LG | LS-C306MMM0 | LG LS-C306MMM0 Owner’s Manual

LG
Room Air Conditioner
OWNER'S MANUAL
Prior to
installation, this airconditioning unit must be submitted
for approval by the utility service
which provides electricity
(EN 61000-2, EN 61000-3 Norm).
?
Please read this owner's manual
before
?
installing
and
carefully
operating your
room
and
thoroughly
air conditioner.
Please retain this owner's manual for future reference after
reading it thoroughly.
FOR YOUR RECORDS
Safety
Precautions .................3
Write the model and serial numbers here:
Model #
Prior to
Operation
Operating
..................9
Instructions.........10
Remote Controller ............10
Serial #
You
can
find them
Operation...........................11
to prove
Indoor unit.........................23
Outdoor unit ......................24
Operation Tips ..................25
Troubleshooting
..............26
on
the side of each unit.
Date Purchased
Staple
Maintenance and Service ....23
label
Dealer's Name
Remote Control
Additional features...............20
on a
receipt to this page in the event you need
date of purchase or for warranty issues.
your
it
READ THIS MANUAL
Inside you will find many helpful hints on how to use and
maintain your air conditioner properly. Just a little
preventive
care on
of time and money
your
over
you a great deal
the life of your air conditioner.
part
can save
You'll find many answers to common problems in the
chart of troubleshooting tips. If you review our chart of
Troubleshooting Tips first,
you may not need to call for
service at all.
PRECAUTION
?
?
?
?
?
?
2
Room Air Conditioner
Contact the authorized service technician for
maintenance of this unit.
repair
or
Contact the installer for installation of this unit.
The air conditioner is not intended for use
children or invalids without supervision.
Young children should be supervised to
they do not play with the air conditioner.
by
young
ensure
that
When the power cord is to be replaced, replacement
work shall be performed by authorized personnel only
using only genuine replacement parts.
Installation work must be performed in accordance
with the National Electric Code by qualified and
authorized personnel only.
Safety
Safety
To
Precautions
Precautions
prevent the injury of the
other
user or
people
and
property damage, the following instructions
must be
followed.
Incorrect
by
operation due to ignoring
following indications.
the
The
instruction will
cause
harm
or
damage.
The seriousness is classified
WARNING
This
symbol
indicates the
possibility
of death
or
serious
CAUTION
This
symbol
indicates the
possibility
of
or
damage to properties only.
meanings
of the
symbols
used in this manual
are as
Be
Be
sure
injury
ENGLISH
injury.
shown below.
sure
not to do.
to follow the instruction.
WARNING
Installation
Do not
For electrical
the power plug
and socket with the ground
work, contact
the dealer, seller, a qualified
electrician, or an Authorized
damaged power
cords, plugs, or a loose
use
socket.
Always
use
terminal.
Service Center.
?
There is risk of fire
or
electric
?
shock.
or
electric
?
panel
and the
Do not
of control box
modify
or
Do not
extend the
power cord.
There is risk of fire
shock.
or
electric
?
There is risk of fire
shock.
install,
remove,
or
re-install the unit
by
yourself (customer).
securely.
?
There is risk of electric shock.
shock.
Install the
cover
There is risk of fire
or
electric
?
There is risk of
fire, electric
shock, explosion,
or
injury.
Owner's Manual
3
Safety
?
Precautions
Be cautious when
For
unpacking and installing
the product.
contact the dealer
could
Sharp edges
injury.
Be especially careful of the
case edges and the fins on the
condenser and
Be
cause
?
There is risk of
or
defective installation
stand.
?
injury.
It may
injury, accident,
the product.
cause
damage
to
or
Do not let the air conditioner
area
age.
humidity
for
door
collapses,
the air
?
conditioner could fall with
it, causing
property damage, product failure,
and
fire, electric
shock, explosion,
run
If the base
on a
Authorized Service Center.
does not deteriorate with
?
or an
product
evaporator.
the installation
sure
Do not install the
installation, always
or
a
long
time when the
is very high and a
a window is left open.
Moisture may condense and
wet
or
damage furnishings.
personal injury.
Operation
Take
care
to
ensure
Do not
that
power cords could not be
place anything
Do not turn the air-
on
the power cord.
conditioner ON
pulled out or damaged
during operation.
?
There is risk of fire
or
electrical
shock.
4
Room Air Conditioner
plugging or
power plug.
?
There is risk of fire
shock.
or
electric
?
There is risk of fire
shock.
OFF
by
unplugging the
or
or
electrical
Safety
?
Use
a
dedicated outlet for
this
appliance.
There is risk of fire
or
electrical
Grasp the plug
?
shock.
to
Do not
remove
place a heater or
appliances near the
the cord from the outlet. Do
other
not touch it with wet hands.
power cable.
There is risk of fire
or
electrical
Precautions
?
shock.
There is risk of fire and electric
shock.
ENGLISH
Do not allow water to
Do not store
run
Do not
or use
flammable gas or
combustibles near the air
into electric parts.
use
product
in
space for
a
the
tightly closed
long time.
a
conditioner.
?
It may cause There is risk of
fire, failure of the product, or
?
There is risk of fire
or
failure of
?
Oxygen deficiency
could
occur.
product.
electric shock.
Wax
When flammable gas leaks,
turn off the gas and open a
the unit if strange
sounds, odors, or smoke
window for ventilation
comes
Unplug
Stop operation
and close
the window in storm
from it.
hurricane. If
or
possible,
before turn the
remove
DO NOT
from the window before the
or
?
Thinner
product on.
use the telephone
turn switches
There is risk of
on or
explosion
off.
or
fire.
the air conditioner
hurricane arrives.
?
There is risk of electrical shock
or
fire
?
There is risk of
damage,
property
failure of
product,
or
electric shock.
Owner's Manual
5
Safety
Precautions
Do not open the inlet
the product during
of
When the
product is soaked
(flooded or submerged),
not touch the
operation. (Do
?
grill
contact
an
Authorized
electrostatic filter, if the unit
is so equipped.)
Service Center.
There is risk of
?
electric
physical injury,
shock, or product
product from
time to time when operating
it together with a stove, etc.
Ventilate the
There is risk of fire
or
eletric
?
shock.
There is risk of fire
or
electrical
shock.
failure.
Unplug the appliance before
performing cleaning or
When the
product is not be
used for a long time,
disconnect the power supply
plug or turn off the breaker.
maintenance.
?
There is risk of electrical shock.
?
There is risk of
or
failure,
or
product damage
Take
care
nobody
to
ensure
could
step
that
on or
onto the outdoor unit.
?
unintended
This could result in
injury
and
personal
product damage.
operation.
CAUTION
Installation
Always check for gas
(refrigerant) leakage after
installation or repair of
product.
Low
?
refrigerant
cause
failure of
levels may
product.
Install the drain hose to
ensure
away
?
that water is drained
properly.
A bad connection may
water
Keep level even when
installing the product.
leakage.
cause
?
To avoid vibration
or
leakage.
90˚
6
Room Air Conditioner
water
fall
Precautions
Safety
Do not install the
where the noise
Use two
product
or
hot air
?
It may
the
people
Do not install the
to
product
where it will be exposed to
sea wind (salt spray)
directly.
lift and transport the air
conditioner.
from the outdoor unit could
damage
or more
neighborhoods.
cause a
problem
for your
?
Avoid
personal injury.
?
It may
cause
corrosion
on
the
product. Corrosion, particularly
neighbors.
the condenser and
could
or
ENGLISH
on
evaporator fins,
product malfunction
inefficient operation.
cause
Operation
Do not direct airflow at
Do not
occupants. (Don't sit
in the draft.)
special purposes, such as
preserving foods, works of
room
use
the
product for
art, etc. It is
a consumer
conditioner,
not
a
Do not block the inlet
or
outlet of air flow.
air
precision
refrigeration system.
?
This could
damage
your health.
?
There is risk of
of
Use
not
a
soft cloth to clean. Do
use
harsh
solvents,
?
detergents,
fire, electric
shock, or damage to the plastic
parts of the product.
?
loss
?
It may
cause
product
failure.
property.
Do not touch the metal
Do not
parts of the product when
anyting on the product.
(outdoor units)
removing the air
are very sharp!
etc.
There is risk of
damage
or
There is risk of
filter.
They
personal injury.
?
step
on or
put
There is risk of
and failure of
personal injury
product.
Owner's Manual
7
Safety
Precautions
Do not insert hands
Always insert the filter
securely. Clean the filter
every two weeks or
often if necessary.
?
objects through
more
or
A
dirty filter reduces the
efficiency of the air conditioner
and could cause product
malfunction or damage.
Use
a
firm stool
maintaining
drained from the unit.
outlet while the air
plugged
There
and
?
Do not drink the water
other
the air inlet
conditioner is
ladder when
or
or
are
sharp
parts that could
in.
moving
cause personal
?
It is not
cause
sanitary
and could
serious health issues.
injury.
cleaning
or
the air conditioner.
Replace the
all batteries in the remote
control with
new ones
not mix old and
new
of the
same
batteries
or
type. Do
different
types of batteries.
?
Be careful and avoid
personal injury.
?
There is risk of fire
or
explosion
Disuse
Do not
recharge
or
batteries. Do not
disassemble the
dispose
of batteries in
If the
liquid
from the batteries
gets
onto
your skin or clothes, wash it well with clean
water. Do not use the remote if the batteries
a
fire.
have leaked.
?
They
may burn
or
explode.
?
The chemicals in batteries could
other health hazards.
8
Room Air Conditioner
cause
burns
or
Prior to
Prior to
1. Contact
2.
in the power
Plug
3. Use
installation
an
operation
for
Preparing
operation
specialist
for installation.
ENGLISH
plug properly.
dedicated circuit.
a
4. Do not
use an
5. Do not
start/stop operation by plugging/unplugging
6. If the
operation
extension cord.
cord/plug
is
damaged, replace
it with
only
an
the power cord.
authorized
replacement part.
Usage
1.
Being exposed
to direct airflow for
an
Do not expose
occupants, pets,
plants
2. Due to the
other
possibility of
heating devices.
3. Do not
use
oxygen
or
extended
of time could be hazardous to your health.
to direct airflow for extended periods of time.
deficiency,
period
ventilate the
room
when used
together with
stoves
or
this air conditioner for
food, pets, plants, and
art
non-specified special purposes (e.g. preserving precision devices,
objects). Such usage could damage the items.
Cleaning and maintenance
1. Do not touch the metal
sharp
metal
2. Do not
leading
use
to
parts of the unit when removing the filter. Injuries
can occur
when
handling
edges.
water to clean inside the air conditioner.
possible
Exposure
to water
can
destroy the insulation,
electric shock.
3. When
cleaning the unit, first make sure that the power and breaker are
a very high speed during operation. There is a possibility of injury if the
triggered on while cleaning inner parts of the unit.
turned off. The fan rotates at
unit's power is
accidentally
Service
For
repair
and maintenance, contact your authorized service dealer.
Symbols
Used in this Manual
This
symbol
This
symbol
This
symbol
alerts you to the risk of electric shock.
alerts you to hazards that could
air conditioner.
indicates
special
cause
harm to the
notes.
Owner's Manual
9
Operating
Instructions
Instructions
Operating
Remote Controller
1. Remove the
arrow
2. Insert
3.
battery
cover
by pulling
it
according
to the
direction.
making sure that the (+) and (-)
battery are installed correctly.
Reattach the cover by sliding it back into position.
new
batteries
of
Use 2
Do
AAA(1.5volt) batteries.
not use rechargeable batteries.
Storage
?
Tips For Using the Remote Control
and
The remote control may be stored mounted
on a
wall.
?
To
operate the
control at
conditioner, aim the
the signal receptor.
room
air
remote
Signal Receptor
Receives the
signals
from the remote
Indication
Operation
On/Off
control.(Signal receiving
sound: two short
Lights
up
during
the
:
Lights
up
during
Timer
Defrost Mode
:
Lights up during Defrost Mode or *Hot
Start operation (Heat pump model only)
Outdoor unit
:
Lights up during outdoor
(Cooling model only)
Plasma Mode
:
Lights up during plasma-purification operation.
(option)
Auto Restart Mode
:
Lights
Auto Restart Button
:
In failure of electric power, if the button is
or
Sleep
Mode
operation
Operation
Button
:
up
during
Operation starts,
and
*Hot Start
10
operation: Stops the
operation
unit
Sleep
or
mode.
operation.
if Restart Button is
pressed.
Signal
receptor
Operation
indication
lamps
when this button is
stops when you press the
indoor fan in
Room Air Conditioner
long beep.)
system operation.
pressed the unit runs as previous setting
operation when power returns.
Forced
or one
Lamps
:
Timer
beeps
pressed
button again.
Heating Operation
to
prevent cold air from blowing
out from unit.
Operating
Remote Control
The remote control transmits the
Instructions
Operation
signals
to the
system.
1. START/STOP BUTTON
Operation starts when this button is
pressed and stops when the button is
ENGLISH
pressed again.
Signal
2. OPERATION MODE SELECTION
BUTTON
Used to select the operation mode.
transmitter
3. ROOM TEMPERATURE SETTING
BUTTONS
Used to select the room temperature.
4. INDOOR FAN SPEED SELECTOR
Used to select fan speed in four steps
low, medium, high and CHAOS.
5. JET COOL
Used to start
stop the speed
cooling. (Speed cooling operates
super
1
56
high
or
fan
speed
in
cooling mode.)
6. CHAOS SWING BUTTON
Used to stop or start louver movement and
set the desired up/down airflow direction.
3
7. ON/OFF TIMER BUTTONS
Used to set the time of starting and
427
stopping operation. (See
page 20)
8. TIME SETTING BUTTONS
Used to adjust the time. (See page
10
CANCEL
ON
9
SET
OFF
17
AUTO CLEAN
11
8
9. TIMER SET/CANCEL BUTTON
Used to set the timer when the desired time
is obtained and to cancel the Timer
12
13
operation. (See page 20)
14
15
20)
10. SLEEP MODE AUTO BUTTON
Used to set Sleep Mode Auto operation.
16
(See page 20)
11. AIR CIRCULATION BUTTON
Used to circulate the room air without
page 21)
12. ROOM TEMPERATURE CHECKING
BUTTON
Used to check the room temperature.
cooling
Flip-up door
(opened)
Operation
Operation
or
Auto
14. HORIZONTAL AIRFLOW DIRECTION
CONTROL BUTTON
(NOT ON ALL MODELS)
Used to set the desired horizontal airflow
direction. (See page 21)
Changeover
15. RESET BUTTON
Used prior to resetting time
replacing batteries.
Healthy Dehumidification Operation
Heating Operation
?
Cooling Model(
), Heat Pump Model(
heating. (See
13. NEO PLASMA(OPTIONAL)
Used to start or stop the plasmapurification function. (See page 18)
Mode
Cooling Operation
Auto
or
)
or
after
16. 2nd F Button
Used prior to using modes printed in blue
at the bottom of buttons. (See page 19)
17. AUTO CLEAN(OPTIONAL)
Used to set Auto Clean mode.
Owner's Manual
11
Operating
Instructions
Cooling Operation
Press the
1
Start/Stop button.
The unit will respond with
a beep.
2
Open the door on the remote control. To select Cooling
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the
Auto
Cooling
3
Close the door
lower than the
set within
a
arrow.
Healthy
Dehumidification
on
Heating
(Heat pump model only)
the remote control. Set the
room
temperature
temperature. The temperature can be
range of 18°C~30°Cin 1°C increments.
ON
To raise the temperature
To lower the temperature
4
Set the fan
with the door
speed again
of the remote control still closed. You
can
select the fan
speed
in four
steps-
low, medium, high and CHAOS.
Each time the button is
fan
Natural wind
For
more
by the
fresh
CHAOS
feeling
CHAOS mode. In this
speed according
12
the
mode is shifted.
logic
than other fan
mode,
press the Indoor Fan
the wind blows like natural breeze by
to the CHAOS
Room Air Conditioner
speed
pressed,
logic.
speed,
Speed Selector and set to
automatically changing fan
Operating
Auto
Instructions
Operation(Optional)
1
Start/Stop button.
The unit will respond with
a beep.
2
Open the door on
Operation, press
the remote control. To select Auto
the
Each time the button
Operation Mode Selection button.
is pressed, the operation mode is
shifted in the direction of the
Cooling
ON
3
ENGLISH
Press the
The
arrow.
Auto
Healthy
Dehumidification
temperature and fan speed
electronic controls based
on
are
Heating
(Heat pump model only)
automatically
the actual
room
set
by
the
temperature. If
change the set temperature, press the Room
Temperature Setting buttons. The cooler or warmer you feel,
the more times (up to two times) you should press the button.
The set temperature will be changed automatically.
you want to
To raise the temperature
To lower the temperature
During Auto Operation:
You cannot switch the indoor fan
already been set by the Fuzzy rule.
If the system is not operating as desired, manually switch to another mode. The system will not
automatically switch from the cooling mode to the heating mode, or from heating mode to cooling
mode, it must be done by manually resetting.
During Auto Operation, pressing the chaos swing button makes the horizontal louvers swing up and
down automatically. If you want to stop auto-swing, press the chaos swing button again.
speed.
It has
Owner's Manual
13
Operating
Instructions
Auto
Changeover Operation(Optional)
Press the
1
Start/Stop button.
The unit will respond with
a beep.
2
Open the door on the remote control. To select Auto Changeover
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is shifted in the
direction of the
arrow.
Auto
Cooling
3
changeover
Close the door
on
lower than the
room
set within
a
Healthy
Dehumidification
Heating
(Heat pump model only)
the remote control. Set the
temperature
temperature. The temperature can be
range of 18°C~30°Cin 1°C increments.
ON
To raise the temperature
To lower the temperature
4
Set the fan
with the door
speed again
of the remote control still closed. You
can
select the fan
speed
in four
steps-
low, medium, high and CHAOS.
Each time the button is
fan
speed
pressed,
the
mode is shifted.
During Auto changeover Operation:
The air conditioner
automatically to keep indoor temperature. When
temperature vary over ±2°C with respect to setting temperature, air conditioner keeps the
temperature in ±2°C with respect to setting temperature by auto changeover mode.
14
changes
the
Room Air Conditioner
operation
mode
room
room
Operating
Healthy
Dehumidification
Instructions
Operation
ENGLISH
Press the
Start/Stop button.
The unit will respond with
a beep.
1
2
Open
the door
on
the remote control. To select
Dehumidification
Operation,
press the
Healthy
Operation Mode
Selection button.
Each time the button is
pressed,
shifted in the direction of the
3
Set the fan
speed again
operation
mode is
arrow.
Auto
Cooling
the
Healthy
Heating
Dehumidification
(Heat pump model only)
with the door
of the remote control still closed. You
select the fan
speed in four stepslow, medium, high, or CHAOS. Each
time the button is pressed, the fan
speed mode is shifted.
can
ON
Natural wind by the CHAOS
For
press the Indoor Fan
Selector and set to CHAOS mode. In this mode, the wind
more
Speed
fresh
logic
feeling
than other fan
speed,
blows like natural breeze
according
to the CHAOS
by automatically changing
logic.
fan
speed
During Healthy Dehumidification Operation:
If you select the dehumidification mode on the operation selection button, the A/C starts to run the
dehumidification function. It automatically sets the room temp. and airflow volume to the best condition
for
dehumidification, based
on
In this case, however, the setting
control the room temp. either.
the sensed current
temp. is
not
room
displayed
temp.
in the remote control and you
are
not able to
During the healthy dehumidification function, the airflow volume is automatically set according to the
optimization algorithm responding to the current room temp. status which makes the room condition
healthy and comfortable even in the high humidity season.
Owner's Manual
15
Operating
Instructions
model
Heating Operation(Heat pump
only)
Press the
1
Start/Stop button.
The unit will respond with
a beep.
2
Open the door on the remote control. To select Heating
Operation, press the Operation Mode Selection button.
Each time the button is pressed, the operation mode is
shifted in the direction of the
Auto
Cooling
3
Close the door
arrow.
Healthy
Dehumidification
on
Heating
(Heat pump model only)
the remote control.
Set the
temperature higher than the room temperature.
The temperature can be set within a range of 16°C~30°Cin
1°C increments.
ON
To raise the temperature
To lower the temperature
4
Set the fan
speed again
with the door of the
remote control still closed. You
the fan
speed
in four
can
select
steps--low, medium,
high and CHAOS. Each time the button
pressed, the fan speed mode is shifted.
Natural wind
For
more
by the
fresh
CHAOS
feeling
CHAOS mode. In this
speed according
16
logic
than other fan
mode,
press the Indoor Fan
the wind blows like natural breeze by
to the CHAOS
Room Air Conditioner
is
logic.
speed,
Speed Selector and set to
automatically changing fan
Operating
Jet Cool
Instructions
Operation
ENGLISH
Press the
Start/Stop button.
The unit will respond with
a beep.
1
Press the Jet Cool button to
2
the
speed cooling
will
operate in super high fan speed
on
3
operate
cooling
mode and the unit
mode for 30 minutes.
To cancel the Jet Cool
mode, press the Jet Cool button or
the fan speed button or the room temperature setting button
again and the unit will operate in high fan speed on cooling
mode.
or
or
During the JET COOL function at any moment, the A/C starts to blow the cool air at
extremely high speed for 30 minutes setting the room temp. automatically to 18°C. It is
especially used to cool the room temp. in the shortest time in a hot summer.
In heat pump mode
or neuro
fuzzy mode, however,
In order to return to the normal
the JET COOL function is not available.
mode from the JET COOL
mode, you just press
either the operation mode selection button, airflow volume selection or temp. setting
button
or
the JET COOL button
cooling
again.
Owner's Manual
17
Operating
Instructions
NEO PLASMA Purification
Operation(Optional)
Press the
1
Start/Stop button.
The unit will respond with a
beep.
2
Open
the door
on
the remote control.
Press the PLASMA air
purifying
operation ON/OFF button.
Operation will start when the button is
pressed and stop when the button is
pressed again.
3
Set the fan
closed. You
speed again
can
with door of the remote control
select the fan
speed
in four
steps-low, medium, high or CHAOS.
Each time the button is pressed, the fan
speed mode is shifted.
Air
purifying operation (PLASMA) can be
cooling, Heating or any other operations.
PLASMA Air
with
Purifying Operation only
If you press the only PLASMA button,
PLASMA air purifying operates.
only
Then, fan speed is low. You can select the fan
speed in four steps-low, medium, high or
CHAOS.
Each time the button
speed
18
Room Air Conditioner
(
mode is shifted.
)
is
pressed,
the fan
Operating
2nd F
Instructions
Operation
1
2
ENGLISH
Press the
Start/Stop button.
The unit will respond with
a beep.
the door of the remote control and press the 2nd
Function button to operate functions printed in blue at bottom
Open
of buttons.
(Check the
display.)
indication of 2nd function
These buttons
on
operate the timer setting
remote control
as
follows:
CANCEL
ON
OFF
SET
CANCEL
ON
SET
OFF
AUTO CLEAN
3
2nd function goes off in a short time
the button is pressed again.
automatically
or
when
For more details, refer to functions next page.
Auto
-Clean(Optional)
AUTO CLEAN
1. Whenever you press the Auto Clean button, Auto Clean Function will be reserved and cancelled.
2. Auto Clean function works before and after cooling or dehumidification mode. For details, refer to the
below
points.
3. When the unit is started after the reservation of Auto Clean
,the Cool Start function operates and indoor
Fan is started after 20 seconds.
4. When you press Start/Stop button to turn off the unit after the you have reserved Auto Clean function, the
air-conditioner circulates the indoor air in the Auto Clean mode with no more Cooling or Dehumidification
operation.
For Cooling only model,
it lasts for 30 minutes for Heat pump model, for 16 minutes.
5. If you press the auto clean button again during the product operation Auto Clean function will be
cancelled.
,
This function is to
to
remove
unpleasant smells from mold and other bacteria in the air-conditioner, and
humidity automatically during humidly summer, which supplies the indoor with purified air.
remove
Owner's Manual
19
Instructions
Operating
Additional features
Mode
Sleep
time you want the unit to turn off
press the sleep
Mode Auto button several times until the star
automatically.
(
1. Press the
Sleep
To cancel the
Mode Auto button to set the
programmed in one-hour
by pressing the Sleep Mode
Sleep Mode,
) disappears
from the
operation display.
2. The Timer is
increments
Auto
button 1 to 7 times.
The
sleep
The
Sleep Mode will be operated at slow
fan speed (cooling) or medium fan speed
(heat pump only) for quiet sleeping.
mode is available for 1 to 7 times.
To alter the time
period
in
steps of
press the Sleep Mode Button while
air conditioner.
1
hour,
at
aiming
IN COOLING MODE OR HEALTHY
DEHUMIDIFICATION MODE:
3. Make
sure
the
Sleep
Mode Auto LED
The
lights
over
up.
temperature will automatically rise by 1°C
the next 30 minutes and
for comfortable
Setting
Time
2°C in 1 hour
sleeping.
the Time
you have pressed
the Reset button. If you have just replaced the
batteries, the Reset button should be pressed to
can
by
be set
only when
3. Press the Time
Setting
buttons until the
desired time is set.
reset the time.
1. Press the
Start/Stop
button.
4. Press the Timer SET button.
CANCEL
SET
2. Press 2nd F button
and check if 2nd F icon is
on.
Check the indicator for A.M. and P.M.
Delay Start/Pre-Set Stop
1. Make
sure
the time is set
remote control
correctly
on
the
5. To set the selected
CANCEL
time,
press the Timer SET button while
aiming the remote control at the signal
display.
2. Press 2nd F button.
SET
receptor.
3. Press the ON/OFF Timer
buttons to turn Timer
4. Press the Time
on or
off.
ON
OFF
To cancel the timer
CANCEL
Setting
Check if 2nd F icon is off.
Press the Timer Cancel button while
buttons until the desired
ET
time is set.
aiming
remote control at the
timer
and the
one
of the
following
four
lamp on the air conditioner
display will go out.)
types of operation.
with the unit
Delay
20
OFF Timer
signal
receptor.
(The
Select
setting
Delay
Room Air Conditioner
ON Timer
Delay
OFF and ON Timer
running
Delay
ON and OFF Timer
Instructions
Operating
Vertical Airflow Direction Control
The
up/down airflow (Vertical Airflow)
adjusted by using the remote control.
can
ENGLISH
be
If you press the CHAOS swing button, the horizontal
airflow direction is changed automatically based on the
CHAOS
1. Press the
algorithm to distribute the air in the room evenly
and at the same time to make the human body feel most
comfortable, as if enjoying a natural breeze.
Always use the remote control to adjust the up/down
airflow direction. Manually moving the vertical airflow
direction louver by hand could damage the air
button to start the unit.
Start/Stop
conditioner.
When the unit is shut
2.Open
the door
Press Chaos
on
off, the up/down airflow direction
louver will close the air outlet vent of the system.
the remote control.
Swing
To
button and the louvers will
up and down. Press the Chaos Swing
button again to set the vertical louver at the
adjust left/right(Horizontal Airflow) direction
swing
Ensure unit is turned off before
desired airflow direction.
adjusting the
horizontal airflow
direction control.
Carefully open
vertical louver to
allow
access
to the horizontal airflow direction.
Adjust the left/right
Horizontal Airflow Direction Control
The
left/right(Horizontal Airflow) can be adjusted by using
Press the Start/Stop button to start the unit.
Open the door on the
Start/Stop button and
airflow direction
by
hand.
(Optional)
the remote control.
remote control. Press the Airflow Direction
the louvers will
swing
left and
the Horizontal Airflow Direction Control Button
again
right.
Press
to set the
horizontal louver at the desired airflow direction.
Air Circulation Mode
Circulates the
1. Press the
2.
Open
air without
room
Start/Stop
the door
on
cooling
button. the
heating.
unit will respond
or
with
a
beep.
the remote control. Press the Air Circulation button. Close the door
remote control. Now each time that you press the Indoor Fan
shifted from low to CHAOS and back to low again.
CHAOS Air
Fan
speed
is
on
low.
Fan
speed
is
on
Speed Selector,
medium.
CHAOS Air economizes power consumption and prevents overcooling. The fan
from high to low or vice versa, depending on the ambient temperature.
Fan
speed
speed
is
is
the fan
on
on
the
speed
is
high.
automatically changed
Owner's Manual
21
Operating
Instructions
The Button
Operation
FORCED OPERATION
The
operation
pressed.
will be started if the power button is
If you want to
stop operation, re-press the button.
FORCED
OPERATION
Cooling
Heat pump Model
Model
Room Temp. ≥ 24°C2 1 °C ≤ Room Temp.
Operating
mode
Cooling
Cooling
Indoor FAN
Speed
High
High
Setting Temperature
Healthy
<
24°C
Dehumidification
Healthy Dehumidification
Rule
case
the power
comes on
again
after
a
power
failure, Auto
Restarting Operation is the function to operate procedures
automatically to the previous operating conditions.
If you want to use this operation, press the Auto Restart
Button.
AUTO
RESTART
Helpful information
Fan
speed and cooling capacity.
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity will
be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool the
room quickly.
22
Temp. < 21°C
Heating
High
22°C2 2 °C2 3 °C2 4 °C
Auto restart
In
Room
Room Air Conditioner
High
Speed
Maintenance and Service
Maintenance and Service
CAUTION: Before performing any
maintenance,
turn off the main power to the
system.
Indoor Unit
Never
Grille, Case, and Remote Control
Turn the
off before
clean,
system
cleaning.
wipe with a soft, dry cloth. Do not use bleach or
any of the
ENGLISH
followings:
Water hotter than 40°C
?
To
use
Could
deformation and/or
cause
discoloration.
abrasives.
Volatile substances
?
Could
the surfaces of the air
damage
conditioner.
Supply power must be disconnected
cleaning the indoor unit.
before
Powder
Gasoline
Air filters
(behind front panel)
Vertical louver Horizontal louver
Air inlet vent Air outlet vent
1. Lift the front
slightly
access
forward to
panel
remove
2. Clean the filter with
AIR FILTER
The air filters behind the front
checked and cleaned
once
grille
pull
the filter tab
the filter.
a vacuum or
warm, soapy
water.
should be
every 2 weeks
and
?
or more
often if neccessary.
?
If dirt is
conspicuous, wash with a solution
of detergent in lukewarm water.
If hot water (40°C or more) is used, it may
be deformed.
3. After
washing
with water,
dry
well in the shade.
4. Re-install the air filter.
30k/32k
36K/38k
1. After
NEO PLASMA FILTER, TRIPLE
DEODORIZING FILTER(OPTIONAL)
to
The NEO PLASMA filter behind the air filters should
be checked and cleaned
more
once
in every 3 months
remove
the air
(You
filters, pull slightly forward
the NEO PLASMA filter.
2. Remove dust with
or
often if necessary.
removing
should not
vacuum
try
cleaner
to wash with
3. Note the cuts of electric
or
air.
water).
discharge
lines.
4. Re-install the NEO PLASMA filter to the
original
position.
1. After
to
TRIPLE DEODORIZING Filter
2.
NEO PLASMA Filter
removing
remove
Dry
in the
the air
filters, pull slightly forward
the TRIPLE DEODORIZING filter.
sunlight
for two hours.
3. Re-install the TRIPLE DEODORIZING filter to
the
original position.
Don't touch this PLASMA Filter within 10 seconds
after
opening
the inlet
grille,
it may
cause an
electric shock.
Owner's Manual
23
Maintenance and Service
Replacement of Purifying Filter(Option)
?
Recomended
1.
Open
use
front
period
panel
:
About 2 years
and
air filters.
remove
2. Remove air
3. Insert
new
purifying
air
filters.
purifying
filters.
2
3
Air filter
Air filter
4. Reinsert air filters and close front
panel.
2
3
Triple Deodorizing
Filter
Outdoor Unit
The heat
exchanger coils
and
panel
vents of
(Side)
the outdoor unit should be checked
regularly.
If clogged with dirt or soot, the heat exchanger
and panel vents may be professionally steam cleaned.
(Rear)
Air intake
vents
Piping
Air outlet
vents
Dirty or clogged coils will reduce the
operating efficiency of the system and
operating costs.
cause
higher
(Side)
(Rear)
Air intake
vents
Air outlet
vents
24
Room Air Conditioner
Piping
Maintenance and Service
When the air conditioner is not going to be used for a
When air conditioner is not
1.
the air conditioner
Operate
?
This will
dry
on
to be used for
going
Air circulation mode
long time.
(Refer to page 18)
a
long
time.
ENGLISH
for 2 to 3 hours.
out the internal mechanisms.
2. Turn off the circuit breaker, and disconnect the
plug.
Turn off the circuit breaker when the air conditioner is not
Dirt may collect and may
cause a
going
to be used for
a
time.
long
fire.
3. Remove the batteries from the remote control.
When the air conditioner is to be used
1. Clean the air filter and install it in the indoor
unit.(Refer to page
2. Check that the air inlet and outlet of the indoor/outdoor unit
are
again.
20 for
cleaning filters.)
not blocked.
Operation Tips
Do not overcool the
room.
Keep
blinds
or
curtains
and
good for your
wastes electricity.
health
Do not let direct sunshine enter
Adjust the
the
airflow direction to
room
when the air
conditioner is in
Make
sure
that the doors
and windows
Avoid
opening
windows
to
as
keep the
are
shut
much
as
Clean the air filter
room.
temperature
regularly.
uniform
vertical and horizontal
ensure a
temperature in the
Ventilate the
room.
room
occasionally.
Blockages
possible
cool air in the
operation.
tight.
doors and
room
uniform.
closed.
This is not
Keep the
in the air filter
reduce the airflow and lower
cooling
and
dehumidifying
effects. Clean at least
once
Since windows
it is
are
kept closed,
idea to open them
and ventilate the room now and
a
good
then.
every two weeks.
Owner's Manual
25
Maintenance and Service
Troubleshooting
Check the
following points
contact your dealer
or
before
requesting repairs
?
operate.
?
a
See page
Have you made a mistake in timer operation?
Has the fuse blown or has the circuit breaker
been
has
persists, please
Explanation
The air conditioner does not
room
service.... If the fault
service center.
Case
The
or
peculiar
?
odor.
tripped?
-
Check that this is not
the
20
a
damp
walls, carpet, furniture,
or
smell exuded
by
cloth items in the
-
room.
It
is
seems
that condensation
leaking
?
from the air
Condensation
occurs
when the airflow from
the air conditioner cools the
warm room
air.
-
conditioner.
Air conditioner does not
?
This is the
operate for about
?
Wait about three minutes and
3 minutes
when restarted.
Does not cool
or
protector of the mechanism.
operation
will
begin.
heat
?
Is the air filter
dirty?
See air filter
cleaning
23
instructions.
effectively.
?
Has the
temperature been
?
Are the indoor unit's air inlet
set
or
incorrectly?
The air conditioner
is
?
For
a
-
noise that sounds like water
-This is the sound of freon
noisy.
13, 17
outlet vents
obstructed?
operation
-
flowing
flowing.
inside the
air conditioner unit.
?
For
air
a
noise that sounds like the
compressed
into
atmosphere.
-This is the sound of the dehumidifying water
being processed inside the air conditioning
releasing
-
unit.
Remote control
faint,
or no
is
display
display at all.
?
Are the batteries
?
Are the batteries inserted in the
and
Crack sound is heard.
26
?
(-)
depleted?
opposite (+)
10
directions?
This sound is
generated by the
expansion/constriction of the front panel,
due to changes of temperature.
Room Air Conditioner
etc.
-
Download PDF

advertising