LG | 32PC5RV | LG 32PC5RV Owner’s Manual

ENGLISH
PLASMA TV
OWNER’S MANUAL
PLASMA TV MODELS
32PC5R*
Please read this manual carefully before operating your set.
Retain it for future reference.
Record model number and serial number of the set.
Refer to the label on the back cover and quote this information.
To your dealer when requiring service.
ACCESSORIES
POWER
TV
1
2
4
5
7
8
INPUT
0
RATIO
ACCESSORIES
Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the
dealer where you purchased the TV.
3
6
9
MUTE
EXIT
MENU
OK
PR
VOL
VOL
Owner's
Manual
PR
FAV
Q.VIEW
SLEEP
TIME
PIP PR
Owner’s Manual
Batteries
LIST
I/II
HOLD
SIZE
REVEAL ? INDEX i TEXT
Owner’s manual
PIP PR
POSITION
PIP
PIP INPUT
Remote Control
4-bolts for stand assembly
2- TV Brackets
2-bolts
Refer to p. 6
2- Wall Brackets
(This feature is not available
(This
feature
is not available for all
(This feature is not availfor all models.)
models.)
able for all models.)
Holder
(Refer to p.8)
Power Cord
Cover
(Refer to p.10)
*Lightly wipe any stains or fingerprints on the surface of the TV
with the polishing cloth.
Polishing Cloth
Polishing cloth for use on the screen
This feature is not available
for all models.
Do not use excessive force. This may cause scratching or
discolouration.
1
CONTENTS
A C C E S S O R I E S .....................................................1
CONTENTS
PREPARATION
Front Panel Controls................................................. 4
Back Panel Information ............................................ 5
Stand Installation....................................................... 6
Attaching the TV to a Wall........................................7
Back Cover for Wire Arrangement......................... 8
POWER CORD ARRANGEMENT ........................... 8
Desktop Pedestal Installation ................................. 9
Wall Mount: Horizontal installation..................... 10
NOT USING THE DESK-TYPE STAND....................... 10
Antenna Connection ............................................... 11
EXTERNAL EQUIPMENT SETUP
HD Receiver Setup .......................................................12
DVD Setup..................................................................... 15
VCR Setup ..................................................................... 18
Other A/V Source Setup .......................................... 20
External Stereo ............................................................. 21
PC Setup.........................................................................22
- Screen Setup for PC Mode................................24
PICTURE CONTROL
PICTURE
CONTROL
Watching PIP(Picture-in-Picture)..........................43
Picture Size (Aspect Ratio)Control......................45
Preset Picture Settings
- Picture Mode-Preset........................................47
- Auto Colour Tone Control(Warm/Medium/Cool)48
Manual Picture Adjustment
- Picture Mode-User Option ............................49
- Colour Tone - User Option ...........................50
- Picture Improvement Technology ................51
Demo .............................................................52
Advanced - Cinema..................................................53
Advanced - Black(Darkness) Level .......................54
Picture Reset..............................................................55
Image Sticking Minimization(ISM) Method........56
Low-Power Picture Mode ........................................57
Factory reset.....................................................................58
SOUND & LANGUAGE CONTROL
WATCHING
WATCHING TV
TV//PROGRAMME
PROGRAMME CONTROL
CONTROL
Remote Control Key Functions ..................................28
Turning on the TV....................................................... 30
Programme Selection.................................................. 31
Volume Adjustment ......................................................31
On Screen Menus Selection and Adjustment.......32
Auto Programme Tuning............................................ 33
Manual Programme Tuning ....................................... 34
Fine Tuning .....................................................................35
Assigning a Station Name..........................................36
Programme Edit ........................................................... 37
Favourite Programme .................................................. 38
Selecting the Programme Table............................... 39
Key lock.......................................................................... 40
.................................................................. 41
2
Auto Volume Leveler ....................................................59
Preset Sound Settings - Sound Mode....................60
Sound Setting Adjustment - User Mode ...............61
Balance ............................................................................62
TV Speakers On/Off Setup .......................................63
I/II
- Stereo/Dual Reception.......................................64
- NICAM Reception ................................................65
- Speaker Sound Output Selection....................65
On-Screen Menu Language Selection ...................... 66
TIME SETTING
CONTENTS
Clock Setup....................................................................67
Auto On/Off Timer Setting .......................................68
Sleep Timer Setting......................................................69
Auto Shut-off Setting...................................................70
TELETEXT
Switch On/Off ..............................................................71
SIMPLE Text....................................................................71
TOP Text .........................................................................72
FASTEXT .........................................................................72
Special Teletext Functions..........................................73
APPENDIX
Troubleshooting ............................................................74
Maintenance .................................................................76
Product Specifications ................................................77
3
PREPARATION
FRONT PANEL CONTROLS
■
■
This is a simplified representation of the front panel. Image shown may differ from your TV.
If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
PREPARATION
Remote Control
Sensor
Power/Standby Indicator
• illuminates red in standby mode.
• illuminates green when the TV is switched on.
INPUT
INPUT
INPUT
MENU
MENU
MENU
VOL
OK
PR
PR
VOL
OK
PR
VOL
OK
INPUT
OK
POWER
MENU
4
PROGRAMME
VOLUME
BACK PANEL INFORMATION
■
This is a simplified representation of the back panel. Image shown may differ from your TV.
PREPARATION
AUDIO
1
COMPONENT IN
AUDIO
2
COMPONENT
IN
AUDIO
VIDEO
1
1
2
AUDIO IN
(RGB/DVI)
VARIABLE
ARIABLE
OUT
VARIABLE
OUT
VIDEO
1
VARIABLE
OUT
3
RGB IN (PC)
AV OUT
AUDIO IN
(RGB/DVI)
AUDIO IN
(RGB/DVI)
AV OUT
AV OUT
2
HDMI/DVI IN
HDMI IN
2
2
2 IN
HDMI
HDMI/DVI IN
HDMI IN
RGB IN (PC)
COMPONENT IN
VIDEO
AUDIO
RS-232C IN
(CONTROL & SERVICE)
5
AUDIO IN
(RGB/DVI)
AV OUT
6
1
2
1
9
2
COMPONENT
ININ
HDMI/DVI
COMPONENT AUDIO
IN
VIDEO
1
AUDIO
VIDEO
AV IN
RS-232C IN
(CONTROL & SERVICE)
RS-232C IN
(CONTROL & SER
SERVICE)
VICE)
HDMI IN
AUDIO IN
(RGB/DVI)
AUDIO IN
(RGB/DVI)
AV OUT
RGB IN (PC)
1
2
1
HDMI/DVI
IN
2 IN
HDMI
HDMI/DVI IN
HDMI IN
5
7
4
ANTENNAAV IN
AV OUT
IN
1
2
2
ANTENNA
IN
ANTENNA
IN
3
RGB IN (PC)
1
AV IN
R AUDIO L/MONO VIDEO
1
AV IN
ANTENNA
IN
RGB IN (PC)
1
HDMI/DVI
IN
4
AV IN
R AUDIO L/MONO VIDEO
COMPONENT IN
VIDEO
8
R AUDIO
L/MONOL/MONO
VIDEOVIDEO
R AUDIO
2
RGB IN (PC)
R AUDIO
L/MONOL/MONO
VIDEOVIDEO
R AUDIO
1
AV IN
ANTENNA
IN
ANTENNA
IN
6
7
1
Component Input
Connect a component video/audio device to
these jacks.
6
RGB/Audio Input
Connect the monitor output from a PC to the
appropriate input port.
2
Variable Output
Connect an external amplifier or add a subwoofer
to your surround sound system.
(This feature is not available for all models.)
7
Antenna Input
Connect RF antenna (UHF) to this jack.
8
Power Cord Socket
This TV operates on an AC power. The voltage is
indicated on the Specifications page. Never
attempt to operate the TV on DC power.
9
RS-232C Input (CONTROL&SERVICE) Port
Connect the serial port of the control devices to
the RS-232C jack.
(This feature is not available for all models.)
3
AV Output
Connect second TV or monitor to the AV OUT
socket on the TV.
4
Audio/Video Input (AV IN)
Connect audio/video output from an external
device to these jacks.
5
HDMI Input
Connect a HDMI signal to HDMI IN.
Or DVI(VIDEO)signal to HDMI/DVI port with DVI
to HDMI cable.
5
PREPARATION
STAND INSTALLATION
Carefully place the TV screen side down on a
cushioned surface to protect the screen from
damage.
2
Assemble the TV as shown.
3
Fix the 4 bolts securely using the holes in the
back of the TV.
PREPARATION
1
6
ATTACHING THE TV TO A WALL
(This feature is not available for all models.)
■
■
1
2
1
Use the eye-bolts or TV brackets/bolts to fix the TV to the wall as shown in the picture.
(If your TV has bolts in the eyebolts, loosen then bolts.)
* Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.
2
Secure the wall brackets with bolts (must purchase seperately) to the wall.
Ensure that both brackets are even.
PREPARATION
Position the TV close to the wall to avoid the possibility of it falling when pushed.
The instructions shown below are a safer way to set up the TV, which is to fix it to the wall, avoiding the
possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury.
This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.
3
3
Use a strong cord (must purchase separately) to secure the TV.
Secure the cord in such a way that it becomes taught when the TV is in position.
! NOTE
G
G
G
When moving the TV undo the cords first.
Use a platform or cabinet string and large enough to support the size and weight of the TV.
To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.
7
PREPARATION
BACK COVER FOR WIRE ARRANGEMENT
Arrange the cables as shown picture.
PREPARATION
POWER CORD ARRANGEMENT
After connecting the power cord to the AC input
terminal, remove the bolt at the hole on the back
cover and fix the power cord at the rear side of the
TV by using the bracket for fixing the power cord.
8
■
■
The TV can be installed in various ways such as on a wall, or on a desktop etc.
The TV is designed to be mounted horizontally.
Power Supply
PREPARATION
Circuit breaker
EARTHING
Ensure that you connect the earth wire to prevent possible electric shock. If grounding methods are not
possible, have a qualified electrician install a separate circuit breaker.
Do not try to earth the TV by connecting it to telephone wires, lightening rods or gas pipes.
DESKTOP PEDESTAL INSTALLATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV .
4 inches
4 inches
4 inches
4 inches
9
PREPARATION
WALL MOUNT: HORIZONTAL INSTALLATION
PREPARATION
For adequate ventilation allow a clearance of 4” (10cm) all around the TV. We recommend that you use a
wall mounting bracket of LG brand when mounting the TV to a wall.
4 inches
4 inches
4 inches
4 inches
4 inches
NOT USING THE DESK-TYPE STAND
When installing the wall-mounted unit, use the protection
cover for desk-type stand installation.
10
It is recommended that 32PC5RVH model only be used at an altitude of less than 6561 feet (2000m) to get
the best quality picture and sound.
■ To prevent damage do not connect to the mains outlet until all connections are made between the devices.
■
ANTENNA CONNECTION
For optimum picture quality, adjust antenna direction.
■ An antenna cable and converter are not supplied.
■
AV OUT
1
2
RGB IN (PC)
Multi-family Dwellings/Apartments
2
(Connect1 to wall antenna
socket)
COMPONENT IN
VIDEO
VARIABLE
OUT
HDMI IN
2
COMPONENT IN
VIDEO
ANTENNA
IN
AUDIO
RS-232C IN
(CONTROL & SERVICE)
RGB IN (PC)
1
HDMI/DVI IN
RF Coaxial Wire (75 ohm)
AUDIO
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
AV OUT
AV OUT
12
2
RGB IN (PC)
2
RGB IN (PC)
HDMI/DVI IN
1
HDMI/DVI IN
UHF
Antenna
HDMI IN
2
HDMI IN
AUDIO IN
(RGB/DVI)
AV OUT
AV IN
ANTENNA
IN
AV IN
L/MONO VIDEO
R AUDIO
R AUDIO L/MONO VIDEO
COMPONENT IN
COMPONENT
IN
Single-family
Dwellings
/HousesVARIABLE
AUDIO IN
1
AUDIO
(ConnectVIDEO
to wall jack
for outdoorOUT
antenna) (RGB/DVI)
1
AV IN
ANTENNA
IN
1
VIDEO
AV OUT
HDMI IN
2
Outdoor
Antenna
AUDIO IN
(RGB/DVI)
RGB IN (PC)
1
HDMI/DVI IN
HDMI/DVI IN
AUDIO
1
2
R AUDIO L/MONO VIDEO
Wall
Antenna
Socket
AV IN
R AUDIO L/MONO VIDEO
AUDIO IN
(RGB/DVI)
R AUDIO L/MONO VIDEO
VARIABLE
OUT
AUDIO
PREPARATION
COMPONENT IN
VIDEO
AV IN
ANTENNA
IN
2
HDMI IN
ANTENNA
IN
Signal
Amplifier
VHF
■
■
AUDIO
RS-232C IN
(CONTROL & SERVICE)
AUDIO IN
(RGB/DVI)
AV OUT
AV IN
R AUDIO L/MONO VIDEO
COMPONENT IN
VIDEO
1
In poor signal areas, to achieve
better picture quality it may be necessary to install a signal amplifier to the
antenna as shown above. 2
If signal needs to be split for two TVs, use an antenna
signal splitter for connection.
RGB IN (PC)
1
HDMI/DVI IN
2
HDMI IN
ANTENNA
IN
11
EXTERNAL EQUIPMENT SETUP
■
To avoid damaging any equipment, never plug in any power cords until you have finished connecting all equipment.
HD RECEIVER SETUP
Connecting with a component cable
1
Connect the video outputs (Y, PB, PR) of the digital set
top box to the C O M P O N E N T I N V I D E O jacks on the
TV.
COMPONENT IN
VIDEO
AUDIO
VARIABLE
OUT
1
EXTERNAL EQUIPMENT SETUP
2
2
RGB IN (PC)
Connect the audio output of the digital set-top box to
the C O M P O N E N T I N A U D I O jacks on the TV.
1
2
HDMI/DVI IN
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
4
Select Component1 input source using the I N P U T
button on the remote control.
If connected to C O M P O N E N T I N 2, select
Component2 input source.
Signal
Component
HDMI1/2
480i/576i
Yes
No
480p/576p
Yes
Yes
720p/1080i
Yes
Yes
HDMI IN
1
2
COMPONENT IN
VIDEO
AUDIO
VARIABLE
OUT
1
2
RGB IN (PC)
1
HDMI/DVI IN
12
2
HDMI IN
COMPONENT IN
VIDEO
AUDIO
VARIABLE
OUT
1
Connecting a set-top box with an HDMI cable
2
RGB IN (PC)
1
Connect the HDMI output of the digital set-top box to
the H D M I / D V I I N 1 or H D M I I N 2 jack on the TV.
Select HDMI1 or HDMI2 input source using the
I N P U T button on the remote control.
3
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
HDMI/DVI IN
2
HDMI IN
1
EXTERNAL EQUIPMENT SETUP
2
1
! NOTE
TV can receive the video and audio signal simultaneously with using a HDMI cable.
G If the digital set-top box supports Auto HDMI function, the output resolution of the source device will
be automatically set to 1280x720p.
G If the digital set-top box player does not support Auto HDMI, you need to set the output resolution
appropriately.
To get the best picture quality, adjust the output resolution of the source device to 1280x720p.
G
13
Connecting with a HDMI to DVI cable
ANTENNA
IN
COMPONENT IN
AUDIO
VIDEO
VARIABLE
OUT
AUDIO IN
(RGB/DVI)
AV
V OUT
AV IN
1
2
RGB IN (PC)
1
EXTERNAL EQUIPMENT SETUP
T
AV IN
L/MONO
T
EXTERNAL EQUIPMENT SETUP
2
HDMI/DVI IN
HDMI IN
ANTENNA
IN
2
1
AV IN
ANTENNA
IN
14
1
Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the TV.
2
Connect the audio output of the digital set-top box to the A U D I O I N ( R G B / D V I ) jack on the TV.
3
Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
4
Select HDMI1 input source using the I N P U T button on the remote control.
DVD SETUP
Connecting with a component cable
1
Connect the video outputs (Y, PB, PR) of the DVD to the
C O M P O N E N T I N V I D E O jacks on the TV.
COMPONENT IN
VIDEO
AUDIO
VARIABLE
OUT
1
Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the TV.
2
RGB IN (PC)
RG
1
2
HDMI/DVI IN
3
Turn on the DVD player, insert a DVD.
4
Select Component1 input source using the I N P U T button
on the remote control.
If connected to C O M P O N E N T I N 2, select Component2
input source.
5
Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP
2
HDMI IN
1
Component Input ports
2
COMPONENT IN
To achieve better picture quality, connect a DVD player to the component input portsVIDEO
as shown below.
AUDIO
VARIABLE
OUT
1
Component ports on the TV
Y
PB
PR
Y
PB
PR
Y
B-Y
R-Y
Y
Cb
Cr
Y
Pb
Pr
2
Video output ports
on DVD player
RGB IN (PC)
1
2
HDMI/DVI IN
HDMI IN
15
EXTERNAL EQUIPMENT SETUP
Connecting with a RCA cable
S-VIDEO
EXTERNAL EQUIPMENT SETUP
16
2
COMPONENT IN
3
AUDIO
VARIABLE
OUT
AUDIO IN
(RGB/DVI)
Select AV input source using the I N P U T button on the
remote control.
2
RGB IN (PC)
1
HDMI/DVI IN
2
HDMI IN
AV OUTT
AV IN
ANTENNA
IN
R
ANT IN
ANT OUT
Insert a DVD into the DVD player and press PLAY on the
DVD player. (Refer to the DVD player owner’s manual.)
VIDEO
1
L
VIDEO
OUTPUT
SWITCH
L/MONO
MONO VIDEO
R AUDIO L/
1
V I D E O jacks between TV and DVD
Connect the A U D I O/V
player. Match the jack colours (Video = yellow, Audio Left =
white, and Audio Right = red)
1
Connecting the HDMI cable
COMPONENT IN
VIDEO
AUDIO
VARIABLE
OUT
1
1
Connect the HDMI output of the DVD to the
H D M I / D V I I N 1 or H D M I I N 2 jack on the TV.
2
RGB IN (PC)
Select HDMI1 or HDMI2 input source using the
I N P U T button on the remote control.
3
Refer to the DVD player's manual for operating
instructions.
2
HDMI/DVI IN
HDMI IN
EXTERNAL EQUIPMENT SETUP
2
1
1
! NOTE
The TV can receive video and audio signals simultaneously when
using a HDMI cable.
G If the DVD player supports Auto HDMI function, the output resolution of the source device will be automatically set to 1280x720p.
G If the DVD player does not support Auto HDMI, you must TV the
output resolution appropriately.
To get the best picture quality, adjust the output resolution of the
source device to 1280x720p.
G
Supported Display Resolution (HDMI-DTV mode)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x480p
31.47
31.50
59.94
60.00
720x576p
31.25
50.00
1280x720p
44.96
45.00
37.50
59.94
60.00
50.00
1920x1080i
33.72
33.75
28.125
59.94
60.00
50.00
17
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To avoid picture noise (interference), allow adequate distance between the VCR and TV.
AUDIO
IN
■ Typically
a frozen still picture from a VCR. If 4:3 picture format is used for an extended period the fixed
AV OUT
AV IN
(RGB/DVI)
images on the sides of the screen may remain visible.
■
RIABLE
OUT
Connecting with a RF cable
B IN (PC)
EXTERNAL EQUIPMENT SETUP
ANTENNA
IN
ANT OUT
S-VIDEO
ANT IN
OUTPUT
SWITCH
VIDEO
L
R
1
Wall Jack
2
Antenna
1
Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the TV.
2
Connect the antenna cable to the A N T I N socket of the VCR.
3
Press the P L A Y button on the VCR and match the appropriate programme between the TV and VCR for
viewing.
COMPONENT IN
VIDEO
AUDIO
VARIABLE
OUT
1
2
RGB IN (PC)
1
HDMI/DVI IN
18
2
HDMI IN
AUDIO
(RGB/D
Connecting with a RCA cable
S-VIDEO
ANT IN
ANT OUT
1
AUDIO
DIO
RGB IN (PC)
2
HDMII IN
AUDIO IN
(RGB/DVI)
AV
V OUT
AV IN
L/MONO
MONO VIDEO
R AUDIO L/
VARIABLE
OUT
ANTENNA
IN
1
V I D E O jacks between TV and VCR. Match the jack colours (Video = yellow,
Connect the A U D I O/V
Audio Left = white, and Audio Right = red)
2
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.)
3
Select AV input source using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT SETUP
N
R
OUTPUT
SWITCH
OMPONENT IN
EO
L
VIDEO
! NOTE
G
If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack
of the TV.
19
Camcorder
Video Game Set
AUDIO IN
(RGB/DVI)
20
VIDEO
AV
V OUT
L
R
AV
V IN
L/MONO
MONO VIDEO
R AUDIO L/
(PC)
OTHER A/V SOURCE SETUP
EXTERNAL EQUIPMENT SETUP
BLE
T
EXTERNAL EQUIPMENT SETUP
1
ANTENNA
IN
1
V I D E O jacks between TV and external equipment. Match the jack colours.
Connect the A U D I O/V
(Video = yellow, Audio Left = white, and Audio Right = red)
2
Select AV input source using the I N P U T button on the remote control.
3
Operate the corresponding external equipment.
Refer to external equipment operating guide.
EXTERNAL STEREO
(This feature is not available for all models.)
Use to connected either an external amplifier, or add a subwoofer to your surround sound system.
COMPONENT IN
VIDEO
1
AUDIO
DIO
VARIABLE
OUT
AUDIO IN
(RGB/DVI)
AV OUT
AV IN
1
Connect the input jack of the stereo amplifier
to the
V A R I A B L E O U T jacks on the TV.
2
2
RGB IN (PC)
2
HDMI IN
1
! NOTE
G
When connecting with external audio equipments, such as
amplifiers or speakers, please turn the TV speakers off.
(G p . 6 3)
EXTERNAL EQUIPMENT SETUP
Set up your speakers through your analog stereo
1 with
amplifier, according to the instructions provided
the amplifier.
HDMI/DVI IN
ANTEN
IN
21
EXTERNAL EQUIPMENT SETUP
PC SETUP
This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings.
Connecting with a D-sub 15 pin cable
COMPONENT IN
VIDEO
AUDIO
VARIABLE
OUT
AUDIO IN
(RGB/DVI)
AV OUT
AV
V IN
EXTERNAL EQUIPMENT SETUP
22
L/MONO
1
2
RGB IN (PC)
1
HDMI/DVI IN
2
HDMI IN
ANTENNA
IN
1
2
RGB OUTPUT
AUDIO
1
Connect the RGB output of the PC to the R G B I N ( P C) jack on the TV.
2
Connect the PC audio output to the A U D I O I N ( R G B / D V I ) jack on the TV.
3
Turn on the PC and the TV.
4
Select RGB PC input source using the I N P U T button on the remote control.
! NOTE
Horizontal and Vertical frequencies are separate.
G We recommend using 852x480, 60Hz (32 inch
VGA PLASMA TV models) for the PC mode,
these should provide the best picture quality.
G If the resolution of PC is over XGA, there will be
no picture on the TV.
G Connect the audio cable from the PC to the
Audio input on the TV.(Audio cables are not
included with the TV).
G If you use too long an RGB-PC cable, there may
be interference on the screen. We recommend
using under 5m of the cable. This provides the
best picture quality.
G The TV does not support DVI-PC mode.
Supported Display Resolution (RGB-PC mode)
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
640x350
31.468
70.09
720x400
31.469
70.08
640x480
31.469
59.94
848x480
31.5
60.0
852x480
31.5
60.0
800x600
37.879
60.31
1024x768
48.363
60.0
EXTERNAL EQUIPMENT SETUP
To enjoy vivid picture and sound, connect the PC
to the TV.
G Avoid keeping a fixed image on the TV ’s screen
for prolonged periods of time.The fixed image
may become permanently imprinted on the
screen;use a screen saver when possible.
Connect
the PC to the RGB (PC) port of the TV;
G
change the resolution output of PC accordingly.
There
may be interference relating to resolution,
G
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution or change the refresh rate to another rate
or adjust the brightness and contrast on the
menu until the picture is clear. If the refresh rate
of the PC graphic card can not be changed,
change the PC graphic card or consult the manufacturer of the PC graphic card.
G The synchronization input waveform for
G
! NOTE
G
It’s supported to 848x480, 852x480 in VGA
modes. (VGA Models)
23
EXTERNAL EQUIPMENT SETUP
Screen Setup for PC mode
Auto Configure (RGB [PC] mode only)
Automatically adjusts picture position and minimizes image
instability. After adjustment, if the image is still not correct, your
TV is functioning properly but needs further adjustment.
POWER
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
EXIT
MENU
Auto configure
EXTERNAL EQUIPMENT SETUP
This function is for automatic adjustment of the screen position,
clock, and phase. The displayed image will be unstable for a few
seconds while the auto configuration is in progress.
RATIO
OK
PR
VOL
VOL
PR
Picture
1
Press the M E N U button and then use D /
select the Picture menu.
2
Press the G button and then use D /
Screen.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
button to
button to select
DE F G
OK MENU
1
3
Press the G button and then use D /
Auto Config..
4
Press the G button to start Auto Config..
E
button to select
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
To Set
XD Demo
• When Auto config. has finished, OK will be shown on
screen.
• If the position of the image is still not correct, try Auto
adjustment again.
DE F G
OK MENU
2
Screen
Config.
Auto config.
Manual Config.
VGA Mode
Reset
G
To Set
• If picture needs to be adjusted again after Auto adjustment in RGB (PC), you can adjust the Manual Config..
DE F G
5
24
Press the E X I T button to return to TV viewing.
OK MENU
3 4
Adjustment for screen Phase, Clock, Position
If the picture is not clear after auto adjustment and especially if characters are still trembling, adjust the picture
phase manually.
POWER
To correct the screen size, adjust C l o c k.
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
It’s not available to use Phase, Clock function in COMPONENT (480i/480p/576i/576p/720p/1080i), HDMI
(480p/576p/720p/1080i).
EXTERNAL EQUIPMENT SETUP
This function works in the following mode : RGB[PC], COMPONENT (480i/480p/576i/576p/720p/1080i), HDMI
(480p/576p/720p/1080i).
TV
OK
PR
VOL
VOL
PR
C l o c k This function is to minimize any vertical bars or
stripes visible on the screen background the horizontal screen size will also change.
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
P h a s e This function allows you to remove any horizontal
noise and clear or sharpen the image of characters.
DE F G
1
2
Press the M E N U button and then use D /
select the Picture menu.
Press the G button and then use D /
Screen.
E
E
OK MENU
button to
button to select
1
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
To Set
XD Demo
3
Press the G button and then use D /
Manual Config..
E
button to select
DE F G
OK MENU
2
4
Press the G button and then use D / E button to select
Phase, Clock, H-Position or V-Position.
5
Press the F /
6
Press the E X I T button to return to TV viewing.
G
Screen
Auto Config.
Manual Config.
VGA Mode
Reset
G
Phase
Clock
H-Position
V-Position
50
0
0
0
button to make appropriate adjustments.
DE F G
OK MENU
3 4 5
25
EXTERNAL EQUIPMENT SETUP
Selecting Wide VGA mode
POWER
To view a normal picture, match the resolution of RGB mode
and selection of VGA mode.
This function works in the following mode: RGB[PC] mode.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
EXTERNAL EQUIPMENT SETUP
PR
VOL
VOL
PR
Picture
1
Press the M E N U button and then use D /
select the Picture menu.
2
Press the G button and then use D /
Screen.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
button to
button to select
DE F G
OK MENU
1
3
Press the G button and then use D /
VGA Mode.
E
4
Press the G button and then use D /
the desired VGA resolution.
E
button to select
button to select
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
DE F G
5
G
To Set
XD Demo
OK MENU
2
Press the E X I T button to return to TV viewing.
Screen
Auto Config.
Manual Config.
VGA Mode
Reset
DE F G
G
640x480
848x480
852x480
OK MENU
3 4
26
Initializing
(Reset to original factory settings)
POWER
1
This function operates in current mode.
To initialize the adjusted value
TV
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
EXTERNAL EQUIPMENT SETUP
OK
VOL
PR
VOL
PR
Picture
1
2
Press the MENU button and then use D /
select the Picture menu.
Press the G button and then use D /
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
button to
button to select
Screen.
1
3
Press the G button and then use D /
Reset.
4
Press the G button.
• You can initialize Position, PIP size, PIP position.
E
button to select
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
G
To Set
XD Demo
DE F G
OK MENU
2
5
Press the E X I T button to return to normal TV viewing.
Screen
Auto Config.
Manual Config.
VGA Mode
Reset
DE F G
G
To Set
OK MENU
3 4
27
WATCHING TV / PROGRAMME CONTROL
REMOTE CONTROL KEY FUNCTIONS
When using the remote control, aim it at the remote control sensor on the TV.
POWER Switches the TV on from standby or off to standby.
POWER
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
WATCHING TV / PROGRAMME CONTROL
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
TV Returns to the TV viewing from any mode.
Switches the TV on from standby.
0~9 number Selects a programme.
buttons Selects numbered items in a menu.
Switches the TV on from standby.
INPUT If you press the button once, the input source OSD will
appear on screen as shown. Press the D / E button and
then OK button to select the desired input source (TV,
AV1, AV2, Component, RGB PC, HDMI1, HDMI2).
Switches the TV on from standby.
MUTE Switches the sound on or off.
RATIO Selects your desired picture format.
EXIT Clears all on-screen displays and returns to TV viewing
from any menu.
MENU Selects a menu.
SIMPLINK Control the SIMPLINK compatible devices.
control buttons
FAV
Q.VIEW
SLEEP
I/II
LIST
SIZE Adjusts the sub picture size.
TIME
HOLD
SIZE
REVEAL ? INDEX i TEXT
PIP PR
PIP PR
POSITION
PIP
PIP INPUT
POSITION Moves the sub picture.
PIP Switches the sub picture PIP mode.
PIP PR +/- Selects a programme for the sub picture.
PIP INPUT Selects the input source for the sub picture in PIP picture mode.
COLOUR These buttons are used for teletext (only T E L E T E X T
Button models) or P r o g r a m m e e d i t.
28
THUMBSTICK Allows you to navigate the on-screen menus and adjust
(Up/Down/Left the system settings to your preference.
POWER
Right)
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
VOLUME Adjusts the volume.
UP/DOWN
Programme Selects a programme.
UP/DOWN
OK Accepts your selection or displays the current mode.
OK
FAV Displays the selected favourite programme.
Q.VIEW Returns to the previously viewed programme.
PR
VOL
VOL
LIST Displays the programme table.
PR
SLEEP Sets the sleep timer.
I/II Selects the sound output.
* No function
TELETEXT These buttons are used for teletext.
BUTTONS For further details, see the ‘Teletext’ section.
FAV
Q.VIEW
SLEEP
I/II
TIME
HOLD
SIZE
REVEAL ? INDEX i TEXT
PIP PR
PIP PR
LIST
Installing Batteries
WATCHING TV / PROGRAMME CONTROL
SIMPLINK See a list of AV devices connected to TV.
When you toggle this button, the Simplink menu appears
at the screen. (G p . 4 1)
POSITION
PIP
PIP INPUT
■
Open the battery compartment cover on the back and install the
batteries matching correct polarity (+with +,-with -).
■
Install two 1.5V AA batteries. Do not mix old or used batteries with
new ones.
■
Close cover.
29
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
When your TV is turned on, you will be able to use its features.
1
Firstly, connect the power cord correctly.
At this stage, the TV switches to standby mode.
■ In standby mode to turn TV on, press the
, I N P U T, P R D / E
button on the TV or press the P O W E R, T V, I N P U T, D / E,
N U M B E R( 0~9
9 ) buttons on the remote control and the TV will switch
on.
WATCHING TV / PROGRAMME CONTROL
Installation guide menu appears on TV screen when it is turned
on for the first time.
POWER
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
2
Press the D / E / F / G button and then, O K button to
select your desired language.
3
Press the F / G button and then, O K button to select your
desired location.
Installation Guide
If the OSD (On Screen Display)is displayed on the screen as figure
after turning on the TV, you can adjust the Language, Location, Auto
tuning.
PR
* H o m e : The user can adjust the picture mode to use.
Note: In order to reset the installation guide, select Factory Reset at
the Option menu. (G p . 5 8)
VOL
VOL
PR
FAV
Q.VIEW
SLEEP
I/II
TIME
HOLD
SIZE
REVEAL ? INDEX i TEXT
PIP PR
Location
* I n - S t o r e : It maintains the picture mode optimized for the shop
environment. It maintains the picture mode as ‘dynamic’
at a specific interval.
Note : It’s not available to use Low power.
30
TV
PIP PR
LIST
POSITION
PIP
PIP INPUT
PROGRAMME SELECTION
1
Press the D /
E
or N U M B E R buttons to select a programme number.
POWER
VOLUME ADJUSTMENT
Press the F /
2
If you wish to switch the sound off, press the M U T E button.
3
You can cancel the Mute function by pressing the M U T E, F /
button.
G
button to adjust the volume.
G
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
or I/II
OK
PR
VOL
VOL
PR
FAV
Q.VIEW
SLEEP
I/II
TIME
HOLD
SIZE
REVEAL ? INDEX i TEXT
PIP PR
PIP PR
LIST
POSITION
PIP
WATCHING TV / PROGRAMME CONTROL
1
TV
PIP INPUT
31
WATCHING TV / PROGRAMME CONTROL
ON SCREEN MENUS SELECTION AND ADJUSTMENT
Your TV's OSD (On Screen Display) may differ slightly from that shown in this manual.
The OSD mainly use pictures for the Plasma TV models.
1
Press the M E N U button and then D / E button to display each menu.
2
Press the G button and then D / E button to select a menu item.
3
Change the setting of an item in the sub or pull-down menu with F / G button.
You can move to a higher level menu by pressing the O K or M E N U button.
WATCHING TV / PROGRAMME CONTROL
Setup
Picture
Audio
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
Sound Mode
Auto Volume
Balance
TV Speaker
DE F G
OK MENU
Setup MENU
DE F G
OK MENU
DE F G
Audio MENU
Picture MENU
Option
Time
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
Clock
Off Time
On Time
Sleep Time
Auto Sleep
DE F G
OK MENU
Option MENU
OK MENU
DE F G
OK MENU
Time MENU
! NOTE
a. The OSD (On Screen Display) function enables you to adjust the screen status conveniently since it provides graphical presentation.
b. In this manual, the OSD (On Screen Display) may be different from your TV’s because it is just example
to help the TV operation.
c. In the teletext mode, menus are not displayed.
32
0
AUTO PROGRAMME TUNING
POWER
Up to 100 TV stations can be stored by programme numbers (0 to 99).
Once you have preset the stations, you will be able to use the D / E or
NUMBER buttons to scan the stations you have programmed.
Stations can be tuned using automatic or manual modes.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
All stations which can be received are stored by this method. It is recommended that you use Auto tuning during installation of this TV.
OK
PR
VOL
VOL
PR
1
Press the M E N U button and then D /
Setup menu.
E button to select the
Setup
Press the G button and then D /
Tuning.
E button to select Auto
3
Press the G button and then D /
E button to select System.
4
Press the D / E button to select a TV system menu;
BG: PAL B/G, SECAM B/G (Europe / East Europe / Asia /
NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK: PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines)
DE F G
5
Press the D /
E button to select Storage
1
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Press the F / G button or NUMBER buttons to select the initial programme number. If you use NUMBER buttons, any
number under 10 is entered with a numeric ‘0’ in front of it,
0 5’ for 5.
i.e.‘0
7
Press the D /
8
Press the G button to begin auto tuning.
All receivable stations are stored.
To Set
G
From.
DE F G
6
OK MENU
OK MENU
2
Auto Tuning
System
Storage From
Search
G
WATCHING TV / PROGRAMME CONTROL
2
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
BG
I
DK
M
E button to select Search.
DE F G
OK MENU
3 4 5 6 7
To stop auto tuning, press the M E N U button.
When auto tuning is complete, the Programme edit menu
appears on the screen. See the Programme edit section to edit
the stored programme.
9
Press the E X I T button to return to normal TV viewing.
Auto Tuning
C 05
BG
5
MENU
35%
Stop
8
33
WATCHING TV / PROGRAMME CONTROL
MANUAL PROGRAMME TUNING
Manual programme lets you manually tune and arrange the stations in whatever order you desire.
WATCHING TV / PROGRAMME CONTROL
34
1
Press the M E N U button and then D /
Setup menu.
2
Press the G button and then D /
Tuning.
E
POWER
button to select the
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
E
button to select Manual
PR
VOL
VOL
PR
3
Press the
4
Press the F / G button or NUMBER buttons to select the
desired programme number (0 to 99). If you use NUMBER
buttons, any number under 10 is entered with a numeric ‘0’ in
0 5’ for 5.
front of it, i.e. ‘0
5
Press the D /
6
Press the D / E button to select a TV system menu;
BG : PAL B/G, SECAM B/G (Europe / East Europe / Asia /
NewZealand / M.East / Africa / Australia)
I : PAL I/II (U.K. / Ireland / Hong Kong / South Africa)
DK : PAL D/K, SECAM D/K (East Europe / China / Africa / CIS)
M : (USA / Korea / Philippines)
G
button and then D /
E
E
button to select Storage.
Press the D /
8
Press the G button and then D /
or Cable.
9
Press the D /
10
You can select the desired programme number with the F / G
button or NUMBER buttons. If possible, select the programme
number directly with the number buttons. Any number under
0 5’ for 5.
10 is entered with a numeric ‘0’ in front of it, i.e. ‘0
E
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select System.
7
E
Setup
DE F G
OK MENU
1
Setup
Auto Tuning
Manual
Manual Tuning
Tuning
Programme Edit
Favourite Programme
G
To Set
button to select Band.
E
button to select V/UHF
button to select Channel.
DE F G
OK MENU
2
11
Press the D /
12
Press the F / G button to commence searching. If a station is
found the search will stop.
E
button to select Search.
13
Press the O K button to store it.
14
To store another station, repeat steps 3 to 1 3.
15
Press the E X I T button to return to normal TV viewing.
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
DE F G
G
99
OK MENU
3 4 5 6 7
8 9 10 11 12
FINE TUNING
Normally fine tuning is only necessary if reception is poor.
POWER
1
Press the M E N U button and then D /
the Setup menu.
E
button to select
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
2
E
button to select
Setup
3
Press the G button and then D /
E
button to select Fine.
4
Press the G button and then F /
the best picture and sound.
G
button to fine tune for
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
DE F G
OK MENU
1
Setup
5
Press the O K button to store it.
6
Press the E X I T button to return to normal TV viewing.
Auto Tuning
Manual
Manual Tuning
Tuning
Programme Edit
Favourite Programme
DE F G
G
To Set
WATCHING TV / PROGRAMME CONTROL
Press the G button and then D /
Manual Tuning.
OK MENU
2
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
DE F G
G
F /G
OK MENU
3 4 5
35
WATCHING TV / PROGRAMME CONTROL
ASSIGNING A STATION NAME
You can assign a station name up to five characters to each programme number.
POWER
TV
1
1
Press the M E N U button and then D /
the Setup menu.
E
button to select
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
2
WATCHING TV / PROGRAMME CONTROL
Press the G button and then D /
Manual Tuning.
E
PR
VOL
button to select
VOL
PR
Setup
3
Press the G button and then D /
Name.
4
Press the G button and then D / E button. You can use a
blank, + , - , the number 0 to 9 and the alphabet A to Z.
E
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
button to select
DE F G
OK MENU
1
Setup
5
Press the F / G button to select the position and make
your choice of the second character, and so on.
6
Press the O K button to store it.
Auto Tuning
Manual
Manual Tuning
Tuning
Programme Edit
Favourite Programme
DE F G
7
G
To Set
OK MENU
2
Press the E X I T button to return to normal TV viewing.
Manual Tuning
Storage
System
Band
Channel
Fine
Search
Name
DE F G
G
C 05
OK MENU
3 4 5 6
36
PROGRAMME EDIT
POWER
This function enables you to delete or skip stored programmes.
Also you can move some stations to other programme numbers
or copy a blank station data into the selected programme number.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
2
Press the G button and then D /
Programme Edit.
3
Press the G button to display the Programme edit menu.
E
E
PR
button to select
SLEEP
TIME
Deleting a programme
1.Select a programme to be deleted with the D / E / F /
button.
2.Press the RED button twice.
The selected programme is deleted, all the following
programmes are shifted up one position.
VOL
VOL
button to select
I/II
HOLD
SIZE
POSITION
REVEAL ? INDEX i TEXT
A
PIP PR
PIP
PIP PR
PIP INPUT
G
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Copying a programme
1.Select a programme to be copied with the D / E / F / G
button.
2.Press the GREEN button.
All the following programmes are shifted down one position.
A
Moving a programme
1.Select a programme to be moved with the D / E / F / G
button.
2.Press the YELLOW button.
3.Move the programme to the desired programme number with
the D / E / F / G button.
4.Press the YELLOW button again to release this function.
DE F G
OK MENU
A
Skipping a programme number
1.Select a programme number to be skipped with the D / E /
F / G button.
2.Press the BLUE button. The skipped programme turns to blue.
3.Press the BLUE button again to release the skipped programme.
When a programme number is skipped it means that you will
be unable to select it using the D / E button during normal
TV viewing. If you want to select the skipped programme,
directly enter the programme number with the NUMBER buttons or select it in the programme edit or table menu.
1
Setup
Auto Tuning
Manual Tuning
Programme
Programme Edit
Edit
Favourite Programme
G
To Set
WATCHING TV / PROGRAMME CONTROL
1
Press the M E N U button and then D /
the Setup menu.
A
4
Press the E X I T button to return to normal TV viewing.
DE F G
OK MENU
2
Programme Edit
0 C 03
1 BLN 03
2 C 12
3 S 66
4 S 67
Delete
Move
5
6
7
8
9
S
S
S
C
C
69
17
22
09
11
Copy
Skip
DE F G
OK MENU
3
37
WATCHING TV / PROGRAMME CONTROL
FAVOURITE PROGRAMME
This function lets you select your favourite programmes directly.
Repeatedly press the FAV button to select stored favourite programmes.
POWER
1
1
Press the M E N U button and then D /
Setup menu.
E
button to select the
TV
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
2
Press the G button and then D /
Favourite Programme.
E button to select
VOL
PR
VOL
PR
WATCHING TV / PROGRAMME CONTROL
Setup
3
Press the G button.
4
Press the D /
5
Select a desired programme with the F / G button or NUMBER buttons. Any number under 10 is entered with a numeric
0 5’ for 5.
‘0’in front of it, i.e.‘0
E button to select - -
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
- - - - -.
6
To store another programme, repeat steps 4 to 5.
You can store up to 8 programmes.
7
Press the E X I T button to return to normal TV viewing.
DE F G
OK MENU
1
Setup
Auto Tuning
Manual Tuning
Programme Edit
Favourite Programme
Programme
Favourite
DE F G
G
---------
---------------------------------
OK MENU
2 3 4 5
38
SELECTING THE PROGRAMME TABLE
You can check which programmes are stored in the memory by
displaying the programme table.
POWER
A
TV
1
2
3
4
5
6
7
8
9
Displaying programme table
INPUT
0
MUTE
Press the L I S T button to display the Programme table menu.
RATIO
EXIT
MENU
The programme table appears on the screen.
OK
One programme table contains ten programmes as shown.
PR
VOL
VOL
PR
a. You may find some blue programmes. They have been set up
to be skipped by auto programming or in the programme edit
mode.
b. Some programmes with the channel number shown in the
programme table indicate there is no station name assigned.
FAV
Q.VIEW
SLEEP
I/II
TIME
HOLD
SIZE
LIST
POSITION
REVEAL ? INDEX i TEXT
A
Selecting a programme in the programme table
PIP PR
PIP PR
PIP
PIP INPUT
Select a programme with the D / E / F / G button.
Then press the O K button. The TV switches to the chosen
programme number.
A
Paging through a programme table
There are 10 programme table pages in which contain 100 pro
grammes. Pressing the D / E / F / G button repeatedly turns the
pages.
Press the L I S T button to return to normal TV viewing.
Programme List
0
C 03
5
S 69
1 BLN 03
6
S 17
2
C 12
7
S 22
3
S
66
8
C 09
4
S
67
9
C 11
F G DE
WATCHING TV / PROGRAMME CONTROL
! NOTE
OK
39
WATCHING TV / PROGRAMME CONTROL
KEY LOCK
The TV can be set so that the remote control is needed to control it.
This feature can be used to prevent unauthorized viewing.
POWER
This TV is programmed to remember which option it was last
set to even if you turn the TV off.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
1
Press the M E N U button and then D /
the Option menu.
PR
VOL
E button to select
VOL
PR
WATCHING TV / PROGRAMME CONTROL
Option
2
Press the G button and then D /
Lock.
E
button to select Key
3
Press the G button and then D /
Off.
E
button to select On or
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
DE F G
OK MENU
1
Option
Press the E X I T button to return to normal TV viewing.
4
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
DE F G
G
Off
On
OK MENU
2 3
! NOTE
G
G
40
In K e y L o c k ‘O n’, if the TV is turned off, press the r / I, I N P U T, P R D / E button on the TV or
P O W E R, I N P U T, T V, D / E or NUMBER buttons on the remote control.
With the K e y L o c k O n, the display ‘Key Lock On’ appears on the screen if any button on the front
panel is pressed while viewing the TV.
This fundtion operates only with devices with the SIMPLINK
logo.
Please check the SIMPLINK logo.
POWER
This allows you to control and play other AV devices connected
to the display through HDMI cable without additional cables
and settings.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
If you do not require the SIMPLINK menu, select “Off ”.
PR
VOL
Press the M E N U button and then D /
Option menu.
E
Option
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
button to select the
DE F G
2
Press the G button and then D /
E
OK MENU
button to select SIM-
1
PLINK.
Option
3
Press the G button and then D /
Off.
4
Press the E X I T button to return to normal TV viewing.
E
button to select On or
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
DE F G
G
Off
On
WATCHING TV / PROGRAMME CONTROL
When SIMPLINK device is on the PLAY mode, F / G keys are
available to adjust the volume, but they are available for navigation on the MENU mode.
1
VOL
PR
OK MENU
2 3
41
WATCHING TV / PROGRAMME CONTROL
SIMPLINK Functions
Disc playback
Control connected AV devices by pressing the D / E / F / G, O K buttons and buttons for play, stop, pause, fast
reverse, fast forward, chapter skip.(The
button does not provide such functions)
Direct Play
After connecting AV devices to the TV, you can directly control the devices and play media without additional settings.
Select AV device
Enables you to select one of the AV devices connected to the TV and operate it.
Power off all devices
When you switch off the TV, all connected devices are turned off.
Switch audio-out
Offers an easy way to switch audio-out.
WATCHING TV / PROGRAMME CONTROL
* A device, which is connected to the TV through a HDMI cable but does not support SIMPLINK, does not
provide this function.
SIMPLINK Menu
Press the D / E /
F
/
G
button and then OK button to select the desired SIMPLINK source.
1
T V v i e w i n g : Switch to the previous TV programme
regardless of the current mode.
2
D I S C p l a y b a c k : Select and play discs. When multiple
discs are available, the titles of the discs are conveniently displayed at the bottom of the screen.
TV
3
V C R p l a y b a c k : Control the connected VCR.
4
H D D R e c o r d i n g s p l a y b a c k : Control recordings
stored in HDD.
5
Audio Out to Home theater/Audio Out to TV :
Select Home theater or TV speaker for Audio Out.
1
2
3
4
5
F
DISC
DVD HTS
Selected Device
G
When no device is connected (displayed in gray)
VCR
HDD Recorder
SPEAKER
F TV Speaker
DE OK
G
When a device is
connected (displayed in
bright colour)
! NOTE
Connect the HDMI/DVI IN or HDMI IN terminal of the TV to the rear terminal (HDMI terminal) of the
SIMPLINK device with the HDMI cable.
G After connecting the HDMI terminal for the home theatre with SIMPLINK function using the above
method, connect the VARIABLE AUDIO OUT terminal on the back of the TV to the VARIABLE AUDIO IN
terminal on the back of the SIMPLINK device with the VARIABLE AUDIO OUT cable.
G When operating an external device with SIMPLINK, press the TV button from the MODE button on the
remote control.
G When you switch the Input source using the INPUT button on the remote control, you can stop the
operation of a device controlled by SIMPLINK.
G When you select or operate a media device with home theatre function, the speaker automatically
switches to home theatre speaker (HT speaker).
G
42
PICTURE CONTROL
WATCHING PIP(PICTURE-IN-PICTURE)
PIP lets you view 2 different inputs (sources) on your TV screen at the same time.
One source will be large, and the other source will show a smaller inset image.
PIP function is available in the Component, RGB, HDMI mode. (But, it can’t adjust
480i/576i resolution of Component mode.)
POWER
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
Watching PIP/Double Window
Q.VIEW
I/II
TIME
PIP Mode
DW Mode
HOLD
SIZE
REVEAL ? INDEX i TEXT
PIP PR
PIP PR
LIST
POSITION
PIP
PIP INPUT
PICTURE CONTROL
Press the P I P button to access the sub picture.
Each press of PIP changes the PIP options.
FAV
SLEEP
PIP Off
Programme Selection for Sub Picture
Press the PIP PR +/- button to select a programme for the sub picture.
The selected programme number is displayed just below the programme number of main picture.
43
PICTURE CONTROL
Input Source Selection for Sub Picture
Press the P I P I N P U T button to select the input source for the sub picture.
Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed.
(Sub picture can be selected only TV, AV1, AV2)
Sub Picture Size Adjustment (PIP mode only)
PICTURE CONTROL
Press the S I Z E button to adjust the sub picture size.
With S I Z E button in PIP mode, sub picture is adjusted.
Moving the Sub Picture (PIP mode only)
Press the P O S I T I O N button.
Repeatedly press the P O S I T I O N button then sub picture moves.
44
PICTURE SIZE (ASPECT RATIO)CONTROL
You can watch the screen in various picture formats; S p e c t a c l e, O r i g i n a l, 4 : 3,
1 6 : 9, 1 4 : 9 and Z o o m 1 / 2.
POWER
If a fixed image is displayed on the screen for a long time, that fixed image may
become imprinted on the screen and remain visible.
You can adjust the enlarge proportion using D /
E
button.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
This function works in the following signal.
VOL
PR
VOL
PR
1
Press the RATIO button repeatedly to select the desired picture format.
You can also adjust Aspect Ratio in the Picture menu.
Spectacle
DE
• Original
When your TV receives a wide screen signal it will automatically change to the picture format to be broadcast.
Original
• 4:3
The following selection will allow you to view a picture
with an original 4:3 aspect ration, grey bars will appear
on both the left and right hand of the screen.
PICTURE CONTROL
• Spectacle
When your TV receives the wide screen signal, when
selected it will adjust the picture horizontally, in non-linear proportion, to fill the entire screen.
4:3
• 16:9
The following selection will allow you to adjust the picture horizontally, in linear proportion, to fill the entire
screen(useful for viewing 4:3 formatted DVDs).
16:9
45
PICTURE CONTROL
• 14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is magnified to
the left and right.
14:9
• Zoom2
Choose Zoom 2 when you wish the picture to
be altered, both horizontally extended and
vertically cropped. The picture adopting a
compromise between alteration and screen
converage.
DE
Zoom2
DE
PICTURE CONTROL
• Zoom1
The following selection will allow you to view
the picture without any alteration, while filling
the entire screen. However, the top and bottom of the picture will be cropped.
Zooml
DE
! NOTE
G
46
You can only select 4 : 3, 1 6 : 9 (Wide) in Component, RGB, HDMI mode only.
PRESET PICTURE SETTINGS
Picture Mode-Preset
Dynamic
Standard
Mild
User1/2
1
Select this option to display a sharp image.
The most general and natural screen display status.
Select this option to display a mild image.
Selection this option to use a user defined setting.
Press the M E N U button and then D /
the Picture menu.
E
POWER
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
button to select
OK
VOL
PR
VOL
PR
Press the G button and then D /
Picture Mode.
E
button to select
3
Press the G button and then D / E button to select
Dynamic, Standard, Mild, User1 or User2.
4
Press the E X I T button to return to normal TV viewing.
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
• Picture Mode adjusts the TV for the best picture appearance. Select the preset value in the P i c t u r e M o d e menu
based on the programme category.
• Dynamic, Standard and Mild are programmed for optimum
picture reproduction at the factory and cannot be
changed.
PICTURE CONTROL
2
OK MENU
1
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
G
Dynamic
Standard
Mild
User1
User2
OK MENU
2 3
47
PICTURE CONTROL
Auto Colour Tone Control(Warm/Medium/Cool)
To initialize values (reset to default settings), select the Cool
option.
POWER
Choose one of three automatic colour adjustments. Set to
warm to enhance hotter colours such as red, or set to cool to
see less intense colours with more blue.
This menu is activated after selecting “User1” or “User2” in the
Picture Mode.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
PICTURE CONTROL
1
Press the M E N U button and then D /
the Picture menu.
E
button to select
2
Press the G button and then D /
Colour Temperature.
3
Press the G button and then D / E button to select
either Cool, Medium, Warm or User.
E
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
button to select
DE F G
OK MENU
1
Picture
Picture Mode
Colour Temperature
4
Press the E X I T button to return to normal TV viewing.
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
G
Cool
Medium
Warm
User
OK MENU
2 3
48
MANUAL PICTURE ADJUSTMENT
Picture Mode-User Option
Contrast
Brightness
Colour
Sharpness
Tint
POWER
Adjusts the difference between light and dark
levels in the picture.
Increases or decreases the amount of white in
the picture.
Adjusts intensity of all colours.
Adjusts the level of crispness in the edges
between the light and dark areas of the picture.
The lower the level, the softer the image.
Adjusts the balance between red and green levels.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
Picture
Press the M E N U button and then D /
the Picture menu.
2
Press the G button and then D /
Picture Mode.
E
E
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
button to select
button to select
DE F G
PICTURE CONTROL
1
OK MENU
1
3
Press the G button and then D /
or User2.
4
Press the G button and then D / E button to select the
desired picture option (Contrast, Brightness, Colour,
Sharpness and Tint).
E
button to select User1
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
G
Dynamic
Standard
Mild
User1
User2
OK MENU
2 3
5
Press the F /
6
Press the E X I T button to return to normal TV viewing.
G
button to make appropriate adjustments.
User1
Contrast
Contrast
Brightness
Colour
Sharpness
Tint
100
100
50
50
50
0
Contrast
G
100
G
F
E
! NOTE
DE F G
OK MENU
4 5
G
You cannot adjust colour, sharpness and tint in the
RGB-PC mode.
49
PICTURE CONTROL
Colour Tone - User Option
POWER
To adjust red, green, blue to any colour temperature you prefer.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
This menu is activated after selecting “User1” or “User2” in the
Picture Mode.
OK
PR
VOL
VOL
PR
1
PICTURE CONTROL
2
Press the M E N U button and then D /
the Picture menu.
Press the G button and then D /
E
E
button to select
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
button to select
Colour Temperature.
DE F G
3
Press the G button and then D /
E
OK MENU
1
button to select User.
Picture
4
Press the G button and then D /
Green or Blue.
5
Press the F /
G
E
button to select Red,
button to make appropriate adjustments.
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
G
Cool
Medium
Warm
User
OK MENU
2 3
6
Press the E X I T button to return to normal TV viewing.
User
Red
Green
Blue
+30
0
0
Red
G
+30 F
G
E
DE F G
OK MENU
4 5
50
- PICTURE IMPROVEMENT TECHNOLOGY
XD is LG electronic's unique picture improving technology to
display a real HD source through an advanced digital signal processing algorithm.
POWER
TV
It is not possible to use this function in RGB-PC mode.
1
Press the MENU button and then D /
the Picture menu.
E
button to select
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
2
OK
Press the G button and then D /
E
button to select XD.
PR
VOL
VOL
PR
3
E
button to select
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
Press the E X I T button to return to TV viewing.
* Manual Selection
DE F G
OK MENU
1
This menu is activated after selecting the User1 or User2 of P i c t u r e
M o d e.
1
2
Press the G button and then D / E button to select X D
Contrast, XD Colour or XD NR.
Press the G button and then D /
E
PICTURE CONTROL
4
Press the G button and then D /
Auto or Manual.
Picture
Picture Mode
Colour Temperature
XD
G
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
Auto
Manual
button to select On or
Off.
DE F G
OK MENU
2 3
3
Press the E X I T button to return to normal TV viewing.
Manual
XD Contrast
XD Colour
X D C o n t r a s t : Optimises the contract automatically
according to the brightness of the reflection.
A X D C o l o u r : Adjusts the colour of the reflection automatically to reproduce as close as possible to natural
colours.
A X D N R : Removes interference up to the point where it
does not damage the original picture. (It is not possible
to use this function in HDMI, Component (except
480i/576i), RGB-PC mode.)
A
G G
Off
On
XD NR
DE F G
OK MENU
1 2
51
PICTURE CONTROL
DEMO
POWER
Use it to see the difference between XD Demo on and XD
Demo off.
It is not possible to use this function in RGB[PC] mode.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
VOL
PR
VOL
PR
Picture
PICTURE CONTROL
1
Press the MENU button and then D /
the Picture menu.
2
Press the G button and then D /
E
button to select
E button to select XD
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
Demo.
DE F G
3
OK MENU
1
Press the G button to begin XD Demo.
Picture
4
To stop X D D e m o, press the M E N U button.
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
G
To Start
OK MENU
2 3
• XD Demo
XD™ Off
XD™ On
MENU Exit
52
ADVANCED - CINEMA
To set the TV up for the best picture quality for viewing
films.
POWER
1
This feature operates only in Analog TV, AV and
Component 480i/576i mode.
TV
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
Picture
1
Press the M E N U button and then D /
E
button to select
the Picture menu.
2
Press the G button and then D /
E button to select Advanced.
DE F G
OK MENU
1
3
4
Press the G button and then D /
Press the G button and then D /
E button to select Cinema.
E button to select On or Off.
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
5
G
PICTURE CONTROL
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
To Set
OK MENU
2 3
Press the E X I T button to return to normal TV viewing.
Advanced
Cinema
Cinema
Black Level
DE F G
G
Off
On
OK MENU
4
53
PICTURE CONTROL
ADVANCED - BLACK(DARKNESS) LEVEL
When you view a film this function adjust the TV to best picture
quality. Adjusting the contrast and the brightness of the screen
using the black level of the screen.
POWER
This function works in the following mode: AV (NTSC-M) or
HDMI.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
1
Press the M E N U button and then D /
the Picture menu.
E
button to select
PR
VOL
VOL
PR
Picture
PICTURE CONTROL
2
Press the G button and then D /
Advanced.
E
button to select
3
Press the G button and then D /
Level.
E
button to select Black
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
OK MENU
1
4
Press the G button and then D /
or High.
A
A
5
E
button to select Low
L o w : The reflection of the screen gets darker.
H i g h : The reflection of the screen gets brighter.
Press the E X I T button to return to normal TV viewing.
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
DE F G
G
To Set
OK MENU
2 3
Advanced
Cinema
Black Level
DE F G
G
Low
High
OK MENU
4
54
PICTURE RESET
Returns to the default factory setting for Picture Mode, Colour
Temperature, XD, Advanced, Aspect Ratio.
POWER
1
TV
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
VOL
PR
VOL
PR
Picture
Press the M E N U button and then D /
the Picture menu.
2
Press the G button and then D /
Picture Reset.
E
E
button to select
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
Screen
XD Demo
button to select
DE F G
OK MENU
1
3
4
Press the G button to initialize the adjusted value.
Press the E X I T button to return to normal TV viewing.
PICTURE CONTROL
1
Picture
Picture Mode
Colour Temperature
XD
Advanced
Aspect Ratio
Picture Reset
G
To Set
Screen
XD Demo
DE F G
OK MENU
2 3
55
PICTURE CONTROL
IMAGE STICKING MINIMIZATION(ISM)METHOD
A frozen or still picture from a PC/Video game displayed on the
screen for prolonged periods will result in a ghost image
remaining even when you change the image. Avoid allowing a
fixed image to remain on the screen for prolonged periods.
POWER
White Wash
White wash removes permanent images from the screen.
Note: An excessive permanent image may be impossible to
clear entirely with White Wash.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PICTURE CONTROL
Orbiter
Orbiter may help prevent ghost images. However, it is best
not to allow any fixed image to remain on the screen. To
avoid a permanent image on the screen, the screen will move
every 2 minutes.
Option
Inversion
This function inverts the panel colour of the screen.
The panel colour is automatically inverted every 30 minutes.
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
PR
VOL
VOL
PR
DE F G
OK MENU
1
Option
1
2
Press the M E N U button and then D /
select the Option menu.
Press the G button and then D /
ISM Method.
E
E
button to
Language
SIMPLINK
Key Lock
ISM Method
Method
ISM
Low Power
Factory Reset
G
Normal
White Wash
Orbiter
Inversion
button to select
DE F G
OK MENU
2 3
56
3
Press the G button and then D / E button to select
either Normal, White Wash, Orbiter or Inversion.
If you do not need this function, set Normal.
4
Press the E X I T button to return to normal TV viewing.
LOW-POWER PICTURE MODE
This function allows you to reduce the power consumption of the
TV.
POWER
TV
1
On I n - S t o r e mode, even though the Low Power function is On,
it’s ineffective.
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
Press the M E N U button and then D /
select the Option menu.
2
Press the G button and then D /
Low Power.
E
Press the G button and then D /
E
3
E
button to
VOL
PR
Option
button to select
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
button to select
On or Off.
4
PR
VOL
Press the E X I T button to return to normal TV viewing.
DE F G
OK MENU
1
Option
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
DE F G
G
PICTURE CONTROL
1
Off
On
OK MENU
2 3
57
PICTURE CONTROL
FACTORY RESET
It initializes the entire OSD (On Screen Display) settings.
The Installation Guide Setup window is displayed again after the
initialization.
POWER
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
Option
PICTURE CONTROL
1
Press the M E N U button and then use
to select the O p t i o n menu.
2
Press the G button and then use
select F a c t o r y R e s e t.
D
D
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
or E button
or E button to
DE F G
OK MENU
1
3
Press the G button.
4
Press the E X I T button to return to normal TV viewing.
Option
Language
SIMPLINK
Key Lock
ISM Method
Low Power
Factory Reset
DE F G
G
To Set
OK MENU
2 3
58
SOUND & LANGUAGE CONTROL
AUTO VOLUME LEVELER
Auto Volume automatically remains on the same level of volume
if you change programmes.
POWER
1
TV
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
1
Press the M E N U button and then D /
the Audio menu.
E
button to select
PR
VOL
VOL
PR
Audio
2
Press the G button and then D /
Volume.
E
3
Press the G button and then D /
Off.
E
Sound Mode
Auto Volume
Balance
TV Speaker
button to select Auto
0
button to select On or
DE F G
1
4
Press the E X I T button to return to normal TV viewing.
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
G
0
Off
On
1
DE F G
OK MENU
2 3
SOUND & LANGUAGE CONTROL
OK MENU
59
SOUND & LANGUAGE CONTROL
PRESET SOUND SETTINGS-SOUND MODE
You can select your preferred sound setting; Surround MAX,
Standard, Music, Movie or Sports and you can also adjust the
frequency of the equalizer.
POWER
1
Sound Mode lets you enjoy the best sound without any Special
adjustment as the TV sets the appropriate sound options based
on the programme content.
TV
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
S u r r o u n d M A X, S t a n d a r d, M u s i c, M o v i e, and S p o r t s are
preset for optimum sound quality at the factory and are not
adjustable.
OK
PR
VOL
VOL
PR
S u r r o u n d M A X Select this option for the most realistic sound.
Standard
Commanding and natural audio.
Music
Select this option to enjoy the original sound
when listening to music.
Movie
Select this option to enjoy sublime sound.
Sports
Select this option to watch sports broadcasting.
User
Select this option for user-defined audio settings.
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
DE F G
SOUND & LANGUAGE CONTROL
60
0
OK MENU
1
Audio
1
2
Press the M E N U button and then D /
the Audio menu.
Press the G button and then D /
E
E
button to select
button to select
Sound Mode.
3
Press the G button and then D / E button to select
Surround MAX, Standard, Music, Movie, Sports or
User.
4
Press the E X I T button to return to normal TV viewing.
Sound Mode
Auto Volume
Balance
TV Speaker
DE F G
G
0
Surround MAX
Standard
Music
Movie
Sports
User
OK MENU
2 3
SOUND SETTING ADJUSTMENT -USER MODE
Adjusting the audio equalizer.
POWER
TV
1
1
Press the M E N U button and then D /
the Audio menu.
E
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
button to select
PR
VOL
VOL
PR
2
Press the G button and then D /
Sound Mode.
Press the G button and then D /
4
Press the G button.
button to select
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
E
0
button to select User.
DE F G
OK MENU
1
Audio
5
6
Select a frequency band by pressing the F / G button.
Set the desired sound level with the D / E button.
Sound Mode
Auto Volume
Balance
TV Speaker
G
0
Surround MAX
Standard
Music
Movie
Sports
User
Press the E X I T button to return to normal TV viewing.
DE F G
OK MENU
2 3 4
User
SOUND & LANGUAGE CONTROL
3
E
0.1 0.5 1.5 5.0 10 kHz
DE F G
OK MENU
5
61
SOUND & LANGUAGE CONTROL
BALANCE
You can adjust the sound balance of the speakers to the preferred levels.
POWER
1
TV
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
Audio
1
Press the M E N U button and then D /
the Audio menu.
2
Press the G button and then D /
Balance.
E
E
Sound Mode
Auto Volume
Balance
TV Speaker
button to select
button to select
DE F G
SOUND & LANGUAGE CONTROL
62
0
OK MENU
1
3
Press the G button and then F /
desired adjustment.
G
button to make
Audio
Sound Mode
Auto Volume
Balance
R150G
TV Speaker
4
Press the E X I T button to return to normal TV viewing.
1
DE F G
OK MENU
2 3
TV SPEAKERS ON/OFF SETUP
You can adjust the internal speaker status.
POWER
In AV, COMPONENT, RGB[PC] and HDMI mode, internal speaker audio can be operational even when there is no video signal.
If you wish to use an external hi-fi system, turn off the TV
internal speakers.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
Audio
1
2
Press the M E N U button and then D /
the Audio menu.
Press the G button and then D /
E
E
Sound Mode
Auto Volume
Balance
TV Speaker
button to select
0
button to select TV
Speaker.
DE F G
OK MENU
3
4
Press the G button and then D /
On or Off.
E
button to select
Press the E X I T button to return to normal TV viewing.
Audio
Sound Mode
Auto Volume
Balance
TV Speaker
0
G
Off
On
1
DE F G
OK MENU
2 3
SOUND & LANGUAGE CONTROL
1
63
SOUND & LANGUAGE CONTROL
I/II
Stereo/Dual Reception
POWER
When a programme is selected, the sound information for the station appears after
the programme number and station name disappear.
TV
1
2
3
4
5
6
7
8
9
Broadcast
On Screen Display
INPUT
0
MUTE
Mono
MONO
RATIO
EXIT
MENU
Stereo
STEREO
Dual
DUAL I
OK
PR
VOL
A
Mono sound selection
If the stereo signal is weak in stereo reception, you can switch to mono by pressing
the I / I I button twice. In mono reception, the clarity of sound is improved. To switch
back to stereo, press the I / I I button twice.
A
Language selection for dual language broadcast
If a programme can be received in two languages (dual language), you can switch to
DUAL I, DUAL II or DUAL I+II by pressing the I / I I button repeatedly.
FAV
Q.VIEW
SLEEP
I/II
TIME
SOUND & LANGUAGE CONTROL
64
DUAL I
DUAL II
DUAL I+II
Sends the primary broadcast language to the loudspeakers.
Sends the secondary broadcast language to the loudspeakers.
Sends a separate language to each loudspeaker.
VOL
PR
HOLD
SIZE
REVEAL ? INDEX i TEXT
PIP PR
PIP PR
LIST
POSITION
PIP
PIP INPUT
NICAM Reception
If the TV is equipped with a receiver for NICAM reception, high quality NICAM (Near
Instantaneous Companding Audio Multiplex) digital sound can be received.
Sound output can be selected according to the type of broadcast received by pressing the I/II
button repeatedly.
When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O.
2
When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
If the stereo signal is weak, switch to F M M O N O.
3
When NICAM dual is received, you can select N I C A M D U A L I, N I C A M D U A L I I or
N I C A M D U A L I + I I or M O N O.
Speaker Sound Output Selection
In AV, Component, RGB and HDMI mode, you can select output sound for the left and right loudspeakers.
SOUND & LANGUAGE CONTROL
1
Repeatedly press the I / I I button to select the sound output.
L+R: Audio signal from audio L input is sent to the left loudspeakers and audio signal from
audio R input is sent to the right loudspeakers.
L+L: Audio signal from audio L input is sent to left and right loudspeakers.
R+R: Audio signal from audio R input is sent to left and right loudspeakers.
65
SOUND & LANGUAGE CONTROL
ON-SCREEN MENU LANGUAGE SELECTION
The menus can be shown on the screen in the selected language. First select your language.
1
Press the M E N U button and then use D /
Option menu.
E
2
Press the G button and then use D /
button to select Language.
button to select the
POWER
3
Press the G button and then use D /
language.
E
E
button to select your desired
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
Press the O K button
4
PR
VOL
VOL
PR
Press the E X I T button to return to normal TV viewing.
5
SOUND & LANGUAGE CONTROL
66
! NOTE
G
If you intend to be away on vacation, disconnect the power plug from
wall power outlet.
FAV
Q.VIEW
SLEEP
I/II
TIME
HOLD
REVEAL ? INDEX
PIP PR
PIP PR
SIZE
i TEXT
LIST
POSITION
PIP
PIP INPUT
TIME SETTING
CLOCK SETUP
You must set the time correctly before using on/off timer function.
POWER
If current time setting is erased by a power failure or the TV is
unplugged, reset the clock.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
1
Press the M E N U button and then D /
the Time menu.
E
PR
VOL
button to select
VOL
PR
Time
2
Press the G button and then D /
Clock.
E
button to select
3
Press the G button and then D /
E
button to set the hour.
Clock
Off Time
On Time
Sleep Time
Auto Sleep
DE F G
OK MENU
1
Press the G button and then D /
minute.
5
Press the E X I T button to return to normal TV viewing.
E
button to set the
Time
Clock
Clock
Off Time
On Time
Sleep Time
Auto Sleep
DE F G
G
-- : --
OK MENU
2 3 4
TIME SETTING
4
67
TIME SETTING
AUTO ON/OFF TIMER SETTING
The Off time function automatically switches the TV to standby
at a preset time.
POWER
Two hours after the TV is switched on by the on time function it
will automatically switch back to standby mode unless a button
has been pressed.
Once the on time/off time is set, these functions operate daily at
the preset time.
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
The Off time function overrides the On timer function if both are
set to the same time.
PR
VOL
VOL
PR
The TV must be in standby mode for the On timer to work.
Time
1
Press the M E N U button and then D /
the Time menu.
2
Press the G button and then D /
Time/On Time.
E
E
Clock
Off Time
On Time
Sleep Time
Auto Sleep
button to select
button to select Off
DE F G
OK MENU
1
Time
TIME SETTING
3
Press the G button and then D / E button to select On.
• To cancel On/Off Time function, select Off.
4
Press the G button and then D /
E
button to set the hour.
5
Press the G button and then D /
minutes.
E
button to set the
Clock
Off Time
On Time
Sleep Time
Auto Sleep
DE F G
G
-- : -Off
OK MENU
2 3 4 5
Time
6
For On Time function only
• P r o g r a m m e: Press the G button and then D / E button
to select the programme.
• V o l u m e: Press the G button and then D / E button to
adjust volume level at switch-on.
Clock
Off Time
On Time
Sleep Time
Auto Sleep
DE F G
G
07:00
PR
Vol.
On
1
8
OK MENU
2 3 4 5 6
7
68
Press the E X I T button to return to normal TV viewing.
SLEEP TIMER SETTING
You do not have to remember to switch the TV off before you
go to sleep. The sleep timer automatically switches the TV to
standby after the preset time has elapsed.
POWER
TV
1
1
Press the S L E E P button repeatedly to select the number of
minutes. The display ‘
- - - ’ will appear on the
screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
2
When the number of minutes required is displayed on the
screen, the timer begins to count down from the number of
minutes selected.
■
FAV
Q.VIEW
SLEEP
I/II
LIST
You can also set up the Sleep Time in the Time menu.
TIME
Time
Time
Clock
Off Time
On Time
Sleep Time
Auto Sleep
Clock
Off Time
On Time
Sleep Time
Auto Sleep
OK MENU
DE F G
SIZE
PIP PR
G
PIP PR
POSITION
PIP
PIP INPUT
Off
TIME SETTING
DE F G
HOLD
REVEAL ? INDEX i TEXT
OK MENU
! NOTE
G
G
G
To view the remaining sleep time, press the S L E E P button once.
To cancel the sleep time, repeatedly press the S L E E P button until the display ‘
When you switch the TV off, the TV releases the preset sleep time.
- - - ’ appears.
69
TIME SETTING
AUTO SHUT-OFF SETTING
If the TV set is switched on and there is no input signal, it will
switch off automatically after 10 minutes.
POWER
TV
1
2
3
4
5
6
7
8
9
INPUT
0
MUTE
RATIO
EXIT
MENU
OK
PR
VOL
VOL
PR
Time
1
Press the M E N U button and then D /
the Time menu.
2
Press the G button and then D /
Sleep.
E
E
Clock
Off Time
On Time
Sleep Time
Auto Sleep
button to select
button to select Auto
DE F G
OK MENU
11
Time
3
TIME SETTING
4
Press the G button and then D /
Off.
E
button to select On or
Clock
Off Time
On Time
Sleep Time
Auto Sleep
G
Off
On
Press the E X I T button to return to normal TV viewing.
DE F G
OK MENU
2 3
70
TELETEXT
This feature is not available in all countries.
Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news,
weather, television programmes, share prices and many other topics.
The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP and FASTEXT are more modern methods allowing quick and easy selection of teletext information.
SWITCH ON/OFF
Press the T E X T button to switch to teletext. The initial page or last page viewed appears on the screen.
Two page numbers, TV station name, date and time are displayed on the screen headline. The first page number
indicates your selection, while the second shows the current page displayed.
Press the T E X T or E X I T button to switch off teletext. The previous mode reappears.
SIMPLE TEXT
Page selection
1
Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you
press a wrong number, you must complete the three digit number and then re-enter the correct page number.
The D / E button can be used to select the preceding or following page.
2
TELETEXT
A
71
TELETEXT
TOP TEXT
The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field
denotes the next group and the blue field indicates the next block.
A
Block / group / page selection
1
4
With the blue button you can progress from block to block.
Use the yellow button to proceed to the next group with automatic overflow to the next block.
With the green button you can proceed to the next existing page with automatic overflow to the next group.
Alternatively the D button can be used.
The red button return to the previous selection. Alternatively the E button can be used.
A
Direct page selection
2
3
As with SIMPLE teletext mode, you can select a page by entering it as a three digit number using the NUMBER
buttons in TOP mode.
FASTEXT
The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button.
TELETEXT
A
1
2
3
4
72
Page selection
Press the i button to select the index page.
You can select the pages which are colour coded along the bottom line with corresponding coloured buttons.
As with SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER
buttons in FASTEXT mode.
The D / E button can be used to select the preceding or following page.
SPECIAL TELETEXT FUNCTIONS
?
A REVEAL
Press this button to display concealed information, such as solutions to riddles or puzzles.
Press this button again to remove the information from the display.
A SIZE
Selects double height text.
Press this button to enlarge the top half of the page.
Press this button again to enlarge the bottom half of the page.
Press this button again to return to the normal display.
A UPDATE
Displays the TV picture on the screen while waiting for a new teletext page. The display will appear at the top left
hand corner of the screen. When the updated page is available then display will change to the page number. Press
this button again to view the updated teletext page.
A TIME
TELETEXT
When viewing a TV programme, press this button to display the time at the top right hand corner of the screen.
Press this button again to remove the display. In the teletext mode, press this button to select a sub page number. The sub page number is displayed at the bottom of the screen. To hold or change the sub page, press the
RED/GREEN, D / E or NUMBER buttons.
Press again to exit this function.
A HOLD
Stops the automatic page change which will occur if a teletext page consists of 2 or more sub pages. The number of sub pages and the sub page displayed is, usually, shown on the screen below the time. When this button
is pressed the stop symbol is displayed at the top left-hand corner of the screen and the automatic page change
is inactive. To continue press this button again.
73
APPENDIX
TROUBLESHOOTING
The TV does not operate properly
Check to see if there is any object between the TV and the remote control causing an obstruction.
■ Are batteries installed with correct polarity (+ to +, - to -)?
■ Correct remote operating mode set: TV, VCR etc.?
■ Install new batteries.
■
The remote control
does not work
Is the sleep time set?
■ Check the power control settings. Has the Power supply been interrupted.
■ Is Auto sleep activated on this station.
■
Power is suddenly
turned off
The video function does not work.
Check whether the TV is switched on.
■ Try another channel. The problem may be with the broadcast.
■ Is the power cord inserted correctly into the mains?
■ Check your antenna direction and/or location.
■ Test the mains outlet by plugging another TV into the same outlet.
■
No picture &
No sound
P i c t u r e a p p e a r s s l o wly after switching on
■
This is normal, the image is muted during the TV startup process. Please contact your
service center, if the picture has not appeared after five minutes.
Adjust Colour in menu option.
■ Allow a sufficient distance between the TV and the VCR.
■ Try another channel. The problem may be with the broadcast.
■ Are the video cables installed properly?
■ Activate any function to restore the brightness of the picture.
■
No or poor colour
or poor picture
APPENDIX
Horizontal/vertical
bars or picture shaking
Poor reception on
some channels
Lines or streaks in
pictures
74
■
Check for local interference such as an electrical appliance or power tool.
Station or cable channel experiencing problems, tune to another station.
Station signal is weak, reposition the antenna to receive weaker stations.
■ Check for sources of possible interference.
■
■
■
Check antenna (Change the position of the antenna).
The audio function does not work.
Press the F / G button.
■ Sound muted? Press M U T E button.
■ Try another channel. The problem may be with the broadcast.
■ Are the audio cables installed properly?
■
Picture OK &
No sound
No output from one
of the speakers
Unusual sound from
inside the TV
■
Adjust Balance in menu option.
■
A change in ambient humidity or temperature may result in an unusual noise when
the TV is switched on or off and does not indicate a fault with the TV.
There is a problem in PC mode. (Only PC mode applied)
The signal is out of
range.
Vertical bar or stripe
on background &
Horizontal Noise &
Incorrect position
Screen colour is
unstable or single
colour
Adjust resolution, horizontal frequency, or vertical frequency.
■ Check the input source.
■
■
Use Auto configure or adjust clock, phase, or H/V position.
■
Check the signal cable.
Reinstall the PC video card.
■
APPENDIX
75
APPENDIX
MAINTENANCE
Early malfunctions can be prevented. Careful and regular cleaning can prolong the life of your new TV.
Caution: Be sure to swith the power off and unplug the power cord before you begin any cleaning.
Cleaning the Screen
1
A good way to keep the dust off your screen for a while is to wet a soft cloth in a mixture of lukewarm water
and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to
wipe the screen.
2
Ensure there is no excess water on the screen. Allow any water or dampness to evaporate before switching on.
Cleaning the Cabinet
■
■
To remove dirt or dust, wipe the cabinet with a soft, dry, lint-free cloth.
Do not to use a wet cloth.
Extended Absence
CAUTION
If you expect to leave your TV dormant for prolonged periods (such as a holiday), unplug the power
cord to protect against possible damage from lightning or power surges.
APPENDIX
76
PRODUCT SPECIFICATIONS
32PC5R*
MODELS
Dimensions
(Width x Height x Depth)
with stand
without stand
Weight
with stand
without stand
Power requirement
32PC5RV-TB / 32PC5RVH-TB / 32PC5RV1-TB / 32PC5RVC-TB
32PC5RV-TD / 32PC5RVH-TD / 32PC5RV1-TD / 32PC5RVC-TD
819.9 x 599.8x 258.4 mm
32.3 x 23.6 x 10.2 inches
819.9 x 554.2 x 78.1 mm
32.3 x 21.8 x 3.1 inches
16.7kg / 36.8 lbs
15.8kg / 34.9 lbs
AC100-240V~ 50/60Hz
Television System
PAL/SECAM B/G/D/K, PAL I/II, NTSC-M
Program Coverage
VHF: NZ1~E21, UHF: E21 ~ E69, CATV: S1 ~ S20, HYPER: S21 ~ S47
External Antenna Impedance
Operating Temperature
Environment condition Operating Humidity
Storage Temperature
Storage Humidity
❊■
75 Ω
0 ~ 40°C / 32 ~ 104°F
Less than 80%
-20 ~ 60°C / -4 ~ 140°F
Less than 85%
The specifications shown above may be changed without prior notice for quality improvement.
APPENDIX
77
Download PDF