LG | 32LF15R | LG 26LF15R Owner’s Manual

ENGLISH
LCD TV
OWNER’S MANUAL
LCD TV MODELS
22LF15R
26LF15R
32LF15R
Please read this manual carefully before operating your
TV.
Retain it for future reference.
Record model number and serial number of the TV.
Refer to the label on the back cover and quote this
information.
To your dealer when requiring any service.
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the product.
■
ACCESSORIES
Image shown may differ from your TV.
Owner's
Manual
RA
TIO
Owner’s manual
Owner’s Manual
Batteries
Remote Control
Power Cord
*Lightly wipe any stains or
fingerprints on the surface
of the TV with the polishing
cloth.
Polishing Cloth
Polishing cloth for use
on the screen
This feature is not
available
for all models.
x4
Do not use excessive force.
This may cause scratching or
discolouration.
x4
Bolts for stand assembly
(Refer to p.7)
(Except for 22LF15R)
or
Screw for stand fixing
(Refer to p. 8)
(Except for 22LF15R)
Wall Mounting Bracket(Separate purchase)
RW120
RW230
(Only 22LF15R)
Cable Management Clip
(Refer to p. 10)
(Only 22LF15R)
(Only 26LF15R)
Protection Cover
(Refer to p. 13)
AW-47LG30M
(Only 32LF15R)
1
CONTENTS
A C C E S S O R I E S .....................................................1
CONTENTS
PREPARATION
Front Panel Controls................................................... 4
Back Panel Information .............................................. 5
Stand Installation..........................................................7
Careful Installation Adivice . . . . . . . . . . . . . . . . . . . .9
Back Cover for Wire Arrangement......................... 10
Swivel Stand................................................................ 11
Positioning your display ............................................11
Kensington Security System ....................................11
Desktop Pedestal Installation ................................. 12
Wall Mount: Horizontal installation....................... 12
Not using the desk-type stand................................13
Antenna Connection ................................................ 14
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup .......................................................15
DVD Setup..................................................................... 17
VCR Setup ..................................................................... 19
Headphone SETUP.......................................................21
Other A/V Source Setup .......................................... 22
External Stereo Setup..................................................23
AV Output Setup ........................................................ 24
Screen Setup ................................................................26
WATCHING TV / PROGRAMME CONTROL
Remote Control Key Functions ..................................28
Turning on the TV....................................................... 30
Programme Selection ................................................. 30
Volume Adjustment......................................................30
On Screen Menus Selection and Adjustment.......31
2
Auto Programme Tuning............................................ 32
Manual Programme Tuning ....................................... 33
Fine Tuning .....................................................................34
Assigning a Station Name ..........................................35
Booster............................................................................36
Programme Edit ........................................................... 37
Favourite Programme .................................................. 38
Selecting the Programme List .................................. 39
Key lock ......................................................................... 40
PICTURE CONTROL
Picture Size (Aspect Ratio)Control .........................41
Preset Picture Settings
- Picture Mode-Preset............................................43
- Auto Colour Tone Control(Cool/Medium/Warm)44
Manual Picture Adjustment
- Picture Mode-User Option................................45
- Colour Tone - User Option...............................46
- Picture Improvement Technology...................47
Advanced - Gamma......................................................48
Advanced - Film Mode ................................................49
Advanced - Black(Darkness) Level...........................50
Advanced - Eye Care ...................................................51
Picture Reset..................................................................52
Power Indicator ............................................................53
Factory Reset .................................................................54
SOUND & LANGUAGE CONTROL
Troubleshooting ............................................................71
Maintenance .................................................................73
Product Specifications ................................................74
IR Codes ....................................................................... 75
CONTENTS
Auto Volume Leveler ....................................................55
Preset Sound Settings - Sound Mode ....................56
Sound Setting Adjustment - User Mode ...............57
Balance ............................................................................58
TV Speakers On/Off Setup .......................................59
Selecting Audio Out....................................................60
I/II
- Stereo/Dual Reception ....................................... 61
- NICAM Reception ....................................................... 62
- Speaker Sound Output Selection.................... 62
On-Screen Menu Language Selection ...................... 63
APPENDIX
TIME SETTING
Clock Setup .....................................................................64
Auto On/Off Timer Setting .........................................65
Sleep Timer Setting .......................................................66
Auto Shut-off Setting...................................................67
TELETEXT
Switch On/Off .............................................................68
SIMPLE Text ...................................................................68
TOP Text .........................................................................69
FASTEXT .........................................................................69
Special Teletext Functions..........................................70
3
PREPARATION
FRONT PANEL CONTROLS
■
■
This is a simplified representation of the front panel. Image shown may differ from your TV.
If your product has a protection film attached, remove the film and then wipe the product with a polishing
cloth.
22LF15R
PREPARATION
MENU
OK
INPUT MENU
OK
INPUT
VOLUME
PROGRAMME
VOL
PR
POWER
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
26/32LF15R
P
PROGRAMME
+
VOLUME
-
OK
POWER
Remote Control Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in
the OPTION menu.
4
OK
MENU
MENU
INPUT
INPUT
BACK PANEL INFORMATION
A
Image shown may differ from your TV.
22LF15R
PREPARATION
1
2
3
HDMI IN
4
SERVICE ONLY
ANTENNA IN
AUDIO
H/P
AV IN
VIDEO
R
L
PB
Y
PR
L
R
VIDEO
AUDIO
COMPONENT IN
5
6
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
HDMI Input
Connect a HDMI signal to HDMI IN.
3
SERVICE ONLY PORT
4
Antenna Input
Connect RF antenna to this jack.
5
Audio/Video Input (AV IN)
Connect audio/video output from an external
device to these jacks.
7
6
Component Input
Connect a component video/audio device to
these jacks.
7
Headphone Input
Plug the headphone into the headphone socket.
5
PREPARATION
26/32LF15R
PREPARATION
1
3
2
IN
SERVICE ONLY
IN
AV
VIDEO
L(MONO) AUDIO
R
AUDIO
VIDEO
COMPONENT IN
OUT
ANTENNA
IN
VARIABLE
AUDIO OUT
4
6
5
1
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
2
HDMI Input
Connect a HDMI signal to HDMI IN.
3
SERVICE ONLY PORT
4
Audio/Video Input (AV IN)
Connect audio/video output from an external
device to these jacks.
5
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
Variable Audio Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
7
6
6
Component Input
Connect a component video/audio device to
these jacks.
7
Antenna Input
Connect RF antenna to this jack.
STAND INSTALLATION
■
■
Image shown may differ from your TV
When assembling the desk type stand, check whether the bolt is fully tightened. (If not tightened fully, thep
roduct can tilt forward after the product installation.) If you tighten the bolt with excessive force, the boltcan
deviate from abrasion of the tightening part of the bolt.
Stand Body
PREPARATION
22LF15R
Stand Base
1
Carefully place the TV screen side down on a cushioned surface to protect the screen from damage.
2
Assemble the parts of the S t a n d B o d y with S t a n d B a s e of the TV. Insert the S t a n d B o d y into a
S t a n d B a s e until clicking sound.
3
Assemble the TV as shown.
26/32LF15R
1
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
3
Assemble the TV as shown.
2
Assemble the parts of the S t a n d B o d y with
the S t a n d B a s e of the TV.
4
Fix the 4 bolts securely using the holes in the
back of the TV.
Stand Body
Stand Base
7
PREPARATION
Attaching the TV to a desk
(Except for 22LF15R)
PREPARATION
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing
injury or damaging the product. Use only an attached screw.
Stand
1-Screw
(provided as parts of the product)
Desk
! WARNING
G
8
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation
instructions. Tipping, shaking, or rocking the machine may cause injury.
CAREFUL INSTALLATION ADVICE
You should purchase necessary components to fix the TV safety and secure to the wall from a hardware supplier.
Position the TV close to the wall to avoid the possibility of it falling when pushed.
A The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoiding the possibility
of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
A
A
2
PREPARATION
1
1
2
1
Use the eye-bolts or TV brackets/bolts to fix the product to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with the bolts on the wall. Match the height of the bracket that is mounted on the
wall.
3
3
Use a sturdy rope or wire to tie the product for alignment. It is safer to tie the rope so it becomes horizontal between the wall and the product.
! NOTE
G
G
G
When moving the TV undo the cords first.
Use a platform or cabinet strong and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
9
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
■
Here shown may be somewhat different from your TV.
22LF15R
26/32LF15R
PREPARATION
1
Connect the cables as necessary.
2
Install the C A B L E M A N A G E M E N T C L I P as
shown.
To connect additional equipment, see the
External Equipment Setup section of the
manual.
1
Connect the cables as necessary.
2
Open the C A B L E M A N A G E M E N T C L I P as
shown and manage the cables.
To connect additional equipment, see the
External Equipment Setup section of the
manual.
CABLE MANAGEMENT CLIP
CABLE MANAGEMENT CLIP
3
Fit the C A B L E M A N A G E M E N T C L I P as
shown.
How to remove the CABLE MANAGEMENT CLIP
G
Hold the CABLE MANAGEMENT CLIP with both hands
and pull it backward.
! NOTE
Do not use the CABLE MANAGEMENT CLIP to lift the TV.
- If the TV is dropped, you may be injured or the TV may be damaged.
G
10
SWIVEL STAND (Except for 22LF15R)
POSITIONING YOUR
DISPLAY (Only 22LF15R)
■
■
• Tilt range
12 1.5
3
1.5
PREPARATION
After installing the TV, you can adjust the TV manually
to the left or right direction by 20 degrees to suit your
viewing position.
Image shown may differ from your TV.
Adjust the position of the panel in various ways for
maximum comfort.
KENSINGTON SECURITY SYSTEM (This feature is not available for all models.)
The TV is equipped with a Kensington Security System connector on the back panel. Connect the Kensington
Security System cable as shown below.
For the detailed installation and use of the Kensington Security System, refer to the user’s guide provided with
the Kensington Security System.
For further information, contact http://www.kensington.com, the internet homepage of the Kensington
company. Kensington sells security systems for expensive electronic equipment such as notebook PCs and LCD
projectors.
NOTE
- The Kensington Security System is an optional accessory.
NOTES
a. If the TV feels cold to the touch, there may be a small “flicker”
when when it is turned on.
This is normal, there is nothing wrong with TV.
b. Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no
adverse effect on the monitor's performance.
c. Avoid touching the LCD screen or holding your finger(s)
against it for long periods of time.
Doing so may produce some temporary distortion effects on
the screen.
11
PREPARATION
A
A
The TV can be installed in various ways such as on
a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
EARTHING
PREPARATION
Ensure that you connect the earth wire to prevent
possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate
circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
Power Supply
Circuit breaker
DESKTOP PEDESTALINSTALLATION
For adequate ventilation allow a clearance of 4”
(10cm) all around the TV.
! NOTE
Should Install wall mount on a solid wall perpendicular to
the floor.
G Should use a special wall mount, if you want to install it to
ceiling or slanted wall.
G The surface that wall mount is to be mounted on should
be of sufficient strength to support the weight of TV set;
e.g. concrete, natural rock, brick and hollow block.
G Installing screw type and length depends on the wall
mount used. Further information, refer to the instructions
included with the mount.
G LG is not liable for any accidents or damage to property or
TV due to incorrect installation:
- Where a non-compliant VESA wall mount is used.
- Incorrect fastening of screws to surface which may cause
TV to fall and cause personal injury.
- Not following the recommended Installation method.
G
4 inches
A
4 inches
4 inches
4 inches
B
Model
WALL MOUNT: HORIZONTAL
INSTALLATION
We recommend the use of a LG Brand wall mounting
bracket when mounting the TV to a wall.
A We recommend that you purchase a wall mounting
bracket which supports VESA standard.
A LG recommends that wall mounting be performed by a
qualified professional installer.
A
4 inches
4 inches
4 inches
4 inches
4 inches
12
22LF15R
26LF15R
32LF15R
VESA Standard
(A * B)
Screw Quantity
100 * 100 M4
4
200 * 100 M4
4
200 * 100 M4
4
NOT USING THE DESK-TYPE STAND
When installing the wall-mounted unit, use the protection cover.
22LF15R
Loose the bolts from TV.
2
Pull the H I N G E B O D Y backward.
PREPARATION
1
HINGE BODY
3
Insert the P R O T E C T I O N C O V E R into
the TV.
4
Fix the 4 bolts securely using the holes in
the back of the TV.
PROTECTION COVER
26/32LF15R
Insert the PROTECTION COVER into the TV
until clicking sound.
13
PREPARATION
■
To prevent damage do not connect to the mains outlet until all connections are made between the devices.
ANTENNA CONNECTION
For optimum picture quality, adjust
antenna direction.
■ An antenna cable and converter are
not supplied.
■
Wall
Antenna
Socket
RGB IN
HDMI IN
1
2
Multi-family Dwellings/Apartments
(Connect to wall antenna
socket) AUDIO
VIDEO
2
AV
PREPARATION
HDMI/DVI IN
1
VARIABLE
AUDIO OUT
COMPONENT IN
ANTENNA
IN
RF Coaxial Wire (75 ohm)
Outdoor
Antenna
Single-family Dwellings /Houses
(Connect to wall jack for outdoor antenna)
HDMI IN
1
RGB IN
HDMI/DVI IN
2
UHF
AV
Antenna
■
14
AUDIO
Signal
Amplifier
VHF
■
2
VIDEO
1
VARIABLE
AUDIO OUT
COMPONENT IN
ANTENNA
IN
In poor signal areas, to achieve better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above.
If signal needs to be split for two TVs,use an antenna signal splitter for connection.
EXTERNAL EQUIPMENT SETUP
■
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
Image shown may differ from your TV.
HD RECEIVER SETUP
Connecting with a component cable
Connect the video outputs (Y, PB, PR) of the digital set-top box to the C O M P O N E N T I N V I D E O
jacks on the TV.
2
Connect the audio output of the digital set-top
box to the C O M P O N E N T I N A U D I O jacks on
the TV.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top
box.)
4
Select C o m p o n e n t input source using the
I N P U T button on the remote control.
Signal
Component
HDMI
480i/576i
Yes
No
480p/576p
Yes
Yes
720p/1080i
Yes
Yes
1080p
Yes
Yes
(22LF15R- Only 50Hz, 60Hz)
(Only 50Hz, 60Hz)
(26/32LF15R Only 24Hz, 30Hz, 50Hz, 60Hz)
Y
PB
PR
L
R
VIDEO
AUDIO
COMPONENT IN
1
EXTERNAL EQUIPMENT SETUP
1
22LF15R
2
26/32LF15R
AUDIO
VIDEO
COMPONENT IN
1
2
IN
VIDEO
L/MONO AUDIO
R
VARIABLE
AUDIO OUT
15
EXTERNAL EQUIPMENT SETUP
Connecting a set-top box with a HDMI cable
1
EXTERNAL EQUIPMENT SETUP
2
Connect the HDMI output of the digital set-top box to the
H D M I I N jack on the TV.
22LF15R
HDMI IN
SERVICE ONLY
Select H D M I input source using the I N P U T button on
the remote control.
1
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
! NOTE
G
G
TV can receive the video and audio signal simultaneously
with using a HDMI cable.
If the digital set-top box supports Auto HDMI function,
the output resolution of the source device will be automatically TV to 1280x720p.
If the digital set-top box player does not support Auto
HDMI, you need to TV the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p .
26/32LF15R
IN
IN
VIDEO
AV
G
L/MONO AUDIO
OUT
VARIABLE
AUDIO OUT
1
16
R
DVD SETUP
Connecting with a component cable
22LF15R
1
Connect the video outputs (Y, PB, PR) of the DVD to
the C O M P O N E N T I N V I D E O jacks on the TV.
Y
PB
PR
R
EXTERNAL EQUIPMENT SETUP
2
Connect the audio outputs of the DVD to the
C O M P O N E N T I N A U D I O jacks on the TV.
3
Turn on the DVD player, insert a DVD.
4
Select C o m p o n e n t input source using the I N P U T
button on the remote control.
1
5
L
VIDEO
AUDIO
COMPONENT IN
2
Refer to the DVD player's manual for operating
instructions.
Component Input ports
To achieve better picture quality, connect a DVD player to
the component input ports as shown below.
Component ports on the TV
Video output ports
on DVD player
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
26/32LF15R
AUDIO
VIDEO
COMPONENT IN
1
2
17
EXTERNAL EQUIPMENT SETUP
Connecting with a HDMI cable
22LF15R
1
Connect the HDMI output of the DVD to the
H D M I I N jack on the TV.
EXTERNAL EQUIPMENT SETUP
2
Select H D M I input source using the I N P U T
button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
HDMI IN
SERVICE ONLY
1
! NOTE
The TV can receive video and audio signals simultaneously when using a HDMI cable.
G If the DVD player supports Auto HDMI function, the output resolution of the source device will be automatically
TV to 1280x720p.
G If the DVD player does not support Auto HDMI, you
must TV the output resolution appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
G
26/32LF15R
IN
IN
VIDEO
L/MONO AUDIO
OUT
VARIABLE
AUDIO OUT
1
18
R
VCR SETUP
■
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF cable
22LF15R
Connect the A N T O U T socket of the VCR
to the A N T E N N A I N socket on the TV.
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
L
VIDEO
1
2
3
ANTENNA IN
Connect the antenna cable to the A N T I N
socket of the VCR.
Press the P L A Y button on the VCR and
match the appropriate programme between
the TV and VCR for viewing.
H/P
Wall Jack
R
DIO
2
Antenna
EXTERNAL EQUIPMENT SETUP
1
26/32LF15R
HDMI DVI IN
VIDEO
HDMI IN
L/MONO AUDIO
R
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
VIDEO
L
AUDIO
R
ANTENNA
IN
2
Wall Jack
Antenna
19
EXTERNAL EQUIPMENT SETUP
HDMI DVI IN
VIDEO
Connecting with a RCA cable
HDMI IN
L/MONO AUDIO
22LF15R
L
VIDEO
AUDIO
SERVICE ONLY
ANTENNA
V I D E O jacks between TV and VCR.
Connect the A U D I O/V
Match the jack colours (Video = yellow, Audio Left = white, and
Audio Right = red)
EXTERNAL EQUIPMENT SETUP
Y
H/P
R
L
Insert a video tape into the VCR and press PLAY on the VCR.
(Refer to the VCR owner’s manual.)
2
AUDIO
VIDEO
AV IN
1
PB
PR
L
R
VIDEO
AUDIO
COMPONENT IN
1
Select A V input source using the I N P U T button on the
remote control.
3
! NOTE
G
S-VIDEO
L
VIDEO
ANT IN
R
ANT OUT
OUTPUT
SWITCH
If you have a mono VCR, connect the audio cable from the VCR
to the A U D I O L / M O N O jack of the TV.
26/32LF15R
IN
IN
VIDEO
R
AV
L/MONO AUDIO
OUT
VARIABLE
ARIABLE
AUDIO OUT
1
S-VIDEO
VIDEO
OUTPUT
SWITCH
20
R
L
R
ANT IN
ANT OUT
R
HEADPHONE SETUP(Only 22LF15R)
When connecting with a Headphone cable
Insert the headphone plug to the headphone socket of the
set. You can listen to the sound through the headphone. To
adjust the head-phone volume, press the F / G button. If
you press the MUTE button, the sound from the headphone is switched off.
H/P
EXTERNAL EQUIPMENT SETUP
1
21
EXTERNAL EQUIPMENT SETUP
OTHER A/V SOURCE SETUP
22LF15R
EXTERNAL EQUIPMENT SETUP
V I D E O jacks between TV
Connect the A U D I O/V
and external equipment. Match the jack colours.
(Video = yellow, Audio Left = white, and Audio Right
= red)
VIDEO
AUDIO
AV IN
1
H/P
R
L
Y
PB
PR
L
R
VIDEO
AUDIO
COMPONENT IN
1
2
Select A V input source using the I N P U T button
on the remote control.
If connected to A V I N, select A V input source.
VIDEO
3
L
R
Operate the corresponding external equipment.
Refer to external equipment operating guide.
Video Game Set
Camcorder
26/32LF15R
Camcorder
Video Game Set
VIDEO
L
R
1
/DVI IN
IN
AV
VIDEO
22
L/MONO AUDIO
OUT
VARIABLE
ARIABLE
AUDIO OUT
R
EXTERNAL STEREO SETUP (Except for 22LF15R)
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
IN 1
AV
VIDEO
L/MONO
L/
MONO AUDIO
R
OUT
2
Set up your speakers through your analog stereo
amplifier, according to the instructions provided with
the amplifier.
! NOTE
G
G
When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
(G p . 5 9 )
Select V a r i a b l e O u t in A u d i o menu to connect the
V A R I A B L E A U D I O O U T jacks.(G p . 6 0)
VARIABLE
AUDIO OUT
1
EXTERNAL EQUIPMENT SETUP
1
Connect the input jack of the stereo amplifier to the
V A R I A B L E A U D I O O U T jacks on the TV.
23
EXTERNAL EQUIPMENT SETUP
AV OUTPUT SETUP(Except for 22LF15R)
IN 1
VIDEO
L/MONO AUDIO
R
VIDEO
AV
The TV has a special signal output capability which allows you
L/MONO
L/
MONO AUDIO
R
OUT
to hook up the second TV or monitor.
1
EXTERNAL EQUIPMENT SETUP
24
VARIABLE
ARIABLE
AUDIO OUT
Connect the second TV or monitor to the TV’s AV OUT
jacks.
1
2
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
S-VIDEO
! NOTE
G
Component, RGB, HDMI input sources cannot be used for
AV out.
G
We recommend to use the AV OUT jacks for VCR recording.
VIDEO
L
R
Supported Display Resolution
22LF15R
26/32LF15R
HDMI-DTV mode
HDMI-DTV mode
Vertical
Frequency(Hz)
59.94
60.00
50.00
720x576
31.25
50.00
37.5
44.96
45.00
50.00
59.94
60.00
1280x720
44.96
45
37.50
59.94
60.00
50.00
1920x1080i
33.72
33.75
28.125
59.94
60.00
50.00
1920x1080i
28.125
33.72
33.75
50.00
59.94
60.00
1920x1080p
56.252
67.432
67.5
50
59.94
60.00
56.25
67.432
67.5
27
33.75
50.00
59.94
60.00
24
30.00
720x480
Vertical
Frequency(Hz)
59.94
60.00
720x576
31.25
1280x720
Resolution
1920x1080p
EXTERNAL EQUIPMENT SETUP
720x480
Horizontal
Frequency(kHz)
31.47
31.5
Horizontal
Frequency(kHz)
31.47
31.50
Resolution
25
EXTERNAL EQUIPMENT SETUP
SCREEN SETUP
Manual Configure (Adjustment for screen Position)
If the picture is not clear and especially if characters are still trembling, adjust the picture phase manually.
EXTERNAL EQUIPMENT SETUP
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
1
Press the M E N U button and then use D / E button to
select the P i c t u r e menu.
DEF G OK MENU
1
Picture
2
Press the G button and then use D / E button to select
S c r e e n.
3
Press the G button and then use D / E button to select
M a n u a l C o n f i g ..
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Screen
To Set
G
DEF G OK MENU
4
Press the G button and then use D / E button to select
H - P o s i t i o n or V - P o s i t i o n.
5
Press the F / G button to make appropriate adjustments.
6
Press the M E N U button to move to the previous menu
screen.
2
Screen
Manual Config.
Reset
G
H-Position
V-Position
50
50
DEF G OK MENU
3 4 5
26
Initializing
(Reset to original factory settings)
This function operates in current mode.
To initialize the adjusted value
EXTERNAL EQUIPMENT SETUP
Picture
1
Press the MENU button and then use D / E button to
select the P i c t u r e menu.
2
Press the G button and then use D / E button to select
S c r e e n.
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
DEF G OK MENU
1
3
Press the G button and then use D / E button to select
R e s e t.
4
Press the G button.
5
Press the M E N U button to move to the previous menu
screen.
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Screen
To Set
G
DEF G OK MENU
2
Screen
Manual Config.
Reset
G
To Set
DEF G OK MENU
3 4
27
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER Switches the set on from standby or off to standby.
TV Returns to the TV viewing from any mode.
Switches the set on from standby.
INPUT If you press the button once, the input source OSD will
appear on screen as shown. Press the D / E button and
then OK button to select the desired input source.
WATCHING TV / PROGRAMME CONTROL
28
MUTE Switches the sound on or off.
PSM Recalls your preferred picture setting.
SSM Recalls your preferred sound setting.
I/II Selects the sound output. (G p . 6 1)
0~9 number Selects a programme.
button Selects numbered items in a menu.
Switches the set on from standby.
RATIO
LIST Displays the programme table.
Q.VIEW Returns to the previously viewed programme.
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left/ the system settings to your preference.
Right)
Adjusts the volume.
Selects a programme.
Switches the set on from standby. (Up/Down)
OK Accepts your selection or displays the current mode.
MENU Selects a menu.
SLEEP Sets the sleep timer.
Coloured These buttons are used for teletext (only T E L E T E X T
buttons models) or P r o g r a m m e e d i t.
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section. (G p . 6 8)
RATIO
WATCHING TV / PROGRAMME CONTROL
RATIO Selects your desired picture format.(G p . 4 1)
Installing Batteries
■
Open the battery compartment cover on the back side and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AAA batteries. Don’t mix old or used batteries with
new ones.
■
Close cover.
29
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
1
■
)
In standby mode to turn TV on, press the
, I N P U T , P R D / E( o r P
/
9 ) butbutton on the TV or press the P O W E R, T V, I N P U T, D / E, N U M B E R( 0~9
tons on the remote control and the TV will switch on.
WATCHING TV / PROGRAMME CONTROL
Installation Guide
If the OSD (On Screen Display) is displayed on the screen after turning on the TV, you can adjust the
L a n g u a g e, L o c a t i o n , A u t o T u n i n g.
Note:
a. It will automatically disappear after approx. 40 seconds unless a button is pressed.
b. “In -Store” mode is only for shop display and not for general customer use.
c. "Home” mode is the optimal setting for home environments, and is the TV's default mode.
d. "In-Store" mode is the optimal setting for store environments. If a user modifies image quality data,
“In- Store” mode initializes the product to the image quality set by us after a certain period of time.
e. The mode (Home, In- Store) can be changed by executing Factory Reset in the Option menu.
PROGRAMME SELECTION
1
Press the D /
E
or N U M B E R buttons to select a programme number.
VOLUME ADJUSTMENT
30
1
Press the
2
If you wish to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the M U T E,
F
/
G
button to adjust the volume.
F
/
G
button.
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
1
Press the M E N U button and then D /
2
Press the G button and then D /
3
Change the setting of an item in the sub or pull-down menu with F /
You can move to a higher level menu by pressing the O K button.
E
E
button to display each menu.
button to select a menu item.
button.
Setup
Picture
Audio
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
DEF G OK MENU
DEF G OK MENU
DEF G OK MENU
Setup MENU
Audio MENU
Picture MENU
Except for 22LF15R
Option
Time
Language
Key Lock
Power Indicator
Factory Reset
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
DEF G OK MENU
Option MENU
Except for 22LF15R
0
WATCHING TV / PROGRAMME CONTROL
G
DEF G OK MENU
Time MENU
! NOTE
a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it
provides graphical presentation.
b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just
example to help the TV operation.
c. In the teletext mode, menus are not displayed.
31
WATCHING TV / PROGRAMME CONTROL
AUTO PROGRAMME TUNING
Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you
have preset the stations, you will be able to use the D / E or NUMBER buttons to
scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
All stations which can be received are stored by this method. It is
recommended that you use Auto tuning during installation of this TV.
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then D /
S e t u p menu.
2
Press the G button and then D /
T u n i n g.
E
3
Press the G button and then D /
E
4
Press the D / E button to select a TV system menu;
BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia /
NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines)
E
button to select the
button to select A u t o
DEF G OK MENU
1
Setup
AutoTuning
Tuning
Auto
Manual Tuning
Programme Edit
Favourite Programme
To Set
G
button to select S t o r a g e F r o m.
Press the D /
6
Press the F / G button or NUMBER buttons to select the initial programme number. If you use NUMBER buttons, any
number under 10 is entered with a numeric ‘0’ in front of it,
0 5’ for 5.
i.e.‘0
7
Press the D /
8
Press the G button to begin auto tuning.
All receivable stations are stored.
E
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select S y s t e m.
5
E
Setup
button to select S e a r c h.
DEF G OK MENU
2
Auto Tuning
System
Storage From
Search
G
BG
I
DK
M
DEF G OK MENU
To stop auto tuning, press the M E N U button.
When auto tuning is complete, the Programme edit menu
appears on the screen. See the Programme edit section to edit
the stored programme.
3 4 5 6 7
Auto Tuning
C 05
5
9
32
BG
35%
Press the M E N U button to move to the previous menu
screen.
8
MANUAL PROGRAMME TUNING
Manual programme lets you manually tune and arrange the stations
in whatever order you desire.
1
Press the M E N U button and then D /
the S e t u p menu.
2
Press the G button and then D /
M a n u a l T u n i n g.
3
Press the G button and then D /
4
Press the F / G button or NUMBER buttons to select the
desired programme number (0 to 99). If you use NUMBER
buttons, any number under 10 is entered with a numeric ‘0’
0 5’ for 5.
in front of it, i.e. ‘0
5
Press the D /
6
Press the D / E button to select a TV system menu;
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia /
NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines)
7
Press the D /
8
Press the G button and then D /
V / U H F or C a b l e.
9
Press the D /
10
You can select the desired programme number with the F /
G button or NUMBER buttons. If possible, select the programme number directly with the number buttons. Any
number under 10 is entered with a numeric ‘0’ in front of it,
0 5’ for 5.
i.e. ‘0
button to select
button to select
WATCHING TV / PROGRAMME CONTROL
E
E
E
E button to select S t o r a g e.
button to select S y s t e m.
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DEF G OK MENU
E
E
button to select B a n d.
E
button to select
button to select C h a n n e l.
11
Press the D /
12
Press the F / G button to commence searching. If a station is found the search will stop.
13
Press the O K button to store it.
14
To store another station, repeat steps 3 to 1 3.
15
Press the M E N U button to move to the previous menu
screen.
E
button to select S e a r c h.
1
Setup
Auto Tuning
Manual
ManualTuning
Tuning
Programme Edit
Favourite Programme
G
To Set
DEF G OK MENU
2
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
Booster
G
1
DEF G OK MENU
3 4 5 6 7
8 9 10 11 12
33
WATCHING TV / PROGRAMME CONTROL
FINE TUNING
Normally fine tuning is only necessary if reception is poor.
WATCHING TV / PROGRAMME CONTROL
Setup
1
Press the M E N U button and then D /
the S e t u p menu.
2
Press the G button and then D /
M a n u a l T u n i n g.
E
E
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
button to select
DEF G OK MENU
1
3
4
Press the G button and then D /
Press the G button and then F /
the best picture and sound.
E
G
button to select F i n e.
Setup
Auto Tuning
Manual Tuning
Tuning
Manual
Programme Edit
Favourite Programme
To Set
G
button to fine tune for
DEF G OK MENU
5
Press the O K button to store it.
2
Manual Tuning
6
Press the M E N U button to move to the previous menu
screen.
Storage
System
Band
Channel
Fine
Search
Name
Booster
G
F /G
DEF G OK MENU
3 4 5
34
ASSIGNING A STATION NAME
You can assign a station name up to five characters to each programme number.
2
Press the G button and then D /
M a n u a l T u n i n g.
E
E
Setup
button to select
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
DEF G OK MENU
1
3
4
Press the G button and then D /
N a m e.
E
button to select
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then D /
the S e t u p menu.
Setup
Auto Tuning
Manual Tuning
Tuning
Manual
Programme Edit
Favourite Programme
To Set
G
Press the G button and then D / E button. You can use a
blank, + , - , the number 0 to 9 and the alphabet A to Z .
DEF G OK MENU
5
6
7
Press the F / G button to select the position and make
your choice of the second character, and so on.
Press the O K button to store it.
Press the M E N U button to move to the previous menu
screen.
2
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
Booster
G
-----
DEF G OK MENU
3 4 5 6
35
WATCHING TV / PROGRAMME CONTROL
BOOSTER
In some models, B o o s t e r is an optional function. Only a set
with B o o s t e r can perform this function.
If reception is poor select B o o s t e r to On.
When the signal is strong, select “Off”.
WATCHING TV / PROGRAMME CONTROL
Setup
1
Press the M E N U button and then D /
the S e t u p menu.
2
Press the G button and then D /
M a n u a l T u n i n g.
E
E
button to select
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
DEF G OK MENU
1
3
4
Press the G button and then use D /
B o o s t e r.
E
Press the G button and then use D /
O n or O f f.
E
button to select
Setup
Auto Tuning
Manual Tuning
Tuning
Manual
Programme Edit
Favourite Programme
To Set
G
button to select
DEF G OK MENU
2
5
Press the M E N U button to move to the previous menu
screen.
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
Booster
G
Off
On
DEF G OK MENU
3 4 5
36
PROGRAMME EDIT
This function enables you to delete or skip stored programmes.
Also you can move some stations to other programme numbers
or copy a blank station data into the selected programme number.
1
Press the M E N U button and then D /
the S e t u p menu.
2
Press the G button and then D /
P r o g r a m m e E d i t.
3
Press the G button to display the Programme edit menu.
button to select
WATCHING TV / PROGRAMME CONTROL
E
E
button to select
Deleting a programme
1.Select a programme to be deleted with the D / E /
/ G button.
2.Press the RED button twice.
The selected programme is deleted, all the following
programmes are shifted up one position.
A
F
Setup
Copying a programme
1.Select a programme to be copied with the D / E / F
/ G button.
2.Press the GREEN button.
All the following programmes are shifted down one position.
A
Moving a programme
1.Select a programme to be moved with the D / E / F / G
button.
2.Press the YELLOW button.
3.Move the programme to the desired programme number with
the D / E / F / G button.
4.Press the YELLOW button again to release this function.
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
A
Skipping a programme number
1.Select a programme number to be skipped with the D / E /
F / G button.
2.Press the BLUE button. The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will
be unable to select it using the D / E button during normal
TV viewing. If you wish to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
A
4
Press the M E N U button to move to the previous menu
screen.
DEF G OK MENU
1
Setup
Auto Tuning
Manual Tuning
Programme
Programme Edit
Edit
Favourite Programme
G
To Set
DEF G OK MENU
2
Programme Edit
0 C 03
1 BLN 03
2 C 12
3 S 66
4 S 67
5
6
7
8
9
S
S
S
C
C
Delete
Move
Copy
Skip
69
17
22
09
11
3
37
WATCHING TV / PROGRAMME CONTROL
FAVOURITE PROGRAMME
This function lets you select your favourite programmes directly.
Repeatedly press the YELLOW button to select stored favourite
programmes.
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then D /
S e t u p menu.
2
Press the G button and then D /
F a v o u r i t e P r o g r a m m e.
3
Press the
4
Press the D /
G
E
E
button to select the
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
button.
DEF G OK MENU
5
6
E
button to select - - - - - - -.
1
Select a desired programme with the F / G button or NUMBER buttons. Any number under 10 is entered with a numeric
0 5’ for 5.
‘0’in front of it, i.e.‘0
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Programme
Favourite
To store another programme, repeat steps 4 to 5 .
You can store up to 8 programmes.
G
---------
---------------------------------
DEF G OK MENU
7
38
Press the M E N U button to move to the previous menu
screen.
2 3 4 5
SELECTING THE PROGRAMME LIST
You can check which programmes are stored in the memory by displaying the programme list.
A
Displaying programme list
Press the L I S T button to display the Programme list menu.
WATCHING TV / PROGRAMME CONTROL
The programme list appears on the screen.
One programme list contains ten programmes as shown.
! NOTE
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the
programme list indicate there is no station name assigned.
A
Selecting a programme in the programme list
Select a programme with the D / E / F / G button.
Then press the O K button. The TV switches to the chosen
programme number.
A
Paging through a programme list
There are 10 programme table pages in which contain 100 pro
grammes. Pressing the D / E / F / G button repeatedly turns the
pages.
Programme List
0
C 03
5
S 69
1 BLN 03
6
S 17
2
C 12
7
S 22
3
S
66
8
C 09
4
S
67
9
C 11
Press the L I S T button to return to normal TV viewing.
39
WATCHING TV / PROGRAMME CONTROL
KEY LOCK
The TV can be set so that the remote control is needed to control it.
This feature can be used to prevent unauthorized viewing.
This TV is programmed to remember which option it was last
set to even if you turn the TV off.
WATCHING TV / PROGRAMME CONTROL
Option
1
Press the M E N U button and then D /
the O p t i o n menu.
2
Press the G button and then D /
L o c k.
E
E
button to select
Language
Key Lock
Factory Reset
button to select K e y
DEF G OK MENU
1
3
Press the G button and then D /
O f f.
E
button to select O n or
Option
Language
Key Lock
Factory Reset
G
Off
On
Press the M E N U button to move to the previous menu
screen.
4
DEF G OK MENU
2 3
! NOTE
G
G
40
In K e y L o c k ‘O n’, if the TV is turned off, press the r / I, I N P U T, P R D / E button on the TV or
P O W E R, I N P U T, T V, D / E or NUMBER buttons on the remote control.
With the K e y L o c k O n, the display ‘K e y L o c k O n’ appears on the screen if any button on the front
panel is pressed while viewing the TV.
PICTURE CONTROL
PICTURE SIZE (ASPECT RATIO)CONTROL
You can watch the screen in various picture formats; 1 6 : 9 , O r i g i n a l, 4 : 3, 1 4 : 9,
Z o o m 1 / 2 and J u s t S c a n(Except for 22LF15R).
If a fixed image is displayed on the screen for a long time, that fixed image may
become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using D
E
button.
This function works in the following signal.
You can adjust Aspect Ratio in the Picture menu.
• 16:9
The following selection will allow you to adjust the
picture horizontally, in linear proportion, to fill the
entire screen(useful for viewing 4:3 formatted
DVDs).
16:9
• Original
When your TV receives a wide screen signal it will
automatically change to the picture format to be
broadcast.
Original
• 4:3
The following selection will allow you to view a picture with an original 4:3 aspect ration, grey bars
will appear on both the left and right hand of the
screen.
PICTURE CONTROL
1
4:3
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
14:9
DE
41
PICTURE CONTROL
• Zoom1
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
Zooml
DE
• Just Scan
Following Selection will lead to you view the
picture of best quality without loss of original
picture in high resolution image.
Just Scan
PICTURE CONTROL
• Zoom2
Choose Zoom 2 when you wish the picture to
be altered, both horizontally extended and
vertically cropped. The picture adopting a
compromise between alteration and screen
converage.
Zoom2
DE
! NOTE
G
G
42
You can only select 4:3,16:9 (Wide) in Component, HDMI mode.
In HDMI/Component (over 720p)mode, Just Scan(Except for 22LF15R) is available.
PRESET PICTURE SETTINGS
Picture Mode-Preset
Picture Mode adjusts the TV for the best picture appearance. Select the
preset value in the P i c t u r e M o d e menu based on the programme
category.
Vivid, Standard, Cinema, Sport and Game are programmed for optimum picture reproduction at the factory and cannot be changed.
PICTURE CONTROL
Picture
1
Press the M E N U button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
P i c t u r e M o d e.
3
Press the G button and then D / E button to select V i v i d ,
S t a n d a r d , C i n e m a , S p o r t , G a m e , U s e r 1 or U s e r 2.
4
Press the M E N U button to move to the previous menu
screen.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
button to select
DEF G OK MENU
1
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
Vivid
Standard
Cinema
Sport
Game
User1
User2
DEF G OK MENU
2 3
43
PICTURE CONTROL
Auto Colour Tone Control(Cool/Medium/Warm)
To initialize values (reset to default settings), select the Cool
option.
Choose one of three automatic colour adjustments. Set to
warm to enhance hotter colours such as red, or set to cool to
see less intense colours with more blue.
PICTURE CONTROL
This menu is activated after selecting “User1” or “User2” in the
Picture Mode.
Picture
1
Press the M E N U button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
C o l o u r T e m p e r a t u r e.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
button to select
DEF G OK MENU
1
3
4
Press the G button and then D / E button to select
either C o o l, M e d i u m, W a r m or U s e r.
Press the M E N U button to move to the previous menu
screen.
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
Cool
Medium
Warm
User
DEF G OK MENU
2 3
44
MANUAL PICTURE ADJUSTMENT
Picture Mode-User Option
Backlight
Contrast
Brightness
Colour
Sharpness
1
Press the M E N U button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
P i c t u r e M o d e.
E
E
Picture
PICTURE CONTROL
Tint
To control the brightness of the screen, adjust
the brightness of LCD panel.
Adjusts the difference between light and dark
levels in the picture.
Increases or decreases the amount of white in
the picture.
Adjusts intensity of all colours.
Adjusts the level of crispness in the edges
between the light and dark areas of the picture.
The lower the level, the softer the image.
Adjusts the balance between red and green
levels.
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
DEF G OK MENU
button to select
1
Picture
3
Press the G button and then D /
U s e r 1 or U s e r 2.
4
Press the G button and then D / E button to select the
B a c k l i g h t, C o n t r a s t,
desired picture option (B
B r i g h t n e s s, C o l o u r, S h a r p n e s s and T i n t).
E
button to select
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
Vivid
Standard
Cinema
Sport
Game
User1
User2
DEF G OK MENU
2 3
User1
5
Press the F /
G
6
Press the M E N U button to move to the previous menu
screen.
button to make appropriate adjustments.
Backlight
Contrast
Contrast
Brightness
Colour
Sharpness
Tint
100
100
G
50
70
70
0
DEF G OK MENU
4 5
E
Contrast
100
F
G
E
45
PICTURE CONTROL
Colour Tone - User Option
To adjust red, green, blue to any colour temperature you prefer.
This menu is activated after selecting “User1” or “User2” in the
Picture Mode.
PICTURE CONTROL
Picture
1
Press the M E N U button and then D /
the P i c t u r e menu.
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
DEF G OK MENU
2
Press the G button and then D /
C o l o u r T e m p e r a t u r e.
E
1
button to select
Picture
3
Press the G button and then D /
E
button to select U s e r.
4
Press the G button and then D /
G r e e n or B l u e.
E
button to select R e d,
Picture Mode
Colour
Colour Temperature
Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
Cool
Medium
Warm
User
DEF G OK MENU
2 3
User
5
Press the F /
6
Press the M E N U button to move to the previous menu
screen.
G
button to make appropriate adjustments.
Red
Green
Blue
+30
+30
0
0
DEF G OK MENU
4 5
E
Red
E
46
G
+30 F
G
- PICTURE IMPROVEMENT TECHNOLOGY
XD is LG electronic's unique picture improving technology to
display a real HD source through an advanced digital signal processing algorithm.
U s e r 1” or “U
U s e r 2” in
This menu is activated after selecting “U
the Picture Mode.
1
Press the MENU button and then D /
the P i c t u r e menu.
E
button to select
2
E
button to select X D.
Press the G button and then D /
A u t o or M a n u a l.
E
button to select
PICTURE CONTROL
3
Press the G button and then D /
Picture
4
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
Press the M E N U button to move to the previous menu
screen.
* Manual Selection
1
Picture
1
Press the G button and then D / E button to select X D
C o n t r a s t , X D C o l o u r or X D N R.
2
Press the G button and then D / E button to select O f f,
L o w or H i g h.
Select O f f, L o w, H i g h or A d a p t i v e (Only X D N R).
3
Press the M E N U button to move to the previous menu
screen.
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
Auto
Manual
2 3
Manual
XD
XD Contrast
Contrast
XD Colour
XD NR
X D C o n t r a s t : Optimises the contract automatically
according to the brightness of the reflection.
A X D C o l o u r : Adjusts the colour of the reflection automatically to reproduce as close as possible to
natural colours.
A X D N R : Removes interference up to the point where it
does not damage the original picture.
G G
Off
Low
High
A
1 2
47
PICTURE CONTROL
ADVANCED - GAMMA
High gamma values display whitish images and low gamma
values display high contrast images.
PICTURE CONTROL
Picture
1
Press the M E N U button and then D /
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
the P i c t u r e menu.
2
Press the
G
button and then
D
/
E button to select A d v a n c e d.
DEF G OK MENU
1
Picture
3
4
Press the
Press the
G
G
button and then D /
button and then D /
E button to select G a m m a.
E button to select
Low,
M e d i u m or H i g h .
Picture Mode
Colour Temperature
XD
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
G
To Set
DEF G OK MENU
2 3
Advanced
5
Press the M E N U button to move to the previous menu
screen.
Gamma
Gamma
Film Mode
Black Level
G
Low
Medium
High
DEF G OK MENU
4
48
ADVANCED - Film Mode
To set the TV up for the best picture quality for viewing films.
This menu is activated after selecting “Analog TV”, “AV” and
“Component”(480i/576i) mode in the INPUT.
PICTURE CONTROL
Picture
1
Press the M E N U button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
A d v a n c e d.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
button to select
DEF G OK MENU
1
Picture
3
4
Press the G button and then D /
M o d e.
Press the G button and then D /
O f f.
E
E
button to select F i l m
Picture Mode
Colour Temperature
XD
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
To Set
G
button to select O n or
DEF G OK MENU
2 3
5
Press the M E N U button to move to the previous menu
screen.
Advanced
Gamma
Film Mode
Mode
Film
Black Level
G
Off
On
DEF G OK MENU
4
49
PICTURE CONTROL
ADVANCED - BLACK(DARKNESS) LEVEL
When you view a film this function adjust the TV to best picture
quality. Adjusting the contrast and the brightness of the screen
using the black level of the screen.
This function works in the following mode:
RF(NTSC-M), AV(NTSC-M, NTSC-4.43), COMPONENT or
HDMI.
PICTURE CONTROL
Picture
1
Press the M E N U button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
A d v a n c e d.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
button to select
DEF G OK MENU
1
3
4
Press the G button and then D /
L e v e l.
Press the G button and then D /
or H i g h .
E
E
button to select B l a c k
button to select L o w
Picture
Picture Mode
Colour Temperature
XD
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
G
To Set
DEF G OK MENU
A
A
L o w : The reflection of the screen gets darker.
H i g h : The reflection of the screen gets brighter.
2 3
Advanced
5
Press the M E N U button to move to the previous menu
screen.
Gamma
Film Mode
Black Level
Level
Black
G
Low
High
DEF G OK MENU
4
50
ADVANCED - Eye Care (Except for 22LF15R)
This feature is not available for all models.
It helps you adjust brightness when the screen is too
bright to prevent dazzling.
When selecting Picture Mode (Standard, Game, Sport,
User1 and User2), you can operate this function.
PICTURE CONTROL
Picture
1
Press the M E N U button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
A d v a n c e d.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
button to select
DEF G OK MENU
1
Picture
3
4
Press the G button and then D /
C a r e.
Press the G button and then D /
Off.
E
E
button to select E y e
button to select O n or
Picture Mode
Colour Temperature
XD
Advanced
Advanced
Aspect Ratio
Picture Reset
Screen
G
To Set
DEF G OK MENU
2 3
5
Press the M E N U button to move to the previous menu
screen.
Advanced
Gamma
Film Mode
Black Level
Eye Care
Care
Eye
G
Off
On
DEF G OK MENU
4
51
PICTURE CONTROL
PICTURE RESET
Returns to the default factory setting for Picture Mode, Colour
Temperature, XD, Advanced, Aspect Ratio.
PICTURE CONTROL
Picture
1
Press the M E N U button and then D /
the P i c t u r e menu.
2
Press the G button and then D /
P i c t u r e R e s e t.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
button to select
button to select
DEF G OK MENU
1
3
Press the G button to initialize the adjusted value.
4
Press the M E N U button to move to the previous menu
screen.
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
To Set
DEF G OK MENU
2 3
52
POWER INDICATOR
(Except for 22LF15R)
It helps you adjust the brightness of moving LED when power is
turned on.
PICTURE CONTROL
Option
1
Press the M E N U button and then D /
select the O p t i o n menu.
2
Press the G button and then D /
P o w e r I n d i c a t o r.
3
Press the G button and then D / E button to select
either S t a n d b y L i g h t or P o w e r L i g h t.
E
E
button to
Language
Key Lock
Power Indicator
Factory Reset
button to select
DEF G OK MENU
4
5
Press the G button and then D /
or O f f .
E
button to select O n
Press the M E N U button to move to the previous menu
screen.
1
Option
Language
Key Lock
Power Indicator
To set
G
Factory Reset
DEF G OK MENU
2 3
Power Indicator
Standby Light
Light
Standby
Power Light
G
Off
On
DEF G OK MENU
4
53
PICTURE CONTROL
FACTORY RESET
Use to quickly reset all the menu options to their original
factory preset values.
This function deletes all TV programmes.
PICTURE CONTROL
Option
1
Press the M E N U button and then D /
select the O p t i o n menu.
2
Press the G button and then D /
F a c t o r y R e s e t.
E
E
button to
Language
Key Lock
Factory Reset
button to select
DEF G OK MENU
3
4
Press the G button and then F /
Y e s or N o.
G
button to select
Press the M E N U button to move to the previous menu
screen.
1
Option
Language
Key Lock
Factory Reset
To set
G
DEF G OK MENU
2
Factory Reset
Yes
No
3
54
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume
if you change programmes.
1
2
Press the M E N U button and then D /
the A u d i o menu.
Press the G button and then D /
V o l u m e.
E
E
Sound Mode
Auto Volume
Balance
button to select
0
button to select A u t o
DEF G OK MENU
1
3
4
Press the G button and then D /
or O f f.
E
button to select O n
Audio
Sound Mode
Auto Volume
Balance
G
0
Off
On
SOUND & LANGUAGE CONTROL
Audio
Press the M E N U button to move to the previous menu
screen.
DEF G OK MENU
2 3
55
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; SRS TSXT(Except for
22LF15R), Clear Voice(Except for 22LF15R), Standard, Music,
Cinema, Sport or Game and you can also adjust the frequency
of the equalizer.
Sound Mode lets you enjoy the best sound without any Special
adjustment as the TV sets the appropriate sound options based
on the programme content.
S R S T S X T (Except for 22LF15R), C l e a r V o i c e(Except for
22LF15R), S t a n d a r d, M u s i c, C i n e m a, S p o r t and G a m e are
preset for optimum sound quality at the factory and are not
adjustable.
SOUND & LANGUAGE CONTROL
Audio
Press the M E N U button and then D /
the A u d i o menu.
1
Press the G button and then D /
S o u n d M o d e.
2
E
E
button to select
Sound Mode
Auto Volume
Balance
0
button to select
DEF G OK MENU
1
Press the G button and then D / E button to select S R S
T S X T(Except for 22LF15R), C l e a r V o i c e(Except for
22LF15R), S t a n d a r d, M u s i c, C i n e m a, S p o r t , G a m e or
U s e r.
3
Audio
Sound Mode
Auto Volume
Balance
Press the M E N U button to move to the previous menu
screen.
4
G
0
SRS TSXT
Clear Voice
Standard
Music
Cinema
Sport
Game
User
DEF G OK MENU
Except for 22LF15R
G
G
56
is a trademark of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
2 3
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
1
2
Press the M E N U button and then D /
the A u d i o menu.
Press the G button and then D /
S o u n d M o d e.
E
E
button to select
Sound Mode
Auto Volume
Balance
SOUND & LANGUAGE CONTROL
Audio
0
button to select
DEF G OK MENU
1
3
Press the G button and then D /
E
button to select U s e r.
Audio
Sound Mode
Auto Volume
Balance
4
Press the G button.
5
Select a frequency band by pressing the F / G button.
Set the desired sound level with the D / E button.
G
SRS TSXT
Clear Voice
Standard
Music
Cinema
Sport
Game
User
0
DEF G OK MENU
Except for 22LF15R
2 3 4
User
6
Press the M E N U button to move to the previous menu
screen.
0.1 0.5 1.5 5.0 10 kHz
5
57
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to the preferred levels.
SOUND & LANGUAGE CONTROL
Audio
1
2
Press the M E N U button and then D /
the A u d i o menu.
Press the G button and then D /
B a l a n c e.
E
E
button to select
Sound Mode
Auto Volume
Balance
0
button to select
DEF G OK MENU
1
3
4
Press the G button and then F /
desired adjustment.
G
button to make
Audio
Sound Mode
Auto Volume
Balance
Balance
0 G0
Press the M E N U button to move to the previous menu
screen.
DEF G OK MENU
2 3
58
TV SPEAKERS ON/OFF SETUP (Except for 22LF15R)
You can adjust the internal speaker status.
In TV, AV, COMPONENT and HDMI mode, internal speaker
audio can be operational even though there is no video signal.
If you wish to use an external hi-fi system, turn off the TV
internal speakers.
Audio
2
Press the M E N U button and then D /
the A u d i o menu.
Press the G button and then D /
S p e a k e r.
E
E
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
0
button to select T V
DEF G OK MENU
1
3
Press the G button and then D /
O n or O f f.
E
button to select
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
4
0
G
Off
On
SOUND & LANGUAGE CONTROL
1
Press the M E N U button to move to the previous menu
screen.
DEF G OK MENU
2 3
59
SOUND & LANGUAGE CONTROL
SELECTING AUDIO OUT(Except for 22LF15R)
Select M o n i t o r O u t or V a r i a b l e o u t to connect the audio outputs.
Audio
SOUND & LANGUAGE CONTROL
1
2
Press the M E N U button and then D /
the A u d i o menu.
Press the G button and then D /
A u d i o O u t.
E
E
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
button to select
0
button to select
DEF G OK MENU
1
3
4
Press the G button and then D / E button to select
M o n i t o r O u t or V a r i a b l e O u t.
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
Audio Out
Press the M E N U button to move to the previous menu
screen.
0
G
Monitor Out
Variable Out
DEF G OK MENU
2 3
60
I/II
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme number
and station name.
1
Press the I / I I button to select the M u l t i A u d i o menu.
On Screen Display
MONO
Stereo
STEREO
Dual
DUAL I, DUAL II, DUAL I+II
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved. To switch back to stereo.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL
I+II.
DUAL I
DUAL II
DUAL I+II
SOUND & LANGUAGE CONTROL
Broadcast
Mono
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
61
SOUND & LANGUAGE CONTROL
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
SOUND & LANGUAGE CONTROL
1
When NICAM mono is received, you can select N I C A M M O N O or F M M O N O.
2
When NICAM stereo is received, you can select N I C A M S T E R E O or F M M O N O.
If the stereo signal is weak, switch to F M M O N O.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or
N I C A M D U A L I + I I or F M M O N O.
Speaker Sound Output Selection
In AV, Component and HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L + R : Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio
R input is sent to the right loudspeaker.
L + L : Audio signal from audio L input is sent to left and right loudspeakers.
R + R : Audio signal from audio R input is sent to left and right loudspeakers.
62
ON-SCREEN MENU LANGUAGE SELECTION
The menus can be shown on the screen in the selected language. First select
your language.
Press the M E N U button and then use D /
O p t i o n menu.
2
Press the G button and then use D /
E
button to select L a n g u a g e.
3
Press the G button and then use D /
desired language.
E
/
4
Press the O K button
5
Press the M E N U button to move to the previous menu screen.
E
F
button to select the
/
G
button to select your
SOUND & LANGUAGE CONTROL
1
63
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
If current time setting is erased by a power failure or the TV is
unplugged, reset the clock.
Time
TIME SETTING
1
Press the M E N U button and then D /
the T i m e menu.
2
Press the G button and then D /
C l o c k.
E
E
button to select
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
button to select
DEF G OK MENU
1
3
Press the G button and then D /
4
Press the G button and then D /
minute.
E
button to set the hour.
E
button to set the
Time
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
G
-- : --
DEF G OK MENU
5
64
Press the M E N U button to move to the previous menu
screen.
2 3 4
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby
at a preset time.
Two hours after the TV is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
Once the on time/off time is set, these functions operate daily at
the preset time.
The Off time function overrides the On timer function if both are
set to the same time.
The TV must be in standby mode for the On timer to work.
Time
Press the M E N U button and then D /
the T i m e menu.
2
Press the G button and then D / E button to select
O n/O
O f f T i m e.
O f f T i m e function, select O f f.
• To cancel O n/O
E
button to select
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
DEF G OK MENU
1
3
Press the G button and then D /
E
button to set the hour.
4
Press the G button and then D /
minutes.
5
For On Time function only
• P r o g r a m m e: Press the G button and then D / E button
to select the programme.
• V o l u m e: Press the G button and then D / E button to
adjust volume level at switch-on.
6
E
button to set the
TIME SETTING
1
Time
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
G
-- : -Off
DEF G OK MENU
2 3 4
Time
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
Press the M E N U button to move to the previous menu
screen.
G
-- : -PR
Vol.
On
1
30
DEF G OK MENU
2 3 4 5
65
TIME SETTING
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you
go to sleep. The sleep timer automatically switches the TV to
standby after the preset time has elapsed.
Time
TIME SETTING
1
Press the M E N U button and then D /
the T i m e menu.
2
Press the G button and then D /
T i m e r.
E
E
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
button to select
button to select S l e e p
DEF G OK MENU
1
Press the G button and then D /
minute.
3
E
button to set the
Time
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
G
Off
Press the M E N U button to move to the previous menu
screen.
4
DEF G OK MENU
2 3 4
! NOTE
G
66
When you switch the TV off, the TV releases the preset sleep time.
AUTO SHUT-OFF SETTING
If the TV set is switched on and there is no input signal, it will
switch off automatically after 10 minutes.
Time
Press the M E N U button and then D /
the T i m e menu.
2
Press the G button and then D /
S l e e p.
E
E
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
button to select
button to select A u t o
DEF G OK MENU
1
3
4
Press the G button and then D /
O f f.
E
button to select O n or
TIME SETTING
1
Time
Clock
Off Time
On Time
Sleep Timer
Auto Sleep
G
Off
On
Press the M E N U button to move to the previous menu screen.
DEF G OK MENU
2 3
67
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T E X T button to switch off teletext. The previous mode reappears.
SIMPLE TEXT
TELETEXT
A
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The D / E button can be used to select the preceding or following page.
2
Programming a colour button in LIST mode
If the TV is in SIMPLE text, TOP text or FASTEXT mode, press the
M
button to switch to LIST mode.
Four teletext page numbers of your choice can be colour coded and easily selected by pressing the corresponding
coloured button on the remote control handset.
1 Press a coloured button.
2 Using the NUMBER buttons, select the page you wish to programme.
3 Press the O K button. The selected page is stored as the selected page number, blinking once to confirm this.
From now on, you can select this page with the same coloured button.
4 The three other coloured buttons are programmed in this way.
68
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the D button can be used.
The red button return to the previous selection. Alternatively the E button can be used.
A
Direct page selection
2
3
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
FASTEXT
A
1
2
3
4
TELETEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
Page selection
Press the i button to select the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
As with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or following page.
69
TELETEXT
SPECIAL TELETEXT FUNCTIONS
■
Press the T . O P T button and then use D
E
button to select the Text Option menu.
A TIME
When viewing a TV programme, press this button to display the time at the top
right hand corner of the screen. Press this button again to remove the display.
In the teletext mode, press this button to select a sub page number. The sub
page number is displayed at the bottom of the screen. To hold or change the
sub page, press the RED/GREEN, D / E or NUMBER buttons.
Press again to exit this function.
A SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
A UPDATE
Displays the TV picture on the screen while waiting for a new teletext page. The
display will appear at the top left hand corner of the screen. When the updated
page is available then display will change to the page number. Press this button
again to view the updated teletext page.
TELETEXT
?
A REVEAL
Press this button to display concealed information, such as solutions to riddles
or puzzles.
Press this button again to remove the information from the display.
i
A INDEX
Select the each index page.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of
2 or more sub pages. The number of sub pages and the sub page displayed is,
usually, shown on the screen below the time. When this button is pressed the
stop symbol is displayed at the top left-hand corner of the screen and the automatic page change is inactive. To continue press this button again.
A MIX
Displays the teletext pages superimposed on the TV picture.
To switch the TV picture off press this button again.
70
APPENDIX
TROUBLESHOOTING
The TV does not operate properly
Check to see if there is any object between the TV and the remote control causing an obstruction.
■ Are batteries installed with correct polarity (+ to +, - to -)?
■ Correct remote operating mode set: TV, STB, DVD etc.?
■ Install new batteries.
■
The remote control
does not work
Power is suddenly
turned off
Is the sleep time set?
Check the power control settings. Has the Power supply been interrupted.
■ Is Auto sleep activated on this station.
■
■
The video function does not work.
Check whether the TV is switched on.
Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted correctly into the mains?
■ Check your antenna direction and/or location.
■ Test the mains outlet by plugging another TV into the same outlet.
■
■
No picture &
No sound
P i c t u r e a p p e a r s s l o wly after switching on
■
This is normal, the image is muted during the TV startup process. Please contact your
service center, if the picture has not appeared after five minutes.
No or poor colour
or poor picture
Horizontal/vertical
bars or picture shaking
Poor reception on
some channels
Lines or streaks in
pictures
■
APPENDIX
Adjust Colour in menu option.
■ Allow a sufficient distance between the TV and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
■ Check for sources of possible interference.
■
■
■
Check antenna (Change the position of the antenna).
71
APPENDIX
The audio function does not work.
Press the V O L button.
■ Sound muted? Press M U T E button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK &
No sound
No output from one
of the speakers
Unusual sound from
inside the TV
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
There is a problem in PICTURE settings.
■
When the user
changes the picture
settings, the TV
automatically
converts back to the
initial settings after
a certain period of
time.
APPENDIX
72
It means that the TV is currently set to I n S t o r e mode.
To switch to H o m e mode you should do the followings:
From the TV Menu, choose O p t i o n -> F a c t o r y R e s e t -> Y e s (wait for a
few seconds for the TV to download again) -> Choose L a n g u a g e -> Choose
H o m e -> Press O K button -> OSD "W
W E L C O M E" appears -> Press O K button.
Program search will begin automatically (You can stop the search by pressing
the M E N U button). Now you have completed switching to the Home mode.
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then
use it to wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
■ Do not to use a wet cloth.
■
Extended Absence
G
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
APPENDIX
CAUTION
73
APPENDIX
PRODUCT SPECIFICATIONS
MODELS
Dimensions
(Width x Height x Depth)
with stand
without stand
with stand
Weight
without stand
Power requirement
22LF15R
26LF15R
22LF15R-TA
22LF15R-LA
26LF15R-TA
26LF15R-LA
522.2 x 431.5 x 189 mm
20.6 x 16.9 x 7.4 inches
663.3 x 508.2 x 227.3 mm
26.1 x 20 x 8.9 inches
522.2 x 384.2 x 69 mm
20.6 x 15.1 x 2.7 inches
663.3 x 449.8 x 80 mm
26.1 x 17.7 x 3.1 inches
5.6 kg / 12.3 lbs
5.34 kg / 11.7 lbs
10.1 kg / 22.2 lbs
8.6 kg / 18.9 lbs
AC100-240V~ 50/60Hz
AC100-240V~ 50/60Hz
32LF15R
MODELS
Dimensions
with stand
(Width x Height x Depth)
without stand
Weight
with stand
without stand
APPENDIX
Power requirement
801.7 x 544.1 x 79 mm
31.5 x 21.4 x 3.1 inches
13.35 kg / 29.4 lbs
11.85 kg / 26.1 lbs
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Programme Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
74
801.7 x 604.2 x 227.3 mm
31.5 x 23.8 x 8.9 inches
AC100-240V~ 50/60Hz
Television System
■
32LF15R-TA
32LF15R-LA
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
IR CODES
1. How to Connect
A
Connect your wired remote control to the Remote Control port on the TV.
2. Remote Control IR Codes
A
Output waveform
Single pulse, modulated with 37.917KHz signal at 455KHz
Carrier frequency
Tc
FCAR = 1/TC = fOSC/12
Duty ratio = T1/TC = 1/3
T1
A
Configuration of frame
1st frame
Lead code
Low custom code
High custom code
Data code
Data code
C0 C1 C2 C3 C4 C5 C6 C7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 D0 D1 D2 D3 D4 D5 D6 D7
Repeat frame
Repeat code
A
Tf
Lead code
APPENDIX
9 ms
4.5 ms
A
Repeat code
0.55 ms
9 ms
A
2.25 ms
Bit description
Bit ”0”
Bit ”1”
0.56 ms
0.56 ms
2.24 ms
1.12 ms
A
Frame interval: Tf
The waveform is transmitted as long as a key is depressed.
Tf
Tf
Tf=108ms @455KHz
75
APPENDIX
Code
(Hexa)
APPENDIX
76
Function
Note
Code
(Hexa)
Function
Note
0B
INPUT
R/C Button
09
MUTE
R/C Button
08
POWER
R/C Button (Power On/Off)
53
LIST
R/C Button
43
MENU
R/C Button
10 ~ 19 Number Key 0 ~ 9 R/C Button
44
OK
R/C Button
1A
Q.VIEW
R/C Button
72
RED
R/C Button
20
TEXT
R/C Button
71
GREEN
R/C Button
79
RATIO
R/C Button
63
YELLOW
R/C Button
61
BLUE
R/C Button
02
VOL G
R/C Button
03
VOL F
R/C Button
00
PR D
R/C Button
01
PR E
R/C Button
4D
PSM
R/C Button
52
SSM
R/C Button
0A
I/II
R/C Button
0E
SLEEP
R/C Button
22
MODE
R/C Button
24
MIX
R/C Button
26
TIME
R/C Button
2A
REVEAL
R/C Button
62
UPDATE
R/C Button
64
SIZE
R/C Button
65
HOLD
R/C Button
70
INDEX
R/C Button
0F
TV
R/C Button
APPENDIX
77
Download PDF

advertising