LG | 42LB620T | LG 42LB620T Owner’s Manual

ENGLISH
ENG
OWNER’S MANUAL
*
LED TV
* Disclaimer
LG LED TV applies LCD screen with LED backlights.
Please read this manual carefully before operating
your set and retain it for future reference.
LB56**
LB55**
LB62**
www.lg.com
2
LICENSES / OPEN SOURCE SOFTWARE NOTICE
ENGLISH
ENG
LICENSES
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
Manufactured under license from Dolby Laboratories. “Dolby” and the
double-D symbol are trademarks of Dolby Laboratories.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the
HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC
in the United States and other countries.
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC,
a subsidiary of Rovi Corporation. This is an official DivX Certified® device
that has passed rigorous testing to verify that it plays DivX video. Visit divx
com for more information and software tools to convert your files into DivX
videos.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must
be registered in order to play purchased DivX Video-on-Demand (VOD)
movies. To obtain your registration code, locate the DivX VOD section in
your device setup menu. Go to vod.divx.com for more information on how to
complete your registration.
“DivX Certified® to play DivX® video up to HD 1080p, including premium
content.”
“DivX®, DivX Certified® and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.”
“Covered by one or more of the following U.S. patents :
7,295,673; 7,460,668; 7,515,710; 7,519,274”
(Only LB62**)
For DTS patents, see http://patents.dts.com. Manufactured under license
from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS 2.0+Digital Out is a trademark
of DTS, Inc. © DTS, Inc. All Rights Reserved.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained
in this product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices
are available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased
the product.
Safety Instructions
Please read these safety precautions carefully before using the product.
WARNING
yyDo not place the TV and/or remote
control in the following environments:
--A location exposed to direct sunlight
--An area with high humidity such as a
bathroom
--Near any heat source such as stoves
and other devices that produce heat
--Near kitchen counters or humidifiers
where they can easily be exposed to
steam or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric
shock, malfunction or product deformation.
yyDo not place the product where it might
be exposed to dust.
This may cause a fire hazard.
yyMains Plug is the TV connecting/
disconnecting device to AC mains electric
supply. This plug must remain readily
attached and operable when TV is in use.
yyDo not touch the power plug with wet
hands. Additionally, if the cord pin is wet
or covered with dust, dry the power plug
completely or wipe dust off.
You may be electrocuted due to excess
moisture.
yyMake sure to connect Mains cable
to compliant AC mains socket with
Grounded earth pin. (Except for devices
which are not grounded on earth.)
Otherwise possibility you may be
electrocuted or injured.
yyInsert power cable plug completely into
wall socket otherwise if not secured
completely into socket, fire ignition may
break out.
yyEnsure the power cord does not come
into contact with hot objects such as a
heater.
This may cause a fire or an electric shock
hazard.
yyDo not place a heavy object, or the
product itself, on power cables.
Otherwise, this may result in fire or
electric shock.
yyBend antenna cable between inside and
outside building to prevent rain from
flowing in.
This may cause water damaged inside
the Product and could give an electric
shock.
ENGLISH
ENG
Safety Instructions
3
4
Safety Instructions
ENGLISH
ENG
yyWhen mounting TV onto wall make sure
to neatly install and isolate cabling from
rear of TV as to not create possibility of
electric shock /fire hazard.
yyDispose of used batteries carefully
to ensure that a small child does not
consume them. Please seek DoctorMedical Attention immediately if child
consumes batteries.
yyDo not plug too many electrical devices
into a single multiple electrical outlet.
Otherwise, this may result in fire due to
over-heating.
yyDo not insert any metal objects/
conductors (like a metal chopstick/
cutlery/screwdriver) between power cable
plug and input Wall Socket while it is
connected to the input terminal on the
wall. Additionally, do not touch the power
cable right after plugging into the wall
input terminal. You may be electrocuted.
(Depending on model)
yyDo not drop the product or let it fall over
when connecting external devices.
Otherwise, this may result in injury or
damage to the product.
yyKeep the anti-moisture packing material
or vinyl packing out of the reach of
children.
Anti-moisture material is harmful if
swallowed. If swallowed by mistake, force
the patient to vomit and visit the nearest
hospital. Additionally, vinyl packing can
cause suffocation. Keep it out of the
reach of children.
yyDo not let your children climb or cling
onto the TV. Otherwise, the TV may fall
over, which may cause serious injury.
yyDo not put or store inflammable
substances near the product. There
is a danger of combustion/explosion
or fire due to careless handling of the
inflammable substances.
yyDo not drop metallic objects such as
coins, hair pins, chopsticks or wire into
the product, or inflammable objects such
as paper and matches. Children must
pay particular attention. Electrical shock,
fire or injury can occur. If a foreign object
is dropped into the product, unplug the
power cord and contact the service
centre.
yyDo not spray water on the product or
scrub with an inflammable substance
(thinner or benzene). Fire or electric
shock accident can occur.
Safety Instructions
yyNever touch this product or antenna
during a thunder or lighting storm.
You may be electrocuted.
yyNever touch the wall outlet when there is
leakage of gas, open the windows and
ventilate.
It may cause a fire or a burn by a spark.
yyUnplug the TV from AC mains wall socket
if you do not intend to use the TV for a
long period of time. Accumulated dust
can cause fire hazard and insulation
deterioration can cause electric leakage/
shock/fire.
yyApparatus shall not be exposed to
dripping or splashing and no objects
filled with liquids, such as vases, shall be
placed on the apparatus.
yyDo not install this product on a wall if it
could be exposed to oil or oil mist.
This may damage the product and cause
it to fall.
CAUTION
yyDo not disassemble, repair or modify the
product at your own discretion.
Fire or electric shock accident can occur.
Contact the service centre for check,
calibration or repair.
yyIf any of the following occur, unplug the
product immediately and contact your
local service centre.
--The product has been impacted by
shock
--The product has been damaged
--Foreign objects have entered the
product
--The product produced smoke or a
strange smell
This may result in fire or electric shock.
yyInstall the product where no radio wave
occurs.
yyThere should be enough distance
between an outside antenna and power
lines to keep the former from touching the
latter even when the antenna falls.
This may cause an electric shock.
yyDo not install the product on places such
as unstable shelves or inclined surfaces.
Also avoid places where there is vibration
or where the product cannot be fully
supported. Otherwise, the product may
fall or flip over, which may cause injury or
damage to the product.
ENGLISH
ENG
yyDo not allow any impact, shock or any
objects to fall into the unit, and do not
drop anything onto the screen.
You may be injured or the product can be
damaged.
5
6
Safety Instructions
ENGLISH
ENG
yyIf you install the TV on a stand, you need
to take actions to prevent the product
from overturning. Otherwise, the product
may fall over, which may cause injury.
yyDo not place non-rechargeable batteries
in charging device.
yyMake sure there are no objects between
the remote control and its sensor.
yyIf you intend to mount the product to a
wall, attach VESA standard mounting
interface (optional parts) to the back of
the product. When you install the set to
use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
yyOnly use the attachments / accessories
specified by the manufacturer.
yySignal from Remote Control can
be interrupted due to external/
internal lighting eg Sunlight, fluorescent
lighting.If this occurs turn off lighting or
darken viewing area.
yyWhen installing the antenna, consult
with a qualified service technician. If not
installed by a qualified technician, this
may create a fire hazard or an electric
shock hazard.
yyWhen connecting external devices such
as video game consoles, make sure the
connecting cables are long enough.
Otherwise, the product may fall over,
which may cause injury or damage the
product.
yyWe recommend that you maintain a
distance of at least 2 to 7 times the
diagonal screen size when watching TV.
If you watch TV for a long period of time,
this may cause blurred vision.
yyDo not turn the product On/Off by
plugging-in or unplugging the power plug
to the wall outlet. (Do not use the power
plug for switch.)
It may cause mechanical failure or could
give an electric shock.
yyOnly use the specified type of battery.
This could cause damage to the remote
control.
yyPlease follow the installation instructions
below to prevent the product from
overheating.
--The distance between the product and
the wall should be more than 10 cm.
--Do not install the product in a place with
no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or
cushion.
--Make sure the air vent is not blocked by
a tablecloth or curtain.
Otherwise, this may result in fire.
yyDo not mix new batteries with old
batteries. This may cause the batteries to
overheat and leak.
yyBatteries should not be exposed to
excessive heat. For example, keep away
from direct Sunlight, open fireplace and
electric heaters.
Safety Instructions
yyPeriodically examine the cord of your
appliance, and if its appearance indicates
damage or deterioration, unplug it,
discontinue use of the appliance, and
have the cord replaced with an exact
replacement part by an authorized
servicer.
yyPrevent dust collecting on the power plug
pins or outlet.
This may cause a fire hazard.
yyProtect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or
walked upon. Pay particular attention to
plugs, wall outlets, and the point where
the cord exits the appliance.
yyDo not press strongly upon the panel
with a hand or sharp object such as nail,
pencil or pen, or make a scratch on it, as
it may cause damage to screen.
yyAvoid touching the screen or holding
your finger(s) against it for long periods
of time. Doing so may produce some
temporary or permanent distortion/
damage to screen.
yyWhen cleaning the product and its
components, unplug the power first
and wipe it with a soft cloth. Applying
excessive force may cause scratches or
discolouration. Do not spray with water
or wipe with a wet cloth. Never use glass
cleaner, car or industrial shiner, abrasives
or wax, benzene, alcohol etc., which can
damage the product and its panel.
Otherwise, this may result in fire, electric
shock or product damage (deformation,
corrosion or breakage).
yyAs long as this unit is connected to the
AC wall outlet, it is not disconnected from
the AC power source even if you turn off
this unit by SWITCH.
yyWhen unplugging the cable, grab the
plug and unplug it, by pulling at the plug.
Don’t pull at the cord to unplug the power
cord from the power board, as this could
be hazardous.
yyWhen moving the product, make sure
you turn the power off first. Then, unplug
the power cables, antenna cables and all
connecting cables.
The TV set or power cord may be
damaged, which may create a fire hazard
or cause electric shock.
yyWhen moving or unpacking the product,
work in pairs because the product is
heavy.
Otherwise, this may result in injury.
ENGLISH
ENG
yyTake care not to touch the ventilation
openings when watching the TV for long
periods as the ventilation openings may
become hot. This does not affect the
operation or performance of the product.
7
8
Safety Instructions
ENGLISH
ENG
yyContact the service centre once a year to
clean the internal parts of the product.
Accumulated dust can cause mechanical
failure.
yyRefer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as power supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus,
the apparatus has been exposed to rain
or moisture, does not operate normally,
or has been dropped.
yyIf the product feels cold to the touch,
there may be a small “flicker” when it is
turned on. This is normal, there is nothing
wrong with product.
yyThe panel is a high technology display
product with resolution of two million
to six million pixels. You may see tiny
black dots and/or brightly coloured dots
(red, blue or green) at a size of 1 ppm
on the panel. This does not indicate
a malfunction and does not affect the
performance and reliability of the product.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
yyYou may find different brightness and
colour of the panel depending on your
viewing position(left/right/top/down).
This phenomenon occurs due to the
characteristic of the panel. It is not related
with the product performance, and it is
not malfunction.
yyDisplaying a still image (e.g.,
broadcasting channel logo, on-screen
menu, scene from a video game) for a
prolonged time may cause damage to
the screen, resulting in retention of the
image, which is known as image sticking.
The warranty does not cover the product
for image sticking.
Avoid displaying a fixed image on your
television’s screen for a prolonged period
(2 or more hours for LCD, 1 or more
hours for Plasma).
Also, if you watch the TV at a ratio of 4:3
for a long time, image sticking may occur
on the borders of the panel.
This phenomenon also occurs in thirdparty products and is not subject to
exchange or refund.
yyGenerated Sound
“Cracking” noise: A cracking noise that
occurs when watching or turning off
the TV is generated by plastic thermal
contraction due to tempera-ture and
humidity. This noise is common for
products where thermal deformation is
required. Electrical circuit humming/panel
buzzing: A low level noise is generated
from a high-speed switching circuit, which
supplies a large amount of current to
operate a product. It varies depend-ing
on the product.
This generated sound does not affect the
performance and reliability of the product.
Safety Instructions
WARNING
Viewing Environment
yy Viewing Time
-- When watching 3D contents, take 5 - 15
minute breaks every hour. Viewing 3D
contents for a long period of time may
cause headache, dizziness, fatigue or
eye strain.
Those that have a photosensitive seizure or
chronic illness
yy Some users may experience a seizure or
other abnormal symptoms when they are
exposed to a flashing light or particular
pattern from 3D contents.
yy Do not watch 3D videos if you feel nausea,
are pregnant and/ or have a chronic illness
such as epilepsy, cardiac disorder, or blood
pressure disease, etc.
yy 3D Contents are not recommended to those
who suffer from stereo blindness or stereo
anomaly. Double images or discomfort in
viewing may be experienced.
yy If you have strabismus (cross-eyed),
amblyopia (weak eyesight) or astigmatism,
you may have trouble sensing depth and
easily feel fatigue due to double images. It
is advised to take frequent breaks than the
average adult.
yy If your eyesight varies between your right
and left eye, revise your eyesight prior to
watching 3D contents.
Symptoms which require discontinuation or
refraining from watching 3D contents
yy Do not watch 3D contents when you feel
fatigue from lack of sleep, overwork or
drinking.
yy When these symptoms are experienced,
stop using/watching 3D contents and get
enough rest until the symptom subsides.
-- Consult your doctor when the symptoms
persist. Symptoms may include
headache, eyeball pain, dizziness,
nausea, palpitation, blurriness,
discomfort, double image, visual
inconvenience or fatigue.
CAUTION
Viewing Environment
� Viewing Distance
- Maintain a distance of at least twice the
screen diagonal length when watching
3D contents. If you feel discomfort in
viewing 3D contents, move further away
from the TV.
Viewing Age
yy Infants/Children
-- Usage/ Viewing 3D contents for children
under the age of 5 are prohibited.
-- Children under the age of 10 may
overreact and become overly excited
because their vision is in development
(for example: trying to touch the
screen or trying to jump into it. Special
monitoring and extra attention is
required for children watching 3D
contents.
-- Children have greater binocular
disparity of 3D presentations than adults
because the distance between the eyes
is shorter than one of adults. Therefore
they will perceive more stereoscopic
depth compared to adults for the same
3D image.
yy Teenagers
-- Teenagers under the age of 19 may
react with sensitivity due to stimulation
from light in 3D contents. Advise them
to refrain from watching 3D contens for
a long time when they are tired.
yy Elderly
-- The elderly may perceive less 3D
effect compared to the youth. Do not sit
closer to the TV than the recommended
distance.
Cautions when using the 3D glasses
� Make sure to use LG 3D glasses. Otherwise,
you may not be able to view 3D videos
properly.
� Do not use 3D glasses instead of your
normal glasses, sunglasses or protective
goggles.
� Using modified 3D glasses may cause eye
strain or image distortion.
� Do not keep your 3D glasses in extremely
high or low temperatures. It will cause
deformation.
� The 3D glasses are fragile and are easy
to be scratched. Always use a soft, clean
piece of cloth when wiping the lenses. Do
not scratch the lenses of the 3D glasses
with sharp objects or clean/wipe them with
chemicals.
ENGLISH
ENG
Viewing 3D Imaging
(Only 3D models)
9
10
ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you
are using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the
TV should be turned off if it will not be watched for some time, as this will reduce energy
consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the
picture is reduced, and this will reduce the overall running cost.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s
warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to
upgrade of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm
thick and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB
memory stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
11
ENGLISH
ENG
Remote control,
batteries (AAA)
Owner’s manual
Cable Holder
1EA
Power Cord
Stand Screws
4EA, M4 x L14
(Only 39/42/47/50/
55/60LB56**,
42/49/55LB55**,
42/49/55LB62**)
Stand Screws
4EA, M4 x L20
(Only 32LB56**, 32LB55**,
32LB62**)
Cable Managements
2EA
Wall mount spacers
2EA
(Only 42LB56**, 42LB55**,
42LB62**)
Stand Bases
(Only LB56**, LB55**,
LB62**-TA)
Stand Bases
(Only LB62**-TF/TE)
Cinema 3D Glasses
The number of 3D glasses
may differ depending on the
model or country.
(Only LB62**)
ocal
al
m
B
12
ASSEMBLING AND PREPARING
ENGLISH
ENG
Separate purchase
Separate purchase items can be changed or modified for quality improvement without any notification.
Contact your dealer to buy these items. These devices only work with certain models. The model
name or design may be changed depending on the upgrade of product functions, manufacturer’s
circumstances or policies.
AG-F***
Cinema 3D glasses
Compatibility
AG-F***DP
Dual play glasses
LB62**
AG-F***
Cinema 3D glasses
•
AG-F***DP
Dual play glasses
•
LG Audio Device
•
LG Audio Device
LB56**
•
(Except for 32LB56*B,
32LB56*D, 32LB56*Z)
LB55**
•
(Except for 32LB55*B,
32LB55*D, 32LB55*R,
32LB55*Z)
ASSEMBLING AND PREPARING
ENGLISH
ENG
Parts and buttons
13
(Only LB56**, LB55**, LB62**-TA)
Screen
Joystick button
( *This button is located below the TV
screen.)
Speakers
Remote control sensor
Power Indicator
(Only LB62**-TF/TE)
Screen
Joystick button
( *This button is located below the TV
screen.)
Speakers
Remote control sensor
Power Indicator
NOTE
yy You can set the power indicator light to on or off by selecting OPTION in the main menus.
14
ASSEMBLING AND PREPARING
ENGLISH
ENG
Using the Joystick button
You can simply operate the TV functions, by pressing to turn ON/OFF or sliding your finger over
joystick button moving up, down, left or right.
Basic Functions
Power On
When the TV is turned off, place your finger on the joystick
button and press it once and release it.
Power Off
When the TV is turned on, place your finger on the joystick
button and press it once for a few seconds and release it.
(However, if the Menu button is on the screen, pressing and
holding the joystick button will let you exit the Menu.)
Volume
Control
If you place your finger over the joystick button and move it left
or right, you can adjust the volume level you want.
Programmes
Control
If you place your finger over the joystick button and move it up
or down, you can scrolls through the saved programmes you
want.
NOTE
yy When your finger is over the joystick button and you are sliding finger forward/back ,left or right,
be careful not to press down to hard on joystick . If you press down hard on joystick button first
then the adjustment of Volume level and programme scroll action will not operate.
Adjusting the Menu
When the TV is turned on, press the joystick button one time.
You can adjust the Menu items (
) moving the joystick button up, down, left or right.
TV Off
Turns the power off.
Settings
Accesses the main menu.
Close
Clears on-screen displays and returns to TV viewing.
Input List Changes the input source.
ASSEMBLING AND PREPARING
Please note the following advice to prevent the
TV from being scratched or damaged and for
safe transportation regardless of its type and
size.
yy When transporting a large TV, there should
be at least 2 people.
yy When transporting the TV by hand, hold the
TV as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the
box or packing material that the TV originally
came in.
yy Before moving or lifting the TV, disconnect
the power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame
firmly. Make sure not to hold the transparent
part, speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV
upright, never turn the TV on its side or tilt
towards the left or right.
yy Do not apply excessive pressure to cause
flexing /bending of frame chassis as it may
damage screen.
ENGLISH
ENG
Lifting and moving the TV
15
16
ASSEMBLING AND PREPARING
ENGLISH
ENG
Setting up the TV
(Only LB62**-TF/TE)
Image shown may differ from your TV.
1
A stand base
Attaching the stand
(Only LB56**, LB55**, LB62**-TA)
1
B stand base
A stand base
1
B stand base
2
1
2
2
M4 x L14
2
M4 x L20
(Only
4EA 32LB62**-TF/
TE)
M4 x L14
M4 x L20
(Only 32LB56**,
4EA 32LB55**,
32LB62**-TA)
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect
the screen from scratches.
ASSEMBLING AND PREPARING
Securing the TV to a wall
1 Lift and tilt the TV into its upright position on
a table.
-- Leave a 10 cm (minimum) space from
the wall for proper ventilation.
(This feature is not available for all models.)
10 cm
10 cm
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
WARNING
yy If a television is not positioned in a
sufficiently stable location, it can be
potentially hazardous due to falling. Many
injuries, particularly to children, can be
avoided by taking simple precautions
such as:
»» Using cabinets or stands
recommended by the manufacturer
of the television.
»» Only using furniture that can safely
support the television.
»» Ensuring the television is not
overhanging the edge of the
supporting furniture.
»» Not placing the television on tall
furniture (for example, cupboards or
bookcases) without anchoring both
the furniture and the television to a
suitable support.
»» Not standing the televisions on cloth
or other materials placed between
the television and supporting
furniture.
»» Educating children about the dangers
of climbing on furniture to reach the
television or its controls.
1 Insert and tighten the eye-bolts, or TV
brackets and bolts on the back of the TV.
-- If there are bolts inserted at the eyebolts position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets
tightly with a sturdy rope.
Make sure to keep the rope horizontal with
the flat surface.
CAUTION
yy Make sure that children do not climb on
or hang on the TV.
NOTE
yy Use a platform or cabinet that is strong
and large enough to support the TV
securely.
yy Brackets, bolts and ropes are not
provided. You can obtain additional
accessories from your local dealer.
ENGLISH
ENG
Mounting on a table
17
18
ASSEMBLING AND PREPARING
ENGLISH
ENG
Mounting on a wall
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be
performed by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount
bracket that meet the VESA standard. Standard
dimensions for the wall mount kits are described
in the following table.
Separate purchase(Wall Mounting Bracket)
Model
VESA (A x B)
Standard
screw
Number of
screws
Wall mount
bracket
Model
VESA (A x B)
Standard
screw
Number of
screws
Wall mount
bracket
32/39LB56** 42/47/50/55LB56**
32LB55**
42/49/55LB55**
32LB62**
42/49/55LB62**
200 x 200
400 x 400
M6
M6
4
4
LSW240B
MSW240
60LB56**
400 x 400
LSW440B
MSW240
CAUTION
yy Disconnect the power first, and then
move or install the TV. Otherwise electric
shock may occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
yy Do not over tighten the screws as this
may cause damage to the TV and void
your warranty.
yy Use the screws and wall mounts that
meet the VESA standard. Any damages
or injuries by misuse or using an
improper accessory are not covered by
the manufacturer’s warranty.
NOTE
y y Use the screws that are listed on the
VESA standard screw specifications.
y y The wall mount kit includes an installation
manual and necessary parts.
y y The wall mount bracket is not provided.
You can obtain additional accessories
from your local dealer.
y y The length of screws may differ
depending on the wall mount. Make sure
to use the proper length.
y y For more information, refer to the manual
supplied with the wall mount.
y y When attaching a wall mounting bracket
to the TV, insert the wall mount spacers
into the TV wall mount holes to adjust the
vertical angle of the TV.
(Only 42LB56**, 42LB55**, 42LB62**)
M6
Wall Mount
Spacers
4
LSW440B
A
B
MAKING CONNECTIONS
This section on MAKING CONNECTIONS
mainly uses diagrams for the LB5600 models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with
each device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB
storage devices, PC, gaming devices, and other
external devices.
Antenna Connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
ANTENNA/
CABLE IN
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV programme on a
DVD recorder or VCR, make sure to
connect the TV signal input cable to the
TV through a DVD recorder or VCR. For
more information of recording, refer to
the manual provided with the connected
device.
yy Refer to the external equipment’s manual
for operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
yy In PC mode, there may be noise
associated with the resolution, vertical
pattern, contrast or brightness. If noise is
present, change the PC output to another
resolution, change the refresh rate to
another rate or adjust the brightness and
contrast on the PICTURE menu until the
picture is clear.
yy In PC mode, some resolution settings
may not work properly depending on the
graphics card.
(*Not Provided)
NOTE
yy Use a signal splitter to use more than 2
TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an
antenna connected, try to realign the
antenna in the correct direction.
yy An antenna cable and converter are not
supplied.
yy Supported DTV Audio: MPEG, Dolby
Digital, Dolby Digital Plus, HE-AAC
ENGLISH
ENG
MAKING CONNECTIONS
19
20
MAKING CONNECTIONS
Connect your TV to external devices. For the best picture and audio quality, connect the external
device and the TV with the HDMI cable as shown. Some separate cable is not provided.
IN
1
ANTENNA/
CABLE IN
OPTICAL
DIGITAL
AUDIO OUT
RED
WHITE
RED
YELLOW
RED
BLUE
RED
BLUE
GREEN
WHITE
GREEN
(Except for 32LB56*B,
32LB56*D, 32LB55*B,
32LB55*D, 32LB55*R,
32LB56*Z, 32LB55*Z)
HDMI
RED
WHITE
VIDEO
YELLOW
L
RED
WHITE
DVD / Blu-Ray / HD Cable
Box / HD STB / PC
R
AUDIO
VIDEO
L (MONO) AUDIO R
OPTICAL AUDIO IN
USB IN
HDD IN
DVD / Blu-Ray / HD
Cable Box
IN
Digital Audio
System
)
ENGLISH
ENG
Other Connections
DVD / Blu-Ray / HD Cable
Box / VCR
VIDEO
VIDEO
AUDIO
L (MONO) AUDIO R
OPTICAL AUDIO IN
MAKING CONNECTIONS
21
USB IN
HDD IN
ENGLISH
ENG
2 (MHL)
IN
USB / HDD
Mobile phone
H/P OUT
MHL passive cable
Headphone
22
REMOTE CONTROL
ENGLISH
ENG
REMOTE CONTROL
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly. To replace batteries, open
the battery cover, replace batteries (1.5 V AAA) matching the
and
ends to the
label inside the compartment, and close the battery cover. To remove the batteries,
perform the installation actions in reverse.
CAUTION
yyDo not mix old and new batteries, as this may damage the remote control.
yyIn Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
(Only LB56**, LB55**) (Except for India)
TV/
RAD
RATIO
SUBTITLE
1
4
7
LIST
INPUT
AV MODE
2
5
8
0
3
6
9
Q.VIEW
FAV
GUIDE
P
MUTE
TEXT
INFO
SETTINGS
T.OPT
Q.MENU
EXIT
LIVE TV
AD /
REC
(POWER) Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
RATIO Resizes an image.
AV MODE Selects an AV mode.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
GUIDE Shows programme guide.
MUTE
Mutes all sounds.
Adjusts the volume level.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
Teletext buttons (
TEXT, T.OPT) These buttons are used for
teletext.
INFO Views the information of the current programme and screen.
SETTINGS Accesses the main menus.
Q.MENU Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
AD/ By Pressing AD button, audio descriptions function will be
enabled. (Depending on model)
REC Starts to record and displays record menu.
(Only Time Machine supported model)
LIVE TV Returns to LIVE TV.
) Controls the MY MEDIA menus,
Control buttons (
Time Machine control or the SIMPLINK compatible devices (USB,
SIMPLINK or Time Machine).
Coloured buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue )
(
REMOTE CONTROL
23
TV/
RAD
RATIO
SUBTITLE
INPUT
AV MODE
1
4
7
LIST
2
5
8
0
3
6
9
Q.VIEW
FAV
GUIDE
P
MUTE
TEXT
INFO
SETTINGS
T.OPT
Q.MENU
EXIT
LIVE TV
BOLLYWOOD
REC
(POWER) Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
AV MODE Selects an AV mode.
RATIO Resizes an image.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
GUIDE Shows programme guide.
MUTE
Mutes all sounds.
Adjusts the volume level.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
TEXT, T.OPT) These buttons are used for
Teletext buttons (
teletext.
INFO Views the information of the current programme and screen.
SETTINGS Accesses the main menus.
Q.MENU Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
BOLLYWOOD Switches the BOLLYWOOD sound mode.
REC Starts to record and displays record menu.
(Only Time Machine supported model)
LIVE TV Returns to LIVE TV.
Control buttons (
) Controls the MY MEDIA menus,
Time Machine control or the SIMPLINK compatible devices (USB,
SIMPLINK or Time Machine).
Coloured buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue )
(
ENGLISH
ENG
(Only LB56**, LB55**) (Only India)
24
REMOTE CONTROL
ENGLISH
ENG
(Only LB62**) (Except for India)
TV/
RAD
INPUT
SUBTITLE
1
4
7
LIST
GUIDE
AV MODE
2
5
8
0
3
6
9
Q.VIEW
FAV
P
MUTE
TEXT
INFO
T.OPT
3D OPTION
Q.MENU
SETTINGS
EXIT
LIVE TV
AD /
REC
(POWER) Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
GUIDE Shows programme guide.
AV MODE Selects an AV mode.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
Used for viewing 3D video.
Mutes all sounds.
MUTE
Adjusts the volume level.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
TEXT, T.OPT) These buttons are used for
Teletext buttons (
teletext.
INFO Views the information of the current programme and screen.
SETTINGS Accesses the main menus.
3D OPTION Use this to view 3D video.
Q.MENU Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
AD/ By pressing the AD button, audio descriptions function will be
enabled. (Depending on model)
REC Starts to record and displays record menu.
(Only Time Machine supported model)
LIVE TV Returns to LIVE TV.
) Controls the MY MEDIA menus,
Control buttons (
Time Machine control or the SIMPLINK compatible devices (USB,
SIMPLINK or Time Machine).
Coloured buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue )
(
REMOTE CONTROL
25
TV/
RAD
INPUT
SUBTITLE
1
4
7
LIST
GUIDE
SETTINGS
2
5
8
0
3
6
9
Q.VIEW
FAV
P
MUTE
TEXT
INFO
T.OPT
3D OPTION
Q.MENU
BOLLWOOD
EXIT
LIVE TV
AV MODE
REC
(POWER) Turns the TV on or off.
TV/RAD
Selects Radio, TV and DTV programme.
SUBTITLE Recalls your preferred subtitle in digital mode.
GUIDE Shows programme guide.
SETTINGS Accesses the main menus.
INPUT Changes the input source.
Number buttons Enters numbers.
LIST Accesses the saved programme list.
Q.VIEW Returns to the previously viewed programme.
FAV Accesses your favourite programme list.
Used for viewing 3D video.
Mutes all sounds.
MUTE
Adjusts the volume level.
ꕌPꕍ Scrolls through the saved programmes.
ꕌPAGEꕍ Moves to the previous or next screen.
TEXT, T.OPT) These buttons are used for
Teletext buttons (
teletext.
INFO Views the information of the current programme and screen.
BOLLYWOOD Switches the BOLLYWOOD sound mode.
3D OPTION Use this to view 3D video.
Q.MENU Accesses the Quick menus.
Navigation buttons (up/down/left/right) Scrolls through menus or
options.
OK Selects menus or options and confirms your input.
BACK Returns to the previous level.
EXIT Clears on-screen displays and returns to TV viewing.
AV MODE Selects an AV mode.
REC Starts to record and displays record menu.
(Only Time Machine supported model)
LIVE TV Returns to LIVE TV.
) Controls the MY MEDIA menus,
Control buttons (
Time Machine control or the SIMPLINK compatible devices (USB,
SIMPLINK or Time Machine).
Coloured buttons These access special functions in some menus.
: Red,
: Green,
: Yellow,
: Blue )
(
ENGLISH
ENG
(Only LB62**) (Only India)
26
SETTINGS
ENGLISH
ENG
SETTINGS
Automatically Setting Up Programme
SETTINGS SETUP Auto Tuning
Automatically tunes the programmes.
yy If Input Source is not connected properly,
programme registration may not work.
yy Auto Tuning only finds programmes that are
currently broadcasting.
yy If Lock System is turned on, a pop-up
window will appear asking for password.
To adjust picture with Picture Wizard
SETTINGS PICTURE Picture Wizard III
[Depending on model]
Calibrates and adjusts for optimum picture
quality using the remote control and the Picture
Wizard without expensive pattern devices or
help from a specialist.
To select Picture Mode
SETTINGS PICTURE Picture Mode
Select the picture mode optimized for the
viewing environment or the programme.
yy Vivid : Heightens contrast, brightness and
sharpness to display vivid images.
yy Standard : Displays images in standard
levels of contrast, brightness and sharpness.
yy Eco/APS : [Depending on model]
The Energy Saver feature changes settings
on the TV to reduce power consumption.
yy Cinema/Game : Displays the optimum
picture for movie, game.
yy Soccer : [Depending on model] Optimised
picture mode for football matches. The pitch
and kits are presented in vibrant colours,
with crystal-clear images even for fast
movements.
yy
Expert : Menu for adjusting picture
quality that allows experts and amateurs
to enjoy the best TV viewing. This is the
adjustment menu provided for ISF-certified
picture tuning professionals. (ISF logo can
only be used on ISF-certified TVs.)
ISFccc: Imaging Science Foundation
Certified Calibration Control
yy Depending on input signal, available range
of picture modes may differ.
Expert mode is for picture tuning
yy
professionals to control and fine-tune using
a specific image. For normal images, the
effects may not be dramatic.
yy The ISF function is only available on some
models.
To set advanced control
SETTINGS PICTURE Picture Mode
Advanced Control / Expert Control
Calibrates the screen for each picture mode; or
adjusts picture settings for a special screen. First
select a Picture Mode of your choice.
yy Dynamic Contrast : Adjusts the contrast to
the optimal level according to the brightness
of the image.
yy Dynamic Colour : Adjusts colours to make
the image appear in more natural colours.
yy Skin Colour : Sets Skin colour spectrum
separately to implement the skin colour as
defined by the user.
yy Sky Colour : Sky colour is set separately.
yy Grass Colour : Natural colour spectrum
(meadows, hills, etc.) can be separately set.
yy Gamma : Sets the gradation curve according
to the output of picture signal in relation to
the input signal.
yy Colour Gamut : Selects the range of colours
that can be expressed.
yy Edge Enhancer : Shows clearer and
distinctive yet natural edges of the video.
yy Expert Pattern : [Depending on model]
Patterns used for expert adjustment.
yy Colour Filter : Filters a specific colour
spectrum in RGB colours to fine-tune colour
saturation and hue accurately.
SETTINGS
To set additional picture options
SETTINGS PICTURE Picture Mode
Picture Option
[Depending on model]
Adjusts detailed setting for images.
yy Noise Reduction : Eliminates noise in the
picture.
yy MPEG Noise Reduction : Eliminates noise
generated while creating digital picture
signals.
yy Black Level : Adjusts the brightness and
contrast of the screen to suit the black level
of the input picture by using the blackness
(black level) of the screen.
yy Real Cinema : Optimizes the screen for
movie viewing.
yy Motion Eye Care / SUPER Energy Saving
: [Depending on model] Saves power
consumption by adjusting the brightness
corresponding to the movement of the image
on the screen.
yy Depending on input signal or other picture
settings, the range of detailed items for
adjustment may differ.
To use TruMotion
SETTINGS PICTURE TruMotion
[Depending on model]
Corrects images to display smoother motion
sequences.
yy Smooth : De-judder/De-blur working on
higher range in auto mode.
yy Clear : De-judder/De-blur working on middle
range in auto mode.
yy User : De-judder / De-blur can be set
manually.
De-judder : This function adjusts juddering of
the screen.
De-blur : This function adjusts and eliminates
blurring of the screen.
Auto means Juddering and blurring range that
depend on input video status is controlled by
TruMotion mode.
To use Energy Saving feature
SETTINGS PICTURE Energy Saving
Reduces power consumption by adjusting
screen brightness.
yy Auto : [Depending on model]
The TV sensor detects the ambient lighting
and automatically adjusts the screen
brightness.
yy Off : Turns off the Energy Saving mode.
yy Minimum / Medium / Maximum : Applies
the pre-set Energy Saving mode.
yy Screen Off : Screen is turned off and only
sound is played. Press any button except
Power button on the remote control to turn
the screen back on.
To use TV speaker
SETTINGS AUDIO Sound Out TV
Speaker
[Depending on model]
Sound is output through the TV speaker.
ENGLISH
ENG
yy Colour Temperature : Adjusts the overall
tone of the screen as desired. In Expert
mode, detailed fine-tuning can be set via
Gamma method, etc.
yy Colour Management System : This is
a system that experts use when they
adjust colour with a test pattern. They can
select from six colour areas (Red / Green
/ Blue / Cyan / Magenta / Yellow) without
affecting other colours. For normal images,
adjustments may not result in noticeable
colour changes.
yy Depending on input signal or other picture
settings, the range of detailed items for
adjustment may differ.
27
28
SETTINGS
ENGLISH
ENG
To use External Speaker
To synchronize audio and video
SETTINGS AUDIO Sound Out External
Speaker (Optical)
[Depending on model]
Sound is output through the speaker connected
to the optical port.
yy SimpLink is supported.
SETTINGS AUDIO AV Sync. Adjust
[Depending on model]
Synchronizes video and audio directly when they
do not match.
yy If you set AV Sync. Adjust to ON, you can
adjust the sound output (TV speakers or
SPDIF) to the screen image.
To use Digital Sound Out
SETTINGS AUDIO Sound Out External
Speaker (Optical) Digital Sound Out
[Depending on model]
Sets up Digital Sound Out.
Item
Audio Input
Digital Audio
Ouput
Auto
MPEG
Dolby Digital
Dolby Digital Plus
HE-AAC
PCM
Dolby Digital
Dolby Digital
Dolby Digital
PCM
All
PCM
To connect and use LG audio device
SETTINGS AUDIO Sound Out LG Sound
Sync (Optical)
[Depending on model]
logo to
Connect LG audio device with the
the optical digital audio output port. LG audio
device allows you to enjoy rich powerful sound
easily.
To use Headphone
SETTINGS AUDIO Sound Out
Headphone
[Depending on model]
Sound is output through the headphone
connected to the earphone/headphone port.
To use SIMPLINK
[Depending on model]
SIMPLINK is a feature that enables you to
control and manage various multimedia devices
conveniently via the SIMPLINK menu.
1 Connect the TV’s HDMI IN terminal and the
SIMPLINK device’s HDMI output terminal
using an HDMI cable.
yy [Depending on model]
For home theatre units with a SIMPLINK
function, connect HDMI terminals as above,
and use an optical cable to connect Optical
Digital Audio Out from the TV to Optical
Digital Audio In of the SIMPLINK device.
2 Select INPUT(OPTION)  SIMPLINK.
SIMPLINK menu window appears.
3 In SIMPLINK Setting window, set SIMPLINK
function to ON.
4 In SIMPLINK menu window, selects the
device you want to control.
yy This function is only compatible with devices
with the SIMPLINK logo.
yy To use the SIMPLINK function, you need to
use a high-speed HDMI® cable (with CEC
(Consumer Electronics Control) feature
added). High-speed HDMI® cables have
the No. 13 pin connected for information
exchange between devices.
yy If you switch to another input, the SIMPLINK
device will stop.
SETTINGS
SIMPLINK function description
yy Direct Play : Plays the multimedia device on
the TV instantly.
yy Select multimedia device : Selects the
desired device via the SIMPLINK menu to
control it from the TV screen instantly.
yy Disc playback : Manages the multimedia
device with the TV remote control.
yy Power off all devices : When you power off
the TV, all connected devices are turned off.
yy Sync Power on : When the equipment with
SIMPLINK function connected HDMI terminal
starts to play, the TV will automatically turn
on.
yy Speaker : [Depending on model]
Select speaker either on the home theatre
unit or the TV.
To set password
SETTINGS LOCK Set Password
Sets or changes the TV password.
The initial password is set to ‘0000’.
To return Factory Reset
SETTINGS  OPTION Factory Reset
All stored information is deleted and TV settings
are reset.
The TV turns itself off and back on, and all
settings are reset.
yy When Lock System is in place, a pop-up
window appears and asks for password
yy Do not turn off the power during initialization.
To remove the USB device
Q.MENU USB Device
Select a USB storage device that you want to
remove.
When you see a message that the USB device
has been removed, separate the device from the
TV.
yy Once a USB device has been selected for
removal, it can no longer be read. Remove
the USB storage device and then re-connect
it.
Using a USB storage device - warning
yy If the USB storage device has a built-in auto
recognition program or uses its own driver, it
may not work.
yy Some USB storage devices may not work or
may work incorrectly.
yy Use only USB storage devices formatted
with the Windows FAT32 or NTFS File
System.
yy For external USB HDDs, it is recommended
that you use devices with a rated voltage of
less than 5 V and a rated current of less than
500 mA.
yy It is recommended that you use USB
memory sticks of 32 GB or less and USB
HDDs of 1 TB or less.
yy If a USB HDD with power-saving function
does not work properly, turn the power off
and on. For more information, refer to the
user manual of the USB HDD.
yy Data in the USB storage device can be
damaged, so be sure to back up important
files to other devices. Data maintenance
is the user’s responsibility and the
manufacturer is not responsible for data
loss.
ENGLISH
ENG
yy If a third-party device with the HDMI-CEC
function is also used, the SIMPLINK device
may not work normally.
yy [Depending on model]
If you select or play media from a the
device with a home theatre function, the
HT Speaker(Speaker) is automatically
connected.
Be sure to connect with an optical cable (sold
separately) to use the HT Speaker(Speaker)
function.
29
30
SETTINGS
ENGLISH
ENG
My Media supporting file
yy Maximum data transfer rate : 20 Mbps (Mega
bit per second)
yy External supported subtitle formats
: *.srt (SubRip), *.smi (SAMI), *.sub
(SubViewer, MicroDVD, DVDsubtitleSystem,
SubIdx(Vobsub)), *.ass/*.ssa (SubStation
Alpha), *.txt (TMplayer), *.psb (PowerDivX)
yy Internal supported subtitle formats: XSUB
(Supports internal subtitles generated from
DivX6)
Supported Video Formats
yy Maximum: 1920 x 1080 @ 30p (only Motion
JPEG 640 x 480 @ 30p)
yy .asf, .wmv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC,
VC1(WMV3, WVC1), MP43
[Audio] WMA Standard, WMA9(Pro), MP3,
AAC, AC3, MP3, 3D WMV Single Stream
yy .divx, .avi
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XViD, H.264/AVC
[Audio] HE-AAC, LPCM, ADPCM, MPEG1 Layer I, MPEG-1 Layer II, Dolby Digital,
MPEG-1 Layer III (MP3), *DTS
yy .ts, .trp, .tp, .mts, .m2ts
[Video] H.264/AVC, MPEG-2, AVS, VC1
[Audio] MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3), Dolby Digital,
Dolby Digital Plus, AAC, HE-AAC, *DTS
yy .vob
[Video] MPEG-1, MPEG-2
[Audio] Dolby Digital, MPEG-1 Layer I,
MPEG- 1 Layer II, DVD-LPCM
yy .mp4, .m4v, .mov
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC
[Audio] AAC, MPEG-1 Layer III (MP3), *DTS
yy .mkv
[Video] MPEG-2, MPEG-4 Part2, DivX3.11,
DivX4, DivX5, DivX6, XVID, H.264/AVC
[Audio] HE-AAC, Dolby Digital, MPEG-1
Layer III (MP3), *DTS, LPCM
yy motion JPEG
[Video] MJPEG
[Audio] LPCM, ADPCM
yy .mpg, .mpeg, .mpe
[Video] MPEG-1, MPEG-2
[Audio] MPEG-1 Layer I, MPEG-1 Layer II,
Dolby Digital, LPCM
yy dat
[Video] MPEG-1, MPEG-2
[Audio] MP2
yy flv
[Video] Sorenson H.263, H.264/AVC
[Audio] MP3, AAC, HE-AAC
yy *rm, *rmvb
[Video] RV30, RV40
[Audio] Dolby Digital, AAC, HE-AAC,
RA6(Cook)
yy 3gp, 3gp2
[Video] H.264/AVC, MPEG-4 Part2
[Audio] AAC, AMR(NB/WB)
*DTS / *rm / *rmvb : Depending on model
Supported Audio Formats
yy File type : mp3
[Bit rate] 32 Kbps - 320 Kbps
[Sample freq.] 16 kHz - 48 kHz
[Support] MPEG1, MPEG2, Layer2, Layer3
yy File Type : AAC
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] ADIF, ADTS
yy File Type : M4A
[Bit rate] Free Format
[Sample freq.] 8 kHz ~ 48 kHz
[Support] MPEG-4
yy File Type : WMA
[Bit rate] 128 Kbps ~ 320 Kbps
[Sample freq.] 8 kHz ~ 48 kHz
[Support] WMA7, WMA8, WMA9 Standard
yy File Type : WMA
[Bit rate] ~ 768 Kbps
[Channel / Sample freq.]
M0 : up to 2 Channel @ 48 kHz
(Except LBR mode),
M1 : up to 5.1 Channel @ 48 kHz,
M2 : up to 5.1 Channel @ 96 kHz
[Support] WMA 10 Pro
yy File Type : OGG
[Bit rate] Free Format
[Sample freq.] ~ 48 kHz
[Support] OGG Vorvis
SETTINGS / To see web manual / EXTERNAl CONTROL DEVICE SETUP
yy Category : 2D (jpeg, jpg, jpe)
[Available file type] SOF0: Baseline,
SOF1 : Extend Sequential,
SOF2 : Progressive
[Photo size] Minimum : 64 x 64,
Maximum : Normal Type: 15360 (W) x 8640
(H), Progressive Type : 1920 (W) x 1440 (H)
yy Category : BMP
[Photo size] Minimum : 64 x 64, Maximum :
9600 x 6400
yy Category : PNG
[Available file type] Interlace, Non-Interlace
[Photo size] Minimum : 64 x 64, Maximum :
Interlace : 1200 x 800, Non-Interlace : 9600
x 6400
yy BMP and PNG format files may be slower to
display than JPEG.
To seE web manual
To obtain detailed User Guide information,
please visit www.lg.com.
External control
device setup
To obtain the external control device setup information, please visit www.lg.com.
ENGLISH
ENG
Supported Photo Formats
31
32
MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the
wall outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may
result in scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock,
or malfunction.
Power cord
Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the TV
with the remote control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the
remote control.
yy Check if the batteries are still working and properly installed
to ,
to ).
(
No image display and
no sound is produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting
other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be
interrupted.
yy Check if the Sleep Timer or Off Time feature is activated in
the TIME settings.
yy If there is no signal while the TV is on, the TV will turn off
automatically after 15 minutes of inactivity.
When connecting to the
PC (HDMI), ‘No signal’
or ‘Invalid Format’ is
displayed.
yy Turn the TV off/on using the remote control.
yy Reconnect the HDMI cable.
yy Restart the PC with the TV on.
ENVIRONMENTAL INFORMATION
33
(Only India)
WEEE
Disposal of your old appliance
1. When this crossed-out wheeled bin symbol is attached to a product it means the
product is covered by the e-waste (Management and Handling) Rules, 2011.
2. All electrical and electronic products should be disposed of separately from
the municipal waste stream via designated collection facilities appointed by the
government or the local authorities.
3. The correct disposal of your old appliance will help prevent potential negative
consequences for the environment and human health.
4. For more detailed information about disposal of your old appliance, please contact your city office,
waste disposal service or the shop where you purchased the product.
5. This product does not contain any of the hazardous substances as specified in the rule 13 (1) and (2)
of the e-waste (Management and Handling) Rules, 2011.
ENGLISH
ENG
Environmental Information
34
SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
32LB56**
39LB56**
42LB56**
32LB5600-TA
32LB560T-TA
32LB560B-TA
32LB560D-TA
32LB560Y-TA
32LB560Z-TA
32LB565B-TA
32LB5610-TC
32LB561T-TC
32LB561B-TC
32LB561D-TC
32LB5630-TD
32LB563T-TD
32LB563B-TD
32LB563D-TD
32LB561Y-TC
32LB561Z-TC
32LB563Y-TD
32LB563Z-TD
32LB5650-TO
39LB5600-TA
39LB560T-TA
39LB560B-TA
39LB560D-TA
39LB560Y-TA
39LB560Z-TA
39LB565B-TA
39LB5610-TC
39LB561T-TC
39LB561B-TC
39LB561D-TC
39LB5630-TD
39LB563T-TD
39LB563B-TD
39LB563D-TD
39LB561Y-TC
39LB561Z-TC
39LB563Y-TD
39LB563Z-TD
39LB5650-TO
42LB5600-TA
42LB560T-TA
42LB560B-TA
42LB560D-TA
42LB560Y-TA
42LB560Z-TA
42LB565B-TA
42LB5610-TC
42LB561T-TC
42LB561B-TC
42LB561D-TC
42LB5630-TD
42LB563T-TD
42LB563B-TD
42LB563D-TD
42LB561Y-TC
42LB561Z-TC
42LB563Y-TD
42LB563Z-TD
42LB5650-TO
732 x 481 x 207
885 x 567 x 218
961 x 610 x 218
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm) 732 x 431 x 55.5
885 x 524 x 55.5
961 x 567 x 55.5
Weight
With stand (kg)
6.2
8.3
9.5
Without stand (kg)
6.0
8
9.2
Power requirement
MODELS
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
47LB56**
50LB56**
55LB56**
47LB5600-TA
47LB560T-TA
47LB560B-TA
47LB560D-TA
47LB560Y-TA
47LB560Z-TA
47LB565B-TA
47LB5610-TC
47LB561T-TC
47LB561B-TC
47LB561D-TC
47LB5630-TD
47LB563T-TD
47LB563B-TD
47LB563D-TD
47LB561Y-TC
47LB561Z-TC
47LB563Y-TD
47LB563Z-TD
47LB5650-TO
50LB5600-TA
50LB560T-TA
50LB560B-TA
50LB560D-TA
50LB560Y-TA
50LB560Z-TA
50LB565B-TA
50LB5610-TC
50LB561T-TC
50LB561B-TC
50LB561D-TC
50LB5630-TD
50LB563T-TD
50LB563B-TD
50LB563D-TD
50LB561Y-TC
50LB561Z-TC
50LB563Y-TD
50LB563Z-TD
50LB5650-TO
55LB5600-TA
55LB560T-TA
55LB560B-TA
55LB560D-TA
55LB560Y-TA
55LB560Z-TA
55LB565B-TA
55LB5610-TC
55LB561T-TC
55LB561B-TC
55LB561D-TC
55LB5630-TD
55LB563T-TD
55LB563B-TD
55LB563D-TD
55LB561Y-TC
55LB561Z-TC
55LB563Y-TD
55LB563Z-TD
55LB5650-TO
Dimensions
(W x H x D)
With stand (mm)
1073 x 676 x 255
1128 x 708 x 255
1243 x 772 x 255
Without stand(mm) 1073 x 629 x 55.8
1128 x 660 x 55.8
1243 x 725 x 56.8
Weight
With stand (kg)
12.7
14.2
18.4
Without stand (kg)
12.3
13.8
18
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
SPECIFICATIONS
32LB55**
42LB55**
60LB5600-TA
60LB560T-TA
60LB560B-TA
60LB560D-TA
60LB560Y-TA
60LB560Z-TA
60LB565B-TA
60LB5610-TC
60LB561T-TC
60LB561B-TC
60LB561D-TC
60LB5630-TD
60LB563T-TD
60LB563B-TD
60LB563D-TD
60LB561Y-TC
60LB561Z-TC
60LB563Y-TD
60LB563Z-TD
60LB5650-TO
32LB5500-TA
32LB550Z-TA
32LB550D-TA
32LB550B-TA
32LB550T-TA
32LB550Y-TA
32LB5510-TC
32LB551T-TC
32LB551B-TC
32LB551D-TC
32LB552R-TB
32LB552R-TC
32LB551Y-TC
32LB551Z-TC
42LB5500-TA
42LB550Z-TA
42LB550D-TA
42LB550B-TA
42LB550T-TA
42LB550Y-TA
42LB5510-TC
42LB551T-TC
42LB551B-TC
42LB551D-TC
42LB552R-TB
42LB552R-TC
42LB551Y-TC
42LB551Z-TC
Dimensions
(W x H x D)
With stand (mm)
1373 x 848 x 280
731 x 480 x 208
959 x 611 x 218
Without stand(mm) 1373 x 801 x 58.8
731 x 437 x 56.5
959 x 570 x 56.2
Weight
With stand (kg)
23.5
5.9
9.5
Without stand (kg)
23.0
5.7
9.2
Power requirement
MODELS
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
49LB55**
55LB55**
49LB5500-TA
49LB550Z-TA
49LB550D-TA
49LB550B-TA
49LB550T-TA
49LB550Y-TA
49LB5510-TC
49LB551T-TC
49LB551B-TC
49LB551D-TC
49LB552R-TB
49LB552R-TC
49LB551Y-TC
49LB551Z-TC
55LB5500-TA
55LB550Z-TA
55LB550D-TA
55LB550B-TA
55LB550T-TA
55LB550Y-TA
55LB5510-TC
55LB551T-TC
55LB551B-TC
55LB551D-TC
55LB552R-TB
55LB552R-TC
55LB551Y-TC
55LB551Z-TC
Dimensions
(W x H x D)
With stand (mm)
1105 x 694 x 247
1241 x 769 x 247
Without stand(mm) 1105 x 652 x 56.5
1241 x 724 x 57.5
Weight
With stand (kg)
13.6
18.2
Without stand (kg)
13.2
17.8
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
ENGLISH
ENG
MODELS
60LB56**
35
36
SPECIFICATIONS
ENGLISH
ENG
32LB62**
MODELS
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm)
Weight
With stand (kg)
Without stand (kg)
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm)
Weight
With stand (kg)
Without stand (kg)
Power requirement
MODELS
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm)
Weight
With stand (kg)
Without stand (kg)
Power requirement
32LB6200-TA
32LB620D-TA
32LB620B-TA
32LB620Z-TA
32LB620T-TA
32LB620Y-TA
731 x 480 x 208
731 x 437 x 56.5
5.9
5.7
AC 100-240 V~ 50 / 60 Hz
42LB6200-TA
42LB620D-TA
42LB620B-TA
42LB620Z-TA
42LB620T-TA
42LB620Y-TA
959 x 611 x 218
959 x 570 x 56.2
9.5
9.2
AC 100-240 V~ 50 / 60 Hz
32LB6230-TE
32LB623T-TE
32LB623B-TE
32LB623D-TE
32LB623Y-TE
32LB623Z-TE
32LB623Y-TF
32LB623Z-TF
32LB6230-TF
32LB623T-TF
32LB623B-TF
32LB623D-TF
731 x 477.6 x 184.6
731 x 437 x 56.5
5.9
5.7
AC 100-240 V~ 50 / 60 Hz
42LB62**
42LB6230-TE
42LB623T-TE
42LB623B-TE
42LB623D-TE
42LB623Y-TE
42LB623Z-TE
42LB623Y-TF
42LB623Z-TF
42LB6230-TF
42LB623T-TF
42LB623B-TF
42LB623D-TF
959 x 609.7 x 193
959 x 570 x 56.2
9.5
9.2
AC 100-240 V~ 50 / 60 Hz
49LB62**
49LB6200-TA
49LB620D-TA
49LB620B-TA
49LB620Z-TA
49LB620T-TA
49LB620Y-TA
49LB6230-TE
49LB623T-TE
49LB623B-TE
49LB623D-TE
49LB623Y-TE
49LB623Z-TE
49LB623Y-TF
49LB623Z-TF
49LB6230-TF
49LB623T-TF
49LB623B-TF
49LB623D-TF
1105 x 694 x 247
1105 x 652 x 56.5
13.6
13.2
AC 100-240 V~ 50 / 60 Hz
1105 x 694.3 x 230
1105 x 652 x 56.5
13.6
13.2
AC 100-240 V~ 50 / 60 Hz
SPECIFICATIONS
MODELS
Dimensions
(W x H x D)
With stand (mm)
Without stand(mm)
Weight
With stand (kg)
Without stand (kg)
Power requirement
Environment
condition
55LB6200-TA
55LB620D-TA
55LB620B-TA
55LB620Z-TA
55LB620T-TA
55LB620Y-TA
55LB6230-TE
55LB623T-TE
55LB623B-TE
55LB623D-TE
55LB623Y-TE
55LB623Z-TE
55LB623Y-TF
55LB623Z-TF
55LB6230-TF
55LB623T-TF
55LB623B-TF
55LB623D-TF
1241 x 769 x 247
1241 x 724 x 57.5
18.2
17.8
AC 100-240 V~ 50 / 60 Hz
1241 x 769 x 230
1241 x 724 x 57.5
18.2
17.8
AC 100-240 V~ 50 / 60 Hz
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Television System
Programme Coverage
Maximum number of
storable programmes
External Antenna Impedance
* : Only DVB-T2 support models.
Digital TV
(Depend on Country)
Analogue TV
(Depend on Country)
DVB-T (*DVB-T/T2)
PAL B/B, PAL B/G, PAL D/K, PAL-I
SECAM B/G, SECAM D/K
NTSC-M
VHF, UHF
VHF, UHF, CATV
DVB-T/T2 & Analogue TV : 1,500
75 Ω
ENGLISH
ENG
55LB62**
37
38
SPECIFICATIONS
ENGLISH
ENG
HDMI-PC supported mode
HDMI-DTV supported mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720 x 480
31.469
31.5
720 x 576
1280 x 720
Resolution
1920 x 1080
(Use HDMI IN 1 for PC mode)
Resolution
59.94
60
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
640 x 350
31.468
70.09
31.25
50
720 x 400
31.469
70.08
37.5
44.96
45
50
59.94
60
640 x 480
31.469
59.94
60.31
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Component port connecting information
Component ports on the
TV
Video output ports on
DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
Component
480i / 576i
O
480p / 576p
O
720p / 1080i
O
1080p
O
(50 Hz / 60 Hz only)
800 x 600
37.879
1024 x 768
48.363
60.00
1152 x 864
54.348
60.053
1360 x 768
47.712
60.015
1280 x 1024
63.981
60.020
1920 x 1080
67.50
60.00
(Except for 32LB56*B, 32LB56*D,
32LB55*B, 32LB55*D, 32LB55*R,
32LB56*Z, 32LB55*Z, 32LB62*B,
32LB62*D, 32LB62*Z)
SPECIFICATIONS
39
yy Video, which is input as below media contents is switched into the 3D screen automatically.
yy The method for 3D digital broadcast may differ depending on the signal environment. If video is
not switched automatically into 3D, manually convert the settings to view 3D images.
3D supported mode automatically
Input
Signal
720p
HDMI
Resolution
1280 X 720
1080i
1920 X 1080
1080p
1920 X 1080
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Playable 3D video
format
37.5
45
75
89.9 / 90
33.7
28.1
27
33.7
67.5
56.3
53.95 / 54
50
60
50
59.94 / 60
60
50
24
30
60
50
23.98 / 24
Side by Side(half),
Top and Bottom
Frame packing
Side by Side(half),
Top and Bottom
Side by Side(half),
Top and Bottom
Frame packing
3D supported mode manually
Input
Signal
Resolution
720p
1280 X 720
1080i
1920 X 1080
HDMI
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Playable 3D video
format
37.5
45
33.75
28.125
27
33.75
50
60
60
50
24
30
Side by Side,
Top and Bottom
67.5
60
1080p
1920 X 1080
56.25
50
DTV
720p
1080i
1280 X 720
1920 X 1080
37.5
28.125
50
50
USB
1080p
1920 X 1080
33.75
30
Side by Side,
Top and Bottom
Side by Side,
Top and Bottom
Side by Side,
Top and Bottom,
Single frame sequential
Side by Side, Top and
Bottom
Side by Side, Top
and Bottom
ENGLISH
ENG
3D supported mode (Only 3D model)
PT. LG ELECTRONICS INDONESIA
Kawasan Industri MM2100 Blok G
Cikarang Barat, Bekasi, Jawa Barat 17520
INDONESIA
TANDA PENDAFTARAN
PETUNJUK PENGGUNAAN (MANUAL) DAN KARTU JAMINAN/GARANSI PURNA JUAL
DALAM BAHASA INDONESIA BAGI PRODUK TELEMATIKA DAN ELEKTRONIKA
(Hanya DTV)
Catat nomor model dan nomor seri TV.
Mengacu pada label di penutup belakang dan
Informasikan pada dealer Anda apabila memerlukan
jasa pelayanan.
MODEL
SERIAL
NOMOR :
P.32.LG168.00101.0114 : 32LB5600, 39LB5650, 47LB563D, 55LB563B, 42LB550T, 32LB623B,
32LB560T, 42LB5600, 47LB5650, 55LB563D, 42LB5510, 32LB623D,
32LB560B, 42LB560T, 50LB5600, 55LB5650, 42LB551T, 42LB6200,
32LB560D, 42LB560B, 50LB560T, 60LB5600, 42LB551B, 42LB620D,
32LB565B, 42LB560D, 50LB560B, 60LB560T, 42LB551D, 42LB620B,
32LB5610, 42LB565B, 50LB560D, 60LB560B, 49LB5500, 42LB620T,
32LB561T, 42LB5610, 50LB565B, 60LB560D, 49LB550D, 42LB6230,
32LB561B, 42LB561T, 50LB5610, 60LB565B, 49LB550B, 42LB623T,
32LB561D, 42LB561B, 50LB561T, 60LB5610, 49LB550T, 42LB623B,
32LB5630, 42LB561D, 50LB561B, 60LB561T, 49LB5510, 42LB623D,
32LB563T, 42LB5630, 50LB561D, 60LB561B, 49LB551T, 49LB6200,
32LB563B, 42LB563T, 50LB5630, 60LB561D, 49LB551B, 49LB620D,
32LB563D, 42LB563B, 50LB563T, 60LB5630, 49LB551D, 49LB620B,
32LB5650, 42LB563D, 50LB563B, 60LB563T, 55LB5500, 49LB620T,
39LB5600, 42LB5650, 50LB563D, 60LB563B, 55LB550D, 49LB6230,
39LB560T, 47LB5600, 50LB5650, 60LB563D, 55LB550B, 49LB623T,
39LB560B, 47LB560T, 55LB5600, 60LB5650, 55LB550T, 49LB623B,
39LB560D, 47LB560B, 55LB560T, 32LB5500, 55LB5510, 49LB623D,
39LB565B, 47LB560D, 55LB560B, 32LB550D, 55LB551T, 55LB6200,
39LB5610, 47LB565B, 55LB560D, 32LB550B, 55LB551B, 55LB620D,
39LB561T, 47LB5610, 55LB565B, 32LB550T, 55LB551D, 55LB620B,
39LB561B, 47LB561T, 55LB5610, 32LB5510, 32LB6200, 55LB620T,
39LB561D, 47LB561B, 55LB561T, 32LB551B, 32LB620D, 55LB6230,
39LB5630, 47LB561D, 55LB561B, 32LB551D, 32LB620B, 55LB623T,
39LB563T, 47LB5630, 55LB561D, 42LB5500, 32LB620T, 55LB623B,
39LB563B, 47LB563T, 55LB5630, 42LB550D, 32LB6230, 55LB623D,
39LB563D, 47LB563B, 55LB563T, 42LB550B, 32LB623T.
Download PDF