ENGLISH
OWNER’S MANUAL
Portable Blu-ray Disc™
Player
Please read this manual carefully before operating
your set and retain it for future reference.
BP690B
P/NO : MFL67201933
BP690B-P.ASGPLLK_ENG.indd 1
6/24/11 2:20 PM
BP690B-P.ASGPLLK_ENG.indd 2
6/24/11 2:20 PM
1
Getting Started
Getting Started
3
Safety Information
CAUTION
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK) NO
USER-SERVICEABLE PARTS INSIDE REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of uninsulated dangerous
voltage within the product’s
enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature accompanying the
product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided for
ventilation and to ensure reliable operation of the
product and to protect it from over heating. The
openings shall be never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
BP690B-P.ASGPLLK_ENG.indd 3
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance,
contact an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure. Visible laser radiation when
open. DO NOT STARE INTO BEAM.
1
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION concerning the Power Cord
Most appliances recommend they be placed upon
a dedicated circuit;
That is, a single outlet circuit which powers only
that appliance and has no additional outlets or
branch circuits. Check the specification page of this
owner’s manual to be certain. Do not overload wall
outlets. Overloaded wall outlets, loose or damaged
wall outlets, extension cords, frayed power cords, or
damaged or cracked wire insulation are dangerous.
Any of these conditions could result in electric
shock or fire. Periodically examine the cord of your
appliance, and if its appearance indicates damage
or deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with an
exact replacement part by an authorized service
center. Protect the power cord from physical or
mechanical abuse, such as being twisted, kinked,
pinched, closed in a door, or walked upon. Pay
particular attention to plugs, wall outlets, and
the point where the cord exits the appliance. To
disconnect power from the mains, pull out the
mains cord plug. When installing the product,
ensure that the plug is easily accessible.
6/24/11 2:20 PM
4
Getting Started
This device is equipped with a portable battery or
accumulator.
1
Getting Started
Safety way to remove the battery or the
battery from the equipment: Remove the
old battery or battery pack, follow the steps
in reverse order than the assembly. To prevent
contamination of the environment and bring on
possible threat to human and animal health, the
old battery or the battery put it in the appropriate
container at designated collection points. Do
not dispose of batteries or battery together with
other waste. It is recommended that you use
local, free reimbursement systems batteries and
accumulators. The battery shall not be exposed to
excessive heat such as sunshine, fire or the like.
CAUTION:
yy The apparatus should not be exposed to water
(dripping or splashing) and no objects filled with
liquids, such as vases, should be placed on the
apparatus.
yy Minimum distances around the apparatus for
sufficient ventilation, no less than 5 cm.
Caution of usage in the car
yy To prevent electrical shock and possible damage
to your unit or vehicle, always unplug the
automotive adapter from the cigarette lighter
socket before you remove the plug from your
unit.
yy A 3 amp. 250 V fuse for protection is installed in
the automotive adapter.
yy While the engine is being started, disconnect
the automotive adapter from the car’s cigarette
lighter socket.
yy Do not operate your unit when the car battery is
discharged. Peak current from the car generator
may cause the DC fuse to blow.
yy If the vehicle’s supply voltage drops below
approximately 10 volts, your unit may not work
properly.
yy Do not leave your unit in a place where the
temperature exceeds 45 °C (113 °F), or the pickup device may be damaged.
yy The ventilation should not be impeded by
covering the ventilation openings with items,
such as newspapers, table-cloth, curtains etc.
yy No naked flame sources, such as lighted candles,
should be placed on the apparatus.
yy Internal lithium battery in the unit should not be
replaced by user because of danger of explosion
if battery is incorrectly replaced ,and must be
replaced with the same type battery by expert.
yy Use the apparatus in tropical and moderate climates only.
yy The excessive sound pressure from earphones
and headphones can cause hearing loss.
BP690B-P.ASGPLLK_ENG.indd 4
6/24/11 2:20 PM
Getting Started
5
Notes on Copyrights
1
Getting Started
yy Because AACS (Advanced Access Content
System) is approved as content protection
system for Blu-ray Disc format, similar to use of
CSS (Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents.
To obtain additional information on AACS, BDROM Mark, BD+, or this product, please contact
an authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi, and is intended for home and
other limited viewing uses only unless otherwise
authorized by Rovi. Reverse engineering or
disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/
or criminal liability.
BP690B-P.ASGPLLK_ENG.indd 5
6/24/11 2:20 PM
6
Table of Contents
Table of Contents
1
Getting Started
3
8
8
Safety Information
Introduction
– Playable Discs and symbols used in
this manual
– About the “7” Symbol Display
– Supplied Accessories
– File compatibility
– AVCHD (Advanced Video Codec High
Definition)
– Certain System Requirements
– Compatibility Notes
– Regional Code
Main Unit
Remote control
Using the touch sensor buttons
Revolving the LCD panel
Rechargeable battery
9
9
10
11
12
12
12
13
14
15
15
15
2 Connecting
16
16
16
16
17
18
19
19
19
20
20
20
21
23
23
Connecting the AC Adaptor
Connecting the Automotive Adaptor
Connecting to Your TV
– Connecting Audio and Video cable
– HDMI Connection
– Resolution Setting
Connecting to an Amplifier
– About Digital Multi-channel sound
– Connecting to an Amplifier via HDMI
Output
– Connecting to an Amplifier via 2
Channel Audio Output
Connecting to your Home Network
– Wired network connection
– Wired Network Setup
USB device connection
– Playback content in the USB device
BP690B-P.ASGPLLK_ENG.indd 6
3 System Setting
24
24
24
25
26
27
28
28
Settings
– Adjust the Setup Settings
– [DISPLAY] Menu
– [LANGUAGE] Menu
– [AUDIO] Menu
– [LOCK] Menu
– [NETWORK] Menu
– [OTHERS] Menu
4 Operating
30
30
30
30
31
31
32
32
32
32
33
33
33
33
34
34
35
35
35
36
36
37
37
37
38
38
38
38
39
39
39
General Playback
– Using [HOME] menu
– Playing a Disc
– Playing a file on a disc/USB device
– Enjoying BD-LiveTM
– Basic operations for video and audio
content
– Basic operations for photo content
– Using the disc menu
– Resume playback
– Last Scene Memory
Advanced Playback
– Repeat Playback
– Repeating a specific portion
– Enlarge the playback image
– Marker Search
– Using the search menu
– Changing content list view
– Viewing content information
– Selecting a subtitle file
– Options while viewing a photo
– Listening to music while slide show
On-Screen display
– Displaying content information onscreen
– Playing from selected time
– Hearing a different audio
– Selecting a subtitle language
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing the Picture Mode
– Changing subtitle code page
– Displaying MP3 music information
(ID3 Tag)
6/24/11 2:20 PM
Table of Contents
7
40 Audio CD Recording
41 Enjoying the NetCast™ Entertainment
Access
5 Troubleshooting
42
42
43
43
44
44
44
Troubleshooting
– General
– Network
– Picture
– Sound
– Customer Support
– Open source software notice
6 Appendix
45
45
45
47
48
49
50
51
52
52
52
53
Network Software Update
– Network update notification
– Software Update
Area Code List
Language Code List
Trademarks and Licenses
Audio Output Specifications
Specifications
Maintenance
– Handling the Unit
– Notes on Discs
Important Information Relating to
Network Services
BP690B-P.ASGPLLK_ENG.indd 7
1
2
3
4
5
6
6/24/11 2:20 PM
8
Getting Started
Introduction
1
Playable Discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
e
Blu-ray
y
u
i
r
DVD-ROM
Description
yy Discs such as movies that can be purchased or
rented.
yy BD-R/RE discs that are recorded in BDAV format.
yy BD-R/RE discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Video mode and finalized only
yy Supports the dual layer disc also
DVD-R
DVD-RW
DVD+R
DVD+RW
(8 cm / 12
cm disc)
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
DVD-RW
(VR)
(8 cm / 12
cm disc)
r
Audio CD
(8 cm / 12
cm disc)
t
CD-R/RW
(8 cm / 12
cm disc)
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
VR mode and finalized only
Note
–
Caution
–
BP690B-P.ASGPLLK_ENG.indd 8
Audio CD
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible
damages from abuse.
6/24/11 2:20 PM
Getting Started
,,Note
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal
computer, even if it is recorded in a
compatible format, there are cases in which
it may not play because of the settings of
the application software used to create the
disc. (Check with the software publisher for
more detailed information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
About the “7” Symbol Display
“7” may appear on your TV display during
operation and indicates that the function explained
in this owner’s manual is not available on that
specific media.
Supplied Accessories
RCA Video/Audio
Adaptor (1)
1
Getting Started
yy Depending on the conditions of the
recording equipment or the CD-R/RW (or
DVD±R/RW) disc itself, some CD-R/RW (or
DVD±R/RW) discs cannot be played on the
unit.
9
Remote control (1)
Automotive Adaptor (1) Battery for Remote
Control (Lithium
Battery) (1)
AC Adaptor (1)
(IM120WL-200B)
Carrying Bag (1)
yy The actual AC Adaptor may differ from the
drawing.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting
the option to Live System, you cannot use
it on LG player. (Mastered/Live File System :
Disc format system for windows Vista)
BP690B-P.ASGPLLK_ENG.indd 9
6/24/11 2:20 PM
10
Getting Started
File compatibility
Movie files
1
Getting Started
File
Extension
“.avi”, “.mpg”,
”.divx”, “.mpeg”,
“.mkv”, “.mp4”,
“.asf”
Codec Format
DIVX3.xx, DIVX4.xx, DIVX5.
xx, DIVX6.xx (standard
playback only), XVID,
MPEG1 SS, H.264/MPEG-4
AVC, MPEG2 PS, MPEG2 TS
Audio Format
Dolby Digital,
DTS, MP3,
WMA, AAC,
AC3
Subtitle
SubRip (.srt / .txt), SAMI (.smi), SubStation
Alpha (.ssa/.txt), MicroDVD (.sub/.txt),
VobSub (.sub), SubViewer 1.0 (.sub),
SubViewer 2.0 (.sub/.txt), TMPlayer (.txt),
DVD Subtitle System (.txt)
Music files
File
Extension
“.mp3”, “.wma”
Sampling Frequency
within 11 - 48 kHz (MP3),
within 32 - 48 kHz (WMA)
Bitrate
within 8 - 320 kbps (MP3),
within 32 - 192 kbps (WMA)
Note
Some WAV files are not
supported on this player.
Photo files
File
Extension
“.jpg”, “.jpeg”,
“.png”, ”.gif”
Recommended Size
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
BP690B-P.ASGPLLK_ENG.indd 10
Note
Progressive and lossless compression photo
image files are not supported.
6/24/11 2:20 PM
Getting Started
,,Note
yy The file name is limited to 180 characters.
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
,,Note
yy This player supports UTF-8 files even it
contains Unicode subtitle contents. This
player can not support the pure Unicode
subtitle files.
1
yy Depending on the types of file or ways of
recording, it may not play back.
yy The file requirements on page 10 are not
always compatible. There may have some
restrictions by file features.
yy A disc which was recorded by multi-session
on normal PC is not supported on this
player.
yy The total playback time of music file
indicated on the screen may not correct for
VBR files.
yy To play back a movie file, movie file name
and Subtitle file name must be the same.
yy HD video files contained on the CD or USB
1.0/1.1 may not play properly. Blu-ray Disc,
DVD or USB 2.0 are recommended to play
back HD video files.
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. For a file
with higher level, the warning message will
appear on the screen.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
*1 GMC – Global Motion Compensation
*2 Qpel – Quarter pixel
Getting Started
yy Depending on the size and number of the
files, it may take several minutes to read the
contents on the media.
11
yy If video codec is MPEG2 TS or MPEG2 PS,
subtitle does not play back.
yy The total playback time of music file
indicated on the screen may not correct for
VBR files.
AVCHD (Advanced Video
Codec High Definition)
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital
video camera format.
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than
that of the conventional image compressing
format.
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
BP690B-P.ASGPLLK_ENG.indd 11
6/24/11 2:20 PM
12
1
Getting Started
Certain System Requirements
Regional Code
For high definition video playback:
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD
discs labeled same as the rear of the unit or “ALL”.
yy High definition display that has HDMI input jacks.
yy BD-ROM disc with high definition content.
Getting Started
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
yy An amplifier/receiver with a built-in (Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS or
DTS-HD) decoder.
yy Main, center, surround speakers and subwoofer
as necessary for chosen format.
Compatibility Notes
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized
Customer Service Center.
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1/ Final Standard Profile). Secondary video and
audio can be played from a disc compatible with
the picture-in-picture function. For the playback
method, refer to the instructions in the disc.
yy Viewing high-definition content and upconverting standard DVD content may require a
HDMI-capable input or HDCP-capable DVI input
on your display device.
yy Some BD-ROM and DVD discs may restrict the
use of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you
use HDMI connection for the audio output of the
unit.
yy You can use a USB device to store some discs
related information, including downloaded online content. The disc you are using will control
how long this information is retained.
BP690B-P.ASGPLLK_ENG.indd 12
6/24/11 2:20 PM
Getting Started
Main Unit
13
use a/d to adjust the value. Press ENTER (b)
to confirm the adjustment.
yy RETURN (x): Exits the menu or resumes
playback. The resume play function may not
work depending on the BD-ROM disc.
a
yy HOME: Displays or exits the [Home Menu].
b
yy TITLE/POPUP: Displays the DVD title menu
or BD-ROM’s pop-up menu, if available.
c
j
yy DISC MENU: Accesses menu on a disc.
d
e
i
f
h
k
l
m
n
g
o
p
q
1
Getting Started
fFunction buttons
yy Q.MENU (m): Displays or exits Quick Menu.
gBattery charge and power indicator
yy The indicator turns red in charging and it will
be turned into green when the charging is
complete. (Refer to page 15 for details.)
yy The indicator turns green for a moment
when the unit is turned on.
hOPEN d: Use the slide open key to open the
disc lid.
iDisc lid
jSpeakers
OFF
ON
aLCD screen
bPlayback control buttons (touch sensor
buttons)
yy N (Play/Pause): Press to start playback and
pause playback temporarily, press again to
exit pause mode.
yy C / V (Skip): Goes to the next or
previous chapter / track / file.
yy Z (Stop): Press to stop playback.
cRemote sensor: Point the remote control here.
To control the unit using the remote control, do
not fold the LCD panel down.
k1/! (Power): Switches the unit ON or OFF.
l- VOL (Volume): Adjusts the volume level of
the built-in speaker and earphones.
m< (Earphones): Connect earphones here.
nAV OUT: Connect to a TV with video and audio
input.
oHDMI OUT (Type A): Connect to TV with HDMI
inputs. (Interface for digital audio and video)
pUSB Port: Connect a USB Flash Drive.
qDC 12V IN: Connect the AC adapter or
automotive adapter.
dLAN Port: Connecting to LAN Port will give you,
Network capabilities.
eMenu control buttons
yy w/s/a/d: Use to select an item in the
menu.
yy ENTER: Press to confirm menu selection.
yy OPTION: Press to display the Brightness or
Color menu for LCD display. To adjust the
color or brightness of the LCD display, press
OPTION repeatedly on the main unit to
display the Brightness or Color menu then
BP690B-P.ASGPLLK_ENG.indd 13
6/24/11 2:20 PM
14
Getting Started
Remote control
• • • • • • b • • • • • •
Battery Installation
SCAN (c/v): Searches
backward or forward.
1
Getting Started
SKIP (C/V): Goes to the
next or previous chapter / track /
file.
PAUSE/STEP (M): Pauses
playback. Press repeatedly for
frame-by-frame playback.
PLAY (d): Starts playback.
STOP (Z): Stops playback.
• • • • • • c • • • • • •
0-9 numerical buttons: Selects
numbered options in a menu or
inputs letters in the keypad menu.
REPEAT: Repeats a desired section
or sequence.
• • • • • • a • • • • • • 1 (POWER): Switches the player
ON or OFF.
MARKER: Marks any point during
playback.
SEARCH: Displays or exits the
search menu.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
HOME (n): Displays or exits the
[Home Menu].
Q.MENU (m): Displays or exits
Quick Menu.
Direction buttons: Selects an
option in the menu.
ENTER (b): Acknowledges menu
selection.
RETURN (x): Exits the menu
or resumes playback. The resume
play function may not work
depending on the BD-ROM disc.
CLEAR: Removes a mark on the
search menu or a number when
setting the password.
• • • • • • d • • • • • •
Colored (R, G, Y, B) buttons:
Use to navigate BD-ROM menus.
They are also used for [MOVIE],
[PHOTO], [MUSIC] or [NetCast].
ZOOM: Displays or exits the
[Zoom] menu.
Remove the battery cover on
the rear of the Remote Control,
and insert the battery with the +
facing in the same direction as the
+ on the battery compartment.
yy Replace Remote Control’s
battery with 3 V micro lithium
cells such as CR. 2025 or its
equivalent.
yy Dispose of battery safety in
accordance with local laws. Do
not dispose of in fire.
>>Warning
The battery used in this
device may present a fire
or chemical burn hazard if
mistreated. Do not recharge,
disassemble, incinerate, or
heat above 100 °C (212 °F).
Replace the battery with
Matsushita Elec. Ind. Co., Ltd.
(Panasonic), part no. CR. 2025
only.
Use of another battery
may present a risk of fire or
explosion. Dispose of used
batteries. Keep batteries
away from children. Do not
disassemble or dispose of in
fire.
DISC MENU: Accesses menu on a
disc.
BP690B-P.ASGPLLK_ENG.indd 14
6/24/11 2:20 PM
Getting Started
Using the touch sensor
buttons
revolving it.
To revolve the LCD panel to its original position,
open the LCD panel to a vertical position. Revolve
the LCD panel counterclockwise slowly 180
degrees.
yy When finished using the unit, return the LCD
panel to its original position.
yy Do not leave the LCD panel in the face-up
position, or sudden shocks may damage it.
Rechargeable battery
>>Caution
Precautions for using the touch sensor buttons:
yy Use the touch pad with clean and dry
hands.
yy Do not touch the buttons on the touch pad
with too much force.
yy Do not touch the button on the touch
pad with any conductive material such as
metalic object. It may cause a malfunction.
,,Note
If no button is pressed for a few seconds, the
touch sensor buttons disappear.
Revolving the LCD
panel
1
Getting Started
If you want to use the touchable sensor button,
touch the right of the LCD panel as below.
15
yy The internal rechargeable battery provides you
with the freedom to pass it around and play the
files without the power cord.
yy The internal rechargeable battery will start
when the AC adaptor or Automotive Adapter
is connected to a power outlet or a Cigarette
lighter socket.
yy Charging time on the battery:
- Approximately 4 hours on Power OFF mode.
- Approximately 14 hours on Power ON mode.
yy Operating time on battery: approximately 2
hours and 30 minutes. The operating time on
battery may vary depending on the battery
status, operational status and environment
conditions, and the maximum playing time is
possible up to 3 hours.
yy When the remaining time of the battery power is
under a few minutes, “. Check Battery” will blink
on the screen.
You can revolve the LCD panel of the unit clockwise
a maximum of 180 degrees for use. You can also
operate the unit after revolving the LCD panel 180
degrees and folding it back down.
To revolve the LCD panel, place the unit on a
stable and even surface such as on a table. Push
the LCD panel up and then lift it into a vertical
position. Revolve the LCD panel clockwise slowly
180 degrees. If you need, fold the LCD panel after
BP690B-P.ASGPLLK_ENG.indd 15
6/24/11 2:20 PM
16
Connecting
Connecting the AC
Adaptor
Connect the unit to the power supply with the
supplied AC Adaptor.
Connecting to Your TV
Make one of the following connections, depending
on the capabilities of your existing equipment.
yy Video connection (page 16)
yy HDMI connection (page 17)
,,Note
2
Connecting
Plug into a
power source.
yy Depending on your TV and other
equipment you wish to connect, there are
various ways you could connect the player.
Use only one of the connections described
in this manual.
yy Please refer to the manuals of your TV,
Stereo System or other devices as necessary
to make the best connections.
yy Contact an electrical parts distributor for
assistance in selecting a suitable AC plug adaptor
or AC cord set.
yy This AC adaptor is manufactured by I-MAG
ELECTRONICS (DONG GUAN) CO., LTD.
Connecting the
Automotive Adaptor
Connect the unit to the Cigarette lighter socket
with the supplied Automotive Adaptor.
yy Do not connect the player’s AV OUT jack
to the phono in jack (record player) of your
audio system.
yy Do not connect your player via your VCR.
The image could be distorted by the copy
protection system.
Connecting Audio and Video
cable
Connect the AV OUT on the unit to AV cable
connected from TV with the supplied AV Adaptor.
Audio/Video
Cable
(not supplied)
(White)
(Red)
(Yellow)
Plug into the car’s
cigarette lighter socket.
yy Contact an electrical parts distributor for
assistance in selecting a suitable Automotive
Adaptor.
yy This Automotive Adaptor is manufactured by
LIAN YAO ELECTRONIC TECHNOLOGY (SZ) CO.,
LTD.
BP690B-P.ASGPLLK_ENG.indd 16
6/24/11 2:21 PM
Connecting
HDMI Connection
If you have a HDMI TV or monitor, you can connect
it to this player using a HDMI cable (Type A, High
Speed HDMITM Cable). Connect the HDMI jack on
the player to the HDMI jack on a HDMI compatible
TV or monitor.
17
,,Note
yy When you use HDMI connection, the picture
will not be displayed on the LCD panel.
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or
may not output.
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 18.)
HDMI cable
TV
Set the TV’s source to HDMI (refer to TV’s Owner’s
manual).
yy Changing the resolution when the
connection has already been established
may result in malfunctions. To solve the
problem, turn off the player and then turn it
on again.
2
Connecting
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Setup] menu (see page 25).
yy When the HDMI connection with HDCP
is not verified, TV screen is changed to
black screen. In this case, check the HDMI
connection, or disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m(15 ft.)).
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and
this player. Next, switch on the HDMI/DVI
device and leave it for around 30 seconds,
then switch on this player.
-- The connected device’s video input is set
correctly for this unit.
-- The connected device is compatible with
720x576p, 1280x720p, 1920x1080i or
1920x1080p video input.
yy Not all HDCP-compatible HDMI or DVI devices
will work with this player.
-- The picture will not be displayed properly
with non-HDCP device.
-- This player does not playback and TV screen
is changed to black screen.
BP690B-P.ASGPLLK_ENG.indd 17
6/24/11 2:21 PM
18
Connecting
Resolution Setting
The player provides several output resolutions for
HDMI OUT and LCD panel. You can change the
resolution using [Setup] menu.
1. Press HOME (n).
2. Use a/d to select the [Setup] and press ENTER
(b). The [Setup] menu appears.
2
3. Use w/s to select [DISPLAY] option then press
d to move to the second level.
Connecting
4. Use w/s to select the [Resolution] option then
press ENTER (b) to move to the third level.
,,Note
yy If your TV does not accept the resolution
you have set on the player, you can set
resolution to 576p as follows:
1. Remove the disc from the unit.
2. Press Z (STOP) for more than 5 seconds.
yy When you set the resolution to 576i with
HDMI connection, actual resolution is
outputted to 576p.
yy When you set the resolution to [Auto],
[1080i] or [1080p] for LCD panel, actual
resolution is outputted to 720p.
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
5. Use w/s to select the desired resolution then
press ENTER (b) to confirm your selection.
yy For HDMI OUT: Auto, 576p, 720p, 1080i,
1080p
yy For LCD panel: 576i, 576p, 720p
yy If you select a resolution that your TV
does not accept, the warning message
will appear. After resolution change,
if you cannot see the screen, please
wait 20 seconds and the resolution will
automatically revert back to the previous
resolution.
yy The 1080p video output frame rate may
be automatically set to either 24 Hz or
50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
yy The resolution of the AV OUT jack is always
outputted at 576i.
BP690B-P.ASGPLLK_ENG.indd 18
6/24/11 2:21 PM
Connecting
Connecting to an
Amplifier
Make one of the following connections, depending
on the capabilities of your existing equipment.
19
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT jack to the
corresponding in jack on your amplifier using a
HDMI cable.
yy HDMI Audio connection (page 19)
yy 2CH Analog Audio connection (page 20)
2
About Digital Multi-channel
sound
Connecting
Since many factors affect the type of audio output,
see “Audio Output Specifications” for details (page
50).
HDMI cable
A digital multi-channel connection provides the
best sound quality. For this, you need a multichannel Audio/Video Receiver that supports one
or more of the audio formats supported by your
player. Check the logos on the front of the Audio/
Video receiver and the manual. (PCM Stereo, PCM
Multi-Ch, Dolby Digital, Dolby Digital Plus, Dolby
TrueHD, DTS and/or DTS-HD)
Receiver/Amplifier
HDMI cable
TV
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack.
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 26.)
BP690B-P.ASGPLLK_ENG.indd 19
6/24/11 2:21 PM
20 Connecting
Connecting to an Amplifier via
2 Channel Audio Output
Connect the Left and Right AV OUT jacks on the
player to the audio left and right in jacks on your
amplifier, receiver, or stereo system using audio
cables.
2
Connecting to your
Home Network
This player can be connected to a local area
network (LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, BD-Live interactivity and
streaming services.
Connecting
Wired network connection
Audio/Video
Adapter
Using a wired network provides the best
performance, because the attached devices
connect directly to the network and are not subject
to radio frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a
commercially available LAN or Ethernet cable.
Audio cable
(not supplied)
,,Note
yy When plugging or unplugging the LAN
cable, hold the plug portion of the cable.
When unplugging, do not pull on the LAN
cable but unplug while pressing down on
the lock.
yy Do not connect a modular phone cable to
the LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
Receiver/Amplifier
BP690B-P.ASGPLLK_ENG.indd 20
6/24/11 2:21 PM
Connecting
21
3. Use w/s/a/d to select the IP mode
between [Dynamic] and [Static].
Broadband
service
Normally, select [Dynamic] to allocate an IP
address automatically.
2
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using w/s/a/d
and numerical buttons. If you make a mistake
while entering a number, press CLEAR to clear
the highlighted part.
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follows.
Preparation
Connecting
Router
4. Select [OK] and press ENTER (b) to apply
network settings.
5. The player will ask you to test the network
connection. Select [OK] and press ENTER (b) to
complete the network connection.
6. If you select [Test] and press ENTER (b) at
step 5 above, the network connection status is
displayed on the screen.
You can also test it on the [Connection Status]
in the [Setup] menu.
Before setting the wired network, you need to
connect the broadband internet to your home
network.
1. Select [Connection Setting] option in the
[Setup] menu then press ENTER (b).
2. Select [Yes] and press ENTER (b) to continue.
The new connection settings reset the current
network settings.
BP690B-P.ASGPLLK_ENG.indd 21
6/24/11 2:21 PM
22 Connecting
Notes on Network Connection:
yy Many network connection problems during
set up can often be fixed by re-setting the
router or modem. After connecting the player
to the home network, quickly power off and/
or disconnect the power cable of the home
network router or cable modem. Then power on
and/or connect the power cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms
of service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication
errors/malfunctions associated with your
broadband internet connection, or other
connected equipment.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited
to the number of devices you can connect at
the same time. (If your ISP limits subscription to
one device, this player may not be allowed to
connect when a PC is already connected.)
yy The use of a “Router” may not be allowed or its
usage may be limited depending on the policies
and restrictions of your ISP. For details, contact
your ISP directly.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection
may not be compatible with this player. If you
have questions about such content, please
contact the producer of the disc.
yy Some internet contents may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your
internet service does not allow for such a
connection, you will not be able to connect the
player.
yy You must use a Router to use xDSL service.
BP690B-P.ASGPLLK_ENG.indd 22
6/24/11 2:21 PM
Connecting 23
USB device connection
This player can play movie, music and photo files
contained in the USB device.
Playback content in the USB
device
1. Insert a USB device to the USB port until it fits
into place.
,,Note
yy This player supports USB flash drive/
external HDD formatted in FAT16, FAT32 and
NTFS when accessing files (music, photo,
movie). However, for BD-Live and Audio CD
recording, only FAT16 and FAT32 formats
are supported. Use the USB flash drive/
external HDD formatted in either FAT16 or
FAT32 when using BD-Live and Audio CD
recording.
2
Connecting
yy The USB device can be used for the local
storage for enjoying BD-Live discs with
Internet.
yy This unit can support up to 4 partitions of
the USB device.
yy Do not extract the USB device during
operation (play, etc.).
When you connect the USB device on the HOME
menu, the player plays a music file contained in the
USB storage device automatically. If the USB storage
device is containing various types of files, a menu
for the file type selection will appear.
File loading may take few minutes depending on
the number of contents stored in the USB storage
device. Press ENTER (b) while [Cancel] is selected
to stop loading.
2. Press HOME (n).
3. Select [Movie], [Photo] or [Music] using a/d,
and press ENTER (b).
4. Select the [USB] option using a/d, and press
ENTER (b).
yy A USB device which requires additional
program installation when you have
connected it to a computer, is not
supported.
yy USB device: USB device that supports
USB1.1 and USB2.0.
yy Movie, music and photo files can be played.
For details of operations on each file, refer
to relevant pages.
yy Regular back up is recommended to
prevent data loss.
yy If you use a USB extension cable, USB HUB
or USB Multi-reader, the USB device may not
be recognized.
yy Some USB device may not work with this
unit.
yy Digital camera and mobile phone are not
supported.
yy USB Port of the unit cannot be connected
to PC. The unit cannot be used as a storage
device.
5. Select a file using w/s/a/d, and press
PLAY (d) or ENTER (b) to play the file.
6. Withdraw the USB device carefully.
BP690B-P.ASGPLLK_ENG.indd 23
6/24/11 2:21 PM
3
System Setting
24 System Setting
Settings
[DISPLAY] Menu
TV Aspect Ratio
Adjust the Setup Settings
You can change the settings of the player in the
[Setup] menu.
1. Press HOME (n).
Select a TV aspect ratio option according to your TV
type.
[4:3 Letter Box]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
[4:3 Pan Scan]
3
System Setting
2. Use a/d to select the [Setup] and press ENTER
(b). The [Setup] menu appears.
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
[16:9 Original]
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the
left and right sides.
[16:9 Full]
3. Use w/s to select the first setup option, and
press d to move to the second level.
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is
set to higher than 720p.
4. Use w/s to select a second setup option, and
press ENTER (b) to move to the third level.
5. Use w/s to select a desired setting, and press
ENTER (b) to confirm your selection.
BP690B-P.ASGPLLK_ENG.indd 24
6/24/11 2:21 PM
System Setting 25
Resolution
HDMI Color Setting
Sets the output resolution HDMI video signal. Refer
to page 18 for details about the resolution setting.
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[Auto]
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[YCbCr]
[1080p]
Select when connecting to a DVI display
device.
Outputs 1080 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[720p]
[576p]
Outputs 576 lines of progressive video.
[576i]
Outputs 576 lines of interlaced video.
1080p Display Mode
When the resolution is set to 1080p, select
[24 Hz] for smooth presentation of film material
(1080p/24 Hz) with a HDMI-equipped display
compatible with 1080p/24 Hz input.
,,Note
yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material.
In this case, select [50 Hz].
yy Even when [1080p Display Mode] is set to
[24 Hz], if your TV is not compatible with
1080p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
BP690B-P.ASGPLLK_ENG.indd 25
[RGB]
[LANGUAGE] Menu
3
Display Menu
System Setting
Outputs 720 lines of progressive video.
Select when connecting to a HDMI display
device.
Select a language for the [Setup] menu and onscreen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the
disc was recorded.
[Other]
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
48.
[Off] (Disc Subtitle only)
Turn off Subtitle.
,,Note
Depending on the disc, your language setting
may not work.
6/24/11 2:21 PM
26 System Setting
[AUDIO] Menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
,,Note
Since many factors affect the type of audio
output, see “Audio Output Specifications” on
page 50 for details.
HDMI
[PCM Stereo]
3
System Setting
Select if you connect this unit’s HDMI OUT jack
to a device with two-channel digital stereo
decoder.
[PCM Multi-Ch]
Select if you connect this unit’s HDMI OUT jack
to a device with multi-channel digital decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT jack
to a device with DTS decoder.
[Primary Pass-Thru]
Select if you connect this unit’s HDMI OUT jack
to a device with LPCM, Dolby Digital, Dolby
Digital Plus, Dolby TrueHD, DTS and DTS-HD
decoder.
,,Note
yy When [HDMI] option is set to [PCM MultiCh], the audio may output as PCM Stereo
if the PCM Multi-Ch information is not
detected from HDMI device with EDID.
yy If the [HDMI] option is set to [DTS ReEncode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is outputted
for the other discs (like [Primary Pass-Thru]).
Sampling Freq.
(Digital Audio Output)
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
[96 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit automatically
converts any 192 kHz signals to 96 kHz so your
system can decode them.
[48 kHz]
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz and 96 kHz
signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Off]
Turns off this function.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD
audio output.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital
and Dolby Digital Plus are operated as same as
the [On] mode.
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
BP690B-P.ASGPLLK_ENG.indd 26
6/24/11 2:21 PM
System Setting 27
DTS Neo:6
[LOCK] Menu
If the player is connected to the multi-channel
Audio Receiver by HDMI connection, set this option
to enjoy the multi-channel surround sound with
the 2-channel audio source.
The [LOCK] settings affect only Blu-ray Disc and
DVD playback.
[Music]
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Outputs the multi-channel sounds that are
optimized for listening to music.
Password
[Off]
Outputs the stereo sound via front speakers.
[Cinema]
Outputs the multi-channel sounds that are
optimized for watching movie.
[None]
3
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
[Change]
Enter the current password and press ENTER
(b). Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
yy Only the audio source with less than 48
kHz sampling frequency is available for this
function.
If you forget your password
yy This function is available only when [HDMI]
option is set to [PCM Multi-Ch].
If you forget your password, you can clear it using
the following steps:
System Setting
,,Note
yy This function is not available on an on-line
service.
You can create or change the password.
1. Remove any disc that might be in the player.
2. Select [Password] option in the [Setup] menu.
3. Use Number buttons to enter “210499”. The
password is cleared.
,,Note
If you make a mistake before pressing ENTER
(b), press CLEAR. Then input the correct
password.
DVD Rating
Blocks playback of rated DVD based on their
content. (Not all discs are rated.)
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
BP690B-P.ASGPLLK_ENG.indd 27
6/24/11 2:21 PM
28 System Setting
Blu-ray Disc Rating
BD-Live connection
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
You can restrict Internet access when BD-Live
functions are used.
[255 Year(s)]
[Permitted]
All BD-ROM can be played.
Internet access is permitted for all BD-Live
contents.
[0-254 Year(s)]
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
3
The [Blu-ray Disc Rating] will be applied
only for the Blu-ray Disc that containing the
Advanced Rating Control.
System Setting
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 48.
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, BD-Live and NetCast features.
Connection Setting
If your home network environment is ready
to connect the player, the player needs to be
set the wired network connection for network
communication. (See “Connecting to your Home
Network” on page 20.)
Connection Status
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection
to the network and the internet have been
established.
[Partially permitted]
Internet access is permitted only for BDLive contents which have content owner
certificates. Internet access and AACS Online
functions are prohibited for all BD-Live contents
without a certificate.
[Prohibited]
Internet access is prohibited for all BD-Live
contents.
[OTHERS] Menu
DivX® VOD
ABOUT DIVX VIDEO: DivX® is a digital video format
created by DivX, Inc. This is an official DivX Certified®
device that plays DivX video. Visit divx.com for more
information and software tools to convert your files
into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
Certified® device must be registered in order to play
purchased DivX Video-on-Demand (VOD) movies.
To obtain your registration code, locate the DivX
VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete
your registration.
[Register]
Displays the registration code of your player.
[Deregister]
Deactivate your player and display the
deactivation code.
,,Note
All the downloaded videos from DivX VOD
with this player’s registration code can only be
played back on this unit.
BP690B-P.ASGPLLK_ENG.indd 28
6/24/11 2:21 PM
System Setting 29
Auto Power Off
The screen saver appears when you leave the player
in Stop mode for about 5 minutes. If you set this
option to [On], the unit automatically turns itself off
after the Screen Saver is displayed for 5 minutes.
Set this option to [Off ] to leave the screen saver
until the unit is operated by the user.
Initialize
[Factory Set]
You can reset the player to its original factory
settings.
[Blu-ray Storage Clear]
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have
to set all the activation for the on-line services
and network settings again.
3
System Setting
Initializes the BD-Live contents from the
connected USB storage.
Software
[Information]
Displays the current software version.
[Update]
You can update the software by connecting
the unit directly to the software update server
(see page 45).
Disclaimer Notice
Press ENTER (b) to view the notice of Network
Service Disclaimer on page 53.
BP690B-P.ASGPLLK_ENG.indd 29
6/24/11 2:21 PM
4
Operating
30 Operating
General Playback
,,Note
Using [HOME] menu
yy Playback functions described in this manual
are not always available in every file and
media. Some functions can be restricted
depending on many factors.
The home menu appears when you press
HOME (n). Use a/d to select a category and
press ENTER (b).
yy Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
yy Unfinalized DVD-VR format discs may not
be played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
Playing a file on a disc/USB
device
yui
4
Operating
a [Movie] - Plays video contents.
b [Photo] - Plays photo contents.
c [Music] - Plays audio contents.
d [NetCast] - Accesses to the NetCast Home.
e [Setup] - Adjusts the system settings.
Playing a Disc
ert
1. Turn on the Power Switch.
This player can play video, audio and photo files
contained in the disc or USB device.
1. Insert a data disc on the tray or connect a USB
device. ( When you insert the USB device, the
USB option menu will be appeared to select for
[Movie], [Photo] or [Music]. )
2. Select [Movie], [Photo] or [Music] using a/d,
and press ENTER (b).
3. Select [Data] or [USB] option using a/d, and
press ENTER (b).
4. Select a file using w/s/a/d, and press d
(PLAY) or ENTER (b) to play the file.
2. Open the disc lid and insert a disc.
3. Close the disc lid.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
4. Press HOME (n).
5. Select [Movie] or [Music] using a/d, and press
ENTER (b).
6. Select [Blu-ray Disc], [DVD], [VR] or [Audio]
option using a/d, and press ENTER (b).
BP690B-P.ASGPLLK_ENG.indd 30
6/24/11 2:21 PM
Operating
31
Enjoying BD-LiveTM
e
Basic operations for video and
audio content
BD-ROM supporting BD-Live (BD-ROM version 2
Profile 2) that has a network extension function
allows you to enjoy more functions such as
downloading new movie trailers by connecting this
unit to the internet.
To stop playback
1. Check the network connection and settings
(page 20).
Press M (PAUSE/STEP) while playback.
Press d (PLAY) to resume playback.
2. Insert a USB storage device to the USB port on
the unit.
To play frame-by-frame (Video)
A USB storage device is needed to download
bonus content.
3. Press HOME (n), and set the [BD-Live
connection] option on the [Setup] menu (page
28).
Depending on a disc, the BD-Live function may
not be operated if [BD-Live connection] option
is set to [Partially Permitted].
The operations are differ depending on the disc.
Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device
while content is being downloaded or a Bluray Disc is still in the player. Doing so may
damage the connected USB device and BDLive features may not operate properly with
the damaged USB device anymore. If the
connected USB device seems damaged from
such an action, you can format the connected
USB device from the PC and reuse it with this
player.
To pause playback
Press M (PAUSE/STEP) while movie playback.
Press M (PAUSE/STEP) repeatedly to play Frame-byFrame playback.
To scan forward or backward
Press c or v to play fast forward or fast reverse
during playback.
4
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
Operating
4. Insert a BD-ROM with BD-Live.
Press Z (STOP) while playback.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
,,Note
yy Some BD-Live contents may be restrictively
accessed in some territories by contents
provider’s own decision.
yy It may take up to several minutes to load
and start enjoying BD-Live contents.
BP690B-P.ASGPLLK_ENG.indd 31
6/24/11 2:21 PM
32 Operating
Basic operations for photo
content
To play a slide show
Press d (PLAY) to start slide show.
To stop a slide show
Press Z (STOP) while slide show.
To pause a slide show
Press M (PAUSE/STEP) while slide show.
Press d (PLAY) to re-start the slide show.
To skip to the next/previous photo
While viewing a photo in full screen, press a or d
to go to the previous or next photo.
4
Operating
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after
loading a disc which contains a menu. If you want
to display the disc menu while playback, press DISC
MENU.
Use w/s/a/d buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears while playback.
Press TITLE/POPUP while playback, and use w/s/
a/d buttons to navigate through menu items.
Resume playback
eroyt
u
The unit records the point where you pressed the
Z (STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode .
Last Scene Memory
ert
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
BP690B-P.ASGPLLK_ENG.indd 32
6/24/11 2:21 PM
Operating 33
Advanced Playback
Repeat Playback
erotu
y
During playback, press REPEAT repeatedly to select
a desired repeat mode.
Blu-ray Discs/DVDs/ MOVIE
jA- – Selected portion will be repeated continually.
Repeating a specific portion
eroty
This player can repeat a portion you have selected.
1. While playback, press REPEAT to select [A-] at
the beginning of the portion you wish to repeat.
2. Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
3. To return to normal playback, press REPEAT
repeatedly to select [Off ].
,,Note
jChapter – The current chapter will be played
back repeatedly.
yy You cannot select a portion less than 3
seconds.
jTitle – The current title will be played back
repeatedly.
jAll – All the tracks or files will be played back
repeatedly.
yy This function may not work on some discs
or titles.
To return to normal playback, press REPEAT
repeatedly to select [Off ].
kA-B – Selected portion will be repeated
continually. (Audio CD only)
4
1. During playback or pause mode, press ZOOM to
display the [Zoom] menu.
;Track – The current track or file will be played
back repeatedly.
2. Use red (R) or green (G) colored button to zoom
out or in the picture. You can move through the
zoomed picture using w/s/a/d buttons.
:All – All the tracks or files will be played back
repeatedly.
3. To return to the normal picture size, press yellow
(Y) colored button.
l:All – All the tracks or files will be played
back repeatedly in random order.
4. Press RETURN (x) to exit the [Zoom] menu.
Operating
Audio CDs/Music files
Enlarge the playback image
eroyi
l – The tracks or files will be played back in
random order.
To return to normal playback, press CLEAR.
,,Note
yy If you press V once during Repeat
Chapter/Track playback, the repeat playback
cancels.
yy This function may not work on some disc or
title.
BP690B-P.ASGPLLK_ENG.indd 33
6/24/11 2:21 PM
34 Operating
Marker Search
eroy
Using the search menu
eroy
You can start playback from up to nine memorized
points.
Using search menu, you can easily to find the point
where you want to start playback.
To enter a marker
To search a point
1. While playback, press MARKER at the desired
point. The Marker icon appears on the TV screen
briefly.
1. During playback, press SEARCH to display the
search menu.
2. Repeat step 1 to add up to nine markers.
To recall a marked scene
1. Press SEARCH and the search menu appears on
the screen.
2. Press a number button to select a marker
number that you want to recall. Playback starts
from the marked scene.
4
To delete a Marker
Operating
1. Press SEARCH and the search menu appears on
the screen.
2. Press s to highlight a marker number.
Use a/d to select a marked scene that you
want to delete.
3. Press CLEAR and the marked scene is erased
from the search menu.
2. Press a/d to skip the playback 15 seconds
forward or backward. You can select a point that
you want to skip by pressing and holding a/d
button.
To start playback from a marked
scene
1. Press SEARCH and the search menu appears on
the screen.
2. Press s to highlight a marker number. Use a/
d to select a marked scene that you want to
start playback.
3. Press ENTER (b) to start playback from the
marked scene.
,,Note
This function may not work depending on
discs, titles or file types.
,,Note
yy This function may not work depending on
discs, titles or file types.
yy All marked points are cleared if the title
is in complete stop (Z) mode, the title is
changed or if you unload the disc.
yy If the total length of the title is less than 10
seconds, this function is not available.
BP690B-P.ASGPLLK_ENG.indd 34
6/24/11 2:21 PM
Operating 35
Changing content list view
yui
Viewing content information
y
On the [Movie], [Music] or [Photo] menu, you can
change the content list view.
The player can display the content information.
Method 1
2. Press Q.MENU (m) to display the option menu.
Press red (R) colored button repeatedly.
1. Select a file using w/s/a/d.
3. Select the [Information] option using w/s, and
press ENTER (b).
The file information appears on the screen.
While movie playback, you can display the file
information by pressing TITLE/POPUP.
,,Note
The information displayed on the screen may
not be correct compared with actual content
information.
Selecting a subtitle file
y
4
1. Use w/s/a/d to select the subtitle file you
wish to play in the [Movie] menu.
Operating
If the subtitle file name is different from the movie
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
2. Press ENTER (b).
Method 2
1. On the content list, press Q.MENU (m) to
display the option menu.
2. Use w/s to select the [View Change] option.
3. Press ENTER (b) to change the content list
view.
BP690B-P.ASGPLLK_ENG.indd 35
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the movie file.
,,Note
If you press Z (STOP) while playback, the
subtitle selection is cancelled.
6/24/11 2:21 PM
36 Operating
Options while viewing a photo
i
You can use various options during viewing a
photo in full screen.
1. While viewing a photo in full screen, press
Q.MENU (m) to display the option menu.
2. Select an option using w/s.
Listening to music while slide
show
i
You can display photo files while listening to music
files.
1. While viewing a photo in full screen, press
Q.MENU (m) to display the option menu.
2. Use w/s to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
3. Use w/s to select a device, and press ENTER (b).
4. Use w/s to select a file or a folder you wish to
play.
4
Operating
a Current photo/Total number of photos
– Use a/d to view previous/next photo.
b Slide Show – Press ENTER (b) to start or
pause slide show.
c Music Select – Select the background
music for the slide show (page 36).
d Music –Press ENTER (b) to start or pause
background music. This option is capable
only if a music file or folder is selected
using the [Music Select] option.
Select g and press ENTER (b) to display the
upper directory.
5. Use d to select [OK], and press ENTER (b) to
complete music selection.
e Rotate – Press ENTER (b) to rotate the
photo clockwise.
f Zoom – Press ENTER (b) to display the
[Zoom] menu (page 33).
g Effect – Use a/d to select a transition
effect between photos in a slide show.
(None, Random, Slide, Door, Lattice)
h Speed – Use a/d to select a delaying
speed between photos in a slide show.
(Normal, Fast, Slow)
3. Press RETURN (x) to exit the option menu.
BP690B-P.ASGPLLK_ENG.indd 36
6/24/11 2:21 PM
Operating 37
On-Screen display
You can display and adjust various information and
settings about the content.
Displaying content information
on-screen
eroy
1. While playback, press Q.MENU (m) to show
various playback information.
,,Note
yy If no button is pressed for a few seconds,
the on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on
discs or titles.
yy If a interactive Blu-ray Disc is playing back,
some setting information is displayed on
the screen but prohibited to be changed.
Playing from selected time
eroy
1. Press Q.MENU (m) during playback. The time
search box shows the elapsed playing time.
2. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
4
Operating
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press a/d to skip the playback 60 seconds
forward or backward.
a Title – current title number/total number of
titles
b Chapter – current chapter number/total
number of chapters
3. Press ENTER (b) to start playback from selected
time.
,,Note
This function may not work depending on
discs, titles or file types.
c Time – elapsed playing time/total playback
time
d Audio – selected audio language or channel
e Subtitle – selected subtitle.
f Angle – selected angle/total number of
angles
g TV Aspect Ratio – selected TV aspect Ratio
h Picture Mode – selected picture mode
2. Select an option using w/s.
3. Use a/d to adjust the selected option value.
4. Press RETURN (x) to exit the On-Screen
display.
BP690B-P.ASGPLLK_ENG.indd 37
6/24/11 2:21 PM
38 Operating
Hearing a different audio
eroy
1. During playback, press Q.MENU (m) to display
the On-Screen display.
2. Use w/s to select the [Audio] option.
3. Use a/d to select desired audio language,
audio track or audio channel.
,,Note
4
Watching from a different
angle
er
If the disc contains scenes recorded at different
camera angles, you can change to a different
camera angle during playback.
1. During playback, press Q.MENU (m) to display
the On-Screen display.
yy Some discs allow you to change audio
selections only via the disc menu. In this
case, press TITLE/POP-UP or DISC MENU
button and choose the appropriate audio
from the selections on the disc menu.
2. Use w/s to select the [Angle] option.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
Changing the TV Aspect Ratio
eroy
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
3. Use a/d to select desired angle.
4. Press RETURN (x) to exit the On-Screen
display.
You can change the TV aspect ratio setting while
playback.
Operating
1. During playback, press Q.MENU (m) to display
the On-Screen display.
Selecting a subtitle language
eroy
2. Use w/s to select the [TV Aspect Ratio]
option.
1. During playback, press Q.MENU (m) to display
the On-Screen display.
4. Press RETURN (x) to exit the On-Screen
display.
3. Use a/d to select desired option.
2. Use w/s to select the [Subtitle] option.
3. Use a/d to select desired subtitle language.
4. Press RETURN (x) to exit the On-Screen
display.
,,Note
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
BP690B-P.ASGPLLK_ENG.indd 38
6/24/11 2:21 PM
Operating 39
Changing the Picture Mode
eroy
Changing subtitle code page
y
You can change the [Picture mode] option while
playback.
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
1. During playback, press Q.MENU (m) to display
the On-Screen display.
2. Use w/s to select the [Picture Mode] option.
3. Use a/d to select desired option.
4. Press RETURN (x) to exit the On-Screen
display.
1. During playback, press Q.MENU (m) to display
the playback menu.
2. Use w/s to select the [Code Page] option.
3. Use a/d to select desired code option.
Setting the [User setting] option
1. During playback, press Q.MENU (m) to display
the On-Screen display.
2. Use w/s to select the [Picture Mode] option.
3. Use a/d to select the [User setting] option,
and press ENTER (b).
4
Operating
4. Press RETURN (x) to exit the On-Screen
display.
Displaying MP3 music
information (ID3 Tag)
1. Select a music file using w/s/a/d
2. Press Q.MENU (m) to display the option menu.
4. Use w/s/a/d to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
5. Use w/s/a/d to select the [Close] option,
and press ENTER (b) to finish setting.
BP690B-P.ASGPLLK_ENG.indd 39
3. Select [Information] option using w/s, and
press ENTER (b).
4. The music information will be displayed on the
screen.
,,Note
Depending on the MP3 files, information may
not be displayed on the screen.
6/24/11 2:21 PM
40 Operating
Audio CD Recording
You can record one desired track or all of the tracks
in Audio CD to a USB storage device.
1. Insert a USB storage device to the USB port on
the unit.
2. Insert an Audio CD.
The playback starts automatically.
3. Press Q.MENU (m) to display the option menu.
4. Use w/s to select [CD Recording] option, and
press ENTER (b).
5. Use w/s to select a track you wish to copy on
the menu, and press ENTER (b).
Repeat this step to select tracks as many as you
can.
Selects all the tracks on an
Audio CD.
4
Operating
Selects an encoding option
from the pop-up menu
(128 kbps, 192 kbps, 320 kbps)
Cancels the recording and
returns to the previous screen.
6. Use w/s/a/d to select [Start], and press
ENTER (b).
7. Use w/s/a/d to select a destination folder
to be copied.
9. A message appears when Audio CD recording is
completed. Press ENTER (b) to check the music
file created in the destination folder.
,,Note
yy The table below shows the average
recording time from an audio track with
4 minutes of playback time to a music file
with 192 kbps as an example.
stop mode
while playback
1 min.
4 min.
yy Recording times in the table above are
approximate.
yy Actual recording time for USB storage
device varies depending on the USB storage
device’s ability.
yy Make sure that there is minimum of 50 MB
free space is needed when recording into
the USB storage device.
yy The length of the music should be longer
than 20 seconds for the proper recording.
yy Do not turn off this player or extract the
connected USB storage device during Audio
CD recording.
>>Caution
The recording or copying features on this
player are provided for your personel and
non-commercial use. The making of
unauthorized copies of copy-protected
material, including computer programs, files,
broadcasts and sound recordings, may be an
infringement of copyrights and constitute a
criminal offense. This equipment should not be
used for such purposes. LG expressly disclaims
any responsibility for illegal distribution or
use of unauthorized content in commercial
purpose.
Be Responsible
Respect Copyrights
If you want to create a new folder, use
w/s/a/d to select [New Folder] and press
ENTER (b).
Enter a folder name using virtual keyboard, and
press ENTER (b) while [OK] is selected.
8. Use w/s/a/d to select [OK], and press
ENTER (b) to start Audio CD recording.
If you want to stop Audio CD recording, press
ENTER (b) while [Cancel] is highlighted.
BP690B-P.ASGPLLK_ENG.indd 40
6/24/11 2:21 PM
Operating
41
Enjoying the NetCast™
Entertainment Access
You can use various content services via Internet
with the NetCast Entertainment Access feature.
1. Check the network connection and settings
(page 20).
2. Press HOME (n).
3. Select the [NetCast] using a/d, and press
ENTER (b).
4. Select an option using a/d, and press
ENTER (b).
yy Detailed information of each service,
contact to the content provider or visit
support link of the service.
4
Operating
,,Note
yy The content of NetCast services and service
related information, including user interface,
is subject to changes. Please refer to the
web site of each service for most up-to-date
information.
BP690B-P.ASGPLLK_ENG.indd 41
6/24/11 2:21 PM
5
Troubleshooting
42 Troubleshooting
Troubleshooting
General
Symptom
Cause & Solution
The Power does not turn on.
yy Plug the power cord into the wall outlet securely.
yy The battery is discharged. Recharge the battery.
The unit does not start
playback.
yy Insert a playable disc. (Check the disc type, colour system, and
regional code.)
yy Place the disc with the playback side down.
yy Place the disc in the player correctly inside the guide.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music files.
yy The files are not recorded in a format that the unit can play.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The unit does not support the codec of the movie file.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
5
yy The batteries in the remote control are exhausted.
Troubleshooting
The unit is plugged in, but the
power will not turn on or off.
The unit is not operating
normally.
BP690B-P.ASGPLLK_ENG.indd 42
You can reset the unit as follows.
yy Switch off the unit using the power switch on the unit and leave it for
5 seconds. Next, switch on the unit to reset.
6/24/11 2:21 PM
Troubleshooting 43
Network
Symptom
Cause & Solution
BD-Live feature does not
yy The connected USB storage may not have enough space. Connect
the USB storage with at least 1GB free space.
work.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (see page 20).
yy Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
yy The [BD-Live connection] option in the [Setup] menu is set to
[Prohibited]. Set the option to [Permitted].
Streaming video services (such
as YouTube™, etc.) are often
stopped or “buffer” during
playback.
yy Your broadband service speed may not be fast enough to stream
video services. Contact your Internet Service Provider (ISP) and
increase the broadband speed.
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture
from the unit appears on the TV screen.
5
yy Connect the video connection securely.
Troubleshooting
yy Check the [HDMI Color Setting] in the [Setup] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does
not support copyright protection.
Picture noise appears.
yy You are playing a disc recorded in a color system that is different from
your TV.
yy Set the resolution which your TV accepts.
BP690B-P.ASGPLLK_ENG.indd 43
6/24/11 2:21 PM
44 Troubleshooting
Sound
Symptom
Cause & Solution
There is no sound or the sound
is distorted.
yy The volume is set to minimum. Use the volume controller to adjust
the volume.
yy The earphone jack is connected to the unit. Separate the earphone
jack from the unit.
yy Connect the audio connection securely.
yy The input source setting on the amplifier or the connection to the
amplifier is incorrect.
yy The unit is in scan, slow motion, or pause mode.
yy The sound volume is low.
yy Check that the connected amplifier is compatible with audio format
output from the unit.
yy The unit’s HDMI OUT jack is connected to a DVI device. The DVI jack
does not accept audio signal.
yy Check the device connected to unit’s HDMI OUT jack is compatible
with audio format output from the unit.
Customer Support
5
Troubleshooting
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made),
please visit http://lgservice.com or contact LG Electronics customer care center.
Open source software notice
To obtain the corresponding source code under GPL, LGPL and other open source licenses, please visit
http://opensource.lge.com. All referred license terms, warranty disclaimers and copyright notices are
available to download with the source code.
BP690B-P.ASGPLLK_ENG.indd 44
6/24/11 2:21 PM
6
Appendix
Appendix 45
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be
made available to units that are connected to a
broadband home network. If there is new software
available and the unit is connected to a broadband
home network, the player will inform you about the
update as follows.
Software Update
You can update the player using the latest software
to enhance the products operation and/or add
new features. You can update the software by
connecting the unit directly to the software update
server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
Option 1:
yy During the software update procedure,
do not turn off the player or disconnect
AC power, or do not press any button.
1. The update menu will appear on the screen
when you turn on the player.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
2. Use a/d to select a desired option and then
press ENTER (b).
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 20).
2. Select [Software] option in the [Setup] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
Starts the software update.
[Cancel]
Exits the update menu and
displays it next booting.
[Hide]
Exits the update menu and
it does not appear until next
software is uploaded in the
update server.
6
Appendix
[OK]
The player will check for the newest update.
,,Note
Option 2:
yy Pressing ENTER (b) while checking for the
update will end the process.
If the software update is available from the update
server, the “Update” icon appears at the bottom of
the Home menu. Press blue (B) colored button to
start the update procedure.
yy If there is no update available, the Message,
“No update is found.” appears. Press ENTER
(b) to return to the [Home Menu].
4. If newer version exists, the message “A new
update was found. Do you want to download
it?” appears.
BP690B-P.ASGPLLK_ENG.indd 45
6/24/11 2:21 PM
46 Appendix
5. Select [OK] to download the update. (Selecting
[Cancel] will end the update.)
6. The player starts downloading the newest
update from the server. (Downloading will
takes several minutes depending on your home
network condition)
7. When downloading is completed, the message,
“Download is complete. Do you want to
update?” appears.
8. Select [OK] to start updating.
(Selecting [Cancel] will end the update and
downloaded file will not be re-usable. To update
software the next time, the software update
procedure has to be started from the beginning
again.)
>>Caution
Do not turn off the power during the software
update.
9. When update is completed, the power will be
turned off automatically in a few seconds.
10.Turn the power back on. The system now
operates with the new version.
,,Note
6
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer Support” on page
44.
Appendix
BP690B-P.ASGPLLK_ENG.indd 46
6/24/11 2:21 PM
Appendix 47
Area Code List
Choose an area code from this list.
Area
Code Area
AF Fiji Afghanistan Code Area
Code Area
Code
FJ Monaco MC Singapore SG
SK
Argentina AR Finland FI Mongolia MN Slovak Republic Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
SI
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway NO Switzerland CH
Canada CA India IN Oman OM Taiwan TW
Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica JM Philippines PH Ukraine UA
Costa Rica CR Japan JP Poland PL United States US
Croatia HR Kenya KE Portugal PT Uruguay UY
Czech Republic CZ Kuwait KW Romania RO Uzbekistan UZ
Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives MY Saudi Arabia MV Senegal Ethiopia ET Mexico MX
Vietnam RU Zimbabwe SA
SN
VN
ZW
6
Appendix
BP690B-P.ASGPLLK_ENG.indd 47
LY Russian
LU Federation TH
6/24/11 2:21 PM
48 Appendix
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
6
Language
Code
Language
Code
Language
Code
Language
Code
Afar 6565
French 7082
Lithuanian 7684
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
8387
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
7065
Turkmen 8475
Appendix
Bulgarian 6671
Interlingua 7365
Persian Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
Esperanto 6979
Kurdish 7585
Scots Gaelic 7168
Xhosa 8872
Estonian 6984 Laotian Faroese 7079
Fiji 7074
Finnish 7073
BP690B-P.ASGPLLK_ENG.indd 48
7679
Serbian 8382
Yiddish 7473
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Lingala 7678
6/24/11 2:21 PM
Appendix 49
Trademarks and
Licenses
Blu-ray Disc™, Blu-ray™, BD-Live™, BONUSVIEW™
and the logos are trademarks of the Blu-ray Disc
Association.
Java and all Java-based trademarks and logos
are trademarks or registered trademarks of Sun
Microsystems, Inc. in the United States and other
countries.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,226,616; 6,487,535; 7,212,872; 7,333,929;
7,392,195; 7,272,567 & other U.S. and worldwide
patents issued & pending. DTS and the symbol
are registered trademarks, & DTS-HD, DTS-HD
Master Audio, and the DTS logos are trademarks
of DTS, Inc. Product includes software. © DTS, Inc.
All Rights Reserved.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
“x.v.Color” is a trademark of Sony Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI licensing LLC.
Manufactured under license from Dolby
Laboratories. Dolby and the double-D symbol
are trademarks of Dolby Laboratories.
BP690B-P.ASGPLLK_ENG.indd 49
6
Appendix
DivX®, DivX Certified® and associated logos
are trademark of DivX, Inc., and are used under
license.
6/24/11 2:21 PM
50 Appendix
Audio Output Specifications
Jack/Setting
Source
HDMI OUT
PCM Stereo
PCM Multi-Ch
DTS Re-encode *3
Primary Pass-Thru *1 *2
Dolby Digital
PCM 2ch
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
PCM 2ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 2ch
PCM 2ch
DTS (2ch)
Dolby TrueHD
DTS
PCM 2ch
PCM 5.1ch
DTS
DTS
DTS-HD
PCM 2ch
PCM 7.1ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
PCM 2ch
DTS
Linear PCM 2ch
Linear PCM 5.1ch
PCM 2ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 2ch
PCM 7.1ch
DTS
Linear PCM 7.1ch
*1 The secondary and interactive audio may not be included in the output bitstream if [HDMI] option is set
to [Primary Pass-Thru]. (Except LPCM Codec: the output always includes interactive and secondary audio.)
*2 This player automatically selects the HDMI audio according to the decoding capability of the connected
HDMI device even though [HDMI] option is set to [Primary Pass-Thru].
*3 If the [HDMI] option is set to [DTS re-encode], the audio output is limited to 48 kHz and 5.1Ch. If the
[HDMI] option is set to [DTS re-encode], the DTS Re-encode audio is outputted for BD-ROM discs, and the
original audio is outputted for the other discs (like [Primary Pass-Thru]).
yy The audio is outputted as PCM 48 kHz/16 bit for MP3/WMA file and PCM 44.1kHz/16 bit for Audio CD
while playback.
yy You must select a digital audio output and a maximum sampling frequency that your Amplifier (or AV
receiver) accepts using [HDMI] and [Sampling Freq.] options on the [Setup] menu (see page 26).
yy With HDMI digital audio connection, Disc Menu button sounds of BD-ROM may not be heard if the [HDMI]
option is set to [Primary Pass-Thru].
6
yy If the audio format of the HDMI digital output does not match the capabilities of your receiver, the receiver
will produce a strong, distorted sound or no sound at all.
Appendix
yy Multi-channel Digital Surround Sound via HDMI connection can only be obtained if your receiver is
equipped with a Digital Multi-channel decoder.
BP690B-P.ASGPLLK_ENG.indd 50
6/24/11 2:21 PM
Appendix
51
Specifications
General
Power requirements
12 V 0 2 A
AC adaptor requirements
100 - 240 V ~ 1 A, 50/60 Hz
Automotive Adaptor requirements 8.5 V -16 V DC
Power consumption
18 W
Dimensions (W x H x D)
Approx. (281 x 41 x 174.5) mm
Net Weight (Approx.)
1.4 kg
Operating temperature
5 °C to 40 °C
Operating humidity
5 % to 90 %
Outputs
yy ø 3.5 mm mini jack x 1
AUDIO/VIDEO OUT
yy Video Out: 1.0 V (p-p), 75 Ω, sync negative
yy Audio Out: 1.5 Vrms (1 kHz, 0 dB)
HDMI OUT (video/audio)
19 pin (Type A, HDMITM Connector)
Earphone terminal
ø 3.5 mm stereo mini jack x 2
System
Semiconductor laser
Wavelength
405 nm / 650 nm
Signal system
Standard PAL color TV system
Frequency response
20 Hz to 20 kHz (48 kHz, 96 kHz, 192 kHz sampling)
Signal-to-noise ratio
More than 90 dB (AV OUT connector only)
Harmonic distortion
Less than 0.02%
Dynamic range
More than 85 dB
LAN port
Ethernet jack x 1, 10BASE-T / 100BASE-TX
Bus Power Supply (USB)
DC 5 V 0 500 mA
6
Appendix
Laser
Liquid Crystal Display
Panel size
22.9 cm (diagonal)
Projection system
R.G.B. stripe
Driving system
TFT active matrix
Resolution
800 x 480 (WVGA)
yy Design and specifications are subject to change without notice.
BP690B-P.ASGPLLK_ENG.indd 51
6/24/11 2:21 PM
52 Appendix
Maintenance
Notes on Discs
Handling Discs
Handling the Unit
When shipping the unit
Please save the original shipping carton and
packing materials. If you need to ship the unit, for
maximum protection, re-pack the unit as it was
originally packed at the factory.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide
spray near the unit.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in
contact with the unit for a long period of time.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not
use strong solvents such as alcohol, benzine, or
thinner, as these might damage the surface of the
unit.
Do not touch the playback side of the disc. Hold
the disc by the edges so that fingerprints do not
get on the surface. Never stick paper or tape on the
disc.
Storing Discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning Discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to out.
Do not use strong solvents such as alcohol,
benzine, thinner, commercially available cleaners,
or anti-static spray intended for older vinyl records.
Maintaining the Unit
6
Appendix
The unit is a high-tech, precision device. If the
optical pick-up lens and disc drive parts are dirty
or worn, the picture quality could be diminished.
For details, please contact your nearest authorized
service center.
BP690B-P.ASGPLLK_ENG.indd 52
6/24/11 2:21 PM
Appendix 53
Important Information
Relating to Network
Services
All information, data, documents, communications,
downloads, files, text, images, photographs,
graphics, videos, webcasts, publications, tools,
resources, software, code, programs, applets,
widgets, applications, products and other content
(“Content”) and all services and offerings (“Services”)
provided or made available by or through any
third party (each a “Service Provider”) is the sole
responsibility of the Service Provider from whom it
originated.
The availability of and access to Content and
Services furnished by the Service Provider through
the LGE Device are subject to change at any time,
without prior notice, including, but not limited to
the suspension, removal or cessation of all or any
part of the Content or Services.
Should you have any inquiry or problem related
to the Content or Services, you may refer to the
Service Provider’s website for the most up-todate information. LGE is neither responsible nor
liable for customer service related to the Content
and Services. Any question or request for service
relating to the Content or Services should be made
directly to the respective Content and Service
Providers.
BP690B-P.ASGPLLK_ENG.indd 53
6
Appendix
Please note that LGE is not responsible for any
Content or Services provided by the Service
Provider or any changes to, removal of, or cessation
of such Content or Services and does not warrant
or guaranty the availability of or access to such
Content or Services.
6/24/11 2:21 PM
BP690B-P.ASGPLLK_ENG.indd 54
6/24/11 2:21 PM
Download PDF

advertising