OWNER’S MANUAL
Ultra HD
Blu-ray Disc™
Player
Please read this manual carefully before operating
your set and retain it for future reference.
MODEL
UBK80
www.lg.com
Copyright © 2018 LG Electronics Inc. All Rights Reserved.
2
Getting Started
Safety Information
1
CAUTION
Getting Started
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
This lightning flash with arrowhead
symbol within an equilateral
triangle is intended to alert the
user to the presence of uninsulated
dangerous voltage within the
product’s enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended
to alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the product.
WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK
HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN
OR MOISTURE.
WARNING: Do not install this equipment in a
confined space such as a book case or similar unit.
NOTICE: For safety marking information including
product identification and supply ratings, please refer
to the main label on the bottom or the other surface
of the product.
CAUTION: The apparatus shall not be exposed to
water (dripping or splashing) and no objects filled
with liquids, such as vases, shall be placed on the
apparatus.
CAUTION: Do not use high voltage products around
this product. (ex. Electrical swatter) This product may
malfunction due to electrical shock.
CAUTION: No naked flame sources, such as lighted
candles, should be placed on the apparatus.
CAUTION: Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
Slots and openings in the cabinet are provided
for ventilation and to ensure reliable operation of
the product and to protect it from over heating.
The openings shall never be blocked by placing
the product on a bed, sofa, rug or other similar
surface. This product shall not be placed in a builtin installation such as a bookcase or rack unless
proper ventilation is provided or the manufacturer’s
instruction has been adhered to.
CAUTION: This product employs a Laser System.
To ensure proper use of this product, please read
this owner’s manual carefully and retain it for future
reference. Shall the unit require maintenance, contact
an authorized service center.
Use of controls, adjustments or the performance of
procedures other than those specified herein may
result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try
to open the enclosure.
CAUTION concerning the Power Cord
The Power Plug is the disconnecting device. In case
of an emergency, the Power Plug must remain readily
accessible.
Check the specification page of this owner’s manual
to be certain of the current requirements. Do not
overload wall outlets. Overloaded wall outlets, loose
or damaged wall outlets, extension cords, frayed
power cords, or damaged or cracked wire insulation
are dangerous. Any of these conditions could result
in electric shock or fire. Periodically examine the
cord of your device, and if its appearance indicates
damage or deterioration, unplug it, discontinue use of
the device, and have the cord replaced with an exact
replacement part by an authorized service center.
Protect the power cord from physical or mechanical
abuse, such as being twisted, kinked, pinched, closed
in a door, or walked upon. Pay particular attention to
plugs, wall outlets, and the point where the cord exits
the device.
Getting Started
This device is equipped with a portable battery or
accumulator.
Notes on Copyrights
yy Because AACS (Advanced Access Content
System) is approved as content protection system
for Blu-ray Disc format, similar to use of CSS
(Content Scramble System) for DVD format,
certain restrictions are imposed on playback,
analog signal output, etc., of AACS protected
contents. The operation of this product and
restrictions on this product may vary depending
on your time of purchase as those restrictions
may be adopted and/or changed by AACS after
the production of this product.
yy Furthermore, BD-ROM Mark and BD+ are
additionally used as content protection systems
for Blu-ray Disc format, which imposes certain
restrictions including playback restrictions for
BD-ROM Mark and/or BD+ protected contents. To
obtain additional information on AACS, BD-ROM
Mark, BD+, or this product, please contact an
authorized Customer Service Center.
yy Many BD-ROM/DVD discs are encoded with
copy protection. Because of this, you should only
connect your player directly to your TV, not to a
VCR. Connecting to a VCR results in a distorted
picture from copy-protected discs.
yy This product incorporates copyright protection
technology that is protected by U.S. patents
and other intellectual property rights. Use of
this copyright protection technology must be
authorized by Rovi Corporation, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
yy Under the U.S. Copyright laws and Copyright
laws of other countries, unauthorized recording,
use, display, distribution, or revision of television
programs, videotapes, BD-ROM discs, DVDs, CDs
and other materials may subject you to civil and/or
criminal liability.
>>Caution
yy Watching a 3D content for a long period time
may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing content in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
1
Getting Started
How to Safely remove the batteries or the
battery pack from the equipment: To Remove the
old batteries or battery pack, follow the assembly
steps in reverse order. To prevent contamination of
the environment and bring on possible threat to
human and/or animal health, the old batteries or the
battery pack must be put in an appropriate container
at designated collection points. Do not dispose
of batteries or battery pack together with other
waste. It is recommended that you use local, free
reimbursement systems batteries or battery packs,
(may not be available in your area). The batteries or
the battery pack should not be exposed to excessive
heat such as sunshine, fire or the like.
3
4
Table of Contents
Table of Contents
1
Getting Started
2
6
6
Safety Information
Introduction
– Playable Discs and symbols used in this
manual
– About the “7” Symbol Display
– Regional Code
Remote Control
Front Panel
Rear Panel
7
7
8
9
9
2Connecting
10
11
11
11
12
12
13
14
14
14
Connecting to Your TV
– About HDR (High Dynamic Range)
– What is SIMPLINK?
– Resolution Setting
Connecting to an Amplifier
– Connecting to an Amplifier via HDMI Output
– Connecting to an Amplifier via Digital Audio
Output
Connecting to your Home Network
– Wired network connection
– Wired Network Setup
3
System Setting
17 Initial Setup
18Settings
18 – Adjust the Setup Settings
18 – [NETWORK] Menu
19 – [DISPLAY] Menu
21 – [LANGUAGE] Menu
21 – [AUDIO] Menu
23 – [LOCK] Menu
24 – [OTHERS] Menu
4Operating
25
25
25
25
26
26
27
29
29
29
29
30
30
31
31
32
33
33
33
33
34
34
34
34
35
35
36
36
36
37
37
38
38
Home Menu Display
– Using [HOME] menu
Playing the Linked Devices
– Playing a disc
– Playing Blu-ray 3D disc
– Playing a file on disc/USB device
– Playing a file on Android device
General Playback
– Basic operations for video and audio content
– Basic operations for photo content
– Using the disc menu
– Resume playback
– Last Scene Memory
On-Screen Display
– To control video playback
– To control photo view
Advanced Playback
– Repeat playback
– Repeating a specific portion
– Playing from selected time
– Selecting a subtitle language
– Hearing a different audio
– Watching from a different angle
– Changing the TV Aspect Ratio
– Changing subtitle Code Page
– Changing the Picture Mode
– Viewing content information
– Changing content list view
– Selecting a subtitle file
– Listening to music during slide show
– Playing file encoded in 3D
Advanced Features
– Enjoying BD-Live™
Table of Contents
5
5Troubleshooting
39
39
40
41
41
41
Troubleshooting
– General
– Network
– Picture
– Customer support
– OPEN SOURCE SOFTWARE NOTICE
INFORMATION
1
2
6Appendix
42
42
43
43
43
45
45
47
48
48
49
50
51
52
54
55
55
55
Controlling a TV with the Supplied Remote
Control
– Setting up the remote to control your TV
Network Software Update
– Network update notification
– Software update
Additional Information
– File requirement
– AVCHD (Advanced Video Codec High
Definition)
– Certain system requirements
– Compatibility notes
Audio Output Specifications
Area Code List
Language Code List
Trademarks and Licenses
Specifications
Maintenance
– Handling the unit
– Notes on discs
Some of the content in this manual may differ from your player depending on the software of the
player or your service provider.
3
4
5
6
6
Getting Started
Introduction
1
Playable Discs and symbols used in this manual
Getting Started
Media/Term
Logo
Symbol
Description
yy Ultra HD BD-ROM format.
e
Blu-ray
yy Discs such as movies that can be purchased or
rented.
yy “Blu-ray 3D” discs and “Blu-ray 3D ONLY” discs.
yy BD-R/RE discs that are recorded in BDAV format.
y
u
i
r
DVD-ROM
yy BD-R/RE discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
yy Discs such as movies that can be purchased or
rented.
yy Movie mode and finalized only
yy Supports the dual layer disc also
DVD-R
DVD-RW
DVD+R
DVD+RW
(8 cm, 12 cm)
DVD-RW (VR)
(8 cm, 12 cm)
Audio CD
(8 cm, 12 cm)
CD-R/RW
(8 cm, 12 cm)
Note
–
Caution
–
o
Finalized AVCHD format
y
u
i
yy DVD±R/RW discs that contain Movie, Music or
Photo files.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
r
VR mode and finalized only
t
Audio CD
y
u
i
yy CD-R/RW discs that contain Movie, Music or
Photo files.
,
>
Indicates special notes and operating features.
yy ISO 9660+JOLIET, UDF and UDF Bridge format
Indicates cautions for preventing possible damages
from abuse.
Getting Started
,,Note
yy Depending on the conditions of the recording
equipment or the CD-R/RW (or DVD±R/RW)
disc itself, some CD-R/RW (or DVD±R/RW)
discs cannot be played on the unit.
yy BD-R/RE, DVD±R/RW and CD-R/RW discs
recorded using a personal computer or a
DVD or CD Recorder may not play if the
disc is damaged or dirty, or if there is dirt or
condensation on the player’s lens.
yy If you record a disc using a personal computer,
even if it is recorded in a compatible format,
there are cases in which it may not play
because of the settings of the application
software used to create the disc. (Check with
the software publisher for more detailed
information.)
yy This player requires discs and recordings to
meet certain technical standards in order to
achieve optimal playback quality.
yy Pre-recorded DVDs are automatically set to
these standards. There are many different
types of recordable disc formats (including
CD-R containing MP3 or WMA files) and
these require certain pre-existing conditions
to ensure compatible playback.
yy Customers should note that permission
is required in order to download MP3 /
WMA files and music from the Internet.
Our company has no right to grant such
permission. Permission should always be
sought from the copyright owner.
yy You have to set the disc format option
to [Mastered] in order to make the discs
compatible with the LG players when
formatting rewritable discs. When setting the
option to Live System, you cannot use it on
LG player. (Mastered/Live File System : Disc
format system for windows Vista)
About the “7” Symbol Display
“7” may appear on your TV display during operation
and indicates that the function explained in this
owner’s manual is not available on that specific
media.
Regional Code
This unit has a regional code printed on the rear of
the unit. This unit can play only BD-ROM or DVD discs
labelled same as the rear of the unit or “ALL”.
1
Getting Started
yy Depending on the recording software & the
finalization, some recorded discs (CD-R/RW,
DVD±R/RW, BD-R/RE) may not be playable.
7
8
Getting Started
Remote Control
1
• • • • • • • • • a• • • • • • • •
• • • • • • • • • d• • • • • • • •
Getting Started
1 (POWER): Switches the player
ON or OFF.
B (OPEN/CLOSE): Opens and
closes the disc tray.
Colored (R, G, Y, B) buttons: Use
to navigate BD-ROM menus. They
are also used as shortcut buttons
for specific menus.
0-9 numerical buttons: Selects
numbered options in a menu.
TV Control Buttons: See page
42.
TITLE/POPUP: Displays the DVD
title menu or BD-ROM’s pop-up
menu, if available.
REPEAT (h): Repeats a desired
section or sequence.
• • • • • • • • • b• • • • • • • •
c/v (SCAN): Searches
backward or forward.
C/V (SKIP): Goes to the
next or previous chapter / track
/ file.
Battery Installation
M (PAUSE): Pauses playback.
d (PLAY): Starts playback.
Z (STOP): Stops playback.
• • • • • • • • • c• • • • • • • •
HOME (
[Home].
Remove the battery cover on the
rear of the remote control, and
insert a R03 (size AAA) battery
with 4 and 5 matched correctly.
): Displays or exits the
INFO/MENU (m): Displays or
exits On-Screen Display.
Direction buttons (w/s/
a/d): Selects an option in the
menu.
ENTER (b): Acknowledges menu
selection.
BACK (1): Exits the menu or
returns to the previous screen.
DISC MENU: Accesses menu on
a disc.
Getting Started
9
Front Panel
1
Getting Started
a
b
a Disc Tray
cPower Indicator
b R (Open/Close)
Disc Tray Open / Close
d USB Port
Connect a USB device.
c
T (Play/Pause)
Starts / Pauses playback
I (Stop)
Stops playback
1 (Standby)
Power On / Off
Rear Panel
d
a b
a LAN port
Connect to Internet.
b HDMI OUT TO TV
Connect to TV.
c
c OPTICAL AUDIO OUT
Connect to digital audio device.
d
10 Connecting
Connecting to Your TV
If you have a HDMI TV or monitor, you can connect it
to this player using a HDMI cable (Type A, High Speed
HDMI™ Cable). Connect the HDMI (HDMI OUT TO
TV) jack on the player to the HDMI jack on a HDMI
compatible TV or monitor.
Additional Information for HDMI
yy When you connect a HDMI or DVI compatible
device make sure of the following:
-- Try switching off the HDMI/DVI device and this
player. Next, switch on the HDMI/DVI device
and leave it for around 30 seconds, then
switch on this player.
-- The connected device’s video input is set
correctly for this unit.
2
Connecting
Rear of the unit
-- The connected device is compatible with
720 x 576p (or 480p), 1280 x 720p,
1920 x 1080i, 1920 x 1080p, 3840 x 2160P
video input
yy Not all HDCP-compatible HDMI or DVI devices will
work with this player.
-- The picture will not be displayed properly with
non-HDCP device.
,,Note
yy If a connected HDMI device does not accept
the audio output of the player, the HDMI
device’s audio sound may be distorted or may
not output.
HDMI cable
yy When you use HDMI connection, you can
change the resolution for the HDMI output.
(Refer to “Resolution Setting” on page 11)
TV
Set the TV’s source to HDMI (Refer to TV’s Owner’s
manual).
,,Note
Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
yy Select the type of video output from the
HDMI OUT jack using [HDMI Color Setting]
option on the [Settings] menu (see page
20).
yy Changing the resolution when the connection
has already been established may result in
malfunctions. To solve the problem, turn off
the player and then turn it on again.
yy When the HDMI connection with HDCP is not
verified, TV screen is changed to black screen.
In this case, check the HDMI connection, or
disconnect the HDMI cable.
yy If there are noises or lines on the screen,
please check the HDMI cable (length is
generally limited to 4.5 m).
Connecting 11
About HDR (High Dynamic
Range)
This player supports the HDR function. High Dynamic
Range is a technique used in imaging to reproduce a
greater dynamic range of luminosity than is possible
with conventional imaging devices.
yy Make sure your TV supports the HDR function.
yy Activate the HDR related function on your TV’s
menu. For further information, refer to the TV’s
user manual.
5.Use w/s to select the desired resolution then
press ENTER (b) to confirm your selection.
,,Note
yy If your TV does not accept the resolution you
have set on the player, you can set resolution
to 576p as follows:
1.Press B to open the disc tray.
What is SIMPLINK?
Some functions of this unit are controlled by the
TV’s remote control when this unit and LG TV’s with
SIMPLINK are connected through HDMI connection.
Controllable functions by LG TV’s remote control;
Play, Pause, Scan, Skip, Stop, Power Off, etc.
Refer to the TV owner’s manual for the details of
SIMPLINK function.
LG TV’s with SIMPLINK function has the logo as
shown above.
,,Note
Depending on the disc type or playing status,
some SIMPLINK operation may differ from your
purpose or not work.
Resolution Setting
The player provides several output resolutions for
HDMI OUT jack. You can change the resolution using
[Settings] menu.
1. Press HOME (
).
2. Use a/d to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
3. Use w/s to select [DISPLAY] option then press
d to move to the second level.
4. Use w/s to select the [Resolution] option then
press ENTER (b) to move to the third level.
2.Press Z (STOP) for more than 5 seconds.
yy If you select a resolution manually and then
connect the HDMI jack to TV and your TV
does not accept it, the resolution setting is
set to [Auto].
yy If you select a resolution that your TV does
not accept, the warning message will appear.
After resolution change, if you cannot see
the screen, please wait 20 seconds and the
resolution will automatically revert back to
the previous resolution.
yy The 1080p or 2160p video output frame
rate may be automatically set to either 24 Hz
or 50 Hz depending both on the capability
and preference of the connected TV and
based on the native video frame rate of the
content on the BD-ROM disc.
2
Connecting
yy Connect an HDMI cable (Type A, High Speed
HDMI™ Cable) between the player’s HDMI output
and TV’s HDMI input.
12 Connecting
Connecting to an
Amplifier
Make one of the following connections, depending on
the capabilities of your existing equipment.
yy HDMI Audio connection (page 12)
Connecting to an Amplifier via
HDMI Output
Connect the player’s HDMI OUT (HDMI OUT TO TV)
jack to the corresponding in jack on your amplifier
using a HDMI cable.
Rear of the unit
yy Digital Audio connection (page 13)
2
Connecting
Since many factors affect the type of audio output,
see “Audio Output Specifications” for details (page
49).
About Digital Multi-channel sound
A digital multi-channel connection provides the best
sound quality. For this, you need a multi-channel
Audio/Video Receiver that supports one or more of
the audio formats supported by your player. Check
the logos on the front of the Audio/Video receiver
and the manual. (PCM Stereo, PCM Multi-Ch, Dolby
Digital, Dolby Digital Plus, Dolby TrueHD, DTS and/or
DTS-HD)
HDMI cable
Receiver/Amplifier
HDMI
cable
TV
Connect the amplifier’s HDMI output jack to HDMI
input jack on your TV using a HDMI cable if your
amplifier has HDMI output jack. (Refer to amplifier’s
owner’s manual.)
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 21)
,,Note
Depending on the supported resolution of the
TV or Amplifier, the picture may not be output.
Connecting 13
Connecting to an Amplifier via
Digital Audio Output
Connect the player’s OPTICAL AUDIO OUT jack to the
corresponding in jack on your amplifier using a optical
digital audio cable.
Rear of the unit
2
Connecting
Optical cable
Receiver/Amplifier
You will need to activate the player’s digital output.
(See “[AUDIO] Menu” on page 21.)
14 Connecting
Connecting to your
Home Network
2
Broadband
service
This player can be connected to a local area network
(LAN) via the LAN port on the rear panel.
By connecting the unit to a broadband home
network, you have access to services such as
software updates, and BD-Live interactivity.
Router
Connecting
Wired network connection
Using a wired network provides the best
performance, because the attached devices connect
directly to the network and are not subject to radio
frequency interference.
Please refer to the documentation for your network
device for further instructions.
Connect the player’s LAN port to the corresponding
port on your Modem or Router using a commercially
available LAN or Ethernet cable.
,,Note
yy When plugging or unplugging the LAN cable,
hold the plug portion of the cable. When
unplugging, do not pull on the LAN cable but
unplug while pressing down on the lock.
yy Do not connect a modular phone cable to the
LAN port.
yy Since there are various connection
configurations, please follow the
specifications of your telecommunication
carrier or internet service provider.
Rear of the unit
Wired Network Setup
If there is a DHCP server on the local area network
(LAN) via wired connection, this player will
automatically be allocated an IP address. After
making the physical connection, a small number of
home networks may require the player’s network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
Connecting 15
1. Select [Connection Setting] option in the
[Settings] menu then press ENTER (b).
2. Select [Next] and press ENTER (b) to apply
network settings.
2. Read the preparations for the network settings
and then press ENTER (b) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
Advanced Setting
If you want to set the network settings manually, use
w/s to select [Advanced Setting] on the [Network
Setting] menu and press ENTER (b).
1.Use w/s/a/d to select the IP mode between
[Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
,,Note
If there is no DHCP server on the network and
you want to set the IP address manually, select
[Static] then set [IP Address], [Subnet Mask],
[Gateway] and [DNS Server] using
w/s/a/d and numerical buttons.
3. Press ENTER (b) while [OK] is highlighted to
finish the wired network settings.
2
Connecting
Network connection status is displayed on the
screen.
16 Connecting
Notes on Network Connection
yy Many network connection problems during set
up can often be fixed by re-setting the router or
modem. After connecting the player to the home
network, quickly power off and/or disconnect the
power cable of the home network router or cable
modem. Then power on and/or connect the power
cable again.
2
Connecting
yy Depending on the internet service provider (ISP),
the number of devices that can receive internet
service may be limited by the applicable terms of
service. For details, contact your ISP.
yy Our company is not responsible for any
malfunction of the player and/or the internet
connection feature due to communication errors/
malfunctions associated with your broadband
internet connection, or other connected
equipment.
yy The features of BD-ROM discs made available
through the Internet Connection feature are not
created or provided by our company, and our
company is not responsible for their functionality
or continued availability. Some disc related
material available by the Internet Connection may
not be compatible with this player. If you have
questions about such content, please contact the
producer of the disc.
yy Some internet contents may require a higher
bandwidth connection.
yy Even if the player is properly connected and
configured, some internet contents may not
operate properly because of internet congestion,
the quality or bandwidth of your internet service,
or problems at the provider of the content.
yy Some internet connection operations may not
be possible due to certain restrictions set by the
Internet service provider (ISP) supplying your
broadband Internet connection.
yy Any fees charged by an ISP including, without
limitation, connection charges are your
responsibility.
yy A 10 Base-T or 100 Base-TX LAN port is required
for wired connection to this player. If your internet
service does not allow for such a connection, you
will not be able to connect the player.
yy You must use a Router to use xDSL service.
yy A DSL modem is required to use DSL service and
a cable modem is required to use cable modem
service. Depending on the access method of and
subscriber agreement with your ISP, you may not
be able to use the internet connection feature
contained in this player or you may be limited to
the number of devices you can connect at the
same time. (If your ISP limits subscription to one
device, this player may not be allowed to connect
when a PC is already connected.)
System Setting 17
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
4. Select [Next] and press ENTER (b).
5. Check all the settings that you have set in the
previous steps.
1.Press 1 (POWER).
The initial setup wizard appears on the screen.
2.Use w/s/a/d to select a display language
and press ENTER (b).
Press ENTER (b) while [Finish] is highlighted
to finish the initial setup settings. If there is any
settings to be changed, use w/s/a/d to
select 1 and press ENTER (b).
3
If a wired network is connected, the network
connection setting will automatically be finished.
System Setting
3. After checking the Terms of Service, select
[Agree] to use the Premium Service and SW
Updates.
Read and prepare the preparations for the
network settings and then press ENTER (b)
while [Start] is highlighted.
18 System Setting
Settings
[NETWORK] Menu
The [NETWORK] settings are needed to use the
software update, and BD-Live.
Adjust the Setup Settings
You can change the settings of the player in the
[Settings] menu.
1. Press HOME (
).
Connection Setting
If your home network environment is ready
to connect the player, the player needs to be
set the wired network connection for network
communication. (See “Connecting to your Home
Network” on page 14.)
Connection Status
3
System Setting
2.Use a/d to select the [Settings] and press
ENTER (b). The [Settings] menu appears.
If you want to check the network status on this
player, select the [Connection Status] options and
press ENTER (b) to check whether a connection to
the network and the internet have been established.
BD-LIVE connection
You can restrict Internet access when BD-Live
functions are used.
[Permitted]
Internet access is permitted for all BD-Live
contents.
3. Use w/s to select the first setup option, and
press ENTER (b) to move to the second level.
[Partially permitted]
Internet access is permitted only for BD-Live
contents which have content owner certificates.
Internet access and AACS Online functions are
prohibited for all BD-Live contents without a
certificate.
[Prohibited]
4.Use w/s to select a second setup option, and
press ENTER (b) to move to the third level.
5.Use w/s to select a desired setting, and press
ENTER (b) to confirm your selection.
Internet access is prohibited for all BD-Live
contents.
System Setting 19
[DISPLAY] Menu
TV Aspect Ratio
Select a TV aspect ratio option according to your TV
type.
[4:3 Letter Box]
Resolution
Sets the output resolution of the HDMI video signal.
Refer to page 11 for details about the resolution
setting.
[Auto]
Select when a standard 4:3 TV is connected.
Displays theatrical images with masking bars
above and below the picture.
If the HDMI OUT jack is connected to
TVs providing display information (EDID),
automatically selects the resolution best suited
to the connected TV.
[4:3 Pan Scan]
[576p]
Select when a standard 4:3 TV is connected.
Displays pictures cropped to fill your TV screen.
Both sides of the picture are cut off.
Outputs 576 lines of progressive video.
[16:9 Original]
Outputs 720 lines of progressive video.
[1080i]
Outputs 1080 lines of interlaced video.
[1080p]
Outputs 1080 lines of progressive video.
[16:9 Full]
[2160p]
Select when a 16:9 wide TV is connected. The
4:3 picture is adjusted horizontally (in a linear
proportion) to fill the entire screen.
Outputs 2160 lines of progressive video.
,,Note
You cannot select [4:3 Letter Box] and
[4:3 Pan Scan] option when the resolution is set
to higher than 720p.
3
System Setting
Select when a 16:9 wide TV is connected. The
4:3 picture is displayed with an original 4:3
aspect ratio, with black bars appearing at the left
and right sides.
[720p]
20 System Setting
Display Mode
3D Mode
When the resolution is set to 1080p or 2160p,
select [24 Hz] for smooth presentation of film
material (1080p or 2160p/24 Hz) with a HDMIequipped display compatible with 1080p or
2160p/24 Hz input.
Select the type of output mode for Blu-ray 3D disc
playback. (This function is activated only when 3D TV
is connected.)
,,Note
yy When you select [24 Hz], you may
experience some picture disturbance when
the video switches video and film material. In
this case, select [50 Hz].
3
System Setting
yy Even when [Display Mode] is set to [24 Hz],
if your TV is not compatible with 1080p or
2160p/24 Hz, the actual frame frequency of
the video output will be 50 Hz to match the
video source format.
HDMI Color Setting
Select the type of output from the HDMI OUT jack.
For this setting, please refer to the manuals of your
display device.
[YCbCr]
Select when connecting to a HDMI display
device.
[RGB]
Select when connecting to a DVI display device.
[On]
Blu-ray 3D disc playback will output as 3D mode.
[Off]
Blu-ray 3D disc playback will output as 2D mode
like a normal BD-ROM disc playback.
Home Menu Guide
This function allows you to display or delete the
guide bubble on the Home Menu. Set this option to
[On] for displaying guide.
System Setting 21
[LANGUAGE] Menu
[AUDIO] Menu
Display Menu
Each disc has a variety of audio output options. Set
the player’s Audio options according to the type of
audio system you use.
Select a language for the [Settings] menu and onscreen display.
Disc Menu/Disc Audio/
Disc Subtitle
Select the language you prefer for the audio track
(disc audio), subtitles, and the disc menu.
[Original]
Refers to the original language in which the disc
was recorded.
[Other]
[Off] (Disc Subtitle only)
Turn off Subtitle.
,,Note
Depending on the disc, your language setting
may not work.
Digital Output
[Auto]
Select if you connect this unit’s DIGITAL AUDIO
OUT and HDMI OUT jack to a device with LPCM,
Dolby Digital, Dolby Digital Plus, Dolby TrueHD,
DTS and DTS-HD decoder.
[PCM]
Select if you connect this unit’s HDMI OUT
jack to a device with digital decoder or DIGITAL
AUDIO OUT jack to a device with two channel
digital stereo decoder.
[DTS Re-Encode]
Select if you connect this unit’s HDMI OUT or
DIGITAL AUDIO OUT jack to a device with DTS
decoder.
,,Note
yy When [Digital Output] option is set to
[Auto], the audio may output as bitstream.
If the Bitstream information is not detected
from HDMI device with EDID, the audio may
output as PCM.
yy If the [Digital Output] option is set to [DTS
Re-Encode], the DTS Re-Encode audio is
outputted for BD-ROM discs with secondary
audio and the original audio is output for the
other discs (like [Auto]).
3
System Setting
Press ENTER (b) to select another language.
Use number buttons then press ENTER (b)
to enter the corresponding 4-digit number
according to the language code list on page
51.
,,Note
Since many factors affect the type of audio
output, see “Audio Output Specifications” on
page 49 for details.
22 System Setting
Sampling Freq.
(Digital Audio Output)
[48 kHz]
Select this if your A/V Receiver or Amplifier
is not capable of handling 192 kHz and 96
kHz signal. When this choice is made, this unit
automatically converts any 192 kHz and 96 kHz
signals to 48 kHz so your system can decode
them.
[96 kHz]
3
Select this if your A/V Receiver or Amplifier is
not capable of handling 192 kHz signals. When
this choice is made, this unit
automatically converts any 192 kHz signals to
96 kHz so your system can decode them.
System Setting
[192 kHz]
Select this if your A/V Receiver or Amplifier is
capable of handling 192 kHz signals.
Check the documentation for your A/V Receiver or
Amplifier to verify its capabilities.
DRC (Dynamic Range Control)
This function allows you to listen to a movie at a
lower volume without losing clarity of sound.
[Auto]
The dynamic range of the Dolby TrueHD audio
output is specified by itself.
And the dynamic range of the Dolby Digital and
Dolby Digital Plus are operated as same as the
[On] mode.
[On]
Compress the dynamic range of the Dolby
Digital, Dolby Digital Plus or Dolby TrueHD audio
output.
[Off]
Turns off this function.
,,Note
The DRC setting can be changed only when a
disc is not inserted or the unit is in complete
stop mode.
System Setting 23
[LOCK] Menu
The [LOCK] settings affect only BD-ROM and DVD
playback.
To access the any features in [LOCK] settings, you
must enter the 4-digit security code you have
created.
If you have not entered a password yet, you are
prompted to do so. Enter a 4-digit password twice,
and press ENTER (b) to create a new password.
Password
You can create or change the password.
[None]
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select [Unlock], parental control is not
active and the disc plays in full.
Blu-ray Disc Rating
Set an age limit of BD-ROM play. Use number
buttons to input an age limit for BD-ROM viewing.
[255]
[Change]
All BD-ROM can be played.
Enter the current password and press
ENTER (b). Enter a 4-digit password twice, and
press ENTER (b) to create a new password.
[0-254]
If you forget your password
If you forget your password, you can clear it using the
following steps:
1. Remove any disc that might be in the player.
2. Highlight [Password] option in the [Settings]
menu.
3. Use Number buttons to enter “210499”.
The password is cleared.
,,Note
If you make a mistake before pressing
ENTER (b), press a. Then input the correct
password.
Prohibits play of BD-ROM with corresponding
ratings recorded on them.
,,Note
The [Blu-ray Disc Rating] will be applied only for
the Blu-ray disc that containing the Advanced
Rating Control.
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list on
page 50.
3
System Setting
Enter a 4-digit password twice, and press
ENTER (b) to create a new password.
DVD Rating
Blocks playback of rated DVD based on their content.
(Not all discs are rated.)
24 System Setting
[OTHERS] Menu
Auto Power Off
The screen saver appears when you leave the player
in Stop mode for about 5 minutes. If you set this
option to [On], the unit automatically turns off within
15 minutes since the Screen Saver is displayed. Set
this option to [Off] to leave the screen saver until the
unit is operated by the user.
Initialize
[Factory Set]
3
You can reset the player to its original factory
settings.
System Setting
[Blu-ray Storage Clear]
Initializes the BD-Live contents from the
connected USB storage.
,,Note
If you reset the player to its original factory
settings using [Factory Set] option, you have to
set all the activation for the on-line services and
network settings again.
Software
[Information]
Displays the current software version.
[OSS Notice]
LGE Open Source Software Notice is displayed.
[Update]
You can update the software by connecting the
unit directly to the software update server (see
page 43).
User Agreements
Privacy Policy for Blu-ray Disc™ Player is displayed.
To use the Premium Service and SW Updates, select
[Agree].
Operating 25
Home Menu Display
Using [HOME] menu
The home menu appears when you press HOME ( ).
Use a/d to select a category and press ENTER (b).
Playing the Linked
Devices
Playing a disc
erot
1.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
2.Press B (OPEN/CLOSE) to close the disc tray.
For the most Audio CD, BD-ROM and
DVD-ROM discs, playback starts automatically.
3. Press HOME (
a [Movie] - Plays video content.
b [Photo] - Plays photo content.
c [Music] - Plays audio content.
d [Settings] - Adjusts the system settings.
).
4. Select [Movie] or [Music], and select disc icon.
,,Note
yy Depending on the BD-ROM titles, a USB
device connection may be needed for the
proper playback.
yy Unfinalized DVD-VR format discs may not be
played in this player.
yy Some DVD-VR discs are made with CPRM
data by DVD RECORDER. This unit cannot
support these kinds of discs.
Preparation
In order to playback UHD Blu-ray title, you need
to:
yy Check your TV is UHD capable and has HDMI
input(s).
yy Check whether the BD-ROM title is the UHD
Blu-ray disc or not.
yy Connect an HDMI cable (Type A, High Speed
HDMI™ Cable) between the player’s HDMI
output and TV’s HDMI input.
4
Operating
yy Playback functions described in this manual
are not always available in every files and
media. Some functions can be restricted
depending on many factors.
26 Operating
Playing Blu-ray 3D disc
e
Playing a file on disc/USB device
yui
This player can play the Blu-ray 3D discs which
contains separate views for the left and right eyes.
This player can play video, audio and photo files
contained in the disc or USB device.
Preparation
1. Insert a data disc on the tray or connect a USB
device.
In order to playback Blu-ray 3D title in
stereoscopic 3D mode, you need to:
yy Check your TV is 3D capable and has HDMI
input(s).
yy W
ear 3D glasses to enjoy the 3D experience
if it is necessary.
yy Check whether the BD-ROM title is the Bluray 3D disc or not.
yy Connect an HDMI cable (Type A, High Speed
HDMI™ Cable) between the player’s HDMI
output and TV’s HDMI input.
4
Operating
1. Press HOME ( ), and set the [3D Mode] option
on the [Settings] menu to [On] (page 20).
2.Press B (OPEN/CLOSE), and place a disc on the
disc tray.
3. Press B (OPEN/CLOSE) to close the disc tray.
The playback starts automatically.
4. Refer to the owner’s manual of your 3D-ready TV
for the further instruction.
You may need to adjust the display settings and
focus on your TV’s setting for the improved 3D
effect.
When you connect the USB device on the HOME
menu, the player plays an audio file contained in the
USB storage device automatically. If the USB storage
device is containing various types of files, a menu for
the file type selection will appear.
File loading may take few minutes depending on the
number of content stored in the USB storage device.
Press ENTER (b) while [Cancel] is selected to stop
loading.
2. Press HOME (
).
3. Select [Movie], [Photo] or [Music] using a/d,
and press s.
4. Select Disc or USB and press ENTER (b).
>>Caution
yy Watching a 3D content for a long period time
may cause dizziness or tiredness.
yy It is not recommended to watch a movie
in 3D mode for infirm, child and pregnant
woman.
yy If you are experiencing headache, tiredness
or dizziness while viewing contents in 3D, it is
strongly recommended to stop the playback
and rest until you feel normal.
a Displays all linked devices.
b Displays video, photo or audio content.
c Displays the file or folder on linked device.
5. Select a file using w/s/a/d, and press d
(PLAY) or ENTER (b) to play the file.
Operating 27
Notes on USB device
yy This player supports USB flash drive/external HDD
formatted in FAT32 and NTFS when accessing
files (music, photo, movie). However, for BD-Live,
use the USB flash drive / external HDD formatted
in FAT32.
yy This unit can support up to 4 partitions of the
USB device.
yy Do not extract the USB device during operation
(play, etc.).
Playing a file on Android device
yui
This player can play video, audio and photo files
contained in Android device.
1. Connect Android device to the unit with USB
cable. Make sure that MTP is activated on
Android device.
If the Android device is locked, unlock it and
connect it.
yy A USB device which requires additional program
installation when you have connected it to a
computer, is not supported.
yy USB device: USB device that supports USB1.1 and
USB2.0.
yy Video, audio and photo files can be played. For
details of playing each file type, refer to the
relevant pages.
yy Regular back up is recommended to prevent data
loss.
).
4. Select [MTP] using a/d and press ENTER (b).
yy Some USB device may not work with this unit.
yy Some digital cameras and mobile phones are not
supported.
yy USB Port of the unit cannot be connected to PC.
The unit cannot be used as a storage device.
File loading may take few minutes depending on the
number of content stored in Android device.
5. Select a file using w/s/a/d, and press d
(PLAY) or ENTER (b) to play the file.
4
Operating
yy If you use a USB extension cable, USB HUB or
USB Multi-reader, the USB device may not be
recognized.
2. Press HOME (
3. Select [Movie], [Photo] or [Music] using a/d,
and press s.
28 Operating
Notes on Connecting Android device
yy This unit can support only MTP (Media Transfer
Protocol) Android (4.0 or later is recommended)
devices.
yy Do not extract Android device during operation
(play, etc.).
yy Video, audio and photo files can be played. For
details of playing each file type, refer to the
relevant pages.
yy Regular back up is recommended to prevent data
loss.
yy If you use a USB extension cable, USB HUB or
USB Multi-reader, Android device may not be
recognized.
yy Some Android devices may not work with this unit.
yy When you use MTP, playing some music, photo,
movie, or subtitle files may not work depending on
Android device.
4
Operating
Operating 29
General Playback
Basic operations for photo
content
Basic operations for video and
audio content
To play a slide show
To stop playback
To stop a slide show
Press d (PLAY) to start slide show.
Press Z (STOP) during playback.
Press Z (STOP) while slide show.
To pause playback
To pause a slide show
Press M (PAUSE) during playback.
Press d (PLAY) to resume playback.
Press M (PAUSE) while slide show.
Press d (PLAY) to re-start the slide show.
To play frame-by-frame (Video)
To skip to the next/previous photo
Press M (PAUSE) during video playback.
Press M (PAUSE) repeatedly to play Frame-by-Frame
playback.
To scan forward or backward
You can change the various playback speeds by
pressing c or v repeatedly.
To slow down the playing speed
(Video)
While the playback is paused, press v repeatedly
to play various speeds of slow motion.
To skip to the next/previous
chapter/track/file
During playback, press C or V to go to the
next chapter/track/file or to return to the beginning
of the current chapter/track/file.
Press C twice briefly to step back to the previous
chapter/track/file.
Using the disc menu
ero
To display the disc menu
The menu screen may be displayed first after loading
a disc which contains a menu. If you want to display
the disc menu during playback, press DISC MENU.
Use w/s/a/d buttons to navigate through
menu items.
To display the Pop-up menu
Some BD-ROM discs contain Pop-up menu that
appears during playback.
Press TITLE/POPUP during playback, and use w/s/
a/d buttons to navigate through menu items.
4
Operating
Press c or v to play fast forward or fast
reverse during playback.
While viewing a photo in full screen, press a or d to
go to the previous or next photo.
30 Operating
Resume playback
eroyt
u
The unit records the point where you pressed the Z
(STOP) depending on the disc.
If “MZ (Resume Stop)” appears on the screen briefly,
press d (PLAY) to resume playback (from the scene
point).
If you press Z (STOP) twice or unload the disc,
“Z(Complete Stop)” appears on the screen. The unit
will clear the stopped point.
,,Note
4
Operating
yy The resume point may be cleared when a
button is pressed (for example; 1 (POWER),
B (OPEN/CLOSE), etc).
yy On BD-ROM discs with BD-J, the resume
playback function does not work.
yy If you press Z (STOP) once during BD-ROM
interactive title playback, the unit will be in
Complete Stop mode.
Last Scene Memory
er
This unit memorizes the last scene from the last disc
that is viewed. The last scene remains in memory
even if you remove the disc from the unit or switch
off the unit. If you load a disc that has the scene
memorized, the scene is automatically recalled.
,,Note
yy Last Scene Memory function for a previous
disc is erased once a different disc is played.
yy This function may not work depending on
the disc.
yy On BD-ROM discs with BD-J, the last scene
memory function does not work.
yy This unit does not memorize settings of
a disc if you switch off the unit before
commencing to play it.
Operating 31
On-Screen Display
Displaying content information onscreen
You can display and adjust various information and
settings about the content.
eroy
To control video playback
eroy
2. Select an [Option] using a/d, and press
ENTER (b).
1. During playback, press INFO/MENU (m).
You can control playback and set options while
watching videos.
During playback, press INFO/MENU (m).
4
e [Repeat] - Repeats a desired section or
sequence. (page 33)
f [3D] - Adjusts the 3D setting. (page 37)
a Title – Current title number/total number of
titles
b Chapter – Current chapter number/total
number of chapters
c Time – Elapsed playing time/total playback time
d Audio – Selected audio language or channel
e Subtitle – Selected subtitle.
f Angle – Selected angle/total number of angles
g TV Aspect Ratio – Selected TV aspect ratio
h Picture Mode – Selected picture mode
Operating
a Progress bar - Displays the current position
and total playing time.
b [Disc Menu] - Accesses menu on a disc.
c [Title/Popup] - Displays the DVD title menu or
BD-ROM’s pop-up menu, if available.
d [Option] - Displays playback information.
32 Operating
,,Note
yy If no button is pressed for a few seconds, the
on-screen display disappears.
yy A title number cannot be selected on some
discs.
yy Available items may differ depending on discs
or titles.
Setting the slide show option
You can use various options during viewing a photo
in full screen.
1. While viewing pictures, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
ENTER (b).
yy If an interactive Blu-ray Disc is playing back,
some setting information is displayed on the
screen but prohibited to be changed.
To control photo view
Controls playback and sets options while viewing
pictures in full screen.
You can control playback and set options while
viewing pictures in full screen.
While viewing pictures, press INFO/MENU (m).
4
a [Speed] - Use a/d to select a delaying speed
between photos in a slide show.
Operating
b [Effect] - Use a/d to select a transition
effect between photos in a slide show.
c [Music Select] – Select the background music
for the slide show (page 37).
a [Slideshow] - Starts or pause slide show.
b [Music] - Select the background music for the
slide show
c [Option] - Displays slide show options.
d [Rotate] - Rotates the photo clockwise.
e [Zoom] - Displays the [Zoom] menu.
Operating 33
Advanced Playback
Repeating a specific portion
eroty
Repeat playback
erotu
y
This player can repeat a portion you have selected.
Blu-ray Disc / DVD / Video files
During playback, press REPEAT (h) to select a
desired repeat mode.
A-B – Selected portion will be repeated continually.
1. During playback, press REPEAT (h).
2. Select [A-B], and press ENTER (b).
3. Press ENTER (b) at the beginning of the portion
you wish to repeat.
4. Press ENTER (b) at the end of the portion. Your
selected portion will be repeated continually.
,,Note
Chapter – The current chapter will be played back
repeatedly. (BD / DVD only)
yy You cannot select a portion less than 3
seconds.
Title – The current title will be played back repeatedly.
yy This function may not work on some disc or
title.
All – All the titles or files will be played back
repeatedly. (Movie file only)
Off – Returns to normal playback.
Audio CDs/Audio files
– Selected portion will be repeated continually.
(Audio CD only)
– The current track or file will be played back
repeatedly.
– All the tracks or files will be played back
repeatedly.
– All the tracks or files will be played back
repeatedly in random order.
– The tracks or files will be played back in
random order.
,,Note
This function may not work on some disc or
title.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
ENTER (b).
3. Select the [Time] option and then input the
required start time in hours, minutes, and
seconds from left to right.
For example, to find a scene at 2 hours, 10
minutes, and 20 seconds, enter “21020”.
Press a/d to skip the playback 60 seconds
forward or backward.
4. Press ENTER (b) to start playback from selected
time.
,,Note
This function may not work on some disc or
titles.
4
Operating
During playback, press REPEAT (h) repeatedly to
select a desired repeat mode.
Playing from selected time
eroy
34 Operating
Selecting a subtitle language
eroy
Watching from a different angle
er
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
ENTER (b).
If the disc contains scenes recorded at different
camera angles, you can change to a different camera
angle during playback.
3. Use w/s to select the [Subtitle] option.
1. During playback, press INFO/MENU (m).
4.Use a/d to select desired subtitle language.
By pressing ENTER (b), you can set various
subtitle options.
5. Press BACK (1) to exit the On-Screen display.
,,Note
Some discs allow you to change subtitle
selections only via the disc menu. If this is the
case, press TITLE/POPUP or DISC MENU button
and choose the appropriate subtitle from the
selections on the disc menu.
4
2. Select an [Option] using a/d, and press
ENTER (b).
3. Use w/s to select the [Angle] option.
4.Use a/d to select desired angle.
5. Press BACK (1) to exit the On-Screen display.
Changing the TV Aspect Ratio
eoy
You can change the TV aspect ratio setting during
playback.
1. During playback, press INFO/MENU (m).
Operating
Hearing a different audio
eroy
2. Select an [Option] using a/d, and press
ENTER (b).
1. During playback, press INFO/MENU (m).
4.Use a/d to select desired option.
2. Select an [Option] using a/d, and press
ENTER (b).
3. Use w/s to select the [Audio] option.
4.Use a/d to select desired audio language,
audio track or audio channel.
5. Press BACK (1) to exit the On-Screen display.
,,Note
yy Some discs allow you to change audio
selections only via the disc menu. In this case,
press TITLE/POPUP or DISC MENU button
and choose the appropriate audio from the
selections on the disc menu.
yy Immediately after you have switched sound,
there may be a temporary discrepancy
between the display and actual sound.
yy On BD-ROM disc, the multi audio format
(5.1CH or 7.1CH) is displayed with [MultiCH]
in the on-screen display.
3. Use w/s to select the [TV Aspect Ratio] option.
5. Press BACK (1) to exit the On-Screen display.
,,Note
Even if you change the value of the [TV Aspect
Ratio] option in On-Screen display, the [TV
Aspect Ratio] option in the [Settings] menu is
not changed.
Operating 35
Changing subtitle Code Page
y
Changing the Picture Mode
eroy
If the subtitle is displayed in broken letter, you can
change the subtitle code page to view the subtitle
file properly.
You can change the [Picture mode] option during
playback.
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
ENTER (b).
2. Select an [Option] using a/d, and press
ENTER (b).
3. Use w/s to select the [Code Page] option.
4.Use a/d to select desired code option.
1. During playback, press INFO/MENU (m).
3. Use w/s to select the [Picture Mode] option.
4.Use a/d to select desired option.
5. Press BACK (1) to exit the On-Screen display.
Setting the [User setting] option
1. During playback, press INFO/MENU (m).
2. Select an [Option] using a/d, and press
ENTER (b).
3. Use w/s to select the [Picture Mode] option.
4.Use a/d to select the [User setting] option,
and press ENTER (b).
4
Operating
5. Press BACK (1) to exit the On-Screen display.
5.Use w/s/a/d to adjust the [Picture Mode]
options.
Select [Default] option then press ENTER (b) to
reset the all video adjustments.
6.Use w/s/a/d to select the [Close] option,
and press ENTER (b) to finish setting.
36 Operating
Viewing content information
y
Selecting a subtitle file
y
The player can display the content information.
If the subtitle file name is different from the video
file name, you need to select the subtitle file on the
[Movie] menu before playing the movie.
1. Select a file using w/s/a/d.
2. Press INFO/MENU (m). The file information
appears on the screen.
During video playback, you can display the file
information by pressing TITLE/POPUP.
1.Use w/s/a/d to select the subtitle file you
wish to play in the [Movie] menu.
2. Press ENTER (b).
,,Note
The information displayed on the screen
may not correct comparing actual content
information.
Changing content list view
yui
4
In the [Movie], [Photo] or [Music] menu, you can
change the content list view.
Operating
Press red (R) colored button repeatedly.
Press ENTER (b) again to deselect the subtitle
file. Selected subtitle file will be displayed when
you play the video file.
,,Note
If you press Z (STOP) during playback, the
subtitle selection is cancelled.
Operating 37
Listening to music during slide
show
i
You can display photo files while listening to audio
files.
1. While viewing a photo in full screen, press INFO/
MENU (m) to display the option menu.
2. Select an [Option] using a/d, and press
ENTER (b).
3. Use w/s to select [Music Select] option, and
press ENTER (b) to display the [Music Select]
menu.
4.Use w/s to select a device, and press
ENTER (b).
Playing file encoded in 3D
y
This function allows you to play 3D content in case of
file encoded in 3D.
1. During playback, press INFO/MENU (m).
2. Select [3D] using a/d, and press ENTER (b).
3. Select suitable mode (side by side, top and
bottom) which is same way as file encoded in 3D
by using w/s/a/d.
,,Note
If the subtitle is displayed abnormally, set the
TV’s 3D option to off and the unit’s 3D option
to on.
Available device may differ depending on the
location of the current photo file.
Photo location
Available Device
Disc, USB
MTP
MTP
5.Use w/s to select a file or a folder you wish to
play.
Select g and press ENTER (b) to display the
upper directory.
6.Use d to select [OK], and press ENTER (b) to
complete music selection.
4
Operating
Disc, USB
38 Operating
Advanced Features
Enjoying BD-Live™
e
BD-ROM supporting BD-Live that has a network
extension function allows you to enjoy more
functions such as downloading new movie trailers by
connecting this unit to the internet.
1. Check the network connection and settings
(page 14).
2. Insert a USB storage device to the USB port on
the front panel.
A USB storage device is needed to download
bonus content.
4
3. Press HOME ( ), and set the [BD-LIVE
connection] option on the [Settings] menu (page
18).
Operating
Depending on a disc, the BD-Live function may
not be operated if [BD-LIVE connection] option is
set to [Partially Permitted].
4. Insert a BD-ROM with BD-Live.
The operations may differ depending on the disc.
Refer to the manual supplied with the disc.
>>Caution
Do not extract the connected USB device while
content is being downloaded or a Blu-ray disc
is still in the disc tray. Doing so may damage the
connected USB device and BD-Live features may
not operate properly with the damaged USB
device anymore. If the connected USB device
seems damaged from such an action, you can
format the connected USB device from the PC
and reuse it with this player.
,,Note
yy Some BD-Live content may be restrictively
accessed in some territories by content
provider’s own decision.
yy It may take up to several minutes to load and
start enjoying BD-Live content.
yy For BD-Live, use the USB flash drive /
external HDD formatted in FAT32 only.
Troubleshooting 39
Troubleshooting
General
Symptom
Cause & Solution
The unit does not work properly.
yy Turn off the power of this unit and the connected external device (TV,
Woofer, DVD-player, Amplifier, etc.) and turn it on again.
yy Disconnect the power cord of this unit and the connected external
device (TV, Woofer, DVD-player, Amplifier, etc.) and then try connecting
again.
The Power does not turn on.
yy Plug the power cord into the wall outlet securely.
yy Be sure that the AC adaptor is connected to the unit securely.
The unit does not start
playback.
yy Insert a playable disc. (Check the disc type, color system, and regional
code.)
yy Place the disc with the playback side down.
yy Place the disc on the disc tray correctly inside the guide.
yy Clean the disc.
yy Cancel the Rating function or change the rating level.
The connected USB storage
device is not recognized.
yy Try using different USB cable, some USB cables may not support
enough current for normal USB operation.
yy A USB device which requires additional program installation when you
have connected it to a computer is not supported.
yy This unit supports only USB Flash Drive and USB External HDD with
FAT32 or NTFS format.
The angle cannot be changed.
yy Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music files.
yy The files are not recorded in a format that the unit can play.
The remote control does not
work properly.
yy The remote control is not pointed at the remote sensor of the unit.
yy The unit does not support the codec of the movie file.
yy The remote control is too far from the unit.
yy There is an obstacle in the path of the remote control and the unit.
yy The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or off.
The unit is not operating
normally.
You can reset the unit as follows.
yy Unplug the power cord, wait at least five seconds, and then plug it in
again.
5
Troubleshooting
yy If you use a USB extension cable or USB HUB, the USB devices may not
be recognized.
40 Troubleshooting
Network
Symptom
Cause & Solution
BD-Live feature does not work.
yy The connected USB storage may not have enough space. Connect the
USB storage with at least 1GB free space.
yy Ensure that the unit is correctly connected to the local area network
and can access the internet (page 14).
yy Your broadband speed may not fast enough to use the BD-Live
features. Contact your Internet Service Provider (ISP) and increase the
broadband speed is recommended.
yy The [BD-LIVE connection] option in the [Settings] menu is set to
[Prohibited]. Set the option to [Permitted].
5
Troubleshooting
Troubleshooting 41
Picture
Symptom
Cause & Solution
There is no picture.
yy Select the appropriate video input mode on the TV so the picture from
the unit appears on the TV screen.
yy Connect the video connection securely.
yy Check the [HDMI Color Setting] in the [Settings] menu is set to the
appropriate item that conforms to your video connection.
yy Your TV may not support the resolution you have set on the player.
Change the resolution that your TV accepts.
yy The player’s HDMI OUT jack is connected to a DVI device that does not
support copyright protection.
Picture noise appears.
yy You are playing a disc recorded in a color system that is different from
your TV.
yy Set the resolution which your TV accepts.
Blu-ray 3D disc playback does
not output 3D views.
yy Connect the player to your TV with HDMI cable (Type A, High Speed
HDMI™ Cable).
yy Your TV may not support “HDMI 3D mandatory format”.
yy The [3D Mode] option in the [Settings] menu is set to [Off].
Set the option to [On].
Customer support
OPEN SOURCE SOFTWARE NOTICE INFORMATION
To obtain the source code under GPL, LGPL, MPL, and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping, and handling) upon email request to
opensource@lge.com. This offer is valid for a period of three years after our last shipment of this product. This
offer is valid to anyone in receipt of this information.
5
Troubleshooting
You can update the Player using the latest software to enhance the products operation and/or add new
features. To obtain the latest software for this player (if updates have been made), please visit
http://www.lg.com or contact LG Electronics customer care center.
42 Appendix
Controlling a TV with
the Supplied Remote
Control
You can control your TV using the buttons below.
You can operate your TV with the supplied remote
control.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1. While holding down 1 (TV POWER) button, and
press the manufacturer code for your TV with the
numerical buttons (see the table below).
Manufacturer
Code Number
LG
1(Default), 2
Zenith
1, 3, 4
GoldStar
1, 2
By pressing
You can
Samsung
6, 7
1 (TV POWER)
Turn the TV on or off.
Sony
8, 9
Hitachi
4
INPUT
Switch the TV’s input source
between the TV and other
input sources.
VOL +/–
Adjust the volume of the TV
,,Note
Depending on the unit being connected, you
may not be able to control your TV using some
of the buttons.
6
Setting up the remote to control
your TV
2. Release the 1 (TV POWER) button to complete
setting.
Depending on your TV, some or all buttons may not
function on the TV, even after entering the correct
manufacturer code. When you replace the batteries
of the remote, the code number you have set may be
reset to the default setting. Set the appropriate code
number again.
Appendix
Appendix 43
Network Software
Update
Network update notification
From time to time, performance improvements
and/or additional features or services may be made
available to units that are connected to a broadband
home network. If there is new software available
and the unit is connected to a broadband home
network, the player will inform you about the update
as follows.
Option 1:
1. The update menu will appear on the screen when
you turn on the player.
2.Use a/d to select a desired option and then
press ENTER (b).
Software update
You can update the player using the latest software
to enhance the products operation and/or add new
features. You can update the software by connecting
the unit directly to the software update server.
,,Note
yy Before updating the software in your player,
remove any disc and USB Device from the
player.
yy Before updating the software in your player,
turn the player off and then turn it back on.
yy During the software update procedure, do
not turn off the player or disconnect AC
power, or do not press any button.
yy If you cancel the update, turn off the power
and turn it on for stable performance.
yy This unit cannot be updated to previous
software version.
1. Check the network connection and settings
(page 14).
2. Select [Software] option in the [Settings] menu
then press ENTER (b).
3. Select [Update] option, and press ENTER (b).
The player will check for the newest update.
[OK]
Starts the software update.
[Cancel]
Exits the update menu and the
home menu appears.
If the software update is available from the update
server, the “Update” icon appears in the Home menu.
Press blue (B) colored button to start the update
procedure.
yy If there is no update available, the Message,
“No update is found.” appears. Press
ENTER (b) to return to the [Home Menu].
6
Appendix
Option 2:
,,Note
yy Pressing ENTER (b) while checking for the
update will end the process.
44 Appendix
4. If newer version exists, the message “A new
update was found. The update takes a few
minutes. Do you want to update?” appears.
5. Select [OK] to start update. (Selecting [Cancel]
will end the update.)
6. The player starts downloading the newest update
from the server. (Downloading will takes several
minutes depending on your home network
condition.)
7. To update software the next time, the software
update procedure has to be started from the
beginning again.
>>Caution
Do not turn off the power during the software
update.
,,Note
If the software includes the driver update, disc
tray may open during the process.
8. When update is completed, the power will be
turned off automatically in a few seconds.
9. Turn the power back on. The system now
operates with the new version.
,,Note
6
Appendix
The Software Update function may not
work properly depending on your internet
environment. In this case, you can obtain
the latest software from the authorized LG
Electronics Service Center then update your
player. Refer to “Customer Support” on page
41.
Appendix 45
Additional Information
File requirement
Video files
File
Extension
Audio
Format
Codec Format
“.avi”, “.mpg”, “.mpeg”, “.mkv”,
“.mp4”, “.asf”, “.wmv”, “.m4v”
(DRM free), “.vob”, “.3gp”,
“.mov”, “.trp”, “.m2t”, “.mpe”,
“.m1v”, “.m2v”, “.wm”, ”.flv”,
“.ts”, “.dat”
XVID, MPEG1 SS, H.264/
MPEG-4 AVC, MPEG2
PS, MPEG2 TS, VC-1 SM,
HEVC
Subtitle
Dolby Digital,
DTS, MP3,
AAC, AC3
SubRip (.srt / .txt), SAMI (.smi),
SubStation Alpha (.ssa/.txt),
MicroDVD (.sub/.txt), VobSub (.sub),
SubViewer 1.0 (.sub), SubViewer
2.0 (.sub/.txt), TMPlayer (.txt), DVD
Subtitle System (.txt)
Audio files
Codec Name
MP3
Sampling Frequency
8 kHz/16 kHz/32 kHz
Bitrate
Note
8 kbps ~ 320 kbps
11 kHz/22 kHz/44 kHz
12 kHz/24 kHz/48 kHz
Vorbis (Ogg)
8 kHz/11 kHz/12 kHz/16 kHz/22 kHz/
24 kHz/32 kHz/44.1 kHz/48 kHz/64 kHz/
88.2 kHz/96 kHz
unlimited
WAV (PCM)
8 kHz/16 kHz/32 kHz
64 kbps ~ 36 mbps
11 kHz/22 kHz/44 kHz/88.2 kHz/176.4 kHz
12 kHz/24 kHz/48 kHz
48 kHz/96 kHz/192 kHz
88.2 kHz/176.4 kHz/192 kHz
64 kbps ~ 16.2 mbps
8 kHz/16 kHz/22.05 kHz/11.025 kHz
24 kHz/32 kHz/44.1 kHz
48 kHz/96 kHz/12 kHz
AAC (m4a)
8 kHz/11 kHz/12 kHz/16 kHz/22 kHz/
24 kHz/32 kHz/44.1 kHz/48 kHz/64 kHz/
88.2 kHz/96 kHz
less than 320 kbps
AIFF (PCM)
8 kHz/16 kHz/32 kHz
64 kbps ~ 36 mbps
11 kHz/22 kHz/44 kHz/88.2 kHz/176.4 kHz
12 kHz/24 kHz/48 kHz
48 kHz/96 kHz/192 kHz
6
Appendix
FLAC
Some wav
files are not
supported on
this player.
46 Appendix
Photo files
File
Extension
“.jpg”, “.jpeg”, “.png”,
“.gif”, “.mpo”, “.jps”
6
Recommended
Size
Less than 4,000 x 3,000 x 24 bit/pixel
Less than 3,000 x 3,000 x 32 bit/pixel
Note
Progressive and lossless compression
photo image files are not supported.
Appendix
Appendix 47
,,Note
yy The file name is limited to 180 characters.
yy Maximum files/Folder: Less than 2000 (total
number of files and folders)
,,Note
yy A “avi” file which is encoded “WMV 9 codec”
is not supported.
yy Depending on the size and number of the
files, it may take several minutes to read the
content on the media.
yy This player supports UTF-8 files even it
contains Unicode subtitle content. This player
can not support the pure Unicode subtitle
files.
yy The total playback time of audio file indicated
on the screen may not correct for VBR files.
yy Depending on the types of file or ways of
recording, it may not play back.
yy HD video files contained on the CD/DVD or
USB 1.0/1.1 may not played properly.
Blu-ray Disc or USB 2.0 are recommended to
play back HD video files.
yy A disc which was recorded by multi-session
on normal PC is not supported on this player.
yy This player supports H.264/MPEG-4 AVC
profile Main, High at Level 4.1. A file with
higher level may not be supported.
yy When you play a video file with a extension
such as “.ts”, “.m2ts”, “.mts”, “.tp”, “.Trp” or “.m2t”,
your player may not support subtitle files.
yy This player does not support files that are
recorded with GMC*1 or Qpel*2.
yy The total playback time of audio file indicated
on the screen may not correct for VBR files.
*1 GMC – Global Motion Compensation
yy Video / Audio codec compatibility may differ
depending on video file.
*2 Qpel – Quarter pixel
yy To playback a video file, video file name and
Subtitle file name must be the same.
AVCHD (Advanced Video Codec
High Definition)
yy This player can playback AVCHD format discs.
These discs are normally recorded and used in
camcorders.
yy The AVCHD format is a high definition digital video
camera format.
6
yy The MPEG-4 AVC/H.264 format is capable of
compressing images at higher efficiency than that
of the conventional image compressing format.
Appendix
yy This player can playback AVCHD discs using
“x.v.Color” format.
yy Some AVCHD format discs may not play
depending on the recording condition.
yy AVCHD format discs need to be finalized.
yy “x.v.Color” offers a wider color range than normal
DVD camcorder discs.
48 Appendix
Certain system requirements
Compatibility notes
For high definition video playback:
yy Because BD-ROM is a new format, certain disc,
digital connection and other compatibility issues
are possible. If you experience compatibility
problems, please contact an authorized Customer
Service Center.
yy High definition display that has HDMI input jack.
yy BD-ROM disc with high definition content.
yy HDMI or HDCP capable DVI input on your display
device is required for some content (as specified
by disc authors).
For Dolby® Digital Plus, Dolby TrueHD and DTS-HD
multi-channel audio playback:
yy An amplifier/receiver with a built-in (Dolby Digital,
Dolby Digital Plus, Dolby TrueHD, DTS or DTS-HD)
decoder.
yy Main, center, surround speakers and subwoofer as
necessary for chosen format.
yy This unit allows you to enjoy functions such
as picture-in-picture, secondary audio and
Virtual packages, etc., with BD-ROM supporting
BONUSVIEW (BD-ROM version 2 Profile 1 version
1.1). Secondary video and audio can be played
from a disc compatible with the picture-in-picture
function. For the playback method, refer to the
instructions in the disc.
yy Viewing high-definition content and up-converting
standard DVD content may require a HDMIcapable input or HDCP-capable DVI input on your
display device.
yy Some BD-ROM and DVD discs may restrict the use
of some operation commands or features.
yy Dolby TrueHD, Dolby Digital Plus and DTS-HD are
supported with maximum 7.1 channels if you use
HDMI connection for the audio output of the unit.
yy You can use a USB device to store some disc
related information, including downloaded online
content. The disc you are using will control how
long this information is retained.
6
Appendix
Appendix 49
Audio Output Specifications
Jack/Setting
Source
Dolby Digital
OPTICAL (DIGITAL AUDIO OUT) *3
PCM
DTS Re-encode *4
Auto
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
DTS
Dolby Digital
Dolby TrueHD
PCM 2ch
DTS 2ch
Dolby Digital
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS
Linear PCM 2ch
PCM 2ch
DTS 2ch
PCM 2ch
Linear PCM 5.1ch
PCM 2ch
DTS
PCM 2ch
Linear PCM 7.1ch
PCM 2ch
DTS
PCM 2ch
Jack/Setting
Source
HDMI OUT
PCM
DTS Re-encode *4
Auto *1 *2
Dolby Digital
PCM 2ch
DTS
Dolby Digital
Dolby Digital Plus
PCM 2ch
DTS
Dolby Digital Plus
Dolby TrueHD
PCM 2ch
DTS 2ch
Dolby TrueHD
DTS
PCM 2ch
DTS
DTS
DTS-HD
PCM 2ch
DTS
DTS-HD
Linear PCM 2ch
PCM 2ch
DTS 2ch
Linear PCM 2ch
Linear PCM 5.1ch
PCM 5.1ch
DTS
Linear PCM 5.1ch
Linear PCM 7.1ch
PCM 7.1ch
DTS
Linear PCM 7.1ch
*2 This player automatically selects the HDMI
audio according to the decoding capability of
the connected HDMI device even though [Digital
Output] option is set to [AUTO].
*3 On the PCM audio output, the sampling
frequency of DIGITAL AUDIO OUT is limited to 96
kHz.
*4 If the [Digital Output] option is set to [DTS reencode], the audio output is limited to 48 kHz
and 5.1Ch. If the [Digital Output] option is set
to [DTS re-encode], the DTS Re-encode audio
is outputted for BD-ROM discs, and the original
audio is outputted for the other discs (like
[AUTO]).
Appendix
*1 The secondary and interactive audio may not
be included in the output bitstream if [Digital
Output] option is set to [AUTO]. (Except LPCM
Codec: The output always includes interactive and
secondary audio.)
6
50 Appendix
Area Code List
Choose an area code from this list.
AreaCode AreaCode AreaCode AreaCode
SG
MC Singapore FJ Monaco Afghanistan AF Fiji 6
MN Slovak Republic SK
Argentina AR Finland FI Mongolia Australia AU France FR Morocco MA Slovenia Austria AT Germany DE Nepal NP South Africa ZA
Belgium BE Great Britain GB Netherlands NL South Korea KR
Bhutan BT Greece GR Antilles AN Spain ES
Bolivia BO Greenland GL New Zealand NZ Sri Lanka LK
Brazil BR Hong Kong HK Nigeria NG Sweden SE
Cambodia KH Hungary HU Norway Canada CA India IN Oman Chile CL Indonesia ID Pakistan PK Thailand China CN Israel IL Panama PA Turkey TR
Colombia CO Italy IT Paraguay PY Uganda UG
Congo CG Jamaica CR Japan Croatia HR Kenya Ukraine PL United States PT Uruguay UA
Costa Rica JM Philippines PH
JP Poland KE Portugal KW Romania Appendix
Czech Republic CZ Kuwait Denmark DK Libya Ecuador EC Luxembourg Egypt EG Malaysia El Salvador SV Maldives LY Russian
Federation LU
Saudi Arabia MY
Senegal MV
Ethiopia ET Mexico MX
SI
NO Switzerland CH
OM Taiwan TW
RO Uzbekistan RU
SA
SN
TH
US
UY
UZ
Vietnam VN
Zimbabwe ZW
Appendix 51
Language Code List
Use this list to input your desired language for the following initial settings: [Disc Audio],
[Disc Subtitle] and [Disc Menu].
LanguageCode
Afar 6565
LanguageCode
French 7082
LanguageCode
Lithuanian 7684
LanguageCode
Sindhi 8368
Afrikaans 6570
Frisian 7089
Macedonian 7775
Singhalese 8373
Albanian 8381
Galician 7176
Malagasy 7771
Slovak 8375
Amharic 6577
Georgian 7565
Malay 7783
Slovenian 8376
Arabic 6582
German 6869
Malayalam 7776
Spanish 6983
Armenian 7289
Greek 6976
Maori 7773
Sudanese 8385
Assamese 6583
Greenlandic 7576
Marathi 7782
Swahili 8387
Aymara 6588
Guarani 7178
Moldavian 7779
Swedish 8386
Azerbaijani 6590
Gujarati 7185
Mongolian 7778
Tagalog 8476
Bashkir 6665
Hausa 7265
Nauru
7865
Tajik 8471
Basque 6985
Hebrew 7387
Nepali 7869
Tamil 8465
Bengali; Bangla 6678
Hindi 7273
Norwegian 7879
Telugu 8469
Bhutani 6890
Hungarian 7285
Oriya 7982
Thai 8472
Bihari 6672
Icelandic 7383
Panjabi 8065
Tonga 8479
Breton 6682
Indonesian 7378
Pashto, Pushto 8083
Turkish 8482
8475
6671
Interlingua 7365
Persian 7065
Burmese 7789
Irish 7165
Polish 8076
Twi 8487
Byelorussian 6669
Italian 7384
Portuguese 8084
Ukrainian 8575
Chinese 9072
Japanese 7465
Quechua 8185
Urdu 8582
Croatian 7282
Kannada 7578
Rhaeto-Romance 8277
Uzbek 8590
Czech 6783
Kashmiri 7583
Rumanian 8279
Vietnamese 8673
Danish 6865
Kazakh 7575
Russian 8285
Volapük 8679
Dutch 7876
Kirghiz 7589
Samoan 8377
Welsh 6789
English 6978
Korean 7579
Sanskrit 8365
Wolof 8779
7168
Xhosa 8872
Esperanto 6979
Kurdish 7585
Scots Gaelic Estonian 6984
Laotian 7679
Serbian 8382
Yiddish 7473
Faroese 7079
Latin 7665
Serbo-Croatian 8372
Yoruba 8979
Fiji 7074
Latvian, Lettish 7686
Shona 8378
Zulu 9085
Finnish 7073
Lingala 7678
6
Appendix
Bulgarian Turkmen 52 Appendix
Trademarks and
Licenses
All other trademarks are trademarks of their
respective owners.
Manufactured under license from Dolby
Laboratories. Dolby, Dolby Audio, and the double-D
symbol are Trademarks of dolby Laboratories.
Blu-ray Disc™, Blu-ray™, Ultra HD Blu-ray Disc™,
Ultra HD Blu-ray™, Blu-ray 3D™, BD-Live™,
BONUSVIEW™ and the logos are trademarks of
the Blu-ray Disc Association.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, & DTS and the Symbol
together are registered trademarks, and DTS
2.0+Digital Out is a trademark of DTS, Inc. © DTS,
Inc. All Rights Reserved.
“DVD Logo” is a trademark of DVD Format/Logo
Licensing Corporation.
6
Java is a trademark of Oracle and/or its affiliates.
Appendix
The terms HDMI and HDMI High-Definition
Multimedia Interface, and the HDMI logo are
trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other
countries.
“x.v.Color” is a trademark of Sony Corporation.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
Appendix 53
Cinavia Notice
This product uses Cinavia technology to limit the
use of unauthorized copies of some commerciallyproduced film and videos and their soundtracks.
When a prohibited use of an unauthorized copy is
detected, a message will be displayed and playback
or copying will be interrupted.
More information about Cinavia technology is
provided at the Cinavia Online Consumer Information
Center at http://www.cinavia.com. To request
additional information about Cinavia by mail, send
a postcard with your mailing address to: Cinavia
Consumer Information Center, P.O. Box 86851, San
Diego, CA, 92138, USA.
This product incorporates proprietary technology
under license from Verance Corporation and is
protected by U.S. Patent 7,369,677 and other U.S.
and worldwide patents issued and pending as well
as copyright and trade secret protection for certain
aspects of such technology. Cinavia is a trademark of
Verance Corporation. Copyright 2004-2013 Verance
Corporation. All rights reserved by Verance. Reverse
engineering or disassembly is prohibited.
6
Appendix
54 Appendix
Specifications
General
Power requirements
Refer to main label.
Power consumption
Refer to main label.
Dimensions (W x H x D)
Approx. 430 mm x 45.5 mm x 205 mm
Operating temperature
Operating humidity
5 °C - 35 °C
5 % - 90 %
Outputs
HDMI out (Video/ Audio)
(HDMI OUT TO TV)
Digital audio out
(OPTICAL AUDIO OUT)
19 pin (Type A, HDMI™ Connector) x 1
3 V (p-p), Optical jack x 1
System
Laser
wavelength
Signal system
LAN port
Bus Power Supply (USB)
Semiconductor laser
405 nm / 650 nm
Standard NTSC/PAL Color TV system
Ethernet jack x 1, 10BASE-T / 100BASE-TX
5 V 0 500 mA
yy Design and specifications are subject to change without notice.
6
Appendix
Appendix 55
Maintenance
Notes on discs
Handling discs
Handling the unit
When shipping the unit
Please save the original shipping carton and packing
materials. If you need to ship the unit, for maximum
protection, re-pack the unit as it was originally
packed at the factory.
Cleaning the unit
To clean the player, use a soft, dry cloth. If the
surfaces are extremely dirty, use a soft cloth lightly
moistened with a mild detergent solution. Do not use
strong solvents such as alcohol, benzine, or thinner,
as these might damage the surface of the unit.
Keeping the exterior surfaces clean
yy Do not use volatile liquids such as insecticide spray
near the unit.
Do not touch the playback side of the disc. Hold the
disc by the edges so that fingerprints do not get on
the surface. Never stick paper or tape on the disc.
Storing discs
After playing, store the disc in its case. Do not
expose the disc to direct sunlight or sources of heat
and never leave it in a parked car exposed to direct
sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor
picture quality and sound distortion. Before playing,
clean the disc with a clean cloth. Wipe the disc from
the center to outer edge.
Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for older vinyl records.
yy Wiping with strong pressure may damage the
surface.
yy Do not leave rubber or plastic products in contact
with the unit for a long period of time.
Maintaining the unit
6
Appendix
The unit is a high-tech, precision device. If the optical
pick-up lens and disc drive parts are dirty or worn,
the picture quality could be diminished. For details,
please contact your nearest authorized service
center.
Download PDF

advertising