK4**
42LK4**
19LV2***
22LV2***
26LV2***
32LV2***
32LV3***
42LV3***
VESA
(A * B)
100 * 100
200 * 100
200 * 100
200 * 100
200 * 200
100 * 100
100 * 100
100 * 100
200 * 100
200 * 100
400 * 400
Standard Quantity
Screw
M4
M4
M4
M4
M6
M4
M4
M4
M4
M4
M4
4
4
4
4
4
4
4
4
4
4
4
A-17
PREPARATION
REMOTE CONTROL KEY FUNCTION
When using the remote control, aim it at the remote control sensor on the TV.
■ Image shown may differ from your TV.
POWER Switches the TV on from standby or off to standby.
PREPARATION
ENERGY Adjust the power saving mode of the TV.
SAVING
AV MODE It helps you select and set images and sounds
when connecting AV devices.( p.28)
INPUT External input mode rotate in regular sequence.
Switches the TV on from standby.
TV Selects TV channel.
0 to 9 number Selects a programme.
button Selects numbered items in a menu.
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
Home
VOLUME UP Adjusts the volume.
/DOWN
MARK Check and un-check programmes in the USB
menu.
FAV Displays the selected favourite programme.
RATIO Selects your desired picture format. MUTE Switches the sound on or off.
PAGE UP/ Move from one full set of screen information to the
DOWN next one.
Programme Selects a programme.
UP/DOWN
Coloured These buttons are used for teletext (on TELETEXT
buttons models only), Programme edit.
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.( p.72)
A-18
■ Image shown may differ from your TV.
Controls the USB menu.
Q. MENU Select the desired quick menu source.( p.14)
THUMBSTICK Allows you to navigate the on-screen menus and
(Up/Down/Left/ adjust the system settings to your preference
Right)
PREPARATION
Home Selects a menu.
Clears all on-screen displays and returns to TV viewing from any menu.
OK Accepts your selection or displays the current mode.
BACK Allows the user to move return one step in an inter
active application, EPG or other user interaction
function.
See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu
appears at the screen.( p.25)
Home
EXIT Clears all on-screen displays and returns to TV viewing from any menu.
SIMPLINK /
Controls SIMPLINK or USB menu.
USB Menu
control buttons
Installing Batteries
■ Open the battery compartment cover on the back and install
the batteries matching correct polarity (+ with +, - with -).
■ Install two 1.5 V AAA batteries. Do not mix old or used batteries
with new ones.
■ Close cover.
■ To remove the batteries, perform the installation a actions in
reverse
A-19
EXTERNAL EQUIPMENT SETUP
■ ■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
VIDEO
AUDIO
1
2
L(MONO) VIDEO
AUDIO
ANTENNA
IN
IN
(CONTROL&SERVICE)
RF /DVI
Coaxial
Wire (75 Ω)
VIDEO
2
RS-232C IN
(CONTROL&SERVICE)
L(MONO) VIDEO
AV IN
AV
ANTENNA
IN
1
/DVI IN
1
AUDIO
RGB IN (PC)
VARIABLE AUDIO OUT
VHF
IN
AUDIO
Signal
2
Amplifier
AV IN 1
R
AUDIO IN
(RGB/DVI)
UHF
COMPONENT IN
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
IN1
Antenna
RS-232C IN
IN1
1
R
RGB IN (PC)
VARIABLE AUDIO OUT
2
IN
Outdoor
Antenna
(VHF, UHF)
AV IN 1
EXTERNAL EQUIPMENT SETUP
Wall
Antenna
Socket
Multi-family Dwellings/Apartments AUDIO IN
(RGB/DVI)
(Connect to wall antenna socket)
COMPONENT IN
■ ■ For optimum picture quality, adjust antenna direction.
■ ■A
n antenna cable and converter are not supplied.
■ ■ In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier
to the antenna as shown above.
■ ■ If signal needs to be split for two TVs, use an antenna signal splitter for connection.
1
EXTERNAL EQUIPMENT SETUP
RS-232C IN
■ To avoid damaging any equipment, never plug in any power cord
until you have finished connecting
(CONTROL)
all equipment.
■ This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for the 26/32LK3** models.
RGB IN (PC)
■ Image shown may differ from your TV.
AUDIO IN
2
1
1
L - AUDIO OUT - R VIDEO
/DVI IN
EXTERNAL EQUIPMENT SETUP
Connect the video outputs (Y, PB, PR) of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN VIDEO jacks on
the TV.
2
Connect the audio outputs (Y, PB, PR) of the
external equipment (digital set-top box, DVD,
etc.) to the COMPONENT IN AUDIO jacks on
the TV.
3
Turn on the external equipment.
(Refer to the external equipment's manual for
operating instructions.)
4
Select Component input source using the
INPUT button on the remote control.
COMPONENT IN
1
Component
HDMI
480i/576i
O
X
480p/576p
O
O
720p/1080i
O
O
O
O
(50/60Hz only)
ANTENNA
IN
AUDIO
VIDEO
Signal
1080p
AUDIO
/MONO
AV IN1
CONNECTING WITH A COMPONENT CABLE
(RGB/DVI)
2
(24Hz/30Hz/50Hz/60Hz)
Component Input ports
RS-232C IN input ports as shown below.
To achieve better picture quality, connect a DVD player to the component
(CONTROL)
Y
PB
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
2
1
PR
R-Y
Cr
Pr /DVI IN
RGB IN (PC)
L - AUDIO OUT - R VIDEO
Y
2
AUDIO IN
(RGB/DVI)
PB
VIDEO
PR
/MONO
L
AUDIO
AUDIO
COMPONENT IN
R
AV IN1
Component ports on the TV
ANTENNA
IN
CONNECTING WITH A HDMI CABLE
1
/DVI IN
RS-232C IN
(CONTROL)
RGB IN (PC)
2
L - AUDIO OUT - R VIDEO
/MONO
AUDIO
1
Turn on the external equipment.
/DVI IN
Y
ANTENNA
IN
AUDIO
VIDEO
AUDIO IN
(RGB/DVI)
AV IN1
Select HDMI1, HDMI2
(Except
COMPONENT
IN for 22LK3**) or
HDMI3 (Only 32/42LK4**, 32LV2***) input source
using the INPUT button on the remote control.
PB
VIDEO
PR
L
AUDIO
R
COMPONENT IN
ANTENNA
IN
EXTERNAL EQUIPMENT SETUP
3
Connect the HDMI output of the external equipment (digital set-top
RGB IN (PC) box, DVD, etc.) to HDMI/DVI
AUDIO IN
IN2 1, HDMI/DVI IN 2 (Except
22LK3**) or HDMI IN
(RGB/DVI)
3 1(Only 32/42LK4**,
32LV2***)
jack on the TV.
L - AUDIO OUT - R VIDEO /MONO AUDIO
AV IN1
2
RS-232C IN
(CONTROL)
1
RS-232C IN
(CONTROL)
RGB IN (PC)
2
L - AUDIO OUT - R VIDEO
/MONO
AUDIO
/DVI IN
! NOTE
Y
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
R
AV IN1
1
AUDIO IN
(RGB/DVI)
ANTENNA
IN
►Check that your HDMI cable is High Speed HDMI Cable.
If 2
the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result.
Please use the High Speed HDMI Cable.
?
► HDMI mode supports PCM audio format only.
AV IN2
► Audio format was reseted to Dolby/DTS/Bitstrem in DVD Player or STB, it should be changed to PCM.
► We recommend using under 10m of the HDMI cable. When using over the length, connect an amplifier or repeater.
► If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
S-VIDEO
VIDEO
OUTPUT
SWITCH
L
R
ANT IN
3ANT OUT
EXTERNAL EQUIPMENT SETUP
ANT OUT
S-VIDEO
VIDEO
L
R
CONNECTING WITH A HDMI TO DVI CABLE
RS-232C IN
(CONTROL)
ANT IN
1
OUTPUT
SWITCH
RGB IN (PC)
1
2
Connect
the audio output of the digital set-top
/DVI IN
box or the PC audio output to the AUDIO IN
Y
PB
L
PR
R
ANTENNA
AUDIO
(RGB/DVI) jack onVIDEO
the TV.
IN
26/32LD330
RGB IN (PC)
AUDIO IN
RS-232C IN(RGB/DVI)USB IN
(CONTROL) SERVICE ONLY
L - AUDIO OUT - R VIDEO /MONO AUDIO
2
AV IN1
AV IN1
Connect the digital set-top box
AUDIOor
IN the DVI out(RGB/DVI)
put of the PC to HDMI/DVI IN
1 jack on the
2
L - AUDIO OUT - R VIDEO /MONO AUDIO
TV.
1
EXTERNAL EQUIPMENT SETUP
4
Turn on the digital set-top box or the PC and
the TV.
(Refer to the digital set-top box or the PC
manual for operating instructions.)
AUDIO IN
(RGB/DVI)
/DVI2IN
1
COMPONENT IN
3
RS-232C IN
(CONTROL)
Y
AUDIO R
PBRGB IN
PR(PC) L VIDEO L(MONO)
R
ANTENN
AUDIO
VIDEO
IN
/DVI IN
COMPONENT IN
AUDIO
VIDEO
COMPONENT IN
2
1
Select HDMI1 input source using the INPUT
button on the remote control.
RS-232C IN
(CONTROL)
USB IN
SERVICE ONLY
AUDIO IN
(RGB/DVI)
2
1
RGB IN (PC)
VIDEO
/MONO
AUDIO
/DVI IN
Y
PB
VIDEO
PR
L
AUDIO
R
COMPONENT IN
DVI-PC OU
USB SETUP
1
1
Connect the USB device to the USB IN jack on the TV.
2
After connecting the USB IN jack, you use the USB function. ( p.31)
AV IN2
2
1
4
/D
AV IN2
CONNECTING WITH A RCA CABLE
Connect the AUDIO/VIDEO jacks between TV
and VCR or external equipment. Match the jack
colours (Video = yellow, Audio Left = white, and
Audio Right = red)
2
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
Or, Operate the corresponding external equipment.
(Refer to external equipment operating guide.)
1
1
EXTERNAL EQUIPMENT SETUP
3
1
Select AV1 input source using the INPUT button on the remote control.
If connected to AV IN2, select AV2 input
source.
or
! NOTE
► ►If you have a mono VCR, connect the audio cable from
the VCR to the AUDIO L/MONO jack of the TV.
?
Video Game Set
Camcorder
5
EXTERNAL EQUIPMENT SETUP
CONNECTING WITH A RF CABLE
■ To avoid picture noise (interference), allow adequate distance between the VCR and TV.
EXTERNAL EQUIPMENT SETUP
1
Connect the ANT OUT socket of the VCR to the
ANTENNA IN socket on the TV.
2
Connect the antenna cable to the ANT IN socket
of the VCR.
3
Press the PLAY button on the VCR and match the
appropriate programme between the TV and VCR
for viewing.
1
Wall Jack
2
Antenna
EXTERNAL STEREO SETUP
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
1
Set up your speakers through your analog stereo
amplifier, according to the instructions provided
with the amplifier.
RGB IN (PC)
AUDIO IN
(RGB/DVI)
L - AUDIO OUT - R
VIDEO L(MONO) AUDIO R
/DVI IN
VIDEO
AUDIO
COMPONENT IN
1
! !
NOTE
► ►When connecting with external audio equipments,
such as amplifiers or speakers, please turn the TV
speakers off.(►65)
? ?
6
AV IN1
2
RS-232C IN
(CONTROL)
Connect the input jack of the stereo amplifier to
the AUDIO OUT jacks on the TV.
ANTENNA
IN
CONNECTING WITH A D-SUB 15 PIN CABLE
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's
settings.
RS-232C IN
(CONTROL)
RGB IN (PC)
2
1
AUDIO IN
(RGB/DVI)
L - AUDIO OUT - R VIDEO
/MONO
AUDIO
/DVI IN
2
Connect the PC audio output to the AUDIO IN
(RGB/DVI) jack on the TV.
3
Turn on the PC and the TV.
4
Select RGB input source using the INPUT button on the remote control.
Y
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
1
2
RGB OUTPUT
AUDIO
R
AV IN1
Connect the RGB output of the PC to the RGB
IN (PC) jack on the TV.
ANTENNA
IN
EXTERNAL EQUIPMENT SETUP
1
7
RS-232C IN
(CONTROL)
USB IN
SERVICE ONLY
EXTERNAL EQUIPMENT SETUP
SUPPORTED DISPLAY RESOLUTION
RGB-PC mode
HDMI/DTV mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
31.468
70.09
720x480
31.47
59.94
720x400
31.469
70.09
720x480
31.50
60.00
640x480
31.469
59.94
720x576
31.25
50.00
EXTERNAL EQUIPMENT SETUP
800x600
37.879
60.317
1280x720
44.96
59.94
1024x768
48.363
60.004
1280x720
45.00
60.00
1280x768
47.776
59.87
1280x720
37.50
50.00
1360x768
47.720
59.799
1920x1080
33.72
59.94
1280x1024
63.668
59.895
1920x1080
33.75
60.00
1920x1080
66.587
59.934
1920x1080
28.125
50.00
1920x1080
67.432
59.94
1920x1080
67.50
60.00
1920x1080
56.25
50.00
1920x1080
27.00
24.00
1920x1080
33.75
30.00
only 32/42LK4**, 22LV2***, 42LV3***
!
NOTE
► ►Avoid keeping a fixed image on the TV ’s screen for
prolonged periods of time. The fixed image may
become permanently imprinted on the screen; use
a screen saver when possible.
► ►There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC mode.
Change the PC mode to another resolution or
change the refresh rate to another rate or adjust
the brightness and contrast on the menu until the
picture is clear. If the refresh rate of the PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC
graphic card.
► ►The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
?
8
► ►We recommend using 1920x1080, 60 Hz(Only
32/42LK4**, 22LV2***, 42LV3***), 1360x768, 60
Hz(Except 32/42LK4**, 22LV2***, 42LV3***) for the
PC mode, this should provide the best picture quality.
► ►If the resolution of PC is over SXGA, there will be no
picture on the TV.(Only HD Models)
► ►Connect the audio cable from the PC to the Audio
input on the TV.(Audio cables are not included with
the TV).
► ►you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of the cable. This provides the best picture
quality.
SCREEN SETUP FOR PC MODE
SCREEN RESET
Returns Position, Size and Phase to the factory default settings.
This function works in the following mode: Component(Except 480i, 576i), RGB.
Move
▲
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
• Advanced Control
• Picture Reset
Screen
Screen
1
2
3
4
5
0
Screen
OK
Move
Prev.
Resolution
Auto Config.
Position
R
G
Size
To Set
Yes
No
Phase
Reset
EXTERNAL EQUIPMENT SETUP
PICTURE
Select PICTURE.
Select Screen.
Select Reset.
Select Yes.
Run Reset.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
9
EXTERNAL EQUIPMENT SETUP
AUTO CONFIGURE (RGB [PC] MODE ONLY)
Automatically adjust the picture position and minimizes image instability. After adjustment, if the image
is still not correct, your TV is functioning properly but needs further adjustment.
EXTERNAL EQUIPMENT SETUP
Auto configure
This function is for automatic adjustment of the screen position, size and phase The displayed image
will be unstable for a few seconds while the auto configuration is in progress.
PICTURE
Move
▲
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
• Advanced Control
• Picture Reset
0
Screen
Screen
OK
Move
Prev.
Resolution
Auto Config.
Position
R
G
Size
To Set
Yes
No
Phase
Reset
1
2
3
4
5
Select PICTURE.
Select Screen.
• If the position of the image is still not correct,
try Auto adjustment again.
• If picture needs to be adjusted again after
Auto adjustment in RGB (PC), you can adjust
the Position, Size or Phase.
Select Auto Config..
Select Yes.
Run Auto Config..
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
10
SELECTING RESOLUTION
To view a normal picture, match the resolution of RGB mode at TV and selection at PC.
This function works in the following mode: RGB[PC] (1024x768, 1280x768, 1360x768)
Move
▲
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
• Advanced Control
• Picture Reset
0
Screen
OK
Resolution
Auto Config.
Position
R
Move
Prev.
1024 x 768
1280 x 768
1360 x 768
G
Size
Phase
Screen
Reset
1
2
3
4
EXTERNAL EQUIPMENT SETUP
PICTURE
Select PICTURE.
Select Screen.
Select Resolution.
Select the desired resolution.
5
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
11
EXTERNAL EQUIPMENT SETUP
ADJUSTMENT FOR SCREEN POSITION, SIZE, PHASE
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the
picture phase manually.
EXTERNAL EQUIPMENT SETUP
Position operates in Component(except 480i, 576i), RGB mode.
Size, Phase operate only in RGB mode.
PICTURE
Move
▲
• Contrast
90
• Brightness
50
• Sharpness
60
• Colour
60
• Tint
• Advanced Control
0
Screen
OK
Move
Prev.
Resolution
Auto Config.
Position
R
G
• Picture Reset
Size
Phase
Screen
Reset
1
2
3
4
Select PICTURE.
Select Screen.
Select Position, Size or Phase.
Make appropriate adjustments.
5
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
12
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
2
In standby mode to turn TV on, press the / I, INPUT or P
button on the TV or press the
POWER, INPUT, P
or NUMBER button on the remote control and the TV will switch on.
1
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can
adjust the Language, Mode Setting, Auto Tuning.
Note:
a.If you close without completing the initial setting, the Initial Setting menu can be displayed again.
b.“Store Demo” mode is only for shop display and not for general customer use.
c."Home Use” mode is the optimal setting for home environments, and is the TV's default mode.
d."Store Demo" mode is the optimal setting for store environments. If a user modifies image quality data, “Store Demo” mode initializes the product to the image quality set by us after a certain
period of time.
e.The mode (Home Use, Store Demo) can be changed by executing Mode Setting in the OPTION
menu.
PROGRAMME SELECTION
1
Press the P
WATCHING TV / PROGRAMME CONTROL
INITIALIZING SETUP
or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
1
Press the
+ or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE,
+ , - or AV MODE button.
13
WATCHING TV / PROGRAMME CONTROL
QUICK MENU
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
Q.Menu (Quick Menu) is a menu of features which users might use frequently.
WATCHING TV / PROGRAMME CONTROL
• Aspect Ratio: Selects your desired picture format.
For Zoom Setting, select 16:9, Original, 4:3, 14:9, Zoom and Cinema Zoom in Ratio Menu. After
completing Zoom Setting, the display goes back to Q.Menu.
• Clear Voice II : By differentiating the human sound range from others, it helps users listen to
human voices better
• Picture Mode : Selects your desired Picture Mode.
• Sound Mode : It is a feature to automatically set the sound combination which it deems the best
for the images being watched. Selects your desired Sound Mode.
• Audio : Selects the sound output.
• Sleep Timer : Sets the sleep timer.
• Favourite : Selects the favourite programme.
• USB Device : Selects “Eject” in order to eject USB device.
Q. Menu
Aspect Ratio
◄
16:9
16:9
►
Zoom Setting
Clear VoiceII
3
Picture Mode
Standard
Sound Mode
Standard
Audio
Favourite
Mono
Sleep Timer
Off
Favourite
Off
USB Device
Eject
Close
1
2
Display each menu.
Select your desired Source.
3
• Press the Q.MENU button to return to normal TV viewing.
14
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
■ Image shown may differ from your TV.
SETUP
Move
OK
Auto Tuning
PICTURE
Move
Aspect Ratio
Manual Tuning
Energy Saving
Programme Edit
OK
AUDIO
: 16:9
Auto Volume
Move
Clear Voice II
: Off
: Vivid
• Level
• Backlight
100
Balance
• Contrast
100
Sound Mode
: Standard
• Brightness
50
• Infinite Surround : Off
• Sharpness
70
• Treble
50
• Colour
70
• Bass
50
Move
OK
-
+
0
L
R
▼
SETUP
PICTURE
AUDIO
TIME
OPTION
USB
OPTION
Move
Menu Language
Clock
3
: English
OK
USB
Move
Photo List
Off Time
: Off
Input Label
On Time
: Off
SIMPLINK
: On
Movie List
Sleep Timer
: Off
Key Lock
: Off
DivX Reg. Code
Set ID
:1
Deactivation
Music List
Power Indicator
Demo Mode
: Off
Mode Setting
: Home Use
OK
WATCHING TV / PROGRAMME CONTROL
: Off
Picture Mode
▼
TIME
OK
: Off
▼
1
2
3
Display each menu.
Select a menu item.
Move to the pop up menu.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
15
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Use this to automatically find and store all available programmes.
When you start auto programming, all previously stored service information will be deleted.
!
SETUP
Move
OK
SETUP
WATCHING TV / PROGRAMME CONTROL
Auto Tuning
Tuning
Auto
Manual Tuning
Auto Tuning
Programme Edit
Programme Edit
Manual Tuning
Move
?
Check your antenna connection. The
previous channel information will be
updated during Auto Tuning.
Yes
1
2
3
4
Select SETUP.
OK
No
• If you wish to keep on auto tuning select Yes
using the < >button. Then, press the OK button. Otherwise select No.
Select Auto Tuning.
Select Yes.
Run Auto tuning.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
16
MANUAL PROGRAMME TUNING
Manual Tuning lets you manually tune and arrange the stations in whatever order you desire.
SETUP
Move
SETUP
OK
Move
OK
Auto Tuning
Auto Tuning
Manual Tuning
Programme Edit
Manual Tuning
Storage
Programme Edit
System
◄
1
►
BG
V/UHF
Channel
0
Fine
◄
►
Search
◄
►
Name
C 02
Store
Close
1
2
3
4
5
Select SETUP.
Select Manual Tuning.
or
Make appropriate
adjustments.
Select TV system.
6
7
8
Select V/UHF or Cable.
or
Select the desired
channel number.
Commence searching.
WATCHING TV / PROGRAMME CONTROL
Band
Select Store.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
• BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia / NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : NTSC-M (USA / Korea / Philippines), PAL-M(South America)
• To store another channel, repeat steps 3 to 8.
17
WATCHING TV / PROGRAMME CONTROL
SETUP
Move
SETUP
OK
Move
OK
Auto Tuning
Auto Tuning
Manual Tuning
Programme Edit
Manual Tuning
Storage
1
Programme Edit
System
BG
Band
V/UHF
Channel
0
Fine
◄
►
Search
◄
►
Name
C 02
Store
Close
WATCHING TV / PROGRAMME CONTROL
■ ■Assigning a station name
You can assign a station name with five characters to each programme number.
1
2
3
Select SETUP.
4
Select Manual Tuning.
Select Name.
5
Select the position and
make your choice of the
second character, and
so on.
You can use an the
alphabet A to Z, the
number 0 to 9, +/ -, and
blank.
Select Store.
6
■ ■Fine Tuning
Normally fine tuning is only necessary if reception is poor.
1
2
3
4
Select SETUP.
Select Manual Tuning.
Select Fine.
5
Fine tune for the best picture
and sound.
Select Store.
6
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
18
PROGRAMME EDIT
When a programme number is skipped, it means that you will be unable to select it using P
during TV viewing.
button
If you wish to select the skipped programme, directly enter the programme number with the NUMBER
buttons or select it in the Programme edit menu.
This function enables you to skip the stored programmes.
Move
9
OK
S11
Auto Tuning
0 -----
1 ARD
2 BBC1
Manual Tuning
4 C 01
5 S 46
6 C 05
7 C 06
Programme
ProgrammeEdit
Edit
8 C 10
4 S 11
4 C 52
11 -----
12 -----
13 -----
14 -----
15 -----
16 -----
17 -----
18 -----
19 -----
20 -----
21 -----
22 -----
23 -----
24 -----
25-----
26 -----
27 -----
28 -----
29 -----
30 -----
31 -----
Pr. Change
Delete
1
2
3
4
TV
Navigation
P
Page Change
Move
4 ARD
Previous
Skip
Select SETUP.
WATCHING TV / PROGRAMME CONTROL
SETUP
Select Programme Edit.
Enter the Programme Edit.
Select a programme to be stored or skipped.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
19
WATCHING TV / PROGRAMME CONTROL
This function enables you to delete or skip the stored programmes.
You can also move some channels and use other programme numbers.
■ ■Deleting a programme
1
2
3
Select a programme number to be deleted.
RED
Turn the deleted programme number to RED.
RED
Release the deleted programme.
following programmes are shifted up one.
WATCHING TV / PROGRAMME CONTROL
■ ■Moving a programme
1
Select a programme number to be moved.
2
YELLOW
3
YELLOW
Turn the moved programme number to YELLOW.
Release the moved programme.
■ ■Skipping a programme number
1
Select a programme number to be skipped.
2
BLUE Turn the skipped programme number to BLUE.
3
BLUE Release the skipped programme.
20
•T
he selected programme is deleted, all the
• When a programme number is
skipped it means that you will be
unable to select it using the P
button during normal TV viewing.
• If you wish to select a skipped programme, directly enter the programme
number with the NUMBER buttons or
select it in the programme edit.
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
Programme List
1 C 01
8:
2 C 05
8:
3 BLN 2
8:
8:
8:
8:
8:
8:
Exit
■ ■Displaying programme LIST
1
Display the Programme List.
• You may find some blue programmes. These
have been set up to be skipped by auto programming or in the programme edit mode.
•S
ome programmes with the channel number
shown in the programme list indicate there is no
station name assigned.
■ ■Selecting a programme in the programme list
1
WATCHING TV / PROGRAMME CONTROL
8:
Select a programme.
2
Switch to the chosen programme number.
■ ■Paging through a programme list
1
P
P
A
G
E
Turn the pages.
2
Return to normal TV viewing.
21
WATCHING TV / PROGRAMME CONTROL
FAVOURITE PROGRAMME SETUP
■ ■Selecting favourite programme
Favorite programmes is a convenient feature that lets you quickly scan up to programmes of your
choice without having to wait for the TV to scan through all the in-between programmes.
1
Q. Menu
Aspect Ratio
16:9
2
Zoom Setting
WATCHING TV / PROGRAMME CONTROL
Clear VoiceII
3
Picture Mode
Standard
Sound Mode
Standard
Audio
Favourite
Sleep Timer
Favourite
3
Mono
Off
4
Off
◄ Favourite
►
USB Device
or
Select your desired
programme.
Select Favourite.
Select Favourite.
Return to TV viewing.
Eject
Close
•T
his will automatically include the selected programme into your favourite programme list.
■ ■ Displaying the favourite programme list
1
Favourite List
1 C 01
8:
2 C 05
8:
3 BLN 2
8:
8:
8:
8:
8:
8:
8:
Exit
22
Display the Favourite Programme List.
INPUT LIST
Only 26/32LK3**
TV
AV1
AV2
Component
HDMI3
HDMI2
HDMI1
RGB
1
•
•
•
•
•
INPUT
Except 22LK3**
Select the input source.
TV : Select it when watching the TV.
AV : Select it when watching the VCR or external equipment.
Component : Select it when using DVD or Digital set-top box depends on connector.
RGB : Select it when using PC depends on connector.
HDMI : Select it when using DVD or Digital set-top box depend on connector.
WATCHING TV / PROGRAMME CONTROL
Only 32/42LK4**, 32LV2***
23
WATCHING TV / PROGRAMME CONTROL
INPUT LABEL
Selects a label for each input source.
OPTION
Move
Menu Language
OK
: English
WATCHING TV / PROGRAMME CONTROL
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
Demo Mode
Mode Setting
: Off
Demo Mode
: Home Use
Mode Setting
▼
3
4
AV1
OK
: English AV2
SIMPLINK
Power Indicator
2
Move
Menu Language
Input Label
Input Label
1
OPTION
◄
Only 26/32LK3**
Component
RGB
HDMI1
Except 22LK3**
Only 32/42LK4**, 32LV2***
HDMI2
: Off
HDMI3
: Home Use
▼
►
Close
Select OPTION.
Select Input Label.
Select the source.
Select the label.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
24
SIMPLINK
This function operates only with devices with the SIMPLINK logo.
Please check the SIMPLINK logo.
The product might not function properly when using it with other products with HDMI-CEC function.
This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings.
If you do not require the SIMPLINK menu, select “Off”.
Move
Menu Language
: English
Input Label
OPTION
Move
Menu Language
OK
: English
Input Label
SIMPLINK
SIMPLINK
: On
SIMPLINK
On
:: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
Off
On
On
Power Indicator
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
▼
1
OK
▼
Select OPTION.
2
Select SIMPLINK.
3
WATCHING TV / PROGRAMME CONTROL
OPTION
Select On or Off.
4
Save.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
! NOTE
► ►Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal and Side terminal (HDMI terminal)
of the SIMPLINK device with the HDMI cable.
►?►When you switch the Input source using the INPUT button on the remote control, you can stop the operation
of a device controlled by SIMPLINK.
25
WATCHING TV / PROGRAMME CONTROL
SIMPLINK FUNCTIONS
WATCHING TV / PROGRAMME CONTROL
26
Disc playback
Control connected AV devices by pressing the / /< / >, OK, ►, ▀, l l, ◄◄ and ►► buttons.
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
Sync Power on
When the equipment with Simplink function connected HDMI terminal starts to play, The TV will change automatically
to turn on mode.
* A device, which is connected to the TV through an HDMI cable but does not support
SIMPLINK, does not provide this function.
Note: To operate SIMPLINK, an High Speed HDMI Cable with *CEC function should be used. (*CEC:
Consumer Electronics Control).
SIMPLINK MENU
Press the
button and then OK button to select the desired SIMPLINK source.
1
Selected Device
2
4
5
►
When a device is connected
(displayed in bright colour)
1
TV viewing : Switch to the previous TV programme regardless of the current mode.
2
DISC playback : Select and play connected discs.
When multiple discs are available, the titles of discs are conveniently displayed at the bottom of the
screen.
3
VCR playback : Play and control the connected VCR.
4
HDD Recordings playback : Play and control recordings stored in HDD.
5
Audio Out to Home theater/Audio Out to TV: Select Home theater or TV speaker for Audio Out.
WATCHING TV / PROGRAMME CONTROL
When device is not connected
(displayed in gray)
3
27
WATCHING TV / PROGRAMME CONTROL
AV MODE
You can select the optimal images and sounds when connecting AV devices to external input.
Off
Cinema
Sport
Game
WATCHING TV / PROGRAMME CONTROL
1 AV MODE
Disables the AV MODE.
Optimizes video and audio for watching movies.
Optimizes video and audio for watching sports events.
Optimizes video and audio for playing games.
Off
Cinema
Game
Sport
Press the AV MODE button repeatedly to select the desired source.
2
• If you select Cinema in AV mode, Cinema will be selected both for
Picture Mode and Sound Mode in PICTURE menu and AUDIO menu
respectively.
• If you select “Off” in AV mode, the picture and image which you initially
set will be selected.
28
INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS)
Use to quickly reset all the menu options to their original factory preset values.
This function deletes all TV programmes.
When the Factory Reset is completed, you must restart the Initializing setup.
OK
▼
Input Label
2
3
4
: On
Key Lock
: Off
: On
Key Lock
: Off
Set ID
:1
Set ID
Demo Mode
: Off
Demo Mode
Mode Setting
: Home Use
Initial
Setting
Factory
Reset
Move
SIMPLINK
SIMPLINK
Power Indicator
1
OPTION
Power Indicator
Mode Setting
Initial
Setting
Factory
Reset
OK
▼
Move
Input Label
:1
All user settings and channel settings
will be reset. Still Continue?
: Off
: Home Use
Yes
No
WATCHING TV / PROGRAMME CONTROL
OPTION
Select OPTION.
Select Initial Setting
Select Yes.
Start Initial Reset.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
29
WATCHING TV / PROGRAMME CONTROL
KEY LOCK
The TV can be set so that the remote control is required to control it.
This feature can be used to prevent unauthorized viewing.
OPTION
Move
Menu Language
: English
WATCHING TV / PROGRAMME CONTROL
Input Label
4
Menu Language
OK
: English
SIMPLINK
: On
SIMPLINK
: On
:: Off
Off
Key Lock
:: Off
Off
Set ID
:1
Set ID
:1
Off
On
On
Power Indicator
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
: Home Use
Mode Setting
: Home Use
Select OPTION.
Select Key Lock.
3
Move
Key Lock
▼
2
OPTION
Input Label
Power Indicator
1
OK
Select On or Off.
▼
• In Key Lock ‘On’, if the TV is turned off, to turn on the
TV, press the INPUT, P
button on the TV or
POWER INPUT, P
or NUMBER buttons on the
remote control then the set will be turned on.
• With the Key Lock On, the display '
Key Lock
On ’ appears on the screen if any button on the
front panel is pressed while viewing the TV.
Save.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
30
1
/DVI IN
AUDIO
VIDEO
COMPONENT IN
TO USE A USB DEVICE
RS-232C IN
(CONTROL)
WHEN CONNECTING A USB DEVICE
USB IN
SERVICE ONLY
AUDIO IN
(RGB/DVI)
2
When you connect a USB device, this pop up menu is displayed, automatically.
“POP UP MENU” will not be displayed while the OSD including Menu is activated.
In USB device, you can not add a new folder or delete the existing folder.
■ ■ Image shown may differ from your TV.
1
RGB IN (PC)
VIDEO
/MONO
AUDIO
/DVI IN
Y
PB
VIDEO
PR
L
AUDIO
COMPONENT IN
1 Connect
the USB device to the USB IN
jack on the TV.
2
Select PHOTO LIST, MUSIC LIST or
MOVIE LIST.
PHOTO LIST
3
MUSIC LIST
MOVIE LIST
WHEN REMOVING THE USB DEVICE
Select the USB Eject menu before removing
the USB device.
1
2
Select Eject.
TO USE A USB DEVICE
USB memory stick
• This TV Supports on JPEG and MP3 and SD
DivX.
AV IN2
31
R
TO USE A USB DEVICE
PRECAUTIONS WHEN USING THE USB DEVICE
►
►
►
►
►
►
►
►
►
TO USE A USB DEVICE
►
►
►
►
►
►
►
►
►
►
►
32
►Only a USB storage device is recognizable.
►If the USB storage device is connected through a USB hub, the device is not recognizable.
►A USB storage device using an automatic recognition programme may not be recognized.
►A USB storage device which uses its own driver may not be recognized.
►The recognition speed of a USB storage device may depend on each device.
►Please do not turn off the TV or unplug the USB device when the connected USB storage device is working.
When such device is suddenly separated or unplugged, the stored files or the USB storage device may be
damaged.
►Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may
cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has
normal music files or image files.
►Please use only a USB storage device which was formatted as a FAT16, FAT32, NTFS file system provided
with the Windows operating system. In case of a storage device formatted as a different utility programme
which is not supported by Windows, it may not be recognized.
Data in a USB storage device cannot be deleted in the NTFS file system.
►Please connect power to a USB storage device which requires an external power supply. If not, the device may
not be recognized.
►Please connect a USB storage device with cable is offered by USB maker. If connected with cable is not offered
by USB maker or an excessively long cable, the device may not be recognized.
►Some USB storage devices may not be supported or operated smoothly.
►Maximum of 999 files and 200 folders can be recognized.
►Data in a USB storage device cannot be aligned.
►Up to 128 English characters can be recognized as a file name.
►Please back up the important file because a data of USB device may be damaged. Data management is consumer's responsibility and in consequence the manufactures does not cover the product bearing data damage.
►If the USB is connected in Standby Mode, specific hard disk will automatically be loaded when the TV is turned on.
►The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or less for USB memory.
►TV need more time to detect if the storage size is bigger. If the USB memory is connected in Standby Mode,
power on time would be longer than without memory.
►Any device with more than the recommended capacity may not work properly.
►If a USB external hard disk with a "Energy Saving" function does not work, turn the hard disk off and on again
to make it work properly.
PHOTO LIST
You can view photo files on USB storage device.
The On Screen Display may be different from your TV. Images are an example to assist with the TV operation.
When you are watching the photo by the Photo List function, you can not change the picture mode.
PHOTO(*.JPEG) supporting file
Baseline: Max 4800 x no limit
Min 64 X 64
• Not support to progressive jpeg.
• You can play JPEG files only.
• Only baseline scan is supported among JPEG (SOF0, SOF1 only).
• Non-supported files are displayed in the form of bitmap.
1
2
Select USB.
Select Photo List.
2
1
2
3
4
Moves to upper level folder
Current page/Total pages
Total number of marked photos
Corresponding buttons on the
remote control
PHOTO LIST
4
No Marked
Up Folder
Up Folder
Navigation
3
Page 2/3
Drive 1
JMJ001
1366x768, 125KB
1
TO USE A USB DEVICE
SCREEN COMPONENTS
OPTION
KY103
09/10/2008
KY101
09/10/2008
KY104
09/10/2008
KY102
09/10/2008
KY105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
Page Change
MARK
Mark
Exit
33
TO USE A USB DEVICE
PHOTO SELECTION AND POPUP MENU
PHOTO LIST
Page 2/3
Drive 1
JMJ001
1366x768, 125KB
Up Folder
Navigation
OPTION
PHOTO LIST
Page 2/3
Drive 1
TO USE A USB DEVICE
1366x768, 125KB
Up Folder
1
2
3
4
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
Page Change
MARK
OPTION
Mark
Exit
►
►
►
►
►
No Marked
Up Folder
JMJ001
Navigation
No Marked
Up Folder
KR103
09/10/2008
KR104
09/10/2008
KR101
09/10/2008
KR102
09/10/2008
JMJ001
09/10/2008
View
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
Mark All
09/10/2008
JMJ003
09/10/2008
Delete JMJ007
09/10/2008
JMJ004
09/10/2008
Close
09/10/2008
Page Change
KR105125KB
09/10/2008
1366x768,
MARK
JMJ008
Mark
►View : Display the selected item.
►Mark All : Mark all photos on the screen.
►Unmark All : Deselect all marked photos.
►Delete : Delete the selected photo item.
►Close : Close the pop-up menu.
Exit
Select the target folder or drive.
Select the desired photos.
Show the PopUp menu.
Select the desired PopUp
menu.
• Use the P
page.
button to navigation in the photo
• Use the MARK button to mark or unmark a
photo. When one or more photos are marked,
you can view each marked photo or a slide
show of the marked photos. If no photos are
marked, you can view every individual photo
in the folder or a slide show of all photos in the
folder.
• Press the BACK button to return to normal TV viewing.
34
SET UP THE MENU IN FULL-SIZED SCREEN
You can change the settings to display photos stored on a USB device, on a full-sized screen.
Detailed operations are available on full-sized photo view screen.
PHOTO LIST
Page 2/3
Drive 1
JMJ001
1366x768, 125KB
Up Folder
Navigation
KR103
09/10/2008
KR101
09/10/2008
KR104
09/10/2008
KR102
09/10/2008
KR105
09/10/2008
JMJ001
09/10/2008
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
09/10/2008
JMJ003
09/10/2008
JMJ007
09/10/2008
JMJ004
09/10/2008
JMJ008
09/10/2008
OPTION
Page Change
Page 2/3
Drive 1
MARK
1366x768, 125KB
Up Folder
Exit
No Marked
Up Folder
JMJ001
Mark
KR103
09/10/2008
KR104
09/10/2008
KR101
09/10/2008
KR102
09/10/2008
JMJ001
09/10/2008
View
JMJ005
09/10/2008
JMJ002
09/10/2008
JMJ006
Mark All
09/10/2008
JMJ003
09/10/2008
Delete JMJ007
09/10/2008
JMJ004
09/10/2008
Close
09/10/2008
OPTION
Page Change
KR105125KB
09/10/2008
1366x768,
MARK
JMJ008
Mark
1/17
1/17
Exit
Slideshow
BGM
Delete
Option
Hide
The aspect ratio of a photo may change the size
of the photo displayed on the screen in full size.
Press the BACK button to move to the previous
menu screen.
1
2
TO USE A USB DEVICE
PHOTO LIST
Navigation
No Marked
Up Folder
Select the target folder or drive.
Select the desired photos.
3
Show the PopUp menu.
4
Select View.
5
The selected photo is displayed in full size.
35
TO USE A USB DEVICE
6
Select the Slideshow , BGM,
Delete or Hide.
(Rotate),
• Use
1/17
1/17
Slideshow
BGM
Delete
Option
Hide
button to select the previous or next
photo.
• Use
button to select and control the menu
on the full-sized screen.
► ►Slideshow : When no picture is selected, all photos in the current
folder are displayed during slide show. If some photos are selected, those photos are displayed in a slide show.
■ Set the time interval of the slide show in Option.
TO USE A USB DEVICE
► ►BGM (Background Music) : Listen to music while viewing photos
in full size.
■ Set the Music Folder for BGM in Options before using this
function.
►►
(Rotate) : Rotate photos.
■ Rotates the photo 90°, 180°, 270°, 360° clockwise.
► ►Delete : Delete photos.
► ►Option : Set values for Slide Speed and Music Folder.
■ Use
button and OK button to set values.
Then go to OK and press OK to save the settings.
■ You cannot change Music Folder while BGM is playing.
► ► Hide : Hide the menu on the full-sized screen.
■ To see the menu again on the full-sized screen, press OK
button to display.
36
Press ◄ ► to set the time interval
between slides.
Slide Speed
Music Folder
OK
Fast
Music
Cancel
MUSIC LIST
Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be
supported by this model.
Music file on your USB device can be played by this unit.
The On Screen Display may be different from your TV. Images are an example to assist with the TV
operation.
MUSIC (*.MP3) supporting file
Bit rate : 32 k to 320kbps
Sampling rate MPEG1 layer 3 : 32 k to 48 kHz
SCREEN COMPONENTS
2
Select USB.
Select Music List.
2
1
2
3
4
Moves to upper level folder
Current page/Total pages
Total number of marked
music title
Corresponding buttons on
the remote control
TO USE A USB DEVICE
1
MUSIC LIST
3
Page 2/3
No Marked
Music
Title
Duration
Up Folder
01:34
00:00/01:34
1
03:23
Up Folder
Navigation
04:28
OPTION
Page Change
MARK
Mark
Exit
4
37
TO USE A USB DEVICE
MUSIC SELECTION AND POPUP MENU
As shown, up to 6 music titles are listed per page.
MUSIC LIST Page 2/3
No Marked
Music
Duration
Title
Up Folder
01:34
00:00/01:34
03:23
Up Folder
Navigation
OPTION
TO USE A USB DEVICE
MUSIC LIST Page 2/3
04:28
Page Change
MARK
Mark
Exit
No Marked
Music
Title
Up Folder
4395KB
1Kbps
Play
Play with Photo
00:00/01:34
Mark All
Delete
04:28
Close
Up Folder
Navigation
1
2
3
4
OPTION
Page Change
MARK
Mark
Exit
Select the target folder or drive.
► ►Play (During stop) : Play the selected music
titles.
Once a music finishes playing, the next selected one will be played. When there are no
selected music titles to play, the next one in the
current folder will be played.
► ►Play Marked : Play the selected music titles.
Once a music finishes playing, the next selected one will be played automatically.
► ►Stop Play (During playback) : Stop the playing
music titles.
► ►Play with Photo : Start playing the selected
music titles and then move to the Photo List.
► ►Mark All : Mark all music titles in the folder.
► ►Unmark All : Deselect all marked music titles.
► ►Delete : Delete the selected music titles.
► ►Close : Close the pop-up menu.
• Use the P
Select the desired music title.
Show the PopUp menu.
Select the desired PopUp menu.
button to navigate up/down in the
music page.
• Use MARK button to mark or unmark a music.
When one or more music files are marked, the
marked music title will be played in sequence.
For example, if you want to listen to only one
music repeatedly, just mark the music only
and play it. If no music is marked, all the music
in the folder will be played in sequence.
• Press the BACK button to return to normal TV viewing.
38
■ ■ If you don't press any button for a while during the playing, the
play information box (as shown in the below) will float as a
screen saver.
■ ■ The ‘Screen Saver’?
Screen saver is to prevent screen pixel damage due to an fixed
image remaining on the screen for a extended period of time.
! NOTE
TO USE A USB DEVICE
► ►When a music file is played,
is displayed behind the title.
► ►A damaged or corrupted music does not play but displays 00:00 in playtime.
? ►A music downloaded from a paid service with copyright protection does not start but displays inappropriate
►
information in playtime.
► ►If you press OK, ■ buttons, screen saver is stopped.
► ►This TV can not play music files less than 32 Kbytes.
► ►The PLAY(►), Pause(II), ■ , ►►, ◄◄ buttons on the remote control are also available in this mode.
► ►You can use the ►► button to select the next music and the ◄◄ button to select the previous music.
39
TO USE A USB DEVICE
MOVIE LIST
The movie list is activated once USB is detected. It is used when playing movie files on TV.
Displays the movies in the USB folder and supports Play.
Allows playback of all movies in the folder and user desired files.
Editing such as delete and add is not allowed.
It is a movie list that displays folder information and DivX file.
Supports up to four drives.
TO USE A USB DEVICE
MOVIE(*.avi/*.DivX) supporting file
Video format : MPEG1 , MPEG2, MPEG4 (Doesn’t support Microsoft MPEG4-V2, V3), DivX 3.xx ,
DivX 4.xx, DivX 5.xx , DivX VOD ( DRM ) , XviD, DivX 6.xx(Playback)
Audio format : Mpeg, Mp3, PCM, Dolby Digital, AC3.
Sampling frequency : 32 k to 48 kHz
Bit rate : 32 k to 320 kbps
Subtitle format : *.smi/ *.srt/ *.sub(MicroDVD, SubViewer 2.0)/ *.ass/ *.ssa/*.txt(DVD Subtitle System)
• Time information in an external subtitle file should be arranged in ascending order to be played.
• A DivX movie file and its subtitle file must be located in the same folder.
• A video file name and its subtitle file name must be identical for it to be displayed.
• If the video and audio structure of recorded file is not interleaved, either video or audio is outputted.
• Playing a video via a USB connection that does not support high speed may not work properly.
• USB storage devices below USB 2.0 are supported as well. But they may not work properly in the
movie list
• DivX may not be played depending on its types or recording methods.
• Max bitrate of playable DivX is 6 Mbps.
• Maximum FPS (Frame Per Second) can be reached only at SD level. FPS is 25 FPS (720*576) or
30 FPS (720*480) depending on Resolution.
• Files of 25 FPS or 30 FPS of higher may not be played properly.
• If the file is recorded with GMC, the unit supports only 1 point of recorded level.
(GMC is the acronym for Global Motion Compensation, a technique used to compensate MPEG Video files.)
• Use the left/right ( < / > ) keys to move to a specific frame forward or backward while playing a movie.
(The left/right ( < / > ) keys may not work properly for some files while playing a movie.)
Extension name
Video Decoder
Audio Codec
mpg, mpeg, mpe, vob, dat
MPEG1, MPEG2
AC3,MPEG,MP3,PCM
Avi, DivX, m4v
40
MPEG 4-SP, MPEG4-ASP, DivX 3.xx,DivX 4.xx,
DivX 5.xx, DivX 6.xx(Playback),Xvid
Resolution
720x576@25p
AC3,MPEG,MP3,PCM
720x480@30p
SCREEN COMPONENTS
1
2
Select USB.
Select Movie List.
2
1
2
3
4
Moves to upper level folder
Current page/Total pages
Total number of marked
movie title
Corresponding buttons on
the remote control
MOVIE LIST
3
Page 2/3
No Marked
movie
Title
Duration
Up Folder
640x480, 720KB
1
Up Folder
OPTION
4
Page Change
MARK
Mark
Exit
TO USE A USB DEVICE
Navigation
41
TO USE A USB DEVICE
MOVIE SELECTION AND POPUP MENU
MOVIE LIST Page 2/3
No Marked
movie
Duration
Title
Up Folder
1:340, 120KB
Up Folder
Navigation
OPTION
TO USE A USB DEVICE
MOVIE LIST Page 2/3
Page Change
MARK
Mark
Exit
No Marked
movie
Duration
Title
Up Folder
1366x768, 125KB
Play
Mark All
1:340, 120KB
Delete
Close
Up Folder
Navigation
1
2
3
4
OPTION
Page Change
MARK
Mark
Exit
► ►Play : Play the selected movie titles. DivX Play is
executed while screen changes.
► ►Play Marked : Play the selected movie titles. Once a
movie finishes playing, the next selected one will be
played automatically.
► ►Mark Al l : Mark all movie titles in the folder.
► ►Unmark Al l : Deselect all marked movie titles.
► ►Delete : Delete the selected movie titles.
► ►Close : Close the pop-up menu.
• In the case of files not supported, a message regard-
Select the target folder or drive.
ing non-supported file is displayed.
Select the desired movie title
Show the PopUp menu.
Select the desired PopUp menu.
• Press the BACK button to return to normal TV viewing.
42
DIVX AUDIO LANGUAGE & SUBTITLE LANGUAGE
Picture Size
◄
Full Screen
Subtitle Language
---
Audio Language
1/1
Subtitle File
---
. Language
Latin 1
. Sync
Subtitle Language
Support Language
Latin1
French, Spanish, Catalan Basque, Portuguese, Italian, Albanian, RhaetoRomanic, Dutch, German, Danish, Swedish, Norwegian, Finnish, Faroese,
Icelandic, Irish, Scottish, English
Latin2
Czech, Hungarian, Ploish, Romanian, Croatian, Slovak, Slovenian, Sorvian
Latin4
Estonian, the Baltic languages Latvian(Lettish) and Lithuanian, Greenlandic
and Lappish
Latin5
English, Trukish
Cyrillic
Bulgarian, Byelorussian, Macedonian, Russian, Serbian and pre-1990
(no ghe with upturn) Ukrainian
►
0
. Position
---
Greek
English, modern Greek
Hebrew
English, modern Hebrew
Chinese
Chinese
OK
Thai
Arabic
Select the desired PopUp
menu.
2
English, Arabic
• When DivX is playing, if you press the
RED button, this message is displayed.
Select Picture Size, Subtitle
Language, Audio Language,
Subtitle, Language, Sync or
Position
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
TO USE A USB DEVICE
1
Thai
USING THE REMOTE CONTROL
◄◄ / ►►
II
PLAY(►)
When playing,
repeatedly, press the REW(◄◄) button to speed up ◄◄ -> ◄◄◄ -> ◄◄◄◄
->◄◄◄◄◄ ->◄◄◄◄◄◄ .
repeatedly, press the FF(►►) button to speed up ►►-> ►►► -> ►►►►
->►►►►► -> ►►►►►►.
■ ■ Pressing these buttons repeatedly increases the fast forward/reverse speed.
During playback, press the Pause(II) button.
■ ■ Still screen is displayed.
■ ■ When using the or button during playback a cursor indicating the position can
be viewed on the screen.
Press the PLAY(►) button to return to normal playback.
43
TO USE A USB DEVICE
DIVX REGISTRATION CODE
Confirm the DivX registration code number of the TV. Using the registration number, movies can be
rented or purchased at www.divx.com/vod.
With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed.
(Only DivX files matched with the registration code of the purchased TV are playable.)
USB
Move
USB
OK
Move
OK
Photo List
Photo List
Music List
Music List
Movie List
DivXReg.
Reg. Code
Code
DivX
i
Your registration Code is: xxxxxxxxxx
Deactivation
Deactivation
DivX(R) Video On Demand
Movie List
DivX Reg.
Reg. Code
Code
DivX
To learn more visit www.divx.com/vod.
Close
1
Select USB.
2
TO USE A USB DEVICE
3
Select DivX Reg. Code.
Display DivX Reg. Code.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
Manufactured under license from Dolby Laboratories. “Dolby “and the double-D
symbol are trademarks of Dolby Laboratories.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary
of Rovi Corporation. . This is an official DivX Certified® device that plays DivX video. Visit
www.divx.com for more information and software tools to convert your files into DivX
video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in
order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com
for more information on how to complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its
subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;
7,519,274”
! NOTE
Supported movie file
?
44
Resolution : under 720 x 480(720x576) WxH pixels.
Frame rate : under 30 frames/sec
► ►Video Codec : MPEG1, MPEG2, MPEG4(Doesn’t support Microsoft MPEG4-V2, V3), DivX3.xx,
DivX4.xx, DivX5.xx, DivX VOD(DRM), XviD, DivX 6.xx(Playback).
► ►When loading, some buttons may not work.
► ►If you use the DivX registration code of another device, the rented or purchased DivX file cannot
be played. Therefore always use the DivX registration code assigned to this product.
DEACTIVATION
Delete the existing authentication information to receive a new DivX user authentication for TV.
Once this function is executed, a DivX user authentication is required again to see DivX DRM files.
USB
Move
USB
OK
Photo List
Photo List
Music List
Music List
Movie List
Movie List
DivX Reg. Code
DivX Reg. Code
Deactivation
Deactivation
Deactivation
Deactivation
DivX(R) Video On Demand
Do you want to deactivate your device?
1
2
3
No
OK
DivX(R) Video On Demand
This device is deactivated.
Your deactivation code : XXXXXXXX
To learn more visit www.divx.com/vod.
Close
Select USB.
Select Deactivation.
Select Yes.
TO USE A USB DEVICE
Yes
Move
4
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
45
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO) CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan, Original, 4:3, 14:9, Zoom and
Cinema Zoom1.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on
the screen and remain visible.
1
2
Select Aspect Ratio.
PICTURE or Q.Menu menu.
Select the desired picture format.
PICTURE CONTROL
• 16:9
The following selection will allow you to adjust the picture
horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
• Original
When your TV receives a wide screen signal it will automatically change to the picture format broadcast.
Original
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Note : If there is noise in original Picture, You
can see the noise at the edge.
Just Scan
46
•Y
ou can also adjust Aspect Ratio in the
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ratio, gray bars will appear on
both the left and right of the screen.
Full Wide
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is viewed
in the same way as in 4:3, but is magnified to the left and
right.
• Cinema Zoom1
Choose Cinema Zoom1 when you want to
enlarge the picture in correct proportion.
Note:When enlarging or reducing the picture,
the image may become distorted.
• Zoom
The following selection will allow you to view the
picture without any alteration, while filling the
entire screen. However, the top and bottom of
the picture will be cropped.
PICTURE CONTROL
! NOTE
► ►You can only select 4:3, 16:9 (Wide) in RGB mode only.
► ►In HDMI/Component (over 720p) mode, Just Scan is available.
?
47
PICTURE CONTROL
ENERGY SAVING
It reduces the plasma display’s power consumption.
The default factory setting complies with the Energy Star requirements and is adjusted to the comfortable level to be viewed at home.
You can increase the brightness of your screen by adjusting the Energy Saving level or by setting the
Picture Mode.
PICTURE
Move
PICTURE
OK
: 16:9
Aspect Ratio
: 16:9
Energy Saving
Saving
Energy
Picture Mode
:: Off
Off
: Vivid
Energy Saving
Saving
Energy
Picture Mode
:: Medium
Off
: Vivid
• Backlight
100
• Backlight
• Contrast
100
• Contrast
• Brightness
50
• Sharpness
70
Minimum
70
Medium
• Brightness Medium
90
• Sharpness Maximum
50
• Colour
70
• Colour
▼
1
PICTURE CONTROL
2
3
Move
Aspect Ratio
OK
Off
Screen
70 Off
▼
Select PICTURE.
Select
Energy Saving.
Select Off, Minimum, Medium, Maximum or Screen Off.
4
• When selecting Screen Off, the screen will be turned off after 3 seconds. In this case, if you want turn the
screen on, press any key on the set or the remote control or play the USB.
• If you adjust “Energy Saving-Minimum, Medium, Maximum”, Backl ight feature will not work.
• You can also adjust Energy Saving button.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
48
PRESET PICTURE SETTINGS
PICTURE MODE-PRESET
Vivid
Strengthen the contrast, brightness, colour and sharpness for vivid picture.
Standard
The most general screen display status.
Natural
The most natural screen display status.
Cinema
Optimizes video for watching movies.
Sport
Optimizes video for watching sports events.
Game
Optimizes video for playing games.
PICTURE
Aspect Ratio
Energy Saving
Move
OK
: 16:9
PICTURE
Aspect Ratio
: Off
Picture Mode
: :Standard
Vivid
• Backlight
• Contrast
• Brightness
Energy Saving
Move
: Off
Picture Mode
: :Standard
Vivid
100
• Backlight
100
• Contrast
50
• Sharpness
70
• Colour
70
▼
OK
: 16:9
Vivid
Vivid
Standard
70
Natural
• Brightness 90
Cinema
• Sharpness 50
Sport
• Colour
70 R
Game
▼
G
Expert1
Expert2
2
3
• Picture Mode adjusts the TV for the best
Select PICTURE.
Select Picture Mode.
Select Vivid, Standard, Natural,
Cinema, Sport or Game.
picture appearance. Select the preset
value in the Picture Mode menu based
on the programme category.
• You can also adjust Picture Mode in the
Q. Menu.
PICTURE CONTROL
1
4
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
49
PICTURE CONTROL
MANUAL PICTURE ADJUSTMENT
PICTURE MODE-USER OPTION
Backlight
To control the brightness of the screen, adjust the brightness of LCD panel.
Adjusting the backlight when setting the brightness of the set is recommended.
Contrast
Adjusts the signal level between black and white in the picture.
Brightness
Adjusts the base level of the signal in the picture.
Sharpness
Adjusts the level of crispness in the edges between the light and dark areas of the picture.
The lower the level, the softer the image.
Colour
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
PICTURE
Move
OK
: 16:9
: Off
: Standard
• Backlight
Contrast
•• Contrast
100
70
• Brightness
50
• Sharpness
70
• Colour
70
88
▼
100
▼
• Contrast
Picture Mode
▼
Energy Saving
▼
Aspect Ratio
OK
PICTURE CONTROL
▼
1
2
3
4
5
Select PICTURE.
• Benefits of using Backlight
Select Picture Mode.
- The black brightness is reduced. (As the
black has greater depth, you can enjoy a
better quality definition.)
- The electricity consumption is reduced by
up to 60 %.
Select Vivid, Standard, Natural, Cinema,
Sport or Game.
- You can adjust brightness with maintaining original signal resolution.
Select Backlight, Contrast, Brightness,
Sharpness, Colour or Tint.
Make appropriate adjustments.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
! NOTE
► ►You cannot adjust colour, sharpness and tint in the RGB-PC mode.
50
?
PICTURE IMPROVEMENT TECHNOLOGY
You can calibrate the screen for each Picture Mode or set the video value according to the special video
screen.
you can set the video value differently for each input.
To reset to the factory default screen after making adjustment to each video mode, execute the “Picture
Reset” function for each Picture Mode.
■ ■ Image shown may differ from your TV.
PICTURE
Move
PICTURE
OK
Move
▼
• Contrast
100
• Contrast
• Brightness
50
• Brightness
• Sharpness
70
• RSharpness
• Colour
60
• Colour
• Tint
0
R
G
• Advanced Control
• Picture Reset
Colour Temperature
50
Dynamic Contrast
70
Dynamic Colour
60
Noise
0 R ReductionG
• Tint
Gamma
• Advanced Control
• Picture Reset Black Level
Screen
Screen
OK
◄
Cool
►
High
High
Medium
Medium
Auto
Eye Care
Off
Film Mode
Off
Colour Gamut
Wide
▼
Close
2
3
4
Select PICTURE.
Select Advanced Control.
Select Colour Temperature, Dynamic Contrast, Dynamic Colour, Noise Reduction,
Gamma, Black Level, Eye Care, Film Mode, Colour Gamut, Edge Enhancer or OPC.
(Refer to p.53 to 54).
PICTURE CONTROL
1
Select your desired Source.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
51
PICTURE CONTROL
EXPERT PICTURE CONTROL
By segmenting categories, Expert1 and Expert2 provide more categories which users can set as they
see fit, offering the optimal picture quality for users.
As the detail item for video quality experts to adjust the video precisely using specific videos, this may
not be effective for general videos.
PICTURE
Move
PICTURE
OK
: Off
: :Standard
Expert1
• RV SharpnessNoise
60 Reduction
• Backlight
• Colour
Gamma
• Contrast
• Tint
R
Black Level
•Advanced Control
•Expert ControlFilm Mode
• Picture Reset
Colour Standard
OK
Picture Mode
Energy Saving
: 16:9
Move
50
Dynamic Contrast
• H Sharpness 70
Aspect Ratio
Vivid
Standard
70
Natural
• Brightness 90
Cinema
• Sharpness 50
Sport
• Colour
70 R
Game
▼
Screen
G
• Brightness
◄
►
Low
G
Auto
Off
SD
Colour Gamut
Standard
Edge Enhancer
Expert1
Expert1
Expert2
Off
Low
High
Colour Filter
Off
▼
Close
PICTURE CONTROL
1
2
3
4
5
6
Select PICTURE.
Select Picture Mode.
Select Expert1 or Expert2
Select Expert Control
Select your desired Source.
Make appropriate adjustmenrs.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
52
■ This feature is not available for all models.
Colour Temperature
Eye Care
(On/Off)
Film Mode
(On/Off)
■ ■ This function enables to select 'Low' or 'High' in the following mode:
AV(NTSC-M), HDMI or Component. Otherwise, 'Black level' is set to 'Auto'.
* This feature is not available for all models.
■ ■ Adjust the brightness of the screen to prevent the screen from being too bright.
Dims extremely bright pictures.
PICTURE CONTROL
■ ■ Choose one of three automatic colour adjustments. Set to warm to enhance hotter
colours such as red, or set to cool to make picture bluish
(Warm/Medium/Cool)
■ ■ Adjusts the contrast to keep it at the best level according to the brightness of theDynamic Contrast
screen. The picture is improved by making bright parts brighter and dark parts
(Off/Low/Medium/High)
darker.
■ ■ Adjusts screen colours so that they look livelier, richer and clearer. This feature
Dynamic Colour
enhances hue, saturation and luminance so that red, blue, green and white look
(Off/Low/High )
more vivid.
Noise Reduction
■ ■ Reduces screen noise without compromising video quality.
(Off/Low/Medium/High)
■ ■ You can adjust brightness of dark area and middle gray level area of the
picture.
Gamma
• Low : Make brighter and middle gray level area of the picture brighter.
(Low/Medium/High)
• Medium: Express original picture levels.
• High: Make dark and middle gray level area of the picture darker.
• Low : The picture of the screen gets darker.
• High : The picture of the screen gets brighter.
• Auto : Realizing the black level of the screen and set it to High or Low
Black Level
automatically.
(Low/High)
■ ■ Set black level of the screen to proper level.
■ ■ This feature is disable in “Picture Mode-Vivid, Cinema, Intelligent Sensor ”.
■ ■ You can watch a cinema-like video by eliminating judder effect.
■ ■ Use this function when you watch movies.
■ ■ This function can work when TruMotion is off.
53
PICTURE CONTROL
Colour Gamut
(Wide/Standard)
Edge Enhancer
(Off/Low/High)
• Standard : Mode to reproduce original colour according to the standard of
input signal independent of the display characteristics.
• Wide: Mode to use and set the rich colour area of the display.
■ ■ Shows clearer and distinctive yet natural corners of the video.
* This feature is not available for all models.
OPC
(On/Off)
Colour Standard
(SD/HD)
Colour Filter
(Off/Red/Green/Blue)
■ ■ As the technology to reduce the power consumption while keeping the same
brightness, this has the effect of reducing power consumption, improvement in
contrast.
■ ■ Converts the colour of a different video to HD colour. This function is set
for SD video (BT-601) and HD video (BT-709) colour format.
■ ■ This feature is enabled in “Picture Mode - Expert1/2”.
■ ■ This is the function to filter the specific colours of the video.
You can use the RGB filter to set colour saturation and hue accurately.
■ ■ This feature is enabled in “Picture Mode - Expert1/2”.
■ ■ This is the function to adjust the overall colour of the screen to the feeling
you want.
White Balance
• Red/Green/Blue Contrast, Red/Green/Blue Brightness: The adjustment
(Medium/Warm/Cool)
range is -50 to +50.
PICTURE CONTROL
■ ■ This feature is enabled in “Picture Mode - Expert1/2”..
■ ■ As the tool used by the experts to make adjustments by using the test patterns,
this does not affect other colours but can be used to selectively adjust the 6
colour areas (Red/Green/Blue/Cyan/Magenta/Yellow).
Colour difference may not be distinctive even when you make the adjustments
for the general video.
Colour Management
■ ■ Adjusts Red/Green/Blue/Yellow/Cyan/Magenta.
System
• Red/Green/Blue/Yellow/Cyan, Magenta Colour : The adjustment range is -30 to +30.
• Red/Green/Blue/Yellow/Cyan/Magenta Tint : The adjustment range is -30 to +30.
■ ■ This feature is disable in RGB-PC mode.
■ ■ This feature is enabled in “Picture Mode - Expert1/2”.
54
PICTURE RESET
Settings of the selected picture modes return to the default factory settings.
Move
▼
• Contrast
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
• Advanced Control
PictureReset
Reset
••Picture
R
2
4
• Contrast
• Brightness
50
• Colour
60
OK
100
• Tint
Resetting video
configuration.... 0
R
G
0R
G
•Colour Temp
• Advanced Control
PictureReset
Reset
••Picture
Screen
Select PICTURE.
Select Picture Reset.
PICTURE CONTROL
3
G
Move
Screen
1
PICTURE
OK
100
▼
PICTURE
Select Yes.
Initialize the adjusted value.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
55
PICTURE CONTROL
POWER INDICATOR
Adjust the power/standby indicator light on the front of the TV.
Standby Light
Determines whether to set the indicator light on the front of the TV to On or Of f in standby mode.
Power Light
Determines whether to set the indicator light on the front of the TV to On or Of f when the power turns on.
OPTION
Move
OPTION
OK
▼
Input Label
Move
OK
Input Label
SIMPLINK
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power
Indicator
ISM Method
: Normal
ISM Method
Power
Indicator
Demo Mode : Off
Demo Mode : Normal
: OffStanby Light
Mode Setting
: Home Use
Mode Setting
Factory Reset
◄
: Home Use
Power Light
Factory Reset
Off
►
On
▼
Close
PICTURE CONTROL
1
2
3
4
56
Select OPTION.
Select Power Indicator.
Select Standby Light or Power Light.
Select your desired Source.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
DEMO MODE
It is not possible to use Demo Mode in Home Use mode.
In Store Demo, Demo Mode is automatically set to On.
Once Demo Mode is set to Off in Store Demo, Demo Mode does not run and only the screen is reset.
The screen is reset automatically after 5 minutes in Demo Mode.
OPTION
Move
OPTION
OK
▼
: English
Menu Language
Input Label
Input Label
: On
SIMPLINK
: On
Key Lock
: Off
Key Lock
: Off
Set ID
:1
Set ID
:1
Power Indicator
: Normal
Off
3
4
Demo Mode
:: On
On
Demo Mode
Mode
Demo
:On
On
On(LED
On)
Mode Setting
: Store Demo
Mode Setting
: Store Demo
Select OPTION.
Select Demo Mode.
Select On or Off
To stop the Demo Mode, press any button.
Return to TV viewing.
If you want to stop the demo, press any button.
(except MUTE,
+ , - button)
PICTURE CONTROL
2
OK
: English
SIMPLINK
Power Indicator
1
Move
▼
Menu Language
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
57
PICTURE CONTROL
MODE SETTING
We recommend setting the TV to “Home Use ” mode for the best picture in your home environment.
“Store Demo ” mode is an optimal setting for displaying at stores.
OPTION
Move
!
!
?
?
OK
▼
Menu Language
Selecting the environment.
Chose the setting mode you want
Selecting the environment.
Chose the setting mode you want
: English
Store Demo
Input Label
SIMPLINK
: On
Key Lock
: Off
Set ID
:1
Home Use
Select [Store Demo] to use this TV in store. To use
this TV at home select [Home Use].
or
Store Demo
Home Use
Select [Home Use] to use this TV at Home. To use
this TV at store, select [Store Demo].
Power Indicator
Demo Mode
ModeSetting
Setting
Mode
PICTURE CONTROL
1
Select OPTION.
2
Select Mode Setting.
3
4
: Off
HomeDemo
Use
: Store
Select Store Demo or Home Use.
Save.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
58
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume if you change programmes.
Because each broadcasting station has its own signal conditions, volume adjustment may be needed
every time the channel is changed. This feature allows users to enjoy stable volume levels by making
automatic adjustments for each programme.
AUDIO
Move
: Off
Auto
AutoVolume
Volume
Clear Voice II
: Off
Clear Voice II
: Off
• Level
• Level
-
+
0
L
R
Balance
On
On
3-
+
0L
R
Sound Mode
: Standard
• Infinite Surround : Off
• Infinite Surround : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
Sound Mode
: Standard
OK
Off
▼
Select AUDIO.
Select Auto Volume.
SOUND & LANGUAGE CONTROL
3
: Off
3
▼
2
Move
Auto
Auto Volume
Volume
Balance
1
AUDIO
OK
Select On or Off.
4
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
59
SOUND & LANGUAGE CONTROL
CLEAR VOICE II
By differentiating the human sound range from others, it helps users listen to human voices better.
AUDIO
Move
AUDIO
OK
Auto Volume
: Off
Auto Volume
: Off
Clear
Clear Voice
Voice II
II
: :Off
Off
• Level
Clear Voice
Voice II
II
Clear
:: Off
Off
• Level
Balance
3
-
+
0
L
R
Balance
SOUND & LANGUAGE CONTROL
2
3
Off
Off
On3
0
+
L
R
: Standard
• Infinite Surround : Off
• Infinite Surround : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
: Standard
OK
-
Sound Mode
Sound Mode
▼
▼
1
Move
• If you select “On” for Clear Voice II,
Select AUDIO.
Infinite Surround feature will not work.
Select Clear Voice II.
Select On or Off.
ADJUSTMENT FOR CLEAR VOICE LEVEL WITH SELECTING ON
4
5
• Select levels from ‘-6’ to ’+6’.
Select Level.
Make desired adjustment.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
60
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Standard, Music, Cinema, Sport or Game and you can
also adjust the Treble, Bass.
Sound Mode lets you enjoy the best sound without any Special adjustment as the TV sets the appropriate sound options based on the programme content.
Standard, Music, Cinema, Sport and Game are preset for optimum sound quality at the factory.
Standard
Music
Cinema
Sport
Game
Offers standard-quality sound.
Optimizes sound for listening to music.
Optimizes sound for watching movies.
Optimizes sound for watching sports events.
Optimizes sound for playing games.
AUDIO
Move
AUDIO
OK
Auto Volume
: Off
Auto Volume
Clear Voice II
: Off
Clear Voice II
: Off
• Level
• Level
Balance
-
+
0
L
R
Balance
Sound Mode
Sound
:: Standard
Standard
• Infinite Surround : Off
Sound Mode
• Treble
50
• Bass
50
3
3
-
+
0
L
R
: :Standard
Standard
Standard
Standard
• Infinite Surround
: Off
Music
• Treble
• Bass
▼
50
Cinema
50
Sport
Game
• You can also adjust Sound Mode in the Q.
Menu.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or Game.
4
SOUND & LANGUAGE CONTROL
2
Select AUDIO.
OK
: Off
3
▼
1
Move
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
61
SOUND & LANGUAGE CONTROL
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer
AUDIO
Move
Auto Volume
AUDIO
OK
Auto Volume
: Off
Clear Voice II
: Off
• Level
Balance
Clear Voice II
: Off
3
-
+
• Level
0
L
R
Balance
3
SOUND & LANGUAGE CONTROL
4
5
3
-
+
0 LL
R
Sound Mode
• Infinite Surround : Off
• Infinite Surround : Off • Infinite Surround
• Treble
50
• Treble
50
• Treble
50 ◄
• Bass
50
• Bass
50
• Bass
50
: Standard (User)
▼
▼
2
OK
: Standard(User)
Sound Mode
1
Move
: Off
Off
Close
Select AUDIO.
Select Sound Mode.
Select Standard, Music, Cinema, Sport or Game.
Select Treble or Bass.
Set the desired sound level.
6
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
62
►
INFINITE SURROUND
Select this option to sound realistic.
AUDIO
Move
Auto Volume
AUDIO
OK
: Off
Clear Voice II
: Off
• Level
Balance
Auto Volume
Clear Voice II
: Off
3
-
+
• Level
0
L
R
Balance
2
3
OK
3
-
+
0 LL
R
Sound Mode
Sound
:: Standard
Standard(User)
• Infinite Surround : Off
Sound Mode
: Standard (User)
• Infinite
InfiniteSurround
Surround : Off • Infinite Surround ◄ Off ►
• Treble
50
• Treble
50
• Treble
• Bass
50
• Bass
50
• Bass
▼
1
Move
: Off
▼
50
Close
Select AUDIO.
Select Infinite Surround.
4
• Infinite Surround : Infinite Surround is a
patented LG proprietary sound processing
technology that strives immersive 5.1 surround sound impression with front two loudspeakers.
SOUND & LANGUAGE CONTROL
Select On or Off.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
63
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to preferred levels.
AUDIO
Move
Auto Volume
AUDIO
OK
: Off
Clear Voice II
: Off
• Level
Balance
Balance
Auto Volume
3
-
0 LL
Clear Voice II
: Off
+
• Level
R
Balance
Balance
2
SOUND & LANGUAGE CONTROL
3
3 L-
Balance
L0 L
Sound Mode
: Standard
Sound Mode
: Standard
• Infinite Surround : Off
• Infinite Surround : Off
• Treble
50
• Treble
50
• Bass
50
• Bass
50
▼
1
Move
OK
: Off
0
R
R+
◄
R
L
R
Close
▼
Select AUDIO.
Select Balance.
Make desired adjustment.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
64
►
TV SPEAKERS ON/ OFF SETUP
You can adjust the TV internal speaker status.
In AV, COMPONENT, RGB and HDMI with HDMI to DVI cable, the TV speaker can be operational even
when there is no video signal.
If you wish to use an external Hi-Fi system, turn off the TV’s internal speakers.
AUDIO
Move
AUDIO
OK
▼
: Level
Balance 3
-
+
0
-
+
Balance Sound Mode
: Standard
• Infinite Surround : Off
• Treble
50
• Bass
50
• Reset
TV Speaker
::On
On
1
OK
▼
Move
: Level
3
-
+
0
-
+
Sound Mode
: Standard
• Infinite Surround : Off
• Treble
50
• Bass
50
• Reset
TV Speaker
::On
On
Off
On
On
Select AUDIO.
2
Select TV Speaker.
Select On or Off.
4
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
SOUND & LANGUAGE CONTROL
3
! NOTE
► ►When the TV speaker is turned off while the Simplink home theater is operating, the sound output automatically switches to the Home theater speaker, but when the TV speaker is turned on, the sound output the
TV speaker.
?
65
SOUND & LANGUAGE CONTROL
AUDIO RESET
Settings of the selected Sound Mode return to the default factory settings.
AUDIO
Move
AUDIO
OK
Move
▼
: Level
Balance 1
2
SOUND & LANGUAGE CONTROL
3
▼
OK
3
-
+
0
-
+
Balance Sound Mode
: Standard
• Infinite Surround : Off
: Level
Sound Mode
3
-
+
0
-
+
: Standard
• Infinite Surround : Off
Resetting sound mode configuration...
• Treble
50
• Treble
50
• Bass
50
• Bass
50
Reset
•• Reset
• Reset
TV Speaker
: On
TV Speaker
: On
Select AUDIO.
Select Reset.
Initialize the adjusted value.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
66
I/II
STEREO/DUAL RECEPTION
When a programme is selected, the sound information for the station appears with the programme
number and station name.
1
2
Select Audio.
Select the sound output.
Broadcast
On Screen Display
Mono
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
■ ■ Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL
II or DUAL I+II.
DUAL ISends the primary broadcast language to the loudspeakers.
DUAL IISends the secondary broadcast language to the loudspeakers.
DUAL I+II Sends a separate language to each loudspeaker.
SOUND & LANGUAGE CONTROL
■ ■ Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved.
67
SOUND & LANGUAGE CONTROL
NICAM RECEPTION
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1
When NICAM mono is received, you can select NICAM MONO or FM MONO.
2
When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3
When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM
DUAL I+II or FM MONO.
SPEAKER SOUND OUTPUT SELECTION
SOUND & LANGUAGE CONTROL
68
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input
is sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
ON-SCREEN MENU LANGUAGE SELECTION
The installation guide menu appears on the TV screen when it is switched on for the first time.
1
Select your desired language.
* If you want to change Language/ Country selection
1
Select OPTION.
2
Select Menu Language.
3
Select your desired language.
4
Save.
SOUND & LANGUAGE CONTROL
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
! NOTE
► ►If you do not finish the set-up Installation Setup by pressing BACK or if you time out on the OSD (On Screen
Display) the installation menu will continuously appear until the set up is completed whenever the TV is
switched on.
?
69
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is unplugged, reset the clock.
TIME
Move
OK
Clock
Clock
TIME
Move
Clock
Clock
Off Time
: Off
Off Time
: Off
On Time
: Off
On Time
: Off
Sleep Timer
: Off
Sleep Timer
: Off
OK
Hour
16
Minute
09
Close
1
TIME SETTING
2
3
4
Select TIME.
Select Clock.
Select Hour or Minute.
Set the Hour or Minute.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
70
AUTO ON/OFF TIME SETTING
The Off time function automatically switches the TV to standby at a preset time.
Two hours after the TV is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed.
The Off time function overrides the On timer function if both are set to the same time.
The TV must be in standby mode for the On timer to work.
TIME
Move
TIME
OK
Clock
Move
OK
Clock
Off Time
: Off
Off Time
On Time
:: Off
On
On Time
Sleep Timer
: Off
Sleep Timer
23:59
: Off
Off
:: Off
Hour: Off
◄
On
►
00
Minute
00
Programme
1
Volume
30
Close
1
2
Select TIME.
Select Off Time or On Time.
When the On Time is selected
3
Set the hour, Minute, Programme, Volume.
• Press the Home/EXIT button to return to normal TV viewing.
• Press the BACK button to move to the previous menu screen.
TIME SETTING
4
Select Hour, Minute, Programme or Volume.
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you go to sleep.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
1
2
Select Sleep Timer.
Select Off, 10, 20, 30, 60, 90,
120, 180 or 240 min.
•W
hen you switch the TV off, the preset sleep timer
is cancelled.
•Y
ou can also adjust Sleep Timer in the TIME menu.
71
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-tothe-minute information on news, weather, television programmes, share
prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and
FASTEXT systems. SIMPLE (standard teletext) consists of a number of
pages which are selected by directly entering the corresponding page
number. TOP and FASTEXT are more modern methods allowing quick
and easy selection of teletext information.
Home
SWITCH ON/OFF
Press the TEXT button to switch to teletext. The initial page or last page
viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the
screen headline. The first page number indicates your selection, while the
second shows the current page displayed.
Press the TEXT button to switch off teletext. The previous mode reappears.
SIMPLE TEXT
■ ■ Page selection
1
Enter
the desired page number as a three digit number with the NUMBER buttons. If during selection
you press a wrong number, you must complete the three digit number and then re-enter the correct
page number.
2
The P
button can be used to select the preceding or following page.
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow
field denotes the next group and the blue field indicates the next block.
TELETEXT
■ ■ Block / group / page selection
1 With the blue button you can progress from block to block.
2 Use the yellow button to proceed to the next group with automatic overflow to the next block.
3 With the green button you can proceed to the next existing page with automatic overflow to the next
group.
4 Alternatively the P
button can be used.
The red button returns to the previous selection. Alternatively the P button can be used.
■ ■ Direct page selection
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the
NUMBER buttons in TOP mode.
72
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
■ ■Page selection
1
2
3
4
Press the T.OPT button and then use
button to select i menu. Display the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured
buttons.
AS with SIMPLE teletext mode, you can select a page by entering its three digit page number with
the NUMBER buttons in FASTEXT mode.
The P
button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
■ ■ Press the T. OPT button and then use
button to select the Text Option menu.
i
Text Option
■ ■Index
Select the each index page.
■ ■Time
When viewing a TV programme, select this menu to display the time at the top
right hand corner of the screen.
In the teletext mode, press this button to select a sub page number. The sub page
number is displayed at the bottom of the screen. To hold or change the sub page,
press the RED/GREEN, or NUMBER buttons.
Index
Time
Hold
Reveal
Update
Close
?
■ ■Reveal
TELETEXT
■ ■ Hold
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages.
The number of sub pages and the sub page displayed is, usually, shown on the screen below the time.
When this menu is selected the stop symbol is displayed at the top left-hand corner of the screen and
the automatic page change is inactive.
Select this menu to display concealed information, such as solutions to riddles or puzzles.
■ ■Update
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at
the top left hand corner of the screen. When the updated page is available then display will change to
the page number. Select this menu again to view the updated teletext page.
73
APPENDIX
TROUBLESHOOTING
The TV does not operate properly.
The remote control
does not work
■ ■ Check to see if there is any object between the TV and the remote control
causing an obstruction. Ensure you are pointing the remote control directly
at the TV.
■ ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -).
■ ■ Install new batteries.
■ ■ Is the sleep timer set?
Power is suddenly
■ ■ Check the power control settings. Has the Power supply been interrupted.
turned off
■ ■ If the TV is switched on and there is no input signal, it will switch off automatically after 15 minutes.
The video function does not work.
■ ■ Try another channel. The problem may be with the broadcast.
No picture & No sound
■ ■ Is the power cord inserted correctly into the mains?
■ ■ Check your antenna direction and/or location.
■ ■ Test the mains outlet by plugging another TV into the same outlet.
Picture appears slowly ■ ■ This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
after switching on
■ ■ Adjust Colour in menu option.
No or poor colour
or poor picture
■ ■ Allow a sufficient distance between the TV and the VCR.
■ ■ Try another channel. The problem may be with the broadcast.
■ ■ Are the video cables installed properly?
■ ■ Activate any function to restore the brightness of the picture.
Horizontal/vertical bars
or picture shaking
Poor reception on
some channels
Lines or streaks
in pictures
No picture
APPENDIX
74
when connecting
HDMI
■ ■ Check for local interference such as an electrical appliance or power tool.
■ ■ Station or cable channel experiencing problems, tune to another station.
■ ■ Station signal is weak, reposition the antenna to receive weaker stations.
■ ■ Check for sources of possible interference.
■ ■ Check antenna (Change the position of the antenna).
■ ■ Check that your HDMI cable is High Speed HDMI Cable.
If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display
can result. Please use the High Speed HDMI Cable.
The audio function does not work.
■ ■ Check whether the TV is switched on.
Picture OK & No
sound
No output from one
of the speakers
Unusual sound from
inside the TV
■
■
■
■
■ Press the
+ or - button.
■ Sound muted? Press MUTE button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■ ■ Adjust Balance in menu option.
■ ■ A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
No sound when con- ■ ■ Check HDMI cable is High Speed HDMI Cable.
necting HDMI or USB ■ ■ Check USB cable over version 2.0.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range
(Invalid format)
Vertical bar or stripe on
background &
Horizontal Noise &
Incorrect position
Screen colour is
unstable or single
colour
■ ■ Adjust resolution, horizontal frequency, or vertical frequency.
■ ■ Check the input source.
■ ■ Use Auto configure or adjust size, phase, or H/V position. (Option)
■ ■ Check the signal cable.
■ ■ Reinstall the PC video card.
There is a problem with PICTURE settings.
When the user changes the picture settings, ■ ■ It means that the TV is currently set to Store Demo mode.
To switch to Home use mode you should do the followings: From the TV
the TV automatically
Menu, choose OPTION -> Choose Mode Setting -> Choose Home use.
converts back to the
initial settings after a
Now, you have completed switching to the Home use mode.
certain period of time.
APPENDIX
75
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to switch the power off and unplug the power cord before you begin any cleaning.
CLEANING THE SCREEN
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it is almost
dry, and then use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before
switching on.
CLEANING THE CABINET
!
■ ■ To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ ■ Do not to use a wet cloth.
?
EXTENDED ABSENCE
CAUTION
► ►If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power cord to
protect against possible damage from lightning or power surges.
APPENDIX
76
PRODUCT SPECIFICATIONS
22LK3**
26LK3**
22LK310-TA / 22LK310-TG
22LK311-TB / 22LK311-TH
22LK310Y-TA
26LK310-TA / 26LK310-TG
26LK311-TB / 26LK311-TH
26LK310Y-TA / 26LK310Y-TG
with stand
526.0 mm x 377.0 mm x 165.0 mm
663.0 mm x 484.0 x mm 207.0 mm
without stand
526.0 mm x 331.0 mm x 65.0 mm
663.0 mm x 423.0 mm x 79.9 mm
with stand
without stand
4.3 kg
7.6 kg
4.0 kg
6.5 kg
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
Dimensions
(Width x Height x
Depth)
Weight
Power requirement
32LK3**
32LK310-TA / 32LK310-TG
32LK311-TB / 32LK311-TH
32LK310Y-TA / 32LK310Y-TG
MODELS
Dimensions
(Width x Height x
Depth)
Weight
with stand
800.0 mm x 565.0 mm x 207.0 mm
without stand
800.0 mm x 509.0 mm x 73.8 mm
with stand
without stand
9.6 kg
8.6 kg
Power requirement
AC 100-240 V~ 50 / 60 Hz
32LK4**
42LK4**
32LK410-TB / 32LK410-TH
42LK410-TB / 42LK410-TH
with stand
799.0 mm x 555.0 mm x 207.0 mm
1023.0 mm x 685.0 mm x 261.0 mm
without stand
799.0 mm x 516.0 mm x 73.5 mm
1023.0 mm x 644.0 mm x 76.6 mm
with stand
without stand
9.6 kg
15.4 kg
8.6 kg
13.7 kg
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
Dimensions
(Width x Height x
Depth)
Weight
Power requirement
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Programme Coverage
VHF: NZ1 to E21, UHF: E21 to E69, CATV: S1 to S20, HYPER: S21 to S47
External Antenna Impedance
Operating Temperature
Environment condition
0 °C to 40 °
Operating Humidity
Less than 85 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Refer to p. 40
■ ■ The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
Supported movie files
75 Ω
77
APPENDIX
Dimensions
22LV2130-TD / 22LV2130-TK
22LV213Y-TD
455.2 mm x 355.0 mm x 145.0 mm
526.0 mm x 396.0 mm x 145.0 mm
without stand
455.2 mm x 313.1 mm x 40.9mm
526.0 mm x 352.0 mm x 40.9 mm
with stand
without stand
2.7 kg
3.4 kg
2.5 kg
3.2 kg
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
26LV2***
32LV2***
26LV2130-TD / 26LV2130-TK
26LV213Y-TD
32LV2130-TD / 32LV2130-TK
32LV213Y-TD
with stand
635.6 mm x 475.0 mm x 169.0 mm
777.0 mm x 552.0 mm x 216.0 mm
without stand
635.6 mm x 413.5 mm x 40.9 mm
777.0 mm x 501.0 mm x 35.4 mm
with stand
without stand
5.4 kg
11.5 kg
5.0 kg
10.7 kg
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
with stand
(Width x Height x
Depth)
Weight
Power requirement
MODELS
Dimensions
(Width x Height x
Depth)
Weight
Power requirement
32LV3***
42LV3***
32LV3100-TA
42LV3100-TA
with stand
768.0 mm x 555.0 mm x 240.0 mm
1000.0 mm x 694.0 mm x 257.0 mm
without stand
768.0 mm x 492.0 mm x 45.0 mm
1000.0 mm x 623.0 mm x 43.0 mm
with stand
without stand
11.0 kg
14.8 kg
9.3 kg
12.4 kg
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
Dimensions
(Width x Height x
Depth)
Weight
Power requirement
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Programme Coverage
VHF: NZ1 to E21, UHF: E21 to E69, CATV: S1 to S20, HYPER: S21 to S47
External Antenna Impedance
Operating Temperature
Environment condition
Operating Humidity
Storage Temperature
Storage Humidity
Supported movie files
22LV2***
19LV2***
19LV2130-TD
19LV213Y-TD
MODELS
75 Ω
0 °C to 40 °C (32 °F to 104 °F)
Less than 85 %
-20 °C to 60 °C (-4 °F to 140 °F)
Less than 85 %
Refer to p. 40
■■ The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
78
IR CODES
*This feature is not available for all models.
Code (Hexa)
Function
Note
08
POWER
R/C BUTTON
95
Energy Saving
R/C BUTTON
0B
INPUT
R/C BUTTON
0F
TV
R/C BUTTON
45
Q.MENU
R/C BUTTON
43
Home
R/C BUTTON
7C
R/C BUTTON
40
Up ( )
R/C BUTTON
41
Down ( )
R/C BUTTON
07
Left ( )
R/C BUTTON
06
Right ( )
R/C BUTTON
44
OK (⊙)
R/C BUTTON
28
BACK (
30
AV MODE
)
R/C BUTTON
R/C BUTTON
02
+
R/C BUTTON
03
-
R/C BUTTON
1E
FAV ( MARK )
R/C BUTTON
79
RATIO
R/C BUTTON
09
MUTE
R/C BUTTON
00
P
R/C BUTTON
01
P
R/C BUTTON
Number Key 0 to 9
R/C BUTTON
53
LIST
R/C BUTTON
1A
Q.VIEW
R/C BUTTON
72
RED Key
R/C BUTTON
71
GREEN Key
R/C BUTTON
63
YELLOW Key
R/C BUTTON
61
BLUE Key
R/C BUTTON
20
TEXT
R/C BUTTON
21
T.OPT(T.Option)
R/C BUTTON
10 to 19
7E
R/C BUTTON
EXIT
R/C BUTTON
B1
▀
R/C BUTTON
B0
►
R/C BUTTON
BA
l l Pause
R/C BUTTON
8F
◄◄ Rew
R/C BUTTON
8E
►► FF
R/C BUTTON
APPENDIX
5B
79
APPENDIX
EXTERNAL CONTROL DEVICE SETUP
RS-232C SETUP
Connect the RS-232C (serial port) input jack to an
external control device (such as a computer or an
A/V control system) to control the product’s functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
Note:
RS-232C connection cables are not supplied with
the product.
2
In USB, it doesn’t support RS-232C function.
RGB IN (PC)
1
AUDIO IN
(RGB/DVI)
L - AUDIO OUT - R VIDEO
/MONO
AUDIO
/DVI IN
Y
P
TYPE OF CONNECTOR; D-SUB 9-PIN MALE
VIDEO
B
L
ANT IN
R
No.
PUT
TCH
O
RS-232C IN
(CONTROL)
ANT OUT
L
1
2
3
4
5
6
7
8
9
R
PR
L
AUDIO
COMPONENT IN
R
AV IN1
EO
AUDIO
DVI-PC OUTPUT
ANTENNA
IN
Pin Name
No connection
RXD (Receive data)
TXD (Transmit data)
DTR (DTE side ready)
GND
DSR (DCE side ready)
RTS (Ready to send)
CTS (Clear to send)
No Connection
1
5
6
9
RS-232C CONFIGURATIONS
3-Wire Configurations(Not standard)
7-Wire Configurations (Standard RS-232C cable)
APPENDIX
80
RS-232C IN
(CONTROL)
RXD TXD
GND
DTR
DSR
RTS
CTS
USB IN
SERVICE ONLY
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
8
7
D-Sub 9
D-Sub 9
TXD
RXD
GND
DSR
DTR
CTS
RTS
RXD TXD
GND
DTR
DSR
RTS
CTS
RS-232C IN
(CONTROL)
PC
TV
2
3
5
4
6
7
8
3
2
5
6
4
7
8
D-Sub 9
D-Sub 9
USB IN
SERVICE ONLY
TXD
RXD
GND
DTR
DSR
RTS
CTS
SET ID
Use this function to specify a set ID number.
Refer to ‘Real Data Mapping’. ► p.85
OPTION
Menu Language
Move
OK
: English
SIMPLINK
: On
SIMPLINK
Key Lock
: Off
Key Lock
Set ID
::11
Set ID
3
OK
: English
: On
: Off
◄
::11
Power Indicator
Power Indicator
2
Menu Language
Move
Input Label
Input Label
1
OPTION
1
►
Close
Demo Mode
: Off
Demo Mode
: Off
Mode Setting
: Store Demo
Mode Setting
: Store Demo
Select OPTION.
Select Set ID.
Adjust Set ID to choose the desired TV ID number.
The adjustment range of SET ID is 1 to 99.
APPENDIX
• Press BACK to move to the previous menu screen.
81
APPENDIX
COMMUNICATION PARAMETERS
■ ■ Baud rate : 9600 bps (UART)
■ ■ Data length : 8 bits
■ ■ Parity : None
■ ■ Stop bit : 1 bit
■ ■ Communication code : ASCII code
■ ■ Use a crossed (reverse) cable.
Command Reference List
COMMAND
1
COMMAND
2
DATA
(Hexadecimal)
COMMAND
1
COMMAND
2
DATA
(Hexadecimal)
01. Power
k
a
00 to 01
14. Colour Temperature
k
u
00 to 64
02. Aspect Ratio
k
c
03. Screen Mute
k
d
Refer to p. 83
15. Treble
k
r
00 to 64
Refer to p. 83
16. Bass
k
s
04. Volume Mute
k
e
00 to 64
00 to 01
17. Abnormal Status
k
z
FF
05. Volume Control
k
06. Contrast
k
f
00 to 64
18. Control Back Light
m
g
Refer to p. 85
g
00 to 64
19. Auto Configure
j
u
07. Brightness
k
01
h
00 to 64
20. Eneregy Saving
j
q
Refer to p. 85
08. Colour
09. Tint
k
i
00 to 64
21. Tune Command
m
a
Refer to p. 85
k
j
00 to 64
22. Channel Skip
m
b
00 to 01
10. Sharpness
k
k
00 to 64
23. Key
m
c
Refer to p. 85
11. OSD Select
k
l
00 to 01
24. Input select (Main)
x
b
Refer to p. 85
12. Remote Control Lock
/ Key Lock Mode
k
m
00 to 01
13. Balance
k
t
00 to 64
Transmission / Receiving Protocol
APPENDIX
82
Transmission
OK Acknowledgement
[Command1][Command2][ ][Set ID][ ][Data][Cr]
[Command2][ ][Set ID][ ][OK][Data][x]
* [Command 1] : First command to control the set.
(j, k, m or x)
* [Command 2] : Second command to control the set.
: You can adjust the set ID to choose
* [Set ID]
desired TV ID number in Setup menu.
Adjustment range is 1 to 99.
When selecting Set ID ‘0’, every connected TV is controlled. Set ID is indicated as decimal (1 to 99) on menu and
as Hexa decimal (0x0 to 0x63) on transmission/receiving protocol.
: To transmit command data.
* [DATA] Transmit ‘FF’ data to read status of
command.
[Cr]
:
Carriage
Return
*
ASCII code ‘0x0D’
: ASCII code ‘space (0x20)’
* [ ]
* The TV transmits ACK (acknowledgement) based on
this format when receiving normal data. At this time,
if the data is data read mode, it indicates present
status data. If the data is data write mode, it returns
the data of the PC computer.
Error Acknowledgement
[Command2][ ][Set ID][ ][NG][Data][x]
TV transmits ACK(acknowledgement) based on this
format when receiving abnormal data form non-viable
functions or communication errors.
[Command 2] : use as command.
[Set ID]: use the small character, if set ID is 10, TV will
send the ‘0’, ‘a’
[Data]: use the small character, if data is 0xab, TV will
send the ‘a’, ‘b’.
[NG]: use the large character.
01. Power (Command: k a)
► ► To control Power On/Off of the TV.
Transmission
[k][a][ ][Set ID][ ][Data][Cr]
Data00 : Power Off
01 : Power On
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
► ► To show Power On/Off.
Transmission
04. Volume Mute (Command: k e)
► ► To control volume mute on/off.
You can also adjust mute using the MUTE button
on remote control.
Transmission
[k][e][ ][Set ID][ ][Data][Cr]
Data00 : Volume mute on (Volume off)
01 : Volume mute off (Volume on)
Acknowledgement
[e][ ][Set ID][ ][OK/NG][Data][x]
[k][a][ ][Set ID][ ][FF][Cr]
05. Volume Control (Command: k f)
Acknowledgement
[a][ ][Set ID][ ][OK/NG][Data][x]
* If there is the time delay between command and ack
message during power on sequence, It should
be described like “Note: In this model, TV will send
the Acknowledge after power on processing completion.There might be a time delay between command and acknowledge.”
► ► To adjust volume.
You can also adjust volume with the VOLUME
buttons on remote control.
Transmission
[k][f][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[f][ ][Set ID][ ][OK/NG][Data][x]
02. Aspect Ratio (Command: k c) (Main Picture Size)
► ► To adjust the screen format. (Main picture format)
You can also adjust the screen format using the
Aspect Ratio in the PICTURE menu.
Transmission
[k][c][ ][Set ID][ ][Data][Cr]
Data 01 : Normal screen (4:3)
02 : Wide screen (16:9)
04 : Zoom
10 to 1F : Cinema Zoom1 1 to 16
Acknowledgement
Data 06 : Original
07 : 14 : 9
09 : Just Scan
[c][ ][Set ID][ ][OK/NG][Data][x]
* Using the RGB-PC, Component or HDMI input, you
select either 16:9 or 4:3 screen aspect ratio.
* In HDMI/Component (over 720p)mode, Just Scan is
available.
03. Screen Mute (Command: k d)
► ► To select screen mute on/off.
Transmission
[d][ ][Set ID][ ][OK/NG][Data][x]
[k][g][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[g][ ][Set ID][ ][OK/NG][Data][x]
07. Brightness (Command: k h)
► ► To adjust screen brightness.
You can also adjust brightness in the PICTURE menu.
Transmission
[k][h][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[h][ ][Set ID][ ][OK/NG][Data][x]
08. Colour (Command: k i)
► ► To adjust the screen colour.
You can also adjust colour in the PICTURE menu.
Transmission
[k][i][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 85
Acknowledgement
APPENDIX
[k][d][ ][Set ID][ ][Data][Cr]
Data 00 : Screen mute off (Picture on)
Video Mute off
Data 01 : Screen mute on (Picture off)
Data 10 : Video Mute on
Acknowledgement
06. Contrast (Command: k g)
► ► To adjust screen contrast.
You can also adjust contrast in the PICTURE menu.
Transmission
[i][ ][Set ID][ ][OK/NG][Data][x]
83
APPENDIX
09. Tint (Command: k j)
► ► To adjust the screen tint.
You can also adjust tint in the PICTURE menu.
Transmission
[k][j][ ][Set ID][ ][Data][Cr]
DataRed : 00 to Green : 64
* Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[j][ ][Set ID][ ][OK/NG][Data][x]
10. Sharpness (Command: k k)
► ► To adjust the screen sharpness.
You can also adjust sharpness in the PICTURE menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[k][ ][Set ID][ ][OK/NG][Data][x]
11. OSD Select (Command: k l)
► ► To select OSD (On Screen Display) on/off when
controlling remotely.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 00 : OSD off
Acknowledgement
01 : OSD on
[l][ ][Set ID][ ][OK/NG][Data][x]
12. Remote control lock / Key Lock Mode
(Command: k m)
► ► To lock the remote control and the front panel controls
on the set.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data00 : Lock off
Acknowledgement
01 : Lock on
[m][ ][Set ID][ ][OK/NG][Data][x]
* When main power is on/off, remote control lock is
released.
* In the standby mode, if key lock is on, TV will not
turn on by power on key of IR & Local Key.
APPENDIX
84
13. Balance (Command: k t)
► ► To adjust balance.
You can also adjust balance. in the AUDIO menu.
Transmission
[k][t][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[t][ ][Set ID][ ][OK/NG][Data][x]
14. Colour Temperature (Command: k u)
► ► To adjust colour temperature.
You can also adjust Colour Temperature in the
PICTURE menu.
Transmission
[k][u][ ][Set ID][ ][Data][Cr]
Data 00: Medium 01: Cool 02: Warm
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
15. Treble (Command: k r)
► ► To adjust Treble.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
DataMin : 00 to Max : 64
* Refer to ‘Real data mapping 1’. See page 85
Acknowledgement
[r][ ][Set ID][ ][OK/NG][Data][x]
16. Bass (Command: k s)
► ► To adjust bass
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 to Max: 64
* Refer to ‘Real data mapping 1’. See page 85.
Acknowledgement
[s][ ][Set ID][ ][OK/NG][Data][x]
17. Abnormal State (Command: k z)
► ►To recognize an abnormal state.
Transmission
[k][z][ ][Set ID][ ][Data][Cr]
Acknowledgement
[z][ ][Set ID][ ][OK/NG][Data][x]
Data FF: Read
Data 00: Normal (Power on and signal exist)
Data 01: No signal (Power on)
Data 02: Turn the TV off by remote control
Data 03: Turn the TV off by sleep time function
Data 04: Turn the TV off by RS-232C function
Data 05: 5V down
Data 06: AC down
Data 07: Turn the TV off by Fan Alarm function (option)
Data 08: Turn the TV off by Off time function
Data 09: Turn the TV off by Auto off function
Data a: Turn the TV off by AV board detection.
* This function is “read only”.
18. Control Back Light (Command: m g )
► ► To Control the back light.
Transmission
[m][g][ ][Set ID][ ][Data][Cr]
Data : data Min: 00 to Max: 64
(* transmit by Hexadecimal code)
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
19 . Auto Configure (Command: j u)
► ► To adjust picture position and minimize image shaking
automatically. It works only in RGB (PC) mode.
Transmission
[j][u][ ][Set ID][ ][Data][Cr]
Data01: To set
Acknowledgement
[u][ ][Set ID][ ][OK/NG][Data][x]
20. Energy Saving (Command: j q)
► ► To reduce the power consumption of the TV.
Transmission
[j][q][ ][Set ID][ ][Data][Cr]
Data Min: 00H to Max: 05H
Data 00 : Off
01 : Minimum
02 : Medium
03 : Maximum
05 : Screen Off
Acknowledgement
[q][ ][Set ID][ ][OK/NG][Data][x]
21. Tune Command/ Channel Tuning (Command: m a)
► ► Tune Channel to following Physical number.
Transmission
[m][a][ ][Set ID][ ][Data0][ ][Data1][ ][Data2][Cr]
Data0: 00
Data1: Min: 00 to Max: C7
* Refer to ‘Real data mapping 1’ See page 85.
Data2: 00
Acknowledgement
[a][ ][Set ID][OK][ ][Data0][Data1][x]
[a][ ][Set ID][NG][ ][Data0][x]
22. Channel Skip(Command: m b)
[m][c][ ][Set ID][ ][Data][Cr]
Data: Key code - Refer to page 79.
Acknowledgement
[c][ ][Set ID][ ][OK/NG][Data][x]
24. Input select (Command: x b)
(Main Picture Input)
► ► To select input source for TV.
Transmission
[x][b][ ][Set ID][ ][Data][Cr]
Data : Structure
MSB
0
0
0
0
External Input
External Input
0
LSB
0
0
Input Number
Data
Analogue
0
0
0
1
0
0
1
0
AV
0
1
0
0
Component
0
1
1
0
RGB-PC
1
0
0
1
HDMI
INPUT Number
0
Data
0
0
0
0
Input1
0
0
0
1
Input2
0
0
1
0
Input3
0
0
1
1
Input4
Acknowledgement
[b][ ][Set ID][ ][OK /NG][Data][x]
* Real data mapping 1
00 : Step 0
A:
Step 10
F:
10 :
Step 15
Step 16
64 :
Step 100
6E : Step 110
[m][b][ ][Set ID][ ][Data][Cr]
Data 00 : Skip
01 : Add
73 :
74 :
Acknowledgement
C7 : Step 199
[b][ ][Set ID][ ][OK/NG][Data][x]
Step 115
Step 116
FE : Step 254
FF : Step 255
APPENDIX
► ► To set skip status for the current Programme.
Transmission
23. Key (Command: m c)
► ► To send IR remote key code.
Transmission
85
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring
any service.
Model :
Serial No. :
Download PDF

advertising