LG | 32LS3100 | LG 26LS3300 Owner’s Manual

OWNER’S MANUAL
LCD TV / LED LCD TV
Please read this manual carefully before operating
your set and retain it for future reference.
CS41**
LS310*
LS311*
LS315*
LS33**
LS30**
P/NO : MFL67452102 (1208-REV04)
Printed in Korea
www.lg.com
2
TABLE OF CONTENTS
ENGLISH
ENG
TABLE OF CONTENTS
2
TABLE OF CONTENTS
3
LICENSES
3
OPEN SOURCE SOFTWARE NOTICE
4
SAFETY INSTRUCTIONS
10
INSTALLATION PROCEDURE
10
ASSEMBLING AND PREPARING
10
15
16
17
21
23
24
24
Unpacking
Parts and buttons
Lifting and moving the TV
Setting up the TV
Mounting on a table
Mounting on a wall
Tidying cables
Not using the Desk-Type Stand
25
MAKING CONNECTIONS
25 Antenna connection
26Adapter connection
26 HDMI connection
27 Component connection
27 Composite connection
28 USB connection
28 Audio System connection
28
- External Stereo Connection
29
REMOTE CONTROL
30
WATCHING TV
30
30
30
30
31
32
32
32
33
33
34
Turning the TV on for the first time
Watching TV
Managing programmes
- Automatically setting up programme
- Manually setting up programme
- Editing your programme list
- Selecting a programme on the programme
list
- Using favourite programmes
Using additional options
- Adjusting aspect ratio
- Using the input list
35
ENTERTAINMENT
35
36
37
38
Connecting USB storage devices
Browsing files
Viewing photos
Listening to music
40
CUSTOMIZING TV SETTING
40
40
40
41
43
45
45
Accessing main menus
Customizing Settings
- SETUP Settings
- PICTURE Settings
- AUDIO Settings
- TIME Settings
- OPTION Settings
46
TELETEXT
46
46
46
46
46
46
47
Switch On/Off
Simple Text
- Page selection
- Programming a colour button in LIST
mode
Fastext
- Page selection
Special Teletext Function
48
MAINTENANCE
48
48
48
Cleaning your TV
- Screen, frame, cabinet and stand
- Power cord
48
TROUBLESHOOTING
50
SPECIFICATIONS
WARNING
yy If you ignore the warning message, you may
be seriously injured or there is a possibility
of accident or death.
CAUTION
yy If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
yy The note helps you understand and use
the product safely. Please read the note
carefully before using the product.
LICENSES / OPEN SOURCE SOFTWARE NOTICE
3
Supported licenses may differ by model. For more information about licenses, visit www.lg.com.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
OPEN SOURCE SOFTWARE NOTICE
To obtain the source code under GPL, LGPL, MPL and other open source licenses, that is contained in this
product, please visit http://opensource.lge.com .
In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of
performing such distribution (such as the cost of media, shipping and handling) upon email request to
opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the
product.
ENGLISH
ENG
LICENSES
4
SAFETY INSTRUCTIONS
ENGLISH
ENG
SAFETY INSTRUCTIONS
Please read these safety precautions carefully before using the product.
WARNING
Do not place the TV and remote control in the following environments:
yy
--A location exposed to direct sunlight
--An area with high humidity such as a bathroom
--Near any heat source such as stoves and other devices that produce heat
--Near kitchen counters or humidifiers where they can easily be exposed to steam
or oil
--An area exposed to rain or wind
--Near containers of water such as vases
Otherwise, this may result in fire, electric shock, malfunction or product deformation.
Do not place the product where it might be exposed to dust.
yy
This may cause a fire hazard.
Mains plug is the disconnecting device. The plug must remain readily operable.
yy
Do not touch the power plug with wet hands. Additionally, if the cord pin is wet or
yy
covered with dust, dry the power plug completely or wipe dust off.
You may be electrocuted due to excess moisture.
Make sure to connect the power cable to the grounded current. (Except for devices
yy
which are not grounded.)
You may be electrocuted or injured.
Fix the power cable completely.
yy
If the power cable is not fixed completely, a fire can break out.
Ensure the power cord does not come into contact with hot objects such as a
yy
heater.
This may cause a fire or an electric shock hazard.
Do not place a heavy object, or the product itself, on power cables.
yy
Otherwise, this may result in fire or electric shock.
Bend antenna cable between inside and outside building to prevent rain from
yy
flowing in.
This may cause water damaged inside the Product and could give an electric
shock.
When mounting a TV it on the wall, make sure not to install TV by hanging power
yy
and signal cables on the back of the TV.
It may cause fire, electric shock.
SAFETY INSTRUCTIONS
Do not drop the product or let it fall over when connecting external devices.
yy
Otherwise, this may result in injury or damage to the product.
Des
icca
nt
Keep the packing anti-moisture material or vinyl packing out of the reach of
yy
children.
Anti-moisture material is harmful if swallowed. If swallowed by mistake, force the
patient to vomit and visit the nearest hospital. Additionally, vinyl packing can cause
suffocation. Keep it out of the reach of children.
Do not let your children climb or cling onto the TV.
yy
Otherwise, the TV may fall over, which may cause serious injury.
Dispose of used batteries carefully to protect a child from eating them.
yy
Please seek Doctor- Medical Attention immediately if child consumes batteries.
Do not insert any metal objects/conductors (like a metal chopstick/cutlery
yy
screwdriver) between power cable plug and input Wall Socket while it is connected
to the input terminal on the wall. Additionally, do not touch the power cable right
after plugging into the wall input terminal.
You may be electrocuted.(Depending on model)
Do not put or store inflammable substances near the product. There is a danger
yy
of combustion/explosion or fire due to careless handling of the inflammable
substances.
Do not drop metallic objects such as coins, hair pins, chopsticks or wire into the
yy
product, or inflammable objects such as paper and matches. Children must pay
particular attention.
Electrical shock, fire or injury can occur. If a foreign object is dropped into the
product, unplug the power cord and contact the service centre.
Do not spray water on the product or scrub with an inflammable substance (thinner
yy
or benzene). Fire or electric shock accident can occur.
Do not allow a impact shock or any objects to fall into the product, and do not drop
yy
onto the screen with something.
You may be injured or the product can be damaged.
Never touch this product or antenna during a thunder or lighting storm.
yy
You may be electrocuted.
Never touch the wall outlet when there is leakage of gas, open the windows and
yy
ventilate.
It may cause a fire or a burn by a spark.
ENGLISH
ENG
Do not plug too many electrical devices into a single multiple electrical outlet.
yy
Otherwise, this may result in fire due to over-heating.
5
6
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not disassemble, repair or modify the product at your own discretion.
yy
Fire or electric shock accident can occur.
Contact the service center for check, calibration or repair.
If any of the following occur, unplug the product immediately and contact your local
yy
service centre.
--The product has been impacted by shock
--The product has been damaged
--Foreign objects have entered the product
--The product produced smoke or a strange smell
This may result in fire or electric shock.
If you don’t intend to use the product for a long time, unplug the power cable from
yy
the product.
Covering dust can cause a fire, or insulation deterioration can cause electric
leakage, electric shock or fire.
Apparatus shall not be exposed to dripping or splashing and no objects filled with
yy
liquids, such as vases, shall be placed on the apparatus.
SAFETY INSTRUCTIONS
Install the product where no radio wave occurs.
yy
There should be enough distance between an outside antenna and power lines to
yy
keep the former from touching the latter even when the antenna falls.
This may cause an electric shock.
Do not install the product on places such as unstable shelves or inclined surfaces.
yy
Also avoid places where there is vibration or where the product cannot be fully
supported.
Otherwise, the product may fall or flip over, which may cause injury or damage to
the product.
If you install the TV on a stand, you need to take actions to prevent the product
yy
from overturning. Otherwise, the product may fall over, which may cause injury.
If you intend to mount the product to a wall, attach VESA standard mounting interface (optional
yy
parts) to the back of the product. When you install the set to use the wall mounting bracket (optional
parts), fix it carefully so as not to drop.
Only use the attachments / accessories specified by the manufacturer.
yy
When installing the antenna, consult a qualified service man.
yy
This may create a fire hazard or an electric shock hazard.
We recommend that you maintain a distance of at least 2 to 7 times the diagonal
yy
screen size when watching TV.
If you watch TV for a long period of time, this may cause blurred vision.
Only use the specified type of battery.
yy
This could cause damage to the remote control.
Do not mix new batteries with old batteries.
yy
This may cause the batteries to overheat and leak.
Make sure there are no objects between the remote control and its sensor.
yy
Signal from the remote control may be disturbed by sun light or other strong light.
yy
In this case, darken the room.
When connecting external devices such as video game consoles, make sure the
yy
connecting cables are long enough.
Otherwise, the product may fall over, which may cause injury or damage the
product.
ENGLISH
ENG
CAUTION
7
8
SAFETY INSTRUCTIONS
ENGLISH
ENG
Do not turn the product On/Off by plugging-in or unplugging the power plug to the
yy
wall outlet. (Do not use the power plug for switch.)
It may cause mechanical failure or could give an electric shock.
Please follow the installation instructions below to prevent the product from
yy
overheating.
--The distance between the product and the wall should be more than 10 cm.
--Do not install the product in a place with no ventilation (e.g., on a bookshelf or in
a cupboard).
--Do not install the product on a carpet or cushion.
--Make sure the air vent is not blocked by a tablecloth or curtain.
Otherwise, this may result in fire.
Take care not to touch the ventilation openings when watching the TV for long
yy
periods as the ventilation openings may become hot. This does not affect the
operation or performance of the product.
Periodically examine the cord of your appliance, and if its appearance indicates damage or
yy
deterioration, unplug it, discontinue use of the appliance, and have the cord replaced with an exact
replacement part by an authorized servicer.
Prevent dust collecting on the power plug pins or outlet.
yy
This may cause a fire hazard.
Protect the power cord from physical or mechanical abuse, such as being twisted,
yy
kinked, pinched, closed in a door, or walked upon. Pay particular attention to plugs,
wall outlets, and the point where the cord exits the appliance.
Do not press strongly upon the panel with a hand or sharp object such as nail,
yy
pencil or pen, or make a scratch on it.
Avoid touching the screen or holding your finger(s) against it for long periods of
yy
time. Doing so may produce some temporary distortion effects on the screen.
When cleaning the product and its components, unplug the power first and wipe it
yy
with a soft cloth. Applying excessive force may cause scratches or discolouration.
Do not spray with water or wipe with a wet cloth. Never use glass cleaner, car or
industrial shiner, abrasives or wax, benzene, alcohol etc., which can damage the
product and its panel.
Otherwise, this may result in fire, electric shock or product damage (deformation,
corrosion or breakage).
As long as this unit is connected to the AC wall outlet, it is not disconnected from the AC power
yy
source even if you turn off this unit by SWITCH.
When unplugging the cable, grab the plug and unplug it.
yy
If the wires inside the power cable are disconnected, this may cause fire.
When moving the product, make sure you turn the power off first. Then, unplug the
yy
power cables, antenna cables and all connecting cables.
The TV set or power cord may be damaged, which may create a fire hazard or
cause electric shock.
SAFETY INSTRUCTIONS
Contact the service center once a year to clean the internal parts of the product.
yy
Accumulated dust can cause mechanical failure.
Refer all servicing to qualified service personnel. Servicing is required when the
yy
apparatus has been damaged in any way, such as power supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has
been dropped.
If the product feels cold to the touch, there may be a small “flicker” when it is turned
yy
on. This is normal, there is nothing wrong with product.
The panel is a high technology display product with resolution of two million to six
yy
million pixels. You may see tiny black dots and/or brightly coloured dots (red, blue
or green) at a size of 1 ppm on the panel. This does not indicate a malfunction and
does not affect the performance and reliability of the product.
This phenomenon also occurs in third-party products and is not subject to
exchange or refund.
You may find different brightness and colour of the panel depending on your
yy
viewing position(left/right/top/down).
This phenomenon occurs due to the characteristic of the panel. It is not related with
the product performance, and it is not malfunction.
Displaying a still image (e.g., broadcasting channel logo, on-screen menu, scene from a video
yy
game) for a prolonged time may cause damage to the screen, resulting in retention of the image,
which is known as image sticking. The warranty does not cover the product for image sticking.
Avoid displaying a fixed image on your television’s screen for a prolonged period (2 or more hours
for LCD, 1 or more hours for Plasma).
Also, if you watch the TV at a ratio of 4:3 for a long time, image sticking may occur on the borders of
the panel.
This phenomenon also occurs in third-party products and is not subject to exchange or refund.
Generated Sound
yy
“Cracking” noise: A cracking noise that occurs when watching or turning off the TV is generated by
plastic thermal contraction due to tempera-ture and humidity. This noise is common for products
where thermal deformation is required. Electrical circuit humming/panel buzzing: A low level noise is
generated from a high-speed switching circuit, which supplies a large amount of current to operate a
product. It varies depend-ing on the product.
This generated sound does not affect the performance and reliability of the product.
ENGLISH
ENG
When moving or unpacking the product, work in pairs because the product is
yy
heavy.
Otherwise, this may result in injury.
9
10 INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING
ENGLISH
ENG
NOTE
yy Image shown may differ from your TV.
yy Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual.
yy The available menus and options may differ from the input source or product model that you are
using.
yy New features may be added to this TV in the future.
yy The TV can be placed in standby mode in order to reduce the power consumption. And the TV should
be turned off if it will not be watched for some time, as this will reduce energy consumption.
yy The energy consumed during use can be significantly reduced if the level of brightness of the picture
is reduced, and this will reduce the overall running cost.
INSTALLATION PROCEDURE
1 Open the package and make sure all the accessories are included.
2 Attach the stand to the TV set.
3 Connect an external device to the TV set.
ASSEMBLING AND PREPARING
Unpacking
Check your product box for the following items. If there are any missing accessories, contact the local
dealer where you purchased your product. The illustrations in this manual may differ from the actual
product and item.
CAUTION
yy Do not use any unapproved items to ensure the safety and product life span.
yy Any damages or injuries by using unapproved items are not covered by the manufacturer’s warranty.
yy Some models have a thin film attached on to the screen and this must not be removed.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
yy For an optimal connection, HDMI cables and USB devices should have bezels less than 10 mm thick
and 18 mm width. Use an extension cable that supports USB 2.0 if the USB cable or USB memory
stick does not fit into your TV’s USB port.
B
B
A
A
*A <
= 10 mm
*B <
= 18 mm
ASSEMBLING AND PREPARING
Remote control and
batteries (AAA)
(����������
See p. 29)
Owner’s manual
Polishing cloth
(Depending on model)
Use this to remove dust
from the cabinet.
Screw for assembly
2EA, P4 x 16
(Only 22CS41**,
19/22LS33**)
( See p. 17, 19)
Screw for assembly
8EA, M4 x 20
(Only 26/32/42CS41**,
32/42LS310*, 32/42LS311*)
( See p. 18)
Screw for assembly
2EA, M4 x 14
(Only 26LS33**)
( See p. 17)
Screw for assembly
4EA, M4 x 14
4EA, P4 x 16
(Only 32LS33**, 42LS315*)
( See p. 17, 20)
Screw for assembly
4EA, P4 x 16
4EA, M4 x 20
(Only 32LS30**)
( See p. 20)
Screw for assembly
2EA, P4 x 16
4EA, M4 x 20
(Only 32LS315*)
( See p. 19)
Screw for fixing
(Only 26/32/42CS41**,
32/42LS310*, 32/42LS311*
32LS33**,32/42LS315*,
32LS30**)
(�����������
See p. ��)
Power Cord
Adapter
(Only 19/22/26LS33**)
( See p. 26)
Isolator
(Depending on model)
( See p. 13)
Ferrite core
(Depending on model)
( See p. 13)
Cable holder
(Depending on model)
( See p. 24)
Protection cover
(Only 26CS41**)
( See p. 24)
Protection cover
(Only 32CS41**, 32LS310*,
32LS311*)
( See p. 24)
Protection cover
(Only 42CS41**,
42LS310*, 42LS311*)
( See p. 24)
Protection cover
(Only 32LS30**)
( See p. 24)
Protection cover
(Only 32LS315*)
( See p. 24)
ENGLISH
ENG
or
11
12 ASSEMBLING AND PREPARING
ENGLISH
ENG
Stand Body / Stand Base
(Only 19/22/26LS33**)
( See p. 17)
Stand Body / Stand Base
(Only 32LS33**)
( See p. 17)
Stand Body / Stand Base
(Only 22CS41**)
( See p. 19)
Stand Body / Stand Base
(Only 26CS41**)
( See p. 18)
Stand Body / Stand Base
(Only 32/42LS310*, 32/42LS311*, 32/42CS41**)
( See p. 18)
Stand Body / Stand Base
(Only 32LS315*)
( See p. 19)
Stand Body / Stand Base
(Only 42LS315*)
( See p. 20)
Stand Body / Stand Base
(Only 32LS30**)
( See p. 20)
ASSEMBLING AND PREPARING
13
yy Antenna Isolator Installation Guide
-- Use this to install TV in a place where there is a voltage difference between TV Set and GND of
antenna signal.
»» If there is a voltage difference between TV Set and GND of antenna signal, the antenna contact
might be heated and excessive heat might cause an accident.
-- You can improve the safety when watching TV by efficiently removing power voltage from TV antenna. It is recommended to mount the isolator to the wall. If it cannot be mounted to the wall, mount it
on the TV. Avoid disconnecting the antenna Isolator after installation.
-- Before starting, be sure that the TV antenna is connected.
1. Connect to TV.
Wall
ANTENNA/
CABLE IN
Cable / Antenna
or
Isolator
2. Connect to Set-Top box.
Connect one end of the isolator to cable/antenna jack and the other to TV set or set-top box.
“Equipment connected to the protective earthing of the building installation through the mains
connection or through other equipment with a connection to protective earthing - and to a cable
distribution system using coaxial cable, may in some circumstances create a fire hazard. Connection
to a cable distribution system has therefore to be provided through a device providing electrical
isolation below a certain frequency range (galvanic isolator, see EN 60728-11)”
When applying the RF Isolator, a slight loss of signal sensitivity can occur.
NOTE
yy The items supplied with your product may vary depending on the model.
yy Product specifications or contents of this manual may be changed without prior notice due to upgrade
of product functions.
How to use the ferrite core
A ferrite core is used to reduce electromagnetic waves when the power cord is connected to the power
outlet. Put the ferrite core on the power cord as shown in the figure below by splitting it apart. It is
better to place the ferrite core as close to the TV and the power plug as possible.
(Gray)
[to a wall plug]
[to the TV]
[Figure]
[Cross Section of
Ferrite Core]
ENGLISH
ENG
NOTE
14 ASSEMBLING AND PREPARING
ENGLISH
ENG
CAUTION
yy Power Cord Installation Guide
-- If the power cord provided with TV looks like the below picture, please ensure that it is inserted in
the right direction.
TV
Power Cord
Correct
Wrong
ASSEMBLING AND PREPARING
15
A type :
ENGLISH
ENG
Parts and buttons
22/26/32/42CS41**,
19/22/26/32LS33**, 32/42LS310*,
32/42LS311*
B type :
32/42LS315*, 32LS30**
Remote control
sensor
Screen
Screen
Power indicator
Remote control
sensor
OK
Power
indicator
OK
Speakers
Speakers
SETTINGS
INPUT
Touch buttons
OK
OK
SETTINGS
SETTINGS INPUT
INPUT
buttons(Only
32/42LS315*)
buttons(Only 32LS30**)
Button
A type1
Description
B type
Scrolls through
the saved programmes.
H
H
Adjusts
the volume level.
H
H
OK ꔉ
SETTINGS
H
S
Selects the highlighted menu option or confirms an input.
Accesses the main menu, or saves your input and exits the menus.
INPUTH
Changes the input source.
/I
Turns the power on or off.
1 A type buttons are touch sensitive and can be operated through simple touch with your finger.
SETTINGS
INPUT
16 ASSEMBLING AND PREPARING
ENGLISH
ENG
Lifting and moving the TV
When moving or lifting the TV, read the following to
prevent the TV from being scratched or damaged
and for safe transportation regardless of its type
and size.
yy When transporting a large TV, there should be
at least 2 people.
yy When transporting the TV by hand, hold the TV
as shown in the following illustration.
CAUTION
yy Avoid touching the screen at all times, as
this may result in damage to the screen.
yy It is recommended to move the TV in the box
or packing material that the TV originally came
in.
yy Before moving or lifting the TV, disconnect the
power cord and all cables.
yy When holding the TV, the screen should face
away from you to avoid damage.
yy Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
speaker, or speaker grill area.
yy When transporting the TV, do not expose the
TV to jolts or excessive vibration.
yy When transporting the TV, keep the TV upright,
never turn the TV on its side or tilt towards the
left or right.
ASSEMBLING AND PREPARING
17
Image shown may differ from your TV.
19/22/26LS33**
Stand Body
1
ENGLISH
ENG
Setting up the TV
Screw(Stand+Head)
M4 x 14
32LS33**
4EA
1
P4 x 16
Stand Body
(Stand+Head)
Screw(Stand+Head)
14
M4 x 14
Stand Base
2
Stand Base
2
3
3
Model
Standard screw
Number of screws
19/22LS33**
26LS33**
P4 x 16
M4 x 14
2EA
2EA
4EA
M4 x 14
18 ASSEMBLING AND PREPARING
ENGLISH
ENG
26CS41**
32/42CS41**, 32/42LS310*, 32/42LS311*
1
1
4EA
M4 x 20
4EA
M4 x 20
Stand Body
Stand Body
Stand Base
Stand Base
2
2
3
3
4EA
4EA
M4 x 20
M4 x 20
ASSEMBLING AND PREPARING
22CS41**
1
ENGLISH
ENG
32LS315*
1
2EA
P4 x 16
Stand Body
Stand Body
Stand Base
2
2
2EA
P4 x 16
3
3
4EA
M4 x 20
Stand Base
19
20 ASSEMBLING AND PREPARING
ENGLISH
ENG
42LS315*
32LS30**
1
1
4EA
4EA
P4 x 16
P4 x 16
Stand Body
Stand Body
Stand Base
Stand Base
2
2
3
3
4EA
4EA
M4 x 14
M4 x 20
21
Adjusting the angle of the TV to suit view
CAUTION
yy When attaching the stand to the TV
set, place the screen facing down on a
cushioned table or flat surface to protect the
screen from scratches.
yy Make sure that the screws are inserted
correctly and fastened securely. (If they are
not fastened securely enough, the TV may
tilt forward after being installed.)
Do not use too much force and over tighten
the screws; otherwise screw may be
damaged and not tighten correctly.
(Only 32/42CS41**, 32/42LS310*, 32/42LS311*)
Swivel 20 degrees to the left or right and adjust the
angle of the TV to suit your view.
20˚
20˚
CAUTION
NOTE
yy Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
yy When adjusting the angle of the product,
watch out for your fingers.
»»Personal injury may occur if hands or fingers
are pinched. If the product is tilted too much, it
may fall, causing damage or injury.
Mounting on a table
1 Lift and tilt the TV into its upright position on a
table.
-- L
eave a 10 cm (minimum) space from the
wall for proper ventilation.
10 cm
10 cm
Securing the TV to a table
(Only 32/42LS310*, 32/42LS311*,
26/32/42CS41**, 32LS33**,32/42LS315*,
32LS30** )
Fix the TV to a table to prevent from tilting forward,
damage, and potential injury.
To secure the TV to a table, insert and tighten the
supplied screw on the rear of the stand.
m
10 c
10 cm
2 Connect the power cord to a wall outlet.
CAUTION
yy Do not place the TV near or on sources
of heat, as this may result in fire or other
damage.
WARNING
yy To prevent TV from falling over, the TV
should be securely attached to the floor/
wall per installation instructions. Tipping,
shaking, or rocking the TV may cause injury.
ENGLISH
ENG
se
ASSEMBLING AND PREPARING
22 ASSEMBLING AND PREPARING
ENGLISH
ENG
Securing the TV to a wall
(This feature is not available for all models.)
Using the Kensington security system
(Depending on model)
The Kensington security system connector is
located at the rear of the TV. For more information
of installation and using, refer to the manual
provided with the Kensington security system or
visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
1 Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
-- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2 Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
yy Make sure that children do not climb on or
hang on the TV.
NOTE
yy Use a platform or cabinet that is strong and
large enough to support the TV securely.
yy Brackets, bolts and ropes are not provided.
You can obtain additional accessories from
your local dealer.
ASSEMBLING AND PREPARING
A
Attach an optional wall mount bracket at the rear
of the TV carefully and install the wall mount
bracket on a solid wall perpendicular to the
floor. When you attach the TV to other building
materials, please contact qualified personnel.
LG recommends that wall mounting be performed
by a qualified professional installer.
10 cm
10 cm
10 cm
10 cm
Make sure to use screws and wall mount bracket
that meet the VESA standard. Standard
dimensions for the wall mount kits are described in
the following table.
Separate purchase(Wall Mounting Bracket)
Model
VESA (A x B)
Standard screw
Number of
screws
Wall mount
bracket
Model
VESA (A x B)
Standard screw
Number of
screws
Wall mount
bracket
22CS41**
32LS310*
19/22/26LS33** 32LS311*
26/32CS41**
32LS33**
32LS315*
32LS30**
100 x 100
200 x 100
M4
M4
4
4
LSW100B
LSW100B
42LS310*
42LS311*
42CS41**
42LS315*
200 x 200
M6
4
LSW200BX
LSW220BX
B
CAUTION
yy Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
yy If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
yy Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
yy Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the manufacturer’s
warranty.
NOTE
yy Use the screws that are listed on the VESA
standard screw specifications.
yy The wall mount kit includes an installation
manual and necessary parts.
yy The wall mount bracket is not provided. You
can obtain additional accessories from your
local dealer.
yy The length of screws may differ depending
on the wall mount. Make sure to use the
proper length.
yy For more information, refer to the manual
supplied with the wall mount.
ENGLISH
ENG
Mounting on a wall
23
24 ASSEMBLING AND PREPARING
ENGLISH
ENG
Tidying cables
Gather and bind the cables with the Cable Holder.
(Only19LS33**)
(Only 26/32/42CS41**, 32/42LS310*, 32/42LS311*)
1 Gather and bind the cables with the Cable Management.
2 Fix the cable management firmly to the TV.
Cable Management
Cable Holder
(Only 22/26LS33**)
CAUTION
yy Do not move the TV by holding the cable
management, as the cable management may break,
and injuries and damage to the TV may occur.
Not using the Desk-Type Stand
Cable Holder
(Only 26/32/42CS41**, 32/42LS310*, 32/42LS311*,
32LS315*, 32LS30**)
• When installing the wall mounting bracket, use the
Protection cover. This will protect the opening
from accumulating dust and dirt.
Push the supplied protection cover into the opening at
the bottom of the TV until it locks in place.
(Only 32LS33**, 32/42LS315*, 32LS30**)
NOTE
Cable Holder
Protection cover
(Only 32LS315*)
yy When removing Protection Cover from
bottom of TV insert your fingers into hole of
cover hold firmly and pull upwards towards
you to remove.
CAUTION
yy Do not move the TV by holding the cable
holder, as the cable holders may break, and
injuries and damage to the TV may occur.
Protection cover
MAKING CONNECTIONS
Antenna connection
Connect the TV to a wall antenna socket with an
RF cable (75 Ω).
This section on MAKING CONNECTIONS
mainly uses diagrams for the CS41** models.
Connect various external devices to the TV
and switch input modes to select an external
device. For more information of external device’s
connection, refer to the manual provided with each
device.
Available external devices are: HD receivers,
DVD players, VCRs, audio systems, USB storage
devices, gaming devices, and other external
devices.
ANTENNA IN
NOTE
yy The external device connection may differ
from the model.
yy Connect external devices to the TV
regardless of the order of the TV port.
yy If you record a TV program on a DVD
recorder or VCR, make sure to connect the
TV signal input cable to the TV through a
DVD recorder or VCR. For more information
of recording, refer to the manual provided
with the connected device.
yy Refer to the external equipment’s manual for
operating instructions.
yy If you connect a gaming device to the TV,
use the cable supplied with the gaming
device.
NOTE
yy Use a signal splitter to use more than 2 TVs.
yy If the image quality is poor, install a signal
amplifier properly to improve the image
quality.
yy If the image quality is poor with an antenna
connected, try to realign the antenna in the
correct direction.
yy An antenna cable and converter are not
supplied.
ENGLISH
ENG
MAKING
CONNECTIONS
25
26 MAKING CONNECTIONS
ENGLISH
ENG
Adapter connection
HDMI connection
(Only 19/22/26LS33**)
Transmits the digital video and audio signals from
an external device to the TV. Connect the external
device and the TV with the HDMI cable as shown.
DC IN
DC Adapter
1 Connect the antenna cable to the antenna
input port on the TV.
2 Connect the DC adapter plug to the power
input jack on the TV.
IN
3 Connect the power cord to the DC adapter first,
then plug the power cord into the wall power
outlet.
CAUTION
yy Please be sure to connect the TV to the DC
power adapter before connecting the TV’s
power plug to a wall power outlet.
DVD/ Blu-Ray /
HD Cable Box
/ HD STB
(*Not Provided)
HDMI
NOTE
yy It is recommended to use the TV with the
HDMI connection for the best image quality.
yy High Speed HDMI™ Cables are tested to
carry an HD signal up to 1080p and higher.
yy Supported HDMI Audio format : PCM
(32k/44.1k/48k, DTS Not supported.)
MAKING CONNECTIONS
27
Composite connection
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with a component cable as
shown.
Transmits analog video and audio signals from an
external device to the TV. Connect the external
device and the TV with th e composite cable as
shown.
AV IN
VIDEO
Y
PB
VIDEO
AUDIO R
L/MONO
PR
L
R
AUDIO
COMPONENT
IN
AV IN
VIDEO
Y
PB
VIDEO
AUDIO R
L/MONO
PR
L
AUDIO
RED
WHITE
YELLOW
RED
WHITE
RED
BLUE
GREEN
RED
WHITE
YELLOW
RED
WHITE
RED
BLUE
GREEN
R
VIDEO
VIDEO
COMPONENT
IN
(*Not Provided)
(*Not Provided)
L
R
L (MONO) AUDIO R
AUDIO
DVD / Blu-Ray / HD Cable Box
NOTE
yy If cables are not installed correctly, it could
cause this image to display in black and
white or with distorted colours.
VCR / DVD / Blu-Ray / HD Cable Box
ENGLISH
ENG
Component connection
28 MAKING CONNECTIONS
Audio System connection
Connect a USB storage device such as a USB
flash memory or a USB memory card reader to the
TV.
Use an external audio system instead of the builtin speaker.
External Stereo Connection
Use to connect to an external amplifier, or
surround sound system.
USB IN
ENGLISH
ENG
USB connection
USB
(*Not Provided)
IN
L-AUDIO OUT-R
L
R
AUDIO IN
External Stereo
ANTENNA IN
REMOTE CONTROL
29
The descriptions in this manual are based on the buttons on the remote control.
Please read this manual carefully and use the TV correctly.
To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching
the
and
ends to the label inside the compartment, and close the battery cover.
To remove the batteries, perform the installation actions in reverse.
CAUTION
yy Do not mix old and new batteries, as this may damage the remote control.
yy In Analogue TV and some countries, some remote control buttons may not work.
Make sure to point the remote control toward the remote control sensor on the TV.
TV
1
Q.VIEW
LIST
EXIT
SETTINGS
PSM
SSM
FAV
P
P
A
G
E
MUTE
RATIO
HOLD
ꕀ
TIME
ꔾ
TEXT
INDEX
REVEAL
UPDATE
ꔽ
Turns the TV on or off.
(POWER)
ꔻ
ꔼ
2
Returns to the TV viewing from any mode.
Changes the input source.
These access special functions in some menus.
1 Coloured buttons
(
: Red,
: Green,
: Yellow,
: Blue)
0 to 9 number buttons Selects a programme.
Selects numbered items in a menu.
Accesses the saved programme list.
Returns to the previously viewed programme.
Accesses the main menus.
Clears all on-screen displays and return to TV
viewing.
Navigation buttons
Scrolls through menus or options.
(up/down/left/right)
Selects menus or options and confirms your
input.
PSM
Recalls your preferred picture setting.
SSM
Recalls your preferred sound setting.
Adjusts the volume level.
Accesses your favourite programme list.
I/II
Selects the sound output.
Mutes all sounds.
MUTE
PAGE
Control buttons
( , , ,
,
2 TELETEXT
BUTTONS
)
Scrolls through the saved programmes.
Moves to the previous or next screen.
Controls the USB menus.
Resizes an image.
These buttons are used for teletext.
For further details, see the ‘Teletext’ section.
ENGLISH
ENG
REMOTE CONTROL
30 WATCHING TV
ENGLISH
ENG
WATCHING TV
Turning the TV on for the
first time
When you turn the TV on for the first time, the
Initial setting screen appears. Select a language
and customize the basic settings.
1 Connect the power cord to a power outlet.
2 In Standby mode, press (POWER) to turn
the TV on.
The Initial setting screen appears if you turn
the TV on for the first time.
NOTE
yy You can also access Factory Reset by
accessing Option menu.
3 Follow the on-screen instructions to customize
your TV settings according to your preferences.
Language

Auto Tuning
Watching TV
1 In Standby mode, press
the TV on.
(POWER) to turn
2 Press INPUT and select TV.
3 To turn the TV off, press (POWER).
The TV switches to Standby mode.
Managing programmes
Automatically setting up
programme
Use this to automatically find and store all
available programmes.
1 Press SETTINGS and the Navigation buttons
to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Auto Tuning.
3 Select To Set and press the Navigation buttons
to scroll to System. Select your desired
system.
Selects a language to
display.
4 Press the Navigation buttons to scroll to
Storage From and select the initial programme
number.
Scans and saves available
programmes automatically.
5 Press the Navigation buttons to scroll to
Search and select To Start to begin auto
tuning.
4 When the basic settings are complete,
press OK.
NOTE
yy If you do not complete the Initial setting, it
will appear whenever the TV turns on.
yy Disconnect the power cord from the power
outlet when you do not use the TV for a long
period of time.
5 To turn the TV off, press
(POWER).
The TV scans and saves available programmes
automatically.
6 When you return to the previous menu, press
SETTINGS.
WATCHING TV
Manual Tuning lets you manually tune and arrange
the stations in whatever order you desire.
1 Press SETTINGS and the Navigation buttons
to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Storage.
4 Press the Navigation buttons or Number
buttons to select the desired programme
number.
5 Press the Navigation buttons to scroll to
System.
6 Press the Navigation buttons to scroll to
TV System.
7 Press the Navigation buttons to scroll to
Band.
8 Press the Navigation buttons to scroll to
V/UHF or Cable.
9 Press the Navigation buttons to scroll to
Channel.
Press the Navigation buttons and then select
the desired programme number with the
Navigation buttons or Number buttons.
10 Press the Navigation buttons to scroll to
Search.
11 Press the Navigation buttons to scroll and start
Searching.
12 Press the OK to store it.
13 When you return to the previous menu, press
SETTINGS.
NOTE
yy To store another programme, repeat steps 3
to 11.
Assigning a station name
You can assign a station name with five characters
to each programme number.
1 Press SETTINGS and the Navigation buttons
to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Name.
4 Press the Navigation buttons to scroll to select
the position and make your choice of the
second character, and so on. You can use an
the alphabet A to Z, the number 0 to 9, +/ -, and
blank and press OK.
5 Press the OK to store it.
6 When you return to the previous menu, press
SETTINGS.
Fine Tuning
Normally fine tuning is only necessary if reception
is poor.
1 Press SETTINGS and the Navigation buttons
to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Manual Tuning.
3 Press the Navigation buttons to scroll to
Fine.
4 Press the Navigation buttons to fine tune for
the best picture and sound.
5 Press the OK to store it.
6 When you return to the previous menu, press
SETTINGS.
ENGLISH
ENG
Manually setting up programme
31
32 WATCHING TV
ENGLISH
ENG
Editing your programme list
When a programme number is skipped, it means
that you will be unable to select it using P + button during TV viewing.
If you wish to select the skipped programme,
directly enter the programme number with the
NUMBER buttons or select it in the Programme
edit menu.
This function enables you to skip the stored
programmes.
1 Press SETTINGS and the Navigation buttons
to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Programme Edit.
3 Select To Set and edit programmes using the
following buttons.
Button
Description
Deletes a programme.
Press the Red button twice. The
Red button
selected programme is deleted,
all the following programmes are
shifted up one position.
Moves a programme.
Green button Press the Green button again to
release this function.
Selects a programme number to
be skipped. Press the Blue button
Blue button
again to release the skipped programme.
4 When you return to the previous menu, press
SETTINGS.
Selecting a programme on the
programme list
1 Press LIST to access the programme list.
2 Press the Navigation buttons to select to
desired programme and press OK.
3 When you return to the previous menu, press
LIST.
NOTE
yy You may find some blue programmes. They
have been set up to be skipped by auto
programming or in the programme edit
mode.
yy Some programmes with the channel number
shown in the programme list indicate there
is no station name assigned.
Using favourite programmes
Add the programmes that you watch frequently to
the favourite list.
1 Press SETTINGS and the Navigation buttons
to scroll to SETUP.
2 Press the Navigation buttons to scroll to
Favourite Programme.
3 Press the Navigation buttons and the Number
buttons to select to the desired programme.
4 To store another programme, repeat steps 3.
You can store up to 8 programmes.
5 When you return to the previous menu, press
SETTINGS.
NOTE
yy Press Yellow button to access directly to
the stored Favourite Programme. Press
the Yellow button again to shift the stored
Favourite Programme.
WATCHING TV
- 14:9 : You can view a picture format of 14:9
or a general TV programme in the 14:9 mode.
The 14:9 screen is viewed in the same way as
in 4:3, but is moved to the up and down.
(This function works in RF/AV Mode.)
Adjusting aspect ratio
Resize an image to view at its optimal size by
pressing RATIO while you are watching TV.
NOTE
yy You can also change the image size by
accessing Aspect Ratio in the PICTURE
menus.
yy You can adjust the enlarge proportion using
the Navigation buttons.
- Zoom 1 : The following selection will allow you
to view the picture without any alteration, while
filling the entire screen. However, the top and
bottom of the picture will be cropped.
(This function works in RF/AV Mode.)
- 16:9: Resizes images to fit the screen width.
(This function works in RF/AV/Component/
HDMI/USB Mode.)
- Zoom 2 : Choose Zoom 2 when you wish the
picture to be altered, both horizontally extended
and vertically cropped. The picture adopting
a compromise between alteration and screen
coverage.
(This function works in RF/AV Mode.)
- Original: When your TV receives a wide
screen signal it will automatically change to the
picture format broadcasted.
(This function works in RF/AV Mode.)
- 4:3: Resizes images to the previous standard
4:3.
(This function works in RF/AV/Component/
HDMI Mode.)
- Just Scan: Displays video images in the origi
nal size without removing parts of the edge of
the image.
(This function works in Component/HDMI
(720P/1080i/1080p) Mode.)
NOTE
yy If you enlarge or reduce an image, the
image may be distorted.
ENGLISH
ENG
Using additional options
33
34 WATCHING TV
ENGLISH
ENG
Using the input list
Selecting an input source
1 Press INPUT to access the input sources.
-The connected device displays on each input
source.
2 Press the Navigation buttons or input button
to scroll to one of the input sources and press
OK.
Image shown may differ from your TV.
yy
Input
TV
AV
Component
HDMI
USB
mv OK
Input source
Description
TV
Watch TV over the air and digital
cable broadcast.
AV
Watch video from a VCR or other
external devices.
Component Select it when using the DVD or
the Digital set-top box depends
on connector.
HDMI
Watch video from a HTS or other
high definition devices.
USB
Select it when using USB depends on connector.
ENTERTAINMENT
(Depending on model)
Image shown may differ from your TV.
yy
Connecting USB storage
devices
USB IN
Connect USB storage devices such as a USB
flash memory to the TV and use multimedia
features (See “Browsing files” on page 36).
Connect a USB flash memory or USB memory
card reader to the TV as shown on the following
illustration.
CAUTION
yy Back up your files saved on a USB storage
device frequently, as you may lose or
damage the files and this may be not
covered by the manufacturer’s warranty.
Tips for using USB storage devices
yy Only a USB storage device is recognizable.
yy If the USB storage device is connected through
a USB hub, the device is not recognizable.
yy A USB storage device using an automatic
recognition programme may not be recognized.
yy A USB storage device which uses its own
driver may not be recognized.
yy The recognition speed of a USB storage device
may depend on each device.
yy Please do not turn off the TV or unplug
the USB device when the connected USB
storage device is working. When such device
is suddenly separated or unplugged, the
stored files or the USB storage device may be
damaged.
yy Please do not connect the USB storage
device which was artificially manoeuvred on
the PC. The device may cause the product to
malfunction or fail to be played. Never forget
to use only a USB storage device which has
normal music files, image files.
yy Please use only a USB storage device which
was formatted as a FAT16 or FAT32 file
system.
yy Please connect a USB storage device with the
cable offered by the device maker.
yy Some USB storage devices may not be
supported or operated smoothly.
yy Be sure to back up important files since data
stored in a USB memory device may be
damaged. We will not be responsible for any
data loss.
yy If a USB memory device is connected to a USB
multi-card reader, its volume data may not be
detected.
yy If the USB memory device does not work
properly, disconnect and reconnect it.
yy How fast a USB memory device is detected
differs from device to device.
yy The recommended capacity is 32 GB or less
for USB memory.
yy Any device with more than the recommended
capacity may not work properly.
yy USB storage devices below USB 2.0 are
supported as well. But they may not work
properly in the movie list.
yy Maximum of 999 folders or files can be
recognized under one folder.
yy If there are a lot of folders or files all within one
folder, the device may not be able to access
these properly.
ENGLISH
ENG
ENTERTAINMENT
35
36 ENTERTAINMENT
ENGLISH
ENG
Browsing files
Supported file format
Access the photo or music lists and browse files.
Type
Photo
1 Connect a USB storage device.
2 Press INPUT button to scroll to Input menus.
3 Press the Navigation buttons to scroll to USB
and press OK.
Music
OK
Photo List
2
Page 1/1
001
002
003
004
3
005
1
UP Folder
Move
No.
Option
ꔵ Page Change
ꘂ Mark
1
Description
Moves to upper level folder
2
Current page/Total pages
ꕯ Exit
Contents under the current folder
Button
Description
ꘂ Marks or Unmarks each file.
3
MP3
Bit rate 32kbps to 320kbps
yySampling rate MPEG1 Layer3 : 32
kHz, 44.1 kHz, 48 kHz
yySampling rate MPEG2 Layer3 : 16
kHz, 22.05 kHz, 24 kHz
yySampling rate MPEG2.5 Layer3 : 8
kHz, 11.025 kHz, 12 kHz
Photo List
Music List
JPEG
Baseline : 64 x 64 to 8192 x 8192
Progressive : 64 x 64 to 1024 x 768
yy
You can play JPEG files only.
yy
Non-supported files are displayed
in the form of predefined icon.
4 Press the Navigation buttons to scroll to Photo
List or Music List and press OK.
USB
Supported file format
37
ENTERTAINMENT
Using photo options
View image files saved in a USB storage device.
The displays on the screen may differ from the
model.
Use the following options while viewing photos.
1 Press INPUT button to access the Input
menus.
2 Press the Navigation buttons to scroll to USB
and press OK.
3 Press the Navigation buttons to scroll to Photo
List and press OK.
4 Press the Navigation buttons to scroll to a
folder you want and press OK.
Photo List
Page 1/1
001
002
003
004
005
UP Folder
Move
ꔵ Page Change
Option
ꘂ Mark
ꕯ Exit
Photo List
Page 1/1
001
002
003
ꔵ Page Change
ꘂ Mark
ꔆ
►
Option
06
Close
Number of selected photos
The supported photo size is
yy
limited. You cannot rotate a
photo if the resolution of the
rotated width is larger than
the supported resolution
size.
ꕯ Exit
6 View photos.
Description
View Marked Display the selected photo file.
Mark All
꘤
NOTE
005
Menu
BGM
Option
Description
Slideshow Starts or stops a slideshow with
selected photos.
If there are no selected photos, all
photos saved in the current folder
display during a slideshow.
To set a slideshow speed, select
Option.
BGM
Turns the background music on or
off. To set the background music
folder, select Option.
(Rotate) Rotates photos clockwise (90°,
180°, 270°, 360°).
UP Folder
Option
Slideshow
Options
004
Move
001 / 005
►
5 Press the Navigation buttons to scroll to a file
you want and press OK.
◄
►
Option
Mark all photo files on the screen.
Unmark All Deselect all marked photo files.
Slide Speed: Selects a slideshow
yy
speed (Fast, Medium, Slow).
BGM: Selects a music folder for
yy
the background music.
NOTE
You cannot change the
yy
music folder while the
background music is playing.
You can only select the MP3
yy
folder saved on the device
that currently displays the
photo.
NOTE
Non-supported files are displayed the
yy
preview image by icon only
.
Abnormal files are displayed in the form of
yy
bitmap
.
Close
The option bar at the bottom of the
screen disappears.
ENGLISH
ENG
Viewing photos
38 ENTERTAINMENT
ENGLISH
ENG
Listening to music
1
Press INPUT button to access the Input
menus.
2
Press the Navigation buttons to scroll to USB
and press OK.
3
Press the Navigation buttons to scroll to Music
List and press OK.
4
Press the Navigation buttons to scroll to a
folder you want and press OK.
5
Press the Navigation buttons to scroll to a file
you want and press OK.
Music List
Page 1/1
Title
Duration
UP Folder
UP Folder
001.mp3
0 : 00
002.mp3
0 : 00
003.mp3
004.mp3
0 : 00
0 : 00
ꔵ Page Change
Option
Move
ꘂ Mark
ꕯ Exit
Music List
Page 1/1
ꕞ
Title
002.mp3
0:00
/0:00
003.mp3
004.mp3
UP Folder
Move
Play
BGM
Mark All
001.mp3
Option
ꘂ Mark
7
Control playback by using the following buttons.
Music List
0 : 00
0 : 00
Page 1/1
ꕞ
Title
UP Folder
Move
Button
r
s
t
w
v
v or w
EXIT
ꕌ or ꕍ
Duration
UP Folder
0:00
► /4:06
0 : 00
0 : 00
Close
ꔵ Page Change
Play music.
Duration
Menu
UP Folder
6
Option
001.mp3
♪ 3 : 12
002.mp3
3 : 12
003.mp3
004.mp3
3 : 12
3 : 12
ꔵ Page Change
ꘂ Mark
ꕯ Exit
Description
Stops playback
Plays a music file
Pauses or resumes playback
Skips to the next file
Skips to the previous file
When playing,
When you press the v button, the
previous music file will be played.
When you press the w button, the
next music file will be played.
When you press the EXIT button,
only the music will be stopped and
the player will not return to normal
TV viewing.
When using the ꕌorꕍ button during
playback a cursor indicating the position can be played.
ꕯ Exit
Tips for playing music files
Menu
Description
Play
Plays a music file.
BGM
Start playing the selected music
files and then move to the Photo
List.
Mark All
Mark all music files on the screen.
This unit cannot support the ID3 Tag
yy
embedded MP3 files.
ENTERTAINMENT
yy
Abnormal files are displayed in the form of
bitmap
.
yy
A damaged or corrupted music does not play
but displays 00:00 in playtime.
yy
A music downloaded from a paid service with
copyright protection does not start but displays inappropriate information in playtime.
yy
If you press OK button, screen saver is
stopped.
yy
The PLAY(s), Pause(t), r , w, v
buttons on the remote control are also available in this mode.
yy
You can use the w button to select the
next music and the v button to select the
previous music.
file name
ꕞ
0:00
► /4:06
UP Folder
Title
UP Folder
Duration
001.mp3
♪ 3 : 12
002.mp3
3 : 12
003.mp3
004.mp3
3 : 12
3 : 12
Time elapsed
ENGLISH
ENG
NOTE
39
40 CUSTOMIZING TV SETTING
ENGLISH
ENG
CUSTOMIZING TV SETTING
Image shown may differ from your TV.
yy
Accessing main menus
1 Press SETTINGS to access the main menus.
2 Press the Navigation buttons to scroll to one of the following menus and press OK.
3 Press Navigation buttons to scroll to the setting or option you want and press OK.
4 When you are finished, press EXIT.
Menu
Description
SETUP
Sets up and edit programmes.
PICTURE
Adjusts the image size, quality, or effect.
AUDIO
Adjusts the sound quality, effect, or volume level.
TIME
Sets the time, date, or timer feature.
OPTION
Customizes the general settings.
??
?
?
?
Customizing
Settings
Image shown may differ from your TV.
yy
SETUP Settings
1 Press SETTINGS and the Navigation buttons to scroll to
Setup.
2 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3 When you return to the previous menu, press SETTINGS.
The available programme settings are described in the following:
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
mv◄s OK Settings
Setting
Auto Tuning
Description
Tunes and stores all available programmes through antennas inputs ( See p. 30).
Manual Tuning
Tunes and stores the programmes you want manually ( See p. 31).
Programme Edit
Edits programmes ( See p. 32).
Favourite Programme
Selects your favourite programmes directly( See p. 32).
CUSTOMIZING TV SETTING
Image shown may differ from your TV.
yy
1 Press SETTINGS and the Navigation buttons to scroll to
Picture.
2 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3 When you return to the previous menu, press SETTINGS.
Picture
Aspect Ratio
Energy Saving
Picture Mode
• Backlight
100
• Contrast
100
• Brightness
50
• Sharpness
70
• Colour
70
• Tint
mv◄s OK MENU 0
• Advanced
• Picture Reset
The available picture settings are described in the following.
Setting
Aspect Ratio
Energy Saving
Description
Changes the image size to view images at its optimal size ( See p. 33).
Reduces the power consumption by adjusting the screen brightness.
Option
Off
The Energy Saving is off
Minimum/
Selects the brightness level.
Medium/
Maximum
Screen off
The screen turns off in 3 seconds.
NOTE
yyWhen you select Screen Off, the screen will be turned off in 3 seconds and
Screen Off will start.
If you adjust “Energy Saving- Minimum, Medium, Maximum”, Backlight feature
yy
will not work.
Picture Mode
Selects one of the preset image or customizes options in each mode for the best TV
screen performance. You are also able to customize advanced options of each mode.
Mode
Vivid
Adjusts the video image for the retail environment by enhancing the
contrast, brightness, colour, and sharpness.
Standard
Adjusts the image for the normal environment.
Cinema
Optimizes the video images for a cinematic look to enjoy movies as if
you are in a movie theatre.
ENGLISH
ENG
PICTURE Settings
41
42 CUSTOMIZING TV SETTING
ENGLISH
ENG
Basic image options
Setting
Backlight
Description
Adjusts the brightness of the screen by controlling the LCD backlight. If you
decrease the brightness level, the screen becomes darker and the power
consumption will be reduced without any video signal loss.
Contrast
Increases or decreases the gradient of the video signal. You may use Contrast
when the bright part of the picture is saturated.
Adjusts the base level of the signal in the picture.
Brightness
Sharpness
Colour
Adjusts the level of crispness in the edges between the light and dark areas of the
picture. The lower the level, the softer the image.
Adjusts intensity of all colours.
Tint
Adjusts the balance between red and green levels.
Advanced
Customizes the advanced options.
Picture Reset
Restores the options of each mode to the factory default.
Advanced image options (Depending on model)
Setting
Dynamic Contrast
Dynamic Colour
Noise Reduction
Black Level
Film Mode
Colour
Temperature
Description
Adjusts the contrast to keep it at the best level according to the brightness of the
screen. The picture is improved by making bright parts brighter and dark parts
darker.
Adjusts screen colours so that they look livelier, richer and clearer. This feature
enhances hue, saturation and luminance so that red, blue and green white look
more vivid.
Reduces screen noise without compromising video quality.
ets black level of the screen to proper level. This function is available in the
S
following modes: RF, AV or HDMI.
»»Low: The reflection of the screen gets darker.
»»High: The reflection of the screen gets brighter.
Makes video clips recorded in film look more natural.
This feature operates only in RF or AV mode 480i/576i.
Choose one of three automatic colour adjustments. Set to warm to enhance hotter
colours such as red, or set to cool to see less intense colours with more blue.
You can control red, green, blue to adjust colour details.
CUSTOMIZING TV SETTING
Image shown may differ from your TV.
yy
1 Press SETTINGS and the Navigation buttons to scroll to
Audio.
2 Press the Navigation buttons to scroll to the setting or
option you want and press OK.
3 When you return to the previous menu, press SETTINGS.
Audio
Sound Mode
• Treble
• Bass
• Reset
Auto Volume
Balance
50
50
0
mv◄s OK Settings
The available audio settings are described in the following.
Setting
Sound Mode
Description
Selects one of the preset sound modes or customizes options in each mode.
Mode
Standard
Music
Cinema
Option
Treble
Bass
Reset
Auto Volume
Balance
Select when you want standard-quality sound.
Select when you listen to music.
Select when you watch movies.
Controls the dominant sounds in the output. When you turn up the
treble, it will increase the output to the higher frequency range.
Controls the softer sounds in the output. When you turn up the bass,
it will increase the output to the lower frequency range.
Resets the sound mode to the default setting.
Activates the Auto Volume feature to keep the volume level consistent whenever you
change channels. The volume level may not be consistent due to different signal
conditions of broadcasting stations.
Adjust balance between the left and right speakers according to your room environment.
ENGLISH
ENG
AUDIO Settings
43
44 CUSTOMIZING TV SETTING
ENGLISH
ENG
This feature may not be applied based on country broadcasting circumstance.
Stereo/Dual Reception
When a programme is selected, the sound information for the station appears with the programme
number and station name.
1 Press I/II button to select the Multi Audio menu.
Broadcast
Mono
Stereo
Dual
NICAM
On Screen Display
MONO
STEREO
DUAL I , DUAL II , DUAL I + II
NICAM
yy
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of
sound is improved.
yy
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to DUAL I,
DUAL II or DUAL I+II.
DUAL I DUAL I I DUAL I+I I Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
Nicam Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous
Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received.
1 When NICAM mono is received, you can select NICAM MONO or FM MONO.
2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO.
If the stereo signal is weak, switch to FM MONO.
3 When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or
FM MONO.
Speaker Sound Output Selection
In AV, Component, HDMI mode, you can select output sound for the left and right loudspeakers.
Select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is
sent to the right loudspeaker.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
CUSTOMIZING TV SETTING
Image shown may differ from your TV.
yy
1 Press SETTINGS and the Navigation buttons to scroll to
Time.
Time
Clock
Off Time
On Time
Sleep Timer
2 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
3 When you return to the previous menu, press SETTINGS.
mv◄s OK Settings
The available time settings are described in the following
Setting
Clock
Description
Sets the time.
Off Time/On Time Sets the time to turn on or off the TV automatically. To use this function, you should
set the current time and date in advance.
NOTE
If you do not press any button within 2 hours after the TV turns on by the
yy
On Time feature, the TV enters the Standby mode automatically.
If you set both Off time and On time features to the same time, the Off time
yy
feature overrides the On time feature.
Sleep Timer
Sets the length of time until the TV to turns off. When you turn the TV off and turn it
on again, the Sleep timer feature will be set to off.
OPTION Settings
Image shown may differ from your TV.
yy
1 Press SETTINGS and the Navigation buttons to scroll to
Option.
2 Press the Navigation buttons to scroll to the setting or option
you want and press OK.
Option
Language
Key Lock
Factory Reset
3 When you return to the previous menu, press SETTINGS.
mv◄s OK Settings
The available general settings are described in the following:
Setting
Language
Selects a language for the display.
Description
Key Lock
Activates or deactivates the lock system.
Factory Reset Resets the TV to factory default and erases all stored programmes.
Customizes the TV settings to suit your preference. The factory reset screen will appear
when you turn on the TV for the first time.
ENGLISH
ENG
TIME Settings
45
46 TELETEXT
ENGLISH
ENG
TELETEXT
Programming a colour button in
yy
This feature is not available in all countries.
Teletext is a free service broadcast by most TV
stations which gives up-to-theminute information
on news, weather, television programmes, share
prices and many other topics.
If the TV is in SIMPLE text or FASTEXT mode,
The teletext decoder of this TV can support
the SIMPLE and FASTEXT systems. SIMPLE
(standard teletext) consists of a number of
pages which are selected by directly entering
the corresponding page number. FASTEXT are
more modern methods allowing quick and easy
selection of teletext information.
Switch On/Off
Press the TEXT button to switch to teletext. The
initial page or last page viewed appears on the
screen.
Two page numbers, TV station name, date and
time are displayed on the screen headline. The
first page number indicates your selection, while
the second shows the current page displayed.
Press the TEXT button to switch off teletext. The
previous mode reappears.
LIST mode
press the ꔻ button to switch to LIST mode.
Four teletext page numbers of your choice can
be colour coded and easily selected by pressing
the corresponding coloured button on the remote
control handset.
1 Press a coloured button.
2 Using the Number buttons, select the page you
wish to programme.
3 Press the OK button. The selected page is
stored as the selected page number, blinking
once to confirm this. From now on, you can
select this page with the same coloured button.
4 The three other coloured buttons are
programmed in this way.
Fastext
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the
corresponding coloured button.
Page selection
1 Press the ꔻ button to select the index page.
Simple Text
Page selection
1 Enter the desired page number as a three digit
number with the NUMBER buttons. If during
selection you press a wrong number, you must
complete the three digit number and then reenter the correct page number.
2 The P + - button can be used to select the
preceding or following page.
2 You can select the pages which are colour
coded along the bottom line with corresponding
coloured buttons.
3 AS with SIMPLE teletext mode, you can select
a page by entering its three digit page number
with the Number buttons in FASTEXT mode.
4 The P + - button can be used to select the
preceding or following page.
TELETEXT
ꔻ Index
Select the each index page.
ꔾ Time
When viewing a TV programme, select this
menu to display the time at the top right hand
corner of the screen.
In the teletext mode, press this button to select
a sub page number. The sub page number is
displayed at the bottom of the screen. To hold
or change the sub page, press the Red/Green,
∧∨ or NUMBER buttons.
ꕀ Hold
Stops the automatic page change which will
occur if a teletext page consists of 2 or more
sub pages.
The number of sub pages and the sub page
displayed is, usually, shown on the screen
below the time. When this menu is selected the
stop symbol is displayed at the top left-hand
corner of the screen and the automatic page
change is inactive.
ꔽ Reveal
Select this menu to display concealed
information, such as solutions to riddles or
puzzles.
ꔼ Update
Displays the TV picture on the screen while
waiting for a new teletext page. The display will
appear at the top left hand corner of the screen.
When the updated page is available then
display will change to the page number. Select
this menu again to view the updated teletext
page.
ENGLISH
ENG
Special Teletext Function
47
48 MAINTENANCE / TROUBLESHOOTING
ENGLISH
ENG
MAINTENANCE
Cleaning your TV
Clean your TV regularly to keep the best performance and to extend the product lifespan.
CAUTION
yy Make sure to turn the power off and disconnect the power cord and all other cables first.
yy When the TV is left unattended and unused for a long time, disconnect the power cord from the wall
outlet to prevent possible damage from lightning or power surges.
Screen, frame, cabinet and stand
yy To remove dust or light dirt, wipe the surface with a dry, clean, and soft cloth.
yy To remove major dirt, wipe the surface with a soft cloth dampened in clean water or a diluted mild
detergent. Then wipe immediately with a dry cloth.
CAUTION
yy Avoid touching the screen at all times, as this may result in damage to the screen.
yy Do not push, rub, or hit the screen surface with your fingernail or a sharp object, as this may result in
scratches and image distortions.
yy Do not use any chemicals as this may damage the product.
yy Do not spray liquid onto the surface. If water enters the TV, it may result in fire, electric shock, or
malfunction.
Power cord
yy Remove the accumulated dust or dirt on the power cord regularly.
TROUBLESHOOTING
Problem
Solution
Cannot control the
TV with the remote
control.
yy Check the remote control sensor on the product and try again.
yy Check if there is any obstacle between the product and the remote control.
to , to ).
yy Check if the batteries are still working and properly installed (
No image display
and no sound is
produced.
yy Check if the product is turned on.
yy Check if the power cord is connected to a wall outlet.
yy Check if there is a problem in the wall outlet by connecting other products.
The TV turns off
suddenly.
yy Check the power control settings. The power supply may be interrupted.
yy Check if the Auto sleep feature is activated in the Time settings.
yy If there is no signal while the TV is on, the TV will turn off automatically after
15 minutes of inactivity.
TROUBLESHOOTING
49
Problem
No sound is produced while
images are displaying.
One of the speakers produce
noises or does not produce
sound.
Solution
Press
+ or - button.
yy
Check if the sound is muted by pressing MUTE.
yy
Scroll to other channels. There may a problem with the broadcast.
yy
Check if the audio cables are connected properly.
yy
A change in ambient humidity or temperature may result in an unusual
yy
noise when the product turns on or off.
There is no problem with your product.
yy
Video
Problem
Solution
An image displays in black
Adjust the colour setting in the PICTURE menu.
yy
and white or the colour quality yy
Keep a sufficient distance between this product and other electronic
is poor.
products.
Scroll to other channels. There may a problem with the broadcast.
yy
Check if there are local interferences such as an electrical appliance
Horizontal or vertical bars
yy
appears or images blur
or power tool.
Lines or streaks appear on
Check the antenna or aim the antenna to the proper direction.
yy
images
Afterimages (ghosts) appear
Pixels may have been damaged from a fixed image displayed for
yy
when the product turns off
a long time (image burn). Use a screen saver to prevent the pixel
damage on the screen.
The power is on but the screen yy
Adjust the brightness and contrast in the PICTURE menu.
appears extremely dark.
“No Signal” appears on the
Check if the signal cable is connected between the TV and products
yy
screen.
properly.
Check the selected input source by pressing INPUT.
yy
The display offset is wrong.
Adjust the position setting in the PICTURE menu.
yy
Check if the video card resolution and frequency are supported by
yy
the product. If the frequency is out of range, set to the recommended
resolution using the display settings on the external device.
Thin lines appear in the
Check the video cable connections.
yy
background of the screen.
Horizontal noises appear or
Adjust the Phase setting in the PICTURE menu.
yy
characters blur.
The reception on some
Scroll to other channels. There may a problem with the broadcast.
yy
channels is poor
The station signal may be weak. Aim the antenna to the proper
yy
direction.
Check if there is local interference such as an electrical appliance or
yy
power tool.
ENGLISH
ENG
Audio
50 SPECIFICATIONS
ENGLISH
ENG
SPECIFICATIONS
Product specifications may be changed without prior notice due to upgrade of product functions.
For the power supply and power consumption, refer to the label attached to the product.
MODELS
19LS33**
22LS33**
26LS33**
19LS3300-TA
19LS330Y-TA
451.0 x 334.0 x 140.0
22LS3300-TA
22LS330Y-TA
523.0 x 376.0 x 140.0
26LS3300-TA
26LS330Y-TA
627.0 x 442.0 x 162.0
523.0 x 339.0 x 31.6
627.0 x 402.0 x 30.1
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 451.0 x 296.0 x 31.5
Weight
With stand (kg)
2.8
3.5
5.0
Without stand (kg)
2.6
3.2
4.7
DC 19V, 1.1A
DC 24V, 1.4A
DC 24V, 1.8A
32LS33**
22CS41**
22CS410-TB
22CS410Y-TB
22CS411-TA
22CS411Y-TA
22CS412-TD
539.0 x 400.0 x 165.0
26CS41**
26CS410-TB
26CS410Y-TB
26CS411-TA
26CS411Y-TA
26CS412-TD
663.0 x 483.0 x 197.0
539.0 x 345.0 x 56.8
663.0 x 424.0 x 72.8
4.2
7.4
3.9
6.6
Power requirement
MODELS
32LS3300-TA
32LS330Y-TA
755.0 x 530.0 x 239.0
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 755.0 x 479.0 x 45.8
8.5
Weight
With stand (kg)
Without stand (kg)
Power requirement
7.7
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
32CS41**
42CS41**
32LS310*
32CS410-TB
32CS410Y-TB
32CS411-TA
32CS411Y-TA
32CS412-TD
42CS410-TB
42CS410Y-TB
42CS411-TA
42CS411Y-TA
42CS412-TD
32LS3100-TA
32LS310Y-TA
Dimensions With stand (mm)
(W x H x D) Without stand(mm)
794.0 x 565.0 x 207.0
1017.0 x 695.0 x 261.0
795.0 x 566.0 x 207.0
794.0 x 504.0 x 73.5
1017.0 x 629.0 x 76.5
795.0 x 504.0 x 73.5
Weight
With stand (kg)
9.0
15.1
9.1
Without stand (kg)
8.0
13.5
8.1
MODELS
Power requirement
AC 100-240 V~ 50 / 60 Hz AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
MODELS
42LS310*
42LS3100-TA
42LS310Y-TA
42LS311*
42LS3110-TB
42LS311Y-TB
1018.0 x 696.0 x 261.0
32LS311*
32LS3110-TB
32LS311Y-TB
795.0 x 566.0 x 207.0
1018.0 x 629.0 x 76.5
795.0 x 504.0 x 73.5
1018.0 x 629.0 x 76.5
14.7
9.1
14.7
13.1
8.1
13.1
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Dimensions With stand (mm)
(W x H x D) Without stand(mm)
Weight
With stand (kg)
Without stand (kg)
Power requirement
1018.0 x 696.0 x 261.0
SPECIFICATIONS
738.0 x 501.0 x 185.0
Dimensions With stand (mm)
(W x H x D) Without stand(mm) 738.0 x 438.0 x 86.0
Weight
42LS315*
42LS3150-TA
42LS315Y-TA
32LS30**
972.0 x 635.0 x 212.0
846.0 x 519.0 x 227.5
972.0 x 571.0 x 86.0
846.0 x 459.0 x 77.9
32LS3000-TA
With stand (kg)
7.5
11.8
8.5
Without stand (kg)
6.9
10.7
7.3
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
AC 100-240 V~ 50 / 60 Hz
Power requirement
ENGLISH
ENG
32LS315*
32LS3150-TA
32LS315Y-TA
MODELS
51
52 SPECIFICATIONS
ENGLISH
ENG
Environment
condition
Operating Temperature
0 °C to 40 °C
Operating Humidity
Less than 80 %
Storage Temperature
-20 °C to 60 °C
Storage Humidity
Less than 85 %
Analogue TV
New Zealand,
Singapore
Television System
Programme Coverage
Australia
Indonesia, Israel,
Myanmar, Sri Lanka
South Africa
Vietnam, Malaysia
Iran, Algeria, Tunisia,
Digital model
Analogue model,
India, Thailand, --
Television System
PAL/SECAM-B/G/D/K, PAL-I
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
PAL B/B
Programme Coverage
B/B : VHF/UHF 0 to 75, CATV : 2 to 44
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
Television System
PAL/SECAM-B/G/D/K, PAL-I, NTSC-M
Programme Coverage
BG : VHF/UHF 1 to 69, CATV 01 to 47
I : VHF/UHF 1 to 69, CATV 01 to 47
DK : VHF/UHF 1 to 69, CATV 01 to 47
M : VHF/UHF 2 to 78, CATV 01 to 71
External Antenna
Impedance
75 Ω
SPECIFICATIONS
Resolution
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
720x480
31.469
31.5
59.94
60
720x576
31.25
50
1280x720
37.5
44.96
45
50
59.94
60
1920x1080
33.72
33.75
28.125
26.97
27
33.716
33.75
56.25
67.43
67.5
59.94
60
50
23.97
24
29.976
30.00
50
59.94
60
Component port connecting information
Component ports on the TV Y
PB
PR
Video output ports on DVD
player
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
Signal
480i/576i
480p/576p
720p/1080i
1080p
Component
O
O
O
O
(50 Hz / 60 Hz only)
ENGLISH
ENG
HDMI-DTV supported mode
53
Record the model number and serial number of
the TV.
Refer to the label on the back cover and quote
this information to your dealer when requiring any
service.
MODEL
SERIAL
(Only DTV)
Download PDF

advertising