LG | TSUC096YDA1 | LG TSNC096YDA1 Owner’s Manual

ENGLISH ESP
OWNER’S MANUAL
AIR
CONDITIONER
OWNER’S MANUAL
AIR CONDITIONER
Please read this manual carefully before operating
your set and retain it for future reference.
TYPE : WALL MOUNTED
P/NO : MFL68266601
www.lg com
2
TIPS FOR SAVING ENERGY
ENGLISH
TIPS FOR SAVING ENERGY
Here are some tips that will help you minimize the power consumption when you use the air
conditioner. You can use your air conditioner more efficiently by referring to the instructions
below:
• Do not cool or heat excessively indoors. This may be harmful for your health and may consume more electricity.
• Do not wait till the temperature become very high (In summer) or very low (In winter). Turn
on air conditioner before temperature becoming too high or low.
• Prefers to be the lowest (or highest) temperature which adjusted via the controller unit at
cooling (or heating) mode is 20 (or 28) degrees Celsius.
• Block sunlight with blinds or curtains while you are operating the air conditioner.
• Keep doors or windows closed tightly while you are operating the air conditioner.
• Adjust the direction of the air flow vertically or horizontally to circulate indoor air.
• Speed up the fan to cool or warm indoor air quickly, in a short period of time.
• Open windows regularly for ventilation as the indoor air quality may deteriorate if the air conditioner is used for many hours.
• Clean the air filter once every 2 weeks. Dust and impurities collected in the air filter may
block the air flow or weaken the cooling / dehumidifying functions.
• Do not place obstacles around product to maintain the efficiency and the necessary amount
of air flow.
For your records
Staple your receipt to this page in case you need it to prove the date of purchase or for warranty
purposes. Write the model number and the serial number here:
Model number :
Serial number :
You can find them on a label on the side of each unit.
Dealer’s name :
Date of purchase :
SAFETY PRECAUTIONS
3
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
Always comply with the following precautions to avoid dangerous situations and ensure peak
performance of your product
! WARNING
It can result in serious injury or death when the directions are ignored
! CAUTION
It can result in minor injury or product damage when the directions are ignored
! WARNING
• Always use a power plug and socket with a ground terminal. There is a risk of electric shock.
• Do not use a defective or underrated circuit breaker. Use the correctly rated breaker and fuse. There
is risk of fire or electric shock .
• Do not use a multi consent. Always use this appliance on a dedicated cicuit and breaker. Otherwise it
can cause electric shock or fire.
• For electrical work, contact the dealer, seller, a qualified electrician, or an Authorized Service Center.
Do not disassemble or repair the product by yourself. There is risk of fire or electric shock.
• Always ground the product as per the wiring diagram. Do not connect the ground wire to gas or water
pipes lightening rod or telephone ground wire. There is risk of fire or electric shock.
• Install the panel and the cover of control box securely. There is risk of fire or electric shock due to
dust , water etc.
• Use the correctly rated breaker or fuse. There is risk of fire or electric shock.
• Do not modify or extend the power cable. If the power cable or cord has scrathes or skin peeled off or
deteriorated then it must be replaced. There is risk of fire or electric shock.
• For installation, removal or reinstall , always contact the dealer or an Authorized Service Center. There
is risk of fire, electric shock, explosion, or injury.
• Do not install the product on a defective installation stand. Be sure that the installation area does not
deteriorate with age. It may cause product to fall.
• Never install the outdoor unit on a moving base or a place from where it can fall down. The falling
outdoor unit can cause damage or injury or even death of a person.
• When the product is soaked (flooded or submerged) in water , contact an Authorized Service Center
for repair before using it again. There is risk of fire or eletric shock.
• In outdoor unit the step-up capacitor supplies high voltage electricity to the electrical components. Be
sure to discharge the capacitor completely before conducting the repair work. An charged capacitor
can cause electrical shock.
• When installing the unit, use the installation kit provided with the product. Otherwise the unit may fall
and cause severe injury.
• Be sure to use only those parts which are listed in the svc parts list. Never attempt to modify the equipment. The use of inappropriate parts can cause an electrical shock, excessive heat generation or fire.
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
4
SAFETY PRECAUTIONS
ENGLISH
• Indoor/outdoor wiring connections must be secured tightly and the cable should be routed properly
so that there is no force pulling the cable from the connection terminals. Improper or loose connections can cause heat generation or fire.
• Safely dispose off the packing materials. Like screws, nails, batteries, broken things etc after installation or svc and then tear away and thraw away the plastic packaging bags. Children may play with
them and cause injury.
• Make sure to check that the power cable plug is not dirty, loose or broken and then only insert the
plug completely. Dirty, loose or broken power plug can cause electric shock or fire.
• Be sure to check the refrigerant to the used. Please read the label on the product. Incorrect refrigerant
used can prevent the normal operation of the unit.
• Don't use a power cord, a plug or a loose socket which is damaged. Otherwise it may cause a fire or
electrical shock.
• Do not touch , operate, or repair the product with wet hands. Hold the plug by hand when taking out.
There is risk of electric shock or fire.
• Do not place a heater or other heating appliances near the power cable. There is risk of fire and electric shock.
• Do not allow water to run into electric parts. Install the unit away from water sources. There is risk of
fire, failure of the product, or electric shock.
• Do not store or use or even allow flammable gas or combustibles near the product. There is risk of fire.
• Do not use the product in a tightly closed space for a long time. Perform ventilation regularly. Oxygen
deficiency could occur and hence harm your health.
• Do not open the front grille of the product during operation. (Do not touch the electrostatic filter, if
the unit is so equipped.) There is risk of physical injury, electric shock, or product failure.
• If strange sounds, smell or smoke comes from product.Immediately turn the breaker off or disconnect
the power supply cable. There is risk of electric shock or fire.
• Ventilate the product room from time to time when operating it together with a stove, or heating element etc. Oxygen deficiency can occur and hence harm your health.
• Turn the main power off and unplug the unit when cleaning or repairing the product. There is risk of
electric shock.
• When the product is not to be used for a long time, disconnect the power supply plug or turn off the
breaker. There is risk of product damage or failure, or unintended operation.
• Take care to ensure that nobody especially kids could step on or fall onto the outdoor unit. This could
result in personal injury and product damage.
• Take care to ensure that power cable could not be pulled out or damaged during operation. There is
risk of fire or electric shock.
• Do not place ANYTHING on the power cable. There is risk of fire or electric shock.
• Do not plug or unplug the power supply plug to turn the unit ON/OFF . There is risk of fire or electric
shock.
• When flammable gas leaks, turn off the gas and open a window for ventilation before turn the product
on. Do not use the telephone or turn switches on or off. There is risk of explosion or fire.
• For inner cleaning, contact an Authorized Service Center or a dealer. Do not use harsh detergent that
causes corrosion or damage on the unit. Harsh detergent may also cause failure of product, fire, or
electronic shock.
SAFETY PRECAUTIONS
5
• Do not install the product where it will be exposed to sea wind (salt spray) directly. It may cause corrosion on the product.
• Install the drain hose to ensure that the condensed water is drained away properly. A bad connection
may cause water leakage.
• Keep level even when installing the product. To avoid vibration or noise.
• Do not install the product where the noise or hot air from the outdoor unit could damage or disturb
the neighborhoods. It may cause a problem for your neighbors and hence dispute.
• Always check for gas (refrigerant) leakage after installation or repair of product. Low refrigerant levels
may cause failure of product.
• Do not use the product for special purposes, such as preserving foods, works of art, etc. It is a consumer air conditioner, not a precision refrigeration system. There is risk of damage or loss of property.
• Do not block the inlet or outlet of air flow. It may cause product failure.
• Use a soft cloth to clean. Do not use harsh detergents, solvents or splashing water etc. There is risk
of fire, electric shock, or damage to the plastic parts of the product.
• Do not touch the metal parts of the product when removing the air filter. There is risk of personal injury.
• Do not step on or put anyting on the product. (outdoor units) There is risk of personal injury and failure
of product.
• Always insert the filter securely after cleaning. Clean the filter every two weeks or more often if necessary. A dirty filter reduces the efficiency.
• Do not insert hands or other objects through the air inlet or outlet while the product is operating.
There are sharp and moving parts that could cause personal injury.
• Be cautious when unpacking and installing the product. Sharp edges could cause injury.
• If the refrigerant gas leaks during the repair, do not touch the leakaing refrigerant gas. The refrigernat
gas can cause frostbite (cold burn)
• Do not tilt the unit when removing or uninstalling it. The condensed water inside can spill .
• Do not mix air or gas other than the specified refrigerant used in the system. If air enters the refrigerant system, an excessively high pressure results, causing equipment damage or injury.
• If the refrigerant gas leaks during the installation, ventilate the area immediately. Otherwise it can be
harmfull for your health.
• Dismantling the unit, treatment of the refrigerant oil and eventual parts should be done in accordance
with local and national standards. Replace the all batteries in the remote control with new ones of the
same type. Do not mix old and new batteries or different types of batteries. There is risk of fire or
product failure.
• Do not recharge or disassemble the batteries. Do not dispose off batteries in a fire. They may burn or
explode.
• If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not
use the remote if the batteries have leaked. The chemicals in batteries could cause burns or other
health hazards.
• Do not let the air conditioner run for a long time when the humidity is very high and a door or a window is left open. Moisture may condense and wet or damage furniture.
• Do not expose your skin or kids or plants to the cool or hot air draft. This could harm to your health.
• If you eat the liquid from the batteries, brush your teeth and see doctor. Do not use the remote if the
batteries have leaked. The chemicals in batteries could cause burns or other health hazards.
• Do not drink the water drained from the product. It is not sanitary and could cause serious health issues.
• Use a firm stool or ladder when cleaning, maintaining or repairing the product at an height. Be careful
and avoid personal injury.
ENGLISH
! CAUTION
• Two or more people must lift and transport the product. Avoid personal injury.
6
TABLE OF CONTENTS
ENGLISH
TABLE OF CONTENTS
2 TIPS FOR SAVING ENERGY
14 ADVANCED FUNCTIONS
14
Changing room temperature quickly
14
Display screen brightness
14
Energy saving cooling mode
15
Forced operation
7 Electrical Safety
15
Auto Restart Function
7
Temporary Use of an Adapter
7
Temporary Use of an Extension Cord
16 MAINTENANCE
7
Symbols used in this Manual
3 IMPORTANT SAFETY INSTRUCTIONS
16
Indoor Unit
18
Outdoor Unit
8 BEFORE USE
18
Operation Tips!
8
Components
10
Using the remote control
19 TROUBLESHOOTING
12 BASIC FUNCTIONS
12
Cooling your room
12
Heating your room
12
Removing humidity
13
Airing your room
13
Adjusting the fan speed
13
Adjusting the air flow direction
13
Setting sleep mode
19
Self-diagnosis function
19
Before requesting service
20
Call the service immediately in the following situations
20
Operation ranges
Electrical Safety
7
! WARNING
• This appliance must be properly grounded. To minimize the risk of electric shock, you must always
plug into a grounded outlet.
• Do not cut or remove the grounding prong from the power plug.
• Attaching the adapter ground terminal to the wall receptacle cover screw does not ground the appliance unless the cover screw is metal and not insulated, and the wall receptacle is grounded through
the house wiring.
• If you have any doubt whether the air conditioner is properly grounded, have the wall receptacle and
circuit checked by a qualified electrician.
Temporary Use of an Adapter
We strongly discourage the use of an adapter due to potential safety hazards. For temporary connections, use only a genuine adapter, available from most local hardware stores. Ensure that the
large slot in the adapter is aligned with the large slot in the receptacle for a proper polarity connection.
To disconnect the power cord from the adapter, use one hand on each to avoid damaging the
ground terminal. Avoid frequently unplugging the power cord as this can lead to eventual ground
terminal damage.
! WARNING
• Never use the appliance with a broken adapter.
Temporary Use of an Extension Cord
We strongly discourage the use of an extension cord due to potential safety hazards.
! WARNING
• This appliance should be installed in accordance with national wiring regulations.
This guide acts as a guide to help to explain product features.
Symbols used in this Manual
This symbol alerts you to the risk of electric shock.
!
This symbol alerts you to hazards that may cause harm to the air conditioner.
!
This symbol indicates special notes.
ENGLISH
Electrical Safety
8
BEFORE USE
ENGLISH
BEFORE USE
Components
Indoor unit
Air inlet
Grille tab
Plasma filter (Optional)
Front grille
ON/OFF button
Air filter
Air outlet
Louvers
(Vertical blades)
Signal
receiver
Flap
(Horizontal blade)
* The feature can be changed according to type of model.
!
NOTE
The number of operation lamps and their locations may vary, depending on the model of the
air conditioner.
Operation Indication Lamps
On/Off
Sleep mode
Lights up during the system operation, error code and auto restart
setting.
Lights up during sleep mode auto operation.(non-Inverter Model)
Energy-Saving Lights up during Energy-Saving Cooling Mode Operation(Inverter
Cooling Mode Model only)
The function illustrates its dynamic mode by using a multiple lighting
Plasma
system.
Lights up during timer operation.(non-Inverter Model)
Timer
Lights up during timer operation or sleep mode auto operation
(Inverter Model only)
Lights up during defrost mode or *hot start operation (Heat pump
Defrost mode
model only)
Outdoor unit
Lights up during outdoor unit operation. (Cooling model only)
operation
Power
Indicates the setting temperature and operation mode.
Display
BEFORE USE
Shape of
display
Setting
temperature
EnergyJet Cool/ saving
Test
Auto
Too cold Heat cooling operation clean
mode
A1 -2 -1 0 1 2 PO EO LO CO
* Hot start operation: Stops the indoor fan in heating operation for minutes to prevent cold air
from blowing out from unit.
* In defrost mode unit stops heating operation for few minutes to remove formation of ice on the
heat exchanger coils to maintain the efficiency.
Outdoor unit
Air intake vents
Connecting
wires
Refrigerant pipes
Air outlet vents
Base plate
* The feature can be changed according to type of model.
Drain hose
ENGLISH
Auto operation mode
Opera- Cooling, heating,
tion Dehumidification
ComfortStandard Too hot
Hot
Cold
mode
Mode
able
9
10 BEFORE USE
ENGLISH
Using the remote control
You can operate the air conditioner more conveniently with the remote control.
Wireless
Wireless remote
remote control
control
Control
panel
Display
screen
Display
screen
Description
-
On/Off button: Turns the power on/off.
Temperature adjustment buttons: Adjusts the room temperature when cooling.
MODE
JET
MODE
FAN
SPEED
Control
panel
MODE
Operation mode selection button :
Selects the operation mode.
Cooling operation ( )
Dehumidifying operation ( )
Heating operation ( )
Air circulation ( )
JET
MODE
Jet cooling button: Cools down the indoor temperature within a short period
of time.
FAN
SPEED
Indoor fan speed button: Adjusts the
fan speed.
LIGHT [3SEC]
Operation Mode
Cooling Operation
-
Healthy Dehumidification
Operation
Sleep mode auto button* : Sets the sleep
mode auto operation.
Air Circulation
Cooling model
Operation Mode
Cooling Operation
Healthy Dehumidification
Operation
Heating Operation
Air Circulation
Heating model
Air flow direction button: Adjusts the air
flow direction vertically.
-
ENERGY SAVING COOLING BUTTON(OPTIONAL) : Used to save Energy.
* Some functions may not be supported, depending on the
model.
BEFORE USE
Insert batteries before using the remote
control. The battery type used is AAA (1.5 V).
1 Remove the battery cover.
2 Fix the holder by fastening the 2 screws
firmly with a screwdriver.
3 Slide the remote control into the holder.
2 Insert the new batteries and make sure
that the + and - terminals of the batteries
are installed correctly.
Operating method
3 Reattach the battery cover.
!
Point the remote control towards the signal
receiver at the bottom of the air conditioner to
operate it.
NOTE
If the display screen of the remote control
starts to fade, replace the batteries.
Installing the remote control holder
Install the holder where there is no direct sunlight to protect the remote control.
1 Choose a safe and easily-accessible place.
SLEEP
LIGHT [3SEC]
!
NOTE
• The remote control may operate other
electronic devices if pointed towards
them. Make sure to point the remote
control towards the signal receiver of
the air conditioner.
• For proper operation, use a soft cloth to
clean the signal transmitter and receiver.
ENGLISH
Inserting batteries
11
12 BASIC FUNCTIONS
ENGLISH
BASIC FUNCTIONS
Cooling your room
Removing humidity
(Cooling operation)
(Dehumidifying operation)
1 Press
2 Press
This mode removes excess moisture from an
environment with high humidity or in the rainy
season, in order to prevent mold from setting
in. This mode adjusts the room temperature
and the fan speed automatically to maintain
the optimal level of humidity.
1 Press
to turn on the power.
2 Press
repeatedly to select the dehumidifying operation.
- is displayed on the display screen.
to turn on the power.
repeatedly to select the cooling
operation.
- is displayed on the display screen.
MODE
MODE
3 Press
or
to set the desired temperature.
- The temperature range is 18°C (64°F) ~
30°C (86°F).
Heating your room
(Heating operation)
1 Press
2 Press
to turn on the power.
repeatedly to select the heating
operation.
is displayed on the display screen.
MODE
3 Press
or
to set the desired temperature.
- The temperature range is 16°C (60°F) ~
30°C (86°F).
!
NOTE
Cooling-only models do not support this
function.
!
NOTE
• In this mode you cannot adjust the room
temperature, as it is adjusted automatically. Also, the room temperature is not
displayed on the display screen.
BASIC FUNCTIONS 13
(Air Circulation operation)
This mode only circulates the indoor air
without changing the room temperature.
1 Press
to turn on the power.
2 Press
repeatedly to select the air circulation operation.
- is displayed on the display screen.
MODE
3 Press
FAN
SPEED
to adjust the fan speed.
Adjusting the air flow direction
1 To adjust the direction of the air flow vertically,
press change the air flow direction automatically.
!
NOTE
• Adjusting the air flow direction vertically
may not be supported, depending on
the model.
• Adjusting the air deflector arbitrarily may
cause product failure.
• If you restart the air conditioner, it starts
to operate with the previously set direction of air flow, so the air deflector may
not match the icon displayed on the remote control. When this occurs, press
to adjust the direction of the air flow
again.
Adjusting the fan speed
1 Press
repeatedly to adjust the fan
speed.
- Select
if you want natural air.
The fan speed adjusts automatically.
FAN
SPEED
Remark
Speed
High
Medium
Low
Natural Wind
Setting sleep mode
Use the sleep mode to turn off the air conditioner automatically when you go to sleep.
1 Press
to turn on the power.
2 Press
repeatedly to select the hour
you want to turn air conditioner off. (up to
7 hours)
is displayed on the display screen in
this mode.
!
NOTE
In the Cooling and Dehumidifying modes,
the temperature increases by 1°C after 30
minutes and by a further 1°C after another
30 minutes for a more comfortable sleep.
The temperature increases with up to 2°C
from the preset temperature.
ENGLISH
Airing your room
14 ADVANCED FUNCTIONS
ENGLISH
ADVANCED FUNCTIONS
The air conditioner offers some additional advanced functions.
Changing room temperature
quickly
(Jet Cool/Heat operation)
This mode allows you to cool indoor air
quickly in summer or warm it quickly in winter.
1 Press
to turn on the power.
2 Press
.
MODE
Energy saving cooling mode
This mode minimizes power consumption during cooling and increases the set temperature
to the optimal level for a more comfortable
environment.
The temperature automatically sets at
22°C(72°F) if ambient temperature is below
22°C(72°F).
The temperature maintains if ambient temperature is above 22°C(72°F).
1 Press
to turn the power on.
2 Press
repeatedly to select the cooling
operation.
3 Press
.
MODE
Display screen brightness
You can adjust the brightness of the indoor
unit display screen.
1 Press
(Hold 3 seconds) turn on/off
the Display screen.
!
NOTE
This function may not be supported,
depending on the model.
ADVANCED FUNCTIONS 15
Auto Restart Function
Operation procedures when the remote control can't be used. The operation will be
started if the ON/OFF button is pressed.
If you want to stop operation, re-press the
button.
This function is useful in the situation of
power failure.
When power regains after a failure this feature restore the previous operating condition
and the air conditioner will run in the same
settings.
!
ON/OFF
button
* The feature can be changed according to
type of model.
- For cooling and heating models, the operation mode changes, depending on the
room temperature.
Room temp.
Set temp.
Below 21°C
24°C
Above 21°C
And Below 24°C
23°C
Above 24°C
22°C
Operation
mode
Heating
operation
Dehumidifying
operation
Cooling
operation
- For cooling-only models, the temperature
is set to 22°C.
!
NOTE
Test operation
During the TEST OPERATION, the unit operates in cooling mode at high speed fan,
regardless of room temperature and resets in 18 minutes. During test operation,
if remote controller signal is received, the
unit operates as remote controller sets.
If you want to use this operation, Press
and hold the ON/OFF button for 3~5 seconds, then the buzzer sound 1 "beep".
If you want to stop the operation, re-press
the button.
NOTE
This feature is enabled by factory default
setting, but you can disable it by pressing
the ON/OFF button for 6 seconds. The
unit will beep twice and the indicator
lamp(2) will blink 4 times.
To enable it, press the button again for 6
seconds. The unit will beep twice and the
indicator lamp(1) will blink 4 times.
ENGLISH
Forced operation
16 MAINTENANCE
ENGLISH
MAINTENANCE
! CAUTION
Before performing any maintenance, turn
off the main power to the system, disconnect the circuit breaker and unplug the
power cord.
Clean the product regularly to maintain optimal performance and to prevent possible
breakdown.
* This may not be provided, depending on the
model.
Plasma Filters (Optional)
The plasma filters behind the air filter should
be checked and cleaned once in every 3
months or more often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the filters
with a vacuum cleaner. If it is dirty wash it
with water and dry well in shade an install
back in place.
Indoor Unit
! CAUTION
Never use any of these
• Water hotter than 40°C. It may cause deformation and discoloration.
• Volatile substances. They may damage
the surface of the air conditioner.
Air Filters
The air filters behind the front panel / grill
should be checked and cleaned once in every
2 weeks or more often if necessary. To remove the filters see the self explanatory diagrams for each model type. Clean the filters
with a vacuum cleaner or warm soapy water.
If dirt is not easily removed, wash with a solution of detergent in luke warm water. Dry well
in shade after washing and reinstall the filters
back in place.
Deodorizer Filters (Optional)
Remove the deodorizer filters behind the air
filter and expose them in direct sunlight for 2
hours.
And then insert these filters into original position.
MAINTENANCE 17
Two different methods to open the front panel
based on types of air conditioner as below ;
Type 1: Open the front panel as shown.
Then pull the filter tab slightly forward
to remove the air filter.
After removing the air filter remove
the plasma and deodorizer filter by
slightly pulling forward.
Type 2: Pull the front panel from both sides as
shown.
Then pull the filter tab slightly forward
to remove the filter. After removing
the air filter remove the plasma and
triple deodorizer filter by slightly
pulling forward.
Deodorizer
filter
Plasma filter
Deodorizer
filter
Plasma filter
* The feature can be changed according to
type of model.
* The feature can be changed according to
type of model.
! CAUTION
Don't touch this plasma filter within 10
seconds after opening the inlet grille,
it may cause an electric shock.
ENGLISH
Removal of Filters
18 MAINTENANCE
ENGLISH
Outdoor Unit
The heat exchanger coils and panel vents of the outdoor unit should be checked regularly.
If clogged with dirt or soot, the heat exchanger
and panel vents may be professionally steam cleaned.
!
NOTE
Dirty or clogged coils will reduce the operating efficiency of the system and cause higher
operating costs.
Operation Tips!
Do not overcool the room.
This is not good for the health
and wastes electricity.
Make sure that the
doors and windows
are shut tightly.
Avoid opening doors
and windows as much
as possible to keep
the cool air in the
room.
Keep blinds or curtains closed.
Do not let direct sunshine
enter the room when the air
conditioner is in operation.
Keep the room temperature
uniform.
Adjust the vertical and horizontal airflow direction to ensure a uniform temperature in
the room.
Clean the air filter reg- Ventilate the room oc- Use high fan speed
ularly.
casionally.
for effective and fast
cooling.
Blockages in the air fil- Since windows are
The unit gives its
ter reduce the airflow kept closed, it is a
rated cooling capacity
and lower cooling and good idea to open
when the fan speed is
dehumidifying effects. them and ventilate the high.
Clean at least once
room now and then.
every two weeks.
TROUBLESHOOTING 19
ENGLISH
TROUBLESHOOTING
Self-diagnosis function
This unit has an inbuilt error diagnosis capability. Unit LED(
) will blink in case if thermistor
fails. Please contact your serviceman/dealer in such a situation
Error Display LED (
(once)
3 sec
3 sec
3 sec
Check Point
)
- Indoor room temperature thermistor open/short.
- Indoor pipe temperature thermistor open/short.
Before requesting service
Please check the following before you contact the service center. If the problem persists, contact
your local service center.
Problem
Possible causes
Corrective action
The air conditioner is un- Check whether the power cord is plugged into
plugged.
the outlet.
A fuse is blown or the
Replace the fuse or check if the circuit breaker
power supply is blocked. has tripped.
The air conditioner A power failure has occurred.
does not work.
Turn off the air conditioner when a power failure
occurs. When the power is restored, wait 3 minutes, and then turn on the air conditioner.
The voltage is too high or
Check if the circuit breaker has tripped.
too low.
The air conditioner
turned off automatically
at a preset time.
Press the power button again.
Air is not circulating
properly.
Make sure that there are no curtains, blinds or
furniture blocking the front of the air conditioner.
The air filter is dirty.
Clean the air filter once every 2 weeks. See
“Cleaning Air Filter” for more information.
In summer, it may take some time to cool indoor
The room temperature is
air. In this case, select the jet cool operation to
too high.
cool indoor air quickly.
Cold air is escaping from
The air conditioner the room.
does not generate The desired temperature
cool air.
is higher than the set
temperature.
Make sure that no cold air is escaping through
ventilation points in the room.
Set the desired temperature to a level lower
than the current temperature.
Avoid using a heat generator such as an electric
There is a heating source
oven or a gas burner while the air conditioner is
nearby.
in operation.
Air circulation operation
is selected.
In the air circulation operation, air blows from the
air conditioner without cooling or heating the indoor air. Switch the operation mode to the cooling operation.
20 TROUBLESHOOTING
ENGLISH
Problem
Possible causes
Corrective action
It is not possible to adjust
the fan speed.
In some operation modes, such as the jet
The auto operation,
or dehumidifying operation modes, you
jet operation or dehucannot adjust the fan speed. Select an opmidifying operation is
eration mode in which you can adjust the
selected.
fan speed.
It is not possible to adjust
the temperature.
In some operation modes, such as the air
The air circulation op- circulation or jet operation mode, you caneration or jet operanot adjust the temperature. Select an option is selected.
eration mode in which you can adjust the
temperature.
Call the service immediately in the following situations
1 Anything abnormal such as burning smell, loud noise etc. happen. Stop the unit and turn the
2
3
4
5
breaker off. Never try to repair by yourself or restart the system in such cases.
Main power cord is too hot or damaged.
Error code is generated by self diagnosis.
Water leaks from indoor unit even if the humidity is low.
Any switch, breaker (safety, earth) or fuse fails to work properly
User must carry routine checkup & cleaning to avoid unit’s poor performance.
In case of special situation, the job must be carried out by service person only.
Operation ranges
For Heat & Cool model, heating operation range follows the below table.
Heating
operation range
Outdoor temperature
1 ~ 24 °C
* When the outdoor temperature drops below 1 °C, heating capacity may drop slightly depending
on the operation condition.
21
Download PDF